Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 85 views

    AN8806SB: Three-Beam Method Head Amplifier IC For CD Player

    Uploaded by

    aldo
    This document provides information about an IC (AN8806SB) that can be used for CD and CD-ROM players. It includes an overview of the IC's features and block diagram. The IC integrates various amplifiers needed for CD players, including an RF amplifier, focus error amplifier, and tracking error amplifier. It also describes the pin functions and provides electrical specifications for the different amplifiers and components.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    AN8806SB: Three-Beam Method Head Amplifier IC For CD Player

    Uploaded by

    aldo
    85 views10 pages
    This document provides information about an IC (AN8806SB) that can be used for CD and CD-ROM players. It includes an overview of the IC's features and block diagram. The IC integrates various amplifiers needed for CD players, including an RF amplifier, focus error amplifier, and tracking error amplifier. It also describes the pin functions and provides electrical specifications for the different amplifiers and components.

    Original Title

    AN8806SB

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information about an IC (AN8806SB) that can be used for CD and CD-ROM players. It includes an overview of the IC's features and block diagram. The IC integrates various amplifiers needed for CD players, including an RF amplifier, focus error amplifier, and tracking error amplifier. It also describes the pin functions and provides electrical specifications for the different amplifiers and components.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    85 views10 pages

    AN8806SB: Three-Beam Method Head Amplifier IC For CD Player

    Uploaded by

    aldo
    This document provides information about an IC (AN8806SB) that can be used for CD and CD-ROM players. It includes an overview of the IC's features and block diagram. The IC integrates various amplifiers needed for CD players, including an RF amplifier, focus error amplifier, and tracking error amplifier. It also describes the pin functions and provides electrical specifications for the different amplifiers and components.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 10

    ICs for CD/CD-ROM Player

    AN8806SB
    Three-Beam Method Head Amplifier IC for CD Player
    I Overview
    The AN8806SB is a head amplifier IC supporting the digital servo. Combination of this IC and the MN6627XX series allows the rational CD system to be constructed with small number of external parts.
    0.30.11 1 36 Umit : mm

    I Features Single supply operation IV amplifier, tracking error amplifier, focus error amplifier, RF amplifier and APC built-in Detectors of DO, CROSS, OFTR and vibration built-in Combination with the MN6627XX series providing complete automatic adjustment for tracking balance, tracking gain, tracking offset, focus balance, focus gain and focus offset

    0.8

    18

    19
    0.1 0.2 + 0.05

    0.10.1

    1.30.25 2.850.2

    0.5

    8.40.3 11.930.3

    36-lead SSOP package (SSOP036-P-0450A)

    1.30.25

    15.20.2

    AN8806SB

    RFIN CEA RF FEOUT FE ARF CENV 11 12 ENV 19 CSBDO + + + EQ + VCBA + OFTR AGC RF Det. BDO ENV Det. 13 14 BDO 8 9 10 17 RFDET 27 28 29 6 7 RFOUT FBAL CACC + + +

    I Block Diagram

    A+C

    36

    15 CSBRT 16 OFTR

    E IA+C IB+D FBAL : FEOUT : FEOUT + : FEOUT +

    B+D + VCBA

    35

    VCC

    PDFR IF IE TBAL VCBA : TEOUT : TEOUT + : TEOUT +

    31

    18

    34

    F Subtraction +

    20 VREF

    PDER VCBA + +

    32

    21 LD OFF + + 2 LD 25 TEOUT 26 TE 23 TEBPF 22 V Det. 1 PD 4 LDP 3 LD ON/OFF +

    33

    30 TBAL CROSS

    ICs for CD/CD-ROM Player

    24

    ICs for CD/CD-ROM Player


    I Pin Description
    Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 PD LD LDON LDP VCC RF RFOUT RFIN C. AGC ARF C. ENV C. EA C. SBDO BDO C. SBRT OFTR NRFDET GND ENV VREF LD OFF VDET TEBPF CROSS TEOUT TE FEOUT FE FBAL TBAL PDFR PDER PDE PDF PDBD PDAC I I I I O O I O I O O I O I I I O O O O I O I Pin Name I/O I O I I Function Description Signal input of PD for LD output monitor Connected to base of external Tr for LD drive ON/OFF switching of LD APC Switching of APC reference voltage Supply connecting pin

    AN8806SB

    Reverse rotation input pin of RF Amp. for connecting a resistance Output pin of RF Amp. (reverse rotation amp.) RF AGC input pin C-connecting pin for RF AGC loop filter RF output pin after AGC C-connecting pin for RF C-connecting pin for amp. C-connecting pin for low speed detection of dark level DO BDO detection output pin; positive logic C-connecting pin for OFTR low speed detection OFF TRACK detection output pin; positive logic Output pin of RF signal amplitude detection ; negative logic Ground pin ENV output pin VCC 0.5 (V) output pin Input pin for forced stop of LD APC Output pin of vibration detection Input pin of vibration detection Output pin of TE CROSS detection signal Output pin of TE Amp. Inverting input pin of TE Amp. for connecting a resistance Output pin of FE Amp. Inverting input pin of FE Amp. for connecting a resistance Control signal input pin for FO balance adjustment Control signal input pin for TE balance adjustment Resistance-connected pin setting the IV conversion resistance value of PDE Resistance-connected pin setting the IV conversion resistance value of PDF Connected to PIN Diode E Connected to PIN Diode F Connected to B/D of astigmatic 4-division PD Connected to A/C of astigmatic 4-division PD

    I Absolute Maximum Ratings (Ta=25C)


    Parameter Supply Voltage Supply Current Power Dissipation Operating Ambient Temperature Storage Temperature Symbol VCC ICC PD Topr Tstg Rating 6 40 240 30 ~ +85 55 ~ +125 Unit V mA mW C C

    AN8806SB
    I Recommended Operating Range (Ta=25C)
    Parameter Operating Supply Voltage Range Symbol VCC

    ICs for CD/CD-ROM Player

    Range 3.4V ~ 5.5V

    I Electrical Characteristics (Ta=25C2C)


    Parameter Total Circuit Current VREF Output Voltage Focus Error Amp. Output Offset Voltage of Focus Error Amp. Crosstalk Quantity of Focus Error Offset Balance I V Conversion Gain of Focus Error Amp. I V Conversion Relative Gain of Focus Error Amp. Focus Balance Variable Range 1H Focus Balance Variable Range 1L Focus Balance Variable Range 2H Focus Balance Variable Range 2L Frequency Characteristics of Focus Error Amp. Tracking Error Amp. Output Offset Voltage of Tracking Error Amp. Crosstalk Quantity of Tracking Error Offset Balance IV Conversion Gain of Tracking Error Amp. IV Conversion Relative Gain of Tracking Error Amp. Tracking Balance Variable Range 1H Tracking Balance Variable Range 1L Tracking Balance Variable Range 2H Tracking Balance Variable Range 2L Frequency Characteristics of Tracking Error Amp. CROSS Detection CROSS Output H Level CROSS Output L Level RF-Amp. RF-Amp. Offset Voltage RF-Amp. I V Conversion Gain RF-Amp. I V Conversion Relative Gain 1 RF-Amp. Frequency Characteristics 1 Note) Note) VRFOF RRF DRRF GRF VCC=5V VCC=5V VCC=5V VCC=5V, f=500kHz, 3MHz 75 45.0 10 2.5 0 56.5 0 0 75 68.0 10 2.5 mV k % dB VFOOF VFOOFB RFO DRFO BFO1H BFO1L BFO2H BFO2L GFO VCC=5V VCC=5V, VFB=VREF 1V Applied VCC=5V, VFB=VREF VCC=5V, VFB=VREF VCC=5V, VFB=VREF +1V VCC=5V, VFB=VREF 1V VCC=5V, VFB=VREF +1V VCC=5V, VFB=VREF 1V VCC=5V, f=1kHz, 30kHz Input 250 200 65 12 0.15 1.19 1.19 0.15 4.5 93 0 0.25 1.70 1.70 0.25 3 0 250 200 121 12 0.35 2.21 2.21 0.35 1.5 dB mV mV k % Symbol Itot VREF VCC=5V VCC=5V Condition min. 10.0 2.20 typ. 14.5 2.50 max. 19.0 2.80 Unit mA V

    VTROF VTROFB RTR DRTR BTR1H BTR1L BTR2H BTR2L GTR

    VCC=5V VCC=5V, VTB=VREF1V Applied VCC=5V, VTB=VREF VCC=5V, VTB=VREF VCC=5V, VTB=VREF +1V VCC=5V, VTB=VREF 1V VCC=5V, VTB=VREF +1V VCC=5V, VTB=VREF 1V VCC=5V, f=1kHz, 46kHz

    63 200 420 15 0.185 1.20 1.20 0.175 4.5

    63 200

    mV mV k %

    600 0 0.285 1.75 1.75 0.275 3

    780 15 0.385 2.30 2.30 0.375 1.5

    dB

    VCRH VCRL

    VCC=5V, VTB=VREF, f=2kHz VCC=5V, VTB=VREF, f=2kHz

    4.2 0.8

    V V

    The value may fluctuate by the influence of printed board, socket and etc.

    ICs for CD/CD-ROM Player


    I Electrical Characteristics (Cont.) (Ta=25C2C)
    Parameter AGC AGC max. Gain EQ Characteristics AGC Operation Gain AGC Compressibility AGC Frequency Characteristics RFDET RFDET Detection Operation RFDET H Level RFDET L Level BDO BDO Detection Current BDO H Level BDO L Level OFTR OFTR Detection Current OFTR H Level OFTR L Level LD APC LD ON H Input Level LD OFF H Input Level LD ON Operation Voltage (1) LD ON Operation Voltage (2) V. Detection V. Det. Level (1) V. Det. Level (2) V. Det. H Level V. Det. L Level 3TENV CENV Detection Current CEA-ENV Transmission Characteristics CEA Input Impedance ENV Output Impedance ENV-Amp. Offset Voltage CEA-Amp. Operation Voltage ICENV GCEAENV RCEA RENV VOPENV VOPCEA VCC=5V VCC=5V VCC=5V VCC=5V VCC=5V VCC=5V 8.5 21 6.5 6.5 70 50 11 23 8.25 8.25 0 125 VDet. (1) VDet.. (2) VDet.H VDet.L VCC=5V, V23 : DC Sweep VCC=5V, V23 : DC Sweep VCC=5V, V23 : DC Sweep VCC=5V, V23 : DC Sweep 52 98 4.2 75 75 VLDONH VLDOFFH VLD (1) VLD (2) VCC=5V VCC=5V VCC=5V, V1 : DC Sweep VCC=5V, V1 : DC Sweep 3.5 3.5 0.135 0.116 0.170 0.140 IOFTR VOFTRH VOFTRL VCC=5V VCC=5V, f=2kHz Rectangle Wave VCC=5V, f=2kHz Rectangle Wave 1.0 4.2 1.4 IBDO VBDOH VBDOL VCC=5V VCC=5V, f=2kHz Rectangle Wave VCC=5V, f=2kHz Rectangle Wave 1.0 4.2 1.4 GAGC DGEQ GOPAGC GcmAGC GfAGC VNRF VNRFH VNRFL VCC=5V, f=500kHz, Sine Wave VCC=5V, f=1.5MHz, Sine Wave f=500kHz, VIN=500mVPP f=500kHz, VIN=100mVPP f=3MHz, VIN=500mVPP f=500kHz f=500kHz f=500kHz 11.0 0.2 4 2 1.5 0.067 4.2 15.5 1.0 6 6 0 0.105 Symbol Condition min. typ.

    AN8806SB

    max. 20.0 2.0 9 8 2.5 0.142 0.8 1.8 0.8 1.8 0.8

    Unit dB dB dB dB dB VPP V V A V V A V V V V

    0.205 0.164 98 52 0.8 13.5 25 9.5 9.5 70 200

    V V mV mV V V A dB k k mV mV

    AN8806SB

    ICs for CD/CD-ROM Player

    I Operational Description (The values shown below are design values when supply voltage VCC = 5V.) RFAmplifier
    As shown in Figure 1, RF signals are generated by three-beam method pick-up. Equivalent resistance to RFOUT (Pin7) is 57.6k, when resistance between RFand RFOUT is 12k.
    Light level 48k 12k

    36

    +
    48k 10k 10k 6

    RRF Dark leve 7

    A D

    B C

    35

    RRF (T) =48k

    RRF 10k Figure 1 : RF Amplifier

    Focus Error Amplifier


    As shown in Figure 2, the operation result of (A+ C) (B + D) is outputted to FEOUT (Pin27). Equivalent resistance to FEOUT is 96k, when resistance between FE and FEOUT is 20k.
    20k 48k VCBA 36 RFE A+C

    +
    48k

    28

    27

    A D

    B C

    20k

    +
    B+D 35

    +
    2 fC = 30kHz

    29 VC

    Figure 2 : Focus Error Amplifier

    ICs for CD/CD-ROM Player

    AN8806SB

    The VCBA is for focus balance adjustment. Connecting 47 k of external resistance to Pin29, signal ratio between A + C and B + D can be controlled as shown in Table 1. Table 1 VC 1.5V 2.5V 3.5V A+C B+D 0.14 1.0 7.0 B+D A+C 7.0 1.0 0.14

    Tracking Error Amplifier


    As shown in Figure 3, the tracking error amplifier receives the output currents E and F of three-beam method pin photo diode for sub-beam detection, and outputs the operation result of E F to TEOUT (Pin25).

    VREF

    32 470k fC646kHz

    20k E 33

    VCBA

    +
    Subtraction VREF 31 470k 26

    25

    34

    VCBA

    20k

    30

    Figure 3 : Tracking Error Amplifier

    AN8806SB

    ICs for CD/CD-ROM Player

    Pins31 and 32 are used to make the resistance converting the current to voltage variable. When these pins are directly connected toVREF and 20k of resistance is connected between TE and TE, and between TE and TEOUT respectively, equivalent resistance to TEOUT is 629k. Table 2 VC 1.5V 2.5V 3.5V E/F 0.14 1.0 7.0 F/E 7.0 1.0 0.14

    The VCBA is for tracking balance adjustment in the same way of for focus. Table 2 shows the tracking balance ratio under the same conditions as shown in Table 1.

    AGC
    In order to absorb the attenuation of RF signal by disk, pick-up dispersion, finger print and other factors, AGC circuit for RF is incorporated. The input impedance of Pin8 is approx. 27.9k. By Pin10 (ARF), the gain-controlled RF-signal is outputted. Input allowable level is approx. 1VPP ~ 500mVPP ~ 250mVPP, and output is 1VPP. Pin9 is a connecting pin with capacity for constructing the AGC loop filter, and it is recommended that the external capacitor of 1F around should be connected to it for VCC.

    RF

    VCC

    1F ARF 8 9 10

    EQ

    AGC

    Figure 4 : AGC

    RFDET
    The RFDET detects amplitude of RF signal inputted to Pin8. Threshold value is approx. 100mV (f=500kHz), and RF Present=L, RF Absent=H are outputted.

    ICs for CD/CD-ROM Player

    AN8806SB

    BDO Detection
    BDO is detected by the low speed detection circuit and high speed detection circuit. The high speed detection circuit is incorporated. On the other hand, the capacitor of the low speed detection circuit must be connected to Pin13. The capacity value is 2200pF and it is recommended that it should be connected for VCC. When this capacity value of Pin13 is increased, BDO is detected with large RF missing rate. When it is decreased, BDO can be detected with small RF missing rate. BDO present = H BDO absent = L

    OFTR Detection
    OFTR detection reversely corresponds with BDO detection. However, its detection method is the same as for BDO. Capacitor for the low speed detection must be connected to Pin15. It is recommended that it should be connected to VCC at 2200pF in the same way as for Pin13. The relation between the capacity value and OFTR detection timing is as the same for BDO. OFTR = H Off from OFTR = L

    APC
    VCC LD OFF 21 10F

    10

    2 LD

    1 PD

    4 LDP

    3 LD ON/OFF

    Figure 5 : APC

    By connecting Pin4 to OPEN or GND, the reference voltage of LD can be switched. Connection to OPEN makes the reference voltage approx. 170mV and connection to GND makes it approx. 140mV.

    Reference Supply
    Servo reference supply is incorporated. Pin20 outputs VCC/2, and has approx. 3mA of current capacity for sink/source. It is recommended that it should be given 1F to 10F of capacity in addition.

    Vibration Detection
    The AN8806SB has a wind comparator of approx. 75mV. Abnormal vibration components of tracking error are detected and the data for whether vibration is present or not is outputted to Pin22.

    AN8806SB
    Envelope Detection

    ICs for CD/CD-ROM Player

    The envelope detection circuit extracts fluctuation of RF signal required for adjustment of focus balance. Pin11 and 12 are connecting pins with capacity for constructing the filter. It is recommended that for Pin11, a capacitor of 100 pF around, and for Pin12 , an external capacitor of 0.027F around should be connected against VCC. Pin19 is for output and must have external capacity for constructing the filter, and it is recommended that an external capacitor of 0.027F around should be connected to it for VREF.

    CENV 11

    CEA 12

    ENV 19

    AGC

    ENV Detection

    Figure 6 : Envelope Detection

    You might also like