2012 Product Catalogue 2012

2012 Product Catalogue
www.sopro.com
Quality materials for your home

Tilelaying on timber substrates Decorative wall nishes Refractory mortars for replaces and stoves Systems for balconies and patios
Filler systems for gypsum plasterboard
Natural stone tilelaying and grouting
Levelling of substrates Waterproong and tilelaying in swimming pools Tiling to facades and plinths Rapid-set screed systems Tilelaying in conjunction with oor heating Tilelaying on steel assemblies Installation and care of terracotta nishes
Waterproong and tilelaying in wet spaces Cleaning and care of tiling and pavements Mounting of fence posts Bitumen ller for roof repairs Cementitious wall llers Grouting of pedestrian and vehicular pavements
High-strength owapplied oor-levelling compounds Pervious bedding of segmental pavements Repair of damp masonry Waterproof bitumen membranes to basement walls Rapid-set anchoring mortars Concrete repair for fair-faced work
Tiling products Building chemical products Landscaping products
Index of contents
Tile fixing products

Tile adhesives
Application matrix for Sopro tile adhesives Tile adhesive coverage chart
page
2 27 20 19 20 27 28 51 49 50 51 52 61 62 66 66 67 78 79 84 84 85 94 95 96 99
Tile grouts
Application matrix for Sopro tile grouts Tile grout coverage chart
Surface fillers Primers and bonding agents

Application matrix for Sopro primers and bonding agents
Waterproofings Accessories
Impact sound insulation and separating layer systems
Cleaning, impregnation and maintenance Refractory products Tiling tools Decorative Stucco Tile fixing product systems
100 105 106 131
Building chemical products

Bitumen products, sealing slurries and silification Screeds, binders and construction resins Mortar and screed additives Bedding and multi-purpose mortars Surface fillers, rapid-set mortars Concrete repair Primers, bonding agents cement paints and silica sands Building chemical product systems
page
134 148 149 153 154 155 156 157 158 167 168 170 171 176 177 179
Gardening and landscaping products

Drainage and bedding mortars Paving grouts
Paving grout coverage chart
page
182 185 186 191 190 191 192 194 195 196 197 199 200 205 206 207 208 209 210 213 211 214
Waterproofings Surface gradient fillers and rapid-set mortars Cleaning, impregnation and maintenance Landscaping product systems Sopro International Sustainability/Quality management European standards for tile adhesives and tile grouts Sopro grouting colours
Tile adhesives
Tile adhesives
Thin-bed adhesives Medium-bed adhesives Thick-bed adhesives Dispersion adhesives 2 13 14 15 15 16 16 Epoxy adhesives PU adhesives Adhesive modifiers Universal adhesives
Product description
17 17 18 18
Sopro FDK 606

Tile- and insulation board adhesive
es
Cementitious tile and insulation board adhesive, meeting C1 T requirements to DIN EN 12004, for laying and bonding of ceramic tiles as well as foam, cork, peat, wood-fibre etc. insulation board. For masonry facings around bathtubs.

ted t
o
E N 12 0
04
C1T
For indoor and outdoor use C1: tensile adhesion strength 0.5 N/mm T: thixotropic high sag resistance due to fibre reinforcement Low-chromate to Regulation 1907/2006 EC, Annex XVII
Coverage: approx. 1.2 kg/m per mm coat thickness. See also page 26
Sopro SC 808
Tile adhesive
Sopro SC 809
White tile adhesive
ted t es
E N 12 0
SC 808
SC 809
04
DI DI
Test certificates Available upon request
Packaging Bag 25 kg
Packages per pallet 40
Pallet weight 1,000 kg
Cementitious flexible tile adhesive, meeting C2 TE requirements to DIN EN 12 004, offering good workability and high sag resistance, for laying and bonding of ceramic tiles.

For indoor and outdoor use C2: tensile adhesion strength 1.0 N/mm T: thixotropic high sag resistance due to fibre reinforcement E: extended open time 30 minutes Low-chromate to Regulation 1907/2006 EC, Annex XVII
C2TE
Packaging Bag 25 kg
2 Tile fixing
products
See also application matrix for tile adhesives on pages 20 27.
Tile adhesives
Product description
Sopro FF 450
Flexible tile adhesive
C2TE N S1
es
ted t
o
Cementitious flexible tile adhesive, meeting C2 TE, S1 requirements to DIN EN 12 004, offering very high coverage and excellent workability, for laying and bonding of ceramic tiles; also for underwater applications, e.g. in swimming pools and process water containers. Suitable for use in conjunction with floor heating, flexible brush-on waterproof coatings and fully vitrified stoneware.

E N 12 0
For indoor and outdoor use C2: tensile adhesion strength 1.0 N/mm T: thixotropic high sag resistance due to fibre reinforcement E: extended open time 30 minutes S1: deformability 2.5 mm Flexible Low-chromate to Regulation 1907/2006 EC, Annex XVII
04
Packaging Bag 25 kg Bag 5 kg
Packages per pallet 40 200
Pallet weight 1,000 kg 1,000 kg
Sopro FF 451
Rapid-set tile adhesive
ted t
o
Rapid-set, cementitious tile adhesive, meeting C2 FTE requirements to DIN EN 12 004, for laying and bonding of ceramic tiles; also for underwater applications, e.g. in swimming pools and process water containers.

es
EN 1
20
04
C2FTE
For indoor and outdoor use C2: tensile adhesion strength 1.0 N/mm F: early tensile adhesion strength T: thixotropic high sag resistance due to fibre reinforcement E: extended open time 30 minutes Working life: approx. 30 minutes Walkable and groutable: after approx. 3 hours Low-chromate to Regulation 1907/2006 EC, Annex XVII
Packaging Bag 25 kg
Tile adhesives
DI DI
Tile adhesives
Tile adhesives
Without any ifs and buts.
Top pro quality

Sopros No.1 the exible adhesive with a track record of over 200 million m of tiling.
C2 TE S1 to
C2TE N S1
es
ted t
E N 12 0
DIN EN 12 004 High sag resistance due to bre reinforcement With lightweight aggregate High coverage Creamy consistency
4 Tile fixing
products
04
DI
Tile adhesives
Product description
Sopros No. 1
Flexible tile adhesive Order no. 400
C2TE N S1
EN 1
es
ted t
o
Highly deformable, cementitious, highly polymer-modified flexible tile adhesive, meeting C2 TE S1 requirements to DIN EN 12 004, for laying and bonding of ceramic tiles, discoloration-resistant natural stone units and terracotta; also for underwater applications, e. g. in swimming pools and process water containers. Suitable for heated floor constructions and fully vitrified stoneware tiling. Very high coverage and excellent workability. Also for tile-on-tile applications.

20
For indoor and outdoor use C2: tensile adhesion strength 1.0 N/mm T: thixotropic high sag resistance due to fibre reinforcement E: extended open time 30 minutes S1: deformability 2.5 mm Low-chromate to Regulation 1907/2006 EC, Annex XVII
04
with al practic handle
Packaging Bag 25 kg Bag 15 kg with handle Bag 5 kg
Packages per pallet 40 70 200
Pallet weight 1,000 kg 1,050 kg 1,000 kg
Tile adhesives
DI
Tile adhesives
Tile adhesives
Product description
Sopros No.1 rapid-set

ted t es
Rapid-set, cementitious, highly polymer-modified flexible tile adhesive, meeting C2 FTE, S1 requirements to DIN EN 12 004, for laying and bonding of ceramic tiles. Suitable for heated floor constructions and fully vitrified stoneware tiling. Very high coverage and excellent workability. Suitable for use in conjunction with brush-on waterproof coatings.

C2FTE N S1
04
E N 12 0
Th in
d be
Float in g
For indoor and outdoor use Universal application: Thin-bed, floating-bed and medium-bed laying; filler coats of up to 10 mm thickness C2: tensile adhesion strength 1.0 N/mm F: early tensile adhesion strength T: thixotropic high sag resistance due to fibre reinforcement S1: deformability 2.5 mm E: extended open time 30 minutes Working life: approx. 30 minutes Walkable and groutable: after approx. 3 hours Low-chromate to Regulation 1907/2006 EC, Annex XVII
f il lin g
Me
di
bed
Sopros No.1 TW
es
E N 12 0
04
DI
S u rf
ac
e
IN Formulation
d be
Cementitious, flexible tile adhesive, C1 TE to DIN EN 12 004, for laying and bonding of ceramic tiles in underwater areas (swimming pools) and drinking water containers. Test certificates Available upon request
ted t
o
C1TE
DI
Packaging Bag 25 kg
6 Tile fixing
products
Tile adhesives
Product description
Sopros No.1 white

White, flexible tile adhesive Order no. 996
White, cementitious, highly polymer-modified flexible tile adhesive, meeting C2 TE S1 requirements to DIN EN 12 004, for laying and bonding of ceramic and natural stone tiles. Ideal for laying and grouting of glass mosaic. Particularly suitable for fully vitrified stoneware, swimming pools and heated floor constructions. Suitable for use in conjunction with brush-on waterproof coatings.

C2 N S1
TE
es
ted t
o
E N 12 0
For indoor and outdoor use C2: tensile adhesion strength 1.0 N/mm T: thixotropic high sag resistance due to fibre reinforcement E: extended open time 30 minutes S1: deformability 2.5 mm Low-chromate to Regulation 1907/2006 EC, Annex XVII
04
Sopros No. 1 white, rapid-set

White, rapid-set, cementitious flexible adhesive, meeting C2 FT requirements to DIN EN 12 004, for laying and bonding of ceramic wall/floor coverings and natural stone tiles. Ideal for fast, efficient laying and grouting of glass mosaic. Suitable for use in conjunction with brush-on waterproof coatings.

ted t es
EN 1
20
04
C2
FT
YS CR TAL
LI
NE
For indoor and outdoor use C2: tensile adhesion strength 1.0 N/mm F: early tensile adhesion strength T: thixotropic high sag resistance due to fibre reinforcement Working life: approx. 1 hour Walkable and groutable: after approx. 5 hours With ship approval Low-chromate to Regulation 1907/2006 EC, Annex XVII
HI G
TE
R BIN D
Tile adhesives
DI DI
o
W
Tile adhesives
Tile adhesives
Product description
Sopro FKM 444 XL

Highly-flexible tile adhesive
C2TE N S1
EN 1
es
ted t
o
Multi-purpose, flexible, extra-light, extra-high-coverage, dustreduced, cementitious, highly polymer-modified adhesive meeting C2 TE S1 requirements to DIN EN 12004. For laying and bonding of ceramic wall/floor coverings and discoloration-resistant natural stone tiles on all substrates. Particularly suitable for large-format fully vitrified stoneware wall and floor coverings. Also suitable for heated floor constructions and application to brush-on waterproof coatings.

20
Re
ced du du
up to
IG H E R
du
u ce d d
st
less dust*
up to
OV
Extra-sag-resistant for laying large-format tiles Extra-light with extra-high coverage Reduced dust, dust levels up to 90 % lower* Up to 60 % higher coverage rate* Universal application: Thin-bed, floating-bed and medium-bed laying; filler coats of up to 10 mm thickness T: thixotropic high sag resistance due to special fibre reinforcement E: extended open time 30 minutes S1: deformability 2.5 mm For indoor and outdoor use With ship approval Low-chromate to Regulation 1907/2006 EC, Annex XVII
04
ERAG
Th in
f il lin g
Me
di
bed
DI
st
d be
Float in g
IN Formulation
d be
S u rf
ac
Packaging Bag 15 kg with handle
Pallet weight 600 kg
8 Tile fixing
products
*Than Sopro standard thin-bed adhesives without lightweight-aggregates
Tile adhesives
Product description
NEW
Sopro FKM 555

Multi-purpose turbo flexible tile adhesive
T
es
ted t
o
Re
ced du du
up to
C2TE N S1
Multi-purpose, extra-rapid-set, cementitious flexible tile adhesive, meeting C2 FT, S1 requirements to DIN EN 12 004. For laying and bonding of ceramic wall/floor coverings. Particularly recommended for reliable laying of large-format and dishing-prone units, e.g. agglomerate tiles. Suitable for use in conjunction with floor heating. Ideal for fast-track or tightly scheduled projects and repair works where rapid reuse of floorspace is required.

04
E N 12 0
du
ce d
du
st
less dust*
after
d be
Float in g
C2 -adhesion strength
bed
IN Formulation
f il lin g
Me
di
YS CR TAL
LI
NE
For indoor and outdoor use C2: tensile adhesion strength 1.0 N/mm F: early tensile adhesion strength 0.5 N/mm after 6 hours T: thixotropic high sag resistance due to fibre reinforcement S1: deformability 2.5 mm Reduced dust, dust levels up to 90 % lower* Universal application: thin-bed, floating-bed and medium-bed laying; filler coats of up to 10 mm thickness Working life: 20 35 minutes Walkable and groutable: after approx. 2 hours Fully loadable: after approx. 5 hours At +5 C, resistant to freeze-thaw cycles after only 6 hours, tensile adhesion strength 0.5 N/mm Featuring Mikrodur technology Low-chromate to Regulation (EC) No 1907/2006, Annex XVII
Th in
HI G
TE
R BIN D
Test certificate Available upon request
Packaging Bag 25 kg Bucket 15 kg Bag 5 kg
Pallet weight 1,000 kg 495 kg 1,000 kg
N EW
Sopro FKM turbo

After 2 hours walkable and groutable Reliable laying of large-format and dishing-prone units Universal application: Thin-bed, oating-bed, medium-bed and ller coats Ideal for repair works
*Than Sopro standard thin-bed adhesives
* Than Sopro standard thin-bed adhesives
Tile adhesives
DI
st
R
S u rf
ac
e
d be
Tile adhesives
Tile adhesives
Product description
Sopro MEG 666 megaFlex S2 turbo

es
ted t
o
C2EF N S2
E N 12 0
04
Highly flexible, rapid-set, two-component, cementitious floatingbed adhesive, meeting C2 EF S2 requirements to DIN EN 12 004, for trouble-free laying of fully vitrified stoneware, natural and cast stone tiles using floating method. The stress-relieving effect of mortar matrix allows application to newly laid cement screeds (see technical product information) and floor heating constructions. Ideal for use on balconies and patios in colder season. Very high saponification resistance and flexibility due to non-redispersible liquid polymers. High long-term frost resistance due to very low water absorption.

HI G
R BIN D
Coverage: approx. 1.5 kg/m of powder and approx. 0.495 kg/m2 of dispersion per mm coat thickness.
Sopro MEG 665 megaFlex S2

E N 12 0
04
Coverage: approx. 1.5 kg/m of powder and approx. 0.495 kg/m2 of dispersion per mm coat thickness.
DI
W
YS CR TAL
LI
NE
TE
For floors, indoors and outdoors C2: tensile adhesion strength 1.0 N/mm E: extended open time 30 minutes F: early tensile adhesion strength S2: deformability 5 mm At +5 C, resistant to freeze-thaw cycles after only 7 hours with tensile adhesion strength 0.5 N/mm; tensile adhesion strength 1.0 N/mm after 10 hours Working life: approx. 45 minutes Walkable and groutable: after approx. 3 hours Low-chromate to Regulation 1907/2006 EC, Annex XVII
Packaging Duo pack 33.25 kg: Bag 25 kg Canister 8.25 kg
Pallet weight 1,000 kg 495 kg
C2E N S2
es
ted t
o
Highly flexible, two-component, cementitious floating-bed mortar, meeting C2 E S2 requirements to DIN EN 12 004, for trouble-free laying of fully vitrified stoneware, natural and cast stone tiles using floating method. The stress-relieving effect of mortar matrix allows application to newly laid cement screeds (see technical product information) and floor heating constructions. Ideal for use on balconies and patios. Very high saponification resistance and flexibility due to non-redispersible liquid polymers. High long-term frost resistance due to very low water absorption. Sopro MEG 666 megaFlex S2 turbo flexible tile adhesive is recommended for low-temperature applications and where frost action is likely.

DI
For floors, indoors and outdoors C2: tensile adhesion strength 1.0 N/mm E: extended open time 30 minutes S2: deformability 5 mm Working life: 3 4 hours Walkable and groutable: after approx. 12 hours Low-chromate to Regulation 1907/2006 EC, Annex XVII
Packaging Duo pack 33.25 kg: Bag 25 kg Canister 8.25 kg
10 Tile fixing
products
Protect from frost during transportation and storage.
Tile adhesives
Product description
Sopro MFK 446

Flexible adhesive for marble tiles
T
es
ted t
o
E N 12 0
04
C2FT
White, rapid-set, trass-bearing, cementitious, flexible natural stone tile adhesive, meeting C2 FT requirements to DIN EN 12 004, for laying and bonding of thin, calibrated, discoloration-sensitive marble and other natural stone coverings, also underwater. High protection against efflorescence, discoloration and staining. Contains Rhenish trass and white cement to reduce risk of discoloration. Suitable for use in conjunction with floor heating.

enish Rh
Trass
H
YS CR TAL
LI
NE
or
igin
al
For indoor and outdoor use C2: tensile adhesion strength 1.0 N/mm F: early tensile adhesion strength T: thixotropic high sag resistance due to fibre reinforcement Flexible Working life: approx. 1 hour Walkable and groutable: after approx. 5 hours Low-chromate to Regulation 1907/2006 EC, Annex XVII
HI G
TE
R BIN D
Sopro AHK 560

Anhydrite flexible tile adhesive
es
ted t
o
04
C1TE
Flexible, cementitious tile adhesive, meeting C1 TE requirements to DIN EN 12 004, particularly suitable for laying and bonding of ceramic tiles and fully vitrified stoneware on calcium sulphatebased substrates, e.g. calcium sulphate-based (anhydrite and self-levelling anhydrite) screeds, gypsum plasterwork etc. Reliable adhesion without ettringite formation. Tiles may be laid on unheated calcium sulphate-based screeds with a residual moisture 1.0 % CM. Resistant to moisture migration from substrate. Also suitable for use on mineral substrates and in conjunction with floor heating.

E N 12 0
For indoor and outdoor use C1: tensile adhesion strength 0.5 N/mm T: thixotropic high sag resistance due to fibre reinforcement E: extended open time 30 minutes Special adhesive for gypsum substrates Low-chromate to Regulation 1907/2006 EC, Annex XVII
Packaging Bag 25 kg
11
Tile adhesives
DI
W
DI
Tile adhesives
Tile adhesives
Product description
Sopro VF XL 413
VarioFlex large-format flexible adhesive
es
ted t
o
Re
C2E N S1
Highly flexible, cementitious thin-, medium- and floating-bed tile adhesive, meeting C2 E, S1 requirements to DIN EN 2004, particularly suitable for laying large-format ceramic tiles. Mortar consistency may be adjusted as required. Excellent deformation properties through polymer modification and fibre reinforcement. High coverage. For use in conjunction with floor heating, for heavy-duty floors and in swimming pools.

E N 12 0
ced du du
up to
du
u ce d d
Floa ti
st
less dust*
Thin b
ed
IN
ed
formula
iu m b e
For floors, indoors and outdoors Particularly suitable for large-format fully vitrified stoneware units 3-in-1 formulation: for thin-, medium- and floating-bed tilelaying Reduced dust, dust levels up to 90 % lower* For balconies and patios C2: tensile adhesion strength 1.0 N/mm E: extended open time 30 minutes S1: deformability 2.5 mm Working life: 3 4 hours Walkable and groutable: after 12 14 hours Low-chromate to Regulation 1907/2006 EC, Annex XVII
04
Re
EN 1
20
04
after
C2 -adhesion strength
du
u ce d d
st
HI G
TE
R BIN D
DI DI
st
Sopro VF HF 420
VarioFlex early high strength tile adhesive
es
bed ng
Packaging Bag 25 kg
ted t
o
ced du du
up to
C2EF
less dust*
Extra-rapid-set, early-high-strength, flexible, cementitious floatingbed tile adhesive. Ideal for fast-track or tightly scheduled schemes. For trouble-free laying of dishing-prone resin-bonded tiles, largeformat units, cast stone units, earthenware, stoneware and fully vitrified stoneware tiles, using floating method. Suitable for use in conjunction with floor heating and brush-on waterproof coatings. For trouble-free laying of large-format fully vitrified stoneware units up to 0.5 m in size on calcium sulphate-based screeds pretreated with undiluted Sopro GD 749 primer. For larger formats (jumbo-size units), calcium sulphate-based screed shall be pretreated with Sopro MGR 637 multi-purpose primer or Sopro EPG 522 epoxy primer. High reliability through full rear-face wetting and contact adhesion plus rapid crystalline water binding.

st
For floors, indoors and outdoors C2: tensile adhesion strength 1.0 N/mm E: extended open time 30 minutes F: early tensile adhesion strength 0.5 N/mm after 6 hours Working life: 30 45 minutes Walkable and groutable: after approx. 2 hours Fully loadable: after approx. 5 hours Low-chromate to Regulation (EC) No 1907/2006, Annex XVII
YS CR TAL
LI
NE
Packaging Bag 25 kg
12 Tile fixing
products
* Than Sopro standard thin-bed adhesives
Tile adhesives
Product description
Sopro VF 419
VarioFlex, rapid-set tile adhesive
es
ted t
o
Highly flexible, rapid-set, cementitious thin- and floating-bed tile adhesive, meeting C2 EF requirements to DIN EN 12 004, for efficient laying of ceramic tiles with full rear-face wetting using floating method. Particularly suitable for large-format tiles and fully vitrified stoneware. For use in conjunction with floor heating, for heavy-duty floors and in swimming pools. For balconies and patios.

E N 12 0
Thin b
ed
Floa ti
IN
ed
formula
iu m
d be
04
C2EF
Used for same applications as Sopro VF 413 For floors For indoor and outdoor use 3-in-1 formulation: for thin-, medium- and floating-bed tilelaying C2: tensile adhesion strength 1.0 N/mm E: extended open time 30 minutes F: early tensile adhesion strength Working life: approx. 45 minutes Walkable and groutable: after 4 5 hours Low-chromate to Regulation 1907/2006 EC, Annex XVII
Packaging Bag 25 kg
Sopro MG-Flex 669

es
ted t
o
Highly flexible, one-component, cementitious thin-bed adhesive, meeting C2 TE S2 requirements to DIN EN 12 004, for trouble-free laying of fully vitrified stoneware, natural and cast stone tiles. The stress-relieving effect of the mortar matrix allows application to newly laid cement screeds and floor heating constructions. Up to 30 % higher coverage than standard thin-bed adhesives.

C2TE N S2
E N 12 0
For indoor and outdoor use For walls and floors C2: tensile adhesion strength 1,0 N/mm T: thixotropic high sag resistance due to fibre reinforcement E: extended open time S2: deformability 5 mm Exceptionally high coverage Low-chromate to Regulation 1907/2006 EC, Annex XVII
04

MicroGumTechnology
Packaging Bag 15 kg
13
Tile adhesives
DI DI
bed ng
Tile adhesives
Tile adhesives
Product description
Sopro MB 425
Medium-bed tile adhesive with trass
enish Rh
Trass
or
Trass-bearing, cementitious medium-bed tile adhesive for 5 20 mm bed thicknesses. For laying and bonding of tiles, terracotta, natural and cast stone units, and ceramic coverings with high thickness tolerances. Contains Rhenish trass to reduce risk of discoloration and efflorescence. Modified by Sopro FD 447 flexibilizing dispersion to improve deformation properties of largeformat covering materials. Suitable for use in conjunction with floor heating and outdoors.

i g i n al
For indoor and outdoor use Low-chromate to Regulation 1907/2006 EC, Annex XVII
Coverage: approx. 1.3 kg/m per mm coat thickness
Packaging Bag 25 kg
Sopro MB 414
Medium-bed flexible tile adhesive with trass
Flexible, trass-bearing, cementitious medium-bed tile adhesive for 5 20 mm bed thicknesses. For laying and bonding of tiles, terracotta, fully vitrified stoneware, natural and cast stone units. Particularly suitable for laying large-format tiles, for tile-on-tile applications and in conjunction with floor heating. Contains Rhenish trass to reduce risk of discoloration and efflorescence.

es
ted t
o
E N 12 0
04
C2TE
For indoor and outdoor use Walkable: after approx. 1 day Low-chromate to Regulation 1907/2006 EC, Annex XVII C2 TE according to DIN EN 12004*
DI
enish Rh
Trass
or
i g i n al
Packaging Bag 25 kg
14 Tile fixing
products
* C2 TE to DIN EN 12004 using a 10 mm serration
Tile adhesives
Product description
Sopro MDM 888

Medium-/thick-bed tile adhesive
enish Rh
Flexible, rapid-set, polymer-modified, trass-bearing, cementitious medium- and thick-bed tile adhesive for up to 30 mm bed thicknesses, indoors and outdoors, suitable for floor heating. Particularly suitable for laying large-format tiles and natural stone coverings using medium- or thick-bed method. Contains Rhenish trass to reduce risk of discoloration and efflorescence. The rapid-setting properties reduce risks posed by dishing-prone covering materials.

Trass
or
i g i n al
For indoor and outdoor use Coat thickness: 5 30 mm Flexible Working life: approx. 30 minutes Walkable: after approx. 2 hours Low-chromate to Regulation 1907/2006 EC, Annex XVII
YS CR TAL
LI
NE
HI G
TE
R BIN D
Packaging Bag 25 kg
Sopro MDM 885

White medium-/thick-bed tile adhesive
enish Rh
Trass
or
White, flexible, rapid-set, polymer-modified, trass-bearing, cementitious medium- and thick-bed tile adhesive for up to 30 mm bed thicknesses, indoors and outdoors. Suitable for floor heating. Particularly suitable for laying large-format tiles and discolorationsensitive natural stone coverings using medium- or thick-bed method. Contains white cement and Rhenish trass to protect against discoloration and efflorescence. The rapid-setting properties reduce risks posed by dishing-prone covering materials.

i g i n al
YS CR TAL
LI
NE
For indoor and outdoor use For discoloration-sensitive natural stone Coat thickness: 5 30 mm Flexible Working life: approx. 30 minutes Walkable: after approx. 2 hours Low-chromate to Regulation 1907/2006 EC, Annex XVII
HI G
TE
R BIN D
Packaging Bag 25 kg
15
Tile adhesives
W W
A A
Tile adhesives
Tile adhesives
Product description
Sopro TVM 858

Thick-bed mortar with trass
enish Rh
Trass
or
Hydraulically setting, trass-bearing, cementitious mortar for laying and bonding of discoloration-sensitive natural stone units (e.g. Solnhofen stone tiles, Jura marble), cast stone units and window sills, using thick-bed method to DIN 18 352, DIN 18 332 and DIN 18 333. For levelling substrates made from cementitious materials, e. g. screeds and concrete, in 10 40 mm mortar beds. Application in conjunction with Sopro HSF 748.

igin
al
For indoor and outdoor use For walls and floors Classed under mortar group III to DIN 1053 For paving units For natural and cast stone units For laying glass blocks to DIN EN 4242 Low-chromate to Regulation 1907/2006 EC, Annex XVII
Packaging Bag 25 kg
Sopro FFK 440

Ready-to-use flexible tile adhesive
es
Ready-to-use, highly flexible emulsion adhesive, meeting D1 TE requirements to DIN EN 12 004, for bonding of ceramic tiles to walls, including surfaces subject to temporary moisture exposure, e. g. toilets, kitchens and bathrooms.

ted t
o
E N 12 0
04
D1TE
For indoor use For walls and floors Good workability Particularly suitable for tile-on-tile bonding
Sopro SK 441
Highly flexible ready-to-use tile adhesive
es
04
DI DI
N
Packaging Bucket 20 kg Bucket 6 kg Pot (Nr 10 in box) 1,5 kg
Pallet weight 660 kg 720 kg 300 kg
ted t
o
Ready-to-use, highly flexible emulsion adhesive, meeting D2 TE requirements to DIN EN 12 004, for laying and bonding of ceramic tiles, also in spaces with moderate exposure to moisture and splashing, e. g. damp spaces in domestic environments. Suitable for floor heating. Sopro SK 441 emulsion adhesive offers high sag resistance coupled with first-rate, smooth workability.

D2TE
E N 12 0
Highly flexible For indoor use For walls, floors and ceilings High sag resistance Particularly suitable for tile-on-tile bonding Resistant to water and damp environments
Packaging Bucket 20 kg
16 Tile fixing
products
Tile adhesives
Product description
Sopro DBE 500

Epoxy tile adhesive Components A+B
ted t
o
Two-component epoxy tile adhesive, meeting R2 T requirements to DIN EN 12 004, for laying and bonding of ceramic tiles. For areas exposed to aggressive waters, chemicals, acids, natural fats, high compressive loads and washing-out action; for use in swimming pools, industrial and commercial facilities. Suitable for floor heating and in cojunction with brush-on waterproof coatings.

es
EN 1
20
04
R2T
For indoor and outdoor use For walls and floors Suitable for underwater applications Working life: approx. 90 minutes
Sopro PUK 503

Adhesive Components A+B
Two-component, light-coloured polyurethane reaction resin adhesive, meeting R2 T requirements to DIN EN 12 004, for laying and bonding of ceramic tiles, natural and cast stone units, and resinbonded tiles, particularly to wood-based, gypsum-based and metal substrates. Meets enhanced requirements in terms of tensile and shear adhesion strengths, elasticity and watertightness on critical substrates.

es
ted t
o
04
R2
E N 12 0
Highly flexible For walls and floors For indoor and outdoor use With ship approval Working life: approx. 45 minutes
17
Tile adhesives
DI DI
Tile adhesives
Tile adhesives
Product description
Sopro FD 447
Flexibilizing dispersion
Synthetic resin dispersion used as additive to enhance adhesion and deformability of Sopro thin-bed and medium-bed tile adhesives. The adhesives tensile adhesion and shear strengths are increased, the interlock with substrate improved and reliability boosted for large-format tiles, particularly for fully vitrified stoneware and in conjunction with floor heating. Allows early laying and bonding to min. 3-month-old concrete, lightweight concrete, aerated concrete and masonry.

For walls and floors For indoor and outdoor use For renovation and refurbishment
Coverage: 2.5 kg for 25 kg dry mortar; as specified in product information
Packaging Canister 5 kg
Sopro ELD 458

Conductive dispersion
Liquid dispersion used to prepare static-dissipating, hydraulically setting, thin-bed tile adhesives and tile grouts. For static dissipation in: operating theatres, computer rooms and offices power stations, chemical plants production and storage facilities subject to explosion hazards Test certificates Available upon request
Coverage: 1.25 3.75 kg for 25 kg dry mortar
Packaging Canister 3.75 kg
Racofix
Universal adhesive Order no. 818
One-component, silane terminated polymer-based universal adhesive for bonding wide range of materials, e. g. tiles, natural stone, wood, glass, metal and plastics, and for fixing insulation materials, skirtings and metal track. Also suitable for waterproof bonding/sealing of joints in Sopro AEB 640/AEB plus 639 waterproofing and separating membranes and for fixing Sopro AEB 641 sealing tape, Sopro AEB 642/643 sealing tape for internal/external angles, Sopro AEB 644 wall collars and Sopro AEB 645 floor collars.

Water-resistant For bonding wide range of materials Practically odourless For indoor and outdoor use Colour: white
Coverage: 140 210 g/m depending on application
Packaging Cartridge 431 g (Nr 12 in box)
Packages per pallet 1,080
Pallet weight approx. 539 kg
18 Tile fixing
products
Sopro tile adhesive coverage chart
Container size
4 mm serration
6 mm serration
8 mm serration
10 mm serration 12 mm serration
(Medium-bed trowel)
Coverage Consumpt. Coverage Consumpt. Coverage Consumpt. Coverage Consumpt. Coverage Consumpt. kg/m m kg/m m kg/m m kg/m m kg/m m
Sopro AHK 560 Sopro SC 808 Sopro SC 809 Sopro DBE 500 Sopro FKM turbo 555
25 kg 25 kg 25 kg 5 kg 25 kg 15 kg 5 kg 15 kg 25 kg 5 kg 20 kg 6 kg 1,5 kg 25 kg 25 kg 25 kg 5 kg 33,25 kg 33,25 kg 15 kg 25 kg 15 kg 5 kg 25 kg 5 kg 25 kg 25 kg 5 kg 25 kg 5 kg 6 kg 20 kg 25 kg 25 kg 25 kg
1.2 1.2 1.2 1.6 1.3
20.8 20.8 20.8 3.1 19.2 11.5 3.8 21.4 22.7 4.5 12.5 3.8 0.9 19.2 20.8 20.8 4.2 22.2 22.2 16.7 25.0 15.0 5.0 20.8 4.2 20.8 22.7 4.5 20.8 4.2 4.0 12.5 17.9 19.2 25.0
1.8 1.8 1.8 2.4 2.0
13.9 13.9 13.9 2.1 12.5 7.5 2.5 13.6 14.7 3.0 8.3 2.5 0.6 12.5 13.9 13.9 2.8 14.5 14.5 10.7 16.7 10.0 3.3 13.9 2.8 13.9 14.7 3.0 13.9 2.8 2.6 8.3 11.9 12.5 16.7
2.4 2.4 2.4 3.2 2.6
10.4 10.4 10.4 1.6 9.6 5.8 1.9 10.7 11.4 2.3 6.3 1.9 0.5 9.6 10.4 10.4 2.1 11.1 11.1 8.3 12.5 7.5 2.5 10.4 2.1 10.4 11.4 2.3 10.4 2.1 2.0 6.3 8.9 9.6 12.5
3.0 3.0 3.0 4.0 3.3
8.3 8.3 8.3 1.3 7.6 4.5 1.5 8.3 8.9 1.8 5.0 1.5 0.4 7.6 8.3 8.3 1.7 8.8 8.8 6.5 10.0 6.0 2.0 8.3 1.7 8.3 8.9 1.8 8.3 1.7 1.6 5.0 7.1 7.6 10.0
3.9
6.4 3.8 1.3 7.1 6.9 1.4 6.4 8.3
Sopro FKM XL 444 Sopro FF 450 Sopro FFK 440
0.7 1.1 1.6
1.1 1.7 2.4
1.4 2.2 3.2
1.8 2.8 4.0
2.1 3.6 3.9 3.0
Sopro FF 451 Sopro FDK 606 Sopro MFK 446 Sopro MEG 665 megaFlex S2 Sopro MEG 666 megaFlex S2 turbo Sopro MG-Flex 669 Sopros No. 1 (order no. 400) Sopros No. 1 rapid-set (order no. 404) Sopros No. 1 TW (order no. 401) Sopros No. 1 white (order no. 996) Sopros No. 1 white rapid-set (order no. 997) Sopro PUK 503 Sopro VF HF 420 Sopro SK 441 Sopro VF 419 Sopro VF XL 413
1.3 1.2 1.2 1.5 1.5 0.9 1.0
2.0 1.8 1.8 2.3 2.3 1.4 1.5
2.6 2.4 2.4 3.0 3.0 1.8 2.0
3.3 3.0 3.0 3.8 3.8 2.3 2.5
1.2 1.2 1.1 1.2 1.5 1.6 1.4 1.3 1.0
1.8 1.8 1.7 1.8 2.3 2.4 2.1 2.0 1.5
2.4 2.4 2.2 2.4 3.0 3.2 2.8 2.6 2.0
3.0 3.0 2.8 3.0 3.8 4.0 3.5 3.3 2.5
All stated consumption/coverage rates depend on angle of application with notched trowel and on substrate type and levelness.
19
Tile adhesives
Tile adhesives
Application matrix tile adhesives oors
Substrate (oor)
Unheated anhydrite screed Heated anhydrite screed Cement screed, interior and exterior Cement screed, heated Concrete oors
Pretreatment/Primer
Sopro FDK 606 Standard tile adhesive
Sopro SC 808 Standard tile adhesive
Sopro FF 450 Flexible tile adhesive
Grind, vacuum and prime with Sopro GD 749 Primer. Fill any unevenness with Sopro AFS 561 Anhydrite ow-ller. Screed must be dry and remain so, residual moisture < 0.5 CM%. Heat up heated screeds in accordance with instruction sheet or DIN 4725/4. Fill up working joints and cracks with Sopro GH 564 Cast resin. In wet areas, seal in advance with 2 Sopro FDF 525 Flexible sealing compound. 28 day old and dry. Prime sanding screeds with Sopro GD 749 Primer. Fill up working joints and cracks with Sopro GH 564 Cast resin. Seal outdoor areas with 2 Sopro DSF 423/523/ 623 Flexible sealing slurry. Heat up in accordance with instruction sheet or DIN 4725/4. Prime sanding screeds with Sopro GD 749 Primer. Fill up working/dummy joints and cracks with Sopro GH 564 Cast resin. Thoroughly remove sinter layers, separating agents and blooming; sandblast if necessary. Make sure screed is sufciently sanded, remove loose residual sand and precoat with Sopro HPS 673 Bonding primer if necessary. Apply contact layer with adhesive and allow to harden. Clean thoroughly and degrease. Remove loose tiles and pre coat with Sopro HPS 673 Bonding primer or apply a contact layer with adhesi ve and allow to harden. Min. 24 mm, bending resistant, glued tongue in groove, sufciently screwed (tighten screws if necessary), permanently dry, rear ventilated; precoat with Sopro HPS 673 Bonding primer. Use Sopro TDP 558 Tile insulation boards 4 mm/9 mm/15 mm. Clean, screw down tightly, precoat with Sopro HPS 673 Bonding primer, use Sopro FDP 558 Tile insulation boards 9 mm/15 mm. Prime llers containing gypsum with Sopro GD 749 Primer.
l l l
l l l l
l l l l l
min. 3 months old
l
min. 6 months old
l
min. 3 months old
Poured asphalt, hard, GE 10, GE 15 interior/sanded unheated Tiled surfaces, old indoor areas/ oors Chipboard, oors
l l
l l l l
Wooden boards, oor Dry screed made of gypsum plaster board/plaster breboard (Fermacel) Carpet and PVC glue residue Magnesia screed
l
Always precoat with Sopro HPS 673 Bonding primer and remove foam backing residue. Old buildings: grind, vacuum and prime with Sopro 749 Primer; ll working joints and cracks with Sopro GH 564 Cast resin. New buildings: preacoat with Sopro GD 749 Primer. Observe residual moisture in accordance with the manufac turers instructions. Clean and prime with Sopro GD 749 Primer. Clean thoroughly and degrease, precoat wit Sopro HPS 673 Bonding primer. Observe system components. Clean thoroughly and degrease.
l l l l l l
l l l l l l
Stone-wood oors/ screeds Laquer coatings, non-removable Alternative sealants Metal
20 Tile fixing
products
Part I
To be continued on next page
Sopro FF 451 Rapid-set tile adhesive
Sopros No. 1 400 Flexible tile adhesive
Sopros No. 1 404 Rapid-set exible tile adhesive
Sopros No. 1 996 White exible tile adhesive
Sopros No. 1 997 Rapid-set white, exible tile adhesive
Sopro FKM XL 444 Highly-exible tile adhesive
Sopro FKM turbo Rapid-set, highlyexible tile adhesive
l l l l l
min. 3 months old
l l l l l
min. 3 months old
l l l l l
min. 3 months old
l l l l l
min. 3 months old
l l l l l
min. 3 months old
l l l l l
min. 3 months old
l l l l l
min. 3 months old
l l l l l l l l l
l l l l l l l l l l
l l l l l l l l l l
l l l l l l l l l l
l l l l l l l l l l
l l l l l l l l l l l
l l l l l l l l l l
particularly recommended
suitable
e ! as age e Pl n p r tu
21
Tile adhesives
Tile adhesives
Application matrix tile adhesives oors
Substrate (oor)
Unheated anhydrite screed Heated anhydrite screed Cement screed, interior and exterior
Pretreatment/Primer
Sopro megaFlex S2 Highly-exible oating tile adhesive
Sopro megaFlex S2 turbo, Highlyexible oating tile adhesive
Sopro MFK 446 Flexible adhesive for marble tiles
Grind, vacuum and prime with Sopro GD 749 Primer. Fill any unevenness with Sopro AFS 561 Anhydrite ow-ller. Screed must be dry and remain so, residual moisture < 0.5 CM%. Heat up heated screeds in accordance with instruction sheet or DIN 4725/4. Fill up working joints and cracks with Sopro GH 564 Cast resin. In wet areas, seal in advance with 2 Sopro FDF 525 Flexible sealing compound. 28 day old and dry. Prime sanding screeds with Sopro GD 749 Primer. Fill up working joints and cracks with Sopro GH 564 Cast resin. Seal outdoor areas with 2 Sopro DSF 423/523/ 623 Flexible sealing slurry. Heat up in accordance with instruction sheet or DIN 4725/4. Prime sanding screeds with Sopro GD 749 Primer. Fill up working/dummy joints and cracks with Sopro GH 564 Cast resin. Thoroughly remove sinter layers, separating agents and blooming; sandblast if necessary. Make sure screed is sufciently sanded, remove loose residual sand and precoat with Sopro HPS 673 Bonding primer if necessary. Apply contact layer with adhesive and allow to harden. Clean thoroughly and degrease. Remove loose tiles and pre coat with Sopro HPS 673 Bonding primer or apply a contact layer with adhesi ve and allow to harden. Min. 24 mm, bending resistant, glued tongue in groove, sufciently screwed (tighten screws if necessary), permanently dry, rear ventilated; precoat with Sopro HPS 673 Bonding primer. Use Sopro TDP 558 Tile insulation boards 4 mm/9 mm/15 mm. Clean, screw down tightly, precoat with Sopro HPS 673 Bonding primer, use Sopro FDP 558 Tile insulation boards 9 mm/15 mm. Prime llers containing gypsum with Sopro GD 749 Primer.
l l l
young cement screed: age 2 5 days old
l* l* l
l l l l l
min. 3 months old
Cement screed, heated Concrete oors
l l
young concrete: min. 28 days old
l l
Poured asphalt, hard, GE 10, GE 15 interior/sanded unheated Tiled surfaces, old indoor areas/ oors Chipboard, oors
l l l l l
l l l l l l l l l l
Wooden boards, oor Dry screed made of gypsum plaster board/plaster breboard (Fermacel) Carpet and PVC glue residue Magnesia screed
Always precoat with Sopro HPS 673 Bonding primer and remove foam backing residue. Old buildings: grind, vacuum and prime with Sopro 749 Primer; ll working joints and cracks with Sopro GH 564 Cast resin. New buildings: preacoat with Sopro GD 749 Primer. Observe residual moisture in accordance with the manufac turers instructions. Clean and prime with Sopro GD 749 Primer. Clean thoroughly and degrease, precoat wit Sopro HPS 673 Bonding primer. Observe system components. Clean thoroughly and degrease.
l l l l l l
Stone-wood oors/ screeds Laquer coatings, non-removable Alternative sealants Metal
22 Tile fixing
products
suitable
Part II
Sopro AHK 560 Anhydrite exible tile adhesive
Sopro VF XL 413 VarioFlex XL tile adhesive
Sopro VF HF 420 VarioFlex early high strength tile adhesive
Sopro VF 419 VarioFlex, rapid-set tile adhesive
Sopro MG-Flex 669, Highly-exible tile adhesive
Sopro DBE 500 Epoxy tile adhesive, two component
Sopro PUK 503 Highly-exible polyurethane adhesive, two-component
l l l l l
min. 6 months old
l l l l l
min. 3 months old
l* l* l l l
min. 3 months old
l l l l l
min. 3 months old
l l l
l l l l l
min. 3 months old
l l l l l
min. 3 months old
l l
l l
l l l l
l l l l l l l l l l
l l l l l l l l l l
l l l l l l l l l l
l l l l l
l l l l l l
* When using Sopro HF 420 VarioFlex high-strength flexible tile adhesive to lay tiles up to 0.5 m in size, pretreat with undiluted Sopro GD 749 primer; for larger formats, pretreat with Sopro MGR 637 multi-purpose primer or Sopro EPG 522 epoxy primer.
23
Tile adhesives
Tile adhesives
Application matrix tile adhesives walls
Substrate (Wall)
Interior/exterior
Pretreatment/Primer
Sopro FDK 606 Standard tile adhesive
Sopro SC 808 Standard tile adhesive
l
Plaster/air-dry, interior and exterior, Mortar Group II + III Gypsum plaster If strongly absorbent and slightly sanded, prime with Sopro GD 749 Primer. Not permitted in wet rooms! Residual moisture max. 1 CM-%, one-coat, not felted, not smoothed and not lled; prime with Sopro GD 749 Primer. Thoroughly remove sinter layers, separating agents and blooming; sand-blast if necessary. Seal wet rooms rst with 2 Sopro DSF 423/523/623 Flexible sealing slurry or Sopro FDF 525/527 Flexible sealing compound. Thick-bed laying is also possible when using Sopro DSF 423/ 523/623 Flexible sealing slurry. Prime with Sopro GD 749 Primer.
l l l l
min. 3 months old
l l l
min. 6 months old
Concrete walls, interior walls Even-surface masonry; not mixed masonry, interior/wet rooms Aerated concrete, interior walls Old tiled interior walls Faser-Zementplatten Innenrume/Wand Gypsum plaster board/ plaster breboard (Fermacell) Gypsum plaster board/ plaster breboard (Fermacell) walls/wet areas Oil paint, walls
l l
l l l l
Clean thoroughly and degrease. Remove loose tiles and precoat with Sopro HPS 673 Bonding primer or apply a contact layer with adhesive and allow to harden. Critical surface prime with Sopro GD 749 Primer.
Prime llers containing gypsum with Sopro GD 749 Primer
l
Use waterproof gypsum plaster boards; prime with Sopro GD 749 Primer; seal with DSF 423/523/623 Flexible sealing slurry or apply 2 Sopro FDF 525 Flexible sealing compound; ensure that sealing tape and collars are properly embedded. Check adhesion capability, clean thoroughly and roughen if necessary before precoating with Sopro HPS 673 Bonding primer. Min. 19 mm, bending resistant, sufciently screwed (screw down if necessary), permanently dry, rear ventilated; precoat with Sopro HPS 673 Bonding primer. Use Sopro FDP 558 Tile insulation boards 4 mm/9 mm/15 mm. Observe system components.
l l l
Chipboard, walls
Alternative sealants
Metal
Clean thoroughly and degrease.
24 Tile fixing
products
Part I
Sopro FF 450 Flexible tile adhesive
Sopro FF 451 Rapid-set tile adhesive
Sopros No. 1 400 Flexible tile adhesive
Sopros No. 1 404 Rapid-set exible tile adhesive
Sopros No. 1 996 White exible tile adhesive
Sopros No. 1 997 Rapid-set white, exible tile adhesive
l l l l
min. 3 months old
l l l l
min. 3 months old
l l l l
min. 3 months old
l l l l
min. 3 months old
l l l l
min. 3 months old
l l l l
min. 3 months old
l l l l l
l l l l l
l l l l l
l l l l l
l l l l l
l l l l l
l l l
l l
l l l
l l l
l l l
l l l
suitable
e ! as age e Pl n p r tu
25
Tile adhesives
Tile adhesives
Application matrix tile adhesives walls
Substrate (Wall)
Interior/exterior
Pretreatment/Primer
Sopro FKM XL 444 Highly-exible tile adhesive
Sopro FKM turbo Rapid-set, highlyexible tile adhesive
Sopro MFK 446 Flexible adhesive for marble tiles
l
If strongly absorbent and slightly sanded, prime with Sopro GD 749 Primer. Not permitted in wet rooms! Residual moisture max. 1 CM-%, one-coat, not felted, not smoothed and not lled; prime with Sopro GD 749 Primer. Thoroughly remove sinter layers, separating agents and blooming; sand-blast if necessary. Seal wet rooms rst with 2 Sopro DSF 423/523/623 Flexible sealing slurry or Sopro FDF 525/527 Flexible sealing compound. Thick-bed laying is also possible when using Sopro DSF 423/ 523/623 Flexible sealing slurry. Prime with Sopro GD 749 Primer.
l l l l
min. 3 months old
l l l l
min. 3 months old
Plaster/air-dry, interior and exterior, Mortar Group II + III Gypsum plaster
l l l
min. 3 months old
Concrete walls, interior walls Even-surface masonry; not mixed masonry, interior/wet rooms
Aerated concrete, interior walls Old tiled interior walls Faser-Zementplatten Innenrume/Wand Gypsum plaster board/ plaster breboard (Fermacell) Gypsum plaster board/ plaster breboard (Fermacell) walls/wet areas
l l l l
l l l l
l l l l
Clean thoroughly and degrease. Remove loose tiles and precoat with Sopro HPS 673 Bonding primer or apply a contact layer with adhesive and allow to harden. Critical surface prime with Sopro GD 749 Primer.
Prime llers containing gypsum with Sopro GD 749 Primer Use waterproof gypsum plaster boards; prime with Sopro GD 749 Primer; seal with DSF 423/523/623 Flexible sealing slurry or apply 2 Sopro FDF 525 Flexible sealing compound; ensure that sealing tape and collars are properly embed ded. Check adhesion capability, clean thoroughly and roughen if necessary before precoating with Sopro HPS 673 Bonding primer. Min. 19 mm, bending resistant, sufciently screwed (screw down if necessary), permanently dry, rear ventilated; precoat with Sopro HPS 673 Bonding primer. Use Sopro FDP 558 Tile insulation boards 4 mm/9 mm/15 mm. Observe system components.
Oil paint, walls
l l l l
l l l
l l l
Chipboard, walls
Alternative sealants
Metal
Clean thoroughly and degrease.
26 Tile fixing
products
Part II
Sopro AHK 560 Anhydrite exible tile adhesive
Sopro MG-Flex 669, Highly-exible tile adhesive
Sopro SK 441 Flexible ready-to-use tile adhesive
Sopro FFK 440 Ready-to-use tile adhesive
Sopro DBE 500 Epoxy tile adhesive, two component
Sopro PUK 503 Highly-exible polyurethane adhesive, two-component
l l l l
min. 6 months old
l l l l
min. 28 days old
only interior
only interior
l l l l
min. 28 days old
l l l l
min. 28 days old
l l l
min. 28 days old
l l l
min. 28 days old
l l l l
l l l l
l l l l
l l l l
l l l l
l l l l
l l
l l
l l l
l l l l
l l l l
suitable
27
Tile adhesives
Tile grouts
Tile grouts
N EW
Sopro DF 10 designer tile grout
Durable hygiene and lasting appeal

red colou ntly-film-free a i l l e bri d lim an
ection prot cleaners* ed c c i c d i n a ha en ainst ag
m ould for ation ts m n e v pre
dirt-repellent and r e t wa
Uniformly brilliant colouring and lime-lmfree thanks to PCF technology Easy-care due to water and dirt repellency Enhanced resistance, even to acidic cleaners* Greater protection against mould formation and microorganisms Can incorporate Sopro glitter gold or silver for enhanced visual appeal
Walkable after only approx. 2 hours, loadable after only approx. 12 hours Also for outdoor and underwater applications For all types of ceramic and for discolorationsensitive natural stone due to high crystalline water binding capacity For 1 10 mm joint widths High abrasion resistance (CG2 WA)
* compared to standard Sopro cementitious tile grouts for domestic applications
28 Tile fixing
products
Tile grouts
Product description
NEW
Sopro DF 10
Flexible designer tile grout 1 10 mm
s Te
ted to
Extra-high abraision resistance
CG2 WA
N
Walkable after only
E N 13 8
88
Reduced water absorption
Strong, flexible, rapid-set, cementitious tile grout, meeting CG2 WA requirements to DIN EN 13 888, for grouting all types of ceramic and natural stone covering to produce brilliantly coloured, lime-film-free finish. Enhanced protection against mould formation and microorganisms plus lime-film-free finish ensure brilliantly coloured joint pattern with lasting appeal, for both indoor and outdoor applications, and especially in moistureexposed areas. Inherent water-beading effect and Hydrodur technology create water- and dirt-repellent joints with antimicrobial capability. Also suitable for outdoor and underwater applications, and for grouting thin tile coverings ( 4 mm). SoproDur HF 8/HF 30 highstrength tile grouts, Sopro FEP epoxy tile grout, Sopro FEP 604 three-component epoxy tile grout or Sopro Topas DFE designer epoxy tile grout are recommended for use in swimming pools.

2 hours!
Loadable after 12 hours!
YS CR TAL
LI
TE
R BIN D
* compared to standard Sopro cementitious tile grouts for domestic applications
For all types of ceramic, natural stone, glass mosaic and agglomerate tile coverings For 1 10 mm joint widths Can incorporate Sopro glitter gold or silver for enhanced visual appeal For indoor and outdoor use For walls and floors Uniformly brilliant colouring and lime-film-free thanks to Portland cement-free (PCF) technology Easy-care due to water and dirt repellency Enhanced resistance, even to acidic cleaners* Greater protection against mould formation and microorganisms Walkable after only approx. 2 hours, loadable after only approx. 24 hours Extra-high abrasion resistance: CG2 WA to DIN EN 13 888 High crystalline water binding capacity Low-chromate to Regulation (EC) No 1907/2006, Annex XVII
HI G
Please note colourspecific order number!
Order no. Col. no. 1050 white 10 1051 light grey 16 1052 silver grey 17 1053 grey 15 1054 concrete grey14 1055 sandgrey 18
Order no. 1056 jasmin 1057 beige 1058 parchment 1059 balibrown 1060 anthracite 1061 black
Col. no. 28 32 27 59 66 90
Coverage: See page 48
Sopro DF 10 grouting colours*
white 10
light grey 16
silver grey 17
grey 15
concrete grey 14
sandgrey 18
jasmin 28
beige 32
parchment 27
balibrown 59
anthracite 66
black 90
See also application matrix for tile grouts on pages 50 51.
For technical reasons, the colours shown here may diverge from those of the fully cured material.
29
Tile grouts
DI
NE
Tile grouts
Product description
Tile grouts
Sopro Saphir 5
Water-repellent tile grout 1 5 mm joints
Flexible, water- and dirt-repellent, cementitious tile grout with water-beading effect, meeting CG2 WA requirements to DIN EN 13 888, for grouting absorbent earthenware tiles, with first-rate joint-filling properties and washability (removability). Sopro DF 10 or Sopro Brillant water-repellent tile grout are recommended for grouting low-suction tiling. Fine, smooth joint surface and high colour fastness provide tile finish with lasting appeal. Particularly suitable for use in conjunction with floor heating. Optimized mixing behaviour through new water repellency technology.

sted to Te
CG2 WA
N
E N 13 8
88
Suitable for absorbent ceramics, e.g. earthenware For 1-5 mm joint widths For walls and floors, indoors and outdoors Water- and dirt-repellent Easy-clean Antimicrobial Crack-free curing Good adhesion to joint faces and high colour fastness Low-chromate to Regulation 1907/2006 EC, Annex XVII
DI
hade tr -ig w gh g ai bh h ! t i w e w f N P ilm P! Bag lm PefiO Pd a r O g h hig

Standard colours: Order no. 910 white 911 light grey 912 silver grey 913 grey
Packaging Bag 15 kg with handle Bag 5 kg
Col. no. 10 16 17 15
Order no. 949 stonegrey 914 concrete grey 927 sandgrey

Col. no. 22 14 18
* All Sopro Saphir 5 colours except intensive colours.

Sanitary colours: Order no. 915 manhattan 918 jasmin 916 light beige 919 beige 917 parchment 920 bahamabeige
Packaging
Col. no. 77 28 29 32 27 34
Order no. 921 anemone 922 caramel 923 brown 924 balibrown 925 anthracite 926 black
Col. no. 35 38 52 59 66 90
Bag 15 kg with handle (manhattan, light beige, parchment) Bag 5 kg
Intensive colours: Order no. Col. no. 499 deep blue 98 497 signal red 91
Order no. 498 wine red
Col. no. 92
Sopro Saphir 5 and Sopro Brillant grouting colours*
Packaging Bag 5 kg
white 10
light grey 16
silver grey 17
grey 15
stone grey 22
concrete grey 14
sandgrey 18
manhattan 77
jasmin 28
light beige 29
beige 32
jurabeige 33
30 Tile fixing
products
Tile grouts
Product description
Sopro Brillant
Water-repellent tile grout 1 10 mm joints
s Te
ted to
Flexible, water- and dirt-repellent, rapid-set, cementitious tile grout with water-beading effect, meeting CG2 WA requirements to DIN EN 13888 and offering excellent workability, for grouting all ceramic coverings, cast stone, all types of natural stone, and glass mosaic. Fine, smooth joint surface, antimicrobial capability and high colour fastness guarantee a tile finish with lasting appeal. Particularly suitable for damp/wet spaces, living areas exposed to dirt/soiling, food areas, swimming pools and in conjunction with floor heating. Sopro Saphir 5 or Sopro DF 10 are recommended for grouting absorbant tiles.

CG2 WA
N
E N 13 8
e -grad h high t i w Bag ilm! OPP f
88
Particularly suitable for low-suction ceramics, e. g. fully vitrified stoneware For discoloration-sensitive natural stone For 1 10 mm joint widths Working life: 30 40 minutes For indoor and outdoor use For walls and floors Water- and dirt-repellent Easy-clean Antimicrobial Crack-free curing Fine, smooth joint surface Good adhesion to joint faces and high colour fastness With ship approval Low-chromate to Regulation 1907/2006 EC, Annex XVII
Standard colours: Order no. 801 white 802 light grey 803 silver grey 804 grey
Packaging Bag 15 kg with handle Bag 5 kg
Col. no. 10 16 17 15
Order no. 807 stonegrey 805 concrete grey 806 sandgrey

Col. no. 22 14 18
Pallet weight 1.050 kg 1.000 kg
Sanitary colours: Order no. 831 jasmin 832 light beige 833 jurabeige 834 bahamabeige 835 brown
Col. no. 28 29 33 34 52
Order no. 836 chestnut 837 balibrown 838 anthracite 839 black
Col. no. 50 59 66 90
Packaging
Bag 15 kg with handle (jura beige, bahama beige, anthracite, black) Bag 5 kg
parchment 27
bahamabeige 34
anemone 35
caramel 38
brown 52
chestnut 50
balibrown 59
anthracite 66
black 90
deep blue 98
signal red 91
wine red 92
* Only colours anthracite and black.
31
Tile grouts
DI
Tile grouts
Product description
Tile grouts
Sopro MFs
Tile grout 2 5 mm joints
Cementitious tile grout, meeting CG1 requirements to DIN EN 13 888, particularly suitable for crack-free grouting of absorbent earthenware tiles. Tailored setting behaviour, water retentivity and washability (removability). Also suitable for grouting low-suction tiling. Provides particularly smooth, appealing joint finish. For use in living and food areas, dry and wet spaces, and swimming pools. Also suitable for floor heating systems.

ted t es
E N 13 8
88
CG1
2 5 mm joint widths For indoor and outdoor use For walls and floors Low-chromate to Regulation 1907/2006 EC, Annex XVII
DI
Order no. 410 white 431 light grey

Col. no. 10 16
Order no. 430 silver grey 435 grey

Col. no. 17 15
MF grouting colours*
white 10
light grey 16
silver grey 17
grey 15
concrete grey 14
32 Tile fixing
products
Tile grouts
Product description
Sopro MFs+b
Cementitious tile grout, meeting CG1 requirements to DIN EN 13 888, particularly suitable for crack-free grouting of low-suction tiles. Tailored joint-filling properties, setting behaviour in joint, washability (removability) and strength. Also suitable for grouting absorbent tiling. Smooth, compact joint finish. For use in living and food areas, dry and wet spaces, and swimming pools. Also suitable for floor heating systems.

ted t es
EN 1
38
88
CG1
Order no. 538 silver grey 539 grey Coverage: See page 48
Packaging Bag 25 kg Bag 5 kg (grey)
Col. no. 17 15
Order no. Col. no. 559 concrete grey 14

Packages per pallet 40 200 Pallet weight 1,000 kg 1,000 kg
Sopro MFb
Cementitious tile grout, meeting CG1 requirements to DIN EN 13 888, particularly suitable for crack-free grouting of low-suction floor tiling with wide joints. Tailored joint-filling properties, setting behaviour in joint, washability (removability) and strength. Finely textured, homogeneous joint finish. For use in dry and wet spaces, commercial and industrial facilities, and swimming pools. Also suitable for floor heating systems.

ted t es
E N 13 8
88
CG1
Special grout for drinking water containers available upon request:Sopro FTW 533 (grey 15)
Order no. 535 grey

Packaging Bag 25 kg Bag 5 kg (grey)
Col. no. 15
Order no. Col. no. 530 concrete grey 14 (contains trass)

Packages per pallet 40 200 Pallet weight 1,000 kg 1,000 kg
33
Tile grouts
DI DI
Tile grouts
Tile grouts
Sopro FL exible tile grout:
Ready to brave the elements.

s Te
ted to
enish Rh
CG2 WA
88
Flexible Frost-resistant
Trass
or
Contains Rhenish trass Good workability;
no moisture migration problems For fully vitried stoneware, natural and cast stone coverings For use on balconies, patios and in conjunction with oor heatings 2 20 mm joint widths
DI
E N 13 8
i g i n al
34 Tile fixing
products
Tile grouts
Product description
Sopro FL
Flexible tile grout 2 20 mm joints
ted to
Flexible, trass-bearing, cementitious tile grout, meeting CG2 WA requirements to DIN EN 13 888, for grouting ceramic, fully vitrified stoneware, natural and cast stone coverings, and glass block assemblies. Rapid set for low-suction tiles, with specially tailored joint-filling properties and first-rate washability (removability). Particularly suitable for balconies, patios and floor heating systems.

s Te
CG2 WA
N
E N 13 8
88
2 20 mm joint widths Working life: 30 40 minutes For indoor and outdoor use For walls and floors Flexible Low-chromate to Regulation 1907/2006 EC, Annex XVII

enish Rh
Trass
or
i g i n al
Standard colours: Order no. 528 silver grey 526 grey 622 stonegrey Sanitary colours: Order no. 624 jurabeige 626 anthracite
Col. no. 17 15 22
Order no. Col. no. 529 concrete grey 14 627 sandgrey 18
Col. no. 33 66
Order no. 628 black
Col. no. 90
Sopro FL grouting colours*

silver grey 17 grey 15 stone grey 22 concrete grey 14
sandgrey 18 jurabeige 33 anthracite 66 black 90
* Except colours anthracite and black
** Only colours anthracite and black
35
Tile grouts
DI
Tile grouts
Product description
Tile grouts
SoproDur HF 8
s Te
ted to
High-strength, rapid-set, trass-bearing, cementitious tile grout, meeting CG2 WA requirements to DIN EN 13 888, for extra-heavyduty applications. High mechanical strength and abrasion resistance through use of Mikrodur microcement. For grouting stoneware, fully vitrified stoneware, natural and cast stone coverings. Fine, smooth surface makes it particularly suitable for grouting glass and porcelain mosaic or tesserae. As alternative to reaction resin mortars for swimming pools.

CG2 WA
N
E N 13 8
enish Rh
88
2 8 mm joint widths Working life: 25 35 minutes For walls and floors, indoors and outdoors High strength Resistant to frost and de-icing salts Highly resistant to steam jet cleaning With ship approval Low-chromate to Regulation 1907/2006 EC, Annex XVII
DI
Trass
or
Test certificates Available upon request Please consult resistance table!
i g i n al
Order no. 591 white 556 silver grey
Col. no. 10 17
Order no. 592 grey
Col. no. 15
Packaging Bag 25 kg
SoproDur HF grouting colours*

white 10 silver grey 17 grey 15 concrete grey 14
36 Tile fixing
products
Tile grouts
Product description
SoproDur HF 30
s Te
ted to
CG2 WA
N
E N 13 8
88
High-strength, rapid-set, trass-bearing, cementitious tile grout, meeting CG2 WA requirements to DIN EN 13 888, for extra-heavyduty applications. High mechanical strength and abrasion resistance through use of Mikrodur microcement. For grouting stoneware, fully vitrified stoneware, natural and cast stone coverings. Particularly suitable for joints subject to high mechanical loads in workshops, washing facilities, catering kitchens and industrial facilities; as alternative to reaction resin mortars.

enish Rh
Trass
or
3 30 mm joint widths Working life: 25 35 minutes For walls and floors, indoors and outdoors High strength Resistant to frost and de-icing salts Highly resistant to steam jet cleaning Low-chromate to Regulation 1907/2006 EC, Annex XVII
i g i n al
Test certificates Available upon request Please consult resistance table!
Order no. 554 grey

Packaging Bag 25 kg
Col. no. 15
Order no. Col. no. 557 concrete grey 14

Packages per pallet 40 Pallet weight 1,000 kg
Sopro TNF
Natural stone grout with trass 5 40 mm joints
ted to
s Te
Rapid-set, trass-bearing, cementitious paving grout for grouting natural stone units and pavings in gardens and landscaped areas, and light- to medium-duty vehicular pavements. Also suitable for grouting coverings on balconies and patios with wider joints and rustic surface textures or for polygonal (crazypattern) tiling. With Rhenish trass and special protection to reduce risk of efflorescence. Also suitable for use in conjunction with floor heating. Particularly for coverings laid in crazy pattern Resistant to suction sweeper loads Suitable for high-pressure water jetting Frost- and dew-resistant Early walkability and loadability Low-chromate to Regulation 1907/2006 EC, Annex XVII
CG2 WA
N
88
E N 13 8
enish Rh
Trass
or
i g i n al
Order no. Col. no. 674 grey 15 675 pavement grey 13 677 sandgrey 18
Packaging Bag 25 kg
Order no. 684 beige 676 anthracite
Col. no. 32 NEW 66
Sopro TNF grouting colours*
grey 15
pavement grey 13
sandgrey 18
beige 32
anthracite 66
37
Tile grouts
DI
DI
Tile grouts
Product description
Tile grouts
Sopro Saphir M
Water-repellent marble grout 1 5 mm joints
Flexible, water- and dirt-repellent, rapid-set, trass-bearing, cementitious tile grout, meeting CG1 requirements to DIN EN 13 888, for discoloration-free grouting of natural stone units, e.g. granite and marble. Specially for use with sensitive, light-coloured, crystalline marble. Particularly suitable for use in conjunction with floor heating.

ted t es
E N 13 8
88
CG1
1 5 mm joint widths Working life: approx. 30 minutes For indoor and outdoor use For walls and floors Flexible Water- and dirt-repellent Trass-bearing Fine, smooth joint surface High colour fastness Low-chromate to Regulation 1907/2006 EC, Annex XVII
DI
enish Rh
Trass
or
i g i n al
Standard colours: Order no. Col. no. 980 white 10 981 silver grey 17
Packaging Bag 15 kg with handle (silver grey, grey) Bag 5 kg
Order no. 982 grey

Col. no. 15
Sanitary colours: Order no. 983 light beige 985 jurabeige
Col. no. 29 33
Order no. 986 anthracite 984 black
Col. no. 66 90
Packaging Bag 15 kg with handle (light beige) Bag 5 kg
Sopro Saphir M grouting colours*

white 10 silver grey 17 grey 15
light beige 29
jurabeige 33
anthracite 66
black 90
38 Tile fixing
products
Tile grouts
Tile grouts
The last word in decorative tile jointing

Two -component epoxy tile grout and adhesive Particulary suitable for glass mosaic 14 pre-pigmented decorative colours 42 colour variants Enhanced visual appeal through optional addition of gold and silver glitter For swimming pools and decorative bathrooms
Sopro Topas DFE designer epoxy tile grout
39
Tile grouts
Product description
Tile grouts
Sopro Topas DFE

Designer epoxy tile grout Components A + B
DI
E N 13 8
R2 RG
EN 120
Decorative, colour, two-component epoxy grout and adhesive, meeting RG requirements to DIN EN 13888 and R2 requirements to DIN EN 12004. Particularly suitable for glass mosaic subject to mechanical and chemical loads. Also used for chemical-resistant installation of coverings on all normal, strong substrates (please consult resistance table!). For bathrooms, showers, saunas and swimming pools. For decorative bonding and grouting of glass mosaic, offering high aesthetic appeal.

Particularly suitable for glass mosaic For bonding and grouting Joint widths up to 7 mm Working life approx. 45 minutes 14 pre-pigmented decorative colours 42 colour variants Enhanced visual appeal through optional addition of gold and silver glitter For swimming pools and decorative bathrooms For indoor and outdoor use
88
04
Coverage: for mosaic: as grout approx. 2,0 kg/m; as adhesive 2,0 4,0 kg/m
Sopro Glitter
Glitter
Consumption: Recommendation: max. 1 bag (200 g) per 3 kg Sopro Topas DFE
40 Tile fixing
products
also application matrix for tile grouts Protect from frost during transportation and storage. See on pages 50 51.
DI
Gold and silver glitter can be added to Sopro Topas DFE to achieve special effects and enhance visual appeal. Order no. 1000 neutral 1001 pearl white 1002 silk grey 1003 flannel 1004 slate grey 1005 latte macchiato 1006 sahara beige 1007 chocolate brown Col. no. 700 799 702 728 770 729 741 731 Order no. 1008 sky blue 1009 ocean blue 1010 gold 1011 ros 1012 orange 1013 fire red Col. no. 730 740 760 716 737 750
Packaging Bucket 3 kg (Component A 2,7 kg + Component B 0,3 kg)
Metallic colour glitter for addition to Sopro Topas DFE designer epoxy tile grout or Sopro DF 10 to achieve shiny metallic effect.
Order no. 1019 gold
Order no. 1020 silver
Packaging Bag 100 g (Nr. 10 in box)
Tile grouts
Tile grouts
Topas DFE ocean blue with Sopro Glitter silver
Sopro Topas DFE grouting colours*

The impact of all colours can be enhanced using Sopro Glitter in gold or silver! neutral 700 pearl white 799 silk grey 702 flannel 728
slate grey 770
latte macchiato 729
saharabeige 741
chocolate brown 731
sky blue 730
ocean blue 740
gold 760
ros 716
orange 737
fire red 750
glitter gold
glitter silver
41
Tile grouts
Product description
Tile grouts
Sopro FEP
Epoxy tile grout, Components A + B
DI
E N 13 8
R2T RG
EN 120
Two-component epoxy tile grout, meeting RG requirements to DIN EN 13 888, for grouting ceramic tiles in areas exposed to aggressive waters, chemicals and acids (please consult resistance table!), natural fats, high compressive loads and washing-out action. For bonding and grouting of glass and porcelain mosaic or tesserae with same colour. Also for regrouting washed-out, solidsurface cementitious joints on refurbishment/renovation contracts. For balconies and patios, commercial and industrial facilities, laboratories, catering kitchens and swimming pools (thermal baths).

88
04
1.5 12 mm joint widths Working life: approx. 50 minutes For indoor and outdoor use High mechanical resistance For laying and grouting glass mosaic, glass tiles and ceramic tiles With ship approval For walls and floors
Coverage: 2.0 kg/m for 11.5 24 cm tiles and approx. 10 mm joint width
DI
Standard colours: Order no. Col. no. 501 white 10 504 silver grey 17 Sanitary colour: Order no. 502 anthracite Col. no. 66
Order no. 508 grey
Col. no. 15
Packaging Bucket 5 kg (Component A 3.75 kg + component B 1.25 kg)
Sopro FEP and Sopro FEP grouting colours* 42 Tile fixing

products
white 10
silver grey 17
grey 15
anthracite 66
Tile grouts
Product description
Sopro FEP
Three-component epoxy tile grout, Special types
EN 120
DI
E N 13 8
R2T RG
Heavy-duty, three-component epoxy tile grout meeting RG requirements to DIN EN 13 888. Resin, curing agent and (0.06 0.2 mm graded) Sopro KQS 607 crystal quartz sand are mixed on site. For grouting ceramic tiles in areas exposed to aggressive waters, chemicals and acids (please consult resistance table!), natural fats, high compressive loads and washing-out action. Specially proportioned resin, curing agent and Sopro KQS 607 mixes are used for regrouting washed-out, solid-surface cementitious joints on refurbishment/renovation contracts and for grouting vibrated floors. For balconies and patios, commercial and industrial facilities, laboratories, catering kitchens and swimming pools (thermal baths). Particularly suitable for machine grouting. For same-colour bonding and grouting of glass and porcelain mosaic or tesserae.

88
2 12 mm joint widths Working life: approx. 40 minutes For indoor and outdoor use High mechanical resistance For laying and grouting glass mosaic, glass tiles and ceramic tiles For walls and floors
Test certificates Available upon request Order no. 604 grey

Packaging
Col. no. 15
Packages per pallet Pallet weight
Coverage: 2.0 kg/m for 11.5 24 cm tiles and approx. 10 mm joint width
Packaging comprises 4 5.5 kg: Component A (sold in boxed form): 4 Buckets 2.25 kg Component B (sold in boxed form): 4 Buckets 3.25 kg
120 120
270 kg 390 kg
Sopro EAH 547

Epoxy cleaning aid
Simplifies washing down and smoothing of epoxy-grouted joints as well as tool cleaning.

For indoor and outdoor use Concentrate For admixing with wash water Reduces film formation on tiles
Coverage: 50 100 ml per 10 ltr water
Packaging Bottle 1 ltr (Nr 12 in box)
Sopro ESE 548

Epoxy film remover
For removal of surface-dried or hardened epoxy resin film from tiling. Epoxy resin residue (film) can still be cleaned off days after application.

For indoor and outdoor use Concentrate For removal of film from smooth and slip-resistant tile coverings For later cleaning of epoxy resin-grouted coverings
43
Tile grouts
04
DI
Tile grouts
Product description
Tile grouts
Sopro ELD 458

Conductive dispersion
Liquid dispersion used to prepare static-dissipating, hydraulically setting, thin-bed tile adhesives and tile grouts. For static dissipation in: operating theatres, computer rooms and offices power stations, chemical plants production and storage facilities subject to explosion hazards Test certificates Available upon request
Coverage: 1.25 3.75 kg for 25 kg dry mortar
Packaging Canister 3.75 kg
Sopro FUF
Colour coating for tile grouts
Easily workable pure-acrylic-based grout coating for durable colouring of old, stained cementitious tile joints. Weather-resistant to DIN 18 363, water- and dirt repellent.

For indoor and outdoor use High coverage High mechanical resistance For walls and floors Ready-to-use
Order no. 950 white 951 silver grey
Col. no. 10 17
Order no. 952 grey 953 anthracite
Col. no. 15 66
Other colours upon request.
Coverage: approx. 20 m for 15 15 cm tiles and 3 5 mm joint widths
Packaging Bottle 0.3 ltr (Nr 10 in box), incl. sponge
FUF grouting colours*

white 10 silver grey 17 grey 15 anthracite 66
44 Tile fixing
products
Tile grouts
Product description
Sopro Sanitary Silicone

prevents mould attack
Elastic, oxime-free silicone sealant for filling and sealing of perimeter and movement joints in sanitary, living and commercial spaces.

For indoor and outdoor use Acetic-curing With fungicidal and fungistatic properties to DIN EN ISO 846 Oxime-free Resistant to weathering, ageing and UV radiation Excellent smoothing properties Suitable for underwater applications (with Sopro Primer UW 025) Col. no. 00 10 16 17 Col. no. 77 28 29 32 33 27 34 Col. no. 98 91 Order no. 051 grau 035 stone grey 038 concrete grey 034 sandgrey Order no. 063 anemone 057 caramel 065 brown 031 chestnut 056 balibrown 060 anthracite 061 black Order no. 733 wine red
Standard colours: Order no. 052 transparent 050 white 037 light grey 036 silver grey Sanitary colours: Order no. 033 manhattan 062 jasmin 054 light beige 058 beige 032 jurabeige 055 parchment 053 bahamabeige Intensivfarben: Order no. 734 deep blue 732 signal red Coverage: 310 ml for 3.1 m joint (10 10 mm)
Packaging
Col. no. 15 22 14 18 Col. no. 35 38 52 50 59 66 90 Col. no. 92

Pallet weight
Cartridge 310 ml (Nr 12 in box)
approx. 330 kg
Silicon colours*
transparent 00 white 10 light grey 16
silver grey 17
grey 15
stone grey 22
concrete grey 14
sandgrey 18
manhattan 77
jasmin 28
light beige 29
beige 32
jurabeige 33
parchment 27
bahamabeige 34
anemone 35
caramel 38
brown 52
chestnut 50
balibrown 59
anthracite 66
black 90
deep blue 98
signal red 91
wine red 92
45
Tile grouts
Tile grouts
Product description
Tile grouts
Sopro Ceramic Silicone
Elastic, oxime-free silicone sealant for filling of perimeter and movement joints in ceramic coverings in sanitary, living and commercial spaces.

prevents mould attack
For indoor and outdoor use Acetic-curing With fungicidal and fungistatic properties to DIN EN ISO 846 Oxime-free
Standard colours: Order no. 782 transparent 780 white 784 light grey 783 silver grey* Sanitary colours: Order no. 788 manhattan 787 jasmin 788 light beige 786 beige 881 jurabeige 789 parchment
Packaging
Col. no. 00 10 16 17 Col. no. 77 28 29 32 33 27
Order no. 781 grey* 877 stonegrey 785 concrete grey 889 sandgrey Order no. 775 bahamabeige 882 brown 883 chestnut 884 balibrown 773 anthracite 886 black
Packages per pallet 1,080 600
Col. no. 15 22 14 22 Col. no. 34 52 50 59 66 90

Pallet weight
Coverage: 310 ml for 3.1 m joint (10 10 mm)
Cartridge 310 ml (Nr 12 in box) Aluminium sausage* 580 ml (Nr 20 in box)
approx. 330 kg approx. 343 kg
Sopro Marble Silicone
Elastic, oxime-free silicone sealant for filling of perimeter and movement joints in natural stone coverings.

For indoor and outdoor use For all types of natural stone Good adhesion to joint faces No migration staining around edges No priming required Oxime-free
Standard colours: Order no. 790 transparent 791 white 792 silver grey Sanitary colours: Order no. 796 light beige 794 jurabeige
Col. no. 00 10 17 Col. no. 29 33
Order no. 793 grey 799 concrete grey 795 sandgrey Order no. 798 anthracite 797 black
Col. no. 15 14 18 Col. no. 66 90
Packaging Cartridge 310 ml (Nr 12 in box)
46 Tile fixing
products
Tile grouts
Product description
NEW
Sopro PUD 682

Polyurethane sealant
Highly elastic, rapid-set, solvent-free polyurethane sealant for filling horizontal and vertical expansion and construction joints. For concrete wall and floor surfaces, pavements and heavy-duty areas, e. g. car parks, supermarkets, warehouses etc. Suitable for producing flexible joints at junctions between similar and different types of material, e.g. ceramic tiles, metal units, stone, brick etc. Product cures through action of humidity to produce elastic seal. For application using industry-standard spray guns for sausages.

For walls and floors For indoor and outdoor use Sag-resistant High long-term elasticity High weather resistance Bonds excellently with wide variety of materials Also suitable for wider joints Ready-to-use Excellent workability Bubble-free curing Tack-free surface Overcoatable Colour: grey
Coverage: 840 g for 6 m joint length (10 10 mm)
Packaging 840 g aluminium sausage (Nr 20 in box)
Sopro Primer
Bonding primer for various substrates for use in conjunction with Sopro silicone and SoproDur HF-D 817.
For indoor and outdoor use masonry, natural stone units underwater applications, swimming pools, absorbent substrates
P 4050: UW 025:
Please observe guidelines on primers in technical product infomation for Sopro silicone sealants and SoproDur HF-D 817.
Packaging
Coverage: approx. 5 ml/m joint for 10 mm joint depth
021 Primer P 4050 Aluminium bottle 100 ml (Nr 15 in box) 025 Primer UW 025 Aluminium bottle 250 ml (Nr 15 in box)
47
Tile grouts
Tile grouts
Product description
Tile grouts
SoproDur HF-D 817
Elastic, oxime-free, chemical-resistant sealant for sealing floor and perimeter joints exposed to high mechanical and chemical loads in warehouses, factory halls, workshops, washing facilities, catering kitchens and yard areas.

For outdoor use High temperature resistance up to +265 C Excellent chemical, ageing, UV and weathering resistance Amenable to high-pressure cleaning Oxime-free Colour: grey 15
Coverage: 310 ml fr 3,1 m Fuge (10 10 mm)
Sopro DA 049
Acrylic sealant
Gunnable, acrylic dispersion-based sealant for plasto-elastic filling of perimeter joints between absorbent materials, e. g. concrete, masonry, plasterwork, timber, ceramics etc.

For indoor and outdoor use Overcoatable Colour: white 10
Sopro GM 026
Smoothing agent
Smoothing agent for clean and easy smoothing of silicone and acrylic Sopro sealants.

Environmentally compatible Biodegradable Sold in convenient spray bottle
Coverage: approx. 20 ml per metre joint
Packaging Spray bottle 1 ltr (Nr 10 in box)
48 Tile fixing
products
Sopro tile grout coverage chart

Tile grouts
Table 1
Ceramic (format) in cm 10 10 10 15 10 20 11,5 24 (split tiles) 15 15 15 20 20 20 20 30 25 25 30 30 30 60 40 40 50 50 Joint length m/m 19,5 16,2 14,5 12,5 13,4 11,5 9,9 8,2 7,9 6,6 5,0 5,0 4,0
How to determine grout requirement

Table 1 First identify appropriate size in Ceramic tile size column. Read off joint length per m2 from second column. Table 2 Select required joint width from rst column and joint depth from top row. Read off relevant coverage rate at intersection of selected column and row and multiply this by joint length value from Table 1. The product of the two values indicates the tile grout requirement per m2. Calculated example: Ceramic tile size: Joint width: Joint depth: 10 20 cm 4 mm 8 mm Joint length: Coverage rate: 14.5 m/m 48
Tile grout requirement: 14.5 48 = 696 g/m
You may also wish to use the tile grout coverage calculator on our website at
www.sopro.com
or in the Sopro App!
Table 2
Joint width (mm) 5 6 7 8 9 Joint depth (mm) 10 11 12 13 14 15
Coverage factor (grammes) 2 3 4 5 6 7 8 9 10 11 12 15 22,5 30 37,5 45 52,5 60 67,5 75 82,5 90 18 27 36 45 54 63 72 81 90 99 108 21 31,5 42 52,5 63 73,5 84 94,5 105 115,5 126 24 36 48 60 72 84 96 108 120 132 144 27 40,5 54 67,5 81 94,5 108 121,5 135 148,5 162 30 45 60 75 90 105 120 135 150 165 180 33 49,5 66 82,5 99 115,5 132 148,5 165 181,5 198 36 54 72 90 108 126 144 162 180 198 216 39 58,5 78 97,5 117 136,5 156 175,5 195 214,5 234 42 63 84 105 126 147 168 189 210 231 252 45 67,5 90 112,5 135 157,5 180 202,5 225 247,5 270
This table presents approximate, practice-based values that may vary upwards or downwards. These gures shall therefore not be used as the unqualied basis for price calculations and Sopro Bauchemie GmbH shall accept no liability in this connection. For larger contracts, trial laying of a sample area is recommended to determine coverage.
49
Tile grouts
Tile grouts
Sopro DF 10 Designer tile grout
Sopro Saphir 5 Water-repellent tile grout
Sopro Brillant Water-repellent tile grout
Sopro MFs Tile grout
Sopro MFs + b Tile grout
Sopro MFb Tile grout
Joint width
1 10 mm
1 5 mm
1 10 mm
2 5 mm
3 12 mm
5 20 mm
Covering type
Absorbent ceramics (earthenware tiles) Stoneware, extruded tiles (split tiles) Fully vitried stoneware Natural stone (discoloration-resistant) Natural stone (discoloration-sensitive) Cast stone
ll ll ll ll ll ll l ll
ll l
l ll ll ll ll ll l ll
ll l
l ll l l
l ll l l
l ll l
l ll
concrete grey 14 (contains trass)
Terracotta Glass and porcelain mosaic, tesserae, glass tiles, glass blocks
l
only glass blocks
Application
Living areas, damp spaces Outdoors (facades, balconies, patios) Swimming pools/ underwater applications Heavy duty (e. g. commercial or industrial facilities) Heated substrates, e. g. with oor heating Resistance against acidic cleaners used in private households
ll ll l l ll ll
ll
ll l l l ll l
ll
ll l l l l l
ll l l l l l
ll l
l l
50 Tile fixing
products
recommended
Application matrix for tile grouts

Tile grouts
Sopro FL Flexible tile grout
SoproDur HF 8 Tile grout
SoproDur HF 30 Tile grout
Sopro TNF Natural stone grout with trass
Sopro Saphir M Water-repellent marble grout
Sopro DFE Epoxy tile grout
Sopro FEP epoxy tile grout
Sopro FEP 604 Three-component epoxy tile-grout, Special types 2 12 mm
2 20 mm
2 8 mm
3 30 mm
5 40 mm
1 5 mm
1 7 mm
1,5 12 mm
l ll ll ll l ll l l
only glass blocks
l ll ll ll l l l ll
l l l ll ll ll l ll
ll ll ll
ll ll ll
ll ll ll
ll ll ll l ll l l
l l ll l ll ll ll
only glass blocks
ll
ll
ll
ll ll l l ll l
l ll ll ll l ll
l ll ll ll l ll
l ll l l l l
ll l
ll l ll ll l ll
ll l ll ll l ll
l l ll ll l ll
ll l
suitable
not suitable
51
Surface fillers
Sopro FS 15 plus oor-levelling compound:

Surface fillers
For all thicknesses between 2 and 40 mm.

Optimum ow qualities by Superplasticizer (high performance liqueer) Unbroken surface achievable with successive pours due to long open time Incorporating Mikrodur microcement For all coat thicknesses between 2 and 40 mm Ready to receive ceramic covering after only 2 3 hours
CT-C35-F9
N
E N 13 8
es
ted t
52 Tile fixing
products
13
DI
Surface fillers
Self-levelling fillers
mm 5 10 15 20 25 30 35 40 45 50 55
self-levelling
60
65
70
75
80
Surface fillers
0,5 5 mm
Sopro FS 5
as skim coat for elastic coverings and parquet flooring
2 40 mm
Sopro FS 15 plus
excellent flow properties combined with high reliability for thin coat thicknesses due to polymer modification; universal surface filler for thick and thin coats
20 70 mm*
Rapidur FE
Self-levelling screed
Special self-levelling fillers

mm 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80
4 40 mm
Sopro HF-S
heavy-duty, flow-applied floor-levelling compound used to produce finished floor surfaces
1 30 mm
Sopro AFS 561
flow-applied, alpha-hemihydrate-based surface filler used to level out calcium sulphate-based and mastic asphalt screeds
3 25 mm
Sopro FAS 551
lightweight flow-applied surface filler for high coat thicknesses
See also product description on page 52
53
Surface fillers
Product description
self-levelling
Sopro FS 5
Floor-levelling compound Order no. 549
Surface fillers
CT-C25-F7
N
13
es
ted t
Cementitious, self-levelling, rapid-set, pourable filler compound for thin-coat application to produce particularly smooth surfaces and as skim coat to fill pores, hairline cracks etc. Ideal as base for textile, elastic and parquet flooring. Castor chair resistant when applied with min. 2 mm coat thickness. Suitable for floor heating systems. Excellent workability and hardened mortar properties thanks to Mikrodur technology. Optimum flow qualities by Superplasticizer (high performance liquefier).

EN 1
38
Coat thickness: 0.5 5 mm For floors For indoor use Compressive strength after 28 days: approx. 25 N/mm Flexural tensile strenght after 28 days: approx. 7 N/mm Working life: 30 40 minutes Walkable: after 2 3 hours Adapted perimeter insulation stripe on page 81 Low-chromate to Regulation 1907/2006 EC, Annex XVII
HI G
TE
R BIN D
Sopro FS 15 plus
T
ted t
+23
C/
e 0 % r l. h u
After
E N 13 8
13
it y
/5
0%
u rel. h
id
HI G
TE
R BIN D
DI
+2
C
YS CR TAL
LI
NE
CT-C35-F9
DI
id
Packaging Bag 25 kg
es
Pumpable, self-levelling, rapid-set, cementitious universal surface filler with excellent flow properties. Applied in thin coats upwards of 2 mm to level mineral substrates and produce smooth, plane, unbroken subfloor surfaces. Used as base for all types of floor covering, e.g. ceramic, natural stone, textile, elastic and parquet flooring. Suitable for floor heating systems. Excellent workability and hardened mortar properties thanks to Mikrodur technology. Optimum flow qualities by Superplasticizer (high performance liquefier).

hrs. ready to receive ceramic covering
23
Coat thickness: 2 40 mm For floors For indoor use Compressive strength after 28 days: approx. 35 N/mm Flexural tensile strenght after 28 days: approx. 9 N/mm Working life: 30 40 minutes Walkable: after 2 3 hours Ready to receive ceramic covering: after 2 3 hours Adapted perimeter insulation stripe on page 81 Low-chromate to Regulation 1907/2006 EC, Annex XVII
it y
YS CR TAL
LI
NE
54 Tile fixing
products
Surface fillers
Product description
self-levelling
NEW
Rapidur FE 678
es
ted t
CT-C25-F5
N
EN 1
38
13
YS CR TAL
LI
NE
TE
R BIN
DI
Ready for tiling: after approx. 24 hours Self-levelling Coat thickness for bonded screeds: 20 70 mm Coat thickness for unbonded screeds: 35 70 mm Coat thickness for unsulation: 40 70 mm For indoor use Working life: 60 90 minutes Walkable: after 3 4 hours Ideal for renovation and refurbishment Suitable for floor heating systems Pumpable Adapted perimeter insulation stripe on page 81 Low-chromate to Regulation 1907/2006 EC, Annex XVII
HI G
Coverage: approx. 22 kg/m per cm screed thickness; approx. 2,200 kg/m finished screed
Packaging Bag 25 kg
Containers per pallet 40
Sopro HF-S 563

Floor-levelling compound
es
ted t
CT-C40-F10
N
13
Heavy-duty, pumpable, flow-applied, rapid-set, cementitious floorlevelling compound used to produce finished floor surfaces, e. g. for workshops, factory halls, warehouses/storerooms particularly for trafficking by industrial and fork-lift trucks garages, cellars etc. Also suitable as base for heavy-duty tile and natural stone coverings. Featuring Mikrodur technology for exceptionally high strengths. Outdoors, Sopro HF-S 563 may be finished with Sopro HF-L 513 to improve surface properties. Optimum flow qualities by Superplasticizer (high performance liquefier).

E N 13 8
YS CR TAL
LI
NE
TE
R BIN D
Coat thickness: 4 40 mm, for thickness upwards of 10 mm may be extended with sand, e. g. graded 0 2 mm or 0 8 mm For floors For indoor and outdoor use Compressive strength after 28 days: approx. 40 N/mm Flexural tensile strenght after 28 days: approx. 10 N/mm Working life: 30 40 minutes Walkable: after 2 3 hours Ready to receive floor covering: as finished floor surface: after 24 hours per centimetre coat thickness; for subsequent tiling: after 12 hours Adapted perimeter insulation stripe on page 81 Low-chromate to Regulation 1907/2006 EC, Annex XVII
HI G
Packaging Bag 25 kg
55
Surface fillers
Polymer-modified, ready-to-use dry mix for production of rapidset screeds screeds allowing early flooring installation. Grade CT-C25-F5 to DIN EN 13 813. Suitable for heated screeds, bonded screeds and unbonded screeds (on separating or insulation layer). Used as base for all types of floor covering, e. g. ceramic, natural stone, textile and elastic flooring. Particularly useful for fast-track or tightly scheduled screed laying.
T
W
DI
A
DI
W
Surface fillers
Product description
self-levelling
Sopro AFS 561

Anhydrite floor-levelling compound
Surface fillers
es
ted t
White, pumpable, flow-applied, self-levelling, rapid-set, alphahemihydrate-based filler used to level out gypsum-based/calcium sulphate-based (anhydrite and self-levelling anhydrite) screeds and board subfloors and to produce smooth, level, unbroken surfaces for subsequent laying of all kinds of flooring, e.g. ceramic, natural stone, textile and elastic coverings. Also for use on mastic asphalt. Suitable for floor heating systems. Optimum flow qualities by Superplasticizer (high performance liquefier).

CA-C25-F7
N
E N 13 8
13
Coat thickness: 1 30 mm, for thickness upwards of 10 mm may be extended with (e. g. 0 2 mm graded) sand For floors For indoor use Compressive strength after 28 days: approx. 25 N/mm Flexural tensile strenght after 28 days: approx. 7 N/mm Working life: approx. 40 minutes Walkable: after approx. 3 hours Adapted perimeter insulation stripe on page 81 Shrinkage-free
Sopro FAS 551

Fibre-reinforced self-levelling filler
13
HI G
TE
R BIN D
DI
Packaging Bag 25 kg
Flexible, flow-applied, self-levelling, rapid-set, cementitious, fibrereinforced surface filler used to even out irregularities in timber and mineral substrates, especially on refurbishment/renovation contracts.

ted t es
CT-C30-F7
DI
W
E N 13 8
Coat thickness: 3 25 mm, for thickness upwards of 10 mm must be extended with (e. g. 0 2 mm graded) sand For floors For indoor use Compressive strength after 28 days: approx. 30 N/mm Flexural tensile strenght after 28 days: approx. 7 N/mm Flexible Working life: 2 30 minutes Walkable: after approx. 2 hours With ship approval Adapted perimeter insulation stripe on page 81 Low-chromate to Regulation 1907/2006 EC, Annex XVII
YS CR TAL
LI
NE
o
I
Packaging Bag 25 kg
56 Tile fixing
products
Surface fillers
N EW
Sopro RAM 3 renovation and levelling mortar
Ready for tiling after only 2 hours
For levelling, patching and rendering Allows tiling after only 2 hours 3 30 mm For walls and oors
57
Surface fillers
Surface fillers
Product description
stable
NEW
Surface fillers
Sopro RAM 3
Renovation and levelling mortar
Ready for ceramic tiling after only
Universal, sag-resistant, rapid-set, cementitious render and surface filler for smoothing, patching and rendering of wall and floor surfaces. For application to mineral substrates, e. g. concrete, aerated concrete and masonry. Excellent workability and mouldability. Ideal for renovation and refurbishment. Ready for tiling after only 2 hours. Suitable for use in damp and wet spaces, and on balconies and patios. Mortars rapid strength development allows early removal of uneven patches in filler coat using plasterers lattice plane.

2 hours!
Coat thickness: 3 30 mm For walls, floors and ceilings For indoor and outdoor use Working life: approx. 20 minutes Walkable: after approx. 1.5 hours Ready for tiling: after approx. 2 hours Meets DIN EN 998-1 requirements, strength class CS IV Low-chromate to Regulation 1907/2006 EC, Annex XVII
Sopro AMT 468

Levelling mortar with trass
Universal, light-grey, sag-resistant, rapid-set, cementitious surface filler applied to walls and floors for patching and smoothing concrete, plasterwork, masonry and screed surfaces. Particularly suitable for application as levelling plaster/render and as levelling coat to provide falls in damp and wet spaces or on balconies, patios and steps/stairways.

enish Rh
Trass
or
igin
al
Coat thickness: 2 30 mm For walls and floors For indoor and outdoor use Trass-bearing Working life: approx. 45 minutes Walkable: after approx. 6 hours Ready to receive floor covering: after approx. 12 hours Low-chromate to Regulation 1907/2006 EC, Annex XVII
Packaging Bag 25 kg
58 Tile fixing
products
Surface fillers
Product description
stable
Sopro SP 466
Lightweight levelling mortar
enish Rh
Trass
or
igin
al
Coat thickness: 2 30 mm Flexible For walls and floors For indoor and outdoor use Trass-bearing Working life: approx. 30 minutes Walkable: after approx. 2 hours Ready to receive floor covering: after approx. 2 hours Low-chromate to Regulation 1907/2006 EC, Annex XVII
Sopro SP 770
Rapid-set filler
Grey, high-strength, sag-resistant, rapid-set, cementitious surface filler. Universal use for filling and patching deep irregularities, holes and cracks in concrete and screeds. For all patching repairs on refurbishment/renovation contracts. For greater coat thicknesses upwards of 10 mm may be extended with (e. g. 0 2 mm graded) sand by up to approx. 1/3 of compound volume.

Coat thickness: 2 30 mm For walls, floors and ceilings For indoor use Not suitable for permanent wet areas Working life: 15 20 minutes Ready to receive floor covering: after approx. 1 hour Compressive strength 40 N/mm2 Low-chromate to Regulation 1907/2006 EC, Annex XVII
Packaging Bag 25 kg
59
Surface fillers
Grey, sag-resistant, rapid-set, cementitious, polymer-modified universal surface filler incorporating lightweight aggregate. Used as rapid-set filler for patching and smoothing concrete, masonry and plastered/rendered wall surfaces. Also suitable as surface gradient filler to provide falls and on heated floor areas. Ideal for rapid progress on refurbishment/renovation schemes. Particularly straightforward application.
Surface fillers
Product description
stable
Sopro RS 462
Repair filler
Surface fillers
Grey, sag-resistant, rapid-set, cementitious surface filler for smoothing, patching, levelling and repairing concrete, plasterwork, masonry and screed surfaces.
Coat thickness: 1 10 mm, may be extended for larger coat thicknesses using (0 2 mm graded) sand and cement in proportions 1 : 1 : 1 For walls, floors and ceilings For indoor and outdoor use Working life: approx. 30 minutes Low-chromate to Regulation 1907/2006 EC, Annex XVII
Sopro SBP 474

Swimming pool render
ZD with B dat es PCC-mortar
in
gp
o ol con
st
uc
tio
without hydrated lime
Grey, sag-resistant, rapid-set, fibre-reinforced render and filler to DIN EN 998-1, Table 1, strength class CS IV, for rendering, patching and smoothing of wall, floor and ceiling surfaces in concrete, aerated concrete, pumice, clay, calcium-silicate and composite masonry. Particularly suitable as levelling plaster/render and surface gradient filler in swimming pools and similar water-retaining structures. Complies with ZDB (Federation of the German Construction Industry) data sheet Swimming pool construction Guidance on design and workmanship for ceramic coverings in swimming pools, July 2008.

t hee as
Com pl i
Coverage: approx. 1,5 kg/m per mm coat thickness
Sopro USW 941

Universal filler
Swi
Coat thickness: 3 30 mm Without hydrated lime/lime admixtures For walls, floors and ceilings For indoor and outdoor use For permanently underwater applications Working life: approx. 20 minutes Ready to receive covering: after approx. 4 hours Low-chromate to Regulation 1907/2006 EC, Annex XVII
Packaging Bag 25 kg
White, sag-resistant, rapid-set, cementitious filler for universal application to fill, patch, smooth, mould and model indoor and outdoor surfaces. Ideal for renovation and refurbishment contracts.

Coat thickness: 1 10 mm For walls, floors and ceilings For indoor and outdoor use Working life: approx. 30 minutes Low-chromate to Regulation 1907/2006 EC, Annex XVII
Packaging Bag 5 kg
60 Tile fixing
products
Surface fillers
Product description
Sopro SSP
Grinding filler for industrial application
Rapid-set, industrial surface filler for fast, efficient coating of natural and cast stone units. Particularly suitable for finishing stone units on grinding lines.

Order no. 463 grey 465 white

Packaging Bag 25 kg Packages per pallet 40 Pallet weight 1,000 kg
Coverage: depends on application
Soprodur
Microcement void filler Order no. 900
One-component, mineral microcement with special additives. For remedial filling of hollows and voids below tiling, fully vitrified stoneware, natural stone and vibrated floors. Consolidates porous bedding mortar. For application by impregnation, syringing or injection.

For indoor and outdoor use For consolidation of tile coverings by eliminating voids and hollows in beds Working life: approx. 60 minutes Low-chromate to Regulation 1907/2006 EC, Annex XVII
Please observe requirements relating to tools and equipment to be used for mixing and application.
Packaging
Pallet weight 450 kg 312 kg
Box 30 kg (6 5 kg bags) Bucket 6 kg (12 0.5 kg bags), incl. measuring beaker
Sopro GH 564
Casting resin
High-fluidity, rapid-set, two-component acrylic resin system for structural bonding of cracks in screeds. Extended with silica sand, used for filling joints and defective areas and for levelling out irregularities.

sc
10 with leats c d e e r
For indoor and outdoor use For floors Water-, weather- and chemical-resistant Pot life may be adjusted as required (depending on quantity of curing agent added): approx. 10 minutes where all curing agent added; approx. 20 minutes where 2/3 of curing agent added Loadable: after approx. 30 minutes
Coverage: approx. 1.0 kg/dm
Packaging Pot 0,75 kg (Nr 12 in box)
61
Surface fillers
For indoor and outdoor use Fine grinding possible after approx. 10 minutes
Primers and bonding agents

Product description
Sopro GD 749
Primer
Quick drying
approx. min
Light-blue, solvent-free, fast-drying, synthetic resin primer for high- or variable-suction substrates. For pretreatment of cement screeds, calcium sulphate-based screeds, board subfloors, gypsum plasterboard and gypsum fibreboard, lime/cement render and gypsum plasterwork. Water-thinnable for application to highsuction substrates. Use Sopro GD 749 primer only in concentrated form with gypsumbound substrates or where overcoated by Sopro flow-applied floor-levelling compound.

For indoor and outdoor use, walls and floors Suitable for floor heating systems Drying time: 10 minutes at +23 C
Packaging Barrel 200 kg Canister 25 kg Canister 10 kg Canister 5 kg Bottle 1 kg (Nr 12 in box)
Packages per pallet 24 60 90 384
Pallet weight 600 kg 600 kg 450 kg 384 kg
Coverage: 100 200 g/m undiluted
Sopro HPS 673

Bonding primer
Dark-grey, solvent-free polymer dispersion applied in thin coat as bonding layer to impervious, smooth and non-absorbent substrates prior to tilelaying. Also suitable as adhesion promoter on timber, mastic asphalt or magnesium oxychloride (magnesite) screeds and existing firmly adhering adhesive residue, lacquers/ varnishes and PVC coverings

for indoor and outdoor use
For indoor and outdoor use For walls and floors Drying time: 1 2 hours Suitable for floor heating systems With ship approval Solvent-free
Packaging
Coverage: approx. 150 g/m depending on nature of substrate
Bucket 10 kg Bucket 5 kg Bucket 3 kg Bottle 1 kg (Nr 10 in box)
62 Tile fixing
products

Product description
Sopro MGR 637

Multi-purpose primer
Extra-low-emission, quick-drying, one-component reaction resin primer. Particularly suitable for calcium sulphate-based (anhydrite) screeds when laying large-format fully vitrified stoneware units and for stabilizing all types of absorbent and non-absorbent substrate.

Coverage: approx. 175 g/m per coat
Sopro EPG 522

Epoxy primer
Solvent-free, unpigmented, two-component liquid epoxy resin. Applied as primer to stabilize friable mineral substrates and as adhesion promoter on smooth substrates, e.g. metal, mastic asphalt and existing coatings. Applied as primer prior to laying large format tiles on gypsum-bound substrates. Used to provide seal and prevent action in cementitious substrates, to fill cracks, to grout joints around channels and floor drains/gullies and in capillary-breaking joints. May be applied as epoxy mortar where extended with Sopro KQS 607 crystal quartz sand or Sopro QS 511 coarse silica sand. Resistant to water, sea water, wastewater/ sewage, alkaline solutions, diluted acids, salt solutions, mineral oils, fuels and lubricants. Used to seal capillaries in damp cementitious substrates to speed up laying of parquet, PVC etc. Please consult resistance table!

For walls and floors, indoors and outdoors Working life: approx. 30 minutes Ready to receive floor covering: after approx. 24 hours
Coverage: 300 500 g/m depending on nature of substrate
Packaging Bucket 10 kg Bucket 4 kg
63
For indoor and outdoor use Specifically for calcium-sulphate based screeds when laying large-format fully vitrified stoneware units Suitable for floor heating systems Ready to receive covering: after 30 40 minutes Water- and solvent-free GISCODE RU 1 solvent-free to TRGS 610

Product description
Sopro ESG 868

Epoxy primer sealer
Solvent-free, two-component epoxy resin barrier coat for substrate preparation, particularly suitable for application to freshly laid and/ or damp screeds. May be applied to oily concrete substrates where previously cleaned. Excels by excellent wetting and adhesive properties on damp concrete/screed substrates and reduces risk of osmotic blistering by providing barrier against rising damp. Resistant to water, sea water, wastewater/sewage, diluted acids, alkaline solutions, mineral oils, fuels and lubricants.

For floors Extra-hardwearing and chemical-resistant Working life: approx. 30 minutes For indoor and outdoor use
Now
p 2 com
onen
ts
Coverage: 2 coats je 0.6 0.9 kg/m each = 1.2 1.8 kg/m
Packaging Bucket 9 kg (combipackage) Bucket 18 kg (combipackage) Bucket 31,6 kg (component A) Bucket 4,4 kg (component B)
Sopro HE 449
Bonding emulsion
Polymer dispersion used as bonding layer for mineral surface fillers and plasters/renders (e. g. Sopro FS 15 plus and Sopro FS 30 maxi floor-levelling compounds). For wet-on-wet application. For modification of mortars, screeds and slurries.

For indoor and outdoor use Straightforward application Good bonding performance
Packaging
Coverage: 100 200 g/m as bonding layer
Bucket 10 kg Bucket 5 kg Pot 1 kg (Nr 12 in box)
Sopro MAS 418

Marble slurry
enish Rh
Trass
or
White, one-component, cementitious bonding and sealing slurry for laying of natural stone coverings. Provides reliable seal against migration of discolouring substances from thick-bed mortar or substrate. Improves adhesion between bedding mortar and covering. Sopro MAS 418 marble slurry is applied either to rear face of discoloration-prone natural stone units or for wet-on-wet application to pre-laid mortar bed.

i g i n al
For indoor and outdoor use Contains Rhenish trass Also suitable for use in conjunction with floor heating Low-chromate to Regulation 1907/2006 EC, Annex XVII
Coverage: 1.0 1.5 kg/m
Packaging Bag 20 kg
64 Tile fixing
products

Product description
Sopro HS 448
Bonding slurry with trass
enish Rh
Trass
or
Trass-bearing bonding and contact slurry for conventional tilelaying using thick-bed method. As bonding layer between concrete and screed for laying of (bonded) screed As bonding slurry for thick-bed laying between earth-moist mortar bed and tile or natural stone covering As bonding layer in conjunction with Sopro DM 610 drainage mortar or other porous screed types with single-size grading

Coverage: approx. 1.4 kg/m
Packaging Bag 25 kg
Sopro HSF 748

Flexible bonding slurry with trass
enish Rh
Trass
or
i g i n al
One-component, trass-bearing, high polymer-modified bonding and contact slurry for laying of natural or cast stone coverings and paving units. As flexible bonding slurry for installation of stone and ceramic coverings using vibrated floor system or conventional methods. Particularly suitable for laying of tiles with low water absorption (fully vitrified stoneware) As bonding layer applied to bedding mortar or substrate As bonding layer for separate (bonded) screeds As bonding layer in conjunction with Sopro DM 610 drainage mortar or other porous screed types with single-size grading For application in conjunction with Sopro TVM 858 thick-bed mortar with trass

For indoor and outdoor use Strong adhesion/bonding for installed coverings Particularly suitable for use in conjunction with floor heating Low-chromate to Regulation 1907/2006 EC, Annex XVII
Coverage: 1.0 1.5 kg/m for powder application; 1.5 2.0 kg/m for slurry application
Packaging Bag 25 kg
65
i g i n al

Application table for Sopro primers and bonding agents
For tile adhesives and leveller For leveller
Substrates
GD 749 primer
HPS 673 bonding primer
MGR 637 Multipurpose primer
EPG 522 Epoxy Primer (sanded)
HE 449 bonding emulsion* pure diluted
Cement screeds Anhydrite screeds Mastic asphalt screeds Plasters, P II P III Gypsum- and anhydrite plasters, P IV P V Absorbent concrete Non-absorbent concrete Old ceramic tiles Terrazzo coverings Natural stone/concrete stone Gypsum plasterboards Wooden substrates Old residues of carpet glue Firm lacquers Metal
l l l l l l
l l l l l l l l l l l l l l l l l l l l
l l l l l l l l l l l l l l l l l l l l
* For wet-on-wet substrate preparation (after short ev aporation time of approx. 10 15 minutes, max. 30 minutes) prior to application of Sopro surface fillers , excluding Sopro FS 5 floor-levelling compound and Sopro AFS 561 anhydrite floor-levelling compound. No liquid Sopro HE 449 bonding emulsion shall remain on surface. Films that have already dried shall be removed. For further details, please consult technical product information on Sopro HE 449 bonding emulsion.
66 Tile fixing
products
Waterproofings
Sopro TDS 823 turbo sealing slurry
Fasten your seatbelts.

MicroGumTechnology
Rapid-set Withstands 3 bar water pressure after only 6 hours Highly exible, crack-bridging after only 6 hours For showers and swimming pools For balconies and patios Particularly recommended during cold season For indoor and outdoor use
67
Waterproofings
Waterproofings
Product description
Sopro DSF 523

One-component flexible sealing slurry
Sopro Bauchemie GmbH
Flexible, one-component, cementitious sealing slurry used to produce crack-bridging waterproof coatings. Suitable for brushon waterproof coatings to balconies, patios and swimming pools. For refurbishment of solid, strong existing tile coverings on balconies and patios (tile-on-tile). For internal coating of process water tanks with max. 4 m water depth. Also suitable for providing waterproof barrier on masonry, concrete and plasterwork not subject to hydrostatic pressure from surface and seepage water. Ideal for waterproofing fountains and spring catchments.

Working life: approx. 2 hours Drying time: approx. 4 hours per coat For indoor and outdoor use For walls and floors For roller, spatula, brush and spray application Low-chromate to Regulation 1907/2006 EC, Annex XVII
Waterproofings
Sopro DSF 623

One-component flexible rapid-set sealing slurry
Flexible, quick-drying, one-component, cementitious sealing slurry used to produce crack-bridging waterproof coatings. Suitable for Moisture Exposure Classes A1, A2 and B to Construction Products List A issued by DIBT (German Institute for Construction Technology), and 0, A01, A02 and B0 to ZDB (Federation of the German Construction Industry) data sheet.

Use as Sopro DSF 523 one-component flexible sealing slurry Working life: approx. 50 minutes Quick-drying (approx. 2 hours per coat) For indoor and outdoor use For walls and floors For roller, spatula, brush and spray application Low-chromate to Regulation 1907/2006 EC, Annex XVII
68 Tile fixing
products
Waterproofings
Product description
Sopro DSF 423

Two-component flexible sealing slurry
Flexible, two-component, cementitious sealing slurry used to produce crack-bridging waterproof coatings. Suitable for Moisture Exposure Classes A1, A2 and B to Construction Products List A issued by DIBT (German Institute for Construction Technology), and 0, A01, A02 and B0 to ZDB (Federation of the German Construction Industry) data sheet.

Use as Sopro DSF 523 one-component flexible sealing slurry For indoor and outdoor use For walls and floors Water-vapour-permeable For roller, spatula, brush and spray application With ship approval Low-chromate to Regulation 1907/2006 EC, Annex XVII

Waterproofings
Coverage: approx. 1.5 kg/m powder + approx. 0.5 kg/m dispersion per mm coat thickness
Packaging 32 kg packaging comprises: Bag 24 kg with powder component A Canister 8 kg with liquid component B
Packages per pallet

NEW NEW
40 40
Sopro TDS 823

Turbo sealing slurry
MicroGumTechnology
High-performance, flexible, rapid-set, two-component, cementitious sealing slurry used to produce rapid-crackbridging waterproof coatings. Suitable for use in wet spaces, swimming pools, and on balconies and patios. Two-component system ensures weather-independent drying. Maximum flexibility thanks to high-performance polymer dispersion. Very low consumption rate due to high dry coat thickness. Creamy consistency allows smooth application. For roller, trowel and spray application. For waterproof bonding/sealing of joints in Sopro AEB 640/AEB plus 639 waterproofing and separating membranes.

Rapid-set (approx. 2 hours per coat) Rainproof after only approx. 2 hours Withstands 3 bar water pressure after only 6 hours Crack-bridging after only 6 hours Particularly recommended during cold season Working life: 30 40 minutes For walls and floors, indoors and outdoors Water-vapour-permeable For roller, trowel, brush and spray application Low-chromate to Regulation 1907/2006 EC, Annex XVII
Packaging
Containers per pallet 60 60 200 90
Bag 10 kg with powder Component A Canister 10 kg with liquid Component B Bag 4.5 kg with powder Component A Canister 4.5 kg with liquid Component B
69
Waterproofings
Product description
Sopro FDF
Flexible sealing compound
Highly elastic, crack-bridging, solvent-free, one-component liquid polymer waterproof coating. Applied to walls and floors for composite waterproofing in conjunction with tile finish. Used in damp and wet spaces not subject to hydrostatic pressure, e. g. bathrooms, showers, washrooms and sanitary facilities. Suitable for Moisture Exposure Classes A1 to Construction Products List A issued by DIBT (German Institute for Construction Technology), and 0, A01 and A02 to ZDB (Federation of the German Construction Industry) data sheet.

For indoor use Quick-drying (1st coat: 1.5 2.5 hours, 2nd coat: 3 5 hours) Contrast colour to facilitate distinction between coats For roller, spatula, brush and spray application

Waterproofings
Standard colour*
Standard colour: 525 grey
grey
FDF 525
Packaging
Coverage: approx. 0.6 kg/m per coat
Bucket 20 kg Bucket 15 kg Bucket 5 kg Bucket 3 kg
Contrast colour*
Contrast colour: 527 light grey
light grey
FDF 527
Coverage: approx. 0.6 kg/m per coat
70 Tile fixing
products
Waterproofings
Product description
Sopro ADS 630

Waterproofing kit
Complete waterproofing kit with all necessary, compatible products for provision of waterproof barrier on walls and floors underneath ceramic tiles, particularly in showers and bathrooms.

Economical system solution Ready-to-use products Straightforward application Includes application tips
Consists of: 1 ltr Sopro GD 749 primer, 5 kg Sopro FDF flexible sealing compound, 5 m Sopro DB 438 sealing tape, 2 Sopro DMW 090 sealing collar for walls, 1 universal roller
Sopro EPG 522

Epoxy primer

For walls and floors, indoors and outdoors Working life: approx. 40 minutes Ready to receive floor covering: after 24 hours
Coverage: 300 500 g/m depending on substrate
71
Waterproofings
Waterproofings
Product description
Sopro PU-FD
Surface sealant
570 Wall
Solvent-free, white-pigmented, two-component polyurethane liquid resin for sag-resistant (walls 570) and self-levelling (floors 571) elastic coatings for composite waterproofing under ceramic tiles in interior and exterior areas subject to high loads, such as swimming pools, large kitchens, commercial and industrial areas, and on balconies and patios. Suitable for Moisture Exposure Classes A1, A2, B and C to Construction Products List A issued by DIBT (German Institute for Construction Technology), and 0, A01, A02 and B0 to ZDB (Federation of the German Construction Industry) data sheet. Please consult resistance table!
571 Floor
Waterproofings
Resistant to water, sea water, wastewater/sewage, diluted acids, alkaline solutions, chlorinated, lime and thermal water Crack-bridging Permanent load: dry up to +70 C, wet up to +40 C Weather and age-resistant
Packaging
Coverage: approx. 1.6 2.5 kg/m
Bucket 26 kg (component A floors) Bucket 4 kg (component B floors) Bucket 10 kg (component A+B floors) Bucket 5 kg (component A+B walls)
NEW
Sopro PU-FD KF 572

Contrast colour for Sopro PU-FD
To help distinguish between coats and keep check on second application, second membrane coat can be tinted with Sopro PU-FD KF 572 contrast colour.
Coverage: 5 ml/5 kg pro Sopro PU-FD
Packaging Syringe 5 ml (Nr 6 in box)
524 FlexDichtBand FDB 524
For flexible and waterproof bridging of perimeter and movement joints in conjunction with Sopro PU-FD surface sealant system, e. g. in large kitchens and swimming pools. Self-adhesive protective tape with slits for easier application.
Coverage: approx. 1.1 m/m
Packaging Roll (100 mm wide) 30 m (Nr 2 in box)
72 Tile fixing
products
Waterproofings
Product description
Sopro AEB 640

Waterproofing and separating membrane
Thin-sheet, crack-bridging polyethylene waterproofing and separating membrane, faced either side with special nonwoven fabric. The nonwoven fabric ensures strong bond between waterproofing/separating membrane and cementitious tile adhesive. Ideal for trouble-free, flexible waterproofing of wall and floor surfaces beneath ceramic tiling in bathrooms, showers and wet spaces. Sopro Racofix universal adhesive or Sopro TDS 823 turbo sealing slurry used for waterproof bonding and sealing at joints between sheets. Particularly suitable for fast-track waterproofing on tightly scheduled constructions schemes. Suitable for Moisture Exposure Classes 0, A01 and A02 to ZDB (Federation of the German Construction Industry) data sheet.

Coverage: 1.00 1.05 m/m
Packaging Roll 30 m (100 cm wide)
Sopro AEB plus 639

Waterproofing and separating membrane plus
for balconies and patios
Flexible, crack-bridging, stress-relieving waterproof membrane and separating layer. Special nonwoven coating on either side ensures strong bond between membrane and cementitious tile adhesive. Particularly suitable for use as reliable, flexible waterproof membrane and stress-relieving separating layer outdoors on balconies and patios below natural stone coverings and ceramic tiling. Special sheet ensures better stress equalization in response to abrupt temperature changes. Sopro Racofix universal adhesive or Sopro TDS 823 turbo sealing slurry used for waterproof bonding and sealing at joints between sheets. Use of Sopro AEB plus 639 allows installation of natural stone and ceramic coverings without long waiting times. Suitable for Moisture Exposure Classes 0, A01, A02 and B0 to ZDB (Federation of the German Construction Industry) data sheet.

For indoor and outdoor use For walls and floors Particularly suitable for balconies and patios Waterproof As separating layer to provide stress relief Flexible and crack-bridging Alkali-resistant Ageing-resistant and rotproof Good workability Thickness: approx. 1.1 mm
Packages per pallet 35 Pallet weight approx. 232 kg
73
Waterproofings
For indoor use For walls and floors Waterproof Flexible and crack-bridging Alkali-resistant Ageing-resistant and rotproof Straightforward application Thickness: 0.4 mm
Waterproofings
Product description
Sopro AEB 641

Sealing tape
Polyethylene sealing tape, faced either side with special nonwoven fabric, for trouble-free, flexible waterproofing of perimeter and movement joints. For use in conjunction with Sopro AEB 640 beneath ceramic tiling. Also applied over joints in Sopro AEB 640 and Sopro AEB plus 639. Test certificate Available upon request
Waterproofings
Packaging Roll 25 m (120 mm wide)
Sopro AEB 642

Sealing tape for internal angles
Preformed angles made from Sopro AEB 641 for trouble-free, flexible waterproofing of perimeter and movement joints at internal angles. Installed in conjunction with Sopro AEB 641. Size: 130 130 mm Test certificate Available upon request
Sopro AEB 643

Sealing tape for external angles
Packaging Box with Nr 25
Sopro AEB 644

Wall collar
Polyethylene wall collar, faced either side with special nonwoven fabric, for use in conjunction with Sopro AEB 640 for reliable sealing of 1/2 pipe penetrations beneath ceramic tiling. Size: 120 120 mm Test certificate Available upon request
74 Tile fixing
products
Waterproofings
Product description
Sopro AEB 645

Floor collar
Polyethylene floor collar, faced either side with special nonwoven fabric, for use in conjunction with Sopro AEB 640 for reliable sealing of up to 250 mm dia floor drains/gullies beneath ceramic tiling. Size: 450 450 mm Test certificate Available upon request
Racofix
One-component universal adhesive for waterproof bonding/ sealing of joints in Sopro AEB 640/AEB plus 639 waterproofing and separating membranes and for fixing Sopro AEB 641 sealing tape, Sopro AEB 642/643 sealing tape for internal/external angles, Sopro AEB 644 wall collars and Sopro AEB 645 floor collars. Test certificate Available upon request
Coverage: 140 210 g/m depending on application
Sopro TDS 823

Two-component flexible sealing slurry to ensure waterproof seal of joints of AEB 640 and AEB plus 639 and for fixing AEB sealing tape, internal/external angles, wall and floor collars. Test certificate Available upon request
MicroGumTechnology
Packaging
Bag 10 kg with powder Component A Canister 10 kg with liquid Component B Bag 4,5 kg with powder Component A Canister 4,5 kg with liquid Component B
75
Waterproofings
Waterproofings
Product description
Sopro DB 438
Sealing tape
Expansible, nonwoven-backed high-performance sealing tape with extra-high alkali resistance for trouble-free, flexible waterproofing of perimeter and movement joints. Guarantees strong bond with Sopro waterproofing systems. Used in conjunction with brush-on waterproof coating systems comprising Sopro FDF flexible sealing compound or Sopro DSF flexible sealing slurries applied below tiling. Easy bedding of sealing tape due to flexible expansion zone. Test certificate Available upon request
Packaging Waterproofings Roll 50 m (150 mm wide) Roll 50 m (120 mm wide) Roll 10 m (120 mm wide) Roll 50 m (100 mm wide)
Pallet weight approx. 252 kg approx. 192 kg approx. 150 kg approx. 172 kg
Sopro DBF 638

Pre-folded sealing tape
Expansible, woven- and nonwoven-backed, pre-folded high-performance sealing tape for trouble-free, flexible waterproofing of perimeter and movement joints. For use in conjunction with Sopro FDF flexible sealing compound. The central fold facilitates bedding of sealing tape. Test certificate Available upon request
Packaging Roll 50 m (120 mm wide) Roll 10 m (120 mm wide)
Containers per pallet 100 392
Pallet weight approx. 190 kg approx. 165 kg
Sopro DE 014
Sealing tape for internal angles
Preformed Sopro sealing tape angles for trouble-free, flexible waterproofing of perimeter and movement joints at internal angles. Installed in conjunction with Sopro DB 438 sealing tape. Test certificate Available upon request
Sopro DE 015
Sealing tape for external angles
Packaging Pack with Nr 50
76 Tile fixing
products
Waterproofings
Product description
NEW
Sopro DWF 089

Flexible sealing collar for walls
Flexible, alkali-resistant collar used in installation of waterproofing systems for reliable sealing of 1/2 pipe penetrations below tiling. With flexible centre zone. Size: approx. 120 120 mm Test certificate Available upon request
Sopro DMW 090

Sealing collar for walls
Collar used in installation of waterproofing systems for reliable sealing of 1/2 pipe penetrations below tiling. Size: 120 120 mm Test certificate Available upon request
Sopro DMB 091

Sealing collar for floors
Collar used in installation of waterproofing systems for reliable sealing of up to 250 mm dia floor drains/gullies below tiling. Size: 350 350 mm Test certificate Available upon request
Packaging Pack with Nr 25
77
Waterproofings
Shelf module for roll products
Waterproofings
Sopro DBF 638 pre-folded sealing tape, Sopro DB 438 sealing tape, Sopro AEB 641 sealing tape, Sopro fixing tape, Sopro FDB 524 flexible sealing tape
Sopro AEB 640 waterproofing and separating membrane
Sopro AEB plus 639 waterproofing and separating membrane
Sopro WEV 579 polyester nonwoven
Sopro TEB 664 impact sound insulation and separating layer
78 Tile fixing
products
Accessories
Product description
Sopro FDP 558

Tile insulation board 4 mm, 9 mm, 15 mm
Synthetic-resin-bonded polyester fibreboard in 4 mm/9 mm/15 mm thicknesses for sound and thermal insulation in conjunction with ceramic and natural stone coverings, and for stress relief on critical or deformation-prone substrates. Also suitable underneath carpets, parquet floorings and elastic floor coverings made of PVC, rubber, linoleum etc.
l l l l l
l l l l l l
Thermal resistance: Separating board 4 mm Universal underlay and insulation board 9 mm Comfort insulation board 15 mm Thermal conductivity: Separating board 4 mm Universal underlay and insulation board 9 mm Comfort insulation board 15 mm
Test certificate Available upon request 0,042 m K/W 0,095 m K/W 0,158 m K/W
0,0954 W/mK 0,0950 W/mK 0,0947 W/mK
Impact sound reduction: up to 10 dB* Separating board 4 mm Universal underlay and insulation board 9 mm up to 10 dB* Comfort insulation board 15 mm up to 11 dB*
Packaging 4 mm separating board: Box (15 boards) 9 m Pallet (loose on pallet) 120 m
Pallet weight approx. 260 kg approx. 340 kg approx. 375 kg approx. 375 kg approx. 320 kg approx. 375 kg
* The impact sound reduction is tested according to DIN EN ISO 140-8. The performance of trial installations and measurements is recommended, in each case, to establish the actual sound reduction index achievable on site.
9 mm universal underlay and insulation board: Box (10 boards) 6 m 100 Pallet (loose on pallet) 60 m 100 15 mm comfort insulation board: Box (5 boards) 3 m Pallet (loose on pallet) 36 m 50 60
See matrix of impact sound insulation and separating layer systems on page 80.
79
Accessories
For indoor use Increases flexural strength, impact sound and thermal insulation as well as relieving stress when refurbishing wooden floors Improves thermal insulation on poorly insulated floating and separate (bonded) screeds Stress relief on fresh concrete surfaces susceptible to shrinkage, screeds and mixed substrates with a tendency to crack As insulation underneath retrofitted electric floor heating systems to accelerate the heat build-up and increase the heating capacity To compensate tile level when laying tile-on-tile In conjunction with brush-on waterproof coatings for bathroom refurbishments In conjunction with flexible sealing slurries and scrim for balcony and patio refurbishments Complies with Heat Conductivity Group 060 for thermal insu lationmaterials Formaldehyde-free Size 60 cm 100 cm
Accessories
Product description
Sopro TDP 565

Impact sound insulation board 8 mm
Synthetic resin-bonded polyester fibreboard with rubber sandwich coating for specially high demands on impact sound insulation in conjunction with ceramic/natural stone floor coverings. For use in stair constructions in multi-storey residential buildings and on poorly insulated floor surfaces. As a separating layer in refurbishment of old wood-board flooring and old tiled surfaces or thermal insulation in refurbishment/renovation of indoor areas. Also for insulation underneath electric floor heating systems.
l l l l
16dB*
up to
l l l l
For indoor use Up to 16 dB impact sound reduction under ceramic surfaces Improvement of thermal insulation on poorly insulated screeds or separate (bonded) screeds Stress relief on fresh concrete surfaces with a risk of shrinkage as well as on screeds or mixed substrates with a tendency to crack Low construction height Formaldehyde-free Thickness 8 mm Size 60 cm 100 cm
Accessories
Packaging Box (5 boards) 3 m
Sopro TEB 664

Impact sound insulation and separating layer 3 mm
17dB*
up to
Recycled granulated rubber sheet with exceptionally low construction height, for improvement of impact sound insulation performance below ceramic tiling. Sopro TEB 664 is butt-jointed and bonded to existing substrate using flexible Sopro thin-bed or floating-bed adhesives. Also suitable for use in conjunction with hot-water floor heating systems and as separating layer in both new-build and refurbishment works.
l l l l l l l l l
For indoor use Up to 17 dB impact sound reduction below ceramic tiles Improves thermal insulation on poorly insulated screeds or on separate (bonded) screeds Provides stress relief on newly laid, shrinkage-prone concrete surfaces, crack-prone screeds or composite substrates Alkali-resistant Formaldehyde-free Exceptionally low construction height: 3 mm thick Low weight per unit area: approx. 3.1 kg/m Size 1 m 10 m (10 m)
Coverage:: approx. 1.0 m/m
80 Tile fixing
products
See matrix of impact sound insulation and separating layer systems on page 80.
Accessories
Product description
Sopro AR 562
Scrim
Alkali-resistant, plastic-sheathed glass silk fabric for embedding in plasters, renders, fillers, thin-bed mortars, sealing slurries and bituminous waterproof coatings to increase crack resistance. Used to reinforce joints between boards and at perimeter junctions with other building materials when using Sopro FDP 558 tile insulation board.
l l
For indoor and outdoor use Mesh size: 4 mm
Packaging
Pallet weight ca. 244 kg ca. 175 kg ca. 244 kg
Roll 50 m (100 cm wide) Roll 10 m (100 cm wide) Roll 50 m ( 20 cm breit)
Sopro RDS 960

Perimeter insulation strip
Self-adhesive perimeter insulation strip made from rotproof, nonwoven-backed polyethylene foam. Straightforward, reliable application. For incorporation at wall/floor junctions to prevent mortar bridges when applying Sopro tile adhesives or Sopro flow-applied floor-levelling compounds. For use as perimeter insulation strip when installing Sopro FDP 558 tile insulation board, Sopro TEB 664 impact sound insulation and separating layer, and Sopro TDP 565 impact sound insulation board.
l l l l l
Straightforward, reliable application Eliminates sound transmission paths and restraint stresses at perimeter wall/floor joints Straightforward, reliable corner detailing Excellent adhesion to clean substrates For indoor and outdoor use
Size: 50 mm high, 5 mm thick, 40 mm bonded nonwoven

Packaging Roll 25 m (4 units in box) Packages per pallet 48 Pallet weight approx. 34,8 kg
NEW
Sopro ERS 961

Perimeter insulation strip for screeds Height 100 mm
Self-adhesive perimeter insulation strip made from rotproof, nonwoven-backed, closed-cell polyethylene foam. Straightforward, reliable application. For incorporation at wall/floor junctions to prevent mortar bridges. Suitable for all types of cement and calcium sulphate-based screed. Particularly recommended for use in conjunction with Sopro Rapidur FE 678 self-levelling screed.
l l l l l
Straightforward, reliable application Eliminates sound transmission paths and restraint stresses at perimeter wall/floor joints Straightforward, reliable corner detailing Excellent adhesion to clean substrates For indoor and outdoor use
Size: 100 mm high, 8 mm thick, 40 mm bonded nonwoven
Packaging Roll 20 m (5 units in box)
Pallet weight approx. 45.1 kg
81
Accessories
Accessories
Product description
Sopro WEV 579

Polyester nonwoven
Special, reinforced polyester nonwoven as separating layer underneath ceramic tiles and for installation of removable ceramic tile surfaces. Separating layer Particularly suitable as a separating layer in composite constructions on critical, fresh substrates with a tendency to crack. Stress caused by residual shrinkage, hairline cracks and deformation of substrate, for example, is not transferred to tiled surface. Removal of coverings Particularly suitable for sample tiling and exhibition booths or for fitting out rented dwellings to preserve existing floor coverings. Tiles are laid on Sopro WEV 579 nonwoven, which is secured with fixing tape. When necessary, the tile covering can be removed quikkly and cleanly along with nonwoven without damaging the substrate.
l l l l l l
For indoor use For walls and floors Used in composite constructions to relieve stress between ceramic tiles and fresh cement screeds and concrete surfaces For the installation of removable tile surfaces Construction height 0.7 mm Size 1 m 50 m
Accessories
Fixing tape Self-adhesive velcro tape for secure fixing of Sopro WEV 579 nonwoven as removable surface on walls and floors in indoor areas.
NEW
Sopro DRM 653

Drainage mat 8 mm
Excellent drainage capacity
Drainage mat made of polyethylene and non-woven fabric. Use in conjunction with Sopro DRM 610 drainage mortar ensures reliable horizontal drainage of balconies, patios and staircases underneath ceramic and natural stone tile finishes. The Sopro DM 653 drainage mat is loose laid on flexible sealing slurries, e. g. Sopro DSF 523 or 623, or waterproof sheeting to DIN 18 195. Also suitable as a protection or drainage layer for bituminous waterproof coatings or sheeting.
l l l l
For outdoor use Reliable horizontal drainage underneath Sopro DRM 610 drainage mortar Low construction height (8 mm) High compressive strength
Packaging Roll 12,5 m (100 cm wide)
82 Tile fixing
products
Accessories
Product description
Sopro EFH 569

Electric floor heating
Electric heating mat with a low installation height and only one connection cable for laying directly underneath natural stone and ceramic floor coverings, PVC, wood and carpeted floors. Offers thermal comfort for feet in sanitary areas and allows heating of areas where no radiators are to be visible. Pleasant environmental conditions through mild radiant heat. Economical through low heating costs. Very suitable for increasing heating capacity in conjunction with Sopro FDP 558 tile insulation board.
l l l l l l l l
For indoor use For walls and floors Only one connection cable For new-build and refurbishment schemes Laid in flexible thin-bed or floating-bed mortar Connection voltage 230 V Very low installation height 2.8 mm Includes conduit and sensor sleeve Heating mats 50 cm wide 50 cm 100 cm 50 cm 200 cm 50 cm 400 cm Additional sizes on request.
Heating mats 100 cm wide 100 cm 100 cm 100 cm 150 cm 100 cm 200 cm 100 cm 300 cm 100 cm 400 cm 100 cm 500 cm 100 cm 600 cm
56906
Timer temperature control (flush-mounted) Timer with digital display for lowering the temperature of electric floor heating system to an energy-saving +15 C or +19 C; daily and weekly programme, holiday timer and manual setting options. Simple operation via function keys. Timer temperature control (surface-mounted) Timer with digital time and temperature display. Manual operation plus daily, weekly and party programmes, frost protection function (e.g. for holidays), operating hours display and protection against use by non-authorized persons. Convenience temperature control (flush-mounted) On-off switch and continuously adjustable floor temperature settings with temperature reduction display by LED.
56907
56905
56904
Standard temperature control (flush-mounted) Temperature control for continuously adjustable (+5 C to +45 C) floor temperature settings.
569
Full kit Electric heating mat with 4 m connection cable, (flush-mounted) timer temperature control, 2 m flexible conduit and switch box. Full kit, 100 cm wide 100 cm 150 cm 100 cm 200 cm 100 cm 300 cm Full kit, 50 cm wide 50 cm 100 cm 50 cm 200 cm
83
Accessories
Sopro impact sound insulation and separating layer systems
Sopro FDP 558 tile insulation board
Sopro TDP 565 impact sound insulation board Pressed, formaldehyde-free, resin-bonded, coated polyester fibreboard 8 mm impact sound insulation board 100 cm 60 cm approx. 4.2 kg/m Package: 5 panels = 3 m
Sopro TEB 664 Impact sound insulation layer Recycled granulated rubber sheet
Composition
Water-resistant, rotproof, pressed, resin-bonded polyester fibreboard. Formaldehyde-free, poses no health hazards
Accessories
Thickness
4 mm separating board
9 mm universal underlay and insulation board 100 cm 60 cm approx. 6.3 kg/m Carton: 10 panels = 6 m pallet: 100 panels = 60 m up to 10 dB* with tiling 0.0950 W/mK 0.095 m K/W 614 MN/m 11.3 g/m d
15 mm comfort insulation board 100 cm 60 cm approx. 10.5 kg/m Carton: 5 panels = 3 m pallet: 60 panels = 36 m up to 11 dB* with tiling 0.0947 W/mK 0.158 m K/W 439 MN/m 19.1 g/m d
3 mm Impact sound insulation layer 1 m 10 m (Rolle) approx. 3.1 kg/m 1 roll = 10 m
Board size Weight Packaging
100 cm 60 cm approx. 2.9 kg/m Carton: 15 panels = 9 m pallet: 200 panels = 120 m up to 10 dB* with tiling 0.0954 W/mK 0.042 m K/W 21.2 g/m d
Impact sound reduction
up to 16 dB* with tiling 0.085 W/mK 0.10 m K/W 300 MN/m 233 g/m d
up to 17 dB* with tiling 0.075 W/mK 0.04 m K/W
Thermal conductivity Thermal resistance Dynamic stiffness Water-vapourtransmission rate Fire rating to DIN EN 1350-1
class E (normal flammability)
class E (normal flammability)
Note: The impact sound reduction values determined and stated by the test institute are not alw ays applicable to particular construction projects due to differences between the projectspecific assembly and the standard test set-up. The performance of trial installations and measurements is therefore recommended, in each case, to establish the actual sound reduction index achievable on site!
84 Tile fixing
products
Cleaning, impregnation and maintenance

Product description
Sopro BIR 711

Intensive biological cleaner
Phosphate- and solvent-free, biodegradable all-purpose cleaner for soiling to all kinds of ceramic surface, metal, plastics, wood etc.

Powerful dirt remover Does not harm even sensitive surfaces Biodegradable For indoor and outdoor use
Packaging
Packages per pallet 60 90 480 276 480
Pallet weight 640 kg 480 kg 522 kg 304 kg 276 kg
Coverage: depends on type and degree of soiling
Canister 10 ltr Canister 5 ltr Bottle 1 ltr (Nr 4 in box) Spray bottle 1 ltr (Nr 4 in box) Spray bottle 0,5 ltr (Nr 4 in box)
Sopro OWE 715

Oil and wax remover
Special cleaner for oil, grease and wax stains on ceramic surfaces, concrete, other mineral substrates, natural and cast stone surfaces etc.

Removes dirt and makes surface washable with water Ready-to-use For indoor and outdoor use
Coverage: sufficient for 7 15 m/ltr, depending on degree of soiling and substrate suction
Sopro SR 716
Sanitary cleaner
Acidic sanitary cleaner for cleaning and disinfection of bathrooms, showers, swimming pools, toilets, tiled workplaces and social rooms.

Self-shining without need to polish Biodegradable Does not attack elastic jointing and sealing compounds
Coverage: sufficient for 15 30 m/ltr, depending on type and degree of soiling
85

Product description
Sopro SE 717
Mould inhibitor and remover
Special disinfectant cleaner which prevents reformation of mould and removes mould, algae, moss, lichens and mildew from tiles, joints, natural and cast stone, masonry, plaster, wood and plastics.

Acts quickly and thoroughly Biodegradable Chlorine- and phosphate-free Also suitable for gravestone care For indoor and outdoor use
Coverage: depends on type and degree of soiling and surface properties
Sopro KGR 633

Fireplace glass cleaner
Ready-to-use alkaline cleaner containing active cleaning ingredients plus special grease- and dirt-removing additives. For effortlessly swift and efficient removal of soot and burnt-on residue. Suitable for fireplace and stove glass, microwave, grill and oven glass panels, Ceran hobs and all types of refractory glass.

Highly efficient removal of soot With long-lasting results For all types of refractory glass For Ceran hobs
Packaging Spray bottle 0,5 ltr (Nr 4 in box)
For ceramic
Sopro GR 701
Basic cleaner Versatile, water-thinnable cleaning concentrate for thorough cleaning of heavily soiled surfaces and occasional interim cleaning of heavy-duty areas.

Removes oil and grease, wax, tar, care product residue and much more For ceramic, natural and cast stone coverings For pre-cleaning prior to tile-on-tile laying For indoor and outdoor use
Coverage: undiluted approx. 100 ml/m, diluted approx. 20 ml/m, depending on substrate
Packaging Canister 5 ltr Bottle 1 ltr (Nr 4 in box)
86 Tile fixing
products

Product description
Sopro WP 707
Wipe-on care
Very high-coverage, environmentally friendly cleaning and care concentrate for ceramic, brick and clinker tiles, cast stone units and terrazzo.

Cleaning and cares in single operation For long-term application Non-film-forming, non-leaching For indoor and outdoor use
Coverage: given normal soiling and weekly cleaning, 1 ltr should last for approx. 6 months for 100 m floor area
Sopro FS 714
Stain stop
Special impregnation for stain-repellent treatment of floor and wall coverings made of absorbent and hence stain-sensitive, coarse ceramic tiles (terracotta, clinker etc.) and natural stones such as marble, limestone and granite.

Oil-, grease- and water-repellent UV-resistant, non-yellowing For indoor and outdoor use
Bottle 1 ltr (Nr 4 in box)
480
408 kg
Sopro ZSE 718

Cement skin remover for indoor use
Concentrated, highly-active acidic cleaner for removing cement skin, rust, lime, grease and soap residue, various types of soiling and deposits of all kind, on all surfaces non-sensitive to acids, such as ceramic tiles, clinker, terracotta, exposed-aggregate concrete, natural stone, plastics, resin-bonded tiles, chrome and stainless steel.

Particularly suitable for final cleaning upon completion Contains no hydrochloric acid, no corrosive vapours For indoor use
Coverage: 70 100 ml/m depending on degree of soiling
Sopro ESE 548

Epoxy film remover
For removal of surface-dried or hardened epoxy resin film from tiling. Epoxy resin residue (film) can still be cleaned off days after application.

For indoor and outdoor use Concentrate For removal of film from smooth and slip-resistant tile coverings For later cleaning of epoxy resin-grouted coverings
87
Coverage: sufficient for 20 30 m/ltr, depending on substrate suction
Please note: Do not apply until surfaces are fully dry (4 6 weeks after laying)!
Packaging Packages per pallet Pallet weight

Product description
For fully vitrified stoneware

Sopro FPR 708
Fully vitrified stoneware cleaner Cleaning and care concentrate for routine maintenance of normally soiled fully vitrified stoneware surfaces. Lifts and removes general dirt, light oil and grease films, rubber and shoe sole stains without streaks.

Cleans and polishes without streaks in single operation Non-film-forming Cleaned surfaces become more attractive and resistant with regular use For indoor and outdoor use
Coverage: undiluted 400 500 m/ltr
Sopro FIR 713

Fully vitrified stoneware intensive cleaner
Lifts and removes oil and grease films, rubber and shoe sole stains, polymer and wax coatings, gloss emulsions, tough stains etc. from fully vitrified stoneware surfaces. Used for regular cleaning of heavy-duty surfaces and for occasional thorough cleaning.

Biodegradable Solvent-free High coverage For indoor and outdoor use
Coverage: undiluted approx. 10 15 m/ltr, diluted approx. 50 100 m/ltr, depending on degree of soiling
Sopro FFP 719

Fully vitrified stoneware stain stop
Impregnation especially for fully vitrified stoneware surfaces which offers lasting protection against water, oil, grease and other stains.

Facilitates maintenance and care, non-glossing Specially suitable for newly laid or polished surfaces For indoor and outdoor use
Coverage: sufficient for 30 40 m/ltr
88 Tile fixing
products

Product description
For natural stone

Sopro MNP 704
Natural stone stain stop Transparent impregnation especially for marble, natural and cast stone surfaces which provides long-lasting protection against oil, grease and water stains.

For protection against staining and to facilitate cleaning UV-resistant, non-yellowing For indoor and outdoor use
Coverage: sufficient e. g for 30 m/ltr on polished stone surfaces. Otherwise, coverage depends on substrate suction
Sopro MNF 705

Natural stone colour enhancer
Special product for enhancing natural colour and texture of natural stone surfaces which appear too pale and colourless or which need to match colour of polished surface.

Coverage: sufficient for approx. 10 m/ltr depending on suction of covering
Sopro MNW 706

Natural stone wipe-on care
Environmentally friendly cleaning and care concentrate for all marble, natural and cast stone surfaces, particularly useful where quick cleaning and lasting care are required in single operation.

Non-film-forming, non-leaching For permanent application For indoor and outdoor use
Coverage: given normal soiling and weekly cleaning, 1 ltr should last for approx. 6 months for 100 m floor area
89
For absorbent, porous natural/cast stone and marble Non-glossing For indoor and outdoor use

Product description
For terracotta
Sopro CES 736
Extra terracotta anti-stain protection Additional impregnation of all untreated, absorbent terracotta, clay, brick, stove tile and similar surfaces, especially in stainsensitive areas such as kitchens and dining rooms.

Guarantees maximum stain protection for absorbent surfaces after final treatment Always applied prior to final treatment with Sopro CDW 742 terracotta wax finish Solvent-free For indoor use
Coverage: sufficient for approx. 10 m/ltr
Sopro AH 737
Terracotta grouting aid
Solvent-free impregnation to facilitate removal of tile grout from terracotta, clay and brick tiles.

Protects absorbent surfaces from soiling by tile grout Promotes adhesion of tile grout to joint faces For indoor and outdoor use
Coverage: sufficient for 5 10 m/ltr with soft clay tiles, Spanish and French terracotta types, and 10 15 m/ltr with Italian or Florentine terracotta
Sopro CPM 738

Terracotta care concentrate
Solvent-free care concentrate for occasionally refreshing of waxed, terracotta, clay and brick tile finish.

Intensifies colour and freshens appearance Increases the protective performance of waxed surfaces For indoor use
Coverage: undiluted 20 ml/m, diluted approx. 150 m/ltr
90 Tile fixing
products

Product description
Sopro CDW 742

Terracotta wax finish
Ready-to-use wax product for self-shining, durable protection of terracotta, clay and brick tiles and similar surfaces. Also for factory pretreated or waxed terracotta tiles.

Intensifies natural light colour Very abrasion resistant For indoor use
Coverage: sufficient for 5 10 m/ltr with soft clay tiles, Spanish and French terracotta types (2 coats), and 10 15 m/ltr with Italian or Florentine terracotta and pre-impregnated, pretreated or waxed surfaces
Pallet weight 520 kg Cleaning, impregnation and maintenance
For outdoor use

Sopro PFA 867
Paving grout cleaning aid Water dissolved, high-alkaline product to achieve temporary water repellency of absorbent concrete and natural stone pavers to facilitate grouting. Sopro PFA 867 paving grout cleansing aid penetrates capillary system of mineral pavers to achieve water repellency, thereby allowing easier removal of Sopro paving grouts. Also suitable as cleansing aid for polygonally laid natural stone tiles in wall and floor areas.

For indoor and outdoor use Walls and floors For brush and spray application Low consumption For cementitious and epoxy resin bonded Sopro paving grouts
Coverage: 1 ltr is sufficient for 5 15 m, depending on substrate
Packaging Canister 10 ltr Canister 5 ltr Bottle 1 ltr (Nr 4 in box)
91

Product description
Sopro ZEA 703

Cement skin remover for exterior use
Concentrated, high-performance acidic cleaner for removing cement skin, lime and mortar residue plus efflorescence and tough soiling on all surfaces non-sensitive to acids, such as ceramic tiles, clinker, mosaic and terracotta.

Acts quickly and thoroughly Only suitable for exterior use due to strong odour Particularly suitable for first-time cleaning of newly laid wall and floor finishes
Coverage: sufficient for 10 15 m/ltr, depending on degree of soiling
Sopro GBE 746

Algae and moss remover
Self-acting, concentrated cleaner for removal of slippery growth and other surface soiling caused by trees and plants.

Thorough, effortless removal of soiling in outdoor areas Particularly suitable for balconies, stairs, terraces etc. Preventive
Coverage: approx. 40 m/ltr for application by watering can, up to approx. 150 m/ltr for spray application
Sopro KL 709
Clinker oil
Special ready-to-use product for refreshing and enhancing colour of matt, unglazed clay and clinker tiles, brick tiles and similar unglazed ceramic wall and floor finishes.

Non-film-forming, non-glossing Improves stain resistance and facilitates maintenance For indoor and covered outdoor areas
Coverage: approx. 5 10 m/ltr, depending on substrate suction
92 Tile fixing
products

Product description
Sopro RU 632
Rust converter
Acidic, reoxidizing stone cleaner with special anti-rust ingredients for rust removal and conversion. For cleaning iron-bearing natural stone and removing rust and associated discoloration from acidresistant substrates. Also suitable for treating rust stains on cast stone units caused by surface corrosion of nails and other ferrous components etc.

Highly efficient removal of rust With long-lasting results Protects against renewed rusting For indoor and outdoor use
Bottle 1 ltr (Nr 4 in box)
480
624 kg
Sopro KRA 631

Power cleaner for outdoors
High-performance, acidic cleaner for removal of efflorescence, concrete and mortar residue, incrustations and general soiling from any type of acid-resistant surface, e. g. natural and cast stone, walls, facades, patios, clinker, tiling etc.

High-efficiency cleaning Extra-strong concentrate Rinse only with water after application time For outdoor use
93
Coverage: 1 ltr per 7 15 m depending on type and degree of rusting
Packaging
Packages per pallet
Pallet weight
Secondary placement
Counter display
94 Tile fixing
products
Refractory products
Product description
Sopro FM 436
Fireplace mortar
Chamotte mortar made from natural raw materials. Sets ceramically. Used for masonry (infill) to fireplaces and heating gas flues in tiled stoves, fire stoves, heating units, kitchen stoves, ovens, barbecues and for repairing defects in fireclay linings to a depth of 5 mm.

For indoor use Covered outdoor areas
Coverage depending on application
Packaging Bag 25 kg Bucket 5 kg
Sopro HM 437
Refractory mortar
Chamotte mortar made from natural raw materials for fixing absorbent industrial, hand-made and fireclay tiles and fireclay bricks or tiled stoves, fire stoves, open fireplaces, kitchen ranges etc. Sets ceramically and not hydraulically as it contains no cement. Excellent deformation properties, extremely low shrinkage, no cracking.

For indoor use Covered outdoor areas
Coverage depending on application
Packaging Bag 25 kg
Sopro HPF 942

Refractory plaster
Fine-grained, white, fibre-reinforced, hydraulically rapid-set plaster mortar made from natural mineral raw materials for all plasterwork to chimneys, tiled stoves, kitchen stoves and hypocaust systems. For creating smooth or textured surfaces and for plastering apron and base of tiled stoves. Meets requirements of mortar group P II to DIN 18 550.

For indoor and outdoor use One- or two-coat plasterwork Basecoat and finishing coat Low-chromate to Regulation 1907/2006 EC, Annex XVII
Coverage approx. 1.3 kg/m2 per mm coat thickness
Packaging Bag 25 kg
95
Refractory products
Tiling tools
Delivery form
Standard programme
Mixing bucket 012
45 l single item
Measuring bucket 093

10 l
single item
Turbo stirrer attachment 081

Stirrer attachment for mixing Sopro flow-applied surface fillers. For M14 thread stirrers and drills
single item
Sponge float 076

Tiling tools
single item/Box with Nr 40
Universal hand sponge 087
96 Tile fixing
products
Tiling tools
Delivery form
Cleaning basin with handle 092

Full kit (incl. roller set)
single item
Metal roller set 092
single item
Spiked roller 011

To release air from surface fillers, width 25 cm, spike length 60 mm
single item
NEW
Short-pile roller 004

25 cm wide, 8 mm pile, solvent-resistant
single item
For application of Sopro MGR 637 multi-purpose primer and Sopro epoxy primers.
Special epoxy programme

Spiked roller for epoxy 016
To release air from epoxy and Sopro FDF flexible sealing compound coatings. Plastics with metal handle, width 25 cm, spike length 11 mm single item
Tiling tools
Special grout float for epoxy 075
single item
97
Tiling tools
Delivery form
Velcro pad holder 080 Coarse wash 088

blue
single item/Box with Nr 20 single item/Box with Nr 30
Fine wash pad 083

white
Viscose sponge 084
Soprodur-tools
Professional mixing device 909

single item
For mixing 26 kg Soprodur void-filling microcement slurry With fixing claw for attachment to Soprodur bucket With special mixing disc An electric drill, 1/2 20 UNF, with 43 mm European standard spindle collar, minimum speed > 2000 rpm is required
Tiling tools
Hand syringe 903 Spare parts set for hand syringe 904
single item Set (2 pressure connection pieces, 1 suction connection piece, 2 hoses, 1 white and one yellow adapter, 1 end piece)
98 Tile fixing
products
Tiling tools
Delivery form
Injection press 905 Spare parts set for injection press 908
single item Set (1 inlet sealing piston, 1 outlet sealing piston, 1 gasket, 6 o-rings)
6 mm tile packer 906 8 mm tile packer
Set (10 packers, 10 end pieces, 20 plugs) Set (10 packers, 10 end pieces, 20 plugs)
6 mm mortar packer 907 8 mm mortar packer
Set (10 packers, 10 end pieces, 20 plugs) Set (10 packers, 10 end pieces, 20 plugs)
Choosing the right packer

Sopro tile packer
Tile Bedding mortar/ levelling coat Plug Screed Concrete slab/ base Injection Gasket Injection Gasket
Sopro mortar packer

Tile Contact layer Plug
Mortar
99
Tiling tools
Decorative Stucco
Product description
Sopro G 620
White smoothing compound
Crack-free, water-vapour-permeable, gypsum/polymer-based compound used to create smooth, stress-free wall and ceiling surfaces. Applied to masonry, plasterwork, concrete and gypsum plasterboard substrates prior to finishing with ambiento decorative stucco and glazing systems. Fills cracks, holes and joints.

lit
y le v el Q 1
Q
ac
c. to D
N IN E
For walls and ceilings For indoor use Straightforward application High coverage Allows extra-fine coating Working life: approx. 45 minutes
Qu
13
Coverage approx. 0.9 kg powder/m per mm coat thickness
Sopro F 820
White filler compound
Qu
96 3
ac
c. to DIN E N
13
Painters scrim
Order no. 172
ambiento
Coverage approx. 1.1 m/m
e Ty p e Ty p
96 3
Packaging Bag 20 kg Bag 5 kg (Nr 4 in box) Pot 1 kg (Nr 16 in box)
lit
y le v el Q 1
Q
Crack-free, water-vapour-permeable, gypsum/polymer-based compound used to fill large-area hollows in masonry, plasterwork, concrete and aerated concrete substrates as well as joints between gypsum plasterboard prior to finishing with ambiento decorative stucco and glazing systems. Also used to fill cracks, holes, joints and chases.

For walls and ceilings For indoor use Straightforward application High filling power Working life: approx. 30 minutes
White glassfibre nonwoven used to produce uniform substrate and to reinforce ambiento finishes when applied to cracked plaster or mortar substrates. Also suitable for use in narrow strips to reinforce gypsum plasterboard joints. For bonding with ambiento glassfibre adhesive.

Crack-bridging Water- and weather-resistant Rotproof For indoor use For walls and floors
100 Tile fixing

products
Decorative Stucco
Product description Ready-to-use, solvent-free dispersion adhesive for bonding ambiento painters scrim, glassfibre and nonwoven wallcoverings to plaster, concrete, paperless gypsum panels, gypsum plasterboard and gypsum fibreboard.

Glassfibre adhesive
Order no. 175
Water-thinnable High early bond strength Extended open time Vapour-permeable For indoor use For walls and ceilings
Coverage: 250 350 g/m
Deep-Penetrating Primer
Order no. 101
Transparent-white, solvent-free deep-penetrating primer for stabilizing friable substrates, e.g. cement, lime or lime/cement renders and gypsum plasters. Reduces and evens out suction of paperless gypsum panels, gypsum plasterboard and gypsum fibreboard.

Vapour-permeable High coverage High penetration and stabilizing effect Saponification-resistant For indoor and outdoor use For walls and ceilings
Coverage 150 350 ml/m depending on substrate suction
Packaging Canister 5 ltr Pot 1 ltr (Nr 12 in box)
102 Primer-Sealer
Order no. 102
Solvent-free Ready-to-use For indoor and outdoor use For walls and ceilings Tintable with ambiento Color
Coverage 100 200 ml/m per coat
Packaging Bucket 5 ltr
101
ambiento
Special, white, quartz-filled primer used to prevent discoloration through water, nicotine, tar, bitumen and soluble substances leached from substrate. Protects substrate from moisture ingress, making it ideal for preparation of timber and wood-based substrates prior to subsequent coating. Represents standard preparation for subsequent application of ambiento Humidity-Control Plaster.
Decorative Stucco
Product description High-opacity, white basecoat for ambiento Marble Plaster and Creative Glaze. Produces even-coloured white substrate with uniform suction.

White Ground
Order no. 103
Matt Solvent-free Vapour-permeable Non-drip and spatter-free High opacity, Class 1 to DIN EN 13 300 Scrub-resistant to DIN 53 778 (Class 2 abrasion resistance to DIN EN 13 300) For indoor and outdoor use For walls and ceilings Tintable with ambiento Color
Coverage: 100 150 ml/m per coat
Marble Plaster
Ready-to-use marble plaster compound for vibrant, creative Venetian-style wall and ceiling finishes in bathrooms, kitchens and living spaces or externally on facades.

Pre-pigmented Solvent-free Resistant to damp environments Vapour-permeable High coverage Good workability For indoor and outdoor use For walls and ceilings Order no. 105 bahama 104 siena 109 azuro 111 ruby
Packages per pallet 75 Pallet weight 375 kg
Colours: Order no. 107 terracotta 106 melba 108 reseda 110 sahara
Coverage: 120 140 g/m per coat
ambiento Marble Plaster Colours*
ambiento
white
terracotta
melba
reseda
sahara
bahama
siena
azuro
ruby
102 Tile fixing

products
Decorative Stucco
Product description White, tintable marble plaster compound for vibrant, creative Venetian-style wall and ceiling finishes in bathrooms, kitchens and living spaces or externally on facades.

White Marble Plaster

Order no. 114
Same properties as ambiento Marble Plaster Tintable with ambiento Color
Coverage: 120 140 g/m per coat
Marble Wax
Order no. 135
Cream to enhance gloss effect, improve water repellency and protect surface of decorative ambiento Marble Plaster finishes.

Low-solvent cream based on natural waxes with special additives and care ingredients High coverage Ready-to-use Good workability For indoor use For walls and ceilings
Coverage: 14 17 ml/m
Packaging Pot 500 ml (Nr 10 in box)
Marble Wax gold

Order no. 173
Special wax formulation with gold or silver metal powder for enhancement of ambiento Marble Plaster finishes.

silver
Order no. 174
Coverage: 7 10 g/m
Packaging Pot 150 g
103
ambiento
Polishable to high gloss High coverage Ready-to-use For indoor use For walls and ceilings
Decorative Stucco
Product description Tinters for special colouring of ambiento White Marble Plaster, White Creative Glaze, White Decorative Paint, White Ground, White Textured and Modelling Filler.

Color
Solvent-free Excellent miscibility High colouring power Scrub-resistant to DIN 53 778-S-SM (Class 2 wet abrasion resistance to DIN EN 13 300) Order no. 117 aquamarin 120 pigeon-blue 122 mint 128 umbra 123 tobacco 127 nutmeg 126 anthracite
Colours: Order no. 118 golden yellow 125 ochre 119 tangarin 115 terra 116 apricot 124 coral 121 bordeaux
Coverage: depends on mixing ratio
Packaging Bottle 250 ml (Nr 10 in box)
Measuring beaker
Order no. 136
ambiento Color colours*
ambiento
golden yellow
ochre
mandarin
terra
apricot
coral
bordeaux
aquamarin
pigeon-blue
mint
umbra
tobacco
nutmeg
anthracite
104 Tile fixing

products
Decorative Stucco
Product description Ready-to-use, solvent-free textured paint for production of finely textured surfaces for ambiento Creative Glaze.

White Textured
Order no. 139
Water-thinnable Ready-to-use Good workability Non-drip and spatter-free Good hiding power, Class 2 to DIN EN 13 300 For indoor and outdoor use For walls and ceilings Tintable with ambiento Color
Coverage 250 500 ml/m depending on coat thickness and texture
Modelling Filler
Order no. 140
Ready-to-use, dispersion-based filler for production of rustictextured surfaces for ambiento Creative Glaze.

Solvent-free Water-thinnable Good workability For indoor and outdoor use For walls and ceilings Tintable with ambiento Color
Coverage 1.2 1.8 kg/m depending on coat thickness and texture
105
ambiento
FKM XL highly-exible tile adhesive system

Universal application (thin-, oating-, medium-bed tilelaying and levelling coat)
Substrate
Existing tile covering Timber substrate
Substrate preparation
Bonding layer and combed bed

FKM XL 444 highlyexible tile adhesive Thin-bed laying Floating-bed laying
Grouting
Sopro DF 10 or Sopro Brillant water-repellent tile grout

FKM XL 444 highlyexible tile adhesive Medium-bed laying Thin-bed laying
Levelling coat
Substrate
Concrete Sopro FKM XL 444 highlyexible tile adhesive
106 Tile xing

products
MG-Flex-system
Highly exible, stress-relieving and impact sound-insulating tile laying
Substrate
Young concrete (min. 28 days old) Timber substrate
GD 749 primer HPS 673 bonding primer

MG-Flex 669 exible tile adhesive
Grouting

MG-Flex 669 exible tile adhesive
None GD 749 primer
Substrate
Existing tile covering Young cement screed
107
Product-systems
megaFlex S2 turbo-system
Tile laying on balconies and patios at critical +5C temperature boundary
Substrate
Outdoor concrete surfaces Sopro AMT 468 levelling mortar with trass
1st waterproof coat
Waterproong
TDS 823 turbo sealing slurry
2nd waterproof coat
Bonding
MEG 666 megaFlex S2 turbo exible tile adhesive
Grouting
FL exible tile grout
Product-systems
108 Tile xing

products
megaFlex S2-system
Stress-relieving tile laying on critical substrates
Substrate
Mastic asphalt Young cement screed Existing tile covering
HPS 673 bonding primer HPS 673 bonding primer
Bonding
MEG 665 megaFlex S2 exible tile adhesive
Grouting
Product-systems
109
SoproDur HF system
Trouble-free tile laying in heavy-duty industrial spaces
Substrate
Concrete
GD 749 primer
Surface lling
Sopro HF-S 563 oor levelling compound
Bonding
Sopro VarioFlex HF 420 exible tile adhesive
Grouting
Product-systems
SoproDur HF 8 tile grout
110 Tile xing

products
White medium-/thick-bed mortar system

Rapid-setting for discoloration-sensitive coverings
Substrate
Concrete
GD 749 primer
Bonding layer
MDM 885 medium-bed/thick-bed mortar white
Grouting
Product-systems
Sopro Saphir M water repellent marble grout
111
Sopro PUK 503 system

Reliable laying of natural stone units on metal substrates
Substrate
Metal
Bonding
PUK 503 PU adhesive
Grouting
Product-systems
Sopro DF 10 or Sopro Saphir M water-repellent marble grout
112 Tile xing

products
Terracotta system
Even laying of terracotta units with maximum protection against discoloration
Substrate
Screed (with GD 749 primer)

MB 425 tile adhesive with trass or MB 414 rapidset exible tile adhesive with trass
Grouting aid
Sopro AH 737 terracotta grouting aid
Grouting
MFb tile grout (for 5 20 mm joints) Concrete grey with Trass
Acid cleaning
ZSE 718 cement skin remover for interior use
Surface protection
CES 736 extra terracotta anti-stain protection
Final treatment
CDW 742 terracotta wax nish
Maintenance
CPM 738 terracotta care concentrate
113
Product-systems
Marble system
Laying of natural stone units with maximum protection against discoloration
Substrate
Screeds
GD 749 primer

MFK 446 exible adhesive for marble tiles
Grouting
Sopro Saphir M water-repellent marble grout Marble Silicon
Product-systems
114 Tile xing

products
Sopros No. 1 white system

Laying and grouting of glass mosaic with Sopros No. 1 white and Sopros No. 1 white rapid-set exible tile adhesive in wet spaces
Substrate
Fibre gypsum-board
GD 749 primer
1st waterproof coat
Waterproong
FDF exible sealing compound
2nd waterproof coat
Combed bed and grouting

Sopros No. 1 996 white, exible tile adhesive or Sopros No. 1 997 white, rapid-set exible tile adhesive + 10 % FD 447 exibilizing dispersion
115
Product-systems
Tile-on-tile system
Trouble-free tile laying on existing tile coverings
Substrate
Existing tile coverings
Bonding
Sopros No.1 exible tile adhesive or FKM XL 444 highlyexible tile adhesive
Grouting
Product-systems
116 Tile xing

products
Refurbishment system
Trouble-free tile laying on existing/damaged substrates
Substrate
Old adhesive residue from carpeting or PVC coverings Cracks in screed lled with GH 564 cast resin
HPS 673 bonding primer GD 749 primer
Surface lling
FS 15 plus oor-levelling compound

Sopros No. 1 exible tile adhesive VF 413 VarioFlex tile adhesive
Grouting
Product-systems
Sopro DF 10 or Sopro Brillant waterrepellent tile grout
Sanitary Silicone
117
Flow-applied ller system

Self-levelling system for evening out irregular substrates
Substrate
Existing combed bed Existing tile coverings
GD 749 primer HE 449 bonding emulsion
Surface lling
FS 15 plus oor-levelling compound
Bonding
Sopro VF XL 413 VarioFlex large-format exible adhesive
Grouting
Product-systems
Sopro DesignFuge Flex or Sopro Brillant water-repellent tile grout
118 Tile xing

products
Balcony waterproong system

Reliable waterproong for tiling on balconies and patios
Substrate
Screeds on balconies or patios (pre-wet to ensure substrate is slightly damp prior to coating, create slope with Sopro AMT 468 if necessary)
t of coa terpro a w 1
st
coat proof nd water 2
Waterproong
DSF 523 one-component exible sealing slurry
Accessories
DB 438 sealing tape DBF 638 Pre-folded sealing tape DE 014/015 sealing tape for angles DMB 091 sealing collar for oors

Sopros No.1 exible tile adhesive or Sopro VF XL 413 VarioFlex large-format exible adhesive
Grouting
Product-systems
Ceramic Silicone
119
Sanitary waterproong system

Lasting protection of tile coverings in bathrooms/ damp spaces against moisture penetration
Substrate
Gypsum breboard
GD 749 primer
st
Waterproong
FDF exible sealing compound
Accessories
Sopro DBF 638 Sealing tape Sopro DE 014/015 Sealing tape for angles Sopro DMW 090/ DWF 089 Sealing collar for walls Sopro DMB 091 Sealing collar for oors
nd

Sopros No. 1 exible tile adhesive or FKM XL 444 Highly- exible tile adhesive
Grouting
Product-systems
Sopro Saphir 5 water-repellent tile grout or Sopro DF 10
Sanitary Silicone
120 Tile xing

products
Reaction-resin waterproong system

Chemically resistant waterproof membrane beneath ceramic coverings, e. g. in swimming pools, catering kitchens etc.
Substrate
Screeds or plasterwork (sand-blinded)
Priming (sand-blinded)
EPG 522 epoxy primer
1st waterproof coat
sand-up with Sopro QS 507 fein 0,1 0,3 mm QS 507
2nd waterproof coat (sand-blinded)
Waterproong
PU-FD surface sealant
sand-blinded with Sopro QS 511 Coarse silica sand 0,4 0,8 mm
Combed bed
DBE 500 epoxy tile adhesive
Grouting
Sopro FEP 3-component epoxy tile grout or SoproDur HF 8 tile grout
Accessories
Product-systems
FDB 524 exible sealing tape
SoproDur HF-D 817 Sealant
121
AEB waterproong and separating system

Waterproong and separating membrane to critical substrates in bathroom
Substrate
Gypsum plasterboard Timber substrate
GD 749 primer HPS 673 bonding primer

Sopros No.1 exible tile adhesive
Waterproong
AEB 640 waterproong and separating membrane Sopro AEB 644/645 wall/oor collars Racox universal adhesive or TDS 823 turbo sealing slurry

Sopros No. 1 exible tile adhesive
Product-systems
Grouting
Sopro Saphir 5 Sopro Brillant water-repellent tile water-repellent tile grout or Sopro DF 10 grout
122 Tile xing

products
AEB plus waterproong and separating system

Waterproong and separating system for outdoor use on balconies and patios
Substrate
Screed Existing tile covering
GD 749 primer HPS 673 special bonding primer MEG 666 megaFlex S2 turbo adhesive

VF 419 adhesive
Waterproong
AEB plus 639 waterproong and separating membrane AEB 641 sealing tape Racox universal adhesive or TDS 823 turbo sealing slurry

MEG 665 megaFlex S2 adhesive MEG 666 megaFlex S2 turbo adhesive
Sopro DF 10
123
Product-systems
Grouting
Floor heating system

Reliable tile laying over electric oor heating systems
Substrate
Screed
GD 749 primer

Sopros No.1 exible tile adhesive or VarioFlex XL 413 tile adhesive
Separating layer
Sopro FDP 558 Tile insulation board
Electric heating element

EFH 569 electric oor heating

Sopros No.1 exible tile adhesive or VarioFlex XL 413 tile adhesive
Product-systems
Grouting
Sopro FL highly exible tile grout or Sopro DF 10
124 Tile xing

products
Impact sound insulation and separating layer system

Impact sound insulation and separating system below natural stone and ceramic coverings
Substrate
Existing tile covering Concrete
HPS 673 bonding primer GD 749 primer
Surface lling
FS 15 plus oorlevelling compound

Sopros No. 1 adhesive or VF 419 adhesive
Impact sound insulation/separating layer

TEB 664 impact sound insulation and separating layer
17dB*
up to

MFK 446 adhesive VF 419 adhesive
Grouting
Sopro Brillant or Sopro DF 10
Product-systems
* Prfstandswert nach DIN EN ISO 140-8, der zur Orientierung dient. Das sich tatschlich am Objekt zu realisierende Trittschallverbesserungsma ist durch eine Probeverlegung und Probemessung festzustellen.
125
Impact sound insulation system

Impact sound insulation and separating system below ceramic tile coverings
Substrate
Timber oorboards

VarioFlex 419 adhesive
Impact sound insulation/separating layer
TDP 565 impact sound insulation board

16dB*
up to
FDP 558 tile insulation board

11dB*
up to

VarioFlex 419 adhesive
Product-systems
Grouting
Sopro DF 10 or Brillant water-repellent tile grout
126 Tile xing

products
* The impact sound reduction is tested according to DN EN ISO 140-8. The performance of trial installations and measurements is recommended, in each case, to establish the actual sound reduction index achievable on site.
Separating layer system

Trouble-free tile laying on critical substrates
Substrate
Cement screed with cracks Timber oorboards
GD 749 primer HPS 673 special primer
Bonding
m 4m m 9m
Sopros No.1 exible FKM 555 rapid-set tile adhesive exible tile adhesive
Separating layer
FDP 558 tile insulation board
11dB*
up to
Laying
Grouting
Benets of tile insulation board

I Forms stiffening, stress-free intermediate layer over deformationsensitive substrates I Sound and thermally insulating I Formaldehyde-free
* The impact sound reduction is tested according to DN EN ISO 140-8. The performance of trial installations and measurements is recommended, in each case, to establish the actual sound reduction index achievable on site..
127
Product-systems
Multi-purpose primer system

Laying of large-format fully vitri ed stoneware units on calcium sulphate-based substrates
Substrate
Calcium sulfate-based screed
GD 749 primer
Surface lling
AFS 561 anhydrite oorlevelling compound
MGR 637 Multi-purpose primer (sand-up with Sopro QS 511 Coarse silica sand 0,4 0,8 mm)
(sand-up)

VarioFlex XL 413 tile adhesive
Product-systems
Grouting
128 Tile xing

products
Epoxi primer sealer system

Laying of coverings on damp bonded scr eeds
Substrate
Concrete
Screed
Bonded screed
1st coat ESG 868 epoxy primer sealer (sand-up Sopro QS 511 Coarse silica sand 0.4 0.8 mm)
2nd coat (sand-up with coarse silica sand)

MDM 888 medium-/ VarioFlex HF 420 thick-bed tile exible tile adhesive adhesive
Sopro DF 10 or Sopro Saphir M waterrepellent marble grout
129
Product-systems
Grouting
Swimming pool render system

Rendering, patching and levelling of swimming pools to ZDB swimming pool construction data sheet
Substrate
Concrete
Sopro GD 749 primer
Bonding layer
Levelling
Sopro SBP 474, primed with Sopro GD 749
Waterproong
1 waterproong coat
st
Sopro DSF 423, Sopro DSF 523, Sopro DSF 623, Sopro TDS 823
2nd waterproong coat
3rd waterproong coat

(Sopro recommendation in submerged areas)

Product-systems
Grouting
SoproDur HF 8 or SoproDur HF 30
130 Tile xing

products
Sopro Topas DFE designer epoxy tile grout system
Decorative grouting of glass mosaic, offering high aesthetic appeal

Grouting
Sopro Topas DFE
Grouting
Sopro Topas DFE + silver glitter (order no. 1020)
Grouting
Sopro Topas DFE + gold glitter (order no. 1019)
131
Product-systems
Index of contents

Tile adhesives
page
2 27 20 19 20 27 28 51 49 50 51 52 61 62 66 66 67 78 79 84 84 85 94 95 96 99
Tile grouts

100 105 106 131

page
134 148 149 153 154 155 156 157 158 167 168 170 171 176 177 179

page
182 185 186 191 190 191 192 194 195 196 197 199 200 205 206 207 208 209 210 213 211 214
Bitumen, Dichtungsschlmmen, Verkieselung
Bitumen products
Product description
Sopro BE 755
Bitumen emulsion
Solvent-free bitumen emulsion as proofing and protective coating for concrete, plaster and clay, lightweight and aerated concrete masonry. For dry and slightly damp substrates.

For indoor and outdoor use Resistant to diluted acids and alkaline solutions Compatible with cement and lime Sprayable Straightforward application
Packaging
Coverage: 150 200 g/m per coating
Hobbock 30 kg Bucket 10 kg Bucket 5 kg
Sopro KDG 751

Primer for basement waterproofing
co
ent nc ra
Solvent-free, bitumen-emulsion-based primer concentrate for thinning with water before use. Used as primer on mineral substrates for subsequent treatment with Sopro KD 752 onecomponent waterproof basement coating, Sopro KSP 652 waterproof basement coating and Sopro KD 754 two-component waterproof basement coating. No flammable or harmful vapours when applied.

di
lu t
e d w ith w
Coverage 200 300 g/m (concentrate thinned with water)
te
r1 : 1 0!
te
For outdoor use High coverage as thinnable with water up to a proportion of 1 : 10 For roller, brush or spray application Straightforward application
Sopro KDV 681

Primer for basement waterproofing
m u st
be
Universal, ready-to-use, low-odour, solvent-free, bitumen emulsionbased primer, compliant with DIN 18 195 Part 2. For pretreatment of absorbent and mineral substrates prior to application of Sopro KSP 652, Sopro KD 752, Sopro KD 754, Sopro KMB 650 and Sopro KMB 651 waterproof bitumen coatings.

For indoor and outdoor use Ready-to-use Straightforward application Adhesion promoter For brush, roller or spray application
Coverage 100 200 g/m
Packaging Hobbock 30 ltr Bucket 10 ltr
134 Building
chemical products
Bitumen products
Product description
Sopro BVA 759

Bitumen primer
Ready-to-use, quick-drying, one-component, solvent-free bitumen primer for substrate preparation prior to application of bitumen, roof and torch-on sheet membranes. Also suitable as adhesion-promoting primer prior to application of Sopro BIS 766 bitumen filler, Sopro BKK 660 cold-applied bitumen adhesive and Sopro BDL 661 bitumen roof paint. Ideal for application to old bitumen coatings and sheet membranes. May also be applied to concrete, flush-jointed masonry and render.

Drying time: approx. 15 minutes Used to promote adhesion Cold-applied Ready-to-use, good workability For roller, brush and spray application
Coverage 150 200 ml/m per coat
SoproThene primer
Order no. 879
Special high-grade, low-odour, ready-to-use, solvent-free, bitumen emulsion-based primer. For preparation of mineral substrates for subsequent waterproofing with SoproThene bitumen sheet membrane. Improves adhesion to substrate.

For indoor and outdoor use Drying time: approx. 45 minutes For dry and slightly damp substrates Promotes adhesion For roller, brush and spray application Ready-to-use, straightforward application
Packaging Bucket 10 ltr Bucket 5 ltr
135
Bitumen products, sealing slurries and silification
Bitumen products
Load cases to DIN 18 195
DIN 18 195 Loadcase
Ground moisture and non-accumulating seepage water
Membrane application
2 coats
Minimum dry coat thickness

3 mm
Part 4
Part 5
Water without hydrostatic pressure, moderate duty
2 coats plus scrim incorporated at internal/ external angles
3 mm
Part 6
Accumulating seepage water, external water pressure
2 coats plus scrim incorporated
4 mm
Note: DIN 18 195 Part 5 and DIN 18 195 Part 6 make no provision for the use of polymer-modied bitumen coatings for the load cases water without hydrostatic pressure heavy duty and external water pressure (groundwater, immersion depth 3 m). The Employer/Client shall be expressly advised of this departure from DIN 18 195 by the Contractor. The installation of waterproof membranes for these load cases shall be subject to a separate contractual agreement and shall be clearly and individually stated in the specication/bill of quantities in accordance with DIN 18 336/VOB (German Construction Contract Procedures), Part C, Section 0.3.
Product description
Sopro KD 752
One-component waterproof basement coating
One-component, solvent-free, polymer-modified bitumen coating with polystyrene foam filler used to produce flexible, crackbridging waterproof membranes for basements to DIN 18 195 (08/2000 edition). Provides barrier against ground moisture and non-accumulating seepage water under ground slabs and on walls (DIN 18 195 Part 4), against water without hydrostatic pressure on floors and in wet areas (DIN 18 195 Part 5), and against external water pressure and accumulating seepage water (DIN 18 195 Part 6). For horizontal waterproof membranes incorporated within structural elements, for waterproof barriers in cellars and buildings without basements below protective layers. Also suitable as adhesive for bonding protective, drainage and insulation panels in buried areas.

For indoor and outdoor use For trowel and spray application Waterproof Crack-bridging Heat and cold resistant Resistant to all aggressive natural substances normally encountered in and on structures
Coverage 3.7 4.9 ltr/m depending on load case
136 Building
chemical products
Bitumen products
Product description
Sopro KD 754
Two-component waterproof basement coating
Two-component, solvent-free, polymer-modified bitumen coating with polystyrene foam filler used to produce flexible, crackbridging waterproof membranes. Provides barrier against ground moisture and non-accumulating seepage water under ground slabs and on walls (DIN 18 195 Part 4), against water without hydrostatic pressure on floors and in wet areas (DIN 18 195 Part 5), and against external water pressure and accumulating seepage water (DIN 18 195 Part 6). For horizontal waterproof membranes incorporated within structural elements, for waterproof barriers in cellars and buildings without basements below protective layers.

onent comp ged r e d Pow packa r ately separ n containe withi
For indoor and outdoor use For trowel and spray application Excellent sag resistance Rainproof after only short time Quickly dries through Waterproof Crack-bridging Heat and cold resistant
Coverage 3,5 4,6 ltr/m depending on load case
Packaging
Packages per pallet
Pallet weight
Hobbock 30 l (21,7 kg) 18 391 kg (liquid component 24 l (15,7 kg) + powder component 6 kg, separately packaged within container)
Sopro KSP 652

Waterproof basement coating
Rapid-drying, one-component, solvent-free, polymer-modified bitumen coating with polystyrene foam filler used to produce flexible, crack-bridging waterproof membranes for basements to DIN 18 195 (08/2000 edition). Provides barrier against ground moisture and non-accumulating seepage water under ground slabs and on walls (DIN 18 195 Part 4), against water without hydrostatic pressure on floors and in wet areas (DIN 18 195 Part 5), and against external water pressure and accumulating seepage water (DIN 18 195 Part 6). For horizontal waterproof membranes incorporated within structural elements, for waterproof barriers in cellars and buildings without basements below protective layers. Also suitable as adhesive for bonding protective, drainage and insulation panels in buried areas.

hort Very s mes t g- i dryin ge overa high c
For indoor and outdoor use For trowel and spray application Fully dried through and rainproof after only short time Low coat thickness loss through drying Low compressive strain through earth pressure High coverage Waterproof Crack-bridging Heat and cold resistant Resistant to all aggressive natural substances normally encountered in and on structures
Test certificates Available upon request Coverage 3.5 4.6 ltr/m depending on load case
Packaging Hobbock 30 ltr Packages per pallet 18 Pallet weight 357 kg
137
Bitumen products
Product description
Sopro KMB 650

One-component flexible bitumen coating
One-component, solvent-free bitumen coating used to produce flexible, crack-bridging waterproof membranes to DIN 18 195 (08/2000 edition). Provides barrier against ground moisture and non-accumulating seepage water under ground slabs and on walls (DIN 18 195 Part 4), against water without hydrostatic pressure on floors and in wet areas (DIN 18 195 Part 5), and against external water pressure and accumulating seepage water (DIN 18 195 Part 6). For horizontal waterproof membranes incorporated within structural elements and as adhesive for bonding protective, drainage and insulation panels in buried areas.

For indoor and outdoor use Ready-to-use, good workability Sprayable For roller and brush application For bonding insulation board Waterproof Crack-bridging Heat and cold resistant Resistant to aggressive waters occurring naturally in ground that are liable to attack concrete
Coverage 4.5 5.5 kg/m depending on load case
Packaging Hobbock 30 kg
Sopro KMB 651

Two-component flexible bitumen coating
Two-component, solvent-free, fibre-reinforced, polymer-modified bitumen coating used to produce flexible, crack-bridging waterproof membranes to DIN 18 195 (08/2000 edition). Provides barrier against ground moisture and non-accumulating seepage water under ground slabs and on walls (DIN 18 195 Part 4), against water without hydrostatic pressure on floors and in wet areas (DIN 18 195 Part 5), and against external water pressure and accumulating seepage water (DIN 18 195 Part 6). For horizontal waterproof membranes incorporated within structural elements and as adhesive for bonding protective, drainage and insulation panels in buried areas.

t ponen r com kaged e d w Po pac r ately separ n containe withi
For indoor and outdoor use For trowel and spray application Excellent sag resistance Rainproof after only short time Quickly dries through Waterproof Crack-bridging Heat and cold resistant Resistant to all aggressive natural substances normally encountered in and on structures
Coverage 4.3 5.8 kg/m depending on load case
Packaging
Packages per pallet
Hobbock 30 kg 18 (liquid component 22 kg + powder component 8 kg, separately packaged within container)
138 Building
chemical products
Bitumen products Basement waterproong with Sopro KSP 652 bitumen coating
Sopro KDG 751 primer concentrate Sopro KDV 681 primer
Repair joints with Sopro AMT 468
Masonry dpc (Sopro TDS 823 as alternative)
Sopro TDS 823 at plinth
Sopro TDS 823 damp-proof course
Sopro KDS 663 drainage and protective layer
Second coat of Sopro KSP 652
Embed Sopro KDA 662 scrim in first coat
First coat of Sopro KSP 652
Sopro AMT 468 angle fillet
Sopro TDS 823 wo-component turbo sealing slurry
Sopro AMT 468 Sopro KDG 751 Sopro KDV 681 levelling mortar with primer concentrate for primer for basement trass basement waterproong waterproong
Sopro KSP 652 Sopro KDA 662 Sopro KDS 663 waterproof basement scrim for basement basement drainage coating waterproong mat
139
Bitumen products
Product description
SoproThene
Bitumen sheet membrane
Self-adhesive, flexible, crack-bridging bitumen sheet membrane comprising polymer-modified bitumen on tear-resistant carrier film. Used to produce flexible waterproof membranes for basements to DIN 18 195, providing barrier against ground moisture and nonaccumulating seepage water under ground slabs and on walls (DIN 18 195 Part 4) and against water without hydrostatic pressure on floors and in wet areas (DIN 18 195 Part 5). Likewise used for horizontal waterproof membranes incorporated within structural elements. For waterproofing external basement walls, balconies and patios. Substrates shall be pretreated with SoproThene primer.

For indoor and outdoor use, walls and floors Flexible and crack-bridging Self-adhesive Immediately waterproof and resistant to driving rain Application temperature: -5 C to +30 C

Packaging Packages per pallet 15 24 45 90 Pallet weight approx. 365 kg approx. 204 kg approx. 342 kg approx. 342 kg Roll 15 m (100 cm wide) Roll 5 m (100 cm wide) Roll 15 m ( 30 cm wide) Roll 15 m ( 15 cm wide)
SoproThene
Corner tape
Self-adhesive, flexible, crack-bridging, polymer-modified bitumen corner tape applied to a tear-resistant carrier film. Coated with two 50 mm wide vulcanization strips comprising a pure bitumen compound. For use in conjunction with SoproThene bitumen sheet membrane for reliable sealing at corners, internal/external angles and ground slab/basement wall junctions.
SoproThene
Adhesive tape
Self-adhesive, tear-resistant adhesive tape comprising polythene carrier film coated on both sides with strongly adhesive bitumen-rubber compound, for reliable sealing of corners and complicated details such as pipe penetrations, edges, floor outlets, in conjunction with SoproThene bitumen sheet membrane. Also suitable for fixing insulation or drainage mats onto SoproThene bitumen sheet membrane.
SoproThene
Nonwoven edging tape
Self-adhesive, crack-bridging, butyl-rubber-based universal sealing tape used in conjunction with SoproThene bitumen sheet membrane for sealing upper vertical terminations and horizontal terminations of membrane. The outer side is faced with a synthetic nonwoven to provide good plaster key or as base for adhesivefixed finishes.
SoproThene
Aluminium edging tape
Self-adhesive, UV-resistant aluminium edging tape coated with strongly adhesive bitumen-rubber compound and used in conjunction with SoproThene bitumen sheet membrane for sealing upper vertical terminations and horizontal terminations of membrane.
140 Building
chemical products
Bitumen products
Product description
Sopro BIS 766

Bitumen filler
Used for waterproofing structures in contact with ground (to AIB) to provide barrier against ground moisture and non-accumulating seepage water. Applied to cellar/basement walls and to foundations. Also suitable for waterproofing and maintenance of bituminous roof coverings to protect against damp and wetness, and for repairing and sealing defects at openings, terminations and pipe penetrations. Suitable substrates are: concrete, masonry, plaster, metal, wood, surfaces with old bitumen coatings and bituminous roof sheet membranes.

For outdoor use Weatherproof Sag-resistant with good adhesion Fibre-reinforced For spatula application Solvent-free
Packages per pallet 60 384 Pallet weight 300 kg 384 kg
Packaging Bucket 5 kg Pot 1 kg (Nr 15 in box)
Sopro BKK 660

Cold-applied bitumen adhesive
Ready-to-use cold-applied bitumen adhesive for bonding bitumen roof sheet membranes and waterproofing old and new bitumen roofing felt. For brush or spatula application to concrete, plaster or heat and cold-resistant bitumen roofing felt. Sopro BKK 660 adhesive can be cold-applied by spatula and is viscoplastic after evaporation of the solvent. Only for flatroofs with a roofslope of max. 5.

For outdoor use Heat-resistant, no embrittlement, no flaking Waterproof and weather-resistant Resistant to diluted acids, alkaline solutions, salts, aggressive natural substances etc. Solvent-free
Coverage: 300 500 g/m
Sopro BDL 661

Bitumen roof paint
Ready-to-use, rapid-drying proofing and protective coating for old and new bitumen roofing felt, bitumen shingles, mineral roof coverings, wood and metal roofing and old bitumen coatings.

For outdoor use Heat-resistant, no embrittlement, no flaking Water-repellent and weather-resistant May be applied cold For roller, brush or spray application Solvent-free
141
Bitumen products
Product description
Sopro KDA 662

Scrim for basement waterproofing
Bitumen- and alkali-resistant, plastics-sheathed glass-fibre fabric used as reinforcement and to regulate coat thickness for flexible, crack-bridging waterproof bitumen basement coatings applied as barrier against external water pressure and accumulating seepage water to DIN 18195 Part 6. Used with Sopro KSP 652 waterproof basement coating, Sopro KD 752 one-component and Sopro KD 754 two-component waterproof basement coatings, Sopro KMB 650 one-component and Sopro KMB 651 two-component flexible bitumen coatings.

For indoor and outdoor use Mesh size 4 x 4 mm Water- and weather-resistant For reinforcement of internal/external angles For improved crack bridging Straightforward application
Packaging Roll 50 m (100 cm wide) Roll 50 m ( 50 cm wide)
Pallet weight approx. 256 kg approx. 242 kg
Sopro KDS 663

Basement drainage mat 6 mm
Bitumen-compatible, polystyrene drainage and protective mat with load-spreading sheet backing and compression-resistant polypropylene nonwoven filter. Ideal for protection of Sopro KSP 652, Sopro KD 752 and Sopro KD 754 waterproof basement coatings, Sopro KMB 650 and Sopro KMB 651 flexible bitumen coatings and SoproThene bitumen sheet membranes. The load-spreading sheet backing guarantees reliable protection even in the event of subsequent floor movement or settlement. Meets requirements for protective layers to DIN 18 195 (Part 10) and for drainage provision for protection of construction works to DIN 4095. Also complies with guidelines for design and installation of waterproof polymer-modified bitumen coatings.

Withstands high compressive loads Protects against damaging action from ground Reliable vertical drainage Resists clogging Rotproof Resistant to chemicals commonly encountered in ground CE conformity marking to DIN EN 13 252 Stud height approx. 6 mm Size 1.25 14 m (17.5 m)
142 Building
chemical products
Bitumen products
Product description
Sopro KDB 756

Sealing tape for basement waterproofing
Elastic, nonwoven-faced, bitumen-emulsion-based sealing tape for bridging structural joints in conjunction with Sopro KD 752 one-component waterproof basement coating, Sopro KSP 652 waterproof basement coating and Sopro KD 754 two-component waterproof basement coating.
Mixing attachment for bitumen

Order no. 018
Mixing attachment with a hexagon rod for mixing waterproof bitumen coatings, e. g. Sopro KD 752 one-component waterproof basement coating, Sopro KSP 652 waterproof basement coating and Sopro KD 754 two-component waterproof basement coating. Suitable for fitting to drill. Size: 160 160 600 mm
Packaging Unit
Sopro S 635
Oil barrier
Ready-to-use, special, synthetic resin paint for sealing and coating bunds, catchpits and catchment spaces for light heating oil, diesel fuel and unused engine and gear oils in private and all commercial spaces. Facilitates pumping or wiping off of leakages from coated surface.

For indoor use For walls and floors Crack-bridging Rapid-drying Ready-to-use One-component Two colours to differentiate between coatings
Colours: Order no. 635 grey
Order no. 636 red-brown
Coverage approx. 1 ltr/m
143
Sealing slurries
Sopro DSF 523 one-componet exible sealing slurry:
Dependable protection against moisture damage.
For seamless waterproof membranes One-component, exible and crack-bridging For sanitary facilities and wet areas For balconies and patios For swimming pools and process water tanks Water-vapour-permeable For roller, trowel, brush and spray application
144 Building
chemical products
Sealing slurries
Product description
Sopro DSF 523


Sopro DSF 623


145
Sealings slurries
Product description
Sopro DSF 423


Packages per pallet

NEW NEW
40 40
Sopro TDS 823

MicroGumTechnology

Packaging
Bag 10 kg with powder Component A Canister 10 kg with liquid Component B Bag 4.5 kg with powder Component A Canister 4.5kg with liquid Component B
146 Building
chemical products
Sealings
Product description
Sopro DS 422
Sealing slurry
Cementitious sealing slurry used to provide waterproof barrier against surface and seepage not subject to hydrostatic pressure on masonry, concrete and plasterwork. Used for new-build and refurbishment schemes in building construction and civil engineering, and process water tanks with max. 5 m water depth.

Coverage 3 6 kg/m depending on application and duty
Packaging Bag 25 kg
Sopro Racofix WSM 680

Water-stop mortar
Cementitious water-stop mortar used to plug water leaks, e. g. in basements and shafts, and burst pipes. Especially useful against water pressure. When mixed with water, Racofix water-stop mortar forms a plastic, thixotropic and easily applicable paste. Particularly suitable for plugging drillholes following installation of Sopro VK 690 injection damp-proof course.

Plugs water leaks in seconds Sets within 90 seconds High water impermeability Chloride-free
Coverage 1.8 kg mortar for 1 ltr void
Sopro FAD 712

Facade impregnation agent
One-component, solvent-free siloxane compound for watervapour-permeable impregnation of mineral facade materials, plasters/renders, limestone, clay brickwork/blockwork, unglazed clinker and fibre-cement products, mineral paintwork, to protect against driving rain.

For outdoor use only For roller, brush or spray application
Coverage: 0.1 0.5 ltr/m
Packaging Canister 6 ltr Pot 1 ltr (Nr 6 in pack)
147
Silification
Product description
Sopro BLS 689

Drill hole grout
Horizontal damp-proof course*. For filling voids and fissures in substrate. Also serves as accelerator for Sopro VK 690 injection damp-proof course and for plugging drill holes after installation. Suitable for all types of mineral building fabric, e.g. masonry, concrete, stone and rock.

For indoor and outdoor use For prevention of rising damp* For protection against efflorescence* For prevention of damp masonry*
Coverage: approx. 1.0 kg/l void
Packaging Box 30 kg (6 5 kg bags)
Sopro VK 690
Injection damp-proof course
Solvent-free, one-component damp-proofing concentrate based on special silicates and water-repellent additives. Injected into existing structures to provide horizontal damp-proof course to protect against rising damp in masonry. Also suitable as a surface coating for impregnation of absorbent building materials and for surface preparation prior to plastering and painting. For the permanent drying out of damp walls.

For indoor and outdoor use Prevents rising damp Prevents efflorescence Prevents damp masonry
Coverage approx. 2.5 kg per metre and 10 cm wall thickness, depending on masonry suction
Packaging Canister 30 kg Canister 10 kg Canister 3 kg Funnel bottle 0,5 ltr (Nr 30 in box)
Sopro VKT 020

Damp-proof course injection funnel
Injection funnel for Sopro VK 690, which is incorporated as horizontal damp-proof course in existing structures to protect against rising damp in masonry. Used in conjunction with Sopro VK 690 injection damp-proof course for the permanent drying out of damp walls in basements/cellars, shafts, basement car parks, water containers and sewers. Suitable for masonry, concrete, stone and rock. Strengthens and preserves original building fabric and durably prevents efflorescence and mould.

For indoor and outdoor use Prevents rising damp Prevents efflorescence Prevents damp masonry
Coverage 7 24 funnels per metre, depending on wall thickness
Packaging Box with 20 funnels
148 Building
chemical products
* In conjunction with Sopro Injection damp-proof course.
Screeds
Product description
Sopro Rapidur B1
Rapid-set screed binder Order no. 760
es
ted t
CT-C50-F8
N
E N 13 8
YS CR TAL
LI
NE
Special polymer-modified binder for production of high-strength, rapid-set cement screeds based on DIN 18 560 allowing early flooring installation. Suitable for producing grade CT-C50-F8 cement screeds to DIN EN 13 813. Depending on aggregate quality and mixing ratio (sand : Rapidur B1 : water), higher-grade screeds can also be produced. For further details, please consult our technical product information. Suitable for heated screeds, bonded screeds, unbonded screeds and floating screeds. Particularly useful for fast-track or tightly scheduled screed laying. Site-mixed with 0 8 mm gravel sand for screeds.
13
TE
R BIN D
Coverage approx. 3.5 kg/m per cm coat thickness approx. 14 kg/m for 4 cm screed thickness (mixing ratio = 1 : 4 1 : 5) approx. 350 kg/m 2 bags per 200 l-mixing maschine
Ready to receive floor covering: after approx. 12 hours for subsequent tiling, after approx. 24 hours or achievement of moisture content 1.8 % CM for particularly impervious floor coverings, e. g. linoleum, PVC etc. and wood or parquet flooring For indoor and outdoor use Working life: approx. 60 minutes Walkable: after approx. 3 hours Suitable for floor heating systems Pumpable Adapted perimeter insulation stripe on page 81 Low-chromate to Regulation 1907/2006 EC, Annex XVII
HI G
Packaging Bag 25 kg
Sopro Rapidur B5
Rapid-set screed binder Order no. 767
es
ted t
CT-C60-F7
N
E N 13 8
Special polymer-modified binder for particularly economical production of high-strength, rapid-set cement screeds based on DIN 18 560 allowing early flooring installation. Suitable for producing grade CT-C60-F7 cement screeds to DIN EN 13 813. Depending on aggregate quality and mixing ratio (sand : Rapidur B5 : water), higher-grade screeds can also be produced. For further details, please consult our technical product information. Suitable for heated screeds, bonded screeds, unbonded screeds and floating screeds. Particularly useful for fast-track or tightly scheduled screed laying. Site-mixed with 0 8 mm gravel sand for screeds.
13
Coverage approx. 3,5 kg/m per cm coat thickness approx. 14 kg/m for 4 cm screed thickness (mixing ratio = 1 : 5 1 : 6) approx. 350 kg/m 2 bags per 200 l-mixing maschine
Ready to receive floor covering: after approx. 3 days for subsequent tiling, after achievement of moisture content 1.8 % CM for particularly impervious floor coverings, e. g. linoleum, PVC etc. and wood or parquet flooring For indoor and outdoor use Working life: approx. 2 hours Walkable: after 6 10 hours Suitable for floor heating systems Pumpable Adapted perimeter insulation stripe on page 81 Low-chromate to Regulation 1907/2006 EC, Annex XVII
Packaging Bag 25 kg
* Mixing ratio 1 : 4 (25 kg Rapidur B1/Rapidur B5 : 100 kg gravel sand 0 8 mm, according to DIN EN 12 620), watr/cement ratio 0,4.
149
Screeds
DI DI
Screeds
Product description
Sopro Rapidur M1
Rapid-set screed mortar Order no. 769
Screeds
es
ted t
Polymer-modified, ready-to-use dry mix, CT-C50-F7 to DIN EN 13813, for production of rapid-set cement screeds allowing early flooring installation. No addition of sand necessary. Suitable for heated screeds, bonded screeds, unbonded screeds and floating screeds. Particularly useful for fast-track or tightly scheduled screed laying.
CT-C50-F7
N
E N 13 8
13
YS CR TAL
LI
NE
HI G
Ready to receive floor covering: after approx. 4 hours for tiling, after approx. 24 hours or achievement of moisture content 1.8 % CM for particularly impervious floor coverings, e. g. linoleum, PVC etc. and wood or parquet flooring. For indoor and outdoor use Working life: approx. 20 30 minutes Walkable: after approx. 3 hours Suitable for floor heating systems Pumpable Adapted perimeter insulation stripe on page 81 Low-chromate to Regulation 1907/2006 EC, Annex XVII
TE
R BIN
DI
Coverage 18 20 kg/m per cm screed-thickness 1,800 2,000 kg/m
Sopro Rapidur M5
ted t
CT-C40-F6
N
E N 13 8
13
Coverage 18 20 kg/m per cm screed-thickness 1,800 2,000 kg/m
DI
W
Packaging Bag 25 kg
Polymer-modified, ready-to-use dry mix, CT-C60-F7 to DIN EN 13 813, for particularly economical production of rapid-set cement screeds allowing early flooring installation. No addition of sand necessary. Suitable for heated screeds, bonded screeds, unbonded screeds and floating screeds. Particularly useful for fast-track or tightly scheduled screed laying.
es
Ready to receive floor covering: after approx. 24 hours for tiling, after achievement of moisture content 1.8 % CM for particularly impervious floor coverings, e. g. linoleum, PVC etc. and wood or parquet flooring. For indoor and outdoor use Working life: 40 60 minutes Walkable: after approx. 12 hours Suitable for floor heating systems Pumpable Adapted perimeter insulation stripe on page 81 Low-chromate to Regulation 1907/2006 EC, Annex XVII
DI
Packaging Bag 25 kg
150 Building
chemical products
Screeds
Product description
NEW
Rapidur FE 678
T
es
ted t
E N 13 8
YS CR TAL
LI
NE
TE
R BIN D
Ready for tiling: after approx. 24 hours Self-levelling Coat thickness for bonded screeds: 20 70 mm Coat thickness for unbonded screeds: 35 70 mm For indoor use Working life: 60 90 minutes Walkable: after 3 4 hours Ideal for renovation and refurbishment Suitable for floor heating systems Pumpable Low-chromate to Regulation 1907/2006 EC, Annex XVII
HI G
Coverage approx. 22 kg/m per cm screed thickness; approx. 2,200 kg/m finished screed
Packaging Bag 25 kg
Sopro EE 771
Epoxy mortar
T
es
ted t
SR-C60-F15
N
E N 13 8
Solvent-free, pigmented, ready-mixed, rapid-set, two-component, epoxy-based reaction resin mortar. Exceptionally high abrasion resistance, compressive, tensile bending and pull-off strength. Particularly suitable for production of thin bonded/unbonded filler coats and levelling coats to falls with large differences in thickness. Also suitable as repair mortar for quick repair of wall and floor surfaces. For capillary-breaking joints around pool perimeter and capillary-breaking fillings at junctions with floor drains/wall penetrations.

13
Ready to receive floor covering: after approx. 24 hours SR-C60-F15 after only 3 days For indoor and outdoor use, for walls and floors Working life: approx. 60 minutes Walkable: after approx. 12 hours
Coverage approx. 1.7 kg/m per mm coat thickness
NEW
Sopro DRM 653

Drainage mat 8 mm

For outdoor use Reliable horizontal drainage underneath Sopro DRM 610 drainage mortar Low construction height (8 mm) High compressive strength Size 1 m 15 m
Packages per pallet 6 Pallet weight approx. 60.5 kg
Packaging Roll 12.5 m (100 cm wide)
151
Screeds
CT-C25-F5
13
Polymer-modified ready-to-use dry mix for production of rapid-set cement screeds allowing early flooring installation. Grade CTC25-F6 to DIN EN 13813. Suitable for heated screeds, bonded screeds and unbonded screeds (on separating or insulation layer). Used as base for all types of floor covering, e.g. ceramic, natural stone, textile and elastic flooring. Particularly useful for fast-track or tightly scheduled screed laying.
DI
W
DI
Screeds
Product description
Sopro DM 610
Drainage mortar
Screeds
CT-C25-F4
N
E N 13 8
es
ted t
Trass cement-bonded bedding mortar for laying natural stones, pavers, flags and tiles in outdoor areas. Due to grading curve, a highly-waterpermeable mortar bed is achieved which has virtually no capillary suction, thereby effectively preventing water damage, such as efflorescence and structural damage caused by frost, on balconies, patios, stairs, landings and other external areas. Drainage performance may be increased by installation of Sopro DRM 653 drainage mat. The covering material is laid wet-on-wet using Sopro HSF 448 or Sopro HSF 748.

13
Coverage approx. 16 kg/m per cm coat thickness
Sopro TRB 421

Binder with trass
Coverage 3.5 4.0 kg/m for 1 cm mortar bed thickness (mixing ratio 1 : 4)
DI
enish Rh
Trass
or
igin
al
Ready to receive floor covering: after approx. 3 days For floors, indoors and outdoors Very high water permeability Very good workability Pumpable For laying on mortar beds with min. 2 cm coat thickness Low-chromate to Regulation 1907/2006 EC, Annex XVII
Packaging Bag 25 kg
Bonding agent
enish Rh
Trass
or
i g i n al
Special trass-bearing, cementitious binder for preparation of thickbed adhesives, wall tile adhesives and drainage mortars. For preparation of smooth, easily workable, highly resistant and dense mortars for indoor and outdoor use, particularly suitable for laying sensitive, discoloration-prone natural stone coverings. For ceramic tiles and coverings, terracotta and cast stone units. High trass content significantly reduces risk of efflorescence, bloom and discoloration. Incorporation of Sopro DRM 653 drainage mat is recommended to further enhance drainage performance. Requires mixing on site with (04 mm graded) sand or (08 mm graded) screed sand. Drainage mortar may be produced by mixing with 25 mm, 58 mm or 812 mm graded quality chippings or 48 mm graded rounded aggregate.

Packaging Bag 25 kg
152 Building
chemical products
Screeds
Product description
SoproDur HF-L 513

Protective coat
stone grey RAL 7030*
For indoor and outdoor use High abrasion resistance Solvent-free Chemical-resistant Straightforward application For roller, brush and spray application Blind with silica sand for slip-resistant finish Working life: 30 40 minutes stone grey RAL 7030*
Colour:
Coverage 300 400 g/m per coat; two coats required
Packaging Bucket, Component A 4 kg + Bottle, Component B 1 kg
Sopro RH 646
Crack resin
Two-component, flow-applied polyester resin for structural bonding of cracks in screeds and for production of reaction resin mortars for minor repairs.

For indoor and outdoor use For floors Extra-rapid-setting Water- and weather-resistant High mechanical strengths Good bonding properties on concrete and steel
Packages per pallet 360 Pallet weight 360 kg
with 10 cross-dowels
Coverage approx. 1.0 kg/dm
Packaging Pot 1 kg (Nr 4 in box)
Sopro BH 869
Construction resin
Two-component epoxy-resin-based construction resin. As primer and adhesion promoter on all smooth substrates. For production of highly wear-resistant and chemically-resistant mortars on concrete floors and cement screeds. For industrial and hall floors, workshops and spaces subject to high mechanical and chemical loads. Used to produce water-permeable singlesized aggregate mortars for laying of bridge kerbstones. For production of capillary breaking joints in swimming pools.

For floors For indoor and outdoor use Working life: approx. 60 minutes Walkable: after approx. 24 hours For coat thickness of 3 50 mm, depending on used aggregate (silica sand)
Coverage as primer: 250 350 g/m; as resin mortar: 170 210 g/m per mm coat thickness depending on adopted grading curve
Packaging
Packages per pallet
Pallet weight
Bucket 24 kg (16 kg Component A + 8 kg component B) (on request) Bucket 12 kg (combi pack) 30 Bucket 5 kg (combi pack) 60 Pot 1 kg (Nr 6 in box) 288
360 kg 300 kg 288 kg
153
Screeds
Two-component epoxy resin coating for protection of cementitious substrates, such as screeds and concrete surfaces, and finished floor surfaces produced with Sopro HF-S 563 floor-levelling compound, against mechanical and chemical loads. Cures to produce a water- and vapour-proof surface barrier, making it suitable for the treatment of freshly laid screeds; in such cases, priming with Sopro EPG 522 epoxy primer is required.
Mortar and screed additives

Product description
Rapidur EB 5 screed accelerator

Order no. 647
Powder concentrate used to accelerate set of Portland cements and to produce rapid-set screeds allowing early flooring installation. Powder concentrate is suitable for producing grade CTC25-F4 cement screeds to DIN EN 13 813.
l l l l l
Ready to receive floor covering: after 3 5 days for tiling For indoor and outdoor use Working life: approx. 45 minutes Walkable after 6 10 hours Also suitable for heated screeds
Coverage: 1 1.25 kg PE bag for 25 kg bag of Portland cement
Packaging Box 10 kg (8 1.25 kg)
Sopro EPZ 764

Screed plasticizer
Special, highly-concentrated, strongly plasticizing agent for production of site-mixed bonded, unbonded and industrial screeds. Also suitable for heated screeds.
l l l
Facilitates screeding, floating and smoothing Provides for lower water requirement, thus reducing shrinkage and increasing strength For indoor and outdoor use
Coverage 1 (120 ml) double bag per 200 ltr mixing water
Packaging Double plastic bag 120 ml (2 60 ml, nr 50 in box)
NEW
Sopro EVZ 634

Screed retarder
Liquid mortar and screed admixture used to extend working life and retard initial set of cement mortars and screeds. Ideal for producing large areas and for bridging interruptions in operations on site. Also suitable for ready-mixed screeds with long journey to site, particularly during warm season.
l l l
Retardation time adjustable via dosage Increases final strength of screed For indoor and outdoor use
Coverage: 0.2 0.8 % (max. 1.2 %) of cement weight
Packaging Container 1,000 kg Canister 25 kg
Packages per pallet
Pallet weight
Available upon request 24 600 kg
Sopro M 772
Mixing oil
Air-entraining admixture for production of site-mixed plastic, high-workability mortars, concretes and screeds. Increases frost resistance and reduces water permeability.
l l l
Reduces mixing water requirement Lowers suction Increases weather resistance
Coverage 50 125 ml for 50 kg cement
Packaging Canister 10 ltr Canister 5 ltr
154 Building
chemical products
Mortar and screed additives

Product description
Sopro BSO 762

Biological mould oil
Solvent-free, biodegradable concrete release agent for absorbent, non-absorbent and smooth formwork types for production of fairfaced concrete and smooth or textured wall and floor slab units.
l l l l
Ensures smooth, discoloration-free concrete surfaces Ensures formwork remains clean With rust-inhibiting and anti-rot additives for steel and timber formwork Sprayable
Packages per pallet 60 90 Pallet weight 528 kg 396 kg Mortar and screed additives
Coverage depending on type and condition of formwork and application method: 20 40 ml/m (mean value)
Packaging Canister 10 ltr Canister 5 ltr
Sopro MFS 761

Antifreezing admixture for mortar
Chloride-free, liquid mortar admixture to lower freezing point of mixing water and accelerate hydration of mortars, plasters and renders. Enables use of site-mixed cementitious mortars at air temperatures down to -10 C. All standardized cement types can be used. The antifreezing admixture is added to the mixing water in the stated proportion.
l l l l l l
Chloride-free Lowers freezing point of mixing water Accelerates hydration process Facilitates application through plasticizing effect Improves compactability Reduces mixing water requirement
Coverage 1 2 % of cement weight or 250 500 g per 25 kg bag of cement
Packaging Canister 12 kg Canister 6 kg
Sopro DM 763
Waterproofing admixture
Chloride-free, liquid admixture for production of site-mixed cement and lime/cement mortars, plasters and renders with enhanced waterproofing performance and improved workability. Increases resistance to waters aggressive to mortar.
l l l l l l
Reduces mixing water requirement Reduces vulnerability to efflorescence Increases freeze/thaw resistance Increases weather resistance Water vapour diffusion unaffected Reduces risk of mortar segregation
Packages per pallet 60 90 480 Pallet weight 600 kg 450 kg 480 kg
Coverage 1 2 % of cement or cement filler weight
Packaging Canister 10 kg Canister 5 kg Bottle 1 kg (Nr 10 in box)
Sopro HE 449
Bonding emulsion
l l l
Coverage 100 200 g/m as bonding layer 700 2.000 g/m as modifier for 10 mm coat thickness
Packaging Canister 10 kg Canister 5 kg Pot 1 kg (Nr 12 in box)
155
Bedding and multi-purpose mortars

Product description
Sopro FDK 606

Tile- and insulation board adhesive
Cementitious tile and insulation board adhesive, meeting C1 T requirements to DIN EN 12004, for laying and bonding of ceramic tiles as well as foam, cork, peat, wood-fibre etc. insulation board. For masonry facings around bathtubs.

ted t es
E N 12 0
04
C1
For indoor and outdoor use C1: tensile adhesion strength 0.5 N/mm T: thixotropic high sag resistance due to fibre reinforcement Low-chromate to Regulation 1907/2006 EC, Annex XVII
Sopro TVM 858

Sopro PSM 453

Precision block mortar
DI
O
Sopro Bauchemie GmbH Werk: 65203
Packaging Bag 25 kg
inische he
Trass
ri g i n al
Hydraulically setting, trass-bearing, cementitious mortar for laying and bonding of discoloration-sensitive natural stone units (e. g. Solnhofen stone tiles, Jura marble), cast stone units and window sills, using thick-bed method to DIN 18 352, DIN 18 332 and DIN 18 333. For levelling substrates made from cementitious materials, e. g. screeds and concrete, in 10 40 mm mortar beds. Application in conjunction with Sopro HSF 748 flexible bonding slurry with trass.

Packaging Bag 25 kg
Cementitious thin-bed bonding mortar for construction of masonry made of calcium-silicate and aerated concrete units and prefabricated panels to DIN 1053, Part 1 and Part 2.

DIN V 18 580
Test certificates available upon request Quality controlled
Packaging Bag 12 kg
156 Building
chemical products
Bedding and multi-purpose mortars

Product description
Sopro Racofix SGM

Special grout Order no. 745
Special cementitious grout with particularly long fluidity period and high strength profile. Variable grouting height in the range 20 120 mm. For void-free grouting of steel constructions, anchors, columns, machine bases, machine shoes and tracks, hole footings, high-bay shelf columns and precast concrete unit connections. Shrinkage-free due to controlled expansibility.

Sopro Bauchemie GmbH Werk: 65205
220008684-11
MPA NRW
For indoor and outdoor use 0 5 mm grading Working life: 80 90 minutes Grouting height: 2 12 cm Setting start: after approx. 11 hours setting end: after approx. 12 hours Fully loadable: after 7 days Low-chromate to Regulation 1907/2006 EC, Annex XVII
Coverage approx. 2.0 kg/dm
Packaging Bag 25 kg
Sopro SM 976
Chase mortar
Lightweight thermal and sound insulating mortar for filling wall chases and service shafts. May be used as a cementitious levelling layer, e.g. for filling spaces around pipes on structural concrete slabs below floating screed constructions. May be applied by hand or plastering machine.

For indoor use Low-chromate to Regulation 1907/2006 EC, Annex XVII
Coverage 1 bag fills 75 ltr void
Packaging Bag 75 ltr (approx. 13,5 kg)
157
Bedding and multipurpose mortars
Surface fillers
Product description
self-levelling
Sopro FS 5
es
ted t
Cementitious, self-levelling, rapid-set, pourable filler compound for thin-coat application to produce particularly smooth surfaces and as skim coat to fill pores, hairline cracks etc. Ideal as base for textile, elastic and parquet flooring. Castor chair resistant when applied with min. 2 mm coat thickness. Suitable for floor heating systems. Excellent workability and hardened mortar properties thanks to Mikrodur technology. Optimum flow qualities by Superplasticizer (high performance liquefier).

CT-C25-F7
N
EN 1
38
Coat thickness: 0.5 5 mm For floors For indoor use Compressive strength after 28 days: approx. 25 N/mm Flexural tensile strenght after 28 days: approx. 7 N/mm Working life: 30 40 minutes Walkable: after 2 3 hours Adapted perimeter insulation stripe on page 81 Low-chromate to Regulation 1907/2006 EC, Annex XVII
13
HI G
TE
R BIN D
Sopro FS 15 plus
T
ted t
+23
C/
e 0 % r l. h u
After
E N 13 8
13
it y
/5
0%
u rel. h
id
HI G
TE
R BIN D
DI
+2
C
YS CR TAL
LI
NE
CT-C35-F9
DI
id
Packaging Bag 25 kg
es
Pumpable, self-levelling, rapid-set, cementitious universal surface filler with excellent flow properties. Applied in thin coats upwards of 2 mm to level mineral substrates and produce smooth, plane, unbroken subfloor surfaces. Used as base for all types of floor covering, e.g. ceramic, natural stone, textile, elastic and parquet flooring. Suitable for floor heating systems. Excellent workability and hardened mortar properties thanks to Mikrodur technology. Optimum flow qualities by Superplasticizer (high performance liquefier).

hrs. ready to receive ceramic covering
23
Coat thickness: 2 40 mm For floors For indoor use Compressive strength after 28 days: approx. 35 N/mm Flexural tensile strenght after 28 days: approx. 9 N/mm Working life: 30 40 minutes Walkable: after 2 3 hours Ready to receive ceramic covering: after 2 3 hours Adapted perimeter insulation stripe on page 81 Low-chromate to Regulation 1907/2006 EC, Annex XVII
it y
YS CR TAL
LI
NE
158 Building
chemical products
Surface fillers
Product description
self-levelling
Sopro HF-S 563

Floor-levelling compound
es
ted t
CT-C40-F10
N
13
Heavy-duty, pumpable, flow-applied, rapid-set, cementitious floorlevelling compound used to produce finished floor surfaces, e. g. for workshops, factory halls, warehouses/storerooms particularly for trafficking by industrial and fork-lift trucks garages, cellars etc. Also suitable as base for heavy-duty tile and natural stone coverings. Featuring Mikrodur technology for exceptionally high strengths. Outdoors, Sopro HF-S 563 may be finished with Sopro HF-L 513 to improve surface properties. Optimum flow qualities by Superplasticizer (high performance liquefier).

E N 13 8
YS CR TAL
LI
NE
TE
R BIN D
Coat thickness: 4 40 mm, for thickness upwards of 10 mm may be extended with sand, e. g. graded 0 2 mm or 0 8 mm For floors For indoor and outdoor use Compressive strength after 28 days: approx. 40 N/mm Flexural tensile strenght after 28 days: approx. 10 N/mm Working life: 30 40 minutes Walkable: after 2 3 hours Ready to receive floor covering: as finished floor surface: after 24 hours per centimetre coat thickness; for subsequent tiling: after 12 hours Adapted perimeter insulation stripe on page 81 Low-chromate to Regulation 1907/2006 EC, Annex XVII
HI G
Packaging Bag 25 kg
Sopro AFS 561

Anhydrite floor-levelling compound
es
ted t
White, pumpable, flow-applied, self-levelling, rapid-set, alphahemihydrate-based filler used to level out gypsum-based/calcium sulphate-based (anhydrite and self-levelling anhydrite) screeds and board subfloors and to produce smooth, level, unbroken surfaces for subsequent laying of all kinds of flooring, e.g. ceramic, natural stone, textile and elastic coverings. Also for use on mastic asphalt. Suitable for floor heating systems. Optimum flow qualities by Superplasticizer (high performance liquefier).

CA-C25-F7
N
E N 13 8
Coat thickness: 1 30 mm, for thickness upwards of 10 mm may be extended with (e. g. 0 2 mm graded) sand For floors For indoor use Compressive strength after 28 days: approx. 25 N/mm Flexural tensile strenght after 28 days: approx. 7 N/mm Working life: approx. 40 minutes Walkable: after approx. 3 hours Adapted perimeter insulation stripe on page 81 Shrinkage-free
13
Packaging Bag 25 kg
159
Surface fillers, rapid-set mortars, universal adhesive
DI
W
DI
Surface fillers
Product description
self-levelling
Sopro FAS 551

Fibre-reinforced self-levelling filler
Flexible, flow-applied, self-levelling, rapid-set, cementitious, fibrereinforced surface filler used to even out irregularities in timber and mineral substrates, especially on refurbishment/renovation contracts.

ted t es
CT-C30-F7
N
E N 13 8
Coat thickness: 3 25 mm, for thickness upwards of 10 mm must be extended with (e. g. 0 2 mm graded) sand For floors For indoor use Compressive strength after 28 days: approx. 30 N/mm Flexural tensile strenght after 28 days: approx. 7 N/mm Flexible Working life: 2 30 minutes Walkable: after approx. 2 hours With ship approval Adapted perimeter insulation stripe on page 81 Low-chromate to Regulation 1907/2006 EC, Annex XVII
13
HI G
TE
R BIN D
Sopro SP 770
Rapid-set filler
DI
W
YS CR TAL
LI
NE
Packaging Bag 25 kg
Grey, high-strength, sag-resistant, rapid-set, cementitious surface filler. Universal use for filling and patching deep irregularities, holes and cracks in concrete and screeds. For all patching repairs on refurbishment/renovation contracts. For greater coat thicknesses upwards of 10 mm may be extended with (e. g. 0 2 mm graded) sand by up to approx. 1/3 of compound volume.

Coat thickness: 2 30 mm For walls, floors and ceilings For indoor use Not suitable for permanent wet areas Working life: 15 20 minutes Ready to receive floor covering: after approx. 1 hour Compressive strength 40 N/mm2 Low-chromate to Regulation 1907/2006 EC, Annex XVII
Packaging Bag 25 kg
160 Building
chemical products
Surface fillers
Product description
stable
NEW
Sopro RAM 3
Renovation and levelling mortar
Ready for ceramic tiling after only
Universal, sag-resistant, rapid-set, cementitious render and surface filler for smoothing, patching and rendering of wall and floor surfaces. For application to mineral substrates, e. g. concrete, aerated concrete and masonry. Excellent workability and mouldability. Ideal for renovation and refurbishment. Ready for tiling after only 2 hours. Suitable for use in damp and wet spaces, and on balconies and patios. Mortars rapid strength development allows early removal of uneven patches in filler coat using plasterers lattice plane.

2 hours!
Coat thickness: 3 30 mm For walls, floors and ceilings For indoor and outdoor use Working life: approx. 20 minutes Walkable: after approx. 1.5 hours Ready for tiling: after approx. 2 hours Meets DIN EN 998-1 requirements, strength class CS IV Low-chromate to Regulation (EC) No 1907/2006, Annex XVII
Bag 25 kg Bag 5 kg
40 200
1,000 kg 1,000 kg
Sopro AMT 468

Universal, light-grey, sag-resistant, rapid-set, cementitious surface filler applied to walls and floors for patching and smoothing concrete, plasterwork, masonry and screed surfaces. Particularly suitable for application as levelling plaster/render and as levelling coat to provide falls in damp and wet spaces or on balconies, patios and steps/stairways.

enish Rh
Trass
or
i g i n al
Packaging Bag 25 kg
161
Packaging
Packages per pallet
Pallet weight
Surface fillers
Product description
stable
Sopro SP 466
Lightweight levelling mortar
enish Rh
Grey, sag-resistant, rapid-set, cementitious, polymer-modified universal surface filler incorporating lightweight aggregate. Used as rapid-set filler for patching and smoothing concrete, masonry and plastered/rendered wall surfaces. Also suitable as surface gradient filler to provide falls and on heated floor areas. Ideal for rapid progress on refurbishment/renovation schemes. Particularly straightforward application.

Trass
or
igin
al
Coat thickness: 2 30 mm Flexible For walls and floors For indoor and outdoor use Trass-bearing Working life: approx. 30 minutes Walkable: after approx. 2 hours Ready to receive floor covering: after approx. 2 hours Low-chromate to Regulation 1907/2006 EC, Annex XVII
Sopro RS 462
Repair filler
Grey, sag-resistant, rapid-set, cementitious surface filler for smoothing, patching, levelling and repairing concrete, plasterwork, masonry and screed surfaces.
Coat thickness: 1 10 mm, may be extended for larger coat thicknesses using (0 2 mm graded) sand and cement in proportions 1 : 1 : 1 For walls, floors and ceilings For indoor and outdoor use Working life: approx. 30 minutes Low-chromate to Regulation 1907/2006 EC, Annex XVII
Test certificates available upon request
Sopro USW 941 white

Universal filler
White, sag-resistant, rapid-set, cementitious filler for universal application to fill, patch, smooth, mould and model indoor and outdoor surfaces. Ideal for renovation and refurbishment contracts.

Coat thickness: 1 10 mm For walls, floors and ceilings For indoor and outdoor use Working life: 30 40 minutes Low-chromate to Regulation 1907/2006 EC, Annex XVII
Packaging Bag 5 kg
162 Building
chemical products
Surface fillers
Product description
Sopro SBP 474

Swimming pool render
ZD with B dat es PCC-mortar
in
gp
s o ol con
uc
tr
tio
without hydrated lime
Grey, sag-resistant, rapid-set, fibre-reinforced render and filler to DIN EN 998-1, Table 1, strength class CS IV, for rendering, patching and smoothing of wall, floor and ceiling surfaces in concrete, aerated concrete, pumice, clay, calcium-silicate and composite masonry. Particularly suitable as levelling plaster/render and surface gradient filler in swimming pools and similar water-retaining structures. Complies with ZDB (Federation of the German Construction Industry) data sheet Swimming pool construction Guidance on design and workmanship for ceramic coverings in swimming pools, July 2008.

t hee as
Com pl i
Sopro BS 467
Concrete filler
Packaging Bag 25 kg
Soprodur
Microcement void filler Order no. 900
One-component, mineral microcement with special additives. For remedial filling of hollows and voids below tiling, fully vitrified stoneware, natural stone and vibrated floors. Consolidates porous bedding mortar. For application by impregnation, syringing or injection.

For indoor and outdoor use For consolidation of tile coverings by eliminating voids and hollows in beds Working life: approx. 60 minutes Low-chromate to Regulation 1907/2006 EC, Annex XVII
Please observe requirements relating to tools and equipment to be used for mixing and application.
Packaging
Box 30 kg (6 5 kg bags) Bucket 6 kg (12 0.5 kg bags), incl. measuring beaker
163
Swi
Coat thickness: 3 30 mm Without hydrated lime/lime admixtures For walls, floors and ceilings For indoor and outdoor use For permanently underwater applications Working life: approx. 20 minutes Ready to receive covering: after approx. 4 hours Low-chromate to Regulation 1907/2006 EC, Annex XVII
Packaging Bag 25 kg
Fine-aggregate, grey, rapid-set, sag-resistant, cementitious filler for smoothing, patching and coating fair-faced concrete, precast concrete and cement render wall and ceiling surfaces and for stopping fine cracks and pores in concrete surfaces.
Coat thickness: 1 5 mm For walls, floors and ceilings For indoor and outdoor use Working life: 20 30 minutes Low-chromate to Regulation 1907/2006 EC, Annex XVII
Surface fillers
Product description
stable
Sopro G 620 white

Smoothing compound
lit
y le v el Q 1
Q
Crack-free, water-vapour-permeable, gypsum/polymer-based compound used to create smooth, stress-free wall and ceiling surfaces. Applied to masonry, plasterwork, concrete and gypsum plasterboard substrates prior to finishing with ambiento decorative stucco and glazing systems. Fills cracks, holes and joints.

13
ac
c. to D
N IN E
For walls and ceilings For indoor use Straightforward application High coverage Allows extra-fine coating Working life: approx. 45 minutes
Qu
Sopro F 820 white

Smoothing compound
lit
y le v el Q 1
Q
Qu
96 3
13
Sopro EG 828
Electricians gypsum
Coverage depends on application
e Ty p e Ty p
96 3
Crack-free, water-vapour-permeable, gypsum/polymer-based compound used to fill large-area hollows in masonry, plasterwork, concrete and aerated concrete substrates as well as joints between gypsum plasterboard prior to finishing with ambiento decorative stucco and glazing systems. Also used to fill cracks, holes, joints and chases.

ac
c. to DIN
EN
For walls and ceilings For indoor use Straightforward application High filling power Working life: approx. 30 minutes
Rapid-set gypsum for mounting/securing electrical installations, smoothing and making good and as plug for fixings. For indoor use. Ideal for installation of electrical wiring and flush socket outlets. Also suitable for moulding and modelling. Sets in 15 minutes.

For indoor use Natural gypsum to DIN 1168 Fibre- and cement-free Rapid-setting Must not be mixed with cement!
Packaging Bag 5 kg
164 Building
chemical products
Rapid-set mortars
Product description
Sopro Racofix 2000

Rapid-set anchoring mortar Order no. 740
Extra-rapid-set, cementitious anchoring mortar. High tensile bending and compressive strength achieved after only short time. For balcony and stair balustrades. For fixing mortar anchors.

For indoor and outdoor use Working life: approx. 2 minutes Low-chromate to Regulation 1907/2006 EC, Annex XVII
Test certificate available upon request
Packaging Bucket 15 kg Bucket 5 kg Bucket 15 kg (15 1 kg bags) Pot 1 kg (Nr 16 in box) Bag 5 kg
Pallet weight 495 kg 360 kg 495 kg 480 kg 1,000 kg
Sopro Racofix 8700

Rapid-set, cementitious anchoring mortar. For fast installation of sanitary appliances, hooks, anchors etc. For rapid laying of kerbs.

Packaging Bucket 15 kg Bucket 5 kg Pot 1 kg (Nr 16 in box) Bag 5 kg
Pallet weight 495 kg 360 kg 480 kg 1,000 kg
Sopro Rapidur
Rapid-set, cementitious anchoring mortar. For fast fitting of door frames and installation of heating pipes. For anchoring of all sizes of masonry and foundation bolt.

For indoor and outdoor use Working life: 4 6 minutes Low-chromate to Regulation 1907/2006 EC, Annex XVII
Packaging Bucket 15 kg Bucket 5 kg Bag 25 kg Bag 5 kg
Pallet weight 495 kg 360 kg 1,000 kg 1,000 kg
165
For indoor and outdoor use Working life: 3 5 minutes Non-combustible material to DIN 4102 Low-chromate to Regulation 1907/2006 EC, Annex XVII
Surface filler and universal adhesive

Product description
Sopro FSP 824

Ready-to-use filler
Ready-to-use, quick-drying, acrylic-based, universal surface filler. For filling and patching smaller holes and cracks indoors.

Straightforward application Dry after approx. 1 hour Easily overcoatable Colour: white Solvent-free
Coverage depends on application
Packaging Pot 1 kg (Nr 12 in box)
Sopro Racofix
Water-resistant, MS polymer-based, one-component universal adhesive for adhesive bonding, e. g. of skirtings and metal track, to a wide range of materials, such as tiling, glass, plastics, timber, metal and mineral substrates in sanitary, living and commercial spaces.

Water-resistant For bonding wide range of materials Practically odourless For indoor and outdoor use Colour: white
Coverage 140 210 g/m depending on application
166 Building
chemical products
Renovation showcase
167
Concrete repair
Product description
Sopro Repadur KS
PCC corrosion-inhibiting mortar Order no. 850
Cementitious corrosion-inhibiting mortar for use in concrete repair in accordance with ZTV-ING regulations and DafStb repair guidelines. Used to coat reinforcing bars to restore corrosion protection.

One-component Mineral-based Straightforward application For brush application For indoor and outdoor use Low-chromate to Regulation 1907/2006 EC, Annex XVII
Coverage approx. 120 g/m for 10 mm dia rebars
Packaging Bucket 5 kg Can 1 kg (Nr 16 in box)
Sopro Repadur MH
PCC mortar bonding layer Order no. 851
Cementitious mortar bonding layer for subsequent concrete replacement with Sopro Repadur 50. For use in concrete repair in accordance with ZTV-ING regulations and DafStb repair guidelines. Provides optimum contact adhesion for subsequently applied Sopro Repadur 5 or Sopro Repadur 50 reprofiling mortar.

One-component Mortar bonding layer Facilitates application of bonded layers on concrete substrates Facilitates application and improves adhesion of reprofiling mortars For indoor and outdoor use Low-chromate to Regulation 1907/2006 EC, Annex XVII
Test certificate Available upon request Coverage approx. 1.65 kg/m per mm coat thickness
Packaging Bag 25 kg Bag 5 kg Packages per pallet 40 200 Pallet weight 1,000 kg 1,000 kg
Sopro Repadur 50
PCC concrete repair mortar Order no. 852
Cementitious, fibre-reinforced concrete substitute for reprofiling and large-area coating of concrete substrates in accordance with ZTV-ING regulations and DafStb repair guidelines. High-grade, sagresistant reprofiling mortar. Spatula applied to fresh Sopro Repadur MH mortar bonding layer. Allows easy smoothing.

One-component Coat thickness 10 50 mm Mineral-based Fibre-reinforced For indoor and outdoor use Low-chromate to Regulation 1907/2006 EC, Annex XVII
Test certificate Available upon request Coverage approx. 2.0 kg/m per mm coat thickness
168 Building
chemical products
Concrete repair
Product description
Sopro Repadur 5
Fine PCC concrete filler Order no. 853
Fine cementitious filler for sealing pores and levelling concrete substrates. For use in concrete repair in accordance with ZTV-ING regulations and DafStb repair guidelines. For levelling previously applied coats of Sopro Repadur 50 concrete repair mortar. Produces smooth base to receive surface protection system.

One-component Coat thickness 1 5 mm For sealing of pores and blowholes Substrate preparation for paint systems and other coatings Fine filler for concrete repair/reprofiling For indoor and outdoor use Low-chromate to Regulation 1907/2006 EC, Annex XVII
Sopro Repadur 40S

Rapid-set concrete repair mortar Order no. 855
Cementitious, sag-resistant, shrinkage-compensated, rapid-set mortar for concrete repairs in thicknesses of 1 40 mm per coat. Particularly suitable for fast repair of precast concrete units and industrial concrete floors.

169
Concrete repair
One-component Coat thickness 1 40 mm For concrete structures and balconies For precast concrete units For industrial floors and concrete highways/pavements For indoor and outdoor use Low-chromate to Regulation 1907/2006 EC, Annex XVII
Concrete repair
Product description
Sopro Repadur 10S

Fine rapid-set concrete filler Order no. 854
Fine, cementitious, rapid-set, light-grey pigmented filler for thin-coat repairs and for filling horizontal and vertical concrete surfaces, cement and lime/cement render. Excellent workability. Quickly produces smooth surface for subsequent coatings.

One-component Coat thickness 1 10 mm Fine grading Thin-coat filler For indoor and outdoor use Low-chromate to Regulation 1907/2006 EC, Annex XVII
Concrete repair using Sopro Repadur system:

Corrosion protection: Repadur KS Bonding layer: Repadur MH Repair mortar: Repadur 50/40S* Concrete filler: Repadur 5/10S
Concrete repair
Preparation of substrate
Application of anti-corrosion agent
Application of bonding layer
Placing of repair mortar
Final surface finishing
170 Building
chemical products
* When using Sopro Repadur 40S, apply a mixture of Sopro HE 449 bonding emulsion, water and Sopro Repadur 40S as contact slurry.
Primers, bonding agents and cement paints

Product description
Sopro GD 749
Primer
Quick drying
approx. min
Light-blue, solvent-free, fast-drying, synthetic resin primer for high- or variable-suction substrates. For pretreatment of cement screeds, calcium sulphate-based screeds, board subfloors, gypsum plasterboard and gypsum fibreboard, lime/cement render and gypsum plasterwork. Water-thinnable for application to highsuction substrates. Use Sopro GD 749 primer only in concentrated form with gypsumbound substrates or where overcoated by Sopro flow-applied floor-levelling compound.

For indoor and outdoor use, walls and floors Suitable for floor heating systems Drying time: 10 minutes at +23 C
Packaging Barrel 200 kg Canister 25 kg Canister 10 kg Canister 5 kg Bottle 1 kg (Nr 12 in box)
Coverage: 100 200 g/m undiluted
Sopro HPS 673

Bonding primer
Dark-grey, solvent-free polymer dispersion applied in thin coat as bonding layer to impervious, smooth and non-absorbent substrates prior to tilelaying. Also suitable as adhesion promoter on timber, mastic asphalt or magnesium oxychloride (magnesite) screeds and existing firmly adhering adhesive residue, lacquers/ varnishes and PVC coverings

for indoor and outdoor use
For indoor and outdoor use For walls and floors Drying time: 1 2 hours Suitable for floor heating systems With ship approval Solvent-free
Packaging
Coverage: approx. 150 g/m depending on nature of substrate
Bucket 10 kg Bucket 5 kg Bucket 3 kg Bottle 1 kg (Nr 10 in box)
171

Product description
Sopro MGR 637

Multi-purpose primer
Extra-low-emission, quick-drying, one-component reaction resin primer. Particularly suitable for calcium sulphate-based (anhydrite) screeds when laying large-format fully vitrified stoneware units and for stabilizing all types of absorbent and non-absorbent substrate.

For indoor and outdoor use Specifically for calcium-sulphate based screeds when laying large-format fully vitrified stoneware units Suitable for floor heating systems Ready to receive covering: after 30 40 minutes Water- and solvent-free GISCODE RU 1 solvent-free to TRGS 610
Coverage: approx. 175 g/m per coat
Sopro EPG 522

Epoxy primer

For walls and floors, indoors and outdoors Working life: approx. 30 minutes Ready to receive floor covering: after approx. 24 hours
Coverage: 300 500 g/m depending on nature of substrate
172 Building
chemical products

Product description
Sopro BH 869
Construction resin
Two-component epoxy-resin-based construction resin. As primer and adhesion promoter on all smooth substrates. For production of highly wear-resistant and chemically-resistant mortars on concrete floors and cement screeds. For industrial and hall floors, workshops and spaces subject to high mechanical and chemical loads. Used to produce water-permeable singlesized aggregate mortars for laying of bridge kerbstones. For production of capillary breaking joints in swimming pools.

Floors For indoor and outdoor use Working life: approx. 60 minutes Walkable: after approx. 24 hours For coat thickness of 3 50 mm, depending on used aggregate (silica sand)
Coverage as primer: 250 350 g/m; as resin mortar: 170 210 g/m per mm coat thickness depending on adopted grading curve
Packaging
Packages per pallet
Pallet weight
Bucket 24 kg (component A 16 kg + component B 8 kg) (on request) Bucket 12 kg (combi pack) 30 Bucket 5 kg (combi pack) 60 Pot 1 kg (Nr 6 in box) 288
360 kg 300 kg 288 kg
Sopro ESG 868

Epoxy primer sealer
Solvent-free, two-component epoxy resin barrier coat for substrate preparation, particularly suitable for application to freshly laid and/ or damp screeds. May be applied to oily concrete substrates where previously cleaned. Excels by excellent wetting and adhesive properties on damp concrete/screed substrates and reduces risk of osmotic blistering by providing barrier against rising damp. Resistant to water, sea water, wastewater/sewage, diluted acids, alkaline solutions, mineral oils, fuels and lubricants.

For floors Extra-hardwearing and chemical-resistant Working life: approx. 30 minutes For indoor and outdoor use
-com ow 2
pone
nts
Coverage: 2 coats je 0.6 0.9 kg/m each = 1.2 1.8 kg/m
Packaging Bucket 9 kg (combipackage) Bucket 18 kg (combipackage) Bucket 31,6 kg (component A) Bucket 4,4 kg (component B)
Sopro HE 449
Bonding emulsion

Packaging
Coverage: 100 200 g/m as bonding layer
Bucket 10 kg Bucket 5 kg Pot 1 kg (Nr 12 in box)
173

Product description
Sopro HS 448
Bonding slurry with trass
enish Rh
Trass
or
Trass-bearing bonding and contact slurry for conventional tilelaying using thick-bed method. As bonding layer between concrete and screed for laying of (bonded) screed As bonding slurry for thick-bed laying between earth-moist mortar bed and tile or natural stone covering As bonding layer in conjunction with Sopro DM 610 drainage mortar or other porous screed types with single-size grading

i g i n al
Packaging Bag 25 kg
Sopro HSF 748

enish Rh
Trass
or
i g i n al

Coverage: 1.0 1.5 kg/m for powder application; 1.5 2.0 kg/m for slurry application
Packaging Bag 25 kg
174 Building
chemical products

Product description
Sopro BK 544
Adhesion promoter and suction-control coat
High-alkali-resistant synthetic dispersion mixed with quartz sand for pretreatment of indoor mineral substrates, especially concrete, which are unsuitable for direct application of gypsum plasters due to their low suction, smoothness and density. Sopro BK 554 is used to provide a suction-control coat and bonding layer between plaster-incompatible substrates and gypsum or lime/gypsum plasters. Particularly suitable for smooth-faced in-situ concrete, solid concrete slabs made from precast units and screeded precast concrete surfaces.

Sprayable with 2 mm dia nozzle Adhesion promoter and suction-control coat High alkali resistance Colour: oxide red Drying time: approx. 12 hours Thinnable with 10 % water for high-suction substrates
Coverage 150 300 g/m depending on substrate
Sopro LFT 848

Deep-penetrating primer
Special, transparent-white, solvent-free, polymer dispersion-based deep-penetrating primer for stabilizing friable substrates, e. g. cement, lime or lime/cement renders and gypsum plasters. Substantially reduces and evens outs suction of paperless gypsum panels, gypsum plasterboard and gypsum fibreboard. Used to prepare substrates for subsequent wallpapering or plastering. Sopro GD 749 primer shall be used prior to tiling.

Solvent-free Water-vapour-permeable Very high coverage High penetration and stabilizing effect Saponification-resistant For walls and ceilings For indoor and outdoor use
Coverage 150 350 ml/m depending on substrate suction
Packaging Canister 5 ltr
175

Product description
Sopro DYX 700

Cement paint
Hydraulically setting, mineral paint for new-build, refurbishment and architectural conservation schemes. Resistant to water, weather and freeze-thaw cycles. Suitable for coating internal walls in damp and wet spaces vulnerable to fungal attack. Also for use in factory halls, laundries, cellars/basements, garages and stables.

For indoor and outdoor use Resistant to mould formation Low-chromate to Regulation 1907/2006 EC, Annex XVII Colour: white 0
Coverage 0.6 0.8 kg/m for 3-coat application
Packaging Bag 5 kg
Sopro KQS 607

Crystal quartz sand (0,06 0,20 mm)
Used in preparing Sopro FEP three-component epoxy tile grout.
Packaging Bag 25 kg
Sopro QS 507
Coarse silica sand (0,10 0,30 mm)
Used in preparing surface fillers and for blinding epoxy resin coatings.
Packaging Primers, bonding agents and cement paints Bag 25 kg
Sopro QS 511
Coarse silica sand (0,40 0,80 mm)
Used in preparing surface fillers and for blinding epoxy resin coatings.
Packaging Bag 25 kg
176 Building
chemical products
Concrete repair system

Quality-controlled concrete refurbishment system
Substrate
Defective concrete with corroded steel reinforcement; remove loose concrete, derust reinforcing steel; cleaning grade SA 2 1/2
Corrosion protection
Sopro Repadur KS PCC, 1st and 2nd coat
Mortar bonding layer

Sopro Repadur MH PCC
Reproling
Sopro Repadur 50 or Sopro Repadur 40S
Finish
Sopro Repadur 5 or Sopro Repadur 10S
* When using Sopro Repadur 40S, apply a mixture of Sopro HE 449 bonding emulsion, water and Sopro Repadur 40S as contact slurry.
177
Product-systems
Basement waterproong system

Waterproong to DIN 18 195 with bitumen coating
Substrate
Masonry
Sopro KDG 751 primer for basement waterproong
Concentrate
Sopro KDV 681 primer for basement waterproong
Waterproong
1st waterproof coat 1st waterproof coat Sopro KSP 652 waterproof basement coating Two-component waterproof basement coating
Scrim reinforcement
Sopro KDA 662 scrim for basement waterproong 2nd waterproof coat 2nd waterproof coat (embedded in 1st waterproong coat)
Protective layer
Sopro KDS 663 basement drainage mat
Angle llet
Sopro AMT 468 levelling mortar with trass
Damp-proof course/plinth area

Sopro DSF 523 onecomponent exible sealing slurry or Sopro TDS 823 twocomponent turbo sealing slurry
Product-systems
178 Building
chemical products
SoproThene-System
Waterproong to DIN 18 195 with cold-applied, self-adhesive bitumen sheet membrane
Substrate
Masonry
SoproThene primer
Waterproong
SoproThene nonwoven edging tape SoproThene aluminium edging tape
SoproThene bitumen sheet membrane SoproThene corner tape
SoproThene adhesive tape
Protective layer
Sopro KDS 663 basement drainage mat
Angle llet
Sopro AMT 468 levelling mortar with trass
Damp-proof course/plinth area

Sopro DSF 523 onecomponent exible sealing slurry or Sopro TDS 823 twocomponent turbo sealing slurry
Product-systems
179
Index of contents

Tile adhesives
page
2 27 20 19 20 27 28 51 49 50 51 52 61 62 66 66 67 78 79 84 84 85 94 95 96 99
Tile grouts

100 105 106 131

page
134 148 149 153 154 155 156 157 158 167 168 170 171 176 177 179

page
182 185 186 191 190 191 192 194 195 196 197 199 200 205 206 207 208 209 210 213 211 214
Drainage and bedding mortars
Sopro DM 610 drainage mortar
The safeguard against frost and eforescence on balconies and patios

T
es
ted t
o
CT-C25-F4
N
E N 13 8
Bedding mortar for
tiles and natural stone frost and eforescence on balconies and patios permeability
Prevents damage from
Very high water Contains Rhenish trass
182 Gardening/
landscaping products
13
DI
Product description
Sopro DM 610
Drainage mortar
es
ted t
CT-C25-F4
N
E N 13 8
13
Trass cement-bonded bedding mortar for laying natural stones, pavers, flags and tiles in outdoor areas. Due to grading curve, a highly-waterpermeable mortar bed is achieved which has virtually no capillary suction, thereby effectively preventing water damage, such as efflorescence and structural damage caused by frost, on balconies, patios, stairs, landings and other external areas. Drainage performance may be increased by installation of Sopro DRM 653 drainage mat. The covering material is laid wet-on-wet using Sopro HSF 448 or Sopro HSF 748.

enish Rh
Trass
or
igin
al
Ready to receive floor covering: after approx. 3 days For floors, indoors and outdoors Very high water permeability Very good workability Pumpable For laying on mortar beds with min. 2 cm coat thickness Low-chromate to Regulation 1907/2006 EC, Annex XVII
Coverage approx. 16 kg/m per cm coat thickness
Packaging Bag 25 kg
Sopro HSF 748

enish Rh
Trass
or
i g i n al

Coverage 1.0 1.5 kg/m for powder application, 1.5 2.0 kg/m for slurry application
Packaging Bag 25 kg
183
DI

Product description
Sopro DRB 875

Binder for water-permeable paving grouts
One-component, solvent-free binder for particularly economical production of water-permeable bedding mortar and paving grout for stone and other pavings. It may be used in conjunction with e. g. Sopro QS 511 coarse silica sand (0.4 0.8 mm) to produce a readily workable, water-permeable bedding mortar and paving grout. For light to medium duty, depending on silica sand grading curve and proportion of binder.

For joint widths from 10 mm For outdoor use Water-permeable Resistant to suction sweeper loads Straightforward application For standard silica sands and chippings Joint colour adjustable through silica sand Resistant to frost and de-icing salts
Coverage approx. 0,75 kg binder for 25 kg silica sand
Packaging Canister 10 kg Canister 5 kg Pot 0,75 kg (12 Stck im Karton)
Sopro TRB 421

Binder with trass
Bonding agent
enish Rh
Trass
or
Special trass-bearing, cementitious binder for preparation of thick-bed adhesives, wall tile adhesives and drainage mortars. For preparation of smooth, easily workable, highly resistant and dense mortars for indoor and outdoor use, particularly suitable for laying sensitive, discoloration-prone natural stone coverings. For ceramic tiles and coverings, terracotta and cast stone units. High trass content significantly reduces risk of efflorescence, bloom and discoloration. Incorporation of Sopro DRM 653 drainage mat is recommended to further enhance drainage performance. Requires mixing on site with (0 4 mm graded) sand or (0 8 mm graded) screed sand. Drainage mortar may be produced by mixing with 2 5 mm, 5 8 mm or 8 12 mm graded quality chippings or 4 8 mm graded rounded aggregate.

i g i n al
Coverage 3.5 4.0 kg/m for 1 cm mortar bed thickness (mixing ratio 1 : 4)
Packaging Bag 25 kg
184 Gardening/
Product description
Sopro TVM 858

enish Rh
Trass
or
Hydraulically setting, trass-bearing, cementitious mortar for laying and bonding of discoloration-sensitive natural stone units (e. g. Solnhofen stone tiles, Jura marble), cast stone units and window sills, using thick-bed method to DIN 18 352, DIN 18 332 and DIN 18 333. For levelling substrates made from cementitious materials, e. g. screeds and concrete, in 10 40 mm mortar beds. Application in conjunction with Sopro HSF 748 flexible bonding slurry with trass.

igin
al
Packaging Bag 25 kg
Sopro Rapidur M1
es
ted t
Polymer-modified, ready-to-use dry mix, CT-C50-F7 to DIN EN 13813, for production of rapid-set cement screeds allowing early flooring installation. No addition of sand necessary. Suitable for heated screeds, bonded screeds, unbonded screeds and floating screeds. Particularly useful for fast-track or tightly scheduled screed laying.
CT-C50-F7
N
E N 13 8
YS CR TAL
LI
NE
Ready to receive floor covering: after approx. 4 hours for tiling, after approx. 24 hours or achievement of moisture content 1.8 % CM for particularly impervious floor coverings, e. g. linoleum, PVC etc. and wood or parquet flooring. For indoor and outdoor use Working life: approx. 20 30 minutes Walkable: after approx. 3 hours Suitable for floor heating systems Pumpable Adapted perimeter insulation stripe on page 81 Low-chromate to Regulation 1907/2006 EC, Annex XVII
HI G
13
TE
R BIN D
Coverage 18 20 kg/m per cm screed-thickness 1.800 2.000 kg/m
Packaging Bag 25 kg
185
DI
W
Paving grouts
Product description
Sopro PF
One-component paving grout
Paving grouts
One-component, resin-modified, solvent-free, pre-mixed, atmospheric-oxygen-curing grout for light-duty stone and other pavings, e.g. on patios, garden paths and surfaces, yards and driveways.

For joint widths from 5 mm For outdoor use Water-permeable Suitable for high-pressure water jetting Straightforward application Ready-to-use Resistant to frost and de-icing salts

Order no. Col. no. 671 pavement grey 13 670 sand 36
Order no. 672 anthracite
Col. no. 66
Coverage 1.7 kg for 1 l fresh mortar. See also pages 190 191
Sopro EPF
Two-component epoxy paving grout
Two-component, solvent-free, water-emulsifiable epoxy resin grout for light- to medium-duty stone and other pavings, e. g. in pedestrian precincts, parks, residential streets and car parks.

For joint widths from 5 mm For outdoor use Water-permeable Resistant to suction sweeper loads Suitable for high-pressure water jetting Straightforward application May be slurry-applied Resistant to frost and de-icing salts

Order no. Col. no. 594 pavement grey 13 595 sand 36
Col. no. 66
Packaging
Bucket 25 kg (24.5 kg sand/resin mix, 0.5 kg curing agent)
Sopro PF and Sopro EPF grouting colours* 186 Gardening/
pavement grey 13
sand 36
anthracite 66
Paving grouts
Product description
Sopro HFE 694

Epoxy paving grout
Water-emulsifiable, solvent-free, two-component epoxy grout for natural stone and other pavings. Used to produce water-impermeable joints in heavy-duty surfaces, e. g. roads, streets, car parks and loading bays.

For joint widths upwards of 10 mm For outdoor use Compressive strengths 50 N/mm Waterproof (subject to inadequate compaction) Resistant to suction sweeper loads Suitable for high-pressure water jetting Straightforward application May be slurry-applied Resistant to frost and de-icing salts

Order no. Col. no. 693 pavement grey 13

Packaging
Order no. 694 sand

Packages per pallet
Col. no. 36
Coverage: 1.8 kg for 1 l fresh mortar. See also pages 190 191
Bucket 25 kg (24.15 kg sand/resin mix, 0.85 kg curing agent) 24
Sopro HFE 694 grouting colour*

pavement grey 13 sand 36
Sopro TNF
Natural stone grout with trass 5 40 mm joints
s Te
ted to
CG2 WA
N
Rapid-set, trass-bearing, cementitious paving grout used to grout paved surfaces in external works and landscaping, drainage channels and medium- to medium heavy-duty vehicular pavements. Also suitable for grouting natural and cast stone coverings on balconies and patios with wider joints and coarse, rustic surface textures or for polygonal tiling. With Rhenish trass and special protection to reduced risk of efflorescence.

88
E N 13 8
enish Rh
Trass
or
igin
al
5 40 mm joint widths For indoor and outdoor use Compressive strengths 25 N/mm Resistant to suction sweeper loads Suitable for high-pressure water jetting Resistant to frost and de-icing salts Early walkability and loadability Low-chromate to Regulation 1907/2006 EC, Annex XVII Farb-Nr. 15 13 18 Col. no. 684 beige 676 anthracite Farb-Nr. 32 NEW 66
Col. no. 674 grey 675 pavement grey 677 sandgrey

Packaging Bag 25 kg
Coverage: See pages 190 191
Sopro TNF grouting colours*
grey 15
pavement grey 13
sandgrey 18
beige 32
anthracite 66
187
Paving grouts
DI
Paving grouts
Product description
Sopro BSF 611

Paving grout for concrete units 5 30 mm
Paving grouts
s Te
ted to
CG2 WA
N
enish Rh
E N 13 8
88
Rapid-set, trass-bearing, cementitious paving grout, particularly suitable for in concrete segmental pavements in gardens/landscaped areas and in medium- to heavy-duty vehicular pavements, including areas exposed to frost and de-icing salts. Specially tailored to properties of concrete pavers (e.g. in respect of strength and temperature behaviour). Suitable for linear structures, e. g. roads and drainage channels, for roundabouts and for hard landscaped areas, e. g. marketplaces. Contains Rhenish trass. Use of Sopro PFM high-strength paving grout is recommended for natural stone segmental pavements.

DI
Trass
or
i g i n al
For 5 30 mm joint widths For indoor and outdoor use Compressive strengths 30 N/mm Resistant to suction sweeper loads Suitable for high-pressure water jetting Resistant to frost and de-icing salts Early walkability and loadability Certified to CDF test Low-chromate to Regulation 1907/2006 EC, Annex XVII Col. no. 15
Containers per pallet 40 Pallet weight 1.000 kg
uting r gro asto f l a c Ide in pre ls joints e channe t e r conc
Order no. 611 grey Coverage 1.9 kg for 1 l fresh mortar. See also pages 190 191
Packaging Bag 25 kg
Sopro PFM
High-strength paving grout
Rapid-set, trass-bearing, cementitious paving grout, specially for heavy-duty natural and concrete pavings. The trass content serves to reduce efflorescence. Particularly suitable for heavy-duty street/ road surfaces, pedestrian precincts, hard landscaping and areas exposed to water jetting, frost and de-icing salts.

s Te
ted to
CG2 WA
N
E N 13 8
88
enish Rh
Trass
or
For 5 30 mm joint widths For outdoor use Compressive strengths 68 N/mm Resistant to suction sweeper loads Suitable for high-pressure water jetting Resistant to frost and de-icing salts Early walkability and loadability Low-chromate to Regulation 1907/2006 EC, Annex XVII
DI
i g i n al
Order no. Col. no. 575 grey 15 574 pavement grey 13

Packaging Bag 25 kg
Col. no. 66
Pallet weight 1.000 kg
Sopro PFM grouting colours*

grey 15 pavement grey 13 anthracite 66
188 Gardening/
Paving grouts
Product description
Sopro PFA 867

Paving grout cleaning aid
For indoor and outdoor use Walls and floors For brush and spray application Low consumption For cementitious and epoxy resin bonded Sopro paving grouts
Coverage 1 litre is sufficient for 5 15 m, depending on substrate
Packaging Canister 10 ltr Canister 5 ltr Bottle 1 ltr (Nr 4 in box)
SoproDur HF-D 817
Elastic, oxime-free, chemical-resistant sealant for sealing floor and perimeter joints exposed to high mechanical and chemical loads in warehouses, factory halls, workshops, washing facilities, catering kitchens and yard areas.

For outdoor use High temperature resistance up to +265 C Excellent chemical, ageing, UV and weathering resistance Amenable to high-pressure cleaning Colour: grey (colour code 15) Oxime-free
Coverage 310 ml for 3.1 m joint (10 10 mm)
NEW
Sopro PUD 682

Polyurethane sealant
Highly elastic, rapid-set, solvent-free polyurethane sealant for filling horizontal and vertical expansion and construction joints. For concrete wall and floor surfaces, pavements and heavy-duty areas, e. g. car parks, supermarkets, warehouses etc. Suitable for producing flexible joints at junctions between similar and different types of material, e.g. ceramic tiles, metal units, stone, brick etc. Product cures through action of humidity to produce elastic seal. For application using industry-standard spray guns for sausages.

For walls and floors For indoor and outdoor use Sag-resistant High long-term elasticity High weather resistance Bonds excellently with wide variety of materials Also suitable for wider joints Ready-to-use Excellent workability Bubble-free curing Tack-free surface Overcoatable Colour: grey
Coverage: 840 g for 6 m joint length (10 10 mm)
Packaging 840 g aluminium sausage (Nr 20 in box)
189
Paving grouts
Water dissolved, high-alkaline product to achieve temporary water repellency of absorbent concrete and natural stone pavers to facilitate grouting. Sopro PFA 867 paving grout cleansing aid penetrates capillary system of mineral pavers to achieve water repellency, thereby allowing easier removal of Sopro paving grouts. Also suitable as cleansing aid for polygonally laid natural stone tiles in wall and floor areas.
Sopro paving grout coverage chart

Mosaic pavings
Width length (mm) Paving grouts
Small setts
Width length (mm)
50 50
Joint width in mm
40 60
40 40
100 200
100 120
100 100
80 100
60 80
Approx. coverage (kg/m)
Sopro PF one-component paving grout

3* 5* 8 10 15 5,7 9,0 13,7 16,5 22,8 6,0 9,3 14,1 17,0 23,4 7,1 11,0 16,5 19,8 27,0 2,2 3,6 5,6 6,9 9,9 2,7 4,3 6,8 8,3 12,0 2,9 4,7 7,3 9,0 12,9 3,3 5,3 8,2 10,0 14,3 4,2 6,7 10,3 12,6 17,7
Sopro EPF two-component epoxy paving grout

5* 8 10 15 8,7 13,2 16,0 22,2 9,0 13,7 16,5 22,7 10,7 16,0 19,2 26,2 3,5 5,4 6,7 9,6 4,2 6,6 8,1 11,6 4,6 7,1 8,7 12,5 5,1 7,9 9,7 13,8 6,5 10,1 12,2 17,2
Sopro HFE epoxy paving grout

5 8 10 15 18,0 24,9 18,5 25,5 21,6 29,5 9,1 13,0 9,8 14,1 10,9 15,6 13,7 19,3
Sopro TNF natural stone grout with trass/Sopro PFM high-strength paving grout
5 8 10 15 10,4 15,7 18,9 26,3 10,7 16,2 19,5 27,0 12,6 19,0 22,8 31,1 5,0 7,8 9,6 13,8 5,4 8,4 10,4 14,9 6,0 9,4 11,4 16,4 7,7 11,9 14,4 20,4
Sopro BSF 611 Paving grout for concrete units

5 8 10 15 10,4 15,7 18,9 26,3 10,7 16,2 19,5 27,0 12,6 19,0 22,8 31,1 5,0 7,8 9,6 13,8 5,4 8,4 10,4 14,9 6,0 9,4 11,4 16,4 7,7 11,9 14,4 20,4
190 Gardening/
*Note: For 5 8 mm joint widths, Sopro PF one-component paving grout and Sopro EPF two-component epoxy paving grout require particularly intensive compaction.
Sopro paving grout coverage chart

Large setts
Width length (mm)
Paving ags
Width length (mm) Paving grouts
160 180
Joint width in mm
140 180
120 160
100 200
600 400
400 400
300 300 200 200

3* 5* 8 10 15 1,7 2,8 4,5 5,5 8,1 1,9 3,0 4,8 5,9 8,6 2,1 3,5 5,5 6,7 9,7 0,6 1,0 1,6 2,0 3,0 0,7 1,2 1,9 2,4 3,6 1,0 1,6 2,6 3,2 4,7 1,5 2,4 3,8 4,7 6,9
Sopro EPF two-component epoxy paving grout

5* 8 10 15 2,8 4,3 5,3 7,8 3,0 4,6 5,7 8,3 3,4 5,3 6,5 9,4 1,0 1,6 2,0 2,9 1,2 1,9 2,3 3,5 1,6 2,5 3,1 4,6 2,3 3,7 4,6 6,7
Sopro HFE epoxy paving grout

5 8 10 15 6,0 8,8 6,4 9,4 7,3 10,6 7,5 10,8 2,2 3,3 2,6 3,9 3,5 5,1 5,1 7,5
Sopro TNF natural stone grout with trass/Sopro PFM high-strength paving grout
5 8 10 15 3,3 5,1 6,3 9,3 3,5 5,5 6,8 9,9 3,9 6,3 7,7 11,1 4,1 6,4 7,9 11,4 1,2 1,9 2,3 3,5 1,4 2,2 2,7 4,1 1,8 3,0 3,6 5,4 2,7 4,4 5,4 8,0

5 8 10 15 3,3 5,1 6,3 9,3 3,5 5,5 6,8 9,9 3,9 6,3 7,7 11,1 4,1 6,4 7,9 11,4 1,2 1,9 2,3 3,5 1,4 2,2 2,7 4,1 1,8 3,0 3,6 5,4 2,7 4,4 5,4 8,0
These tables present approximate values calculated on the basis of practical application. The values may vary upwards or downwards due to the natural form of the ag and sett pavings. In case of doubt, trial laying of a sample area is recommended to determine coverage. Joints depth 30 mm. No liability may be construed and no claims shall be accepted in respect of these details.
191
Waterproofings
Product description
Sopro DSF 523


Waterproofings
Sopro DSF 623


192 Gardening/
Waterproofings
Product description
Sopro DSF 423


Packages per pallet

NEW NEW
40 40
Sopro TDS 823

MicroGumTechnology

Packaging
Bag 10 kg with powder Component A Canister 10 kg with liquid Component B Bag 4,5 kg with powder Component A Canister 4,5 kg with liquid Component B
193
Waterproofings
Waterproofings
Product description
Sopro DS 422
Sealing slurry
Cementitious sealing slurry used to provide waterproof barrier against surface and seepage not subject to hydrostatic pressure on masonry, concrete and plasterwork. Used for new-build and refurbishment schemes in building construction and civil engineering, and process water tanks with max. 5 m water depth.

Waterproofings
Coverage 3 6 kg/m depending on application and duty
Packaging Bag 25 kg
NEW
Sopro DRM 653

Drainage mat 8 mm

Exterior Reliable horizontal drainage underneath Sopro DRM 610 drainage mortar Low construction height (8 mm) High compressive strength
Packages per pallet 6 Pallet weight approx. 60.5kg
Packaging Roll 12,5 m (100 cm wide)
SoproThene
Bitumen sheet membrane
Self-adhesive, flexible, crack-bridging bitumen sheet membrane comprising polymer-modified bitumen on tear-resistant carrier film. Used to produce flexible waterproof membranes for basements to DIN 18 195, providing barrier against ground moisture and nonaccumulating seepage water under ground slabs and on walls (DIN 18 195 Part 4) and against water without hydrostatic pressure on floors and in wet areas (DIN 18 195 Part 5). Likewise used for horizontal waterproof membranes incorporated within structural elements. For waterproofing external basement walls, balconies and patios. Substrates shall be pretreated with SoproThene primer or Sopro BVA 759 bitumen primer L.

For indoor and outdoor use For walls and floors Flexible Self-adhesive Immediately waterproof and resistant to driving rain Application temperature: - 5 C to +30 C Crack-bridging

Packaging Packages per pallet 15 24 45 90 Pallet weight approx. 405 kg approx. 216 kg approx. 342 kg approx. 342 kg Roll 15 m (100 cm wide) Roll 5 m (100 cm wide) Roll 15 m (30 cm wide) Roll 15 m (15 cm wide)
194 Gardening/
Surface gradient fillers and rapid-set mortars

Product description
Sopro AMT 468

Universal, light-grey, sag-resistant, rapid-set, cementtious surface filler applied to walls and floors for patching and smoothing concrete, plasterwork, masonry and screed surfaces. Particularly suitable for application as levelling plaster/render and as levelling coat to provide falls in damp and wet spaces or on balconies, patios and steps/stairways.

enish Rh
Trass
or
igin
al
Packaging Bag 25 kg
Sopro Racofix WSM

Water-stop mortar Order no. 680
Cementitious, polymer-modified water-stop mortar used to plug water leaks, e.g. in basements and shafts, and burst pipes. Especially useful against water pressure. When mixed with water, Racofix water-stop mortar forms a plastic, thixotropic and easily applicable paste. Particularly suitable for plugging drillholes following installation of Sopro VK 690 injection damp-proof course.

Plugs water leaks in seconds Sets within 90 seconds High water impermeability Chloride-free
Coverage 1.8 kg mortar for 1 ltr void
195

Product description
Sopro Racofix 2000

Extra-rapid-set, cementitious anchoring mortar. High tensile bending and compressive strength achieved after only short time. For balcony and stair balustrades. For fixing mortar anchors.

For indoor and outdoor use Working life: approx. 2 minutes Low-chromate to Regulation 1907/2006 EC, Annex XVII
Packaging Bucket 15 kg Bucket 15 kg (15 1 kg bags) Bucket 5 kg Bag 5 kg Pot (Nr 16 in box)
Pallet weight 495 kg 495 kg 360 kg 1,000 kg 480 kg
Sopro Racofix 8700

Rapid-set, cementitious anchoring mortar. For fast installation of sanitary appliances, hooks, anchors etc. For rapid laying of kerbs.

For indoor and outdoor use Working life: approx. 3 5 minutes Non-combustible material to DIN 4102 Low-chromate to Regulation 1907/2006 EC, Annex XVII
Packaging Bucket 15 kg Bucket 5 kg Bag 5 kg Pot (Nr 16 in box)
Pallet weight 495 kg 360 kg 1,000 kg 480 kg
196 Gardening/

Product description
Sopro ZEA 703

Cement skin remover for exterior use
Concentrated, high-performance acidic cleaner for removing cement skin, lime and mortar residue plus efflorescence and tough soiling on all surfaces non-sensitive to acids, such as ceramic tiles, clinker, mosaic and terracotta.

Acts quickly and thoroughly Only suitable for exterior use due to strong odour Particularly suitable for first-time cleaning of newly laid wall and floor finishes
Coverage sufficient for 10 15 m/ltr, depending on degree of soiling
Sopro GBE 746

Algae and moss remover
Self-acting, concentrated cleaner for removal of slippery growth and other surface soiling caused by trees and plants.

Thorough, effortless removal of soiling in outdoor areas Self-acting Preventive

Coverage approx. 40 m/ltr for application by watering can, up to approx. 150 m/ltr for spray application
Sopro KL 709
Clinker oil
Special ready-to-use product for refreshing and enhancing colour of matt, unglazed clay and clinker tiles, brick tiles and similar unglazed ceramic wall and floor finishes.

Non-film-forming, non-glossing Improves stain resistance and facilitates maintenance For indoor and covered outdoor areas
Coverage sufficient for 5 10 m/ltr, depending on substrate suction
197

Product description
Sopro RU 632
Rust converter
Acidic, reoxidizing stone cleaner with special anti-rust ingredients for rust removal and conversion. For cleaning iron-bearing natural stone and removing rust and associated discoloration from acid-resistant substrates. Also suitable for treating rust stains on cast stone units caused by surface corrosion of nails and other ferrous components etc.

Highly efficient removal of rust With long-lasting results Protects against renewed rusting For indoor and outdoor use
Coverage 1 ltr per 7 15 m depending on type and degree of rusting
Sopro KRA 631

Power cleaner for outdoors
High-performance, acidic cleaner for removal of efflorescence, concrete and mortar residue, incrustations and general soiling from any type of acid-resistant surface, e. g. natural and cast stone, walls, facades, patios, clinker, tiling etc.

High-efficiency cleaning Extra-strong concentrate Rinse only with water after application time For outdoor use
Coverage depends on type and degree of soiling
198 Gardening/

Product description
Sopro MNP 704

Natural stone stain stop
Transparent impregnation especially for marble, natural and cast stone surfaces which provides long-lasting protection against oil, grease and water stains.

Sopro MNF 705

Natural stone colour enhancer
Transparent impregnation especially for marble, natural and cast stone surfaces which provides long-lasting protection against oil, grease and water stains.

Coverage sufficient for approx. 10 m/ltr depending on suction of covering
199
Coverage sufficient e.g. for 30 m/ltr on polished stone surfaces. Otherwise, coverage depends on substrate suction
Paving grout system

Laying and grouting of pervious pavings
Substrate
Compacted gravel bed
Mortar bed
Bonding and contact layer

Laying of paving units by immersion in Sopro HSF 748 exible bonding slurry with trass
Grouting
Sopro PF one-component paving grout Sopro EPF two-component epoxy paving grout
200 Gardening/
Epoxy paving grout system

Impervious epoxy grouting for heavy-duty pavings
Substrate
Concrete

Sopro HSF 748 exible bonding slurry with trass
Mortar bed

Product-systems
Grouting
Sopro HFE 694 epoxy paving grout
201
Drainage mortar system

Laying of outdoor natural stone coverings using Sopro drainage system
Substrate
Cement screeds/concrete
Waterproong
1st waterproof coat Sopro DSF 523 one-component exible sealing slurry
2nd waterproof coat
Drainage
Sopro DRM 653 drainage mat

Product-systems

Grouting
202 Gardening/
Sopro TNF natural stone grout system

Laying and grouting of polygonal coverings, indoors and outdoors
Substrate
Concrete surface

Sopro MDM 888 medium-/thick-bed mortar
Grouting
Sopro TNF natural stone grout with trass
203
Product-systems
Concrete stone grout system

Cementitious grouting for middle to heavy-duty natural stone pavings
Mortar bed

Product-systems
Grouting
204 Gardening/
High-strength paving grout system

Cementitious grouting for heavy-duty pavings
Substrate
Concrete

Mortar bed

Product-systems
Grouting
Sopro PFM 575 high-strength paving grout
205
Sopro Bauchemie GmbH, Wiesbaden
206
Sopro International
Germany Sopro Bauchemie GmbH Wiesbaden Austria Sopro Bauchemie GmbH, Austria Asten Poland Sopro Polska Sp. z o.o. Warsaw Switzerland Sopro Bauchemie GmbH Branch ofce Thun
Czech Republic Sopro CZ s.r.o. Prague Hungary Sopro Hungria Kft. Budakeszi The Netherlands Sopro Nederland B.V. Nieuwegein
207
Nachhaltigkeit, Qualittsmanagement, Normen, Stichwortverzeichnis, Alphabetische Produktbersicht
Sustainability
Sustainable
Sustainability always understood as the simultaneous pursuit, with equal priority, of environmental, social and economic goals is a cornerstone of Sopro Bauchemies corporate philosophy. Key planks of its policy include eco-friendly, resource-saving production and the development of low-emission products and solutions. This, in turn, demands efcient, economical processes along the entire added value chain. As a member of the German Sustainable Building Council (DGNB), Sopro Bauchemie is committed to the above principles. Yet, sustainable building certication is also gaining increasing importance across the entire construction products market. Through the Healthy Living and Energy Conservation with Ceramics initiatives launched by the EUF (Federation of European Tile Fixers Associations), the ceramics industry and builders merchants are stepping up their efforts and sharpening their prole with regard to sustainability issues. These offer a key potential source of future growth. As an EUF partner, Sopro Bauchemie is actively involved in this process. Alongside its membership of the Umweltallianz Hessen (Hessian Environmental Alliance), Sopro has also signed the 100 Companies for Environmental Protection charter initiated in 2009 by the German Federal State of Hesse. In doing so, it has pledged, among other things, to help reduce the emission of climate-relevant greenhouse gases and actively engage in climate protection.
Low-emission
Our commitment to sustainable, ecological construction practice is underlined by high-grade, low-emission products and our involvement in various projects. The formulation of our products is the most obvious starting point for eco-friendly action: preference is given to raw materials that signicantly reduce or completely eliminate emissions or pollution that pose a risk to human beings and the environment. Emission levels are indicated by the EMICODE rating, based on the GEV e.V. (German Association for Control of Emissions in Products for Flooring Installation) classication. The EMICODE logo certies that the emissions from the tested products pose no risks after application. Sopros customers are able to perform all operations necessary for successful tilelaying from priming, waterproong, substrate levelling, separation and insulation, to tile xing and grouting using certied, low-emission products. Moreover, some products (e. g. Sopro FKM 444 XL, Sopro VF XL 413 and Sopro VF HF 420 tile adhesives) benet from a low-dust formulation. In other words, the amount of dust generated by opening and preparing the material is far lower than for standard Sopro thin-bed adhesives. This helps to maintain a healthy environment both for applicators and for later occupants.
Mitglied in der Aktion 100 Unternehmen fr den Klimaschutz
Environmentally compatible
Sopro Bauchemie has, on its own initiative, undertaken to provide ecologically sound products and solutions, backed up by efcient, economical processes. That eco-friendliness, economic viability and efciency are by no means mutually exclusive is triumphantly demonstrated by our measures under the KOPROFIT initiative launched by the city of Wiesbaden. Sopro Bauchemie has already picked up a string of KOPROFIT company awards. The participants in this scheme to promote integrated environmental technology, launched in over 80 German municipalities and administrative districts, take action to reduce the burden on the environment while at the same time cutting costs. For years now, Sopro Bauchemie in Wiesbaden has embraced a host of measures that compellingly demonstrate how economic prot can be generated without in any way compromising the natural environment or future generations. On the contrary, ecological initiatives and the sparing use of limited resources can even pave the way for cost savings. The programmes introduced in many different parts of the company have achieved signicant reductions in the volume of waste produced, together with appreciable cuts in energy, water and fuel consumption all of which have translated into considerable savings.
208
Quality management
Uniform quality nationally and internationally.
Quality management as a dynamic process rather than a set of static routines represents a cornerstone in Sopro Bauchemie GmbHs corporate philosophy. Our QM strategy is not exclusively geared to individual sites or temporally limited procedures, but aims at delivering uniform quality standards throughout the company network. Today and in the future. Targeting the whole framework of processes and routines, this integral approach requires the active involvement of the entire workforce. Apart from the regular optimization of company procedures, it calls for the continuous monitoring and review of corporate policy and action. The from problem-faced to problem-solved PDCA cycle at the heart of our QM systems clearly underlines our dynamic approach.
Act Plan Check Do
Sopro Bauchemie GmbH has been certied to DIN EN ISO 9001 since 1994. The matrix certication obtained for QM in 2006 also embraced subsidiaries Sopro Bauchemie GmbH Austria and Sopro Polska Sp. Z o. o. With the future integration of further companies in this quality matrix high on the agenda, we shall continue to provide you, our clients, with a consistently high product and service quality. Quality documented by external test certicates Clients can rest assured that Sopros innovative products and perfectly co-ordinated product systems will always remain at the cutting edge of technology while continuing to meet the most stringent requirements. This is guaranteed by a rigorous regime of quality checks and in-house controls and conrmed by external test certicates issued by recognized institutes such as the SFV e. V. institute for wall/oor coverings in Groburgwedel or the Technische Universitt Mnchen. These certicates, for instance, attest conformity with the C and S ratings specied in the European thin-bed adhesive standards, with the Flexmortar quality label for exible tile adhesives and with the CG classes dened in the European tile grout standard. They all serve to underline both the impeccable standard of our products and their exceptional ease of application
ivb
a u u n d Ba u
it u t f r M
ss
st
fte of
c h n o l o gi e
n st I
K A RLSRU
Sopros No.1, our S1-grade flexible tile adhesive, for example, boasts numerous test certificates issued by various external institutes: Technische Universitt Mnchen: C2 TE, S1 to DIN EN 12004. General building control test certificate (abP) for use in conjunction with Sopro DSF 423, Sopro DSF 523, Sopro DSF 623, Sopro TDS 823, Sopro GD 749 and other Sopro system components. General building control test certificate (abP) for use in conjunction with Sopro PU-FD 570/571, Sopro EPG 522 and other Sopro system components SFV e.V. institute for wall/floor coverings, Groburgwedel: General building control test certificate (abP) for use in conjunction with Sopro FDF 525/527, Sopro GD 749 and other Sopro system components Materials Testing Institute (MPA), Braunschweig: General building control test certificate (abP) pursuant to system test for waterproof sheet membranes applied in conjunction with tile coverings: combinations featuring Sopro AEB 640, Sopro AEB 641, Sopro AEB 642/643 and Sopro AEB 644/645 with Sopros No. 1, Sopros No. 1 rapid-set and Sopro FKM XL 444 as tile adhesive and Sopro Racofix universal adhesive or Sopro TDS 823 as adhesive and sealing product at laps. Textiles & Flooring Institute (TFI) GmbH, Aachen: Low-emission under GEV EMICODE system Materials Test Institute Dresden: Fire classification to DIN EN 13501-1: A1/A1fl.
209
PA
We believe in transparency
T
es
ted t
o
E N 12 0
C2EF N S2
es
ted t
o
E N 12 0
Adhesive certication to EN standards and German Flexmortar quality label A

T
dhesive products used for laying ceramic tiles are required to meet various performance standards. These are precisely de ned in European standard DIN EN 12 004 (or ISO 13 007 Part 1), which species the criteria for the C1 and C2 ratings (for cementitious adhesives), D1 and D2 ratings (for dispersion adhesives) and R1 and R2 (for reaction resin adhesives) along with extra optional parameters. Standard DIN EN 12 004 sets out the background to the S1 and S2 ratings for cementitious adhesives. The various performance criteria are described in detail in the following sections.
es
ted t
o
C2EF N S2
E N 12 0
Cementitious adhesives
Tensile adhesion strength
The C1 and C2 ratings (specied in DIN EN 12 004) relate to tensile adhesion performance. The Class C1 criteria represent the minimum requirements (min. 0.5 N/mm) for all cementitious tile adhesives. The performance standards specied for Class C2 are appreciably higher, with a minimum tensile adhesion strength of 1 N/mm2 required of thin-bed adhesives. Tensile adhesion tests for the C1 and C2 ratings are performed for four different storage conditions.
04
European standards
04
04
C2TE
European standards for tile adhesives
DI
DI
Deformability
The deformability of hardened, cementitious thin-bed adhesives is tested using a prede ned s pecimen (strip of material) and rated as S1 or S2 (to DIN EN 12 004). While the S1 rating requires a deformability between min. 2.5 mm and 5 mm, Class S2 is reserved for highly deformable products achieving a minimum value of 5 mm a requirement twice that specied by the German Flexmortar guidelines.
Dispersion adhesives
The D1 and D2 ratings (speci ed in DIN EN 12 004) relate to shear strength. All dispersion adhesives are required to meet at least Class D1 requirements, i. e. by exhibiting min. 1 N/mm shear strength after dry and heat storage. The D2 rating additionally requires a minimum shear strength of 0.5 N/mm after water storage together with a shear strength 1 N/mm at elevated temperatures.
Reaction resin adhesives

Like the D1 and D2 ratings for dispersion adhesives, Classes R1 and R2 for reaction resin adhesives (speci ed in DIN EN 12 004) relate to shear strength. All reaction resin adhesives are required to meet at least Class R1 requirements, i.e. by exhibiting min. 2 N/mm shear strength after dry and water storage. The R2 rating additionally requires a minimum shear strength of 2 N/mm after temperature cycles.
210
DI
Class C1
Tensile adhesion strength after dry storage Tensile adhesion strength after water storage Tensile adhesion strength after heat storage Tensile adhesion strength after freeze-thaw storage 0.5 N/mm 0.5 N/mm 0.5 N/mm 0.5 N/mm
Class C2
1 N/mm 1 N/mm 1 N/mm 1 N/mm
Application properties
Extra letters, e. g. T, E and F, may be added to the rating code to indicate supplementary application properties.
T E F
= thixotrophic / high sag resistance = extended open time (only applicable to cementitious and Class D2 dispersion adhesives) = fast setting (only applicable to cementitious adhesives)
The high-performance Sopro No. 1 exible cementitious tile adhesive, for instance, boasts a tensile adhesion strength exceeding 1 N/mm (C2) plus a deformability of over 2.5 mm (S1). It also possesses properties allowing easy application, such as high sag resistance and an extended open time. It is therefore classed as C2 TE/S1. By way of a further example, Sopro SK 441 highly exible dispersion adhesive achieves a D2 TE rating, i. e. exhibits a shear strength 1 N/mm after dry and heat storage and at elevated temperatures together with a shear strength 0.5 N/mm2 after water storage. Again, the products workability is greatly enhanced by its high sag resistance and extended open time. Sopro DBE 500 epoxy tile adhesive exhibits a shear strength 2 N/mm2 after dry and water storage and after temperature cycles as well as high sag resistance. It duly achieves a rating of R2 T.
German Flexmortar guidelines
ence, any exible, one-component thin-bed adhesive classed C2/S1 to European standards DIN EN 12 004 automatically meets the requirements of the German Flexmortar guidelines. Indeed, the C2/S1 rating exceeds the demands of the Flexmortar guidelines with regard to deformability and thus exibility a particularly vital property. As a result, the adhesive performance implied by the C2/S1 rating is currently superior to that signalled by the (lozenge-shaped) Flexmortar quality label alone.
T T H
he Flexmortar guidelines specify national requirements for exible, one-component adhesives. These guidelines are not effective at European level.
he minimum requirements for exible tile adhesives correspond to European Class C2 and additionally stipulate a minimum deformability of 2.5 mm, although this provision in respect of key test criteria fails to match the much stiffer test procedures of the current DIN EN 12 004, which places far stricter demands on the condition of test specimens.
CE marking
he CE mark is afxed by manufacturers solely to conrm the conformity of their products with the relevant European standards. CE marking has been mandatory for tile adhesives since 1.04.2004 and serves as a kind of product passport to permit the free movement of goods within Europe. The minimum requirement is a Class C1 rating to EN 12 004. Award of the CE mark is subject to initial type testing by a recognized institute, which conrms compliance of the products properties with the requirements of the relevant European standards. Copies of test certicates are obtainable from Sopro. Each CE mark indicates the relevant manufacturer together with the performance data for the four storage conditions. Sopros tile adhesives all meet the minimum requirements, without exception.
Note!
Tile adhesives may bear the CE mark even if they fail to meet the minimum C1 requirement for all four storage conditions. In such cases, however, the minimum requirement may only be waived for heat and freeze-thaw storage. Tile adhesives displaying a CE mark subject to these exceptions must not be used outdoors. Such tile adhesives may be recognized by the designations NPD (no performance determined) or KLF (keine Leistung festgestellt) or by performance data stated in the CE label that fail to meet the C rating requirements.

Biebricher Strae 74 65203 Wiesbaden (Germany)
The production date is printed on the packaging. EN 12 004 Improved, rapid-set, cementitious mortar for wall and floor coverings, indoors and outdoors Fire classification Early tensile adhesion strength (after 6 hours) Tensile adhesion strength after dry storage Tensile adhesion strength after water storage Tensile adhesion strength after heat storage Tensile adhesion strength after freeze-thaw storage class E 0,5 N/mm 1 N/mm 1 N/mm 1 N/mm 1 N/mm
211
Adhesive classification to DIN EN 12 004

C1
Mandatory parameters
C1
C1 T C1 F
Tensile adhesion strength in each of required tensile adhesion tests: 0.5 N/mm2 plus open time: tensile adhesion strength after min. 20 minutes installation time: 0.5 N/mm2
Additionally with low sag of max. 0.5 mm Additionally with early tensile adhesion strength after dry storage and after max. 6 h 0.5 N/mm2 Additionally with shorter open time (tensile adhesion strength 0.5 N/mm2 after min. 10 minutes installation time) Additionally with early tensile adhesion strength after dry storage and after max. 6 h 0.5 N/mm2 Additionally with shorter open time (tensile adhesion strength 0.5 N/mm2 after min. 10 minutes installation time) Additionally with low sag of max. 0.5 mm Additionally with extended open time (tensile adhesion strength 0.5 N/mm2 after min. 30 minutes installation time) Additionally with early tensile adhesion strength after dry storage and after max. 6 h 0.5 N/mm2
Optional parameters
C1 FT
C1 ETF Additionally with low sag of max. 0.5 mm
C2
C2
C2 T C2 E C2 TE C2 F
Tensile adhesion strength in each of required tensile adhesion tests: 1 N/mm2 plus open time: tensile adhesion strength after min. 20 minutes installation time: 0.5 N/mm2
Additionally with low sag of max. 0.5 mm Additionally with extended open time (tensile adhesion strength 0.5 N/mm2 after min. 30 minutes installation time) Additionally with low sag of max. 0.5 mm Additionally with extended open time (tensile adhesion strength 0.5 N/mm2 after min. 30 minutes installation time) Additionally with early tensile adhesion strength after dry storage and after max. 6 h 0.5 N/mm2 Additionally with shorter open time (tensile adhesion strength 0.5 N/mm2 after min. 10 minutes installation time) Additionally with early tensile adhesion strength after dry storage and after max. 6 h 0.5 N/mm2 Additionally with shorter open time (tensile adhesion strength 0.5 N/mm2 after min. 10 minutes installation time) Additionally with low sag of max. 0.5 mm Additionally with extended open time (tensile adhesion strength 0.5 N/mm2 after min. 30 minutes installation time) Additionally with early tensile adhesion strength after dry storage and after max. 6 h 0.5 N/mm2 Additionally with extended open time (tensile adhesion strength 0.5 N/mm2 after min. 30 minutes installation time) Additionally with low sag of max. 0.5 mm Additionally with early tensile adhesion strength after dry storage and after max. 6 h 0.5 N/mm2
Optional parameters
C2 FT C2 EF C2 ETF
D1
D1
D1 T
Shear strength in each of required shear tests: 0.5 N/mm2 plus open time: tensile adhesion strength after min. 20 minutes installation time: 0.5 N/mm2
Additionally with low sag of max. 0.5 mm Additionally with low sag of max. 0.5 mm Additionally with extended open time (tensile adhesion strength 0.5 N/mm2 after min. 30 minutes installation time)
Optional parameters
D1 TE
D2
D2
D2 T
Shear strength in each of required shear tests: 1 N/mm2 and 0.5 N/mm2 after water storage plus open time: tensile adhesion strength after min. 20 minutes installation time: 0.5 N/mm2
Additionally with low sag of max. 0.5 mm Additionally with extended open time (tensile adhesion strength 0.5 N/mm2 after min. 30 minutes installation time) Additionally with low sag of max. 0.5 mm Additionally with extended open time (tensile adhesion strength 0.5 N/mm2 after min. 30 minutes installation time)
Optional parameters
D2 E D2 TE
R1
Mandatory parameters Optional parameters
R1
R1 T
Shear strength in each of required shear tests: 2 N/mm2 plus open time: tensile adhesion strength after min. 20 minutes installation time: 0.5 N/mm2
Additionally with low sag of max. 0.5 mm
R2
Mandatory parameters Optional parameters
R2
R2 T
Shear strength in each of required shear tests: 2 N/mm2 plus shear strength after temperature cycles: 2 N/mm2 plus open time: tensile adhesion strength after min. 20 minutes installation time: 0.5 N/mm2
Additionally with low sag of max. 0.5 mm
S1 S2
Class Class
S1 S2
Deformability 2.5 mm Deformability 5 mm
212
s Te
ted to
CG2 WA
N
E N 13 8
88
DI
E N 13 8
R2T RG
EN 120
88
European standards for tile grouts

ile grouts used for nishing ceramic tiling are required to meet various performance standards. These are precisely dened in European standard DIN EN 13 888 (or ISO 13 007 Part 3), which species the criteria for the CG1 and CG2 ratings (for cementitious tile grouts) and the RG rating (for reaction resin tile grouts)
DI
04
DI
CG classication to DIN EN 13 888

Merely to achieve a CG 1 rating, tile grouts are required to meet criteria for eight different test parameters:
CG1
Abrasion resistance Bending strength after dry storage Bending strength after freeze-thaw storage Compressive strength after dry storage Compressive strength after freeze-thaw storage Shrinkage Water absorption after 30 minutes Water absorption after 240 minutes 2000 mm 2,5 N/mm 2,5 N/mm 15 N/mm 15 N/mm 3 mm/m 5g 10 g
CG2 W, CG2 A and CG2 WA (in addition to CG 1)

Extra-high abrasion resistance Reduced water absorption after 30 minutes Reduced water absorption after 240 minutes 1000 mm 2g 5g
RG classication to DIN EN 13 888

The RG rating applies to reaction resin tile grouts and imposes similarly stringent requirements on the relevant materials:
Abrasion resistance Bending strength after dry storage Compressive strength after dry storage Shrinkage Water absorption after 240 minutes
250 mm 30 N/mm 45 N/mm 1,5 mm/m 0,1 g
213
Sopro shipbuilding systems
Sopro shipbuilding systems Certied products for shipbuilding

These comprise a variety of products and product systems that have been approved for shipbuilding applications. The products and product systems have been issued EC-type examination certi cates (under the Marine Equipment Directive 96/98/EC) by the Ship Safety Division of BG Verkehr (institution for statutory accident insurance and prevention for transport and trafc). The products have also been assigned a U.S. Coast Guard (USCG) approval number, by means of which the international applicability of the products on ships can be certied.
0736 - The production date is printed on the package.
Sopro FKM XL 444

MED-No. Part of MED-No. 118.222 124.096 124.098 118.220 U.S. Coast Guard No. 164.112/EC0736/118.222 164.117/EC0736/124.096 164.117/EC0736/124.098
Approvals:
Adhesives for walls and oors MED*approval no. USCGapproval no. Subject
Wall and floor coverings

Sopro FKM XL 444
118.220 A.1/3.18 e
Sopros No. 1 white rapid-set (order no. 997)
118.221
A.1/3.18 e
214
* Marine Equipment Directive

Approvals:
Product system MED*approval no. USCGapproval no. Subject
Wall coverings
a) Sopro HPS 673 (primer) b) Sopro FKM 444 XL (adhesive) c) Fully vitried stoneware tile d) Sopro FEP (grout/all colours) a) Sopro DSF 423 (waterpr. membrane) b) Sopros No. 1 white rapid-set (adhesive) c) Fully vitried stoneware tile d) Sopro FEP (grout/all colours) a) Sopro PUK 503 (adhesive) b) Fully vitried stoneware tile c) Sopro Brillant (grout/all colours)
118.222 164.112/EC0736/ 118.222 A.1/3.18 a
118.223
164.112/EC0736/ 118.223
A.1/3.18 a
118.224
164.112/EC0736/ 118.224
A.1/3.18 a
Floor coverings
a) Sopro HPS 673 (primer) b) Sopro FKM 444 XL (adhesive) c) Fully vitried stoneware tile d) Sopro FEP (grout/all colours) a) Sopro DSF 423 (waterpr. membrane) b) Sopros No. 1 white rapid-set (adhesive) c) Fully vitried stoneware tile d) Sopro FEP (grout/all colours) a) Sopro HPS 673 (primer) b) Sopro FAS 551 (ller) c) Sopro FKM 444 XL (adhesive) d) Fully vitried stoneware tile e) Sopro HF 8 (grout/all colours) a) Sopro PUK 503 (adhesive) b) Fully vitried stoneware tile c) Sopro Brillant (grout/all colours)
124.096 164.117/EC0736/ 124.096 A.1/3.18 c
124.097
164.117/EC0736/ 124.097
A.1/3.18 c
124.098
164.117/EC0736/ 124.098
A.1/3.18 c
124.099
164.117/EC0736/ 124.099
A.1/3.18 c
Sopro FAS 551 (ller)
124.095
164.117/EC0736/ 124.095
A.1/3.18 c
215
European standards for tile grouts

ile grouts used for nishing ceramic tiling are required to meet various performance standards. These are precisely dened in European standard DIN EN 13 888 (or ISO 13 007 Part 3), which species the criteria for the CG1 and CG2 ratings (for cementitious tile grouts) and the RG rating (for reaction resin tile grouts)
CG classication to DIN EN 13 888

Merely to achieve a CG 1 rating, tile grouts are required to meet criteria for eight different test parameters: CG 1
Abrasion resistance Bending strength after dry storage Bending strength after freeze-thaw storage Compressive strength after dry storage Compressive strength after freeze-thaw storage Shrinkage Water absorption after 30 minutes Water absorption after 240 minutes 2000 mm 2.5 N/mm 2.5 N/mm 15 N/mm 15 N/mm 3 mm/m 5g 10 g
CG 2 (in addition to CG 1)
Extra-high abrasion resistance Reduced water absorption after 30 minutes Reduced water absorption after 240 minutes 1000 mm 2g 5g
RG classication to DIN EN 13 888

The RG rating applies to reaction resin tile grouts and imposes similarly stringent requirements on the relevant materials:
Abrasion resistance Bending strength after dry storage Compressive strength after dry storage Shrinkage Water absorption after 240 minutes 250 mm 30 N/mm 45 N/mm 1.5 mm/m 0.1 g
International Business
Germany
Sopro Bauchemie GmbH Postfach 42 01 52 65102 Wiesbaden Tel.: +49 (0) 6 11 17 07-239 Fax: +49 (0) 6 11 17 07-240 E-Mail: international@sopro.com
Subsidiaries
Switzerland
Sopro Bauchemie GmbH Zweigniederlassung Schweiz Bierigutstrasse 2 CH-3608 Thun Tel.: +41 (0)33 3340040 Fax: +41 (0)33 3340041 E-Mail: info@sopro.ch
Netherlands
E-Mail:
info@soprobv.nl
Austria
Sopro Bauchemie GmbH Lagerstrae 7 A-4481 Asten Tel.: +43 (0) 7224 67141-0 Fax: +43 (0) 7224 67181 E-Mail: marketing@sopro.at
Poland
Sopro Polska Sp. z.o.o. ul. Polecki 23 F PL-02822 Warszawa Tel.: +48 (0) 223 352 300 Fax: +48 (0) 223 352 309 E-Mail: biuro@sopro.pl
Czech Republic
Sopro CZ s.r.o. Pod Vinovkou 31 / A1 CZ-140 00 Praha 4 - Krc Tel.: +42 (0) 234 036 203 Fax: +42 (0) 234 036 200 E-Mail: info@soprocz.cz
Hungary
www.sopro.com
DL 01.12/01.12 Subject to change without notice
E-Mail:
info@sopro.hu
www.sopro.com
Sopro Hungria Kft. Szlskert t. 21 H-2092 Budakeszi Tel.: +36 (0) 23 458 045 Fax: +36 (0) 23 458048
www.sopro.com
Sopro Nederland B. V. Kruyderlaan 21 A NL-3431 BM Nieuwegein Tel.: +31 (0) 3 06 05 02 14 Fax: +31 (0) 3 06 05 08 96
www.sopro.com

2012 Product Catalogue 2012

Uploaded by

Copyright:

Available Formats

2012 Product Catalogue 2012

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

2012 Product Catalogue 2012

Uploaded by

Copyright:

Available Formats

2012 Product Catalogue

Quality materials for your home

Filler systems for gypsum plasterboard

Natural stone tilelaying and grouting

Tile fixing products

Surface fillers Primers and bonding agents

100 105 106 131

Building chemical products

Gardening and landscaping products

Tile fixing products

Sopro FDK 606

Test certificates Available upon request

Packages per pallet 40

Pallet weight 1,000 kg

Test certificates Available upon request

Packages per pallet 40

Pallet weight 1,000 kg

See also application matrix for tile adhesives on pages 20 27.

Test certificates Available upon request

Packaging Bag 25 kg Bag 5 kg

Packages per pallet 40 200

Pallet weight 1,000 kg 1,000 kg

Test certificates Available upon request

Packages per pallet 40

Pallet weight 1,000 kg

See also application matrix for tile adhesives on pages 20 27.

Without any ifs and buts.

Top pro quality

Test certificates Available upon request

with al practic handle

Packaging Bag 25 kg Bag 15 kg with handle Bag 5 kg

Packages per pallet 40 70 200

Pallet weight 1,000 kg 1,050 kg 1,000 kg

See also application matrix for tile adhesives on pages 20 27.

Sopros No.1 rapid-set

Test certificates Available upon request

Packaging Bag 25 kg Bag 5 kg

Packages per pallet 40 200

Pallet weight 1,000 kg 1,000 kg

Packages per pallet 40

Pallet weight 1,000 kg

See also application matrix for tile adhesives on pages 20 27.

Sopros No.1 white

Test certificates Available upon request

Packaging Bag 25 kg Bag 5 kg

Packages per pallet 40 200

Pallet weight 1,000 kg 1,000 kg

Sopros No. 1 white, rapid-set

Test certificates Available upon request

Packaging Bag 25 kg Bag 5 kg

Packages per pallet 40 200

Pallet weight 1,000 kg 1,000 kg

See also application matrix for tile adhesives on pages 20 27.

Sopro FKM 444 XL

with al practic handle

Test certificates Available upon request

Packaging Bag 15 kg with handle

Packages per pallet 40

Pallet weight 600 kg