16CTQ... 16CTQ... S 16CTQ... - 1: Schottky Rectifier 16 Amp
16CTQ... 16CTQ... S 16CTQ... - 1: Schottky Rectifier 16 Amp
16CTQ... 16CTQ... S 16CTQ... - 1: Schottky Rectifier 16 Amp
H 12/03
Values
16 60 / 100 850 0.58
- 55 to 175
TO-220
D2PAK
TO-262
www.irf.com
Voltage Ratings
Parameters
VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V)
16CTQ060 16CTQ060S 16CTQ060-1 16CTQ80 16CTQ80S 16CTQ80-1 16CTQ100 16CTQ100S 16CTQ100-1
60
80
100
Values
8 16 850 275 7.50 0.50
Units
A
Conditions
50% duty cycle @ T C = 148C, rectangular wave form Following any rated 5s Sine or 3s Rect. pulse load condition and with 10ms Sine or 6ms Rect. pulse rated V RRM applied TJ = 25 C, IAS = 0.50 Amps, L = 60 mH Current decaying linearly to zero in 1 sec Frequency limited by TJ max. VA = 1.5 x VR typical
Max. Peak One Cycle Non-Repetitive Surge Current (Per Leg) * See Fig. 7 Non-Repetitive Avalanche Energy (Per Leg) Repetitive Avalanche Current (Per Leg)
A mJ A
Electrical Specifications
Parameters
VFM Max. Forward Voltage Drop (Per Leg) * See Fig. 1 (1)
Values Units
0.72 0.88 0.58 0.69 0.55 7.0 0.415 11.07 500 8.0 10,000 V V V V mA mA V
m
Conditions
@ 8A @ 16A @ 8A @ 16A TJ = 25 C TJ = 125 C
TJ = TJ max.
TJ = 25 C TJ = 125 C VR = rated VR
IRM
VF(TO) Threshold Voltage rt CT LS Forward Slope Resistance Max. Junction Capacitance (Per Leg) Typical Series Inductance (Per Leg)
pF nH V/ s
VR = 5VDC, (test signal range 100Khz to 1Mhz) 25C Measured lead to lead 5mm from package body
Thermal-Mechanical Specifications
Parameters
TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range
Values Units
-55 to 175 -55 to 175 3.25 1.63 0.50 2 (0.07) Min. Max. 6 (5) 12 (10) C C
Conditions
RthJC Max. Thermal Resistance Junction to Case (Per Leg) RthJC Max. Thermal Resistance Junction to Case (Per Package) RthCS Typical Thermal Resistance, Case to Heatsink wt T Approximate Weight Mounting Torque
C/W DC operation C/W DC operation C/W Mounting surface , smooth and greased (only for TO-220) g (oz.) Kg-cm (Ibf-in)
www.irf.com
100
20
40
60
80
100
Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg)
1000
TJ= 25C
2.2
100
20
40
60
80
100
P DM
0.001 0.00001
0.0001
0.001
0.01
www.irf.com
7 Average Power Los s - (Watts) 6 5 4 3 2 1 0 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 RMSLimit DC
DC
120 110
see note (2)
100
10
12
14
10
12
Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current (Per Leg)
Non-Repetitive S urge Current - I FS M (A) 1000
At Any Rated Load Condition And With Rated VRRM Applied Following S urge 100 10
100
1000
10000
DUT
IR F P460 R g = 25 ohm
Vd = 25 Volt
CURRENT MONIT OR
www.irf.com
Outline Table
10.54 (0.41) MAX. 3.78 (0.15) 3.54 (0.14) 15.24 (0.60) 14.84 (0.58) 1 2 3 14.09 (0.55) 13.47 (0.53) 3.96 (0.16) 3.55 (0.14) 2.04 (0.080) MAX. 1.40 (0.05) 1.15 (0.04) 0.94 (0.04) 0.69 (0.03) 2.89 (0.11) 2.64 (0.10)
1 2 3
0.10 (0.004)
BASE COMMON CATHODE 2
6.47 (0.25)
15.49 (0.61)
1.22 (0.05)
93
6.18 (0.24)
14.73 (0.58)
2.61 (0.10)
2.32 (0.09) 8.89 (0.35)
3X
BASE COMMON CATHODE 2
1.40 (0.055)
REF.
0.93 (0.37) 0.69 (0.27)
1.14 (0.045) 2X
1
1 2 3
3
4.57 (0.18)
4.32 (0.17)
2 0.61 (0.02) MAX. 5.08 (0.20) REF.
8.89 (0.35)
2.54 (0.10) 2X
www.irf.com
Outline Table
Modified JEDEC outline TO-262 Dimensions in millimeters and (inches)
Marking Information
THIS IS A 16CTQ100S WITH LOT CODE 58 07 ASSEMBLED ON WW 21, 2000 IN THE ASSEMBLY LINE "L"
PART NUMBER
16CTQ100S
www.irf.com
TRL
10.90 (0.429) 10.70 (0.421)
DIA.
4.72 (0.186) 4.52 (0.178)
FEED DIRECTION
SMD-220 Tape & Reel When ordering, indicate the part number, part orientation, and the quantity. Quantities are in multiples of 800 pieces per reel for both TRL and T RR.
16
1 1 2 3 4 5 6 -
C
2
T
3
Q
4
100
5
-1
6
Essential Part Number C = Common Cathode T = TO-220 Q = Schottky Q Series Voltage Rating 1 = TO-262 S = D2Pak 060 = 60V 080 = 80V 100 = 100V
www.irf.com
16CTQ100 ******************************************** * SPICE Model Diode * ******************************************** .SUBCKT 16CTQ100 ANO CAT D1 ANO 1 DMOD (0.07089) *Define diode model .MODEL DMOD D(IS=21.21E-06,N=1.578,Rs=7.804E-03,Ikf=0.9497, Xti=2, Eg=1.11 + Cjo=1.278E-09, M=0.4736, Vj=0.4972, Fc=0.5, Irs=1.114e-21, Nr=4.755, + Bv=119.9, Ibv=215.5E-06, Tt=18.2E-09) ******************************************** .ENDS 16CTQ100
Thermal Model Subcircuit .SUBCKT 16CTQ100 5 1 CTHERM1 CTHERM2 CTHERM3 CTHERM4 RTHERM1 RTHERM2 RTHERM1 RTHERM1 5 4 3 2 5 4 3 2 4 3 2 1 4 3 2 1 1.45E+00 4.54E+00 1.09E+01 1.01E+02 2.49E+00 5.20E-04 5.43E-01 3.05E-02
.ENDS 16CTQ100
Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 12/03
www.irf.com
This datasheet has been download from: www.datasheetcatalog.com Datasheets for electronics components.