Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

5100 5150 - 5000 Series

Download as pdf or txt
Download as pdf or txt
You are on page 1of 8

Flygt 5100/5150

Submersible slurry pumps - A force you can rely on


When the pumping gets tough,
rely on Flygt submersibles
The re moval of abrasive slurry, an essential oper-
ation in many industries, makes heavy de mands
on slurry pumps. Designed to solve the specific
problems of pumping high-density slurry,
5100/5150, the latest genera tion of submersible
slurry pumps from ITT Water & Wastewater, is a
cost-effective solution offering true reliability.
Removing abrasive slurry is a tough job, even for a
dedicated slurry pump. Parts wear out, maintenance
and repair costs are high. In many cases, frequent
pump failures lead to costly production downtime.
Also, excessive sediment build-up in a sump costs time
and money to remove.
ITT Water & Wastewater, the worlds leading supplier
of submersible pumps and mixers, has focused on solv-
ing these problems for years, developing slurry pumps
that can handle the toughest, high-wear applications.
Why submersibles?
Flygt submersible slurry pumps offer many advantages
over dry-mounted pumps. Operating directly in the
slurry, the submersible pump requires no support
superstructure. Therefore it occupies less space and
installation costs are reduced.
Once installed, the pump requires almost no super-
vision. Since there are no long or exposed mechanical
links between the motor and the volute, less main-
tenance is required, and operating costs are much
lower. A submersible pump is, by definition, completely
flood-proof. Also, once submerged, it is virtually silent.
Submersible slurry pumps are often chosen as replace-
ments for dry-mounted pumps where pump failures
are frequent and maintenance costs are high. In instal-
lations of this type, Flygt slurry pumps have proved to
be a reliable alternative, offering continuous operation
with low maintenance costs.
Handling the toughest jobs
5100/5150 slurry pumps are a reliable, cost-effective
solution for handling the most abrasive slurries in a
broad spectrum of tough industrial environments, such
as mining and mineral processing, power generation,
steel manufacturing and many other sectors.
2 3
The Flygt slurry pump for
your specific duty is here
2 3
Model Rating Discharge Throughlet
5100 50Hz, 7.5-45 kW 100 mm/4 40 mm/1.6
60Hz, 12-70 Hp


5150 50Hz, 22-70 kW 150 mm/6 50 mm/2.0
60Hz, 35-105 Hp
0
10
20
30
40
50
60
Head
(m)
Flow (l/s)
0 50 100 150 200
0
10
20
30
40
50
60
70
80
50 0 100 150 200 250 (l/s) (l/s)
Head
(m)
0
50
100
150
200
250
300
0 500 1000 1500 2000 2500 3000 3500 4000 Flow
(USgpm)
(ft)
50 Hz
5100 5150
5150
5150
5100 5100
5100/5150 performance range
5100/5150 pumps are available with a wide range of motor power
ratings. Motors and wet ends are combined to give the optimum
solution for your specific duty. The result is trouble-free pumping of
high-density slurry and a more cost-effective pumping solution.
60 Hz
4 5
Cost-effective by design
Lower overall slurry pumping
costs due to internal cooling
An optional internal cooling system means that
the pump does not always need to be submerged.
It will continue pumping down to low slurry levels,
helping to prevent sediment build-up in a sump.
Early warning system
protects your budget
An inspection chamber between the seal unit
and the bearings has a built-in sensor for early
detection of any fluid build-up. This reduces
the risk of internal damage and increases opera-
tional reliability.
Designed for low life-cycle cost
Slim, robust design makes 5100/5150
pumps easy to install and service, in
turn reducing investment and main-
te nance costs.
Reliability and long life ensured
by wear resistant materials
Essential for a dedicated slurry pump,
all wear parts in the 5100/5150 series
are in high chrome. The impeller is
hardened for maximum wear resistance.
This ensures reliable operation with
the most abrasive slurries and a long
working life.
Wide range of motors ensures
optimum solution for your duty
5100/5150 pumps are fitted with
efficient, Class H motors as standard,
with built-in sensors for high tempera-
ture and leakage. Since the submersible
motor can handle 15 starts per hour, it
can operate in a smaller sump, which
means a more flexible installation.
Large throughlets handle
solids of varying sizes
Large throughlets ensure efficient pumping, even
when clumps of particles or large pieces of foreign
matter pass through the pump.
High wear resistance, maximum
hydraulic efficiency
The shape of the impeller, with a more sweptback
design of the vanes than on a conventional impel-
ler, ensures a more homogenous flow. This mini-
mizes the separation of solids from the carrying
fluid, resulting in extremely low wear rates and
sustained hydraulic efficiency.
4 5
Plug-in
TM
seal makes
replacement simple
The Plug-in
TM
seal system provides a
perfect fit and faster, simpler replace-
ment. The design also protects the seal
surfaces from contaminants during dis-
assembly and mounting.
Spin-Out
TM

seal protection
for prolonged
seal life and
increased
reliability
Spin-out
TM
is a
patented feature
that protects the outer seal by expelling
abrasive particles from
the seal chamber. This prolongs the
life of the outer seal unit and
increases reliability.
Additional seal
protection
The impeller hub is
equipped with effective
pump-out backvanes that
expel abrasive particles. There
is also a pressure isolation zone.
Together, these features provide addi-
tional seal pro tection by reducing pres-
sure in the mechanical seal area.
Agitator for coarser slurries
When pumping coarser slurries, like
sand, an agitator mounted on the
pump shaft helps to prevent solids
build-up on the sump floor.
7 6
The flexibility to match
your pumping needs
We call it clean sump technology
Agitator for coarser slurries
When pumping coarser slurries, like sand, an agitator
mounted on the pump shaft secures maximum
resuspension of settled particles. This makes them
easier to transport and ensures a clean sump.
Side-mounted mixer
for the really tough jobs
For large sumps with very coarse and heavy particles
and/or the need for homogenous slurry, a side-
mounted mixer is available. This works in combination
with the agitator for the toughest jobs where the
agitator alone cannot prevent sediment build-up.
Internal cooling reduces
sediment build-up
An optional internal cooling system means that the
pump can continue pumping down to low slurry
levels. This also helps to prevent sediment build-up
in the sump.
Let us advise you on pump selection
We have advanced selection tools, test facilities and
materials laboratories to help you choose the correct
slurry pump for your specific duty. Our system engi-
neer ing specialists have long experience of system
design and pump selection.
We also provide advice and assistance with sump
design and the need for an agitator in smaller sumps,
or a dedicated mixer in larger sumps.
The bottom line is a cleaner sump at the end of the
pumping cycle, and lower overall slurry handling costs.
Portable and easy to install
The ideal solution for most applications
Standardized for portable, wet installation, 5100/5150
slurry pumps are versatile and easy to install. Each
pump is supplied with a built-in support stand and
is free-standing, requiring no additional support
structure. The Victaulic

flange and coupling allows


fast, easy connection to a wide range of commonly
available fittings.
Agitator for coarser slurries.
Side-mounted mixer
for the really tough jobs.
Internal cooling for pumping
down to low levels.
7 6
Your local service network worldwide
The level of maintenance and support that you require
from your local service partner will differ according to
your situation. With ITT Water & Wastewater you can
choose the type of support package that precisely
meets your needs.
From simply supplying slurry pumps to your specifi-
cations, to full service assistance on system planning,
design, construction, implementation, operation or
maintenance: Our total service offering means that
you get the service you need, on your terms.
Service and
maintenance
15-year spare parts availability
We guarantee availability of spare parts
for 15 years after we stop production of a
pump model. This is just one of the ways
in which ITT Water & Wastewater meets
its long-term commitment to customers.
5
1
0
0
/
5
0

A

f
o
r
c
e

y
o
u

c
a
n

r
e
l
y

o
n
.
0
3
.
E
n
g
.
0
7
.
0
8



8
9
4
5
9
1



T
r
o
s
a

T
r
y
c
k
e
r
i

A
B


6
5
7
0
8
What can ITT Water & Wastewater do for you?
Integrated solutions for uid handling are offered by ITT Water & Wastewater as a
world leader in transport and treatment of wastewater. We provide a complete range
of water, wastewater and drainage pumps, equipment for monitoring and control, units
for primary and secondary biological treatment, products for ltration and disinfection,
and related services. ITT Water & Wastewater, headquartered in Sweden, operates in
some 140 countries across the world, with own plants in Europe, China and North and
South America. The company is wholly owned by the ITT Corporation of White Plains,
New York, supplier of advanced technology products and services.
www.ittwww.com

You might also like