Electrocraft Legacy Catalog

ELECTROMATE
Toll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
This guide has been developed as a
quick reference tool for ElectroCraft
products. It is not intended to
replace technical documentation or
proper use of standards and codes
in installation of product.
Because of the variety of uses for
the products described in this
publication, those responsible for
the application and use of this
product must satisfy themselves
that all necessary steps have
been taken to ensure that each
application and use meets
all performance and safety
requirements, including all
applicable laws, regulations,
codes and standards.
Reproduction of the contents of this
copyrighted publication, in whole or
in part without written permission
of ElectroCraft is prohibited.
ELECTROMATE
www.electromate.com
Sold & Serviced By:
ElectroCraft Engineering Motor Solutions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
ElectroCraft G Series Motors
G240 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
G360 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
G640 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
G680 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
G700Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
G720 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
G Series Model Designations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
ElectroCraft R Series Motor Gearboxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
R Series Model Designations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
ElectroCraft T Series Transaxle Motors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
T Series Model Designations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
ElectroCraft Nx Series Gear Motors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Nx Series Model Designations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
ElectroCraft AC Motors Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
AC26 Motor Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
AC26 Motor Series Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
AC29 Motor Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
AC33 Motor Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
AC Series Model Designations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
ElectroCraft E Series Motors
E2200 Series Brushless Motors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
E Series Model Designations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
ElectroCraft Worldwide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Table of Contents
1
ELECTROMATE
www.electromate.com
Sold & Serviced By:
ElectroCraft G240 Series
The 240 series offers reliable performance in a small package for your low voltage, lower
torque range applications. This series utilizes mechanically aligned electromagnetics to
provide consistent speed in either rotation. The 240 series is one of
ElectroCrafts most widely used products worldwide.
Typical Applications
Printers
Tape Drives
Semiconductor Processing
Robotics
X-ray Equipment
Medical Pumps
Light Industrial
Features and Benefits
Dynamically balanced armatures
insure smooth performance at
any speed
Rugged TENV construction for
long life and reliability
Non-contact sealed ball bearings
for improved efficiency and
smooth operation
Replaceable brushes extend
product life cycle
2 Pole construction to support
high speed applications
Low ripple tachometer options
for speed regulation
G240 Series
E l e c t r o C r a f t G 2 4 0 S E R I E S
ELECTROMATE
www.electromate.com
Sold & Serviced By:
Motor Ratings 240 241 242 243
Continuous Stall Torque (Ncm) 20.5 26.8 35.3 38.8
Continuous Stall Torque (oz-in) 29 38 50 55
Peak Torque (Ncm) 169.5 197.7 247.2 282.5
Peak Torque (oz-in) 240 280 350 400
Maximum Terminal Voltage (V) 60 60 60 60
Maximum Operating Speed (rpm) 5000 5000 5000 5000
Mechancial Data
Rotor Inertia (kg cm^2) 0.268 0.353 0.438 0.565
Rotor Inertia (oz-in-sec^2) 0.0038 0.0050 0.0062 0.0080
Damping Constant (Ncm/krpm) 0.071 0.106 0.141 0.212
Damping Constant (oz-in/krpm) 0.10 0.15 0.20 0.30
Thermal Resistance (C/watt) 5.0 4.6 4.2 4.0
Maximum Armature Temperature ( C) 155 155 155 155
Maximum Friction Torque (Ncm) 2.1 2.1 2.1 2.1
Maximum Friction Torque (oz-in) 3 3 3 3
Maximum Radial Load
(25mm from bearing) (Kg) 4.5 4.5 4.5 4.5
Maximum Radial Load
(25mm from bearing) (lbs) 10 10 10 10
Weight (Kg) 1.0 1.0 1.0 1.0
Weight (lbs) 2.1 2.1 2.1 2.1
Electrical Data A B C A B C A B C A B C
Kt Torque Constant +-10% (Ncm/amp) 5.4 6.8 8.6 6.6 8.3 10.5 8.3 10.4 13.3 9.7 12.5 15.3
Kt Torque Constant +-10% (oz-in/amp) 7.7 9.6 12.2 9.3 11.7 14.9 11.7 14.7 18.8 13.8 17.7 21.6
Ke Voltage Constant +-10% (V/Krpm) 5.7 7.1 9.0 6.9 8.7 11.0 8.7 10.9 13.9 10.2 13.1 16.0
Terminal Resistance (ohms) 1.2 1.6 2.4 1.3 1.8 2.7 1.4 2 3 1.6 2.9 3.4
Maximum Continuous Current (A) 3.8 3.0 2.4 4.1 3.2 2.6 4.2 3.4 2.7 4.0 3.1 2.3
Maximum Peak Current (A) 31 24 19 30 24 19 31 24 19 34 26 21
Armature Inductance (mH) 1.9 3.0 4.8 2.6 4.1 6.5 3.3 5.2 8.3 4.1 6.8 10.3
Tachometer Electrical Data
Tachometer Specifications T1 T2 T3 T4
Ke Voltage Constant +-10% (V/Krpm) 3 7 14 21
Terminal Resistance (ohms) 550 600 720 950
Ripple Peak-to-Peak at 1000 rpm (%) 5 5 5 5
Increase Motor Inertia by: (kg cm^2) 0.099 0.099 0.099 0.099
Increase Motor Inertia by: (oz-in-sec^2) 0.0014 0.0014 0.0014 0.0014
G240 Series Performance Specifications
MOTOR ONLY OPTIONS SHOWN: ENGLISH MOUNTING, FLYING LEADS (19" STD)
MOTOR TACHOMETER OPTIONS SHOWN:
METRIC MOUNTING, PG GLAND LEAD LENGTH (701 (27.5") STD)
8h6 DIA 8h6 DIA
241T = 165.9 (6.53)
242T = 178.6 (7.03)
243T = 191.3 (7.53)
2.54
19.00 25.00
240T = 153 (6.03)
(2) 4-40 UNC-2B X 0.20 DP MIN
EQ SP ON 1.812 DIA
10
3.00
(4) 6-32 UNC-2B X 0.38 DP MIN
EQ SP ON 1.531 DIA
45
2.00 DIA.
2.50 DIA.
1.000 DIA.
0.70
0.2494
1.00
0.015 X 0.88 FLAT
241 = 4.5 (114.5)
242 = 5.0 (127.0)
243 = 5.5 (139.7)
0.10
240 = 4.0 (101.6)
0.2500
0.2495
(2) M3 X 0.5-6H X 0.20 [5 mm] DP MIN
(2) M2.5 X 0.45-6H X 0.20 [5 mm] DP MIN
EQ SP ON 1.812 DIA [ 46 mm]
10
15
76.2
35
(4) M4 X 0.7-6H X 0.38 [10 mm] DP MIN
EQ SP ON 1.531 DIA [ 38.89 mm]
24.97 DIA
57.5 DIA
50.8 DIA
45
Continuous Stall Torque (Ncm) 20.5 26.8 35.3 38.8
Peak Torque (Ncm) 169.5 197.7 247.2 282.5
Peak Torque (oz-in) 240 280 350 400
Mechancial Data
Maximum Radial Load
(25mm from bearing) (Kg) 4.5 4.5 4.5 4.5
Maximum Radial Load
(25mm from bearing) (lbs) 10 10 10 10
Weight (Kg) 1.0 1.0 1.0 1.0
Weight (lbs) 2.1 2.1 2.1 2.1
Kt Torque Constant +-10% (Ncm/amp) 5.4 6.8 13.5 6.6 8.3 10.5 8.3 10.4 13.3 9.7 12.5 15.3
Kt Torque Constant +-10% (oz-in/amp) 7.7 9.6 19.2 9.3 11.7 14.9 11.7 14.7 18.8 13.8 17.7 21.6
Ke Voltage Constant +-10% (V/Krpm) 5.7 7.1 14.2 6.9 8.7 11.0 8.7 10.9 13.9 10.2 13.1 16.0
Terminal Resistance (ohms) 1.2 1.6 5.4 1.3 1.8 2.7 1.4 2 3 1.6 2.9 3.4
Maximum Continuous Current (A) 3.8 3.0 1.9 4.1 3.2 2.6 4.2 3.4 2.7 4.0 3.1 2.3
Maximum Peak Current (A) 31 24 13.9 30 24 19 31 24 19 34 26 21
Armature Inductance (mH) 1.9 3.0 8.2 2.6 4.1 6.5 3.3 5.2 8.3 4.1 6.8 10.3
Tachometer Electrical Data - (optional)
Tachometer Specifications T1 T2 T3 T4
MOTOR TACHOMETER OPTIONS SHOWN:
METRIC MOUNTING, PG GLAND LEAD LENGTH (701 (27.5") STD)
8h6 DIA 8h6 DIA
241T = 165.9 (6.53)
242T = 178.6 (7.03)
243T = 191.3 (7.53)
2.54
19.00 25.00
240T = 153 (6.03)
(2) 4-40 UNC-2B X 0.20 DP MIN
EQ SP ON 1.812 DIA
10
3.00
(4) 6-32 UNC-2B X 0.38 DP MIN
EQ SP ON 1.531 DIA
45
2.00 DIA.
2.50 DIA.
1.000 DIA.
0.70
0.2494
1.00
0.015 X 0.88 FLAT
241 = 4.5 (114.5)
242 = 5.0 (127.0)
243 = 5.5 (139.7)
0.10
240 = 4.0 (101.6)
0.2500
0.2495
(2) M3 X 0.5-6H X 0.20 [5 mm] DP MIN
(2) M2.5 X 0.45-6H X 0.20 [5 mm] DP MIN
10
15
76.2
35
(4) M4 X 0.7-6H X 0.38 [10 mm] DP MIN
EQ SP ON 1.531 DIA [ 38.89 mm]
24.97 DIA
57.5 DIA
50.8 DIA
45
SPEED (RPM)
0
1000 2000 3000 4000 5000
40
80
120
160
200
240
280
320
INTERMITTENT
OPERATING REGION
.4
.8
1.2
1.6
CONTINUOUS OPERATING REGION
2.0
G240
TORQUE (Nm) TORQUE (OZ-IN)
5000
G241
0
1000 2000 3000 4000
SPEED (RPM)
40
80
120
160
200
240
280
320
INTERMITTENT
OPERATING REGION
.4
.8
1.2
1.6
2.0
0
1000 2000 3000 4000 5000
SPEED (RPM)
G242
50
100
150
200
250
300
350
400
.5
1.0
1.5
2.0
2.5
0
1000 2000 3000 4000 5000
SPEED (RPM)
G243
50
100
150
200
250
300
350
400
INTERMITTENT
OPERATING REGION
.5
1.0
1.5
2.0
2.5
INTERMITTENT
OPERATING REGION
3
ELECTROMATE
www.electromate.com
Sold & Serviced By:
The 360 series offers high performance in a small package for your low voltage, high
torque applications. This series utilizes high energy rare earth magnets to achieve high
torque to size ratios. When space is at a premium the 360 series is
the product for you.
XY Plotters
Printers
Robotics
Pick and Place Machines
Coordinate Measuring Devices
Medical Pumps
any speed
Rugged TENV construction for
long life and reliability
smooth operation
Replacable brushes extend
product life cycle
G360 Series
E l e c t r o C r a f t G 3 6 0 S e r i e s
ELECTROMATE
www.electromate.com
Sold & Serviced By:
Motor Ratings 362 364
Continuous Stall Torque (Ncm) 8.5 14.1
Continuous Stall Torque (oz-in) 12 20
Peak Torque (Ncm) 31.8 56.5
Peak Torque (oz-in) 45 80
Maximum Terminal Voltage (V) 30 30
Maximum Operating Speed (rpm) 5000 5000
Mechancial Data
Rotor Inertia (kg cm^2) 0.021 0.049
Rotor Inertia (oz-in-sec^2) 0.0003 0.0007
Damping Constant (Ncm/krpm) 0.141 0.141
Damping Constant (oz-in/krpm) 0.2 0.2
Thermal Resistance (C/watt) 7.8 7.5
Maximum Armature Temperature ( C) 155 155
Maximum Friction Torque (Ncm) 1.1 1.1
Maximum Friction Torque (oz-in) 1.5 1.6
Maximum Radial Load (25mm from bearing) (Kg) 2.3 2.3
Maximum Radial Load (25mm from bearing) (lbs) 5 5
Weight (Kg) 0.3 0.5
Weight (lbs) 0.7 1.1
Electrical Data A A
Kt Torque Constant +-10% (Ncm/amp) 4.73 5.65
Kt Torque Constant +-10% (oz-in/amp) 6.7 8.0
Ke Voltage Constant +-10% (V/Krpm) 4.9 5.9
Terminal Resistance (ohms) 3.5 3.2
Maximum Continuous Current (A) 1.8 1.8
Maximum Peak Current (A) 7 10
Armature Inductance (mH) 1.1 1.3Tachometer Electrical Data
Tachometer Specifications - (optional)
Ke Voltage Constant +-10% (V/Krpm) 3
Terminal Resistance (ohms) 42
Ripple Peak-to-Peak at 1000 rpm (%) 5
Increase Motor Inertia by: (kg cm^2) 0.007
Increase Motor Inertia by: (oz-in-sec^2) 0.0001
MOTOR ONLY OPTIONS SHOWN: METRIC MOUNTING, TERMINALS
MOTOR TACHOMETER OPTIONS SHOWN: METRIC MOUNTING, FLYING LEADS (70" STD)
(0.1966)
5h6
(0.1963)
DIA (0.1969)
(0.1965)
5h6
2.03
(0.08)
362 = 62.2 (2.45)
363 = 87.6 (3.45)
15.0
(0.59)
(0.70)
17.78
(2) M2 X 0.4-6H X 0.20 DP MIN
EQ SP ON 32.51(1.280) DIA
45
38.1 DIA
(1.50)
50.8
(2.00)
17.78
(0.07)
2.03
(0.08)
5h6 DIA
5h6 DIA
15.0
(0.59)
362T = 94.0 (3.70)
364T = 116.2 (4.60)
(0.1966)
(0.1963)
(0.1969)
(0.1965)
(2) M2 X 0.4-6H X0.20 DP MIN
EQ SP ON 32.51(1.280) DIA
45
50.8
(2.00)
38.1DIA
(1.50)
(4) M3 X 0.5-6H X 0.26 DP MIN
EQ SP ON 30.0 (1.181) DIA
45
20.0 DIA
(0.7874)
(4) M3 X 0.5-6H THRU
EQ SP ON 30.0 (1.181) DIA
45
20.0
(0.7874)
DIA
0
1000 2000 3000 4000 5000
SPEED (RPM)
G362
20
30
40
50
10
20
30
0
1000 2000 3000 4000 5000
SPEED (RPM)
G364
10
20
30
40
50
60
70
80
INTERMITTENT
OPERATING REGION
10
20
30
40
50
INTERMITTENT
OPERATING REGION
10
4
ELECTROMATE
www.electromate.com
Sold & Serviced By:
The 640 servo series offers smooth performance for your mid to low voltage,
mid-level torque applications. This series features four pole construction
for reduced torque ripple and optional sealed design for more
aggressive application environments.
Material Handling
CNC Tool Changers
Robotics
Medical Beds
Magnetic Resonance Instruments
Light Industrial
any speed
Rugged TENV and optional sealed
construction for reliability in most
environments
smooth operation
product life cycle
Low ripple tachometer options
for speed regulation
G640 Series
ELECTROMATE
www.electromate.com
Sold & Serviced By:
Motor Ratings 642 643 644
Continuous Stall Torque (Ncm) 70.6 116.5 148.3
Continuous Stall Torque (oz-in) 100 165 210
Peak Torque (Ncm) 339.0 547.3 678.0
Peak Torque (oz-in) 480 775 960
Maximum Terminal Voltage (V) 90 90 90
Maximum Operating Speed (rpm) 4500 4500 4500
Mechancial Data
Rotor Inertia (kg cm^2) 1.342 2.118 2.613
Rotor Inertia (oz-in-sec^2) 0.0190 0.0300 0.0370
Damping Constant (Ncm/krpm) 1.059 1.765 2.472
Damping Constant (oz-in/krpm) 1.50 2.50 3.50
Thermal Resistance (C/watt) 2.7 2.2 1.9
Maximum Armature Temperature ( C) 155 155 155
Maximum Friction Torque (Ncm) 5.6 5.6 5.6
Maximum Friction Torque (oz-in) 8 8 8
Maximum Radial Load (25mm from bearing) (Kg) 13.6 13.6 13.6
Maximum Radial Load (25mm from bearing) (lbs) 30 30 30
Weight (Kg) 3.6 4.8 5.4
Weight (lbs) 8 10.5 12
Electrical Data A B C A B C A B C
Kt Torque Constant +-10% (Ncm/amp) 8.3 10.5 16.7 11.8 15.1 23.7 12.0 15.4 30.9
Kt Torque Constant +-10% (oz-in/amp) 11.8 14.9 23.6 16.7 21.4 33.5 17.0 21.8 43.7
Ke Voltage Constant +-10% (V/Krpm) 8.7 11.0 17.5 12.4 15.9 24.8 12.6 16.2 32.4
Terminal Resistance (ohms) 0.5 0.7 1.5 0.5 0.7 1.5 0.4 0.5 1.7
Maximum Continuous Current (A) 8.5 6.7 4.2 9.9 7.7 4.9 12.3 9.6 4.8
Maximum Peak Current (A) 44 35 22 50 40 26 60 48 24
Armature Inductance (mH) 0.5 0.8 2.0 0.5 0.8 2.0 0.5 0.8 3.3
Tachometer Specifications (optonal) T1 T2 T3 T4
MOTOR TACHOMETER OPTIONS SHOWN: NEMA MOUNTING(42C), PG GLAND LEAD LENGTH (24" STD)
MOTOR TACHOMETER OPTIONS SHOWN: SQUARE MOUNTING, JUNCTION BOX, SEALED
MOTOR TACHOMETER OPTIONS SHOWN: METRIC MOUNTING, PG GLAND LEAD LENGTH (800 (31.5 STD)
4.00
2.78 3.20 DIA
3.25 DIA
B T&
.312 DIA THRU (4)
EQ SP ON A 4.03 DIA
OIL SEAL
45
3.50 SQ
1.500
DIA
1.497
(2) 4-40 UNC-2B X 0.38 DP MIN
EQ SP ON 1.812 DIA
80
2.88 DIA
0.4997
DIA
0.10
1.50
L
0.430
CONNECTOR: 1/2" CONDUIT
1/4" X 1/4" X 1.0" KEYWAY
643 = 144.8 (5.70)
644 = 170.2 (6.70)
30.00
8h6 DIA
19.00 7.62
12h6 DIA
642 = 105.2 (4.14)
(4) M6 X 1-6H X 7.62 MM DP MIN
EQ SP ON 63.5
0 2
83.1 DIA
77.98 DIA
(2) M2.5 X 0.45-6H X 12 MM DP MIN
EQ SP ON 46.0
(3) M4 X 0.7-6H X 8 MM DP MIN
EQ SP ON 72.0
1/4-20UNC-2B THRU
(4) EQ SP ON A 3.750 DIA
4.25 DIA
3.00 DIA
1.282
1/4" X 1/4" X 3/4" KEYWAY
0.5000
0.4997 DIA
0.70
0.12
0.41
0.4998 DIA
0.4995
3.25 DIA
642T = 6.23
643T = 7.79
644T = 8.79
1000 2000 3000 4000 5000
SPEED (RPM)
G642
1000 2000 3000 4000 5000
SPEED (RPM)
G643
INTERMITTENT
OPERATING REGION
0.1
0.2
0.3
0.4
0.5
0.5
1.0
1.5
2.0
2.5
3.0
INTERMITTENT
OPERATING REGION
0
1000 2000 3000 4000 5000
SPEED (RPM)
G644
160
320
480
640
800
960
0
100
200
300
400
500
600
0
160
320
480
640
800
INTERMITTENT
OPERATING REGION
1
2
3
4
6
5
7
ELECTROMATE
www.electromate.com
Sold & Serviced By:
The 680 series offers high output in a highly efficient package for mid to low voltage,
mid-level to high torque applications. This series combines the newest winding
technology with premium materials to provide an efficient product
significantly extending use cycles for remotely powered applications.
Electric Wheelchairs
Single Person Electric Vehicles
Pumps
Blowers
Medical Beds
Tape Transporters
Floor Care Equipment
any speed
Rugged TENV Construction for
reliability and long life
smooth operation
product life cycle
High efficiency to maximize
battery life
G680 Series
ELECTROMATE
www.electromate.com
Sold & Serviced By:
Continuous Stall Torque ( Nom) 63.6 84.7 130.6 141.2
Peak Torque (Ncm) 317.8 480.2 762.7 946.3
Peak Torque (oz-in) 450 680 1080 1340
Mechancial Data
Maximum Radial Load (25mm from bearing) (Kg) 13.6 13.6 13.6 13.6
Maximum Radial Load (25mm from bearing) (lbs) 30 30 30 30
Weight (Kg) 2.7 2.9 3.2 3.6
Weight (lbs) 6 6.5 7 8
Kt Torque Constant +-10%
(Ncm/amp) 6.6 10.0 13.3 6.1 10.4 13.7 6.1 6.6 13.1 6.6 10.5 13.1
Kt Torque Constant +-10%
(oz-in/amp) 9.4 14.1 18.9 8.7 14.7 19.5 8.8 9.4 13.5 9.3 14.9 18.6
Ke Voltage Constant +-10%
(V/Krpm) 7.0 10.5 14.0 6.4 10.8 14.4 6.5 7.0 13.7 6.9 11.0 13.8
Terminal Resistance
(ohms) 0.3 0.6 1 0.2 0.5 1.0 0.2 0.2 0.5 0.2 0.3 0.5
Maximum Continuous
Current (A) 10.0 7.0 5.5 10.0 9.0 2.3 12.0 10.0 4.6 12.0 10.0 8.0
Maximum
Peak Current (A) 50 35 25 55 50 15 80 80 65 80 80 70
Armature
Inductance (mH) 0.8 1.9 3.3 0.6 1.8 3.1 0.5 0.7 2.1 0.5 1.2 2.0
Tachometer Specifications (optional) T1 T2 T3 T4
MOTOR ONLY OPTIONS SHOWN: METRIC/ENGLISH MOUNTING, FLYING LEADS (457 (18") STD)
MOTOR TACHOMETER OPTIONS SHOWN: NEMA MOUNTING (34), PG GLAND LEAD LENGTH (25" STD)
(4) 0.22 DIA THRU
3.25 SQ
(2) 2.750
2.875 DIA
(2)M3 X 0.5-6H EQ SP
ON A 46.02 DIA - METRIC
(2) 4-40 UNC-2B X 0.25 EQ SP
ON A 1.812 DIA - ENGLISH
45
60
91.4
(3.60)
12.7
(0.4992)
(0.4997)
12.7
(0.5000)
(0.4995)
1/8 X 1/8 X 3/4
KEYWAY
30.0 (1.181)
17.78
(0.70)
1.57 (0.062)
681 = 131.3 (5.17)
683 = 146.6 (5.77)
685 = 175.0 (6.89)
689 = 195.3 (7.69)
1
0.450
0.063
1.19
0.4997 DIA
0.4994
0.70
0.3750 DIA
0.3745
681T = 7.37
683T = 7.97
685T = 9.00
689T = 9.89
(2) 4-40 UNC-2B X 0.25 DP
ON 1.812 DIA
30
15
3.60
2.88 DIA
M6 X 1-6H DP (4) EQ SP ON A
63.5 DIA - METRIC
10-32 UNF-28 X 0.50 DP (4)
EQ SP ON A 2.312 DIA - ENGLISH
40.0 DIA
(1.574)
82.55 DIA
(3.25)
45
1/8 X 1/8 X 3/4
KEYWAY
0
1000 2000 3000 4000 5000
SPEED (RPM)
1000 2000 3000 4000 5000
SPEED (RPM)
1000 2000 3000 4000 5000
SPEED (RPM)
1000 2000 3000 4000 5000
SPEED (RPM)
G681
200
300
400
500
600
G683
INTERMITTENT
OPERATING REGION
1
3
4
2
1
3
4
2
INTERMITTENT
OPERATING REGION
100
0
200
300
400
500
600
700
100
0
400
600
800
1000
1200
200
0
500
750
1000
1250
1500
250
G685
INTERMITTENT
OPERATING REGION
2
4
6
8
4
6
8
10
2
G689
INTERMITTENT
OPERATING REGION
9
ELECTROMATE
www.electromate.com
Sold & Serviced By:
The 700 series offers high output for low to mid voltages, high torque
applications. This series features robust four-pole construction and
premium materials to provide a reliable solution.
Electric Wheelchairs
Packaging Equipment
Medical Beds
Machine Tool
Robotics
any speed
Rugged TENV Construction for
reliability and long life
smooth operation
Replaceable brushes
extend product life cycle
Low ripple tachometer
options for speed regulation
G700 Series
ELECTROMATE
www.electromate.com
Sold & Serviced By:
Peak Torque (Ncm) 529.7 953.4 1412.4
Mechancial Data
Weight (Kg) 2.8 3.9 5.0
Weight (lbs) 6.1 8.5 11
Electrical Data A B A B A B
Kt Torque Constant +-10% (Ncm/amp) 14.2 23.0 6.9 33.3 11.3 37.4
Kt Torque Constant +-10% (oz-in/amp) 20.1 32.6 9.8 47.1 16.0 52.9
Ke Voltage Constant +-10% (V/Krpm) 14.9 24.1 7.2 43.4 11.8 49.3
Terminal Resistance (ohms) 0.7 1.6 0.2 1.4 0.2 1
Maximum Continuous Current (A) 7.5 4.6 13 6.4 13 7.7
Maximum Peak Current (A) 41 25 90 29 90 38
Armature Inductance (mH) 1.7 4.5 0.3 5.0 0.5 7.3
(2) 4-40 UNC-2B X 0.20 DP MIN
LOC AS SHOWN ON 1.812 DIA
(4) 10-32 UNF-2B X 0.40 DP MIN
EQ SP ON 3.250 DIA BC
MOTOR ONLY OPTIONS SHOWN: SQUARE MOUNTING, PG GLAND (24" STD)
0.10
3/16" X 3/16" X 1" KEYWAY
2.500
2.497 DIA
4.00 DIA
0.6245 DIA
0.150
2.00
0.4997 DIA
0.4994
0.70 2.00
0.6250 DIA
0.6245
3/16" x 3/16" x 1" KEYWAY
0.4997 DIA
0.4994
0.70
(4) 0.390 DIA THRU
4.00 SQ
3.000 DIA
2.997
1.70
3.40
1.70
701 = 4.6
702 = 5.6
703 = 6.6
701 = 4.9
702 = 5.9
703 = 6.9
(2)4-40 UNC X .20 MIN DP
180 APART ON 1.812 DIA
20
25
1
0
1000 500 1500 2000 2500 3000
SPEED (RPM)
G701
400
600
800
1000
G702
INTERMITTENT
OPERATING REGION
2
4
6
8
10
1
2
3
5
7
INTERMITTENT
OPERATING REGION
200
0
600
900
1200
1500
300
0
1000
1500
2000
2500
500
G703
INTERMITTENT
OPERATING REGION
20
30
40
50
20
30
40
50
4
6
1000 500 1500 2000 2500 3000
SPEED (RPM)
1000 500 1500 2000 2500 3000
SPEED (RPM)
11
ELECTROMATE
www.electromate.com
Sold & Serviced By:
The 720 servo series offers smooth performance for high voltage, high torque
applications. This series features premium construction and materials providing
smooth and highly accurate performance across the operating
speed range. If precision in motion is your goal this product
is the choice.
CNC Machine Tools
Packaging Equipment
Robotics
Light Industrial
insure smooth performance
at any speed
Rugged TENV Construction
and optional
sealed construction for reliability
in most environments
smooth operation
product life cycle
Low ripple tachometer
options for speed regulation
G720 Series
ELECTROMATE
www.electromate.com
Sold & Serviced By:
Peak Torque (Ncm) 1016.9 1468.9 2033.9
Mechancial Data
Weight (Kg) 5.9 6.8 9.5
Weight (lbs) 13 15 21
Electrical Data A B C A B C A B C
Kt Torque Constant +-10% (Ncm/amp) 15.0 19.6 30.1 20.0 32.1 40.0 19.7 28.1 33.6
Kt Torque Constant +-10% (oz-in/amp) 21.3 27.7 42.6 28.3 45.4 56.7 27.9 39.8 47.8
Ke Voltage Constant +-10% (V/Krpm) 15.8 20.5 31.6 21.0 33.6 42.0 20.7 29.5 35.4
Terminal Resistance (ohms) 0.4 0.6 1 0.4 0.8 1.1 0.4 0.5 0.7
Maximum Continuous Current (A) 16.5 12.8 8.3 16.0 10.0 8.0 20.0 14.0 13.0
Maximum Peak Current (A) 75 57 37 80 50 40 100 80 60
Armature Inductance (mH) 0.6 1.0 2.4 0.7 1.8 2.8 0.4 0.9 1.3
MOTOR TACHOMETER OPTIONS SHOWN: SQUARE MOUNTING, JUNCTION BOX, SEALED
ENGLISH MOUNTING
METRIC MOUNTING
0.6245
0.6250
DIA
0.15
2.00
M5 X 0.8-6H
40.00
15h6
B T &
2.78
4.02
4.00 SQ
(4) 0.390 DIA THRU
(4) 1/4-20 UNC-2B X 0.38 DP MIN
EQ SP ON 3.750 DIA BC
3.40
3.00 DIA
1.70
1/4-20 UNC-2B X 0.63 MIN DP
(4) EQ SP ON A 3.750 DIA
4.00 DIA
45
0.15
0.6245
0.6250
3/16" x 3/16" x 1"
KEYWAY
2.00
726 = 10.66
727 = 11.41
728 = 12.91
(4) M8 X 1.25-6H X 9.9 DP MIN
EQ SP ON 75.0
100.00
99.95
45
NEMA MOUNTING (56C)
3/8-16UNC-2B THRU (4)
EQ SP ON A 5.875 DIA
6.50 DIA
4.50 DIA
45
3/16" x 3/16" x 1"
KEYWAY
0
1000 2000 3000 4000
SPEED (RPM)
1000 2000 3000 4000
SPEED (RPM)
1000 2000 3000 4000
SPEED (RPM)
G726
640
1120
1440
G727
INTERMITTENT
OPERATING REGION
2
4
6
7
10
2
4
6
8
10
12
14
INTERMITTENT
OPERATING REGION
320
480
960
1280
160
0
1200
1680
2160
720
960
1440
1920
480
0
1280
1920
3560
640
960
1600
2240
320
G728
INTERMITTENT
OPERATING REGION
4
8
12
16
20
13
ELECTROMATE
www.electromate.com
Sold & Serviced By:
E l e c t r o C r a f t G S e r i e s Mo d e l N u mb e r I n f o r ma t i o n
ElectroCraft G Series
Model Designations
G685T AETSF1
Series- Brush Type Servo Motors
Frame Designator
24 = 240 (2.25 Diameter)
36 = 360 (1.50 Diameter)
64 = 640 (3.25 Diameter, 4-pole)
68 = 680 (3.25 Diameter, 2-pole)
70 = 700 (4.00 Diameter, under 90 VDC)
72 = 720 (4.00 Diameter, over 90 VDC)
Length Designator
0 9 see product pages
Tachometer Designator (omit if not applicable)
T = Tachometer
Winding Designator
A C, Z see product pages, Z= custom
Mounting Designator
E = English
M = Metric
N = Nema
Z = Custom
Lead Designator
F = Flying leads- see catalog if applicable
C = Standard connector- see catalog if applicable
T = Terminals on motor- see catalog if applicable
Z = Custom
Environmental Designator (omit if not applicable)
S= Sealed 640, 700 and 720 only
Z= Custom
Feedback Designator (omit if not applicable)
L = 500 line count
F = 1000 line count
H = 2000 line count
Z = custom
(standard offering: TTL logic with complements and
un-gated index)
Brake Designator (omit if not applicable)
1 = 12VDC
2 = 24 VDC
3 = 90 VDC
Z = custom
ELECTROMATE
www.electromate.com
Sold & Serviced By:
E l e c t r o C r a f t G S e r i e s Mo d e l N u mb e r I n f o r ma t i o n
15
G Series Model Designations
Please indicate any special features not covered in the model number:
ElectroCraft specializes in assisting you with an engineered solutions to meet your application needs. We also
specialize in sourcing and assembling value added components to your assembly. Please contact your area sales
representative (see world wide locations section) for assistance with your application needs.
Need a product fast?! ElectroCraft carries a limited supply of off-the-shelf model variations available for shipment
within 48 hours. Please contact your area sales representative or our inside sales staff for a complete listing of
stocked model numbers and pricing sheet.
Please explain any custom (Z) designators:
Series- Brush Type Servo Motors
Frame Designator
Length Designator
Tachometer Designator
(omit if not applicable)
Winding Designator
Mounting Designator
Lead Designator
Environmental Designator (omit if not applicable)
ELECTROMATE
www.electromate.com
Sold & Serviced By:
ElectroCraft R Series Motor Gearboxes
The R series products are designed for low voltage high torque applications typically
found in battery operated vehicle. Combine a precision two stage gearbox with one of
ElectroCraft's G series or E series motors to transfer power smoothly
and quietly to your drive wheels. The gearbox features all metallic
gearing hobbed to a precision AGMA 9 class to provide durable
performance while maintaining low noise level. With four ratios to
choose from and numerous motor combinations R series can meet
a broad range of performance needs.
Typical Application
Power Wheelchairs
Lift Trucks
Unmanned Ground Vehicles
Robots
Rotational Axes Drives
Personal Electric Vehicles
Single Person Golf Carts
Choice of output ratios to meet a
variety of different applications
Quiet transfer of power to the
drive wheels providing a
comfortable operating
environment
Highly efficient to extend
product range and capabilities
Robust all metallic gears
providing long durable life
Compatible with ElectroCraft
brush and brushless motors for
your application requirements
Available with industry standard
connectors for ease of drive
connection
Manual or non-manual release
brake options
Custom configurations available -
please contact your local sales
representative
R Series
Motor Gearboxes
E l e c t r o C r a f t R S e r i e s Mo t o r G e a r b o x e s
ELECTROMATE
www.electromate.com
Sold & Serviced By:
E l e c t r o C r a f t R S e r i e s Mo t o r G e a r b o x e s
Model R702-A15 R685-A19 R685-A21 R683-A28
Ratio 15.46:1 19.03:1 21.00:1 28.62:1
Maximum No Load Speed
1
(RPM) 3500 3500 3500 3500
Continuous Torque
2
(LB-IN) 80 80 80 80
Continuous Speed (RPM) 210 160 145 120
Peak Torque (LB-IN) 400 440 495 550
Backlash (Degrees) 1 1 1 1
Maximum OHL (Over Hung Load) 250 250 250 250
Length (IN) - Dimensions (L) 11.15 11.65 11.65 10.50
1. Input Speed 2. Measured with 12 x 12 x 0.5 Heat Sink
R Series Performance Specifications
17
HANDLE OPTION L
(LONG HANDLE)
HANDLE OPTION S
(SHORT HANDLE)
HANDLE OPTION N
(NO HANDLE)
1.62 REF
5.44 REF
(ALL LEAD OPTIONS 19.0")
RUBBER BOOT
BRAIDED SLEEVING
BRAIDED SLEEVING
60 REF
15
REF
30 REF
31 REF
C1 BRAKE SWITCH SAME CIRCUIT
CABLE
CLAMP
THIS
SIDE
PIN 4
(BLK HSG)
PIN 3
(RED HSG)
PIN 2
(WHT HSG)
PIN 1
(WHT HSG)
A
AA
A
CONNECTOR/HOUSING
TERMINAL MOTOR
TERMINAL BRAKE
ANDERSON 1460G1/1327
ANDERSON 261G1
ANDERSON 262G1
PIN 1
(RED)
PIN 2
(BLK)
PIN 3
(WHT)
PIN 4
(BRN)
CONNECTOR/HOUSING
TERMINAL MOTOR
TERMINAL BRAKE
INTECH MLD-PLG-PG4
AMP 962928-1
AMP 927827-2
SHAFT OPTION K (KEYWAY)
SHAFT
SHOULDER
-.000
+.040
M8 X 1.25-6H X 0.79
+.15-.00 DP.
(3) M6 X 1.00 X 22MM LG.
S.H.C.S. (REF)
M6 X 1.00-6H
TAPPED HOLES ( 3X )
(3) M6 X 1.00 X 30MM LG
S.H.C.S. (REF)
STANDARD COVER
0.2357
+.0004
-.0016
0.6677
+.0000
-.0005
DIA
1.808.022
2.055
3.90
1.765.050
0.090
1.600
1.000
+.012
-.002
DIA REF
2.796
1.750
4.174
2.087
0.875
0.531 DIA
SHAFT OPTION F (FLAT)
1/2-20 UNF-2A
0.030 R
MAX
-.03
+.00
FULL FLAT
0.830
+.000
-.001
DIA
0.600
+.002
-.002
2.00.06
1.75
2.10 REF
0.9840
+.0000
-.0005
DIA
0.50
1.000
+.012
-.002
DIA REF
4.10 REF
Handle Options
Lead Options
Shaft Options and Standard Cover
-.040
+.040
30 REF
0.039 REF
2.14 REF
0.845 REF
3.95 MAX
0.525
REF
1.000
+.012
-.002
DIA REF
0.13 REF
L
2.10 REF
2.50 DIA
R680 SERIES
R700 SERIES
L
0.039 REF
2.10 REF
0.525 REF
1.000
+.012
-.002
DIA REF
4.00 DIA
3.10 DIA
1.30
30 REF
30 REF
4.24 REF
2.14
ELECTROMATE
www.electromate.com
Sold & Serviced By:
E l e c t r o C r a f t R S e r i e s Mo d e l N u mb e r I n f o r ma t i o n
ElectroCraft R Series
Model Designations
R685 A15NSKF1
Length Designator
Series- Right Angle-Motor Drives
Frame Designator
68 = 680 (3.25 Diameter Brush Motor)
29 = 290 (3.35 Diameter Brushless Motor)
Winding Designator
A Z, see product pages
Ratio Designator
15 = 15.46:1
19 = 19.03:1
21 = 21:1
28 = 28.62:1
Z = custom
Disconnect Handle
L = Long
N = No Handle
S = Short
Z = Custom
Cover Mounting Pattern
S = Standard
Z = Custom
Output Shaft Designator
F = Standard Flat Configuration
K = Standard Keyway Configuration
R = Standard Round Configuration
Z = custom
Lead Designator
C = Standard connector- see catalog if applicable
Z = Custom
1 = 12VDC
2 = 24 VDC
3 = 90 VDC
Z = custom
ELECTROMATE
www.electromate.com
Sold & Serviced By:
E l e c t r o C r a f t R S e r i e s Mo d e l N u mb e r I n f o r ma t i o n
19
R Series Model Designations
Length Designator
Series- Right Angle-Motor Drives
Frame Designator
Winding Designator
Ratio Designator
Disconnect Handle
Cover Mounting Pattern
Lead Designator
ELECTROMATE
www.electromate.com
Sold & Serviced By:
ElectroCraft T Series
The T series products are the choice for your battery operated vehicle requiring a
differential axle. Combine a precision two stage transaxle with one of ElectroCraft's
G series or E series motors to transfer power to either of the drive
wheels. The transaxle features all metallic gearing hobbed to a
precision AGMA 9 class to provide durable performance while
maintaining a low noise level. With three ratios to choose from and
numerous motor combinations T series can meet your
performance needs.
Power scooters
Single person golf carts
Unmanned ground vehicles
Robots
Personal electric vehicles
Choice of output ratios to meet a
variety of different applications
Quiet transfer of power to the
drive wheels providing a
comfortable operating
environment
Highly efficient to extend
product range and capabilities
Robust all metallic gears
providing long durable life
Compatible with ElectroCraft
brush and brushless motors for
all your application requirements
Available with industry standard
connectors for ease of drive
connection
Custom configurations available -
please contact your local sales
representative
T Series Transaxle
Motors
E l e c t r o C r a f t T S e r i e s Tr a n s a x l e Mo t o r s
ELECTROMATE
www.electromate.com
Sold & Serviced By:
E l e c t r o C r a f t T S e r i e s Tr a n s a x l e Mo t o r s
Model T685-B20 T685-B22 T685-B26
Ratio 19.93:1 22.02:1 25.97:1
Maximum No Load Speed
1
(RPM) 3500 3500 3500
Continuous Torque
2
(LB-IN) 80 80 80
Continuous Speed (RPM) 160 145 120
Peak Torque (LB-IN) 440 540 550
Backlash (Degrees) 1 1 1
Maximum OHL (Over Hung Load) 250 250 250
Length (IN) - Dimensions (L) 8.28 8.28 8.28
1. Input Speed 2. Motor Limitation
T Series Performance Specifications
X 0.703.003
DIA (2X)
RETAINER RING PROVIDED (2)
1/2-20 UNF-2A
THREADS (2X)
1.00 DIA X 0.188 WIDTH
(BOTH ENDS)
-.010
+.005
KEY PROVIDED (2)
2.09.06
0.086
+.004
-.000
1.810
+.000
-.010
0.47 TYP
0.1870
.0005
1.00 DIA
0.17
0.080
0.331
1.070
5.63
6.44
0.625
1.00
1.45 SQ
(2X)
1.90
1.37
0.85
1.13
1.13
1.00
2.25 DIA
13.70.04
3.26
0.7500
+.0000
-.0010
DIA
2.394
0.794
0.078.003
0.996 REF
0.180
0.078 DIA
L
3.74
15
15.96
C2 BRAKE SWITCH SEPARATE CIRCUIT
CABLE
CLAMP
THIS
SIDE
CABLE
CLAMP
THIS
SIDE
PIN 3
(BRN HSG)
PIN 6
(BRN HSG)
PIN 5
(WHT HSG)
PIN 4
(BLK HSG)
PIN 2
(WHT HSG)
PIN 1
(RED HSG)
A
A
AA
A
A
PIN 4
(BLK HSG)
PIN 3
(RED HSG)
PIN 2
(WHT HSG)
PIN 1
(WHT HSG)
A
AA
A
CONNECTOR/HOUSING CONNECTOR/HOUSING
CONNECTOR/HOUSING
TERMINAL MOTOR TERMINAL MOTOR
TERMINAL MOTOR
TERMINAL BRAKE TERMINAL BRAKE
TERMINAL BRAKE
ANDERSON 1460G1/1327 ANDERSON 1460G2/1327
INTECH MLD-PLG-PG4
ANDERSON 261G1 ANDERSON 261G1
AMP 962928-1
ANDERSON 262G1 ANDERSON 262G1
AMP 927827-2
PIN 1
(RED)
PIN 2
(BLK)
PIN 3
(WHT)
PIN 4
(BRN)
21
ELECTROMATE
www.electromate.com
Sold & Serviced By:
E l e c t r o C r a f t T S e r i e s Mo d e l N u mb e r I n f o r ma t i o n
ElectroCraft T Series
Model Designations
T685 A19LF1
Length Designator
Frame Designator
Winding Designator
Ratio Designator
20 = 19.93:1
22 = 22.02:1
26 = 25.97:1
Z = Custom
L = Long shaft
S = Short shaft
Z = Custom
1 = 12 VDC
2 = 24 VDC
2 = Custom
Series- Transaxle-Motor Drives
Lead Designator
C = Standard connector
Z = Custom
ELECTROMATE
www.electromate.com
Sold & Serviced By:
E l e c t r o C r a f t T S e r i e s Mo d e l N u mb e r I n f o r ma t i o n
23
T Series Model Designations
Series-Transaxle-Motors Drives
Frame Designator
Length Designator
Winding Designator
Ratio Designator
Lead Designator
ELECTROMATE
www.electromate.com
Sold & Serviced By:
ElectroCraft Nx Series
The Nx Series products are a general purpose solution for your application needs.
Combined with ElectroCraft G series motors and offerred in small, medium and large
sizes. The small and medium versions feature five ratios offerring a
wide speed range to choose from. The large version offers three
ratios with excellent torque performance.
Servo X-Y-Z Axes
Robotics
Semi Conductor
General Purpose Applications
Material Handling
Flange mounted
All steel gears
Ball bearings
Precision die cast housing
Nx Series
Gear Motors
E l e c t r o C r a f t N x S e r i e s G e a r Mo t o r s
ELECTROMATE
www.electromate.com
Sold & Serviced By:
E l e c t r o C r a f t N x S e r i e s G e a r Mo t o r s
Model NS362T-A12 NS362T-A25 NS362T-A50 NS362T-A100 NS362T-180
Ratio 12.5:1 25:1 50:1 100:1 180:1
Mating Motor Series 360 360 360 360 360
Maximum Speed (RPM) 400 200 100 50 27
Maximum Torque (Lb-In) 3.5 6 12 15.5 15.5
Maximum OHL (Over Hung Load)(Lb) 20 20 20 20 20
Maximum Thrust Load (Lb) 15 15 15 15 15
Model NM240(2)T-A(B)6 NM240(2)T-A(B)12 NM240(2)T-A(B)50 NM240(2)T-A(B)100 NM240(2)T-A(B)180
Ratio 6:1 12.5:1 50:1 100:1 180:1
Mating Motor Series 240 240 240 240 240
Maximum Speed (RPM) 833 (500) 400 (240) 100 (60) 50 (30) 28 (16.6)
Maximum Torque (Lb-In) 6 (11) 12 (22) 43 (85) 78 (90) 90 (90)
Maximum OHL (Over Hung Load)(Lb) 25 25 25 25 25
Maximum Thrust Load (Lb) 15 15 15 15 15
Model NL683T-C12 NL683T-C25 NL683T-C50
Ratio 12.5:1 25:1 50:1
Mating Motor Series 680 680 680
Maximum Speed (RPM) 180 80 40
Maximum Torque (Lb-In) 40 80 125
Maximum OHL (Over Hung Load)(Lb) 20 20 20
Maximum Thrust Load (Lb) 15 15 15
Nx Series Performance Specifications
25
(2) 4-40 UNC X 0.20 DP MIN
EQ SP ON 1.812 DIA
3.15 SQ.
0.0938
0.0958 0.0469
0.98
DIA
0.3744
0.3750
0.322
0.318
2.325
1.260.030
10
3.05
2.25 DIA
0.70.03
8.361 (9.361)
0.2497
0.2494 DIA
(2) 2-56 UNC X 0.20 DP MIN
EQ SP ON 1.280 DIA
1.260.030
6-32 UNC
45
1.982 REF
1.50 DIA
0.71 DIA REF
0.974 SQ
1.948
0.3150
0.3144 DIA
0.47 FLAT
0.275 FLAT
2.36 SQ
1.18 SQ
0.39
5.02
0.20
1.26
0.70.03
0.1966
0.1963
DIA
30 REF
2.88 DIA
3.60
2-56UNC-2B X .20 MIN DP (4)
AS SHOWN ON A 1.812 DIA
4-40 UNC-2B X 0.20 MIN DP (2)
15
20
3/8-16 UNC-2B X 0.75 DP (4)
EQ SP ON A 5.51.03 DIA
1.008 0.992
0.094
0.187
+.003
-.000
4.77 SQ 11.17
3.65
0.70 .03 0.2497
0.2494
DIA
1.250 .030
0.20
0.98
0.644
0.640
0.7500
0.7494 DIA
2.000 DIA
20
NL MODEL
NS MODEL
NM MODEL
ELECTROMATE
www.electromate.com
Sold & Serviced By:
E l e c t r o C r a f t N x S e r i e s Mo d e l N u mb e r I n f o r ma t i o n
ElectroCraft Nx Series
Model Designations
Nx360T A12FL
Length Designator
Frame Designator
36 = 360 (1.50 Brush motor available with NS only)
24 = 240 (2.25 Brush motor available with NM only)
68 = 680 (3.25 Brush motor available with NL only)
T = Tachometer
Series- In-Line Gearbox
NS
NM
NL
Lead Designator
Z = Custom
Ratio Designator
6= 6:1
12= 12.5:1
50= 50:1
100= 100:1
180= 180:1
L = 500 line count
F = 1000 line count
H = 2000 line count
Z = custom
(standard offering: TTL logic with
complements
and un-gated index)
Winding Designator
ELECTROMATE
www.electromate.com
Sold & Serviced By:
E l e c t r o C r a f t N x S e r i e s Mo d e l N u mb e r I n f o r ma t i o n
27
Nx Series Model Designations
Length Designator
Frame Designator
Winding Designator
Series- In-Line Gearbox
Lead Designator
Ratio Designator
Feedback Designator
ELECTROMATE
www.electromate.com
Sold & Serviced By:
AC Motor Series
E l e c t r o C r a f t A C Mo t o r S e r i e s
ElectroCraft AC Motor Series
The AC product offers a wide choice of electrical types (see performance tables) with
standard or customized mounting arrangements. ElectroCraft motors are engineered for
versatility. Select from a wide range of head, shell and mounting
configurations, as well as speeds and electrical types. These features,
combined with our ability to produce output shafts with a variety of
flats, keyways, splines, tapers, threads or cross holes, fit a variety of
custom applications. ElectroCraft Engineered Solutions has a proven
record of performance in applications requiring precise speed and
torque control. Premium quality materials are used to offer top
performance, quiet running and long life. The AC product meets or
exceeds standards for materials, performance and safety established
by Underwriters Laboratories and Canadian Standards Association.
ELECTROMATE
www.electromate.com
Sold & Serviced By:
Motor Types HP Rating Full Load Speeds Starting Breakdown Starting Typical Characteristics
(@ 60Hz) Torque Torque Current
Permanent Split 1/50 to 1/3 3250 Very compact, easy to maintain. High efficiency, high power factor.
Capacitor (Type KP) 1/50 to 1/3 1625 Low Moderate Low Can operate at several speeds with simple control devices. Advantages:
Improved starting torque, quieter operation than split phase and provides
frequent start/stop capability essential in many applications. Disadvantage:
Performance is usually less satisfactory when starting. Changing the capacitor
value will affect both starting and running conditions, so that any improvements
in starting will usually result in a decrease in running performance.
Reluctance Synchronous Split
Capacitor (Type SKP) 1/50 to 1/6 1800 Low Moderate Low Same as Type KP, but used where constant speed is essential.
Capacitor Start (Type KL) 1/80 to 1/6 3450 Suitable for constant speed under varying load, high torques, high overload
1/50 to 1/6 1725 High High Moderate capacity. With the Type KP motor, a capacitor is added in series with the
start winding during the start mode to increase starting torque and/or reduce
starting current. The start winding and capacitor will be disconnected when
the motor has reached approximately 70% of running speed. Since the run
winding alone has no starting capability, both starting and running windings
are energized while starting.
Relunctance Synchronous 1/30 to 1/3 3600
Capacitor Start (Type SKL) 1/150 to 1/6 1800 High High Moderate Same as Type KL, but used where constant speed is essential.
Polyphase (or 3-Phase) (Type L) 1/30 to 1/3 3420 Generally suited to same applications as capacitor start motors if polyphase
1/75 to 1/3 1710 High High Moderate power is available. Reaches operating speed smoothly and quickly. Very
efficient design.
AC Motor Types
E l e c t r o C r a f t A C Mo t o r S e r i e s
Torque (oz-in Torque (oz-in
Torque (oz-in
Start
Torque
Full Load
Torque
Type KP
Permanent Split Capacitor
Start
Torque
Full Load
Torque
Type KL
Capacitor Start
Start
Torque
Full Load
Torque
Type L
Polyphase
29
(Capacitor) (Relay)
Line
Type KL, SKL
Red
Red
T1
Blue T2
Black
Green / Yellow
Red
(Capacitor)
Blue
Yellow
Black
Green / Yellow
Red
Blue
Yellow
Black
Green / Yellow
T3
L1
L2
Line
L3
Line
Type L, SL Type KP, SKP
ELECTROMATE
www.electromate.com
Sold & Serviced By:
Valve Actuators
Blowers
Pumps
Office Equipment/Business Machines
Medical Equipment
Hoists
Food Products Machinery
Options
Electrical: Class B insulation - UL and CSA Listed Class F
insulation - UL and CSA Listed Choice of lead material,
insulation thickness, gauge and length Choice of lead
combinations - tinned copper, spade, pin or lug terminals, plugs
Cord sets with or without plug ends or inline switches Oil
immersion insulation system Relay and capacitor supplied
(where necessary) 50/60 Hz combined rating Multiple
voltage ratings.
Mechanical: Capacitor or relay cover shell mounted Double shaft
extensions Special shaft configurations: Gear involutes, splines,
external and internal threads, keyways, multiple flats, ring grooves,
cross holes, screwdriver slots, multiple diameters, tapers Totally enclosed configurations
Weld studs Choice of shaft material.
AC26 Motor Series
E l e c t r o C r a f t A C 2 6 Mo t o r S e r i e s
Die cast aluminum rotor end rings and
bars with integral cooling
fans. Aluminum alloy selected to
match performance to job
requirements. Skewed rotor bars
promote uniform torque, quiet running.
Annealed laminations in stator and
rotor keep efficiency high for cooler
operation.
Stator windings scientifically
designed and computer matched to
customer's requirements to assume
maximum energy efficiency.
Rotors are dynamically balanced
to assure low vibration.
Die cast aluminum end caps with
precision machined fits assure
uniform air gap, firm bearing support
for quiet running, long life.
Double-shielded or sealed ball
bearings are greased for life with rust
inhibiting grease; no periodic service
needed.
Durable Class B or Class F insulation
system to meet UL and CSA standards.
Thermal protector available to guard
against accidental stalls or jams and
prevent burnout.
ELECTROMATE
www.electromate.com
Sold & Serviced By:
0.99
(25.1)
(4) BOSSES 0.3 DIA
#8-32 UNC-2B TAPPED
THRU ON A 2.625
(66,7) DIA. B.C.
0.31 MIN.THD.DEPTH
WITH CLEARANCE FOR
A 0.44 LONG SCREW
(4) BOSSES 0.3 DIA
#8-32 UNC-2B TAPPED
THRU ON A 2.625
(66.7) DIA. B.C.
0.31 MIN.THD.DEPTH
WITH CLEARANCE FOR
A 0.44 LONG SCREW
0.99
(25.1)
.22 X.31
5.6 X 7,9 SLOT (4X)
0.880.04
(22.41)
1.00.04
(25.41)
1.00.04
(25.41)
1.00.04
(25.41)
1.00.04
(25.41)
0.61
(15.5)
0.281
(7.1)
0.281
(7.1)
0.281
(7.1)
0.281
(7.1)
60
45 TYP
1.69.03
(42.9.8)
0.09
(2.3)
3.11
(79.0)
60
1.69.03
(42.9.8)
0.09
(2.3)
3.11
(79.0)
LENGTH
LENGTH
LENGTH
LENGTH
1.13
(28.7)
.22 X.31
5.6 X 7.9
SLOT (4X)
2.50
(63.5)
3.13
(79.5)
2.82
(71.6)
3.53
(89.7)
2.50
(63.5)
3.13
(79.5)
2.82
(71.6)
3.53
(89.7)
60
0.880.04
(22.41)
0.3215
(7.92)
3.215
(7.92)
0.3215
(7.92)
0.3125
(7.9)
0.880.04
(22.41)
0.61
(15.5)
.22 X.31
5.6 X 7.9
SLOT (4X)
2.50
(63.5)
3.13
(79.5)
45 TYP
3.11
(79.0)
2.82
(71.6)
3.53
(89.7)
LENGTH LENGTH
LENGTH LENGTH
INCHES
MM
INCHES
MM
INCHES
MM
INCHES
MM
0.05
1.30
0.05
0.05 0.05
1.30
1.30 1.30
B B
B B
3.62
91.9
2.56
3.48 2.95
65.0
88.4 75.0
3.87
98.3
2.81
3.73 3.20
C C
C C
71.4
94.8 81.3
D D
D D
4.12
104.6
3.06
3.98 3.45
77.7
101.1 87.7
E E
E E
4.37
111.0
3.31
4.23 3.70
84.1
107.5 94.0
F F
F F
4.62
117.3
3.56
4.48 3.95
90.4
113.8 100.4
G G
G G
4.87
123.7
3.81
4.73 4.20
96.8
120.2 106.7
H H
H H
5.12
130.0
4.06
4.98 4.45
130.1
126.5 113.1
J J
J J
K K
K K
115.8
139.2 125.8
5.62
142.7
4.56
5.48 4.95
5.37
136.4
4.31
5.23 4.70
109.5
132.9 119.4
1.69.03
(42.9.8)
0.09
(2.3)
RESILIENT HUB
AVAILABLE WITH OR WITHOUT RIGID BASE
4 BOSS MOUNT ON 2.625 BC WITH FLAT REAR END CAP
0.25 MAX
(6.4)
4 BOSS MOUNT ON 2.625 BC
0.25 MAX
(6.4)
#6-32 UNC-2B TAPPED THRU
ON A 2.781 (70,64) DIA.B.C.
0.20 MIN.THD.DEPTH WITH
CLEARANCE FOR A
0.22 MAX.LONG SCREW
60
45 TYP
1.69.03
(42.9.8)
0.09
(2.3)
3.11
(79.0)
.22 X.31
5.6 X 7.9
SLOT (4X)
2.50
(63.5)
3.13
(79.5)
2.82
(71.6)
3.53
(89.7)
0.880.04
(22.41)
FLAT HEAD WITH 2.781 (70,64) DIA B.C.
0.61
(15.5)
* 0.250-20 UNC-2B NOT AVAILABLE
INCHES
MM
0.05
1.30
BASE
3.88
98.6
4.13
104.9
4.38
111.3
4.63
117.6
4.88
124.0
5.13
130.3
5.38
136.7
60
3.11
(79.0)
0.090
(2.3)
2.25.03
(57.2.8)
0.56
(14.2)
(2X)
0.281 DIA THRU
(7.1) (4X) 1.25
(31.8)
2.50
(63.5)
0.54
(13.7)
3.310
(84.1)
.250-20 UNC 2B (2X)
2.40
(61.0)
2.40
(61.0)
BASE
0.3125
(7.92)
0.281
(7.1)
1.00.04
(25.41)
LENGTH
0.880.04
(22.41)
0.12
(3.1)
LENGTH
INCHES
MM
0.05
1.30
LENGTH
D*
4.12
104.6
4.37
E*
111.0
F
4.62
117.3
G
4.87
123.7
H
5.12
130.0
J
5.37
136.4
K
5.62
142.7
RESILENT BASE
AVAILABLE WITH OR WITHOUT RESILENT BASE
AND/OR CUSHION RINGS
41
ELECTROMATE
www.electromate.com
Sold & Serviced By:
E l e c t r o C r a f t A C 2 6 Mo t o r S e r i e s S p e c i f i c a t i o n s
Motor Poles Performance Length Voltage Frequency HP Rating Amps Watts Speed Torque Maximum Amps Torque Mfd. Vac
Types Designator Torque
KP 2 05 C 115 60 1/50 0.4 39 3385 6.0 13.0 0.8 4.6 3.0 236
KP 2 06 C 115 60 1/40 0.5 44 3300 7.7 15.0 0.9 4.2 3.0 236
KP 2 07 D 115 60 1/30 0.5 51 3370 10.0 18.0 1.2 5.5 3.0 236
KP 2 08 E 115 60 1/25 0.5 56 3380 12.0 23.0 1.4 6.7 4.0 236
KP 2 09 E 115 60 1/20 0.6 70 3370 15.1 27.0 1.7 8.2 5.0 236
KP 2 10 F 115 60 1/15 0.8 87 3390 20.0 35.1 2.5 10.3 5.0 218
KP 2 11 G 115 60 1/12 1.0 107 3390 25.1 49.0 2.9 13.6 6.0 236
KP 2 12 H 115 60 1/10 1.3 130 3360 30.3 60.0 3.7 17.6 6.0 236
KP 4 04 D 115 60 1/60 0.3 35 1620 10.5 19.0 0.6 10.0 3.0 236
KP 4 05 D 115 60 1/50 0.4 46 1630 12.5 24.0 0.6 17.4 4.0 236
KP 4 06 E 115 60 1/40 0.5 46 1625 15.4 29.0 0.9 14.0 4.0 236
KP 4 07 F 115 60 1/30 0.5 50 1670 20.7 37.9 1.1 18.8 4.0 236
KP 4 08 G 115 60 1/25 0.6 67 1625 25.1 47.0 1.3 24.0 5.0 236
KP 4 09 H 115 60 1/20 0.8 83 1630 31.2 60.0 1.7 30.0 6.0 236
KP 4 10 K 115 60 1/15 1.0 88 1660 40.0 78.0 2.5 31.2 6.0 236
KP 2 05 C 220 50 1/50 0.3 52 2700 7.5 12.0 0.4 4.0 3.0 220
KP 2 06 C 220 50 1/40 0.3 65 2555 9.8 12.8 0.5 3.5 3.0 220
KP 2 07 D 220 50 1/30 0.6 65 2710 12.4 18.0 0.6 4.8 3.0 220
KP 2 08 E 220 50 1/25 0.4 67 2765 14.7 24.0 0.8 6.1 4.0 220
KP 2 09 E 220 50 1/20 0.5 89 2720 18.8 27.0 0.9 7.0 5.0 220
KP 2 10 F 220 50 1/15 0.4 108 2740 25.0 38.0 1.3 9.0 5.0 220
KP 2 11 G 220 50 1/12 0.5 121 2780 30.1 51.0 1.5 12.0 1.5 440
KP 2 12 H 220 50 1/10 0.7 161 2785 37.0 62.0 1.9 15.0 1.5 440
KP 4 04 D 220 50 1/60 0.2 42 1250 13.2 18.0 0.3 8.6 3.0 370
KP 4 05 D 220 50 1/50 0.3 55 1230 16.1 21.5 0.4 10.0 3.0 370
KP 4 06 E 220 50 1/40 0.3 58 1260 19.8 28.0 0.5 12.0 3.0 370
KP 4 07 F 220 50 1/30 0.4 72 1255 26.1 35.0 0.6 16.0 4.0 370
KP 4 08 G 220 50 1/25 0.5 82 1270 31.4 47.0 0.7 20.0 5.0 440
KP 4 09 H 220 50 1/20 0.6 99 1280 37.5 57.0 0.9 25.0 1.5 370
KP 4 10 K 220 50 1/15 0.8 124 1275 50.0 74.0 1.2 29.0 1.5 370
All torque values are in ounce-inches. KP=Permanent Split Capacitor; KL=Capacitor Start; L=Polyphase. Other motor types not shown here: SKP=Synchronous Permanent Split Capacitor; SKL=Synchronous Capacitor Start
26 Frame AC Motor Series Performance Specifications
These 3.11 inch diameter motors are the smallest ElectroCraft Engineered Solutions offers and are designed for continuous duty in a
40C ambient temperature. At nominal 1650 or 3450 rpm, ratings range from 1/150 to 1/10 HP (contact your area sales representative
for intermittent ratings, higher ambient, or TENV construction). Motor specifications based on theoretical values for reference only.
Rated Load
Starting
Capacitor
ELECTROMATE
www.electromate.com
Sold & Serviced By:
KL 2 06 D 115 60 1/40 0.8 59 3425 7.4 15.0 2.5 19.0 36.0 110
KL 2 07 E 115 60 1/30 0.8 61 3435 9.7 21.0 2.9 25.0 43.0 110
KL 2 08 E 115 60 1/25 1.0 80 3425 11.9 24.0 3.5 30.0 43.0 110
KL 4 05 E 115 60 1/50 0.6 42 1695 11.9 19.5 2.0 24.0 43.0 125
KL 4 06 F 115 60 1/40 0.6 48 1685 15.0 21.5 2.2 30.0 47.0 125
KL 4 07 G 115 60 1/30 0.8 60 1690 19.9 29.5 2.6 41.0 53.0 125
KL 4 08 H 115 60 1/25 0.9 68 1695 23.8 37.5 3.0 51.0 64.0 125
KL 4 09 J 115 60 1/20 1.1 87 1685 29.9 43.5 3.6 61.0 72.0 125
KL 2 06 D 220 50 1/40 0.5 83 2800 8.9 16.0 1.8 28.0 21.0 165
KL 2 07 E 220 50 1/30 0.5 78 2830 11.7 23.0 2.0 39.0 21.0 165
KL 2 08 E 220 50 1/25 0.7 109 2810 14.3 25.0 2.1 36.0 21.0 165
KL 2 09 F 220 50 1/20 0.7 107 2830 17.8 35.0 2.4 49.0 21.0 165
KL 2 10 G 220 50 1/15 0.9 143 2825 23.4 41.0 2.7 53.0 21.0 165
KL 2 11 H 220 50 1/12 1.1 161 2830 29.6 55.0 3.2 61.0 21.0 165
KL 2 12 J 220 50 1/10 1.2 185 2820 35.6 60.0 3.4 75.0 30.0 220
KL 4 05 E 220 50 1/50 0.4 64 1345 15.0 20.0 0.9 16.0 43.0 110
KL 4 06 F 220 50 1/40 0.4 68 1345 18.5 23.0 1.0 19.0 47.0 110
KL 4 07 G 220 50 1/30 0.6 85 1350 24.0 32.0 1.3 30.0 53.0 110
KL 4 08 H 220 50 1/25 0.6 92 1370 29.0 42.0 1.7 62.0 21.0 220
KL 4 09 J 220 50 1/20 0.8 122 1350 36.6 47.0 1.8 64.0 21.0 220
L 4 06 E 230 60 1/40 0.2 34 1715 15.0 45.6 0.5 35.5 - -
L 4 07 G 230 60 1/30 0.3 46 1735 20.0 84.6 1.0 72.2 - -
L 4 12 K 230 60 1/10 0.4 120 1650 60.8 140.0 0.9 120.0 - -
L 4 13 L 230 60 1/8 0.5 142 1670 74.0 170.0 1.7 137.0 - -
33
Rated Load
Starting
Capacitor
These 3.11 inch diameter motors are the smallest ElectroCraft Engineered Solutions offers and are designed for continuous duty in a
40C ambient temperature. At nominal 1650 or 3450 rpm, ratings range from 1/150 to 1/10 HP (contact your area sales representative
for intermittent ratings, higher ambient, or TENV construction). Motor specifications based on theoretical values for reference only.
ELECTROMATE
www.electromate.com
Sold & Serviced By:
Valve Actuators
Blowers
Pumps
Medical Equipment
Hoists
Options
insulation - UL and CSA Listed Choice of lead material, insulation
thickness, gauge and length Choice of lead combinations - tinned
copper, spade, pin or lug terminals, plugs Cord sets with or without
plug ends or inline switches Oil immersion insulation system
Relay and capacitor supplied (where necessary) 50/60 Hz
combined rating Multiple voltage ratings.
external and internal threads, keyways, multiple flats, ring grooves, cross holes,
screwdriver slots, multiple diameters, tapers Totally enclosed configurations
Weld studs Choice of shaft material.
AC29 Motor Series
bars with integral cooling fans. Aluminum
alloy selected to match performance to
job requirements. Skewed rotor bars
Annealed laminations in stator and rotor
keep efficiency high for cooler operation.
Stator windings scientifically designed
and computer matched to customer's
requirements to assume maximum
energy efficiency.
needed.
prevent burnout.
ELECTROMATE
www.electromate.com
Sold & Serviced By:
3.42
(86.9)
3.42
(86.9)
HOLES ON 2.844 (72.2)
DIA B.C.
STUDS ON 2.844 (72.2)
DIA B.C.
(4) #8-32 UNF-2B
(4) #8-32 UNF-2A
45
45
LENGTH
LENGTH
3.25.01
(82.50.3)
3.25.01
(82.50.3)
2.38
(60.3)
2.38
(60.3)
0.281 X 0.69
(7.1 X 17.5)
(4 SLOTS)
0.281 X 0.69
(7.1 X 17.5)
(4 SLOTS)
3/8" THRU 3/4"
(9.52 THRU 19.05)
AVAILABLE, LUG MOUNT
ALSO AVAILABLE
0.09
(2.3)
0.09
(2.3)
2.25.03
(57.10.8)
2.25.03
(57.10.8)
2.88.01
(73.10.3)
2.88.01
(73.10.3)
3.81.01
(96.80.3)
3.81.01
(96.80.3)
P
P
5.603
5.603
142.3
142.3
N
N
5.353
5.353
136.0
136.0
M
M
5.103
5.103
129.6
129.6
L
L
4.853
4.853
123.3
123.3
K
K
4.603
4.603
116.9
116.9
INCHES
INCHES
MM
MM
LENGTH
LENGTH
0.05
0.05
1.30
1.30
C
C
2.853
2.853
72.5
72.5
3.103
3.103
D
D
78.8
78.8
E
E
3.353
3.353
85.2
85.2
F
F
3.603
3.603
91.5
91.5
G
G
3.853
3.853
97.9
97.9
H
H
4.103
4.103
104.2
104.2
J
J
4.353
4.353
110.6
110.6
FLAT HEADS BOTH ENDS
4 STUD, FACE MOUNT
1.500.04
(38.11)
1.500.04
(38.11)
0.3125
(7.9)
0.3125
(7.9)
0.281
(7.1)
0.281
(7.1)
0.880.04
(22.41)
0.880.04
(22.41)
35
ELECTROMATE
www.electromate.com
Sold & Serviced By:
These 3.42 inch diameter motors are designed for continuous duty in a 40C ambient temperature. At nominal 1650 or 3450 rpm, ratings range
from 1/60 to 1/4 HP (contact your area sales representative for intermittent ratings, higher ambient, or TENV construction). Motor specifications
based on theoretical values for reference only.
Rated Load
Starting
Capacitor
KP 2 09 E 115 60 1/20 0.9 92 3400 15.0 30 2.0 11.0 5.0 330
KP 2 10 F 115 60 1/15 1.0 111 3440 20.0 35 2.2 12.0 6.0 330
KP 2 12 G 115 60 1/10 1.3 143 3430 29.0 56 3.5 17.0 7.5 330
KP 2 13 H 115 60 1/8 1.8 173 3445 37.0 75 5.2 18.0 7.5 330
KP 2 14 J 115 60 1/6 1.9 215 3450 49.0 104 6.5 29.0 10.0 330
KP 2 15 K 115 60 1/5 2.1 236 3435 60.0 115 7.2 30.0 15.0 330
KP 2 16 L 115 60 1/4 2.3 266 3420 74.0 147 9.0 36.0 15.0 330
KP 4 08 F 115 60 1/25 0.9 82 1630 24.0 40 1.5 26.0 4.0 330
KP 4 09 H 115 60 1/20 1.0 90 1670 29.0 72 2.3 32.0 6.0 330
KP 4 10 J 115 60 1/15 1.3 117 1680 39.0 79 2.7 32.0 7.5 330
KP 4 11 K 115 60 1/12 1.3 127 1675 49.0 100 3.1 44.0 10.0 330
KP 4 12 M 115 60 1/10 1.3 133 1650 60.0 121 3.1 61.0 12.0 330
KP 4 13 P 115 60 1/8 1.4 157 1655 76.0 156 3.9 71.0 15.0 330
KP 2 09 E 220 50 1/20 0.8 87 2730 17.8 27 1.4 13.0 7.0 250
KP 2 10 F 220 50 1/15 0.8 96 2765 23.8 38 1.8 16.0 9.0 250
KP 2 12 G 220 50 1/10 1.2 128 2765 35.2 56 2.8 20.0 9.0 250
KP 2 13 H 220 50 1/8 1.5 166 2810 43.8 80 4.1 26.0 10.0 250
KP 2 14 J 220 50 1/6 1.8 204 2800 58.8 106 5.2 35.0 15.0 250
KP 2 15 K 220 50 1/5 2.2 235 2805 70.8 140 6.9 40.0 17.5 250
KP 2 16 M 220 50 1/4 2.4 270 2790 90.0 154 7.3 47.0 20.0 280
KP 4 08 F 220 50 1/25 0.5 55 1220 28.2 36 0.8 24.0 6.0 220
KP 4 09 H 220 50 1/20 0.6 78 1325 34.8 59 1.2 36.0 8.0 220
KP 4 10 J 220 50 1/15 0.8 93 1315 46.8 76 1.6 42.0 10.0 220
KP 4 11 K 220 50 1/12 1.0 90 1310 58.8 93 1.9 52.0 12.0 220
KP 4 12 M 220 50 1/10 1.1 120 1330 72.0 122 2.5 68.0 12.5 220
KP 4 13 P 220 50 1/8 1.5 145 1290 105.6 151 3.1 79.0 15.0 220
ELECTROMATE
www.electromate.com
Sold & Serviced By:
37
Rated Load
Starting
Capacitor
KL 2 08 F 115 60 1/25 1.1 80 3440 12.0 30 3.1 24.0 36.0 110
KL 2 10 G 115 60 1/15 1.7 124 3450 20.0 49 5.0 40.0 36.0 110
KL 2 11 H 115 60 1/12 1.8 126 3445 25.0 61 5.6 49.0 43.0 110
KL 2 13 K 115 60 1/8 2.3 172 3460 37.0 101 8.6 74.0 53.0 110
KL 2 14 M 115 60 1/6 2.8 218 3490 50.0 127 11.0 98.0 53.0 110
KL 2 15 N 115 60 1/5 3.0 247 3465 60.0 141 11.7 117.0 75.0 110
KL 2 16 P 115 60 1/4 3.6 296 3460 74.0 168 13.7 126.0 75.0 110
KL 4 06 G 115 60 1/40 1.4 93 1670 15.0 40 2.4 33.0 36.0 110
KL 4 07 H 115 60 1/30 1.4 91 1680 20.0 52 2.7 42.0 36.0 110
KL 4 08 J 115 60 1/25 1.5 98 1680 24.0 59 3.0 52.0 36.0 110
KL 4 09 K 115 60 1/20 1.8 115 1685 31.0 76 3.6 66.0 43.0 110
KL 4 11 M 115 60 1/12 2.1 149 1675 51.0 98 4.7 108.0 43.0 110
KL 2 08 F 220 50 1/25 1.1 81 2810 14.4 29 2.8 29.0 36.0 120
KL 2 10 G 220 50 1/15 1.5 121 2795 24.0 42 3.6 42.0 36.0 120
KL 2 11 H 220 50 1/12 1.5 128 2790 30.0 50 4.0 42.0 36.0 120
KL 2 13 K 220 50 1/8 2.0 175 2800 44.4 76 6.0 70.0 36.0 120
KL 2 14 M 220 50 1/6 2.5 216 2795 60.0 103 7.6 87.0 43.0 120
KL 2 15 N 220 50 1/5 2.7 255 2750 72.0 106 8.0 105.0 47.0 120
KL 2 16 P 220 50 1/4 3.2 295 2755 87.6 134 9.6 122.0 53.0 120
KL 4 06 G 220 50 1/40 1.0 78 1310 18.6 29 2.2 52.0 36.0 120
KL 4 07 H 220 50 1/30 1.2 93 1330 24.0 40 2.7 62.0 36.0 120
KL 4 08 J 220 50 1/25 1.2 90 1330 29.4 47 2.7 69.0 36.0 120
KL 4 09 K 220 50 1/20 1.7 120 1340 37.2 65 3.4 83.0 36.0 120
KL 4 11 M 220 50 1/12 1.7 145 1260 61.0 73 3.4 101.0 36.0 120
L 2 12 G 230 60 1/10 0.4 111 3420 29.0 110 2.2 116.0 - -
L 2 13 H 230 60 1/8 0.5 131 3420 37.0 146 2.9 160.0 - -
L 2 14 J 230 60 1/6 0.6 174 3420 49.0 191 3.8 200.0 - -
L 2 15 K 230 60 1/5 0.8 204 3420 59.0 258 4.9 290.0 - -
L 2 16 L 230 60 1/4 0.9 250 3420 74.0 314 5.9 356.0 - -
L 2 17 M 230 60 1/3 1.3 340 3420 98.0 416 8.0 475.0 - -
L 4 08 G 230 60 1/25 0.5 81 1710 23.5 164 1.5 190.0 - -
L 4 09 H 230 60 1/20 0.6 89 1710 30.0 197 1.8 227.0 - -
L 4 10 J 230 60 1/15 0.8 114 1710 39.0 272 2.4 312.0 - -
L 4 11 K 230 60 1/12 0.9 132 1705 49.0 322 2.8 368.0 - -
L 4 12 M 230 60 1/10 0.9 142 1705 59.0 347 3.1 395.0 - -
L 4 13 P 230 60 1/8 1.1 173 1700 73.0 445 3.8 510.0 - -
ELECTROMATE
www.electromate.com
Sold & Serviced By:
Valve Actuators
Blowers
Pumps
Medical Equipment
Hoists
Options
insulation - UL and CSA Listed Choice of lead material, insulation
thickness, gauge and length Choice of lead combinations - tinned
copper, spade, pin or lug terminals, plugs Cord sets with or without
plug ends or inline switches Oil immersion insulation system
Relay and capacitor supplied (where necessary) 50/60 Hz
combined rating Multiple voltage ratings.
external and internal threads, keyways, multiple flats, ring grooves, cross holes,
screwdriver slots, multiple diameters, tapers Totally enclosed or totally enclosed fan
cooled configurations Weld studs Choice of shaft material.
AC33 Motor Series
bars with integral cooling fans. Aluminum
alloy selected to match performance to
job requirements. Skewed rotor bars
Annealed laminations in stator and rotor
keep efficiency high for cooler operation.
Stator windings scientifically designed
and computer matched to customer's
requirements to assume maximum
energy efficiency.
needed.
prevent burnout.
ELECTROMATE
www.electromate.com
Sold & Serviced By:
INCHES
LENGTH
BASE
MM
0.05
1.30
4.04
102.6
4.29
109.0
4.54
115.3
4.79
121.7
5.04
128.0
5.29
134.4
5.54
140.7
6.29
159.8 153.4
6.04 5.79
147.1
BASE
.250-20 UNC 2B (2X)
0.12
(3.1)
1.00
(25.4)
0.54
(13.7)
3.310
(84.1)
2.40
(61.0)
RESILIENT BASE
AVAILABLE WITH OR WITHOUT RESILIENT BASE
AND/OR CUSHION RINGS
(4) 0.281
DIA THRU
2.50
(63.5)
1.25
(31.8)
LENGTH
INCHES
MM
0.05
1.30
E
4.30
109.2
4.55
F
115.6
G
4.80
121.9
H
5.05
128.3
J
5.30
134.6
K
5.55
141.0
L
5.80
147.3
M N P
6.55
166.4 160.0
6.30 6.05
153.7
(2) 0.56
(14.2)
60 78
0.090
(2.3)
2.25.03
(57.2.8)
-.00
+.13
(31.7
3.57
(90.7)
2.81
(71.4)
1.34
(34.0)
1.750
(44.5)
3.86
(98.0)
3.86
(98.0)
0.875
(22.2)
(4) 10-32 UNF-2B X
0.50 MIN FULL THREAD
+.000
-.005
1.00.04
(25.41)
1.00.04
(25.41)
0.880.04
(22.41)
0.880.04
(22.41)
0.281
(7.1)
0.281
(7.1)
0.3125
(7.9)
0.3125
(7.9) 1.246
DIA
0.12
(3.0)
LENGTH
LENGTH
60 78
2.02.03
(51.3.8)
0.105
(2.7)
1.67
(42.4)
3.34
(84.8)
4.17
(105.9)
(4) 0.44 X 0.28 SLOTS
(11.2 X 7.1)
(2) 1.00
(25.4)
1.750
(44.5)
0.875
(22.2)
LENGTH
INCHES
MM
0.05
1.30
E
4.49
114.0
4.74
F
120.4
G
4.99
126.7
H
5.24
133.1
J
5.49
139.4
K
5.74
145.8
L
5.99
152.1
M N P
6.74
171.2 164.8
6.49 6.24
158.5
(4) 0.44 X 0.28
SLOTS (11.27.1)
1.67
(42.4)
3.34
(84.8) 4.17
(105.9)
8-32 UNC-2B
THRU (4)
EQ SP ON A
2.844
DIA BC (72.2)
0.38 MAX
(9.7)
0.105
(2.7)
3.34
(90.7) 4.17
(105.9)
1.67
(42.4)
(4) 0.44 X 0.28
SLOTS (11.2 X 7.1)
(2) 1.00
(25.4)
1.79 DIA REF
(45.5)
(11.2 X 7.1)
(4) BOSSES 0.37 DIA
8-32 UNC-2B TAPPED THRU
ON A 2.844 (72,2) DIA BC
0.27 MIN THD DEPTH
WITH CLEARANCE FOR A
0.38 LONG SCREW 60
90
18
4.17
(105.9)
3.34
(84.8)
1.67
(42.4)
2.02.03
(51.3.8)
1.12
(28.5)
2.81
(71.4)
0.33
(18.4)
2.02.03
(51.3.8)
(2) 1.00
(25.4)
(4) 0.44 X 0.28 SLOTS
(11.2 X 7.1)
0.105
(2.7)
3.34
(90.7)
4.17
(105.9)
1.67
(42.4)
1.12
(28.5)
LENGTH
INCHES
MM
0.05
1.30
E
4.13
104.9
4.38
F
111.3
G
4.63
117.6
H
4.88
124.0
J
5.13
130.3
K
5.38
136.7
L
5.63
143.0
M N P
6.38
162.1 155.7
6.13 5.88
149.4
LENGTH
INCHES
MM
0.05
1.30
E
4.30
3.57
(90.7)
109.2
4.55
F
115.6
G
4.80
121.9
H
5.05
128.1
J
5.30
134.6
K
5.55
141.0
L
5.80
147.3
M N P
6.55
166.4 160.0
6.30 6.05
153.7
FLAT HEAD
4 BOSS MOUNT ON 2.844 BC (2.625 THRU 3.125)
78
3.57
(90.7)
2.81
(71.4)
60
0.105
(2.7)
2.02.03
(51.3.8)
(2) 1.00
(25.4)
90
18
78
60
90
18
2.02.03
(51.3.8)
1.14
2.81
(71.4)
3.57
(90.7)
(29.0)
(4) 8-32 UNC-2B TAP
ON A 2.844
(72.2) DIA B.C.
0.37
(8.6)
RESILIENT HUB
LENGTH
LENGTH
LENGTH
LENGTH
1.00.04
(25.41)
1.00.04
(25.41)
1.00.04
(25.41)
1.00.04
(25.41)
0.880.04
(22.41)
0.880.04
(22.41)
0.880.04
(22.41)
0.880.04
(22.41)
0.281
(7.1)
0.281
(7.1)
0.281
(7.1)
0.281
(7.1)
0.3125
(7.9)
0.3125
(7.9)
0.3125
(7.9)
0.3125
(7.9)
78
3.89
(98.0)
(98.0)
3.89
(98.0)
3.89
3.89
(98.0)
78
60
2.81
(71.4)
3.57
(90.7)
1.25 DIA
(31.8)
(2) 1.00
(25.4)
0.105
(2.7)
(4) 0.44 X 0.28 SLOTS
LENGTH
INCHES
MM
0.05
1.30
E
3.77
95.8
4.02
F
102.1
G
4.27
108.5
H
4.52
114.8
J
4.77
121.2
K
5.02
127.5
L
5.27
133.9
M N P
6.02
152.9 146.6
5.77 5.52
140.2
LENGTH
INCHES
MM
0.05
1.30
E
4.01
101.9
4.26
F
108.2
G
4.51
114.6
H
4.76
120.9
J
5.01
127.3
K
5.26
133.6
L
5.51
140.0
M N P
6.26
159.0 152.7
6.01 5.76
146.3
39
0.25 MAX
(6.35) 0.150
(3.81)
0.28.01
(7.1.3)
2.63
(66.8)
1.969
(50.0)
1.885
(47.9)
1.575
(40.0)
1.03 DIA
(26.2)
20
1.869 (47.5)
1.865 (47.3)
DIA
(4) 0.40 X 0.28 SLOTS
(10.2 X 6.1)
PILOT DIA
1.511 (38.4)
1.504 (38.2)
X 0.157 (3.99) DEEP
1.685 1.675
(42.8) (42.5)
2.272.030
(57.7.8)
44
1.63
(41.4)
3.27
(83.1)
4.00
(101.6)
DIA
3.86
(98.0)
1.00.04
(25.41)
0.880.04
(22.41)
0.281
(7.1)
0.3125
(7.9)
LENGTH
LENGTH
INCHES
MM
0.05
1.30
E
4.71
119.6
4.96
F
126.0
G
5.21
132.3
H
5.46
138.7
J
5.71
145.0
K
5.96
151.4
L
6.21
157.7
M N P
6.96
176.8 170.4
6.71 6.46
164.1
PUMP MOUNT
ELECTROMATE
www.electromate.com
Sold & Serviced By:
Rated Load
Starting
Capacitor
Motor Poles Performance Lengh Voltage Frequency HP Rating Amps Watts Speed Torque Maximum Amps Torque Mfd. Vac
KP 2 08 E 115 60 1/25 0.5 54 3460 12.0 21 1.3 5.0 6.0 236
KP 2 09 F 115 60 1/20 0.6 65 3490 14.8 31 1.9 6.0 7.5 236
KP 2 10 F 115 60 1/15 0.8 87 3470 20.0 35 2.0 8.4 10.0 236
KP 2 11 G 115 60 1/12 0.9 98 3495 37.8 45 2.9 9.6 12.0 236
KP 2 12 H 115 60 1/10 1.0 107 3495 41.2 56 3.6 10.4 12.0 236
KP 2 13 J 115 60 1/8 1.2 127 3485 49.2 70 4.6 9.8 12.0 236
KP 2 14 K 115 60 1/6 1.6 167 3480 65.2 84 5.7 11.9 15.0 236
KP 2 15 L 115 60 1/5 1.8 194 3490 75.2 111 7.2 16.7 20.0 236
KP 2 16 M 115 60 1/4 2.3 238 3485 92.4 140 9.4 17.0 20.0 236
KP 2 17 N 115 60 1/3 2.8 316 3450 99.0 186 12.7 24.3 25.0 236
KP 4 06 F 115 60 1/40 0.4 38 1730 14.8 26 0.7 8.9 5.0 236
KP 4 07 G 115 60 1/30 0.4 44 1730 19.7 34 1.0 11.3 6.0 236
KP 4 08 G 115 60 1/25 0.5 56 1730 23.7 39 1.0 14.2 7.5 236
KP 4 09 H 115 60 1/20 0.6 65 1730 29.6 50 1.3 16.5 9.0 236
KP 4 10 J 115 60 1/15 0.7 84 1740 39.3 71 2.0 22.4 12.0 236
KP 4 11 K 115 60 1/12 0.9 102 1735 48.9 91 2.6 28.5 15.0 236
KP 4 12 L 115 60 1/10 1.0 115 1740 58.9 108 3.1 28.4 15.0 236
KP 4 13 M 115 60 1/8 1.3 143 1735 73.5 125 3.6 36.8 20.0 236
KP 4 14 N 115 60 1/6 1.6 178 1725 97.2 171 3.7 44.7 25.0 236
KP 2 08 E 220 50 1/25 0.3 57 2855 14.4 22 0.6 4.1 1.5 370
KP 2 09 F 220 50 1/20 0.3 70 2900 17.8 33 1.0 5.8 2.0 370
KP 2 10 F 220 50 1/15 0.4 88 2870 24.0 36 1.1 7.5 2.5 370
KP 2 11 G 220 50 1/12 0.4 89 2915 24.0 47 1.5 8.0 3.0 370
KP 2 12 H 220 50 1/10 0.5 105 2900 36.3 62 1.8 11.0 4.0 370
KP 2 13 J 220 50 1/8 0.6 117 2890 44.4 69 2.2 7.8 3.0 370
KP 2 14 K 220 50 1/6 0.8 149 2885 60.0 78 2.5 9.4 4.0 370
KP 2 15 L 220 50 1/5 0.8 125 2890 72.0 75 2.3 9.3 5.0 370
KP 2 16 M 220 50 1/4 1.5 243 2900 90.0 136 4.4 16.9 5.0 370
KP 2 17 N 220 50 1/3 1.2 266 2850 120.0 152 3.8 32.7 10.0 370
KP 4 06 F 220 50 1/40 0.2 37 1430 17.8 31 0.4 7.7 1.3 370
KP 4 07 G 220 50 1/30 0.2 47 1430 23.6 44 0.6 10.0 1.5 370
KP 4 08 G 220 50 1/25 0.3 56 1430 28.4 50 0.7 13.0 2.0 370
KP 4 09 H 220 50 1/20 0.3 71 1440 35.5 75 0.9 24.0 2.5 440
KP 4 10 J 220 50 1/15 0.4 80 1455 35.5 96 1.4 21.0 3.0 370
KP 4 11 K 220 50 1/12 0.6 114 1440 58.8 130 1.8 30.0 4.0 370
KP 4 12 L 220 50 1/10 0.6 128 1430 72.0 150 2.1 30.0 4.0 370
KP 4 13 M 220 50 1/8 0.8 156 1430 90.0 166 2.4 34.1 5.0 370
KP 4 14 N 220 50 1/6 1.0 195 1425 120.0 199 2.9 38.1 6.0 370
ELECTROMATE
www.electromate.com
Sold & Serviced By:
41
Rated Load
Starting
Capacitor
KL 2 09 F 115 60 1/20 1.0 80 3450 14.6 32 6.2 44.7 124.0 110
KL 2 10 G 115 60 1/15 1.1 92 3450 19.5 44 6.7 55.6 124.0 110
KL 2 11 H 115 60 1/12 1.3 107 3450 24.6 53 7.9 67.1 145.0 110
KL 2 12 J 115 60 1/10 1.5 123 3450 29.5 64 9.1 84.9 161.0 110
KL 2 13 K 115 60 1/8 1.6 148 3450 37.2 73 10.5 102.0 189.0 110
KL 4 12 M 115 60 1/10 0.6 128 1430 72.0 150 2.1 30.0 4.0 370
KL 4 13 N 115 60 1/8 0.8 165 1430 90.0 175 2.5 36.0 5.0 370
KL 4 14 P 115 60 1/6 1.2 225 1425 120.0 230 3.4 44.0 6.0 370
KL 2 09 F 220 50 1/20 0.7 99 2855 17.6 36 2.6 38.0 30.0 220
KL 2 10 G 220 50 1/15 0.8 108 2860 23.5 47 2.7 48.0 30.0 220
KL 2 11 H 220 50 1/12 0.8 120 2870 29.4 61 3.5 63.0 36.0 220
KL 2 12 J 220 50 1/10 0.9 135 2875 35.4 75 4.1 80.0 43.0 220
KL 2 13 K 220 50 1/8 1.0 155 2860 44.6 86 4.5 94.0 47.0 220
KL 2 14 L 220 50 1/6 1.4 200 2875 60.0 150 5.8 133.0 53.0 220
KL 4 10 K 220 50 1/15 1.0 123 1420 47.3 110 2.8 108.0 21.0 220
KL 4 11 L 220 50 1/12 1.1 150 1415 60.0 123 3.9 140.0 43.0 165
KL 4 12 M 220 50 1/10 1.2 162 1410 72.0 145 3.7 160.0 30.0 220
KL 4 13 N 220 50 1/8 1.6 200 1415 90.0 200 4.5 188.0 30.0 220
KL 4 14 P 220 50 1/6 1.9 265 1400 122.0 210 5.1 250.0 43.0 220
L 2 10 G 230 60 1/15 0.3 77 3425 19.7 64 0.5 64.5 - -
L 2 11 H 230 60 1/12 0.3 90 3425 24.7 85 0.7 85.6 - -
L 2 12 H 230 60 1/10 0.4 108 3420 29.5 96 1.1 92.5 - -
L 2 13 J 230 60 1/8 0.4 128 3420 36.5 127 1.3 122.5 - -
L 2 14 K 230 60 1/6 0.5 165 3415 48.9 175 2.1 166.8 - -
L 2 15 L 230 60 1/5 0.5 199 3405 59.1 196 2.5 180.3 - -
L 2 16 M 230 60 1/4 0.6 244 3420 73.7 276 3.7 258.2 - -
L 2 17 M 230 60 1/3 0.9 326 3400 99.6 269 5.0 224.0 - -
L 4 05 F 230 60 1/50 0.1 30 1705 11.8 50 0.5 46.0 - -
L 4 06 F 230 60 1/40 0.2 36 1710 14.7 60 0.7 55.0 - -
L 4 07 G 230 60 1/30 0.2 44 1710 19.6 82 0.9 75.0 - -
L 4 08 H 230 60 1/25 0.2 53 1715 23.6 96 1.0 88.0 - -
L 4 09 H 230 60 1/20 0.3 61 1710 29.5 121 1.2 112.0 - -
L 4 10 J 230 60 1/15 0.3 76 1710 39.4 166 1.6 155.0 - -
L 4 11 K 230 60 1/12 0.4 97 1715 49.3 204 2.1 191.0 - -
L 4 12 L 230 60 1/10 0.4 109 1710 58.9 237 2.3 224.0 - -
L 4 13 M 230 60 1/8 0.6 136 1720 74.0 267 2.9 237.0 - -
L 4 14 N 230 60 1/6 0.7 168 1725 99.0 397 3.5 351.0 - -
All torque values are in ounce-inches. Permanent Split Capacitor; KL=Capacitor Start; L=Polyphase. Other motor types not shown here: SKP=Synchronous Permanent Split Capacitor; SKL=Synchronous Capacitor Start
ELECTROMATE
www.electromate.com
Sold & Serviced By:
E l e c t r o C r a f t A C S e r i e s Mo t o r s Mo d e l I n f o r ma t i o n
Motor Type
KL- Capacitor Start
KP- Permanent Split Capacitor
L- Polyphase
SKP- Synchronous Split Capacitor
SKL- Synchronous Capacitor Start
Frame Designator
26- 26 Frame (3.11 Diameter)
Performance Designator
26- 05-13 (see catalog)
Z- Custom consult factory
Speed Designator
2- 2 Pole
4- 4 Pole
Z- Custom consult factory for availability
Voltage Designator
A- 115V 60 Hz
B- 220V 50 Hz
C- 230V 60 Hz
Enclosure Designator
O- Open Ventilated (see catalog for performance details)
V- TENV (consult factory for performance details)
F- Fan Cooled (33 Frame only)
Shaft Configuration
S- Standard (see catalog)
Front Head Designator
See catalog for details
26 Frame
S- Standard Flat Head STD Tap
F- Four [4] Boss Mount on 2.625 B.C.
R- Resilient Hub
Z- Custom - consult factory
29 Frame
F- Four [4] Stud Mount
33 Frame
F- Four [4] Boss Mount on 2.844 B.C.
R- Resilient Hub
B- Four [4] Boss Mount on 1.75 B.C.
M- Four [4] Boss Mount on
2.625 thru 3.125 B.C.
P- Pump Mount
Rear Head Designator
See catalog for details
S- Standard Flat Head
R- Resilient Hub (26, 33 Frames only)
Foot Mount (omit if not required)
W- Rigid Base
T- Resilient Base (26, 33 Frames only)
Lead Designator
F- Flying leads
J- Junction box (33 Frame only)
Z- Custom consult factory for
terminals or connectors
ElectroCraft AC Series Model
Number Designations
KL33 084A OSBSWF
ELECTROMATE
www.electromate.com
Sold & Serviced By:
E l e c t r o C r a f t A C S e r i e s Mo t o r s Mo d e l I n f o r ma t i o n
43
AC Series Model Designations
Motor Type
Frame Designator
Performance Designator
Speed Designator
Voltage Designator
Enclosure Designator
Shaft Configuration
Front Head Designator
Rear Head Designator
Foot Mount (omit if not required)
Lead Designator
ELECTROMATE
www.electromate.com
Sold & Serviced By:
ElectroCraft E2200 Series
The 2200 series offers reliable performance in a small package for your low voltage,
lower torque range applications. This series utilizes integrated hall effects to
provide consistent speed in either rotation in a small envelope.
The 2200 series supports application speeds up to 15,000 RPM
while providing long reliable performance.
Centrifuges
Laboratory Equipment
Copiers
Printers
Pumps
Dynamically balanced armature
High torque-to-weight and
intertia ratios
smooth operation
Rare earth neodymium magnets
for high acceleration and speed
capability
Speeds up to 15000 RPM
E2200 Series
Brushless Motors
E l e c t r o C r a f t E 2 2 0 0 S e r i e s B r u s h l e s s Mo t o r s
ELECTROMATE
www.electromate.com
Sold & Serviced By:
Mechanical Data
Maximum Friction Torque (oz-in) 0.5 1.1
Maximum Radial Load
(25mm from bearing) (Kg) 2.3 2.3
Maximum Radial Load
(25mm from bearing) (lbs) 5 5
Weight (Kg) 0.8 0.9
Weight (lbs) 1.75 2
Electrical Data A B A B
Kt Torque Constant +-10% (Ncm/amp) 4.0 8.4 4.0 8.0
Kt Torque Constant +-10% (oz-in/amp) 5.7 11.9 5.7 11.3
Ke Voltage Constant +-10% (V/Krpm) 4.2 8.8 4.2 8.4
Terminal Resistance (ohms) 1 4.1 0.33 1.3
Maximum Continuous Current (A) 4.2 2.0 8.4 4.2
Maximum Peak Current (A) 19 9 38 19
Armature Inductance (mH) 1.5 6.2 0.5 2.5
Hall Effect Electrical Data
Hall type Three channel
Output type Open collector transistor
Output sink current 10mA at 0.4 Volt maximum
(On state) Output Voltage 4.9 Volt minimum
(On state) Power supply 5VDC at 20mA DC
Operating temperature 0 to 70C
C.W. Rotation Motor
Phase R Blue
Phase S Brown
Phase T Violet
Hall Board +5V Red
Hall Board Ground Black
Hall Board Hall A Yellow
Hall Board Hall B White
Hall Board Hall C Orange
E2200 Series Performance Specifications
1.000
0.70
0.100
0.3145DIA
0.3140
DIA
0.2492
0.2497
2210 = 3.0
2200 = 4.0
(4)6-32 UNC-2B THRU
EQ SP ON A 1.531 DIA BC
45 REF
2.20 SQ
0.998 DIA
1.000
(4) HOLES TAPPED M4 THRU
EQ SP ON 38.9MM DIA BC
45 REF
55.88 SQ
25 DIA
+.000
-.051
2.54
25
8.
+.0000 DIA
-.0102 DIA
0.81
0.050
(4)0.205.010 DIA THRU
EQ SP ON A 2.625 DIA BC
45 REF
1.502 DIA
1.498
2.27 SQ
(2) #2-56 UNC-2B
x .10 MIN THD DPTH
(2) #4-40 UNC-2B TAPPED THRU HOLES - ENGLISH
(2) M2 X 0.4 - 6H TAPPED THRU HOLES - METRIC
0.669
0.640
0.251
0.669
0.640
0.251
0.640
0.640
ENGLISH
NEMA 23 OPTION
METRC OPTION
45
0
3000 6000 9000 12000 15000
SPEED (RPM)
E2210 E2220
120
20
40
60
80
100
.8
.6
.4
.2
80
120
160
200
0
40
3000 6000 9000 12000
.4
.8
1.2
SPEED (RPM)
INTERMITTENT
OPERATING REGION
INTERMITTENT
OPERATING REGION
HALL - A
HALL - B
HALL - C
S - T
T - R
R - S
S - T
T - R
R - S
Commutation Sequence Diagram
For CCW Rotation Viewed from Mounting Face
ELECT DEGREES 0 60 120 180 240 300 360
V
V
V
PHASE TO PHASE VOLTAGE
ELECTROMATE
www.electromate.com
Sold & Serviced By:
The 2600 series offers reliable performance in a small package for your low
voltage, lower torque range applications. This series features an economic
design available in both closed and open shell configurations.
Material Handling
Packaging
Marking Equipment
Copiers
Printers
Pumps
Skewed magnetization for low
torque ripple and smooth low
speed performance
M-8 ceramic magnets for high
acceleration and speed capability
smooth operation
E2600 Series
Brushless Motors
ELECTROMATE
www.electromate.com
Sold & Serviced By:
30
15
(2)#4-40 UNC-2B THRU ON A 1.812 DIA
2610 = 4.32
2620 = 5.32
0.700
0.2497
0.2492
0.3145 DIA
0.3140
1.50
0.062
0.375
1.190
0.3750 DIA
0.3745
2.75
3.38 SQ
2.875
2.873
1.375
2.75
(4) 0.220 DIA THRU
45
90
60 REF
3.33 OVER CLIPS
3.11 DIA
(4) #6-32 UNC-2B X 0.20 TAPPED THRU HOLES
ENGLISH
NEMA 34D OPTION
Mechancial Data
Maximum Friction Torque (oz-in) 2 2.5
Maximum Radial Load
(25mm from bearing) (Kg) 6.8 6.8
Maximum Radial Load
(25mm from bearing) (lbs) 15 15
Weight (Kg) 1.4 2.3
Weight (lbs) 3.1 5
Electrical Data A B A B
Kt Torque Constant +-10% (Ncm/amp) 11.4 22.9 11.4 22.9
Kt Torque Constant +-10% (oz-in/amp) 16.2 32.4 16.2 32.4
Ke Voltage Constant +-10% (V/Krpm) 12.0 24.0 12.0 24.0
Terminal Resistance (ohms) 2.1 8.4 0.71 2.6
Maximum Continuous Current (A) 1.8 0.9 3.5 1.7
Maximum Peak Current (A) 9 4.5 15.1 7.6
Armature Inductance (mH) 4.2 16.8 1.8 7.3
C.W. Rotation Motor
Phase R Blue
Phase S Brown
Phase T Violet
Hall Board +5V Red
47
0
1500 3000 4500 6000 7500
TORQUE (Nm)
TORQUE (OZ-IN)
TORQUE (Nm)
TORQUE (OZ-IN)
SPEED (RPM)
1500 3000 4500 6000 7500
SPEED (RPM)
E2610 E2620
80
120
160
200
1.2
.8
.4
2
1.5
1
.5
40
0
150
100
200
250
300
50
INTERMITTENT
OPERATING REGION
INTERMITTENT
OPERATING REGION
HALL - A
HALL - B
HALL - C
S - T
T - R
R - S
S - T
T - R
R - S
ELECT DEGREES 0 60 120 180 240 300 360
V
V
V
ELECTROMATE
www.electromate.com
Sold & Serviced By:
The 2900 series offers high output in a highly efficient package for mid to low
voltage, mid-level to high torque applications. This series features an economic
Pumps
Fans
Conveyors
Light Industrial
speed performance
M-8 ceramic magnet
smooth operation
E2900 Series
Brushless Motors
ELECTROMATE
www.electromate.com
Sold & Serviced By:
11.00 DIA
10.99
2.50
23
60
45
(2)#4-40 UNC-2B THRU ON A 1.812 DIA
2.75
3.38 SQ
2.875 DIA
2.873
1.375
2.75
(4) 0.220 DIA THRU
45
(4) #8-32 UNC-2B X 0.15 DP
2910 = 4.36
2920 = 5.36
2930 = 6.36
0.2497 DIA
0.2492
0.68 1.00
0.5000 DIA
0.4995
45
50.00 DIA
49.95 (4)M5 X 0.8 THRU EQ SP ON A 65MM D
0.062
0.375
1.190
ENGLISH
NEMA 34D OPTION
METRIC OPTION
0.3750 DIA
0.3745
Peak Torque (Ncm) 137.7 229.5 406.1
Mechancial Data
Maximum Radial Load
(25mm from bearing) (Kg) 6.8 6.8 6.8
Maximum Radial Load
(25mm from bearing) (lbs) 15 15 15
Weight (Kg) 1.5 2.6 3.6
Weight (lbs) 3.3 5.8 7.9
Terminal Resistance (ohms) 1.36 5.28 0.49 1.86 0.30 1.03
Maximum Continuous Current (A) 3.1 1.5 5.2 2.6 9.0 4.5
Maximum Peak Current (A) 12 6 20 10 35 17.7
C.W. Rotation Motor
Phase R Blue
Phase S Brown
Phase T Violet
Hall Board +5V Red
49
0
1500 3000 4500 6000 7500
TORQUE (Nm)
TORQUE (OZ-IN)
TORQUE (Nm)
TORQUE (OZ-IN)
SPEED (RPM)
1500 3000 4500 6000 7500
SPEED (RPM)
E2910 E2920
100
200
150
250
300
2
1.5
1
.5
2.5
1.5
2
1
.5
50
0
180
120
240
300
360
60
INTERMITTENT
OPERATING REGION
0
1500 3000 4500 6000 7500
TORQUE (Nm)
TORQUE (OZ-IN)
SPEED (RPM)
E2930
200
400
300
500
600
2
1.5
1
.5
100
INTERMITTENT
OPERATING REGION
INTERMITTENT
OPERATING REGION
HALL - A
HALL - B
HALL - C
S - T
T - R
R - S
S - T
T - R
R - S
ELECT DEGREES 0 60 120 180 240 300 360
V
V
V
ELECTROMATE
www.electromate.com
Sold & Serviced By:
The 3300 series offers high output in a highly efficient package for mid to low
voltage, mid-level to high torque applications. This series features an economic
Material Handling
Pumps
Fans
Medical
Light Industrial
speed performance
smooth operation
E3300 Series
Brushless Motors
ELECTROMATE
www.electromate.com
Sold & Serviced By:
Peak Torque (Ncm) 173.0 335.5 512.0
Mechancial Data
Maximum Friction Torque (oz-in) 3 3.5 4
Maximum Radial Load
(25mm from bearing) (Kg) 9.1 9.1 9.1
Maximum Radial Load
(25mm from bearing) (lbs) 20 20 20
Weight (Kg) 2.2 3.4 4.5
Weight (lbs) 4.9 7.4 9.9
Terminal Resistance (ohms) 0.94 3.63 0.33 1.18 0.18 0.63
Maximum Continuous Current (A) 3.3 1.6 6.5 3.2 10.6 5.4
Maximum Peak Current (A) 15.1 7.6 29.3 14.7 49.0 24.0
C.W. Rotation Motor
Phase R Blue
Phase S Brown
Phase T Violet
Hall Board +5V Red
51
HALL - A
HALL - B
HALL - C
S - T
T - R
R - S
S - T
T - R
R - S
ELECT DEGREES 0 60 120 180 240 300 360
V
V
V
1.000
FULL KEYSEAT
0.32
0.062
1.380
0.6250 DIA
0.6245
40
1.778
29.97
FULL KEYWAY
(4) #8-32 UNC-2B X .38 DP TAPPED HOLES
ENGLISH
METRIC OPTION
NEMA OPTION
60 REF
45
4.20 SQ
3.50 TYP
(4) 0.281 DIA THRU
(3)#10-32 UNF 3/8 DP EQ SP ON 3.00 DIA BC
0.188
2.186 DIA
3.50 TYP
0.517
0.502
X 0.8 TAPPED THRU HOLES ON A
75MM DIA
45
98 DIA MAX
90
60
DIA
(2) #4-40 UNC-2B TRAPPED THU
15
3310 = 4.61
3320 = 5.61
3330 = 6.61
.2500 DIA
.2495
1.00 0.70
.4995 DIA
.4990
0
1500 3000 4500 6000 7500
TORQUE (Nm)
TORQUE (OZ-IN)
TORQUE (Nm)
TORQUE (OZ-IN)
SPEED (RPM)
1500 3000 4500 6000 7500
SPEED (RPM)
E3310
E3330
100
200
150
250
300
2
1.5
1
.5
1
2
3
4
5
50
320
160
480
640
800
0
INTERMITTENT
OPERATING REGION
0
1500 3000 4500 6000 7500
TORQUE (Nm)
TORQUE (OZ-IN)
SPEED (RPM)
E3320
200
400
300
500
600
2
1.5
1
.5
100
INTERMITTENT
OPERATING REGION
INTERMITTENT
OPERATING REGION
ELECTROMATE
www.electromate.com
Sold & Serviced By:
E l e c t r o C r a f t E S e r i e s Mo d e l I n f o r ma t i o n
Series
E-Brushless Servo Motors
Frame Designator
22- 2.2 Frame (2.20" square)
26- 26 Frame (3.11" Diameter)
29- 29 Frame (3.42" Diameter)
Length Designator
05-30 based on available
motor lengths (see catalog)
Winding Designator
A- see catalog for specific values
B- see catalog for specific values
Z- Custom
Mounting Designator
E-English
M-Metric
N-NEMA
Z-custom-consult factory
Lead Designator
F- Flying leads -
see catalog if applicable
J- Junction Box - 33 Frame only
Z- Custom
Feedback Designator
1,2,Z- 1=1000ppr, 2=2000ppr,
Z=custom line counut
H- Hall effect only
Brake Designator
1,2,3,Z- 1=12VDC, 2=24VDC
3=90VDC, Z=Custom
ElectroCraft E Series
Model Designations
E22 05A ETH2
ELECTROMATE
www.electromate.com
Sold & Serviced By:
E l e c t r o C r a f t E S e r i e s Mo d e l I n f o r ma t i o n
53
E Series Model Designations
Series
Frame Designator
Length Designator
Winding Designator Brake Designator
Feedback Designator
Lead Designator
Mounting Designator
ELECTROMATE
www.electromate.com
Sold & Serviced By:
ELECTROMATE
www.electromate.com
Sold & Serviced By:
E l e c t r o C r a f t N o t e s
N
O
T
E
S
ELECTROMATE
www.electromate.com
Sold & Serviced By:
E l e c t r o C r a f t N O T E S
ELECTROMATE
www.electromate.com
Sold & Serviced By:
ElectroCraft Engineered Solutions is dedicated to supplying customized solutions for OEM power transmission
requirements. By combining the innovative thinking of skilled personnel with quality manufacturing processes and
specialized equipment, we are able to offer premium AC, DC servo, and brushless DC motors, which have become world
recognized for their quiet operation, high efficiency and robust designs. We offer complete packages to OEMs to allow the
ease of purchasing all their power transmission solutions from a single source. ElectroCraft Engineered Solutions is
dedicated to supplying the OEM with optimized automation solutions. Quiet operation, high efficiency, and robust designs
have earned us a reputation for leadership in the industry. We offer a complete package of motor, gearhead, transaxle,
and brake in a variety of design options and gear ratios. For additional information on this product or any other ElectroCraft
products, please contact your nearest ElectroCraft sales office.
Publication EC-001 April, 2005
ELECTROMATE
www.electromate.com
Sold & Serviced By:

Electrocraft Legacy Catalog

Uploaded by

Copyright:

Available Formats

Electrocraft Legacy Catalog

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Electrocraft Legacy Catalog

Uploaded by

Copyright:

Available Formats

ELECTROMATE

Toll Free Phone (877) SERVO98

You might also like