N/W

SLNo Description Qty Unit Rate

1 CARRIAGE OF MATERIALS
1.1 Carriage of Materials by mechanical transport including
loading, unloading and stacking :
1.1.1 Earth Lead - 1 Km
3500 cum
2 E A R T H W O R K
2.1 Earth work in rough excavation, banking excavated earth
in layers not exceeding 20 cm in depth, breaking clods
watering, rolling each layer with tonne roller or
wooden or steel rammers, and rolling every 3rd and top-
most layer with power roller of minimum 8 tonnes and
dressing up in embankments for roads, flood banks,
marginal banks and guide banks or filling up ground
depressions, lead upto 50 m and lift upto 1.5 m :
2.1.1 All kinds of soil
1300 cum
2.2 Banking excavated earth in layers not exceeding 20 cm. in
depth, breaking clods, watering, rolling each layer with
tonne roller, or wooden or steel rammers, and rolling
every 3rd and top-most layer with power roller of
minimum 8 tonnes and dressing up, in embankments for
roads, flood banks, marginal banks, and guide banks etc.,
lead upto 50 m and lift upto 1.5 m.
2.2.1 All kinds of soil
9500 cum
2.3 Earth work in excavation by mechanical means (Hydraulic
excavator )/ manual means over areas (exceeding 30cm in
depth. 1.5m in width as well as 10 sqm on plan) including
disposal of excavated earth, lead upto 50m and lift upto
1.5m, disposed earth to be levelled and neatly dressed.
Name of the Firm
SCHEDULE OF QUANTITY
Construction of Bituminous approach road from G.T. road to Chandel Gate i/c widening of existing Air
Strip Road
INDIAN INSTITUTE OF TECHNOLOGY KANPUR
INSTITUTE WORKS DEPARTMENT
DIVISION -I
NIT No.- 13/C/D1/2013-14/01
2.3.1 All kinds of soil
2200 cum
2.4 Earth work in excavation by mechanical means (Hydraulic
Excavator )/ manual means in foundation trenches or
drains (not exceeding 1.5 m in width or 10 sqm on plan)
including dressing of sides and ramming of bottoms, lift
upto 1.5 m, including getting out the excavated soil and
disposal of surplus excavated soil as directed, within a
lead of 50 m.
2.4.1 All kinds of soil.
250 cum
2.5 Excavating trenches of required width for pipes, cables,
etc including excavation for sockets, and dressing of
sides, ramming of bottoms, depth upto 1.5 m including
getting out the excavated soil, and then returning the soil
as required, in layers not exceeding 20 cm in depth
including consolidating each deposited layer by ramming,
watering, etc. and disposing of surplus excavated soil as
directed, within a lead of 50 m :
2.5.1 All kinds of soil
2.5.1.1Pipes, cables etc. exceeding 80 mm dia. but not exceeding
300 mm dia. 105 metre
2.6 Filling available excavated earth (excluding rock) in
trenches, plinth, sides of foundations etc. in layers not
exceeding 20cm in depth, consolidating each deposited
layer by ramming and watering, lead up to 50 m and lift
upto 1.5 m.
250 cum
2.7 Clearing jungle including uprooting of rank vegetation,
grass, brush wood, trees and saplings of girth upto 30 cm
measured at a height of 1 m above ground level and
removal of rubbish upto a distance of 50 m outside the
periphery of the area cleared.
15000 100 sqm
3 C O N C R E T E W O R K
3.1 Providing and laying in position cement concrete of
specified grade excluding the cost of centring and
shuttering - All work upto plinth level :
3.1.1 1:5:10 (1 cement : 5 coarse sand : 10 graded Brick
aggregate 40 mm nominal size) 55 cum
3.2 Providing and laying cement concrete in retaining walls,
return walls, walls (any thickness) including attached
pilasters, columns, piers, abutments, pillars, posts, struts,
buttresses, string or lacing courses, parapets, coping, bed
blocks, anchor blocks, plain window sills, fillets, sunken
floor, etc., up to floor five level, excluding the cost of
centering, shuttering and finishing :
3.2.1 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) 0.25 cum
4 REINFORCED CEMENT CONCRETE
4.1 Centring and shuttering including strutting, propping etc.
and removal of form for :
4.1.1 Suspended floors, roofs, landings, balconies and access
platform. 80 sqm
4.2 Steel reinforcement for R.C.C. work including
straightening, cutting, bending, placing in position and
binding all complete upto plinth level.
4.2.1 Thermo-Mechanically Treated bars.
4000 kg
4.3 Add for using extra cement in the items of design mix
over and above the specified cement content therein. 16 quintal
4.4 Providing and laying in position ready mixed M-25 grade
concrete for reinforced cement concrete work, using
cement content as per approved design mix and
manufactured in fully automatic batching plant and
transported to site of work in transit mixer for all leads,
having continuous agitated mixer, manufactured as per
mix design of specified grade for reinforced cement
concrete work, including pumping of R.M.C. from transit
mixer to site of laying, excluding the cost of centering,
shuttering, finishing and reinforcement, including cost of
admixtures in recommended proportions as per IS : 9103
to accelerate / retard setting of concrete, improve
workability without impairing strength and durability as
per direction of the Engineer - in - charge.
(NOTE- 1) Cement content considered in this item is @
330 kg/cum. Excess/ less cement used as per design mix is
payable/ recoverable separately)
4.4.1 All works upto plinth level.
32 cum
5 B R I C K W O R K
5.1 Brick work with common burnt clay F.P.S. (non modular)
bricks of class designation 7.5 in foundation and plinth in:
5.1.1 Cement mortar 1:6 (1 cement : 6 coarse sand)
100 cum
5.2 Brick work with common burnt clay modular bricks of
class designation 7.5 in foundation and plinth in:
5.2.1 Cement Mortar 1:6 (1 cement : 6 coarse sand).
5 cum
5.3 Brick edging 7cm wide 11.4cm. deep to plinth protection
with common burnt clay F.P.S. (non modular) bricks of
class designation 7.5 including grouting with cement
2215 metre
6 F I N I S H I N G
6.1 12 mm cement plaster of mix :
6.1.1 1:6 (1 cement : 6 coarse sand)
160 sqm
6.2 15 mm cement plaster on rough side of single or half brick
wall of mix :
6.2.1 1:6 (1 cement : 6 coarse sand)
20 sqm
6.3 6 mm cement plaster of mix :
6.3.1 1:3 (1 cement : 3 fine sand)
90 sqm
7 R O A D W O R K
7.1 Supplying and stacking at site.
7.1.1 90 mm to 45 mm size stone aggregate.
1285 cum
7.1.2 63 mm to 45 mm size stone aggregate.
860 cum
7.1.3 53 mm to 22.4 mm size stone aggregate.
860 cum
7.1.4 Stone screening 13.2 mm nominal size (Type A).
210 cum
7.1.5 Stone screening 11.2 mm nominal size (Type B).
210 cum
7.1.6 Red bajri
235 cum
7.2 Laying, spreading and compacting stone aggregate of
specified sizes to WBM specifications in uniform
thickness, hand picking, rolling with 3 wheeled road /
vibratory roller 8-10 tonne capacity in stages to proper
grade and camber, applying and brooming requisite type
of screening / binding material to fill up interstices of
coarse aggregate, watering and compacting to the
required density.
2350 cum
7.3 Providing and applying tack coat using hot straight run
bitumen of grade VG - 10 including heating the bitumen,
spraying the bitumen with mechanically operated spray
unit fitted on bitumen boiler, cleaning and preparing the
existing road surface as per specifications:
7.3.1 On W.B.M. @ 0.75 Kg / sqm.
6700 sqm
7.3.2 On bituminous surface @ 0.50 Kg / sqm.
18750 sqm
7.4 2 cm premix carpet surfacing with 1.8 cu.m. and 0.90
cu.m. of stone chippings of 13.2 mm size and 11.2 mm
size respectively per 100 sq.m. and 52 kg. and 56 kg. of
hot bitumen per cu.m. of stone chippings of 13.2 mm and
11.2 mm size respectively including a tack coat with hot
straight run bitumen including consolida-tion with road
roller of 6 to 9 tonne capacity etc. com-plete: (tack coat
to be paid for separately).
7.4.1 With paving Asphalt grade VG-30with no solvent
6700 sqm
7.4 Providing and laying Dense Graded Bituminous Macadam
using crushed stone aggregates of specified grading,
premixed with bituminous binder and filler, transporting
the hot mix to work site by tippers, laying with paver
finisher equiped with electronic sensor to the required
grade, level and alignment and rolling with smooth
wheeled, vibratory and tandem rollers as per
specifications to achieve the desired compaction and
density, complete as per specificatons and directions of
Engineer-in-Charge.
7.4.1 50 to 100 mm average compacted thickness with bitumen
of grade VG-30 @5% (percentage by weight of total mix)
and lime filler @ 2% (percentage by weight of Aggregate)
prepared in Batch Type Hot Mix Plant of 100-120 TPH
capacity. 450 cum
7.5 Providing and laying Bituminous concrete using crushed
stone aggregates of specified grading, premixed with
bituminous binder and filler, transporting the hot mix to
work site by tippers, laying with paver finisher equiped
with electronic sensor to the required grade, level and
alignment and rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction and
density as per specification, complete and as per
directions of Engineer-in-Charge.
7.5.1 40/50 mm compacted thickness with bitumen of grade
VG-30 @5.5% (percentage by weight of total mix) and
lime filler @ 3% (percentage by weight of Aggregate)
prepared in Batch Type Hot Mix Plant of 100-120 TPH
capacity.
350 cum
7.6 Providing and applying 2.5mm thick road marking strips
(retro-reflective) of specified shade/ colour using hot
thermoplastic material by fully/ semi automatic
thermoplastic paint applicator machine fitted with profile
shoe, glass beads dispenser, propane tank heater and
profile shoe heater, driven by experienced operator on
road surface including cost of material, labour ,T&P,
cleaning the road surface of all dirt, seals, oil, grease and
foreign material etc. complete as per direction of
Engineer-in-charge and accordance with applicable
specifications.
650 sqm
8 D R A I N A G E
8.1 Providing and laying non-pressure NP2 class (light duty)
R.C.C. pipes with collars jointed with stiff mixture of
cement mortar in the proportion of 1:2 (1 cement : 2 fine
sand) including testing of joints etc. complete :
8.1.1 450 mm dia. R.C.C. pipe
80 metre
8.1.2 900 mm dia. R.C.C. pipe
25 metre
9 HORTICULTURE & LANDSCAPING
9.1 Supplying and stacking of good earth at site including
royalty and carriage up to 1km (earth measured in stacks
will be reduced by 20% for payment).
6000 cum
10 MINOR CIVIL MAINTENANCE WORK
10.1 Extra for carriage of good earth beyond the initial lead of
1Km, as taken in respective item & lead upto 20 Km. 6000 Cum
Total
Amount
0
0
0
SCHEDULE OF QUANTITY
Construction of Bituminous approach road from G.T. road to Chandel Gate i/c widening of existing Air
Strip Road
INDIAN INSTITUTE OF TECHNOLOGY KANPUR
INSTITUTE WORKS DEPARTMENT
DIVISION -I
NIT No.- 13/C/D1/2013-14/01
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0