Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

EmbeddedSystemsEngineeringJAN FEB2014

Download as pdf or txt
Download as pdf or txt
You are on page 1of 52

COMPUTING SOLUTIONS

SIE Comput i ng Sol ut i ons | 10 Mupac Dri ve | Brockt on, MA 02301 | 508-588-6110
sie-cs.com
Enclosures
Backplanes
System Integration
& Custom Solutions
cPCI
VME
Open VPX
xTCA
mastering demanding environments
SIE_FP_Engineers_Guide_Trans.indd 1 5/20/13 4:23 PM
For more information about the F6482 Series, or to download product collateral and software, please visit www.zilog.com. Design With Freedom
The F6482 Series Development Kit
is a complete development solution containing the
following tools:
F6482 Series Development Board
USB SmartCable (for connecting the PC to the F6482
Series Development Board)
USB A to Mini B cable
RS-232 interface module
Introducing Zilogs Z8 Encore! XP
F6482 Series of Flash Microcontrollers!
Based on Zilogs advanced 8-bit eZ8 CPU core, these MCUs support
1.8 V to 3.6 V low-voltage operation with extremely low Active, Halt, and Stop Mode currents
Z8F64820100ZCOG
Wired/Wireless Keypads
Utility Metering
Battery Powered Sensors
I/O
67
51
52
36
26
UART
2
1
2
2
1
ESPI
2
2
2
1
1
ADC
12
8
12
10
9
USB
1
0
1
1
1
LCD
1
1
0
0
0
128B
NVDS
0
0
0
0
0
Register
RAM
3.75 KB
3.75 KB
3.75 KB
3.75 KB
3.75 KB
Flash
64 KB
64 KB
Part
Z8F6482
Z8F6481
I
2
C
1
1
1
1
1
Package
80-Pin LQFP
64-Pin LQFP
64-Pin LQFP
44-Pin LQFP
32-Pin QFN
Part Number
Z8F6482AT024XK
Z8F6481AR024XK
Z8F6481AN024XK
Z8F6481QK024XK
Z8F6482AR024XK
Visit the Zilog website for additional parts included in this Series.
APPLICATIONS:
Battery Powered Sensors
Wired/Wireless Keypads
PIR Motion Detection
Lighting Control
Safety and Security
Utility Metering
Digital Power Supervisory
Hand Held Electronics
Wireless Controller
LCD Keypads
FEATURES:
24MHz eZ8 CPU core
16KB, 32KB, 60KB or 64KB Flash memory
2KB or 3.75KB internal RAM
Two Enhanced Serial Peripheral
Interface (SPI) controllers
I
2
C controller which supports
Master/Slave modes
Watchdog Timer (WDT)
32-, 44-, 64-, and 80-pin packages
40C to +85C (extended) operating
temperature range
And many more!
Z8F6482 Series Block Diagram
Internal Bus
RC Oscillator
Real-Time Clock
Multi-Channel
Timer
UART/1
2
C/ESPI
LCD Controller
AES 128
Event System
Temp. Sensor
12-Bit ADC
12-Bit DAC
2 Op Amps
2 Comparators
3 16-Bit Enhanced
Timers
Watchdog Timer
4-Channel DMA
3.75KB Register File
Interrupt
Controller
Ports
A-J
Reset
Control
USB
FS
Clock System
OCD
64 KB
Flash
Z8 Encore!
CPU
2 EMBEDDED SYSTEMS ENGINEERING February 2014
FROM THE EDITOR
Y
oure holding the frst edition of a rare event: the launch of a new print maga-
zine. Tis one is all about embedded systems, which according to every tech
analyst frm on the planet, already makes up the lions share of the electronics
market. Tat conclusion gets me all warm and fuzzy because Ive for years argued
that embedded will become dominant. As PC sales falter and telecom gets con-
strained by CAPEX, the race to make every device smart and connect it to the
cloud is driving the embedded innovation explosion.
We see an opportunity to supplement
our existing technology coverage of
market segments like Smart Energy
and Transportation with the kind of
systems know-how that makes those
systems smart, secure and increas-
ingly inter-connected. Our popular
EECatalog Resource Guides (available
in print and on nearly 30 dedicated
digital channel) will continue to pro-
vide both editor-written and editor-
audited technical articles giving you
insight on hardware, software and
systems design as well as sponsored
literature to help our readers make
design decisions.
What about the death of print media,
you ask? Our concept for ESE maga-
zine came from a napkin-like brain-
storming session. Devs and designers
still like to thumb through paper and
discover things they didnt know existed.
Well publish six issues of Embedded
Systems Engineering each year loaded with technical articles. In addition, our
digital channels and blogs will publish hundreds more useful articles, columns,
tips and guest editorials to help you evolve your own designs and grow your
knowledge (and career).
Embedded is where the market is at. Embedded Systems Engineering will help you
get there. Tanks for reading. Please drop me a note with suggestions.
Chris A. Ciufo, Editor-in-Chief
cciufo@extensionmedia.com
Embedded Systems Engineers is published by Extension Media
LLC, 1786 18th Street, San Francisco, CA 94107. Copyright 2014
by Extension Media LLC. All rights reserved. Printed in the U.S.
Vice President & Publisher
Clair Bright
Editorial
Vice President & Chief Content Manager
John Blyler
jblyler@extensionmedia.com
(503) 614-1082
Managing Editor
Cheryl Coup
ccoupe@extensionmedia.com
Editor-in-Chief
Chris Ciufo
cciufo@extensionmedia.com
Contributing Editor
Caroline Hayes
Creative/Production
Production Manager
Spryte Heithecker
Graphic Designers
Nicky Jacobson
Jacob Ewing
Media Coordinator
Yishian Yao
Senior Web Developer
Slava Dotsenko
Mariam Moattari
Advertising / Reprint Sales
Vice President, Sales
Embedded Electronics Media Group
Clair Bright
cbright@extensionmedia.com
(415) 255-0390 ext. 15
Sales Manager
Michael Cloward
mcloward@extensionmedia.com
(415) 255-0390 ext. 17
Marketing/Circulation
Jenna Johnson
To Subscribe
www.eecatalog.com
Extension Media, LLC Corporate Office
President and Publisher
Vince Ridley
vridley@extensionmedia.com
(415) 255-0390 ext. 18
Vice President & Publisher
Clair Bright
cbright@extensionmedia.com
Vice President, Business Development
Melissa Sterling
msterling@extensionmedia.com
Human Resources / Administration
Rachael Evans
Special Thanks to Our Sponsors
Welcome to Embedded
Systems Engineering
Guiding embedded designers on systems, technology and software.
By Chris A. Ciufo, Editor-in-Chief
Embedded Systems
Engineering 2014
www.embeddedsystemsengineering.com
Our napkin-like brainstorming session revealed the
need for a systems-level magazine.
May 7-8, 2014
Hyatt Regency Santa Clara, CA
Two full days of keynotes, training sessions and
panel discussions. Topics covered include:
Adopting legacy industrial
connectivity solutions
Communication gateways
Differentiating Greenfield and Brownfield
Embedded cloud computing
Semiconductor technologies of the future for IoT
Making money with the Internet of Things
Networking, LTE equipment, and Femtocells
Security
Ultra-low power microcontrollers
Supported by Industry leaders:
PLATINUM SPONSORS
INDUSTRY SPONSORS
Resolving the Technical and Business Challenges
of Getting Connected to the Internet of Things
Plan now. Come to the Internet of Things Developers Conference 2014!
Register today at IoT-devcon.com
4 EMBEDDED SYSTEMS ENGINEERING February 2014
IN THIS ISSUE
By Rob Pettigrew and Brian Carr,
Embedded Computing, Emerson
Network Power
Features
COVER STORY
SoC FPGA Relies on Many Cores & 14 nm Tri-Gate Process
By Chris A. Ciufo, Editor-in-Chief 8
Automotive Ethernet: No Simple Answers
By Cheryl Coup, Managing Editor 12
Departments
From the Editor 2
Latest Trends & Analysis 5
Insight 6
Transportation
Growth in U.S. Rail Offers New Opportunities for Embedded System Designers
By Barbara Schmitz, MEN Mikro Elektronik 15
Mobile Resource ManagementAdvertorial
By Advantech 17
MISRA C:2012 : Ideal for Life-and-Death Applications
By Chris Tapp and Mark Pitchford, LDRA 23
Smart Antennas Drive Evolution in M2M and Automotive Applications
By Jason Furr and Vidhya Dharmarajan, Laird Technologies 29
Product Showcases
Hardware
Boards
MEN Micro Inc. 31
Enclosures
SIE Computing Solutions 32, 33
Full-up Systems
Axiomtek 34
Smart Energy
Energy Harvesting Trends
By Christian DeFeo, Newark element14 35
Smart Monitoring Improves Distribution-Grid Reliability
By David Andeen, Maxim Integrated 38
Data Concentrators Are Key to Engineering a Smarter Grid
By James Hao, Texas Instruments (TI) 43
Product Showcases
Boards and Modules
Industrial
Axiomtek 47
Network/Communication
Zilog, Inc. 48
CONTENT
www.embeddedsystemsengineering.com EMBEDDED SYSTEMS ENGINEERING 5
INDUSTRY RESEARCH
01. Semiconductor Industry Posts
Record Sales in 2013
Global sales increase 4.8 Percent in 2013,
reaching highest-ever total of $305.6 Billion
Te Semiconductor Industry Association
(SIA) announced that worldwide semi-
conductor sales for 2013 reached $305.6
billion, the industrys highest-ever annual
total and an increase of 4.8 percent from
the 2012 total of $291.6 billion. Global
sales for the month of December 2013
reached $26.6 billion, marking the stron-
gest December on record, while December
sales in the Americas increased 17.3 per-
cent year-over-year. Fourth quarter global
sales of $79.9 billion were 7.7 percent
higher than the total of $74.2 billion from
the fourth quarter of 2012. Total sales for
the year narrowly exceeded expectations
from the World Semiconductor Trade
Statistics (WSTS) organizations industry
forecast. All monthly sales numbers are
compiled by WSTS and represent a three-
month moving average.
02. Global Production of Electric
Vehicles to Surge by 67 Percent
This Year
Driven by tighter emission standards in
Europe, worldwide production of electric
vehicles (EVs) will soar by 67 percent
this year, according to IHS Automotive,
driven by Polk.
The huge increase in the EV market this
year contrasts with the 3.6 percent rise
in global manufacturing of all motor
vehicles expected in 2014.
03. After a Strong December, LCD
Panel Market to Moderate in Q1
The market for large-sized liquid-
crystal display (LCD) panels is set for
a moderate seasonal decline in the first
quarter after a busy end-of-year in 2013
that saw record shipments for TV and
tablet panels, according to a new report
from IHS Technology.
LATEST
TRENDS &
ANALYSIS
04. Tablet Processor Chip Market
to Surge by 23 Percent This Year,
Attracting Intel and Chinese Rivals
Strong growth in the processor market
for tablet devices this year and beyond
will draw increasing competition from
suppliers eager to throw their hat into
the ring, including the likes of giant chip-
maker Intel, according to a new report
from IHS Technology (NYSE: IHS).
05. 4G Smartphone Market in Chi-
na Set for Explosive 1,500 Percent
Growth This Year
Chinas domestic market for 4G smart-
phones is poised for a massive liftof this
year as shipments grow sixteenfold from
2013 levels, according to a new report
from IHS Technology (NYSE: IHS).
Shipments in 2014 of 4G smartphones
within China are forecast to reach 72.4
million units, up nearly 1,500 percent
from just 4.6 million last year, with the
market expected to take of after the
second half. It will be the frst big year
for 4G smartphones in only its second
year in the country, up from a practi-
cally nonexistent base two years ago.
For the next few years the 4G smartphone
market in China will see unstoppable
growth, doubling in shipments next year
to 144.1 million units, rising another
53 percent to 219.8 million, and then
ending 2017 at 298.5 million units. Te
fndings are contained in the report
China Smartphone Market Enters 4G
Era, from the China Electronics Supply
Chains service of IHS.
06.Top Healthcare Technology
Trend Predictions for 2014
Healthcare expenditure containment
continues to be the main focus of health-
care systems globally. However, the key
question facing healthcare institutions is
whether this will be done through short
term cost cutting or through invest-
ment in longterm solutions. Healthcare
funding uncertainties plagued a number
of developed markets in 2013. Declining
reimbursement across North America and
Western Europe has resulted in deferred
spending and a shift to lower cost, lower
functionality devices in some instances.
IHS predicts that innovative product
development and streamlining procure-
ment initiatives will dominate the medical
devices landscape in 2014, in an efort to
reduce spiraling healthcare expenditure.
07. Apple and Samsung Lord Over
Field Once Again as Top OEMs in
Semiconductor Spending for 2013
Apple and Samsung remained the
worlds largest buyers of semiconductor
chips in 2013, but the intensifying
battle between the two for the hearts
and minds of consumers in their
product oferings could presage another
mighty showdown this year for the top
ranking, according to a new report from
IHS Technology (NYSE: IHS).
Combined, the two claimed about 14
percent of total spending in 2013, well
ahead of other prominent chip buyers.
Rounding out the Top 5 are Hewlett-
Packard in third place, with $10.1 billion
in spending; Lenovo in fourth, with $9.2
billion; and Dell in ffth, with $7.7 bil-
lion. Te rest of the Top 10 includes Cisco
Systems, Sony, Huawei Technologies,
Panasonic and Toshiba.
08. Mobile messaging security mar-
ket up 70% in 2013 as carriers step
up battle against spam, threats
Market research frm Infonetics Research
released excerpts from its latest SMS/
MMS Security Gateways, market size
and forecasts report, which tracks short
message service (SMS) and multimedia
messaging service (MMS) security hard-
ware and software, such as SMS frewalls
and mobile messaging security platforms.
Te popularity of SMS and MMS has
soared over the last decade, but carriers
around the globe are just now beginning
to seriously evaluate and deploy mobile
messaging security solutions, forced by
economic, regulatory, and attack condi-
tions, notes Jef Wilson, principal analyst
for security at Infonetics Research.
09. One in Three Commercial Fleet
Telematics Units Shipped Based on
Consumer Smartphone Platforms
by 2018, According to ABI Research
With todays mobile and cloud-based
technology, commercial fleets no
longer need to fit expensive hardware
on their new trucks and the avail-
ability of consumer mobile devices
with increasingly sophisticated capa-
bilities means that smaller fleets are
embracing commercial telematics.
6 EMBEDDED SYSTEMS ENGINEERING February 2014
INSIGHT
Are You Taking
Embedded
Security
Seriously?
By Alan Grau, Icon Labs
A lock with the key still in it isnt much
of a solution. Sadly, the security in many
embedded devices isnt much better.
A
t the gym last week I noticed a locker secured
with a padlock but with the key still in the lock.
One of the assumptions of locking something up is
that there is something worth protecting. If the con-
tents of the locker werent worth protecting, then
dont bother with the lock. But if you are going to
bother with a lock, or with adding security to your
embedded device, you might as well make sure the
security will work. A lock with the key still in it
isnt much of a solution. Sadly, the security in many
embedded devices isnt much better.
Many embedded devices have been built with very
little, if any security. Too often what security is
provided is insufficient. In June 2013, ICS-CERT
(Industrial Control Systems Cyber Emergency
Response Team) published a list with more than
300 medical devices from approximately 40 vendors
that used hard-coded passwords, almost the literal
equivalent of leaving the key in the lock.
Other embedded devices are using out-of-date crypto
standards. For example, keyless remote vehicle
entry systems utilize encrypted RFID signals. Most
implementations use a 40-bit encrypt key. When the
standard was frst introduced in the 1990s, 40-bit
encryption keys would take days to crack, but not
today. A google search of keyless vehicle entry sys-
tems hacked turns up a number of articles describing
how thieves are exploiting this weakness to steal cars.
FOR the complete blog visit: http: //eecatalog.com/
grau/2014/02/04/are-you-taking-embedded-securi -
ty-seriously-2/
IHS Embedded
Ranks VME/
VPX Suppliers
With vendor-supplied data, analyst frm
IHS ranks the largest embedded suppliers
in the VME/VPX market.
T
he Embedded Tech Trends insider conference
in Phoenix, IHS senior analyst Toby Colquhoun
revealed the top suppliers in the VME and VPX market
space for the year ended 2012 (the latest data avail-
able). Te conference is sponsored by the standards
organization VITA thats responsible for these open
standards. Its always a challenge to get quantitative
data on this niche market which primarily services the
worlds rugged military and aerospace markets with
harsh environment modules, connectors and systems.
GE Intelligent Platforms is the largest supplier when
VME, VPX and systems are combined, followed by:
Curtiss-Wright Controls Defense Systems, Mercury
Computer, Kontron, and Emerson Network Power
(Figure 1, with apologies for the quality).
Toby also indicated that the VME market is shrinking,
as legacy designs migrate to VPX modules and systems.
In the VPX-only market for modules and systems, the
ranking changes to:
1. Curtiss-Wright at 38 percent
2. GE Intelligent Platforms at 19 percent
3. Mercury Computer at 16 percent.
Tis ranking is consistent with my own expectations
(and CWs recent press releases proclaiming them-
selves as number one). Interestingly, when I asked the
question about small form factor systems like those
from these same suppliers, plus ADLINK, Advantech,
MEN Mikro and others, Toby responded that IHS
doesnt see that these kinds of rugged systems are
encroaching on the VME/VPX market. I disagree, but
cant quantify that just yet.
Well update this data once we receive the actual pre-
sentation later today.
By Chris A. Ciufo, Editor-and-Chief
FOR the complete blog visit: http://eecatalog.com/caci-
ufo/2014/01/20/ihs-embedded-ranks-vmevpx-suppliers/
www.embeddedsystemsengineering.com EMBEDDED SYSTEMS ENGINEERING 7
INSIGHT
Form Factor
Decisions: The
Application
and Deployed
Environment
(Part 2)
By Mark Littleeld
Part 1 of this four-part discussion on
form factors is followed here with the frst
four key vectors necessary to solidify the
choice of a boards form factor.
In part 1 of this series (found http: //eecatalog.
com/littlefield/2013/08/08/part-one-form-factor-
decisions-not-getting-any-easier/) I discussed the
10 dimensions involved in deciding on an embedded
system form factor. In this post I will look at the
first four vectors that drive the system engineering
form factor decision process:
Te computational power needed by the
target application
Te I/O needs of the application
Te size, weight, and power constraints (SWaP)
of the deployed platform
And the characteristics of the deployed environment.
These tend to be relatively fixed requirements that,
when understood, can dramatically reduce the form
factor space. Some of these vectors can be character-
ized and understood by analysis. Others, however,
require different approaches.
FOR the complete blog visit: http: //eecatalog.com/
littlefield/2014/01/06/part-2-form-factor-decisions-
the-application-and-deployed-environment/
MEMS: An
Enabler of the
Next Internet
Revolution
T
he next internet revolution is shaping up and
MEMS is poised to play an important role. Com-
monly referred to as the Internet of Things (IoT) or
Machine to Machine (M2M) communications, this
revolution consists primarily of machines talking
to one another, with computer-connected humans
observing, analyzing and acting upon the resulting
big data explosion it produces. While the first
internet/web revolution changed the world pro-
foundly, the disruptive nature of MEMS, M2M and
the Internet of Things has the potential to change
it even more as the big data machine will no longer
be dependent on human data entry. The internet
traffic will be automatically generated by millions
of things from which we can retool large parts of
the world for better efficiency, security and environ-
mental responsibility.
Te enabling qualities of MEMS sensors quickly come
to mind since they are increasingly becoming cheap,
plentiful and can communicate, either directly with
the internet or with internet-connected devices.
Almost anything to which you can attach a sensor a
football helmet, an automobile, a smartphone, a cow
in a feld, a container on a cargo vessel, the air-con-
ditioning unit in your ofce, a lamppost in the street
can become a node in the Internet of Tings. Be it on
location, altitude, velocity, temperature, illumination,
motion, power, humidity, blood sugar, air quality, soil
moisture you name it, MEMS-based sensors will play
an important role in gathering and/or disseminating
data from millions of devices.
Deeper into the signal chain, however, is another
class of MEMS devices that is evolving and will have
a profound impact. At the heart of all the connected
devices will be a component that provides the timing
that enables all communication to occur.
FOR the complete blog visit: http: //semimd.com/
mems-industry-group-blog/2013/12/09/mems-an-
enabler-of-the-next-internet-revolution/
By Howard Wisniowski, President of HW Marketing Group
8 EMBEDDED SYSTEMS ENGINEERING February 2014
COVER STORY
A
t the core of Alteras recent Stratix
10 announcement ismultiple
cores. Four ARM Cortex-A53s to be
exact, plus a bunch of DSP blocks, more
logic than ever before done by the com-
pany, double the on-chip clock rate and
software designed to create a multicore
system instead of just a dense FPGA. In
efect, its a system-on-chip (SoC) that
bests the companys recent Arria 10 SoC.
But also at the core of the 2014 next-gen
FPGA family is Intels tri-gate (FinFET)
14 nm 3D process technology, to which
Altera has the exclusive FPGA rights
for 12 years. Its Intels tri-gate transis-
tors that give Altera the edgeat least
on paperin the war of high density
FPGAs. Details on Alteras Stratix 10 (the
follow-on FPGA to the Stratix V) are still
SoC FPGA Relies on
Many Cores & 14 nm
Tri-Gate Process
Alteras multicore FPGA uses Intel s tri-gate (FinFET) 14 nm
3D process technology to combine logic, four ARM A53 cores and
OpenCL as a heterogeneous SoC replacement.
By Chris A. Ciufo, Editor-in-Chief
Figure 1: Intels tri-gate transistors propagate Moores
Law, increase silicon density and reduce power.
scarce, though the companys second pre-
announcement added more details and
we can guess at others.
Te new multicore Stratix 10 FPGA SoC
will tape out in 2014 and may possibly
ship by late 2014. Lets take a look at
some of the elements that make up the
Stratix 10s performance goals.
TRI-GATES SECRET SAUCE
Altera is relying heavily on four factors to
achieve the aggressive specs for Stratix 10:
a refned architecture, the ARM Cortex
A53, software tools such as OpenCL and
Intels tri-gate 14 nm process.
Intel has consistently battled Moores
Law through new process innovations.
Following two-dimensional high K
(dielectric) metal process improvements
at 45 nm in 2007, Intel unveiled 3D
transistors in 2011 in 22 nm feature
size. As oxide thickness and transistor
dimensions approach mere Angstroms,
the company essentially made transis-
tors smaller by stacking them in layers
and wrapping the silicon channel with
three gates instead of two. Tis allows
more transistors per square nanometer
by using the Z axis, and theyre smaller
and more power efcient. Te concept
of a non-planar double-gate transistor
with a fn wrapped around the channel
is called a fnFET, although Intel calls
theirs tri-gate (Figure 1).
In early 2013, Intel and Altera inked
a deal that allowed Altera to become
the only FPGA company with access to
Intels 14 nm tri-gate process. Alteras
CEO John Daane said at the time that
he believed Intel was two to four years
ahead of the competition. (Tis is debat-
able as TSMC moves from 20 nm to 16
nm.) Intel is already producing 22 nm
4th generation Intel Core and Intel
Xeon processors (codename Haswell)
processors on tri-gate and a 14 nm ,
5th generation Intel Core processor
(codename Broadwell) is scheduled for
production in 2014.
Despite a recent delay that necessitated
design rule changes to Intels 14 nm
process, Altera as an Intel foundry
customer will certainly follow shortly
after Intels production of the Broadwell
microarchitecture-based processors..
According to Chris Balough, Alteras
senior director of SoC product mar-
keting, design software for the Stratix
V will be available Q1 2014 and frst
silicon will tape out sometime in 2014.
UNIMAGINABLE PERFOR-
MANCE
In June and in November, Altera began
predicting some pretty big numbers for
Stratix 10so much so that the nomen-
clature leaped from Stratix V (available
now) to Stratix 10. Te company is
making what Balough called a hyper-
bolic claim, something we never guessed
was possible, he told me. Tere will be a
2x increase (from 28 nm) in logic fabric
speed to over 1 GHz. Even though den-
sity increases, the SoC device will also
achieve a 70 percent power savings with
a target 4x. Other technology targets are
shown in Table 1.
Tere is credibility in these claims,
albeit based upon scaling factors. Te
new, in-production Arria 10 SoC is based
upon TSMCs 20 nm process and is 15
percent faster than Arria V, consumes
40 percent less power and boasts a 50
percent processor system improvement.
For Stratix 10, the magic again is Intels
14 nm tri-gate process as described
in the whitepaper Te Breakthrough
www.embeddedsystemsengineering.com EMBEDDED SYSTEMS ENGINEERING 9
COVER STORY
Advantage for FPGAs with Tri-Gate
Technology (http://www.altera.com/
literature/wp/wp-01201-fpga-tri-gate-
technology.pdf).
Altera has provided no details yet on
architecture other than the notional
marketing chart shown in Figure 2.
Fundamentally, Stratix 10 processing
will take place in FPGA gates, four ARM
Cortex-A53 processors and a series of DSP
blocks. Software tools meld it all together
into a powerful one-chip system.
DSP BLOCKS AND ARM CORES
Current-generation Stratix V devices
contain two columns of DSP blocks
surrounded by constellations of logic
array blocks. Each DSP block (Figure
3) can be configured for up to eight 9 x
9 bit multipliers, four 18 x 18 bit mul-
tipliers and one 36 x 36 bit multiplier.
These DSP blocks run at 333 MHz and
provide data throughput performance
of 2.67 giga-MACs per block. The
largest Stratix V device (EP1S80) has
22 DSP blocks.
With the forecasted 1 GHz fabric on Stratix
10 over Stratix Vs 333 MHz, one might
expect a 3x performance increase with no
logic changes. However, Alteras Balough
told me theyre expecting a 6x throughput
increase for Stratix 10 to greater than 10
TFLOPs. Its entirely likely the number
of DSP blocks will double, RAM block
sizes will increase and there will be some
fne tuning within the blocks and routing
fabric. However, its also possible the 6x
claim is taking into account other FPGA
resources for data movement and manipu-
lation such as the ARM processors.
An FPGAs DSP sub-systems are a major
reason FPGAs are chosen for high-per-
formance algorithms like video CODECs
or data-plane processing. On the Stratix
10, there are also the four ARM Cortex-
A53 processors. Altera press materials
cite an 8x throughput improvement over
28 nm FPGAs, and Altera says that ARM
claims its the highest power efciency
of any 64-bit processor. Tats probably
not hard to argue considering ARMs
leadership in mobile and low-power
devicesand Intels struggle to catch up.
Te four Cortex-A53 cores
shown in Figure 4 are
members of ARMs Cortex-
A50 series announced in
2012 and are based on
the ARMv8 64-bit archi-
tecture. Te A53 chosen
for Stratix 10 is the little
brother to the A57,
ARMs single-threaded,
deep pipeline monster
targeting servers. Both
devices are designed for
gigahertz performance in
heterogeneous SoCs. For
example, Stratix 10s A53s
will target applications
that ofoad x86 host processors, while
AMDs HieroFalcon server accelerator
64-bit SoC (2H 2014) uses the Cortex-
A57 to complement AMDs on-chip x86.
Stratix 10s A53s are software compat-
ible with previous generation 32-bit
ARM Cortex-A9s in Altera Cyclone,
Arria and Stratix devices. Tis allows
design sockets to upgrade to the latest
FPGAs while migrating forward oper-
ating systems, unmodifed software
and IP cores (Figure 5). Te A53 can
access up to 256 TB of memory with
ECC for on-core L1/L2 caches; both fea-
tures pinpoint data center and high-end
heterogeneous computing applications.
To fully capitalize on Stratix 10s logic,
DSP and A53 resource elements, the
company is planning a suite of hetero-
geneous-focused tools.
SWEET TOOL SUITES
Alteras Chris Balough asserts that all
of Stratix 10s processing elements are
compelling enough by themselves, but
the unimaginable performance comes
into play when they work together as a
system. Altera is counting on OpenCL
and the SoC Embedded Design Suite
(EDS) to capitalize on the FPGAs het-
erogeneous elements.
Te company has endorsed C-based
design entry using OpenCL for several
years via the SDK for OpenCL product.
First demoed by Altera at SuperCom-
puting 2012, the OpenCL design fow
allows designers to work in C and easily
mix logic and on-chip resources into het-
erogeneous multicore architectures. Te
high-level design fow alleviates the typ-
ical RTL coding required for most FPGA
tasks. It also mimics the way embedded
developers mix and match processing
resources at the board or system level.
Figure 2: Alteras Stratix 10 SoC FPGA relies on four ele-
ments to achieve what the company calls unimaginable
performance. Intels 14 nm tri-gate process is the root of
the performance discontinuity from current 28 nm FPGAs.
( Source: Altera.)

Industrys First Gigahertz FPGAs and SoCs
New ultra-high performance FPGA architecture
2x the core performance of prior generation
highend FPGAs
>10 TFLOPs of single-precision foating-point
DSP performance
>4x processor data throughput of prior-genera-
tion SoCs
Break the Bandwidth Barrier with
Unimaginable High-Speed Interface Rates
4x serial transceiver bandwidth from previous
generation FPGAs for high port count design
28 Gbps backplane capability for versatile data
switching applications
56 Gbps chip-to-chip/module capability for
leading edge interface standards
Over 2.5 Tbps bandwidth for serial memory
with support for Hybrid Memory Cube
Over 1.3 Tbps bandwidth for parallel memory
interfaces with support for DDR4 at 3200 Mbps
Table 1: Stratix 10 performance targets. (Source: Altera.)
10 EMBEDDED SYSTEMS ENGINEERING February 2014
COVER STORY
OpenCL code is also portable and lets designers load-level or
performance-tune applications to take advantage of the massively
parallel nature of FPGAs and the Cortex-A53 CPUs. In October of
this year, Altera announced the SDK for OpenCL is conformant
to the OpenCL 1.0 standard and is listed on the Khronos Group
list of conformant products. This means that Altera can provide
a validated cross-platform programming environment designed
to accelerate algorithms at significantly lower power versus other
cross compiler alternatives.
Practically speaking, OpenCL allows Stratix 10 designers to
port or create hardware accelerators to take advantage of the
FPGAs parallelism. This has always been possible when coding in
RTL but not necessarily practical and usually not easily portable.
The OpenCL SDK is complemented by EDS which provides FPGA-
adaptive debug. Alteras Chris Balough describes EDS as a native
multicore debug environment with intrinsic FPGA debug capabili-
ties built in. EDS supports real-time, in-system, whole-chip debug
and visualization, including the ARM Cortex-A53 cores. Thats
because EDS includes Alteras existing DS-5 Altera Edition soft-
ware, ARMs own development tool thats been tailored for Altera
FPGA devices.
Both the OpenCL SDK and EDS software suites exist today for pro-
duction devices, and will soon be released supporting the Stratix 10
so lead customers and early adopters can start their designs.
CONCLUSIONS: ALTERAS
DESIGN TARGETS
Weve written quite a bit about Alteras burgeoning roadmap over
the past twelve months. During an interview in July 2012 with Brad
Howe, Alteras senior VP of R&D, he talked about the need for FPGAs
to evolve past their growing complexity and focus instead on silicon
convergence (http://eecatalog.com/fpga/2012/07/17/fpgas-the-
best-of-both-worlds-until-theyre-not/ ). He was of course referring
not only to heterogeneous FPGA SoCs, but also on reducing design
complexity with OpenCL.
Figure 3: Intels tri-gate transistors propagate Moores Law, increase silicon
density, and reduce power.
QuickAssist Technology Capitalizes on
FPGA Resources
Altera was the frst FPGA company on record to
support Intels QuickAssist technology, a set of
instructions and APIs that seek to ofoad host
CPU instructions to a co-processor like an FPGA.
XtremeData was the board vendor who demoed it
at the 2008 Intel Developers Forum with a Xeon
and Mathworks Simulink graphical block diagram-
ming software.
Alteras Stratix 10, with faster transceivers, DSP
blocks and 1 GHz fabric, is likely to be a favorite
co-processor for Intel host CPUs like the latest
4th Generation Core devices (code named Has-
well) or Intels next-generation 14 nm tri-gate
Broadwell CPUs. According to Intel, QuickAssist
(http://www.intel.com/content/www/us/en/io/
quickassist-technology/quickassist-technology-
developer.html) is ideal for computational
workloads including cryptography, data compres-
sion and pattern matchingall applications that
are algorithmically heavy and can take advantage
of an FPGAs parallelism via mixed resources.
In the case of Alteras Stratix 10 next-gen devices,
CPU ofoad via QuickAssist could also utilize
high-level language OpenCL to construct heteroge-
neous hardware macros which balance workloads
between the FPGA fabric, DSP blocks and the
decision-making capability of the ARM Cortex-
A53. All of these resources, of course, work as an
accelerator sub-system to Intels Xeon, Core and
now the newest Rangeley Atom CPUsall of which
contain Intel QuickAssist Technology. X
Figure 4: Stratix 10 contains four Cortex-A53 cores,
ARMs most impressive multi-threaded 64-bit core.
www.embeddedsystemsengineering.com EMBEDDED SYSTEMS ENGINEERING 11
COVER STORY
Stratix 10, with its unimaginable performance made possible by Intels 14 nm
tri-gate process, epitomizes the future of big density FPGAs. It was an explicit
choice to make [Stratix 10] a heterogeneous computing platform, said Alteras
Chris Balough.
Were anxious to see the company release details on the architecture, cite power
estimates based upon notional reference designs and detail more of the specs.
As we went to press, Altera revealed some data on Stratix 10s transceivers (4x
bandwidth and 28 Gbps backplane switching), and indicated that the device is
3D-capable for packaging with ASSPs and memories.
Also, it will be interesting to see if Altera targets Big Data applications
with Stratix 10 as I had predicted in June 2013 (Does Altera have Big Data
Communications on the Brain? http://eecatalog.com/caciufo/2013/06/05/a-
slew-of-recent-altera-high-performance-announcements-over-the-last-three-
months-can-only-mean-one-thing-the-company-is-targeting-big-data-in-a-big-
way/#comment-20464 ). The companys string of acquisitions and posturing sure
points that way.
OpenCL allows Stratix 10 designers to port
or create hardware accelerators to take
advantage of the FPGAs parallelism
Figure 5: Stratix 10s quad Cortex-A53 cores can run in 32-bit mode for upgradeability from previous generation devices.
Chris A. Ciufo is editor-in-chief for embed-
ded content at Extension Media, which
includes the EECatalog print and digital
publications and website, Embedded Intel
Solutions, and other related blogs and embed-
ded channels. He has 29 years of embedded
technology experience, and has degrees in
electrical engineering, and in materials sci-
ence, emphasizing solid state physics. He can
be reached at cciufo@extensionmedia.com.
12 EMBEDDED SYSTEMS ENGINEERING February 2014
ESE FEATURE
A
s Microchip Technologys Henry Muyshondt states, Ethernet means diferent things to diferent people. And that
makes a discussion of the adoption of Ethernet in automotive applications tricky. Along with Muyshondt, senior mar-
keting manager for the Automotive Information Systems Division of Microchip Technology, Inc., we have Armin Lichtblau,
business development director for the Automotive Network Design at Mentor Graphics (Deutschland); Joel Hofman, auto-
motive strategist for Intels expanding Automotive Solutions Division; and Nick DiFiore, director of the Automotive Segment
for Xilinx. Many thanks to our panel for their thought-provoking responses!
Automotive Ethernet: No Simple Answers
Industry leaders speak out on the status of automotive Ethernet and where the
technology needs to go.
By Cheryl Coup, Managing Editor
EECatalog: Whats your view of the
status of Ethernet adoption in automo-
tive applications?
Henry Muyshondt, Microchip: For
streaming data within the vehicle, the
automotive industry has already pretty
much settled on the MOST standard
(Media Oriented Systems Transport).
Over the last 13 years, it has come to
be used in more than 150 automobile
models already on the road, from most
of the major car makers, in all regions
of the world. There are more than 100
million MOST devices in use, as mul-
tiple devices are used in each vehicle.
This technology can handle both
Ethernet frames, as well as streaming
information, all running in parallel.
The higher-layer protocols used in the
IT industry can communicate over the
MOST standard without needing any
changes, other than at the low-level
link layer. Ethernet frames are sent
unmodified, and other channels are
available to transport audio and video
data without overhead.
In terms of the actual Ethernet physical
layer, it is not well suited for automotive
applications due to electromagnetic
compatibility issues as well as the
challenges associated with running
standard Ethernet cabling within the
vehicle. Tere are proprietary technolo-
gies, such as Broadcoms BroadR-Reach
that could be applied, but those are not
really standard Ethernet and at this
point have not received the wide adop-
tion among carmakers that some in the
industry press would suggest. Tere are
many challenges that would need to be
solved, in order to implement a low-
cost, standards-based Ethernet solution
in automobiles, and it will be several
years before the current IEEE eforts
toward defning a Gigabit physical layer
for automobiles become a reality.
In short, Ethernet-style frames are
defnitely seeing increased use in
automotive applications. Te Ethernet
physical layer, not so much.
Armin Lichtblau, Mentor Graphics:
Particularly for new generation E/E
designs and often AUTOSAR systems,
Ethernet in the car is a requirement. Te
Ethernet communication is required as
diagnostics over Ethernet to achieve
high-speed, end-of-line programming
in one use case. Te other use case is
the adoption of high-speed applications
in the car environment, e. g., for video
signal processing on safety and active
safety systems (collision camera, etc.).
Joel Hoffman, Intel: Ethernet adop-
tion is occurring slowly in automotive.
Henry Muyshondt,
Microchip
Armin Lichtblau,
Mentor Graphics
Joel Hoffman,
Intel
Nick DiFiore,
Xilinx
www.embeddedsystemsengineering.com EMBEDDED SYSTEMS ENGINEERING 13
ESE FEATURE
Tis is partially due to the entrenched
nature of existing closed solutions (such
as MOST, CAN, Flex Ray and others)
that have been developed specifcally
and exclusively for automotive, along
with difering ideas on how to deploy
the technology (such as the proprietary
OPEN protocol by Broadcom).
Tese issues existed in the tech and
enterprise segments as well, when
Token-Ring, Asynchronous Transfer
Mode (ATM) and other complex designs
claimed technical advantages until more
advanced silicon and software were cre-
ated for the broader Ethernet market. If
these issues had lingered, we would not
have the cost-efective enterprise cloud
and connectivity that we have today.
Nick DiFiore, Xilinx: Ethernet for auto-
motive applications is rapidly growing
among automotive OEMs to meet the
growing bandwidth demands for new
in-car audio and video (A/V) features.
Many automobile vendors are plan ning
to roll out Ethernet-based infotainment
and advanced driver assist systems
(ADAS) products in their 2015-2017
models. As a result, several high-profle
automotive OEMs including GM, BMW
and Hyundai have joined the AVnu
Alliancean industry forum dedicated
to the advancement of professional-
quality audio video in markets that
include automotive, professional AV
and consumer electronics. Xilinx is one
of the founders of the AVnu Alliance.
EECatalog: Where does the technology
need to go to cement Ethernets role in
the car?
Muyshondt, Microchip: If by Ethernet
you mean packet-based communica-
tion technology, that role is pretty well
cemented in the car for future applica-
tions, as mentioned above. Te cement is
still hardening, but there is no doubt that
for inter-domain communication, both
inside and outside the vehicle, packet-
based communication is very relevant.
Much remains to be seen about what is
implemented at the physical level, to
transport these packets of informa-
tion. So far, there are more than 150
vehicle models that have standard-
ized on MOST technology for their
high-speed network. MOST, in turn,
has been enhanced to include packet
communications and a dedicated
Ethernet packet channel that can
move unmodified Ethernet frames.
We expect Ethernet to be used for
some types of communication within
the vehicle, using the existing MOST
infrastructure. Additionally, a next-
generation, multi-gigabit version of
the MOST standard is already being
developed for future applications.
Even if packet communication is used
for all in-vehicle applications, the
MOST technologys full bandwidth
can be allocated to Ethernet-style
communication, providing an
automotive-proven physical layer
that also has the f lexibility to allow
streaming communication in parallel
with the packet-based channels.
The MOST standard has already
cemented itself with companies such
as General Motors, Volkswagen and
Toyota, along with most of the other
major car makers of the world. These
are large-volume manufacturers that
have already proven the MOST tech-
nologys cost-effectiveness for even
midrange to low-end vehicles. Addi-
tionally, the MOST Ethernet Packet
channel is helping car makers imple-
ment Ethernet-style communications
in vehicles.
Ethernet-style communications are
already in place, while the Ethernet
physical layer really isnt being used
in vehicles.
Lichtblau, Mentor Graphics: Ethernet
stacks need to be implemented in the
Embedded Basic software stack which is
used as the central operating platform
in the car ECUs. Te tooling provided
for the ECU development needs to be
set up to confgure and test the Ethernet
components. Te IP communication
protocol needs to be adjusted with
higher level protocols to accommodate
the automotive requirements.
Hoffman, Intel: OEMs need to take
a leadership position in solving
any remaining technical issues and
pulling their supply chain into the
ecosystem. This begins with audio
systems implementing audio-video
bridging (AVB), and extends to other
deterministic control systems in the
vehicle. While there are risks with
implementing any new technology,
automakers have great influence
in stimulating the development of
related software that will be needed.
For the first cycle or two there may
not be significant savings; however,
the first adopter will gain the most in
the end through reduced development
costs, reduced equipment costs and
long-term vehicle fuel savings due to
vehicle weight reduction.
DiFiore, Xilinx: Tere are two main issues:
1. 1Gbps physical transport in automo-
tive environments. Teres a need
for a low-cost, single, unshielded
twisted-pair (UTP) solution that
meets automotive EMC requirements.
Tis need is currently met by Broad-
coms Broad-R-Reach technology
for 100Mbps Ethernet networks.
Te industry still needs an aford-
able 1Gbps UTP solution to really
cement use of Ethernet in automo-
tive applications, especially for A/V
uses. Broadcom and other Ethernet
vendors are working on technology to
meet the 1Gbps requirement.
2. Guaranteed quality of service (QOS)
over Ethernet for reliable, determin-
istic, real-time data delivery and audio/
video streaming over Ethernet in a car.
Tis need is not fully satisfed by cur-
In short, Ethernet-style
frames are denitely seeing
increased use in automotive
applications. The Ethernet
physical layer, not so much.
14 EMBEDDED SYSTEMS ENGINEERING February 2014
ESE FEATURE
rent IEEE Ethernet standards. However
standards dealing with bandwidth
reservation, time synchronization and
packet prioritization are emerging and
the AVnu Alliance is developing ways of
adapting these standards for automo-
tive needs. Many automotive OEMs are
currently evaluating Ethernet exten-
sions against their list of requirements.
At this point, its not clear if OEMs will
agree upon a complete, standardized
Ethernet stack or if diferent OEMs will
simply adopt variants of Ethernet AVB.
EECatalog: What are the challenges you
expect to address?
Muyshondt, Microchip: Te biggest
challenge is to have the right system,
at the right point in time, at the right
cost point. Te networking infrastruc-
ture inside vehicles has much diferent
requirements than the typical IT
infrastructure, in terms of robustness
and surviving in a harsh environment.
Microchip is a leader in both consumer
and automotive applications, and I can
tell you that it is not easy to simply
take a consumer device and harden it
for automotive applications. Te device
has to start out with the design goal of
being used in automotive applications.
Bandwidth costs money. You can either
spend that money on the physical
connection, or you spend it on bigger
processors with more computing capa-
bilities. Te challenge is to balance
all sides of the equation to obtain the
optimum system. Tis requires par-
ticipation by the people designing the
system. Carmakers have to be involved
from the ground up in specifying the
various parameters, including how the
system will be supported after it rolls
of the assembly line, and for many years
after it rolls away from the dealership.
Only carmakers and their suppliers can
properly assess the correct trade-ofs
among the various competing objectives
of a networking and communication
system. Teir timeframes for choosing
a technology have to look fve years or
even a decade into the future, in order
to select the appropriate technology to
use. Carmakers have to be technology
decision-makers, and not just the users
of what other industries may provide.
Infrastructure, such as a networking
system, doesnt provide a lot of dif-
ferentiation between cars. As such,
it is in everyones best interest to use
common plumbing to move the data
behind the dashboard. Carmakers need
to cooperate with each other on a tech-
nology they can truly infuence, rather
than relying on devices primarily built
for other industries that have much
higher volumes, and therefore much
higher infuence, than the automotive
industry. Teir products have very long
life cycles, measured in dozens of years
rather than a few months, and therefore
their choices need to have built-in reli-
ability and robustness. Tey also have
to have the confdence that the actual
devices they select to implement a tech-
nology will still be manufactured more
than a decade later, when the consumer
and IT devices of today are but a long-
forgotten memory.
Ethernet-style communications can
help address some of these challenges,
alongside streaming technologies such
as the MOST standard. Te Ethernet
physical layer, on the other hand, just
isnt well suited for automobiles.
Lichtblau, Mentor Graphics: Mentor is
committed to provide an Ethernet stack
as part of their AUTOSAR solution and
will fully support Ethernet in cars and
diagnostics over Ethernet with their
Embedded SW AUTOSAR stack as well
as the AUTOSAR tooling.
Homan, Intel: Intel believes in stan-
dards and has benefted most when
standards are widely adopted. Our
participation in automotive forums
including AVnu Alliance (avnu.org),
GENIVI Alliance (genivi.org), Wi-Fi
Alliance (wi-f.org) and others bring
the best of the ecosystem together to
agree on common methods for solving
common problems. Collaboration with
these groups allows Intel to produce
silicon solutwions such as the Intel
Ethernet Controller I21X family with
support for AVB. Intel also develops
proof point technologies to jump start
the industry including reference imple-
mentations such as Open AVB (https://
github.com/intel-ethernet/Open-AVB).
DiFiore, Xilinx: Xilinx solutions already
address Ethernet QOS challenges and
the company has worked with Digital
Design Corporation (DDC, a Xilinx
Alliance Program member) to develop a
complete Ethernet AVB solution called
EAVB for automotive applications for
use with Xilinx FPGAs and the Xilinx
Zynq All Programmable SoC. Ethernet
AVB implementations on Xilinx All
Programmable platforms allow our
customers to develop and field system
designs well ahead of their competitors
and to react quickly as the automotive
uses of Ethernet and the related stan-
dards evolve and grow.
Cheryl Berglund Coup is managing editor of
EECatalog.com. Her articles have appeared in EE
Times, Electronic Business, Microsoft Embedded
Review and Windows Developers Journal and
she has developed presentations for the Embed-
ded Systems Conference and ICSPAT. She has
held a variety of production, technical marketing
and writing positions within technology compa-
nies and agencies in the Northwest.
www.eecatalog.com/transportation EMBEDDED SYSTEMS ENGINEERING 15
engineers guide to TRANSPORTATION
A
variety of conditions have afected
the evolution of embedded
computing technology in rail applica-
tionsincluding market demand,
standards organizations, equipment
vendors and economics. Historically,
European vendors of rail equipment
might have pushed the envelope of
embedded technology a little harder and
further because of the greater emphasis
on passenger service there. But antici-
pated growth for U.S. passenger rail
service ofers new opportunities for
embedded system designers to imple-
Growth in U.S. Rail
Offers New Opportunities
for Embedded System
Designers
Embedded system designers with expertise in defense, aerospace,
industrial or automotive applications can transfer the harsh-
environment, high-vibration aspects of those safety-critical
market experiences into the railway sector.
By Barbara Schmitz, MEN Mikro Elektronik
Figure 1: Multiple targeted high-speed rail programs offer new opportunities for embedded
systems designers to get involved with railway embedded design applications.
ment safety and control applications for
high-speed or light-rail systems..
ADAPTING TO A
CHANGING WORLD
Despite Americas afnity for the auto-
mobile, the combination of metropolitan
highway congestion and increased door-
to-door times associated with air travel
(upwards of three hours for a one-hour
fight), make high-speed rail travel a
viable, cost-efective alternative for trips
of two to four hours duration.
Te American Recovery and Reinvest-
ment Act of 2009 (ARRA), which allocated
$8 billion for high-speed rail projects,
has helped to promote initiatives for
new routes in the U.S. One area of focus
includes the Northeast Corridor between
Boston, New York, Philadelphia, Balti-
more and Washington, where distances
are relatively short and demand is high.
And in California, that states high-speed
rail authority is developing an 800-mile,
high-speed train system connecting the
states major urban centers, including
the Bay Area, Sacramento, Fresno, Los
Angeles and San Diego. Other targeted
opportunities include Texas, the Midwest
and Northwest.
MULTIPLE AVENUES FOR
TECHNICAL ADVANCES
Te potential for embedded system appli-
cations covers a broad spectrumfrom
the rolling stock itself to the associated
modern power supply and signal tech-
nology infrastructure.
At the most fundamental leveltrack
constructionthere is a need for pre-
cision equipment to ensure accurate
installation of rails within very specifc
tolerances, to prevent problems from
being exaggerated by higher train speeds.
Evan after initial installation, monitoring
systems need to ensure that the efects of
wear and stress dont compromise wheel
fange and rail-gage face geometry that
could lead to fange-climb derailments.
(Half of all derailments are attributed to
faulty tracks or equipment.)
From an operational perspective, there
are multiple needs for wireless commu-
nications systems designed to prevent
switching mistakes, control excessive
speed and automatically enforce fail-safe
control in the event of human error. Te
Federal Railroad Administration (FRA) is
encouraging the industry to implement
Intelligent Railroad Systemsincluding
new sensor, computer and digital com-
munications technologiesas integrated
solutions that will compound the benefts
for train control, braking systems, grade
crossing safety and defect detection.
Such advanced train control systems are
geared to allow a higher concentration of
16 EMBEDDED SYSTEMS ENGINEERING February 2014
engineers guide to TRANSPORTATION
rail equipment to operate safely within a
given track infrastructure.
Finally, at the passenger service level,
wireless communications applications
can upgrade infotainment systems for
real-time rail scheduling, news feeds
and entertainment programming
during transit.
DELIVERING PRECISION IN A
ROUGH ENVIRONMENT
Although manufacturers situated in or
serving overseas markets have developed
many of the worlds leading passenger
rail applications, domestic designers and
suppliers can use new U.S. rail installa-
tions to expand their application base.
Embedded system designers with exper-
tise in defense, aerospace, industrial or
automotive applications can transfer
the harsh-environment, high-vibration
aspects of those safety-critical market
experiences into the railway sector. Con-
versely, U.S.-based designers needing to
assemble components for safety-critical
rail system designs can beneft from
purpose-specifc SBCs, modules and
subsystems already rigorously proven in
demanding European rail applications.
Here are a few representative examples
of embedded computing opportunities in
railway environments from the ground up.
MAINTENANCE CONTROL
Computer-aided tamping systems help
to calculate and visualize track geometry
as well as control the subsequent track-
laying process itself. Allowable deviations
of the track geometry are limited to a few
millimeters in all three dimensions. Te
same systems can monitor track geom-
etry during initial installation as well as
subsequent periodic maintenance drives.
Automatic ballasting and tamping opera-
tions call for extremely rugged electronic
equipment to maintain precision despite
the heavy shock and vibration experi-
enced during track maintenance.
TILT CONTROL
Tilt-control technology uses sensor-
controlled actuators to adjust the railcar
body in relation to the bogie or wheel
truck on which it rides, depending on
the centrifugal forces encountered.
Tis allows safer operation and greater
passenger comfort in turns, with fewer
compromises in high-speed performance.
Efcient bogie control also leads to lower
energy consumption.
AUTOMATED TRAIN
PROTECTION
Positive train control (PTC) is a commu-
nication-based system that uses GPS
capabilities for position assessment
and radio frequency data links for com-
munication with dispatch ofces, grade
crossings and railway workers along the
right-of-way. It is designed to prevent
train-to-train collisions, enforce speed
restrictions and temporary slow orders,
and provide protection for workers and
their equipment operating under spe-
cifc authorities.
Designers new to automated train
protection can learn from European
implementations of a radio system
called Global System for Mobile Com-
municationsRailway (GSM-R). GSM-R
technology uses frequencies reserved
specifcally for rail applications to
provide voice and data communica-
tion between tracks and trains. A
train-based computer controls speed
according to various characteristics
of the rail equipment and operational
conditions of the track.
PASSENGER
INFORMATION SYSTEMS
Infotainment solutions keep passen-
gers updated regarding route stops,
Figure 2:The potential uses for embedded systems in
rail applications cover a broad spectrum of functions
from precise initial rail installation geometry, to train
protection and signaling systems, to station manage-
ment and passenger convenience.
Figure 3: COTS single board computers ( SBCs), like this
MEN Micro 6U VMEbus card featuring three PowerPC
processors, ensure safety integrity level 4 ( SIL4)
operation with complete redundancy at board level for
safety-critical rail applications.
13 Whatney
Irvine, CA 92618
Toll Free: 800-866-6008
Fax: 949-420-2501
Email: ACGinfo@advantech.com
Mobile Resource Management
Quality In-Vehicle Computer and Tablet Solutions
ITS/Telematics
2013
About Advantech-DLoG
Advantech is a leading global manufacturer of industrial PCs and has established a great deal of experience and expertise in specialized industrial vehicle
computing, such as that used in trucks and trailers.
DLoG GmbH is a global player in the feld of industrial applications for in-vehicle computing solutions in extremely demanding environments. DLoG is renowned
for its excellent German craftsmanship and design capabilities. The company, ranked third in the European market, is a leading provider of rugged industrial
computers used in construction machinery, forklifts, mining engineering, and industrial manufacturing.
DLoG was acquired by Advantech in March 2010. Following the acquisition, Advantech began expanding its global industrial in-vehicle computing market under
the new brand name Advantech-DLoG. Combining the experiences and leading market positions acquired by both companies, Advantech-DLoG aims to become
the leading supplier of industrial vehicle computing products and services for select vertical markets worldwide, such as warehousing, heavy duty applications and
feet management.
Wide DC Input Range
Normally, for a 12V/24V vehicle power system, the DC voltage may go down to 6V/8V during peak loading (see Figure 1), and it may be subject to engine
charging up to a maximum of 32~34 V. If there were no power protection, this dirty power input might cause a feet management system malfunction; in fact
this very thing happens easily in old trucks. Therefore, providing for a wide DC input voltage range avoids damage to the system.
Power Management
Efcient powernet energy management requires embedded software control. Software design must be integrated with hardware design from the beginning of
power development to avoid complications during system implementation.
SAE J1113/ ISO 7637-2/ E-mark Certifcations
The automotive environment is fraught with electrical hazards. These hazards, including electromagnetic interference, electrostatic discharges and other
electrical disturbances, are generated by various vehicular sub-systems such as ignition, relay contacts, alternator, injectors, and accessories. These generated
hazards can occur directly in the wiring harness in case of conducted hazards, or may afect electronic modules indirectly via induction. These hazards can
impact the electronics in two wayseither on the data lines or on the power rail wires, depending on the environment. Therefore, in order to assure good
power design, Advantech-DLoG products are always certifedour guarantee of design quality.
Advantech-DLoG products support operation under a wide range of working temperatures. TREK series devices were tested in accordance with SAEJ1455 4.1.3.1
standards over a 24 hr period; the results are shown below for reference:
Advantech uses industrial-grade components to ensure reliability and durability. During the early design stages, a rigid thermal simulation is performed and
reviewed against actual test results. And depending on result outcomes, key components for durability are then put under strict wide range temperature testing
as defned for industrial equipment (-40 to 85 C, see Figure 2b). The net result is that systems are able to operate without failure at ranges of -30 to 70 C
(see Figure 2a).
Mobile Resource Management (MRM) is the process of optimizing, dispatching and tracking the use of assets and people that are involved in the movement of
goods. The focus domains covers asset management, feet management, and mobile workforce.
Asset Management
Fast, correct, real-time data capture and access are key issues in the asset management. Advantech-DLoG brings advanced computing to extreme environments,
coping with dust, shock, vibration, humidity, impact, physical abuse, and extreme temperatures. From mechanical engineering to radio antenna design, from
rugged to extreme, Advantech-DLoG ensures the security of your assets and helps you to manage them.
Fleet Tracking
Advantech-DLoG in-vehicle computing and feet management solutions translate real-time data about vehicles, cargo, deliveries and workers into dynamic,
understandable displays that help increase productivity and lower operating costs.
Mobile Workforce
Advantech-DLoG provides industrial-grade mobile computing devices with strong and reliable hardware design to survive in harsh environments; fexible
selectable function modules to ft diferent systems; and light-weight design and accessories to reduce burden over the entire work day.
Wide-range Working Temperatures
-30 C ~70 C
Peripheral Integration
TPMS, Vehicle-grade cameras
Vibration/Shock Solutions
Car Power Design
12V/24V/48V car power solution
SAE J1113 standards
RISC/x86
Multiple Grade Architectures
Industrial-grade x86 & RISC platforms
RF Technology
GPS, WLAN, Bluetooth, GPRS/CDMA/HSDPA
In-vehicle Communications
Supports CAN, OBDII, J1939 & J1708
SDK Software Support
Easy to develop OTA, RF settings
12 or 24V
+112V
24V
-600V
V
V
0
0
0.5s
1ms
0.05ms
Figure 1 in ISO 7637-2 for 24-V vehicle power system
12 or 24V
+112V
V
0
0.05ms
Figure 2 in ISO 7637-2 for 24-V vehicle power system
hrs hrs
SAE J1455 Figure 2a - 24 Hour Thermal Cycle SAE J1455 Figure 2b - Short (8 Hour) Thermal Cycle
Test Vibration Curve
EN 60721-3-5 Class 5M3 Random Vibration Test (3.38Grms)
10~500Hz, 3.38Grms, 1hr/per axis
Test PSD: 10~200Hz: 3 m/S, 200~500Hz, 1 m/S
500.00 10.00
0.0013
0.0100
0.1000
0.1950
Test Shock Curve
EN 60721-3-5 Class 5M3 Shock Test Level II (100G /6ms)
300
250
200
150
100
50
0
T 0 ime(msec)
Acceleration
(Gs)
Acceleration VS Time
Ch1 TABLE 100.91
GS Channel Description: msec In/S Filter Hz Max Gs Min Gs
6.00 146.23 1000.00 100.91 -2.64
50
-50
-100
Certified Car Power Solution
Advantech-DLoG develops power management software to optimize your usage, and we insist that all systems pass vehicle related tests, such as SAE J1113/ ISO
7637-2/ E-mark to ensure customer equipment can operate well in severe environments.
Mobile Resource Management
In-vehicle Wide Working Temperature Range
Advantech-DLoG responds to the problems associated with electronic systems operating in harsh vehicle environments by thorough research and design.
Quality Assurance personnel physically test products in the environment in which they will be used. The development and testing that is conducted follow SAE
J1455 4.9.4.2, and MIL-STD-810G 514.5 , and EN60721-3-5 class 5M3 standards.
The EN60721-3-5 class 5M3 standard certifcation means the product can withstand three times the shock and vibration of most military MIL-810G grade
computing devices. Note: EN60721-3-5 : Classifcation of environmental conditions - Part 3: Classifcation of groups of environmental parameters and
their severities - Section 5: Ground vehicle installations.
Vibration and Shock Resistance
1 3 Wh a t n e y I r v i n e , C A 9 2 6 1 8 To l l F r e e : 1 - 8 0 0 - 8 6 6 - 6 0 0 8 We b s i t e : w w w. a d v a n t e c h . c o m E ma i l : A C G I n f o @a d v a n t e c h . c o m
About Advantech-DLoG
Advantech is a leading global manufacturer of industrial PCs and has established a great deal of experience and expertise in specialized industrial vehicle
computing, such as that used in trucks and trailers.
DLoG GmbH is a global player in the feld of industrial applications for in-vehicle computing solutions in extremely demanding environments. DLoG is renowned
for its excellent German craftsmanship and design capabilities. The company, ranked third in the European market, is a leading provider of rugged industrial
computers used in construction machinery, forklifts, mining engineering, and industrial manufacturing.
DLoG was acquired by Advantech in March 2010. Following the acquisition, Advantech began expanding its global industrial in-vehicle computing market under
the new brand name Advantech-DLoG. Combining the experiences and leading market positions acquired by both companies, Advantech-DLoG aims to become
the leading supplier of industrial vehicle computing products and services for select vertical markets worldwide, such as warehousing, heavy duty applications and
feet management.
Wide DC Input Range
Normally, for a 12V/24V vehicle power system, the DC voltage may go down to 6V/8V during peak loading (see Figure 1), and it may be subject to engine
charging up to a maximum of 32~34 V. If there were no power protection, this dirty power input might cause a feet management system malfunction; in fact
this very thing happens easily in old trucks. Therefore, providing for a wide DC input voltage range avoids damage to the system.
Power Management
Efcient powernet energy management requires embedded software control. Software design must be integrated with hardware design from the beginning of
power development to avoid complications during system implementation.
SAE J1113/ ISO 7637-2/ E-mark Certifcations
The automotive environment is fraught with electrical hazards. These hazards, including electromagnetic interference, electrostatic discharges and other
electrical disturbances, are generated by various vehicular sub-systems such as ignition, relay contacts, alternator, injectors, and accessories. These generated
hazards can occur directly in the wiring harness in case of conducted hazards, or may afect electronic modules indirectly via induction. These hazards can
impact the electronics in two wayseither on the data lines or on the power rail wires, depending on the environment. Therefore, in order to assure good
power design, Advantech-DLoG products are always certifedour guarantee of design quality.
Advantech-DLoG products support operation under a wide range of working temperatures. TREK series devices were tested in accordance with SAEJ1455 4.1.3.1
standards over a 24 hr period; the results are shown below for reference:
Advantech uses industrial-grade components to ensure reliability and durability. During the early design stages, a rigid thermal simulation is performed and
reviewed against actual test results. And depending on result outcomes, key components for durability are then put under strict wide range temperature testing
as defned for industrial equipment (-40 to 85 C, see Figure 2b). The net result is that systems are able to operate without failure at ranges of -30 to 70 C
(see Figure 2a).
Mobile Resource Management (MRM) is the process of optimizing, dispatching and tracking the use of assets and people that are involved in the movement of
goods. The focus domains covers asset management, feet management, and mobile workforce.
Asset Management
Fast, correct, real-time data capture and access are key issues in the asset management. Advantech-DLoG brings advanced computing to extreme environments,
coping with dust, shock, vibration, humidity, impact, physical abuse, and extreme temperatures. From mechanical engineering to radio antenna design, from
rugged to extreme, Advantech-DLoG ensures the security of your assets and helps you to manage them.
Fleet Tracking
Advantech-DLoG in-vehicle computing and feet management solutions translate real-time data about vehicles, cargo, deliveries and workers into dynamic,
understandable displays that help increase productivity and lower operating costs.
Mobile Workforce
Advantech-DLoG provides industrial-grade mobile computing devices with strong and reliable hardware design to survive in harsh environments; fexible
selectable function modules to ft diferent systems; and light-weight design and accessories to reduce burden over the entire work day.
Wide-range Working Temperatures
-30 C ~70 C
Peripheral Integration
TPMS, Vehicle-grade cameras
Vibration/Shock Solutions
Car Power Design
12V/24V/48V car power solution
SAE J1113 standards
RISC/x86
Multiple Grade Architectures
Industrial-grade x86 & RISC platforms
RF Technology
GPS, WLAN, Bluetooth, GPRS/CDMA/HSDPA
In-vehicle Communications
Supports CAN, OBDII, J1939 & J1708
SDK Software Support
Easy to develop OTA, RF settings
12 or 24V
+112V
24V
-600V
V
V
0
0
0.5s
1ms
0.05ms
Figure 1 in ISO 7637-2 for 24-V vehicle power system
12 or 24V
+112V
V
0
0.05ms
Figure 2 in ISO 7637-2 for 24-V vehicle power system
hrs hrs
SAE J1455 Figure 2a - 24 Hour Thermal Cycle SAE J1455 Figure 2b - Short (8 Hour) Thermal Cycle
Test Vibration Curve
EN 60721-3-5 Class 5M3 Random Vibration Test (3.38Grms)
10~500Hz, 3.38Grms, 1hr/per axis
Test PSD: 10~200Hz: 3 m/S, 200~500Hz, 1 m/S
500.00 10.00
0.0013
0.0100
0.1000
0.1950
Test Shock Curve
EN 60721-3-5 Class 5M3 Shock Test Level II (100G /6ms)
300
250
200
150
100
50
0
T 0 ime(msec)
Acceleration
(Gs)
Acceleration VS Time
Ch1 TABLE 100.91
GS Channel Description: msec In/S Filter Hz Max Gs Min Gs
6.00 146.23 1000.00 100.91 -2.64
50
-50
-100
Certified Car Power Solution
Advantech-DLoG develops power management software to optimize your usage, and we insist that all systems pass vehicle related tests, such as SAE J1113/ ISO
7637-2/ E-mark to ensure customer equipment can operate well in severe environments.
Mobile Resource Management
In-vehicle Wide Working Temperature Range
Advantech-DLoG responds to the problems associated with electronic systems operating in harsh vehicle environments by thorough research and design.
Quality Assurance personnel physically test products in the environment in which they will be used. The development and testing that is conducted follow SAE
J1455 4.9.4.2, and MIL-STD-810G 514.5 , and EN60721-3-5 class 5M3 standards.
The EN60721-3-5 class 5M3 standard certifcation means the product can withstand three times the shock and vibration of most military MIL-810G grade
computing devices. Note: EN60721-3-5 : Classifcation of environmental conditions - Part 3: Classifcation of groups of environmental parameters and
their severities - Section 5: Ground vehicle installations.
Vibration and Shock Resistance
1 3 Wh a t n e y I r v i n e , C A 9 2 6 1 8 To l l F r e e : 1 - 8 0 0 - 8 6 6 - 6 0 0 8 We b s i t e : w w w. a d v a n t e c h . c o m E ma i l : A C G I n f o @a d v a n t e c h . c o m
Poduct Information
Poduct Information
Model Name TREK-722 TREK-723 TREK-753 TREK-303RH TREK-303DH
Processor TI ARM Cortex-A8 AM3703 800 MHz
Industrial-grade Intel Atom XL
Z510PT 1.1 GHz
(Z520PT 1.3 GHz as option)
-
Design Compatible Models - -
Paired with
TREK-550/ TREK-668
Paired with
TREK-550/ TREK-668
OS WinCE6.0 & optional Android 2.3.4
WES 2009, WinCE6.0 and
Ubuntu Linux 10.04
-
Memory
Size On board 256MB Mobile LPDDR
One 200-pin SODIMM socket,
Supports up to 2 GB DDR2 400/533
memory module
-
Module Type On board LPDDR 1 x 200-pin SODIMM -
Storage
On board NAND type 2GB for boot loader,
operating system & customer apps
1 x push-push type SD slot
1 x external accessible SD slot,
1 x external accessible CF slot
-
Display
Size/Type 5" (16:9) TFT LCD 7" (16:9) TFT LCD 7" (16:9) TFT LCD 7" (16:9) TFT LCD
Max.
Resolution
800 x 480 800 x 480 800 x 480 800 x 480 800 x 480
Max. Colors 262K 262K 262K 262K
Brightness
(cd/m
2
)
350 with TS
(typical)
400 with TS
(typical)
400 with TS (typical) 400 with TS (typical) 400 with TS (typical)
Viewing
Angle (degrees)
70 / 70 / 70 / 50 70 / 70 / 60 / 60 70 / 70 / 60 / 60 70 / 70 / 60 / 60
Backlight MTBF 20,000 hrs 50,000 hrs 50,000 hrs 50,000 hrs
Touchscreen Technology 4-wire resistive type
4-wire resistive type; optional
support for sunlight readable feature
by Low-Reection touch solution
4-wire resistive type
Brightness Control
Built-in light sensor for
auto backlight adjustment
2 x hotkeys in front panel; built-in
light sensor for auto backlight
adjustment
2 x hotkeys in front panel; built-
in light sensor for auto backlight
adjustment
Built-in light sensor
for auto backlight
adjustment
I/ O Ports
2 x USB host, 2 x RS-232, 1 x CAN with
J1939 protocol, 2 x DI/DO
3 x USB host, 2 x RS-232 with DC
Output, 1 x RS-485,
1 x CAN w/ J1939, 1 x J1708,
4 x isolated DI/DO
36-pin locking type connector
(connect to TREK box), power/wake up button
Audio Built-in 2 watt speaker Built-in 2 watt speaker Built-in 2 watt speaker 2 * 2 watt speakers
WWAN
GPRS : Cinterion TC63i qual-bands
CDMA : Sierrawireless MC5728V
HSPA+ : Cinterion PH8
GPRS : Cinterion MC55i qual-bands
CDMA : Sierrawireless MC5728V
HSPA+: Sierrawireless MC8090/8092
-
Network (LAN) - 1 x 10/100/1000 Mbps -
WLAN - 802.11/b/g/n 802.11b/g/n -
Bluetooth Yes Yes -
Power
12V/24V car power design. DC-input 6V
~ 36V with ISO 7637-2, SAE J1113 &
E-mark
12V/24V car power design. DC-input
6V ~ 36V with ISO 7637-2, SAE
J1113 & E-mark; option to support
48V car power system
12 V 5% (Powered by TREK-5xx/6xx)
Operating Temperature
-20 ~ 60 C (TREK-722)/
-30 ~ 70 C (TREK-723)
-30 C ~ 60 C -30 C ~ 70 C
Vibration/ Shock MIL-STD-810G, EN-60721-3-5 (5M3) MIL-STD-810G, EN-60721-3-5 (5M3) MIL-STD-810G
CE, FCC, UL/cUL, CB, CCC, E-mark,
PTCRB
CE, FCC, UL/cUL, CB, CCC, E-mark,
PTCRB, EN50155
CE, FCC, UL/cUL, CCC
Dimensions (W x H x D)
165 x 115 x 43 mm (TREK-722)/
213 x 145 x 43 mm (TREK-723)
256 x 161 x 56 mm 244 x 160 x 41 mm 212.75 x 141.85 x 35 mm
Weight 0.65 kg (TREK-722)/ 0.85 kg (TREK-723) 2.2 kg 0.8 kg 0.76 kg
ITS/Telematics
2013
All-in-one In-vehicle Computers Smart Display

Model Name TREK-668
Processor
Intel Atom N2600 1.6 GHz
(Dual core)
OS WES7/Win7
Memory Size

DDR3 up to 2GB
Video
CRT
1 x VGA output by DB-15
(supports different content with
LVDS port)
LVDS
1 x (supports different content with
CRT port)
Video in

For surveillance: support up to
12 Video inputs, with 12V/2A
power supply for camera
I/ O Interface
Audio
Mic-in, Line-out, SPK-out, 8
audio input
Ethernet

1 x Giga LAN 10/100/1000 Mbps
Ethernet controller, supports POE
IP camera; compliant IEEE 802.3af
and provides up to 15.4 watts
power output
USB 4 x USB host ports
Serial
Ports

2 x full function RS-232 with DC
Output, 2 x RS-485
DI/O
8 x lsolated dry contact digital
inputs and 4 x isolated relay driver
output
CAN

1 x CAN 2.0 A/B

(J1939 protocol support)
GPS
50-Channel uBlox LEA-6S with
AGPS as default;ublox LEA-6R
with AGPS & dead-reckoning
feature (built-in Gyro & speed line)
as option
WWAN

GPRS : Cinterion MC55i
qual-bands
CDMA : Sierrawireless MC5728V
HSPA+: Sierrawireless
MC8090/8092
(2*SIM, 2*mini-PCIe slot)
Bluetooth Yes
Storage
CF
1 x external-accessible port
(for memory mode only)
SATA 2 x SSD (optional SATA 2.5" MHD)
Power
Requirements
Input
Voltage
12V/24V car power design.
DC-input 9V ~ 32V with ISO
7637-2, SAE J1113 & E-mark
Operating
Temperature
-30 C ~ 60 C
Vibration/ Shock MIL-STD-810G
CE, FCC, UL/cUL, CCC, E-mark,
PTCRB, EN50155
Dimensions
(W x H x D)
346 x 97 x 196.2 mm
Weight 5.7 kg (including 2 HDD)



Model Name PWS-770
Processor
CPU Intel Atom N2600/1.6 GHz
Companion
Chipset
Intel NM10
Memory SODIMM DDRIII to 2 GB
Storage
Supports mSATA SSD
32 GB ~ 128 GB
Display
Size/ Type
10.4" XGA (1024 x 768)
(Transective) LCD
Brightness
(cd/m
2
)
300 cd/m
2
LED back light
Touch Panel 4-wire resistive touch panel
Application Buttons
Power button x 1 ( L side )
Function keys x 3 (F1~F3)
Tablet PC keyboard x 1
Mode key x 1
Enter key x 1
Activate key x 2 ( S1 & S2 ):
Activate barcode reader, CCD
camera & dimming adjustment
required to control the brightness
I/ O Ports
USB 2.0 x 2

Serial port RS-232 x 1

VGA port x 1

Audio in jack x 1

Internal mono microphone x 1

DC-in x 1

Docking port

(32-pin; USB/PCIE/DC)

SIM slot (with WWAN option)
Wireless Communication
802.11b/g/n WLAN built-in with
integrated antenna
Bluetooth class 2, 4.0 built-in
with integrated antennaGPS
(Optional); WWAN (Optional)
Data Collection Modules
CMOS 2.0M pixel Camera
module
1D/2D Barcode; MSR; HF RFID
Dimensions & Weight
264 (L) x 213 mm (W) x
18 (H), Under 1.2 kg without
rubber bumper & optional
devices
Power
Battery
Main battery: 3S1P 11.1V 1900
mAhr
Hot-Swap 2nd battery: 3S2P
11.1V 3760mAh/5000mAh
Power
Adapter
AC Adapter: AC 100V-240V
50/60Hz, 19V/3.42A/65W, Auto
Sensing/Switching worldwide
power supply
Car Adapter: AC 120V-320V
Environment
Operating
Temperature
-10 to 50 C (charging activity
will be active during 0 ~ 40 C
for battery safety)
Storage
Temperature
-20 to +60 C
Operating
Humidity
5% ~ 95% @ 40 C
IP Rating IP-54
Drop
4 foot drop onto plywood,
MIL-STD-810G 516.5 Precedure
VI
OS
Windows 7 Professional /
Embedded
CE/FCC/CCC/BSMI/C-Tick
UL/CE/CB/CCC
Accessories
AC adaptor (19V, 65W)
Stylus (default), Vehicle cradle
VESA Mounting Bracket
Carrying Bag
Hand strap
Desktop stand
MIT-M101
Intel N2930/1.83Ghz
SODIMM DDR3L up to 8GB
Supports mSata SSD
16GB ~32GB

10.1" WXGA (1280x800)
300 cd/m2 LED back light
Projective Capacitive Touch
Power Button x 1
Programmable button #1
Camera snapshot (Default)
Programmable button #2
Windows Key (Default)




USB 3.0 x1
USB 2.0 x2
Micro HDMI x 1
Combo Audio x 1
Docking Connector x 1
Expansion Connector x 1
DC-in x 1








802.11b/g/n WLAN built-in
with integrated antenna
Bluetooth class 2, 4.0 built-in
with integrated antennaGPS
(Optional); WWAN/LTE (Optional)
CMOS 2.0M/5M pixel Camera
module
1D/2D Barcode; MSR; NFC
292 x 196 x 20 mm, 1.1KG
Main battery: 3S2P
11.1V 2860mAh
AC Adapter: AC 100V-240V
50/60Hz, 19V/3.42A/65W,
Auto Sensing/Switching
worldwide power supply
-10C ~ +50C
-30C ~ +70C
5% ~ 95% @ 40C
IP65
4ft drop onto concrete
Windows Embedded 7 & 8
FCC/CE/UL/CB
Office desk docking
Stylus Pen
Add-on Bumper
VESA Mount Kit
Hand strap
Extend Battery





2nd battery
ITS/Telematics
Industrial Tablet In-vehicle Box Computers
TREK-674
Intel Atom Baytrail-I, E3827
(Dual Core, 1.75GHz )
WES7/Win7, WES8/Win8

DDR3L up to 4GB
1 x DB15
(Resolution up to 2560 x 1600)
1 x (supports thought smart display
port 840 x 480 or 1024 x 768)

8-ch Video inputs: support
H.264, MJPEG format;
up to D1, 30fps per channel
Mic-in, Line-out, 1 x Line out
for Speakers on TREK-30x

1 x Giga LAN, with locked-type
RJ45 connector ("Dual Giga LAN"
is project-based.)
1 x USB 3.0, 2 x USB 2.0

1 x Full RS232
1 x RS485 with auto flow control
1 x 4-wire RS-232
4 x Isolated DI (Dry Contact)
2 x Isolated DO (Open collector
output, driving by replay)

2 x CAN Bus 2.0B
(J1939, OBD-II/ISO-15765)

Build-in u-Blox LEA-6S module,
support AGPS. (Dead Reckoning/
Glonass / Calileo/ BeiDou is
project-based.)

HSPA+, GSM/GPRS/EDGE: Sierra
Wireless AirPrime MC809x
CDMA 1xRTT/EV-DO Rev.A: Sierra
Wireless AirPrime MC5728
(2 x external accessible SIM card
socket (selectable) with cover)


Yes
1 x external-accessible Cfast
(support system bootup)
1 x external accessible 2.5"
SSD tray with key-lock protection
Supports 12/24 V car power system.
9V ~ 32V wide DC input,
ISO7637-2 & SAE J1113 compliant
-30 C ~ 70 C
MIL-STD-810G, EN60721-3(5M3)
CE, FCC, CCC, UL/cUL, CB,
E-mark, ISO 7637-2, SAE J1113
294 x 184 x 73 mm
3.6 Kg (TBD)
1 3 Wh a t n e y I r v i n e , C A 9 2 6 1 8 To l l F r e e : 1 - 8 0 0 - 8 6 6 - 6 0 0 8 We b s i t e : w w w. a d v a n t e c h . c o m E ma i l : A C G I n f o @a d v a n t e c h . c o m
Poduct Information
Poduct Information
Model Name TREK-722 TREK-723 TREK-753 TREK-303RH TREK-303DH
Processor TI ARM Cortex-A8 AM3703 800 MHz
Industrial-grade Intel Atom XL
Z510PT 1.1 GHz
(Z520PT 1.3 GHz as option)
-
Design Compatible Models - -
Paired with
TREK-550/ TREK-668
Paired with
TREK-550/ TREK-668
OS WinCE6.0 & optional Android 2.3.4
WES 2009, WinCE6.0 and
Ubuntu Linux 10.04
-
Memory
Size On board 256MB Mobile LPDDR
One 200-pin SODIMM socket,
Supports up to 2 GB DDR2 400/533
memory module
-
Module Type On board LPDDR 1 x 200-pin SODIMM -
Storage
On board NAND type 2GB for boot loader,
operating system & customer apps
1 x push-push type SD slot
1 x external accessible SD slot,
1 x external accessible CF slot
-
Display
Size/Type 5" (16:9) TFT LCD 7" (16:9) TFT LCD 7" (16:9) TFT LCD 7" (16:9) TFT LCD
Max.
Resolution
800 x 480 800 x 480 800 x 480 800 x 480 800 x 480
Max. Colors 262K 262K 262K 262K
Brightness
(cd/m
2
)
350 with TS
(typical)
400 with TS
(typical)
400 with TS (typical) 400 with TS (typical) 400 with TS (typical)
Viewing
Angle (degrees)
70 / 70 / 70 / 50 70 / 70 / 60 / 60 70 / 70 / 60 / 60 70 / 70 / 60 / 60
Backlight MTBF 20,000 hrs 50,000 hrs 50,000 hrs 50,000 hrs
Touchscreen Technology 4-wire resistive type
4-wire resistive type; optional
support for sunlight readable feature
by Low-Reection touch solution
4-wire resistive type
Brightness Control
Built-in light sensor for
auto backlight adjustment
2 x hotkeys in front panel; built-in
light sensor for auto backlight
adjustment
2 x hotkeys in front panel; built-
in light sensor for auto backlight
adjustment
Built-in light sensor
for auto backlight
adjustment
I/ O Ports
2 x USB host, 2 x RS-232, 1 x CAN with
J1939 protocol, 2 x DI/DO
3 x USB host, 2 x RS-232 with DC
Output, 1 x RS-485,
1 x CAN w/ J1939, 1 x J1708,
4 x isolated DI/DO
36-pin locking type connector
(connect to TREK box), power/wake up button
Audio Built-in 2 watt speaker Built-in 2 watt speaker Built-in 2 watt speaker 2 * 2 watt speakers
WWAN
GPRS : Cinterion TC63i qual-bands
CDMA : Sierrawireless MC5728V
HSPA+ : Cinterion PH8
GPRS : Cinterion MC55i qual-bands
CDMA : Sierrawireless MC5728V
HSPA+: Sierrawireless MC8090/8092
-
Network (LAN) - 1 x 10/100/1000 Mbps -
WLAN - 802.11/b/g/n 802.11b/g/n -
Bluetooth Yes Yes -
Power
12V/24V car power design. DC-input 6V
~ 36V with ISO 7637-2, SAE J1113 &
E-mark
12V/24V car power design. DC-input
6V ~ 36V with ISO 7637-2, SAE
J1113 & E-mark; option to support
48V car power system
12 V 5% (Powered by TREK-5xx/6xx)
Operating Temperature
-20 ~ 60 C (TREK-722)/
-30 ~ 70 C (TREK-723)
-30 C ~ 60 C -30 C ~ 70 C
Vibration/ Shock MIL-STD-810G, EN-60721-3-5 (5M3) MIL-STD-810G, EN-60721-3-5 (5M3) MIL-STD-810G
CE, FCC, UL/cUL, CB, CCC, E-mark,
PTCRB
CE, FCC, UL/cUL, CB, CCC, E-mark,
PTCRB, EN50155
CE, FCC, UL/cUL, CCC
Dimensions (W x H x D)
165 x 115 x 43 mm (TREK-722)/
213 x 145 x 43 mm (TREK-723)
256 x 161 x 56 mm 244 x 160 x 41 mm 212.75 x 141.85 x 35 mm
Weight 0.65 kg (TREK-722)/ 0.85 kg (TREK-723) 2.2 kg 0.8 kg 0.76 kg
ITS/Telematics
2013
All-in-one In-vehicle Computers Smart Display

Model Name TREK-668
Processor
Intel Atom N2600 1.6 GHz
(Dual core)
OS WES7/Win7
Memory Size

DDR3 up to 2GB
Video
CRT
1 x VGA output by DB-15
(supports different content with
LVDS port)
LVDS
1 x (supports different content with
CRT port)
Video in

For surveillance: support up to
12 Video inputs, with 12V/2A
power supply for camera
I/ O Interface
Audio
Mic-in, Line-out, SPK-out, 8
audio input
Ethernet

1 x Giga LAN 10/100/1000 Mbps
Ethernet controller, supports POE
IP camera; compliant IEEE 802.3af
and provides up to 15.4 watts
power output
USB 4 x USB host ports
Serial
Ports

2 x full function RS-232 with DC
Output, 2 x RS-485
DI/O
8 x lsolated dry contact digital
inputs and 4 x isolated relay driver
output
CAN

1 x CAN 2.0 A/B

(J1939 protocol support)
GPS
50-Channel uBlox LEA-6S with
AGPS as default;ublox LEA-6R
with AGPS & dead-reckoning
feature (built-in Gyro & speed line)
as option
WWAN

GPRS : Cinterion MC55i
qual-bands
CDMA : Sierrawireless MC5728V
HSPA+: Sierrawireless
MC8090/8092
(2*SIM, 2*mini-PCIe slot)
Bluetooth Yes
Storage
CF
1 x external-accessible port
(for memory mode only)
SATA 2 x SSD (optional SATA 2.5" MHD)
Power
Requirements
Input
Voltage
12V/24V car power design.
DC-input 9V ~ 32V with ISO
7637-2, SAE J1113 & E-mark
Operating
Temperature
-30 C ~ 60 C
Vibration/ Shock MIL-STD-810G
CE, FCC, UL/cUL, CCC, E-mark,
PTCRB, EN50155
Dimensions
(W x H x D)
346 x 97 x 196.2 mm
Weight 5.7 kg (including 2 HDD)



Model Name PWS-770
Processor
CPU Intel Atom N2600/1.6 GHz
Companion
Chipset
Intel NM10
Memory SODIMM DDRIII to 2 GB
Storage
Supports mSATA SSD
32 GB ~ 128 GB
Display
Size/ Type
10.4" XGA (1024 x 768)
(Transective) LCD
Brightness
(cd/m
2
)
300 cd/m
2
LED back light
Touch Panel 4-wire resistive touch panel
Application Buttons
Power button x 1 ( L side )
Function keys x 3 (F1~F3)
Tablet PC keyboard x 1
Mode key x 1
Enter key x 1
Activate key x 2 ( S1 & S2 ):
Activate barcode reader, CCD
camera & dimming adjustment
required to control the brightness
I/ O Ports
USB 2.0 x 2

Serial port RS-232 x 1

VGA port x 1

Audio in jack x 1

Internal mono microphone x 1

DC-in x 1

Docking port

(32-pin; USB/PCIE/DC)

SIM slot (with WWAN option)
Wireless Communication
802.11b/g/n WLAN built-in with
integrated antenna
Bluetooth class 2, 4.0 built-in
with integrated antennaGPS
(Optional); WWAN (Optional)
Data Collection Modules
CMOS 2.0M pixel Camera
module
1D/2D Barcode; MSR; HF RFID
Dimensions & Weight
264 (L) x 213 mm (W) x
18 (H), Under 1.2 kg without
rubber bumper & optional
devices
Power
Battery
Main battery: 3S1P 11.1V 1900
mAhr
Hot-Swap 2nd battery: 3S2P
11.1V 3760mAh/5000mAh
Power
Adapter
AC Adapter: AC 100V-240V
50/60Hz, 19V/3.42A/65W, Auto
Sensing/Switching worldwide
power supply
Car Adapter: AC 120V-320V
Environment
Operating
Temperature
-10 to 50 C (charging activity
will be active during 0 ~ 40 C
for battery safety)
Storage
Temperature
-20 to +60 C
Operating
Humidity
5% ~ 95% @ 40 C
IP Rating IP-54
Drop
4 foot drop onto plywood,
MIL-STD-810G 516.5 Precedure
VI
OS
Windows 7 Professional /
Embedded
CE/FCC/CCC/BSMI/C-Tick
UL/CE/CB/CCC
Accessories
AC adaptor (19V, 65W)
Stylus (default), Vehicle cradle
VESA Mounting Bracket
Carrying Bag
Hand strap
Desktop stand
MIT-M101
Intel N2930/1.83Ghz
SODIMM DDR3L up to 8GB
Supports mSata SSD
16GB ~32GB

10.1" WXGA (1280x800)
300 cd/m2 LED back light
Projective Capacitive Touch
Power Button x 1
Programmable button #1
Camera snapshot (Default)
Programmable button #2
Windows Key (Default)




USB 3.0 x1
USB 2.0 x2
Micro HDMI x 1
Combo Audio x 1
Docking Connector x 1
Expansion Connector x 1
DC-in x 1








802.11b/g/n WLAN built-in
with integrated antenna
Bluetooth class 2, 4.0 built-in
with integrated antennaGPS
(Optional); WWAN/LTE (Optional)
CMOS 2.0M/5M pixel Camera
module
1D/2D Barcode; MSR; NFC
292 x 196 x 20 mm, 1.1KG
Main battery: 3S2P
11.1V 2860mAh
AC Adapter: AC 100V-240V
50/60Hz, 19V/3.42A/65W,
Auto Sensing/Switching
worldwide power supply
-10C ~ +50C
-30C ~ +70C
5% ~ 95% @ 40C
IP65
4ft drop onto concrete
Windows Embedded 7 & 8
FCC/CE/UL/CB
Office desk docking
Stylus Pen
Add-on Bumper
VESA Mount Kit
Hand strap
Extend Battery





2nd battery
ITS/Telematics
Industrial Tablet In-vehicle Box Computers
TREK-674
Intel Atom Baytrail-I, E3827
(Dual Core, 1.75GHz )
WES7/Win7, WES8/Win8

DDR3L up to 4GB
1 x DB15
(Resolution up to 2560 x 1600)
1 x (supports thought smart display
port 840 x 480 or 1024 x 768)

8-ch Video inputs: support
H.264, MJPEG format;
up to D1, 30fps per channel
Mic-in, Line-out, 1 x Line out
for Speakers on TREK-30x

1 x Giga LAN, with locked-type
RJ45 connector ("Dual Giga LAN"
is project-based.)
1 x USB 3.0, 2 x USB 2.0

1 x Full RS232
1 x RS485 with auto flow control
1 x 4-wire RS-232
4 x Isolated DI (Dry Contact)
2 x Isolated DO (Open collector
output, driving by replay)

2 x CAN Bus 2.0B
(J1939, OBD-II/ISO-15765)

Build-in u-Blox LEA-6S module,
support AGPS. (Dead Reckoning/
Glonass / Calileo/ BeiDou is
project-based.)

HSPA+, GSM/GPRS/EDGE: Sierra
Wireless AirPrime MC809x
CDMA 1xRTT/EV-DO Rev.A: Sierra
Wireless AirPrime MC5728
(2 x external accessible SIM card
socket (selectable) with cover)


Yes
1 x external-accessible Cfast
(support system bootup)
1 x external accessible 2.5"
SSD tray with key-lock protection
Supports 12/24 V car power system.
9V ~ 32V wide DC input,
ISO7637-2 & SAE J1113 compliant
-30 C ~ 70 C
MIL-STD-810G, EN60721-3(5M3)
CE, FCC, CCC, UL/cUL, CB,
E-mark, ISO 7637-2, SAE J1113
294 x 184 x 73 mm
3.6 Kg (TBD)
1 3 Wh a t n e y I r v i n e , C A 9 2 6 1 8 To l l F r e e : 1 - 8 0 0 - 8 6 6 - 6 0 0 8 We b s i t e : w w w. a d v a n t e c h . c o m E ma i l : A C G I n f o @a d v a n t e c h . c o m
Poduct Information
Poduct Information
Model Name TREK-722 TREK-723 TREK-753 TREK-303RH TREK-303DH
Processor TI ARM Cortex-A8 AM3703 800 MHz
Industrial-grade Intel Atom XL
Z510PT 1.1 GHz
(Z520PT 1.3 GHz as option)
-
Design Compatible Models - -
Paired with
TREK-550/ TREK-668
Paired with
TREK-550/ TREK-668
OS WinCE6.0 & optional Android 2.3.4
WES 2009, WinCE6.0 and
Ubuntu Linux 10.04
-
Memory
Size On board 256MB Mobile LPDDR
One 200-pin SODIMM socket,
Supports up to 2 GB DDR2 400/533
memory module
-
Module Type On board LPDDR 1 x 200-pin SODIMM -
Storage
On board NAND type 2GB for boot loader,
operating system & customer apps
1 x push-push type SD slot
1 x external accessible SD slot,
1 x external accessible CF slot
-
Display
Size/Type 5" (16:9) TFT LCD 7" (16:9) TFT LCD 7" (16:9) TFT LCD 7" (16:9) TFT LCD
Max.
Resolution
800 x 480 800 x 480 800 x 480 800 x 480 800 x 480
Max. Colors 262K 262K 262K 262K
Brightness
(cd/m
2
)
350 with TS
(typical)
400 with TS
(typical)
400 with TS (typical) 400 with TS (typical) 400 with TS (typical)
Viewing
Angle (degrees)
70 / 70 / 70 / 50 70 / 70 / 60 / 60 70 / 70 / 60 / 60 70 / 70 / 60 / 60
Backlight MTBF 20,000 hrs 50,000 hrs 50,000 hrs 50,000 hrs
Touchscreen Technology 4-wire resistive type
4-wire resistive type; optional
support for sunlight readable feature
by Low-Reection touch solution
4-wire resistive type
Brightness Control
Built-in light sensor for
auto backlight adjustment
2 x hotkeys in front panel; built-in
light sensor for auto backlight
adjustment
2 x hotkeys in front panel; built-
in light sensor for auto backlight
adjustment
Built-in light sensor
for auto backlight
adjustment
I/ O Ports
2 x USB host, 2 x RS-232, 1 x CAN with
J1939 protocol, 2 x DI/DO
3 x USB host, 2 x RS-232 with DC
Output, 1 x RS-485,
1 x CAN w/ J1939, 1 x J1708,
4 x isolated DI/DO
36-pin locking type connector
(connect to TREK box), power/wake up button
Audio Built-in 2 watt speaker Built-in 2 watt speaker Built-in 2 watt speaker 2 * 2 watt speakers
WWAN
GPRS : Cinterion TC63i qual-bands
CDMA : Sierrawireless MC5728V
HSPA+ : Cinterion PH8
GPRS : Cinterion MC55i qual-bands
CDMA : Sierrawireless MC5728V
HSPA+: Sierrawireless MC8090/8092
-
Network (LAN) - 1 x 10/100/1000 Mbps -
WLAN - 802.11/b/g/n 802.11b/g/n -
Bluetooth Yes Yes -
Power
12V/24V car power design. DC-input 6V
~ 36V with ISO 7637-2, SAE J1113 &
E-mark
12V/24V car power design. DC-input
6V ~ 36V with ISO 7637-2, SAE
J1113 & E-mark; option to support
48V car power system
12 V 5% (Powered by TREK-5xx/6xx)
Operating Temperature
-20 ~ 60 C (TREK-722)/
-30 ~ 70 C (TREK-723)
-30 C ~ 60 C -30 C ~ 70 C
Vibration/ Shock MIL-STD-810G, EN-60721-3-5 (5M3) MIL-STD-810G, EN-60721-3-5 (5M3) MIL-STD-810G
CE, FCC, UL/cUL, CB, CCC, E-mark,
PTCRB
CE, FCC, UL/cUL, CB, CCC, E-mark,
PTCRB, EN50155
CE, FCC, UL/cUL, CCC
Dimensions (W x H x D)
165 x 115 x 43 mm (TREK-722)/
213 x 145 x 43 mm (TREK-723)
256 x 161 x 56 mm 244 x 160 x 41 mm 212.75 x 141.85 x 35 mm
Weight 0.65 kg (TREK-722)/ 0.85 kg (TREK-723) 2.2 kg 0.8 kg 0.76 kg
ITS/Telematics
2013
All-in-one In-vehicle Computers Smart Display

Model Name TREK-668
Processor
Intel Atom N2600 1.6 GHz
(Dual core)
OS WES7/Win7
Memory Size

DDR3 up to 2GB
Video
CRT
1 x VGA output by DB-15
(supports different content with
LVDS port)
LVDS
1 x (supports different content with
CRT port)
Video in

For surveillance: support up to
12 Video inputs, with 12V/2A
power supply for camera
I/ O Interface
Audio
Mic-in, Line-out, SPK-out, 8
audio input
Ethernet

1 x Giga LAN 10/100/1000 Mbps
Ethernet controller, supports POE
IP camera; compliant IEEE 802.3af
and provides up to 15.4 watts
power output
USB 4 x USB host ports
Serial
Ports

2 x full function RS-232 with DC
Output, 2 x RS-485
DI/O
8 x lsolated dry contact digital
inputs and 4 x isolated relay driver
output
CAN

1 x CAN 2.0 A/B

(J1939 protocol support)
GPS
50-Channel uBlox LEA-6S with
AGPS as default;ublox LEA-6R
with AGPS & dead-reckoning
feature (built-in Gyro & speed line)
as option
WWAN

GPRS : Cinterion MC55i
qual-bands
CDMA : Sierrawireless MC5728V
HSPA+: Sierrawireless
MC8090/8092
(2*SIM, 2*mini-PCIe slot)
Bluetooth Yes
Storage
CF
1 x external-accessible port
(for memory mode only)
SATA 2 x SSD (optional SATA 2.5" MHD)
Power
Requirements
Input
Voltage
12V/24V car power design.
DC-input 9V ~ 32V with ISO
7637-2, SAE J1113 & E-mark
Operating
Temperature
-30 C ~ 60 C
Vibration/ Shock MIL-STD-810G
CE, FCC, UL/cUL, CCC, E-mark,
PTCRB, EN50155
Dimensions
(W x H x D)
346 x 97 x 196.2 mm
Weight 5.7 kg (including 2 HDD)



Model Name PWS-770
Processor
CPU Intel Atom N2600/1.6 GHz
Companion
Chipset
Intel NM10
Memory SODIMM DDRIII to 2 GB
Storage
Supports mSATA SSD
32 GB ~ 128 GB
Display
Size/ Type
10.4" XGA (1024 x 768)
(Transective) LCD
Brightness
(cd/m
2
)
300 cd/m
2
LED back light
Touch Panel 4-wire resistive touch panel
Application Buttons
Power button x 1 ( L side )
Function keys x 3 (F1~F3)
Tablet PC keyboard x 1
Mode key x 1
Enter key x 1
Activate key x 2 ( S1 & S2 ):
Activate barcode reader, CCD
camera & dimming adjustment
required to control the brightness
I/ O Ports
USB 2.0 x 2

Serial port RS-232 x 1

VGA port x 1

Audio in jack x 1

Internal mono microphone x 1

DC-in x 1

Docking port

(32-pin; USB/PCIE/DC)

SIM slot (with WWAN option)
Wireless Communication
802.11b/g/n WLAN built-in with
integrated antenna
Bluetooth class 2, 4.0 built-in
with integrated antennaGPS
(Optional); WWAN (Optional)
Data Collection Modules
CMOS 2.0M pixel Camera
module
1D/2D Barcode; MSR; HF RFID
Dimensions & Weight
264 (L) x 213 mm (W) x
18 (H), Under 1.2 kg without
rubber bumper & optional
devices
Power
Battery
Main battery: 3S1P 11.1V 1900
mAhr
Hot-Swap 2nd battery: 3S2P
11.1V 3760mAh/5000mAh
Power
Adapter
AC Adapter: AC 100V-240V
50/60Hz, 19V/3.42A/65W, Auto
Sensing/Switching worldwide
power supply
Car Adapter: AC 120V-320V
Environment
Operating
Temperature
-10 to 50 C (charging activity
will be active during 0 ~ 40 C
for battery safety)
Storage
Temperature
-20 to +60 C
Operating
Humidity
5% ~ 95% @ 40 C
IP Rating IP-54
Drop
4 foot drop onto plywood,
MIL-STD-810G 516.5 Precedure
VI
OS
Windows 7 Professional /
Embedded
CE/FCC/CCC/BSMI/C-Tick
UL/CE/CB/CCC
Accessories
AC adaptor (19V, 65W)
Stylus (default), Vehicle cradle
VESA Mounting Bracket
Carrying Bag
Hand strap
Desktop stand
MIT-M101
Intel N2930/1.83Ghz
SODIMM DDR3L up to 8GB
Supports mSata SSD
16GB ~32GB

10.1" WXGA (1280x800)
300 cd/m2 LED back light
Projective Capacitive Touch
Power Button x 1
Programmable button #1
Camera snapshot (Default)
Programmable button #2
Windows Key (Default)




USB 3.0 x1
USB 2.0 x2
Micro HDMI x 1
Combo Audio x 1
Docking Connector x 1
Expansion Connector x 1
DC-in x 1








802.11b/g/n WLAN built-in
with integrated antenna
Bluetooth class 2, 4.0 built-in
with integrated antennaGPS
(Optional); WWAN/LTE (Optional)
CMOS 2.0M/5M pixel Camera
module
1D/2D Barcode; MSR; NFC
292 x 196 x 20 mm, 1.1KG
Main battery: 3S2P
11.1V 2860mAh
AC Adapter: AC 100V-240V
50/60Hz, 19V/3.42A/65W,
Auto Sensing/Switching
worldwide power supply
-10C ~ +50C
-30C ~ +70C
5% ~ 95% @ 40C
IP65
4ft drop onto concrete
Windows Embedded 7 & 8
FCC/CE/UL/CB
Office desk docking
Stylus Pen
Add-on Bumper
VESA Mount Kit
Hand strap
Extend Battery





2nd battery
ITS/Telematics
Industrial Tablet In-vehicle Box Computers
TREK-674
Intel Atom Baytrail-I, E3827
(Dual Core, 1.75GHz )
WES7/Win7, WES8/Win8

DDR3L up to 4GB
1 x DB15
(Resolution up to 2560 x 1600)
1 x (supports thought smart display
port 840 x 480 or 1024 x 768)

8-ch Video inputs: support
H.264, MJPEG format;
up to D1, 30fps per channel
Mic-in, Line-out, 1 x Line out
for Speakers on TREK-30x

1 x Giga LAN, with locked-type
RJ45 connector ("Dual Giga LAN"
is project-based.)
1 x USB 3.0, 2 x USB 2.0

1 x Full RS232
1 x RS485 with auto flow control
1 x 4-wire RS-232
4 x Isolated DI (Dry Contact)
2 x Isolated DO (Open collector
output, driving by replay)

2 x CAN Bus 2.0B
(J1939, OBD-II/ISO-15765)

Build-in u-Blox LEA-6S module,
support AGPS. (Dead Reckoning/
Glonass / Calileo/ BeiDou is
project-based.)

HSPA+, GSM/GPRS/EDGE: Sierra
Wireless AirPrime MC809x
CDMA 1xRTT/EV-DO Rev.A: Sierra
Wireless AirPrime MC5728
(2 x external accessible SIM card
socket (selectable) with cover)


Yes
1 x external-accessible Cfast
(support system bootup)
1 x external accessible 2.5"
SSD tray with key-lock protection
Supports 12/24 V car power system.
9V ~ 32V wide DC input,
ISO7637-2 & SAE J1113 compliant
-30 C ~ 70 C
MIL-STD-810G, EN60721-3(5M3)
CE, FCC, CCC, UL/cUL, CB,
E-mark, ISO 7637-2, SAE J1113
294 x 184 x 73 mm
3.6 Kg (TBD)
1 3 Wh a t n e y I r v i n e , C A 9 2 6 1 8 To l l F r e e : 1 - 8 0 0 - 8 6 6 - 6 0 0 8 We b s i t e : w w w. a d v a n t e c h . c o m E ma i l : A C G I n f o @a d v a n t e c h . c o m
22 EMBEDDED SYSTEMS ENGINEERING February 2014
engineers guide to TRANSPORTATION
schedules, tips for changing trains, last-
minute route changes or delays. Tey can
also provide weather forecasts, news of
the day and entertainment in the form
of TV, movies or music. Content servers
used to store data and programming
connect to screens within the vehicle
via wired LAN or WLAN. Te servers
connect to the outside world via various
wireless standards, to receive up-to-date
information even while traveling.
OTHER COMMUNICATIONS
FUNCTIONS
Beyond safety-critical control and
passenger entertainment features, vehicle-
mounted computers can support other
communications-based functions, such as
surveillance of passenger compartments
and doors in trains, subways and street-
cars. Digital video recorders capture closed
circuit television (CCTV) images to disk
and store collected event data.
ANSWERING EXTREME
ENGINEERING CHALLENGES
Te new developments in American rail
service ofer both challenges and rewards
for embedded systems designers qualifed
to address extremes of design and perfor-
mance according to relevant standards,
such as ANSI/ISA S84 or IEC61508.
Any computer system developed and
manufactured according to railway
standards must be robust and reliable,
even if only for non-critical services
such as heating or interior lighting.
But the most extreme safety-critical
taskssuch as locomotion, braking and
train controldemand special design
strategies such as hardware redundancy
and complex software to deliver a higher
safety integrity level (SIL).
For SIL4 operation in rail applications, a
COTS single-board computer can provide
a triple-redundant, 2-out-of-3 system, yet
still be programmed like a single-CPU/
memory system. Two identical SBCs
connected in a cluster form a safe I/O
concept. All processors run the same pro-
gram in lockstep mode and perform the
same tasks simultaneously, while a voter
compares the output of all processors.
Working memory is triple-redundant,
while ECC-secured fash and local power
supplies are dual-redundant. All critical
functions are implemented as IP cores in
an FPGA that also features triple-redun-
dant structures. And for increased safety
and availability, additional diagnostic
mechanisms help to detect latent errors
before they lead to a system error.
Since 1992, Barbara Schmitz has served
as chief marketing ofcer of MEN Mikro
Elektronik. Schmitz graduated from the Uni-
versity of Erlangen-Nrnberg. MEN Mikro
Elektronik is an established manufacturer of
failure-safe computer boards and systems for
extreme environmental conditions in indus-
trial, safety-critical and real-time embedded
applications worldwide.
The Federal Railroad
Administration (FRA) is
encouraging the industry
to implement Intelligent
Railroad Systems
including new sensor,
computer and digital
communications
technologiesas integrated
solutions that will compound
the benets for train control,
braking systems, grade
crossing safety and
defect detection.
www.eecatalog.com/transportation EMBEDDED SYSTEMS ENGINEERING 23
engineers guide to TRANSPORTATION
F
or C programmers working on safety-critical applications, following
restrictions and guidelines to ensure safe-coding practices can be painful.
Features of the language designed to make your work easier and more ef-
cient, or to provide work-arounds for obstacles are often just the features
that the guidelines disallow. However, the life and death risk of safety-
critical applications whether for fight, high-speed rail, medical devices or
nuclear power plants demand problem-free software. Te risks prohibit
taking chances.
Because of this, many industries choose to adhere to appropriate coding
rules. Although the industry standards do not prescribe adoption of MISRA
C, it has become the de facto programming standard for all safety-critical
software. Te newest version of MISRA C ofers new hope for programmers
by permitting more fexible use of the language while retaining the MISRA
reputation as the safest C guideline available.
Te automotive industry has undergone a signifcant transformation with
the increased use of electronic systems. Defects in the software driving these
systems directly afect vehicle safety. Standards such as ISO 26262 help the
automotive industry comply with the specifc needs of the electrical, electronic
and programmable electronic (E/E/PE) systems of road vehicles. And adher-
ence to appropriate coding rules is one of the key demands of ISO 26262.
ISO 26262 is a relative newcomer as far as safety standards are concerned,
although it shares a common ancestry with standards used in other safety-
critical sectors (Figure 1). While it provides a sound framework in which to
develop functionally safe automotive applications, it stops short of dictating
exactly how that should
be done. Automotive
developers often follow
in-house templates, but
with the increase in
the amount of safety-
critical electronics in
todays vehicles, com-
bined with the increasing
cost of litigation if
software quality eforts
cannot be proven, many
MISRA C:2012 : Ideal for
Life-and-Death Applications
The newest version of MISRA lets developers of safety-
critical applicationssuch as flight, high-speed rail, medical
devices or nuclear power plantstake advantage of more C
features while helping them mitigate risk.
By Chris Tapp and Mark Pitchford, LDRA
of these developers are now looking at
recognized outside guidelines.
Te medical space is another industry
where standards compliance lags
behind other industries in proactively
implementing certifcation. However,
the consequences for defective medical
applications can be considerable. Witness
the recent recall of Baxter Healthcares
infusion pumps in 2010. Tis cost the
company in the neighborhood of US$400
to US$600 million.
Consequences like these have increased
the call for application of best-practice
and coding standards. And this has
given rise to IEC 62304, the interna-
tional standard for software lifecycle
processes in medical device software,
which has been adopted by both Europe
and the United States. Although rela-
tively new, IEC 62304 is based on IEC
61508, a generic standard for safety-
related systems frst published in 1998.
Consequently, hundreds of applications
have used MISRA coding rules for IEC
61508 compliance and other related
industry-specifc standards for railway,
nuclear, and process industries.
Given the world-class reputation MISRA
has established in programming excel-
lence, these newer industry standards
are simply adopting MISRA as a proven
way to obliterate errors. Obviously, if it
has stood the test of time in industrial
safety and avionics, then it can do so for
them as well.
MISRA-checked code
has fewer defects and
it is more maintainable,
readable, consistent
and veriable.
Figure 1: Standards developed from the generic IEC
61508 standard
www.rtd.com sales@rtd.com RTD Embedded Technologies, Inc.
Copyright 2014 RTD Embedded Technologies, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective companies. RTD is AS9100 and ISO9001 Certified, and a GSA Contract Holder.
A
S
9
1
0
0
- ISO
9
0
0
1
C
E
R
TIF
IE
D
Rugged Boards & Solutions
At RTD, designing and manufacturing
rugged, top-quality boards and system
solutions is our passion. As a founder of
the PC/104 Consortium back in 1992, we
moved desktop computing to the embed-
ded world.
Over the years, we've provided the lead-
ership and support that brought the lat-
est signaling and I/O technologies to
the PC/104 form factor. Most recently,
we've championed the latest specifica-
tions based on stackable PCI Express:
PCIe/104 and PCI/104-Express.
With our focused vision, we have devel-
oped an entire suite of compatible boards
and systems that serve the defense, aero-
space, maritime, ground, industrial and
research arenas. But don't just think about
boards and systems. Think solutions.
That is what we provide: high-quality,
cutting-edge, concept-to-deployment, rug-
ged, embedded solutions.
Whether you need a single board, a stack
of modules, or a fully enclosed system,
RTD has a solution for you. Keep in mind
that as an RTD customer, you're not just
working with a selection of proven, quality
electronics; you're benefitting from an en-
tire team of dedicated engineers and man-
ufacturing personnel driven by excellence
and bolstered by a 28-year track record of
success in the embedded industry.
If you need proven COTS-Plus solutions,
give us a call. Or leverage RTD's innova-
tive product line to design your own em-
bedded system that is reliable, flexible, ex-
pandable, and serviceable in the field for
the long run. Contact us and let us show
you what we do best.
We know PCIe/104.
And we do it best.
www.rtd.com sales@rtd.com RTD Embedded Technologies, Inc.
Copyright 2014 RTD Embedded Technologies, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective companies. RTD is AS9100 and ISO9001 Certified, and a GSA Contract Holder.
A
S
9
1
0
0
- ISO
9
0
0
1
C
E
R
TIF
IE
D
Rugged Boards & Solutions
At RTD, designing and manufacturing
rugged, top-quality boards and system
solutions is our passion. As a founder of
the PC/104 Consortium back in 1992, we
moved desktop computing to the embed-
ded world.
Over the years, we've provided the lead-
ership and support that brought the lat-
est signaling and I/O technologies to
the PC/104 form factor. Most recently,
we've championed the latest specifica-
tions based on stackable PCI Express:
PCIe/104 and PCI/104-Express.
With our focused vision, we have devel-
oped an entire suite of compatible boards
and systems that serve the defense, aero-
space, maritime, ground, industrial and
research arenas. But don't just think about
boards and systems. Think solutions.
That is what we provide: high-quality,
cutting-edge, concept-to-deployment, rug-
ged, embedded solutions.
Whether you need a single board, a stack
of modules, or a fully enclosed system,
RTD has a solution for you. Keep in mind
that as an RTD customer, you're not just
working with a selection of proven, quality
electronics; you're benefitting from an en-
tire team of dedicated engineers and man-
ufacturing personnel driven by excellence
and bolstered by a 28-year track record of
success in the embedded industry.
If you need proven COTS-Plus solutions,
give us a call. Or leverage RTD's innova-
tive product line to design your own em-
bedded system that is reliable, flexible, ex-
pandable, and serviceable in the field for
the long run. Contact us and let us show
you what we do best.
We know PCIe/104.
And we do it best.
26 EMBEDDED SYSTEMS ENGINEERING February 2014
engineers guide to TRANSPORTATION
MORE TIME CODING AND LESS
TIME ON COMPLIANCE
MISRAa subset of the C language
created in the 1990s by the Ford Motor
Company and the Rover Grouphas
become a coding foundation for many
safety-critical industries. MISRA C was
originally released in 1998 (MISRA
C:1998) to target C90, and it was
superseded in 2004 (MISRA-C:2004) to
include a host of extensions and improve-
ments to the original. While MISRA C is
actually a language subset, not a coding
standard, it provides a sound basis for
coding best practices. Over the years,
MISRA C has gained widespread accep-
tance in safety-, life- and mission-critical
applications and is widely referred to as
the MISRA standard.
MISRA ofers a straightforward way to
ensure that a medical device meets the
call of IEC 62304 to consistently achieve
the desired code characteristics.
3
Fol-
lowing the new rules helps programmers
mitigate software-related risks for
medical applications. Although MISRA
C:2012 ofers an excellent interpreta-
tion of the IEC 62304 coding standard
requirements, its use is not compulsory.
In-house rules are often added to the
MISRA set and conversely there may
be justifcation for not including some
MISRA rules. Both circumstances can be
accommodated in a compliant system,
and the improved rules-checking tools
will permit a language subset to be based
on MISRA C:2012 without being entirely
or uniquely compliant to it. (Figure 2).
Te new MISRA C aims to make develop-
ment as predictable as possible, across
projects or pieces of code, without
errors of interpretation. Repeatability
and predictability are key drivers. Even
a dispersed development teamsuch
as a prime contractor with many sub-
contractorsthat follows the MISRA
guidelines can be confdent that all of
the code will be consistent across the
project. Following the new guidelines,
whether classifed as rules or direc-
tives, helps programmers mitigate
software-related risks for safety-critical
applications. Ultimately, it allows them
to spend more time coding and less time
on compliance eforts.
WHAT HAS MISRA DONE FOR YOU
LATELY?
In MISRA C:2012, guidelines have been
made more precise so that the standard
will not prevent reasonable uses or
behaviours that have no undesirable
consequences. Tis will be good news
for developers who may have been frus-
trated in the past by rules that were more
restrictive than was necessary.
Instead of MISRA C:2004s use of the
term rule, MISRA C:2012 subdivides
guidelines into rules and directives
where a directive is a guideline for which
it is not possible to provide the full
description necessary to perform a check
for compliance.
Te new MISRA standard further
defnes rules as applying to a system
or single translation unit analysis.
And all guidelines now include detailed
rationale, which should help developers
understand the need for each of them,
rather than leaving them to speculate on
the rules intent.
Te updated version also tells developers
if a rule is decidablethose against
which an analysis tool can always
determine compliance or non-com-
plianceversus undecidable, where
a person must make an assessment
(generally due to pointer or data values
afecting control fow) (Figure 3). Unde-
cidable rules can result in false-positive
or false-negative test results simply
because the tool has inadequate infor-
mation available to it during analysis.
Tis improvement in rules defnition sig-
nifcantly reduces manual code-review
requirements, and lets developers know
ahead of time if another method of
testing should be used.
MISRA C:2012 OFFERS A
REASONED APPROACH
Lets look at some specifc examples of
programming approaches that are now
Certications calling for use
of Programming Standard
AutomotiveISO 26262
AvionicsDO-178B/C
Industrial SafetyIEC 61508
MedicalIEC 62304
MilitaryDO-178B/C
NuclearIEC 61880
RailEN 50128
Figure 2: LDRAs TBvision and TBrules both allow MISRA standards to be used as
the basis for company- or project-specific rule sets, so that in-house rules can be
added and selected MISRA rules disabled. LDRA supports all versions of MISRA
for both legacy and new development projects.
www.eecatalog.com/transportation EMBEDDED SYSTEMS ENGINEERING 27
engineers guide to TRANSPORTATION
addressed with the more user-friendly
MISRA C:2012.
Freeing memory: aka, being too clever
for your own good
In some instances, developers have
freed memory that is automatically
allocated to variables for use elsewhere.
Tis is legitimate C syntax, but is dan-
gerous. Te new MISRA rule prevents
developers from being too clever for
their own good. In this case, the rule
states that a block of memory shall only
be freed if it was allocated by means of a
standard library function.
void fn ( void )
{ int32_t a;
free ( &a ); /* Non-compliant - a does not
point to allocated storage */ }
MISRA C:2012 defnes guidelines as
Required, Advisory or as a new Man-
datory category, and this memory rule,
for instance, is an example of a Manda-
tory rule that must never be broken
(Figure 4). Required and Advisory guide-
lines can be broken with varying degrees
of justifcation required, so that an
Advisory rule might be at a program-
mers discretion, while Required might
require the approval of a manager.
THE RATIONALE BEHIND THE
GUIDELINES
Te previous versions of MISRA dictated
what should be done, ofering no ratio-
nale to explain the rules intention. Tis
new version enhances the concept of
rationale, providing descriptions that
explain why each guideline is a good idea.
For instance, it is now a requirement
that typedefs that indicate size and
signedness should be used in place of the
basic numerical types. For example, on a
32-bit C90 implementation the following
defnitions might be suitable:
typedef signed char int8_t;
typedef signed short int16_t;
typedef signed int int32_t;
typedef signed long int64_t;
From the perspective of portability, the
rationale debunks the possible false per-
ception that adherence to this guideline
guarantees portability because the size
of the int type may determine whether
or not an expression is subject to integral
promotion. For example, an expression
with type int16_t will not be promoted
if int is implemented using 16 bits but
will be promoted if int is implemented
using 32 bits. In other words, the ratio-
nale helps guide the developer around a
common pitfall.
NOT ALL GOTO STATEMENTS
ARE EVIL!
All too often, goto statements are used to
patch up fuzzy thinking or an ill-defned
algorithm. Indeed, there are situations
where the use of the goto statement is
justifed. For example, if there is an emer-
Reasons For A New
MISRA Version
Any updated coding practices or
standards require developers to learn
new guidelines and update their tools
and programming methodologies.
But this short-term inconvenience
is outweighed by the advantages of
updates that improve existing rules,
extend support to the latest version
of the language, and reduce develop-
ment eforts overall. MISRA C:2012
was designed to:
Extend the coding guidelines to
embrace unsafe elements of C99
while retaining support for C90
Support and enhance the improved
defnition of undefned or unspeci-
fed behavior in C99
Correct issues found in the
2004 version
Provide backwards compatibility
as much as possible to make it
unnecessary to modify code when
moving from MISRA C:2004 to
MISRA C:2012
Ensure all guidelines include a
detailed rationale and remove rules
without strong rationale
Increase the number of decidable
rules to allow better tool enforce-
ment and reduce the amount of
manual checking, saving time
and money
Include guidance on the applicabil-
ity of guidelines to automatically
generated code
Figure 3: The TBvision automated test tool can identify decidable MISRA C:2012
rule violations. It provides hyperlinks to the offending code and to descriptions of
the violations to help in their resolution. Such convenience complements the more
user-friendly nature of this latest MISRA standard.
28 EMBEDDED SYSTEMS ENGINEERING February 2014
engineers guide to TRANSPORTATION
gency situation in a guidance algorithm,
it is better to take a direct route via a
goto. Teres not time to set a fag and
check its status later in the loop. Because
of this, the goto statement should not be
used rule is now advisory rather than
required, and an additional two rules
narrow down the circumstances under
which it is acceptable:
Te goto statement shall jump to a label
declared later in the same function.
Any label referenced by a goto statement
shall be declared in the same block, or in
any block enclosing the goto statement.
AUTO-GENERATED CODE NEEDS
CHECKING, TOO
Auto-generated code, often used for auto-
motive applications, is still written by a
software developer, whether as templates
or hand-coded S models. Ensuring
that the generated code complies with
a language subset (such as MISRA AC)
confrms that there are no errors in that
manual implementation that afect the
quality of the auto-generated source
code. Te auto-generated rule set difers
from that in hand-written C for a number
of reasons. For example, auto-generated
code can use variable names that are
indistinguishable to human eyes but are
still sufciently unique for their purpose.
Tere are also occasions when auto-gener-
ated code is required to do the opposite of
handwritten code. For instance, MISRA
C rules dictate that a default statement
should always be written into a case
statement. Te MISRA AC equivalent
insists on the opposite because an auto-
code generator cannot decide what the
default action should be; the necessary
addition to implement the default has to be added manually. Te
MISRA language subsets ofer a path for any developer to take full
advantage of their chosen language without limiting functionality.
MISRA C:2012 AND BEYOND
Although MISRA C:2012 provides an ideal basis for a language subset for
any safety-critical application, ISO 26262 (automotive) and IEC 62304
(medical) do not dictate exactly what coding rules should be applied. With
the right tools to help, development teams gain the fexibility to fne-tune
the rule set to the requirements of a particular project by extending it
with additional in-house rules or, with appropriate justifcation, by dis-
abling selected MISRA rules (Figure 5). For example, Lockheed-Martin
took this approach for the Joint Strike Fighter when they developed the
JSF++ AV rules set based on the MISRA C++:2008 standard.
MISRA HELPS MEET CODING BEST PRACTICES
MISRA, in all its favors, was developed to help software development teams create
software applications of the highest quality. MISRA-checked code has fewer defects
and it is more maintainable, readable, consistent and verifable. Essentially, MISRA
is about applying best practices in coding, a principle underlined by the references
to appropriate coding rules in ED-12C, DO-178C, IEC 62304, ISO 26262, etc. Under-
standing and meeting the requirements of MISRA C:2012 can help you meet high
software-quality assurance requirements while allowing you to make better deci-
sions about features of the programming language.
Test tools that support MISRA compliance should allow you to easily choose between
versions of the standard (C, C++, Java) and appropriate subset (MISRA C:2004 for
legacy and MISRA C:2012 for new projects), and should allow you to choose full compli-
ance or a user-defned subset of rules that meet in-house templates or requirements.
http://www.fda.gov/NewsEvents/Newsroom/PressAnnouncements
http://www.baxter.com/press_room/
press_releases/2010/05_03_10_colleague.html
Committee on the Public Health Effectiveness of the FDA 510(k) Clearance Process, Institute
of Medicine. Appendix D: Trustworthy Medical Device Software. Public Health Effectiveness
of the FDA 510(k) Clearance Process: Measuring Postmarket Performance and Other Select
Topics: Workshop Report. Washington, DC: The National Academies Press, 2011.
Chris Tapp is a feld applications engineer at LDRA with more than 20 years expe-
rience of embedded software development. He has been involved with MISRA since
2001 and is currently chairman of the MISRA C++ working group and an active
member of the MISRA C working group. He has been with LDRA since 2007, where
he specialises in programming standards.
Mark Pitchford has over 25 years experience in software development for engi-
neering applications. He has worked on many signifcant industrial and commercial
projects in development and management, both in the UK and internationally in-
cluding extended periods in Canada and Australia. Since 2001, he has specialised
in software test, and works throughout Europe and beyond as a feld applications
engineer with LDRA.
Figure 4: MISRA C:2012 introduces a Mandatory category for
rules which must never be broken, to complement the existing
Required and Advisory categories. As illustrated, the TBvision
automated compliance checking tool can summarise information
on any identified violations.
www.eecatalog.com/transportation EMBEDDED SYSTEMS ENGINEERING 29
engineers guide to TRANSPORTATION
T
he power of machine-to-machine (M2M) technology is driving towards a
more connected world. All kinds of machines are getting connected to the
Internet of Things to deliver the promise of enhanced productivity and to bolster
the performance of businesses.
Te evolving realms of technology are revolutionizing many industries. Te automo-
tive industry is trending towards intelligent cars that are fully connected in order
to achieve vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) communica-
tion for improved safety. Fleet management companies are utilizing M2M systems
to monitor operational performance and service efciency using real-time feet
tracking. Smart technology is enabling improved supply chain systems in industries
such as vending and service.
Reliable non-stop connectivity requires that these systems support a wide array of
wireless capability. Tis means machines are getting packed with Bluetooth, Blue-
tooth Low Energy (BLE) and Wi-Fi for personal or local network connection; Cellular
protocols such as 2G, 3G, 4G and LTE for wide-area network connection; and global
navigation satellite systems (GNSS) such as GPS, Galileo, Glonass and Beidou to sup-
port location-based services. Tis demand for added capability pushes toward higher
system-level sophistication which can create challenges.
CHALLENGES OF TRADITIONAL
M2M SYSTEMS
Traditionally, embedded M2M systems
come with a black box containing connec-
tivity features, control circuitry, power
supply circuitry, wireless radios and
other functions. Te black box then con-
nects to the bus system and/or a power
source within the machine to allow the
M2M system to run. Many connected
machines in the feld are metallic (exam-
ples include vehicles, vending machines,
generators and containers). On these
metallic structures, the antenna for the
M2M system must be installed on the
outside of the machine to maximize
the system performance. As such, the
Smart Antennas Drive
Evolution in M2M and
Automotive Applications
Smart antennas provide the capability to co-locate
the antenna and black-box functionality for better
performance and lower cost.
By Jason Furr and Vidhya Dharmarajan, Laird Technologies
Figure 1: Vending machine in a traditional M2M system
antennas for the M2M system are in a
diferent physical location than the black
box and are connected to the black box
via RF cables (as seen in Figure 1).
Even though this architecture is used
on many M2M systems, it poses several
potential system concerns. First, RF
cables inherently have loss; the longer the
cable, the more antenna gain lost between
the black box and the antenna negatively
afecting system performance. Second,
there are two cost implications. Running
multiple RF cables increases the total cost
of the system, especially if the distance
between the black box and the antenna
is large. Additionally, as more technology
gets added to the M2M system, more
cables need to be run, which also adds cost
and complexity. Finally, with more cables
and more connectors within the system
there are increased installation costs and
higher risk of intermittent connection
failures. For example, in heavy equipment
and automobiles that are prone to vibra-
tion, there could be higher instances of
connector or cable damage resulting in
loss of data.
SMART ANTENNAS MAXIMIZE
EFFICIENCY, MINIMIZE COST
One way to reduce system cost and
improve efciency in embedded M2M
applications is to re-think the archi-
tecture of an embedded M2M system.
Instead of depending on the black box
to perform all of the critical tasks of the
system, a system designer could pull the
wireless portion of the design in to the
antenna. Tis concept can be referred to
as a smart antenna design.
Smart antennas provide an option to co-
locate the antenna and some of the black
box device functionality (mainly radios)
into the antenna package. A single
digital cable can then be run from the
smart antenna to the depopulated black
box. See Figure 2 for an example of how
a smart antenna could be architected to
work in a vehicle environment.
Te embedded M2M system then
becomes more efcient as the loss of data
between the antenna and the black box
is minimized with a digital cable versus
30 EMBEDDED SYSTEMS ENGINEERING February 2014
engineers guide to TRANSPORTATION
multiple coaxial cables. Digital signals
can utilize error-correction software and
are more resistant to electromagnetic
noise and signal attenuation than analog
signals. Additionally, cellular systems
are evolving quickly and other wire-
less standards continue to get updated.
Customers not only want to upgrade
their systems from 2G to 3G and 4G
but also want to add the most cutting-
edge wireless functionality (i.e., BLE
and Wi-Fi Direct). When the technology
evolves, it drives hardware and software
changes. Tese hardware and software
changes then need to be re-validated
and re-certifed. By moving the wireless
functionality into the antenna, the core
black box no longer needs to evolve as
quickly as the wireless market pushes.
Te smart antenna can truly act as the
data pipe and the black box can focus on
its key functionality.
FINDING THE RIGHT FIT
While a number of market players pro-
vide smart antenna solutions, not all
of them are successfully able to address
all of the challenges. Getting the design
right is the frst step.
Because the smart antenna packages
additional components into the antenna,
the size of the smart antenna may be
larger than a regular antenna. Space and
styling constraints on certain equipment
will not allow larger smart antenna
packages than typical antenna sizes. For
instance, the styling of a vehicle is very
important to vehicle OEMs. It is critical
that the smart antenna is created with the
customers or system integrators guide-
lines in mind.
Depending upon where the smart antenna
is located on the subject equipment,
there could be more stringent environ-
mental challenges. Electronics that were
once hidden inside of the equipment are
now located outside of the equipment
in the antenna package Tis may create
additional challenges with temperature,
humidity, water ingress or a variety of
other environmental factors.
Moving the radios from the black box into
the antenna could pose frmware chal-
lenges. Typically the black box has been
seen as the brain of the system with the
antenna being the afterthought. When
moving some of the electronics away from
the black box to the antenna, it is critical
to understand how information will be passed from the smart antenna to the black
box. No longer is there just an RF signal coming from the antenna. Depending on
the complexity of the smart antenna design, there could be RF data, location data
and machine bus information passing over a digital line. In this case, there will be
some frmware required within the smart antenna. If these issues are not addressed
correctly during the system design phase, persuading system integrators to adopt
smart antenna architecture will be a challenge.
Although challenges exist, the adoption of smart antenna technology in to the
embedded M2M system space could lead to more efcient systems for companies
looking to maximize performance while controlling initial capital expense and long
term system evolution costs.
Jason Furr is global sales manager for Laird, where he focuses on generating new
business in the growing telematics & M2M markets. Jason holds a bachelors degree
in business from Te University of Michigan-Dearborn and an MBA from Michigan
State University.
Vidhya Dharmarajan is a techni-
cal writer for Laird, where she is
responsible for creating, rening and
maintaining product documents
and writing white papers, market re-
search and competitor analysis for the
Telematics business group. Vidhya
holds a masters degree in VLSI De-
sign from San Jose State University in
California.
Figure 3: Example of smart antenna for vending machine
Figure 2: Smart antenna architecture
for vehicle
engineers guide to TRANSPORTATION
www.eecatalog.com/transportation HARDWARE | EMBEDDED SYSTEMS ENGINEERING 31
CONTACT INFORMATION
MEN Micro Inc.
LinkedIn:
http://www.linkedin.com/company/men-micro-inc
Follow us: https://twitter.com/MENMicro
Become a fan: www.facebook.com/MENMicro
Watch the latest videos:
www.youtube.com/user/MENGermany
Learn our markets: www.slideshare.net/MENmicro
G204: 3U CompactPCI
Serial Carrier Card
Compatible / Supported Operating Systems: Windows Embedded,
Embedded Linux
MEN Micros new G204 is a 3U CompactPCI Serial carrier
card with an M-Module slot.
An easy way to integrate exible I/O, the M-Module slot
provides users with the ability to interchange more than
30 I/O functions within a system. The M-Module, which
needs only one CompactPCI Serial slot, is screwed tightly
onto the G204 and requires no separately mounted
transition panel.
Designed to combine fast CompactPCI Serial technology
with exible I/O options, the new board serves as the
basis for powerful 19-based system solutions for
transportation and industrial applications, such as data
acquisition, process control, automation and vehicle
control, robotics or instrumentation.
The new modular mezzanine card operates in the
extended temperature range of -40C to +85C for harsh
environments.
FEATURES & BENEFITS
3U CompactPCI carrier card
1 M-Module slot
-40C to +85C operating temperature with
qualied components
32-bit/33-MHz PCIe-to-M-Module bridge
Also available with conduction cooling in MEN CCA frame
TECHNICAL SPECS
FPGA-based
EMC Conformity: EN 55022 (radio disturbance), IEC
61000-4-2 (ESD), IEC 61000-4-3 (electromagnetic eld
immunity), IEC 61000-4-6 (conducted disturbances)
B
o
a
r
d
s
B
o
a
r
d
s

MEN Micro Inc.
24 North Main Street
Ambler, PA 19002
USA
215-542-9575
sales@menmicro.com
www.menmicro.com
engineers guide to TRANSPORTATION
32 EMBEDDED SYSTEMS ENGINEERING | HARDWARE January 2014
CONTACT INFORMATION
SIE Computing Solutions
SIE Computing Solutions
10 Mupac Drive
Brockton, MA 02301
USA
800.926.8722 Toll Free
508.588.6110 Telephone
508.588.0498 Fax
www.sie-cs.com
716 Conduction Cooled
ATR Enclosures
VME bus Variant: VME, VME64X, VXS, VPX, OpenVPX, cPCI
716 Conduction Cooled ATR Enclosures
Engineered for strength, light weight, and maximum
cooling in a conduction cooled environment, the 716
Series incorporates a unique frame and congurable
conducting walls that allow the ATR to be tailored to
meet a wide range of thermal requirements.
FEATURES & BENEFITS
Expansive range of ARINC sizes
Easily congurable for custom sizes
Modular power supply
AC or DC ltered inputs
TECHNICAL SPECS
System Performance Monitoring
Multiple Bus Architectures
Cold Start Heaters
Avionics Isolation Tray
Congurable I/O Panel
AVAILABILITY
Now
E
n
c
l
o
s
u
r
e
s
E
n
c
l
o
s
u
r
e
s
engineers guide to TRANSPORTATION
www.eecatalog.com/transportation HARDWARE | EMBEDDED SYSTEMS ENGINEERING 33
CONTACT INFORMATION
SIE Computing Solutions
SIE Computing Solutions
10 Mupac Drive
Brockton, MA 02301
USA
800.926.8722 Toll Free
508.588.6110 Telephone
508.588.0498 Fax
www.sie-cs.com
Standard 1/0 includes dual DVI display: one DVI-1
(DVI-D+VGA) and one OVI-D; GbE Ethernet Port, 8
x USB 2.0, 2 x RS-232, 2 x SATA 3Gb/s with RAID 0,
1 support; 1 x 6-pin header for KB/MS along with
Realtek ALC888 HD supported Audio
Enhanced congurability via a Mini PCie Expansion
Slot that can be congured by SIE for video capture,
DOM, wireless and many other functions
AVAILABILITY
Now
APPLICATION AREAS
Harsh transportation and industrial environments requiring
small form factors and where extreme temperatures, air
particulates, liquids and vibration prevent the use of stan-
dard commercial computers.
SIE 760 Small Form Factor Series
VME bus Variant: VME, VME64X, VXS, VPX, OpenVPX, cPCI
Designed to deliver mission-critical computing performance
in a fully portable enclosure -ideal for rugged small spaces.
Building on SIE Computing Solutions 40-year history of
design excellence in rugged electronic and embedded sys-
tems, the 760 Small Form Factor product line is designed
for mission-and performance-critical communications
and intelligence. SIE Small Form Factor compute platforms
allow data processing in the eld in a fully transportable,
highly rugged computing module that improves speed
and efciency by completing processing in the machine,
at the distributed level, before delivering data upstream.
SIE Computing Solutions Small Form Factor line provides
a complete distributed computing module -exceptionally
powerful and fully portable in everything from automo-
tive to railway. SIE Small Form Factor compute modules
enable the most modern technology to work in harsh con-
ditions at a level of distributed computing never before
possible. In addition to standard offerings, the SIE Small
Form Factor line can also be customized for a wide variety
of unique specications, providing high-end compute-
class performance for harsh industrial and transportation
environments where extreme temperatures, air particu-
lates, liquids and vibration prevent the use of standard
commercial computers.
FEATURES & BENEFITS
Extremely rugged
Easily customized
Dip-brazed construction
Modular power supply
Rated to operate in temperatures ranging from -40 to
+85 degrees Celsius
TECHNICAL SPECS
Two standard dimensions: 3.25 h x 6.5 w x 8.5 d
or 5.25 h x 6.5 w x 8.5 d
Available in an IP67 NEMA Rated Version and IP50
NEMA Rated Version
Quickly deployable with Intel Core i3/i5/ i7 multi.
core processors and up to 4GB RAM
E
n
c
l
o
s
u
r
e
s
E
n
c
l
o
s
u
r
e
s
engineers guide to TRANSPORTATION
34 EMBEDDED SYSTEMS ENGINEERING | HARDWARE January 2014
CONTACT INFORMATION
Axiomtek
TECHNICAL SPECS
3rd Generation Intel Core i7 up to 2.8 GHz or
Intel Core i3 1.6 GHz processor onboard
Intel QM77 PCH
High performance DDR3-1600 4 GB memory
onboard
Support USB 3.0 and SATA3
Two removable & lockable 2.5 SATA HDD and
one CFast
APPLICATION AREAS
Mobility Control Unit, Passenger Information
System, and Video Surveillance
AVAILABLE
Available now
tBOX321-870-FL - Fanless
Railway PC with 3rd Gen.
Intel Core i Processor
Compatible / Supported Operating Systems: Windows, Linux
The tBOX321-870-FL, powered by 3rd Generation
Intel Corei7 or i3 processor, is robust and unrivaled
in performance and reliability. Designed to support
complex needs of the transportation industry, this
compact box computer offers an IP40-rated and rugged
aluminum extrusion and steel case. It can operate in
severe environments with temperature ranging from
-40C to +70C (-104F to +158F). The tBOX321-870-FL
offers an onboard processor and DRAM as well as an M12
connector, which greatly reduce the impact of vibration
and shock. It is EN50155 / EN50121 certied for railway
applications and complies with EN45545-2 standards for
re prevention and safety. The systems power supply is
class S2 compliant and allows for wide range of power
input of 14VDC-32VDC, an important feature aiming to
prevent negative impacts from power interruption. Its
internal SIM slot and isolated COM and DIO as well as 3
PCI express slots offer exibility and scalability needed
to support various applications.
This application-ready system is perfect for mobility
control unit, passenger information system, video
surveillance and transportation-related applications.
Axiomtek is proud to offer an advanced, high-quality
product that is specically designed to serve unique needs.
We are also proud of our personalized service, design-
assist capabilities and highly-rated customer support. Call
us at 1-888-46-29466 for additional information.
FEATURES & BENEFITS
Fanless operation. Temperature range of
-40C ~ +70C
Isolated RS-232/422/485 and DIO
Three internal PCI Express Mini Card slot and
one SIM slot
Lockable I/O interface and M12 LAN, audio, power
and USB connector
Comply to re protection of railway vehicles
Europe standard PrCEN TS 45545-2
F
u
l
l
-
u
p

S
y
s
t
e
m
s



F
u
l
l
-
u
p

S
y
s
t
e
m
s
Axiomtek
18138 Rowland St.
City of Industry
CA 91748 USA
Tel: 626-581-3232
Toll Free: 1-888-46-29466
Fax: 626-581-3552
info@axiomtek.com
www.axiomtek.com
www.eecatalog.com/smart-energy EMBEDDED SYSTEMS ENGINEERING 35
engineers guide to SMART ENERGY
E
nergy harvesting is altering the
way engineers think about power
management and smart energy. Todays
harvesting trends suggest more institu-
tions are taking advantage of it. Despite
this, and the growing number of benefts
that energy harvesting presents, there are
challenges engineers face in integrating
harvesting platforms into the design
process, from both the manufacturer
and developer perspective. As both a
concept and practical application, energy
harvesting has existed for quite some
time. It is only now, however, that were
discovering its extended potential.
PRESENT USE CASES
We are already seeing unique and inter-
esting applications of energy harvesting
solutions across industries. Phillips,
for example, is working on a television
remote control powered by motion.
European universities are building
entire academic programs dedicated to
studying the use of nanomaterials for
energy, as well as the motion of bridges
to harvest energy. Even automotive
manufacturers have referred to the
efcient dynamics of newer cars, which
harvest energy from the drivers braking
motions. All are examples of how the
benefts of energy harvesting are encour-
aging institutions and industries to
reevaluate their existing practices.
OPERATING BENEFITS
Energy harvesting presents several
fnancial, environmental and design
benefts for engineers and users alike.
Te most inherent of these is the replace-
Energy Harvesting Trends
By Christian DeFeo, Newark element14
Despite the growing number of benef its that energy
harvesting presents, there are challenges engineers face in
integrating harvesting platforms into the design process.
Optimal energy harvesting solutions will most likely arise from utilizing multiple
sources within one solution or product. Engineers may also take a minimal approach:
applying the functionality of a system but curbing its power system to the lowest
level possible. This can be done by selecting the right low-energy chips, sensors
and microcontrollers, and matching them with the correct energy harvesting power
supply, such as the Piezoelectric harvester module pictured here.
ment of traditional batteries. Returning
to the example of television remotes,
the costs associated with creating, ship-
ping, purchasing and disposing of the
batteries found in these devices ofer
little return value when considering the
rate at which they are drained. Energy
harvesting dispenses with the need
for continuous power sources among
lower power devices. In addition, energy
harvesting ofers a safer alternative to
the various chemicals emitted into the
atmosphere by traditional battery packs.
From a sustainability perspective, energy
harvesting is one in a range of solutions
which help us live greener lives. We can,
for example, reduce our consumption of
batteries by harvesting energy. We can
also power devices in a cleaner and more
efcient way. It is important, however, to
bear in mind that as with many renew-
able sources of energysolar, wind,
etc. energy harvesting operates under
similar constraints. Tese power sources
are not continual; they have peak times
and times when they generate little to no
power at all. Engineers must apply this
logic across the board when using green
technologies, and energy harvesting can
substantially aid in the design process.
DESIGN CHALLENGES
Despite these benefts and more, energy
harvesting faces several roadblocks to mass
design integration. Energy harvesting is
also known as energy scavenging, and as
the term implies, it attempts to latch onto
energy scraps. It is therefore not ideal for
applications which will require a great deal
of continuous power.
For engineers, they must re-think their
understanding of energy: how do you take
36 EMBEDDED SYSTEMS ENGINEERING February 2014
engineers guide to SMART ENERGY
which to derive power, i.e., somewhere that
has thermal energy but no light or other
forms of energy, then the power is going to
determine the functionality you can have.
If, on the other hand, you have access to
multiple sources of energy, then perhaps
the functionality can determine what
power sources you tap into, and how much
redundancy you put into your solutions.
Manufacturers can also play a part in
easing the transition to energy harvesting
designs. It is important to present the
opportunity for engineers to get their
hands on harvesting platforms if they
wish to move beyond traditional power
solutions. Capacitive manufacturers and
battery manufacturers can also develop
and ofer batteries that already store
energy efciently, so that engineers are
free to focus on other aspects of the design
process. Again, this isnt an easy task. If
harvesting ofers a viable energy alterna-
tive, and early applications suggest that it
can, then it should be treated as one.
As the power requirements for applica-
tions continue to drop and, with the help of
engineers, harvesting gathers increasing
amounts of energy, we will all begin to see
more practical uses of energy harvesting
solutions arise.
Christian DeFeo is the e-supplier manager
at Newark element14, a global electronics
distributor and online community of 200,000
design engineers and tech enthusiasts. Re-
cently, he oversaw an energy harvesting
challenge at the element14 Community, in
which engineers around the world developed
power solutions for everyday devices.
should be used to determine which form of
energy harvesting is used, if not multiple
sources of energy harvesting at once.
However the power conditions may vary,
design engineers experimenting with
energy harvesting are still guessing
which conditions their solutions will be
used in, and those guesses wont always
be right.
EMERGING SOLUTIONS AND
TECHNOLOGIES
Solutions to energy harvesting design
faws will most likely arise from utilizing
multiple sources of energy harvesting in
one solution or product. Engineers may
also take the approach of minimization:
taking the functionality of a system and
curbing its power system to the lowest level
possible. Tis can be done by selecting the
right low-energy chips, sensors and micro-
controllers, and matching them with the
correct energy harvesting power supply
(such as the Piezoelectric and Peltier har-
vester modules). Tis isnt easyengineers
will have to be able to store and manage
energy when it is not available.
In the case of the aforementioned example,
it was necessary to use a Figaro TGS 5042
sensor for our engineers carbon monoxide
detector. Tis is an electrochemical sensor
which doesnt require power to operate.
In terms of microcontrollers, the Silicon
Labs EFM32 series have very low power
consumption and are adapted for practical
applications of this nature.
Te key determinant in choosing among
these various development approaches
is environment. If you are in a scenario
in which there are limited sources from
full advantage of it when it is present, how
do you store it, and what do you do when
it is not present? With a continuous power
source, these issues simply dont exist. For
all other power conditions, however, there
are pros and cons to various development
approaches engineers might take.
To use an example, in our recent Energy
Harvesting challenge, an engineer from
Poland decided to make a carbon mon-
oxide alarm that didnt require battery
or mains power. His frst approach was to
check how much energy he could derive
using the Peltier module in the Energy
Harvesting Solution to Go kit provided
to him. He quickly realized that the
energy wouldnt be sufcient to power a
conventional alarm.
Tis approach had the virtue of assessing
what his energy budget was, and then
building the application around it; how-
ever, it could be argued that he should
have looked at how he could create such an
alarm that used as little energy as possible
frst, then decided how to power it. In the
frst case, power sources determined the
functionality; but perhaps functionality
However the power
conditions may vary,
design engineers
experimenting with energy
harvesting are still guessing
which conditions their
solutions will be used in,
and those guesses wont
always be right.
These powerful microcontrollers provide a highly flexible and cost-effective solution to many
embedded control applications, including:
Electronic Locks
Keyless Entry Systems
Battery Management
LED Lighting Control
Motor Control
Digital Clocks/Watches
Zilogs Z8051 Product Family
And much more your design possibilities are endless!
For more information about our Z8051 Product Family, please visit www.zilog.com. Design With Freedom
DESIGN WITH FREEDOM
Advantages:
High-Performance, Low-Cost Architecture
Industry-Standard 8051-Compatible Core
Industry-Wide Popularity
Numerous Third-Party Tools Available
Zilogs Continuing Commitment to
Supporting Our Customers
Meet the members of Zilog's Z8051 Product Family:
Z51F0410HCX 4KB Flash, 256 bytes RAM, 10 pin SSOP, LF
8KB Flash, 512 bytes RAM, 16-pin TSSOP, LF Z51F0811RFX
LCD,32KB Flash, 1K bytes RAM, 32-pin SOP, LF Z51F3220SKX
LCD, 32KB Flash, 1.25K bytes RAM, 64-pin LQFP, LF Z51F3221ARX
64KB Flash, 3.25K bytes RAM, 64-pin LQFP, LF Z51F6412ARX
64KB Flash, 3.25K bytes RAM, 80-pin LQFP, LF Z51F6412ATX
38 EMBEDDED SYSTEMS ENGINEERING February 2014
engineers guide to SMART ENERGY
F
our broad trends are changing oper-
ating conditions on electric-power
distribution grids, and thus increasing
stress on distribution infrastructure:
1. Energy-use preferences have been
shifting toward electric power, resulting
in electricity-use growth rates which
are twice that of other energy sources.
2. Aging distribution equipment is now on
average older than its manufacturers
recommended operating lifetimes.
3. Increasing use of electronic loads
reduces load power factors and
decreases grid utilization efciency.
4. Distribution grids are no longer static
one-way power-delivery systems, but
are now dynamic two-way links that
also connect distributed generation
resources to loads.
To accommodate changing use models
and improve reliability, smart powerline
monitors are necessary for utilities to
track dynamic operating conditions on
distribution grids. Lets take a closer look.
CHALLENGES FOR THE GRID
Structurally, distribution grids have
changed little over the past century.
Tey developed to service comparatively
modest, linear loads over moderate
distances. Until a few decades ago, that
model was a realistic characterization of
distribution grids operating conditions.
For the last several decades, however,
electric power use has been changing.
According to International Energy Agency
(IEC) estimates, worldwide electricity
demand rose from 5.1PWh to 17.9PWh
(1015 Wh) between 1973 and 2010.
1
Although electric energy use more than
tripled over 37 years, it represents only
a 3.44% compound annual growth rate
Smart Monitoring Improves
Distribution-Grid Reliability
To accommodate changing use modelsincluding
growth in electric vehiclesand improve reliability,
smart powerline monitors are necessary for utilities
to track dynamic operating conditions on distribution grids.
By David Andeen, Maxim Integrated
Figure 1. A power factor less than 1.0
forces the utility to provide current in
excess of that warranted by the useful
power it delivers to a load. Data and
graph used with permission from JAS
Technical Media 2013.
(CAGR). It is also more than double the
CAGR of overall energy use, 1.69%, and of
global population, 1.54%.
2
During the same time, most monitoring
technology deployments happened at
generation and transmission facilities,
with monitoring on the distribution grid
limited to the head end at the substation.
Historical use models allowed utilities
to assume correctly that measurements
at substations refected operating condi-
tions throughout the distribution grid.
Tis assumption, however, is actually less
valid because actual grid use has become
more complex.
Upgrading the distribution infrastructure
is expensive. According to a study com-
missioned by the Edison Electric Institute
(EEI), the cost for newly constructed
overhead distribution lines ranges from
$86,700 to $1,000,000 (U.S. dollars) per
mile, depending on the locale and popula-
tion density.
3
Costs for newly constructed
underground distribution lines are more
than three times those for overhead wires.
Utilities are, therefore, eager to squeeze as
much use from existing distribution grids
as they can.
In addition to the three-fold increase of
electric power use in absolute terms, the
nature of power loads has changed over
the same period in ways that afect grid
capacity. Electric power generation and
use are measured and billed in energy
termsthe kWh. Utilities assess their
distribution capacity, however, in terms
of current.
Customers pay for real powerthe
instantaneous product of the voltage
and current waveforms. Nonresistive
loads present current waveforms that
are not strictly in phase with the voltage
waveform. In such cases, one can separate
the current waveform into the real or
in-phase component and the reactive or
Wide-area intrusion detector
Corridor, curtain & vertical
barrier motion detectors
Dual mode lighting/intrusion
detector
Secure access control
Stand-alone alarm systems
Intrusion Applications
Z8FS021
For more information or documentation about Zilogs ZMOTION products, please visit www.zilog.com/ZMOTION.
Lighting control
Access control
Customer sensing
HVAC control
Occupancy sensing
Vending applications
Automatic displays
Proximity
Power management
Occupancy Applications
Z8FS040
ZMOTION Development Kits
Design With Freedom
Zilog oers a wide selection of lens and pyroelectric
sensor bundled options to ft your application needs.
ZMOTIONL100ZCOG
ZMOTION Detection and Control Development Kit
ZMOTIONL200ZCOG
ZMOTION 20-pin Detection and Control Development Kit
ZMOTION Intrusion Detection Development Kit
ZMOTIONS200ZCOG
ZMOTION Intrusion Detection Block Diagram
ZMOTION MCU
Z8FS021

Jumper Confguration
Pet Immunity
Auto LED
Pulse Mode
Status
LED
White Light
Detection
Alarm Output
Form A
Form C
ZMOTION Intrusion Detection Components
Power Supply
ZMOTION MCU
Z8FS040BSB20EG
Application
Programming
Interface
Reserved for
PIR Engine
8 KB
4 KB
0 KB
User Application
Code Space
Interrupt Vectors
and Option Bits
ZMOTION Occupancy Detection Block Diagram
F
r
e
s
n
e
l
L
e
n
s
Pyro
Electric
Sensor
40 EMBEDDED SYSTEMS ENGINEERING February 2014
engineers guide to SMART ENERGY
quadrature-phase component. Te load
extracts useful work from the real com-
ponent of the current waveform, but the
utility must provide the total current.
Power factor is a measure of real power,
as a fraction of the sum of real and reac-
tive power. Even a power factor as high
as 0.9 accounts for up to 11% excess grid
utilization over and above that for which
the power provider can charge residential
Figure 2: Although the transportation sectors percentage use of electric power de-
creased on a worldwide basis between 1973 and 2010, in absolute terms the sectors
power usage more than doubled during the same period. Adoption of plug-in EV and
HEV passenger vehicles is expected to accelerate the growth of this sector during the
current decade. Source: Key World Energy Statistics 2012 OECD/IEA, 2012, p.35.
6
Table 1: Power Factors and Corresponding Excess Grid Utilizations for Common
Electronic Devices
4

Table 2: 6 World-Wide Electrical Energy Use by Sector
and most commercial customers (Figure 1). Although
electronics manufacturers have been improving their
products power-factor performance, a large amount of
legacy equipment is still in service with power factors as
poor as 0.55, corresponding to 82% excess grid utiliza-
tion (Table 1).
Much of the energy-use growth during the last several
decades has been due to the penetration of electronic (as
distinct from electric) devices, which present nonlinear
loads to the grid. Nonlinear loads generate current-wave-
form harmonics, which also degrade power factor and
drive up excess grid utilization. Various agencies and stan-
dards organizations set limits on the harmonic content of
current waveforms, typically counting the frst 40 to 50
harmonics corresponding to 2kHz to 3kHz measurement
bandwidths depending on the controlling norm and locale.
Among the various user sectors, transportation has historically represented a small
fraction of the total load on distribution grids (Figure 2).
5
In percentage terms, trans-
portation represents a smaller fraction of total global electric-energy use, but in
absolute terms, the sector has more than doubled (Table 2).
In the U.S. the transportation sectors electric power use is set to grow faster than the
historic organic rate due, in part, to a 2011 White House initiative with the goal of
one million cumulative electric passenger vehicles (EVs) by 2015.
7
Meanwhile, sales
of hybrid-electric vehicles (HEVs) have grown to almost 3% of the annual 12-million
vehicle U.S. market, and interest is growing in the plug-in versions of these vehicles.
EV and HEV adoption, however, has not homogeneously distributed across the entire
county. Rather, sales have tended to cluster in 24 metropolitan areas so their efect on
grid power demand will be greater in some geographies early in their adoption.
8
One
motivator for vehicle owners to switch to EVs or plug-in HEVs is the cost disparity
between regular gasoline and the so-called eGallonthe cost of the electric-energy
equivalent to a gallon of regular gasoline: Te U.S. average price for a gallon of regular
gasoline in August 2013 was $3.56 compared to $1.22 for an eGallon.
9

Finally, distributed generation and especially small-to medium-scale renewables
are changing the distribution grid from a static, one-
way power-delivery structure to a more complex and
dynamic two-way system. In particular, customer-based
photovoltaic and small-scale wind generation pushes
power back onto the distribution grid when their
power generation exceeds the customers immediate
use and, if present, local storage capacity. Moderate-
sized customer-owned photovoltaic sites, such as those
appearing on the rooftops of ofce buildings and parking
structures, can generate over 500kW and supply more
than 250MWh annually. During low use periods, such
as weekends, these facilities can push excess energy back
onto the distribution grid.
With the distribution grids historic operating
model, utilities have struggled to detect and respond
to a variety of grid conditions, such as voltages at the
grid edge from distributed generators.
www.eecatalog.com/smart-energy EMBEDDED SYSTEMS ENGINEERING 41
engineers guide to SMART ENERGY
Figure 3: Secondary-transformer monitoring is on track for rapid
growth, exceeding generator-power- and distribution-substation-
transformer monitoring by 2015. Data and chart used with permission
from GTM Research.
Figure 4: Analog and mixed-signal ICs simplify the power-monitor
design task. As the shaded regions indicate in this diagram of
potential and current ( PT/CT) transformers, most of the necessary
functions are available from Maim Integrated
.13

THE HIGH COST OF FAILURE
Te annual economic consequences of electric power reliability events (i.e., power
failures) to U.S. power utility customers is about $79 billion according to the Lawrence
Berkeley National Laboratory base-case estimate.
10
Of this amount, about two-thirds
is attributable to momentary service interruptionsthose lasting less than fve min-
utes. Te duration for the remainder can extend from minutes to days. Loss fgures
do not include investments in power-failure mitigation equipment such as customer-
owned backup generation, batteries or power-conditioning equipment to moderate
power-quality events.
In addition to their own fnancial motivations, electric power utilities are under pres-
sure from customers, industry organizations and regulatory agencies to minimize
reliability events. Powerline monitors throughout the distribution grid can operate
in concert with automated switchgear to quickly identify anomalous operating condi-
tions, route around afected areas and expedite problem resolution.
11
Beyond asset management, monitoring valuable infrastructure components such
as branch reclosers and secondary transformers is integral to fast-acting protection
methods. Monitoring can also provide valuable data from the distribution grids edge.
Deployment of powerline monitoring at the secondary transformer level is in its early
stages, but is projected to exceed the traditional power-transformer market by 2015
(Figure 3).
12
Tis development is possible, in part, due to the availability of analog and
mixed-signal IC components that greatly simplify the task.
SMART MONITORING
Powerline monitors located in the distribution grid are topologically similar to those
at the substation and elsewhere in the electric power delivery system. Voltage trans-
formers provide scaled representations of the voltage on each of the three power phases
and on the neutral. Similarly, current transformers provide a voltage representation of
the current passing through each of the three power phases and neutral. Te moni-
tors analog front-end (AFE) electronics can bufer the eight resulting signals and flter
them to ensure that out-of-band (OOB) energy does not alias down to the baseband
during the digitization process (Figure 4).
In common wye-connected distribution
systems, the utility drives the three
phases with 120 ofset between pairs;
voltages are measured with reference to a
fourth neutral lead. Under balanced load
conditions, 100% of the current fows
through the phase connections. Current
fowing through the neutral signifes
an imbalance. Such an imbalance could
indicate, for example, an emerging defect
in a secondary transformers insulation
system, thereby providing the utility with
advanced warning and allowing them to
replace the transformer on a schedule.
Such edge information-gathering saves
both the utility the cost of an emergency
response and saves the customer the cost
and inconvenience of an unanticipated
feld failure.
Calculating the power over one line cycle
requires accurate and simultaneous mea-
surement of both the voltage and current
signals for each phase and the neutral. For
each lead, the monitor must compute:
Where v) is the instantaneous voltage
at cycle phase , and i( is the instanta-
neous current. Te monitor can compute
reactive power by multiplying the RMS
42 EMBEDDED SYSTEMS ENGINEERING February 2014
engineers guide to SMART ENERGY
values of voltage and current and sub-
tracting the real component.
Te European Unions IEC 62053 stan-
dard for Class 0.2 equipment typifes
requirements for power monitors. It calls
for measurement error 0.2% of the nom-
inal voltage and current. Power-factor
measurement requires phase matching
voltage and current samples to 0.1%.
Such measurement specifcations
require that the eight digitizers required
for a three-phase line closely match
one another and that their sampling
times are tightly controlled. Analog and
mixed-signal IC makers such as Maxim
Integrated provide 4-channel analog-
to-digital converters (ADCs) well suited
to these measurements. Te ADCs dif-
ferential inputs and control features
allow groupings of up to 32 channels
of simultaneous sampling. Integrated
8-channel ADCs are also available for
monitoring applications that can use
single-ended inputs.
Data from a lines eight voltage and cur-
rent samples can feed a microcontroller
or digital signal processor (DSP) to
provide accurate power calculations and
assessment of power factor. Systems
can use the power factor data to con-
trol local capacitor banks and thereby
improve overall grid utilization. Protec-
tion devices can use the power data for
fast-acting automated breakers. Such
systems can not only use the data to
quickly open a breaker in the event of a sufciently large line anomaly, but can
also use the same data stream to close the breaker, minimizing the duration of the
downstream power interruption.
REFERENCES:
1. Key World Energy Statistics 2012 OECD/IEA, 2012, http://www.iea.org/pub-
lications/freepublications/publication/kwes.pdf, restated in PWh units by JAS
Technical Media.
2. Population Data1960 to 2012, World Bank, http://data.worldbank.org/indicator/
SP.POP.TOTL.
3. Hall, Kenneth L., Out of Sight, Out of Mind 2012, An Updated Study on the Under-
grounding Of Overhead Power Lines, Edison Electric Institute, January 2013.
4. Data for Table 1 were generated from direct measurements. Data source is JAS Tech-
nical Media 2013.
5. Key World Energy Statistics, 2012 OECD/IEA, 2012, p. 35.
6. Data from Key World Energy Statistics 2012 OECD/IEA, 2012, p. 35, restated in
PWh units by JAS Technical Media.
7. One Million Electric Vehicles By 2015: February 2011 Status Report, U.S. DOE,
2011, http://www1.eere.energy.gov/vehiclesandfuels/pdfs/1_million_electric_
vehicles_rpt.pdf .
8. Charging Ahead: Te Last MileIs the U.S. electric infrastructure ready to sup-
port one million electric vehicles? Deloitte, 2012. http://www.deloitte.com/assets/
dcom-unitedstates/local%20assets/documents/energy_us_er/us_er_charginga-
head_exctvsummary_may2012.pdf.
9. eGallon: compare the costs of driving with electricity, U.S. DOE, 2013. http://energy.
gov/maps/egallon . See also Leistikow, Dan, Te eGallon: How Much Cheaper Is It to
Drive on Electricity? U.S. DOE, June 2013, http://energy.gov/articles/egallon-how-
much-cheaper-it-drive-electricity .
10.LaCommare, Kristina Hamachi and Eto, Joseph H., Understanding the Cost of Power
Interruptions to U.S. Electricity Consumers, Ernest Orlando Lawrence Berkeley
National Laboratory, Sept 2004. Prepared for the Energy Storage Program, Ofce
of Electric Transmission and Distribution, U.S. DOE and Ofce of Planning, Budget,
and Analysis, Assistant Secretary for Energy Efciency and Renewable Energy, U.S.
DOE, http://emp.lbl.gov/sites/all/fles/REPORT%20lbnl%20-%2055718.pdf
11.Smart-Grid Technologies Can Reduce Power Outages, but Legislative Action Is
Needed, National Electrical Manufacturers Association, July 2012, http://www.
nema.org/News/Pages/Smart-Grid-Technologies-Can-Reduce-Power-Outages,-
but-Legislative-Action-Is-Needed.aspx .
12.See Kellison, Ben, Transformer Monitoring Markets, 2013-2020: Technolo-
gies, Forecasts, and Leading Venders, greentechgrid, April 2013, http://www.
greentechmedia.com/articles/read/gtm-research-qa-transformer-monitoring-
markets-part-i.
13.For more information about the parts that Maxim ofers for a PT/CT module, go to
http://www.maximintegrated.com/solutions/distribution-automation/pt-ct-module/.
David Andeen is the reference design manager at Maxim Integrated. He joined Maxim
in 2005 in the sales department and assumed responsibility for the energy segment from
2011 through 2013. He holds a Ph.D. in materials science from the University of Califor-
nia, Santa Barbara.

In percentage terms,
transportation represents
a smaller fraction of total
global electric-energy
use, but in absolute
terms, the sector has
more than doubled.
www.eecatalog.com/smart-energy EMBEDDED SYSTEMS ENGINEERING 43
engineers guide to SMART ENERGY
A
ccording to a recent Annual Energy
Outlook, worldwide energy con-
sumption will increase 50 percent by
2035, and electricity alone will increase
by 30 percent during the same time
1
.
Global demand for electrical power has
outstripped supply and theres no end
to the situation in sight. Unfortunately,
only generating more power is not a
viable solution. A more feasible way for
both the short and long term is to be
more efcient with the electrical power
that is already being generated and
distributed over the grid.
A step in this direction would be to make
the grid itself more intelligent so that
power utilities, governmental regula-
tors, power distribution companies
Data Concentrators Are Key to
Engineering a Smarter Grid
To design cost-eff icient and future-proof concentrators,
developers need to carefully consider WAN and NAN
options, hardware platform scalability, software
availability and networking/data security design.
By James Hao, Texas Instruments ( TI )
and consumers could better monitor,
analyze and control energy generation,
distribution and usage. Along with
smart meters deployed worldwide in the
last ten years, data concentrators play
a key role in enabling intelligent power
consumption with more robust end-to-
end communications.
CHALLENGES FACING THE
SMART GRID
Data concentrators serve as the interface
between the utility-controlled smart
grid distribution network and end users,
managing the data exchange between
the utility and multiple smart meters in
a particular geographical area. In both
advanced metering infrastructure (AMI)
and automated meter reading (AMR)
systems, data concentratorsalso
called data aggregatorsprovide the
core functionality required to measure,
analyze and collect energy usage. Tey
then communicate that data to a central
database for billing, troubleshooting and
analyzing.
Before we jump into the details about data
concentrators, lets take a look at the cur-
rent grid challenges that concentrators
need to address:
First, a variety of communica-
tion standards and protocols exist
between meters and utility servers.
On one side, smart meters could
be confgured with a neighbor-area
network (NAN) communications, fea-
turing narrow bandwidth and lower
power consumption, based on regional
or country-wide policy, such as
RS485, narrow band power line com-
munication (PLC), broad band PLC,
low power RF, etc. On the other side,
utilities may have an existing wide-
area network (WAN) communication,
featuring higher bandwidth and
higher data speed, to collect data such
as GSM/GPRS (migrating to 3G/4G
network), Ethernet, optical cable, even
proprietary radio. Te concentrator
should have enough communication
processing capability and fexible /
confgurable interfaces to deal with
those protocols.
Cyber security and privacy protection
is a major concern. With the adoption
of cloud-based smart grid solutions,
increasing cyber threats are forcing
stronger security measures on all levels
of smart grid equipment. Research
suggests
2
the global smart grid cyber
security market will grow at a CAGR
of almost 30 percent over the period
2012-2016. Also, information from
private residential dwellings needs
to be protected, and not accessible by
non-authorized parties. Specifcally,
utilities are requiring more and more
security features on data concentra-
tors, including device security, content
encryption and anti-hacking.
Real-time monitoring is needed to
diagnose the status of a regional
grid. Along with modern grid network
migration, utilities need to access the
status of the grid network, not only the
residential low-voltage power grid, but
also renewable and distributed energy
networks, such as from solar inverters,
solar panels, industrial lighting
networks, etc. Metrology and power
analytics will be required on data
concentrators to monitor power-line
performance and efciency, so utilities
can take immediate actions to reduce
outage or fx local power line issues.
Finally, support is needed for a
number of applications, software
and upgrades. To enable advanced
applications such as demand response,
metering data management, billing
information statistics, inventory man-
agement, web browsing, networking
protocol conversion, etc., utilities
Data concentrators serve
as the interface between
the utility-controlled smart
grid distribution network
and end users, managing
the data exchange between
the utility and multiple smart
meters in a particular
geographical area.
44 EMBEDDED SYSTEMS ENGINEERING February 2014
engineers guide to SMART ENERGY
must have advanced operating sys-
tems and powerful processors on the
data concentrator.
MAIN FUNCTIONS OF A DATA
CONCENTRATOR
Data concentrators push intelligence to
the edge of the grid by integrating, orga-
nizing and aggregating information from
e-meters or other end equipment on the
grid. Typically located at the transformer
or a secondary substation level, data
concentrators need to have the following
basic functions (Figure 1):
Provide reliable communication with
meters and head ends
Secure consumers data and
information
Monitor regional grid status
Support various data management
applications.
TECHNOLOGIES TO CONSIDER
WHEN DESIGNING DATA CON-
CENTRATORS
Typically, data concentrator systems use
sophisticated designs based on micro-
controllers (MCU) or microprocessors
(MPU) and rely on multiple wireless or
wired communication in the last mile.
Tere are many considerations when
starting to develop a concentrator
system, including how system fexibility
will comply with regional or global com-
munication regulations, how system
scalability will support from 10s of
service node to more than a thousand
service nodes with a reasonable cost
structure, key security features, and how to support advanced applications.
A superset of a smart data concentrator system is shown in Figure 2.
NAN COMMUNICATION OPTIONS
Power line communication (PLC) has been used for many decades and
gained worldwide interest with its ability to modulate communication
signals over existing power lines and enabling devices to be networked
without introducing any new wires or cables. Tis capability is extremely
attractive across a diverse range of applications, including utility metering,
home area networks, lighting and solar, which can leverage greater intel-
ligence and efciency through networking.
A variety of new services and applications now require greater reliability and
data rates than PLC techniques from the past. Several factors impact PLC
performance, including impulsive and narrowband noise, time-varying line
impedance and frequency-selective channels. Table 1 and Figure 3 present
three-phase PLC data concentrator PHY test criteria and performance
results with special care to cope with those factors.
PRIME, G3 and IEEE P1901.2 are the three PLC standards most discussed in the market
recently, all of them based on orthogonal frequency division multiplexing (OFDM) modu-
lation and channel coding techniques to efciently utilize the CENELEC band (regulated
in Europe) to achieve high resiliency to interference and attenuation, and data speeds up
to 40kbps. If using the full FCC band (3kHz-490kHz), a higher data rate (40Kbps-1Mbps)
can be reached. On the PHY layer, robust modes are defned and enable communication
across the medium voltage (MV) to low voltage (LV) transformers. As a result, the latest
PLC can achieve reliable communications up to 10 km away while crossing between
medium voltage transformers. Te standards also enable communications over the low
voltage and medium voltage (LV/MV) transformer crossing for a total distance of up to
4-5 km, depending on the channel condition.
3 4 5
Figure 2: A diagram of a typical data concentrator system, based on TIs Smart Data
Concentrator reference design.
Figure 1: The main functions required of modern data concentrators
www.eecatalog.com/smart-energy EMBEDDED SYSTEMS ENGINEERING 45
engineers guide to SMART ENERGY
On the MAC layer, PRIME, G3 and IEEE
P1901.2 support IPv4/IPv6 networks
in an efcient manner so no additional
router is needed to run in IP network.
To achieve the best bill of materials (BOM),
a designer needs to consider and integrated
analog front end (AFE) to support the
full FCC band and a programmable PLC
modem to support multiple PLC standards
through a software upgrade method. At
the network level, a developer also must
consider the number of nodes connected
to the concentrator, the number of levels
from the leaf node to the root node,
the reliability of the switch node, locations
and length of the low voltage lines in order
to run a reliable automated meter reading
and control application.
Aside from PLC, low power RF technology
is also widely used at certain regions,
as well as RS485 communication used
to support legacy meters deployed in
those markets. Tose require MCUs or
MPUs with enough serial interfaces (for
example, up to 8 UARTs).
CONSIDERING WAN
COMMUNICATION
10/100/1000M Ethernet and optical cable
have been widely used in grid infrastruc-
ture as WAN options, but those may be
not accessible everywhere, nor the best
options from a CAPEX/OPEX perspective.
Wireless access technology is another
choice. Currently, GSM/GPRS tech-
nology has been adopted (up to 52kbps
throughput); future alternatives are
WCDMA/CDMA2000 (up to 2Mbps) and
LTE (up to 1Gbps). Te appropriate choice
for WAN technology will likely be made
on the following criteria: availability,
price, throughput, latency and indoor cov-
erage, with a mix of diferent technologies
possible in the future.
SYSTEM SCALABILITY
Te scalability of a data concentrators
hardware platform and software capa-
bility is important, and it can save a lot
of engineering cost and time to market.
Depending on specifc utility require-
ments and deployment scenarios, one
data concentrator could be connected to
less than 100 service nodes (meters), or
up to 1000 service nodes. Te operating
Table 1: Criteria and results from a three-phase PLC data concentrator PHY test
system is also required to enable easy
maintenance and upgrading with new
applications and networking stacks. For
example, with more than a decade of
development, Linux has general accep-
tance as the open source, royalty-free
operating system with lots of rich fea-
tures, also a real-timing patch could be
added on if needed. If Linux is needed,
some low-end MCUs, not having enough
internal memory space and external
fash memory support, will be out of
consideration. Most engineers are
should seriously consider a pin-to-pin
compatible MCU/MPU platform with
core frequency scaled from 300Mhz to
1GHz, enabling a longer life cycle (>5
years) for the concentrator in the feld.
Beyond the hardware considerations,
developers need to consider the software
needs for their system. In addition to
full PLC software stacks, developers can
use a complete implementation of the
IEC 62056 DLMS/COSEM protocol stack
(including server and client stacks), which
allows AMI/AMR vendors to jumpstart
development of data concentrators and
metering head end nodes, not to mention
accelerating time-to-market. Another
TEST TEST CRITERIA TEST RESULT SUMMARY PASS/NO PASS
46 EMBEDDED SYSTEMS ENGINEERING February 2014
engineers guide to SMART ENERGY
example would be metrology software,
which is used to monitor voltage, current,
frequency, active power, reactive power,
and harmonics over the power line. Most
semiconductor chip vendors can provide
MCU-optimized metrology libraries.
CYBER SECURITY AND DATA
PROTECTION
Tere are a couple diferent levels of
security, each based on certain network
deployment and overall security strate-
gies that diferent utilities may require.
Data concentrators push
intelligence to the edge
of the grid by integrating,
organizing and aggregating
information from e-meters
or other end equipment
on the grid.
Network security
Tis will be managed by the communication protocol itself, for example, IPSec, SRTP,
ciphering (AES, DES, SHA-1/-2), etc.
Device security
Includes secure boot and runtime security.
Secure boot protects software stored in the boot image and protects device from
executing unauthorized software; multiple public keys and customer keys will
be involved during the boot sequence.
Runtime security controls the management of emulation, debug, trace and test
capabilities within the system. Memory pages, registers and peripherals will be
confgured with access levels, such as user or supervisor mode; read, write or
execute mode, etc.
Secure storage
Tis will protect the data in non-volatile peripherals or of-chip memory (vender
software/IP, or user private data).
Also provides re-authoring support (re-encryption with device specifc key).
CONCLUSION
Data concentrators play an important role in a modern AMR/AMI system. To design
cost-efcient and future-proof concentrators, developers need to carefully consider
WAN and NAN options, hardware platform scalability, software availability, and net-
working/data security design.
REFERENCES:
1 U.S. Energy Information Administration: Annual Energy Outlook 2011
2 Global Smart Grid Cyber Security Market 2012-2016: Worldwide Industry Share,
Investment Trends, Growth, Size, Strategy And Forecast Research Report 2016 -
BWWGeeksWorld by www.broadwayworld.com
3 M. Nassar, J. Lin, Y. Mortazavi, A. Dabak, I. H. Kim, and B. L. Evans, Local utility
powerline communications in the 3-500kHz band: channel impairments, noise,
and standards, IEEE Signal Proc. Mag., to appear
4 PRIME Alliance Technical Working Group, PRIME Specifcation, version 1.3.6,
Nov 2011, available: http://www.prime-alliance.org (May 2012).
5 G3-PLC Alliance, available: www.g3-plc.com
James Hao is marketing manager for TIs Smart Grid Infrastructure solutions. He is re-
sponsible for worldwide grid infrastructure business development. He has more than 12
years of experience in industrial, wireless communication and networking applications.
He earned a BSEE and MSEE from the University of Electronic and Science Technology
of China (UESTC).
www.eecatalog.com/smart-energy EMBEDDED SYSTEMS ENGINEERING 47
engineers guide to SMART ENERGY
CONTACT INFORMATION
www.embeddedsystemsengineering.com EMBEDDED SYSTEMS ENGINEERING 47 www.eecatalog.com/smart-energy Boards and Modules | EMBEDDED SYSTEMS ENGINEERING 47
I
n
d
u
s
t
r
i
a
l
I
n
d
u
s
t
r
i
a
l

TECHNICAL SPECS
DDR3-800/1066 SO-DIMM supports up to 4 GB memory
Isolated COM, LAN, CANBus and DIO ports
One 2.5 SATA HDD and one CFast socket
APPLICATION AREAS
Electric power substation, Condition monitoring, Trans-
portation, Factory automation, and more.
AVAILABILITY
Available now
IPC122-833-FL - 1U Rackmount Fan-
less Embedded Computer
Axiomteks new application-oriented industrial computer
system, the IPC122-833-FL, is IEC 61850-3/IEEE 1613 certi-
ed and designed specically for electric power substation
automation use. This advanced 1U rackmount industrial-
grade computer system supports 130~370 VDC and 85~264
VAC wide range power input, with ESD protection of 15KV,
to ensure smooth and reliable operation in a mission-
critical or unconstrained thermal environment. Axiomteks
new IPC122-833-FL hardened system is rugged, fanless
and can operate under a wide operating temperature range
of -10C to +60C (13F to +140F). Built with exibility of use
and scalability in mind, the system offers isolated CANBus,
multiple isolated LAN ports, isolated COM ports and iso-
lated DIO ports. The IPC122-833-FL has dual core Intel
Atom processor N2800 and is designed to meet high
performance and reliability standards required by various
operations including electric power substation, condition
monitoring, transportation, factory automation and more.
This rugged computer has heavy-duty steel housing
and 19 rack mounting. With the height of 1U and depth
of 300mm, it is perfect for use in a wide variety of harsh
and space-limited environments. Axiomtek is proud to
offer an advanced, high-quality product that is specically
designed to serve unique needs. We are also proud of our
personalized service, design-assist capabilities and highly-
rated customer support. Let us take the headache away.
Call us at 1-888-46-29466.
FEATURES & BENEFITS
Intel Atom processor N2800 1.86 GHz
Wide operating temperature range of -10C to +60C
(13F to +140F)
130~370 VDC and 85~264 VAC wide range power input
Highly efcient heat conduction with fanless design
IEC 61850-3 and IEEE 1613 certied for substation
automation
Axiomtek
18138 Rowland St.
City of Industry
CA 91748 USA
Tel: 626-581-3232
Toll Free: 1-888-46-29466
Fax: 626-581-3552
info@axiomtek.com
www.axiomtek.com
Axiomtek
48 EMBEDDED SYSTEMS ENGINEERING February 2014
engineers guide to SMART ENERGY
CONTACT INFORMATION
48 EMBEDDED SYSTEMS ENGINEERING | Boards and Modules February 2014
N
e
t
w
o
r
k
/
C
o
m
m
u
n
i
c
a
t
i
o
n
N
e
t
w
o
r
k
/
C
o
m
m
u
n
i
c
a
t
i
o
n

Mini-Z Solid State Relay Design Board is a complete
and easy-to-use development platform for Zilogs series
of Mini-Z stamp modules, which includes the ZNEO,
WLAN, and Z-PAN 28-pin modules

APPLICATION AREAS
Consumer electronics, industrial, communications/
networking, medical, military/aerospace, security, wire-
less/mobile.
AVAILABILITY
Available for purchase from the Zilog Store at
www.zilog.com/Store.
Zilogs World of Reference Designs
Zilogs World of Reference Designs allow you to accelerate
your next design with a head start. Zilog has combined
the technical innovation of our product portfolio with
optimized designs, an extensive pool of software, and the
tools and resources needed to quickly get your product to
market. Our reference design solutions ship complete with
hardware and software, and all of the documentation you
need is available free for download, which helps expand
the design potential for all engineers, including engi-
neering students. Our reference designs give you access to
a wealth of new potential.
Zilog has many technologically innovative reference
designs that include boards, modules, and even edu-
cational platforms. The Zilog Educational Platform is
designed to offer a comprehensive educational advantage
to students who are pursuing a degree in the electronics
and computer sciences. It is an electronics development
system for learning and teaching at the university level.
One of Zilogs most recent motion detection reference
designs is the ZMOTION AC Load Controller Design
Module, which demonstrates how to use Zilogs ZMOTION
MCU in a passive infrared-based motion detector to control
power to an AC load in applications such as lighting and
HVAC systems. Our new Microstepper Motor reference
design offers a complete and easy to use platform, and
drives a unipolar stepper motor using the Z8F1680 MCUs
onboard analog comparators.
Zilog has a considerable selection of reference designs,
helping to expand the potential for all.
FEATURES & BENEFITS
Mini-Z USB Design Board provides a reference design
to incorporate USB host and peripheral functionality
with Zilogs portfolio of Mini-Z modules; the design also
incorporates a Secure Digital (SD) card
World of Sensors Design Board is an easy-to-use
platform, and includes a world of sensing technology
with which you can easily experiment, including seven
different sensors, each on different peripherals
ZMOTION AC Load Controller Design Module uses the
8-pin Z8FS040 MCU to intelligently control a mechanical
relay, and provides user adjustments for motion sensitiv-
ity, delay time, and ambient light level
Microstepper Motor Design Board drives a unipolar
stepper motor using the Z8F1680 MCUs onboard analog
comparators for one-shot feedback current limiting, and
is optimized for microstepper motor control
Zilog, Inc.
1590 Buckeye Drive
Milpitas, CA 95035 USA
P: 408-457-9000
TF: 866-469-4564
F: 408-416-0223
marketing@zilog.com
www.zilog.com
Zilog, Inc.
EXPOSITION: April 1516, 2014
Charlotte Convention Center | Charlotte, NC
Please Visit:
AeroConShows.com
I found the show to be quite benecial. Some of the
new technology presented was exactly what I was
looking for. The opportunity as a contract supplier
to interface with some of our current and future
customers was the icing on the cake. Great event.
Bob Dooly, ESAM Inc.
Set Your Flight Plan for Success!
The Premier Event for Aerospace and Defense Industry Manufacturing
Showcased at Aerocon:
Over 50 of the top suppliers focusing on
the hottest topics in assembly, electronics,
CAD/CAM software & more!
Learning opportunities at the Aerocon
Seminars and Free Tech Theater Sessions
Access to the $324+ Billion Aerospace
industry like never before
Follow us on Twitter:
@AeroConShows
Design With Freedom
For more information, please visit www.zilog.com.
Go With The Best In Motor Control!
Zilog Motor Control Solutions
BLD Universal
and
Brushed DC Motor Control
Z8 Encore! F083A Series (28-Pin)
3-Phase/Single-Phase
AC Induction and
PMSM Motor Control
Permanent Magnet Synchronous Motors
Z16FMC Series Motor Control
Stepper
Motor
Control
Z8 Encore! XP F1680 Series (28-Pin)
Z8FMC16100 Series Motor Control
BLDC Sensor
and
Sensorless Motor Control

You might also like