B1201 Releco

RELAYS
www.turck.us
YOUR AUTOMATION SOLUTIONS PROVIDER
PROXIMITY SENSORS
CORDSETS
I/O SOLUTIONS
MEASUREMENT
TURCKs global support network consists of over 2,500 employees in 25 countries and 60 exclusive agencies worldwide that strive to meet customer expectations. Our sales, support and manufacturing facilities are strategically located across the world allowing us to respond to local market conditions and deliver customer specic solutions on a timely basis. We are a world leader in automation technology with a diverse and broad product portfolio that provides customer specic applications with high performance, reliable and cost effective solutions. The synergy in our product portfolio and customization exibility are key components of our value proposition.
RFID
INTERFACE MODULES
Our expertise spans across two major industry categories: Industrial Automation and Process Automation. Each weighs in with its own unique requirements and methods of conducting business. This market centric approach ensures that we develop application specic solutions across a variety of vertical market segments.
CUSTOM CONNECTIVITY
POSITION
NETWORK MEDIA
www.turck.us
B1201
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
TURCK Inc. Minneapolis, MN 55441
RELECO by TURCK RELAYS
Introduction Relays Sockets Timers RINT
6 15 63 83 87
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
B1201
Application General Purpose
Types C2-A20 C3-A30 C4-A40 C5-A20 C5-A30 C7-A10 C7-A20 C7-A20E C9-A41 C10-A10 C10-A10E C12-A21 Universal 8-Pin, Standard Universal 11-Pin, Standard Square Base, 4-Pole Square Base, AC Power Square Base, AC Power Miniature, AC Power Miniature, AC Power Miniature, AC Power Miniature, 14-Pin Plug-in Interface Standard Interface Standard Interface Standard
Poles 2 3 4 2 3 1 2 2 4 1 1 2
AC Ratings 10 A @ 250 V 10 A @ 250 V 10 A @ 250 V 16 A @ 500 V 16 A @ 400 V 16 A @ 250 V 10 A @ 250 V 10 A @ 250 V 5 A @ 250 V 10 A @ 250 V 10 A @ 250 V 5 A @ 250 V
DC Ratings 0.5 A @ 110 V 0.5 A @ 110 V 0.5 A @ 110 V 0.5 A @ 110 V 0.5 A @ 110 V 0.5 A @ 110 V 0.5 A @ 110 V 0.5 A @ 110 V 0.2 A @ 110 V 0.5 A @ 110 V 0.5 A @ 110 V 0.5 A @ 110 V
Page 16 19 28 31 32 38 39 40 48 51 52 56
Sockets S2 S3 S4 S5 S5 S7 S7 S7 S9 S10 S10 S12
Page 64-66 66-69 70-71 71-72 71-72 73-76 73-76 73-76 76-77 78-80 78-80 80-81
Bifurcated Contacts
Low Level Loads
C2-T21 C3-T31 C7-T21 C10-T13 C10-GT13
Universal 8-Pin Plug-in Universal 11-Pin Plug-in Miniature Interface Twin Interface Twin N.O.
2 3 2 1 1
6 A @ 250 V 6 A @ 250 V 6 A @ 250 V 6 A @ 250 V 6 A @ 250 V
6 A @ 30 V 6 A @ 30 V 6 A @ 30 V 6 A @ 30 V 6 A @ 30 V
17 20 41 54 55
S2 S3 S7 S10 S10
64-66 66-69 73-76 78-80 78-80
Bifurcated Contacts
Current Level Loads
C7-H23
Miniature
10 A @ 250 V
6 A @ 30 V
44
S7
73-76
Open Contacts
DC Load Switching Flag Not Available
C2-G20 C3-G30 C5-G30 C7-G20 C10-G10
Universal 8-Pin Plug-in Universal 11-Pin Plug-in Square Base Miniature Interface N.O. Interface N.O.
2 3 3 2 1 2
10 A @ 250 V 10 A @ 250 V 16 A @ 400 V 10 A @ 250 V 10 A @ 250 V 5 A @ 250 V
1.2 A @ 110 V 1.2 A @ 110 V 1.2 A @ 110 V 0.8 A @ 110 V 0.8 A @ 110 V 0.8 A @ 110 V
18 21 33 42 53 57
S2 S3 S5 S7 S10 S12
64-66 66-69 71-72 73-76 78-80 80-81
Flag Available
C12-G21
Double Make
DC Load Switching
C3-X10 C4-X20 C5-X10
11-Pin, DC Power Square Base, DC Power Square Base, DC Power Miniature, DC Power
1 2 1 1
10 A @ 250 V 10 A @ 250 V 16 A @ 400 V 10 A @ 250 V
7 A @ 110 V 7 A @ 110 V 7 A @ 110 V 6 A @ 110 V
23 29 34 43
S3 S4 S5 S7
66-69 70-71 71-72 73-76
Flag Not Available
C7-X10
B1201
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
Application Latching
Types C3-R20 C4-R30 C5-R20 11-Pin Plug-in Square Base, 14-Pin Square Base Miniature
Poles 2 3 3 2
AC Ratings 10 A @ 250 V 10 A @ 250 V 10 A @ 400 V 5 A @ 250 V
DC Ratings 0.5 A @ 110 V 0.5 A @ 110 V 0.5 A @ 110 V 0.2 A @ 110 V
Page 24 30 37 49
Sockets S3 S4 S5 S9
Page 66-69 70-71 71-72 76-77
LED Not Available
C9-R21
Magnet Blow-out
C3-M10 C5-M10 C5-M20
11-Pin Plug-in, High DC Load Square Base, High DC Load Square Base, High DC Load
1 1 2
10 A @ 250 V 16 A @ 400 V 16 A @ 250 V
10 A @ 220 V 10 A @ 220 V 7 A @ 110 V
22 35 36
S3 S5 S5
66-69 71-72 71-72
Sensitive
500 mW - 800 mw
C3-E24 C3-N34
Universal 11-Pin Plug-in Universal 11-Pin Plug-in Miniature
2 3 2
6 A @ 250 V 6 A @ 250 V 5 A @ 250 V
6 A @ 30 V 6 A @ 30 V 5 A @ 30 V
25 26 50
S3 S3 S9
66-69 66-69 76-77
Flag Not Available
C9-E21
Lamp Switching
C7-W10
Miniature, FASTON 187
10 A @ 250 V
0.5 A @ 110 V
45
S7
73-76
Railway Applications
R3-N30D R7-A20D R7-T21D
Universal 11-Pin Plug-in Miniature Miniature, Twin Contacts
3 2 2
6 A @ 250 V 10 A @ 250 V 6 A @ 250 V
6 A @ 30 V 10 A @ 30 V 6 A @ 30 V
27 46 47
S3 S7 S7
66-69 73-76 73-76
Solid State Relay
CSS-AC CSS-AZ CSS-DCN CSS-DCP
Instantaneuos Zero-cross Common Negative Common Positive
1 1 1 1
3 A @ 250 V 3 A @ 250 V N/A N/A
N/A N/A 2 A @ 50 V 2 A @ 50 V
60 61 59 58
S10 S10 S10 S10
78-80 78-80 78-80 78-80
Time Cube
CT2 CT3
8-Pin Plug-in Timer Module 11-Pin Plug-in Timer Module
2 3
10 A @ 250 V 10 A @ 250 V
0.5 A @ 110 V 0.5 A @ 110 V
84-85 84-85
S2 S3
64-66 66-69
Interface Module
RINT
Interface Module
N/A
6 A @ 250 V
2 A @ 24 V
88-91
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
B1201
System Features & Benefits

Button and lockable level with 3 functions Mechanical and LED indication as standard Coil voltage marked on top of the relay Label
Five Colors for Easy Identification of Coil Voltage

Red: 120 VAC
Optional built-in suppressor Part number and technical information marked on the side of the relay Color coded test button Industrial terminals FASTON.098 (2.5 mm)
AC
Maroon: AC other than 120 V Grey: VAC/DC Dark Blue: DC other than 24 V Blue: 24 VDC
DC
If you do not want the lockable function, you can use the orange dead-man-push-button. S0-OP for MRC and S9-OP for QRC (5 piece bag).
Dead-man-push-button
A black blanking plug is available if you don't want a test button. S0-NP for MRC and S9-NP for QRC (5 piece bag).
Push-to-Test-Pull-to-Lock button (PTPL) Coil voltage marked on the top face of the relay LED
Label Double window for the mechanical identification LED
Blanking Plug
Comprehensive Technical Label

Coil Power Wiring diagram with sequential and DIN numbers Electrical diagram showing all additions to the coil Maximum switching capacity according to EN 60947 (IEC 947) Approvals
Label
Country Canada China Russia
Approval
Authority: CSA Specication: C 22.2; UL 508 Authority: CQC Specification: GB14048.5-2001 Authority: KORPORATSIA STANDARD Specification: GOST R 50030.5.1
Country
Approval
United Kingdom
Authority: Lloyds Register of Shipping
USA
Authority: UL Specification: C 22.2; UL 508
B1201
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
Industrial Relays MRC, QRC, IRC Part Number Key

Part Number Keys are to assist in IDENTIFICATION ONLY. Consult factory for catalog items not identied.
C n(n) Normal Industrial Relay code

Relays with code R are used for railway series.
y zz
/...V
Ref. nnnn
Ref. nnn
Relays with a reference number are versions with special (e.g. customised) features. These features may relate to special test criteria, tolerances or other properties. Availability of such relays may be limited to certain customers or applications.
Basic type refers to the product line

Numbers between 2 and 12 are used.
Nominal coil voltage or current Relay Type

AC V, DC V, UC V (AC/DC), AC A, DC A A E G H = = = = Standard (general-purpose) contact Sensitive drive with 500 mW coil power Refers to a NO contact Single-point contact + twin contact load to signal current circuit for switching state feed back. Mixed contact configuration Relay with highly effective neodimium blow magnet for fast quenching of the arc. This relay is particularly suitable for high DC loads. Sensitive drive 800mW coil power Code for remanence relays, drive-specific ID Sensitive drive with 250 mW exciter input Twin contact for signal and control circuit With tungsten contact for maximum switch-on currents Relays are generally available for voltages of 6 V. DC 220 V/AC 240 V (AC 400 V) or UC 6 . 48 V. Current relays available on request.
M =
Options
D F R X B = = = = = Integrated freewheeling diode Integrated freewheeling diode and series diode e.g. for common alarm circuits RC connection for the coil Electric position indicating device with LED Bridge rectifier
N R S T W
= = = = =
Definition of Contact Material

This code may differ depending on type. Examples: 0 = in the standard range stands for AgNi 1-9 = see contact material for each type
Number of Contacts
Product range Releco offers a wide range of relay types and versions and associated bases and accessories. Standard (general-purpose) relay, MRC series 35 x 35 mm round plug-in relay, 8- or 11- terminals multipole connector according to IEC 67 with 2 or 3 contacts up to 10 A and different contact types and contact materials. Standard relay 35 x 35 mm with at blade connectors with up to 4 contacts and up to 16 A with 3 contacts. Miniature industrial relay, QRC series 22.5 mm series with up to 4 contacts and up to 10 A with 1 or 2 contacts Interface relay, IRC series Overall width 13 mm with up to 2 electromechanical contacts, or fully electronic switches. Special relays, remanence relays While "normal" relays are monostable, i.e. they return to the idle state when the excitation is switched off, remanence relays are bistable, i.e. the current switching state is retained irrespective of the excitation. Relays of this type are available in different versions.
Electronic relay, CSS In the IRC series different electronic DC or AC relays up to 3 A are available. For AC relays a distinction is made between synchronously (zero crossing) and asynchronously switching versions. For switching transformer loads we recommended using asynchronously switching semiconductor switches. For incandescent lamp loads etc. synchronously switching switches are ideal for avoiding high switch-on currents. Accessories Suitable bases are available for the different relay series for DIN rail mounting or panel mounting. In addition, retaining clips are available for the relays, some of which are included in the scope of supply. Suitable bridges for cost-saving wiring in series are also available.
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
B1201
General Information
Terminology and Technical Information

Contact Materials Silver-nickel (AgNi) and silver-tin oxide (AgSnO2) are used as standard contact materials for all models. Other contact materials are available on request. Gold Flash For relays that are intended to be stored or remain unoperated for any length of time, a 0.2 layer of gold protects the contacts from oxidization. Gold Plating A 10 plate of gold increases the operational reliability. It should be used for switching low level currents. Contact Resistance Contact resistance is dependent on contact material, contact pressure and contact contamination. High contact resistance raises the temperature of the contacts, therefore reducing their working life. Typical contact resistance of the MR-C and QR-C relays is 50 m. Contacts Gap Contact gap and opening speed of the contacts have an influence on the length and the duration of the arc. In the case of AC, a gap of 0.5 mm is sufficient to quench the arc which occurs automatically at the zero point of the cycle. In the case of DC, the arc only quenches when the contact gap is sufficient for the voltage and current applied. Please see tables of Max. DC Current. Coil Materials Coil bobbins are molded in polybutylene with fiberglass (130C). Enamelled wires of Class F specification are used (155C). They are wound on precision automation winding machines, with the number of turns and wire tension accurately regulated and monitored. Tolerances Coil resistance is measured at 20C and is regulated within 10% of specified value. Standard Windings The coil voltages indicated in the catalog refer to standard windings. Other coil voltages are available, including products for series connection and amperometric applications. Please consult your distributor for details. Maximum Itntensity The Max. switching current indicated in every model, refers to the maximum stable current which should be possible in permanent conduction (ITH). In the case of AC, the Max. switching current that the relay can support is the same for all the values of voltages of the Max. switching voltage specified in every model. The product of the intensity and the voltage applied should not be higher than the values specified as Max. AC load. In the case of DC, the Max. switching current must be less than the current that causes the continuous arcing. The tables of Max. DC current show the possible values of intensity in relation to the applied voltage. Maximum Voltage The maximum voltage on the contacts depends on the insulation between each contact (pole-to-pole) and between all contacts and the coil. The EN 60947 and VDE 0110 standards set out the maximum voltage values, taking into consideration the quality of the insulation materials, pollution degree as well as the shape and dimensions of the contact barriers (creepage distance). Contacts in Series The connection of two or more contacts in series is equivalent to multiplying the contact gap by that amount. By using this method, a greater break capacity is achieved for DC switching. Minimum Working Voltage (pull in) This is the minimum voltage that must be supplied to the coil to ensure that the relay energizes, the contacts change over and are positively held in place without any vibration. The values of voltage specified are those at or below which the relay must pull in. Working at: AC 50 Hz Relays AC 60 Hz Relays DC Relays
50 Hz 60 Hz
Contacts in Parallel The connection of two or more contacts in parallel does not mean that it is possible to switch a greater load. However, the stable current and the operational reliability of the relay is increased. Double Make Contacts The double make contact arrangement is equivalent to two contacts connected in series. The maximum intensity supported corresponds to only one contact. This system allows for higher DC operating voltages. Bifurcated (Twin) Contacts The contact blade is divided into two parts, each with its own contact. Both contacts press down on their own independent fixed contacts. This system is particularly good for switching at very low levels of current. Contact Protection The electrical life of contacts can be prolonged by components which eliminate or reduce the back EMF transients. These voltages are generated by the reactive component of the load on disconnection, which increases the duration and the temperature of the arc. For AC, RC suppressors or varistors can be connected in parallel with the load or the contacts. For DC with an inductive load, the best method is to connect a diode in parallel with the load. Ambient Temperature The ambient temperature has an influence on the coil resistance and on its thermal dissipation capacity. Curve 1 represents the variations of the pull in voltage (%Un) in relation with the ambient temperature (T). Curve 2 indicates the maximum values of the voltage applied (Ub) to the coil in relation with the nominal voltage (Un) at the ambient temperature (T).
Ub /Un 1.7 1.5 1.3 1.1 0.9 0.7 0.5 -20 -5 10 25 40 55 70 TC
1 2
0.8xUn 0.85xUn 0.75xUn 0.8xUn 0.8 x Un Maximum Release Voltage (drop out) This is the voltage at which the relay de-energizes, the contacts change over and are positively held in place without any vibration.
The values of voltage specified are those at or above which the relay must drop out. DC relays 10% Un AC relays 20% Un 8 B1201
www.turck.us 1-800-544-7769
Fax: (763) 553-0708
General Information
Relay Types Based on Applications

A
General Purpose Relays These are used for most general applications, such as automation, pneumatic, heating appliances, signaling, as an input or output interface, etc.
Relays with Open Contacts An open contact arrangement allows an increase in the contact gap, increasing the DC break capacity without altering the AC performance. Gap: 1.5 mm(QR-C types); 1.7 mm(MR-C) Isolation of contacts NO: >2000 Vrms Maximum load: 16 A @ 230 V AC1 1.2 A @ 110 V DC1 0.4 A @ 220 V DC1 Double Make Relays These relays are designed to switch high DC loads at voltages of 110 and 220 VDC. If consists of one normally open contact with a gap > 3 mm so that the arc length is divided by two. Isolation between contacts: >2000 Vrms The max. DC load is shown in the tables. X versions are available in MR-C and QR-C type housing. High Inrush Current Relay Two open contacts, one of silver nickel and one of tungsten work in parallel but are physically displaced so that the tungsten contact makes and breaks the load. The silver contact is used for carrying the stable current. This relay was designed to switch incandescent and fluorescent lamps, (with p.f corrected), and DC inductive loads. Only available in C7 type housing. Maximum loads: 6 A @ 230 V AC5a/b (lamps) 10 A @ 230 V AC15 1.5 A @ 110 V DC1
Change-over contacts. Isolation between N.O./N.C.: 1000 Vrms Gap: 0.5 mm Rating loads of up to: 16 A @ 230 V AC1 16 A @ 30 V DC1 0.5 A @ 110 V DC1 0.2 A @ 220 V DC1 Relays with Twin Contacts These are used to switch low currents with high operational reliability.
Relays with Mag. Blow Out These versions are similar to X types, however they have an addition of a powerful magnet which blows out the arc generated when the contacts are opened, therefore quenching the arcing quickly and increasing the contact life. They are able to switch DC loads of up to 10 A @ 222 V DC1 and 2 A @ 220 V DC13 Remanence Relays A high remanence magnetic circuit allows the relay to latch positively when the current applied flows through the coil in a direction and delatches if the current flows in the opposite direction. Electronic circuitry is added inside the relay to control this action and also protects against transient voltages. There is one winding for AC coils and two windings for DC coils. All coils withstand permanent connection. The relay can be operated with pulses of 50 ms, minimum, at nominal voltage. Specifications The data referred to in the specifications for each model refers to typical values of new relays at 20C. Tables The tables of electrical life and the tables of maximum DC current show the typical result of exhaustive tests performed at an ambient temperature of 20C, operating frequency of 1,200 operations/hour, and under permanent connection. The switching current ratings specified in the catalog refer to a minimum electrical life of 100,000 operations. Margin of Over-Voltage Coils withstand, on permanent conection, a maximum over-voltage of 110 percent Un, with rated current through the contacts at an ambient temperature of 60C. Custom Relays Relays with special specifications can be supplied after consultation with an official RELECO distributor.
A1
Change-over contacts. Isolation between contacts N.O./N.C.: 1000 Vrms Gap: 0.5 mm Gold-flashed contact 0.2 or plated with 10 Au (optional). Maximum load: 6 A @ 230 V AC1 Minimum load: 1 mA @ 5 V DC1 Sensitive Relays, 250 mW One change-over contact Sensitive Relays, 500 mW Two change-over contacts Sensitive Relays, 800 mW Three change-over contacts
S E N
DC relays adjusted to work at lower power, available in both MR-C and QR-C versions. Gold-flashed contacts 0.2 or plated 10 Au (optional). Operational voltage range: S relays: 0.8 - 2.5 Un E relays: 0.8 - 1.7 Un N relays: 0.8 - 1.4 Un
A3
A1 A3
A2 A2
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
B1201
General Information
Coil Accessories
MRC - QRC
Protection Against Transients When the coil is disconnected from an electromagnet, peaks of inverse voltage appear at the terminals which can reach very high values. These pulses can be transmitted down the line associated with the coil and could possibly affect other components. In the case of a relay being operated by such devices as transistors, triacs, etc; it may be necessary to protect against transients. Transients Carried in the Line High voltage surges can be carried in the supply line to the relay coil. These may appear in the form of peaks or bursts and are generated by the connection and disconnection of electric motors, transformers, capacitors, etc. Normally a relay is unaffected by these pulses, but if a diode is connected in association with the coil, it must be capable of withstanding an inverse voltage higher than those of the incoming peaks. Protection Circuits A protection circuit must efficiently cope with pulses generated by the coil as well as incoming line surges (surges U1.2/50s.). RELECO relays are available with integrated protection circuits or with modules plugged into sockets S3-MP or S3-MS. X LED indication with rectifier. For DC and AC relays up to 250 V Surges of 1000 V up to 24 V Surges of 2000 V from 25 to 60 V Surges of 4000 V from 61 to 250 V Note: LED connected in series with the coil @ 220 VDC in QRC types. X D Free-wheeling diode. DX Free-wheeling diode + LED Dampens transients caused by the relay coil on de-energization. Surges of 2000 V up to 60 VDC Surges of 4000 V from 61 to 250 VDC (*) F Polarity and free wheeling diodes.
IRC
LED and protection circuit connected to coil. X LED with no polarity, (standard) Coils 12 V CC and CA LED rectifier bridge in parallel LED with no polarity, (standard) Coils 24 V CC and CA LED rectifier bridge in series
FX LED with polarity A1+ (option) Every DC coil voltage Polarity and Free-wheeling diodes BX LED with no polarity, (option) Only 24 V and 48 V AC/DC coils Rectifier bridge for AC/DC relays R LED not available (option) Every AC coil voltage RC protection against pulses on AC
FX Polarity + free wheeling diode + LED A diode in series with the coil protects the relay from reverse connection. Surges of 1000 V up to 60 VDC Surges of 4000 V from 61 to 250 VDC (*) B Bridge rectifier incorporated.
BX Bridge rectifier + LED indication. Allows the relay to operate in both AC or DC without any polarity inconvenience. Available only in voltages up to 60 V Surges of 1000 V R Resistor and capacitor. Suppressor for AC coils. Surges of 2000 V Available only in MRC types (*) Surges of 2000 V in QRC types.
Protection Against Pulses When a relay coil is disconnected, reverse voltage peaks may arise and reach very high values. Said peaks can transmit to the coil associated line and other relays or semiconductors can be affected. If triac, transistor, etc. controls a relay, appropriate steps must be taken to avoid or decrease peaks down to a non-risky level. Both polarity and free-wheeling diodes (FX), must protect coils, to avoid malfunctions, provided DC relays in battery are installed. Making or breaking engines, transformers or contactors in an industrial environmental, may generate high voltage pulses, either isolated or burst, through the main line. The voltage level of those pulse may be high enough to affect the isolation of the coil.
X
A1 A2 A2 A1
F
+
A1
FX
+
A2
LED consumption: 1 mA
Increases release time approx. 4 times
A1 A2
X 12 V A1
BX
D
A1
DX
A1
B
A1 A2 A1
BX
X 24 V A1
A2 A1 R
A2
A2
A2
A2

A1
FX
A2
R
A1 A2
A2
10
B1201
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
IRC
Interface Applications
Total Interconnection, Bridge Bars for Coil and Power Lines

Bridge Bars Connection on S10-M and S12 Sockets
Examples of mounting. Not at scale.
New S10-M and S12 sockets and new connection bridges B20, V10 and V40 permit quick and easy wiring for relays in battery, in groups or in any other combination of voltages, coils or contacts. Every bridge allows mounting with a hybrid configuration of S10-M and S12 sockets. The immediate identification of the different circuits means a lower mounting cost, inspection or maintenance. Available in grey (standard), red (AC) and blue (DC), following the same color coding adopted by RELECO in testing buttons to identify its relays.
V40 Bridge Bars for Power Lines

V40 bridges allow joining common points in the power connection, usually the change-over contacts 11 or 21 on relays. They can be also used to bridge NC or NO terminals. V40 bridges join four similar points in four adjacent sockets. They can join among themselves or to V10 units to bridge an unlimited number of sockets in any combination. Made of copper with a current capacity of 40 A.
V10 Bridge Bars for Power Lines

V10 bridges connect a single socket to the next socket, so can you bridge less or more than four sockets, as long as the total number of sockets is not a multiple of four. They can join between themselves or to V40 units. If you need to bridge five sockets, you can either use a V40 + 1 V10 or four V10 bridges. Made of copper with a current capacity of 40 A.
It is necessary that the total sum of loads in a relay group will not exceed the maximum intensity of 40 A, permitted by the power bridges. If exceeded, the essential power cables must be added, to share the current and avoid overheating the bridges. Every inlet terminal admit ferrule tips up to 4 sq. mm. DC 24 V Power supply for loads at points 1 and 3 1 V10 bridge 1 V40 bridge DC 24 V Power supply for loads at points 1 and 3 AC 230 V Power supply for loads at points 1 and 3 2 V10 bridges
12 11 14 12 11 14 12 11 14 12 11 14 12 11 14 12 11 14 12 11 14 12 11 14 12 11 14 3 2 1 3 2 1 3 2 1 3 2 1 3 2 1 3 2 1 3 2 1 3 2 1 3 2 1
22 21 24 22 21 24 22 21 24 22 21 24 9 1-Pole Relay AC 230 V 1-Pole Relay AC 230 V 8 7 9 8 7 9 8 7 9 8 7 1-Pole Relay AC 24 V 1-Pole Relay AC 24 V 1-Pole Relay AC 24 V
2-Poles Relay DC 48 V
2-Poles Relay DC48 V
S10-M
5 6 4
S10-M
5 5 6 6 4 4 5
S12
6 4 5
S12
6 4 5
S12
6 4 5
S12
6 4
S10-M
5 6 4
S10-M
5 6 4
S10-M
5 6 4
A2 A2 A1 A2 A2 A2 A2 A1 A1 A2 A2 A1 A2 A2 A1 A2 A2 A1 A2 A2 A1 A2 A2 A1 A2 A2 A1 A2 A2 A1 3 B20 bridges AC 230 V Common DC 48 V Common AC 24 V Common 2 B20 bridges
B20 Bridge Bars for Coil Lines

Both sockets are accessible to point A2 from terminals 5 and 6, internally connected. Each element connects point 6 of the first socket to point 5 of the next one, always leaving free the point 5 of the first socket and the point 6 of the last one, to connect the common polarity cable. Coils control voltage connect to points A1. Bridge B20 is composed by four units which can be divided in 1, 2 or 3 elements.
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
B1201
11
IRC V40
V10
B20
Coil Bridge Bars for Sockets S10-M and S12
Power Bridge Bars for Sockets S10-M and S12
V40 bridges join four similar points in four adjacent sockets. They can join among themselves or to V10 units to bridge an unlimited number of sockets S10-M and S12 in any combination. V10 bridges connect a single socket to the next socket, so you bridge less or more then four sockets. Made of copper with a current capacity of 40 A. See more information on page 11.
B20 bridges points A2, internally connected, of every adjacent socket S10-M or S12. Each element connects point 6 of the first socket to point 5 of the next one, always leaving free the point 5 of the first socket and the point 6 of the last socket, to connect the common polarity cable. See more information on page 11.
V40-G
V10-G
B20-G
V40-R
V10-R
B20-R
V40-A
V10-A
B20-A
IEC 61810 EN 60947
IRC relays, E version Types C14... and C15... Cover for flange panel mounting
Ordering code: Add E to the standard type code. Example: C14-A10E or C15-A21E
12
B1201
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
IRC

I/O sockets, IRC relays and bridge bars allow more flexible, economical and aesthetic mounting in interface and general applications.
S10-M and S12 sockets of 1 and 2 contacts, with inlets in line and identical disposition of contacts set. Identical sequence of coil and contacts on both sockets. Coil terminal on level 1: Contact terminals on level 1: Contact terminals on level 2: (A2, A2, A1) (12, 11, 14) (22, 21, 24)
Bridge bars between A2 coil terminals with 2 free inlets to connect a commom polarity cable. Those bridge bars are isolated and divisible by hand, in single units. Power bridges with current capacity of 40 A to be connected between contacts 11 or 21 in any combination: Groups or battery of relays, to supply the power current to the loads. Inlet terminals admit ferrule tips up to 4 mm2.
Common Polarity Cable for Coils
Bridges in grey color as standard. Options: Adopted colors by RELECO used in the testing buttons of relays: Blue, to identify DC circuits Red, to identify AC circuits
B20 Bridge Bars for Coil Line
V40 and V10 Bridge Bars for Power Line

Common Power Supply Cable for Loads
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
B1201
13
IRC
Total Interconnection, Solid State Relays

How to Mount Solid State Relays as Interface on PLC
Input In every CSS relay, the input on terminals A1 and A2 is 5-32 VDC, with no polarity. If bridges to joint points A2 are used, a single voltage can be applied on terminals A1, for every relay, or different voltages within the range 5-32 VDC. Output DC or AC (Independent Relays) When using a single relay of any model, load can be connected either on terminal 1 or terminal 2. Relays with Output on DC (CSS-DCP or CSS-DCN). Range of voltage applied to the load will be 5-50 VDC. Relays with Output on AC (CSS-AC, Inductive Loads, or CSS-AZ, Resistive Loads). Range of voltage applied to the load will be 24-250 VAC, 50/60 Hz. Output on DC (Relays in Battery) If power bridges are used with S10-M sockets in series of relays in line, it is necessary to attend the common polarity chosen to the loads connection. Usually the point 2 (11 DIN) is the common point of the socket where positive tension is applied to the loads. Then CSS-DCP relays must be connected where terminal 2 is common positive. Said disposition complies Norm EN-60204-1-5,3,3 where cutting every active element of its feeding is suggested, that means to switch from the positive. If point 2 of the socket is taken as negative, relays type CSSDCN, where terminal 2 is negative must be connected. For relays CSS-AC or CSS-AZ, only whether the load is inductive or resistive has to be considered, as they have no polarity.
PLC Input Terminals

5 - 50 VDC Load 1 Load 2 Load 3
+
12 11 14 12 11 14 12 11 14 3 2 1 3 2 1 3 2 1
5 - 50 VDC
Input 1
Input 2
Input 3
+
12 11 14 12 11 14 12 11 14 3 2 1 3 2 1 3 2 1
CSS-DCP S10-M 5 6 4
CSS-DCP S10-M 5 6 4
CSS-DCP S10-M 5 6 4
CSS-DCP S10-M 5 6 4
C10-T13X S10-M 5 6 4
CSS-DCP S10-M 5 6 4
A2 A2 A1 A2 A2 A1 A2 A2 A1 5 - 32 VDC
A2 A2 A1 A2 A2 A1 A2 A2 A1
PLC Output Terminals
24 - 250 VAC
24 VDC
14 B1201
www.turck.us
Out 1 Out 2 Out 3 24 VDC Sensor PNP Switch Sensor PNP
+
Load 3 3A Ind. Load 4 3A Res. Load 5 3A Ind. Load 6 10A Res. Load 7 6A Res. Load 8 3A Ind.
Load 1 2A Ind.
Load 2 3A Res.
12 11 14 12 11 14 12 11 14 12 11 14 12 11 14 12 11 14 12 11 14 12 11 14 3 2 SS-AC S10-M 5 6 4 5 1 3 2 1 3 2 1 3 2 1 3 2 1 3 2 1 3 2 1 3 2 1
CSS-AZ S10-M 6 4
CSS-AC S10-M 5 6 4
CSS-AZ S10-M 5 6 4
C10-A10X S10-M 5 6 4
C10-A10X S10-M 5 6 4
C10-A10X S10-M 5 6 4
CSS-AC S10-M 5 6 4
A2 A2 A1 A2 A2 A1 A2 A2 A1 A2 A2 A1 A2 A2 A1 A2 A2 A1 A2 A2 A1 A2 A2 A1
Out 1 Out 2 Out 3 Out 4 Out 5 Out 6 Out 7 Out 8
PLC Output Terminals

1-800-544-7769 Fax: (763) 553-0708 TURCK Inc. Minneapolis, MN 55441
RELAYS
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
B1201
15
MRC
2-Pole, Standard 8-Pin Plug-In Relay
C2-A20
General purpose Two pole, change-over contacts
Relay compatible with sockets:
S2-B, S2-S, S2-L, S2-PO
10 A 250 V AC1 10 A 30 V DC1

Contacts
Materials:
0.5 A 110 V DC1 0.2 A 220 V DC1

AgNi AgNi + 10 Au AgNi + 0.2 Au 10 A 30 A 250 V 2.5 KVA
4 3
12 14
5 6
22 24
2
A1 (+)
11
21
A2
Standard, code 0 Optional, code 8 Optional, code 9 Max. switching current Max. peak inrush current (20 ms) Max. switching voltage Max. AC load (Table 1) Max. DC load (Table 2)
Table 1
Electrical Life, ops. x 106
Coils (Ohms 10% @ 20C) Pull-in voltage Drop-out voltage Nominal coil power
VAC 24 48 115 230
0.8 x Un 0.1 x Un 2.2 VA (AC)/1.3 W (DC) VDC 24 48 110 220
67 296 1K7 7K1
mA 92 46 19 9.5
433 1K8 9K2 36K1
mA 54 27 12 6
Insulation
Table 2
Max. DC Load
Dielectric strength (1 minute): Open contacts Between adjacent poles Between contacts and coil Isolation resistance at 500 V Isolation, IEC 61810-5:
1,000 V 2.5 KV 2.5 KV 1 G 2.5 KV/3
Specifications
Operate time + bounce time 16 ms Release time + bounce time 8 ms Ambient temperature -40C (no ice) to +70C Mechanical life ops. 10 Mill. AC, 20 Mill. DC relay Electrical life at nominal load 100,000 ops. Operating frequency at nominal load 1,200/hour Protection degree IP 40/RT1 Weight avg. 90 g
Dimensions - mm
8 1
Standard Types
A2
7
A1
2
35
AC 50 Hz, (60 Hz): 24, 48, 115, (120), 230, (240) X = LED (standard) C2-A20X ........VAC RC suppressor C2-A20R........VAC DC 24, 48, 110, 220 X = LED, no polarity (standard) C2-A20X ....... VDC Free-wheeling diode C2-A20DX .... VDC Polarity and free-wheeling diodes C2-A20FX..... VDC AC/DC bridge rectifier (24, 48 or 60 V) C2-A20BX .... VDC
35
58.5
Lloyds 16 B1201
www.turck.us 1-800-544-7769 Fax: (763) 553-0708
IEC 61810 EN 60947

MRC
2-Pole, Twin Contacts 8-Pin Plug-In Relay
C2-T21
Low level Two change-over bifurcated contacts
S2-B, S2-S, S2-L, S2-PO
6 A 250 V AC1 6 A 30 V DC1 Min. contacts load: 1 mA / 5 V DC1

Contacts
Materials: Standard, code 1 Optional, code 2 Max. switching current Max. peak inrush current (20 ms) Max. switching voltage Max. AC load (Table 1) Max. DC load (Table 2) AgNi + 0.3Au AgNi + 10Au 6A 15 A 250 V 1.2 KVA
4 3
12 14
5 6
22 24
2
A1(+)
11
21
A2
Table 1
10
VAC 24 48 115 230
AC1 AC1 Ops.
67 296 1K7 7K1
mA 92 46 19 9.5
433 1K8 9K2 36K1
mA 54 27 12 6
0.1 0 250 500 750 VA 1000 1250
Insulation
Dielectric strength (1 minute): Open contacts Between adjacent poles Between contacts and coil Isolation resistance at 500 V Isolation, IEC 61810-5: 1,000 V 2.5 KV 2.5 KV 1 G 2.5 KV/3
Table 2
Max. DC Load
Specifications
Operate time + bounce time 16 ms Release time + bounce time 8 ms Ambient temperature -40C (no ice) to +70C Mechanical life ops. 10 Mill. AC, 20 Mill. DC relay Electrical life at nominal load 100,000 ops. Operating frequency at nominal load 1,200/hour Protection degree IP 40/RT1 Weight avg. 90 g
Dimensions - mm
8 1
Standard Types
A2
7
A1
2
AC 50 Hz, (60 Hz): 24, 48, 115, (120), 230, (240) X = LED (standard) C2-T21X ........VAC RC suppressor C2-T21R ........VAC DC 24, 48, 110, 220 X = LED, no polarity (standard) Free-wheeling diode Polarity and free-wheeling diodes AC/DC bridge rectifier (24, 48 or 60 V)
35
35
C2-T21X ....... VDC C2-T21DX..... VDC C2-T21FX ..... VDC C2-T21BX..... VDC
58.5
IEC 61810 EN 60947

www.turck.us 1-800-544-7769 Fax: (763) 553-0708 TURCK Inc. Minneapolis, MN 55441
B1201
17
MRC
C2-G20
General purpose, DC applications Two pole open contacts
S2-B, S2-S, S2-L, S2-PO
10 A 250 V AC1 10 A 30 V DC1

Contacts
1.2 A 110 V DC1 0.4 A 220 V DC1

AgNi 10 A 30 A 250 V 2.5 KVA
2
A1(+)
Materials: Standard, code 0 Max. switching current Max. peak inrush current (20 ms) Max. switching voltage Max. AC load (Table 1) Max. DC load (Table 2)
Gap 1.7 mm
A2
Table 1
Coils (Ohms 10% @ 20C)

Pull-in voltage Drop-out voltage Nominal coil power VAC 24 48 115 230
65 286 1K7 6K8
mA 100 50 21 10
360 1K4 7K6 30K3
mA 66 34 15 7.5
Insulation
Table 2
Max. DC Load
Dielectric strength (1 minute): Open contacts Between adjacent poles Between contacts and coil Isolation resistance at 500 V Isolation, EN 61810-5:
2,000 V 2.5 KV 2.5 KV 1 G 2.5 KV / 3
Specifications
Operate time + bounce time 20 ms Release time + bounce time 10 ms Ambient temperature -40C (no ice) to +70C Mechanical life ops. 10 Mill. AC, 20 Mill. DC relays Electrical life at nominal load 100,000 ops. Operating frequency at nominal load 1,200/hour Protection degree IP 40/RT1 Weight avg. 90 g
Dimensions - mm
8 1
Standard Types
A2
7
A1
2
AC 50 Hz, (60 Hz): 24, 48, 115, (120), 230, (240) X = LED (standard) C2-G20X........VAC RC suppressor C2-G20R .......VAC DC 24, 48, 110, 220 X = LED, no polarity (standard) Free-wheeling diode Polarity and free-wheeling diodes AC/DC bridge rectifier (24, 48 or 60 V)
35
35
C2-G20X....... VDC C2-G20DX .... VDC C2-G20FX .... VDC C2-G20BX .... VDC
58.5
IEC 61810 EN 60947 18 B1201

MRC
C3-A30
General purpose Three pole, change-over contacts
S3-B, S3-S, S3-MP, S3-MS, S3-L, S3-PO
10 A 250 V AC1 10 A 30 V DC1

Contacts
Materials:
0.5 A 110 V DC1 0.5 A 220 V DC1

4 3
12 14
5 7
22 24
8 9
32 34
2
A1(+)
11
21
31
A2
11
10
Table 1
10
VAC 24 48 115 230
0.8 x Un 0.1 x Un 2.2 VA (AC)/1.3 W (DC)
AC1 AC1 0.4 Cos AC15 Ops.
67 296 1K7 7K1
mA 92 46 19 9.5
VDC 24 48 110 220
433 1K8 9K2 36K1
mA 54 27 12 6
0.1 0.5 1 1.5 KVA 2 2.5
Insulation
Table 2
10
Max. DC Load
DC1 DC1 L/R 40ms DC13

Amps. 1
Specifications
0.1 50 100 Volts 150 200
Dimensions - mm
A2
10
Standard Types
11 1
2
A1
AC 50 Hz, (60 Hz): 24, 48, 115, (120), 230, (240) X = LED (standard) C3-A30X ........VAC RC suppressor C3-A30R........VAC DC 24, 48, 110, 220 X = LED, no polarity (standard) Free-wheeling diode Polarity and free-wheeling diodes AC/DC bridge rectifier (24, 48 or 60 V)
35
58.5
35
C3-A30X ....... VDC C3-A30DX .... VDC C3-A30FX..... VDC C3-A30BX .... VDC
Lloyds
IEC 61810 EN 60947 B1201 19
MRC
3-Pole, Twin Contacts 11-Pin Plug-In Relay
C3-T31
Low leveL Three change-over bifurcated contacts
6 A 250 V AC1 6 A 30 V DC1 Min. contacts load: 1 mA / 5 V DC1

Contacts
Materials: Standard, code 1 Optional, code 2 Max. switching current Max. peak inrush current (15 ms) Max. switching voltage Max. AC load (Table 1) Max. DC load (Table 2) AgNi + 0.3Au AgNi + 10Au 6A 15 A 250 V 1.2 KVA
4 3
12 14
5 7
22 24
8 9
32 34
2
A1(+)
11
21
31
A2
11
10
Table 1
10

AC1 AC1 Ops.
67 296 1K7 7K1
mA 92 46 19 9.5
443 1K8 9K2 36K1
mA 54 27 12 6
0.1 0 250 500 750 VA 1000 1250
Insulation
Dielectric strength (1 minute): Open contacts Between adjacent poles Between contacts and coil Isolation resistance at 500 V Isolation, IEC 61810-5: 1,000 V 2.5 KV 2.5 KV 1 G 2.5 KV / 3
Table 2
10
Max. DC Load
DC1 Amps.
Specifications
0.1 50 100 Volts 150 200
Dimensions - mm
A2
10
Standard Types
11 1
2
A1
AC 50 Hz, (60 Hz): 24, 48, 115, (120), 230, (240) X = LED (standard) C3-T31X ........VAC RC suppressor C3-T31R ........VAC DC 24, 48, 110, 220 X = LED, no polarity (standard) Free-wheeling diode Polarity and free-wheeling diodes AC/DC bridge rectifier (24, 48 or 60 V)
35
58.5
35
IEC 61810 EN 60947 20 B1201

MRC
C3-G30
General purpose, DC applications Three pole, open contacts
10 A 250 V AC1 10 A 30 V DC1

Contacts
1.2 A 110 V DC1 0.4 A 220 V DC1

AgNi 10 A 30 A 250 V 2.5 KVA
2
A1(+)
A2
1
Gap 1.7 mm
11
10
Table 1
10
VAC 24 48 115 230
0.8 x Un 0.1 x Un 2.4 VA (AC)/1.6 W (DC)
65 286 1K7 6K8
mA 100 50 21 10
VDC 24 48 110 220
360 1K4 7K6 30K3
mA 66 34 15 7.5
0.1 0.5 1 1.5 KVA 2 2.5
Insulation
Table 2
10
Max. DC Load
DC1 L/R 40ms Amps.
Specifications
0.1 50 100 Volts 150 200
Dimensions - mm
A2
10
Standard Types
11 1
2
A1
35
58.5
35
IEC 61810 EN 60947

B1201
21
MRC
C3-M10
Power relay, DC Single pole, magnetic blow out
10 A 250 V AC1 3.6 A 110 V DC1

Contacts
10 A 220 V DC1 2 A 220 V DC1

AgNi 10 A 30 A 250 V 250 V 2.5 KVA
Magnet
(+) 9
2
A1(+)
A2
10
Gap > 3 mm (1.7+1.7)
Materials: Standard, code 0 Max. switching current Max. peak inrush current (20 ms) Max. switching voltage (pollution 3) Max. switching voltage (pollution 2) Max. AC load (Table 1) Max. DC load (Table 2)
Table 1
10
VAC 24 48 115 230
0.8 x Un 0.1 x Un 2.4 VA (AC)/1.3 W (DC)
AC1 AC1 COS 0.4 AC15 Ops.
65 286 1K7 6K8
mA 100 50 21 10
VDC 24 48 110 220
443 1K7 9K2 36K1
mA 54 27 12 6
0.1 0.5 KVA 1 1.5
Insulation
Dielectric strength (1 minute): Open contacts Between contacts and coil Isolation resistance at 500 V Isolation, IEC 61810-5: 2.5 KV 2.5 KV 1 G 2.5 KV / 3
Table 2
10
DC Voltage Endurance
DC1 110V DC1 220V Ops.
Specifications
Nominal coil power 2.4 VA (AC), 1.3 W (DC) Operate time 20 ms Release time 10 ms Isolation: EN60947 pollution 3, Gr C 250 V Dielectric strength, contacts/coils 2.5 KV
0.1 2 4 6 Amp 8 10
Dimensions - mm
A2
10
Standard Types (50/60 Hz and DC)

11 1
2
A1
AC 24, 48, 115, (120), 230 X = LED (stardard) RC suppressor DC 24, 48, 110, 220 X = LED, no polarity (stardard) Free-wheeling diode Polarity and free-wheeling diodes AC/DC bridge rectifier (24, 48 or 60 V)
C3-M10X .......VAC C3-M10R .......VAC
35
58.5
35
C3-M10X ...... VDC C3-M10DX .... VDC C3-M10FX .... VDC C3-X10BX .... VDC
IEC 61810 EN 60947 22 B1201

MRC
C3-X10
Power relay for DC applications Single pole, N.O., double make
10 A 250 V AC1 10 A 30 V DC1

Contacts
7 A 110 V DC1 1.2 A 220 V DC1

AgNi 10 A 30 A 250 V 2.5 KVA
Magnet
(+) 9
2
A1(+)
A2
10
Gap > 3 mm (1.7+1.7)
Table 1
10
VAC 24 48 115 230
0.8 x Un 0.1 x Un 2.4 VA (AC)/1.3 W (DC)
65 286 1K7 6K8
mA 100 50 21 10
VDC 24 48 110 220
443 1K7 9K2 36K1
mA 54 27 12 6
0.1 0.5 1 1.5 KVA 2 2.5
Insulation
Dielectric strength (1 minute): Open contacts Between contacts and coil Isolation resistance at 500 V Isolation, IEC 61810-5: 2.5 KV 2.5 KV 1 G 2.5 KV / 3
Table 2
10
Max. DC Load
DC1 L/R 40ms
Specifications
Operate time + bounce time 20 ms Release time + bounce time 10 ms Ambient temperature -40C (no ice) to +70C Mechanical life ops. 10 Mill. AC, 20 Mill. DC relays Electrical life at nominal load 100,000 ops. Operating frequency at nominal load 1,200/hour Protection degree IP40 / RT1 Weight avg. 90 g
Amps.
0.1 50 100 Volts 150 200
Dimensions - mm
A2
10
Standard Types
11 1
2
A1
AC 50 Hz, (60 Hz): 24, 48, 115, (120), 230, (240) X = LED (standard) C3-X10X ........VAC RC suppressor C3-X10R ........VAC DC 24, 48, 110, 220 X = LED, no polarity (stardard) Free-wheeling diode Polarity and free-wheeling diodes AC/DC bridge rectifier (24, 48 or 60 V)
35
58.5
35
C3-X10X ....... VDC C3-X10DX .... VDC C3-X10FX ..... VDC C3-X10BX .... VDC
IEC 61810 EN 60947

B1201
23
MRC
2-Pole, Latching 11-Pin Plug-In Relay
C3-R20
Magnetic latching Two change-over contacts
10 A 250 V AC1 10 A 30 V DC1

Contacts
Materials:
0.5 A 110 V DC1 0.2 A 220 V DC1

4 3
12 14
8 9
22 24
2 6
A1 A3 ON (+) OFF (+) A2 (-)
11
21
11
10
Table 1
10
Coils
ON pulse power OFF pulse power One winding for AC. Two winding for DC
VAC ON mA OFF mA VDC
1.5 VA / W 0.5 VA / W
ON mA OFF mA
24
1
75 38 16 8
12 6 2.5 1.3
12 24 48 110
125 63 31 14
41 21 10 4.5
48 115 230
0.1 0.5 1 1.5 KVA 2 2.5
Insulation
Table 2
10
Max. DC Load

Amps. 1
Specifications
Minimum pulse length for ON / OFF 50 ms Ambient temperature -40C (no ice) to +70C Mechanical life ops. 10 Mill. AC, 20 Mill. DC relays Electrical life at nominal load 100,000 ops. Operating frequency at nominal load 1,200/hour Protection degree IP 40/RT1 Weight avg. 95 g
0.1 50 100 Volts 150 200
Dimensions - mm
A2
10
Standard Types
11 1
2
AC 50 Hz, (60 Hz): 24, 48, 115, (120), 230, (240) C3-R20 ..........VAC
A1
35
DC 12, 24, 48, 110 C3-R20 ......... VDC
58.5
35
IEC 61810 EN 60947 24 B1201

MRC
C3-E24
Sensible, 500 mW Two change-over contacts, 6 A Operating range: 0.8-1.7 x Un 6A 250 V AC1 6A 30 V DC1
Contacts
Materials:
4 3
12 14
8 9
22 24
2
A1(+)
11
21
A2
Standard, code 4 Optional, code 8 Max. switching current Max. peak inrush current (20 ms) Max. switching voltage Max. AC load (Table 1) Max. DC load (Table 2)
AgNi + 0.2 Au AgNi + 10 Au 6A 15 A 250 V 1.5 KVA
11
10
Table 1
10
VDC 24 48 60 110
0.8 x Un 0.1 x Un 500 mW
AC1 Ops.
1K1 4K6 7K2 24K2
mA 21 10 8.3 4.5
0.1 0.5 KVA 1 1.5
Insulation
Table 2
10
Max. DC Load
DC1 Amps.
Specifications
0.1 50 100 Volts 150 200
Dimensions - mm
A2
10
Standard Types
DC 12, 24, 48, 60, 110
11 1
2
C3-E24 ......... VDC

A1
Free-wheeling diode Polarity and free-wheeling diodes Connecting diodes to the coil will increase the release time. LED available upon request.
C3-E24D ....... VDC C3-E24F ....... VDC
35
58.5
35
IEC 61810 EN 60947

B1201
25
MRC
C3-N34
Sensitive, 800 mW Three change-over contacts, 6 A Operating range: 0.8-1.4 x UN 6A 250 V AC1 6A 30 V DC1
Contacts
4 3
12 14
5 7
22 24
8 9
32 34
2
A1(+)
11
21
31
A2
Materials: Standard, code 4 Optional, code 8 Max. switching current Max. peak inrush current (20 ms) Max. switching voltage Max. AC load (Table 1) Max. DC load (Table 2)
AgNi + 0,2 Au AgNi + 10 Au 6A 15 A 250 V 1.5 KVA
11
10
Table 1
10
VDC 24 48 60 110
0.8 x Un 0.1 x Un 800 mW
AC1 Ops.
720 2K8 4K5 15K
mA 33 17 13 7
0.1 0.5 KVA 1 1.5
Insulation
Dielectric strength (1 minute): Open contacts Between adjacent poles Between contacts and coil Isolation resistance at 500 V Isolation, IEC 61810-5: 1,000 V 2.5 KV 2.5 K 3 G 2.5 KV / 3
Table 2
10
Max. DC Load
DC1 Amps.
Specifications
0.1 50 100 Volts 150 200
Dimensions - mm
A2
10
Standard Types
DC 24, 48, 60, 110
11 1
2
C3-N34 ..........VAC
A1
Free-wheeling diode Polarity and free-wheeling diodes Connecting diodes to the coil will increase the release time. LED available upon request.
C3-N34D....... VDC C3-N34F ....... VDC
35
58.5
35
IEC 61810 EN 60947 26 B1201

MRC
3-Pole Relay, 11-Pin Plug-In Railway Relay
R3-N30D
Railway Application Relay According to EN 60077-1-2/99 EN 61373/99 6A 250 V AC1 6A 30 V DC1
Contacts
Materials:
4 3
12 14
5 7
22 24
8 9
32 34
2
A1(+)
11
21
31
A2
11
10
AgNi AgNi + 0.2 Au AgNi + 10 Au 6A 15 A 250 V
Table 1
10
Coils
Operation Range Power Consumption Generated transients 0.7 Un @ 1.25 Un 1.07 W V, include FWD mA 46 22 15 9
AC1 AC1 Cos 0.4 AC15 Ops.
Voltage 24 48 72 110
10%
525 2133 4844 12900
0.1 250
1000
1500 VA
2000
2500
Isolation
Polution grade PD3 With voltage (1.2/50s) / Dielectric strength (1 minute): Contact coil 4 KV/2220 V Between different poles 4 KV/2220 V Between contacts on same pole 1550 KV/850 V
Table 2
10

DC1 L/R 40ms
Specifications
Amps. 1
0.1 25 100 Volts 175 22
Dimensions - mm
A2
10
Max working temperature Number of mechanical operations Thermic Class Vibration: Category/Class Vibration Shock Operation (UN)/release time Weight avg. Weight avg. Relay + Socket Relay Protection
40C >10 million B (130C) 1/B Body Mounted 5-150 Hz (3 axes) 5 g (3 axes) 18 ms/35 ms 95 g 150 g IP 40
11
1
2
A1
Standard Types
DC 24, 48, 72, 110 X = LED Free-wheeling diode LED and free-wheeling diode R3-N30 ......... VDC R3-N30X ....... VDC R3-N30D....... VDC R3-N30DX .... VDC
35
58.5
35
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
B1201
27
MRC
4-Pole, Square Base, Plug-In Relay
C4-A40
General purpose Four change-over contacts
S4-B, S4-L, S4-P, S4-PO
10 A 250 V AC1 6 A 30 V DC1

Contacts
Materials:
0.5 A 110 V DC1 0.2 A 220 V DC1

1 2
4 5
7 8 10 11
13
A1(+)
12 14 22 24 32 34 42 44
11
21
31
41
A2
12
14
Table 1
10
VAC 24 48 115 230
0.8 x Un 0.1 x Un 2.4 VA (AC)/1.4 W (DC)
65 286 1K7 6K8
mA 100 50 21 10
VDC 24 48 110 220
414 1K6 8K1 35K7
mA 58 30 13 6.2
0.1 0.5 1 1.5 KVA 2 2.5
Insulation
Table 2
10
Max. DC Load

Amps. 1
Specifications
0.1 50 100 Volts 150 200
Dimensions - mm
1 2 4 5 6 3 13 7
Standard Types
35
4 10 7 10 11 8 11 9 9
12 14
AC 50 Hz, (60 Hz): 24, 48, 115, (120), 230, (240) X = LED (standard) C4-A40X ........VAC RC suppressor C4-A40R........VAC DC 24, 48, 110, 220 X = LED no polarity (standard) Free-wheeling diode Polarity and free-wheeling diodes AC/DC bridge rectifier (24, 48 or 60 V)
35
35
3
FASTON .110
Lloyds IEC 61810 EN 60947

28
B1201
MRC
C4-X20
Power relay, DC applications Two pole, N.O., double make
S4-B, S4-L, S4-P, S4-PO
10 A 250 V AC1 10 A 30 V DC1
7 A @ 110 V DC1 1.2 A @ 220 V DC1

AgNi 10 A 30 A 250 V 0.5 KVA
11
13
A1 (+)
Contacts Materials: Standard, code 0 Max. switching current Max. peak inrush current (20 ms) Max. switching voltage Max. AC load (Table 1) Max. DC load (Table 2)
A2
Gap > 3 mm (1.7+1.7)
14
Table 1
10
Coils (Ohms 10% @ 20) Pull-in voltage Drop-out voltage Nominal coil power
VAC 24 48 115 230
65 286 1K7 6K8
mA 100 50 21 10
443 1K8 9K2 36K1
mA 54 27 12 6
0.1 0.5 1 1.5 KVA 2 2.5
Insulation
Table 2
10
Max. DC Load
DC1 L/R 40ms
Specifications
Amps.
0.1 50 100 Volts 150 200
Dimensions - mm
1 2 4 5 6 3 13 7
Standard Types
35
4 10 7 10 11 8 11 9 9
12 14
AC 50 Hz, (60 Hz): 24, 48, 115, (120), 230, (240) X = LED (standard) C4-X20X ........VAC RC suppressor C4-X20R ........VAC DC 24, 48, 110, 220 X = LED no polarity (standard) Free-wheeling diode Polarity and free-wheeling diodes AC/DC bridge rectifier (24, 48 or 60 V))
35
35
3
FASTON .110
IEC 61810 EN 60947

Fax: (763) 553-0708 TURCK Inc. Minneapolis, MN 55441
www.turck.us
1-800-544-7769
B1201
29
MRC
C4-R30
Magnetic latching relay Three change-over contacts, 10 A
S4-B, S4-L, S4-P, S4-PO
10 A 250 V AC1 10 A 10 V DC1

Contacts
Materials:
0.5 A 110 V DC1 0.2 A 220 V DC1

AgNi AgNi + 10Au AgNi + 0.2 Au 10 A 30 A 250 V 2.5 KVA
1 2
4 5
7 8
13 12
A1 A3 ON (+) OFF (+) A2 (-)
12 14 22 24 32 34
11
21
31
14
Table 1
10
Coils
ON pulse power OFF pulse power One winding for AC, Two windings for DC
1.5 VA / W 0.5 VA / W
ON mA OFF mA
24 48 115 230
75 38 16 8
12 6 2.5 1.3
12 24 48 110
125 63 31 14
41 21 10 4.5
0.1 0.5 1 1.5 KVA 2 2.5
Insulation
Table 2
10
Max. DC Load
1,000 V 2.5 KV 2.5 KV 1 G 2.5 KV / 3

Amps.
Specifications
1
0.1 50 100 Volts 150 200
Minimun, pulse length for ON / OFF 50 ms Ambient temperature -40C (no ice) to +70C Mechanical life ops. 10 Mill. AC, 20 Mill. DC relays Electrical life at nominal load 100,000 ops. Operating frequency at nominal load 1,200/hour Protection degree IP 40/RT1 Weight avg. 95 g
Dimensions - mm
Standard Types
1 2 4 5 7 8 10 11
35
6 3 13
9 12 14
AC 50 Hz, (60 Hz): 24, 48, 115, (120), 230, (240) C4-R30 ..........VAC
52.5
DC 12, 24, 48, 110 C4-R30 ......... VDC
35 8
3 FASTON .110
3.85 6.5 7.0 6.75
1.5
1.2
C.I.
6.75 4.15
IEC 61810
30
B1201
MRC
C5-A20
General purpose Two change-over contacts
S5-S, S5-L, S5-P, S5-PO
16 A 400 V AC1 16 A 30 V DC1

Contacts
Materials:
0.5 A 110 V DC1 0.2 A 220 V DC1

AgNi AgNi + 10Au AgNi + 0.2 Au 16 A 40 A 400 V 4 KVA
1 4
12 14
3 6
22 24
A
A1(+)
11
21
A2
Table 1
10
AC1 Cos 0.4 Ops.
VAC
0.8 x Un 0.1 x Un 2.4 VA (AC)/1.4 W (DC)
65 286 1K7 6K8 18K8
mA 100 50 21 10 6
VDC 24 48 110 220
414 1K6 8K1 35K6
mA 58 30 13 6
24 48 115 230
0.1 0.66 1.33 2 KVA 2.6 3.3 4
400
Table 2
16 10
Max. DC Load
Insulation
Dielectric strength (1 minute): Open contacts Between adjacent poles Between contacts and coil Isolation resistance at 500 V Isolation, IEC 61810-5: 1,000 V 4 KV 4 KV 3 G 4 KV/3
DC1 L/R 40ms Amps. 1
Specifications
0.1 50 100 Volts 150 200
Dimensions - mm
1 2 5 8 3 6 9
Standard Types
AC 50 Hz, (60 Hz): 24, 48, 115, (120), 230, (240), 400 X = LED (standard) C5-A20X ........VAC RC suppressor C5-A20R........VAC DC 24, 48, 110, 220 X = LED, no polarity (standard) Free-wheeling diode Polarity and free-wheeling diodes AC/DC bridge rectifier (24, 48 or 60 V)
56
35
4 7
35 11.05 11.05 4.75 4.6 5.5 8.3 7.7 1.3 C.I. 8.9 1.5
FASTON .187
IEC 61810 EN 60947

www.turck.us
1-800-544-7769
B1201
31
MRC
3-Pole, Square Base, Power Relay
C5-A30
General purpose Three change-over contacts
S5-S, S5-L, S5-P, S5-PO
16 A 400 V AC1 16 A 30 V DC1

Contacts
0.5 A 110 V DC1 0.2 A 220 V DC1

AgNi 16 A 40 A 400 V 4 KVA
1 4
12 14
2 5
22 24
3 6
32 34
A
A1(+)
11
21
31
A2
Table 1
10
Res Cos 0.4 Ops.
VAC
65 286 1K7 6K8 18K8
mA 100 50 21 10 6
414 1K6 8K1 35K6
mA 58 30 13 6.5
0.1 0.66 1.33 2 KVA 2.6 3.3 4
24 48 115 230 400
Insulation
Table 2
16 10
Max. DC Load
1,000 V 4 KV 4 KV 3G 4 KV/3
Specifications
0.1 50 100 Volts 150 200
Dimensions - mm
1 2 5 8 3 6 9
Standard Types
AC 50 Hz, (60 Hz): 24, 48, 115, (120), 230, (240) X = LED (standard) C5-A30X ........VAC RC suppressor C5-A30R........VAC DC 24, 48, 110, 220 X = LED, no polarity (standard) Free-wheeling diode Polarity and free-wheeling diodes AC/DC bridge rectifier (24, 48 or 60 V)
56
35
4 7
35 11.05 11.05 4.75 4.6 5.5 8.3 7.7 1.3 C.I. 8.9 1.5
FASTON .187
IEC 6094
www.turck.us 1-800-544-7769 Fax: (763) 553-0708
IEC 61810
32
B1201
MRC
C5-G30
General purpose, DC applications Three open contacts
S5-S, S5-L, S5-P, S5-PO
16 A 400 V AC1 16 A 30 V DC1

Contacts
1.2 A 110 V DC1 0.4 A 220 V DC1

AgNi 16 A 40 A 400 V 4 KVA
A
A1(+)
Gap 1.7 mm
A2
Table 1
10

Pull-in voltage Drop-out voltage Nominal coil power VAC
AC1 Cos 0.4 Ops.
0.8 x Un 0.1 x Un 2.4 VA (AC)/1.6 W (DC) VDC 12 24 48 110 220
65 286 1K7 6K8 18K8
mA 100 50 21 10 6
90 360 1K4 7K6 30K3
mA 133 66 34 15 7.5
0.1 0.66 1.33 2 KVA 2.6 3.3 4
24 48 115 230 400
Insulation
Table 2
16 10
Max. DC Load
2,000 V 4 KV 4 KV 3 G 4 KV/3
Specifications
0.1 50 100 Volts 150 200
Dimensions - mm
1 2 5 8 3 6 9
Standard Types
56
35
4 7
35 11.05 11.05 4.75 4.6 5.5 8.3 7.7 1.3 C.I. 8.9 1.5
FASTON .187
IEC 60947 IEC 61810

www.turck.us
1-800-544-7769
B1201
33
MRC
C5-X10
Power relay, DC applications Single pole, N.O., double make
S5-S, S5-L, S5-P, S5-PO
16 A 400 V AC1 16 A 30 V DC1

Contacts
7 A 110 V DC1 1.2 A 220 V DC1

AgNi 16 A 40 A 400 V 4 KVA
A
A1(+)
A2
Gap > 3 mm
Table 1
10
AC1 Cos 0.4 Ops.
VAC
65 286 1K7 6K8 18K8
mA 100 50 21 10 6
110 443 1K7 9K2 34K5
mA 108 54 27 12 6.5
0.1 0.66 1.33 2 KVA 2.6 3.3 4
24 48 115 230 400
Insulation
Table 2
16 10
Max. DC Load
DC1 L/R 40ms Amps.
Dielectric strength (1 minute): Between adjacent poles Between contacts and coil Isolation resistance at 500 V Isolation, IEC 61810-5:
4 KV 4 KV 3 G 4 KV/3
Specifications
0.1 50 100 Volts 150 200
Dimensions - mm
1 2 5 8 3 6 9
Standard Types
AC 50 Hz, (60 Hz): 24, 48, 115, (120), 230, (240) X = LED (standard) C5-X10X ........VAC RC suppressor C5-X10R ........VAC DC 24, 48, 110, 220 X = LED, no polarity (standard) Free-wheeling diode Polarity and free-wheeling diodes AC/DC bridge rectifier (24, 48 or 60 V)
56
35
4 7
35 11.05 11.05 4.75 4.6 5.5 8.3 7.7 1.3 C.I. 8.9 1.5
FASTON .187
IEC 61810
34
B1201
MRC
C5-M10
DC power relay One N.O. pole, magnetic blow out
S5-S, S5-L, S5-P, S5-PO
16 A 400 V AC1 3.6 A 110 V DC Ind

Contacts
10 A 220 V DC1 2 A 220 V DC Ind

AgNi 16 A 40 A 400 V 4 KVA
Magnet
(+) 6
A
A1(+)
Gap > 3 mm
A2
Table 1
10
AC1 Cos 0.4 Ops.
VAC
65 286 1K7 6K8 18K8
mA 100 50 21 10 6
110 443 1K7 9K2 34K5
mA 108 54 27 12 6.5
0.1 0.66 1.33 2 KVA 2.6 3.3 4
24 48 115 230 400
Insulation
Table 2
10
DC Voltage Endurance
DC1 110V DC1 220V Ops.
Dielectric strength (1 minute): Open contacts Between contacts and coil Isolation resistance at 500 V Isolation, EN 60947/IEC 61810-5:
4,000 V 4 KV 3 G 4 KV/3
Specifications
Operate time + bounce time 20 ms Release time + bounce time 10 ms Ambient temperature -40C (no ice) to +70C Mechanical life ops. 10 Mill. AC relays, 20 Mill. DC relays Electrical life at nominal load 100,000 ops. Operating frequency at nominal load 1,200/hour Protection degree IP 40/RT1 Weight avg. 90 g
0.1 2 4 6 Amp 8 10
Dimensions - mm
Standard Types (50 / 60 Hz and CC)
1 4 7 2 3 1 2 5 6 4 5 8 9 8
35
AC 24, 48, 115, (110 - 120), 230 X = LED (standard) RC suppressor DC 12, 24, 48, 110, 120/125,220 X = LED Free-wheeling diodes Polarity and free-wheeling diodes AC/DC bridge rectifier (24, 48 or 60 V)
C5-M10X .......VAC C5-M10R .......VAC
A
35
35
C5-M10X ...... VDC C5-M10DX .... VDC C5-M10FX .... VDC C5-M10BX .... VDC
4.75
FASTON .187
IEC 61810 EN 60947 B1201 35
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
MRC
C5-M20
Power relay, DC Double pole, N.O., magnetic blow out
S5-S, S5-L, S5-P, S5-PO
16 A 250 V AC1
7A 3A
110 V DC1 220 V DC1

AgNi 16 A 40 A 250 V 4 KVA
Contacts
4 6 A
A1(+)
Magnet
7 (+)
Gap 1.7 mm
9 (+)
A2
Table 1
10

Pull-in voltage Drop-out voltage Nominal coil power VAC 24 48 115 230 0.8 x Un 0.1 x Un 2.4 VA (CA) / 1.6 W (CC) mA 100 50 21 10.4 VDC 12 24 48 110
AC1 Cos 0.4 Amps.
65 286 1K7 6K8
90 373 1K4 7K6
mA 133 66 33 15
0.1 0.66 1.33 2 KVA 2.6 3.3 4
Insulation
Dielectric strength (1 minute): Open contacts Between adjacent poles Between contacts and coil Isolation resistance at 500 V Isolation, EN 60947/IEC 61810-5: 2 KV 4 KV 3 KV 3 G 4 KV/3
Table 2
10
Max. DC Load
DC1 L/R 40ms
Specifications
1
0.1 0 50 100 Amps. 150 200 250
Dimensions - mm
1 4 7 2 3 1 2 5 6 4 5 8 9 8
Amps.
Standard Types (50 / 60 Hz and CC)

AC 24, 48, 115, (120), 230 (240) X = LED (standard) RC suppressor DC 12, 24, 48, 110, 120/125, 220 X = LED Free-wheeling diodes Polarity and free-wheeling diodes AC/DC bridge rectifier (24, 48 or 60 V) C5-M20X .......VAC C5-M20R .......VAC
35
A
35
35
C5-M20X ...... VCC C5-M20DX .... VCC C5-M20FX .... VCC C5-M20BX .... VCC
4.75
FASTON .187
IEC 61810 EN 60947

36
B1201
MRC
2-Pole, Latching Relay
C5-R20
Magnetic latching relay Two Change-over contacts, 10 A
S5-S, S5-L, S5-P, S5-PO
10 A 400 V AC1 0.2 A 220 V DC1

Contacts
10 A 30 V DC1 0.5 A 110 V DC1

AgNi 10 A 30 A 400 V 4 KVA
1 4
12 14
3 6
22 24
A 8
A1 A3 ON (+) OFF (+) A2 (-)
11
21
Table 1
10
Coils (Ohms 10% @ 20C) ON pulse power OFF pulse power One winding for AC, two windings for DC
1.5 VA/W 0.5 VA/W
ON mA OFF mA
24
1
75 38 16 8
12 6 2.5 1.3
12 24 48 110
125 63 31 14
41 21 10 4.5
48 115 230
0.1 0.5 1 1.5 KVA 2 2.5
Insulation
Dielectric strength (1 minute): Open contacts Between adjacent poles Between contacts and coil Isolation resistance at 500 V Isolation, EN 60947/IEC 61810-5: 1,000 V 4 KV 4 KV 3 G 4 KV/3
Table 2
10
Max. DC Load

Amps.
Specifications
1
0.1 50 100 Volts 150 200
Minimun, pulse length for ON / OFF 50 ms Ambient temperature -40C (no ice) to +70C Mechanical life ops. 10 Mill. AC, 20 Mill. DC relays Electrical life at nominal load 100,000 ops. Operating frequency at nominal load 1,200/hour Protection degree IP 40/RT1 Weight avg. 95 g
Dimensions - mm
1 4 7 2 3 1 2 5 6 4 5 8 9 8
Standard Types
AC 50 Hz, (60 Hz): 24, 48, 115, (110-120), 230, (240) C5-R20 ..........VAC DC 12, 24, 48, 110 C5-R20 ......... VDC
35
A
35
35
4.75
FASTON .187
IEC 61810
www.turck.us
1-800-544-7769
B1201
37
QRC
1-Pole, Miniature Power Plug-In Relay
C7-A10
General purpose One change-over contact, 16 A
S7-16
16 A 250 V AC1 16 A 30 V DC1

Contacts
0.5 A 110 V DC1 0.2 A 220 V DC1

AgNi 16 A 40 A 250 V 4 KVA
1 4
7
A1 (+)
Materials: Standard, code 0 Max. switching current Max. peak inrush current (20 ms) Max. switching voltage Max. AC load (Table 1) Max. DC load (Table 2) Only plug-in S7-16 socket
A2
Table 1
10
VAC 24 48 115 230
0.8 x Un 0.1 x Un 1.2 VA (AC)/1.3 W (DC)
Res AC1 Cos 0.4 Ops.
174 686 4K3 18K6
mA 50 25 10.4 5.2
VDC 12 24 48 110
111 432 1K7 9K2
mA 108 55 28 12
0.1 0 250 500 750 VA 1000 1250
Insulation
Dielectric strength (1 minute): Open contacts Between contacts and coil Isolation resistance at 500 V Isolation, IEC 61810-5: 1,000 V 2.5 KV 1 G 2.5 KV/3
Table 2
16 10
Max. DC Load
Specifications
0.1 50 100 Volts 150 200
Dimensions - mm
1 3 5 2 4 6
Standard Types
AC 50 Hz, (60 Hz): 24, 48, 115, (120), 230, (240) X = LED (standard) C7-A10X ........VAC DC 12, 24, 48, 110, X = LED, no polarity (standard) Free-wheeling diode Polarity and free-wheeling diodes AC/DC bridge rectifier (24, 48 or 60 V)
7 A
8 B
21
4.75
FASTON .187
IEC 61810 EN 60947

38
B1201
QRC
C7-A20
General purpose Two pole, change-over contacts
S7-M, S7-L, S7-P, S7-PO, S7-PI
10 A 250 V AC1 10 A 30 V DC1

Contacts
Materials:
0.5 A 110 V DC1 0.2 A 220 V DC1

1 3
12 14
2 4
22 24
7
A1(+)
11
21
A2
Table 1
10
VAC 24 48 115 230
0.8 x Un 0.1 x Un 1.2 VA (AC)/1 W (DC)
AC1 Cos 0.4 Ops.
174 686 4K3 18K6
mA 50 25 10.4 5.2
VDC 12 24 48 110
148 594 2k3 11K4
mA 85 43 21 11
0.1 0.5 1 1.5 KVA 2 2.5
Insulation
Table 2
10
Max. DC Load

Amps. 1
Specifications
0.1 50 100 Volts 150 200
Dimensions - mm
1 3 5 2 4 6
Standard Types
AC 50 Hz, (60 Hz): 24, 48, 72, 115, (120), 230, (240) X = LED (standard) C7-A20X ........VAC DC 12, 24, 48, 72, 110, X = LED, no polarity (standard) Free-wheeling diode Polarity and free-wheeling diodes AC/DC bridge rectifier (24, 48 or 60 V)
7 A
8 B
21
4.75
FASTON .187
Lloyds
IEC 61810 EN 60947 B1201 39
www.turck.us
1-800-544-7769
QRC
C7-A20E
General purpose Two pole
S7-M, S7-L, S7-P, S7-PO, S7-PI
10 A 250 V AC1 10 A 30 V DC1

Contacts
Materials:
0.5 A 110 V DC1 0.2 A 220 V DC1

1 3
12 14
2 4
22 24
7
A1(+)
11
21
A2
Table 1
10

Pull-in voltage Drop-out voltage Nominal coil power
0.8 x Un 0.1 x Un 1.2 VA (AC)/1 W (DC) VDC 12 24 48 110
AC1 Cos 0.4 Ops.
VAC 24 48 115 230
174 686 4K3 18K6
mA 50 25 10.4 5.2
148 594 2K3 11K4
mA 85 43 21 11
0.1 0.5 1 1.5 KVA 2 2.5
Insulation
Table 2
10
Max. DC Load

Amps. 1
Specifications
0.1 50 100 Volts 150 200
Dimensions - mm
Standard Types
AC 50 Hz, (60 Hz): 24, 48, 115, (120), 230, (240) C7-A20E ........VAC DC 12, 24, 48, 110
28
34.7
21 4.75
38
C7-A20E ....... VDC
FASTON .187

40
B1201
QRC
2-Pole, Twin Contact Miniature Power Plug-In Relay
C7-T21
Low level Two change-over bifurcated contacts
S7-M, S7-L, S7-P, S7-PO, S7-I/O
6 A 250 V Res 6 A 30 V DC1 Min. contacts load: 1 mA / 5 V DC1

Contacts
Materials: Standard, code 1 Optional, code 2 Max. switching current Max. peak inrush current (20 ms) Max. switching voltage Max. AC load (Table 1) Max. DC load (Table 2) AgNi + 0.3 Au AgNi + 10 Au 6A 15 A 250 V 1.2 KVA
1 3
12 14
2 4
22 24
7
A1(+)
11
21
A2
Table 1
10
VAC 24 48 115 230
AC1 AC1 Amps.
174 686 4K3 18K6
mA 50 25 10.4 5.2
148 594 2K3 11K4
mA 85 43 21 11
0.1 0 250 500 750 VA 1000 1250
Insulation
Table 2
10
Max. DC Load
DC1 Amps.
Specifications
0.1 50 100 Volts 150 200
Dimensions - mm
1 3 5 2 4 6
Standard Types
AC 50 Hz, (60 Hz): 24, 48, 115, (120), 230, (240) X = LED (standard) C7-T21X ........VAC DC 12, 24, 48, 110 X = LED, no polarity (standard) Free-wheeling diode Polarity and free-wheeling diodes AC/DC bridge rectifier (24, 48 or 60 V)
7 A
8 B
21
4.75
FASTON .187
IEC 61810 EN 60947

www.turck.us
1-800-544-7769
B1201
41
QRC
C7-G20
Power relay, DC application Two open contacts, Gap 1.5 mm
S7-M, S7-L, S7-P, S7-PO, S7-I/O
10 A 250 V AC1 10A 30 V DC1

Contacts
0.8 A 110 V DC1 0.4 A 220 V DC1

AgNi 10 A 30 A 250 V 2.5 KVA
7
A1(+)
A2
Gap 1.5 mm
Table 1
10

Res Cos 0.4 Ops.
153 611 3K6 14K6
mA 62 31 13 6.5
99 388 1K5 8K
mA 121 61 32 14
0.1 0.5 1 1.5 KVA 2 2.5
Insulation
Table 2
10
Max. DC Load
DC1 Res L/R 40ms DC13

Amps. 1
Specifications
0.1 50 100 Volts 150 200
Dimensions - mm
1 3 5 2 4 6
Standard Types
AC 50 Hz, (60 Hz): 24, 48, 115, (120), 230, (240) X = LED (standard) C7-G20X........VAC DC 12, 24, 48, 110 X = LED, no polarity (standard) Free-wheeling diode Polarity and free-wheeling diodes AC/DC bridge rectifier (24, 48 or 60 V)
7 A
8 B
21
4.75
FASTON .187
Lloyds
www.turck.us 1-800-544-7769 Fax: (763) 553-0708
IEC 61810 EN 60947

42
B1201
QRC
C7-X10
Power relay, DC application Single pole, NO, double make
S7-M, S7-L, S7-P, S7-PO, S7-I/O
10 A 250 V AC1 10 A 30V DC1

Contacts
6A 1A
110 V DC1 220 V DC1

AgNi 10 A 30 A 250 V 2.5 KVA
7
A1(+)
Gap 3 mm (1.5+1.5)
A2
Table 1
10
VAC 24 48 115 230
Res Cos 0.4 Ops.
153 611 3K6 14K6
mA 62 31 13 6.5
111 432 1K7 9K2
mA 108 55 27 12
0.1 0.5 1 1.5 KVA 2 2.5
Insulation
Dielectric strength (1 minute): Open contacts Between contacts and coil Isolation resistance at 500 V Isolation, IEC 61810-5: 2.5 KV 2.5 KV 1 G 2.5 KV/3
Table 2
10
Max. DC Load
Res DC1 L/R 40ms
Specifications
Amps.
0.1 50 100 Volts 150 200
Dimensions - mm
1 3 5 2 4 6
Standard Types
AC 50 Hz, (60 Hz): 24, 48, 115, (120), 230, (240) X = LED (standard) C7-X10X ........VAC DC 12, 24, 48, 110 X = LED, no polarity (standard) Free-wheeling diode Polarity and free-wheeling diodes AC/DC bridge rectifier (24, 48 or 60 V)
7 A
8 B
21
4.75
FASTON .187

www.turck.us
1-800-544-7769
B1201
43
QRC
C7-H23
Power contact 10 A and bifurcated contact for current level
S7-M, S7-L, S7-P, S7-PO, S7-I/O
10 A 250 V AC1 6 A 30 V DC1

Contacts
6 A 250 V AC1 10 A 30 V DC1
1 3
12 14
2 4
22 24
7
A1(+)
11
21
A2
Table 1
10
Power Contacts Standard material Max. switching current Max. peak inrush current (20 ms) Max. switching voltage Max. AC load (Table 1) Max. DC load (Table 2) Bifurcated Contacts Standard material Max. switching current Max. peak inrush current (20 ms) Max. switching voltage Minimum current Max. DC load (Table 2)
AgNi 10 A 30 A 250 V 2.5 KVA
AgNi + 0.3 Au 6A 15 A 250 V 1 mA 5 V
AC1 Cos 0.4 Ops.
VAC 24
0.8 x Un 0.1 x Un 1.2 VA (AC)/1 W (DC) mA 81 40 21 11
10%
174 686 4K3 18K6
mA 50 25 10.4 5.2
VDC 10% 12 24 48 110 148 594 2K3 11K4
0.1 0.5 1 1.5 KVA 2 2.5
48 115 230
Table 2
10
Max. DC Load
Insulation
AC1
Ops.
Dielectric strength (1 minute): Between adjacent poles Between contacts and coil Isolation, IEC 61810-5:
2.5 KV 2.5 KV 2.5 KV/3
Specifications
0.1 250 500 VA 750 1,000
Max. working temperature Mechanical life ops. Protection degree Weight avg.
60C 10 million IP 40 43 g
Dimensions - mm
1 3 5 2 4 6
Standard Types
AC 24, 115, 230 X = LED DC 12, 24, 48, 110
7 A 8 B
C7-H23 ..........VAC C7-H23X ........VAC
21
X = LED Free-wheeling diode Polarity and free-wheeling diodes AC/DC bridge rectifier (24, 48 or 60 V)
C7-H23 ......... VDC C7-H23X ....... VDC C7-H23DX .... VDC C7-H23FX..... VDC C7-H23BX .... VDC
4.75
FASTON .187
IEC 61810
www.turck.us 1-800-544-7769 Fax: (763) 553-0708
EN 60947
44
B1201
QRC
C7-W10
High inrush current Single pole, wolfram and silver contacts
S7-M, S7-L, S7-P, S7-PO, S7-I/O
10 A 250 V AC
250 V AC5a/b
Contacts
4 7
A1(+)
Materials: Standard, code 0 Max. switching current Max. peak inrush cutrrent (2.5 ms) Max. switching voltage Max. AC load (Table 1) Max. DC load (Table 2)
AgNi 10 A 500 A 250 V 2.5 KVA
A2
Table 1
10
Electrical Life, ops. x
106
Res Cos 0.4 Ops.
153 611 3K6 14K6
mA 62 31 13 4.5
99 388 1K5 8K
mA 121 61 32 14
0.1 0.5 1 1.5 KVA 2 2.5
Insulation
Dielectric strength (1 minute): Open contacts Between contacts and coil Isolation resistance at 500 V Isolation, IEC 61810-5: 1,000 V 2.5 KV 1 G 2.5 KV
t
10
Max. DC Load
AC5 a/b Ops.
Specifications
0.1 250 500 VA 750 1000
Dimensions - mm
1 3 5 2 4 6
Standard Types
AC 50 Hz, (60 Hz): 24, 48, 115, (120), 230, (240) X = LED (standard) C7-W10X .......VAC DC 12, 24, 48, 110 X = LED, no polarity (standard) Free-wheeling diode Polarity and free-wheeling diodes AC/DC bridge rectifier (24, 48 or 60 V)
7 A
8 B
C7-W10X ...... VDC C7-W10DX ... VDC C7-W10FX .... VDC C7-W10BX ... VDC
21
4.75
FASTON .187

www.turck.us
1-800-544-7769
B1201
45
QRC
2-Pole, Miniature Plug-In Railway Relay
R7-A20D
Railway Application Relay
According to EN 60077-1-2/99 - EN 61373/99
S7-M, S7-L, S7-P, S7-PO, S7-I/O
10 A 250 V AC1
10 A 30 V
DC1
Contacts
Materials: Standard, code 0 Optional, code 4 Optional, code 8 Max. switching current Max. peak inrush current (20 ms) Max. switching voltage Max. AC load (Table 1) Max. DC load (Table 2) AgNi AgNi + 0.2 Au AgNi + 10 Au 10 A 30 A 250 V
1 3
12 14
2 4
22 24
7
A1(+)
11
21
A2
Table 1
10
Coils
Operation Range Power Consumption Power Consumption Generated transients Voltage 0.7 Un @ 1.25 Un >0.1 Un 1.07 W OV, include FWD mA 45 24 15 10
AC1 AC1 Cos Phi 0.4 AC15 Ops.
10%
535 2004 4750 11337
24 48 72 110
0.1 250 1000 VA 1500 2000 2500
Isolation
Table 2
10
Max DC Load
DC1 L/R 40ms
Polution grade PD3 With voltage (1.2/50s) / Dielectric strength (1 minute) Contact coil 4 KV/2,220 V Between different poles 4 KV/2,220 V Between contacts on the same pole 1,550 V
Amps.
Specifications
1
0.1 25 100 Volts 175 225
Dimensions - mm
1 3 5 2 4 6
Ambient temperature Number of mechanical operations Thermic Class Vibration: Category/Class Vibration Shock Operation (UN)/release time Weight avg. Weight avg. Relay + Socket Relay Protection
-25C to +70C 20 million B (130C) 1/B Body Mounted 5-150 Hz (3 axes) 5 g (3 axes) 10 ms/15 ms 35 g 75 g IP 40
Standard Types
DC 24, 48, 72, 110 Free-wheeling diode R7-A20D....... VDC
7 A
8 B
21
4.75
FASTON .187
46
B1201
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
QRC
2-Pole, Miniature Plug-In Railway Relay
R7-T21D
Railway Application Relay
According to EN 60077-1-2/99 - EN 61373/99
S7-M, S7-L, S7-P, S7-PO, S7-I/O
6A
250 V AC1
6A
30 V
DC1
Contacts
Materials:
1 3
12 14
2 4
22 24
7
A1(+)
11
21
A2
Standard, code 1 Optional, code 2 Max. switching current Max. peak inrush current (20 ms) Max. switching voltage Max. AC load (Table 1) Max. DC load
AgNi + 0.2 Au AgNi + 10 Au 6A 15 A 250 V 100,000 ops.
Table 1
10
Coils
Operation Range Power Consumption Power Consumption Generated transients Voltage 0.7 Un @ 1.25 Un >0.1 Un 1.07 W OV, include FWD mA 45 24 15 10
AC1 AC1 Cos 0.4 AC15 Ops.
10%
535 2004 4750 11337
24 48 72 110
0.1 250 1000 VA 1500 2000 2500
Isolation
Table 2
10
Max DC Load
DC1 L/R 40ms
Polution grade PD3 With voltage (1.2 / 50s)/Dielectric strength (1 minute) Contact coil 4 KV/2,220 V Between different poles 4 KV/2,220 V Between contacts on the same pole 1,550 V
Amps.
Specifications
1
0.1 25 100 Volts 175 225
Dimensions - mm
1 3 5 2 4 6
Ambient temperature Number of mechanical operations Thermic Class Vibration: Category/Class Vibration Shock Operation (UN)/release time Weight avg. Weight avg. Relay + Socket Relay Protection
-25C to +70C 20 million B (130C) 1/B Body Mounted 5-150 Hz (3 axes) 5 g (3 axes) 10 ms/15 ms 35 g 75 g IP 40
Standard Types
DC 24, 48, 72, 110 Free-wheeling diode R7-T21D ....... VDC
7 A
8 B
21
4.75
FASTON .187
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
B1201
47
QRC
Miniature 4-Pole Plug-In Relay
C9-A41
General purpose Four pole, change-over contacts
S9-M, S9-L, S9-P, S9-PO
5A 5A
250 V AC1 30 V DC1
0.2 A 110 V DC1

AgNi + 0.2Au AgNi + 10Au 5A 15 A 250 V 1250 KVA
Contacts
Materials: Standard, code 1 Optional, code 2 Max. switching current Max. peak inrush current (2.5 ms) Max. switching voltage Max. AC load (Table 1) Max. DC load (Table 2)
1 5
2 6
3 7
4 8
13
A1(+)
12 14 22 24 32 34 42 44
11
21
31
41
A2
10
11
12
14
Table 1
10

Res Ops.
174 686 4K3 18K6
mA 50 25 10.4 5.2
148 594 2K3 11K4
mA 85 43 21 11
0.1 0 400 VA 800 1200
Insulation
Dielectric strength (1 minute): Open contacts Between adjacent poles Between contacts and coil Isolation resistance at 500 V Isolation, IEC 61810-5: 1,000 V 2 KV 2.5 KV 1 G 2.5 KV
Table 2
10
Max. DC Load
Res Amps.
Specifications
0.1 50 75 125 Volts 175 200
Dimensions - mm
Standard Types
28 28
1 3 24 5678 910 11 12
1 5 9 2 3 4 6 10 7 11 8 12
AC 50 Hz, (60 Hz): 24, 48, 72, 115, (120), 230, (240) X = LED (standard) C9-A41X ........VAC DC 12, 24, 48, 72, 110 X = LED, no polarity (standard) Free-wheeling diode Polarity and free-wheeling diodes AC/DC bridge rectifier (24, 48 or 60 V)
37.5
13
13
14
14
21 21
2.6
FASTON .102
IEC 61810 EN 60947

48
B1201
QRC
Miniature 2-Pole Relay
C9-R21
Magnetic latching relay Two change-over contacts, 5 A
S9-M, S9-L, S9-P, S9-PO
5A 5A
120 V AC1 30 V DC1

AgNi + 0.2Au 5A 15 A 250 V 1,200 KVA
Contacts
1 5
12 14
4 8
22 24
13 10
A1 A3 ON (+) OFF (+) A2 (-)
11
21
12
14
Table 1
10
Coils
ON pulse power OFF pulse power One winding for AC. Two windings for DC.
1.2 VA/W 0.3 VA/W
Res Ops.
ON mA OFF mA
24
1
50 25 10 5
8 4 2 1
12 24 48 60
100 50 25 20
25 12 6 5
48 115 230
0.1 0 400 VA 800 1200
Insulation
Dielectric strength (1 minute): Open contacts Between adjacent poles Between contacts and coil Isolation resistance at 500 V Isolation, IEC 61810-5: 1,000 V 2 KV 2 KV 1 G 2.5 KV/2
Table 2
10
Max. DC Load
Res Amps.
Specifications
Minimum, pulse length for ON/OFF 50 ms Ambient temperature -40C (no ice) to +70C Mechanical life ops. 10 Mill. AC, 20 Mill. DC relays Electrical life at nominal load 100,000 ops. Operating frequency at nominal load 1,200/hour Protection degree IP 40/RT1 Weight avg. 43 g
0.1 50 75 125 Volts 175 200
Dimensions - mm
Standard Types
28 28
1 3 24 5678 910 11 12
1 5 9 2 3 4 6 10 7 11 8 12
AC 50 Hz, (60 Hz): 24, 48, 115, (120), 230, (240) C9-R21 ..........VAC DC 12, 24, 48, 60 C9-R21 ......... VDC
37.5
13
13
14
14
21 21
2.6
FASTON .102

www.turck.us
1-800-544-7769
B1201
49
QRC
Miniature 2-Pole Relay
C9-E21
S9-M, S9-L, S9-P, S9-PO
General purpose. Sensitive 500 mW Two pole, change-over contacts DC operating range: 0.8-1.7 x Un 5A 250 V AC1 5A 30 V DC1
Contacts
Materials:
1 5
12 14
4 8
22 24
13
A1(+)
11
21
A2
Standard, code 1 Optional, code 2 Max. switching current Max. peak inrush current (2.5 ms) Max. switching voltage Max. AC load (Table 1) Max. DC load (Table 2)
AgNi + 0,2Au AgNi + 10Au 5A 15 A 250 V 1,200 VA
12
14
Table 1
10
VAC 24 48 115 230
Res Ops.
238 1K 5K9 23K9
mA 33 17 7 3.5
288 1K1 4K6 24K2
mA 42 21 10 4.5
0.1 0 400 VA 800 1200
Insulation
Table 2
10
Max. DC Load
Res Amps.
Specifications
0.1 50 75 125 Volts 175 200
Dimensions - mm
Standard Types
28 28
1 3 24 5678 910 11 12
1 5 9 2 3 4 6 10 7 11 8 12
AC 50 Hz, (60 Hz): 24, 48, 115, (120), 230, (240) X = LED (standard) C9-E21X ........VAC DC 12, 24, 48, 110 X = LED, no polarity (standard) Free-wheeling diode Polarity and free-wheeling diodes AC/DC bridge rectifier (24, 48 or 60 V)
13
13
14
14
21 21
2.6
C9-E21X ....... VDC C9-E21DX .... VDC C9-E21FX ..... VDC C9-E21BX .... VDC
37.5
FASTON .102

50
B1201
IRC
Interface and General Applications
C10-A10
One pole, change-over contact
S10, S10-M, S10-P, S10-K
10 A 250 V AC1 10 A 30 V DC1 13 A 250 V AC1

Contacts
Materials:
0.5 A 110 V DC1 0.2 A 220 V DC1
Gap 0.5 mm.
AgNi AgNi + 10 Au AgSnO2 10 A 30 A 250 V 2.5 KVA
Table 1
10
AC1 Cos 0.4 Ops.
VAC
0.8 x Un 0.1 x Un 1.1 VA (AC)/0.7 W (DC)
290 1,200 7,300 28,800
mA 45 23 9.5 4.7
VDC 12 24 48 110
224 742 3,500 19,900
mA 53 32 13.7 5.5
24 48 115 230
0.1 500 1000 VA 1500 2500
Insulation
Table 2
10
Max. DC Load
Dielectric strength (1 minute): Open contacts Between contact and coil Isolation resistance at 500 V Isolation, IEC 61810-5:
1,000 V 5 KV 1 G 4 KV/3
DC1 L/R 40ms Amps.
Specifications
1
0.1 50 100 Volts 150 200
Operate time + bounce time 10 ms Release time + bounce time 5 ms Ambient temperature -40C (no ice) to +70C Mechanical life ops. 10 Mill. AC, 20 Mill. DC relays Electrical life at nominal load 100,000 ops. Operating frequency at nominal load 1,200/hour Protection grade IP 40/RT1 Weight avg. 21 g
Dimensions - mm
Standard Types
1 2
35.4
3 4 5
6 A1 A2
12.5
AC 50 Hz, (60 Hz): 24, 48, 115, (120), 230, (240) X = LED (standard) C10-A10X ......VAC RC suppressor C10-A10R......VAC DC 12, 24, 48, 110 X = LED, no polarity (standard) C10-A10X ..... VDC Options (DC coils) Polarity and free-wheeling diodes C10-A10FX... VDC AC/DC bridge rectifier (24 or 48 V) C10-A10BX .. VDC
20
4.75 FASTON .187
28.8
IEC 61810 EN 60947

www.turck.us
1-800-544-7769
B1201
51
IRC
C10-A10E
One pole, change-over contact
S10, S10-M, S10-P, S10-K
10 A 250 V AC1 10 A 30 V DC1 13 A 250 V AC1

Contacts
Materials:
0.5 A 110 V DC1 0.5 A 220 V DC1
Gap 0.5 mm.
AgNi AgNi + 10 Au 10 A 30 A 250 V 2.5 KVA
Table 1
10

AC1 Cos 0.4

Pull-in voltage Drop-out voltage Nominal coil power VAC
Ops.
290 1,200 7,300 28,800
mA 45 23 9.5 4.7
224 742 3,500 19,900
mA 53 32 13.7 5.5
24 48 115 230
0.1 500 1000 VA 1500 2000
Insulation
Table 2
10
Max. DC Load
1,000 V 5 KV 3 G 4 KV/3
DC1 L/R 40ms Amps.
Specifications
1
0.1 50 100 Volts 150 200
Dimensions - mm
Standard Types
AC 50 Hz, (60 Hz): 24, 48, 115, (120), 230, (240) C10-A10E ......VAC DC 12, 24, 48, 110 C10-A10E ..... VDC
IEC 61810 EN 60947 52 B1201

IRC
C10-G10
One pole, open contact
S10, S10-M, S10-P, S10-K
10 A 250 V AC1 10 A 30 V DC1
0.8 A 110 V DC1 0.4 A 220 V DC1
Contacts
Materials: Standard, code 0 Optional, code 8 Optional, code 5 Max. switching current Max. peak inrush current (20 ms) Max. switching voltage Max. AC load (Table 1) Max. DC load (Table 2) AgNi AgNi + 10 Au AgSnO2 10 A 30 A 250 V 2.5 KVA
Gap 1 mm.
Table 1
10
AC1 Cos 0.4 Ops.
VAC
290 1,200 7,300 28,800
mA 45 23 9.5 4.7
224 742 3,500 19,900
mA 53 32 13.7 5.5
24 48 115 230
0.1 500 1000 VA 1500 2500
Insulation
Table 2
10
Max. DC Load
2000 V 5 KV 1 G 4 KV/3
DC1 110V DC1 220V Amps
Specifications
1
0.1 75 125 Volts 175 225
Dimensions - mm
Standard Types
AC 50 Hz, (60 Hz): 24, 48, 115, (120), 230, (240) X = LED (standard) C10-G10X......VAC RC suppressor C10-G10R .... VAC DC 12, 24, 48, 110 X = LED, no polarity (standard) Options (DC coils) Polarity and free-wheeling diodes AC/DC bridge rectifier (24 or 48 V)
C10-G10X..... VDC C10-G10FX .. VDC C10-G10BX .. VDC
IEC 61810 EN 60947

B1201
53
IRC
C10-T13
One change-over twin contact
S10, S10-M, S10-P, S10-K
6A 6A
250 V AC1 30 V DC1
0.5 A 110 V DC1 0.2 A 220 V DC1
Contacts
Materials: Standard, code 3 Optional, code 2 Max. switching current Max. peak inrush current (20 ms) Max. switching voltage Max. AC load (Table 1) Max. DC load (Table 2) AgNi + 3 Au AgNi + 10 Au 6A 15 A 250 V 1.5 KVA
Gap 0.5 mm.
Table 1
10
VAC 24 48 115 230
AC1
290 1,200 7,300 28,800
mA 45 23 9.5 4.7
224 742 3,500 19,900
mA 53 32 13.7 5.5
Ops.
0.1 500 VA 1000 1500
Insulation
Dielectric strength (1 minute): Open contacts Between contact and coil Isolation resistance at 500 V Isolation, IEC 61810-5: 1,000 V 5 KV 1 G 4 KV/3
Table 2
10
Max. DC Load
DC1
Amps
Specifications
1
0.1 75 125 Volts 175 225
Operate time + bounce time 10 ms Release time + bounce time 5 ms Ambient temperature -40C (no ice) to +70C Mechanical life ops. 10 Mill. AC relays, 20 Mill. DC relays Electrical life at nominal load 100,000 ops. Operating frequency at nominal load 1,200/hour Protection grade IP 40/RT1 Weight avg. 21 g
Dimensions - mm
1 2
Standard Types
28.8
AC 50 Hz, (60 Hz): 24, 48, 115, (120), 230, (240) X = LED (standard) C10-T13X ......VAC RC suppressor C10-T13R ......VAC DC 12, 24, 48, 110 X = LED, no polarity (standard) C10-T13X ..... VDC Options (DC coils) Polarity and free-wheeling diodes C10-T13FX ... VDC AC/DC bridge rectifier (24, 48 or 60 V) C10-T13BX... VDC
35.4
3 4 5
6 A1 A2
20
12.5
4.75 FASTON .187
IEC 61810 EN 60947

54
B1201
IRC
C10-GT13
One pole, twin open contact
S10, S10-M, S10-P, S10-K
6A 6A
250 V AC1 30 V DC1
0.8 A 110 V DC1 0.4 A 220 V DC1
Contacts
Materials: Standard, code 3 Optional, code 2 Max. switching current Max. peak inrush current (20 ms) Max. switching voltage Max. AC load (Table 1) Max. DC load (Table 2) AgNi + 3 Au AgNi + 10 Au 6A 15 A 250 V 1.5 KVA
Gap 1 mm.
Table 1
10

Pull-in voltage Drop-out voltage Nominal coil power
AC1
VAC
Ops.
1
290 1,200 7,300 28,800
mA 45 23 9.5 4.7
224 742 3,500 19,900
mA 53 32 13.7 5.5
24 48 115 230
0.1 500 VA 1000 1500
Insulation
Dielectric strength (1 minute): Open contacts Between contact and coil Isolation resistance at 500 V Isolation, IEC 61810-5: 2,000 V 5 KV 3 G 4 KV/3
Table 2
Max. DC Load
Specifications
Operate time + bounce time 10 ms Release time + bounce time 8 ms Ambient temperature -40C (no ice) to +70C Mechanical life ops. 10 Mill. AC relays, 20 Mill. DC relays Electrical life at nominal load 100,000 ops. Operating frequency at nominal load 1,200/hour Protection grade IP 40/RT1 Weight avg. 21 g
Dimensions - mm
Standard Types
AC 50 Hz, (60 Hz): 24, 48, 115, (120), 230, (240) X = LED (standard) C10-GT13X ...VAC RC suppressor C10-GT13R ...VAC DC 12, 24, 48, 110 X = LED, no polarity (standard) Options (DC coils) Polarity and free-wheeling diodes AC/DC bridge rectifier (24 or 48 V)
C10-GT13X .. VDC C10-GT13FX..VDC C10-GT13BX..VDC
IEC 61810 EN 60947

B1201
55
IRC
C12-A21
Two poles, change-over contacts
S12, S12-P
5A 5A
250 V AC1 30 V DC1
0.5 A 110 V DC1 0.2 A 220 V DC1
Contacts
Materials:
Gap 0.5 mm.
Table 1
VAC 24 48 115 230
Ops.
290 1,200 7,300 28,800
mA 45 23 9.5 4.7
224 742 3,500 19,900
mA 53 32 13.7 5.5
Insulation
Table 2
10
Max. DC Load
DC1
Dielectric strength (1 minute): Open contacts Between adjacents poles Between contact and coil Isolation resistance at 500 V Isolation, IEC 61810-5:
1,000 V 3,000 V 5 KV 3 G 4 KV/3
Amps
Specifications
Operate time + bounce time 10 ms Release time + bounce time 5 ms Ambient temperature -40C (no ice) to +70C Mechanical life ops. 10 Mill. AC relays, 20 Mill. DC relays tElectrical life at nominal load 100,000 ops. Operating frequency at nominal load 1,200/hour Protection degree IP 40/RT1 Weight avg. 21 g
0.1 50
50
150 Volts
200
Dimensions - mm
Standard Types
AC 50 Hz, (60 Hz): 24, 48, 115, (120), 230, (240) X = LED (standard) C12-A21X ......VAC RC suppressor C12-A21R......VAC DC 12, 24, 48, 110 X = LED, no polarity (standard) C12-A21X ..... VDC Options (DC coils) Polarity and free-wheeling diodes C12-A21FX... VDC AC/DC bridge rectifier (24, 48 or 60 V) C12-A21BX .. VDC
IEC 61810 EN 60947 56 B1201

IRC
C12-G21
Two poles, open contacts
S12, S12-P
5A 5A
250 V AC1 30 V DC1
0.8 A 110 V DC1 0.4 A 220 V DC1
Contacts
Materials:
Gap 1 mm
Table 1
VAC
290 1,200 7,300 28,800
mA 45 23 9.5 4.7
224 742 3,500 19,900
mA 53 32 13.7 5.5
Ops.
24 48 115 230
Insulation
Table 2
10
Max. DC Load
DC1
Dielectric strength (1 minute): Open contacts Between adjacents poles Between contact and coil Isolation resistance at 500 V Isolation, IEC 61810-5:
2,000 V 3,000 V 5 KV 3 G 4 KV/3
Amps
Specifications
0.1 50 100 Volts 150 200
Dimensions - mm
Standard Types
AC 50 Hz, (60 Hz): 24, 48, 115, (120), 230, (240) X = LED (standard) C12-G21X......VAC RC suppressor C12-G21R .....VAC DC 12, 24, 48, 110 X = LED, no polarity (standard) C12-G21X..... VDC Options (DC coils) Polarity and free-wheeling diodes C12-G21FX .. VDC AC/DC bridge rectifier (24, 48 or 60 V) C12-G21BX .. VDC
IEC 61810 EN 60947

B1201
57
IRC
CSS-DCP
Solid state relay
S10, S10-M, S10-P, S-10K
DC inductive or resistive load switching Positive common output One open contact 2 A @ 5-50 VDC
Input, Polarity Protected Range of input voltage Drop-out voltage Input current Current stabilizer Peak inrush voltage protection
5-32 VDC <2.5 VDC 3 1 mA Yes EC-1000-4-5 Level 1
CSS-DCP
+(-)A1
Positive Common
-1
Output, Positive Common Max. output current Max. output voltage Minimum output voltage Max. drop voltage Max. leakage current at 48 VDC Max. overcurrent pulse Pulse protection Max. current at inverse voltage 2A 50 VDC 5 VDC 1.3 VDC <100 A 5 A, 350 s IEC-1000-4-5 Level 1 1A
-(+)A2
+2 Common
Max. DC Load vs. Ambient Temperature

A
Specifications
Dielectric strengh input / output Operate time Release time, max. Working temperature, max. Storage temperature Weight avg. 4 KV/1 min. 1 ms 2 ms 60C 80C 28 g
CSS-DCP
2
Applications
-20 0 20 40 60 C
Tamb.
To switch up to 50 VDC, heating elements electrovalves, motors, input/output signals on PLCs, solenoids, incandescent and fluorescent lamps, etc. Inductive loads must be shunted with an antiparallel diode.
Dimensions - mm
+(-)A1 5 - 32 VDC -(+)A2 1 CSS DC-P 2 5 - 50 VDC
+(-)A1 5 - 32 VDC -(+)A2
1 CSS DC-P 2 5 - 50 VDC
58
B1201
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
IRC
CSS-DCN
Solid state relay
S10, S10-M, S10-P, S-10K
DC inductive or resistive load switching Negative common output One open contact 2 A @ 5-50 VDC
Input, Polarity Protected
Range of input voltage Drop-out voltage Input current Current stabilizer Peak inrush voltage protection 5-32 VDC <2.5 VDC 3 1 mA Yes EC-1000-4-5 Level 1
CSS-DCN
+(-)A1
Negative Common
Output, Positive Common
+1
Max. output curren Max. output voltage Minimum output voltage Max. drop voltage Max. leakage current at 48 VDC Max. overcurrent pulse Pulse protection Max. current at inverse voltage 2A 50 VDC 5 VDC 1.3 VDC <100 A 5 A, 350 s IEC-1000-4-5 Level 1 1A
-(+)A2
-2 Common

A CSS-DCN
2
Specifications
Dielectric strengh input / output Operate time Release time, max. Working temperature, max. Storage temperature Weigth avg. 4 KV/1 min 1 ms 2 ms 60C 80C 28 g
Applications
To switch, up to 50 VDC, heating elements electroalves, motors, input/output signals on PLCs, solenoids, incandescent and fluorescent lamps, etc. Inductive loads must be shunted with an antiparallel diode.
-20
20
40
60 C
Tamb.
Dimensions - mm
+(-)A1 5 - 32 VDC -(+)A2 1 CSS DC-N 2 5 - 50 VDC
+(-)A1 5 - 32 VDC -(+)A2
1 CSS DC-N 2 5 - 50 VDC
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
B1201
59
IRC
CSS-AC
S10, S10-M, S10-P, S-10K
Solid state relay AC inductive loads switching One open contact 3 A @ 24-250 V AC, 50/60 Hz
Range of input voltage Drop-out voltage Input current Current stabilizer Peak inrush voltage protection 5-32 VDC <2.5 VDC 5-15 mA Yes EC-1000-4-5 Level 1
CSS-AC
AC Instantaneous Output
Ouput, Instantaneous
+(-)A1
-(+)A2
Max. output current Minimum output current Max. output voltage Minimum output voltage Max. drop voltage Max. leakage current Max. Dv/dt I2t for 10 ms. fuse
3A 50 mA 250 VAC 24 VAC <1.5 VAC 0.55 mA 500 V/s 50 A2/s
Max. AC Load vs. Ambient Temperature

A CSS-AC
3
Specifications
Dielectric strength input/output Operate time Release time Working temperature, max. Storage temperature, max. Weight avg. 4 KV/1min. 1/2 cycle 2 ms + 1/2 cycle 60C 80C 28 g
Applications
Suitable to switch inductive loads up to 3 A/250 VAC. In switching loads with a high inrush or overcurrent (max. Di/dt 50 A/s) such as transformers, motors or fluorescents, the maximum output current limit it 2 A.
-20
20
40
60 C
Tamb.
Dimensions - mm
+(-)A1 5 - 32 VDC -(+)A2 1 CSS AC 2 230 VAC
+(-)A1 5 - 32 VDC -(+)A2
1 CSS AC 2
M 230 VAC
60
B1201
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
IRC
CSS-AZ
S10, S10-M, S10-P, S-10K
Solid state relay AC resistive loads switching One open contact 3 A @ 24-250 V AC, 50/60 Hz
Range of input voltage Drop-out voltage Input current Current stabilizer Peak inrush voltage protection 5-32 VDC <2.5 VDC 5-15 mA Yes EC-1000-4-5 Level 1
CSS-AZ
AC, Syncronized to Zero

Ouput, Synchronized to Zero
+(-)A1
Z
-(+)A2
Max. output current Minimum output current Max. output voltage Minimum output voltage Max. drop voltage Max. leakage current Max. Dv/dt I2t for 10 ms. fuse
3A 50 mA 250 VAC 24 VAC <1.5 VAC 0.55 mA 500 V/s 50 A2/s

A CSS-AZ
3
Specifications
Dielectric strength input/output Operate time Release time Working temperature, max. Storage temperature, max. Weight avg. 4 KV/1min. 1/2 cycle 2 ms + 1/2 cycle 60C 80C 28 g
Applications
Switches AC resistive loads up to 3 A/250 VAC in the zero point of the tension and avoids any overcurrent peak in the connection.
-20
20
40
60 C
Tamb.
Suitable to switch resistors, incandescent lamps, signalling, etc.
Dimensions - mm
Not suitable for inductive loads.
+(-)A1 5 - 32 VDC -(+)A2
1 CSS AZ 2 RES 230 VAC
+(-)A1 5 - 32 VDC -(+)A2
1 CSS AZ 2 230 VAC
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
B1201
61
Notes:
62
B1201
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
SOCKETS
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
B1201
63
MRC
Socket for Universal 8-Pin Relays
S2-B
Two pole, one level, coding ring Integrated clip and marking label 10 A 300 V
Socket for MRC, 8-Pin Plug-In Relay Types C2-A20, C2-G20, C2-T21
Accepts the exclusive RELECO coding ring for coding both relay and socket DIN rail or panel mountable Removable label EN/DIN and sequencial numbering
According to EN 60947-1 and IEC 61810-5
Wiring Diagram
7 ( A2 ) 8 ( 21 ) 1 ( 11 ) 2 ( A1) 6 ( 24 ) 5 ( 22 ) 4 ( 12 ) ( 14 )
Specifications
Nominal Load: Insulation: Dielectric strength, 1 minute Between contacts and coil Between all terminals and rail DIN Between adjacent poles Wire In-Lets Capacity: Solid wire Multi-core Ferrule tip terminals Max. screw torque Screw dimensions Integrated hold-down clip Removable marking label 10 A/300 V
2.5 KV 2.5 KV 2.5 KV
Dimensions - mm
8.2
4 mm2 or 2 x 2.25 mm2 22-14 AWG 4 mm2 1.2 Nm M3, Pozi
5.3
24
Lloyds
M3
RELECO
A2 21 11 A1
24 22 12 14
29.75
68
64
B1201
www.turck.us
38
1-800-544-7769
8 1 2
5 4
S2-B
Fax: (763) 553-0708
MRC
S2-S
Two pole, two level, coding ring Integrated clip and marking label 10 A 300 V
Socket for MRC, 8-Pin Plug-In Relay Types C2-A20, C2-G20, C2-T21
Accepts the exclusive RELECO coding ring for coding both relay and socket DIN rail or panel mountable Removable label EN/DIN and sequencial numbering
Wiring Diagram
7 ( A2 ) 8 ( 21 ) 6 ( 24 ) 5 ( 22 )
Specifications
2 ( A1)
1( 11 )
3 ( 14 )
4 ( 12 )
2.5 KV 2.5 KV 2.5 KV
Dimensions - mm
8.2
4 mm2 or 2 x 2.25 mm2 22-14 AWG 4 mm2 1.2 Nm M3, Pozi
7.2
5.3
M3
7 A2
10
M3.5
30
80
38
3 14 4 12
25
6 24 5 22 8 21
RELECO
7 5
Label
2 4
S2-S
2 A1
1 11
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
B1201
65
MRC
PC Sockets for Relays C2- and C3-
S2-L S2-PO
2-Pole Flange Panel Mountable 2-Pole Printed Circuit with Flange
S3-L S3-PO
S2-L
Specifications
S2-PO
10 A/300 V 2.5 KV
S3-L
Specifications
Nominal Load Dielectric Strength Adjacent Pin
S3-PO
10 A/250 V 2.5 KV
Printed Circuit Lay-Out

45

3244 3244
1.3
5 6 7 8 1 4
1.3
7 6 5 4 3 10 11 2 1
17.5
Dimensions - mm
3.4
Dimensions - mm
3.4 38
19
38
39 49 4 49
39 4
29.5
L
7 15 10
29.5
L
10 15 7
S2-L
S3-L
1
4.7
PO S2-PO
PO S3-PO
15
66
B1201
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
15
4.7
MRC
S3-S
Three pole, two level, coding ring Integrated clip and marking label 10 A 250 V
Socket for MRC, 11-Pin Plug-In Relay Types C3-A30, C3-G30, C3-T31, C3-X10, C3-M10, C3-R20, C3-E24, C3-N34
Accepts the exclusive RELECO coding ring for coding both relay and socket. DIN rail or panel mountable Removable label EN/DIN and sequencial numbering
Wiring Diagram
10 ( A2 ) 11( 31 ) 6 ( 21 ) 2 ( A1) 1( 11 ) 9 ( 34 ) 7 ( 24 ) 3 ( 14 ) 8 ( 32 ) 5 ( 22 ) 4 ( 12 )
Specifications
2.5 KV 2.5 KV 2.5 KV
Dimensions - mm
8.2
4 mm2 or 2 x 2.25 mm2 22-14 AWG 4 mm2 1. 2 Nm M3, Pozi
7.2
5.3
M3
10 A2 11 31
10
M3.5
30
80
38
3 14 4 12
25
9 34
RELECO
8 32
10 7
7 24
5 22
6 21
5 2
S3-S
2 A1
1 11
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
B1201
67
MRC
S3-B
Three pole, one level, coding ring Integrated clip and marking label 10 A 250 V
Socket for MRC, 11-Pin Plug-In Relays Types C3-A30, C3-G30, C3-T31, C3-X10, C3-M10, C3-R20, C3-E24, C3-N34
Accepts the exclusive RELECO coding ring for coding both relay and socket. DIN rail or panel mountable Removable label EN/DIN and sequencial numbering
Wiring Diagram
9 ( 34 ) 10 ( A2 ) 11 ( 31 ) 1 ( 11 ) 2 ( A1) 3 ( 14 ) 8 ( 32 ) 7 ( 24 ) 6 ( 21 ) 5 ( 22 ) 4 ( 12 )
Specifications
2.5 KV 2.5 KV 2.5 KV
Dimensions - mm
8.2
5.3
24
Lloyds
M3
34 A2 31 11 A1 14
9 1 0 11 1
RELECO
10 7
32 24 21 22 12
29.75
68
68
B1201
www.turck.us
38
1-800-544-7769
7 6
S2-B
2 3
Fax: (763) 553-0708
MRC
S3-MP
Three pole, one level Accepts plug-in modules M3P in parallel with the coil 10 A 250 V
Socket for MRC, 11-Pin Plug-In Relay Types C3-A30, C3-G30, C3-T31, C3-X10, C3-M10, C3-R20, C3-E24, C3-N34
DIN rail or panel mountable Removable label EN/DIN and sequencial numbering
Wiring Diagram
10 (A2) 11 (31) 6 (21) 1 (11) 2 (A1)
M o d u l e
9 (34) 8 (32) 7 (24) 5 (22) 3 (14) 4 (12)
Specifications
2.5 KV 2.5 KV 2.5 KV
Dimensions - mm
8.2
7.5
4.3
3.2
A2 31 21 11 34 32 24 22 14 12
10 11 6
29.5
75
38
26
9
RELECO S3-MP
10
8 7 5
1
2
www.turck.us
A1
1-800-544-7769
Fax: (763) 553-0708
B1201
69
MRC
S4-J
Four pole, two level, logic wiring Integrated clip and marking label 10 A 250 V
Socket for MRC, 14-Pin Plug-In Relay Types C4-A40, C4-X20, C4-T31, C4-R30
According to EN 60947
Wiring Diagram
Specifications
Nominal Load: Insulation: Dielectric strength, 1 minute Between contacts and coil Between all terminals and rail DIN Between adjacent poles 10 A/250 V
2.5 KV 2.5 KV 2.5 KV
Dimensions - mm
9
Wire In-Lets Capacity: Solid wire Multi-core Ferrule tip terminals Max. screw torque Screw dimensions Integrated hold-down clip Removable marking label
32
5.5
Lloyds
M4/M5
11 44 8 34 5 24 2 14
12 41 9 31 6 21 3 11
92
70
B1201
www.turck.us
38
14 21 13 A1
10 42 7 32 4 22 1 12
RELECO S2-B
12 14 13 3
11 8 5 2
10
9 6
7 4 1
1-800-544-7769
Fax: (763) 553-0708
MRC
PC Sockets for Relays C4- and C5-
S4-L S4-PO
S5-L S5-P S5-PO
3-Pole Flange Panel Mountable 3-Pole Printed Circuit 3-Pole Printed Circuit with Flange
S4-L
Specifications
S5-L S4-PO
Specifications
10 A/250 V 2.5 KV
S5-PO S5-P
16 A/400 V 4 KV

24 8

22.1
2.5
5.5 0.9 8.3 7.7
1.5
6.5 0.2 7 6.75 6.75
Dimensions - mm
S4-PO
35.5 M3 6 15.5 6 7.5
Dimensions - mm
S4-L
35.4 M3
S5-PO
5 15.4 7.5
S5-L
7.3
57
47
S4-L
57
RELECO
47
S4-P
S5-P
RELECO
36
S4-P
36
1.2
2.8
3.5
35.5
35.4
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
B1201
71
MRC
Socket for Square Socket Relays C5-
S5-S
Three pole, two level, logic wiring Integrated clip and marking label 16 A 400 V
Socket for MRC, 11-Pin Plug-In Relay Types C5-A20, C5-A30, C5-G30, C5-X10, C5-M10, C5-M20, C5-R20
Wiring Diagram
12 ( 41 ) 14 ( A2 ) 9 ( 31 ) 6 ( 21 ) 3 ( 11 ) 13 ( A1) 10 ( 42 ) 7 ( 32 ) 4 ( 22 ) 1 ( 12 ) 11 ( 44 ) 8 ( 34 ) 5 ( 24 ) 2 (14 )
Specifications
4 KV 4 KV 4 KV
Dimensions - mm
6.5
11.5
4.2
M4
B A2 9 31 8 21 7 11 A A1
8.3
80
72
B1201
www.turck.us
38
1 12 4 14
29.4
3 32
RELECO S5-S
6 34 5 24
2 22
1-800-544-7769
Fax: (763) 553-0708
QRC
Socket for Miniature Two Pole C7-
S7-M
Two pole, one level Integrated clip and marking label 10 A 250 V
Socket for QRC, 2-Pole Plug-In Relay Types C7-A20, C7-T21, C7-G20, C7-X10, C7-W10
Wiring Diagram
8 ( A2 ) 6 ( 21 ) 5 ( 11 ) 7 ( A1) 4 ( 24 ) 2 ( 22 ) 3 ( 14 ) 1( 12 )
Specifications
2.5 KV 2.5 KV 2.5 KV
Dimensions - mm
26
Lloyds
www.turck.us
A2 21 11 A1
24 22 14 12
8
S7-M
RELECO
6 5 7
3 1
1-800-544-7769
Fax: (763) 553-0708
B1201
73
QRC
Socket for Miniature C7- Relays
S7-I/O
Two pole, one level Integrated clip and marking label 10 A 250 V
Socket for QRC, 2-Pole Plug-In Relay Types C7-A10

Wiring Diagram
Specifications
2.5 KV 2.5 KV 2.5 KV
Dimensions - mm
Lloyds
74
B1201
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
QRC
Socket for Miniature C7-A10 Relays
S7-16
One pole, one level Integrated clip and marking label 16 A 250 V
Socket for MRC, 1-Pole Plug-In Relay Types C7-A10

Wiring Diagram
8 (A2)
M o d u l e
Specifications
Nominal Load:
4 (14)
16 A/250 V
5 (11) 7 (A1)
Insulation: Dielectric strength, 1 minute Between contacts and coil Between all terminals and rail DIN Between adjacent poles
1 (12)
2.5 KV 2.5 KV 2.5 KV
Dimensions - mm S7-16 for use with C7-A10 (16A)
Wire In-Lets Capacity: Solid wire Multi-core Ferrule tip terminals Max. screw torque Screw dimensions Integrated hold-down clip Removable marking label
26
Lloyds
75
22.5
12 1
www.turck.us
A2 11 A1
14
8
S7-16
RELECO
5 7
1-800-544-7769
Fax: (763) 553-0708
B1201
75
QRC
PC Sockets for Relays C7- and C9- 2-Pole Circuit 2-Pole Printed Flange Panel Mountable
S7-P
S9-P
4-Pole Printed Circuit
Printed Circuit S7-PO 2-Pole with Flange
Printed Circuit S9-PO 4-Pole with Flange
S7-P
Specifications
S7-PO
10 A/250 V 2.5 KV
S9-PO
Specifications
S9-P
6 A/250 V 2.5 KV

10

4.4
0.6
4.7 5.9 7.25
4.05 0.6 6.35 6.35
14.5
2.5
13.2
1.7
Dimensions - mm
S7-PO
22.5 M3 5.2 13.1
Dimensions - mm
S9-PO
22.5 M3 4 12.6
1 3 5
36.4
3 7
2 6
4 6 8
36.4
1 5
12 11 10 9
RELECO
S9-L
46
RELECO S7-L
46
14
13
S7-P
2 4 1 3
S9-P
4 8 3 7 2 6 1 5
30
30
6 8
S7-P
5 7
12 11 10 9
RELECO
S9-P
RELECO
3.5
1.2
2.6
14
13
22.5
Lloyds 76 B1201
www.turck.us 1-800-544-7769
22.5
Lloyds
Fax: (763) 553-0708
QRC
Sockets for Miniature Four Pole C9-
S9-M
Four pole, two level Integrated clip and marking label 6A 250 V
Socket for QRC, 4-Pole Plug-In Relay Types C9-A41, C9-E21, C9-R21
Wiring Diagram
Specifications
2.5 KV 2.5 KV 2000 V
Dimensions - mm
20.5
46.5
Lloyds
75
22.5
26
A2 A1 12 11 10 9 44 34 24 14 8 7 6 5 42 32 22 12 41 31 21 11 4
12 11 10 9 14 S9-M 13
RELECO
14 13
8 7 6 5
3 2 1
3 2 1
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
B1201
77
IRC
S10
Socket for C10-C14-CSS relays DIN rail or panel mountable 10 A 250 V
Interface I/O socket, with terminals in-line for relays C10A, C10G, C10T, CSS Specifications
Poles Nominal load Dielectric strength Coil - contacts Terminals - Rail Max. screw torque Multi-core capacity Solid wire capacity Weight average 1 10 A/250 V 5 KV 5 KV 1.2 Nm 22-14 AWG 4 mm2 or 2 x 2.25 mm2 28 g
Wiring Diagram
Other Aspects
Hard brass tin-plated terminals Brass zinc-plated solid screws Integrated clip Removable marking label
Dimensions - mm
6
Accessories
Bridge bar for coil and movable contact (S10-BB) Integrated clip DIN rail or panel mounting Maximum current through bridge 10 A Maximum current input common cable 20 A
26 12.5
3.5 39.5
2.8
12
M3 75
3.4
Bridge Bus Bar S10-BB
78
B1201
www.turck.us
15.6
14
A2 A1
A2
6 4
S10
11
11 2
1-800-544-7769
Fax: (763) 553-0708
IRC
S10-M
New I/O socket for IRC relays one change-over contact 16 A 250 V
I/O socket, with terminals in-line for relays C10A, C10G, C10T, C14A, C14G, C16A, C16G and CSS
Both this socket and the S12 are designed to get a homogeneous set with identical terminal disposition, which allows the easy identification of the contacts set in each level and a simpler wiring.
Wiring Diagram
5(A2) 6(A2) 4(A1) 3(12) 2(11) 1(14)
Both A2 terminals allow a secure interconnection through external bridges among an unlimited number of these sockets or a mixture of S10-M and the S12. The A2 terminal, free on both the first and last sockets, is used to connect the cable of common polarity.
Dimensions - mm
6
Specifications
Nominal load 16 A/250 V Insulation: Dielectric strength, 1 minute Between coil and contacts 5 KV Between all terminals and rail DIN 5 KV Max. screw torque 1.2 Nm Screw dimensions M3, Pozi Wire in-lets capacity: Solid wire 4 mm2 or 2 x 2.25 mm2 Multi - core 22-14 AWG Ferrule tip terminals 4 mm2 Integrated hold-down clip Removable marking label
12.5
3.5 39.5 2.8
M3 75
3.4
61
75
16.9
26 A2 A2 A1 12 11 14
5
S10-M 6 4
3 2 1
IEC 61810 EN 60947
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
B1201
79
IRC
S10-P
Printed circuit socket for 1 pole IRC Relays
S12-P
Printed circuit socket for 2-pole IRC Relays
Specifications
Nominal load Dielectric strength, 1 min. Coil terminals to contacts Hard brass tin-plated terminals Integrated hold-down clip 10 A/250 V 5KV 0.5 x 1 mm
Specifications
Nominal load 5 A/250 V Dielectric strength 1 min. Coil terminals to contacts Hard brass tin-plated terminals Integrated hold-down clip 5KV 0.5 x 1 mm
14.8
5.2
13.4
14.8
13.6
31.7
31.7
S10-P
3.65
S12-P
3.65
4 1.6 2.1
7.5 1.2 5
4.5 4 15 2.5
1.6
5
7
7.5
IEC 61810
EN 60947
80
B1201
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
3.4
20
IRC
S12
New I/O socket for IRC relays two pole, change-over contacts 5A
New I/O socket with terminals in-line, for relays C12, C12G, C15 and C15G
Both this socket and the S10-M are designed to get a homogeneous set with identical terminal disposition, which allows easy identification of the contacts set in each level and simpler wiring.
Wiring Diagram
5(A2) 6(A2) 4(A1) 9(22) 8(21) 7(24) 3(12) 2(11) 1(14)
Both A2 terminals allow a secure interconnection through external bridges among an unlimited number of these sockets or a mixture of S12 and the S10-M. The A2 terminal, free on both the first and last sockets, is used to connect the cable of common polarity.
Dimensions - mm
Specifications
Poles Two change-over contacts Nominal load 5 A/250V Insulation: Between coil and contacts 5 KV Between every terminal and DIN rail 5 KV Between adjacent contacts 3 KV Max. screw torque 1.2 Nm Wire in-lets multi-core capacity 22-14 AWG Solid wire or ferrule tips capacity 4 mm2 Solid terminals of zinc-plated brass Integrated hold-down clip Removable marking label
20.5 3.5 39.5 2.8 3.4 75 16.9 26 46.5 22 21 24 12 11 14

9 3 8 2 7 1
12.5 A2 A2 A1 61
www.turck.us
5
S12 6 4
M3 75
1-800-544-7769
Fax: (763) 553-0708
B1201
81
Notes:
82
B1201
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
TIMERS
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
B1201
83
TIME CUBE
8 and 11-Pin, Time Cube
The modules CT 2 and CT 3 are electronic timers that are designed to be inserted beween a standard plug-in relay and its socket, enabling the relay to be operated as a timer relay. The CT modules are able to accept any standard 8 or 11-Pin RELECO series C2 or C3 as well as those from any other supplier. The relay coil voltage must be in the range shown for each model.
CT 2A CT 3A CT 2B CT 3B CT 2E CT 3E
Off delay Blinker On delay
The timing starts when S is switched off. The relay drops out at time (t).
R
The relay blinks ON/OFF at time (t) when switch S is closed. First pulse, ON.
R
The timing starts when the switch S is closed. The relay pulls in at the time (t).
R
Function A
10 (7) 2 S
Function B
10 (7) S +
Function E
10 (7) 2
S
S
S R
S t R
R t
~
CT CT CT CT CT CT CT CT
t t t
S +
2-A30/S* .......9.5-18 V 2-A30/L ..........20-65 V 2-A30/M .......90-150 V 2-A30/U .....180-265 V 3-A30/S* .......9.5-18 V 3-A30/L ..........20-65 V 3-A30/M .......90-150 V 3-A30/U .....180-265 V
CT 2-B30/S* ........ 9.5-18 V CT 2-B30/L ........... 20-65 V CT 2-B30/H ........ 90-265 V CT 3-B30/S* ........ 9.5-18 V CT 3-B30/L ........... 20-65 V CT 3-B30/H ........ 90-265 V
CT 2-E30/S* ........ 9.5-18 V CT 2-E30/L ........... 20-65 V CT 2-E30/H ........ 90-265 V CT 3-E30/S* ........ 9.5-18 V CT 3-E30/L ........... 20-65 V CT 3-E30/H ........ 90-265 V
*All types are for AC/DC except S voltage range (only DC)
CT2... (8-Pin) and CT3... (11-Pin) types with time range from 0.2 seconds to 30 minutes (range 30) Specifications
Time accuracy Repetition +0.5%/20 ms Supply voltage 1 ms / volt. Ambient temperature -0.25% / K Reset time (types E, W, B) <150 ms Reset time (types A, K) <200 ms Triggering time: AC, 80 ms; DC, 50 ms Ambient temperature -10C to +60C Transient protection IEC 255.4 Housing material Noryl SE1 (UL94 V-1) Protection class (DIN 40050) IP 40 Weight avg. 35 g
Time Range Setting

Range 30 0.2-3 s Dip - Sw
Dimensions
7654
10 9 8
32 1
5 4
50
7 8 9
2-30 s 0.2-3 min 2-30 min

35
3 2 1 1 1 10
12.5
24.5
84
B1201
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
TIME CUBE
8 and 11-Pin, Time Cube
The modules CT 2 and CT 3 are electronic timers that are designed to be inserted beween a standard plug-in relay and its socket, enabling the relay to be operated as a timer relay. The CT modules are able to accept any standard 8 or 11-Pin RELECO series C2 or C3 as well as those from any other supplier. The relay coil voltage must be in the range shown for each model.
CT 2K CT 3K CT 2W CT 3W
One shot, aux. pulse One shot
The relay turns ON with a pulse on the switch S and turns OFF at the time (t).
R
The relay turns ON as switch S is closed and turns OFF at the time (t).
R
Function K
10 (7) 2 S
Function W
10 (7) 2
S
S
S R t
R t
~
CT CT CT CT CT CT CT CT
S +
2-K30/S* ........ 9.5-18 V 2-K30/L ........... 20-65 V 2-K30/M ........ 90-150 V 2-K30/U ...... 180-265 V 3-K30/S* ........ 9.5-18 V 3-K30/L ........... 20-65 V 3-K30/M ........ 90-150 V 3-K30/U ...... 180-265 V
CT 2-W30/S* ......9.5-18 V CT 2-W30/L .........20-65 V CT 2-W30/H ......90-265 V CT 3-W30/S* ......9.5-18 V CT 3-W30/L .........20-65 V CT 3-W30/H ......90-265 V
*All types are for AC/DC except S voltage range (only DC)
CT2... (8-Pin) and CT3... (11-Pin) types with time range from 0.2 seconds to 30 minutes (range 30) Specifications
Time accuracy Repetition +0.5%/20 ms Supply voltage 1 ms / volt. Ambient temperature -0.25% / K Reset time (types E, W, B) <150 ms Reset time (types A, K) <200 ms Triggering time: AC, 80 ms; DC, 50 ms Ambient temperature -10C to +60C Transient protection IEC 255.4 Housing material Noryl SE1 (UL94 V-1) Protection class (DIN 40050) IP 40 Weight avg. 35 g
Time Range Setting

Range 30 0.2-3 s Dip - Sw
Dimensions
7654
10 9 8
32 1
5 4
50
7 8 9
2-30 s 0.2-3 min 2-30 min

35
3 2 1 1 1 10
12.5
24.5
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
B1201
85
Notes:
86
B1201
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
RINT
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
B1201
87
RINT
Interface Modules
RINT Relay and Accesories Part Number Key

Part Number Keys are to assist in IDENTIFICATION ONLY. Consult factory for catalog items not identied.
RINT interface relays consist of two components: Relay Socket
Complete Relay Module (Relay and Socket 6.2 mm) Part Number Key
RINT - X
Relay Interface Module
X / UC X
Nominal Voltage
24 V 230 V
Socket Terminal Type

1 = AgSnO2 2 = AgSnO2 + min. 3 Au
Relay Contact Material

1 2 5 8 = = = = AgSnO2 AgSnO2 + min. 3 Au Solid State N.O. 2 A DC 24 V Solid State N.O. 2 A AC 250 V
Relay Part Number Key
RINT - R
Relay Interface Module Relay Contact Material
1 2 5 8 = = = = AgSnO2 AgSnO2 + min. 3 Au Solid State N.O. 2 A DC 24 V Solid State N.O. 2 A AC 250 V
X / UC X
V
Nominal Voltage
24 V 60-240 V
88
B1201
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
RINT
Interface Modules
DESCRIPTION Screw terminal AgSnO2 Cage clamp AgSnO2 Screw terminal AgSnO2 Cage clamp AgSnO2 Screw terminal AgSnO2 +3 Au Cage clamp AgSnO2 +3 Au Screw terminal AgSnO2 +3 Au Cage clamp AgSnO2 +3 Au Solid State screw terminal, DC loads Solid State cage clamp, DC loads Solid State screw terminal, AC loads Solid State cage clamp, AC loads
RELAY + SOCKET RINT-11 / UC24V RINT-21 / UC24V RINT-11 / UC230V RINT-21 / UC230V RINT-12 / UC24V RINT-22 / UC24V RINT-12 / UC230V RINT-22 / UC230V RINT-15 / UC24V RINT-25 / UC24V RINT-18 / UC24V RINT-28 / UC24V
RELAY RINT-R1/UC24V RINT-R1/UC60-240V RINT-R2/UC60-240V RINT-R5/DC24V RINT-R8/DC24V
DESCRIPTION Relay module contacts AgSnO2 Relay module contacts AgSnO2 + 3 Au Relay module contacts AgSnO2 + 3 Au Solid State relay module, DC loads Solid State relay module, AC loads
BRIDGES RINT-BR1-500B RINT-BR1-500G RINT-BR2-06G/10 RINT-BR2-06B/10 RINT-BR2-06R/10
ACCESORIES Blue bridges (1 unit, 500 mm) Grey bridges (1 unit, 500 mm) Grey bridges (10 units) Blue bridges (10 units) Red bridges (10 units)
LABELS RINT-MA6-0/100
ACCESORIES Labels (100 units)
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
B1201
89
RINT
Interface Modules
Relay module up to 6 A 250 V, different contact material Solid state modules DC, AC up to 2 A Coil UC = AC/DC, not polarised, integrated freewheeling circuit LED status display Screw terminals or spring cage terminals Optional coloured bridges for different connections Narrow mounting 6.2 mm
Connector bridge
With screw terminals (1x0.2-2.5mm2) RINT-11, -12, -15, -18
With spring clamp terminals (1x0.2-2.5mm2) RINT-21, -22, -25, -28
RINT-11, RINT-21 Interface module

Complete with integrated LED and switching module

Specially for PLC, process controls with DC currents. Contact AgSnO2+3Au. With screw terminals (RINT-12) or spring cage (RINT22). No external freewheeling circuit required. Recommended max. load 250V 6A resistive. Bridges optional.
Interface module
for PLCs and process control. High power contact gSnO2. With screw terminals (RINT-11) or spring cage terminals (RINT-21). No external freewheeling circuit required. Bridges optional.
MAX
Prep.
6 A 250 V
100 mA / 12 V
6 A 250 V
100 mA / 12 V
MIN
Technical data (Tamb 20C) Contact type/material Switching power AC1 Switching power DC1 24V/230V Switching power AC15 Peak inrush current Switching cycles: mech./elec. Isolation EN 61810-5 Operation voltage AC50/60Hz/DC Power consumption Pmax. 24V/230V On delay/release time Temp.: operating/(storage) UC 50/60Hz/ Ordering-No. CO/AgSnO2 1500 W 140 W / 40 W NO 750 W / NC 375 W 10 A / 4 s 10x106 / 105 4 kV -20 to +100% 170 / 217 mW 5 ms / 2.5 ms -40C to 80C/-40C to 85C CO/AgSnO2 + 3Au 1500 W 140 W / 40 W 10 A / 4 s 10x106 / 105 4 kV -20 to +100% 170 / 217 mW 5 ms / 2.5 ms -40C to 80C/-40C to 85C
24, 230
RINT-11/UC.....V RINT-21/UC.....V
24, 230
RINT-12/UC.....V RINT-22/UC.....V
DC
10%
Replacement Relay RINT-R1/UC60-240V RINT-R1/UC24V RINT-R2/UC60-240V RINT-R2/UC24V
90
B1201
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
RINT
Interface Modules
Connector bridge: RINT-BR....
Relay module RINT-R1; RINT-R2 Label: MA6-0/100 Solid-state module RINT-R5; RINT-R8
RINT-15, RINT-25 Solid State Interface module

for PLCs and process control. DC solid state switch, type NO. For fast and high frequently switching. With screw terminals (RINT-15) or spring cage terminals (RINT-25). Bridges optional.

for PLCs and process control. AC output interface 0 synchronous switching NO for resistive or similar load. (No transformator rec.) With screw terminals (RINT-18) or spring cage terminals (RINT-28). Bridges optional.
Order Example:
Interface module RINT-21/UC24V Connector bridge RINT-BR2-6B/10 (packing unit: 1x10 pieces) Replacement relay RINT-R1/UC24V
Accessories: 2 A 24 V
0.05 mA / 12 V
2 A 240V
25 mA / 12 V
Label: RINT-MA6-0/100 (100 pieces) Bridges: 500mm blue: RINT-BR1-500B

(1 piece)
NO / Solide-state DC 48 W 2.5 kV -37 to +25% 185 mW <60 s / <600 s -30C to 80C/-40C to100C
NO / Solide-state AC (triac) 480 W 40 A / 20 ms 2.5 kV -37 to +25% 185 mW <60 s / <600 s -30C to 80C/-40C to100C
500mm grey: RINT-BR1-500G

(1 piece)
6mm blue:
(10 pieces)
RINT-BR2-6B/10 RINT-BR2-6G/10 RINT-BR2-6R/10
6mm grey:
(10 pieces)
6mm red:
(10 pieces)
24, 230
RINT-15/DC.....V RINT-25/DC.....V
24, 230
RINT-18/DC.....V RINT-28/DC.....V
RINT-R5/DC24V
RINT-R8/DC24V
www.turck.us
1-800-544-7769
Fax: (763) 553-0708
B1201
91
www.turck.com
USA
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Phone: (763) 553-7300 Fax: (763) 553-0708 Application Support: 1-800-544-7769 E-mail: turckusa@turck.com www.turck.us
MEXICO
TURCK MEXICO S. DE R.L. DE C.V. Carr. Saltillo-Zacatecas km 4.5 s/n Parque Industrial La Angostura Saltillo, COAH. C.P. 25070 Mexico Phone: +52 (844) 411-6650/46 Fax: +52 (844) 482-6926 Local Toll Free: 01-800-01-88725 E-mail: ventasmexico@turck.com
CANADA
CHARTWELL ELECTRONICS, INC. 140 Duffield Drive Markham, Ontario Canada, L6G 1B5 Phone: (905) 513-7100 Fax: (905) 513-7101 Toll Free: 1-877-513-7769
AUSTRALIA
TURCK Australia Pty. Ltd. Unit 5, 6-7 Gilda Court Mulgrave, Victoria 3170 Australia Phone: (+61) 3 9560 9006 Fax: (+61) 3 9560 1620 Local Toll Free: 1300 132566 E-mail: turckaustralia@turck.com
GERMANY
WORLD HEADQUARTERS Hans TURCK GmbH & Co. KG Witzlebenstrasse 7 D-45472 Muelheim an der Ruhr Federal Republic of Germany Phone: (+49) 208-49 52-0 Fax: (+49) 208-49 52 264
Printed in USA
2010 by TURCK Inc. All rights reserved. No part of the publication may be reproduced without written permission.
B1201
5/10

B1201 Releco

Uploaded by

Copyright:

Available Formats

B1201 Releco

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

B1201 Releco

Uploaded by

Copyright:

Available Formats

RELAYS

YOUR AUTOMATION SOLUTIONS PROVIDER

Fax: (763) 553-0708

TURCK Inc. Minneapolis, MN 55441

RELECO by TURCK RELAYS

Introduction Relays Sockets Timers RINT

Fax: (763) 553-0708

TURCK Inc. Minneapolis, MN 55441

Application General Purpose

Sockets S2 S3 S4 S5 S5 S7 S7 S7 S9 S10 S10 S12

C2-T21 C3-T31 C7-T21 C10-T13 C10-GT13

6 A @ 250 V 6 A @ 250 V 6 A @ 250 V 6 A @ 250 V 6 A @ 250 V

64-66 66-69 73-76 78-80 78-80

C2-G20 C3-G30 C5-G30 C7-G20 C10-G10

10 A @ 250 V 10 A @ 250 V 16 A @ 400 V 10 A @ 250 V 10 A @ 250 V 5 A @ 250 V

64-66 66-69 71-72 73-76 78-80 80-81

C3-X10 C4-X20 C5-X10

10 A @ 250 V 10 A @ 250 V 16 A @ 400 V 10 A @ 250 V

7 A @ 110 V 7 A @ 110 V 7 A @ 110 V 6 A @ 110 V

66-69 70-71 71-72 73-76

Flag Not Available

Fax: (763) 553-0708

TURCK Inc. Minneapolis, MN 55441

AC Ratings 10 A @ 250 V 10 A @ 250 V 10 A @ 400 V 5 A @ 250 V

DC Ratings 0.5 A @ 110 V 0.5 A @ 110 V 0.5 A @ 110 V 0.2 A @ 110 V

Page 66-69 70-71 71-72 76-77

LED Not Available

C3-M10 C5-M10 C5-M20

10 A @ 250 V 16 A @ 400 V 16 A @ 250 V

10 A @ 220 V 10 A @ 220 V 7 A @ 110 V

66-69 71-72 71-72

Universal 11-Pin Plug-in Universal 11-Pin Plug-in Miniature

6 A @ 250 V 6 A @ 250 V 5 A @ 250 V

66-69 66-69 76-77

Flag Not Available

Miniature, FASTON 187

R3-N30D R7-A20D R7-T21D

Universal 11-Pin Plug-in Miniature Miniature, Twin Contacts

6 A @ 250 V 10 A @ 250 V 6 A @ 250 V

66-69 73-76 73-76

Solid State Relay

CSS-AC CSS-AZ CSS-DCN CSS-DCP

Instantaneuos Zero-cross Common Negative Common Positive

3 A @ 250 V 3 A @ 250 V N/A N/A

S10 S10 S10 S10

78-80 78-80 78-80 78-80

8-Pin Plug-in Timer Module 11-Pin Plug-in Timer Module

0.5 A @ 110 V 0.5 A @ 110 V

Fax: (763) 553-0708

TURCK Inc. Minneapolis, MN 55441

System Features & Benefits

Five Colors for Easy Identification of Coil Voltage

Label Double window for the mechanical identification LED

Comprehensive Technical Label

Country Canada China Russia

Authority: Lloyds Register of Shipping

Authority: UL Specification: C 22.2; UL 508

Fax: (763) 553-0708

TURCK Inc. Minneapolis, MN 55441