Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 62 views

    EuroSMCLET 400 RDC

    Uploaded by

    florin071
    The document describes the LET-400-RDC primary injection set. It has four current output ranges from 0-10A to 0-400A that can be used to test primary current relays, transformers, and perform primary injection tests on protection systems. The device has a built-in digital ammeter and timer to measure current values and operation times during testing. It also provides AC and DC voltage outputs and has protections like thermal and short-circuit relays.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    EuroSMCLET 400 RDC

    Uploaded by

    florin071
    62 views2 pages
    The document describes the LET-400-RDC primary injection set. It has four current output ranges from 0-10A to 0-400A that can be used to test primary current relays, transformers, and perform primary injection tests on protection systems. The device has a built-in digital ammeter and timer to measure current values and operation times during testing. It also provides AC and DC voltage outputs and has protections like thermal and short-circuit relays.

    Original Title

    EuroSMCLET-400-RDC[1]

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes the LET-400-RDC primary injection set. It has four current output ranges from 0-10A to 0-400A that can be used to test primary current relays, transformers, and perform primary injection tests on protection systems. The device has a built-in digital ammeter and timer to measure current values and operation times during testing. It also provides AC and DC voltage outputs and has protections like thermal and short-circuit relays.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    62 views2 pages

    EuroSMCLET 400 RDC

    Uploaded by

    florin071
    The document describes the LET-400-RDC primary injection set. It has four current output ranges from 0-10A to 0-400A that can be used to test primary current relays, transformers, and perform primary injection tests on protection systems. The device has a built-in digital ammeter and timer to measure current values and operation times during testing. It also provides AC and DC voltage outputs and has protections like thermal and short-circuit relays.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Primary Injection Set

    LET-400-RDC
    LET-400-RDC ingles 16/6/03 16:17 Pgina 1
    P
    l
    e
    a
    s
    e

    N
    o
    t
    e
    :

    D
    u
    e

    t
    o

    t
    h
    e

    c
    o
    n
    t
    i
    n
    u
    o
    u
    s

    r
    e
    s
    e
    a
    r
    c
    h

    a
    n
    d

    d
    e
    v
    e
    l
    o
    p
    m
    e
    n
    t

    b
    y

    E
    U
    R
    O
    S
    M
    C
    ,

    s
    p
    e
    c
    i
    f
    i
    c
    a
    t
    i
    o
    n
    s

    i
    n

    t
    h
    i
    s

    c
    a
    t
    a
    l
    o
    g

    m
    a
    y

    b
    e

    c
    h
    a
    n
    g
    e
    d

    w
    i
    t
    h
    o
    u
    t

    p
    r
    e
    v
    i
    o
    u
    s

    n
    o
    t
    i
    c
    e
    .
    LET-400-RDC
    MAIN FEATURES
    Permanent current up to 400A 1 kVA in 4 ranges.
    Built in digital ammeter 0.5% accuracy.
    Built in digital timer resolution 1 ms.
    Thermal and shortcircuit protection.
    Variable AC and DC voltage up to 220V.
    Variable auxiliary DC power supply up to 220V.
    APPLICATIONS
    Test of the I/T curve in primary current relays test.
    Primary injection tests.
    Test of measurement and protection transformers.
    In general, primary injection tests including the
    complete loop, such as current transformer ca-
    bles, protective relays, and circuit breakers.
    DESCRIPTION
    The LET-400-RDC is designed to perform most of the primary tests that
    are necessary in substations commissioning. It allows to perform with
    sufficient power, all the primary current injections to test the proper
    function and wiring of all the elements that compose the protection and
    measuring section in a substation.
    The regulation system is based on a continuously variable autotrans-
    former (Variac) that supplies to a power transformer that delivers the
    high current outputs and isolate the main supply from the load. A built-
    in ammeter and a timer gives the information about the current value
    and the operation time of the relay or breaker under test.
    FEATURES
    Power outputs
    There are four different current outputs:
    0 - 10A 0 - 100V
    0 - 50A 0 - 20V
    0 - 200A 0 - 5V
    0 - 400A 0 - 2.5V
    Timer
    In the control and regulation unit there is a timer installed that can work
    with dry signals or with voltage signals the timer can measure in CY-
    CLES as well it is an autorange, 5-digit digital timer with the following
    measuring ranges:
    00.001- 99.999 s
    99.999 - 999.99 s
    999.99 - 9999.9 s
    9999.9 - 99999 s
    Ammeter/Voltmeter
    Installed in the control and regulation unit it is a digital instrument of
    4 digits. The accuracy is 0.5% of the reading 1 digit.
    Protections
    The equipment is protected by thermal and shortcircuit magnetic relays.
    The outputs are also thermal protected to avoid excess in the duty cy-
    cle. Once this protection trips the connection of the output is not possi-
    ble until the thermal element detects that the temperature drops to an
    acceptable and safe level.
    STANDARD ACCESORIES
    2 test leads of 95 mm
    2
    section, 2 meters length.
    2 timer connection leads, 2 meters length.
    2 crocrodile clips.
    Spare fuses.
    Instruction manual.
    1 nylon protection bag.
    TECHNICAL SPECIFICATION
    EUROSMC, S.A.
    Polgono Industrial P-29, Calle Buril, 69. 28400 Collado-Villalba. Madrid (Spain). Tels: 34 - 91 - 849 89 80*. Fax: 34 - 91 - 851 25 53
    www.eurosmc.com e-mail: sales@eurosmc.com
    VOLTAGE OUTPUTS
    Voltage Outputs: VOLTAGE CURRENT
    0-220V AC: 220V 4 A
    0-220V DC: 220V 4 A
    Auxiliary DC Voltage Supply:
    0-50V DC: 0-50V 1 A
    0-110V DC: 50V-110V 0.5 A
    0-220V DC: 110V-220V 0.25 A
    DUTY CYCLE
    Max. Max. Max. Max. Max. Max. Open
    Continuous Current Current Current Current Current Circuit
    Current 60 min 15 min 3 min 1 min 1 s Voltage
    400 A 600 A 800 A 1,100 A 1,400 A 2.5 kA 3.45V
    200 A 350 A 400 A 550 A 700 A 1.5 kA 6.90V
    50 A 175 A 100 A 138 A 175 A 325 A 27.5V
    10 A 25 A 20 A 27.5 A 35 A 65 A 138V
    Cooling Time* 15 min. 20 min. 20 min. 30 min
    *Guaranteed values at ambient temperature < 25C
    GENERAL
    Control: Manual
    Voltage supply: 230 V 10%, 50-60 Hz
    Operation Temperature: 0 - 55 C
    Case: Robust enamalled steel
    Weight: 25 kg
    Dimensions: Height: 460 mm / 18 Width: 370 mm / 15 Depth: 250 mm / 10
    Other similar equipment
    LET-400-RD Has exactly the same characteristics as the LET-400-RDC but does not have an
    auxiliary DC voltage power supply nor an AC and DC voltage output.
    BUILT-IN TIMER
    Measuring Ranges: Time: 0.001 a 99999 s. (autorange)
    Cycles: 000.1 a 9999.9 Cycles (referenced frequency)
    Accuracy: 0.003% of the reading 1 dig.
    Time Start: By activation/deactivation of the power output.
    Timer Stop: Selectable between activation or deactivation
    of the Signal Monitor.
    SIGNAL MONITOR
    Dry Contact Input: Open circuit voltage: 10.2 V DC
    Short-circuit current: 25 mA.
    Fuse protected.
    Voltage Input: Level Limits: from 5 to 250 V AC/DC
    Input Impedance: 19 k
    Fuse protected.
    LET-400-RDC ingles 16/6/03 16:17 Pgina 2
    Power Parameters
    83 Northern Road
    West Heidelberg 3081
    Victoria, Australia
    email: power@parameters.com.au
    www.parameters.com.au

    You might also like