The document provides information about four SPD910 differential air pressure switches intended for use in air handling systems. It includes technical specifications for each model such as pressure range, repeatability, temperature range, electrical connection details, and dimensions. It also describes how to connect the switches for various applications like vacuum monitoring, high pressure monitoring, and filter or fan monitoring.
The document provides information about four SPD910 differential air pressure switches intended for use in air handling systems. It includes technical specifications for each model such as pressure range, repeatability, temperature range, electrical connection details, and dimensions. It also describes how to connect the switches for various applications like vacuum monitoring, high pressure monitoring, and filter or fan monitoring.
Original Description:
Datasheet for air differential pressure switch - Schneider electric.
The document provides information about four SPD910 differential air pressure switches intended for use in air handling systems. It includes technical specifications for each model such as pressure range, repeatability, temperature range, electrical connection details, and dimensions. It also describes how to connect the switches for various applications like vacuum monitoring, high pressure monitoring, and filter or fan monitoring.
The document provides information about four SPD910 differential air pressure switches intended for use in air handling systems. It includes technical specifications for each model such as pressure range, repeatability, temperature range, electrical connection details, and dimensions. It also describes how to connect the switches for various applications like vacuum monitoring, high pressure monitoring, and filter or fan monitoring.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1/ 2
Sensors & Input Devices
SPD910 Differential Air Pressure Switch
This range of four SPD910 differential air ow switches are intended for use in air handling systems for the monitoring of air ducts, lters and fans. The enclosure is plastic with a rating of IP54. A set-point adjustment is provided under the clip-on clear plastic cover. The mounting bracket and tubing is supplied.
DESCRIPTION
See part number table on page 2
Medium Pressure Range Tolerable overload on one side Repeatability 0.2 3 mbar 0.5 5 mbar 1 10 mbar 5 20 mbar 10 50 mbar Resistive Load
Air and neutral gases 0.2 50 mbar 75 mbar at 30 75 C 50 mbar at 30 85 C
0.025 mbar 0.05 mbar 0.05 mbar 0.05 mbar 0.15 mbar Switching Load 5 A at 250 Vac 4 A at 30 Vdc Inductive 0.8 A at 250 Vac 0.7 A at 30 Vdc Materials in contact with the medium Case: PC 10% GF Cover: PC Diaphragm: Silicone LSR tempered 200 C, free of gas emissions Temperature Medium and ambiance 30 +85 C -22.. +185F Storage 40 +85 C -40.. +185F Mechanical > 106 switching cycles Screw terminals or AMP connectors 6.3 mm or 4.8 mm according to DIN 46244 Cable gland PG11 with cable strain relief IP 00 IP 54 Pipe 6.2 mm Adapter inside thread G1/8 ETL CE conformity DVGW according to DIN 1854 EU conformity: Low voltage directive 73/23/EWG Gas appliance directive: 90/396/EWG CE 0085 A P0918
Service life Electrical connection
Protection standard Pressure connections Tests / Admissions
Without Cover With Cover
Sensors & Input Devices SPD910 PART NUMBER
Part Number 004701090 004701080 004701070 004701060 Model Number SPD910-2000Pa SPD910-1000Pa SPD910-500Pa SPD910-300Pa Description Switch Pres Air SPD910-2000Pa Switch Pres Air SPD910-1000Pa Switch Pres Air SPD910-500Pa Switch Pres Air SPD910-300Pa Replaces SPD900-600Pa SPD900-200Pa
DIMENSIONS Fig. 1
Flow area
1)
Fig. 2
Flow area
FUNCTION The pressure switch has two separate pressure chambers, each with its own connection. The switch operates when the setpoint is either exceeded or not reached. Vacuum Monitoring Connect the pressure switch via P2. Do not connect P1. Leave P1 open. Pake sure that dirt can not get into P1. High Pressure Monitoring Connect the pressure switch via Pa. Do not Connect P2. Leave P2 open. Make sure that dirt can not get into P2. Filter Monitoring Connect P1 before the lter and P2 after it. Fan Monitoring Connect P1 after the fan (in blowing direction) and P2 before the fan.
Schneider Electric Telephone Europe: Malm, Sweden +46 40 38 68 50
