Alloy Chain Sling Working Load Limits

SECTION 3 - Chain
44
Alloy Chain Sling Working Load Limits

Peerless ACCO Grade 80 Alloy Chain Sling Working Load Limits
Chain Size
Single Chain at
Double (D) Chain Slings /Lbs.
Triple (T) & Quadruple (Q) Chain Slings /Lbs.
90o
Inches
mm
9/32
3,500
6,100
4,900
3,500
9,100
7,400
5,200
3/8
10
7,100
12,300
10,000
7,100
18,400
15,100
10,600
1/2
13
12,000
20,800
17,000
12,000
31,200
25,500
18,000
5/8
16
18,100
31,300
25,600
18,100
47,000
38,400
27,100
3/4
20
28,300
49,000
40,000
28,300
73,500
60,000
42,400
7/8
22
34,200
59,200
48,400
34,200
88,900
72,500
51,300
26
47,700
82,600
67,400
47,700
123,900
101,200
71,500
1-1/4
32
72,300
125,200
102,200
72,300
187,800
153,400
108,400
Lbs.
NOTE: Working Load Limit should not be exceeded
Peerless ACCO Grade 100 Alloy Chain Sling Working Load Limits
Chain Size
Inches
Single Chain at
90
mm
Double (D) Chain Slings /Lbs.
Triple (T) & Quadruple (Q) Chain Slings /Lbs.
Lbs.
9/32
4,300
7,400
6,100
4,300
11,200
9,100
6,400
3/8
10
8,800
15,200
12,400
8,800
22,900
18,700
13,200
1/2
13
15,000
26,000
21,200
15,000
39,000
31,800
22,500
5/8
16
22,600
39,100
32,000
22,600
58,700
47,900
33,900
NOTE: Working Load Limit should not be exceeded
CAUTION: Do not use Grade 80 Fittings with Grade 100 Chain.

.
Peerless ACCO Grade 80 & Grade 100 Alloy Chain - NACM Specifications
Size
Working Load Limit **
Nominal Material Dia.
Nominal Inside Length
Nominal Inside Width
Maximum Weight
Grade 80
P8A (mm)
& PA8
(in.)*
Grade 100
PA10 (in.)
Grade 80
P8A & PA8
(lbs.)
7mm
9/32
3,500
4,300
0.274
0.279
0.827
0.870
0.405
71.2
77.0
8mm
5/16
4,500
5,700
0.311
0.342
0.945
1.010
0.480
91.4
112.0
10mm
3/8
7,100
8,800
0.392
0.404
1.182
1.226
0.560
147.4
152.0
13mm
1/2
12,000
15,000
0.510
0.529
1.535
1.570
0.750
247.8
278.7
16mm
5/8
18,100
22,600
0.630
0.625
1.890
1.930
0.865
362.3
374.0
20mm
3/4
28,300
35,300
0.781
0.821
2.420
2.417
574.5
629.3
Grade 100
Grade 80 Grade 100
PA10
P8A & PA8
PA10
(lbs.)
(in)*
(in)
Grade 80
P8A &
PA8 (in)*
Grade 100 Grade 80 P8A

PA10 (in) & PA8 (in)*
1.140
Grade 100
PA10 (in)
1.124
Grade 80
P8A & PA8
(lbs/100 ft)*
Grade 100
PA10
(lbs/100 ft)
7/8
34,200
0.906
2.660
1.260
766.6
47,700
1.032
2.900
1.420
1,010.0
1-1/4
72,300
1.25
3.500
1.750
1,550.0
* Grade 80 Alloy Chain sizes up to and including 20mm are stamped P8A and sizes 7/8 and above are stamped PA8.
** CAUTION: Do not exceed Working Load Limits (WLL).
Peerless Chain does not accept liability for damages which may result from chain used in excess of working load limits.
To determine which chain size and leg style are best suited
to your requirements - use the working load limit table as a
guide. The table gives the working load limits of 9/32
through 1-1/4 in 1, 2, 3, and 4 leg styles.
Determine the maximum load you will lift and the angle of
the lift involved. Always select a chain assembly that has a
higher working load limit and a lift angle greater than or

equal to the desired load and angle.
Working Load Limits of the chain and components are
established as pounds applied at the indicated degrees from
horizontal.
FOR MORE INFORMATION CONTACT OUR NEAREST BRANCH OFFICE
45
SECTION 3 - Chain
Welded Single Chain Slings

Peerless Welded Single Chain Sling Specifications
SOO
SOS
SOG
SOF
SG
Single Chain at
Chain Size
90o Lbs.
Plain End
Grade 100
A
B
C
Dia.
Ins.
Ins.
Mtl. In. Width In Length In.
Inches
mm
Grade 80
9/32
3,500
4,300
5/8
3/8
10
7,100
8,800
3/4
1/2
13
12,000
15,000
3-1/2
5/8
16
18,100
22,600
3-1/2
3/4
20
28,300
1-1/4
7/8
22
34,200
1-1/2
12
26
47,700
1-3/4
12
1-1/4
32
72,300
14
Mechanical Single Chain Sling

SOO
SOS or SOSH
SOG
SOF
SG Plain End
Note: Assemble using only

Kuplex II or other approved
alloy Mechanical Connectors
Mechanical Chain Sling Specifications

Single Chain at 90o
(lbs.)
Chain Size
Inches
mm
Grade 80
SOO/CO
SOS/SOSH Sling Hooks
SOG Grab Hook
SOF Foundry Hook
Kuplink
Grade 100
Cut Chain
for 5 Reach
No.
Cut Chain
for 5 Reach
No.
Cut Chain
for 5 Reach
No.
Cut Chain
for 5 Reach
9/32
3,500
4,300
K-11
3-9
K-80
4-1
K-72
4-2
K-498
4-0
3/8
10
7,100
8,800
K-12
3-8
K-81
3-11
K-73
4-1
K-499
3-11
1/2
13
12,000
15,000
K-13
3-10
K-82
3-10
K-75
4-0
K-500
3-10
5/8
16
18,100
22,600
K-14
3-1
K-83
3-5
K-76
3-9
K-501
3-4
3/4
20
28,300
K-15
3-1
K-84
3-5
K-77
3-5
K-502
3-0
7/8
22
34,200
2-0
K-85
2-8
K-78
3-2
K-503
2-8
26
47,700
2-2
K-86 *
2-5
* K-86 1 Kuplex Sling Hook available only in Grade 63 - Working Load Limit is 35,900 lbs.
Welded Double Chain Sling

Peerless Welded Double Chain Slings Specifications
Chain Size
Inches
mm
Double Chain
Oblong Link
Lbs at 60o
Grade 80
Grade 100
A
Dia. Mtl.
In.
B
Ins. Width
In
C
Ins. Length In.
9/32
6,100
7,400
5/8
3/8
10
12,300
15,200
3/4
1/2
13
20,800
26,000
3-1/2
5/8
16
31,300
39,100
1-1/4
3/4
20
49,000
1-1/2
12
12
7/8
22
59,200
1-3/4
26
82,600
14
32
125,200
2-1/4
16
1-1/4
DOS
DOG
DOF
SECTION 3 - Chain
46
Mechanical Double Chain Sling
DOS or DOSH
DOG
DOF
Note:
Assemble using only Kuplex II or other
approved alloy Mechanical Connectors
Mechanical Double Chain Sling Specifications

Chain Size
Inches
mm
Double Chain
Lbs at 60o
Grade 80
Master
Links
Grade 100
Kuplok
(Gr 80
Only)
Kupler
(Gr 80
Only)
DOS/DOSH Sling Hooks
DOG Grab Hooks
Cut Chain for

5 Reach
No.
DOF Foundry Hooks
Cut Chain for

5 Reach
No.
No.
Cut Chain for

5 Reach
9/32
6,100
7,400
K-1
9/32
K-20
K-80
4-1
K-72
4-2
K-498
4-0
3/8
10
12,300
15,200
K-2
3/8
K-21
K-81
3-11
K-73
4-1
K-499
3-11
1/2
13
20,800
26,000
K-3
1/2
K-22
K-82
3-9
K-75
3-11
K-500
3-8
5/8
16
31,300
39,100
K-4
5/8
K-23
K-83
3-3
K-76
3-8
K-501
3-3
3/4
20
49,000
K-5
3/4
K-24
K-84
2-10
K-77
3-3
K-502
2-10
7/8
22
59,200
K-6
K-25
K-85
2-8
K-78
3-2
K-503
2-8
26
82,600
2x7x14
K-86
2-5
Welded Triple Chain Sling

Peerless Welded Triple Chain Sling Specifications
Triple Chain Lbs at 60o
Chain Size
Inches
TOS (TOG & TOF are similar to

above with Grab Hooks &
Foundry Hooks)
mm
Grade 80
Oblong Link
Grade 100
A
Dia. Mtl.
In.
B
Ins. Width
In
C
Ins. Length
In.
D
Dia. Mtl
In.
E
Ins. Width
In
F
Ins. Length
In.
9/32
9,100
11,200
3/4
5/8
1-5/32
2-3/16
3/8
10
18,400
22,900
3-1/2
3/4
1-1/2
1/2
13
31,200
39,000
1-1/4
1-1/32
5/8
16
47,000
58,700
1-1/2
12
1-1/8
2-1/4
4-9/16
5-1/4
3/4
20
73,500
1-3/4
12
1-1/2
2-1/2
7/8
22
88,900
14
1-3/4
26
123,900
2-1/4
16
1-7/8
10
1-1/4
32
187,800
2-3/4
16
2-1/4
3-1/2
TOF
TOS or TOSH
Mechanical Triple Chain Sling
TOG Similar with

Grab Hooks
Note:
Assemble using only Kuplex
II or other approved alloy
Mechanical Connectors.
Mechanical Triple Chain Sling Specifications

Chain Size
Inches
mm
Triple Chain Lbs at 60o

Grade 80
Grade 100
Quad
Master
Links
Kuplok
(Gr 80
Only)
Kupler
(Gr 80
Only)
TOS/TOSH Sling Hooks
TOG Grab Hooks
No.
Cut Chain for

5 Reach
No.
TOF Foundry Hooks
Cut Chain for

5 Reach
No.
Cut Chain for

5 Reach
9/32
9,100
11,200
9/32
9/32
K-20
K-80
3-11
K-72
4-0
K-498
3-10
3/8
10
18,400
22,900
3/8
3/8
K-21
K-81
3-6
K-73
3-10
K-499
3-6
1/2
13
31,200
39,000
1/2
1/2
K-22
K-82
3-4
K-75
3-6
K-500
3-4
5/8
16
47,000
58,700
5/8
5/8
K-23
K-83
2-9
K-76
2-9
K-501
2-9
3/4
20
73,500
3/4
3/4
K-24
K-84
2-3
K-77
2-7
K-502
2-8
2-5
K-503
2-4
7/8
22
88,900
7/8
K-25
K-85
2-0
K-78
26
123,900
K-86
1-3
47
SECTION 3 - Chain
Welded Quadruple Chain Sling

Peerless Welded Quadruple Chain Sling Specifications
Quadruple Chain
Chain Size
Inches
Oblong Link
Lbs at 60o
mm
Grade 80
Grade 100
A
Dia. Mtl.
In.
B
Ins. Width
In
C
Ins. Length
In.
D
Dia. Mtl
In.
E
Ins. Width
In
F
Ins. Length
In.
2-3/16
9/32
9,100
11,200
3/4
5/8
1-5/32
3/8
10
18,400
22,900
3-1/2
3/4
1-1/2
1/2
13
31,200
39,000
1-1/4
1-1/32
5/8
16
47,000
58,700
1-1/2
12
1-1/8
2-1/4
4-9/16
3/4
20
73,500
1-3/4
12
1-1/2
2-1/2
5-1/4
7/8
22
88,900
14
1-3/4
26
123,900
2-1/4
16
1-7/8
10
1-1/4
32
187,800
2-3/4
16
2-1/4
10
QOS
(QOG & QOF are similar to above
with Grab Hooks and Foundry Hooks)
Mechanical Quadruple Chain Sling
QOS or QOSH
QOF
Note:
Assemble using only Kuplex II
or other approved alloy Mechanical Connectors.
(QOG similar)
Mechanical Quadruple Chain Sling Specifications

Chain Size
Inches
mm
Quadruple Chain
Grade 80
QOS/QOSH Sling Hooks

Kuplok
Grade 100
Quad
Master
Links
Lbs at 60o
QOG Grab Hooks
QOF Foundry Hooks
Kupler
No.
Cut Chain for

5 Reach
No.
Cut Chain
for 5 Reach
No.
Cut Chain for

5 Reach
3-10
9/32
9,100
11,200
9/32
9/32
K-20
K-80
3-11
K-72
4-0
K-498
3/8
10
18,400
22,900
3/8
3/8
K-21
K-81
3-6
K-73
3-10
K-499
3-6
1/2
13
31,200
39,000
1/2
1/2
K-22
K-82
3-4
K-75
3-6
K-500
3-4
2-9
5/8
16
47,000
58,700
5/8
5/8
K-23
K-83
2-9
K-76
2-9
K-501
3/4
20
73,500
3/4
3/4
K-24
K-84
2-3
K-77
2-7
K-502
2-8
7/8
22
88,900
7/8
K-25
K-85
2-0
K-78
2-5
K-503
2-4
26
123,900
K-86
1-3
Mechanical Adjustable Double Sling

Note:
Short Leg has one foot of chain and a Grab
Hook. Assemble using only Kuplex II or
other approved mechanical connectors
Mechanical Adjustable Double Sling Specifications
Chain Size
Adjustable Double
Chain
Lbs at 60o
Quad
Master
Links
Kuplok
Kupler
Grab Hook
Cut Chain
Sling/Safety
for 5 Reach
Hook
Inches
mm
Grade 80
9/32
6,100
Grade 100
7,400
9/32
9/32
K-20
K-72
K-80
4-0
3/8
10
12,300
15,200
3/8
3/8
K-21
K-73
K-81
3-6
1/2
13
20,800
26,000
1/2
1/2
K-22
K-75
K-82
3-3
5/8
16
31,300
39,100
5/8
5/8
K-23
K-76
K-83
2-9
3/4
20
49,000
3/4
3/4
K-24
K-77
K-84
2-3
7/8
22
59,200
7/8
K-25
K-78
K-85
2-0
SECTION 3 - Chain
48
Use Alloy Chain Attachments Only as
Indicated. Do Not exceed Working
Load Limits.
Alloy Chain Attachments

Oblong Master Link
Oblong Master Link Specifications - 5:1 Design Factor
Link
No.
Bulk
Type:
Forged
Welded
Unpainted
Stock
Number
Type:
Forged
Welded
*598350001
K1
598300047
*598350002
K2
598300048
1 x 3-1/2 x 7
*598350003
K3
1-1/4 x 4 x 8
*598350004
K4
1-1/2 x 6 x 12
*598350005
K5
1-3/4 x 6 x 12
598310006
K6
Link Size A x B x C
In. **
Painted
Stock
Number
5/8 x 3 x 6
3/4 x 3 x 6
Use with Chain Sizes
Working
Load
Limit
Lbs.
Single
Type S
In.
Double
Type D
In.
7,400
9/32
9/32
1.8
15,200
3/8
3/8
2.5
598300049
26,000
1/2 x 5/8
1/2
4.7
598300052
39,100
3/4
5/8
8.5
598300022
58,700
7/8
3/4
17.8
Approx.
Weight
Each
Lbs.
598300025
73,500
7/8
24.8
2 x 7 x 14
598300030
88,900
1-1/4
37.6
2-1/2 x 8 x 16
598300038
135,000
68.1
* Grade 100
**Other sizes available upon request
Quadruple Master Assembly
Quadruple Master Assembly Specifications

Chain Size
PIN #
Inches
mm
Oblong Link
Working
Load
Limit
(lbs.)
A
Mtl Dia.
In.
B
C
Ins Width Ins Length
In
In
D
Mtl Dia.
In
E
Ins Width
In
F
Ins Length
In
Approx
Wt.
Lbs
3.8
599450401
9/32
11,200
3/4
5/8
1-5/32
2-3/16
599450601
3/8
10
22,900
3-1/2
3/4
1-1/2
7.2
599450801
1/2
13
39,000
1-1/4
1-1/32
15.0
599451001
5/8
16
58,700
1-1/2
12
1-1/8
2-1/4
4-9/16
26.2
599401201
3/4
20
73,500
1-3/4
12
1-1/2
2-1/2
5-1/4
42.3
599401401
7/8
22
88,900
14
1-3/4
65.5
599401601
26
123,900
2-1/4
16
1-7/8
10
102.6
599402001
1-1/4
32
187,800
2-3/4
16
2-1/4
10
160.0
Consult specifications for Oblong Master Link for proper configuration of chain assemblies using these fittings.
Master Kuplink
Kuplex II Master Kuplink Specifications
Stock
Number
Kuplink
No.
Size of
Chain
In.
mm
Working
Load
Limit
(lbs.)
A
In.
B
In.
C
In.
D
In.
E
In.
F
In.
G
In.
H
In.
I
In.
J
In.
Weight
Lbs
2.5
598350011
K-11
9/32
4,300**
3/4
1/2
7-1/8
1/8
5/16
13/32
11/32
5/8
598350012
K-12
3/8
10
8,800**
3/4
1/2
7-1/4
5/32
7/16
9/16
15/32
7/8
598350013
K-13
1/2
13
15,000** 15/16
11/16
7-9/16
3/16
9/16
3/4
21/32 1-1/8
598350014
K-14
5/8
16
22,600**
1-1/8
7/8
9-15/16
1/4
11/16
15/16
13/16 1-1/2
K-15
3/4
20
28,300*
1-1/4
7/8
10-3/16
5/16
13/16 1-7/32
598300015
*
Use for Grade 80 assembly - Not suitable for Grade 100 assembly
** Values shown for these sizes are Grade 100.
1-3/4
2.7
4.4
8.2
11.6
49
SECTION 3 - Chain
Crosby ELIMINATOR Fittings

A-1362
A-1361
The Crosby ELIMINATOR combines selected features and functionality

of a master link, connecting link, grab hook and adjuster legs to provide
you with one fitting that is suitable for applications that require an adjustable length chain sling.
Forged Alloy Steel - Quenched and Tempered.
Innovative two piece design allows for maximum flexibility.
Individually Proof Tested with certification.
The Crosby ELIMINATOR, if properly installed and locked, can be
used for personnel lifting applications and meets the intent of OSHA
Rule 1926.550 (g) (4) (iv) (B).
Suitable for use with Grade 100 and Grade 80 chain.
Engineered to accomodate optional locking pins that can be inserted to
lock the shortened chain legs into place.
Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles.
Use the A-1361 and A-1362 in combination to make 3 leg chain slings.
Look for the platinum Color - Crosby Grade 100 Alloy Products.
All sizes are RFID equipped
Crosby ELIMINATOR Fittings

A-1361 Single Hook
Dimensions
(in.)
Chain Size
Inches
mm
Frame
Size
Working
A-1361
L-1361
Load Limit
Stock No. Stock No.
(lbs.)*
Weight
Each
(lbs.)
AA
1/4
4300
1049797
1049802
3.9
8.20
3.88
.90
3.00
.94
3.50 4.40
9.78
5/16
5700
1049804
1049809
3.9
8.18
3.88
.90
3.00
.94
3.50 4.40
9.78
3/8
10
8800
1049813
1049818
6.5
10.05 4.81
1.16
3.50 1.13 4.00 5.20
12.06
1/2
13
15000
1049822
1049827
13.5
12.88 6.00
1.63
4.13 1.31 5.00 6.39
15.57
5/8
16
22600
1049831
1049836
24.1
15.26 6.88
1.96
4.75 1.63 6.00 7.41
18.58
* Proof tested at 2.5 times the Working Load Limit.

Minimum Ultimate Load is 4 times the Working Load Limit.
A-1362 Single Hook

Dimensions
(in.)
Chain Size
Inches
mm
Frame
Size
Working
A-1362
L-1362
Load Limit
Stock No. Stock No.
(lbs.)*
Weight
Each
(lbs.)
AA
1/4
8600
1049859
1049913
4.7
8.20
3.88
.90
3.00
.94
3.50 4.40
5/16
11400
1049868
1049922
4.7
8.18
3.88
.90
3.00
.94
3.50 4.40
10.10
3/8
10
17600
1049877
1049931
8.1
10.05 4.81
1.16
3.50 1.13 4.00 5.20
12.56
1/2
13
30000
1049886
1049940
17.3
12.88 6.00
1.63
4.13 1.31 5.00 6.39
16.25
5/8
16
45200
1049895
1049949
31.5
15.26 6.88
1.96
4.75 1.63 6.00 7.41
19.33
* Proof tested at 2.5 times the Working Load Limit.

Minimum Ultimate Load is 4 times the Working Load Limit.
10.10
SECTION 3 - Chain
50
Crosby 8/10 LOK-A-LOY Alloy Connecting Link

TM
A-1337 Alloy Connecting Link
Suitable for use with both Grade 80 and Grade

100 Chain.
Individually Proof Tested at 2-1/2 times
Working Load Limit with certification.
Locking system that provides for simple
assembly and disassembly - no special tools
needed.
25% stronger than Grade 80.
Meets ASTM A-952-96 standards for Grade
100 chain fittings.
Fatigue rated.
LOK-A-LOY 10 Alloy Connecting Link

Chain Size
Dimensions
(in.)
Pkg.
Qty.
Weight
Each
(lbs.)
Working
Load Limit
(lbs.)*
F
.56
(in.)
(mm)
A-1337
Stock No.
9/32 (1/4)
1015109
60
.28
4300
.36
1.88
1.85
.78
.63
5/16
1015118
50
.33
5700
.36
2.18
1.97
.91
.66
.63
3/8
10
1015127
40
.73
8800
.45
2.53
2.50
1.03
.85
.75
1/2
13
1015136
12
1.67
15000
.64
3.44
3.22
1.44
1.09
.94
5/8
16
1015145
10
2.86
22600
.75
4.13
3.78
1.73
1.38
1.13
3/4
20
1015154
5.00
35300
.93
4.62
4.62
2.03
1.62
1.28
7/8
22
1015163
7.50
42700
1.06
5.46
5.46
2.27
2.00
1.49
25
1015172
11.03
59700
1.22
5.98
6.13
2.44
2.25
1.76
1-1/4
32
1015181
20.38
90400
1.50
7.43
7.59
3.07
2.56
2.23
* Ultimate Load is 4 times the Working Load Limit.
51
SECTION 3 - Chain
Kuplex II Kuplers
Kuplers are connection devices between Master
Links and Chain on all multiple leg Kuplex II
Chain Slings. On single leg assemblies Kuplers can
be used in lieu of the popular Kuplink. Resembling
a shackle in appearance the Kuplers provide a
high strength, high integrity connection when used
to connect a special attachment to the alloy chain
assembly.
Kuplers Specifications
Chain Size
Grade
Working
Load
Limit
Gr 80
3,500
7/16
13/16
1-5/16
10
Gr 80
7,100
19/32
1-1/16
1-13/16
13
Gr 80
12,000
3/4
1-5/16
2-9/16
9/16
3/16
16
Gr 80
18,100
15/16
1-5/8
11/16
1/4
20
Gr 80
28,300
1-15/16
3-13/32
13/16
5/16
1-19/32
3-7/8
15/16
3/8
1-27/32
1-9/32
1-1/16
6.1
4-1/4
1-1/16
1-7/32
1-3/32
2-3/8
8.4
1-15/16
2-9/32
1-1/2
1-11/32
2-7/8
14.8
Kupler
No.
Inches
598150020
K-20
9/32
598150021
K-21
3/8
598150022
K-22
1/2
598150023
K-23
5/8
598100024
K-24
3/4
598100025
K-25
7/8
22
Gr 80
34,200
1-1/8
2-1/4
599100026
K-26
26
Gr 63
35,900*
1-1/4
2-11/16
599100028
K-28
1-1/4
32
Gr 63
56,100*
1-1/2
3-1/2
5-1/8
PIN #
mm
A
In.
B
In.
C
In.
D
In.
E
In.
G
In.
H
In.
I
In.
J
In.
Wt.
Lbs.
5/16
1/8
23/32
13/32
11/32
5/8
0.3
7/16
5/32
7/8
9/16
15/32
7/8
0.7
1-3/32
3/4
21/32
1-1/8
1.5
1-11/32
15/16
13/16
1-1/2
3.0
1-7/32
1-3/4
4.8
Working Load Limits must not be exceeded.

Kuplex II Kuplok
Kuplok mechanical coupling links, an essential component of mechanically coupled slings, are used to assemble Chain Legs to the Master Links and/or attach eye
type fittings.
Grade 80 Fitting
Do Not Use with Grade 100
G80 Kuplok Specifications
Chain Size
PIN #
Inches
mm
Grade
Working
Load
Limits
Lbs.
Max
Width
In.
Dia. Hole to
Accept
Male Leg
In.
Wt.
Each
Lbs.
Qty per
Box
A
In.
B
In.
C
In.
D
In.
E
Largest Mtl.
Diam. to be used
with Kuplok
In.
594200400
9/32
Gr 80
3,500
1-13/16
35/64
0.3
3/8
11/16
5/8
1-13/16
1/2
594200601
3/8
10
Gr 80
7,100
2-7/16
47/64
0.6
1/2
15/16
2-3/8
3/4
594200801
1/2
13
Gr 80
12,000
3-11/32
59/64
1.5
5/8
1-1/4
1-3/8
3-11/32
594201001
5/8
16
Gr 80
18,100
4-3/32
1-1/16
2.4
3/4
1-1/2
1-11/16
1-1/4
594201201
3/4
20
Gr 80
28,300
4-13/16
1-1/4
3.6
15/16
1-3/4
4-3/4
1-5/8
These fittings are not rated for Grade 100 chain assemblies.
SECTION 3 - Chain
52
Accoloy Eye Sling Hook
Accoloy Eye Sling Hook Specifications

Chain Size
PIN #
Inches
mm
Grade
Working
Load
Limits
Lbs.
Wt.
Lbs.
D
In.
E
In.
F
In.
G
In.
H
In.
I
In.
K
In.
1-1/16
592353080
9/32
Gr 100
4,300
1.00
3-13/16
1-7/32
5/8
11/16
5-7/32
3-5/8
592353081
3/8
10
Gr 100
8,800
2.5
5-3/8
1-5/8
13/16
15/16
7-1/4
4-13/16
1-3/8
592353082
1/2
13
Gr 100
15,000
5.30
6-9/16
1-1/32
1-3/16
8-15/16
6-1/16
1-13/16
592353083
5/8
16
Gr 100
22,600
7.90
7-3/4
2-7/16
1-1/4
1-5/16
10-3/8
7-5/32
2-1/8
592303084
3/4
20
Gr 80
28,300
11.20
8-7/8
2-11/16
1-1/2
1-1/2
11-15/16
7-7/8
2-5/16
*592303085
7/8
22
Gr 80
34,200
19.60
10-1/8
1-3/4
1-3/4
13-3/4
9-5/32
2-3/4
**592303086
26
Gr 63
35,900*
21.80
11-1/16
3-3/8
1-7/8
15
10-1/16
**592303088
1-1/4
32
Gr 63
56,100*
44.40
13-1/8
4-1/16
2-1/4
2-5/16
18
12-5/16
3-3/4
* Do Not Use with Grade 100 assemblies
** Do Not Use with Grade 80 or Grade 100 assemblies

Kuplex II Clevis Sling Hook
Kuplex II Hooks are engineered to make a rapid,
high integrity chain to hook connection with these
major advantages:
No bulky connection link is required - this permits

easy withdrawal of the hook from beneath the load.
All hooks are color coded ACCO orange to provide

maximum visibility.
Kuplex II Clevis Sling Hook Specifications

PIN #
Chain Size
Kuplink
No.
Inches mm
Grade
Working
Load Limit
A
In.
B
In.
C
In.
D
In.
3-5/8
598850080
K-80
9/32
Gr 100
4,300
1-1/2
3-5/16
598850081
K-81
3/8
10
Gr 100
8,800
1-9/32
2-1/32
4-25/32 4-13/16
598850082
K-82
1/2
13
Gr 100
15,000
1-11/16
2-7/16
6-1/8
6-1/8
E
In.
F
In.
G
In.
H
In.
I
In.
J
In.
Wt.
Lbs
1.3
1-1/8
1/8
5/16
13/32
11/32
5/8
1-5/8
5/32
7/16
9/16
15/32
7/8
3.1
3/16
9/16
3/4
21/32
1-1/8
6.5
598850083
K-83
5/8
16
Gr 100
22,600
1-15/16
2-7/8
6-13/16
7-7/32
2-7/16
1/4
11/16
15/16
13/16
1-1/2
10.7
K-84
3/4
20
Gr 80
28,300
2-3/8
3-1/4
8-17/32
8-3/16
2-11/16
5/16
13/16
1-7/32
1-3/4
16.6
K-85
7/8
22
Gr 80
34,200
2-3/4
3-21/32
9-5/8
9-15/32
3/8
15/16
1-9/32
1-1/16
25.9
K-86
26
Gr 63
35,900*
3.0
4-1/16
3-3/8
1-3/8
1-7/32
1-3/32
1-7/8
26.9
598800084
598800085
**
599800086
10-1/16 10-1/16
** Do Not Use with Grade 80 or Grade 100 assemblies
53
SECTION 3 - Chain
Crosby Grade 100 SHUR-LOC Hook
S-1316
Forged Alloy Steel - Quenched and Tempered

Recessed trigger design is flush with the hook body, which
protects the trigger from potential damage.
Easy to operate with enlarged thumb access.
Individually Proof Tested to 2-1/2 times the Working Load
Limit with certification.
Positive Lock Latch is Self-Locking when hook is loaded.
Eye style is designed with Engineered Flat to connect to
S-1325 chain coupler.
The SHUR-LOC hook, if properly installed and locked, can
be used for personnel lifting applications and meets the
intent of OSHA Rule 1926.550 (g) (4) (iv) (B).
Fatigue rated at 1-1/2 times the Working Load Limit at
20,000 cycles
Look for the Platinum Color - Crosby Grade 100 Alloy
Products.
S-1317
SHUR-LOC Hook Series with Positive Locking Latch

S-1316 Eye Hook
mm
Working
Load Limit
(lbs.)*
S-1316
Stock No.
Chain SIze
Inches
Weight
Each
(lbs.)
Dimensions
(in.)
A
AA
1.50
3200
1022896
.85
.78
3.95
.79
2.60
.63
1.14
1/4-5/16
7-8
5700
1022914
1.80
1.08
5.31
1.10
3.50
.81
1.48
2.00
3/8
10
8800
1022923
3.40
1.30
6.57
1.17
4.39
.94
1.83
2.50
1/2
13
15000
1022932
6.00
1.65
8.23
1.67
5.45
1.16
2.22
3.00
5/8
16
22600
1022941
15.1
2.20
10.06
2.04
6.56
1.50
2.65
3.50
3/4
18-20
35300
1022942
19.0
2.60
10.77
2.22
7.76
2.03
3.52
7/8
22
42700
1022943
28.0
2.87
12.49
2.45
8.75
2.20
3.83
26
59700
1022944
49.5
3.15
14.60
3.21
9.87
2.68
4.09
* Minimum Ultimate Load is 4 times the Working Load Limit.
S-1317 Clevis Hook
Inches
mm
Working
Load Limit
(lbs.)*
3200
Chain SIze
Dimensions
(in.)
S-1317
Stock No.
Weight
Each
(lbs.)
AA
1028991
.77
3.44
.79
2.60
4.75
.63
1.16
1.50
1/4
4300
1029000
1.79
4.48
1.10
3.51
6.25
.81
1.48
2.00
5/16
5700
1029009
1.79
4.47
1.10
3.51
6.25
.81
1.48
2.00
3/8
10
8800
1029018
3.19
5.53
1.17
4.39
7.54
.94
2.21
2.50
1/2
13
15000
1029027
6.75
6.81
1.67
5.49
9.52
1.16
2.22
3.00
3.50
5/8
16
22600
1029036
11.94
8.22
2.04
6.55
11.61
1.50
2.65
3/4
18-20
35300
1029071
15.0
9.42
2.22
7.76
13.21
2.03
3.52
7/8
22
42700
1029080
27.0
11.14
2.45
8.75
15.45
2.20
3.83
26
59700
1029089
50.0
12.56
3.21
9.87
18.44
2.68
4.09
SECTION 3 - Chain
54
Accoloy Eye Grab Hook
Accoloy Eye Grab Hook Specifications

Chain Size
PIN #
Inches
mm
Grade
Working
Load
Limits
(lbs).
Wt.
Lbs.
D
In.
E
In.
F
In.
G
In.
H
In.
I
In.
592252072
9/32
Gr 100
4,300
0.7
2-11/16
11/32
5/8
39/64
4-1/8
2-3/8
592252073
3/8
10
Gr 100
8,800
1.2
3-3/8
31/64
13/16
47/64
5-1/32
2-27/32
3-23/32
592252075
1/2
13
Gr 100
15,000
2.6
4-1/4
41/64
1-1/32
31/32
6-15/32
592252076
5/8
16
Gr 100
22,600
4.9
5-9/32
25/32
1-1/4
1-3/16
4-9/16
*592202077
3/4
20
Gr 80
28,300
8.2
6-1/4
15/16
1-1/2
1-13/32
9-15/32
5-15/32
7/8
22
Gr 80
34,200
12.1
7-1/4
1-3/32
1-3/4
1-5/8
11
6-3/8
592202078
592202079
26
Gr 80
47,700
19.9
1-3/16
1-7/8
1-13/16
12-5/32
6-3/4
*592202051
1-1/4
32
Gr 80
72,300
40.0
10-1/2
1-1/2
2-1/4
2-1/2
15-9/16
8-1/4

Kuplex II Clevis Grab
Kuplex II Grab Hooks provide a chain to grab hook connection method that
completely eliminates the necessity for cumbersome mechanical connection
devices. The Kuplex II Grab Hook needs no more clearance than the chain
with which it is used when being pulled from beneath a load.
The Kuplex II Grab Hook is identified by hook number and chain size, permitting the selection of the proper hook for the chain being used.
Kuplex II Grab Hooks are made from premium alloy steel which is drop
forged to precise tolerances.
Kuplex II Clevis Grab Hook Specifications
Chain Size
Working
Load
Limits
(lbs.)
Hook
No.
Inches
598750072
K-72
9/32
Gr 100
4,300
1-1/16
1-1/4
2-1/8
2-1/8
3/8
598750073
K-73
3/8
10
Gr 100
8,800
1-1/32
1-1/2
2-7/8
2-5/8
1/2
598750075
K-75
1/2
13
Gr 100
15,000
1-1/4
3-9/16
3-11/32
5/8
3/16
598750076
K-76
5/8
16
Gr 100
22,600
1-5/8
2-3/8
4-5/16
4-1/4
25/32
1/4
*598700077
K-77
3/4
20
Gr 80
28,300
1-7/8
2-15/16
5-3/32
5-1/16
7/8
5/16
K-78
7/8
22
Gr 80
34,200
2-1/8
3-1/2
5-7/8
6-3/32
1-1/8
3/8
PIN #
598700078
mm
Grade
A
In.
B
In.
C
In.
D
In.
E
In.
F
In.
G
In.
H
In.
I
In.
1/8
5/16
13/32
11/32
5/8
0.6
5/32
7/16
9/16
15/32
7/8
1.5
9/16
3/4
21/32
1-1/8
3.4
11/16
15/16
13/16
1-1/2
6.2
13/16
1-7/32
1-3/4
10.1
15/16
1-9/32 1-1/16
14.8
J
In.
Wt.
Lbs.
55
SECTION 3 - Chain
Crosby 8/10TM Alloy Cradle Grab Hook

Innovative cradle design allows for 100% efficiency of
Grade 100 chain.
Individually Proof Tested to 2-1/2 times the Working
Load Limit with certification.
Each hook has a Product Identification Code (PIC) for
material traceability, along with the size and the name
Crosby & U.S.A. in raised letters.
Suitable for use with Grade 100 and Grade 80 chain in
overhead lifting applications as long as hook is Proof
Tested as part of the chain sling assembly or as an
individual component. Per ANSI B30.9-1.
The use of A-1338 Cradle Grab Hook will allow 100
percent of the chain sling capacity. When used to
hook back to chain leg to form a choker, the angle of
the choke must be 120 degrees or greater. When used
as a chain shortener, minimize twist of chain and
ensure chain is fully engaged in hook.
Fatigue rated at 1-1/2 times the Working Load Limit at
20,000 cycles.
Look for the Platinum Color - Crosby Grade 100 Alloy
Products.
A-1338
A-1338 Cradle Grab Hook

Dimensions
(in.)
Chain Size
Inches
mm
Working Load
Limit
(lbs.)*
A-1338
Stock No.
Weight
Each
(lbs.)
1/4
4300
1049417
.45
1.72
2.54
2.20
3.88
1.50
.88
5/16
5700
1049426
.99
1.72
2.54
2.18
3.88
1.50
.88
3/8
10
8800
1049435
1.80
1.85
3.09
2.58
4.69
1.83
1.09
1/2
13
15000
1049444
3.92
2.39
3.83
3.28
5.88
2.25
1.42
5/8
16
22600
1049453
7.00
2.67
4.52
3.85
7.03
2.94
1.75
* Ultimate Load is 4 times the Working Load Limit.
SECTION 3 - Chain
56
Accoloy Eye Foundry Hook
Accoloy Eye Foundry Hook Specifications

Chain Size
PIN #
Inches
Working
Load
Limits
(lbs.)
Grade
mm
Wt.
Lbs.
D
In.
E
In.
F
In.
G
In.
J
In.
Spherical
Radius
In.
K
In.
592454498
9/32
Gr 80/100
4,300
2.0
4-3/4
2-5/8
5/8
1-9/16
1-1/8
1/4
592454499
3/8
10
Gr 80/100
8,800
4.1
5-3/4
3-1/8
13/16
1-1/4
1-7/8
1-3/8
5/16
592454500
1/2
13
Gr 80/100
15,000
7.0
6-7/8
3-3/4
1-1/32
1-1/2
2-1/4
1-5/8
3/8
592454501
5/8
16
Gr 80/100
22,600
10.5
8-1/16
4-1/4
1-1/4
1-3/4
2-5/8
1-7/8
7/16
*592404502
3/4
20
Gr 80
28,300
18.2
9-1/4
4-3/4
1-1/2
2-1/8
1/2
592404503
7/8
22
Gr 80
34,200
26.0
10-3/8
5-1/4
1-3/4
2-1/4
3-3/8
2-3/8
9/16
592404504
26
Gr 80
47,700
35.0
11-9/16
5-3/4
2-1/2
3-3/4
2-3/4
5/8
592404505
1-1/4
32
Gr 80
72,300
50.0
12-3/4
6-3/8
2-1/4
4-1/4
3-1/4
3/4

Kuplex II Clevis Foundry Hook
Kuplex II Foundry Hooks when properly used are designed for

maximum service such as those applications encountered in
foundry work. The throat of the hook is designed to accommodate standard trunnions. The tip of the hook is designed for ease
of insertion into holes in the casing.
Kuplex II Clevis Foundry Hook Specifications

Chain Size
Grade
Working
Load
Limit
A
In.
B
In.
C
In.
D
In.
E
In.
Gr 100
4,300
1-1/8
1-9/16
4-7/16
4-7/8
2-5/8
10
Gr 100
8,800
1-3/8
1-7/8
5-1/2
5-7/8
13
Gr 100
15,000
1-1/2
2-1/4
6-5/8
6-7/8
3-7/8
16
Gr 100
22,600
2-3/16
2-9/16
7-5/8
8-9/32
Gr 80
28,300
2-3/4
8-13/16
9-5/8
Gr 80
34,200
3-3/8
PIN #
Hook
No.
Inches
598200498
K-498
9/32
598200499
K-499
3/8
598200500
K-500
1/2
598200501
K-501
5/8
598200502
K-502
3/4
20
598200503
K-503
7/8
22
mm
9-15/16 10-11/16
F
In.
G
In.
H
In.
I
In.
J
In.
Wt.
Lbs.
1/8
5/16
13/32
5/32
7/16
9/16
11/32
7/8
2.1
15/32
1-1/8
3/16
9/16
3/4
21/32
1-1/2
4.3
8.2
4-1/8
1/4
11/16
15/16
13/16
1-3/4
14.4
4-13/16
5/16
13/16
1-7/32
24.5
5-3/8
3/8
15/16
1-9/32
1-1/16
2-1/4
33.1
57
SECTION 3 - Chain
A-1355 Chain Choker Hook

Forged Alloy Steel - Quenched and Tempered
Individually Proof Test with certification
Rated for Grade 100 chain in choker applications
Each hook has a Product identification Code (PIC) for material
Traceability, along with size and the name Crosby & U.S.A. in
raised letters.
Fatigue rated at 1-1/2 times the Working Load Limit at 20,000
cycles.
Look for the Platinum Color - Crosby Grade 100 Alloy Products.
For use with S-1325 Chain Coupler Link
A-1355 Chain Choker Hook

Grade 100 Alloy
Chain Size
(in.)
(mm)
Working
Load Limit
(lbs.) *
A-1355
Stock
No.
Weight
Each
(lbs.)
1/4 - 5/16
7-8
5700
1015204
.77
2.05
1.18
4.83
.79
.69
.65
3/8
10
8800
1015213
1.65
2.66
1.57
6.07
.93
.93
.69
1/2
13
15000
1015222
3.14
3.35
2.03
7.61
1.18
1.26
.94
5/8
16
22600
1015231
6.97
4.21
2.52
9.68
1.54
1.12
1.18
Dimensions (in.)
* Ultimate Load is 4 times the Working Load Limit..
S-1325 Grade 100 Chain Coupler

Designed to connect Grade 100 chain fittings produced with
Engineered Flat to Grade 100 chain.
Individually Proof Tested to 2-1/2 times the Working Load Limit
with certification.
Locking system that provides for simple assembly and disassembly
- no special tools required.
Fatigue rated at 1-1/2 times the Working Load Limit at 20,000
cycles.
S-1325 Grade 100 Cahin Coupler
Chain Size
(in.)
(mm)
S-1325 Working Load

Weight
Stock No. Limit (lbs.) * Each (lbs.)
Dimensions (in.)
C
1098496
3200
.25
1.03
.74
1.74
1/4
1098500
4300
.50
1.41
.88
2.32
5/16
1098504
5700
.50
1.40
.88
2.32
3/8
10
1098508
8800
.80
1.84
1.18
2.72
1/2
13
1098512
15000
1.70
2.12
1.50
3.62
5/8
16
1098516
22600
1.90
2.84
1.96
4.40

Alloy Chain Sling Working Load Limits

Uploaded by

Copyright:

Available Formats

Alloy Chain Sling Working Load Limits

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Alloy Chain Sling Working Load Limits

Uploaded by

Copyright:

Available Formats

SECTION 3 - Chain

Alloy Chain Sling Working Load Limits

Double (D) Chain Slings /Lbs.

Triple (T) & Quadruple (Q) Chain Slings /Lbs.

NOTE: Working Load Limit should not be exceeded

Double (D) Chain Slings /Lbs.

Triple (T) & Quadruple (Q) Chain Slings /Lbs.

NOTE: Working Load Limit should not be exceeded

CAUTION: Do not use Grade 80 Fittings with Grade 100 Chain.

Working Load Limit **

Nominal Material Dia.

Nominal Inside Length

Nominal Inside Width

Grade 100 Grade 80 P8A

higher working load limit and a lift angle greater than or

FOR MORE INFORMATION CONTACT OUR NEAREST BRANCH OFFICE

Welded Single Chain Slings

Mechanical Single Chain Sling

Note: Assemble using only

Mechanical Chain Sling Specifications

SOS/SOSH Sling Hooks

SOG Grab Hook

SOF Foundry Hook

Welded Double Chain Sling

FOR MORE INFORMATION CONTACT OUR NEAREST BRANCH OFFICE

Mechanical Double Chain Sling

Mechanical Double Chain Sling Specifications

DOS/DOSH Sling Hooks

DOG Grab Hooks

Cut Chain for

DOF Foundry Hooks

Cut Chain for

Cut Chain for

Welded Triple Chain Sling

TOS (TOG & TOF are similar to

Mechanical Triple Chain Sling

TOG Similar with

Mechanical Triple Chain Sling Specifications

Triple Chain Lbs at 60o

TOS/TOSH Sling Hooks

TOG Grab Hooks

Cut Chain for

TOF Foundry Hooks

Cut Chain for

Cut Chain for

FOR MORE INFORMATION CONTACT OUR NEAREST BRANCH OFFICE

Welded Quadruple Chain Sling

Mechanical Quadruple Chain Sling

Mechanical Quadruple Chain Sling Specifications

QOS/QOSH Sling Hooks

QOG Grab Hooks

QOF Foundry Hooks

Cut Chain for

Cut Chain for

Mechanical Adjustable Double Sling

FOR MORE INFORMATION CONTACT OUR NEAREST BRANCH OFFICE

Alloy Chain Attachments

Oblong Master Link Specifications - 5:1 Design Factor