iR1023-Service Guide

Canon
S
S
e
e
r
r
v
v
i
i
c
c
e
e
G
G
u
u
i
i
d
d
e
e

imageRUNNER 1023 Series Service Guide

IMPORTANT
THIS SERVICE GUIDE INCLUDES THE INFORMATION RELATING TO THE imageRUNNER 1023/1025 SERIES.
SPECIFICATIONS AND OTHER INFORMATION CONTAINED HEREIN MAY VARY SLIGHTLY FROM ACTUAL
DEVICE VALUES OR THOSE FOUND IN ADVERTISING AND OTHER PRINTED MATTER.
USE OF THIS SERVICE GUIDE SHOULD BE STRICTLY SUPERVISED TO AVOID DISCLOSURE OF
CONFIDENTIAL INFORMATION.
ALL PRICES LISTED ARE SUBJECT TO CHANGE WITHOUT NOTICE.
PART NUMBERS LISTED MAY BE CHANGED WITHOUT NOTICE TO REFLECT ENGINEERING REVISIONS.
Service Guide History
November 2006
o Revision 0: Service Guide Released
December 2008
o Cover Page changed - This Service Guide can be used for servicing the imageRUNNER 1023
Series and imageRUNNER 1025 Series (Refer to the Dealer Price List for the most up-to-date
Item Numbers.)
imageRUNNER 1023 Series Service Guide November 2006
Rev. 0 Page i

Published by
Canon U.S.A., Inc.
One Canon Plaza
Lake Success, NY 11042-1198
1-800-OK-CANON

Canon U.S.A. Homepage: http://www.usa.canon.com
Canon U.S.A. Internet e-Support Center website: http://www.support.cusa.canon.com
Canon U.S.A. ISG Central website: http://isgcentral.cusa.canon.com
Canon Network Access (CNA) website: http://www.cna.cusa.canon.com

Distributed in the United States by Canon U.S.A., Inc.

This Service Guide is the property of Canon U.S.A., Inc.
Canon U.S.A., Inc. 2006. All rights reserved.

The information contained in this Service Guide constitutes confidential information of Canon U.S.A., Inc.

Pursuant to the authorized Service Agreement with Canon U.S.A., Inc., this Service Guide is solely for reference
purposes and may be used only by an authorized Service Provider of Canon U.S.A., Inc. No part of this Service
Guide may be reproduced or transmitted in any form by any means, electronic or mechanical, for any purpose without
the prior written consent of Canon U.S.A., Inc., except as expressly permitted herein.

Pursuant to the authorized Service Agreement with Canon U.S.A., Inc., Service Provider agrees to indemnify Canon
U.S.A., Inc. and to hold it harmless from and against any and all claims arising out of Service Providers possession,
use, or misuse of this Service Guide.

As an authorized Canon dealership for the imageRUNNER 1023 Series you agree that the imageRUNNER 1023
Series and its related hardware/software accessories will not be exported from the United States except in strict
accordance with the Export Administration Regulations of the U.S. Department of Commerce and other U.S. laws and
regulations controlling exports from the United States.

Canon U.S.A., Inc. from time to time updates this online Service Guide and may modify the information and/or
specifications contained in it at any time without notice. Additionally, all prices and availability dates listed herein are
subject to change without notice. The latest version is available online at the ISG Central and e-Support websites
noted above. Please make certain that you are using the latest version. Specimens of Web pages included herein are
for illustration purposes only.

Canon and imageRUNNER are trademarks of Canon Inc.

All other company names and product names may be trademarks or registered trademarks of their respective owners,
and are hereby acknowledged.

Rev. 0 Page ii

Table of Contents

I. Product Overview, Configuration, and Accessories -------------------------------------------- 1
A. Overview------------------------------------------------------------------------------------------------------------------ 1
II. Optional Accessories-------------------------------------------------------------------------------------- 2
A. Cabinet-V1---------------------------------------------------------------------------------------------------------------- 2
B. PCL Printer Kit-M1----------------------------------------------------------------------------------------------------- 2
C. Network Interface Adapter IN-E11-------------------------------------------------------------------------------- 2
D. Card Reader-E1--------------------------------------------------------------------------------------------------------- 2
E. Cassette Feeding Module-N1 -------------------------------------------------------------------------------------- 2
F. Cassette-AD1------------------------------------------------------------------------------------------------------------ 2
G. Braille Label Kit-A1---------------------------------------------------------------------------------------------------- 2
H. Configuration------------------------------------------------------------------------------------------------------------ 3
I. Box Contents (for Main Unit)--------------------------------------------------------------------------------------- 4
III. Dealer Sales/Service Authorization------------------------------------------------------------------- 5
A. Technician/System Engineer--------------------------------------------------------------------------------------- 5
IV. Educational Training--------------------------------------------------------------------------------------- 5
A. Training Overview ----------------------------------------------------------------------------------------------------- 5
B. Who Should Attend --------------------------------------------------------------------------------------------------- 5
C. Course Format ---------------------------------------------------------------------------------------------------------- 5
D. Course Highlights ----------------------------------------------------------------------------------------------------- 5
E. Prerequisites ------------------------------------------------------------------------------------------------------------ 6
F. What You Will Learn -------------------------------------------------------------------------------------------------- 6
G. Course Equipment----------------------------------------------------------------------------------------------------- 6
H. Certification-------------------------------------------------------------------------------------------------------------- 6
I. Training Facilities------------------------------------------------------------------------------------------------------ 6
J. Service Materials------------------------------------------------------------------------------------------------------- 6
V. Servicing Notes---------------------------------------------------------------------------------------------- 7
A. Recommended System Engineer Requirements ------------------------------------------------------------ 7
B. Power and Plug Requirements------------------------------------------------------------------------------------ 8
C. Installation Times------------------------------------------------------------------------------------------------------ 9
D. Soft Counter ------------------------------------------------------------------------------------------------------------- 9
E. Firmware Updates ----------------------------------------------------------------------------------------------------10
1. Upgrading via the Service Support Tool -----------------------------------------------------------------------10
2. Computer Requirements for Downloading Firmware-------------------------------------------------------10
F. License Management System (LMS)----------------------------------------------------------------------------11
G. Consumables-----------------------------------------------------------------------------------------------------------12
H. Periodic Replacement Parts---------------------------------------------------------------------------------------12
I. Consumable Parts----------------------------------------------------------------------------------------------------12
J. Suggested End User Maintenance ------------------------------------------------------------------------------12
K. Service Tools-----------------------------------------------------------------------------------------------------------12
VI. Suggested End-User Customer Service Offerings----------------------------------------------13
A. Maximum Monthly Copy Volume --------------------------------------------------------------------------------13
B. Warranty Support -----------------------------------------------------------------------------------------------------13
1. End-User Warranty Conditions-----------------------------------------------------------------------------------13
2. Warranty Administration Reduction Program (WARP) -----------------------------------------------------14
VII. Product Technical Support Offerings ---------------------------------------------------------------15
A. Dealer Support Requirements ------------------------------------------------------------------------------------15
Rev. 0 Page iii

B. Canon USA Support Offerings -----------------------------------------------------------------------------------16
1. Canon USA Technical Support Center-------------------------------------------------------------------------16
2. Internet Support ------------------------------------------------------------------------------------------------------18
VIII. Appendix------------------------------------------------------------------------------------------------------20
A. Specifications----------------------------------------------------------------------------------------------------------20
B. Warranty -----------------------------------------------------------------------------------------------------------------22
1. Main Unit Limited Warranty ---------------------------------------------------------------------------------------22
2. GPR-22 Drum Unit Limited Warranty---------------------------------------------------------------------------23
C. List of Tables-----------------------------------------------------------------------------------------------------------24
Rev. 0 Page iv

I. Product Overview, Configuration, and Accessories
A. Overview
The imageRUNNER 1023 Series includes the imageRUNNER 1023iF,
imageRUNNER 1023N, and imageRUNNER 1023 and are digital models in
Segment 2 operating at up to 23 pages-per-minute (LTR). Each model within
this Series supports advanced digital copying and printing (standard Canon
UFRII LT; optional PCL 5e/6), with built-in color scanning (TWAIN/WIA)
capabilities enabling scanned documents to easily convert hard-copy based
information into electronic format, and Automatic Duplexing.
The imageRUNNER 1023 Series can be connected directly to a workstation
using the standard USB 2.0 High Speed port or as a shared network resource
through an available Ethernet port (standard with imageRUNNER
1023iF/1023N; option for imageRUNNER 1023).
An Automatic Document Feeder is a standard feature with the imageRUNNER
1023iF/1023N models. The imageRUNNER 1023 comes standard with a
Platen cover.
The imageRUNNER 1023iF model offers color-enabled document Send
capabilities and Super G3 Fax capabilities as standard.
imageRUNNER 1023 Series Comparison (Table 1)
Feature
imageRUNNER
1023iF
imageRUNNER
1023N
imageRUNNER
1023
Copy Standard Standard Standard
Print
Standard
(Canon UFRII LT)
Optional
(PCL 5e/6)
Standard
(Canon UFRII LT)
Optional
(PCL 5e/6)
Standard
(Canon UFRII LT)
1

Optional
(PCL 5e/6)
Connectivity
Standard
(USB 2.0 and 10/100
Base TX)
Standard
(USB 2.0 and 10/100
Base TX)
Standard
(USB 2.0)
Optional
(10/100 Base TX)
Color Scan
2
Standard Standard Standard
Color Send Standard N/A N/A
Fax Standard N/A N/A
Document
Feeder
Standard Standard
N/A
(Platen Cover only)
Auto
Duplexing
Standard Standard Standard
Memory
Capacity
256MB RAM 128MB RAM 128MB RAM
As an Energy Star

Partner, Canon U.S.A., Inc. has determined that this
product meets the Energy Star guidelines for energy efficiency.
3

1
Network printing requires the optional Network Interface Adapter-IN-E11 on the imageRUNNER 1023 model.
2
Color Scanning is available through the USB 2.0 Port.
3
If any options are installed, the printer may no longer be Energy Star qualified.
Rev. 0 Page 1

II. Optional Accessories
A. Cabinet-V1
The Cabinet-V1 is available for placing the imageRUNNER 1023 Series
devices in centralized locations. The Cabinet also provides an additional area
where paper and consumables can be stored.
B. PCL Printer Kit-M1
Enables printing in Windows environments using PCL 5e/6 page description
languages. For PCL operations, data sent to the imageRUNNER device will be
spooled directly to the systems memory, which provides ample space to
temporarily hold data for printing.
C. Network Interface Adapter IN-E11
The Network Interface Adapter IN-E11 is required for the imageRUNNER 1023
device to extend system capabilities to multiple users and allow network
printing and Remote UI Capabilities on the network.
D. Card Reader-E1
The Card Reader-E1 manages users with intelligent cards that must be
inserted in the system before granting access to functions.
Note: The Card Reader Attachment-D2 is required to attach the Card Reader-
E1 to the device.
E. Cassette Feeding Module-N1
This option adds an additional 500-sheet paper cassette to an imageRUNNER
1023 Series device for a maximum paper capacity of up to 1,100 sheets.
Maximum capacities, sizes and weights are the same as the standard 500-
sheet Paper Cassette.
F. Cassette-AD1
The Cassette-AD1 does not add to the paper capacity, but rather serves to
replace an existing cassette. This may be utilized if the user wishes to keep an
additional cassette on hand to hold a different size paper. Rather than switch
to the paper size in the current cassette, they can simply replace the entire
cassette with the Cassette-AD1 that contains the desired paper size.
G. Braille Label Kit-A1
The Braille Label Kit-A1 contains transparent Braille labels that affix to each
hard key on the control panel except for the numeric keys. The numeric
keypad has a protruded dot on the "five key," providing familiar entry for the
visually impaired. This kit provides visually impaired users with improved
access to copy and fax functions.
Rev. 0 Page 2

H. Configuration
Note: Configurations shown below are for reference purposes only and are
subject to change without notice. Please refer to the Dealer Price List on the
ISG Central Website for the most up-to-date Item Numbers.
Configuration (Table 2)
Item
Item
Number
4

imageRUNNER 1023iF 0483B003AA

imageRUNNER 1023N 0463B001AA

imageRUNNER 1023 0748B001AA

4
Item Numbers and Part Numbers are subject to change without notice.
Rev. 0 Page 3

Accessories
Cassette Feeding Module-N1 0859B002AA
Cabinet-V1 5709A007AA
Cassette-AD1
5
0465B002AA
Card Reader-E1
6
7782A001AA
Card Reader Attachment-D2 0421B002AA
Basic Card Set 0500A002AA
Copy Card Set 1 0499A004AA
Braille Label Kit-A1 7518A002AA
PCL Printer Kit-M1 0490B001AA
Network Interface Adapter IN-E11
7
0485B001BA
Supplies
Transparency Type E (100 Sheets / Box) 6101AJ28AA
Matte Labels 30 up (100 Sheets / Box) 6101AJ31AA
Consumables
GPR-22 Drum Unit 0388B003AA
GPR-22 Black Toner 0386B003AA

I. Box Contents (for Main Unit)
imageRUNNER 1023 Series Box Contents (Table 3)
imageRUNNER 1023iF 120V (only for imageRUNNER 1023iF)
imageRUNNER 1023N 120V (only for imageRUNNER 1023N)
imageRUNNER 1023 120V (only for imageRUNNER 1023)
Power Cord Unit (UL Type)
Drum Unit
Modular Cable (UL) (only for imageRUNNER 1023iF)
Quick Start Guide
Basic Operation Guide
CD User Software
Fax Destination Label (only for imageRUNNER 1023iF)
Copier Machine Warranty
Drum Warranty
Installation Checklist
Registration Card
Package Opening Manual Sheet
BOG Data Revising Sheet
Caution For Toner Reloading
Ring Core (for USB Cable) (only for imageRUNNER 1023iF/1023N)
Attaching Ring Core Sheet (only for imageRUNNER 1023iF/1023N)

5
This option does not add to the paper capacity it serves to replace an existing cassette.
6
Requires the Card Reader Attachment-D2 for installation.
7
Option for the imageRUNNER 1023. The Network Interface Adapter IN-E11 must be installed for network printing and Remote UI
(User Interface) capabilities.
Rev. 0 Page 4

III. Dealer Sales/Service Authorization
A. Technician/System Engineer
To become authorized and maintain authorization to service an
imageRUNNER 1023 Series device, each Dealer location must have at least
one employee who has successfully completed the appropriate
imageRUNNER Training Program and received certified status.
IV. Educational Training
A. Training Overview
The imageRUNNER 1300 Series Training course is a Self-Paced Computer
Based Training (CBT) course that includes the imageRUNNER 1023 Series
models. The course provides the basic knowledge required to properly
operate, maintain, and service the imageRUNNER 1300 Series and the
imageRUNNER 1023 Series models. The technician can easily access each of
the CBT training modules from the main menu as well as navigate to a specific
subject. Technicians can simply maneuver through this course, which focuses
on digital technology and disassembly of major components required to repair
these machines.
B. Who Should Attend
It is highly recommended that all technicians who are required to install and
support these products and their accessories successfully complete this
training program.
Note: In keeping with our current support policy, only those technicians who
have successfully completed or who are enrolled in the training program will
be entitled to live, phone-based support through our Technical Support Center
(TSC). Self-Service Support (software downloads, knowledgebase, support
forums, technical publications) will continue to be available through our e-
Support website for all Technicians (refer to the Technical Support section for
entitlement details).
C. Course Format
The course is a Computer Based Training Course (CBT).
D. Course Highlights
The following are the course highlights for the training program:
Students may work at their own pace.
The Image Formation Process is reviewed.
Assembly and Disassembly sequences are structured for students to
perform step-by-step techniques on training machines.
Maintenance, Adjustment and Replacement procedures for each major
machine area.
Troubleshooting Scenarios are presented for application of knowledge and
skills.
Rev. 0 Page 5

E. Prerequisites
The training course assumes that imageRUNNER Connectivity Quest has
already been successfully completed by the student.
F. What You Will Learn
You will learn the necessary skills to deliver effective field service as well as
the operation of the imageRUNNER 1300 Series and imageRUNNER 1023
Series models, including important disassembly and troubleshooting skills.
This course uses some of the latest technology in the interactivity of the
disassembly techniques that will have you not only seeing how the machine is
disassembled but also allows you to take part in this process.
G. Course Equipment
To successfully complete this course, an imageRUNNER 1300 Series device
or an imageRUNNER 1023 Series device is strongly recommended.
A personal computer (PC) is required with the following system requirements
for running the course:
IBM compatible computer
Intel Pentium II 200MHz or greater
Windows 95/98/2000/XP, Windows NT 4.0
Minimum 32MB RAM
Minimum 8X CD-Rom drive
Sound Card
External or built-in speakers or headphones
Color Monitor set at 800 x 600, High Color
H. Certification
Technicians who have previously received certification on the imageRUNNER
1300 Series products will automatically receive certification on the
imageRUNNER 1023 Series models. Successful completion of the CBT
course will provide certification on the following models:
imageRUNNER 1310/1330/1370F
imageRUNNER 1630/1670F
imageRUNNER 1023iF/1023N/1023
I. Training Facilities
This Self-Paced CBT course can be conducted at any facility that is suitable
for student learning.
J. Service Materials
Service materials may be ordered through the Canon Network Access (CNA)
website http://www.cna.cusa.canon.com.
Training Materials (Table 4)
Model/Accessory Item Part Number
Service Manual DU7-1207-000
imageRUNNER 1019J/1023iF/1023N/1023
Parts Catalog DU7-3181-000

Rev. 0 Page 6

V. Servicing Notes
A. Recommended System Engineer Requirements
For a Canon copier dealership, a System Engineer
8
(SE) is recommended for
working with Canon connectivity products and should have the following basic
job functions:
Systems integration (pre-sale and post-sale)
Installation
Education of customers and dealership personnel
Troubleshooting
In order to successfully perform these tasks, it is crucial that the SE have
strong computer skills and working knowledge in the following areas (listed in
order of importance):
The major computer platforms (IBM compatible and Macintosh)
Computer hardware (including cabling)
Computer software (including drivers)
Operating systems
o Windows NT 4.0 Workstation/Server
o Windows 2000 Professional/Server/Advanced Server
o Windows XP Home/Professional (32 bit)
o Windows XP Professional x64 (64 bit)
o Windows Server 2003 (32 bit and 64 bit versions)
o Mac OS versions 10.1.5 and up (PS/PCL)/10.2.8 10.4.2 (UFR II)
Network Operating Systems:
o Novell NetWare 3.x, 4.x, 5x, and 6.x
o Windows NT/2000/2003
o Mac OS X
Protocols:
o TCP/IP
o IPX/SPX
o NetBIOS
o AppleTalk
Printing
Scanning

8
A System Engineer (SE) is a professional title often used by hardware vendors for individuals who perform systems related tasks,
such as analysis, design, and programming. System Engineers are also often involved in pre-sales activities.
Rev. 0 Page 7

In addition, computer skills and working knowledge in the following areas may
also be helpful:
Other computer platforms (mainframe and UNIX)
Networking
Basic electronics
Education/Training, (listed in preferred order), of a successful Canon
dealership SE are:
Novell CNA or Novell CNE / Microsoft MCSE certification
A Canon copier Service Technician with two years of experience
centered on connectivity products
A degree in computer science, engineering, or a computer technician with two
years of experience is required in the above areas.
B. Power and Plug Requirements
The imageRUNNER 1023 Series requires a NEMA 5-15R receptacle for
proper operation. Confirm that a NEMA 5-15R receptacle is available prior to
installation.
Power and Plug Requirements (Table 5)
imageRUNNER 1023 Series Main Unit
(imageRUNNER 1023iF shown)

NEMA 5-15R Receptacle

Rev. 0 Page 8

C. Installation Times
The installation times shown below are the estimated times required for
installation starting from an unpacked condition. It is calculated based on man-
hours and is for reference purposes only. Detailed installation procedures can
be found in the imageRUNNER 1019J/1023iF/1023N/1023 Service Manual.
Estimated Installation Times (Table 6)
Description Estimated Time
Main Unit 10 Minutes
Cassette Feeding Module-N1
9
5 Minutes
PCL Printer Kit-M1 20 Minutes
10
Network Interface Adapter IN-E11 10 Minutes
Card reader-E1 & Card reader Attachment-D2 15 Minutes
Estimated Installation Times shown, unless otherwise indicated, are based on a minimum of two (2)
experienced technicians.
D. Soft Counter
The imageRUNNER 1023 Series uses soft counters. The control panel
normally displays six counters when the counter check button is pressed. The
counter description can be changed, enabled, or disabled in service mode,
except for counter one. The counter one setting cannot be changed under any
circumstances. The maximum number of digits displayed is eight.
Refer to the Service Manual for complete details on the Soft Counter
configurations.

9
End-user installable.
10
Time is increased to 25 minutes when installing to the unit which has Network and Fax functions.
Rev. 0 Page 9

E. Firmware Updates
The main firmware that controls each function and equipment is stored in the
Flash ROM directly mounted to the controller PCB, therefore it is essential to
use a PC to download the firmware. Firmware can be downloaded for the
SYSTEM and BOOT in the main controller, and PCL ROM. Firmware cannot
be downloaded for the DC controller.
The PCL ROM holds the firmware of the main controller, at times calling for
upgrading of the firmware if the PCL ROM is installed.
1.
2.

Upgrading via the Service Support Tool
The SYSTEM, BOOT, and PCL ROM, firmware can be downloaded from a
service PC via a USB cable, but cannot be downloaded via a network.
Computer Requirements for Downloading Firmware
Canon USA strongly recommends that dealers have a computer (desktop
or laptop) available for use as a primary service tool to adequately service
the imageRUNNER 1023 Series devices.
The following are the recommended Desktop PC or Laptop specifications
11

to use for the download:
CPU: Celeron 400 MHz or higher
Memory: 128MB or higher of RAM
Free HDD Capacity: 1 GB or more of available hard disk space
Network Connection: 10Base-T/10Base-TX or presence of PCMCIA slot
(for Ethernet card)
CD-ROM Drive (If not equipped, use network to copy from CD-ROM to
PC.)
Operating System: Windows 2000/XP

11
Specifications are subject to change without notice.
Rev. 0 Page 10

F. License Management System (LMS)
Certain optional software features are preinstalled on all new units. To activate
the software programs, the feature must be licensed through the License
Management System (LMS) server. This replaces the need for additional
hardware or dongles to activate new software.
The LMS is a server based software license program. Each purchased
software application package contains a license access number certificate with
the documentation. The Dealer must enter the license access number and the
device serial number into the LMS server to generate a license Key. The LMS
Server can be accessed through URL: http://www.canon.com/lms/ir/.

Rev. 0 Page 11

G. Consumables
Main Unit Consumables List (Table 7)
Description Part Number Quantity
Estimated Life
(copies/prints
12
)
Remarks
GPR-22 Drum Unit 0388B003AA 1 26,900
Waste toner is
mounted in the
drum unit and the
machine stops
when a full tank
condition is
detected.
GPR-22 Black Toner 0386B003AA 1 8,400
Based on 6%
coverage.
H. Periodic Replacement Parts
The imageRUNNER 1023 Series do not have any periodic replacement parts.
I. Consumable Parts
The imageRUNNER 1023 Series do not have any consumable parts.
J. Suggested End User Maintenance
The end user should perform the following on a regular basis as necessary so
that the machine may be kept in the best operating condition at all times.
Item Maintenance Cycle
Pressure plate/platen guide cleaning
Copyboard glass/reading glass
cleaning/copyboard holder (jump board)
cleaning
Fixing pressure roller cleaning
Transfer roller cleaning
ADF roller cleaning
Exterior cleaning
As required
Toner cartridge replacement
Toner bottle replacement
When the message appears
K. Service Tools
In addition to the standard tools used to service this device, the following
service tools should also be carried according to its rank when servicing an
imageRUNNER 1023 Series device.
Service Tools List (Table 8)
Description Rank Part Number Remarks
Digital Multimeter A FY9-2002-000 Used for electrical checking.
NA-3 Test Chart A FY9-9196-000
This chart is used when checking
and adjusting images.
Rank Description
A: Each service person is expected to carry one.
Refer to Chapter 17 in the imageRUNNER 1019J/1023iF/1023N/1023 Service
Manual for complete details.

12
Value is based on LTR sized paper.
Rev. 0 Page 12

VI. Suggested End-User Customer Service Offerings
A. Maximum Monthly Copy Volume
Maximum Monthly Copy Volume / Optimum Performance (Table 9)
imageRUNNER 1023 Series
Suggested maximum monthly print/copy
volume
Up to 30,000 impressions
Optimum performance range
(prints/copies per month)
Approximately 1,500 to 10,000 impressions
Note: The maximum monthly volume (print/copy) represents the maximum
number of pages the machine can produce within a one-month period (based
upon letter size paper). However, the device should not be used to produce
this or a greater volume on a consistent monthly basis.
B. Warranty Support
1. End-User Warranty Conditions
imageRUNNER 1019/1023 Series Limited Warranty
Ninety (90) days after delivery to the original purchaser or 60,000
prints/copies, or a combination of both, whichever comes first.
This warranty covers the Canon brand product accessories. For
detailed warranty information, please refer to the Limited Warranty
located in the Appendix.
Note: No warranty is given on any consumables or consumable
parts, such as paper, toner, chemicals, or pick-up rollers.
GPR-22 Drum Unit Drum Limited Warranty
Full Credit:
5,200 prints or copies (or a combination of both)
or 30 days after delivery to the original purchaser,
whichever comes first.
Prorated Credit:
21,000 prints or copies (or a combination of both)
or 30 days after delivery to the original purchaser,
whichever comes first.
For detailed warranty information, please refer to the GPR-22 Drum
Unit Limited Warranty located in the Appendix.

Rev. 0 Page 13

2. Warranty Administration Reduction Program (WARP)
Dealers who purchase an imageRUNNER 1023 Series devices will receive
WARP credit during the month following their purchase. The credit covers
the dealers cost for defective parts with a dealer cost under $300 replaced
during the term of the end-user warranty. Defective parts with a dealer cost
over $300 replaced during the term of the end-user warranty should be
returned along with all applicable documentation to Canon USA for
processing.
To request parts reimbursement credit, complete the e-Tag warranty claim
form that can be found in the warranty section of the Canon USAs e-
Support Center. Print out the e-Tag form and submit it to the address
provided, along with the defective part(s) and a copy of the machines
service history log.
Refer to the Warranty terms and conditions in the Appendix of this Service
Guide for complete details for warranty coverage.
Your Regional Service Office personnel can answer questions on the
WARP program.
Rev. 0 Page 14

VII. Product Technical Support Offerings
A. Dealer Support Requirements
The imageRUNNER 1300 Series Technical Training is required to receive
technical support for these imageRUNNER 1023 Series products. Refer to the
Canon Technical Support Center (TSC) for further details.
In order to ensure that each Dealer receives the highest level of support and in
turn resolve the end users problems quickly and accurately, here are several
recommendations to maximize your technical support request.
The dealer support personnel should check technical documentation
(Manuals, Tech. Pubs, etc.) and the e-Support website (24 hours a day, 7
days a week) before calling Canon USAs Technical Support Center (TSC)
since your concern may have already been addressed and documented.
Have your Support ID Number ready when you call the TSC and prepare to
be at the location where the engine or application is accessible. This
dramatically improves the TSCs ability to help troubleshoot the problem
and eliminate the guesswork when answering a specific question. There
are many causes to various problems, but by being at the location when
calling, it takes the speculation out of the troubleshooting process by
supplying accurate answers to what the device/application is doing.
Provide the serial number of the installed engine or application you are
troubleshooting. While this is required for access to support, it will also
provide the Specialist with information about previous calls for support.
Be prepared to provide environment specific information and any other site-
specific variables.
Submit and update your profile information such as cell phone number, e-
mail address, or company address. To do so, you can logon to e-Support
and access the Current Profile section to make updates or call Canon
USAs TSC. Accurate profile information will allow for quick contact if more
information is required from the caller later on.
At the completion of each call, a ticket number is provided. If the Support
Specialist does not provide a number, the caller should ask for it.
A return call from a Dealer Technician/Systems Engineer with a resolution
is extremely helpful. The information Canon USA receives from you on
what actually resolved the problem is sent to the Support Specialist and
enables them to better assist other callers who may have the same
problem just addressed.
Making certain that all of our support partners get the highest quality
technical support as fast as possible makes everyone more productive and
ultimately delivers better results and customer satisfaction.
Following some of these basic guidelines, and working as a team, helps
everyone achieve their support goals.
Rev. 0 Page 15

B. Canon USA Support Offerings
The following support mechanisms were established to deliver high quality,
timely technical support services and product information to imageRUNNER
dealerships. These support services cover areas such as system and user
software, networking and connectivity issues, electro-mechanical operations,
and other hardware servicing.
1. Canon USA Technical Support Center
Live phone based technical support from the Canon USA TSC is limited to
those technicians who are certified to service an imageRUNNER 1023
Series device or are enrolled for technical training.
Self-Service Support (software downloads, knowledgebase, support
forums, technical publications) will continue to be available through the e-
Support Center website at http://www.support.cusa.canon.com for all
Technicians and Systems Engineers.
Canon USA provides a time sensitive call escalation process for all
authorized imageRUNNER 1023 Series Dealers. The TSC is the single
point of entry for this process. Once a call is placed to the TSC and
information is logged into the call management system, a case number will
be assigned to the call. Every effort is made to resolve the problem during
the call. Calls that cannot be resolved during the initial call and require
escalation must follow the process below. The status of all escalated cases
can be viewed via the e-Support Center or by calling the TSC.

Rev. 0 Page 16

Canon USAs TSC support responsibilities are as follows:
All technical support for the end-user is provided solely by the
contracted servicing Dealer.
The Canon USA TSC will be the central contact/escalation for the
reporting of all known outstanding hardware and software issues to
Canon USAs engineering and development groups.
The Canon USA TSC will be available to all Authorized Dealers,
Systems Engineers, and Technicians who have successfully completed
the Training Program.
The TSC will provide technical information regarding all Canon
associated hardware and software products.
The TSC will deploy, as required through proper escalation procedures,
all on-site Canon USA Digital Solutions Specialist and Systems
Engineers.
Rev. 0 Page 17

2. Internet Support
a) Canon USA e-Support Center Website
Canon USAs Systems and Technical Support Division provides high
quality e-Support via the Internet and is only available for Canon USA
Authorized Servicing Dealers.
Canon USAs e-Support is designed to give dealer Systems Engineers
and Technicians access to technical support information via the
Worldwide Web.
The following functions and information can be accessed:
Proactive notification of new releases, patches, Technical
Publications, and other information via e-mail
Search for Technical Solutions with the Integrated Knowledge
Management System through natural language query
Read or download on-line documentation
Download patches and their Readme files
Download Firmware and Software Drivers
Track and Modify logged Cases
Review all open Cases
In order to access e-Support, you must first register for a Support ID.
To register for a Support ID, go on-line to the Canon USA Systems and
Technical Support Divisions e-Support Center website at
http://www.support.cusa.canon.com. Click on the Register button and
follow the instructions for registration. This service is available at no
additional charge to all authorized dealers.

Rev. 0 Page 18

b) Canon USA ISG Central Website
Complete versions of the Service Guides are available on the Canon
USA ISG Central website (http://isgcentral.cusa.canon.com/).
Access is limited to the Authorized Dealers Management staff, please
contact your Dealer Administrator to request access to the System and
Technical Support Section of ISG Central.

When the end-user is logged onto ISG Central they must select the
Systems & Technical Support button to access the Service Guides area
of the website as shown below.

Rev. 0 Page 19

VIII. Appendix
Note: All specifications are for reference purposes only and are subject to change
without notice.
A. Specifications
imageRUNNER 1023 Series Main Unit (Table 10)
Type Monochrome Digital Multifunction Imaging System
Copying Method Laser Dry Electrostatic Transfer
Developing System Dry Single-Component Projection Developing System
Fixing System RAPID Fusing System
Acceptable Originals Sheets, Books, and 3D Objects (up to 4.4 lbs)
Maximum Original Size 8.5" x 14" (Legal)
Maximum Copy Size 8.5" x 14" (Legal)
Minimum Copy Size 3" x 5"
256 MB RAM (imageRUNNER 1023iF)
Image Server Memory
128 MB RAM (imageRUNNER 1023N/1023)
Maximum Copy Reservation 5
Scanning Resolution 600 dpi x 600 dpi
Copy/Print Resolution Enhanced 1,200 x 600 dpi
Halftone 256 levels
Paper Feeding 1 cassette, stack bypass, optional Cassette Feeding Module-N1
Manual Bypass Up to 100 Sheets
Paper Capacity 1 x 500 + 100 (Standard 600 Sheets / Maximum 1,100 Sheets)
Acceptable Paper Weight
17lb 24lb Bond (Cassette),
14lb 35 lb Bond (Stack Bypass)
Duplexing Std. Automatic Duplexing
Magnification
From platen glass: 50% - 200% (in 1% increments)
From DADF: 50% - 200% (in 1% increments)
Preset Red / Enlg 50%, 64%, 78%, 129%, 200%
Multipage Copy Speed Approximately 23 sheets/minute (LTR)
First Copy Speed
13
Less than 8 seconds from platen glass, less than 12 seconds from DADF
Warm-Up Time
imageRUNNER 1023iF/1023N: Less than 16 seconds (Main Power Switch On)
imageRUNNER 1023: Less than 13.5 seconds (Main Power Switch On)
1 Second or less (From sleep mode) (Temperature 68F (20C), humidity: 65% ;
from when the machine turns on the main power switch until the standby display
appears.
Maximum Copy Run 1 99
Automatic Exposure Auto (Text), Manual (9 Levels)

13
Warm-up/First Copy times may differ depending on the condition and environment of the device..
Rev. 0 Page 20

Dimensions (H X W X D)
Approximately 17-7/8" x 20-1/2" x 18" (453mm x 520mm x 457mm) (imageRUNNER
1023iF/1023N)
Approximately 14-7/8" x 20-1/2" x 18" (378mm x 520mm x 457mm) (imageRUNNER
1023)
Installation Space (W x D)
(Including Optional Card
Reader)
Approximately 44 x 38-3/4" (984mm x 1,117mm)
Weight (Including Drum Unit,
Excluding Toner Cartridge)
iR 1023iF/1023N: Approximately 53.1 lbs. (24.1 kg)
With additional cassette: 64.56 lbs. (29.29 kg)
iR 1023: Approximately 48.5 lbs. (22 kg )
With additional cassette: 59.96 lbs. (27.18 kg)
Power Requirements 120V AC, 60 Hz, 5.1 A
DADF (Table 11)
DADF (Duplexing Automatic Document Feeder)
DADF ADF (Approximately 20 sheets/minute (LTR))
DADF Paper Capacity Up to 50 sheets (21 lb Bond (80 g/m2 paper)
DADF Paper Weight
13 to 34 lb Bond (50 to 128 g/m
2
) (One-Sided Scanning)
13 to 28 lb Bond (50 to 105 g/m
2
) (Two-Sided Scanning)
Cassette Feeding Module-N1 (Option) (Table 12)
Cassette Feeding Module-N1 (Optional Cassette)
Paper Feeding System Up to 500 Sheets x 1 Drawer (21 lb Bond (80 g/m
2
))
Paper Size Letter, Legal
Power Source From the main unit
Dimensions (H x W x D) Approximately 6-1/4" x 20-1/2" x 17-3/8" (158mm x 520mm x440 mm)
Weight Approximately 11.46 lbs. (5.2 kg)
Cassette-AD1 (Option) (Table 13)
Cassette-AD1 (Optional Replacement Cassette)
Paper Feeding System Up to 500 Sheets x 1 Drawer (21 lb Bond (80 g/m
2
))
Paper Size Letter, Legal
Dimensions (H x W x D) Approximately 3.76 x 19 x 16.31 (95.5mm x 485mm x 414.2mm)
Weight Approximately 3.3 lbs. (1.5 kg)
Card Reader-E1 (Option) (Table 14)
Card Reader-E1 (Optional)
Available Cards Magnetic, Optical
Card Reader Method Magnetic, Optical Readout
Magnetic Card Reading
Direction
Inserting Direction
Store/Replay Replay
Power Source From Main Unit
Dimensions (HxWxD) Approximately 1-1/4" x 3-1/2" x 4" (32mm x 88mm x 100mm)
Weight Approximately 5/8 lbs. (295 g)

Rev. 0 Page 21

B. Warranty
1. Main Unit Limited Warranty
CANON imageRUNNER 1019/1023 SERIES LIMITED WARRANTY
Canon U.S.A., Inc. and Canon Canada, Inc. (collectively "Canon") warrant the imageRUNNER 1019/1023 Series product
and Canon brand options designed for use with the imageRUNNER 1019/1023 Series product (collectively, the "Product") to
be free from defects in workmanship and materials under normal use and service for a period of 90 days after delivery to the
original purchaser (Purchaser) or 60,000 prints or copies (or a combination of both), whichever comes first. During such
warranty period, Canon shall replace, without charge, any defective part with a new or comparable rebuilt part. This
warranty shall not extend to consumables such as paper, chemicals, and toner as to which there shall be no warranty or
replacement. Warranty replacement shall not extend the original warranty period of the Product.
This warranty shall only apply if the Product is used in conjunction with compatible computers, peripheral equipment and
software. Canon shall have no responsibility for such items except for compatible Canon brand peripheral equipment
covered by a separate warranty (Separate Warranty). Repairs of such Canon brand peripheral equipment shall be
governed by the terms of the Separate Warranty. This warranty does not cover the Canon Drum Unit for the Product, for
which a separate warranty is given.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES AND CONDITIONS, EXPRESS OR IMPLIED, INCLUDING
ANY IMPLIED WARRANTIES AND CONDITIONS REGARDING MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, RELATING TO THE USE OR PERFORMANCE OF A PRODUCT. NO OTHER EXPRESS WARRANTY,
CONDITION OR GUARANTY, EXCEPT AS MENTIONED ABOVE, GIVEN BY ANY PERSON, FIRM OR CORPORATION
WITH RESPECT TO THE PRODUCT SHALL BIND CANON OR ANY AUTHORIZED SERVICE PROVIDER. NO
WARRANTY IS GIVEN ON ANY USED PRODUCT.
THIS WARRANTY SHALL BE VOID AND OF NO FORCE AND EFFECT IF THE PRODUCT IS DAMAGED AS A RESULT
OF (A) ABUSE, NEGLECT, MISHANDLING, ALTERATION, ELECTRIC CURRENT FLUCTUATION OR ACCIDENT, (B)
IMPROPER USE, INCLUDING FAILURE TO FOLLOW OPERATING OR MAINTENANCE INSTRUCTIONS IN, OR
ENVIRONMENTAL CONDITIONS PRESCRIBED IN, CANON'S OPERATOR'S MANUAL OR OTHER DOCUMENTATION,
(C) INSTALLATION OR REPAIR BY OTHER THAN AUTHORIZED SERVICE REPRESENTATIVES QUALIFIED BY
CANON WHO ARE ACTING IN ACCORDANCE WITH CANON'S SERVICE BULLETINS, (D) USE OF SUPPLIES OR
PARTS (OTHER THAN THOSE DISTRIBUTED BY CANON) WHICH DAMAGE THE PRODUCT OR CAUSE
ABNORMALLY FREQUENT SERVICE CALLS OR SERVICE PROBLEMS, OR (E) USE OF THE PRODUCT WITH NON-
COMPATIBLE COMPUTERS, PERIPHERAL EQUIPMENT OR SOFTWARE, INCLUDING THE USE OF THE PRODUCT
IN ANY SYSTEM CONFIGURATION NOT RECOMMENDED IN ANY MANUAL DISTRIBUTED WITH THE PRODUCT.
NOR DOES THIS WARRANTY EXTEND TO ANY PRODUCT ON WHICH THE ORIGINAL IDENTIFICATION MARKS OR
SERIAL NUMBERS HAVE BEEN DEFACED, REMOVED, OR ALTERED.
ANY SYSTEM SOFTWARE (WHETHER FACTORY LOADED ON THE PRODUCT OR CONTAINED ON THE SOFTWARE
DISKETTES OR CD-ROMS ENCLOSED WITH, OR ACCOMPANYING, THE PRODUCT), AND ANY UTILITY SOFTWARE,
DISTRIBUTED WITH OR FOR THE PRODUCT, IS SOLD "AS IS" AND WITHOUT WARRANTY BY CANON. THE SOLE
WARRANTY WITH RESPECT TO SUCH SOFTWARE IS CONTAINED IN THE SOFTWARE MANUFACTURER'S
LICENSE AGREEMENT DISTRIBUTED THEREWITH, INCLUDING ANY LIMITATIONS AND DISCLAIMERS THEREON.
PLEASE CONTACT CANON IMMEDIATELY IF YOU HAVE NOT RECEIVED A COPY OF THE SOFTWARE
MANUFACTURER'S LICENSE AGREEMENT.
NEITHER CANON NOR ANY AUTHORIZED SERVICE PROVIDER SHALL BE LIABLE FOR PERSONAL INJURY OR
PROPERTY DAMAGE (UNLESS CAUSED SOLELY AND DIRECTLY BY THE NEGLIGENCE OF CANON OR ANY
AUTHORIZED SERVICE PROVIDER), LOSS OF REVENUE OR PROFIT, FAILURE TO REALIZE SAVINGS OR OTHER
BENEFITS, EXPENDITURES FOR SUBSTITUTE EQUIPMENT OR SERVICES, LOSS OR CORRUPTION OF DATA,
STORAGE CHARGES OR OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE,
MISUSE OR INABILITY TO USE THE PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS
BASED AND EVEN IF CANON OR ANY AUTHORIZED SERVICE PROVIDER HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST CANON OR ANY AUTHORIZED
SERVICE PROVIDER BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT CAUSING THE
ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, THE PURCHASER ASSUMES ALL RISKS AND LIABILITY
FOR LOSS, DAMAGE OR INJURY TO PERSONS AND PROPERTY OF THE PURCHASER OR OTHERS ARISING OUT
OF THE POSSESSION, USE, MISUSE, OR INABILITY TO USE THE PRODUCT NOT CAUSED SOLELY AND DIRECTLY
BY THE NEGLIGENCE OF CANON OR ANY AUTHORIZED SERVICE PROVIDER. THIS WARRANTY SHALL NOT
EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THE PRODUCT AND STATES SUCH
PURCHASER'S EXCLUSIVE REMEDY.
CONDITIONS OF WARRANTY
Defective parts must be returned to Canon or an Authorized Service Provider with all necessary documentation and will
become the property of Canon.
THIS WARRANTY APPLIES TO PRODUCTS SOLD AND USED IN THE U.S.A. AND CANADA ONLY.

Canon U.S.A., Inc. One Canon Plaz Lake Success, New York 11042-1198 a
Canon Canada, Inc. 6390 Dixie Road Mississauga, Ontario L5T 1P7 Canada
Rev. 0 Page 22

2. GPR-22 Drum Unit Limited Warranty
CANON GPR-22 DRUM UNIT LIMITED WARRANTY
Canon U.S.A., Inc. and Canon Canada, Inc. (collectively "Canon") warrant the Drum Unit incorporated into the
imageRUNNER Series product (the "Product") packaged with this Limited Warranty (the "Drum Unit") to be free from defects
in workmanship and materials under normal use and service, other than exterior defects, such as nicks, scratches, or dents,
for a period of 30 days after delivery to the original purchaser of the Drum Unit or use of it to make 5,200 prints or copies (or
a combination of both), whichever comes first. If the Drum Unit proves to be defective within this warranty period, Canon
shall, at its sole option, replace it without charge.
Following the expiration of the 30 day warranty period, and continuing for a period of ONE YEAR after delivery to the
original purchaser of the Drum Unit or use of it to make 21,000 prints or copies (or a combination of both), whichever comes
first, Canon shall provide a credit ("Credit") to the original purchaser toward a replacement Drum Unit if the Drum Unit fails
to operate under normal use and service by reason of any defect in workmanship and materials, other than exterior defects,
such as nicks, scratches or dents. The Credit shall be a percentage of Canon's then current dealer price for the
replacement Drum Unit determined as set forth in the example below.
Warranty replacement shall not extend the original warranty period of the Drum Unit.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES AND CONDITIONS, EXPRESS OR IMPLIED, INCLUDING
ANY IMPLIED WARRANTIES AND CONDITIONS REGARDING MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, RELATING TO THE USE OR PERFORMANCE OF THE DRUM UNIT. NO OTHER EXPRESS WARRANTY,
CONDITION OR GUARANTY, EXCEPT AS MENTIONED ABOVE, GIVEN BY ANY PERSON, FIRM OR CORPORATION
WITH RESPECT TO THE DRUM UNIT SHALL BIND CANON OR ANY AUTHORIZED SERVICE PROVIDER. NO
WARRANTY IS GIVEN ON ANY USED DRUM UNIT.
This warranty shall be void and of no force and effect if the Drum Unit is damaged as a result of (a) abuse, neglect,
mishandling, or alteration of the Drum Unit, a Product Accessory or a Product in which the Drum Unit is incorporated,
electric current fluctuation, exposure to light, or accident, (b) improper use, including failure to follow operating or
maintenance instructions in, or environmental conditions prescribed in, Canon's operator's manual or other documentation,
(c) installation or repair by other than service representatives qualified by Canon who are acting in accordance with Canon's
service bulletins, or (d) use of supplies or parts (other than those distributed by Canon) which damage the Drum Unit or
cause abnormally frequent service calls or service problems. Nor does this warranty extend to any Drum Unit on which the
original identification marks or serial numbers have been defaced, removed, or altered.
NEITHER CANON NOR ANY AUTHORIZED SERVICE PROVIDER SHALL BE LIABLE FOR PERSONAL INJURY OR
PROPERTY DAMAGE (UNLESS CAUSED SOLELY AND DIRECTLY BY THE NEGLIGENCE OF CANON OR ANY
AUTHORIZED SERVICE PROVIDER), LOSS OF REVENUE OR PROFIT, FAILURE TO REALIZE SAVINGS OR OTHER
BENEFITS, EXPENDITURES FOR SUBSTITUTE EQUIPMENT OR SERVICES, LOSS OR CORRUPTION OF DATA,
STORAGE CHARGES OR OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE,
MISUSE OR INABILITY TO USE THE DRUM UNIT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS
BASED AND EVEN IF CANON OR ANY AUTHORIZED SERVICE PROVIDER HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST CANON OR ANY AUTHORIZED
SERVICE PROVIDER BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE DRUM UNIT CAUSING THE
ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, THE PURCHASER ASSUMES ALL RISKS AND LIABILITY
FOR LOSS, DAMAGE OR INJURY TO PERSONS AND PROPERTY OF THE PURCHASER OR OTHERS ARISING OUT
OF THE POSSESSION, USE, MISUSE, OR INABILITY TO USE ANY DRUM UNIT NOT CAUSED SOLELY AND
DIRECTLY BY THE NEGLIGENCE OF CANON OR ANY AUTHORIZED SERVICE PROVIDER. THIS WARRANTY SHALL
NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THE DRUM UNIT AND STATES SUCH
PURCHASER'S EXCLUSIVE REMEDY.

CONDITIONS OF WARRANTY
The defective Drum Unit must be returned to Canon, freight prepaid, in the original packaging with all necessary
documentation (machine log, a sample copy, warranty claim tag or other documents as required from time to time) to
receive the Credit or replacement Drum Unit.
Credits will be based on the then current dealer price for the replacement Drum Unit, and will be pro-rated based on the
copies made as indicated by the service report submitted by the Canon Authorized Service Representative.

EXAMPLE OF CREDIT
Drum Unit inoperative after 10,500 prints or copies (or a combination of both) in less than ONE YEAR of use.
Calculation of the Credit may be illustrated by the following example:
Calculation: 21,000 10,500 10,500
21,000
=
21,000
= 50% of the dealer price of the replacement Drum
THIS WARRANTY APPLIES TO DRUM S SOLD AND USED IN THE U.S.A. AND CANADA ONLY.

Canon U.S.A., Inc. One Canon Plaza Lake Success, New York 11042-1198
Canon Canada, Inc. 6390 Dixie Road Mississauga, Ontario L5T 1P7 Canada

Rev. 0 Page 23

C. List of Tables
imageRUNNER 1023 Series Comparison (Table 1) ...................................................................1
Configuration (Table 2)................................................................................................................3
imageRUNNER 1023 Series Box Contents (Table 3).................................................................4
Training Materials (Table 4) ........................................................................................................6
Power and Plug Requirements (Table 5) ....................................................................................8
Estimated Installation Times (Table 6) ........................................................................................9
Main Unit Consumables List (Table 7) ......................................................................................12
Service Tools List (Table 8).......................................................................................................12
Maximum Monthly Copy Volume / Optimum Performance (Table 9)........................................13
imageRUNNER 1023 Series Main Unit (Table 10) ...................................................................20
DADF (Table 11) .......................................................................................................................21
Cassette Feeding Module-N1 (Option) (Table 12) ....................................................................21
Cassette-AD1 (Option) (Table 13).............................................................................................21
Card Reader-E1 (Option) (Table 14).........................................................................................21

Rev. 0 Page 24

iR1023-Service Guide

Uploaded by

Copyright:

Available Formats

iR1023-Service Guide

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

iR1023-Service Guide

Uploaded by

Copyright:

Available Formats

Canon

You might also like