Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 675 views

    Peugeot 307 1600cc E3 Nfu

    Uploaded by

    Zoli Borbely
    1) The document provides installation instructions for an LPG conversion kit on a 2003 Peugeot 307 1600cc engine. 2) It describes the necessary components, their locations, and details on fitting the SGIS N ECU, injection rails, reducer, and LPG tank. 3) Wiring instructions are also provided to connect the sequential gas injection system to the vehicle's wiring harness.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Peugeot 307 1600cc E3 Nfu

    Uploaded by

    Zoli Borbely
    675 views4 pages
    1) The document provides installation instructions for an LPG conversion kit on a 2003 Peugeot 307 1600cc engine. 2) It describes the necessary components, their locations, and details on fitting the SGIS N ECU, injection rails, reducer, and LPG tank. 3) Wiring instructions are also provided to connect the sequential gas injection system to the vehicle's wiring harness.

    Original Description:

    Peugeot 307 1600 NFU

    Original Title

    Peugeot 307 1600cc e3 Nfu

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1) The document provides installation instructions for an LPG conversion kit on a 2003 Peugeot 307 1600cc engine. 2) It describes the necessary components, their locations, and details on fitting the SGIS N ECU, injection rails, reducer, and LPG tank. 3) Wiring instructions are also provided to connect the sequential gas injection system to the vehicle's wiring harness.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    675 views4 pages

    Peugeot 307 1600cc E3 Nfu

    Uploaded by

    Zoli Borbely
    1) The document provides installation instructions for an LPG conversion kit on a 2003 Peugeot 307 1600cc engine. 2) It describes the necessary components, their locations, and details on fitting the SGIS N ECU, injection rails, reducer, and LPG tank. 3) Wiring instructions are also provided to connect the sequential gas injection system to the vehicle's wiring harness.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4
    At a glance
    Powered by AI
    The document provides installation instructions for a LPG conversion kit on a Peugeot 307, including necessary components, component installation details, and wiring connections.

    The necessary components include an SGIS N ECU, injection rails, a reducer, injectors, and a toroidal or traditional LPG tank.

    The manifold needs to be drilled with 5mm holes tilted at 30 degrees to the engine direction, threaded to M6, and cleaned before installing the injectors with strong screw locks. MAP nozzles also need to be fitted to the manifold center.

    PEUGEOT

    307 1600cc E3
    2003
    NFU
    SGISG00114 01/09/2004 1
    Before to proceed with the installation of the kit check the correspondence between the components present on the vehicle with those described in
    this technical sheet.
    Keep in consideration the general security rules, the specific instructions of the Sgis manual and the several components fitted.

    Attention: Fix all the pipes with the apposite clamps and verify the resistance
    Our Technical department must be informed of any different application made respect those suggested in this technical sheet.

    Attention:
    Bigas products are tested and guaranteed on vehicles which are in good conditions and for which has been made a servicing before the conversion.

    GAS system: LPG CNG
    ABS Power steering Air-conditioned Automatic trasmission
    Vehicle configuration:
    Necessary components
    Components location
    Notes:
    Bigas International Autogas Systems S.r.l. reserves the right to modify these information, that have only an indicative value without any notice or communication.
    Pag. 1/4
    TOROIDAL TANK MM.630X220 LT.51 II o LPG TRADITIONAL TANK MM.360X986 LT.90 Suggested tanks:
    FOTO1 FOTO2 FOTO3 FOTO4 FOTO5 FOTO6 FOTO7 FOTOSCHEMA Z:\SCHEDESGIS\IMM
    Bigas Components Installation

    1) SGIS N Ecu
    9) SGIS Injection Rails
    13) SGIS Reducer
    12) Gas Solenoid Valve

    Connection and Components O.E.M

    2) 12V +/- to connect to the battery B
    4) RPM signal to the connector S
    C) Injector first cylinder

    KIIGB085632
    LPG KIT SGISN 4 CYL. W/RAIL 2.5MM FROM 1.4LT TO 1.8LT SEQUENTIAL
    RELEA102010
    TIMING RELAY FOR PEUGEOT MODEL AEB 392
    PEUGEOT
    307 1600cc E3
    2003
    NFU
    SGISG00114 01/09/2004 1
    Components installation in detail
    Manifold and MAP nozzles fitting
    Rail fitting
    Reducer fitting
    SgisN ECU fitting
    Bigas International Autogas Systems S.r.l. reserves the right to modify these information, that have only an indicative value without any notice or communication.



    Fix with the apposite racket the Ecu to the car body



    Fix with the apposite bracket the reducer


    Attention: Fix all the pipes with the apposite clamps and
    verify the resistance.
    Pag. 2/4
    Fit the SgiS N Ecu as the picture shows, to the car bearing
    body
    Fit the reducer, as the picture shows, vertically, with gas
    outlet driver's cabin direction
    After having removed the aspiration manifold,
    proceed with the scribing and the drilling of it with a
    drill of diameter 5mm(see the picture) making holes
    tilted at 30 respect the engine direction, thread at
    M6 and clean it carefully and fix the injectors with a
    strong screw lock.
    Fix the Map nozzles on the manifold centre.
    Attention: Fix all the pipes with the apposite clamps
    and verify the resistance








    Attention:Fix all the pipes with the apposite clamps and
    verify the resistance
    Fit the injection rail horizontally, as the picture shows
    Fix with the apposite bracket the rails to the manifold
    PEUGEOT
    307 1600cc E3
    2003
    NFU
    SGISG00114 01/09/2004 1
    Fit the tank in the position as the picture shows
    Make the fitting with the apposite supports and verify the stability Attention:
    Before starting to work on the electric system. disconnect the battery
    Instruction for tank fitting
    Bigas International Autogas Systems S.r.l. reserves the right to modify these information, that have only an indicative value without any notice or communication.
    Sequential Gis wiring Vehicle wiring
    Picture
    reference
    number
    Input
    RED/BLACK
    BLACK
    Connect to the battery terminal
    Positive with fuses 7.5A max
    Negative

    2
    RPM signal
    BROWN

    4
    Pressure meter

    Connect to the Sgis wiring 6
    Gas temperature
    sensor

    BLACK Connect to the balck wire of the Rail 9
    ORANGE/BLACK Connect to the orange wire of the Rail
    GAS services
    BLUE Connect to the positive of the solenoid valve 12
    BLACK Connect to the negative of the solenoid valve
    Water temperature
    sensor

    ORANGE Connect to the orange wire of the Reducer 13
    BLACK Connect to the black wire of the Reducer
    +12 VOLT




    Pag. 3/4
    Connect to coil group plug PIN N1 wire colour light blue
    Using the cable SA144U connect the white-red wire to of one of
    the positive wires of the injectors
    Wiring connection scheme
    PEUGEOT
    307 1600cc E3
    2003
    NFU
    SGISG00114 01/09/2004 1
    Bigas International Autogas Systems S.r.l. reserves the right to modify these information, that have only an indicative value without any notice or communication.
    Pag. 4/4

    You might also like