MBR 20100

Bulletin PD-21019 rev.
C 01/07
MBRB20...CTPbF
MBR20...CT-1PbF
SCHOTTKY RECTIFIER
20 Amp
IF(AV) = 20Amp
VR = 80/ 100V
Description/ Features
Major Ratings and Characteristics

Characteristics
Values
Units
20
20
80/90/100
IFSM @ tp = 5 s sine
850
VF
@ 10 Apk, TJ = 125C
0.70
TJ
range
- 65 to 150
IF(AV) Rectangular waveform

(Per Device)
IFRM
@ TC = 133C
(Per Leg)
VRRM
This center tap Schottky rectifier has been optimized for low
reverse leakage at high temperature. The proprietary barrier
technology allows for reliable operation up to 150 C junction
temperature. Typical applications are in switching power
supplies, converters, free-wheeling diodes, and reverse battery protection.
150 C TJ operation
Center tap TO-220, D2Pak and TO-262 packages

Low forward voltage drop
High purity, high temperature epoxy encapsulation for
enhanced mechanical strength and moisture resistance
High frequency operation
Guard ring for enhanced ruggedness and long term
reliability
Case Styles
MBRB20...CTPbF
MBR20...CT-1PbF
Base
Common
Cathode
Base
Common
Cathode
Anode
2
Common
Cathode
D2PAK
www.irf.com
Anode
Anode
2
Common
Cathode
Anode
TO-262
1
MBRB20...CTPbF, MBR20...CT-1PbF Series

Bulletin PD-21019 rev. C 01/07
Voltage Ratings
Parameters
MBRB2080CTPbF
MBR2080CT-1PbF
MBRB2090CTPbF
MBR2090CT-1PbF
MBRB20100CTPbF
MBR20100CT-1PbF
80
90
100
VR
Max. DC Reverse Voltage (V)
VRWM Max. Working Peak Reverse Voltage (V)
Absolute Maximum Ratings

Parameters
IF(AV) Max. Average Forward (Per Leg)
Current
(Per Device)
IFRM Peak Repetitive Forward
Current
(Per Leg)
IFSM Non Repetitive Peak
Surge Current
Values
Units
10
20
20
@ TC = 133 C, (Rated VR)
Rated VR, square wave, 20kHz

TC = 133 C
5s Sine or 3s Following any rated load condition
and with rated VRRM applied
Rect. pulse
Surge applied at rated load conditions halfwave,
single phase, 60Hz
2.0 sec 1.0 KHz
850
150
Conditions
IRRM Peak Repetitive Reverse

Surge Current
0.5
EAS
24
mJ
Values
Units
0.80
@ 10A
0.95
@ 20A
Non-Repetitive Avalanche Energy

(Per Leg)
TJ = 25 C, IAS = 2 Amps, L = 12 mH
Electrical Specifications
Parameters
VFM
Max. Forward Voltage Drop

(1)
IRM
Max. Instantaneus Reverse Current
0.70
@ 10A
0.85
@ 20A
0.10
mA
TJ = 25 C
mA
TJ = 125 C
TJ = TJ max.
(1)
VF(TO) Threshold Voltage
Conditions
TJ = 25 C
TJ = 125 C
Rated DC voltage
0.433
rt
Forward Slope Resistance
15.8
CT
Max. Junction Capacitance
400
pF
VR = 5VDC (test signal range 100Khz to 1Mhz) 25C
LS
Typical Series Inductance
8.0
nH
Measured from top of terminal to mounting plane
dv/dt Max. Voltage Rate of Change
10000
V/ s (Rated VR)
(1) Pulse Width < 300s, Duty Cycle <2%
Thermal-Mechanical Specifications
Values
Units
TJ
Parameters
Max. Junction Temperature Range
-65 to 150
Tstg
Max. Storage Temperature Range
-65 to 175
Conditions
RthJC Max. Thermal Resistance

Junction to Case
(Per Leg)
2.0
C/W DC operation
RthCS Typical Thermal Resistance

Case to Heatsink
0.50
C/W Mounting surface, smooth and greased

Only for TO-220
RthJA Max. Thermal Resistance

Junction to Ambient
wt
Approximate Weight
Mounting Torque
Marking Device
50
2 (0.07)
Min.
6 (5)
Max.
12 (10)
C/W DC operation
For D2Pak and TO-262
g (oz.)
Kg-cm Non-lubricated threads
(Ibf-in)
MBRB20...CT
Case style D2Pak
MBR20...CT-1
Case style TO-262
www.irf.com

Reverse Current - IR (mA)
100
10
TJ = 150C
125C
100C
0.1
75C
50C
0.01
25C
0.001
TJ = 150C
TJ = 125C
0.0001
TJ = 25C
20
40
60
80
100
Reverse Voltage - VR (V)
10
Fig. 2 - Typical Values Of Reverse Current

Vs. Reverse Voltage (Per Leg)
1000
Junction Capacitance - C T (pF)
Instantaneous Forward Current - IF (A)
100
1
0.2
0.4
0.6
0.8
1.2
1.4
1.6
1.8
TJ = 25C
100
10
20
40
60
80
100
Forward Voltage Drop - V FM (V)
Reverse Voltage - VR (V)
Fig. 1 - Max. Forward Voltage Drop Characteristics

(Per Leg)
Fig. 3 - Typical Junction Capacitance

Vs. Reverse Voltage (Per Leg)
Thermal Impedance Z thJC (C/ W)
10
D = 0.75
D = 0.50
D = 0.33
D = 0.25
D = 0.20
PDM
t1
0.1
Notes:
Single Pulse
(Thermal Resistanc e)
0.01
0.00001
0.0001
0.001
t2
1. Duty factor D = t 1/ t 2
2. Peak TJ = PDM x Z thJC+ TC
0.01
0.1
10
t 1 , Rectangular Pulse Duration (Sec onds)
Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg)
www.irf.com

10
140
Average Power Loss - (Watts)
Allowable Case Temperature - (C)
150
DC
130
Square wave (D = 0.50)
Rated VR applied
120
110
D = 0.20
D = 0.25
D = 0.33
D = 0.50
D = 0.75
DC
RMSLimit
see note (2)
100
10
12
14
16
Average Forward Current - I F(AV) (A)
Fig. 5 - Max. Allowable Case Temperature

Vs. Average Forward Current (Per Leg)
Non-Repetitive Surge Current - I FSM (A)
10
12
14
16
Average Forward Current - I F(AV) (A)
Fig. 6 - Forward Power Loss Characteristics

(Per Leg)
1000
At Any Rated Load Condition
And With Rated VRRM Applied
Following Surge
100
10
100
1000
10000
Square Wave Pulse Duration - t p (microsec)
Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg)
(2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ;

Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6);
PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = rated VR
www.irf.com

Outlines Table
Conform to JEDEC outline D2Pak (SMD-220)

Dimensions in millimeters and (inches)
Modified JEDEC outline TO-262

www.irf.com

Part Marking Information

D2PAK
THIS IS A MBRB20100CTPbF
LOT CODE 8024
ASSEMBLED ON WW 02, 2000
INTERNATIONAL
RECTIFIER
LOGO
PART NUMBER
MBRB20100CT
DATE CODE
ASSEMBLY
LOT CODE
TO-262
EXAMPLE: THIS IS A MBR20100CT-1PbF
LOT CODE 1789
ASSEMBLED ON WW 19, 1999
INTERNATIONAL
RECTIFIER
LOGO
ASSEMBLY
LOT CODE
YEAR 0 = 2000
WEEK 02
P = LEAD-FREE
PART NUMBER
DATE CODE
YEAR 9 = 1999
WEEK 19
P = LEAD-FREE
Tape & Reel Information
www.irf.com

Ordering Information Table

Device Code
MBR
1
20
100
Essential Part Number
yB
= D2Pak
y none = TO-262
CT
-1
TRL
6 none
6 = -1
80 = 80V
Current Rating (20 = 20A)
Voltage Ratings
90 = 90V
CT
100 = 100V
6
7
= Essential Part Number
y none = D2Pak
2 =B
y -1
2 none
= TO-262
y none = Tube (50 pieces)

y TRL = Tape & Reel (Left Oriented - for D2Pak only)
y TRR = Tape & Reel (Right Oriented - for D2Pak only)
y none = Standard Production

y PbF = Lead-Free (for TO-262 and D2Pak tube)
yP
= Lead-Free (for D 2Pak TRR and TRL)
Data and specifications subject to change without notice.

This product has been designed and qualified for Industrial Level and Lead-Free.
Qualification Standards can be found on IR's Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7309
Visit us at www.irf.com for sales contact information. 01/07
www.irf.com

MBR 20100

Uploaded by

Copyright:

Available Formats

MBR 20100

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

MBR 20100

Uploaded by

Copyright:

Available Formats

Bulletin PD-21019 rev.

Major Ratings and Characteristics

IF(AV) Rectangular waveform

Center tap TO-220, D2Pak and TO-262 packages

MBRB20...CTPbF, MBR20...CT-1PbF Series

Absolute Maximum Ratings

@ TC = 133 C, (Rated VR)

Rated VR, square wave, 20kHz

IRRM Peak Repetitive Reverse

Non-Repetitive Avalanche Energy

Max. Forward Voltage Drop

Max. Instantaneus Reverse Current

Forward Slope Resistance

Max. Junction Capacitance

VR = 5VDC (test signal range 100Khz to 1Mhz) 25C

Typical Series Inductance

Measured from top of terminal to mounting plane

dv/dt Max. Voltage Rate of Change

Max. Storage Temperature Range

RthJC Max. Thermal Resistance

RthCS Typical Thermal Resistance

C/W Mounting surface, smooth and greased

RthJA Max. Thermal Resistance

Case style D2Pak

Case style TO-262

MBRB20...CTPbF, MBR20...CT-1PbF Series

Reverse Current - IR (mA)

Reverse Voltage - VR (V)

Fig. 2 - Typical Values Of Reverse Current

Instantaneous Forward Current - IF (A)

Forward Voltage Drop - V FM (V)

Reverse Voltage - VR (V)

Fig. 1 - Max. Forward Voltage Drop Characteristics

Fig. 3 - Typical Junction Capacitance

Thermal Impedance Z thJC (C/ W)

t 1 , Rectangular Pulse Duration (Sec onds)

Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg)

MBRB20...CTPbF, MBR20...CT-1PbF Series

Average Power Loss - (Watts)

Allowable Case Temperature - (C)

see note (2)

Average Forward Current - I F(AV) (A)

Fig. 5 - Max. Allowable Case Temperature

Non-Repetitive Surge Current - I FSM (A)

Average Forward Current - I F(AV) (A)

Fig. 6 - Forward Power Loss Characteristics

Square Wave Pulse Duration - t p (microsec)

Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg)

(2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ;

MBRB20...CTPbF, MBR20...CT-1PbF Series

Conform to JEDEC outline D2Pak (SMD-220)

Modified JEDEC outline TO-262

MBRB20...CTPbF, MBR20...CT-1PbF Series

Part Marking Information

Tape & Reel Information

Dimensions in millimeters and (inches)

MBRB20...CTPbF, MBR20...CT-1PbF Series

Ordering Information Table