Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
214 views3 pages

Engg/10/s4 Reinforced Concrete Design To Bs 8110: Contract Ref

Uploaded by

Godfrey James Machota

This document summarizes the design of a one-way reinforced concrete slab according to BS 8110. It describes a slab panel on the first floor with dimensions of 10m x 4m. The slab was designed for a characteristic dead load of 8.1 kN/m2 and imposed load of 2 kN/m2. Reinforcement details are provided for the short span reinforcement at supports and spans, as well as the distribution reinforcement. The design and deflection checks are summarized to have passed requirements.

Copyright:

Attribution Non-Commercial (BY-NC)
Download as XLS, PDF, TXT or read online from Scribd
Download as xls, pdf, or txt

Engg/10/s4 Reinforced Concrete Design To Bs 8110: Contract Ref

Uploaded by

Godfrey James Machota
214 views3 pages
This document summarizes the design of a one-way reinforced concrete slab according to BS 8110. It describes a slab panel on the first floor with dimensions of 10m x 4m. The slab was designed for a characteristic dead load of 8.1 kN/m2 and imposed load of 2 kN/m2. Reinforcement details are provided for the short span reinforcement at supports and spans, as well as the distribution reinforcement. The design and deflection checks are summarized to have passed requirements.

Original Description:

for designing one way slab

Original Title

One Way Slab

Copyright

© Attribution Non-Commercial (BY-NC)

Available Formats

XLS, PDF, TXT or read online from Scribd

Did you find this document useful?

Is this content inappropriate?

This document summarizes the design of a one-way reinforced concrete slab according to BS 8110. It describes a slab panel on the first floor with dimensions of 10m x 4m. The slab was designed for a characteristic dead load of 8.1 kN/m2 and imposed load of 2 kN/m2. Reinforcement details are provided for the short span reinforcement at supports and spans, as well as the distribution reinforcement. The design and deflection checks are summarized to have passed requirements.

Copyright:

Attribution Non-Commercial (BY-NC)
Download as XLS, PDF, TXT or read online from Scribd
Download as xls, pdf, or txt
214 views3 pages

Engg/10/s4 Reinforced Concrete Design To Bs 8110: Contract Ref

Uploaded by

Godfrey James Machota
This document summarizes the design of a one-way reinforced concrete slab according to BS 8110. It describes a slab panel on the first floor with dimensions of 10m x 4m. The slab was designed for a characteristic dead load of 8.1 kN/m2 and imposed load of 2 kN/m2. Reinforcement details are provided for the short span reinforcement at supports and spans, as well as the distribution reinforcement. The design and deflection checks are summarized to have passed requirements.

Copyright:

Attribution Non-Commercial (BY-NC)
Download as XLS, PDF, TXT or read online from Scribd
Download as xls, pdf, or txt
You are on page 1/ 3

Contract

Project

REINFORCED CONCRETE DESIGN TO BS Ref: 8110


Section

engg/10/s4

Member

Date Page No.

Prepared NOEL Checked T.E

Company Project Title REINFORCED CONCRETE DESIGN TO BS 8110

Job Reference Design Engineer Date Project Description (if any)

engg/10/s4 NOEL

REINFORCED CONCRETE DESIGN TO BS 8110

Design Codes

BS 5950 BS 8110

Design Aids

SCALE Microsoft Excel AutoCAD

217582777.xls.ms_office

Contract

S4

REINFORCED CONCRETE DESIGN TO BS Ref: 8110


Section DESIGN OF ONE-WAY SPANNING RC SLAB Member Date Page No. Prepared

engg/10/s4

NOEL Checked

DESIGN OF ONE WAY REINFORCED CONCRETE SLAB TO BS8110 Design in accordance with BS 8110 Panel Identity : FIRSTFLOOR Location: Material Properties & Dimensions 10.000m => 4.000m => Exposure Conditions Reinforcement size Section size Loading Self Weight = False Ceiling = Terrazzo/Screed = Ceiling Plaster = Basic Services = Partition Load = Any other Load = Characteristic Dead Load, gk = Characteristic Imposed Load, qk = Design Load = 3.60 kN/m2 0.00 1.00 0.00 1.00 2.50 0.00 Specify - incidental 8.10 kN/m2 2.00 kN/m2 14.54 kN/m2 Support Conditions: One Way Slab Mild Main = 16 150 117 mm mm mm fy = fcu = lx = ly = ly / lx = 410 25 4.000 10.000 2.500 N/mm2 N/mm2 m m One Way Slab Cover = Distribution = width, b = Eff. depth, d2 = 25 10 1000 101 mm mm mm mm

depth, h = Eff. Depth, d1 =

One Way Slab Internal Span of Continuous Slab For Internal Span of Continuous Slab Support Moment = Span Moment = 14.7 14.7 kNm kNm

Reinforcement Design As, min = 225.0 mm2 M M/fcubd2 Support Span 14.7 14.7 0.043 0.043 z/d 0.940 0.940 z 110.0 110.0 As,req.(mm2) As,pr.(mm2) Bar Dia. Bar Spacing 374 10 200 393 374 225 Deflection Check Basic l/d = Service Stress, fs = Modification Factor, Mf = 26 243.8 N/mm2 1.536 Act. s/d = All. s/d = 34.19 39.94 393 314 10 10 200 250

Distribution Reinforcement

Deflection Control: Deflection ok!

DESIGN SUMMARY Slab Panel : FIRSTFLOOR designed as ONE - Way Spanning Slab Internal Span of Continuous Slab Slab designed for Dead Load of 8.1 kN/m2 and Imposed Load of 2 kN/m2 Slab Thickness =150mm with cover to Main reinforcement of 25mm Short Span Reinforcement: At Support Y10 at 200mm centres At Span Y10 at 200mm centres Distribution Reinforcement: Y10 at 250mm centres

PASS! PASS! PASS!

217582777.xls.ms_office 3/19/2014

Contract

S4 (2)

REINFORCED CONCRETE DESIGN TO BS Ref: 8110


Section DESIGN OF ONE-WAY SPANNING RC SLAB Member Date Page No. Prepared

engg/10/s4

NOEL Checked

DESIGN OF ONE WAY REINFORCED CONCRETE SLAB TO BS8110 Design in accordance with BS 8110 Panel Identity : FIRST FLOOR Location: Material Properties & Dimensions 10.000m => 4.000m => Exposure Conditions Reinforcement size Section size Loading Self Weight = False Ceiling = Terrazzo/Screed = Ceiling Plaster = Basic Services = Partition Load = Any other Load = Characteristic Dead Load, gk = Characteristic Imposed Load, qk = Design Load = 3.60 kN/m2 0.00 1.00 0.00 1.00 2.00 0.00 Specify - incidental 7.60 kN/m2 2.00 kN/m2 13.84 kN/m2 Support Conditions: One Way Slab Mild Main = 16 150 122 mm mm mm fy = fcu = lx = ly = ly / lx = 410 25 4.000 10.000 2.500 N/mm2 N/mm2 m m One Way Slab Cover = Distribution = width, b = Eff. depth, d2 = 20 10 1000 106 mm mm mm mm

depth, h = Eff. Depth, d1 =

One Way Slab End Span of Continuous Slab For End Span of Continuous Slab Support Moment = Span Moment = 19.0 19.0 kNm kNm

Reinforcement Design As, min = 225.0 mm2 M M/fcubd2 Support Span 19.0 19.0 0.051 0.051 z/d 0.939 0.939 z 114.6 114.6 As,req.(mm2) As,pr.(mm2) Bar Dia. Bar Spacing 466 10 150 524 466 225 Deflection Check Basic l/d = Service Stress, fs = Modification Factor, Mf = 23 228.0 N/mm2 1.502 Act. s/d = All. s/d = 32.79 34.55 524 314 10 10 150 250

Distribution Reinforcement

Deflection Control: Deflection ok!

DESIGN SUMMARY Slab Panel : FIRST FLOOR designed as ONE - Way Spanning Slab End Span of Continuous Slab Slab designed for Dead Load of 7.6 kN/m2 and Imposed Load of 2 kN/m2 Slab Thickness =150mm with cover to Main reinforcement of 20mm Short Span Reinforcement: At Support Y10 at 150mm centres At Span Y10 at 150mm centres Distribution Reinforcement: Y10 at 250mm centres

PASS! PASS! PASS!

217582777.xls.ms_office 3/19/2014

You might also like