Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 515 views

    ASME IIA SA29 SA29M Steel Bars, Carbon and Alloy, Hot-Wrought and Cold-Finished

    Uploaded by

    Amanda Ariesta Aprilia
    This specification covers requirements for carbon and alloy steel bars that are hot-wrought and cold-finished. It specifies chemical composition limits that shall conform to those in the purchase order or individual product specification. For carbon steel, common grades and their chemical composition limits are provided in Tables 1 and 2. Requirements for alloy steel compositions are also specified. The manufacturer shall determine the chemical composition of each heat or cast in accordance with specified test methods and practices.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    ASME IIA SA29 SA29M Steel Bars, Carbon and Alloy, Hot-Wrought and Cold-Finished

    Uploaded by

    Amanda Ariesta Aprilia
    515 views1 page
    This specification covers requirements for carbon and alloy steel bars that are hot-wrought and cold-finished. It specifies chemical composition limits that shall conform to those in the purchase order or individual product specification. For carbon steel, common grades and their chemical composition limits are provided in Tables 1 and 2. Requirements for alloy steel compositions are also specified. The manufacturer shall determine the chemical composition of each heat or cast in accordance with specified test methods and practices.

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This specification covers requirements for carbon and alloy steel bars that are hot-wrought and cold-finished. It specifies chemical composition limits that shall conform to those in the purchase order or individual product specification. For carbon steel, common grades and their chemical composition limits are provided in Tables 1 and 2. Requirements for alloy steel compositions are also specified. The manufacturer shall determine the chemical composition of each heat or cast in accordance with specified test methods and practices.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    515 views1 page

    ASME IIA SA29 SA29M Steel Bars, Carbon and Alloy, Hot-Wrought and Cold-Finished

    Uploaded by

    Amanda Ariesta Aprilia
    This specification covers requirements for carbon and alloy steel bars that are hot-wrought and cold-finished. It specifies chemical composition limits that shall conform to those in the purchase order or individual product specification. For carbon steel, common grades and their chemical composition limits are provided in Tables 1 and 2. Requirements for alloy steel compositions are also specified. The manufacturer shall determine the chemical composition of each heat or cast in accordance with specified test methods and practices.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 1

    ASME IIA SA29 SA29M Steel Bars, Carbon and Alloy, Hot-Wrought and Cold-Finished This specification covers

    a group of common requirements which, unless otherwise specified in the purchase order or in an individual specification, shall apply to carbon and alloy steel bars under each of the following ASTM specifications (or under any other ASTM specification which invokes this specification or portions thereof) !n case of any conflict in requirements, the requirements of the purchase order, the individual material specification, and this general specification shall prevail in the sequence named The values stated in inch"pound units or S! units are to be regarded as the standard #ithin the te$t, the S! units are shown in brackets The values stated in each system are not e$act equivalents% therefore, each system must be used independently of the other &ombining values from the two systems may result in nonconformance with the specification 'or purposes of determining conformance to this specification and the various material specifications referenced in ( (, dimensional values shall be rounded to the nearest unit in the right"hand place of figures used in e$pressing the limiting values in accordance with the rounding method of )ractice * +, Chemi al Com!osition "imits# The chemical composition shall conform to the requirements specified in the purchase order or the individual product specifications 'or convenience the grades commonly specified for carbon steel bars are shown in Tables ( and + -ars may be ordered to these grade designations and when so ordered shall conform to the specified limits by heat analysis #hen compositions other than those shown in Tables ( and + are required, the composition limits shall be prepared using the ranges and limits shown in Table . for carbon steel and Table / for alloy steel Heat or Cast Analysis# The chemical composition of each heat or cast shall be determined by the manufacturer in accordance with Test Methods, )ractices, and Terminology A 01( The heat or cast analysis shall conform to the requirements specified in the product specification or purchase order These can be the heat chemical range and limit for a grade designated in Tables ( and +, or another range and limit in accordance with / ( +, or with requirements of the product specification NOTE 1 Heat analysis for lead is not determinable since lead is added to the ladle stream while each ingot is poured. When specified as an added element to a standard steel, the percentage of lead is reported as .1! to ."! incl, which is the range commonly specified for this element. !f requested or required, the heat analysis shall be reported to the purchaser or his representative 2eporting of significant figures and rounding shall be in accordance with Test Methods, )ractices, and Terminology A 01( 3isit our site to download http455code"pdf com5asme"iia"sa+,"sa+,m

    You might also like