Electrocraft Linear Motors Catalog

Linear
AxialPower Series
Drives
SA-Series
DA-Series
SC-Series
Linear Products
Catalog LP01ENe
36
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
This guide has been developed as a quick reference tool for ElectroCraft products.
It is not intended to replace technical documentation or proper use of standards
and codes in installation of product.
Because of the variety of uses for the products described in this publication, those
responsible for the application and use of this product must satisfy themselves
that all necessary steps have been taken to ensure that each application and use
meets all performance and safety requirements, including all applicable laws,
regulations, codes and standards.
Reproduction of the contents of this copyrighted publication, in whole or in part
without written permission of ElectroCraft is prohibited.
Designed by media & brands www.media-brands.de
For over 60 years, ElectroCraft has been
helping engineers translate innovative
ideas into reality one reliable motor at
a time. As a global specialist in custom
motor and motion technology, we provide
the engineering capabilities and worldwide
resources you need to succeed.
ELECTROMATE
www.electromate.com
Sold & Serviced By:
Table of Contents
Typical Applications . . . . . . . . . . . . . . . . 3
Which Linear Product . . . . . . . . . . . . . . . 5
Drive Product Matrix . . . . . . . . . . . . . . . 6
AxialPower Plus Stepper . . . . . . . . . . . . 7
APPS11M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
APPS17 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
APPS23 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
L3-Series Stepper . . . . . . . . . . . . . . . 13
L3S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
AxialPower Plus PMDC . . . . . . . . . . . . 15
APPD15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
APPD25 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
SA-Series . . . . . . . . . . . . . . . . . . . . 19
SA45 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
SA49 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
DA-Series. . . . . . . . . . . . . . . . . . . . 23
DA43 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
DA47 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
SC-Series . . . . . . . . . . . . . . . . . . . . 27
SCA-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
SCA-S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
System Matrix. . . . . . . . . . . . . . . . . . 31
Other Products . . . . . . . . . . . . . . . . . 33
Drives Accessories . . . . . . . . . . . . . . . . 36
A
P
P
S
L
3
A
P
P
D
S
A
D
A
S
C
ElectroCraft AxialPower Plus, SA-Series, DA-Series & SC-Series
2
ELECTROMATE
www.electromate.com
Sold & Serviced By:
Typical applications for
ElectroCraft Linear Products:
Custom OEM applications
(Our Specialty)
Packaging
Semiconductor handling and testing
Antenna positioning
Laboratory equipment
Rapid prototyping machines
Medical equipment
Dispensing
Medical Dispensing Pump
Situation: An existing ElectroCraft customer wished
to expand their line of medical dispensing pumps.
Critical performance metrics included linear speed,
axial force, and precise linear positioning.
The customer required a wide range of output
performance and input power requirements to
successfully complete the family product offering.
Solution: ElectroCraft was able to design custom
windings for the complete linear product offering
combining both the linear actuator and leadscrew
motor confgurations, reducing the number of parts
required yet still cover the customers broad range
of linear speed, force, and positioning requirements.
Results: ElectroCraft was able to reduce inventories
through design and combined this effort with a
Lean manufacturing based pull-system and Kanban
program to further reduce inventory while
improving delivery performance regardless of the
customers fuctuations in demand.
An ElectroCraft linear actuator with a custom
mechanical confguration helps keep liquid and
this business fowing.
ELECTROMATE
www.electromate.com
Sold & Serviced By:
Helicopter Autopilot
Situation: A manufacturer interested in introducing
a completely new technology of autopilot system
approached ElectroCraft for an innovative solution.
Positional accuracy was critical in this application.
The customer was looking for a collaborative effort
into the design of the electro-mechanical device.
Solution: ElectroCraft modifed a size 17 Linear
Actuator with a custom Mil-spec cable assembly,
special lead-screw insert and lubrication in order to
deliver prototypes quickly. Further collaboration with
our customers innovative R&D team improved the
overall performance on subsequent design iterations.
Results: The customer is fying high. Their concept is turned into reality as their product is being fnal tested and
approved for fight.
Chromatography Platform
Situation: A leading manufacturer of high end chromatography instruments needed a cost effective solution
for a high pressure requirement in a new platform chromatography instrument.
Solution: ElectroCraft incorporated ballscrew technology into our most powerful 34 frame Linear Actuator to
produce a compact, yet powerful product. Capable of generating over 900 pounds of force, this linear actuator
integrates a high precision ball-nut into the rotor assembly with the ballscrew providing the positional accuracy
and the high linear force needed to generate pressures in excess of 15,000 psi.
Results: The capability of the high force and compact linear actuator allowed the customer to expand their product
into new markets and opportunities for their customer base.
The pressure is on
this high powered
linear actuator at the
heart of this analytical
instrument.
ElectroCraft helps steer the way for a new generation of
helicopter auto-pilot systems.
4
ELECTROMATE
www.electromate.com
Sold & Serviced By:
Guided Linear
Actuator
A mechanical assist to the linear actuator to restrict
the leadscrew from rotating with the rotor.
Leadscrew Motor
Rotating screw with an axial translating external nut.
Linear Actuator
A true Push-Pull, axially translating screw.
Select your
Linear Products!
Functionality:
A composite insert is
permanently integrated
with the motor rotor
and rotates
A threaded screw
traverses axially in
and out of the
motor body
Functionality:
The leadscrew is
permanently integrated
with the motor rotor and
rotates
An external nut rides back
and forth along the screw
length providing the push
and pull
Functionality:
Some linear applications
do not restrict the
leadscrew from rotating
The Guided Linear
Actuator feature restricts
the screw from rotating,
allowing the leadscrew to
translate axially
ELECTROMATE
www.electromate.com
Sold & Serviced By:
Bipolar Stepper Drive PMDC Servo Drive
S
A
4
5
0
5
S
A
4
5
1
0
D
A
4
3
0
3
D
A
4
7
0
9
D
A
4
7
1
8
S
C
A
-
L
S
-
3
0
-
0
3
S
C
A
-
S
S
-
3
0
-
0
6
Product Description
See on page 19 21 23 25 25 27 29
Power Features
Min. Voltage (VDC) 11 11 11 11 11 11 11
Max. Voltage (VDC) 48 48 30 70 70 30 30
Dual Bridge MOSFET Driver
Switching Frequency (kHz) 50 50 Linear 50 50 50 50
Linear Output
PWM Output
Trap Waveform
Power Ratings
Peak Current 5 10 3 18 36 3 6
Nominal Current 5 10 3 9 18 3 6
Adjustable Current
Max Continuous Power (W) 240 480 75 1260 2520 75 150
Control Modes
Max. Step Input Frequency (kHz) 40 40
Microstepping up to 1/16
Internal Oscillator (x8)
External Pulse Train (5-24 Logic)
Fallback Current
Analog Command (VDC) +1 to +5 VDC +1 to +5 VDC 10 10 10 10 10
Torque Control
I/R Compensation
Speed Control using Tach
Speed Control using Voltage
Speed Control using Encoder
Communication / Compliance
CE Compliance (LV Directive)
Physical Enclosure
Totally Enclosed
Case Type Book Shelf Book Shelf Book Shelf Book Shelf Book Shelf Rack Rack
Drive Product Matrix
6
ELECTROMATE
www.electromate.com
Sold & Serviced By:
Size Holding Torque
oz-in (Ncm)
Linear Speed
inch / sec (mm / sec)
Linear Force
Pounds (Newton)
Dimensions in millimeters.
Step 1: APPS11M Frame Size Drawing Key
Model Length Weight Holding
Torque
Roter Inertia
A B C D E F G
Pilot
Length
Pilot
Diameter
Mount
Hole
Callout
Mount
Hole
Spacing
External
Flange
Dimension
External
Nut
Thread
Screw
End
Mod
APPS11M-7
1.24 in
(31.5mm)
4.0 oz
(110g)
9.5 oz-in
(6.7 Ncm)
0.002 oz-in-sec
2

1.41
-3
Ncm-sec
2
2.0 mm
22.00 +0.00 /
-0.03 mm
M2.5 x 0.45 mm
dia 3.5 mm Deep
23 mm 28 mm M10 x 1.0
6-32 UNF
M2.4 x 0.45
0.098 / 0.097
in (2.5 mm)
Dia Journal
APPS11M-10
1.56 in
(39.6mm)
5.1 oz
(145g)
13.7 oz-in
(9.7 Ncm)
0.0035 oz-in-sec
2

2.47
-3
Ncm-sec
2
12.7
7.9
18
Length
5.6
11.4
Leadscrew
#24 AWG UL1061
305 mm
68.6
Actuator Housing
required for
Guided Linear
Actuator only
End
Modifcation
External Nut
required for
Leadscrew Motor
15.9
17.5
34
Encoder (optional)
available on:
Linear Actuator
Leadscrew Motor
Reliable. Precise.
The ElectroCraft size 11 stepper-based linear actuator is ultra-reliable and made to exacting
standards incorporating precision materials all designed to provide reliable performance with
axial resolution in the microns.
0 = Linear Actuator
1 = Leadscrew Motor
2 = Guided Linear Actuator
APPS11M : ElectroCraft AxialPower Plus | Linear Actuator Stepper
NEMA 11, 1.8 14 (10) 16 (400) 32 (140)
To build your own linear product, choose the:
ELECTROMATE
www.electromate.com
Sold & Serviced By:
Need an anti-backlash feature or
dont see exactly what you need?
Have ElectroCraft build you a
custom winding, stack length or
fully customized linear product
thats our specialty!
Still need help?
Easily build your own motor at
www.confgureamotor.com
A
P
P
S
Step 2: APPS11M Torque and Mechanical Data (Bipolar)
Curves are approximaned as straight line for ease of use.
Thread
Designation
Thread Lead
Inches (mm) / Rev
Linear Travel
Inch (mm) / Full-Step
D 3/16-20 ACME (1S) 0.050 (1.3) 0.00025 (0.0064)
L 3/16-24 ACME (3S) 0.125 (3.2) 0.00063 (0.0160)
M 3/16-24 ACME (8S) 0.333 (8.5) 0.00167 (0.0424)
20
25
10
5
15
88
110
44
22
66
0 0
Speed, inch (mm) / second @ 48VDC
0 4 (100) 8 (200) 12 (300) 16 (400)
0 2 (50) 4 (100) 6 (150) 8 (200)
35 156
30 132
APPS11M-10
Step Angle = 1.8, 9.5 oz-in hold torque
Supply = 48 VDC X 1 amp/phase
= 24 VDC X 1 amp/phase
P
o
u
n
d
s
N
e
w
t
o
n
s
D L M
20
25
10
5
15
88
110
44
22
66
0 0
0 4 (100) 8 (200) 12 (300) 16 (400)
0 2 (50) 4 (100) 6 (150) 8 (200)
35 156
30 132
APPS11M-7
Step Angle = 1.8, 9.5 oz-in hold torque
P
o
u
n
d
s
N
e
w
t
o
n
s
D L M
Step 3: Available Windings
B
i
p
o
l
a
r
Metric 7A05 7A10 7A15 10A05 10A10 10A15
Current Bipolar
(A/Phase)
0.5 1.0 1.5 0.5 1.0 1.5
Phase Voltage
VDC
5.0 2.5 1.7 6.2 3.1 2.1
Phase Resistance
(ohm)
10.00 2.50 1.10 12.40 3.10 1.40
Phase Inductance
(mH)
6.8 1.5 0.7 10.4 2.7 1.1
Motor step rate calculation: Motor step rate (halfstep/sec) = [Speed (in/sec)*2] / [travel (in/fullstep)] Example L thread pitch: @ 2 in/sec = 6,350 halfsteps/sec
Unipolar windings available upon request.
8
ELECTROMATE
www.electromate.com
Sold & Serviced By:
Size Holding Torque
oz-in (Ncm)
Linear Speed
Linear Force
Pounds (Newton)
Step 1: APPS17 & APPS17M Frame Size Drawing Key
Torque
Roter Inertia
A B C D E F G
Pilot
Length
Pilot
Diameter
Mount
Hole
Callout
Mount
Hole
Spacing
External
Flange
Dimension
External
Nut
Thread
Screw
End
Mod
APPS17-29 1.28 in 7 oz 29 oz-in 0.00053 oz-in-sec
2
0.08 in
0.8660 in
0.8648 in
[4] 4-40UNC-2B
0.17 in deep
1.22 in 1.65 in 3/8-40 UNF
10-32UNF
M5 x 0.8
0.196 / 0.195
(5) dia Journal
APPS17-47 1.52 in 9 oz 47 oz-in 0.00081 oz-in-sec
2
APPS17M-21 32.5 mm 198 g 21 Ncm 3.74
-4
Ncm-sec
2
2.0 mm
22.00 mm
21.96 mm
(4) M3x0.5-6H
3.5 mm deep
31 mm 42 mm M10x1.25
APPS17M-33 38.6 mm 255 g 33 Ncm 5.71
-4
Ncm-sec
2
Leadscrew End
Modifcation
.36 (9.1)
#22 AWG UL3265
12 in (305 mm)
External Nut
required for
Leadscrew Motor
.50
(12.7)
Actuator Housing
required for
Guided Linear
Actuator only
Encoder (optional)
available on:
Linear Actuator
Leadscrew Motor
Length
.70 Max
(18)
.50
(13)
2.70 ( 68.6)
.69
(17.5)
Precise. Quick.
The ElectroCraft NEMA 17 stepper-based linear actuator is reliable, made to be both precise and
responsive with positional accuracy in the microns, load capabilities up to 70 Lbs (32kg), and linear
speeds to 12 inches/second (305mm/second).
APPS17 & APPS17M : ElectroCraft AxialPower Plus | Stepper
NEMA 17, 1.8 47 (33) 20 (508) 70 (310)
0 = Linear Actuator
1 = Leadscrew Motor
ELECTROMATE
www.electromate.com
Sold & Serviced By:
Still need help?
A
P
P
S
Step 2: APPS17 & APPS17M Torque and Mechanical Data (Bipolar)
30
40
70
50
60
10
20
135
180
45
90
0 0
APPS17-47
APPS17M-33
0 5 (125) 10 (250) 15 (375) 20 (500)
0 3 (75) 6 (150) 9 (225) 12 (300)
80 360
315
270
225
Supply = 40 VDC x 2 amp/phase
= 24 VDC x 2 amp/phase
A B C
P
o
u
n
d
s
N
e
w
t
o
n
s 30
40
10
20
135
180
45
90
0 0
0 5 (125) 10 (250) 15 (375) 20 (500)
0 3 (75) 6 (150) 9 (225) 12 (300)
50 225
APPS17-29
APPS17M-21
Supply = 40 VDC x 2 amp/phase
= 24 VDC x 2 amp/phase
A B C
P
o
u
n
d
s
N
e
w
t
o
n
s
B
i
p
o
l
a
r
Imperial 29A10 29A15 29A20 47A10 47A15 47A20
Metric 21A10 21A15 21A20 33A10 33A15 10A20
Current Bipolar
(A/Phase)
1.0 1.5 2.0 1.0 1.5 2.0
Phase Resistance
(ohm)
3.8 1.90 0.95 4.9 2.4 1.2
Phase Inductance
(mH)
4.8 2.3 1.2 9.1 4.9 2.3
Curves are approximaned as straight line for ease of use. 29A20 (21A20) 47A20 (33A20)
Thread
Designation
Thread Lead
Inches (mm) / Rev
Linear Travel
Y Intercept
Pounds (N)
X Intercept
24 Volt
X Intercept
40 Volt
Y Intercept
Pounds (N)
X Intercept
24 Volt
X Intercept
40 Volt
J
*
1/4-40 UN (1S)
0.02500
(0.6)
0.00013
(0.0033)
40
(180)
1.35
(35)
2.25
(60)
80
(355)
1.00
(25)
1.68
(40)
V
*
1/4-32 ACME (1S)
0.03125
(0.8)
0.00016
(0.0041)
38
(170)
1.69
(40)
2.81
(70)
76
(340)
1.25
(30)
2.12
(55)
E
*
1/4-20 ACME (1S)
0.05000
(1.3)
0.00025
(0.0064)
37
(165)
2.70
(70)
4.50
(115)
74
(330)
2.00
(50)
3.38
(85)
A 1/4-16 ACME (1S)
0.06250
(1.6)
0.00031
(0.0079)
36
(160)
3.37
(85)
5.62
(140)
72
(320)
2.55
(65)
4.25
(110)
B 1/4-16 ACME (2S)
0.12500
(3.2)
0.00063
(0.0160)
30
(135)
6.75
(170)
11.25
(285)
60
(265)
5.00
(130)
8.44
(215)
F
*
1/4-20 ACME (4S)
0.20000
(5.1)
0.00100
(0.0254)
24
(105)
10.80
(275)
18.00
(460)
48
(215)
8.12
(205)
13.50
(340)
C 1/4-16 ACME (4S)
0.25000
(6.4)
0.00125
(0.0318)
20
(90)
13.50
(340)
22.5
(570)
40
(175)
10.12
(260)
16.88
(430)
Motor step rate calculation: Motor step rate (halfstep/sec) = [Speed (in/sec)*2] / [travel (in/fullstep)] Example B thread pitch: @ 2 in/sec = 6,420 halfsteps/sec
*
Consult factory for availability.
10
ELECTROMATE
www.electromate.com
Sold & Serviced By:
Size Holding Torque
oz-in (Ncm)
Linear Speed
Linear Force
Pounds (Newton)
Step 1: APPS23 Frame Size Drawing Key
Torque
Roter Inertia
A B C D E F G
Pilot
Length
Pilot
Diameter
Mount
Hole
Callout
Mount
Hole
Spacing
External
Flange
Dimension
External
Nut
Thread
Screw
End
Mod
APPS23-90
1.28 in
(32.5 mm)
7.0 oz
(200 g)
90 oz-in
(64 Ncm)
0.002 oz-in-sec
2

1.41
-3
Ncm-sec
2
0.06 in
(1.5 mm)
1.500
0.002 in
(38.1
0.05 mm)
0.205
0.01 in dia
(5.21
0.25 mm dia)
1.86 in
(47 mm)
2.22 in
(56 mm)
M17 x 1.0
1/4-28 UNF
M6 x 1.0
0.235 / 0.236 in
dia Journal
(5.97 / 5.99 mm)
APPS23-150
1.52 in
(38.6 mm)
9.0 oz
(255 g)
150 oz-in
(106 Ncm)
0.0035 oz-in-sec
2

2.47
-3
Ncm-sec
2
.50
(13)
.66
(17)
Leadscrew End
Modifcation
Encoder (optional)
available on:
Linear Actuator
Leadscrew Motor
Length
External Nut
required for
Leadscrew Motor
.42 (10.7)
.70
(17.8)
#22 AWG UL1061
12 in (305 mm)
2.70 ( 68.6)
Actuator Housing
required for
Guided Linear
Actuator only
1.00
(25.7)
Quick. Powerful.
The ElectroCraft NEMA 23 stepper-based linear actuator is reliable, made to be both
responsive and powerful, with positional accuracy in the microns, load capabilities up
to 175 Lbs (80kg) and linear speeds to 5 inches/second (130mm/second).
APPS23 : ElectroCraft AxialPower Plus | Linear Actuator Stepper
NEMA 23, 1.8 150 (106) 7.5 (190) 175 (780)
0 = Linear Actuator
1 = Leadscrew Motor
ELECTROMATE
www.electromate.com
Sold & Serviced By:
Still need help?
A
P
P
S
Step 2: APPS23 Torque and Mechanical Data (Bipolar)
100
125
50
25
75
444
555
150 666
222
111
333
0 0
0 2 (50) 4 (100) 6 (150) 8 (200)
0 1 (25) 2 (50) 3 (75) 4 (100)
175 777
APPS23-150
Step Angle = 1.8, 90 oz-in hold torque
P
o
u
n
d
s
N
e
w
t
o
n
s
Q S
80
100
40
20
60
360
450
180
90
270
0 0
0 2 (50) 4 (100) 6 (150) 8 (200)
0 1 (25) 2 (50) 3 (75) 4 (100)
120 540
APPS23-90
P
o
u
n
d
s
N
e
w
t
o
n
s
Q S
B
i
p
o
l
a
r
Imperial 90A10 90A20 90A30 150A10 150A20 150A30
Current Bipolar
(A/Phase)
1.0 2.0 3.0 1.0 2.0 3.0
Phase Voltage
VDC
5.8 3.0 1.8 7.9 3.8 2.4
Phase Resistance
(ohm)
5.78 1.50 0.60 7.92 1.90 0.80
Phase Inductance
(mH)
20.3 5.2 2.0 35.0 8.6 3.5
Motor step rate calculation: Motor step rate (halfstep/sec) = [Speed (in/sec)*2] / [travel (in/fullstep)] Example S thread pitch: @ 2 in/sec = 8,000 halfsteps/sec
Curves are approximaned as straight line for ease of use. 90A30 150A30
Thread
Designation
Thread Lead
Inches (mm) / Rev
Linear Travel
Y Intercept
Pounds (N)
X Intercept
24 Volt
X Intercept
40 Volt
Y Intercept
Pounds (N)
X Intercept
24 Volt
X Intercept
40 Volt
Q 3/8-20 ACME (1S)
0.050
(1.3)
0.00025
(0.0064)
109
(30)
2.8
(72)
5.6
(145)
157
(44)
1.9
(50)
3.8
(95)
T
*
3/8-16 ACME (1S)
0.063
(1.6)
0.00031
(0.0079)
104
(29)
3.5
(90)
7.0
(180)
151
(42)
2.3
(60)
4.7
(120)
W
*
3/8-12 ACME (1S)
0.063
(1.6)
0.00042
(0.0107)
97
(26)
4.7
(120)
9.4
(240)
142
(40)
3.1
(80)
6.3
(160)
S 3/8-10 ACME (1S)
0.100
(2.5)
0.00050
(0.0127)
92
(26)
5.6
(145)
11.2
(285)
130
(36)
3.8
(95)
7.5
(190)
L
*
3/8-12 ACME (2S)
0.167
(4.2)
0.00083
(0.0211)
75
(21)
9.4
(240)
18.8
(475)
106
(30)
6.3
(160)
12.5
(320)
*
Consult factory for availability.
12
ELECTROMATE
www.electromate.com
Sold & Serviced By:
Size Holding Torque
oz-in (Ncm)
Linear Speed
Linear Force
Pounds (Newton)
Step 1: L3S Frame Size Drawing Key
Torque
Roter Inertia
A B C D E F G
Pilot
Length
Pilot
Diameter
Mount
Hole
Callout
Mount
Hole
Spacing
External
Flange
Dimension
External
Nut
Thread
Screw
End
Mod
L3S-90
3.04 in
(77.2 mm)
65 oz
(1.8 kg)
396 oz-in
(280 Ncm)
0.002 oz-in-sec
2

2.8
-2
Ncm-sec
2
0.08 in
(2 mm)
2.875
0.001 in
(73
0.025 mm)
0.260
0.01 in dia
(6.6
0.25 mm dia)
2.74 in
(69.6 mm)
3.38 in
(86 mm)
M17 x 1.0
1/4-28 UNF
M6 x 1.0
0.2502 / 0.2499
in dia Journal
.63
(16.0)
Length
Leadscrew .45 (11.4) End
Modifcation
#22 AWG UL1061
12 in (305 mm)
.69
(17.5)
Encoder (optional)
available on:
Linear Actuator
Leadscrew Motor
.53 (13.5)
.66
(16.8)
.75 (19.1)
Powerful. Robust.
This NEMA 34 stepper-based linear actuator is the workhorse of linear motors. Made to move
your most demanding loads with dual front bearings capable of up handling 700 Lbs (320kg)
of linear force with precise resolution is a performance to be respected.
L3S : ElectroCraft 34 Frame | Linear Actuator Stepper
NEMA 34, 1.8 396 (280) 8.75 (225) 700 (3120)
ELECTROMATE
www.electromate.com
Sold & Serviced By:
Still need help?
L
3
Step 2: L3S Torque and Mechanical Data (Bipolar)
Thread
Designation
Thread Lead
Inches (mm) / Rev
Linear Travel
G 1/2-20 ACME (1S) 0.05 (1.3) 0.00025 (0.0064)
A 1/2-10 ACME (1S) 0.10 (2.5) 0.00050 (0.0127)
F 1/2-10 ACME (2S) 0.20 (5.1) 0.00100 (0.0254)
400
500
200
100
300
1800
2250
900
450
1350
0 0
0 2 (50) 4 (100) 6 (150) 8 (200)
0 1 (25) 2 (50) 3 (75) 4 (100)
700 3150
600 2700
L3SA
P
o
u
n
d
s
N
e
w
t
o
n
s
G A F
B
i
p
o
l
a
r
Imperial M200 M300 M500
Current Bipolar
(A/Phase)
2.0 3.0 5.0
Phase Voltage
VDC
5.0 3.0 2.0
Phase Resistance
(ohm)
2.50 1.00 0.40
Phase Inductance
(mH)
21.9 8.7 3.4
Uniploar winding available for OEM application upon request.
Motor step rate calculation: Motor step rate (halfstep/sec) = [Speed (in/sec)*2] / [travel (in/fullstep)] Example A thread pitch: @ 2 in/sec = 8,000 halfsteps/sec
14
ELECTROMATE
www.electromate.com
Sold & Serviced By:
Size Holding Torque
oz-in (Ncm)
Linear Speed
Linear Force
Pounds (Newton)
Size Peak Torque
oz-in (Ncm)
Linear Speed
Linear Force
Pounds (Newton)
Step 1: APPD15 & APPD15M Frame Size Drawing Key
Model Length Weight Peak
Torque
Constant
Stall
Torque
A B C D E F G
Pilot
Length
Pilot
Diameter
Mount
Hole
Callout
Mount
Hole
Spacing
External
Flange
Dimension
External
Nut
Thread
Screw
End
Mod
APPD15 3.99 in 22.4 oz 45 oz-in 10 oz-in 0.08 in
1.05
0.01 in
0.180 in dia
#8-32 tapped
see
diagram
2.74 x 1.54 in
3/8-40
UNS-2A
6-32 UNC
0.098/0.097 in
dia Journal
APPD15M 101.2 mm 0.63 kg 32 Ncm 7 Ncm 2 mm
26.67
0.25 mm
4.57 mm dia
M4X0.7 tapped
see
diagram
69.6 x 39.1 mm M10x7.5
M2.4x0.45
2.5 mm
dia Journal
.50
(12.7)
Leadscrew End
Modifcation
Length
1.16
(29.46)
.36 (9.1)
External Nut
required for
Leadscrew Motor
.49
(12.7)
.56 (14.22)
1.54
(39.1)
#16 AWG LEADS
8 in (203 mm)
Simple. Direct.
The ElectroCraft 15 frame PMDC based linear actuators offers a simple on/off control for direct axial
movement. Whether replacing an air cylinder, or introducing a simple electric actuator to your system,
this simple, low cost solution is a reliable alternative.
APPD15 & APPD15M : ElectroCraft AxialPower | Linear Actuator PMDC
15 FRAME 45 (32) 2.5 (64) 70 (315)
0 = Linear Actuator
1 = Leadscrew Motor
ELECTROMATE
www.electromate.com
Sold & Serviced By:
Still need help?
A
P
P
D
APPD15 & APPD15M : ElectroCraft AxialPower| Linear Actuator PMDC
*
24 Volt windings for OEM applications are available upon request.
Imperial 15V12
Metric 11V12
Voltage
(Vdc)
12.0
Voltage Constant
V/kRPM
3.2
Torque Constant
oz-in/A (Ncm/A)
4.3 (3)
Max Continuous Current
(A)
3.7
Peak Current
(A)
10.0
Step 2: APPD15 & APPD15M Torque and Mechanical Data (Bipolar)
Thread
Designation
Thread Lead
Inches (mm) / Rev
N 10-32 (1S) 0.03 (0.762)
R 10-32 (2S) 0.06 (1.524)
P 10-32 (4S) 0.13 (3.302)
40
50
20
10
30
180
225
90
45
135
0 0
0 1 (25) 2 (50) 3 (75) 4 (100)
70 315
60 270
APPD15-15
APPD15M-11
Supply Voltage = 12 Volts
P
o
u
n
d
s
N
e
w
t
o
n
s
CONTINUOUS
N R P
16
ELECTROMATE
www.electromate.com
Sold & Serviced By:
Size Holding Torque
oz-in (Ncm)
Linear Speed
Linear Force
Pounds (Newton)
Size Peak Torque
oz-in (Ncm)
Linear Speed
Linear Force
Pounds (Newton)
Step 1: APPD25 & APPD25M Frame Size Drawing Key
Model Length Weight Peak
Torque
Constant
Stall
Torque
A B C D E F G
Pilot
Length
Pilot
Diameter
Mount
Hole
Callout
Mount
Hole
Spacing
External
Flange
Dimension
External
Nut
Thread
Screw
End
Mod
APPD25 4.02 in 41.6 oz 142 oz-in 30 oz-in 0.08 in
1.25
0.005 in
#8-32 UNC-2B X
0.25 deep
1.414 in
(2.0 BC)
2.52 in
3/8-40
UNS-2A
10-32 UNC
0.196/195 in
dia Journal
APPD25M 102 mm 1.2 kg 100 Ncm 21 Ncm 2 mm
31.75
0.13 mm
M5x0.8 x 6.35mm
deep
35.91 mm
(50.8 BC)
64 mm M10x7.5
M5x0.8
4.98/4.95 mm
dia Journal"
.50
(13)
Leadscrew
Length
End
Modifcation
.36 (9.1)
External Nut
required for
Leadscrew Motor
.49
(12.7)
#14 AWG LEADS
8 in (203 mm)
Simple. Direct.
The ElectroCraft 25 frame PMDC based linear actuators offers a simple on/off control for direct axial
movement. Whether replacing an air cylinder, or introducing a simple electric actuator to your system,
this simple, low cost solution is a reliable alternative.
APPD25 & APPD25M : ElectroCraft AxialPower | Linear Actuator PMDC
25 FRAME 215 (152) 1.6 (40) 180 (810)
0 = Linear Actuator
1 = Leadscrew Motor
ELECTROMATE
www.electromate.com
Sold & Serviced By:
Still need help?
A
P
P
D
*
12 Volt windings for OEM applications are available upon request. More coarse threads (increased speed).
Imperial 25V12
*
25V24
Metric 18V12* 18V24
Voltage
(Vdc)
12.0 24.0
Voltage Constant
V/kRPM
3.3 6.6
Torque Constant
oz-in/A (Ncm/A)
4.4 (3.1) 8.9 (6.2)
Max Continuous Current
(A)
9.2 4.6
Peak Current
(A)
32.0 16.0
Step 2: APPD25 & APPD25M Torque and Mechanical Data (Bipolar)
Thread
Designation
Thread Lead
Inches (mm) / Rev
J 1/4-40 UNS-2A 0.03 (0.762)
E 1/4-20 ACME 0.05 (1.27)
A 1/4-16 ACME 0.06 (1.524)
100
125
50
25
75
440
550
220
110
330
0 0
0 1 (25) 2 (50) 3 (75) 4 (100)
175 770
150 660
APPD25-25
APPD25M-18
Supply Voltage = 24 Volts
P
o
u
n
d
s
N
e
w
t
o
n
s
CONTINUOUS
J E A
18
ELECTROMATE
www.electromate.com
Sold & Serviced By:
SA45 Outline Drawing
Model
A B C
Weight
oz (g)
Length in (mm) Width in (mm) Height in (mm)
SA4505
4.69 (119.0) 3.35 (85.0) 1.08 (28)
7.05 (200)
SA4510 7.76 (220)
SA45 : Electrocraft CompletePower | Stepper Drive
For Stepper Motors. Up to 480W.
This bipolar stepper drive provides microstepping to 1/16 built into a fully enclosed rugged aluminum case.
It can be DIN-rail mounted or panel mounted for fast integration. The mode of operation is set by simple DIP
switches. Features include an internal oscillator that allows operation of the drive at a internal speed set point
or with an external analog speed reference that can scale this set point. Both the 5 A and 10 A versions of this
drive can be powered by the same range of voltage supplies. This drive is protected against over-current and
overtemperature and incorporates the state of the art dual full bridge MOSFET driver for maximum effciency.
Connectivity is tool-free with RJ45-CAT5 plugs for the control inputs and push-type terminals for power.
Drive Model Example
Power Supply
Voltage
Nominal
Current
Phases
Operation Mode Special Functions
Fullstep
Micro
stepping
Integrated
Oscillator
Current
Fallback
Anti-Resonance
Anti-Noise
11 - 48 5 / 10 2
ELECTROMATE
www.electromate.com
Sold & Serviced By:
S
A
SA45 Specifcations
Model
Number
Power Supply Voltage
(VDC)
Nominal Current
(Amps)
Max. Power with
Heatsink (Watts)
Frequency of power
output stage (kHz)
Effciency
(%)
SA4505 11 - 48 5 240 50 95
SA4510 11 - 48 10 480 50 95
Control Inputs
Enable Optical, Ri = 1 kOhm; max. 20 mA
Direction Optical, Ri = 1 kOhm; max. 20 mA
Step Optical, Ri = 1 kOhm; max. 20 mA; 250 kHz
Speed ext. +1to +5 VDC; Ri = 100 kOhm
Switches
Microstep 1/1; 1/2; 1/4; 1/16
Current 0,5 A to 5 A / 1 A to 10 A
Fallback on / off
Oscillator on / off
Oscillator x8 on / off
Outputs
Auxiliary voltage source +5V +5 VDC / 50 mA
Fault Optical, max. 20 mA
Display
LEDs green= Power / red = Error
Function of Potentiometers
Speed Range: 4 Hz - 500kHz / 40 Hz - 4800 Hz
Ambient conditions
Operation temperature (C) -10 to +45
Storage temperature (C) -40 to +85
Humidity Range Not Condensing (%rel) 20 to 80 % rel.
Mode of Operation
Fullstep; Microstep: 1/2, 1/4, 1/16
Available Accessories for SA45 (details see page 36)
IA210x CAxxx HA3008 HA3018 HA3028 MA0025 WA2509
20
ELECTROMATE
www.electromate.com
Sold & Serviced By:
The information on these pages represents data that is preliminary in nature and is subject to change. Please contact the factory for the most current information.
SA49 Outline Drawing
Model
A B C
Weight
oz (g)
SA4905 4.69 (120.0) 3.35 (85.0) 1.08 (27.5) 7.76 (220)
SA49 : Electrocraft CompletePower | Stepper Drive
For Stepper Motors. Up to 450W.
This bipolar stepper drive provides microstepping to 1/16 built into a fully enclosed rugged aluminum case.
It can be DIN-rail mounted or panel mounted for fast integration. The mode of operation is set by simple
DIP switches. Features include an internal oscillator that allows operation of the drive at a internal speed
set point. The current setting, internal speed and ramp time can easily be selected using BCD input switches
then toggled into memory. This drive is protected against over-current and over-temperatureand incorporates
the state of the art dual full bridge MOSFET driver for maximum effciency. Connectivity is tool-free with
RJ45-CAT5 plugs for the control inputs and push-type terminals for power.
Drive Model Example
Power Supply
Voltage
Nominal
Current
Phases
Operation Mode Special Functions
Fullstep
Micro
stepping
Integrated
Oscillator
Current
Fallback
Anti-Resonance
Anti-Noise
24 - 90 5 2
ELECTROMATE
www.electromate.com
Sold & Serviced By:
The information on these pages represents data that is preliminary in nature and is subject to change.
Please contact the factory for the most current information.
S
A
Available Accessories for SA49 (details see page 36)
IA210x CAxxx HA3008 HA3018 HA3028 MA0025 WA2509
SA49 Specifcations
Model
Number
(VDC)
Nominal Current
(Amps)
Max. Power with
Heatsink (Watts)
Frequency of power
output stage (kHz)
Effciency
(%)
SA4905 24 - 90 5 450 50 95
Control Inputs
Enable Optical, Ri = 1 kOhm; max. 20 mA
Direction Optical, Ri = 1 kOhm; max. 20 mA
Step (250 kHz) Optical, Ri = 1 kOhm; max. 20 mA
Switches
Microstep 1/1; 1/2; 1/4; 1/16
Current Set idle / set
Fallback on / off
Speed Set idle / set
I/O voltage int / ext
Enable int / ext
BCD Select Speed / Current / Ramp
Outputs
Auxiliary voltage source +5V +5 VDC / 50 mA
Fault Optical, max. 20 mA
Display
LEDs green = Ready / red = Error
Function of Potentiometers
Speed Range: 1,5 Hz - 1,2 kHz / 12 Hz - 9,6 kHz
Ambient conditions
Mode of Operation
Fullstep; Microstep: 1/2, 1/4, 1/16
22
ELECTROMATE
www.electromate.com
Sold & Serviced By:
DA43 Outline Drawing
Model
A B C
Weight
oz (g)
DA4303 4.13 (105) 2.56 (65) 1.08 (28) 4.94 (140)
DA43 : Electrocraft CompletePower | Servo Amplifer
Power Supply
11 - 30 VDC
ElectroCraft Brushed DC Motor
with Tacho
For Brush-Commutated Linear PMDC Motors. Up to 75 W.
This servo-amplifer is built into a fully enclosed rugged miniature aluminum case. Linear servo amplifers are
ideal for low friction applications requiring high bandwidth, low noise and minimal distortion from the power
electronics. The drive can be confgured in the following modes of operation with simple dip switch settings:
I/R compensation, Tach mode, Voltage mode and Torque mode. Input power of 30 VDC combined with a
mountable heat-sink provides up to 75 Watts of power. Inputs include current limit, max set value and gain
functions. The drive handles continuous currents up to 3 A. The linear power stage is protected against over-
current and over-temperature.
Drive Model Example
Power Supply
Voltage
Nominal
Current
Quadrants
Operation Mode
Torque
Control
Analog
Pos.
Speed Control
I x R Comp. DC-Tacho Voltage Encoder
11 30 3 4
ELECTROMATE
www.electromate.com
Sold & Serviced By:
D
A
DA43 Specifcations
Model
Number
(VDC)
Aux. Voltage Verror
(VDC)
Nominal Current
(Amps)
Max. Power with
Heatsink (Watts)
Effciency
(%)
DA4303 11 - 30 5 - 30 3 75 97
Control Inputs
Set value -10 to +10 VDC; Ri = 20 kOhm
Imax 0 to +10 VDC; Ri > 10 kOhm
Tacho max. 50 VDC; Ri = 75 kOhm
Enable TTL/ +24 VDC; Ri = 47 kOhm
Ramp active LO; Ri = 100 kOhm
Switches
Tacho-, Voltage-, IxR-, Torque-Mode Not set / Set
Set value via Offset extern / intern
Outputs
Auxiliary voltage source +10 VDC / 10 mA each
Auxiliary voltage source +10 VDC / 10 mA each
Error TTL / 24 VDC; Ri = 50 Ohm
Display
LEDs green = Power / red = Error
Potentiometers
Function of Potentiometer Offset; nmax; Gain; IxR; Imax
Ambient conditions
Mode of Operation
Speed-control by voltage Torque-control IxR-compensation Speed-control by DC-tacho
Available Accessories for DA43 (details see page 36)
ASO-BM-70-30 CAxxxx MA0025 WA2509
HA2008 HA2018 HA2028
24
ELECTROMATE
www.electromate.com
Sold & Serviced By:
DA47 : Electrocraft CompletePower | Servo Amplifer
DA47 Outline Drawing
Model
A B C
Weight
oz (g)
DA4709
4.69 (119) 3.35 (85) 1.08 (28) 7.76 (220)
DA4718
Power Supply
11 - 30 VDC
ElectroCraft Brushed DC Motor
with Tacho
For Brush-Commutated PMDC Motors. Up to 1260 W.
This four-quadrant PWM brush DC servo amplifer is fully enclosed in a small, rugged aluminum case which
can be DIN-rail mounted or panel mounted for easy integration. The drive can be confgured in the following
modes of operation with simple dip switch settings: I/R compensation, Tach mode, Voltage mode and Torque
mode. Both the 9 A and 18 A versions have twice the rated current available as peak current for intermittent
overload conditions. This drive is protected against over-current and over-temperature and incorporates state
of the art MOSFET technology for maximum effciency. Connectivity is tool-free with RJ-45-connectors for
input/outputs and push-type terminals for supply power and motor connections.
Drive Model Example
Power Supply
Voltage
Nominal
Current
Quadrants
Operation Mode
Torque
Control
Analog
Pos.
Speed Control
11 70 9 / 18 4
ELECTROMATE
www.electromate.com
Sold & Serviced By:
D
A
DA47 Specifcations
Model
Number
Power Supply
Voltage (VDC)
Aux. Voltage
Verror (VDC)
Nominal Current
(Amps)
Peak current
(Amps)
Max. Power with
Heatsink (Watts)
Frequency of power
output stage (kHz)
Effciency
(%)
DA4709
11 - 70 5 - 30
9 18 630
50 95
DA4718 18 36 1260
Available Accessories for DA47 (details see page 36)
ASO-BM-70-30 IA210x CAxxxx HA3008 HA3018 HA3028 MA0025 WA2509
Control Inputs
Enable TTL/ +24 VDC; Ri = 4.7 kOhm
I Limit intern / extern
Ramp TTL / +24 VDC; Ri = 4.7 kOhm
Imax 0 to +10 VDC; Ri > 100 kOhm
Switches
Tacho-, Voltage-, IxR-, Torque-Mode Not set / Set
Set value via Offset extern / intern
I peak on / off
Outputs
Auxiliary voltage source +5 VDC / 50 mA
Auxiliary voltage sources 10 VDC / 20 mA
Monitor I 1 / 0.5 V/A; Ri = 100 Ohm
Monitor n 0.1 V / 1 Vmotor ; Ri = 100 Ohm
Supervisory output /Error Open Collector / Push Pull / TTL / +24V; Ri = 50 Ohm
Display
LEDs green = Power / red = Error
Potentiometers
Function of Potentiometer Offset; nmax; Gain; IxR; Imax
Ambient conditions
Mode of Operation
Speed-control by voltage Torque-control IxR-compensation Speed-control by DC-tacho
26
ELECTROMATE
www.electromate.com
Sold & Serviced By:
Power Supply
Voltage
Nominal
Current
Quadrants
Operation Mode
Torque
Control
Analog
Pos.
Speed Control
Model Power
Supply
Voltage
Nominal
Current
Quadrants
Operation Mode
Torque
Control
Analog
Pos.
Speed Control
SCA-L Outline Drawing
Model
A B C
Weight
oz (g)
SCA-LE-30-03
4.76 (121) 3.94 (100) 1.57 (40)
13.40 (380)
SCA-LS-30-03 11.64 (330)
SCA-L : Electrocraft CompletePower | Servo Amplifer
Power Supply
12 - 30 VDC
ElectroCraft
Brushed DC Motor
with Tacho
Power Supply
12 - 30 VDC
ElectroCraft
Brushed DC Motor
with Encoder
SCA-LE-30-03
ElectroCraft Servo Amplifer
SCA-LS-30-03
This linear four-quadrant brushless DC servo amplifer is fully enclosed in a rugged aluminum case which
can be panel mounted for easy integration. The drive is available in several confgurations depending on
your control requirements. The drive handles continuous currents up to 3 Amps and is protected against
over-current, over-temperature and motor short-circuit.
Drive Model Example
SCA-LE-30-03 11 30 3 4
SCA-LS-30-03 11 30 3 4
ELECTROMATE
www.electromate.com
Sold & Serviced By:
S
C
SCA-L Specifcations
Model
Number
(VDC)
Nominal Current
(Amps)
Max. Power with Heatsink
(Watts)
SCA-LE-30-03
11 - 30 3 75
SCA-LS-30-03
Control Inputs
Enable +8 to +30 VDC; Ri = 5 kOhm
Encoder input signals (SCA-LE only) Channel A & /A; B & /B; I & /I; max. 600 kHz ; TTL/ +5 to +24 VDC; Ri > 10 kOhm
Outputs
Auxiliary voltage source for encoder (SCA-LE only) +5 VDC / 100 mA
Auxiliary voltage source +3,9 VDC / 20 mA
Auxiliary voltage source -3,9 VDC / 20 mA
Auxiliary voltage source Enable +V Connected with 4.7 kOhm to +VCC
Error Open Collector max. +30 VDC; 20 mA
Display
LEDs green = OK / red = Fault
Potentiometers
Function of Potentiometer Gain; nmax; Imax; IxR; Offset
Ambient conditions
Mode of Operation
Available Accessories for SCA-L (details see page 36)
ASO-BM-70-30 ASX-RM-01-01
SCA-LE-30-03 Speed-control by Digital-Encoder
SCA-LS-30-03 Speed-control by voltage Torque-control IxR-compensation Speed-control by DC-tacho
28
ELECTROMATE
www.electromate.com
Sold & Serviced By:
Power Supply
Voltage
Nominal
Current
Quadrants
Operation Mode
Torque
Control
Analog
Pos.
Speed Control
Model Power
Supply
Voltage
Nominal
Current
Quadrants
Operation Mode
Torque
Control
Analog
Pos.
Speed Control
SCA-S : Electrocraft CompletePower | Servo Amplifer
SCA-S Outline Drawing
Model
A B C
Weight
oz (g)
SCA-SE-30-06
4.76 (121) 3.94 (100) 1.57 (40)
13.76 (390)
SCA-SS-30-06 12.00 (340)
This PWM four-quadrant brushless DC servo amplifer is fully enclosed in a rugged aluminum case which
can be panel mounted for easy integration. The drive is available in several confgurations depending on
your control requirements. The drive handles continuous currents up to 6 Amps and is protected against
over-current, over-temperature and motor short-circuit .
Power Supply
12 - 30 VDC
ElectroCraft
Brushed DC Motor
with Tacho
ElectroCraft
Brushed DC Motor
with Encoder
Power Supply
12 - 30 VDC
SCA-SE-30-06
SCA-SS-30-06
Drive Model Example
SCA-SE-30-06 11 30 6 4
SCA-SS-30-06 11 30 6 4
ELECTROMATE
www.electromate.com
Sold & Serviced By:
S
C
SCA-S Specifcations
Model
Number
(VDC)
Nominal Current
(Amps)
Max. Power with
Heatsink (Watts)
Frequency of power
output stage (kHz)
Effciency
(%)
SCA-SE-30-06
11 - 30 6 150 50 95
SCA-SS-30-06
SCA-SE-30-06 Speed-control by Digital-Encoder
SCA-SS-30-06 Speed-control by voltage Torque-control IxR-compensation Speed-control by DC-tacho
Available Accessories for SCA-S (details see page 36)
ASO-BM-70-30 ASX-RM-01-01 IA210x
Control Inputs
Enable +8 to +30 VDC; Ri = 5 kOhm
Encoder input signals (SCA-SE only) Channel A & /A; B & /B; I & /I; max. 600 kHz ; TTL/ +5 to +24 VDC; Ri > 10 kOhm
Outputs
Auxiliary voltage source +3.9 VDC / 20 mA
Auxiliary voltage source -3.9 VDC / 20 mA
Auxiliary voltage source for encoder (SCA-SE only) +5 VDC / 100 mA
Auxiliary voltage source Enable +V Connected with 27 kOhm to +VCC
Supervision output /Error Open Collector max. +30 VDC; 20 mA
Display
LEDs green = OK / red = Fault
Potentiometers
Function of Potentiometer Gain; nmax; Imax; IxR; Offset
Ambient conditions
Mode of Operation
30
ELECTROMATE
www.electromate.com
Sold & Serviced By:
Build Your Own ElectroCraft Motor
To Fit Your Exact Application
For the past 60 years, the global team at ElectroCraft
has helped engineers like you translate innovative
ideas into reality. To build on that legacy, we created
this Build-Your-Own ElectroCraft Motor web tool to
get you started with our technology.
GO FIGURE.
Customize your options ...
To easily fnd a motor / motion system
that best meets your needs:
Step 1: Select a base technology
Step 2: Select a model type & features
Step 3: Select a performance
Step 4: Select an electrical winding
Step 5: Select any options & accessories
A web confguration tool from ElectroCraft ... Go Figure!
Your Genius. Our Drive.
ELECTROMATE
www.electromate.com
Sold & Serviced By:
Still need help?
Linear Product Drive Models
Motor P/N Bipolar Stepper Drive PMDC Servo Drive
Imperial Metric
S
A
4
5
0
5
S
A
4
5
1
0
S
A
4
9
0
5
D
A
4
3
0
3
D
A
4
7
0
9
D
A
4
7
1
8
S
C
A
-
L
S
-
3
0
-
0
3
S
C
A
-
S
S
-
3
0
-
0
6
AxialPower
Stepper (APPS)
APPS11M-7A05
APPS11M-7A10
APPS11M-7A15
APPS11M-10A05
APPS11M-10A10
APPS11M-10A15
APPS17-29A10 APPS17M-21A10
APPS23-150A10 APPS23M-106A10
APPS23-150A20 APPS23M-106A20
APPS23-150A30 APPS23M-106A30
L3-Series
Stepper
L3SAF-M200
L3SAF-M300
L3SAF-M500
AxialPower
PMDC (APPD)
APPD15-10V120 APPD15M-7V120
APPD15-10V240 APPD15M-7V240
APPD25-30V120 APPD25M-21V120
APPD25-30V240 APPD25M-30V240
System Matrix - Matching Linear Product and Drive Combinations
32
ELECTROMATE
www.electromate.com
Sold & Serviced By:
Other Products available from
ElectroCraft:
CompletePower I Motion Control
TorquePower I Steppers
RapidPower I BLDC
DirectPower I PMDC
MobilePower I Transmissions
SolidPower Plus I Housed AC
SurePower I C-Frame AC
CompletePower I Drives
With meticulous engineering and advanced electronics,
our CompletePower speed controls and servo drives
offer reliability and precision servo motion control. From
sensitive medical dosing systems to rugged professional
power tools, our CompletePower devices can handle a
wide variety of applications.
AxialPower I Linear Actuator
PMDC, and BLDC motors, our family of AxialPower
linear actuators are built to last. Our unique approach to
linear motion with low-friction, polymer rotating nuts
and stainless steel leadscrews provides high force and
linear precision in the smallest packages available.
ELECTROMATE
www.electromate.com
Sold & Serviced By:
34
RapidPower I BLDC
Our BLDC motors provide the rapid
acceleration and consistent speed
needed for applications from
centrifuges to x-y positioning systems.
The RapidPower product line ensures
a steady operation at any speed by
utilizing sealed ball bearings and
reduced torque ripple from skewed
magnetization.
DirectPower I PMDC
Dynamically balanced armatures and
precision ball bearings ensure that the
DirectPower line maintains its char-
acteristically smooth performance.
This durable, totally enclosed, non-
ventilated (TENV) motor is available
in a broad product line from lower
cost, general purpose options to high
performance PMDC servo motors.
SolidPower Plus I Housed AC
High starting torques and stator
windings matched to your applica-
tion ensure the SolidPower product
provides lasting performance. The
dynamically balanced, skewed rotor
bars and precision-machined fts keep
vibration levels at a minimum.
SurePower I C-Frame AC
Our AC shaded-pole motor, the
SurePower product, can be utilized for
a wide range of air-moving
applications - perfect for the rigors
of refrigeration and commercial food
equipment applications.
TorquePower I Steppers
With non-cumulative position
accuracies as low as 3%, the
precision of our TorquePower motor
is matched only by the dependability
of its performance. Bi-directional
operation and enclosed, permanently
lubricated ball bearings provide long-
lasting, smooth operation.
MobilePower I Transmissions
With a choice of output ratios, our
MobilePower line of products helps
power battery-operated vehicles from
wheelchairs to lift trucks. And, to
increase durability and decrease noise
levels, the robust all metallic gears are
hobbed to a precision AGMA 9-Class.
ELECTROMATE
www.electromate.com
Sold & Serviced By:
34 35
Step 4: Features
0
Product
A
Thread
B
Screw Length
4
Screw End Mod
0
Lead Option
X
Encoder
Product Thread
0 Linear Actuator
Please refer to product pages. 1 Leadscrew Motor
2 Guided Linear Actuator
Screw Options End Mod Options Lead Options Encoder Options
# Length # Nominal Diameter End Modifcation Length of End Mod. # # Line count
X No leadscrew 1 screw 10-32 + 3/16 6-32 UNC 0.50 inch 0 fying leads X No Encoder
A 3.00 2 screw 10-32 + 3/16 M2.4 X 0.45 0.50 inch 1 connector G 250
B 6.00 3 screw 10-32 + 3/16 0.098/0.097 Dia [2.5mm] 0.50 inch H 400
C 12.00 4 screw 1/4 10-32 UNF 0.50 inch J 500
D 18.00 5 screw 1/4 M5 X 0.8 0.50 inch K 1000
E 24.00 6 screw 1/4 0.196/0.195 Dai [5mm] 0.50 inch L 2000
7 screw 3/8 1/4-28 UNF 0.50 inch M 5000
8 screw 3/8 M6 X 1.0 0.50 inch L 2000
9 screw 3/8 0.235/0.236 Dia [6mm] 0.50 inch M 5000
Encoder Specifcations for APPS11M, APPS17(M), APPS23 and L3S
Motor Size Encoder Line Count Motor Size Encoder Line Count Motor Size Encoder Line Count
APPS11M
H 400
APPS17
H 400
APPS23
L3S
H 400
K 1000 K 1000 K 1000
SHOWN AS ASSEMBLED UNIT SHOWN AS ASSEMBLED UNIT SHOWN AS ASSEMBLED UNIT
1.410
1.220
(0.100 Typ)
((5) 0.025
Square Pins)
1.630
0.705 0.815
1.190 1.240
0.640
1.800
0.610
(2) 0.125 Holes Thru
Pin 1
1.190
1.240
0.640
Pin 1
( 0.750 D.B.C.)
((2) 0.120)
( 1.100)
0.554
0.328 Thru Base
1.812
1.220
(0.100 Typ)
((5) 0.025
Square Pins)
1.190 1.240
0.640
1.800
0.610
(2) 0.109 Holes Thru
Pin 1
# Parameter # Parameter
Max Current
Draw
Typ Current
Draw
Supply
Voltage
Mating
Connector (Ref)
Contact
(Ref)
1 +5 VDC 1 Ground
85 ma 55 ma 5V
AMP P/N:
104257-4
AMP P/N
104480-4
2 Channel A 2 Index
3 Ground 3 Channel A
4 Channel B 4 +5 VDC
5 Channel B
Additional product features for OEM applications available upon request
ELECTROMATE
www.electromate.com
Sold & Serviced By:
Drive Accessories
Patch Cable
Aluminium Din Rail kit Braking module
Aluminium Din Rail kit with
L-shaped bracket for units:
SCA-Lx / SCA-Sx
(not used for SCA-SS-70-30)
P/N ASX-RM-01-01
Braking module in a
rugged aluminium case.
DA-Series
SCA-Series
P/N ASO-BM-70-30
Passive heatsink Passive heatsink
Passive heatsink optimized for drives:
DA43
P/N HA2008
Passive heatsink optimized for drives:
SA45
SA49
DA47
P/N HA3008
Fanned heatsink Fanned heatsink
One fan heatsink optimized for drives
(fan is 1 x 24 VDC, .8 W):
DA43
P/N HA2018
One fan heatsink optimized for drives
(fan is 1 x 24 VDC, .8 W):
SA45
SA49
DA47
P/N HA3018
Fanned heatsink Fanned heatsink
Two fan heatsink optimized for drives
(fans are 2 x 24 VDC, .8 W):
DA43
P/N HA2028
Two fan heatsink optimized for drives
(fans are 2 x 24 VDC, .8 W):
SA45
SA49
DA47
P/N HA3028
Choke module DIN Rail mounting kit
Choke module optimized for PMDC drives.
Inductance: IA2100 = 2x50 H; IA2101 = 2x100 H
Nominal current: 10 A
DA-Series
SCA-Series
P/N IA210x
DIN Rail mounting kit for units:
DA-Series
EA-Series
P/N MA0025
Break Out Board DIN Rail mounting kit
Break Out Board for:
DA-Series
EA-Series
P/N WA2509
DIN Rail mounting kit for:
ASO-BM-70-30
P/N MA3050
P/N 50cm 100cm 200cm 300cm
Red CA2005 CA2010 CA2020 CA2030
Yellow CA4005 CA4010 CA4020 CA4030
Gray CA8005 CA8010 CA8020 CA8030
36
ELECTROMATE
www.electromate.com
Sold & Serviced By:

Electrocraft Linear Motors Catalog

Uploaded by

Copyright:

Available Formats

Electrocraft Linear Motors Catalog

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Electrocraft Linear Motors Catalog

Uploaded by

Copyright:

Available Formats

Linear

You might also like