Capacitors

Vol.
14
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9653TCAVOL14E1109E0
Correct Use of Tantalum Chip Capacitors

Be sure to read these following Notes before using NEC TOKIN Tantalum Capacitors.
[Notes]
bBe sure to read "Notes on Using The Solid Tantalum Capacitor" (p45 - p53) and "Cautions" (p55) before commencing circuit design or using the capacitor. bConrm the usage conditions and rated performance of the capacitor before use. bNinety percent of the failure that occurs in this capacitor is caused by an increase in leakage current or short-circuiting. Therefore its important to make sufcient allowances for redundant wiring in the circuit design.
[Quality Grades]
NEC TOKIN devices are classied into the following quality grades in accordance with their application (for details of the applications, see p51). The quality grade of all devices in this document is "standard"; the devices in this document cannot be used for "special" or "specic" quality grade applications. Customers who intend to use a product or products in this document for applications other than those specied under the "standard" quality grade must contact NEC TOKIN sales representative in advance (see the reverse side of the cover for contact details). bStandard: This quality grade is intended for applications in which failure or malfunction of the device is highly unlikely to cause harm to persons or damage to property, or be the source of any negative effects or problems in the wider community. bSpecial: This quality grade is intended for special applications that have common requirements, such specic industrial elds. Devices with a "special" quality grade are designed, manufactured, and tested using a more stringent quality assurance program than that used for "standard" grade devices. There is a high possibility that failure or malfunction of the device when being used for applications in this category will cause harm to persons or damage to property, or create negative effects or problems in the wider community. bSpecic: Devices with a "specic" quality grade are designed, manufactured, and tested using a quality assurance program that is designated by the customer or that is created in accordance with the customer's specications. There is an extremely high possibility that failure or malfunction of the device when being used for applications in this category will cause harm to persons or damage to property, or create serious problems in the wider community. Customers who use NEC TOKIN's products for these "specic" applications must conclude an individual quality agreement and/or development agreement with NEC TOKIN. A quality assurance program designated by the customer must also be determined in advance.
9653TCAVOL14E1109E0
NEC TOKIN offers the latest technology

<Tantalum Capacitors> <Conductive Polymer Tantalum Capacitors> NeoCapacitors
NEC has been manufacturing solid electrolyte tantalum capacitors for more than 30 years. As a result of NECs
active research and development programs, NEC capacitors offer the designer the latest technology plus outstanding performance. NEC capacitors are used extensively in industrial, commercial, entertainment, and medical electronic equipment. NEC has obtained ISO 14001 and ISO 9001 certificates of registration for capacitors. NEC, in response to the wave of the worldwide environment protection consciousness, developed E/SV series by eliminating lead from the terminals.
The low-ESR conductive polymer tantalum capacitors are expected to meet an important market need; they
are suited for DC/DC converters, video cameras, personal handy phones, etc. The business of manufacturing and sale of capacitors was divided and transfered to Tokin, as of April 1, 2002. Then Tokin changed its corporate name to NEC TOKIN Corporation, which has charge of electronic components business within the NEC Group.
TABLE OF CONTENTS
Tantalum Capacitors .................................................................................................................. 4 Conductive Polymer Type (NeoCapacitor) What is NeoCapacitor ........................................................................................................ 5 PS/G Series NeoCapacitor ................................................................................................ 6 PS/L Series NeoCapacitor .................................................................................................10 F/PS Series NeoCapacitor .................................................................................................18 G/PS Series NeoCapacitor ............................................................................................... 22 Manganese Dioxide Type F/SV Series Tantalum Chip Capacitors ............................................................................. 26
E/SV Series Tantalum Chip Capacitors .............................................................................30 SV/Z Series Tantalum Chip Capacitors ..............................................................................38 Tape and Reel Specications ............................................................................................43 Notes on Using the Solid Tantalum Capacitors .................................................................45 Notes on Using the Chip Tantalum Capacitors, excluding NeoCapacitors ........................48 Notes on Using NeoCapacitors......................................................................................... 51
Environmental Conformance ......................................................................................................54 3
9653TCAVOL14E1109E0
TANTALUM CAPACITORS
Description
NEC TOKINs tantulum capacitors offer the designer advanced technological design and excellent performance A process used to further improve the reliability of tantalums is to burn them in at elevated voltages at 85C for
characteristics for ltering, bypassing, coupling, decoupling, blocking, and R C timing circuits. They are used extensively in industrial, commercial, entertainment, and medical electronic equipment. The tantalum capacitor is inherently very reliable and there is signicant evidence that this reliability improves with ageperhaps indenitely. Capacitance loss with age and other problems often associated with liquid electrolytes are nonexistent in solid electrolyte tantalums.
extended periods of time, thus eliminating high leakage and other undesirable characteristics. This process is done because solid electrolyte tantalum capacitors do not conform to the exponential distribution of time ordered failures, but instead exhibit a constantly decreasing failure rate. If you specify NEC TOKIN tantalums, you can feel con-
dent that you are getting the best available quality, reliability, and price.
TANTALUM CHIP CAPACITORS

NeoCapacitor (Conductive Polymer Type) Series Operating Temperature Range (C) DC Rated Voltage Range (V) Capacitance Range ( F) Capacitance Tolerance (%) DC Leakage Current ( A) 0.1 CV(1) or 3, whichever is greater 0.1 CV(1) or 3, (J case:10) whichever is greater 0.1 CV(1) or 3, whichever is greater 0.1 CV(1) or 3, whichever is greater Lead-free/Conform to RoHS Dissipation Factor (%) Features
PS/G
55 to +105
2.5 and 4
220 to 680
20
8 to 10
Ultra-low ESR (Single digit ESR)
PS/L
55 to +105
2.5 to 25
2.2 to 1000
20
4 to 10 (2)
Ultra-low ESR Face down terminal Ultra miniaturized Large Capacitance Substrate terminal Ultra miniaturized Much Larger Capacitance
F/PS
55 to +105
4 to 10
22 to 100
20
6 to 8
G/PS
55 to +105
6.3 and 10
22 and 47
20
Conventional Type (Manganese Dioxide Type) F/SV 55 to +125 2.5 to 25 6.8 to 220 20 0.01 CV or 0.5 whichever is greater
(1)
Lead-free/Conform to RoHS 8 to 35 2.5 Vdc to 10 Vdc (3) : 8 to 35 16 Vdc to 35 Vdc : 4 to 20 6 to 14 (4) Face down terminal Ultra miniaturized Large Capacitance Standard Miniaturized Ultra miniaturized Low ESR
E/SV
55 to +125
2.5 to 35
0.47 to 680
20 or 10 (P, J case;20)
0.01 CV(1) or 0.5 whichever is greater 0.01 CV(1) or 0.5 whichever is greater
SV/Z
55 to +125
4 to 35
6.8 to 330
20 or 10
Notes
1. 2. 3. 4.
Product of capacitance in F and voltage in V. Refer to Standard Ratings on page 14. Refer to Standard Ratings on page 34. Refer to Standard Ratings on page 42.
9653TCAVOL14E1109E0
What is
Lead-free / RoHS Compliant
Conductive Polymer Capacitor
capacitor. It features high permissible ripple current and effective noise reduction in a high frequency application with its
ultra low ESR (equivalent series resistance). NeoCapacitor is manufactured in the factories certied by the International standards, the ISO9001 and the
ISO 14001. RoHs Compliant Lead-free plating.In addition, Halogen free, Antimony free and Red Phosphorous free resin is applied to the exterior mold resin.
(S m1)
104
Conductive polymer TCNQ (organic semiconductor) Manganese dioxide (MnO 2) Electrolyte
Conductance
103 102 10
1
Anode (tantalum) Dielectric (tantalum oxide)
Conductive glue Silver paste Graphite layer Conductive polymer
NeoCapacitor's Structure
Features
Rich product line-up Small size (the same as conventional chip) Ultra Low ESR/low impedance Suitability for surface mounting High permissible ripple current Lead-free Type/RoHs Compliant Self healing phenomenon when failed
Applications
DC / DC converter Regulator DVC, DSC Portable Audio, DVD player, BD player Mobile phone, Smart phone Game machine Note PC
Conductive polymer used for electrolyte is superior in insulating the damaged portion in comparison with the manganese oxide (used in conventional tantalum capacitor)
9653TCAVOL14E1109E0
Conductive Polymer type
NeoCapacitor has the same structure as a conventional chip tantalum capacitor. It has a low-resistance cathode of conductive polymer as a substitute for manganese dioxide of a conventional
PS/G
FEATURE DIMENSIONS
Series
Single Digit ESR / RoHS Compliant
bLead-free type. RoHS Compliant. bExtreme low ESR (6mhom) and excellent noise absorption performance.
bHigh capacitance and ultra low ESR based upon on our original Conductive Polymer technology. bSame outer dimension an conventional PS/L series.
bHalogen free, Antimony free and Red Phosphorous free resin is applied to the exterior mold resin.
[B2 Case]
Z
L H Z
W1
W2
[V, D Case]
Z
L H Z W2
W1
Case Code B2 V D
(Unit: mm)
L 3.5 0.2 7.3 0.2 7.3 0.2
H 1.9 0.1 1.9 0.1 2.8 0.2
Z 0.8 0.2 1.3 0.2 1.3 0.2
2.8 0.2 4.3 0.2 4.3 0.2
2.2 0.1 2.4 0.2 2.4 0.2
STANDARD C-V VALUE REFERENCE BY CASE CODE

UR
220 330 470 680 227 337 477 687 B2 9
*Numeral: ESR(m)
2.5 0E V 9, 7 V D 9, 6 9, 7 D V 9, 6 9, 7, 6 D 9, 7, 6
UR :Rated Voltage
4 0G V 9
9653TCAVOL14E1109E0
PS/G Series
PART NUMBER SYSTEM

[Bulk]
PSG D 0E 477 M 7 Special Numbering for ESR ex.7 means 7 m .
[Tape and Reel]

TE PSGD0E477M7 -12 R
Capacitance Tolerance M: 20% Capacitance (in pF) First two digits represent significant figures. Third digit specifies number of zero to follow.
Tape width -12: 12 mm Part number of Bulk Tape and Reel TE:180mm reel TL PSGD0E477M7 -12 R E Indicate 330mm reel Tape and Reel TL:330mm reel
DC Rated Voltage in volts Case code PS/G Series
MARKINGS
B2 case
[Rated voltage and capacitance]

Production Date Code NE for NeoCapacitor Marking Code (DC Rated Voltage and Capacitance) Polarity + F UR J8 N8 S8 W8 2.5 e
UR :Rated Voltage
NE R eN8
4 g
220 470
eJ8 eN8 eS8 eW8
gJ8
330 680
[Production date code]

Y M
V, D case
Polarity Stripe +
Jan. Feb. Mar. Apr. May. Jun. Jul. Aug. Sep. Oct. Nov. Dec.
2011 2012 2013 2014
a n A N
b p B P
c q C Q
d r D R
e s E S
f t F T
g u G U
h v H V
j w J W
k x K X
l y L Y
m z M Z
NE F eS8
Production Date Code NE for NeoCapacitor Marking Code (DC Rated Voltage and Capacitance)
NOTE: Production date code will resume beginning in 2015.
9653TCAVOL14E1109E0
Packing Orientation R: Cathode on the side of Sproket Hole
PS/G Series
PERFORMANCE CHARACTERISTICS
ITEM Operating temperature Rated voltage (V.dc) Derated voltage (V.dc) Surge voltage (V.dc) Capacitance Capacitance tolerance DC Leakage Current (L.C) Dissipation Factor Equivalent Series Resistance Capacitance change 2.5V 2V 3.3V
Test Conditions : Conform to IEC 60384-1
PERFORMANCE -55 to +105 4V 3.3V 5.2V 220 F to 680 F 20% at 85
TEST CONDITION Derated voltage at 85 at more at 105 at 85 at 120 Hz Voltage: Rated voltage for 5min. at 120 Hz at 100 kHz or 300 kHz refer to STANDARD RATINGS L.C Lower than initial specification Lower than 10 times initial specification Temperature : 852 Applied voltage : Surge voltage Series resistance : 33 ohm Duration of surge : 305 sec Time between surge : 5.5min. Number of cycle : 1000
0.1C V(A) or 3A, whichever is greater Refer to Standard Ratings Refer to Standard Ratings DF(%) Lower than initial specification Lower than initial specification
Surge voltage test
Refer to Standard Ratings
Characteristic at high and low temperature
-55 +105
from 0 to -20% from 0 to +50%
Lower than 1.5 times initial specification
Step 1: 252 0 Step 2: -55 -3 Step 3: 252 0 Step 4: 105 -3
Rapid change of temperature
Lower than initial specification
Resistance to Soldering heat Damp heat
Refer to Standard Ratings from +30% to -20%
Lower than 1.3 times initial specification Lower than 1.5 times initial specification Lower than 1.5 times initial specification Lower than 3 times initial specification 0 = 1% / 1000 hour
Lower than initial specification Lower than initial specification Lower than initial specification Lower than initial specification
Parts shall be temperature cycled over a temperature range of -55 to +105, five times continuously as follow. 0 Step 1: -55 -3 , 303min. Step 2: room temp. , 10 to 15min. 0 Step 3: 105 -3 , 303min. Step 4: room temp, 10 to 15min.
Reflow soldering mehod 240, *1 10 sec.Max. at 40 at 90 to 95% RH 500 hour at 85 at rated voltage 1000 hour
Endurance I Endurance II
Refer to Standard Ratings Refer to Standard Ratings
at 105 at Derated voltage 1000 hour at 85: rated voltage at 105: derated voltage 1000 hour Strength : 4.9N Time : 100.5sec. (two directions) at 100 kHz or 300 kHz refer to STANDARD RATINGS Conform to IEC60384-1
Failure Rate Terminal Strength Permissible ripple current Others
Visual: There shall be no evidence of mechanical damage Refer to Ratings Table Conform to IEC60384-1
*1: Refer to the page 52 NOTES ON USING NeoCapacitor/2. Mounting/(1) Reow soldering/(b) Temperature and time
Reference : Derated voltage (85 to 105C) [UT] = [UR] (T85) 20 [UT] : Derated voltage at operating temperature [UR] : Rated voltage [UC] : Derated voltage at 105C T : Operating temperature [UR] [UC]
9653TCAVOL14E1109E0
PS/G Series
STANDARD RATINGS
Rated Capacitance Case Voltage Code ( F) (V) 330 220 220 330 330 330 330 470 470 470 470 470 680 680 680 220 B2 V V V V D D V V D D D D D D V Part Number (Bulk) PSGB20E337M9 PSGV0E227M9 PSGV0E227M7 PSGV0E337M9 PSGV0E337M6 PSGD0E337M9 PSGD0E337M7 PSGV0E477M9 PSGV0E477M6 PSGD0E477M9 PSGD0E477M7 PSGD0E477M6 PSGD0E687M9 PSGD0E687M7 PSGD0E687M6 PSGV0G227M9 Leakage Current ( A) Max 82.5 55 55 82.5 82.5 82.5 82.5 117.5 117.5 117.5 117.5 117.5 170 170 170 88 DF (%) Max 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Capacitance Change ESR Permissible DF (%) Max Ripple (m ) at Surge Voltage Current Max (mA rms.) -55 +105 at Resistance to at Endurance Soldering Heat *1 Max *1 9b 3073 b 8 12 20% 20% 9b 3726 b 10 15 20% 20% 7b 4226 b 10 15 20% 20% 9b 3726 b 10 15 20% 20% 6b 4564 b 10 15 20% 20% 9 4082 10 15 20% 20% 7 4629 10 15 20% 20% 9b 3726 b 10 15 20% 20% 6b 4564 b 10 15 20% 20% 9 4082 10 15 20% 20% 7 4629 10 15 20% 20% 6 5000 10 15 20% 20% 9 4082 10 15 20% 20% 7 4629 10 15 20% 20% 6 5000 10 15 20% 20% 9b 3726 b 10 15 20% 20%
2.5
*1: Measure frequency : 300kHz, none: 100 kHz
FREQUENCY CHARACTERISTICS (reference)

10
Impedance-frequency characteristics
Impedance ()
100m
PSGD0E477M7
10m
1m 100
1k
10k
100k
1M
10M
100M
Frequency (Hz)
10
ESR-frequency characteristics
ESR()
100m
10m
PSGD0G477M7
1m 100
1k
10k
100k
1M
10M
100M
Frequency (Hz)
9653TCAVOL14E1109E0
PS/L
FEATURES DIMENSIONS [mm]
Series
Ultra Low ESR / RoHS Compliant
bLead-free Type. RoHS Compliant. bUltra-Low ESR.
bSame Dimension as E/SV series. bHalogen free, Antimony free and Red Phosphorous free resin is applied to the exterior mold resin.
[J, P, A2, A cases]

Z
L H Z W2
W1
[B3, B15, B2 cases]
L H Z Z W2
W1
W1 H
[C2, C, V, D cases]
Z W2
(Unit: mm)
Case code
J P A2(U) A B3(W) B15 B2(S) C2 C V D
EIA code
2012 3216L 3216 3528L 3528 6032 7343L 7343
L
1.6 0.1 2.0 0.2 3.2 0.2 3.2 0.2 3.5 0.2 3.5 0.2 3.5 0.2 6.0 0.2 6.0 0.2 7.3 0.2 7.3 0.2
W1
0.8 0.1 1.25 0.2 1.6 0.2 1.6 0.2 2.8 0.2 2.8 0.2 2.8 0.2 3.2 0.2 3.2 0.2 4.3 0.2 4.3 0.2
W2
0.6 0.1 0.9 0.1 1.2 0.1 1.2 0.1 2.2 0.1 2.2 0.1 2.2 0.1 2.2 0.1 2.2 0.1 2.4 0.1 2.4 0.1
H
0.8 0.1 1.1 0.1 1.1 0.1 1.6 0.2 1.1 0.1 1.4 0.1 1.9 0.1 1.4 0.1 2.5 0.2 1.9 0.1 2.8 0.2
Z
0.3 0.15 0.5 0.1 0.8 0.2 0.8 0.2 0.8 0.2 0.8 0.2 0.8 0.2 1.3 0.2 1.3 0.2 1.3 0.2 1.3 0.2
10
9653TCAVOL14E1109E0
PS/L Series

F 1.0 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 680 1000 UR 105 225 335 475 685 106 156 226 336 476 686 107 157 227 337 477 687 108 A, B2 B2, C, V V D D A, B3 P A2 A2 P, A2, B2 A2, A A, B3 A, C2, C A, B3, B2, C2 B2, C B2, C, V, D C, V, D D D J, P, A J J, P J, P J, P, A P, A2, A A2, A, B2 A2, A, B3, B2 A, B3, B2 B3, B2, C2, C A, B2, C2, C, V B15, B2, C2, C, V, D B2, V, D V, D J J, A J, A2, A A2, A, B2 P, A2, A, B2 A, B2, C A, B3, B2, C A, B3, B2, C2, C C2, C, V, D B2, C2, C, V, D C, V, D D V V, D V, D V V V, D A B2 B2 B2 2.5 V 0E 4V 0G 6.3V 0J 10V 1A 16V 1C 20V 1D
UR :Rated Voltage
25V 1E
B2 V V D
A, B3, B2, C2, C B3, B2, C2, C, V, D
PART NUMBER SYSTEM

[Bulk]
PSL D 0J 337 M (25) Special numbering for ESR ex. (25) shows 25 m Capacitance Tolerance M: 20% Capacitance (pF) First two digits represent significant figures. Third digit specifies number of zeros to follow.
[Tape and Reel]

TE PSLD0J337M 12 R Packing Orientation R: Cathode on the Side of Sproket Hole 8 : 8 mm (J, P, A2, A, B3, B15, B2 case) 12 : 12 mm (C2, C, V, D cases) Tape width
Part number of Bulk Tape and Reel TE: 180mm reel TL PSLD0J337M 12 R E Tape and Reel TL: 330mm reel
DC rated voltage in volts 0E: 2.5 V, 0G : 4 V, 0J : 6.3 V, 1A : 10 V, 1C: 16 V, 1D : 20 V, 1E : 25 V Case code PS/L Series
Indicates 330mm reel
11
9653TCAVOL14E1109E0
PS/L Series
[J case] (ex. 4.7 F / 6.3 V)
[J case Marking Code]

F UR
2.2 3.3 4.7 6.8 10 G 4V 6.3V J
UR :Rated Voltage 10V A A A 10V 16V AA 16V CN6 CS6 CW6 CA7 EE7 DJ7 CN7 CS7 CW7 DN7 DS7 EJ7 EN7 EW6 C 20V D 25V E
J
Marking Code (DC Rated Voltage and Capacitance) Polarity [P case] (ex. 10 F / 4 V)
[P case Marking Code]

F UR
1.0 2.2 3.3 4.7 6.8 10 15 22 Je 2.5V 4V 6.3V
AG
Marking Code (DC Rated Voltage and Capacitance) Polarity [A2, A cases] (ex. 10 F / 6.3 V)
NJ SJ WJ AG JG AJ
[A2, A, B3, B15, B2, C2, C, V, D cases Marking Code]

F UR
2.5V e 4V 6.3V j 10V AN6 AS6 jW6 gA7 gJ7 eN7 eS7 eA8 eJ8 eN8 eS8 eW8 eA9 gN7 gS7 gW7 gA8 gE8 gJ8 gN8 gS8 gW8 jA7 jE7 jJ7 jN7 jS7 jW7 jA8 jE8 jJ8 jN8 AW6 AA7 AE7 AJ7 AN7 AS7 AW7 AA8 AE8 AJ8 A
FjA7
Marking Code (DC Rated Voltage and Capacitance) Production Date Code Polarity [B3, B15, B2 cases] (ex. 15 F / 6.3 V)
3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 680 1000
N6 S6 W6 A7 E7 J7 N7 S7 W7 A8 E8 J8 N8 S8 W8 A9
NE R jE7
Polarity
[C2, C, V, D cases] (ex. 150 F / 6.3 V) Polarity
NE R jE8
[A2, A, B3, B15, B2, C2, C, V, D cases production date code]

Y M
2011 2012 2013 2014
a n A N
b p B P
c q C Q
d r D R
e s E S
f t F T
g u G U
J J J
h v H V
j w J W
k x K X
l y L Y
m z M Z
12
9653TCAVOL14E1109E0
PS/L Series
ITEM Operating temperature Rated voltage (V.dc) Derated voltage (V.dc) Surge voltage (V.dc) Capacitance Capacitance tolerance DC Leakage Current (L.C) Dissipation Factor Equivalent Series Resistance Capacitance change 2.5V 2V 3.3V 4V 3.3V 5.2V 6.3V 5V 8V PERFORMANCE 55 to +105 10V 8V 13V 2.2 F to 1000 F 20% 0.1C V(A) or 3A (J case:10A) , whichever is greater Refer to Standard Ratings Refer to Standard Ratings DF(%) Lower than initial specification Lower than initial specification L.C Lower than initial specification 16V 12.8V 20V 20V 16V 23V
TEST CONDITION
25V 20V 29V
at 85 at 105 Rated voltage 2.5 to 16V: at 85 Rated voltage over 20V: at 15 to 35 at 120 Hz Voltage: Rated voltage for 5min. at 120 Hz at 100 kHz or 300 kHz refer to STANDARD RATINGS Temperature : 852 Applied voltage : Surge voltage Series resistance : 33 ohm Duration of surge : 305 sec Time between surge : 5.5min. Number of cycle : 1000 Step 1: 252 0 Step 2: 553 Step 3: 252 0 Step 4: 105 3
Surge voltage test
55 +105
from 0 to 20% from 0 to +50%
Lower than 10 times initial specification
Lower than 1.5 times initial specification
Refer to Standard Ratings from +30% to 20%
Lower than 1.3 times initial specification Lower than 1.5 times initial specification
Parts shall be temperature cycled over a temperature range of 55 to +105, five times continuously as follow. 0 Step 1: 55 3 , 303min. Step 2: room temp. , 10 to 15min. 0 Step 3: 105 3 , 303min. Step 4: room temp, 10 to 15min. Reflow soldering method 240, 10 sec.Max. *1
at 40 at 90 to 95% RH 500 hour at 85 at rated voltage 1000 hour at 105 at Derated voltage 1000 hour at 85: rated voltage at 105: derated voltage 1000 hour Strength : 4.9N Time : 100.5sec. (two directions) at 100 kHz or 300 kHz refer to STANDARD RATINGS Conform to IEC603841
Endurance I Endurance II Failure Rate Terminal Strength Permissible ripple current Others
Refer to Standard Ratings Lower than 1.5 times initial specification Refer to Standard Ratings Lower than 3 times initial specification 0 = 1% / 1000 hour Visual: There shall be no evidence of mechanical damage Refer to Ratings Table Conform to IEC603841
Reference : Derated voltage (85 to 105C) [UR] [UC] [UT] = [UR] (T85) 20 [UT] : Derated voltage at operating temperature [UR] : Rated voltage [UC] : Derated voltage at 105C T : Operating temperature
13
9653TCAVOL14E1109E0
Derated voltage at 85 at more
PS/L Series
STANDARD RATINGS
Rated Capacitance Case Voltage Code ( F) (V) 22 33 47 100 100 100 100 220 220 220 220 220 220 220 220 330 330 330 330 330 330 330 330 330 330 330 470 470 680 680 680 1000 1000 10 10 10 22 22 22 33 33 47 47 68 68 68 100 100 100 100 100 100 100 100 100 150 150 150 150 220 220 220 220 P A2 A2 A A A B3 A A A B2 B2 B2 B2 B2 B2 B2 B2 B2 C C C C V V V V V D D D D D J P A P A2 B2 A2 A A B3 A C2 C A A A A B3 B2 B2 B2 C2 B2 B2 B2 C B2 B2 B2 B2 Part Number (Bulk) PSLP0E226M PSLA20E336M PSLA20E476M PSLA0E107M PSLA0E107M(45) PSLA0E107M(35) PSLB30E107M PSLA0E227M(45) PSLA0E227M(35) PSLA0E227M(25) PSLB20E227M PSLB20E227M(35) PSLB20E227M(25) PSLB20E227M(21) PSLB20E227M(15) PSLB20E337M PSLB20E337M(35) PSLB20E337M(21) PSLB20E337M(15) PSLC0E337M PSLC0E337M(45) PSLC0E337M(25) PSLC0E337M(18) PSLV0E337M PSLV0E337M(15) PSLV0E337M(12) PSLV0E477M(15) PSLV0E477M(12) PSLD0E687M PSLD0E687M(15) PSLD0E687M(12) PSLD0E108M PSLD0E108M(15) PSLJ0G106M PSLP0G106M PSLA0G106M PSLP0G226M PSLA20G226M PSLB20G226M PSLA20G336M PSLA0G336M PSLA0G476M PSLB30G476M PSLA0G686M PSLC20G686M PSLC0G686M PSLA0G107M PSLA0G107M(45) PSLA0G107M(35) PSLA0G107M(25) PSLB30G107M PSLB20G107M PSLB20G107M(45) PSLB20G107M(35) PSLC20G107M PSLB20G157M PSLB20G157M(35) PSLB20G157M(25) PSLC0G157M PSLB20G227M PSLB20G227M(35) PSLB20G227M(25) PSLB20G227M(15) Leakage Current ( A) Max 5.5 8.3 11.7 25 25 25 25 55 55 55 55 55 55 55 55 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 117.5 117.5 170 170 170 250 250 10 4 4 8.8 8.8 8.8 13.2 13.2 18.8 18.8 27.2 27.2 27.2 40 40 40 40 40 40 40 40 40 60 60 60 60 88 88 88 88 DF (%) Max 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 4 6 6 6 6 8 6 6 6 8 6 8 9 8 8 8 8 8 8 8 8 9 8 8 8 9 8 8 8 8 ESR Permissible DF (%) Max Capacitance Change Ripple (m) at Surge Voltage Current Max (mA rms.) -55 +105 at Resistance to at Endurance Soldering Heat *1 Max *1 200 354 6 9 20% 20% 150 632 6 9 20% 20% 150 632 6 9 20% 20% 100 866 8 12 20% 20% 45 1291 8 12 20% 20% 35 1464 8 12 20% 20% 70 1035 8 12 20% 20% 45 b 1291 b 8 12 20% 20% 35 b 1464 b 8 12 20% 20% 25 1732 8 12 20% 20% 45 1374 8 12 20% 20% 35 1558 8 12 20% 20% 25 1844 8 12 20% 20% 21 2012 8 12 20% 20% 15 b 2380 b 8 12 20% 20% 45 1374 8 12 20% 20% 35 1558 8 12 20% 20% 21 2012 8 12 20% 20% 15 b 2380 b 8 12 20% 20% 55 1414 10 15 20% 20% 45 1563 10 15 20% 20% 25 2098 10 15 20% 20% 18 2472 10 15 20% 20% 25 2236 10 15 20% 20% 15 2887 10 15 20% 20% 12 3227 10 15 20% 20% 15 2887 10 15 20% 20% 12 3227 10 15 20% 20% 25 2449 10 15 20% 20% 15 3162 10 15 20% 20% 12 3536 10 15 20% 20% 25 2449 10 15 20% 20% 15 3162 10 15 20% 20% 300 183 4 6 20% 20% 200 354 6 9 20% 20% 200 612 6 9 20% 20% 200 354 6 9 20% 20% 200 548 6 9 20% 20% 150 753 8 12 20% 20% 150 632 6 9 20% 20% 180 645 6 9 20% 20% 180 645 6 9 20% 20% 70 1035 8 12 20% 20% 180 645 6 9 20% 20% 55 1279 8 12 20% 20% 100 1049 9 14 20% 20% 100 866 8 12 20% 20% 45 1291 8 12 20% 20% 35 1464 8 12 20% 20% 25 1732 8 12 20% 20% 70 1035 8 12 20% 20% 70 1102 8 12 20% 20% 45 1374 8 12 20% 20% 35 1558 8 12 20% 20% 55 1279 9 14 20% 20% 45 1374 8 12 20% 20% 35 1558 8 12 20% 20% 25 1844 8 12 20% 20% 100 1049 9 14 20% 20% 45 1374 8 12 20% 20% 35 1558 8 12 20% 20% 25 1844 8 12 20% 20% 15 2380 8 12 20% 20%
2.5
14
9653TCAVOL14E1109E0
PS/L Series
6.3
220 220 220 220 220 220 220 220 220 220 220 220 220 220 330 330 330 330 330 330 330 330 330 470 470 470 470 470 680 680 680 2.2 3.3 3.3 4.7 4.7 6.8 6.8 6.8 10 10 10 15 15 15 22 22 22 22 33 33 33 47 47 47 47 47 47 47 47 68 68 68
C C C C V V V V V D D D D D C C V V V V D D D D D D D D D D D J J P J P J P A P A2 A A2 A B2 A2 A B3 B2 A B3 B2 A A B3 B3 B2 B2 C2 C B3 B2 B2
PSLC0G227M PSLC0G227M(45) PSLC0G227M(25) PSLC0G227M(18) PSLV0G227M PSLV0G227M(25) PSLV0G227M(18) PSLV0G227M(15) PSLV0G227M(12) PSLD0G227M PSLD0G227M(40) PSLD0G227M(25) PSLD0G227M(15) PSLD0G227M(12) PSLC0G337M PSLC0G337M(25) PSLV0G337M PSLV0G337M(25) PSLV0G337M(15) PSLV0G337M(12) PSLD0G337M PSLD0G337M(25) PSLD0G337M(15) PSLD0G477M PSLD0G477M(18) PSLD0G477M(15) PSLD0G477M(12) PSLD0G477M(10) PSLD0G687M PSLD0G687M(15) PSLD0G687M(12) PSLJ0J225M PSLJ0J335M PSLP0J335M PSLJ0J475M PSLP0J475M PSLJ0J685M PSLP0J685M PSLA0J685M PSLP0J106M PSLA20J106M PSLA0J106M PSLA20J156M PSLA0J156M PSLB20J156M PSLA20J226M PSLA0J226M PSLB30J226M PSLB20J226M PSLA0J336M PSLB30J336M PSLB20J336M PSLA0J476M PSLA0J476M(70) PSLB30J476M PSLB30J476M(55) PSLB20J476M PSLB20J476M(70) PSLC20J476M PSLC0J476M PSLB30J686M PSLB20J686M PSLB20J686M(55)
9 9 9 9 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 4 4 6 4 6 6 6 6 6 6 6 6 6 8 6 6 8 8 6 8 8 6 6 8 8 8 8 9 9 8 8 8
15
9653TCAVOL14E1109E0
Rated Capacitance Case Voltage Code ( F) (V)
Part Number (Bulk)
Leakage Current ( A) Max 88 88 88 88 88 88 88 88 88 88 88 88 88 88 132 132 132 132 132 132 132 132 132 188 188 188 188 188 272 272 272 10 10 3 10 3 10 4.2 4.2 6.3 6.3 6.3 9.4 9.4 9.4 13.8 13.8 13.8 13.8 20.7 20.7 20.7 29.6 29.6 29.6 29.6 29.6 29.6 29.6 29.6 42.8 42.8 42.8
DF (%) Max
ESR Permissible DF (%) Max Capacitance Change Ripple (m) at Surge Voltage Current Max (mA rms.) -55 +105 at Resistance to at Endurance Soldering Heat *1 55 1414 9 14 20% 20% 45 1563 9 14 20% 20% 25 2098 9 14 20% 20% 18 2472 9 14 20% 20% 45 1667 10 15 20% 20% 25 2236 10 15 20% 20% 18 2635 10 15 20% 20% 15 2887 10 15 20% 20% 12 3227 10 15 20% 20% 55 1651 10 15 20% 20% 40 1936 10 15 20% 20% 25 2449 10 15 20% 20% 15 3162 10 15 20% 20% 12 3536 10 15 20% 20% 55 1414 10 15 20% 20% 25 2098 10 15 20% 20% 45 1667 10 15 20% 20% 25 2236 10 15 20% 20% 15 2887 10 15 20% 20% 12 3227 10 15 20% 20% 40 1936 10 15 20% 20% 25 2449 10 15 20% 20% 15 3162 10 15 20% 20% 25 2449 10 15 20% 20% 18 2887 10 15 20% 20% 15 3162 10 15 20% 20% 12 3536 10 15 20% 20% 10 3873 10 15 20% 20% 25 2449 10 15 20% 20% 15 3162 10 15 20% 20% 12 3536 10 15 20% 20% 500 141 4 6 20% 20% 500 141 4 6 20% 20% 300 289 6 9 20% 20% 500 141 4 6 20% 20% 300 289 6 9 20% 20% 500 141 6 6 20% 20% 300 289 6 9 20% 20% 300 500 6 9 20% 20% 200 354 6 9 20% 20% 200 548 6 9 20% 20% 200 612 6 9 20% 20% 200 548 6 9 20% 20% 200 612 6 9 20% 20% 150 753 8 12 20% 20% 200 548 6 9 20% 20% 180 645 6 9 20% 20% 70 1035 8 12 20% 20% 150 753 8 12 20% 20% 180 645 6 9 20% 20% 70 1035 8 12 20% 20% 150 753 8 12 20% 20% 180 645 6 9 20% 20% 70 1035 6 9 20% 20% 70 1035 8 12 20% 20% 55 1168 8 12 20% 20% 150 753 8 12 20% 20% 70 1102 8 12 20% 20% 70 1134 9 14 20% 20% 100 1049 9 14 20% 20% 70 1035 8 12 20% 20% 70 1102 8 12 20% 20% 55 1243 8 12 20% 20%
PS/L Series
Rated Capacitance Case Voltage Code ( F) (V) 68 68 100 100 100 100 100 100 100 100 100 100 100 100 100 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 220 220 220 220 220 220 220 220 220 220 330 330 330 330 330 2.2 3.3 3.3 4.7 4.7 4.7 6.8 6.8 6.8 10 10 10 10 15 15 C2 C A A A B2 B2 B2 B2 C2 C2 C C V V B15 B15 B2 B2 B2 C2 C C C C V V V V V D D D B2 B2 B2 V V V V D D D V V D D D J J A J A2 A A2 A B2 P A2 A B2 A B2
Part Number (Bulk) PSLC20J686M PSLC0J686M PSLA0J107M(70) PSLA0J107M(45) PSLA0J107M(35) PSLB20J107M PSLB20J107M(45) PSLB20J107M(35) PSLB20J107M(25) PSLC20J107M PSLC20J107M(55) PSLC0J107M PSLC0J107M(55) PSLV0J107M(18) PSLV0J107M(15) PSLB150J157M(70) PSLB150J157M(35) PSLB20J157M PSLB20J157M(35) PSLB20J157M(25) PSLC20J157M PSLC0J157M PSLC0J157M(55) PSLC0J157M(45) PSLC0J157M(25) PSLV0J157M PSLV0J157M(25) PSLV0J157M(18) PSLV0J157M(15) PSLV0J157M(12) PSLD0J157M PSLD0J157M(40) PSLD0J157M(25) PSLB20J227M(45) PSLB20J227M(35) PSLB20J227M(25) PSLV0J227M PSLV0J227M(25) PSLV0J227M(15) PSLV0J227M(12) PSLD0J227M PSLD0J227M(40) PSLD0J227M(25) PSLV0J337M PSLV0J337M(25) PSLD0J337M PSLD0J337M(25) PSLD0J337M(18) PSLJ1A225M PSLJ1A335M PSLA1A335M PSLJ1A475M PSLA21A475M PSLA1A475M PSLA21A685M PSLA1A685M PSLB21A685M PSLP1A106M PSLA21A106M PSLA1A106M PSLB21A106M PSLA1A156M PSLB21A156M
6.3
10
Leakage Current ( A) Max 42.8 42.8 63 63 63 63 63 63 63 63 63 63 63 63 63 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 138.6 138.6 138.6 138.6 138.6 138.6 138.6 138.6 138.6 138.6 207.9 207.9 207.9 207.9 207.9 10 10 3.3 10 4.7 4.7 6.8 6.8 6.8 10 10 10 10 15 15
DF (%) Max 9 9 8 8 8 8 8 8 8 9 9 9 9 10 10 10 10 8 8 8 9 9 9 9 9 10 10 10 10 10 10 10 10 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 4 6 6 6 6 6 6 6 8 6 6 6 8 6 8
ESR Permissible DF (%) Max Capacitance Change Ripple (m) at Surge Voltage Current Max (mA rms.) -55 +105 at Resistance to at Endurance Soldering Heat *1 55 1279 9 14 20% 20% 100 1049 9 14 20% 20% 70 1035 8 12 20% 20% 45 1300 8 12 20% 20% 35 1500 8 12 20% 20% 70 1102 8 12 20% 20% 45 1374 8 12 20% 20% 35 1558 8 12 20% 20% 25 1844 8 12 20% 20% 70 1134 9 14 20% 20% 55 1279 9 14 20% 20% 100 1049 9 14 20% 20% 55 1414 9 14 20% 20% 18 2635 10 15 20% 20% 15 2887 10 15 20% 20% 70 1069 10 15 20% 20% 35 1512 10 15 20% 20% 45 1374 8 12 20% 20% 35 1558 8 12 20% 20% 25 1844 8 12 20% 20% 55 1279 9 14 20% 20% 100 1049 9 14 20% 20% 55 1414 9 14 20% 20% 45 1563 9 14 20% 20% 25 2098 9 14 20% 20% 45 1667 10 15 20% 20% 25 2236 10 15 20% 20% 18 2635 10 15 20% 20% 15 2887 10 15 20% 20% 12 3227 10 15 20% 20% 55 1651 10 15 20% 20% 40 1936 10 15 20% 20% 25 2449 10 15 20% 20% 45 1374 8 12 20% 20% 35 1558 8 12 20% 20% 25 1844 8 12 20% 20% 45 1667 10 15 20% 20% 25 2236 10 15 20% 20% 15 2887 10 15 20% 20% 12 3227 10 15 20% 20% 55 1651 10 15 20% 20% 40 1936 10 15 20% 20% 25 2449 10 15 20% 20% 45 1667 10 15 20% 20% 25 2236 10 15 20% 20% 40 1936 10 15 20% 20% 25 2449 10 15 20% 20% 18 2887 10 15 20% 20% 500 141 4 6 20% 20% 500 141 6 6 20% 20% 300 500 6 9 20% 20% 500 141 6 6 20% 20% 300 447 6 9 20% 20% 300 500 6 9 20% 20% 300 447 6 9 20% 20% 300 500 6 9 20% 20% 200 652 8 12 20% 20% 200 354 6 9 20% 20% 200 548 6 9 20% 20% 200 612 6 9 20% 20% 200 652 8 12 20% 20% 180 645 6 9 20% 20% 150 753 8 12 20% 20%
16
9653TCAVOL14E1109E0
PS/L Series
10
16
20
25
15 22 22 22 22 33 33 33 33 33 47 47 47 47 47 47 47 47 68 68 68 68 68 100 100 100 100 100 100 100 100 150 150 150 150 150 220 220 220 3.3 4.7 6.8 10 33 47 47 68 68 22 33 47 47 6.8 15 22 33
C A B3 B2 C A B3 B2 C2 C B3 B2 B2 C2 C C V D C2 C C V D B2 C2 C2 C C V V D C V V D D D D D A B2 B2 B2 V V D V D V V V D B2 V V D
PSLC1A156M PSLA1A226M PSLB31A226M PSLB21A226M PSLC1A226M PSLA1A336M PSLB31A336M PSLB21A336M PSLC21A336M PSLC1A336M PSLB31A476M PSLB21A476M PSLB21A476M(35) PSLC21A476M PSLC1A476M PSLC1A476M(55) PSLV1A476M PSLD1A476M PSLC21A686M PSLC1A686M PSLC1A686M(55) PSLV1A686M PSLD1A686M PSLB21A107M(45) PSLC21A107M PSLC21A107M(55) PSLC1A107M PSLC1A107M(55) PSLV1A107M PSLV1A107M(25) PSLD1A107M PSLC1A157M PSLV1A157M PSLV1A157M(40) PSLD1A157M PSLD1A157M(40) PSLD1A227M PSLD1A227M(40) PSLD1A227M(25) PSLA1C335M PSLB21C475M PSLB21C685M PSLB21C106M PSLV1C336M PSLV1C476M PSLD1C476M PSLV1C686M PSLD1C686M PSLV1D226M PSLV1D336M PSLV1D476M PSLD1D476M PSLB21E685M PSLV1E156M PSLV1E226M PSLD1E336M
9 6 8 8 9 8 8 8 9 9 8 8 8 9 9 9 10 10 9 9 9 10 10 10 9 9 9 9 10 10 10 9 10 10 10 10 10 10 10 6 8 8 8 10 10 10 10 10 10 10 10 10 8 10 10 10
17
9653TCAVOL14E1109E0
Part Number (Bulk)
Leakage Current ( A) Max 15 22 22 22 22 33 33 33 33 33 47 47 47 47 47 47 47 47 68 68 68 68 68 100 100 100 100 100 100 100 100 150 150 150 150 150 220 220 220 5.2 7.5 10.8 16 52.8 75.2 75.2 108.8 108.8 44 66 94 94 17 37.5 55 82.5
DF (%) Max
ESR Permissible DF (%) Max Capacitance Change Ripple (m) at Surge Voltage Current Max (mA rms.) -55 +105 at Resistance to at Endurance Soldering Heat *1 200 742 9 14 20% 20% 180 645 6 9 20% 20% 70 1035 8 12 20% 20% 150 753 8 12 20% 20% 150 856 9 14 20% 20% 200 612 8 12 20% 20% 70 1035 8 12 20% 20% 150 753 8 12 20% 20% 70 1134 9 14 20% 20% 100 1049 9 14 20% 20% 70 1035 8 12 20% 20% 70 1102 8 12 20% 20% 35 1558 8 12 20% 20% 70 1134 9 14 20% 20% 100 1049 9 14 20% 20% 55 1414 9 14 20% 20% 60 1443 10 15 20% 20% 100 1225 10 15 20% 20% 55 1279 9 14 20% 20% 100 1049 9 14 20% 20% 55 1414 9 14 20% 20% 60 1443 10 15 20% 20% 100 1225 10 15 20% 20% 45 1374 10 15 20% 20% 70 1134 9 14 20% 20% 55 1279 9 14 20% 20% 100 1049 9 14 20% 20% 55 1414 9 14 20% 20% 45 1667 10 15 20% 20% 25 2236 10 15 20% 20% 55 1651 10 15 20% 20% 55 1414 9 14 20% 20% 45 1667 10 15 20% 20% 40 1768 10 15 20% 20% 55 1651 10 15 20% 20% 40 1936 10 15 20% 20% 55 1651 10 15 20% 20% 40 1936 10 15 20% 20% 25 2449 10 15 20% 20% 800 306 6 9 20% 20% 200 652 8 12 20% 20% 200 652 8 12 20% 20% 100 922 8 12 20% 20% 70 1336 10 15 20% 20% 70 1336 10 15 20% 20% 70 1464 10 15 20% 20% 50 1581 10 15 20% 20% 55 1651 10 15 20% 20% 90 1179 10 15 20% 20% 70 1336 10 15 20% 20% 70 1336 10 15 20% 20% 70 1464 10 15 20% 20% 100 922 8 12 20% 20% 90 1179 10 15 20% 20% 90 1179 10 15 20% 20% 60 1581 10 15 20% 20%
F/PS
FEATURE DIMENSIONS
Series
Face Down Terminal / RoHS Compliant
bLead-free type. RoHS Compliant. bFace down terminal.
bThe low-prole of height 1.0 mm Max, large capacitance and ultra-low ESR. bEnable llet bonding.
Cathode side
Anode side
W2 W1 W2
Case Code
A3
(Unit: mm)
L
3.2 0.2
W1
1.6 0.2
W2
1.2 0.1
H
0.9 0.1
Z
0.8 0.2

UR 10 15 22 33 47 68 100 106 156 226 336 476 686 107 A3 200 A3 200 A3 200 A3 200 A3 200
UR :Rated Voltage
4.0 0G
6.3 0J
10 1A
*Numeral: ESR(m)
18
9653TCAVOL14E1109E0
F/PS Series
PART NUMBER SYSTEM

[Bulk]
[Tape and Reel]
Capacitance Tolerance M: 20% Capacitance (in pF) First two digits represent significant figures. Third digit specifies number of zeros to follow.
Packing Orientation R: Cathode on the Side of Sproket Hole Tape width Part number of Bulk Tape and Reel packing 8 : 8 mm
Rated voltage Case code F/PS Series
0G : 4 V, 0J : 6.3 V, 1A : 10 V
MARKINGS
[A3 case Marking Code]
F UR
22 47 J7 UR :Rated Voltage 4V 6.3V j 10V AJ7 AN7 jS7 gA8 AS7 A
[A3, cases] (ex. 33 F / 10 V)
FAN7
Marking Code (DC Rated Voltage and Capacitance) Production Date Code Polarity
g
33 68 N7 W7 A8 S7
100
[A3 cases production date code]

Y M
2011 2012 2013 2014
a n A N
b p B P
c q C Q
d r D R
e s E S
f t F T
g u G U
h v H V
j w J W
k x K X
l y L Y
m z M Z
19
9653TCAVOL14E1109E0
FPS A3 1A 336 M
TE FPSA31A336M 8
F/PS Series
ITEM Operating temperature Rated voltage (V.dc) Derated voltage (V.dc) Surge voltage (V.dc) Capacitance Capacitance tolerance DC Leakage Current (L.C) Dissipation Factor Equivalent Series Resistance Capacitance change 4V 3.3V 5.2V PERFORMANCE 55 to +105 6.3V 5V 8V 22 F to 100F 20% 0.1C V(A) or 3A, whichever is greater Refer to Standard Ratings Refer to Standard Ratings DF(%) Lower than initial specification Lower than initial specification Lower than 1.5 times initial specification L.C Lower than initial specification 10V 8V 13V
TEST CONDITION Derated voltage at 85 at more at 85 at 105 at 85 at 120 Hz Voltage: Rated voltage for 5min. at 120 Hz at 100 kHz Temperature : 852 Applied voltage : Surge voltage Series resistance : 33 ohm Duration of surge : 305 sec Time between surge : 5.5min. Number of cycle : 1000
Surge voltage test
55 +105
Step 1: 252 0 Step 2: 55 3 Step 3: 252 0 Step 4: 105 3
Parts shall be temperature cycled over a temperature range of 55 to +105, five times continuously as follow. 0 Step 1: 55 3 , 303min. Step 2: room temp. , 10 to 15min. 0 Step 3: 105 3 , 303min. Step 4: room temp, 10 to 15min. Reflow soldering method 240, 10 sec.Max. *1
Lower than 1.3 times initial specification Lower than 1.5 times initial specification Lower than 1.5 times initial specification Lower than 3 times initial specification 0 = 1% / 1000 hour
at 40 at 90 to 95% RH 500 hour at 85 at rated voltage 1000 hour
Refer to Standard Ratings Refer to Standard Ratings
at 105 at Derated voltage 1000 hour at 85: rated voltage at 105: derated voltage 1000 hour
Visual: There shall be no evidence of mechanical damage Refer to Ratings Table Conform to IEC603841
Strength : 4.9N Time : 100.5sec. (two directions) at 100 kHz
Conform to IEC603841
Reference : Derated voltage (85 to 105C) [UR] [UC] (T85) [UT] = [UR] 20 [UT] : Derated voltage at operating temperature [UR] : Rated voltage [UC] : Derated voltage at 105C T : Operating temperature
20
9653TCAVOL14E1109E0
F/PS Series
STANDARD RATINGS
Rated Capacitance Case Voltage Code ( F ) (V)
4 6.3 10 100 47 22 33 47 A3 A3 A3 A3 A3
FPSA30G107M FPSA30J476M FPSA31A226M FPSA31A336M FPSA31A476M
Max 8 6 8 6 6
FREQUENCY CHARACTERISTICS (reference)

100
Impedance ()
10
FPSA31A336M
0.1
0.01
FPSA30J476M
100 1k 10k 100k 1M 10M 100M
Frequency (Hz)
100
10
ESR()
FPSA31A336M
0.1
0.01
FPSA30J476M
100 1k 10k 100k 1M 10M 100M
Frequency (Hz)
21
9653TCAVOL14E1109E0
Part Number (Bulk)
Leakage Current ( A ) Max 40 29.6 22 33 47
DF (%)
Capacitance Change ESR Permissible DF (%) Max Ripple at Surge Voltage (m ) Current (mA rms.) -5 +105 at Resistance to at Endurance Max Soldering Heat Max 200 548 8 12 20% 20% 200 548 6 9 20% 20% 200 548 8 12 20% 20% 200 548 6 9 20% 20% 200 548 6 9 20% 20%
G/PS
FEATURE DIMENSIONS
Series
bThe low-prole of height 1.0 mm Max, much large capacitance and ultra-low ESR and Low ESL. bSubstrate terminal. bEnable llet bonding. bLead-free type. RoHS Compliant.
[ P2 Case ]
L
W1
W2
W2
Case Code
P2
(Unit: mm)
L
2.0 0.1
W1
1.25 0.1
W2
0.9 0.1
H
0.9 0.1
Z
0.55 0.1

UR F
UR :Rated Voltage
2.5 0E
4 0G
6.3 0J
10 1A P2200
15 22 33 47 68 100 150
156 226 336 476 686 107 157 P2200
*Numeral: ESR(m)
22
9653TCAVOL14E1109E0
G/PS Series
PART NUMBER SYSTEM

[Bulk]
[Tape and Reel]
Capacitance Tolerance M : 20% Capacitance (in pF) First two digits represent significant figures. Third digit specifies number of zeros to follow.
Packing Orientation R: Cathode on the Side of Sproket Hole Tape width 8 : 8 mm Part number of Bulk Tape and Reel packing
Rated voltage (0J: 6.3V, 1A: 10V) Case code G/PS series
MARKINGS
[P2 case] (ex. 47 F / 6.3 V) [P2 case Marking Code]
F UR
15 22 33 47 68 100 150 Js Aj 2.5 4
UR :Rated Voltage 6.3 10
mJs
Marking Code (DC Rated Voltage and Capacitance) Production Date Code Polarity
Production Date Code

Y M
2011 2012 2013 2014
a n A N
b p B P
c q C Q
d r D R
e s E S
f t F T
g u G U
h v H V
j w J W
k x K X
l y L Y
m z M Z
23
9653TCAVOL14E1109E0
GPS P2 0J 476 M
TE GPSP20J476M 8 R
G/PS Series
ITEM Operating temperature Rated voltage (V.dc) Derated voltage (V.dc) Surge voltage (V.dc) Capacitance Capacitance tolerance DC Leakage Current (L.C) Dissipation Factor Equivalent Series Resistance Capacitance change 6.3V 5.0V 8.0V 22 F to 47 F 20% 0.1C V(A) or 3A , whichever is greater Refer to Standard Ratings Refer to Standard Ratings DF(%) Lower than initial specification Lower than initial specification Lower than 1.5 times initial specification L.C Lower than initial specification PERFORMANCE 55 to +105 10V 8.0V 13V
TEST CONDITION Derated voltage at 85 at more at 85 at 105 at 85 at 120 Hz Voltage: Rated voltage for 5min. at 120 Hz at 100 kHz Temperature : 852 Applied voltage : Surge voltage Series resistance : 33 ohm Duration of surge : 305 sec Time between surge : 5.5min. Number of cycle : 1000 Step 1: 252 Step 2: 55 Step 3: 252 Step 4: 105
Surge voltage test
55 +105
Parts shall be temperature cycled over a temperature range of 55 to +105, five times continuously as follow. Step 1: 55, 303min. Step 2: room temp. , 10 to 15min. Step 3: 105, 303min. Step 4: room temp, 10 to 15min. Reflow soldering method 240, 10 sec.Max. *1
Lower than 1.3 times initial specification Lower than 1.5 times initial specification
Lower than 3 times initial specification Lower than 3 times initial specification Lower than 3 times initial specification Lower than 3 times initial specification
at 40 at 90 to 95% RH 500 hour at 85 at rated voltage 1000 hour
Refer to Standard Ratings Lower than 1.5 times initial specification Refer to Standard Ratings Lower than 3 times initial specification 0 = 1% / 1000 hrs Visual: There shall be no evidence of mechanical damage Refer to Standard Ratings Conform to IEC603841
at 105 at Derated voltage 1000 hour at 85: rated voltage at 105: derated voltage 1000 hour
Strength : 4.9N Time : 100.5sec. (two directions) at 100 kHz
Reference : Derated voltage (85 to 105C) [UR] [UC] (T85) [UT] = [UR] 20 [UT] : Derated voltage at operating temperature [UR] : Rated voltage [UC] : Derated voltage at 105C T : Operating temperature
24
9653TCAVOL14E1109E0
G/PS Series
STANDARD RATINGS
Rated Capacitance Case Voltage Code ( F) (V) 6.3 10 47 47 P2 P2 Part Number (Bulk) GPSP20J476M GPSP21A226M Leakage Current ( A) Max 29.6 22 DF (%) Max 6 6 Permissible DF (%) Max Capacitance Change Ripple at Surge Voltage Current (m ) (mA rms.) -55 +105 at Resistance to at Endurance Max Soldering heat Max 200 354 6 9 20% 20% 200 354 6 9 20% 20% ESR
25
9653TCAVOL14E1109E0
F/SV
FEATURE DIMENSIONS
Series
Manganese dioxide type
bLead-free type. RoHS Compliant. bFace down terminal.
bThe low-prole of height 0.9mm Max and large capacitance of 47F available in 1608 size. bEnable llet bonding.
Cathode side
Anode side
W2 W1 W2
Case Code
J P2 A3
(Unit: mm)
L
1.6 0.1 2.0 0.1 3.2 0.2
W1
0.85 0.1 1.25 0.1 1.6 0.2
W2
0.65 0.1 0.9 0.1 1.2 0.1
H
0.8 0.1 0.9 0.1 0.9 0.1
Z
0.5 0.1 0.55 0.1 0.8 0.2

UR :Rated Voltage
UR
2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 220
225 335 475 685 106 156 226 336 476 686 107 227
2.5V 0E
4V 0G
6.3V 0J
10V 1A
16V 1C
20V 1D
25V 1E
A3 J
A3
J P2 A3
J P2
A3
A3
26
9653TCAVOL14E1109E0
F/SV Series
[Bulk]
PART NUMBER SYSTEM
[Tape and Reel]

TE FSVP20E107M 8 R Packing Orientation R: Cathode on the Side of Sproket Hole Tape width 8 : 8 mm Part number of Bulk Tape and Reel packing
FSV P2 0E 107 M Capacitance Tolerance M: 20% Capacitance (in pF) First two digits represent significant figures. Third digit specifies number of zeros to follow.
Rated voltage Case code F/SV Series
MARKINGS
[J case] (ex. 47 F / 2.5 V)
J case Marking code
UR :Rated Voltage
2.5
6.3
10
16
20
e
Polarity Stripe (+) Rated voltage and capacitance
4.7 6.8 10 15 22 33 47
e-
G-
J-
[P2 case] (ex. 100 F / 2.5 V)
P2 case Making code
ea
Marking Code (DC Rated Voltage and Capacitance) Polarity
UR
10 15 22 33 47 68 100
2.5
6.3
10
16
20
25
ea
GW
[A3 case] (ex. 220 F / 2.5 V)
A3 case Making code
eJ8F
Production Date Code Marking Code (DC Rated Voltage and Capacitance) Polarity
6.8 10 15 22 33 47 68 100 150 220
UR 2.5V e W6 A7 E7 J7 N7 S7 W7 A8 E8 eJ8 J8
4V g
6.3V j
10V A
16V C CA7
20V D
25V E EW6
AN7 jW7
[A3 case production date code]

Y M
2011 2012 2013 2014
a n A N
b p B P
c q C Q
d r D R
e s E S
f t F T
g u G U
h v H V
j w J W
k x K X
l y L Y
m z M Z
27
9653TCAVOL14E1109E0
UR
F/SV Series
ITEM Operating temperature Rated voltage (V.dc) Derated voltage (V.dc) Surge voltage (V.dc) Capacitance Capacitance tolerance DC Leakage Current (L.C) Dissipation Factor Equivalent Series Resistance Capacitance change 2.5V 1.6V 3.3V 4V 2.5V 5.2V PERFORMANCE -55 to +125 6.3V 4V 8V 20% 0.01C V(A) or 0.5A , whichever is greater Refer to Standard Ratings Refer to Standard Ratings DF(%) Lower than initial specification Refer to Standard Ratings Lower than initial specification Refer to Standard Ratings L.C Lower than initial specification 10V 6.3V 13V 16V 10V 20V 25V 16V 33V
TEST CONDITION Derated voltage at 85 at more at 85 at 125 at 85 at 120 Hz Voltage: Rated voltage for 5min. at 120 Hz at 100 kHz Temperature : 852 Applied voltage : Surge voltage Series resistance : 33 ohm Duration of surge : 305 sec Time between surge : 5.5min. Number of cycle : 1000 Step 1: 252 0 Step 2: -55 -3 Step 3: 252 0 Step 4: 125 -3 Parts shall be temperature cycled over a temperature range of -55 to +125, five times continuously as follow. 0 Step 1: -55 -3 , 303min. Step 2: room temp. , 10 to 15min. 0 Step 3: 125 -3 , 303min. Step 4: room temp, 10 to 15min. solder dip : 260, 5sec solder reflow : 260, 10sec at 40 at 90 to 95% RH 500 hour at 85 : Rated voltage at 125 : Derated voltage 2000 hour at 85: Rated voltage at 125: Derated voltage 2000 hour Strength : 4.9N Time : 100.5sec. (two directions) Conform to IEC603841
6.8 F to 220 F
Surge voltage test
-55 Characteristic at high and low temperature +85 +125
Not to exceed -20% Not to exceed +20% Not to exceed +20%
0.1CV( A) or 5 A, which ever is greater 0.125CV( A) or 6.25 A, which ever is greater
Lower than initial specification Lower than 1.5 times initial specification Lower than initial specification 0=1% / 1000 hour
Lower than initial specification Lower than initial specification Lower than 2 times initial specification
Endurance
Failure Rate Terminal Strength Others
Visual: There shall be no evidence of mechanical damage Conform to IEC603841
[UT] = [UR]
[UR] [UC] 40
(T85)
[UT] : Derated voltage at operating temperature [UR] : Rated voltage [UC] : Derated voltage at 125fC T : Operating temperature
28
9653TCAVOL14E1109E0
F/SV Series
RATINGS
2.5 4 6.3 10 16 25 47 100 220 33 68 22 68 33 10 6.8 J P2 A3 J P2 J A3 A3 A3 A3
Part Number (Bulk)

FSVJ0E476M FSVP20E107M FSVA30E227M FSVJ0G336M FSVP20G686M FSVJ0J226M FSVA30J686M FSVA31A336M FSVA31C106M FSVA31E685M
Leakage Current ( A ) Max 1.1 2.5 5.5 1.3 2.7 1.3 4.2 3.3 1.6 1.7
DF (%) Max 30 35 20 30 18 20 20 12 8 15
ESR () Max 4 3 1 4 2.5 4 2 1 3 3
DF (%) Max -55

60 60 40 60 34 38 38 22 12 30
+125
40 40 30 30 20 22 22 14 10 20
at Surge Voltage at Damp Heat at Resistance to at Endurance Soldering Heat
Capacitance Change
20% 20% 20% 20% 20% 20% 20% 20% 20% 20%
20% 20% 20% 20% 20% 20% 20% 20% 20% 20%
CHARACTERISTICS (reference)
Impedance-frequency characteristics
100
FSVJ0E476M Impedance ()
10
0.1 100
1k
10k
100k
1M
10M
100M
Frequency (Hz)
ESR-frequency characteristics
100
FSVJ0E476M
10
ESR ()
0.1 100
1k
10k
100k
1M
10M
100M
Frequency (Hz)
29
9653TCAVOL14E1109E0
E/SV
FEATURES DIMENSIONS [mm]
Series
Standard / RoHS Compliant

b Lead-free Type. RoHS Compliant. b Offer a range of small, high-capacity models.
b Succeed to the latest technology plus outstanding peformance. b Halogen free, Antimony free and Red Phosphorous free resin is applied to the exterior mold resin.
[J, P, A2, A cases]

Z
L H Z W2
W1
[B3, B2 cases]
L H Z Z W2
W1
W1
[C2, C, V, D cases]
H Z Z W2
Case Code J P A2 (U) A B3 (W) B2 (S) C2 C V D
(Unit: mm)
EIA code 2012 3216L 3216 3528L 3528 6032 7343
L 1.6 0.1 2.0 0.2 3.2 0.2 3.2 0.2 3.5 0.2 3.5 0.2 6.0 0.2 6.0 0.2 7.3 0.2 7.3 0.2
W1 0.8 0.1 1.25 0.2 1.6 0.2 1.6 0.2 2.8 0.2 2.8 0.2 3.2 0.2 3.2 0.2 4.3 0.2 4.3 0.2
W2 0.6 0.1 0.9 0.1 1.2 0.1 1.2 0.1 2.2 0.1 2.2 0.1 2.2 0.1 2.2 0.1 2.4 0.1 2.4 0.1
H 0.8 0.1 1.1 0.1 1.1 0.1 1.6 0.2 1.1 0.1 1.9 0.2 1.4 0.1 2.5 0.2 1.9 0.1 2.8 0.2
Z 0.3 0.15 0.5 0.1 0.8 0.2 0.8 0.2 0.8 0.2 0.8 0.2 1.3 0.2 1.3 0.2 1.3 0.2 1.3 0.2
30
9653TCAVOL14E1109E0
E/SV Series

F
UR
0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 474 684 105 155 225 335 475 685 106 156 226 336 476 686 107 157 227 337 477 687
2.5V 0E
4V 0G
6.3V 0J
10V 1A
16V 1C
P P
20V 1D
A2 A2 A2 A2 P, A2, A A2, A, B3 A2, A, B3, B2 B3, B2 B2 C B2, C2, C, D D C, D
25V 1E
A A P, A2, A A A B3, B2 B2 C2, C C D D
UR :Rated Voltage
35V 1V
A A
P P J P J J J P, A2 P, A2 P, A2, A A A, B3, B2 A, B3, C2 B3, B2, C2 B3, B2, C B2, C, D J, P P P, A2, A P, A2, A P, A2, A, B3 A, B3 B2, C2 B2, C C, V D D J J, P, A J, P, A2 J, P, A2, A P, A2, A P, A2, A, B3, B2 A2, A, B3 A, B3, B2, C A, B3, B2, C2 B2, C B2, C, V, D V, D D J, P J, P J, P, A2 J, P, A2, A A2, A P, A2, A, B2 A2, B3 A, B3, B2 B3, B2 A, B2, C2, C B2, C2, C B2, C2, C, V, D V, D D
J, P J, A J, P, A2, A P, A2, A A2, A A, B3 A, B3, B2 A, B2 B3, B2, C B2, C2, C C, D C, D D
A2, A A A, B2 B3, B2 C C C, D D
100 150 220 330 470 680
A2, A, B3, B2, C2 A, B3, B2, C2, C
PART NUMBER SYSTEM

[Bulk]
ESV D 0G 687 M
Capacitance tolerance M : 20% K : 10% Capacitance (pF) First two digits represent significant figures. Third digit specifies number of zeros to follow.
[Tape and Reel]

TE ESVD0G687M 12 R
Packing Orientation R : Cathode on the Side of Sproket Hole
Tape width 8 : 8 mm (J, P, A2, A, B3, B2 case) 12 : 12 mm (C2, C, V, D case)

Part number of Bulk Tape and Reel TE : 180 mm reel
DC rated voltage in volts 0E : 2.5 V, 0G : 4 V, 0J : 6.3 V, 1A : 10 V, 1C : 16 V, 1D : 20 V, 1E : 25 V, 1V : 35 V Case code E/SV Series
TL ESVD0G687M 12 R
Tape and Reel
E
Indicates 330mm reel
TL : 330 mm reel
31
9653TCAVOL14E1109E0
E/SV Series
MARKINGS
The standard marking shows capacitance, DC rated voltage, and polarity.

[J case] (ex. 4.7 F / 6.3 V)
[J case Marking Code]

F UR
1.0 1.5 2.5 V 4V 6.3 V
UR :Rated Voltage
2.2 3.3 4.7
Polarity
10
[P case] (ex. 1 F / 10 V)
15
AA
Marking Code (DC Rated Voltage and Capacitance) Polarity
[P case Marking Code]

F UR
0.47 1 0.68 1.5 JE GN JS JW GA GE eJ eN eS GJ GN GS JA JE JJ AA 2.5 V 4V 6.3 V 10 V 16 V CS CW AA AE AJ AN AS CJ CN DJ CA EA 20V 25V
3.3
2.2 4.7
[A2, A cases] (ex. 10 F / 6.3 V)
J106
Capacitance (pF) DC Rated Voltage Code Polarity
33 47
22
15
10
6.8
[P, A2, A, cases DC Rated Voltage code]

Rated Voltage Code e 2.5 V G 4V J 6.3 V A 10 V C 16 V D 20 V E 25 V V 35V
[B3, B2 cases] (ex. 47 F / 6.3 V)
6T
Polarity
47
Capacitance (F) Production Date Code DC Rated Voltage
[B3, B2, C2, C, V, D cases Production date code]

Y M
2011 2012 2013 2014
a n A N
b p B P
c q C Q
d r D R
e s E S
f t F T
g u G U
[C2, C, V, D cases] (ex. 220 F / 6.3 V)
Polarity
220 6T
32
6.8
e e
G G
Marking Code (DC Rated Voltage and Capacitance)
J J
h v H V
j w J W
A A
k x K X
l y L Y
C C
m z M Z
9653TCAVOL14E1109E0
10 V
16 V
E/SV Series
ITEM Operating temperature Rated voltage (V.dc) Derated voltage (V.dc) Surge voltage (V.dc) Capacitance Capacitance tolerance DC Leakage Current (L.C) Dissipation Factor Equivalent Series Resistance Capacitance change 2.5V 1.6V 3.3V 4V 2.5V 5.2V 6.3V 4V 8V PERFORMANCE 55 to +125 10V 6.3V 13V 16V 10V 20V 20V 13V 26V 25V 16V 33V
TEST CONDITION Derated voltage at 85 at more 35V 22V 46V at 85 at 125 at 85 at 120 Hz Voltage: Rated voltage for 5min. at 120 Hz at 100 kHz L.C Lower than initial specification 0.1C V(A) or 5A, which ever is greater 0.125C V(A) or 6.25A, which ever is greater Temperature : 852 Applied voltage : Surge voltage Series resistance : 33 ohm Duration of surge : 305 sec Time between surge : 5.5min. Number of cycle : 1000 Step 1: 252 0 Step 2: 55 3 Step 3: 252 0 Step 4: 125 3 Parts shall be temperature cycled over a temperature range of 55 to +125, five times continuously as follow. 0 Step 1: 55 3 , 303min. Step 2: room temp. 10 to 15min. 0 Step 3: 125 3 , 303min. Step 4: room temp, 10 to 15min. solder dip : 260, 5sec solder reflow : 260,10sec at 40 at 90 to 95% RH 500 hour
0.47 F to 680 F 20% or 10% (P,J case: 20%) 0.01C V(A) or 0.5 A , whichever is greater Refer to Standard Ratings Refer to Standard Ratings DF(%) Lower than initial specification
Surge voltage test
55 Characteristic at high and low temperature +85 +125
Not to exceed 20% (P, J case) Refer to Standard Ratings or 12% Not to exceed +20% (P, J case) or +12% Lower than initial specification
Not to exceed +20% (P, J case) Refer to Standard Ratings or +15%
Lower than initial specification Lower than 1.5 times initial specification Lower than initial specification 0=1% / 1000 hour
Lower than initial specification Lower than initial specification
Endurance
Lower than 2 times initial at 85: Rated voltage specification (P, J case) or 1.25 at 125: Derated voltage times initial specification 2000 hour at 85: Rated voltage at 125: Derated voltage 2000 hour Strength : 4.9N Time : 100.5sec. (two directions)
Reference : Derated voltage (85 to 125C) [UT] = [UR] [UR] [UC] 40 (T85)
[UT] : Derated voltage at operating temperature [UR] : Rated voltage [UC] : Derated voltage at 125C T : Operating temperature
33
9653TCAVOL14E1109E0
E/SV Series
STANDARD RATINGS
10 15 22 22 33 33 47 47 47 68 100 100 100 150 150 150 220 220 220 330 330 330 470 470 470 3.3 6.8 10 10 15 22 22 22 33 33 33 47 47 47 47 68 68 100 100 100 100 100 150 150 220 220 330 330 470 680 1.5 2.2 3.3 4.7 4.7 4.7 6.8 6.8 J J P A2 A2 P P A2 A A A B3 B2 A B3 C2 B3 B2 C2 B3 B2 C B2 C D P J J P P P A2 A P A2 A P A2 A B3 A B3 A2 A B3 B2 C2 B2 C2 B2 C C V D D P J J J P A J P
Part Number (Bulk)

ESVJ0E106M ESVJ0E156M ESVP0E226M ESVA20E226M ESVA20E336M ESVP0E336M ESVP0E476M ESVA20E476M ESVA0E476M ESVA0E686M ESVA0E107M ESVB30E107M ESVB20E107M ESVA0E157M ESVB30E157M ESVC20E157M ESVB30E227M ESVB20E227M ESVC20E227M ESVB30E337M ESVB20E337M ESVC0E337M ESVB20E477M ESVC0E477M ESVD0E477M ESVP0G335M ESVJ0G685M ESVJ0G106M ESVP0G106M ESVP0G156M ESVP0G226M ESVA20G226M ESVA0G226M ESVP0G336M ESVA20G336M ESVA0G336M ESVP0G476M ESVA20G476M ESVA0G476M ESVB30G476M ESVA0G686M ESVB30G686M ESVA20G107M ESVA0G107M ESVB30G107M ESVB20G107M ESVC20G107M ESVB20G157M ESVC20G157M ESVB20G227M ESVC0G227M ESVC0G337M ESVV0G337M ESVD0G477M ESVD0G687M ESVP0J155M ESVJ0J225M ESVJ0J335M ESVJ0J475M ESVP0J475M ESVA0J475M ESVJ0J685M ESVP0J685M
2.5
6.3
Leakage Current ( A) Max 0.5 0.5 0.5 0.5 0.8 0.8 1.1 1.1 1.1 1.7 2.5 2.5 2.5 3.7 3.7 3.7 5.5 5.5 5.5 8.2 8.2 8.2 11.7 11.7 11.7 0.5 0.5 0.5 0.5 0.6 0.8 0.8 0.8 1.3 1.3 1.3 1.8 1.8 1.8 1.8 2.7 2.7 4 4 4 4 4 6 6 8.8 8.8 13.2 13.2 18.8 27.2 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
DF (%) Max
20 20 20 12 12 20 30 12 12 18 30 18 8 30 20 12 30 18 12 30 25 16 35 18 14 20 20 20 20 20 20 12 8 20 8 10 30 15 12 12 12 15 30 30 20 12 10 18 10 18 12 14 12 16 24 10 20 20 20 20 8 20 20
ESR ()
6.5 8 4 3 4 4 6 4.5 4.5 4.5 2 1.3 1 2 1 0.8 1 0.6 0.8 1 0.6 0.3 0.6 1.5 0.5 20 7.5 6.5 6 5 4 2.8 2.5 4 4.5 3 3 4.5 2.5 1.7 2.5 1.5 2 2 1.3 0.8 0.8 0.7 0.8 0.5 0.6 0.2 0.5 0.3 0.3 25 17.5 13.5 8.5 10 5.5 7 7
DF (%) Max -55

30 30 30 20 22 30 60 22 22 34 60 34 14 60 40 26 60 34 26 60 50 34 70 34 18 30 30 30 30 30 30 22 12 30 14 14 60 30 22 18 22 28 60 60 38 22 18 34 18 34 22 26 18 30 46 15 30 30 30 30 12 30 30
Max
+125
30 30 30 14 14 30 40 14 16 20 40 20 10 40 30 18 40 20 18 40 30 18 50 20 16 30 30 30 30 30 30 16 10 30 10 12 40 20 14 15 14 17 40 40 22 14 12 20 12 20 14 16 14 18 26 15 30 30 30 30 10 30 30
Capacitance Change
20% 20% 20% 12% 12% 20% 20% 12% 12% 12% 20% 15% 12% 20% 15% 12% 15% 12% 12% 15% 12% 12% 20% 12% 12% 20% 20% 20% 20% 20% 20% 12% 12% 20% 12% 12% 20% 12% 12% 15% 12% 15% 20% 20% 15% 12% 12% 12% 12% 12% 12% 12% 12% 12% 12% 20% 20% 20% 20% 20% 5% 20% 20%
20% 20% 20% 12% 12% 20% 20% 12% 12% 12% 20% 15% 12% 20% 15% 12% 15% 12% 12% 15% 20% 12% 20% 12% 12% 20% 20% 20% 20% 20% 20% 12% 12% 20% 12% 12% 20% 12% 12% 15% 12% 15% 20% 20% 15% 12% 12% 12% 12% 12% 12% 12% 12% 12% 12% 20% 20% 20% 20% 20% 10% 20% 20%
34
9653TCAVOL14E1109E0
E/SV Series

6.8 10 10 10 10 15 15 15 22 22 22 22 22 33 33 33 47 47 47 47 68 68 68 68 100 100 100 100 100 150 150 220 220 220 220 330 330 470 1 1.5 1.5 2.2 2.2 3.3 3.3 3.3 4.7 4.7 4.7 4.7 6.8 6.8 10 10 10 10 15 15 22 22 22 33 33 A2 J P A2 A P A2 A P A2 A B3 B2 A2 A B3 A B3 B2 C A B3 B2 C2 A B3 B2 C2 C B2 C B2 C V D V D D P J P J P J P A2 J P A2 A A2 A P A2 A B2 A2 B3 A B3 B2 B3 B2
Part Number (Bulk)

ESVA20J685M ESVJ0J106M ESVP0J106M ESVA20J106M ESVA0J106M ESVP0J156M ESVA20J156M ESVA0J156M ESVP0J226M ESVA20J226M ESVA0J226M ESVB30J226M ESVB20J226M ESVA20J336M ESVA0J336M ESVB30J336M ESVA0J476M ESVB30J476M ESVB20J476M ESVC0J476M ESVA0J686M ESVB30J686M ESVB20J686M ESVC20J686M ESVA0J107M ESVB30J107M ESVB20J107M ESVC20J107M ESVC0J107M ESVB20J157M ESVC0J157M ESVB20J227M ESVC0J227M ESVV0J227M ESVD0J227M ESVV0J337M ESVD0J337M ESVD0J477M ESVP1A105M ESVJ1A155M ESVP1A155M ESVJ1A225M ESVP1A225M ESVJ1A335M ESVP1A335M ESVA21A335M ESVJ1A475M ESVP1A475M ESVA21A475M ESVA1A475M ESVA21A685M ESVA1A685M ESVP1A106M ESVA21A106M ESVA1A106M ESVB21A106M ESVA21A156M ESVB31A156M ESVA1A226M ESVB31A226M ESVB21A226M ESVB31A336M ESVB21A336M
6.3
10
Leakage Current ( A) Max 0.5 0.6 0.6 0.6 0.6 0.9 0.9 0.9 1.3 1.3 1.3 1.3 1.3 2 2 2 2.9 2.9 2.9 2.9 4.2 4.2 4.2 4.2 6.3 6.3 6.3 6.3 6.3 9.4 9.4 13.8 13.8 13.8 13.8 20.7 20.7 29.6 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.6 1 1 1 1 1.5 1.5 2.2 2.2 2.2 3.3 3.3
DF (%) Max
8 20 20 8 8 20 12 8 20 12 10 8 8 18 12 12 12 12 8 8 30 20 10 10 25 20 12 10 10 12 10 18 14 12 12 14 14 20 10 20 20 20 20 20 20 8 20 20 8 8 8 8 20 8 8 8 12 8 12 8 8 12 8
ESR ()
6.5 8 6 4.5 3.2 5 4 3 4 2.8 3 2 1.6 3 2.5 1.7 2 1.7 1.3 0.9 2 2 1 0.8 2 1.3 0.9 0.8 0.6 1 0.6 1 1.2 0.5 0.5 0.5 0.5 0.3 25 25.5 25 17.5 19 25 13 8 10 6 8 4.5 8 4.5 6 8 3.2 2.4 3 2.7 2.5 1.9 1.4 1.7 1.4
DF (%) Max -55

12 38 30 12 12 30 22 12 38 22 14 12 12 34 22 18 22 18 12 12 60 38 18 14 60 38 22 18 14 22 18 34 26 18 18 26 26 38 15 30 30 30 30 30 30 12 30 30 12 12 12 12 30 12 12 12 22 12 22 12 12 18 12
Max
+125
10 22 30 10 10 30 14 10 22 14 12 10 10 20 14 15 14 15 10 10 40 22 12 12 40 22 14 12 12 14 12 20 16 14 14 16 16 22 15 30 30 30 30 30 30 10 30 30 10 10 10 10 30 10 10 10 14 10 14 10 10 15 10
Capacitance Change
12% 20% 20% 12% 12% 20% 12% 12% 20% 12% 12% 15% 5% 20% 12% 15% 12% 15% 5% 5% 12% 15% 12% 12% 20% 15% 12% 12% 12% 12% 12% 12% 12% 12% 12% 5% 12% 20% 20% 20% 20% 20% 20% 20% 20% 12% 20% 20% 12% 12% 12% 12% 20% 12% 12% 5% 12% 15% 12% 15% 5% 15% 5%
12% 20% 20% 12% 12% 20% 12% 12% 20% 12% 12% 15% 10% 20% 12% 15% 12% 15% 10% 10% 12% 15% 12% 12% 20% 15% 12% 12% 12% 12% 12% 12% 12% 12% 12% 10% 12% 20% 20% 20% 20% 20% 20% 20% 20% 12% 20% 20% 12% 12% 12% 12% 20% 12% 12% 10% 12% 15% 12% 15% 10% 15% 10%
35
9653TCAVOL14E1109E0
E/SV Series

47 47 47 47 68 68 68 100 100 100 100 100 150 150 220 0.47 0.68 1 1 1.5 1.5 2.2 2.2 2.2 2.2 3.3 3.3 3.3 4.7 4.7 6.8 6.8 10 10 10 15 15 22 22 22 33 33 33 47 47 68 68 100 0.47 0.68 1 1.5 2.2 2.2 2.2 3.3 3.3 3.3 4.7 4.7 4.7 4.7 6.8 A B2 C2 C B2 C2 C B2 C2 C V D V D D P P J P J A J P A2 A P A2 A A2 A A B3 A B3 B2 A B2 B3 B2 C B2 C2 C C D C D D A2 A2 A2 A2 P A2 A A2 A B3 A2 A B3 B2 B3
Part Number (Bulk)

ESVA1A476M ESVB21A476M ESVC21A476M ESVC1A476M ESVB21A686M ESVC21A686M ESVC1A686M ESVB21A107M ESVC21A107M ESVC1A107M ESVV1A107M ESVD1A107M ESVV1A157M ESVD1A157M ESVD1A227M ESVP1C474M ESVP1C684M ESVJ1C105M ESVP1C105M ESVJ1C155M ESVA1C155M ESVJ1C225M ESVP1C225M ESVA21C225M ESVA1C225M ESVP1C335M ESVA21C335M ESVA1C335M ESVA21C475M ESVA1C475M ESVA1C685M ESVB31C685M ESVA1C106M ESVB31C106M ESVB21C106M ESVA1C156M ESVB21C156M ESVB31C226M ESVB21C226M ESVC1C226M ESVB21C336M ESVC21C336M ESVC1C336M ESVC1C476M ESVD1C476M ESVC1C686M ESVD1C686M ESVD1C107M ESVA21D474M ESVA21D684M ESVA21D105M ESVA21D155M ESVP1D225M ESVA21D225M ESVA1D225M ESVA21D335M ESVA1D335M ESVB31D335M ESVA21D475M ESVA1D475M ESVB31D475M ESVB21D475M ESVB31D685M
10
16
20
Leakage Current ( A) Max 4.7 4.7 4.7 4.7 6.8 6.8 6.8 10 10 10 10 10 15 15 22 0.5 0.5 0.5 0.5 0.5 0.5 6.8 0.5 0.5 0.5 0.5 0.5 0.5 0.7 0.7 1 1 1.6 1.6 1.6 2.4 2.4 3.5 3.5 3.5 5.2 5.2 5.2 7.5 7.5 10.8 10.8 16 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.9 0.9 0.9 0.9 1.3
DF (%) Max
20 8 8 8 12 10 8 16 10 10 8 8 8 10 12 10 10 10 10 10 4 20 10 6 6 10 8 6 8 6 6 6 8 8 6 12 6 10 6 6 8 6 6 6 6 6 6 8 6 6 6 6 10 6 6 8 6 6 15 6 6 6 6
ESR ()
5 1 1 0.9 0.9 1 0.7 1.4 0.8 0.5 0.5 0.6 0.5 0.6 0.6 35 25 25.5 20 25 6 20 19 10 6 8 7 4.5 4.5 4 4 4.1 3.2 3.5 2 5 2 2.2 2.2 1.5 1.4 1.4 1.1 0.8 0.7 0.7 0.7 0.5 25 15 12 7.4 8 7 6 5 5 3.9 5 5 3 3 3
DF (%) Max -55

36 12 14 12 14 18 12 20 18 18 18 18 18 18 22 15 15 30 15 20 8 30 15 10 10 15 14 10 14 10 10 10 12 14 10 22 10 18 10 10 14 10 10 10 10 16 10 18 10 10 10 10 15 10 10 14 10 10 30 10 10 10 10
Max
+125
24 10 10 10 14 14 10 20 14 12 10 10 10 12 14 15 15 15 15 15 6 30 15 8 8 15 10 8 10 8 8 8 10 10 8 14 8 12 8 8 10 8 8 8 8 10 8 10 8 8 8 8 15 8 8 10 8 8 20 8 8 8 8
Capacitance Change
20% 12% 12% 5% 12% 12% 12% 20% 12% 12% 12% 5% 12% 12% 12% 20% 20% 20% 20% 20% 5% 20% 20% 12% 5% 20% 12% 12% 12% 12% 12% 15% 12% 15% 5% 12% 5% 15% 5% 5% 5% 12% 5% 12% 5% 12% 5% 12% 5% 5% 12% 12% 20% 12% 12% 12% 12% 15% 12% 12% 15% 5% 15%
20% 12% 12% 10% 12% 12% 12% 30% 12% 12% 12% 10% 12% 12% 12% 20% 20% 20% 20% 20% 10% 20% 20% 12% 10% 20% 12% 12% 12% 12% 12% 15% 12% 15% 10% 12% 10% 15% 10% 10% 10% 12% 10% 12% 10% 12% 10% 12% 10% 10% 12% 12% 20% 12% 12% 12% 12% 15% 12% 12% 15% 10% 15%
36
9653TCAVOL14E1109E0
E/SV Series

6.8 10 15 22 22 22 22 33 47 47 0.47 0.68 1 1 1 2.2 3.3 4.7 4.7 6.8 10 10 15 22 33 0.47 0.68 1 1 1.5 2.2 2.2 3.3 3.3 4.7 6.8 10 10 15 B2 B2 C B2 C2 C D D C D A A P A2 A A A B3 B2 B2 C2 C C D D A A A2 A A A B2 B3 B2 C C C D D
Part Number (Bulk)

ESVB21D685M ESVB21D106M ESVC1D156M ESVB21D226M ESVC21D226M ESVC1D226M ESVD1D226M ESVD1D336M ESVC1D476M ESVD1D476M ESVA1E474M ESVA1E684M ESVP1E105M ESVA21E105M ESVA1E105M ESVA1E225M ESVA1E335M ESVB31E475M ESVB21E475M ESVB21E685M ESVC21E106M ESVC1E106M ESVC1E156M ESVD1E226M ESVD1E336M ESVA1V474M ESVA1V684M ESVA21V105M ESVA1V105M ESVA1V155M ESVA1V225M ESVB21V225M ESVB31V335M ESVB21V335M ESVC1V475M ESVC1V685M ESVC1V106M ESVD1V106M ESVD1V156M
20
25
35
Leakage Current ( A) Max 1.3 2 3 4.4 4.4 4.4 4.4 6.6 9.4 9.4 0.5 0.5 0.5 0.5 0.5 0.5 0.8 1.1 1.1 1.7 2.5 2.5 3.7 5.5 8.2 0.5 0.5 0.5 0.5 0.5 0.7 0.7 1.1 1.1 1.6 2.3 3.5 3.5 5.2
DF (%) Max
6 6 6 6 6 6 6 6 6 6 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6
ESR ()
2.8 2.5 1.7 3 1.4 1.4 0.8 0.8 1 0.7 13 9 8 13 8 7 7 3 3 2.5 2 1.5 1.5 0.8 0.7 12 8 13 7 7 5 4 3 3.5 2.2 1.9 1.5 1 0.9
DF (%) Max -55

10 10 10 10 10 10 10 10 10 10 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
Max
+125
8 8 8 8 8 8 8 8 8 8 6 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8
Capacitance Change
5% 5% 5% 20% 12% 12% 5% 5% 12% 5% 5% 5% 20% 12% 5% 12% 12% 15% 5% 5% 12% 5% 12% 5% 5% 5% 5% 12% 12% 12% 12% 5% 15% 5% 5% 5% 5% 5% 5%
10% 10% 10% 20% 12% 12% 10% 10% 12% 10% 10% 10% 20% 12% 10% 12% 12% 15% 10% 10% 12% 10% 12% 10% 10% 10% 10% 12% 12% 12% 12% 10% 15% 10% 10% 10% 10% 10% 10%
37
9653TCAVOL14E1109E0
SV/Z
FEATURES
Series
Low ESR / RoHS Compliant
bLead-free Type. RoHS Compliant. bLow-ESR Type.
bSame Dimension as E/SV series. bHalogen free, Antimony free and Red Phosphorous free resin is applied to the exterior mold resin.
DIMENSIONS [mm]
[A case]
Z
L H Z W2
W1
[B2 case]
L H Z Z W2
W1
W1 H
[C, V, D cases]
Z W2
(Unit: mm)
Case code
B2 C V A
EIA code
3528 6032 3216
L
3.2 0.2 3.5 0.2 6.0 0.2 7.3 0.2 7.3 0.2 6.0 0.2
W1
2.8 0.2 1.6 0.2
W2
2.2 0.1 2.2 0.1 2.2 0.1 2.4 0.1 2.4 0.1 1.2 0.1
H
1.9 0.2 2.5 0.2 2.8 0.2 1.9 0.1 1.4 0.1 1.6 0.2
Z
0.8 0.2 1.3 0.2 1.3 0.2 1.3 0.2 1.3 0.2 0.8 0.2
C2
7343L 7343
3.2 0.2 4.3 0.2 4.3 0.2
3.2 0.2
38
9653TCAVOL14E1109E0
SV/Z Series

F 6.8 10 15 22 33 47 68 100 150 220 330
UR
4V 0G
6.3V 0J A 800 B2 800
10V 1A B2 600
16V 1C
20V 1D
685 106 156 226 336 476 686 107 157 227 337 D 100 V , D 150 , 100 C,D 300 , 140 B2 B2 250 250 C , D C2, C, V, D 150 , 150 150,125,150,100 C , D V,D 125 , 100 150 , 100 V , D D 150 , 100 100 V,D 100 , 100 D 150 C, D 200, 150 D 100
25V 1E C 600 D 250 D 200
UR :Rated Voltage
35V 1V C 600 D 300 D 300
D 200 D 150
*Number : ESR (m)
PART NUMBER SYSTEM

[Bulk]
SVZ D 1C 107 M
Capacitance Tolerance M : 20% Capacitance (pF) First two digits represent significant figures. Third digit specifies number of zeros to follow.
[Tape and Reel]

TE SVZD1C107M 12 R
Packing Orientation R : Cathode on the Side of Sproket Hole Tape width 8 : 8 mm (A, B2 case) 12 : 12 mm (C, V, D cases)
DC rated voltage in volts 0G : 4 V, 0J : 6.3 V, 1A : 10 V, 1C : 16 V 1D : 20 V, 1E : 25 V, 1V : 35 V Case code SV/Z Series
Part number of Bulk Tape and Reel TE : 180mm reel
TL SVZD1C107M 12 R E
Tape and Reel TL : 330mm reel Indicates 330mm reel
39
9653TCAVOL14E1109E0
SV/Z Series
MARKINGS
The standard marking shows capacitance, DC rated voltage, and polarity.

[A case] (ex. 10 F / 6.3 V)
J106
Capacitance Code (pF) DC Rated Voltage Code Polarity
[B2 case] (ex. 22 F / 6.3 V)
6T
Polarity
22
[C2, C, V, D case] (ex. 220 F / 10 V) Polarity
220 10T
[DC Rated Voltage code]

Code Rated Voltage G 4V J 6.3 V A 10 V C 16 V D 20 V E 25 V V 35V
[B2, C2, C, V, D cases production date code]

Y M
2011 2012 2013 2014
a n A N
b p B P
c q C Q
d r D R
e s E S
f t F T
g u G U
h v H V
j w J W
k x K X
l y L Y
m z M Z
40
9653TCAVOL14E1109E0
SV/Z Series
ITEM Operating temperature Rated voltage (V.dc) Derated voltage (V.dc) Surge voltage (V.dc) Capacitance Capacitance tolerance DC Leakage Current (L.C) Dissipation Factor Equivalent Series Resistance Capacitance change 4V 2.5V 5.2V 6.3V 4V 8V 10V 6.3V 13V PERFORMANCE 55 to +125 16V 10V 20V 6.8 F to 330 F 20% or 10% 0.01C V(A) or 0.5A , whichever is greater Refer to Standard Ratings Refer to Standard Ratings DF(%) Lower than initial specification Refer to Standard Ratings Lower than initial specification Refer to Standard Ratings L.C Lower than initial specification 20V 13V 26V 25V 16V 33V
TEST CONDITION Derated voltage at 85 at more 35V 22V 46V at 85 at 125 at 85 at 120 Hz Voltage: Rated voltage for 5min. at 120 Hz at 100 kHz Temperature : 852 Applied voltage : Surge voltage Series resistance : 33 ohm Duration of surge : 305 sec Time between surge : 5.5min. Number of cycle : 1000 Step 1: 252 0 Step 2: 55 3 Step 3: 252 0 Step 4: 125 3 Parts shall be temperature cycled over a temperature range of 55 to +125, five times continuously as follow. 0 Step 1: 55 3 , 303min. Step 2: room temp. , 10 to 15min. 0 Step 3: 125 3 , 303min. Step 4: room temp, 10 to 15min. solder dip : 260, 5sec solder reflow : 260, 10sec at 40 at 90 to 95% RH 500 hour
Surge voltage test
55 Characteristic at high and low temperature +85 +125
Not to exceed 12% Not to exceed +12% Not to exceed +15%
0.1C V(A) or 5A, which ever is greater 0.125C V(A) or 6.25A, which ever is greater
Lower than initial specification Lower than 1.25 times initial specification Lower than initial specification 0 = 1% / 1000 hour
Lower than initial specification Lower than initial specification Lower than 1.25 times initial specification
Endurance
at 85 : Rated voltage at 125 : Derated voltage 2000 hour at 85 : Rated voltage at 125 : Derated voltage 2000 hour
Strength : 4.9N Time : 100.5sec. (two directions)
Reference : Derated voltage (85 to 125C) [UT] = [UR] [UR] [UC] 40 (T85)
[UT] : Derated voltage at operating temperature [UR] : Rated voltage [UC] : Derated voltage at 125C T : Operating temperature
41
9653TCAVOL14E1109E0
SV/Z Series
STANDARD RATINGS
4 220 330 330 10 22 68 100 100 150 150 220 220 330 330 10 47 47 68 100 100 100 100 150 150 220 47 68 68 100 33 47 6.8 15 22 6.8 10 15 D V D A B2 B2 C D C D V D V D B2 C D B2 C2 C V D V D D D C D D D D C D D C D D
Part Number (Bulk)

SVZD0G227M SVZV0G337M SVZD0G337M SVZA0J106M SVZB20J226M SVZB20J686M SVZC0J107M SVZD0J107M SVZC0J157M SVZD0J157M SVZV0J227M SVZD0J227M SVZV0J337M SVZD0J337M SVZB21A106M SVZC1A476M SVZD1A476M SVZB21A686M SVZC21A107M SVZC1A107M SVZV1A107M SVZD1A107M SVZV1A157M SVZD1A157M SVZD1A227M SVZD1C476M SVZC1C686M SVZD1C686M SVZD1C107M SVZD1D336M SVZD1D476M SVZC1E685M SVZD1E156M SVZD1E226M SVZC1V685M SVZD1V106M SVZD1V156M
6.3
10
16
20 25
35
Leakage Current ( A ) Max 8.8 13.2 13.2 0.6 1.3 4.2 6.3 6.3 9.4 9.4 13.8 13.8 20.7 20.7 1 4.7 4.7 6.8 10 10 10 10 15 15 22 7.5 10.8 10.8 16 6.6 9.4 1.7 3.7 5.5 2.3 3.5 5.2
DF (%) Max
8 12 14 8 8 10 10 8 10 8 12 12 14 14 8 8 8 12 10 10 8 8 8 10 12 6 6 6 8 6 6 6 6 6 6 6 6
ESR ( ) Max
DF (%) Max -55

18 18 18 12 12 18 14 12 18 18 18 18 26 26 12 12 12 14 18 18 18 18 14 18 22 10 16 10 18 10 10 10 10 10 10 10 10
+125
10 14 16 10 10 12 12 10 12 10 14 14 16 16 10 10 10 14 14 12 10 10 10 12 14 8 10 8 10 8 8 8 8 8 8 8 8
0.1 0.15 0.1 0.8 0.8 0.25 0.15 0.15 0.125 0.1 0.15 0.1 0.1 0.1 0.6 0.3 0.14 0.25 0.15 0.125 0.15 0.1 0.15 0.1 0.1 0.15 0.2 0.15 0.1 0.2 0.15 0.6 0.25 0.2 0.6 0.3 0.3
Capacitance Change
5% 12% 12% 12% 5% 12% 12% 5% 12% 5% 12% 12% 20% 12% 5% 5% 5% 12% 12% 12% 12% 5% 12% 12% 12% 5% 12% 5% 12% 5% 5% 5% 5% 5% 5% 5% 5%
10% 12% 12% 12% 10% 12% 12% 10% 12% 10% 12% 12% 20% 12% 10% 10% 10% 12% 12% 12% 12% 10% 12% 12% 12% 10% 12% 10% 12% 10% 10% 10% 10% 10% 10% 10% 10%
42
9653TCAVOL14E1109E0
TAPE AND REEL SPECIFICATIONS Plastic Tape Carrier

Unit: mm
Case Code
A0 0.2 1.0 1.4 1.55 1.9 1.9 1.9 3.2 3.25 3.3 3.7 3.7 4.6 4.8
B0 0.2 1.8 2.2 2.3 3.5 3.5 3.5 3.8 3.8 3.8 6.4 6.4 7.7 7.7
K 0.2 1.1 1.4 1.3 1.1 1.4 1.9 1.4 1.7 2.1 1.7 3.0 2.4 3.3
Sprocket hole D0 A0
B0
Emboss
E
J P , P2 P2 *1 A3 A2 (U) A B3 B15 B2 (S) C2 C V D

*1: G/PS series
t K
D1
P1 Feed direction
P2
P0
Unit: mm
Case Code
J P , P2 P2 *1 A3 A2(U) A B3(W) B2(S) C2 C V D B15
W 0.3 F 0.05
E 0.1
P1 0.1 P2 0.05 P0 0.1
D0 + 0.1 0
D1 min.

t
0.2 0.25 0.2
3.5 1.75
4 2 4 1.5
1.0 0.25 0.2
12
5.5
1.5
0.3 0.4 0.3
*1: G/PS series
Packing Orientation
ex. R:Cathode on the side of Sprocket hole

Sprocket hole
+ Feed direction
43
9653TCAVOL14E1109E0
Tape and Reel Specication for Chips
REEL
W1
W2
Unit: mm
Tape Width 8 mm 12 mm 12 mm
A
0 180 + 3
N Min. 50 80
C 0.5 13 13
D 21 0.5 21 1.0
B 0.5 2 2
W1 9.0 1.0 13.0 1.0 14.0 Max.
W2 Max. 11.4 1.0 15.4 1.0 18.5 Max.
R 1 1
3302
Case Code
J P,P2 A3 A2(U) A B3(W) B15 B2(S) C2 V C,D
180 Reel
4000 3000 3000 3000 2000 3000 2500 2000 1000 1000 500
330 Reel

4000 3000 2500
[Quantity Per Reel]
44
9653TCAVOL14E1109E0
NOTES ON USING THE SOLID TANTALUM CAPACITORS

About 90% of the failure mode of the solid tantalum capacitor is short-circuit. Please take surplus for the operating condition.
1.Circuit Design
(1) Reliability
The reliability of the solid tantalum capacitor is heavily inuenced by environmental conditions such as temperature, humidity, shock, vibration, mechanical stresses, and electric stresses, including applied voltage, current, ripple current, transient current and voltage, and frequency. When using solid tantalum capacitors, therefore, provide enough margin so that the reliability of the capacitors is maintained. Voltage and temperature are important parameters when estimating the reliability (eld failure rate). The eld failure rate of a solid tantalum capacitor can be calculated by the following expression if emphasis is placed only on the voltage and temperature:
100 1.0 0.9 0.8 0.7 0.5 0.4 0.3
7 4 2
101
= 0(V/V0) 2
(TT0)/10
Ambient temperature (C)
70 60 50 40 30 20
7 4 2
102
Where : estimated failure rate in actual working condition temperature: T; voltage: V
7 4 2
103
0.2
0: failure rate under rated load (See table below.) temperature: T0; voltage: V0
7 4 2
104 0.1 V
Failure rate level 0 of each series

Series PS/L E/SV F/SV Failure rate level 1% / 1000 h 1% / 1000 h 1% / 1000 h 1% / 1000 h 1% / 1000 h 1% / 1000 h 1% / 1000 h
105 T F
PS/G SV/Z F/PS
G/PS
<Test conditions> Temperature: 85 Voltage: rated voltage RS: 3
This figure graphically indicates ( V/ V0) 3 2 ( TT0)/10 in the expression = 0 (V/V0) 3 2(TT0)/10. By using this figure, the estimated failure rate can be easily calculated. Connect the desired temperature and voltage ratio with a straight line (from the left most vertical axis in the figure to the right most axis) in the figure. The multiple of the failure rate can be obtained at the intersection of the line drawn and the middle vertical axis in the figure. Therefore, = 0 F Where F: multiple of failure rate at given temperature and ratio of working voltage to rated voltage.
Working voltage/rated voltage
80
The figure indicates an operation example under the following conditions: Ambient temperature: 25C Working voltage ratio: 0.3 Where the multiple of the failure rate is F = 4 104 Therefore, estimated failure rate is: = 2 10 -5 4 10 -4 = 8 (FIT) Note: Where 0 = 2%/1000 h
Multiple of failure rate (F)
0.6
45
9653TCAVOL14E1109E0
2. Ripple Current and Ripple Voltage

If ripple current is applied, heat is generated within capacitor by Joules heat (power dissipation) and it may affect to the reliability of the capacitor. (1) Power Dissipation The actual power dissipated in the capacitor is calculated using the formula1.
Dissipation Ratings TABLE 1-1 E/SV,SV/Z,PS/L, TABLE 1-2 F/SV,F/PS,G/PS PS/G series series Maximum Power Maximum Power Case Case Dissipation Dissipation Code Code Watts, 100kHz, at 25 Watts, 100kHz, at 25 0.010 J J 0.010 0.025 P P2 0.025 0.060 A2 A3 0.060 0.075 A 0.075 B3 0.080 B15 0.085 B2 0.090 C2 0.110 C 0.125 V 0.150 D
(
(2)
P = I2ESR......Formula1 P I : Power Dissipation (Watts) : Ripple Current (Arms)
ESR : Equivalent Series Resistance ()
Ripple Current Using P Max from TABLE1, maximum ripple current (Arms) may be determined as follow :
Ripple voltage E is calculated using the Formula3. E = ZI......Formula3
I= K
PMax/ESR KF......Formula2
: Temperature Derating Factor TABLE2 E/SV, F/SV, SV/Z....TABLE2-1,
P/SL, PS/G, F/PS, G/PS....TABLE2-2 F : Frequency Derating Factor......TABLE3 ESR : refer to Ratings
)
Voltage (V)
TABLE 2-1 E/SV, F/SV, SV/Z Series Temp. Temperature Derating Factor K 1 25 1 45 0.9 85 0.4 125 TABLE 2-2 P/SL, PS/G, F/PS, G/PS Series Temp. Temperature Derating Factor K 1 25 1 45 0.9 85 0.4 105
TABLE 3 Frequency Derating Factor F 10kHz 0.80 0.75 100kHz 300kHz 500kHz 1.00 1.00 1.15 1.00 1.00 1.10
(E Z
(3)
: Ripple voltage
: Impedance at specied frequency
Series
Ripple Voltage The ripple voltage which may be applied is limited by three criteria : (a) (b) (c) The power dissipated in the ESR of the capacitor must not exceed the appropriate value specied in TABLE1. The sum of the DC voltage and peak value of the ripple voltage must not exceed the rated voltage. The negative peak value of the ripple voltage must not exceed the permissible reverse voltage value specied in the following section, Reverse Voltage.
1MHz 1.20 1.30
: E/SV, F/SV, SV/Z : PS/L, PS/G, F/PS, G/PS
Time (seconds)
3.
Reverse Voltage
Tantalum capacitor has polarity. Reverse voltage applying will cause increase of leak current and reliability degradation. Please do not apply reverse voltage.
4.
Unsuited circuit and application

When it is used in the circuit like as below, there are possibility to cause failure. a. the circuit which has high sensitivity with leak current. b. the series connection of capacitors to exceed rated voltage.
Conductive polymer tantalum capacitor (NeoCapacitor) are not suite to below circuits either. c. High impedance circuit d. Coupling circuit e. Time constant circuit
46
DC Voltage
Ripple Voltage
9653TCAVOL14E1109E0
Peak Voltage
Rated Voltage
5. Applied Voltage
(1) (2) (3) For general applications, apply 70% or less of the rated voltage to the capacitor. When the capacitor is used in a power line or a low-impedance circuit, keep the applied voltage within 30% (50% max.) of the rated voltage to avoid the adverse inuence of inrush current. For conductive polymer type,NeoCapacitor,apply 80% or less of the rated voltage to the capacitor. Recommended Ratio of Operating Voltage to Rated Voltage
Circuit
Manganese dioxide type E/SV, F/SV, SV/Z series 70% or less within 30% (50% max)
high-impedance low-impedance
(4)
Conductive polymer type (NeoCapacitor) PS/L, PS/G, F/PS, G/PS series Rated Voltage 2.5V, 4V, 6.3V 10V, 16V, 20V, 25V 90% or less 90% or less 80% or less 80% or less
Derated voltage at 85 or more. When using a Chip-type capacitor at a temperature of 85 or higher, calculate reduced voltage UT from the following expression. Note, however, that the ambient temperature must not exceed the maximum operating temperature. The rated voltage ratio is as shown in the gure on the right. Tmax85 Where UR: rated voltage (V)
Rated voltage (%)
UT = UR
URUC
(T85)
100 Approx. 63%.... MnO2 type 80%.... Polymer type
50
UC: derated voltage at Tmax T: operating temperature () Tmax: Maximum Operating temperature MnO2 type E/SV, F/SV, SV/Z ..............................125C
85 Tmax Ambient temperature (C)
Conductive Polymer type PS/L,PS/G,F/PS,G/PS ..........105C

Note: Where series protective resistance of 3/V is 1
As shown in the gure on the right, reliability is increased by inserting a series resistance of at least 3/V into circuits where current ow is momentary (switching circuits, charge/discharge circuits, etc). If the capacitor is in a low-impedance circuit, the voltage applied to the capacitor should be less than 1/2 to 1/3 of the DC rated voltage.
Multiple of failure rate
6. Current (Series Resistance)
10
0.1 0.1 10 1 1 10 100 Series resistance (/V) 0.1 0.01 Current value (A)
7.
In the Case of Short-Circuit

(1) (2)
Manganese oxide tantalum capacitor (conventional tantalum capacitor) is heated and may generate re and may burn depending upon its excess current, time and other factors. Conductive polymer tantalum capacitor (NeoCapacitor) is heated and may generate smoke emission depending upon its excess current, time and other factors. polymer used for electrolyte of NeoCapacitor is superior in insulanting the damaged por( Conductive ) tion compare to manganese oxide (used in conventional tantalum capacitor).
When designing the circuit, provide as much margin as possible to maintain capacitor reliability. When above failure happen by any possibility, please shut off the power immediately. Please do not touch the failed capacitor and move your face to it carelessly to protect burn injury. When smoke get in your eyes and you shuck smoke, please wash out your eyes and gargle.
47
9653TCAVOL14E1109E0
NOTES ON USING THE CHIP TANTALUM CAPACITORS, EXCLUDING NeoCapacitors 1. Mounting
(1) Direct Soldering

Keep the following points in mind when soldering the capacitor by means of jet soldering or dip soldering:
(a)
Temporarily xing resin
Because chip tantalum capacitors are larger and subject to more force than chip multilayer ceramic capacitors or chip resistors, more resin is required to temporarily secure the solid tantalum capacitors. However, if too much resin is used, the resin adhering to the patterns on a printed circuit board may adversely affect the solderability.
(b)
Pattern design
a
(mm)
Case P A2 (U), A B3 (W ), B2 (S) C2, C V, D
a 2.2 2.9 3.0 4.1 5.2
b 1.4 1.7 2.8 2.7 2.9
c 0.7 1.2 1.6 2.4 3.7
The above dimensions are for reference only. If the capacitor is to be mounted by this method, and if the pattern is too small, the solderability may be degraded.
(c)
Temperature and time
Keep the peak temperature and time within the following values: Solder temperature .......................... 260C max. Time ................................................. 5 seconds max.
Whenever possible, perform preheating (at 150 max.) for a smooth temperature prole. To maintain reliability, mount the capacitor at low temperature and in a short time.
(d)
Component layout
If many types of chip components are mounted on a printed circuit board that is to be soldered by means of jet soldering, solderability may not be uniform over the entire board, depending on the layout and density of the components on the board (also take into consideration generation of ux gas). Use resin-based ux. Do not use ux with strong acidity.
(e)
Flux
48
9653TCAVOL14E1109E0
(2) Reow Soldering

Keep the following points in mind when soldering the capacitor in a soldering oven or with a hot plate. The heat stress given by soldering depends on mounted position on PWB mount density, pad design and so on. Please check resistance to soldering prior to actual using.
(a)
Pattern design (in accordance with JEITA RC-2371A)

(mm)
Case
X
G Max. 1.05 1.65 0.5 0.7 0.65
Z Min. 2.05 2.5 1.65
X Min. 0.80 1.0 0.65
Y (reference) 0.5 0.9 0.8 0.5
A3 * P J
J* P2 *
3.25 2.6
1.1
B3 (W), B2 (S) C2, C V, D
A2 (U), A
4.1
2.9
1.4
1.1
8.2
6.9
4.1
3.8
2.9
2.7
2.7
1.5
1.2
2.05
2.0
1.35
1.05
1.05
* F/SV Series only (Conform to JEITA RC-2371A) The above dimensions are recommended. Note that if the pattern is too big, the component may not be mounted in place.
(b)
Temperature and time

Keep the peak temperature and time within the following values: Time ................................................ 10 seconds max. Number of times ............................. 2 times Whenever possible, perform preheating (at 150 max.) for a smooth temperature prole. To maintain reliability, mount the capacitor at low temperature and in a short time. The peak temperature and time shown above are applicable when the capacitor is to be soldered in a soldering oven or with a hot plate. When the capacitor is soldered by means of infrared reow soldering, the internal temperature of the capacitor may rise beyond the surface temperature. Temperature and Time
Manganese dioxide type E/SV, F/SV,SV/Z series
Solder temperature ......................... 260 max.
280
Temperature (C)
260 240 220 200 0
Recommendatory area 10 20 Time (sec)
(3) Using a Soldering Iron

When soldering the capacitor with a soldering iron, controlling the temperature at the tip of the soldering iron is very difcult. However, it is recommended that the following temperature and time be observed to maintain the reliability of the capacitor: Iron temperature ................................350 max. Time ...................................................3 seconds max. Iron power ..........................................30 W max.
49
9653TCAVOL14E1109E0
2.
Cleaning
Generally, several organic solvents are used for ux cleaning of an electronic component after soldering. Many cleaning methods, such as immersion cleaning, rinse cleaning, brush cleaning, shower cleaning, vapor cleaning, and ultrasonic cleaning, are available; cleaning methods may be used alone or two or more may be used in combination. The temperature of the organic solvent may vary from room temperature to several 10, depending on the desired effect. If cleaning is carried out with emphasis placed only on the cleaning effect, however, the marking on the electronic component cleaned may be erased, the appearance of the component may be damaged, and, in the worst case, the component may be functionally damaged. It is therefore recommended that the R series solid tantalum capacitor be cleaned under the following conditions: Recommended conditions of ux cleaning (1) Cleaning solvent .................Chlorosen, isopropyl alcohol (2) Cleaning method ................Shower cleaning, rinse cleaning, vapor cleaning (3) Cleaning time .....................5 minutes max.
Note. Ultrasonic cleaning

This cleaning method is extremely effective for eliminating dust generated by mechanical processes, but may pose problems depending on the condition. An experiment conducted by NEC TOKIN conrmed that the external terminals of the capacitor were cut when it was cleaned with some ultrasonic cleaning machines. The cause of this phenomenon is metal fatigue of the capacitor terminals due to ultrasonic cleaning. To prevent the terminal from being cut, decreasing the output power of the ultrasonic cleaning machine or shortening the cleaning time may be effective. However, it is difcult to specify the cleaning conditions because there are many factors involved,
such as the conversion efciency of the ultrasonic oscillator, transfer efciency of the cleaning bath, difference in cleaning effect depending on the location in the cleaning bath, the size and quantity of the printed circuit boards to be cleaned, and the securing states of the components on the boards. It is therefore recommended that ultrasonic cleaning be avoided as much as possible. If ultrasonic cleaning is essential, make sure through experiments that no abnormalities occur as a result of the cleaning. For further information, consult NEC TOKIN.
3.
(1) (2) (3) (4) (5) (6) (7) (8) (9)
Others
Do not subject the capacitor to excessive vibration and shock. The solderability of the capacitor may be degraded by humidity. Store the capacitor at room temperature (5 to +40) and humidity (40 to 60% RH). Take care that no external force is applied to tape-packaged products (if the packaging material is deformed, the capacitor may not be automatically mounted by a chip mounter). Laser beam mounting is not acceptable. Conrm polarity, nominal capacitance, rated voltage before mounting. Care impact strength of sorbing and populating with mounter. Do not use a fallen product. Do not re-use a dismounted product from board. Capacitor is composed with several organic and metal materials. Scrap the capacitor as industrial waste.
50
9653TCAVOL14E1109E0
NOTES ON USING NeoCapacitor 1. Mounting

This capacitor is designed to be surface mounted by means of reow soldering. (The conditions under which the capacitor should be soldered with a soldering iron are explained in (2) Using a Soldering Iron. Because the capacitor is not designed to be soldered by means of laser beam soldering, VPS, or ow soldering, the conditions for these soldering methods are not explained in this document.
(1) Reow Soldering

Keep the following points in mind when soldering the capacitor in a soldering oven with a hot plate: The heat stress given by soldering depends on mounted position on PWB mount density, pad design and so on. Please check resistance to soldering prior to actual using.
(a) Pattern design (in accordance with JEITA RC-2371A)
Z
(mm)
Case
J P P2 * A3 * A2 (U), A B3 (W), B15, B2 (S) C2, C V, D
G Max.
0.7 0.5 1.05 1.65 1.1 1.4 2.9 4.1
Z Min.
2.5 2.6 2.05 3.25 3.8 4.1 6.9 8.2
X Min.
1.0 1.2 0.8 1.1 1.5 2.7 2.7 2.9
Y (reference)
0.9 1.05 0.5 0.8 1.35 1.35 2.0 2.05
* F/PS, and G/PS Series only (Conform to JEITA RC-2371A)
The above dimensions are recommended. Note that if the pattern is too big, the component may not be mounted in place.
51
9653TCAVOL14E1109E0
(b) Temperature and time

Keep the peak temperature and time within the following recommended conditions. Solder temperature Time Number of times 240C max. 10 seconds max. 2 times
280 Temperature (C) 260 240 220 200
Conductive Polymer type (NeoCapacitor) PS/L, PS/G, G/PS, F/PS series

Area II Area I Recommendatory area
In the case of moisture control condition equivalent to MSL=3. (Refer to JEDEC J-STD-020D.01 Table 5-1 Moisture Sensitivity Levels) Solder temperature 260C max. Time 5 seconds max.
Area II: The ambient atmosphere should be controlled as MSL=3*. Area I: The ambient atmosphere is controlled at room temperature (5 to +40C) and humidity (40 to 60%R.H.) 20
10 Time (sec)
Number of times 2 times
(*):Moisture Control Condition equivalent to MSL=3. After opening the bag, store the capacitor at 30C-60%R.H.max, and mount within 168 Hr. When it is over 168Hr from opening bag, carry out baking before mounting under below condition. Temperature..................50C Time...............................96Hr Do not subject the Reel to excessive external stress so as not to cause strain.
Whenever possible, perform preheating (at 150C max.) for a smooth temperature prole. To maintain reliability, mount the capacitor at low temperature and in a short time. The peak temperature and time shown above are applicable when the capacitor
is to be soldered in a soldering oven or with a hot plate. When the capacitor is soldered by means of infrared reow soldering, the internal temperature of the capacitor may rise beyond the surface temperature. REMARKS Reow condition of NeoCapacitor (PS/G, PS/L, F/PS, G/PS) is affected by moisture controlling. The peak temperature is 240 degree C under none moisture controlling, and it is 260 degree C under moisture controlling as MSL=3.
(2) Using a Soldering Iron

When soldering the capacitor with a soldering iron, controlling the temperature at the tip of the soldering iron is very difcult. However, it is recommended that the following temperature and time be observed to maintain the reliability of the capacitor: Iron temperature 350C max. Time 3 seconds max. Iron power 30 W max.
2. Cleaning
Generally, several organic solvents are used for ux cleaning of an electronic component after soldering. Many cleaning methods, such as immersion cleaning, rinse cleaning, brush cleaning, shower cleaning, vapor cleaning, and ultrasonic cleaning, are available, with may be used alone or in combination. The temperature of the organic solvent may vary from room temperature to several 10C, depending on the desired effect. If cleaning is carried out with emphasis placed only on the cleaning effect, however, the marking on the electronic component cleaned may be erased, the appearance of the component may be damaged, and, in the worst case, the component may be functionally damaged. It is therefore recommended that the NeoCapacitor be cleaned under the following conditions:
[Recommended conditions of ux cleaning]

(1) Cleaning solvent Isopropyl alcohol (2) Cleaning method Shower cleaning, rinse cleaning, vapor cleaning (3) Cleaning time 5 minutes max.
Note: Ultrasonic cleaning

This cleaning method is extremely effective for eliminating dust generated by mechanical processes, but may pose problems, depending on the condition. An experiment conducted by NEC TOKIN conrmed that the external terminals of the capacitor were cut when it was cleaned with some ultrasonic cleaning machines. The cause of this phenomenon is metal fatigue of the capacitor terminals due to ultrasonic cleaning. To prevent the terminal from being cut, decreasing the output power of the ultrasonic cleaning machine or decreasing the cleaning time may be effective. However, it is difcult to specify safe cleaning conditions because
52
9653TCAVOL14E1109E0
there are many factors involved, such as the conversion efciency of the ultrasonic oscillator, transfer efciency of the cleaning bath, difference in cleaning effect depending on the location in the cleaning bath, the size and quantity of the printed circuit boards to be cleaned, and the securing states of the components on the boards. It is therefore recommended that ultrasonic cleaning be avoided as much as possible. If ultrasonic cleaning is essential, make sure through experiments that no abnormalities occur as a result of the cleaning. For further information, contact NEC TOKIN.
3. Long term using under high temperature atmosphere

Even If NeoCapacitor is used within a rated condition, ESR and dissipation factor increase and capacitance decreases little by little due to chemical and structural change of conductive polymer used for cathode. These characteristics change may occur within upper category temperature, rated voltage and specied mechanical strength. In order to draw out best performance of NeoCapacitor, please pay sufcient attention to your circuit design.
4. Others
(1) Storage a. The solderability of the capacitor may be degraded by humidity. Store the capacitor at room temperature (-5 to +40C) and humidity (40 to 60% RH). b. Take care that no external force is applied to tape-packaged products (if the packaging material is deformed, the capacitor may not be automatically mounted by a chip mounter). c. In the case of long-term storage, there are possibility that increasing of leakage current is occurred. In this case we recommend to leave the capacitor applying DC rated voltage through series resistance 1 k ohm at 1 hour- 85 to 105 degree C. (2) Using surroundings Do not use under surroundings like as below. a. under direct sunlight b. attach water, salted water and oil directly c. be subjected high humidity to cause dew condensation on the surface of product d. be permeated with acid gas (hydrogen sulfide, sulfurous, chlorine) and alkali gas (ammonium etc.)
Do not subject the capacitor to excessive vibration and shock. (3) Scrap Capacitor is composed with several organic and metal materials. Scrap the capacitor as industrial waste.
53
9653TCAVOL14E1109E0
Environmental Conformance
- Environmental Philosophy In all domains of company activities, NEC TOKIN promotes activities for global environmental protection by pursuing technologies and production in consideration of environment.
- Environmental conformance of Product The products described in this catalog have below environmental conformance. Conform to Lead free and EU RoHS directive (2002/95/EC) Restricted substances
Cadmium and cadmium compound Lead and lead compound Mercury and mercury compound Hexavalent chromium Polybrominated biphenyl (PBBs)
Polybrominated diphenyl ether (PBDEs)
Halogen free, Antimony free, Red phosphorous free resin is applied to exterior moldresin. Halogen free specification*1 Chlorine (Cl) content: less than 0.9 wt% (900 ppm) Bromine (Br) content: less than 0.9 wt% (900 ppm) Total content of Cl and Br: less than 1.5wt% (1500 ppm) Antimony free specification Antimony (Sb) content: less than 0.9wt% (900 ppm) Antimony trioxide (Sb2O3): less than 0.1wt% (1000 ppm) Red phosphorous free specification Red phosphorous content: less than 0.1wt% (1000 ppm)
*1: except Fluorine (F), Iodine (I), Astatine (At)
*2: Please ask to our sales department for more detail information for above and the other environmental substances.
54
9653TCAVOL14E1109E0
CAUTIONS
The information in this document is based on documents issued in September. 2011 at the latest. The information is subject to change without notice. For actual design in, request shipment specication, for the latest specications of capacitor. The contents of this catalog is for guarantee of property and quality of product it self. Customer must check the results of evaluation after mounting in customer set and line before using capacitor. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC TOKIN Corporation. NEC TOKIN Corporation assumes no responsibility for any errors which may appear in this document. NEC TOKIN Corporation does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied, or otherwise, is granted under any patents, copyrights, or other intellectual property rights of NEC TOKIN Corporation or others. While NEC TOKIN Corporation has been making a continuous effort to enhance the reliability of its electronic components, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC TOKIN electronic component, customers must incorporate sufcient safety measures in its design, such as redundancy, re-containment, and anti-failure features. NEC TOKIN devices are classied into the following three quality grades: "Standard," "Special," and "Specic." The Specic quality grade applies only to devices developed based on a customer-designated quality assurance program for a specic application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard : Computers, ofce equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment, and industrial robots Special : Transportation equipment (automobiles, trains, ships, etc.), trafc control systems, anti-disaster systems, anti-crime systems, safety equipment, and medical equip ment (not specically designed for life support) Specic : Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems, or medical equipment for life support, etc. The quality grade of NEC TOKIN devices is "Standard" unless otherwise specied in NEC TOKIN's data sheets or data books. If customers intend to use NEC TOKIN devices for applications other than those specied for Standard quality grade, they should contact an NEC TOKIN sales representative in advance. When the products are exported out of Japan, the export procedure thereof shall comply with Foreign Exchange and Foreign Trade Act and all applicable laws, regulations and rules of Japan. (Note) (1) "NEC TOKIN" as used in this statement means NEC TOKIN Corporation and also includes its majority-owned subsidiaries. (2) "NEC TOKIN electronic component products" means any electronic component product developed or manufactured by or for NEC TOKIN (as dened above).
55
9653TCAVOL14E1109E0

Capacitors

Uploaded by

Copyright:

Available Formats

Capacitors

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Capacitors

Uploaded by

Copyright:

Available Formats

Vol.

Correct Use of Tantalum Chip Capacitors

NEC TOKIN offers the latest technology

Environmental Conformance ......................................................................................................54 3

TANTALUM CHIP CAPACITORS

Ultra-low ESR (Single digit ESR)

Conductive Polymer Capacitor

Conductive polymer TCNQ (organic semiconductor) Manganese dioxide (MnO 2) Electrolyte

Anode (tantalum) Dielectric (tantalum oxide)

Conductive glue Silver paste Graphite layer Conductive polymer

Conductive Polymer type

Single Digit ESR / RoHS Compliant

L 3.5 0.2 7.3 0.2 7.3 0.2

H 1.9 0.1 1.9 0.1 2.8 0.2

Z 0.8 0.2 1.3 0.2 1.3 0.2

2.8 0.2 4.3 0.2 4.3 0.2

2.2 0.1 2.4 0.2 2.4 0.2

STANDARD C-V VALUE REFERENCE BY CASE CODE

PART NUMBER SYSTEM

[Tape and Reel]

DC Rated Voltage in volts Case code PS/G Series

[Rated voltage and capacitance]

eJ8 eN8 eS8 eW8

[Production date code]

2011 2012 2013 2014

NOTE: Production date code will resume beginning in 2015.

Conductive Polymer type

Packing Orientation R: Cathode on the side of Sproket Hole

Test Conditions : Conform to IEC 60384-1

PERFORMANCE -55 to +105 4V 3.3V 5.2V 220 F to 680 F 20% at 85

Surge voltage test

Refer to Standard Ratings

Characteristic at high and low temperature

from 0 to -20% from 0 to +50%

Lower than 1.5 times initial specification

Step 1: 252 0 Step 2: -55 -3 Step 3: 252 0 Step 4: 105 -3

Rapid change of temperature

Refer to Standard Ratings

Lower than initial specification

Lower than initial specification

Resistance to Soldering heat Damp heat

Refer to Standard Ratings from +30% to -20%

Refer to Standard Ratings Refer to Standard Ratings

Failure Rate Terminal Strength Permissible ripple current Others

*1: Measure frequency : 300kHz, none: 100 kHz

FREQUENCY CHARACTERISTICS (reference)

Conductive Polymer type

Ultra Low ESR / RoHS Compliant

bLead-free Type. RoHS Compliant. bUltra-Low ESR.

[J, P, A2, A cases]

[B3, B15, B2 cases]

STANDARD C-V VALUE REFERENCE BY CASE CODE

A, B3, B2, C2, C B3, B2, C2, C, V, D

PART NUMBER SYSTEM

[Tape and Reel]

Indicates 330mm reel

Conductive Polymer type

[J case] (ex. 4.7 F / 6.3 V)

[J case Marking Code]

[P case Marking Code]