INFORMATION BROCHURE

(First Semester 2014-2015)

for admission to POSTGRADUATE AND RESEARCH PROGRAMMES

INDIAN INSTITUTE OF TECHNOLOGY DELHI HAUZ KHAS, NEW DELHI-110016

Contents

Message to the Applicants from the Dean, Academics Important Dates 1. Introduction 2. Credit System 3. Admission Procedures and Requirements (I) Doctor of Philosophy (Ph.D.) (II)M.Tech / M.S. (Research) / M.Des Programmes 4. Reservation of seats 5. Registration for courses 6. Hostel accommodation 7. Fees and payments (a) Institute dues payable by 2014 entry Ph.D./M.Tech/M.S.(R)/M.Des students (b) Mess dues payable by 2014 entry students 8. Financial assistance and other support 9. General guidelines 10. Application procedure 11. Refund of fees 12. Important instructions for filling application form 13. Contact telephone/FAX nos. Annexure-I Research Programmes : Doctor of Philosophy (Ph.D.) Annexure -II M.Tech./M.S.(Research) and M.Des. Programmes offered Annexure-III Options for M.Tech., M.S.(Research) & M.Des. Programmes according to the discipline in which the candidate holds the Qualifying Degree Annexure-IV GATE Score cut off for admission to non-sponsored full-time M.Tech. Programmes in the Academic Year 2013-2014 Some Important Information for Candidates

(iii) (iv) 1 2 3 6 9 9 9 9 9 10 10 12 13 13 13 14 15 23 25 27 30

ii

Message to the Applicants from Dean, Academics

Dear Applicant, I am very happy to note that firstly you are planning to pursue your post graduate education and secondly you are considering IIT Delhi as one of your choices. India is fast emerging as a knowledge economy and in the next decade or so would emerge as a major centre for research and technology development. In this context your decision to pursue post graduate education would definitely have a significant impact on your long term career prospects. IIT Delhi with its 39 M.Tech., 26 Ph.D, 9 MS(R), 3 M.Sc, 2 MBA and M.Des programmes offers you an extensive choice of specialization. The strength of the Institute is its 450+ highly qualified faculty due to which it is continuously ranked among the top 50 technical institutions globally (Times Higher Education Supplement http:// www.timeshighereducation.co.uk) In the last few years we have been constantly working towards making our rules, regulations and policies governing post graduate education flexible and attractive to potential candidates. I am writing this letter to make you aware of some major policy changes in the last couple of years. 1. At IIT Delhi most academic departments/centres offer M.Tech. and PhD programmes while some of them also offer an MS(R) programme. Major policy changes now permit the student to switch from one programme to another anytime after one semester of joining. For example, a candidate joining an M.Tech. programme can apply for switch to a PhD programme in the same department (or even in another eligible department) after completing 12 credits of courses with a minimum GPA of 8.0. All his/her credits, if relevant to the new programme, can be transferred and thus make his/her transfer to the new programme as a student with advanced standing. Similar flexibility exists for switching between other programmes. Last year IIT Delhi initiated sponsored research activity worth approximately Rs.100 crores which is expected to grow further this year. Candidates wanting to gain project experience along with post graduate education can apply and join one of the sponsored projects simultaneously with admission to the post graduate degree. Apart from gaining experience, various schemes provide for much higher assistantship amounts when you participate in the sponsored research projects. One significant policy change that has been adopted is the recruitment for the project can also be carried out by the same department research committee (DRC) that admits students to the post graduate programmes. IIT Delhi is striving towards ensuring each of its Ph.D students and a good number of post graduate students have an opportunity to present a paper and attend at least one international conference before they graduate. A number of initiatives taken in the last couple of years have yielded significant results. Visit http://www.iitd.ac.in for other details.

2.

3.

There are many more things I would like to share with you but I would wait for your joining IIT Delhi. Once accepted for admission in one of your preferred post graduate programmes, I would like to see you in the Orientation Programme between 19th and 21st July 2014. Yours sincerely Prof. Anurag Sharma Dean, Academics, IIT Delhi

iii

Important Dates
Submission of online application commences on Last date for submission of online application and application fee Range of dates for Test / Interviews Date of Orientation for new Students Date of Registration for new Students Commencement of classes March 12, 2014 (12.00 Noon) April 04, 2014 (04.00 P.M.) May 13, 2014 - June 10, 2014 July 19, 2014 July 21, 2014 July 22, 2014

1. INTRODUCTION
Indian Institute of Technology Delhi is one of the seven established Institutes of Technology in India, the others being Kharagpur, Bombay, Madras, Kanpur, Guwahati and Roorkee. Recently, Government has set up nine more Institutes of Technology. These Institutes have been created as centres of excellence for higher training, research and development in science, engineering and technology. Established as a College of Engineering in 1961, the Institute was declared an Institute of National Importance under the Institutes of Technology (Amendment) Act, 1963 and renamed Indian Institute of Technology Delhi. It was then accorded the status of a university with powers to decide its own academic policy, to conduct its own examinations and to award its own degrees. The Institute offers undergraduate and postgraduate programmes through its Departments and Centres. The Institute admits about 850 students for the undergraduate (B.Tech) programmes and about 1400 students for the postgraduate (M.Sc./M.Tech./ M.S.(Research)/ M.Des./ M.B.A./Ph.D.) programmes every year. Intellectual alertness, creativity and talent for innovation go into the making of an engineering leader today and continue to be essential for professional competence tomorrow. The candidates selected for admission live in pleasant surroundings of intellectually stimulating campus, use the most modern equipment and laboratory facilities available and go through the specialised courses designed to meet the challenge of the future. The teaching methods rely on direct personal contact between the teachers and the students. Living in such an environment with people having similar goals and aspirations is an exciting experience during ones academic life and is of considerable value in ones professional career. Location: IIT Delhi is situated at Hauz Khas in South Delhi, bounded by the Sri Aurobindo Marg on the East, the Jawaharlal Nehru University complex on the West, the National Council of Educational Research & Training on the South and the outer Ring Road on the North. The Institute campus is about 19 kms away from the Delhi Main Railway Station, 14 kms from the New Delhi Railway Station, 21 kms from the Inter State Bus Terminal, 22 km from Indira Gandhi International Airport and 10 kms from the domestic terminal of Delhi Airport. The nearest Metro Station is Hauz Khas. Campus: IIT Delhi is a residential Institution and provides residential facilities to the students as well as the teaching staff as per availability. The Institute campus area extends to 320 acres with many interesting topographical features, imaginatively laid out with picturesque landscape, numerous buildings and wide roads, the campus presents a spectacle of harmony in architecture and natural beauty. The main academic building houses various teaching, research and Library facilities. Though each Department/Centre is a separate entity, all the Departments/Centres together constitute an integrated complex. Large lecture theatres with modern amenities and equipment for projection have been located adjacent to two or more Departments for common use. The campus also provides such amenities as staff clubs, hospital, shopping centres, banks, ATMs, post office, community centre, stadium and playing fields. The Students Activities Centre provides all facilities for students extracurricular and physical development. The central two-storeyed block with a swimming pool and a gymnasium hall has amenities such as squash courts, hobbies workshop, seminar rooms, music rooms and other multipurpose rooms for reading and indoor games. The amphitheater constructed in modern style is an added amenity at the centre.

2. CREDIT SYSTEM
Education at the Institute is organised around the credit system of study. The prominent features of the credit system are process of continuous evaluation of a students performance, and a flexibility to allow a student to progress at an optimum pace suited to his/her ability or convenience subject to fulfilling minimum requirement for continuation. Each course has a certain number of credits which describe its weightage. A students performance is measured by the number of credits that he/she has completed satisfactorily. A minimum Grade Point Average is required to be maintained for satisfactory progress. The minimum academic requirements for the various degrees including minimum & maximum credits to be registered in a particular semester are indicated in the Prospectus for the year 2014-2015 which will be supplied to the admitted candidates on the date of Orientation. Every course is co-ordinated by a member of the teaching staff of the Department which offers the course in a given semester. This Faculty member is called the Course Coordinator. (S)he has full responsibility for conducting the course, co-ordinating the work of the other members of the faculty involved in that course and for holding tests and assignments and awarding grades. For any difficulty a student is expected to approach the Course Co-ordinator for advice and clarification.

3. ADMISSION PROCEDURES AND REQUIREMENTS I. Ph.D. Programmes

The award of the Ph.D. degree is in recognition of high achievements, independent research and application of scientific knowledge to the solution of technical and scientific problems. Creative and productive inquiry is the basic concept underlying the research work. The details of research programmes in various Departments/ Centres are given in Annexure-I. Course work and other academic requirements: In order to overcome any deficiency in the breadth of fundamental training or proper foundation for advanced work, special make up or pre-doctoral courses are given by each Department/ Centre. These courses are given either by faculty member or by guest speakers and specialists in the profession. Normally candidates having a B.Tech./M.Sc./M.A. or equivalent degree are required to complete a minimum of 12* credits with a minimum required GPA of 7.5. M.Tech or equivalent degree holders are required to complete a minimum of 6* credits with a minimum required GPA of 7.5. *A Department/Centre may specify a higher credit requirement for all their PhD programmes and/or require an individual scholar to complete a larger number of credits based on his/her background and preparation level. Admission to the PhD Programmes: Admission to the Ph.D. programmes is normally made on the basis of an interview conducted by the Department/Centre concerned through its Department Research Committee (DRC) / Centre Research Committee (CRC). DRC/CRC may decide to conduct a written test as well to screen the candidates. Applications are invited from candidates by advertising the programmes in Employment News/leading newspapers in March for the first semester and in October for the second semester every year. Admission schedule: Normally, Ph.D. programmes are advertised in the month of March and October each year in the Employment news as well as in leading newspapers and admissions are carried out in the months of May and December. Further, admission to Ph.D programme is possible any time in the year through DRC/CRC. Ph.D. scholars can join the institute at any time of the year though the course registration will be possible only at the beginning of the subsequent semester. Such candidates must also fulfill the required academic qualification/ experience at the time of interview. They must join the institute within 4 weeks after the issue of admission offer unless specifically permitted otherwise. Admission is subject to vacancy being available in the relevant specializations. Duration of the programmes: Minimum period of registration required for students with M.Tech. or equivalent qualifications is 2 years whereas those with B.Tech. or equivalent qualifications is 3 years. All candidates are allowed a maximum of 7 years for submission of their thesis. I(a) Minimum Qualifications for admission to Full-time PhD Programmes: Table-1 defines the minimum qualifications required for admission to fulltime PhD programmes at IIT Delhi for General/OBC (Non-creamy Layer) category students. Please note: These are Institute minimum requirements and any Department/Centre operating through their DRC/CRC can specify higher short-listing criteria than what is specified here. This table includes most of the degrees but each DRC/CRC is free to specify the qualifications and disciplines acceptable for admission to their programmes. Candidates in the final year of their programmes and who expect to complete all their qualifying degree requirements before the date of registration eligible to apply for admissions. For shortlisting purposes, their performance until the preceding semester (preceding year if their programmes are year based) would be considered but their admission would be provisional, subject to their meeting the minimum eligibility criteria after their final qualifying examination 3

results are announced.

Table 1: Minimum Qualification for Admission to full-time PhD Programmes

Qualifying Degree Minimum performance in Qualification degree for General/OBC (Non-Creamy Layer) category students 60% marks or 6.75 CGPA on a 10-point scale 60% marks or 6.75 CGPA on a 10-point scale Qualification through national level examination requirements

M.Tech./M.E./M.D. or equivalent M.Sc./MBA/M.A./MBBS or equivalent

Nil GATE score >= 300 or qualifying or equivalent score whichever is higher CSIR/UGC NET/ICAR/ICMR/DST INSPIRE fellowship Qualified GATE/CSIR/UGC NET/ICAR/DST INSPIRE fellowship

B.E./B.Tech or equivalent

70% marks or 7.5 CGPA on a 10-point scale

Exemptions, relaxations and clarifications:

1. For SC/ST/PH category students, minimum performance in the qualifying degree with postgraduate qualifications (first two rows) is relaxed from 60% to 55% (6.75 to 6.25) and GATE score requirement from 300 to 200. 2. Qualifying degree performance is computed by aggregating performance over all the semesters/years of the qualifying degree. 3. In respect of MA, M.Sc. and/or B.Techs. from IITs graduating with a CGPA of 8.0 or above, the requirement of qualification through a national examination (row three in Table 1) is waived off. 4. Students from CFTIs (Centrally Funded Technical Institutions (IITs, NITs, IIITs, etc)) having CPI/ CGPA 7.00 (at 10.00 scale) at the end of 3rd year are also eligible for admission to PhD. The requirement of qualification through a national examination (row three in Table 1) is waived off. 5. For assistantship purposes candidates with MBBS qualification will be considered equivalent to M.Tech. 6. For candidates with M.A. degree in English, a 5% relaxation in marks or 0.5 relaxation in CGPA may be permitted for admission to the PhD programme in Humanities & Social Sciences. 7. Candidates holding MBA degree, are eligible for applying to the PhD programme in the Department of Management Studies.

I(b) Minimum Qualifications for admission to Part-time and Sponsored (full-time) PhD Programmes:
The following eligibility conditions apply for the Part-time and sponsored full-time programmes. 1. Only employees of Public Sector Undertakings or Government Departments or Research and Development Organizations or Private Industries (approved by Faculty Boards) are eligible for admission to these programmes. 2. All candidates should have a minimum experience of two years as on date of registration. 3. Minimum qualification for these candidates is the same as for full-time candidates except that the 4

requirement of qualifying in a national examination (column 3 in Table 1) is waived off. 4. For part-time candidates from outside NCR (or at a radial distance of more than 50 KMs from IIT Delhi), there is a minimum residency requirement of 6 months. DRC/ CRC may specify a higher residency requirement based on the courses recommended as well as the background. Sponsored (full-time) candidates seeking admission to a Ph.D programme on the basis of study leave, must submit a Sponsorship Certificate on a proper letterhead from the appropriate authority in the organization clearly stating the following: for the period of his/her studies in the programme, the candidate would be treated as on duty with usual salary and allowances, and that he/she will be fully relieved and granted study leave for a minimum period of 3 years (2years for M.Tech. and equivalent degree holders).

5.

6. Part-time candidates are required to submit a No Objection Certificate on a proper letter head from the appropriate authority in the organization clearly stating the following: the candidate is permitted to pursue studies on a part-time basis that his/her official duties permit him/her to devote sufficient time for research. facilities for research in the candidates field of research are available at the candidates place of work; and he/she will be fully relieved from duty and permitted to reside at the Institute for the period required residency (This is not a requirement for candidates who are working in NCR or in organizations located within a distance of 50 KMs from the Institute).

II. M.TECH./M.TECH (High Value Assistantship)/M.S.(Research)/M.Des. Programmes

The Institute runs a number of M.Tech./M.Tech (High Value Assistantship) and M.S. (Research) programmes offered by various Departments and Centres. M.Tech. and M.S.(R) programmes mainly differ in the fraction of course and project/thesis credits. M.Tech. progarmmes have two-thirds of the credits for the course work while MS(R) programmes have two-thirds of the credits for the thesis component. Some of these programmes are interdisciplinary programmes (IDP) where multiple academic units are involved in running of each of these programmes. Also in these IDPs, students with different backgrounds are eligible to be admitted to the programme. IDPs are administered through a Programme Executive Committee or PEC. Master of Design (or M.Des. Programme) in Industrial Design is also offered as an Interdisciplinary Programme. IIT Delhi also offers a number of industrysponsored programmes. In these programmes either industry supports full-time students recruited by the Institute or sponsors their employees for the programme. In either case, regular Industry feedback is obtained to adopt and improve the curriculum to the needs of the industry. Industry sponsors also play a significant role in defining the projects. The listing of all the Masters' programmes is given in AnnexureII. Flexibility of movement: Very recently, IIT Delhi has adopted major changes in its rules and regulations. These changes enable easy mobility of students from M.Tech. to PhD, M.Tech to MS(R), MS(R) to M.Tech. and MS(R) to PhD. With these changes, it is now possible for a student to join M.Tech./MS (R) at IIT Delhi and then they can apply for change to a research programme if they feel confident. In this process save considerable amount of time to complete Ph.D. Eligibility for programmes: B.Tech. or M.Sc. degree holders of a particular discipline are eligible for admission to one or more programmes. The list of programmes to which a graduate of a specific discipline is eligible to apply, is given in Annexure III. Programme duration: The minimum duration of M.Tech., M.S.(Research) and M.Des. programmes is 4 semesters (24 months) for full time and 6 semesters (36 months) for part-time programmes and M.Tech.(High Value Assistantship) programmes. Admission schedule: Normally, M.Tech/ M.Tech.(High Value Assistantship)/ MS(R)/M.Des. programmes are advertised in the month of March each year in the Employment news as well as in leading newspapers and admissions are carried out in the month of May. MS(R) programmes and M.Tech.(High Value Assistantship) are also advertised in the month of October followed by admissions in December. Further, just like Ph.D, admission, admission to MS(R) programmes is also possible at any time in the year through DRC/CRC/PEC. They can be admitted to the institute at any time of the year, though the course registration in such cases will be possible only at the beginning of the subsequent semester. Such candidates must also fulfill the required academic qualifications /experience at the time of interview. They must join the institute within 4 weeks after the issue of admission offer unless specifically permitted otherwise. Admission is subject to vacancy being available in the relevant specializations. Part-Time programmes: IIT Delhi offers most of its M.Tech. /MS(R) programmes in the part-time mode for working professionals. They are expected to complete their credit requirements in six semesters (maximum of ten semesters) by registering for a lower load than full-time students in each semester. Departments /Centres offer most of the core courses between 8:00 AM to 10:00 AM to enable these working professions to attend classes as well as continue with their full-time employment. Please note it may not always be feasible to slot all courses of the programme in the morning and those candidates applying for part-time programmes should be flexible to take courses at other times if required.

II(a) Minimum qualifications and procedure for admission to Full-time M.Tech./ MS(R) /M.Des. Programmes:
Table 2 defines the minimum qualifications required for admission to full-time M.Tech./ MS(R)/ 6

M.Des programmes at IIT Delhi for General/OBC (Non-creamy Layer) category students. In this context please note: These are Institute minimum requirements and any Department/Centre operating through their DRC/CRC/PEC can specify higher short-listing criteria than what is specified here. This table includes many degrees for eligibility but each DRC/CRC/PEC is free to specify the qualifying degree disciplines as well as GATE disciplines acceptable for admission to their programmes. Admission to M.Tech/MS(R)/M.Des programmes are carried out by first short-listing the eligible candidates (meeting the minimum performance in their qualifying degree - Column 3 of Table 2) and scoring above a GATE / CEED cut off specified for that programme and then conducting written test / interview at IIT Delhi. GATE / CEED cut offs for various Programmes last year (admission year 2012) is tabulated in Annexure IV. In such cases, GATE score is given a minimum weight of 70% in judging the overall performance of the candidates appearing for interview. DRC/CRC/PEC is empowered to offer direct admission for M.Tech./MS(R) programmes without interview to exceptionally meritorious students. The minimum performance required by such candidates is listed in Table 2. This is the Institute minimum and again DRC/CRC/PEC is free to set higher eligibility criteria for direct admissions without interview. DRC/CRC/PEC may also decide not to offer any direct admissions without interviews. Candidates in the final year of their programmes and who expect to complete all their qualifying degree requirements before third week of July 2014 are eligible to apply for admission. For short- listing purposes, their performance till the preceding semester (preceding year if their programmes are year based) would be considered but their admission would be provisional, subject to their meeting the minimum eligibility criteria after their final qualifying examination results are announced.

Table 2: Minimum Qualification for Admission to full-time M.Tech./MS(R)/M.Des. Programmes Programme & Admission type Qualifying Degree Minimum performance in the qualifying degree for General/ OBC (Non-Creamy Layer) category students 75% marks or 8.5 CGPA on a 10-point scale 60% marks or 6.75 CGPA on a 10- point scale 75% marks or 8.5 CGPA on a 10-point scale 60% marks or 6.75 CGPA on a 10- point scale National level examination requirements

M.Tech./ M.Tech.(High Value Assistantship)/ MS(R) (Direct Admission M.Tech./ M.Tech.(High Value Assistantship)/ MS(R) (Admission with test/interview) M. Des. (Direct Admission without test/interview) M. Des. (Admission with test/interview)

B.E./B.Tech/ M.Sc or equivalent

B.E./B.Tech/ M.Sc or equivalent

GATE score > = 300 or qualifying score whichever is higher GATE score > = 300 or qualifying score whichever is higher CEED Percentile >=75

B.E./B.Tech/ M.Sc or equivalent B.E./B.Tech/ M.Sc or equivalent

CEED Percentile >=75

Exemptions, relaxations and clarifications

1. For Direct admission of SC/ST/PH category students (row 2 & 4 of Table 2), minimum performance in the qualifying degree is relaxed from 75% to 70% (8.5 to 7.5) and GATE score requirement from 300 to 200. For M.Des programme CEED score is relaxed from 75 percentile to 7

50 percentile. 2. For admission with interview of SC/ST/PH category students (row 3 & 5 of Table 2), minimum performance in the qualifying degree is relaxed from 60% to 55% (6.75 to 6.25) and GATE score requirement from 300 to 200. For M.Des programme CEED score is relaxed from 75 percentile to 50 percentile. 3. Qualifying degree performance is computed by aggregating performance over all the semesters/years of the qualifying degree. 4. For all B.Techs. from IITs graduating with a CGPA of 8.0 or above, the requirement of qualification through GATE is waived off. 5. Candidates with AMIE or Grad. IETE qualifications may also be considered for admission to the M.Tech. Programmes; however, if provisionally selected for admission based on their AMIE/Grad IETE performance, they would be required to complete 24 valid undergraduate credits prescribed by the concerned DRC/CRC/ PEC and clear the GATE examination before being actually admitted to the M.Tech/ MS(R)/M.Des. Programmes.

II(b) Minimum Qualifications for admission to Part-time and Sponsored (full-time) M.Tech./MS(R) Programmes:
The following additional eligibility conditions and relaxations apply for the Part-time and sponsored fulltime programmes. 1. Only employees of Public Sector Undertakings or Government Departments or Research and Development Organizations or Private Industries (approved by Faculty Boards) are eligible for admission to these programmes.

2. Employees of only those organizations which are located within 50 KMs radius of IIT Delhi are eligible to be considered for admission to part-time M.Tech./ MS(R) programmes 3. All candidates should have a minimum experience of one year as on d a t e o f r e g i s t r a t i o n . 4. Minimum qualification for these candidates is the same as for full-time candidates except that the requirement of qualifying in a national examination (column 4 in Table 2) is waived off. 5. Part-Time M.Tech (Evening) Programme in Energy And Environmental Management is a special programme for working professions only. In this programme, lecture classes are held on week days in the evening between 1830 to 2030 hrs. and laboratory classes on Saturdays/ Sundays in the forenoon.

6. Sponsored (full-time) candidates seeking admission to a M.Tech./MS(R)/M.Des. programme on the basis of study leave, must submit a Sponsorship certificate on a proper letterhead from the appropriate authority in the organization clearly stating the following: a. for the period of his/her studies in the programme, the candidate would be treated as on duty with usual salary and allowances, and b. that he/she will be fully relieved and granted study leave for a minimum period of 2 years 7. Part-time candidates are required to submit a No Objection Certificate on a proper letter head from the appropriate authority in the organization clearly stating the following: the candidate is permitted to pursue studies on a part-time basis that his/her official duties permit him/her to devote sufficient time for studies that he/she will not be transferred to any other place during the period of study

4. RESERVATION OF SEATS:
(a) 15% seats are reserved for SC and 7.5% for ST candidates. (b) 27% seats are reserved for Non-Creamy layer OBC candidates. All candidates applying for admission under this category should produce the OBC (Non-Creamy Layer) Certificate applicable for OBCs in the Central list at the time of interview. For details and specimen form visit : http://www.iitd.ac.in. (c) 3% seats are reserved for the physically handicapped persons in the Postgraduate courses and Ph.D. Programmes. Note : All shortlisted candidates applying for admission under the reserved categories are required to produce the relevant certificate at the time of interview.

5. REGISTRATION FOR COURSES

All students are required to report for Orientation and Central Registration before the commencement of each semester according to the schedule/procedure notified in advance. The students register themselves for the courses in consultation with the Course Coordinator. The courses to be run by the Departments are made known to the students before registration. On admission, the students should go through carefully the Departmental advice of courses for their discipline. They should also go through the Prospectus regarding the rules governing their academic duties and performance. In some Departments, the required performance levels for continuation of registration may be higher than those given in the Prospectus. The admitted students must acquire a copy of the departmental norms in such cases.

6. HOSTEL ACCOMMODATION
All post-graduate students admitted on full-time basis can, subject to availability, avail of residential facilities in the hostels. Delhi based and sponsored students admitted to M.Tech./MS(R)/M.Des. programmes have a lower priority in hostel accommodation. The Institute has nine boys hostels, two girls hostels and a hostel for married students. For married students, only a limited accommodation is available. Each hostel, except Married Research Scholar accommodation, is self-contained with amenities such as a reading room, an indoor games room, a lounge and a dining hall with mess. Hostel rooms are adequately furnished. The hostel for married students has one/two-room suite(s) with an attached bath and a kitchen for each resident family.

7. FEES AND PAYMENTS

(a) INSTITUTE DUES PAYABLE BY 2014 ENTRY PH.D./M.Tech/M.S.(R)/M.Des STUDENTS Table 3: Schedule of fee applicable for different programmmes in July 2014 admission.
M.Tech./MS(R)/M.Des. Students Receiving Institute/Project Assistantship or Teaching positions holders

CATEGORY General/OBC/PH SC/ST

TOTAL FEES 16335 11335

M.Tech/ M.Tech (High Value Assistantship) /MS(R)/M.Des./DIIT Students (Sponsored, FT, PT and Non Teaching position holders)

General/OBC/PH SC/ST
All Full Time / Part Time Ph.D. Students

36335 11335 14185 11685 110885 74252 9

General/OBC/PH SC/ST MBA Self Financing FT/PT Students General/OBC/PH Full Time General/OBC/PH Part Time

SC/ST Full Time SC/ST Part Time

10885 7585

Note: - Non-Hostlers need not to pay the Hostel Seat Rent of Rs. 4300/-. - Part - Time students are not to pay Hostel Seat Rent 4300/-. - SC/ST students are given 100% exemption from payment of tuition fee - The exact amount of fees and mode of payment will be indicated in the offer of admission. - The Institute Dues payable at the time of admission includes a refundable security deposit of Rs.2,000/(b) MESS DUES PAYABLE BY 2014 ENTRY STUDENTS Membership of associated mess is compulsory for those allotted Hostel accommodation. They will be required to pay Mess Dues at the time of joining as detailed in Table 4. Table 4: Mess Dues applicable at the time of joining the Mess for July 2014 admissions. Details Mess Security Deposit (Refundable) Mess Admission (one time payment)(Non refundable) Mess Advance (one time payment adjustable against mess dues) SCOOPS membership (one time payment)(Non refundable) Total Boys Rs. 10,000 Rs. 3,400 Rs. 16,500 Rs. 100 Rs.30,000 Girls Rs. 10,000 Rs. 3,400 Rs. 15,500 Rs. 100 Rs.29,000

8. FINANCIAL ASSISTANCE AND OTHER SUPPORT I. Ph.D. Programme

A scheme for the award of Teaching/Research Assistantship for providing financial assistance to the students exists. In terms of this scheme, those non-sponsored students who are admitted on full-time basis are considered for the award of Half Time Teaching/Research Assistantship. These rates have been significantly enhanced by the MHRD recently and are as indicated below: Table 5: Assistantship amounts for Full-time Institute Ph.D students Period of assistantship First 2 years of registration Next 2 years of registration Assistantship amount With B.Tech/B.E./M.Sc. or equivalent qualifications Rs. 16,000/- p.m. Rs.18,000/- p.m. With M.Tech./M.E./MBBS or equivalent qualifications Rs.18,000/- p.m. Rs. 20,000/- p.m. Hours/week assistance to be provided 8 8

Other conditions and benefits: In addition the full-time students enjoy a number of benefits but are also required to satisfy academic performance requirements for continuation of assistantship from semester to semester. The maximum duration for which assistantship can be awarded to a Ph.D. student is 4 years. In the first instance, the assistantship is awarded for one semester. Continuation of the assistantship during the subsequent semesters is contingent upon satisfactory academic performance and satisfactory performance in the discharge of responsibilities assigned under the assistantship scheme. For this purpose an SGPA of 7.00 at the end of a semester in respect of 10

those semesters when the student has been assigned course work will be considered as satisfactory performance. For details of SGPA calculation refer to the Institute Prospectus. All fulltime students participating in a sponsored project/consultancy project (in addition to their assistantship work) can be paid an honorarium of upto Rs. 10,000/- p.m. by the PI/CI of the project. All such work can be undertaken only with the consent of their supervisor(s). The faculty of an Engineering/Science College sponsored by his/her institution for pursuing Ph.D. at IIT Delhi and meeting all the academic requirements of full-time Institute assistantship can be considered by the DRC/CRC for the award of Institute Assistantship. This assistantship would be over and above the emoluments he/she may be getting from his/her parent institution. Apart from Institute assistantship, IIT Delhi has a number of assistantships sponsored by national as well as international institutions and/or industries. All students including faculty of engineering/science colleges meeting the academic qualifications for admission as full-time students with Institute assistantship are also entitled to apply for these. For more information on the availability of such scholarships in your area, please contact your respective department/centre. In exceptional cases with the approval of the Chairman, Senate, Sponsored (Fulltime) candidates employed in CSIR/DRDO/PSUs may also be offered assistantship provided they have qualified either GATE or any other national level examination like CSIR/UGC NET/ICAR etc. and fulfill the requirement for award of assistantship and their employer has no objection to the same. Institute provides a seed money of Rs. 20,000/- once during the program as partial financial assistance for presenting papers abroad in good academic conferences Institute is in the process of formalizing a number of agreements with leading foreign institutions or agencies for supporting upto 6 months long research visits by PhD students. This would enable interested students with the consent of their supervisor and DRC/CRC to undertake a research visit which would increase his/her exposure while adding value to his/her work. It is expected that all assistantship holders will have good general physique. He/She will have to produce on the date of Central Registration, a certificate to that effect in the prescribed format. A copy of the format would be given along with the admission offer letter. The admission is subject to his/her being found medically fit.

II M.TECH/MS (R) / M.DES STUDENTS AND M.TECH (HIGH VALUE ASSISTANTSHIP) A scheme for the award of Teaching/Research Assistantship for providing financial assistance to the students exists. The present scheme is described below: Students admitted to M.Tech/ M.S. (Research) and M.Des. Programmes on full-time basis are considered for the award of Half-time Research/Teaching Assistantship under which they will be paid Rs.8,000/- per month and would be required to provide assistance of 8 hours/week to the Department/Centre The maximum duration for which Assistantship can be awarded to M.Tech/ MS(R )/ M.Des students is 4 semesters. Students admitted to M . Tech (High Value Assistantship) Programmes basis are considered for the award of High Value Assistantship under which they will be paid Rs.15,000/- per month and would be required to provide assistance of 20 hours/week to the Department/Centre The maximum duration for which Assistantship can be awarded to M Tech.(High Value Assistantship) students is 6 semesters Only full-time assistantship. non-sponsored students who have qualified GATE/CEED are eligible for

In the first instance, the assistantship is awarded only for one semester. Thereafter continuation of the assistantship during each semester is contingent upon satisfactory academic performance and satisfactory performance in the discharge of responsibilities assigned under the assistantship scheme. For this purpose an SGPA of not less than 7.00 (6.75 in the case of SC/ST/PH) at the end of the semester is treated as satisfactory academic performance. 11

All fulltime M.Tech./MS(R)/M.Des students participating in a sponsored project/ consultancy project (in addition to their assistantship work) can be paid an honorarium of upto Rs. 3,000/- p.m. by the PI/CI of the project. All such work can be undertaken only with the consent of their supervisor(s). Candidates qualified for CSIR JRF will not be allowed to avail fellowship for doing M.Tech/M.S.(R) programmes. However, they can avail the CSIR fellowship for doing the Ph.D programme. Apart from the above mentioned scheme for teaching/research assistantships, there are a number of fellowships/scholarships instituted by Industries/Individuals. (For more information on these scholarships/ assistantships/fellowships please contact the respective department). A number of DAAD scholarships under the Sandwich System may be available. Indian Students pursuing M.Tech./M.S. (R) at IIT Delhi are eligible for this scholarship for doing their thesis work for about 6 months at one of the nine German technical Universities Institute is pursuing a number of other collaborative agreements with leading research laboratories an universities to enable such research visits by post-graduate students It is expected that all assistantship holders will have good general physique. He/She will have to produce on the date of Central Registration, a certificate to that effect in the prescribed format. A copy of the format would be given along with the admission offer letter. The admission is subject to his/her being found medically fit.

9. GENERAL GUIDELINES
(a) The minimum eligibility criteria indicated above for each programme is only an enabling clause. The Deptt./Centre may fix higher criteria at the time of short listing keeping in view the number of candidates, minimum background expected to cope with the programme etc. (b) The minimum prescribed 60% marks in aggregate (of all the years/semesters of the qualifying examination) is calculated by IIT Delhi as per example given below: Years 1st year IInd Year IIIrd Year IVth Year 1st Semester (%) 250/400 62.50 205/400 51.25 210/400 52.50 240/400 60.00 Total 905/1600 IInd Semester (%) 290/400 72.50 280/400 70.00 350/400 87.50 150/200 75.00 1070/1400

Aggregate (% age.) 1975/3000=65.83% (of all the years/semesters) (c) Admission on part-time basis is further subject to the availability of seats for part-time and decision of the respective DRC/CRC/PEC. (d) Candidates who are in the final year of their qualifying examination can be considered for admission only if they complete the requirement of their final examination including Viva-Voce by 21 July, 2014. Candidates must inform P.G. Section, IIT Delhi in writing by 21 July, 2014, if the requirements of their qualifying degree including Viva-Voce, if any, are not met by 21 July, 2014. Failure to inform the P.G. Section about non-completion shall result in forfeiture of entire fees deposited by them in addition to cancellation of their admissions. (e) The applications will be scrutinized by the Department/Centre concerned. The Department/Centre will call an adequate number of eligible candidates for a written test/interview which may be held between May 14 to June 15, 2014. The exact date for the test/interview will be communicated by the Department/Centre. For any query regarding date of interview, selection result and operation of waiting list please contact the concerned Deptt./Centre at the Telephone Nos. given on page 18 of this brochure. (f) Application incomplete, in any respect, is liable to be rejected. 12

(g) The Ph. D. candidates called for appearing in test and/or interview will be paid to and fro II Class Railway Fare by shortest route. However, this provision will not apply to the sponsored and parttime candidates. (h) No TA/DA will be paid to the candidates applying for M.Tech./MS(R)/M.Des. Programmes. (i) A provisional list of applicants selected for admission and of applicants selected for the award of Assistantship alongwith those placed on waiting will be displayed on the Department/Centre notice board within a day of the test/interview. The selected candidates would be required to pay the first installment of fees soon after the admission offer letter is issued to the candidates failing which seats will be offered to those on the waiting list.

10. APPLICATION PROCEDURE

Submission of Application is only through online procedure. Candidates are NOT required to send hard copy of the application form and bank challan. Online submission of application form may be made by accessing the Institute website <http://www.iitd.ac.in>. Candidates belonging to General/OBC category are required to pay for each application form a fee of Rs. 200/- and the candidates belonging to SC/ST/PH categories are required to pay Rs. 50/-. The bank charges will be borne by the candidate. For payment of application fee the candidate will use "State Bank Collect" utility of State Bank of India. (https://www.onlinesbi.com/prelogin/institutiontypedisplay.htm)

11. REFUND OF FEES

The whole amount of fees/other charges deposited by the students will be refundable after deduction of Rs.1,000/- if the candidates do not join the programme after paying the dues and leave the Institute by applying for refund on or before the date of registration For refund of fees and/or security deposit the student must apply on the prescribed form available from the P.G. Section, IIT Delhi or the Institute Website : http:// www.iitd.ac.in.

12. IMPORTANT INSTRUCTIONS FOR FILLING APPLICATION FORM

(a) Separate application form should be filled for Ph.D. programme for each Department/Centre. (b) Separate application form should be filled for each M.S.(R) programme. (c) Separate application form should be filled for M.Des. programme. (d) Separate application form should be filled for each interdisciplinary M.Tech programme. (e) The applicant seeking admission to M.Tech. programme of a particular department should fill a separate application form. He/she may give upto four choices in order of preference for the M.Tech. Programmes available in that department. However, he/she will be considered only for two choices for which he/she is eligible in the order of preference given. In case a candidate is found to have filled more than one form of a particular department, his/her candidature will be cancelled. (f) GATE score cut off criteria used for short-listing candidates in different non-sponsored (full-time) M.Tech. programmes during the Academic year 2013-2014 is given in Annexure IV. This is only for the candidates reference and the criteria may even change substantially based on applications received for the current admissions i.e. academic year 2014-2015. (g) Part-time/Sponsored (full-time) candidates must submit NOC/Sponsorship Certificate from their employer at the time of interview. (h) Filling of false information will lead to rejection of application/cancellation of admission. (i) Fill the programme code at the appropriate place in the Application Form. The Ph.D. programme codes are given in Annexure-I and M.Tech/M.S. (R)/M.Des. programme codes are given in Annexure-II. 13

13. CONTACT TELEPHONE/FAX NOS.

1. For any query/clarification please contact P.G. Section at the following fax/ telephone Nos.: Fax: 11-26582032 Tel: 11-26591723 2. For query regarding date of interview, selection result and operation of waiting list please contact the concerned Deptt./Centre at the following Telephone Nos. DEPARTMENTS Applied Mechanics Biochemical Engineering & Biotechnology Chemical Engineering Chemistry Civil Engineering Computer Science & Engineering Electrical Engineering Humanities & Social Sciences Management Studies Mathematics Mechanical Engineering Physics Textile Technology CENTRES Applied Research in Electronics Atmospheric Sciences Biomedical Engineering Energy Studies ITMMEC Instrument Design Development Polymer Science & Engineering Rural Development & Technology National Resource Centre for Value Education in Engineering SCHOOLS Bharti School of Telecommunication Technology & Management Amar Nath and Shashi Khosla School of Information Technology School of Biological Sciences INTERDISCIPLINARY R&D PROGRAMMES Opto-Electronics and Optical Communication Transportation Research and Injury Prevention Programme INTERDISCIPLINARY M.TECH. / M.DES. PROGRAMMES Computer Applications Industrial Tribology & Maintenance Engineering (ITMMEC) Instrument Technology Polymer Science & Technology VLSI Design, Tools & Technology Telecommunication Technology and Management Industrial Design (M.Des.) 26591291 26591280 26591437 26561494 26591085 26596200 26591431 26596121 26591147 26596200 26596056 26596104 26591101 26591301 26596132 26591251 26591281 26591431 26591421 26591121 26596585 TELEPHONE 26591201 26591001 26591021 26591501 26591241 26591291 26591071 26591371 26591171 26591471 26591051 26591331 26591401

14

ANNEXURE-I RESEARCH PROGRAMMES : DOCTOR OF PHILOSOPHY (PH.D.)

The Institute offers research programmes leading to the degree of Ph.D. in the following areas in the various Departments/Centres: Department of Applied Mechanics [Code AMZ] Large Deformations, Impact Mechanics, Elasticity, Piezothermoelasticity, Composite Materials and structures Plates and Shells, Non-linear Dynamics and Chaos, Railway Vehicle Dynamics, Off-Shore Structures, Smart Structures, Structural Stability, Snow Mechanics, Dynamic Plasticity, Nano Composites, Damage Mechanics, Experimental and Computational Methods in Solids and Fluids. Soft materials, structural Health Monitoring, Functionally Graded Structures, Active Vibration Control, Biomechanics/Cell Mechanics. Internal and External Flows, Pipeline Engineering, Solid-Liquid Flows, Computational Fluid Dynamics, Hydrodynamic Stability; Turbulence, Aerodynamics; Turbulent Heat Transfer Compressible Flows, Fluid-structure Interaction Computer Aided Design, Design Engg., Reliability Engineering, Availability and Maintainability Engg.; Engineering alternatives. Physical and Mechanical Metallurgy, Crystal, Plasticity, Phase Transformations, Fracture Mechanics, Fatigue, Environmental cracking, Failure Analysis, Mechanical Properties of Solids, Functionally Graded Materials, Residual Life Estimation, Nano Materials, Amorphous Materials, Metal Foams, Severe Plastic Deformation, Electron Microscopy. Department of Biochemical Engg. & Biotechnology [Code BEZ] Microbial and Enzyme Engineering: Analysis and design of microbial and enzyme reactors for production of industrially important products such as biofuels, industrial enzymes, biopolymers, organic solvents, biofertilizers and biopesticides etc.; development of bio-sensors for detection of various analytes; application of artificial neural networks for control of bio processes. Bioseparation and down stream processing: Membrane separation techniques, chromatographic separation techniques, water purification etc. Animal and plant cell culture: Development of cell culture techniques for cultivation of plant and animal cells in specialized reactors for production of therapeutic compounds. Environmental Biotechnology: The development of reactors and processes for stabilization of organic and industrial wastes. Biochemistry and molecular biology: Industrial enzymes, development of recombinant clones for overproduction of enzymes and metabolites; development of expression systems in bacteria and yeasts; bioenergetics and biological molecular machines; chaperone-mediated proteins folding of native and recombinant proteins; protein conformation study and structure-function relationship using biophysical methods; application of bio-informatic tools for development of bioprocesses.

Department of Chemical Engineering [Code CHZ] Mixing, Distillation and other separation processes, Particle Technology, catalysis and Reactor Engineering, Petroleum Refining Engineering, Membrane Synthesis & Processes, Waste Management, Environmental Engineering, Biomass, Fluidization, Computer Aided Design, Modeling Simulation and Optimization, Interfacial Engineering, Polymers, Computational fluid dynamics, control of Reactors, fuel cells, multiphase flow & rectors, Bioseparations and Bioprocessing complex fluids, Polymer Rheology, Process operations Planning and scheduling, Biosimilars, Quality by design, Protein Characterization, Colloid Science, Nano Technology, Biosensors, Renewable hydrogen and Fule Cells. 15

Department of Chemistry [Code CYZ] : Asymmetric synthesis & catalysis, Biochemistry (Enzyme technology, Microbial Biochemistry, Fermentation & Bio-remediation, Cloning & Proteomics), Bio-inorganic chemistry, Bio-organic chemistry, Bio-physical chemistry, Carbohydrate chemistry, Coordination chemistry, Fluorescence Spectroscopy (Ensemble & Single molecule), Nano-materials (Optical Properties & Photovoltaics), Nano-catalysis in ionic liquids, NMR spectroscopy, Organometallic chemistry, Peptide synthesis, Quantum & Classical computer simulation on chemical & biological systems, Solid state chemistry, Supramolecular chemistry (Molecular Organisation & Recognition), Synthetic & Mechanistic organic chemistry, Theoretical Chemistry. Department of Civil Engineering [Code CEZ] Environmental Engineering : Urban air quality management; indoor air pollution; water and waste water treatment; Emerging water contaminants (Nano particles, Antibiotics); urban water and waste water Management; Non-point source Pollution; Membrane Biological Treatment Process; Modeling, simulation and optimization of Environmental systems; Environmental Impact Assessment; Human Health Risk Assessment; solid waste management; incineration; circulating fluidized bed operations; Landfill Management; Carbon sequesteration; sustainable development (Urban cities/growth centres); Environmental Risk Analysis, GIS and Remote Sensing Applications for Environmental Management. Aerosol characterization, local air quality, climate change and health impact. Geotechnical Engineering : Soil mechanics; Rock mechanics; Rock engineering; Foundation engineering;slope stability and dams; ground improvement: Geosynthetics; reinforced soil; geoenvironmental engineering; Offshore geotechnology; Underground structures; constitutive modeling; ash ponds and ash utilization; landfills; expansive soils; Geophysical methods; Engineering geology; soil dynamics and earthquake geotechnics; Ground response, Site specific studies, Hazard analysis, Seismic microzonation; Geotechnology for tracks and pavements; computational methods. Risk and reliability in Geotechnical and Geoenvironmental Engineering; Blast and impact analysis; Energy g eotechnology; Non-linear soil-pile interaction; pile dynamics, Dynamic behavior of tunnels and slopes, Landslides and man movement in static and dynamic conditions. Structural Engineering : Analysis and design of structures; tall buildings; bridges; earthquake engineering; wind engineering; offshore structures; masonry, RCC and steel structures; construction Management; Construction Technology; concrete Technology; structural dynamics; structural control; constitutive modeling; computational methods; modeling of damage, plasticity and creep of concrete; durability of concrete; rebar corrosion; modeling of cements; supplementary cementitious materials; composites; high performance concrete; self compacting concrete; financial analysis; contract administration, quantitative methods in construction management; Infrastructure Project Management Risk and Financial Management; structural health monitoring; smart materials and structures; tensegrity structures; biomechanics; engineered bamboo structures; artificial intelligenc; damage assessment and strengthening; microstructural modeling; mechanics of composite materials; non-destrrctive testing and evaluation using ultrasound; subsurface imaging using ultrasonic wave propagation; piezoelectric energy harvesting Transportation Engineering : Transport planning; Transport policy; Transportation Safety; Construction work zone safety; Heterogeneous traffic flow modeling; Traffic safety and capacity of hill roads; Mass transportation planning; Fuzzy systems; Urban transport infrastructure planning and design; Expert systems in transportation engineering; Environmental impact assessment; Non-motorized transport planning; Modeling of pedestrian behavior; Geometric design of transportation infrastructure; Characterization of pavement materials; Pavement design (flexible and rigid); Damage modeling of bitumen and bituminous mixtures; Constitutive modeling of pavement materials; Recycling of civil infrastructure materials; Rheology of asphaltic materials; Condition assessment of highway infrastructure; Pavement management systems; Highway engineering; Airport infrastructure.

16

Water Resources Engineering : Hydrology in natural and urban environment; Hydrological modeling and simulation; Stochastic processes; Data mining in hydrology; Flood forecasting and modeling; Snow dynamics; Hydroclimatology; Climate change effects in water resources; Watershed modeling; Large river basin modeling; water resources systems, planning and management; Water allocation; Water resources conflicts; Irrigation management; Flow through porous media; Groundwater modeling; Ground water contamination; Contaminant transport modeling; Leachate pollution; Bioremediation; River water quality modeling; Environmental impact assessment of water resources projects; Surface and subsurface drainage; Hydraulic structures; Sediment transport; Application of numerical methods, CAD, CFD, AEM, GIS, and Remote sensing in Water Resources Engineering.

Department of Computer Science & Engineering [Code CSZ] Computer Architecture, VLSI Design Automation, Embedded Systems, Hardware-Software Co-design, System level Design and Design Space Exploration, ASIP Synthesis, Computer Vision, Computer Graphics, Virtual environments, Geometric modeling, Model representation, 3D Visualization and Animation, Image Processing, Artificial Intelligence, Natural Language Processing, Databases, Data Mining, Computer Networks, High-Speed Networks, Wireless and mesh networks, WiFi/WiMax, ad hoc and Sensor networks, Delay Tolerant Networks and Opportunistic communication, Multimedia systems, Peer-to-peer networking, Network measurement and modeling, Social networking, Protocol validation and verification, Analysis of algorithms, Randomized and Approximation algorithms, Graph algorithms, Computational Geometry, Combinatorial Optimization, Web-related computation, Parallel and Distributed Computing, Programming Language Semantics and Design, Semantics of Concurrency and Distributed Computation, Formal Methods and Verification, Compilers, Software Engineering, Serviceoriented computing, Foundations and Models of Computing, Computational and Systems Biology, Cryptography, Operating System.

DEPARTMENT OF ELECTRICAL ENGINEERING [Code EEZ] Electronic Engineering: Electronic Circuits, Microprocessor, Instrumentation, Microelectronics, VLSI, Digital Signal Processing, Computer Aided Circuit Design, Graph Theory, Biological and artificial, Neural Networks, Testing and Fault Diagnosis, Faulttolerant Design, Mixed-signal design. Power Engineering : Electrical Machines, Energy Conversion, Power Electronics, Power Quality, Drives, Powers System, Protection, Stability, Optimisation, Energy Conservation, HVDC & FACTS, Computer Applications in Power (computational intelligence, microcomputer/DSP control, CAD software & application) Renewable Energy Systems (Small Hydro, PV, Wind), Energy Audit & Efficiency. Communication Engineering : Signal Processing, Speech and Image Processing, Coding & Information Theory, Communication Systems, Optoelectronics, Optical Communications, Communication Networks, Wireless and Mobile Communications, Microwaves, Antennas. Computer Engineering : Computer Vision, Multimedia Systems, Image Processing, Computer Networks, Computer Architecture, Embedded Systems, Mobile computing, soft computing, Pattern Recognition, Artificial Intelligence, Information Technology, Music information retrieval, Bioinformatics. Control Engineering : Robust Control, Intelligent Control, Robotics, Optimal Control, System Identification, Neuro-Fuzzy Control, Reinforcement Learning Control, Nonlinear Systems and Control, Dynamical Systems, Applications to Biomolecular Circuits, Flight Control and Navigation, Adaptive Control, Cooperative Control and Path Planning, Sensor Fusion, Guidance, Navigation and Flight Control, Sliding Mode Control, Interval Analysis in Control Design, Computational Methods, for Simulation and Control, Modeling and Model Order Reduction, Attitude Control and Structural Control, Numerical Modeling and Simulation Embedded Control System.

Department of Humanities & Social Sciences [Code HUZ] Development Economics, Macroeconomics, Microeconomics, Endogenous growth, Labour economics, 17

Trade Policy, Discrimination, Health and Nutrition, Empirical Economics, Health Economics, Economics of Education, Demography & Population Economics, Issues of Labour, Industrial Development, Regional Development, Indian Economics Macro and International Development, Sociology of Culture and Knowledge, Sociology of Development, Environmental Sociology, Sociology of Social Movements, Sociol Anthropology of Medicine, Globalization and Transnationalism, Civil Society and Democratizations Sociology of Religion and Violence, Sociology of Agriculture Technology and Rural Development Policy, Sociology of Information and Communication Technologies (ICTs) for Development, Visual Anthropology/Sociology, Economic Sociology, Technology, Work and Society, Gender Studies, Cultural Studies, Performance Studies, New Media Studies, Science and Technology Policy, Energy and Environmental Policy, Law, Technology, Society, Socio-Legal Studies, Regulation of Technology, Environmental Law + Policy, Climate Policy, Disaster Management and Risk Reduction, Modernist and Postmodernist Literature, Indian English Theatre, Indian Writing in English, Contemporary Fiction, Postcolonial Literature, Philosophy of Literature, Phonology, Language Education, Language Variation, Linguistics (Formal Syntax and Semantics, Language Acquisition), Cognitive Studies, Philosophy of Language, Epistemology, Metaphysics, Ethics, Aesthetics, Continental philosophy, Phenomenology, Hermeneutics, Philosopy of Science, Philosophy and Film, Philosophy of Mind and Cognition, Wittgenstein, Metaphysics of the Self, Religion and Development, Buddhism (including Buddhism in the Himalayas and Political Buddhism), Philosophy of Culture and History, Social and Political Philosophy. Tibet and Peace Studies, Positive Psychology, Social Psychology. Note: (Shortlisted students will be required to submit a two pages research proposal).

Department of Management Studies [Code SMZ] Production Management and Operations research, Enterprise Resources Planning, Project Management, System Analysis, Management of Information Technology, Network Security Management, Management Information System & Decision Support System, Electronic Commerce; Human Resource Management, Organization Management / Behaviour / Development, Business Ethics, Leadership, Financial analysis, Financial Management, International Financial Management, Capital Markets, Derivative Securities, Portfolio Management, Mutual Funds, Behavioural Finance, Managerial Economics, International Economics, Productivity and Efficiency Analysis, Business Forecasting, Economic Feasibility & Technoeconomic Analysis, Marketing Management, Industrial and Hi-Tech Marketing: Public Sector Management, Entrepreneurial Management, Management of Technology, Corporate Strategy, Global Competitiveness, Strategic Innovation, Entrepreneurship, Total Quality Management, Flexible Systems Management, Business Process Re- engineering, Strategic Business Management, Knowledge Management. International Business, Intellectual Property Rights.

Department of Mathematics [Code MAZ] Pure Mathematics, Applied Mathematics, OR & Statistics and Theoretical Computer Science.

Department of Mechanical Engineering [Code MEZ] Design Engineering: Mechanical Vibrations, Rotor Dynamics, Damped Structures, Composite Structures, Smart structures, Active Vibration Control, Experimental Modal Analysis & Identification, Structural Dynamic Modification, Finite Element Model Updating, Dynamic Design, Noise Engineering, Condition Monitoring, Bearing Dynamics, Lubrication, Mechanical System Design, Computer Aided Mechanical Design, Computer Controlled Mechanisms, Vehicle Dynamics, Modelling the Impact of Vehicles, Impact Biomechanics, Concurrent Engineering Design, Mechanisms, Robotics, Multibody Dynamics, Application of Multibody Dynamics in Design and analysis of Rural Engineering Systems, Mechatronics, Sensors and Actuator Design, MEMS, Design of Microsystems, Nanomechanics, Artificial Intelligence Applications in Mechanical Engineering & Expert Systems for Design & manufacturing and Mechanical Engineering Applications to Medical Science. Thermal Engineering: Internal Combustions Engines, Phenomenological and Multi-dimensional modeling of engines, Combustion, Radiation from flames, Engine Simulation, Turbo charging, 18

Combustion Generated Pollution, Alternate Fuels, Utilization of biogas, Biomass gasification, Energy efficient kilns, Energy flow through radial rectilinear cascades, Centrifugal and axial compressors Internal flow and Laser anemometry, Optimization of power plants, Sustainable Energy Systems, Computer Simulation and Design of Thermal Systems, Refrigeration & Air Conditioning Systems, Thermal Comfort, Fire Research, Air Water Spray Injection, Waste Heat Utilization, Energy Conservation, Renewable Energy Sources, Heat Transfer, High temperature natural convection Microchannel Heat Exchangers, Particle-laden Flow, Fluid Mechanics & Machines, Turbulence, Computational Fluid Dynamics (CFD), Turbo machines, Numerical modeling of radiation heat transfer in participating media; Heat and mass transfer in porous Media; Solar cooling; Micro/ nano scale heat transfer; Theoretical/computational modeling of mass transfer, Charge transfer; fluid flow in microfluidic/nanofluidic devices. Production Engineering: Metal Cutting, Metal Forming, Welding, Metal Casting, Material Characterization, Nontraditional Manufacturing Processes, Measurements & Metrology, Grinding of Ceramics and Metal Matrix Composites, Processing of Polymers & Composites, Injection Molding, Microcellular Injection Molding, Finite Element Applications in Manufacturing, CAD/CAM, Rapid Prototyping, Intelligent Manufacturing, Micro & Nano-Manufacturing, Biomaterials and Medical Implants, Nanocomposites, Modeling of Material Behavior, Lean concepts in Machine Tool Design. Industrial Engineering: Quality, Reliability and Maintenance, Lean Manufacturing, Agile Manufacturing Productivity Management, Operations Research, Operations Management, Project Management, Supply Chain Management, Applied Probability Models, Decision Support Systems, Value Engineering, Flexible Systems, Healthcare Systems, Intelligent Manufacturing Systems, e-Business, Reverse Logistics, Financial Engineering, Wireless Systems.

Department of Physics [Code PHZ] Materials and Condensed Matter Physics: Thin Films, Materials and Devices, Novel Functional Materials, Nanomaterials; Carbon nanotubes, Field emission, Nanocomposites; Lattice Dynamics, Semiconductors and Amorphous Materials, Electronic Ceramics, Microwave Materials, Microwave Processing, Quantum Functional Materials, Nanomagnetism and Spintronics, Superconductivity, Photovoltaics; Graphene, Topological Insulators Optics and Photonics: Holography, High density Data storage, Liquid Crystals, Nonlinear Phase Conjugation, Optical Information Processing, Optical Data Security, Nonlinear Optics, Nonlinear guided Wave Optics, Solitons, Quantum Optics, Quantum photonics, Fiber Optics, Integrated Optics, Fiber Optic Sensors and Biosensors, Fibre Optic Components, Nanophotonics, Laser Spectroscopy and Applications, Terahertz Spectroscopy and Applications, Ultrafast Dynamics, Laser Processing and Fabrication, Green and Biophotonics, Photonic Metamaterials, Bio-Medical Imaging, Inverse Problems in Imaging, Optoelectronics Plasma Physics: Particle acceleration, Nonlinear Waves and Instabilities in Plasmas, Thermo Nuclear Fusion, Microwaves and Plasma Interaction, Solitons in Plasma, Space Plasmas, Terahertz (THz) Radiation Generation, Hall Thrusters, Interaction of Plasmas with Materials Theoretical Physics: Mathematical Physics, Statistical Mechanics and Computational Physics, Theoretical studies in ultra-cold atoms, Nuclear and Particle Physics, Ultrafast Optics Interdisciplinary: Optical Spectroscopy under extreme conditions, High Pressure-High Temperature Physics, Energy Storage and alternative Energy Materials, CO2 sequestration, Mineral Physics

Department of Textile Technology [Code TTZ] 19

Textile Engineering: Design and analysis of yarn and fabric formation systems: rotor spinning, ring spinning and air jet spinning, friction spinning, weaving, knitting, nonwovens, braiding etc. ; structural mechanics of textiles; high stress elastic materials; apparels and garments; comfort, handle and other functional aspects of fibrous assemblies; design and development of technical textiles: geotextiles, filter fabrics, medical textiles, protective textiles, textile composites etc; systems analysis; textile production and marketing; operation management and supply chain management; textile instrumentation and machine development; modeling and simulation of textile processes and products;quality management. Textile Chemical Technology : Textile chemical processing: preparatory processes, dyeing, printing and finishing; surface functionalization by plasma and UV excimer lamp; micro and nano encapsulation; conducting textiles; natural dyes; bio active textiles; textile ecology and environment. Fibre Science & Technology: Synthesis and characterization of advanced polymeric materials, Fibre formation processes,modeling and simulation structure property correlation; functional and responsive polymers, smart textiles; modification of natural and synthetic fibres; nanofibers by electrostatic spinning, nanomaterials: synthesis and application in textiles; coated textiles; nanocomposites, green composites; medical textiles, tissue engineering, sustainability and polymer recycling.

Centre for Applied Research in Electronics [Code CRZ] Signal Processing; Underwater Acoustics, Speech and Audio, General Acoustics, Acoustic Imaging. Digital Communications, DSP Algorithms; Microwaves and RF: Active and Reconfigurable Circuits and Antennas, Millimeter Wave circuits and sub-systems, RF MEMS, Wideband Microwave Circuits, CMOS-RFIC Modeling of Active Devices; Microelectronics: Micro-Electro-Mechanical Systems (MEMS) Technology, Thermal, Acoustic and Optical Non-Destructive Characterization.

Centre for Atmospheric Sciences [Code ASZ] Meteorology, Oceanography, Air Pollution and Climate change.

Centre for Biomedical Engineering [Code BMZ] Electrical Engineering: Instrumentation: Biomedical Engineering: Physics: Mechanical Engineering/ Manufacturing/ Production Engineering: Bio-chemistry: Biotechnology: Chemistry, Food Science & Technology: Polymer Chemistry: Pharmaceutical Sciences: Applied Mathematics. Centre for Energy Studies [Code ESZ] Energy Efficiency, Fuel Technology, IC Engines and Biofuels, Electrical Energy Systems, Heat & Mass Transfer, Renewable Energy Systems, Environmental Pollution and Control, Energy Economics & Planning, Plasma Science & Technology, Industrial Application of Plasmas, Energy Conservation and management. Centre for Polymer Science & Engineering [Code PTZ] Synthesis of speciality polymers; Structure-property correlation in polymeric materials; Rheology and processing polymers, polymer blend and alloys; Fibre/particulate filled thermoplastic/thermoset composites: Degradation and stabilization of polymers; Mechanical and thermal properties of polymeric systems, crystallization of polymers in blends/composites, Reactive Processing; Modification of polymers, photodegradable polymers. Morphological Studies of polymers; polymer nanocomposites. Smart polymers, Micro and nano hydrogels; high performance polymeric materials for fuel cells; Modelling and simulation in polymers processing; Computer analysis of mould filling; Design and stress analysis of engineering component form polymeric materials. Polymer electronics, Synthesis of conjugated organic materials, Olefin polymerization catalysts.

20

Centre for Rural Development and Technology [Code RDZ] Artisanal technologies and rural industries; Bamboo technologies; Biogas production and enrichment, animal energy; Dairy and Food Processing; Biofuels, Biofertilizers and Biopesticides; Biomass production, conversion and utilization systems; Environmental microbiology and bioremediation; Natural products including aromatics, medicinal plants, nutraceuticals; Pesticide residue and food safety; Ecofriendly Grain Storage System; Renewable energy technologies; Rural energy systems; Biomass Combustion, Clean Cookstoves; Solid Waste Management, Treatment of Industrial/domestic waste; Wasteland reclamation; Tissue Culture; Mushroom Technology; Ethnoveterinary Medicine; Ecological Sanitation.

Industrial Tribology, Machine Dynamics & Maintenance Engineering Centre [Code ITZ] Tribology: Tribology of Polymers & composites, nano-composites, ceramics and metals. Wear Mechanisms and modeling of metallic and non-metallic materials and surface engineering. Boundary and Hydrodynamic lubrication, E-HD lubrication, lubricant characterization and analysis, tribology of bearings and other machine elements. Pneumatic, conveying of bulk solids, operational problems like erosion and degradation. Maintenance Engineering and Machine Dynamics: Condition based maintenance, signature analysis, vibration, acoustic emission, temperature and wear debris monitoring techniques, maintenance planning and control, computer aided maintenance audit, reliability, availability and maintainability (RAM) engineering, vibration & noise analysis and control, risk analysis and safety, non-destructive testing, residual life estimation, failure analysis, performance and dynamic study of machine elements and equipment like pumps, compressors, turbines, design for maintenance, etc. Instrument Design & Development Centre [Code IDZ] CAD and Simulation of Electronic Systems, Microprocessor Applications, Power Electronics and Control, Electric Drives, Electromagnetic Sensors and Instrumentation, Smart Sensors and Sensors Networks, Digital System Design and DSP Applications, Digital Holography, Digital Speckle Pattern Interferometry, Flame Tomography, Optical Coherence Tomography, Fiber-Optic Sensors, Optical Metrology, Diffractive, Aspheric and Freeform Optics. Computer Aided Product Design, Ergonomics, Graphic Design, Human Computer Interface, Design and Culture, Design for User Experience, Customer Persuasion and e-comerce, Soft Computing, Design for sustainability.

Amar Nath and Shashi Khosla School of Information Technology [Code ANZ] Dependable Computing, Information Security, Information Storage and Retrieval, High Speed Networks, Multimedia Systems, Embedded Systems and Sensor Networks, Internet of Things, HCI (Human Computer Interfaces), Robotics and Intelligent Systems, Assistive Technologies for Special Needs, Medical Computing, Computational Biology, ICT for Development, Geographical Information Systems

Bharti School of Telecommunication Technology and Management [Code BSZ] Telecom Networks, Telecom Software, Wireless Technologies, Optical Networks, Signal Processing, Telecom Systems Design, Planning and Management, Regulatory and Policy Aspects of Telecom Services and Systems, Embedded Telecom Systems, Telecom Network Management, Performance Analysis of Communication System and Resource Management.

School of Biological Sciences [Code BLZ] Computational Biology, Systems Biology, Chemical Biology, Cellular Biophysics, protein folding & misfolding with focus on infectious diseases and non-communicable disorders, Chaperonc assisted protein folding, Molecular biophysics of protein folding, unfolding and conformalional properties, Cognitive and computational neuroscience, Viral diseases, Nanoparticle-based targeting, Structural Biology, Diagnostic Virology, Cancer Biology, Plant-based therapeutics, Marine Bioprospecting, insulin 21

signaling and insulin resistant diabetes, Leishmaniasis Transportation Research & Injury Prevention Programme [Code TRZ] Transportation Planning; Traffic Flow Modelling and Optimization; Public Transport Systems; Substainable Urban Transport; Highway Safety; Vehicle Crash Modeling; Road Traffic Injury Prevention. Pedestrain and Non-Motorised Vehicle Safety, Urban Freight. National Resource Centre for Value Education in Engineering [NRZ] Philosophy of Values; Professional Ethics; Interaction of Science, Technology and Human Values.

22

ANNEXURE -II M.Tech./M.S.(Research) and M.Des. Programmes offered Department/Centre/ Interdisciplinary Programme Programme Programme Code AME AMD CRF AST CYM CHE CET CEV CEG CEU CES CEP CEW MCS* EEE EET EEA EEN EEP EES MEM MEE MEP MET PHA PHM TTF TTE JCA JES JID JIT JOP JPT JTM JVL** JEN

A. M.Tech Programmes of Deptts./Centre Applied Mechanics Engineering Mechanics Design Engineering Applied Research in Electronics Radio Frequency Design and Technology Atmospheric Science Atmospheric-Oceanic Science & Technology Chemistry Molecular Engineering; Chemical Synthesis and Analysis Chemical Engineering Chemical Engineering Civil Engineering Construction Engg. & Management Environmental Engineering and Management Geotechnical and Geoenvironmental Engg Rock Engineering and Underground Structures Structural Engineering Transportation Engineering Water Resources Engineering *Computer Science & Engineering Computer Science & Engineering Electrical Engineering Communications Engineering Computer Technology Control & Automation Integrated Electronics & Circuits Power Electronics, Electrical Machines & Drives Power Systems Mechanical Engineering Mechanical Design Industrial Engineering Production Engineering Thermal Engineering Physics Applied Optics Solid State Materials Textile Technology Fibre Science & Technology Textile Engineering B. Interdisciplinary M.Tech. Programmes Computer Applications M.Tech. Programmes Energy Studies Instrument Technology Industrial Tribology & Maintenance Engineering Opto-Electronics & Optical Communication Polymer Science & Technology Telecom Technology & Management VLSI Design Tools & Technology Special part-time M. Tech Energy & Environmental Management (Evening) Programme

23

Department/Centre/ Interdisciplinary Programme C. M.S. (Research)

Programme

Programme Code AMY SIY BSY BEY CHY CEY CSY* EEY MEY JDS

Applied Mechanics Amar Nath and Shashi Khosla School of Information Technology Bharti School of Telecommunication Technology and Management Biochemical Engg. & Biotechnology Chemical Engineering Civil Engineering Computer Science & Engineering Electrical Engineering Mechanical Engineering D. M.Des. Programme Industrial Design

* Admission to M.Tech. programme in Computer Science & Engineering (MCS) is limited to candidates who have a Qualifying degree in Computer Science, Electrical Engineering, Information Technology, Electronics and Communication, M.Sc Mathematics (with exposure to appropriate level course in Computer Technology) and MCA (with Math and Science at B.Sc level). * Admission to M.S. (Research) Programme in Computer Science & Engineering Department (CSY) is limited to candidates who have a Qualifying degree in Computer Science, Electrical Engineering, Information Technology, M.Sc Operations Research, Electronics and Communication, M.Sc Statistics, MA/M.Sc Math, M.Sc Math (with exposure to appropriate level course in Computer Technology) and MCA (with Math and Science at B.Sc level). In addition to the above, both the programmes (MCS and CSY) are limited to candidates who have appeared in GATE with Computer Science and Engineering or Information Technology. ** M.Tech. Programme in VLSI Design Tools and Technology is an interdisciplinary programme jointly offered by Electrical Engg. Deptt., Computer Science and Engineering Department & Centre for Applied Research in Electronics. The M.Tech. programme is wholly sponsored by industries such as Philips Semiconductors, Analog Devices, Temic Usha Ltd. Texas Instruments, SGS Thomson. The Students will get a monthly fellowship as per rules. Candidate applying for admission to this programme should have basic degree in Computer Science (B.Tech. or equivalent) or Electrical Engineering (B.Tech or equivalent) or Physics with electronics specialization (M.Sc. or equivalent) plus GATE.

24

ANNEXURE-III Options for M.Tech., M.S.(Research) & M.Des. Programmes according to the discipline in which the candidate holds the Qualifying Degree Discipline Architecture Aeronautical Engineering Agricultural Engineering Automobile Engineering Biochemical Engineering/ Biotechnology Chemical Engineering Civil Engineering Computer Science/Computer Science & Engineering Electrical Engineering Programme Options (see Annexure-II for codes) CET, CEP, MCS, JEN, JDS, MET,SIY AMD, AME, AMY, EEA, MCS, MEM, MEE, MEP, MET, JCA, JIT, JDS CEW, MCS, MEM, MEE, MEP, JDS, AST SIY, AMD, AME, MCS, MEM, MEE, MEP, MET, JIT, JDS, JES, JEN,EEA SIY, BEY, CEV, MCS, MEE, TTF, JDS, JEN,EEA AMD, AME, AMY, CEV, BEY, CHE, CHY, EEA, MCS, MEE, MET, TTF, JES, JEN, JCA, JPT, AST, JDS, SIY SIY, AMD, AME, AMY, CEG, CEP, CES, CET, CEU, CEV, CEW, CEY, MCS, MEE, JCA, JES, JEN, AST, JDS SIY, BSY, CSY, EEE, EET, EEA, EEN, EEP, EEY, EES, MCS, JOP, JCA, JVL, JTM, EEY, JDS, MEE, JEN SIY, BSY, CRF, CSY, EEE, EET, EEA, EEN, EEP, EES, EEY, MCS, MEE, PHA, PHM, JOP, JES, JEN, JCA, JID, JVL, JTM, JDS, TTE EEE,EET,EEA,EEN,EEP,EES,SIY AST, CEV, JEN, MET CSY, MCS, PHA, PHM, JOP, EEA, MEE, EEE, EEN, EEP, EET, EEY, JTM, CRF, BSY,SIY PHA, PHM, JOP, JVL, JES, JID, JEN, SIY, JPT, MCS, JCA, CRF, EEN, EEY, TTF,SIY JES, JEN,MCS,SIY BEY, MCS, MEE, MET, JDS BEY SIY SIY, MCS, MEE, MEP, MEY, JIT, JCA, JPT, JDS, AMD SIY, CSY, MCS, EET, EEN, EEY, BSY, JVL, MEE SIY, MEM, MEE, EEA, EEP, EEN, EET, EEY, JVL, MCS, JDS, JID, JTM,JES,JEN, BSY, MED JES, JEN SIY, AMD, AME, AMY, CEP, EEA, MCS, MEM, MEE, MEP, MET, MEY, JIT, JCA, JPT, JDS, JID, JES, JEN, AST, TTE AMD, AME, AMY, MCS, MEP, MEM, MEE, MET, JCA, JDS, MET

Energy Engineering Environmental Engineering Electronics & Communication Engineering Physics Energy Engineering /Energy system / Associated Disciplines Food Engineering Technology Industrial Biotechnology Industrial Design Industrial Engineering Informational Technology Instrumentation Engineering Instrumentation Engineering & Electronics Mechanical Engineering

Metallurgy

25

Mining Engineering M.Sc. Operations Research M.Sc. Meteorology M.Sc. Physics M.Sc. Geo-Physics Manufacturing Science & Engg Marine Engineering M.Sc. Statistics M.Sc. Chemistry M.A./M.Sc. Maths M.Sc. Mathematics/with an exposure to appropriate level course-in Computer Technology MCA (With Maths and Science at B.Sc. level M.Sc. Physics with specialization in Electronics Naval Architecture

CEU, MCS, JIT, MEE, MEM CSY, SIY, JCA, MEE SIY, JCA, AST EEN,MCS, PHA, PHM, TTF, JCA, JID, JES, JEN, JPT, JOP, JVL, AST MCS, JCA, AST AMD, AME, AMY, SIY, MEY, JIT, JPT, JDS, MEP, MEE, TTE JIT, AST, MEM, MET, AME, AMD, AMY CSY, SIY, JCA, AST, MEE MCS, TTF, JES, JEN, JPT, AST,SIY CSY, SIY, MCS, JCA, AST, MEE CSY, EET, MEE,SIY

SIY, MCS, JCA, AST, MEE

SIY, EEN, EET, EEY, MCS PHA, PHM, JOP, JVL, AST, BSY, JTM, JES, JEN AMD, AME, AMY, MCS, JDS, MEM

Polymer and Rubber Technology Production Engineering

MCS, TTF, JPT, MEP

SIY, AMD, AME, AMY, MCS, MEM, MEE, MEP, MET, MEY, JCA, JIT, TTE Power Engineering/ Power Plant JES,JEN Engineering/ Heat and Power Engineering Textile Chemistry Textile Engg./Technology MCS, TTF, JPT MCS, MEM, MEE, MEP, TTF, TTE, JCA, OPT, JDS,SIY

26

ANNEXUREIV
S.NO.

GATESorecutoffforadmissiontononsponsoredfulltime M.Tech.ProgrammesinAcademicYear20132014

(Thisisonlyforreferenceasthecutoffthisyearmaychangeevensubstantially)
Code GATE Paper/ B.Tech. Discipline GEN OBC SC ST PH

M.Tech. Programme

1. 2. 3. 4. 5.

Engineering Mechanics Design Engineering Radio Frequency Design & Technology Atmospheric-Oceanic Science Technology Molecular Engg; Chemical Synthesis and Analysis Chemical Engineering

AME AMD CRF AST CYM CY

600 600

540 540

360 360

360 360

360 360

300 330

300 300

200 200

200 200

200 200

6.

CHE

7.

Construction Engg. & Mgmt. Environmental Engg. & Mgmt.

CET

Direct Admission Interview Shortlisting CE AR CE BT CH EN CE MN CE

525 450 598 531 531 486 405 411 448 300 639

500 400 531 416 460 478 309 396 471 300 575

450 300 415 238 347 300 325 272 281 263 527

400 285 493 295 352 349 200 291 326 269 516

450 300 200 200 200 200 200 200 200 200 200

8.

CEV

9. 10.

11. 12. 13.

Rock Engg. & Underground Structure Geotechnical and Geoenvironmental Engg. Structural Engineering Water Resources Engg. Transportation Engg.

CEU CEG

CES CEW CEP

14.

Computer Sc. & Engg.

MCS

15. 16. 17. 18. 19.

Communications Engg. Computer Technology Control & Automation Integrated Electronics & Circuits Power Electronics, Electrical Machines & Drives Power Systems

EEE EET EEA EEN EEP

CE CE AG CE AR ME Direct Admission Interview Shortlisting EE/EC/IN IT/CS/EC/ Other

661 460 438 598 304 595 805 740 735 720 705 780

635 407 307 553 300 524 805 670 680 640 640 715 685

478 269 381 411 200 327 805 500 600 520 520 570 560

441 315 386 411 200 422 805 500 450 450 400 500 495

200 200 200 200 200 200 805 500 500 510 430 500 520

EE

740

20.

EES

Others EE

850 700

850 640

850 500

850 450

850 440

21. 22. 23. 24. 25. 26. 27. 28. 29. 30.

Mechanical Design Industrial Engineering Production Engineering Thermal Engineering Applied Optics Solid State Materials Textile Engineering Fibre Science & Tech. Radio Frequency Design & Technology Computer Applications

MEM MEE MEP MET PHA PHM TTE TTF CRF JCA

Others ME ME ME ME PH EE/EC PH EE/EC BE/B.Tech M.Sc. BE/B.Tech M.Sc.

850 675 575 550 675 330 650 330 650 400 550 400 550 675 440 740 690 600 335 630 650 580 550 650 650 330 350

850 640 475 500 640 300 585 300 585 360 495 360 495 605 400 690 660 550 300 567 580 522 495 550 600 300 315

850 500 400 400 500 220 400 220 400 266 366 266 366 450 300 500 500 400 300 375 315 300 400 400 460 220 235

850 400 350 350 400 220 400 220 400 266 366 266 366 400 300 500 500 400 300 375 315 300 350 300 350 220 235

850 400 375 350 400 220 400 220 400 266 366 266 366 450 300 375 315 300 350 300 500 220 235

31.

Energy Studies

JES

MA CS/IT ECE Others Phy. Mech. Ele/EC Others

32. 33. 34.

Industrial Tribology & Maintenance Engg. Instrument Technology Optoelectronics & Optical ommunication Polymer Science & Tech.

JIT JID JOP

35.

JPT

36. 37.

Telecom. Tech & Mgmt. Industrial Design (M.Des.)

JTM JDS*

Bkgrnd EE/EC Bkgrnd PH Bkgrnd CY,TF, Polymer Bkgrnd CH,Petro Bkgrnd ME (All) Arch. BE/B.Tech/B FT EC/EE/IN CS

400 590 700 55 55 730 710

360 530 650 50 50 730 710

266 390 500 45 45 730 710

266 390 300 30 30 730 710

266 390 300 N.A. N.A. 730 710

38.

VLSI Tool Design & Technology

JVL

*CEEDPercentile

Some Important Information for Candidates Ragging in any form is banned in IIT Delhi. The Institute treats ragging as a cognisable offence and stern action will be taken against the offenders.

NOTE : IIT Delhi will not be responsible for any postal delays. All matters of disputes will be subject to legal jurisdictions of the courts at Delhi only. The institute reserves the right to amend, without any notice, any provisions stated in this brochure.

30