CSA Spec HILTI HIT 100 Technical Supplement

HIT-HY 100
Adhesive Anchor
Technical Supplement
Setting the standard for

performance and reliability.
Hilti. Outperform. Outlast.
Hilti.
Outperform.
Outlast.
Setting the standard

for performance and
reliability.
HIT-HY 100 Adhesive
Anchoring System
The new Hilti HIT-HY 100 Adhesive Anchoring
System is the latest addition to the fast cure
adhesive anchor portfolio and designed
for solid performance in a wide range of
applications. Designed to utilize the existing
Hilti dispenser platform and ICC-ES approved
for uncracked concrete, this anchor is the
perfect complement to the portfolio for day to
day jobsite needs.
Performance
ICC approved for uncracked concrete
Complete anchor system available, including HIT-V, HAS-E and HIS rods
Easy and accurate dispensing with battery dispenser
Reliability
Reliable fastenings using the traditional cleaning method (2x2x2)
Tested with wide range of rod diameters and embedments
Hilti Adhesive Anchors every job, every application.
HY 200 SAFEset
2
HY 200
HY 100
HY 10+
Hilti, Inc. (USA) 1-800-879-8000 I www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I HIT-HY 100 Technical Supplement 01/14
HIT-HY 100 Adhesive Anchoring System

HIT-HY100 Hybrid
Adhesive
Features and Applications
Technical Data
HIT-HY100
Anchoring light structural steel connections

(e.g. steel columns, beams)
Product
Hybrid Urethane
Methacrylate
Anchoring secondary steel elements
Base material
temperature*
14 F to 104 F
(-10 C to 40 C)
Rebar doweling and connecting secondary

post-installed rebar
Substituting misplaced or missing rebar
ICC approved for un-cracked concrete
Tested with a wide range of rod diameters
and embedments
Complete anchor system available,
including HIT-V rods, HAS-E rods and HIS
inserts
Easy and accurate dispensing with battery
dispenser
Working/Full Cure Time Table (Approximate)
Diameter range
3/8" to 1-1/4"
Listings/Approvals
ICC-ES (International Code Council)
ESR-3574 for un-cracked concrete
COLA (City of Los Angeles) (pending)
Package volume
V
olume of HIT-HY100 11.1 fl oz/330 ml foil pack
is 20.1 in3
Volume of HIT-HY100 16.9 fl oz/500 ml foil pack
is 30.5 in3
Base Material Temperature

F
twork
tcure
14 ... 22
-10 ... -5
3h
12 hrs
23 ... 31
-4 ... 0
40 min
4 hrs
32 ... 40
1 ... 5
20 min
2 hrs
41 ... 50
6 ... 10
8 min
60 min
51 ... 68
11 ... 20
5 min
30 min
69 ... 86
21 ... 30
3 min
30 min
87 ... 104
31 ... 40
2 min
30 min
Order Information
Description
Qty of foil packs
Item No.
HIT-HY 100 (11.1oz/330ml)
02078494
HIT-HY 100 Master Carton (11.1oz/330ml)
25
03510989
HIT-HY 100 Master Carton (11.1oz/330ml) + HDM 500
25
03510991
HIT-HY 100 Master Carton (16.9oz/500ml)
20
02078495
(2) HIT-HY 100 Master Cartons (16.9oz/500ml) + HDM 500
40
03511063
(2) HIT-HY 100 Master Cartons (16.9oz/500ml) + HDE 500 Kit
40
03511064
Accessories
Description
Item No.
HDM 500 Manual Dispenser
03498241
HDE 500 Compact Cordless Dispenser
03496606
HDE 500 Industrial Cordless Dispenser
03496605

1.0
Product Description
2.0
Technical Data
1.0 Product
Description
The Hilti HIT-HY100 Adhesive Anchoring

System is used to resist static, wind or
earthquake (Seismic Design Categories
A and B only) tension and shear loads
in normal-weight concrete having a
compressive strength, fc, of 2,500 psi
to 8,500 psi (17.2 MPa to 58.6 MPa).
It is suitable to be used in uncracked
concrete as defined per
ICC-ES, ACI, and CSA.
Listings/Approvals
ICC-ES (International Code Council)
ESR-3574
NSF/ANSI Standard 61
Certification for use of HIT-HY 100 in
potable water
Hilti HIT-HY100 Adhesive is an

injectable two-component hybrid
adhesive. The two components are
separated by means of a dual-cylinder
foil pack attached to a manifold. The two
components combine and react when
dispensed through a static mixing
nozzle attached to the manifold.
Independent Code
Evaluation
IBC/IRC 2009 (ICC-ES AC308)
LEED: Credit 4.1-Low Emitting Materials
Elements that are suitable for use with

this system are as follows: threaded
steel rods, Hilti HIS-(R)N steel internally
threaded inserts, and steel reinforcing
bars.
The Leadership in Energy and

Environmental Design (LEED) Green
Building Rating system is the nationally
accepted benchmark for the design,
construction, and operation of high
performance green buildings.
Hilti HIT-HY100 Adhesive Technical Data Table of Contents

Element Type
Rebar
Hilti HAS
Threaded Rod
Hilti HIS-N and HIS-RN Internally

Threaded Insert
United States
Canada
Pages
9 15
16 19
20 26
27 29
Tables
1 10
11 17
18 27
28 30
Information on Working Time and Cure Time on page 30

Information on Resistance of Cured Hilti HIT-HY 100 to Chemicals on page 30

2.0 Technical Data
2.1 T
esting and Product
Evaluation
HiltiHIT-HY100 has been tested in accordance with ICC

Evaluation Services (ICC-ES) Acceptance Criteria for PostInstalled Adhesive Anchors in Concrete Elements (AC308).
2.3 Design of HiltiHIT-HY100

Adhesive Anchor System
2.3.1 Using technical data in
ESR-3574
Technical data for the system components of HiltiHIT-HY100

can be found in ICC-ES ESR-3574. This includes:
Hilti has had HiltiHIT-HY100 evaluated according to AC308

and has received ESR-3574 from ICC-ES.
HiltiHIT-HY100 adhesive.
2.2 Adhesive Anchor Design

Codes
2.2.1 United States
HiltiHIS-(R)N internally threaded inserts.
For post-installed and cast-in anchor systems, design

calculations are performed according to ACI 318 Appendix D.
This has been a requirement of the International Building Code
(IBC) since 2003. ACI318-11 Appendix D introduced for the
first time specific equations for the design of adhesive anchor
systems using threaded rod or rebar. Prior to this only postinstalled expansion and undercut anchors and cast-in headed
studs were recognized.
Prior to the publication of ACI 318-11, designers of postinstalled adhesive anchor systems used ACI 318-08 Appendix
D and Section 3.3 of AC308 which provides amendments
to Appendix D. These amendments provide the relevant
equations to design a post-installed adhesive anchor.
At the time of this publication, ESR-3574 for HiltiHIT-HY100
includes the design provisions for ACI 318-08 and AC308
Section 3.3.
2.2.2 Canada
CSA A23.3-04 Annex D provides the required limit states

design equations for post-installed mechanical anchors, and
for cast-in headed studs. At the time of this publication, Annex
D, which is a non-mandatory part of the Canadian code, does
not address adhesive anchor design or test criteria.
Since Annex D does not provide guidance for the design of
adhesive anchor systems, it is the position of Hilti that the
design provisions of ACI 318-11 Appendix D can be used for
the design of Hilti HIT-HY100 in Canada. The foundations
of a proper adhesive anchor design are now well established
through ACI 318-11 and a proper chemical anchor design in
the United States would be also relevant in Canada. It will be
shown in later sections how to relate the results from technical
data in this supplement to the Canadian design standard.
Standard threaded rods and rebar.

A designer can use the data in ESR-3574 to calculate the
capacity of the HiltiHIT-HY100 system in the following manner:
For standard threaded rods, rebar and the HiltiHIS-(R)N
internally threaded inserts, a design using either ACI 318-11
Appendix D or ACI 318-08 Appendix D and AC308 Section
3.3 amendments to ACI 318 would be appropriate.
The tables from ESR-3574 are not included in this supplement,
but can be found by downloading ESR-3574 from
www.us.hilti.com or on the ICC-ES website at www.icc-es.org,
or by contacting your local Hilti representative.
2.3.2 Using the New Hilti

Simplified Design Tables
In lieu of providing a copy of ESR-3574 design tables in this

supplement, Hilti is providing a new, simple approach for
designing an anchor according to the current codes described
in Section 2.2. Refer to Section 2.4 for a description of these
new innovative tables.
2.4 Hilti Simplified Design Tables

The Hilti Simplified Design Tables is not a new method of
designing an anchor that is different than the provisions of ACI
318 Appendix D or CSA A23.3 Annex D. Rather, it is a series
of pre-calculated tables and reduction factors meant to help
the designer create a quick calculation of the capacity of the
Hilti anchor system, and still be compliant with the codes and
criteria of ACI and CSA.
The Hilti Simplified Design Tables are formatted similar to the
Allowable Stress Design (ASD) tables and reduction factors
which was a standard of practice for design of post-installed
anchors.
The Hilti Simplified Design Tables combine the simplicity of
performing a calculation according to the ASD method with the
code-required testing, evaluation criteria and technical data in
ACI Appendix D and CSA Annex D.

2.4.1 Simplified Tables Data
Development
The Simplified Tables have two table types. The single anchor
capacity table and the reduction factor table.
Single anchor capacity tables show the design strength (for
ACI) or factored resistance (for CSA) in tension and shear for a
single anchor. This is the capacity of a single anchor with no
edge distance or concrete thickness influences and is based
on the assumptions outlined in the footnotes below each table.
Reduction factor tables are created by comparing the single
anchor capacity to the capacity that includes the influence of a
specific edge distance, spacing, or concrete thickness, using
the equations of ACI 318-11 Appendix D.
The single anchor tension capacity is based on the lesser of
concrete breakout strength or bond strength:

ACI:
Nn = min | Ncb ;Na |
CSA/ACI:
Nr = min | Ncbr ;Na |

Nn = Nr
Tension:
ACI:
Ndes = n min | Nn fAN fRN ; Nsa |
CSA:
Ndes = n min | Nr fAN fRN ; Nsr |
Shear:
ACI:
Vdes =
n min | Vn fAV fRV fHV ; Vsa |
CSA:
Vdes =
n min | Vr fAV fRV fHV ; Vsr |
where:

The shear value is based on the pryout strength.

ACI:
Vn = Vcp
CSA/ACI:
Vr = Vcpr

Vn = Vr
Concrete breakout is calculated according to ACI 318
Appendix D and CSA A23.3 Annex D using the variables from
ESR-3574. These values are equivalent.
Bond strength is not recognized in CSA, so this is determined
from ACI 318-11 Appendix D for both the US and Canada.
2.4.2 Steel Strength for All

Elements
The steel strength is provided on a separate table and is based

on calculations from ACI 318 Appendix D and CSA A23.3
Annex D. ACI and CSA have different reduction factors for steel
strength, thus the values for both ACI and CSA are published.
2.4.3 How to Calculate Anchor

Capacity Using Simplified
Tables
The process for calculating the capacity of a single anchor

or anchor group is similar to the ASD calculation process
currently outlined in the 2011 North American Product
Technical Guide Volume 2: Anchor Fastening Technical Guide
on page 19.
n =
number of anchors
Ndes = design resistance in tension
Nn = design strength in tension considering
concrete breakout, pullout, or bond failure
(ACI)
Nsa = design strength in tension considering steel
failure (ACI)
Nr = factored resistance in tension considering
concrete breakout, pullout, or bond failure
(CSA)
Nsr = factored resistance in tension considering
steel failure (CSA)
Vdes = design resistance in shear
Vn = design strength in shear considering
concrete failure (ACI)
Vsa = design strength in shear considering steel
failure (ACI)
Vr = factored resistance in shear considering
concrete failure (CSA)
Vsr = factored resistance in shear considering steel
failure (CSA)
fAN = adjustment factor for spacing in tension
fRN = adjustment factor for edge distance in tension
fAV =
adjustment factor for spacing in shear
fRV = adjustment factor for edge distance in shear
fHV = adjustment factor for concrete thickness in
shear (this is a new factor that ASD did not
use previously)
Adjustment factors are applied for all applicable near edge and
spacing conditions.
For example, the capacity in tension corresponding to the
anchor group based on worst case anchor a in the figure
below is evaluated as follows:
ACI:
Ndes = 4 Nn fA,x fA,y fR,x fR,y
CSA:
Ndes = 4 Nr fA,x fA,y fR,x fR,y
The design strength (factored resistance) of an anchor is

obtained as follows:

2.4.4 Allowable Stress Design
(ASD)
The values of Ndes and Vdes developed from Section 2.4.3

are design strengths (factored resistances) and are to be
compared to the required strength in tension and shear from
factored load combinations of ACI 318 Chapter 9 or CSA A23.3
Chapter 8.
Note: designs are for orthogonal anchor bolt patterns and no

reduction factor for the diagonally located adjacent anchor is
required.
Where anchors are loaded simultaneously in tension and shear,
interaction must be considered. The interaction equation is as
follows:

Nua
Vua
____
ACI:
+ ____ 1.2
N
Vdes
des

Vf
Nf
____
CSA:
+ ____ 1.2
Ndes
Vdes

where:

Nua = Required strength in tension based on

factored load combinations of ACI 318
Chapter 9.
Vua = Required strength in shear based on factored
load combinations of ACI 318 Chapter 9.
Nf = Required strength in tension based on
factored load combinations of CSA A23.3
Chapter 8.
Vf = Required strength in shear based on factored
load combinations of CSA A23.3 Chapter 8.
The full tension strength can be permitted if:

Vua
_____
ACI:
0.2
V
des

Vf
____
CSA:
0.2
Vdes
The design strength (factored resistance) can be converted to

an ASD value as follows:

Ndes

Ndes,ASD = _____
ASD

Vdes

Vdes,ASD = _____
ASD
where:

ASD = Conversion factor calculated as a weighted
average of the load factors for the controlling
load combination.
An example for the calculation of ASD is as follows:
Controlling strength design load combination is 1.2D
+ 1.6L, % contribution is 30% D, 70% L

ASD =
1.2 x 0.30 + 1.6 x 0.70 = 1.48
2.4.5 Sustained Loads and

Overhead Use
Sustained loading is calculated by multiplying the value of Nn

or Nr by 0.55 and comparing the value to the tension dead
load contribution (and any sustained live loads or other loads)
of the factored load. Edge, spacing, and concrete thickness
influences do not need to be accounted for when evaluating
sustained loads.
Consideration of sustained loads is based on ACI 318-11
Appendix D. Since sustained loading is not addressed in CSA
A23.3 Annex D, it is reasonable to use this approach for CSA
based designs.
2.4.6 Accuracy of the Simplified

Tables
Calculations using the Simplified Tables have the potential of

providing a design strength (factored resistance) that is exactly
what would be calculated using equations from ACI 318
Appendix D or CSA A23.3 Annex D.
The tables for the single anchor design strength (factored

resistance) for concrete / bond / pullout failure or steel
failure have the same values that will be computed using the
provisions of ACI and CSA.
The full shear strength can be permitted if:

Nua
____
ACI:
0.2
Ndes

Nf
____
CSA:
0.2
Ndes
The load adjustment factors for edge distance influences are


based on a single anchor near an edge. The load adjustment
factors for spacing are determined from the influence of two
adjacent anchors. Each reduction factor is calculated for the
minimum value of either concrete or bond failure. When more
than one edge distance and/or spacing condition exists, the
load adjustment factors are multiplied together. This will result
in a conservative design when compared to a full calculation
based on ACI or CSA. Additionally, if the failure mode in the
single anchor tables is controlled by concrete failure, and the
reduction factor is controlled by bond failure, this will also give
a conservative value (and vice versa).
The following is a general summary of the accuracy of the
simplified tables:
S
ingle anchor tables have values equivalent to a
calculation according to ACI or CSA.
S
ince the table values, including load adjustment factors,
are calculated using equations that are not linear, linear
interpolation is not permitted. Use the smaller of the two
table values listed. This provides a conservative value
if the application falls between concrete compressive
strengths, embedment depths, or spacing, edge
distance, and concrete thickness.
F
or one anchor near one edge, applying the edge
distance factor typically provides accurate values
provided the failure mode of the table values is the
same. If the failure mode is not the same, the values are
conservative.
F
or two to four anchors in tension with no edge
reductions, applying the spacing factors provides a value
that is equivalent to the ACI and CSA calculated values,
provided the controlling failure modes of the table values
are the same. If the failure mode is not the same, the
values are conservative.
T
he spacing factor in shear is conservative when
compared to two anchors with no edge distance
considerations. This factor is based on spacing near
an edge and can be conservative for installations away
from the edge of the concrete member. Note: for less
conservative results, it is possible to use the spacing
factor in tension for this application if there is no edge
distance to consider.
T
he concrete thickness factor in shear is conservative
when compared to an anchor with no edge influences.
This factor is based on applications near an edge. In the
middle of a concrete member this is conservative. Note:
for less conservative results, this factor can be ignored if
the application is not near an edge.
The load adjustment factors are determined by

calculations according to ACI 318-11 Appendix D. This is
more conservative than ACI 318-08 Appendix D because
the g,Na factor, which is always greater than or equal to
1.0, does not need to be calculated.
IMPORTANT NOTE:
For applications such as a four bolt or six bolt anchor pattern
in a corner in a thin slab, the calculation can be up to 80%
conservative when compared to a calculation according to ACI
or CSA. It is always suggested to perform a calculation by hand
using the provisions of ACI and CSA to optimize the design.
This is especially true when the Simplified Table calculation
does not provide a value that satisfies the design requirements.
The fact that a Simplified Table calculation does not exceed a
design load does not mean the HIT-HY100 Adhesive system
will not fulfill the design requirements. Additional assistance
can be given by your local Hilti representative.
2.4.7 Limitations Using

Simplified Tables
There are additional limitations that the Simplified Tables do

not consider:
Load Combinations: Table values are meant to be used
with the load combinations of ACI 318 Section 9.2 and
CSA A23.3 Chapter 8.
Supplementary Reinforcement: Table values, including
reduction factors, are based on Condition B which does
not consider the effects of supplementary reinforcement,
nor is there an influence factor that can be applied to
account for supplementary reinforcement.
Eccentric loading: Currently, there is not a method for
applying a factor to the tables to account for eccentric
loading.
Moments or Torsion: While a designer can apply a
moment or torsion to the anchor system and obtain a
specific load per anchor, the tables themselves do not
have specific factors to account for moments or torsion
applied to the anchor system.
Standoff: Standoff is not considered in the steel design
tables.
Anchor layout: The Simplified Tables assume an
orthogonal layout.
There may be additional applications not noted above. Contact
Hilti with any questions for specific applications.

2.4.8 Hilti HIT-HY100 Adhesive
with Deformed Reinforcing
Bars (Rebar)
Dry
Concrete
Uncracked
Concrete
Water Saturated
Concrete
US Rebar Installation Specifications
Rebar
Size
#3
#4
Standard
Embed.
Depth
Embed.
Depth
Range
Minimum
Base
Material
Thickness
d
in
hef std
in (mm)
hef
in (mm)
hmin
in (mm)
3-3/8
(86)
4-1/2
(114)
5-5/8
(143)
6-3/4
(171)
7-7/8
(200)
9
(229)
10-1/8
(257)
11-1/4
(286)
2-3/8 7-1/2
(60 191)
2-3/4 10
(70 254)
3-1/8 12-1/2
(79 318)
3-1/2 15
(89 381)
3-1/2 17-1/2
(89 445)
4 20
(102 508)
4-1/2 22-1/2
(114 572)
5 25
(127 635)
5/8
#5
3/4
#6
7/8
#7
#8
1-1/8
#9
1-3/8
#10
1-1/2
Hammer Drilling with Carbide

Tipped Drill Bit
Canadian Rebar Installation Specifications
Drill
Bit
Dia.
1/2
Permissible
Drilling
Method
Permissible
Concrete
Conditions
Rebar Installation Conditions
hef + 1-1/4
(hef + 30)
Drill
Bit
Dia.
Standard
Embed.
Depth
Embed.
Depth
Range
Minimum
Base
Material
Thickness
d
in
hef std
mm
hef
mm
hmin
mm
10 M
9/16
115
70 226
hef + 30
Rebar
Size
15 M
3/4
145
80 320
20 M
200
90 390
25 M
1-1/4
230
101 504
30 M
1-1/2
260
120 598
hef + 2d0
hef + 2d0

Table 1 Hilti HIT-HY 100 Adhesive Design Strength (Factored Resistance) with Concrete / Bond Failure for US Rebar
in Uncracked Concrete 1,2,3,4,5,6,7,8
Nominal
Rebar Size
#3
#4
#5
#6
#7
#8
#9
#10
1
2
3
4
5
6
7
8
Tension Nn or Nr
Shear Vn or Vr
Effective
Embedment
Depth
in. (mm)
fc = 2500 psi
(17.2 Mpa)
lb (kN)
fc = 3000 psi
(20.7 Mpa)
lb (kN)
fc = 4000 psi
(27.6 Mpa)
lb (kN)
fc = 6000 psi
(41.4 Mpa)
lb (kN)
fc = 2500 psi
(17.2 Mpa)
lb (kN)
fc = 3000 psi
(20.7 Mpa)
lb (kN)
fc = 4000 psi
(27.6 Mpa)
lb (kN)
fc = 6000 psi
(41.4 Mpa)
lb (kN)
3-3/8
(86)
4-1/2
(114)
7-1/2
(191)
4-1/2
(114)
6
(152)
10
(254)
5-5/8
(143)
7-1/2
(191)
12-1/2
(318)
6-3/4
(171)
9
(229)
15
(381)
7-7/8
(200)
10-1/2
(267)
17-1/2
(445)
9
(229)
12
(305)
20
(508)
10-1/8
(257)
13-1/2
(343)
22-1/2
(572)
11-1/4
(286)
15
(381)
25
(635)
3,155
(14.0)
4,205
(18.7)
7,005
(31.2)
5,605
(24.9)
7,475
(33.3)
12,455
(55.4)
8,760
(39.0)
11,680
(52.0)
19,465
(86.6)
12,610
(56.1)
16,815
(74.8)
28,025
(124.7)
17,165
(76.4)
22,890
(101.8)
38,150
(169.7)
21,060
(93.7)
29,895
(133.0)
49,825
(221.6)
24,010
(106.8)
32,015
(142.4)
53,360
(237.4)
29,430
(130.9)
39,525
(175.8)
65,875
(293.0)
3,155
(14.0)
4,205
(18.7)
7,005
(31.2)
5,605
(24.9)
7,475
(33.3)
12,455
(55.4)
8,760
(39.0)
11,680
(52.0)
19,465
(86.6)
12,610
(56.1)
16,815
(74.8)
28,025
(124.7)
17,165
(76.4)
22,890
(101.8)
38,150
(169.7)
22,420
(99.7)
29,895
(133.0)
49,825
(221.6)
24,010
(106.8)
32,015
(142.4)
53,360
(237.4)
29,645
(131.9)
39,525
(175.8)
65,875
(293.0)
3,155
(14.0)
4,205
(18.7)
7,005
(31.2)
5,605
(24.9)
7,475
(33.3)
12,455
(55.4)
8,760
(39.0)
11,680
(52.0)
19,465
(86.6)
12,610
(56.1)
16,815
(74.8)
28,025
(124.7)
17,165
(76.4)
22,890
(101.8)
38,150
(169.7)
22,420
(99.7)
29,895
(133.0)
49,825
(221.6)
24,010
(106.8)
32,015
(142.4)
53,360
(237.4)
29,645
(131.9)
39,525
(175.8)
65,875
(293.0)
3,340
(14.9)
4,455
(19.8)
7,425
(33.0)
5,940
(26.4)
7,920
(35.2)
13,205
(58.7)
9,285
(41.3)
12,380
(55.1)
20,630
(91.8)
13,370
(59.5)
17,825
(79.3)
29,710
(132.2)
18,195
(80.9)
24,260
(107.9)
40,435
(179.9)
23,765
(105.7)
31,690
(141.0)
52,815
(234.9)
25,450
(113.2)
33,935
(150.9)
56,560
(251.6)
31,425
(139.8)
41,895
(186.4)
69,830
(310.6)
6,790
(30.2)
9,055
(40.3)
15,090
(67.1)
12,075
(53.7)
16,100
(71.6)
26,830
(119.3)
18,865
(83.9)
25,150
(111.9)
41,920
(186.5)
27,165
(120.8)
36,220
(161.1)
60,365
(268.5)
36,975
(164.5)
49,300
(219.3)
82,165
(365.5)
45,360
(201.8)
64,390
(286.4)
107,315
(477.4)
54,125
(240.8)
81,495
(362.5)
135,825
(604.2)
63,395
(282.0)
97,600
(434.1)
167,685
(745.9)
6,790
(30.2)
9,055
(40.3)
15,090
(67.1)
12,075
(53.7)
16,100
(71.6)
26,830
(119.3)
18,865
(83.9)
25,150
(111.9)
41,920
(186.5)
27,165
(120.8)
36,220
(161.1)
60,365
(268.5)
36,975
(164.5)
49,300
(219.3)
82,165
(365.5)
48,295
(214.8)
64,390
(286.4)
107,315
(477.4)
59,290
(263.7)
81,495
(362.5)
135,825
(604.2)
69,445
(308.9)
100,610
(447.5)
167,685
(745.9)
6,790
(30.2)
9,055
(40.3)
15,090
(67.1)
12,075
(53.7)
16,100
(71.6)
26,830
(119.3)
18,865
(83.9)
25,150
(111.9)
41,920
(186.5)
27,165
(120.8)
36,220
(161.1)
60,365
(268.5)
36,975
(164.5)
49,300
(219.3)
82,165
(365.5)
48,295
(214.8)
64,390
(286.4)
107,315
(477.4)
61,120
(271.9)
81,495
(362.5)
135,825
(604.2)
75,455
(335.6)
100,610
(447.5)
167,685
(745.9)
7,200
(32.0)
9,600
(42.7)
15,995
(71.1)
12,800
(56.9)
17,065
(75.9)
28,440
(126.5)
19,995
(88.9)
26,660
(118.6)
44,435
(197.7)
28,795
(128.1)
38,395
(170.8)
63,990
(284.6)
39,190
(174.3)
52,255
(232.4)
87,095
(387.4)
51,190
(227.7)
68,255
(303.6)
113,755
(506.0)
64,785
(288.2)
86,385
(384.3)
143,970
(640.4)
79,985
(355.8)
106,645
(474.4)
177,745
(790.6)
See Section 2.4 for explanation on development of load values.

See Section 2.4.4 to convert design strength (factored resistance) value to ASD value.
Linear interpolation between embedment depths and concrete compressive strengths is not permitted.
Apply spacing, edge distance, and concrete thickness factors in tables 3 - 10 as necessary. Compare to the steel values in table 2.
The lesser of the values is to be used for the design.
Data is for temperature range A: Max. short term temperature = 104 F (40 C), max. long term temperature = 75 F (24 C).
For temperature range B: Max. short term temperature = 176 F (80 C), max. long term temperature = 122 F (50 C) multiply above value by 0.83.
For temperature range C: Max. short term temperature = 248 F (120 C), max. long term temperature = 162 F (72 C) multiply above value by 0.48.
Short term elevated concrete temperatures are those that occur over brief intervals, e.g., as a result of diurnal cycling. Long term concrete temperatures are roughly constant over significant
periods of time.
Tabular values are for dry and water-saturated concrete conditions.
Tabular values are for short term loads only. For sustained loads including overhead use, see Section 2.4.5.
Tabular values are for normal weight concrete only. For lightweight concrete multiply design strength (factored resistance) by a as follows:
For sand-lightweight, a = 0.51. For all-lightweight, a = 0.45.
10

Table 2 Steel Design Strength (ACI 318 Appendix D Based Design) for US Rebar 3
ASTM A 615 Grade 40 4
Nominal
Rebar Size
#3
#4
#5
#6
#7
#8
#9
#10
1
2
3
4
Tensile
Nsa
lb (kN)
Shear
Vsa
lb (kN)
Tensile
Nsa
lb (kN)
Shear
Vsa
lb (kN)
Tensile1
Nsa
lb (kN)
Shear2
Vsa
lb (kN)
4,290
(19.1)
7,800
(34.7)
12,090
(53.8)
17,160
(76.3)
23,400
(104.1)
30,810
(137.0)
39,000
(173.5)
49,530
(220.3)
2,375
(10.6)
4,320
(19.2)
6,695
(29.8)
9,505
(42.3)
12,960
(57.6)
17,065
(75.9)
21,600
(96.1)
27,430
(122.0)
6,435
(28.6)
11,700
(52.0)
18,135
(80.7)
25,740
(114.5)
35,100
(156.1)
46,215
(205.6)
58,500
(260.2)
74,295
(330.5)
3,565
(15.9)
6,480
(28.8)
10,045
(44.7)
14,255
(63.4)
19,440
(86.5)
25,595
(113.9)
32,400
(144.1)
41,150
(183.0)
6,600
(29.4)
12,000
(53.4)
18,600
(82.7)
26,400
(117.4)
36,000
(160.1)
47,400
(210.8)
60,000
(266.9)
76,200
(339.0)
3,430
(15.3)
6,240
(27.8)
9,670
(43.0)
13,730
(61.1)
18,720
(83.3)
24,650
(109.6)
31,200
(138.8)
39,625
(176.3)
Tensile = Ase,N futa as noted in ACI 318 Appendix D

Shear = 0.60 Ase,N futa as noted in ACI 318 Appendix D
ASTM A706 Grade 60 rebar are considered ductile steel elements. ASTM A 615 Grade 40 and 60 rebar are considered brittle steel elements.
Table 3 Load Adjustment Factors for #3 US Rebar in Uncracked Concrete 1,2
Spacing (s) / Edge Distance (ca) / Concrete Thickness (h), in (mm)
#3
Uncracked Concrete
1
2
3
4
Embedment hef
in (mm)
1-3/4
(44)
1-7/8
(48)
2
(51)
3
(76)
3-5/8
(92)
4
(102)
4-5/8
(117)
5
(127)
5-3/4
(146)
6
(152)
7
(178)
8
(203)
8-3/4
(222)
9
(229)
10
(254)
11
(279)
12
(305)
14
(356)
16
(406)
18
(457)
24
(610)
30
(762)
36
(914)
>48
(1219)
Spacing Factor in
Tension
fAN
3-3/8
(86)
n/a
0.59
0.60
0.65
0.68
0.70
0.73
0.75
0.78
0.80
0.85
0.90
0.93
0.94
0.99
1.00
4-1/2
(114)
n/a
0.57
0.57
0.61
0.63
0.65
0.67
0.69
0.71
0.72
0.76
0.80
0.82
0.83
0.87
0.91
0.94
1.00
7-1/2
(191)
n/a
0.54
0.54
0.57
0.58
0.59
0.60
0.61
0.63
0.63
0.66
0.68
0.69
0.70
0.72
0.74
0.77
0.81
0.86
0.90
1.00
Edge Distance Factor

in Tension
fRN
3-3/8
(86)
0.32
0.33
0.34
0.43
0.49
0.53
0.60
0.65
0.75
0.78
0.91
1.00
4-1/2
(114)
0.23
0.24
0.25
0.31
0.36
0.38
0.44
0.48
0.55
0.57
0.67
0.76
0.83
0.86
0.95
1.00
7-1/2
(191)
0.13
0.14
0.14
0.18
0.21
0.22
0.25
0.28
0.32
0.33
0.39
0.44
0.48
0.50
0.55
0.61
0.66
0.77
0.88
0.99
1.00
Spacing Factor in
Shear3
fAV
3-3/8
(86)
n/a
0.54
0.54
0.57
0.58
0.59
0.60
0.61
0.62
0.63
0.65
0.67
0.69
0.70
0.72
0.74
0.76
0.80
0.85
0.89
1.00
4-1/2
(114)
n/a
0.53
0.54
0.55
0.56
0.57
0.58
0.59
0.60
0.61
0.63
0.64
0.66
0.66
0.68
0.70
0.71
0.75
0.79
0.82
0.93
1.00
7-1/2
(191)
n/a
0.52
0.53
0.54
0.55
0.55
0.56
0.56
0.57
0.58
0.59
0.60
0.61
0.61
0.63
0.64
0.65
0.68
0.70
0.73
0.81
0.88
0.96
1.00
Edge Distance in Shear
Toward Edge
To Edge
fRV
fRV
3-3/8 4-1/2 7-1/2 3-3/8 4-1/2
(86)
(114) (191)
(86)
(114)
0.11
0.08
0.05
0.22
0.16
0.12
0.09
0.05
0.24
0.18
0.13
0.10
0.06
0.27
0.20
0.24
0.18
0.11
0.46
0.37
0.32
0.24
0.15
0.52
0.42
0.38
0.28
0.17
0.55
0.45
0.47
0.35
0.21
0.62
0.49
0.52
0.39
0.24
0.65
0.51
0.65
0.48
0.29
0.75
0.57
0.69
0.52
0.31
0.78
0.59
0.87
0.65
0.39
0.91
0.67
1.00
0.80
0.48
1.00
0.76
0.91
0.55
0.83
0.95
0.57
0.86
1.00
0.67
0.95
0.77
1.00
0.88
1.00
Conc. Thickness
Factor in Shear4
fHV
7-1/2
(191)
0.10
0.11
0.12
0.22
0.29
0.34
0.36
0.37
0.40
0.41
0.45
0.48
0.51
0.52
0.57
0.61
0.66
0.77
0.88
0.99
1.00
3-3/8
(86)
n/a
n/a
n/a
n/a
n/a
n/a
0.63
0.66
0.71
0.72
0.78
0.83
0.87
0.88
0.93
0.98
1.00
4-1/2
(114)
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.64
0.66
0.71
0.76
0.79
0.80
0.85
0.89
0.93
1.00
7-1/2
(191)
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.67
0.68
0.71
0.75
0.78
0.84
0.90
0.96
1.00
Linear interpolation not permitted

Shaded area with reduced edge distance is permitted provided rebar has no installation torque.
Spacing factor reduction in shear, fAV, assumes an influence of a nearby edge. If no edge exists, then fAV = fAN.
Concrete thickness reduction factor in shear, fHV, assumes an influence of a nearby edge. If no edge exists, then fHV = 1.0.
11

#4
Uncracked Concrete
Embedment hef
in (mm)
1-3/4
(44)
2-1/2
(64)
3
(76)
4
(102)
5
(127)
5-3/4
(146)
6
(152)
7
(178)
7-1/4
(184)
8
(203)
9
(229)
10
(254)
11-1/4
(286)
12
(305)
14
(356)
16
(406)
18
(457)
20
(508)
22
(559)
24
(610)
30
(762)
36
(914)
>48
(1219)
Spacing Factor in
Tension
fAN
4-1/2
(114)
n/a
0.59
0.61
0.65
0.69
0.71
0.72
0.76
0.77
0.80
0.83
0.87
0.92
0.94
1.00
6
(152)
n/a
0.57
0.58
0.61
0.64
0.66
0.67
0.69
0.70
0.72
0.75
0.78
0.81
0.83
0.89
0.94
1.00
10
(254)
n/a
0.54
0.55
0.57
0.58
0.60
0.60
0.62
0.62
0.63
0.65
0.67
0.69
0.70
0.73
0.77
0.80
0.83
0.87
0.90
1.00

in Tension
fRN
4-1/2
(114)
0.27
0.32
0.35
0.42
0.49
0.55
0.57
0.67
0.69
0.76
0.86
0.95
1.00
6
(152)
0.20
0.23
0.26
0.30
0.36
0.40
0.42
0.49
0.51
0.56
0.63
0.70
0.78
0.84
0.98
1.00
10
(254)
0.12
0.14
0.15
0.18
0.21
0.23
0.24
0.29
0.30
0.33
0.37
0.41
0.46
0.49
0.57
0.65
0.73
0.82
0.90
0.98
1.00
Spacing Factor in
Shear3
fAV
4-1/2
(114)
n/a
0.54
0.55
0.57
0.58
0.59
0.60
0.61
0.62
0.63
0.65
0.66
0.68
0.70
0.73
0.76
0.79
0.83
0.86
0.89
0.99
1.00
6
(152)
n/a
0.53
0.54
0.55
0.57
0.58
0.58
0.59
0.60
0.61
0.62
0.63
0.65
0.66
0.69
0.71
0.74
0.77
0.80
0.82
0.90
0.98
1.00
10
(254)
n/a
0.52
0.53
0.54
0.55
0.55
0.56
0.57
0.57
0.58
0.59
0.60
0.61
0.61
0.63
0.65
0.67
0.69
0.71
0.73
0.79
0.84
0.96
Toward Edge
To Edge
fRV
fRV
4-1/2
6
10
4-1/2
6
(114) (152) (254) (114) (152)
0.07
0.05
0.03
0.14
0.11
0.12
0.09
0.05
0.24
0.18
0.16
0.12
0.07
0.32
0.24
0.24
0.18
0.11
0.45
0.37
0.34
0.26
0.15
0.51
0.42
0.42
0.31
0.19
0.57
0.46
0.45
0.34
0.20
0.59
0.47
0.56
0.42
0.25
0.67
0.52
0.59
0.45
0.27
0.69
0.53
0.69
0.52
0.31
0.76
0.57
0.82
0.62
0.37
0.86
0.63
0.96
0.72
0.43
0.95
0.70
1.00
0.86
0.52
1.00
0.78
0.95
0.57
0.84
1.00
0.72
0.98
0.88
1.00
1.00
Conc. Thickness
Factor in Shear4
fHV
10
(254)
0.06
0.11
0.14
0.22
0.31
0.34
0.35
0.38
0.38
0.40
0.43
0.46
0.50
0.52
0.58
0.65
0.73
0.82
0.90
0.98
1.00
4-1/2
(114)
n/a
n/a
n/a
n/a
n/a
0.61
0.62
0.67
0.69
0.72
0.76
0.81
0.86
0.88
0.95
1.00
6
(152)
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.62
0.66
0.69
0.73
0.78
0.80
0.87
0.93
0.98
1.00
10
(254)
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.66
0.68
0.73
0.78
0.83
0.87
0.92
0.96
1.00
#5
Uncracked Concrete
1
2
3
4
Embedment hef
in (mm)
1-3/4
(44)
3-1/8
(79)
4
(102)
4-5/8
(117)
5
(127)
6
(152)
7
(178)
7-1/8
(181)
8
(203)
9
(229)
10
(254)
11
(279)
12
(305)
14
(356)
16
(406)
18
(457)
20
(508)
22
(559)
24
(610)
26
(660)
28
(711)
30
(762)
36
(914)
>48
(1219)
Spacing Factor in
Tension
fAN
5-5/8
(143)
n/a
0.59
0.62
0.64
0.65
0.68
0.71
0.71
0.74
0.77
0.80
0.83
0.86
0.91
0.97
1.00

in Tension
fRN
7-1/2 12-1/2 5-5/8

(191) (318) (143)
n/a
n/a
0.25
0.57
0.54
0.32
0.59
0.55
0.36
0.60
0.56
0.39
0.61
0.57
0.41
0.63
0.58
0.47
0.66
0.59
0.53
0.66
0.60
0.54
0.68
0.61
0.61
0.70
0.62
0.68
0.72
0.63
0.76
0.74
0.65
0.83
0.77
0.66
0.91
0.81
0.69
1.00
0.86
0.71
0.90
0.74
0.94
0.77
0.99
0.79
1.00
0.82
0.85
0.87
0.90
0.98
1.00

Conc. Thickness
Factor in Shear4
Toward Edge
To Edge
fHV
fRV
fRV
7-1/2 12-1/2 5-5/8 7-1/2 12-1/2 5-5/8 7-1/2 12-1/2 5-5/8 7-1/2 12-1/2
(191) (318) (143) (191) (318) (143) (191) (318) (143) (191) (318)
n/a
n/a
0.05
0.04
0.02
0.10
0.08
0.05
n/a
n/a
n/a
0.53
0.52
0.12
0.09
0.05
0.24
0.18
0.11
n/a
n/a
n/a
0.54
0.53
0.17
0.13
0.08
0.35
0.26
0.16
n/a
n/a
n/a
0.55
0.54
0.22
0.16
0.10
0.43
0.33
0.20
n/a
n/a
n/a
0.55
0.54
0.24
0.18
0.11
0.45
0.37
0.22
n/a
n/a
n/a
0.56
0.55
0.32
0.24
0.14
0.50
0.41
0.29
n/a
n/a
n/a
0.58
0.55
0.40
0.30
0.18
0.55
0.45
0.34
n/a
n/a
n/a
0.58
0.55
0.41
0.31
0.19
0.56
0.46
0.34
0.61
n/a
n/a
0.59
0.56
0.49
0.37
0.22
0.61
0.49
0.36
0.65
n/a
n/a
0.60
0.57
0.59
0.44
0.26
0.68
0.53
0.38
0.68
0.62
n/a
0.61
0.58
0.69
0.52
0.31
0.76
0.57
0.40
0.72
0.66
n/a
0.62
0.58
0.79
0.60
0.36
0.83
0.62
0.42
0.76
0.69
n/a
0.63
0.59
0.91
0.68
0.41
0.91
0.67
0.45
0.79
0.72
n/a
0.65
0.61
1.00
0.86
0.51
1.00
0.78
0.49
0.85
0.78
0.65
0.67
0.62
1.00
0.63
0.89
0.54
0.91
0.83
0.70
0.69
0.64
0.75
1.00
0.59
0.97
0.88
0.74
0.71
0.65
0.88
0.65
1.00
0.93
0.78
0.74
0.67
1.00
0.72
0.97
0.82
0.76
0.68
0.78
1.00
0.86
0.78
0.70
0.85
0.89
0.80
0.71
0.91
0.92
0.82
0.73
0.98
0.96
0.89
0.77
1.00
1.00
1.00
0.87
Spacing Factor in
Shear3
fAV
7-1/2 12-1/2 5-5/8

(191) (318) (143)
0.19
0.11
n/a
0.23
0.14
0.54
0.27
0.16
0.55
0.29
0.17
0.56
0.30
0.18
0.57
0.34
0.20
0.58
0.39
0.23
0.59
0.40
0.23
0.59
0.45
0.26
0.60
0.50
0.29
0.62
0.56
0.33
0.63
0.61
0.36
0.64
0.67
0.39
0.66
0.78
0.46
0.68
0.89
0.52
0.71
1.00
0.59
0.73
0.65
0.76
0.72
0.79
0.78
0.81
0.85
0.84
0.91
0.86
0.98
0.89
1.00
0.97
1.00

12

#6
Uncracked Concrete
Embedment hef
in (mm)
1-3/4
(44)
3-3/4
(95)
4
(102)
5
(127)
5-1/4
(133)
6
(152)
7
(178)
8
(203)
8-1/2
(216)
9
(229)
10
(254)
10-3/4
(273)
12
(305)
14
(356)
16
(406)
16-3/4
(425)
18
(457)
20
(508)
22
(559)
24
(610)
26
(660)
28
(711)
30
(762)
36
(914)
>48
(1219)
Spacing Factor in
Tension
fAN
6-3/4
(171)
n/a
0.59
0.60
0.62
0.63
0.65
0.67
0.70
0.71
0.72
0.75
0.77
0.80
0.85
0.90
0.91
0.94
0.99
1.00
9
(229)
n/a
0.57
0.57
0.59
0.60
0.61
0.63
0.65
0.66
0.67
0.69
0.70
0.72
0.76
0.80
0.81
0.83
0.87
0.91
0.94
0.98
1.00
15
(381)
n/a
0.54
0.54
0.56
0.56
0.57
0.58
0.59
0.59
0.60
0.61
0.62
0.63
0.66
0.68
0.69
0.70
0.72
0.74
0.77
0.79
0.81
0.83
0.90
1.00

in Tension
fRN
6-3/4
(171)
0.24
0.32
0.33
0.37
0.38
0.41
0.46
0.51
0.54
0.57
0.63
0.68
0.76
0.88
1.00
9
(229)
0.18
0.23
0.24
0.27
0.28
0.30
0.34
0.37
0.39
0.42
0.46
0.50
0.56
0.65
0.74
0.78
0.83
0.93
1.00
15
(381)
0.10
0.14
0.14
0.16
0.16
0.18
0.20
0.22
0.23
0.24
0.27
0.29
0.33
0.38
0.43
0.45
0.49
0.54
0.60
0.65
0.71
0.76
0.81
0.98
1.00
Spacing Factor in
Shear3
fAV
6-3/4
(171)
n/a
0.54
0.54
0.55
0.56
0.56
0.57
0.59
0.59
0.60
0.61
0.61
0.63
0.65
0.67
0.68
0.69
0.71
0.74
0.76
0.78
0.80
0.82
0.88
1.00
9
(229)
n/a
0.53
0.54
0.54
0.55
0.55
0.56
0.57
0.57
0.58
0.59
0.59
0.61
0.62
0.64
0.65
0.66
0.68
0.69
0.71
0.73
0.75
0.76
0.82
0.92
15
(381)
n/a
0.52
0.53
0.53
0.53
0.54
0.54
0.55
0.55
0.56
0.56
0.57
0.58
0.59
0.60
0.61
0.61
0.63
0.64
0.65
0.66
0.68
0.69
0.73
0.80
Toward Edge
To Edge
fRV
fRV
6-3/4
9
15
6-3/4
9
(171) (229) (381) (171) (229)
0.04
0.03
0.02
0.08
0.06
0.12
0.09
0.05
0.24
0.18
0.13
0.10
0.06
0.26
0.19
0.18
0.14
0.08
0.36
0.27
0.20
0.15
0.09
0.39
0.29
0.24
0.18
0.11
0.45
0.36
0.30
0.23
0.14
0.49
0.41
0.37
0.28
0.17
0.53
0.44
0.40
0.30
0.18
0.56
0.45
0.44
0.33
0.20
0.58
0.47
0.51
0.39
0.23
0.63
0.50
0.57
0.43
0.26
0.68
0.53
0.67
0.51
0.30
0.76
0.57
0.85
0.64
0.38
0.88
0.65
1.00
0.78
0.47
1.00
0.74
0.83
0.50
0.78
0.93
0.56
0.83
1.00
0.65
0.93
0.75
1.00
0.86
0.97
1.00
Conc. Thickness
Factor in Shear4
fHV
15
(381)
0.03
0.11
0.12
0.16
0.18
0.21
0.27
0.33
0.34
0.35
0.37
0.38
0.40
0.44
0.48
0.49
0.52
0.56
0.60
0.65
0.71
0.76
0.81
0.98
1.00
6-3/4
(171)
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.60
0.62
0.65
0.68
0.72
0.77
0.83
0.85
0.88
0.92
0.97
1.00
9
(229)
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.62
0.65
0.70
0.75
0.77
0.80
0.84
0.88
0.92
0.96
0.99
1.00
15
(381)
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.65
0.67
0.71
0.74
0.78
0.81
0.84
0.87
0.95
1.00
#7
Uncracked Concrete
1
2
3
4
Embedment hef
in (mm)
1-3/4
(44)
4-3/8
(111)
5
(127)
5-1/2
(140)
6
(152)
7
(178)
8
(203)
9
(229)
9-7/8
(251)
10
(254)
11
(279)
12
(305)
12-1/2
(318)
14
(356)
16
(406)
18
(457)
(495)
19-1/2
20
(508)
22
(559)
24
(610)
26
(660)
28
(711)
30
(762)
36
(914)
>48
(1219)

Conc. Thickness
Factor in Shear4
Toward Edge
To Edge
fHV
fRV
fRV
7-7/8 10-1/2 17-1/2 7-7/8 10-1/2 17-1/2 7-7/8 10-1/2 17-1/2 7-7/8 10-1/2 17-1/2 7-7/8 10-1/2 17-1/2 7-7/8 10-1/2 17-1/2
(200) (267) (445) (200) (267) (445) (200) (267) (445) (200) (267) (445) (200) (267) (445) (200) (267) (445)
n/a
n/a
n/a
0.23
0.17
0.10
n/a
n/a
n/a
0.03
0.02
0.01
0.06
0.04
0.02
n/a
n/a
n/a
0.59
0.57
0.54
0.32
0.23
0.14
0.54
0.53
0.52
0.11
0.08
0.05
0.22
0.16
0.10
n/a
n/a
n/a
0.61
0.58
0.55
0.34
0.25
0.15
0.54
0.54
0.53
0.13
0.10
0.06
0.27
0.20
0.12
n/a
n/a
n/a
0.62
0.59
0.55
0.36
0.26
0.15
0.55
0.54
0.53
0.15
0.12
0.07
0.31
0.23
0.14
n/a
n/a
n/a
0.63
0.60
0.56
0.37
0.28
0.16
0.55
0.54
0.53
0.18
0.13
0.08
0.35
0.26
0.16
n/a
n/a
n/a
0.65
0.61
0.57
0.41
0.30
0.18
0.56
0.55
0.54
0.22
0.17
0.10
0.44
0.33
0.20
n/a
n/a
n/a
0.67
0.63
0.58
0.45
0.33
0.19
0.57
0.56
0.54
0.27
0.20
0.12
0.48
0.40
0.24
n/a
n/a
n/a
0.69
0.64
0.59
0.49
0.36
0.21
0.58
0.56
0.55
0.32
0.24
0.14
0.52
0.43
0.29
n/a
n/a
n/a
0.71
0.66
0.59
0.53
0.39
0.23
0.59
0.57
0.55
0.37
0.28
0.17
0.56
0.45
0.33
0.59
n/a
n/a
0.71
0.66
0.60
0.54
0.40
0.23
0.59
0.57
0.55
0.38
0.28
0.17
0.56
0.45
0.34
0.59
n/a
n/a
0.73
0.67
0.60
0.59
0.44
0.26
0.60
0.58
0.56
0.44
0.33
0.20
0.60
0.48
0.36
0.62
n/a
n/a
0.75
0.69
0.61
0.65
0.48
0.28
0.60
0.59
0.56
0.50
0.37
0.22
0.65
0.51
0.37
0.65
n/a
n/a
0.76
0.70
0.62
0.67
0.50
0.29
0.61
0.59
0.56
0.53
0.40
0.24
0.67
0.53
0.38
0.66
0.60
n/a
0.80
0.72
0.63
0.75
0.55
0.33
0.62
0.60
0.57
0.62
0.47
0.28
0.75
0.57
0.40
0.70
0.63
n/a
0.84
0.75
0.65
0.86
0.63
0.37
0.64
0.61
0.58
0.76
0.57
0.34
0.86
0.63
0.43
0.75
0.68
n/a
0.88
0.79
0.67
0.97
0.71
0.42
0.66
0.63
0.59
0.91
0.68
0.41
0.97
0.71
0.47
0.79
0.72
n/a
0.91
0.81
0.69
1.00
0.77
0.45
0.67
0.64
0.60
1.00
0.77
0.46
1.00
0.77
0.49
0.82
0.75
0.63
0.92
0.82
0.69
0.79
0.46
0.67
0.64
0.60
0.80
0.48
0.79
0.50
0.83
0.76
0.64
0.97
0.85
0.71
0.87
0.51
0.69
0.66
0.61
0.92
0.55
0.87
0.53
0.88
0.79
0.67
1.00
0.88
0.73
0.95
0.56
0.71
0.67
0.62
1.00
0.63
0.95
0.57
0.91
0.83
0.70
0.91
0.75
1.00
0.60
0.73
0.69
0.63
0.71
1.00
0.61
0.95
0.86
0.73
0.94
0.77
0.65
0.74
0.70
0.64
0.80
0.65
0.99
0.90
0.76
0.98
0.79
0.70
0.76
0.72
0.65
0.88
0.70
1.00
0.93
0.78
1.00
0.84
0.84
0.81
0.76
0.68
1.00
0.84
1.00
0.86
0.96
1.00
0.92
0.84
0.75
1.00
0.99
Spacing Factor in
Tension
fAN

in Tension
fRN
Spacing Factor in
Shear3
fAV

13

#8
Uncracked Concrete
Embedment hef
in (mm)
1-3/4
(44)
5
(127)
6
(152)
6-1/4
(159)
7
(178)
8
(203)
9
(229)
10
(254)
11
(279)
11-1/4
(286)
12
(305)
13
(330)
14
(356)
14-1/4
(362)
16
(406)
18
(457)
(508)
20
22
(559)
22-1/4
(565)
24
(610)
26
(660)
28
(711)
30
(762)
36
(914)
>48
(1219)
Spacing Factor in
Tension
fAN
9
(229)
n/a
0.59
0.61
0.62
0.63
0.65
0.67
0.69
0.70
0.71
0.72
0.74
0.76
0.76
0.80
0.83
0.87
0.91
0.91
0.94
0.98
1.00
12
(305)
n/a
0.57
0.58
0.59
0.60
0.61
0.63
0.64
0.65
0.66
0.67
0.68
0.69
0.70
0.72
0.75
0.78
0.81
0.81
0.83
0.86
0.89
0.92
1.00
20
(508)
n/a
0.54
0.55
0.55
0.56
0.57
0.58
0.58
0.59
0.59
0.60
0.61
0.62
0.62
0.63
0.65
0.67
0.68
0.69
0.70
0.72
0.73
0.75
0.80
0.90

in Tension
fRN
9
(229)
0.23
0.32
0.35
0.35
0.38
0.41
0.45
0.48
0.52
0.53
0.57
0.61
0.66
0.67
0.75
0.85
0.94
1.00
12
(305)
0.17
0.23
0.25
0.26
0.28
0.30
0.33
0.35
0.38
0.39
0.42
0.45
0.49
0.49
0.55
0.62
0.69
0.76
0.77
0.83
0.90
0.97
1.00
20
(508)
0.10
0.14
0.15
0.15
0.16
0.18
0.19
0.21
0.22
0.23
0.24
0.26
0.28
0.29
0.33
0.37
0.41
0.45
0.45
0.49
0.53
0.57
0.61
0.73
0.98
Spacing Factor in
Shear3
fAV
9
(229)
n/a
0.54
0.55
0.55
0.55
0.56
0.57
0.58
0.58
0.59
0.59
0.60
0.61
0.61
0.62
0.64
0.65
0.67
0.67
0.68
0.70
0.71
0.73
0.77
0.86
12
(305)
n/a
0.53
0.54
0.54
0.54
0.55
0.55
0.56
0.57
0.57
0.57
0.58
0.58
0.59
0.60
0.61
0.62
0.63
0.63
0.64
0.66
0.67
0.68
0.72
0.79
20
(508)
n/a
0.52
0.53
0.53
0.53
0.53
0.54
0.54
0.55
0.55
0.55
0.56
0.56
0.56
0.57
0.58
0.59
0.59
0.60
0.60
0.61
0.62
0.63
0.65
0.71
Toward Edge
To Edge
fRV
fRV
9
12
20
9
12
(229) (305) (508) (229) (305)
0.02
0.02
0.01
0.05
0.03
0.11
0.08
0.05
0.22
0.15
0.14
0.10
0.06
0.29
0.20
0.15
0.11
0.06
0.30
0.21
0.18
0.13
0.08
0.36
0.25
0.22
0.15
0.09
0.44
0.31
0.26
0.18
0.11
0.48
0.37
0.31
0.22
0.13
0.51
0.42
0.35
0.25
0.15
0.55
0.44
0.37
0.26
0.16
0.55
0.45
0.40
0.28
0.17
0.58
0.47
0.46
0.32
0.19
0.62
0.49
0.51
0.36
0.22
0.66
0.52
0.52
0.37
0.22
0.67
0.52
0.62
0.44
0.26
0.75
0.57
0.74
0.52
0.31
0.85
0.62
0.87
0.61
0.37
0.94
0.69
1.00
0.71
0.42
1.00
0.76
0.72
0.43
0.77
0.81
0.48
0.83
0.91
0.54
0.90
1.00
0.61
0.97
0.68
1.00
0.89
1.00
Conc. Thickness
Factor in Shear4
fHV
20
(508)
0.02
0.09
0.12
0.13
0.15
0.19
0.22
0.26
0.30
0.31
0.34
0.36
0.38
0.38
0.40
0.43
0.46
0.49
0.49
0.52
0.55
0.58
0.61
0.73
0.98
9
(229)
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.58
0.60
0.63
0.65
0.66
0.70
0.74
0.78
0.82
0.82
0.85
0.89
0.92
0.95
1.00
12
(305)
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.59
0.62
0.66
0.69
0.73
0.73
0.76
0.79
0.82
0.85
0.93
1.00
20
(508)
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.62
0.64
0.67
0.69
0.72
0.78
0.91

Conc. Thickness
Factor in Shear4
Toward Edge
To Edge
fHV
fRV
fRV
Embedment hef
10-1/8 13-1/2 22-1/2 10-1/8 13-1/2 22-1/2 10-1/8 13-1/2 22-1/2 10-1/8 13-1/2 22-1/2 10-1/8 13-1/2 22-1/2 10-1/8 13-1/2 22-1/2
(257) (343) (572) (257) (343) (572) (257) (343) (572) (257) (343) (572) (257) (343) (572) (257) (343) (572)
in (mm)
1-3/4
(44)
n/a
n/a
n/a
0.22
0.16
0.10
n/a
n/a
n/a
0.02
0.01
0.01
0.04
0.03
0.02
n/a
n/a
n/a
5-5/8
(143)
0.59
0.57
0.54
0.32
0.23
0.14
0.54
0.53
0.52
0.11
0.07
0.04
0.22
0.14
0.09
n/a
n/a
n/a
6
(152)
0.60
0.57
0.54
0.33
0.24
0.14
0.54
0.53
0.52
0.12
0.08
0.05
0.24
0.16
0.10
n/a
n/a
n/a
7
(178)
0.62
0.59
0.55
0.36
0.26
0.15
0.55
0.54
0.53
0.15
0.10
0.06
0.30
0.20
0.12
n/a
n/a
n/a
7-1/4
(184)
0.62
0.59
0.55
0.36
0.27
0.16
0.55
0.54
0.53
0.16
0.11
0.06
0.32
0.21
0.13
n/a
n/a
n/a
8
(203)
0.63
0.60
0.56
0.38
0.28
0.17
0.55
0.54
0.53
0.18
0.12
0.07
0.37
0.24
0.15
n/a
n/a
n/a
9
(229)
0.65
0.61
0.57
0.41
0.30
0.18
0.56
0.55
0.53
0.22
0.15
0.09
0.44
0.29
0.18
n/a
n/a
n/a
10
(254)
0.66
0.62
0.57
0.45
0.33
0.19
0.57
0.55
0.54
0.26
0.17
0.10
0.48
0.34
0.21
n/a
n/a
n/a
11
(279)
0.68
0.64
0.58
0.48
0.35
0.20
0.57
0.56
0.54
0.30
0.20
0.12
0.51
0.39
0.24
n/a
n/a
n/a
12
(305)
0.70
0.65
0.59
0.51
0.37
0.22
0.58
0.56
0.54
0.34
0.22
0.13
0.54
0.44
0.27
n/a
n/a
n/a
12-7/8
(327)
0.71
0.66
0.60
0.54
0.40
0.23
0.59
0.57
0.55
0.38
0.25
0.15
0.56
0.46
0.30
0.59
n/a
n/a
13
(330)
0.71
0.66
0.60
0.55
0.40
0.24
0.59
0.57
0.55
0.38
0.25
0.15
0.57
0.46
0.30
0.59
n/a
n/a
14
(356)
0.73
0.67
0.60
0.59
0.43
0.25
0.59
0.57
0.55
0.43
0.28
0.17
0.60
0.48
0.34
0.61
n/a
n/a
16
(406)
0.76
0.70
0.62
0.67
0.50
0.29
0.61
0.58
0.56
0.52
0.35
0.21
0.67
0.53
0.38
0.66
n/a
n/a
16-1/4
(413)
0.77
0.70
0.62
0.69
0.50
0.29
0.61
0.58
0.56
0.53
0.35
0.21
0.69
0.53
0.38
0.66
0.58
n/a
18
(457)
0.80
0.72
0.63
0.76
0.56
0.33
0.62
0.59
0.57
0.62
0.41
0.25
0.76
0.57
0.40
0.70
0.61
n/a
(508)
0.83
0.75
0.65
0.84
0.62
0.36
0.63
0.60
0.57
0.73
0.48
0.29
0.84
0.62
0.43
0.73
0.64
n/a
20
22
(559)
0.86
0.77
0.66
0.93
0.68
0.40
0.65
0.61
0.58
0.84
0.56
0.34
0.93
0.68
0.45
0.77
0.67
n/a
24
(610)
0.90
0.80
0.68
1.00
0.74
0.43
0.66
0.62
0.59
0.96
0.64
0.38
1.00
0.74
0.48
0.80
0.70
n/a
25-1/4
(641)
0.92
0.81
0.69
0.78
0.46
0.67
0.63
0.59
1.00
0.69
0.41
0.78
0.49
0.83
0.72
0.61
26
(660)
0.93
0.82
0.69
0.80
0.47
0.68
0.63
0.60
0.72
0.43
0.80
0.50
0.84
0.73
0.62
28
(711)
0.96
0.85
0.71
0.87
0.51
0.69
0.64
0.60
0.80
0.48
0.87
0.53
0.87
0.76
0.64
30
(762)
0.99
0.87
0.72
0.93
0.54
0.70
0.65
0.61
0.89
0.53
0.93
0.56
0.90
0.79
0.66
36
(914)
1.00
0.94
0.77
1.00
0.65
0.74
0.68
0.63
1.00
0.70
1.00
0.65
0.99
0.86
0.73
>48
(1219)
1.00
0.86
0.87
0.82
0.75
0.68
1.00
0.87
1.00
0.99
0.84
#9
Uncracked Concrete
1
2
3
4
Spacing Factor in
Tension
fAN

in Tension
fRN
Spacing Factor in
Shear3
fAV

14

#10
Uncracked Concrete
1
2
3
4
Spacing Factor in
Tension
fAN
Embedment hef
11-1/4 15
(286) (381)
in (mm)
1-3/4
(44)
n/a
n/a
6-1/4
(159)
0.59
0.57
7
(178)
0.60
0.58
8
(203)
0.62
0.59
9
(229)
0.63
0.60
10
(254)
0.65
0.61
11
(279)
0.66
0.62
12
(305)
0.68
0.63
13
(330)
0.69
0.64
14
(356)
0.71
0.66
14-1/4
(362)
0.71
0.66
15
(381)
0.72
0.67
16
(406)
0.74
0.68
17
(432)
0.75
0.69
18
(457)
0.77
0.70
20
(508)
0.80
0.72
22
(559)
0.83
0.74
24
(610)
0.86
0.77
26
(660)
0.89
0.79
28
(711)
0.91
0.81
30
(762)
0.94
0.83
36
(914)
1.00
0.90
>48
(1219)
1.00

in Tension
fRN
25 11-1/4 15
(635) (286) (381)
n/a
0.22
0.16
0.54
0.32
0.23
0.55
0.34
0.25
0.55
0.36
0.27
0.56
0.39
0.28
0.57
0.41
0.30
0.57
0.44
0.32
0.58
0.47
0.34
0.59
0.50
0.37
0.59
0.53
0.39
0.60
0.54
0.40
0.60
0.57
0.42
0.61
0.61
0.45
0.61
0.64
0.47
0.62
0.68
0.50
0.63
0.76
0.56
0.65
0.83
0.61
0.66
0.91
0.67
0.67
0.99
0.72
0.69
1.00
0.78
0.70
0.83
0.74
1.00
0.82
Toward Edge
To Edge
fRV
fRV
25 11-1/4 15
25 11-1/4 15
(635) (286) (381) (635) (286) (381)
n/a
0.02
0.01
0.01
0.03
0.02
0.52
0.11
0.07
0.04
0.22
0.14
0.52
0.13
0.08
0.05
0.26
0.17
0.53
0.16
0.10
0.06
0.31
0.20
0.53
0.19
0.12
0.07
0.38
0.24
0.53
0.22
0.14
0.08
0.44
0.29
0.53
0.25
0.16
0.10
0.47
0.33
0.54
0.29
0.19
0.11
0.50
0.38
0.54
0.33
0.21
0.12
0.53
0.42
0.54
0.36
0.24
0.14
0.55
0.45
0.55
0.37
0.24
0.14
0.56
0.46
0.55
0.40
0.26
0.15
0.58
0.47
0.55
0.45
0.29
0.17
0.61
0.49
0.55
0.49
0.32
0.18
0.64
0.51
0.56
0.53
0.35
0.20
0.68
0.53
0.56
0.62
0.40
0.24
0.76
0.57
0.57
0.72
0.47
0.27
0.83
0.62
0.58
0.82
0.53
0.31
0.91
0.67
0.58
0.92
0.60
0.35
0.99
0.72
0.59
1.00
0.67
0.39
1.00
0.78
0.60
0.74
0.43
0.83
0.61
0.98
0.57
1.00
0.65
1.00
0.87
Spacing Factor in
Shear3
fAV
25 11-1/4 15
(635) (286) (381)
0.09
n/a
n/a
0.14
0.54
0.53
0.14
0.54
0.53
0.16
0.55
0.54
0.17
0.55
0.54
0.18
0.56
0.55
0.19
0.57
0.55
0.20
0.57
0.55
0.21
0.58
0.56
0.23
0.59
0.56
0.23
0.59
0.56
0.24
0.59
0.57
0.26
0.60
0.57
0.28
0.60
0.58
0.29
0.61
0.58
0.33
0.62
0.59
0.36
0.63
0.60
0.39
0.65
0.61
0.42
0.66
0.62
0.46
0.67
0.63
0.49
0.68
0.64
0.59
0.72
0.66
0.78
0.79
0.72
Conc. Thickness
Factor in Shear4
fHV
25 11-1/4 15
(635) (286) (381)
0.01
n/a
n/a
0.08
n/a
n/a
0.10
n/a
n/a
0.12
n/a
n/a
0.14
n/a
n/a
0.17
n/a
n/a
0.19
n/a
n/a
0.22
n/a
n/a
0.25
n/a
n/a
0.28
n/a
n/a
0.28
0.59
n/a
0.31
0.60
n/a
0.34
0.62
n/a
0.37
0.64
n/a
0.38
0.66
0.57
0.40
0.70
0.60
0.42
0.73
0.63
0.45
0.76
0.66
0.47
0.79
0.69
0.49
0.82
0.71
0.52
0.85
0.74
0.59
0.94
0.81
0.78
1.00
0.94
25
(635)
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.60
0.62
0.68
0.78

15

Table 11 H
ilti HIT-HY 100 Adhesive Factored Resistance with Concrete / Bond Failure for Canadian Rebar in
Uncracked Concrete 1,2,3,4,5,6,7,8
Nominal
Rebar Size
10 M
15 M
20 M
25 M
30 M
Shear Vr
Tension Nr
Effective
Embedment
Depth
mm
fc =
20 MPa
(kN)
fc =
25 MPa
(kN)
fc =
30 MPa
(kN)
fc =
35 MPa
(kN)
fc =
40 MPa
(kN)
fc =
20 MPa
(kN)
fc =
25 MPa
(kN)
fc =
30 MPa
(kN)
fc =
35 MPa
(kN)
fc =
40 MPa
(kN)
115
180
226
145
250
320
200
355
390
230
405
504
260
455
598
22.3
34.9
43.8
39.8
68.6
87.8
66.9
118.7
130.4
99.4
175.1
217.9
112.8
197.5
259.5
22.3
34.9
43.8
39.8
68.6
87.8
66.9
118.7
130.4
99.4
175.1
217.9
112.8
197.5
259.5
22.3
34.9
43.8
39.8
68.6
87.8
66.9
118.7
130.4
99.4
175.1
217.9
112.8
197.5
259.5
23.6
37.0
46.4
42.2
72.7
93.1
70.9
125.9
138.3
105.4
185.6
230.9
119.6
209.3
275.1
23.6
37.0
46.4
42.2
72.7
93.1
70.9
125.9
138.3
105.4
185.6
230.9
119.6
209.3
275.1
48.0
75.1
94.4
85.7
147.8
189.2
144.1
255.8
281.0
214.1
377.1
469.2
262.5
502.6
660.6
48.0
75.1
94.4
85.7
147.8
189.2
144.1
255.8
281.0
214.1
377.1
469.2
287.2
502.6
660.6
48.0
75.1
94.4
85.7
147.8
189.2
144.1
255.8
281.0
214.1
377.1
469.2
287.2
502.6
660.6
50.9
79.7
100.0
90.9
156.6
200.5
152.7
271.1
297.8
227.0
399.7
497.4
304.4
532.8
700.2
50.9
79.7
100.0
90.9
156.6
200.5
152.7
271.1
297.8
227.0
399.7
497.4
304.4
532.8
700.2
1
2
3
4

Apply spacing, edge distance, and concrete thickness factors in tables 13 - 17 as necessary. Compare to the steel values in table 12.
5 Data is for temperature range A: Max. short term temperature = 104 F (40 C), max. long term temperature = 75 F (24 C).
periods of time.
6 Tabular values are for dry and water-saturated concrete conditions.
7 Tabular values are for short term loads only. For sustained loads including overhead use, see Section 2.4.5.
8 Tabular values are for normal weight concrete only. For lightweight concrete multiply design strength (factored resistance) by a as follows:
Table 12 Steel

Factored Resistance (CSA A23.3 Annex D Based Design) for Canadian Rebar 3
Nominal
Rebar Size
10 M
15 M
20 M
25 M
30 M
CSA-G30.18 Grade 400 4

Tensile1
Nsr
Shear2
Vsr
32.1
64.6
96.1
160.7
226.1
17.9
35.9
53.6
89.2
125.7
1 Tensile = Ase s fut R as noted in CSA A23.3 Annex D

2 Shear = Ase s 0.60 fut R as noted in CSA A23.3 Annex D
3 See Section 2.4.4 to convert factored resistance value to ASD value.
4 CSA-G30.18 Grade 400 rebar are considered brittle steel elements.
16

Table 13 Load Adjustment Factors for 10 M Canadian Rebar in Uncracked Concrete 1,2
10 M
Uncracked
Concrete
Embedment hef
mm
45
50
75
100
125
150
175
200
225
250
275
300
325
350
375
400
450
500
550
600
700
800
1000
>1200
Spacing Factor in
Tension
fAN

in Tension
fRN
Spacing Factor in
Shear3
fAV
Toward Edge
To Edge
fRV
fRV
Conc. Thickness
Factor in Shear4
fHV
115
180
226
115
180
226
115
180
226
115
180
226
115
180
226
115
180
226
n/a
0.57
0.61
0.64
0.68
0.72
0.75
0.79
0.83
0.86
0.90
0.93
0.97
1.00
n/a
0.55
0.57
0.59
0.62
0.64
0.66
0.69
0.71
0.73
0.75
0.78
0.80
0.82
0.85
0.87
0.92
0.96
1.00
n/a
0.54
0.56
0.57
0.59
0.61
0.63
0.65
0.67
0.68
0.70
0.72
0.74
0.76
0.78
0.79
0.83
0.87
0.91
0.94
1.00
0.25
0.27
0.33
0.39
0.47
0.56
0.66
0.75
0.85
0.94
1.00
0.16
0.17
0.20
0.24
0.29
0.35
0.41
0.47
0.52
0.58
0.64
0.70
0.76
0.82
0.87
0.93
1.00
0.12
0.13
0.16
0.19
0.23
0.28
0.32
0.37
0.41
0.46
0.51
0.55
0.60
0.64
0.69
0.74
0.83
0.92
1.00
n/a
0.53
0.55
0.57
0.59
0.60
0.62
0.64
0.66
0.67
0.69
0.71
0.73
0.74
0.76
0.78
0.81
0.85
0.88
0.92
0.99
1.00
n/a
0.53
0.54
0.55
0.56
0.58
0.59
0.60
0.62
0.63
0.64
0.66
0.67
0.68
0.69
0.71
0.73
0.76
0.78
0.81
0.86
0.91
1.00
n/a
0.52
0.53
0.54
0.56
0.57
0.58
0.59
0.60
0.61
0.62
0.63
0.64
0.66
0.67
0.68
0.70
0.72
0.74
0.77
0.81
0.86
0.94
1.00
0.08
0.10
0.18
0.27
0.38
0.50
0.63
0.76
0.91
1.00
0.05
0.06
0.11
0.17
0.24
0.32
0.40
0.49
0.58
0.68
0.79
0.90
1.00
0.04
0.05
0.09
0.14
0.19
0.25
0.32
0.39
0.46
0.54
0.63
0.71
0.81
0.90
1.00
0.16
0.19
0.35
0.45
0.51
0.58
0.66
0.75
0.85
0.94
1.00
0.10
0.12
0.22
0.35
0.39
0.42
0.46
0.51
0.55
0.59
0.64
0.70
0.76
0.82
0.87
0.93
1.00
0.08
0.10
0.18
0.28
0.35
0.37
0.40
0.43
0.47
0.50
0.53
0.57
0.60
0.64
0.69
0.74
0.83
0.92
1.00
n/a
n/a
n/a
n/a
n/a
0.65
0.70
0.75
0.79
0.83
0.88
0.91
0.95
0.99
1.00
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.68
0.72
0.75
0.79
0.82
0.85
0.88
0.91
0.96
1.00
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.70
0.73
0.76
0.79
0.82
0.84
0.89
0.94
0.99
1.00
15 M
Uncracked
Concrete
Embedment hef
mm
45
75
100
125
150
175
200
225
250
275
300
325
350
375
400
450
500
550
600
650
700
800
1000
>1200
1
2
3
4
Spacing Factor in
Tension
fAN

in Tension
fRN
Spacing Factor in
Shear3
fAV
Toward Edge
To Edge
fRV
fRV
Conc. Thickness
Factor in Shear4
fHV
145
250
320
145
250
320
145
250
320
145
250
320
145
250
320
145
250
320
n/a
0.59
0.61
0.64
0.67
0.70
0.73
0.76
0.79
0.82
0.84
0.87
0.90
0.93
0.96
1.00
n/a
0.55
0.57
0.58
0.60
0.62
0.63
0.65
0.67
0.68
0.70
0.72
0.73
0.75
0.77
0.80
0.83
0.87
0.90
0.93
0.97
1.00
n/a
0.54
0.55
0.57
0.58
0.59
0.60
0.62
0.63
0.64
0.66
0.67
0.68
0.70
0.71
0.73
0.76
0.79
0.81
0.84
0.86
0.92
1.00
0.25
0.30
0.35
0.40
0.45
0.51
0.58
0.66
0.73
0.80
0.88
0.95
1.00
0.14
0.17
0.20
0.23
0.26
0.29
0.33
0.37
0.41
0.45
0.50
0.54
0.58
0.62
0.66
0.74
0.83
0.91
0.99
1.00
0.11
0.13
0.15
0.18
0.20
0.22
0.26
0.29
0.32
0.35
0.38
0.42
0.45
0.48
0.51
0.58
0.64
0.70
0.77
0.83
0.90
1.00
n/a
0.54
0.55
0.57
0.58
0.59
0.61
0.62
0.63
0.65
0.66
0.67
0.69
0.70
0.71
0.74
0.77
0.79
0.82
0.85
0.87
0.93
1.00
n/a
0.53
0.54
0.55
0.56
0.56
0.57
0.58
0.59
0.60
0.61
0.62
0.63
0.64
0.65
0.67
0.68
0.70
0.72
0.74
0.76
0.80
0.87
0.94
n/a
0.52
0.53
0.54
0.55
0.55
0.56
0.57
0.58
0.59
0.59
0.60
0.61
0.62
0.63
0.64
0.66
0.67
0.69
0.70
0.72
0.75
0.81
0.88
0.05
0.12
0.18
0.25
0.33
0.42
0.51
0.61
0.71
0.82
0.94
1.00
0.03
0.07
0.10
0.15
0.19
0.24
0.30
0.35
0.41
0.48
0.54
0.61
0.68
0.76
0.84
1.00
0.02
0.05
0.08
0.11
0.15
0.19
0.23
0.28
0.32
0.37
0.42
0.48
0.53
0.59
0.65
0.78
0.91
1.00
0.11
0.23
0.36
0.44
0.49
0.54
0.60
0.66
0.73
0.80
0.88
0.95
1.00
0.06
0.14
0.21
0.29
0.36
0.38
0.41
0.44
0.46
0.49
0.52
0.56
0.59
0.62
0.66
0.74
0.83
0.91
0.99
1.00
0.05
0.11
0.16
0.23
0.30
0.34
0.36
0.38
0.40
0.42
0.44
0.47
0.49
0.51
0.54
0.58
0.64
0.70
0.77
0.83
0.90
1.00
n/a
n/a
n/a
n/a
n/a
0.61
0.65
0.69
0.73
0.76
0.80
0.83
0.86
0.89
0.92
0.98
1.00
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.67
0.69
0.72
0.74
0.77
0.82
0.86
0.90
0.94
0.98
1.00
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.66
0.69
0.71
0.75
0.79
0.83
0.87
0.90
0.94
1.00

17

20 M
Uncracked
Concrete
Embedment hef
mm
45
100
125
150
175
200
225
250
275
300
325
350
375
400
450
500
550
600
650
700
800
1000
1200
>1500
Spacing Factor in
Tension
fAN

in Tension
fRN
Spacing Factor in
Shear3
fAV
Toward Edge
To Edge
fRV
fRV
Conc. Thickness
Factor in Shear4
fHV
200
355
390
200
355
390
200
355
390
200
355
390
200
355
390
200
355
390
n/a
0.58
0.60
0.63
0.65
0.67
0.69
0.71
0.73
0.75
0.77
0.79
0.81
0.83
0.88
0.92
0.96
1.00
n/a
0.55
0.56
0.57
0.58
0.59
0.61
0.62
0.63
0.64
0.65
0.66
0.68
0.69
0.71
0.73
0.76
0.78
0.81
0.83
0.88
0.97
1.00
n/a
0.54
0.55
0.56
0.57
0.59
0.60
0.61
0.62
0.63
0.64
0.65
0.66
0.67
0.69
0.71
0.74
0.76
0.78
0.80
0.84
0.93
1.00
0.21
0.28
0.32
0.36
0.39
0.44
0.49
0.54
0.59
0.65
0.70
0.75
0.81
0.86
0.97
1.00
0.11
0.15
0.17
0.19
0.21
0.24
0.26
0.29
0.32
0.35
0.38
0.41
0.44
0.47
0.53
0.59
0.65
0.70
0.76
0.82
0.94
1.00
0.10
0.14
0.16
0.18
0.19
0.22
0.24
0.27
0.29
0.32
0.35
0.37
0.40
0.43
0.48
0.53
0.59
0.64
0.69
0.74
0.85
1.00
n/a
0.54
0.55
0.56
0.57
0.58
0.59
0.60
0.61
0.62
0.63
0.64
0.65
0.66
0.68
0.70
0.72
0.74
0.76
0.78
0.81
0.89
0.97
1.00
n/a
0.53
0.53
0.54
0.55
0.55
0.56
0.57
0.57
0.58
0.59
0.59
0.60
0.61
0.62
0.63
0.65
0.66
0.67
0.69
0.71
0.77
0.82
0.90
n/a
0.53
0.53
0.54
0.54
0.55
0.56
0.56
0.57
0.58
0.58
0.59
0.59
0.60
0.61
0.63
0.64
0.65
0.66
0.68
0.70
0.75
0.80
0.88
0.03
0.11
0.16
0.21
0.27
0.32
0.39
0.45
0.52
0.60
0.67
0.75
0.83
0.92
1.00
0.02
0.06
0.09
0.12
0.15
0.18
0.22
0.26
0.29
0.34
0.38
0.42
0.47
0.52
0.62
0.72
0.83
0.95
1.00
0.02
0.06
0.08
0.11
0.14
0.17
0.20
0.23
0.27
0.31
0.34
0.38
0.43
0.47
0.56
0.66
0.76
0.86
0.97
1.00
0.07
0.23
0.32
0.41
0.45
0.49
0.52
0.56
0.60
0.65
0.70
0.75
0.81
0.86
0.97
1.00
0.04
0.13
0.18
0.24
0.30
0.35
0.37
0.39
0.41
0.42
0.44
0.46
0.49
0.51
0.55
0.59
0.65
0.70
0.76
0.82
0.94
1.00
0.04
0.12
0.16
0.22
0.27
0.33
0.35
0.37
0.38
0.40
0.42
0.44
0.46
0.47
0.51
0.55
0.59
0.64
0.69
0.74
0.85
1.00
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.66
0.69
0.71
0.74
0.77
0.79
0.84
0.89
0.93
0.97
1.00
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.69
0.73
0.77
0.80
0.84
0.87
0.93
1.00
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.67
0.71
0.74
0.78
0.81
0.84
0.90
1.00
25 M
Uncracked
Concrete
Embedment hef
mm
45
125
150
175
200
225
250
275
300
325
350
375
400
450
500
550
600
650
700
750
800
1000
1200
>1500
1
2
3
4
Spacing Factor in
Tension
fAN

in Tension
fRN
Spacing Factor in
Shear3
fAV
Toward Edge
To Edge
fRV
fRV
Conc. Thickness
Factor in Shear4
fHV
230
405
504
230
405
504
230
405
504
230
405
504
230
405
504
230
405
504
n/a
0.59
0.61
0.63
0.64
0.66
0.68
0.70
0.72
0.74
0.75
0.77
0.79
0.83
0.86
0.90
0.93
0.97
1.00
n/a
0.55
0.56
0.57
0.58
0.59
0.60
0.61
0.62
0.63
0.64
0.65
0.66
0.69
0.71
0.73
0.75
0.77
0.79
0.81
0.83
0.91
0.99
1.00
n/a
0.54
0.55
0.56
0.57
0.57
0.58
0.59
0.60
0.61
0.62
0.62
0.63
0.65
0.67
0.68
0.70
0.71
0.73
0.75
0.76
0.83
0.90
1.00
0.22
0.31
0.35
0.38
0.41
0.45
0.48
0.52
0.57
0.61
0.66
0.71
0.76
0.85
0.94
1.00
0.12
0.17
0.19
0.21
0.22
0.24
0.26
0.28
0.31
0.34
0.36
0.39
0.41
0.46
0.52
0.57
0.62
0.67
0.72
0.77
0.83
1.00
0.10
0.14
0.15
0.16
0.18
0.19
0.21
0.23
0.25
0.27
0.29
0.31
0.33
0.37
0.41
0.45
0.49
0.53
0.58
0.62
0.66
0.82
0.99
1.00
n/a
0.54
0.55
0.55
0.56
0.57
0.58
0.58
0.59
0.60
0.61
0.61
0.62
0.64
0.65
0.67
0.68
0.70
0.71
0.73
0.74
0.80
0.86
0.95
n/a
0.53
0.53
0.54
0.54
0.55
0.55
0.56
0.56
0.57
0.57
0.58
0.58
0.59
0.60
0.61
0.62
0.63
0.64
0.66
0.67
0.71
0.75
0.81
n/a
0.52
0.53
0.53
0.54
0.54
0.54
0.55
0.55
0.56
0.56
0.57
0.57
0.58
0.59
0.60
0.61
0.62
0.63
0.63
0.64
0.68
0.71
0.77
0.02
0.11
0.14
0.18
0.22
0.26
0.30
0.35
0.40
0.45
0.50
0.56
0.62
0.74
0.86
0.99
1.00
0.01
0.06
0.08
0.10
0.12
0.15
0.17
0.20
0.23
0.26
0.29
0.32
0.35
0.42
0.49
0.56
0.64
0.73
0.81
0.90
0.99
1.00
0.01
0.05
0.06
0.08
0.10
0.12
0.14
0.16
0.18
0.21
0.23
0.26
0.28
0.34
0.39
0.45
0.52
0.58
0.65
0.72
0.80
1.00
0.05
0.22
0.28
0.36
0.44
0.48
0.52
0.55
0.58
0.62
0.66
0.71
0.76
0.85
0.94
1.00
0.03
0.12
0.16
0.20
0.25
0.30
0.35
0.38
0.40
0.41
0.43
0.45
0.47
0.50
0.54
0.58
0.62
0.67
0.72
0.77
0.83
1.00
0.02
0.10
0.13
0.16
0.20
0.24
0.28
0.32
0.36
0.37
0.38
0.39
0.41
0.44
0.46
0.49
0.52
0.55
0.59
0.62
0.66
0.82
0.99
1.00
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.60
0.63
0.65
0.67
0.70
0.74
0.78
0.81
0.85
0.89
0.92
0.95
0.98
1.00
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.64
0.67
0.70
0.73
0.76
0.79
0.81
0.91
1.00
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.66
0.68
0.71
0.73
0.76
0.85
0.93
1.00

18

30 M
Uncracked
Concrete
Embedment hef
mm
45
150
175
200
225
250
275
300
325
350
375
400
450
500
550
600
650
700
750
800
900
1000
1200
>1500
1
2
3
4
Spacing Factor in
Tension
fAN

in Tension
fRN
Spacing Factor in
Shear3
fAV
Toward Edge
To Edge
fRV
fRV
Conc. Thickness
Factor in Shear4
fHV
260
455
598
260
455
598
260
455
598
260
455
598
260
455
598
260
455
598
n/a
0.60
0.61
0.63
0.64
0.66
0.68
0.69
0.71
0.72
0.74
0.76
0.79
0.82
0.85
0.88
0.92
0.95
0.98
1.00
n/a
0.55
0.56
0.57
0.58
0.59
0.60
0.61
0.62
0.63
0.64
0.65
0.66
0.68
0.70
0.72
0.74
0.76
0.77
0.79
0.83
0.87
0.94
1.00
n/a
0.54
0.55
0.56
0.56
0.57
0.58
0.58
0.59
0.60
0.60
0.61
0.63
0.64
0.65
0.67
0.68
0.70
0.71
0.72
0.75
0.78
0.83
0.92
0.23
0.33
0.36
0.39
0.42
0.45
0.48
0.51
0.55
0.59
0.63
0.67
0.76
0.84
0.92
1.00
0.13
0.18
0.20
0.21
0.23
0.25
0.26
0.28
0.30
0.32
0.35
0.37
0.42
0.46
0.51
0.55
0.60
0.65
0.69
0.74
0.83
0.92
1.00
0.09
0.14
0.15
0.16
0.17
0.19
0.20
0.21
0.23
0.24
0.26
0.28
0.31
0.35
0.38
0.42
0.45
0.49
0.52
0.55
0.62
0.69
0.83
1.00
n/a
0.54
0.55
0.55
0.56
0.57
0.57
0.58
0.59
0.59
0.60
0.61
0.62
0.63
0.64
0.66
0.67
0.68
0.70
0.71
0.74
0.76
0.82
0.89
n/a
0.53
0.53
0.53
0.54
0.54
0.55
0.55
0.56
0.56
0.56
0.57
0.58
0.59
0.59
0.60
0.61
0.62
0.63
0.64
0.65
0.67
0.71
0.76
n/a
0.52
0.52
0.53
0.53
0.54
0.54
0.54
0.55
0.55
0.55
0.56
0.56
0.57
0.58
0.59
0.59
0.60
0.61
0.61
0.63
0.64
0.67
0.71
0.02
0.12
0.14
0.18
0.21
0.25
0.29
0.33
0.37
0.41
0.45
0.50
0.60
0.70
0.81
0.92
1.00
0.01
0.06
0.08
0.09
0.11
0.13
0.15
0.17
0.19
0.22
0.24
0.26
0.31
0.37
0.42
0.48
0.54
0.61
0.67
0.74
0.89
1.00
0.01
0.05
0.06
0.07
0.08
0.10
0.11
0.13
0.15
0.16
0.18
0.20
0.24
0.28
0.32
0.37
0.41
0.46
0.51
0.57
0.67
0.79
1.00
0.04
0.23
0.29
0.35
0.42
0.48
0.51
0.54
0.57
0.60
0.63
0.67
0.76
0.84
0.92
1.00
0.02
0.12
0.15
0.19
0.22
0.26
0.30
0.34
0.38
0.41
0.42
0.44
0.47
0.50
0.54
0.57
0.61
0.65
0.69
0.74
0.83
0.92
1.00
0.02
0.09
0.12
0.14
0.17
0.20
0.23
0.26
0.29
0.33
0.36
0.37
0.40
0.42
0.44
0.47
0.49
0.52
0.54
0.57
0.62
0.69
0.83
1.00
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.61
0.63
0.65
0.69
0.72
0.76
0.79
0.83
0.86
0.89
0.92
0.97
1.00
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.61
0.64
0.67
0.69
0.72
0.74
0.78
0.83
0.91
1.00
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.63
0.65
0.68
0.72
0.75
0.83
0.92

19

with Hilti HAS Threaded
Rod
Dry
Concrete
Uncracked
Concrete
Water Saturated
Concrete
Permissible
Drilling
Method
Permissible
Concrete
Conditions
Hilti HAS Threaded Rod Installation Conditions

Tipped Drill Bit
Hilti HAS Threaded Rod Installation Specifications

Nominal
Rod
Diameter
Drill Bit
Diameter
Embedment
Depth
Embedment
Depth Range
Maximum
Installation
Torque
Minimum
Base Material
Thickness
d
in (mm)
d0
in
hef ,std
in (mm)
hef
in (mm)
Tmax
ft-lb (Nm)
hmin
in (mm)
3-3/8
(86)
4-1/2
(114)
5-5/8
(143)
6-3/4
(171)
7-7/8
(200)
9
(229)
11-1/4
(286)
2-3/8 7-1/2
(60 191)
2-3/4 10
(70 254)
3-1/8 12-1/2
(79 318)
3-1/2 15
(89 381)
3-1/2 17-1/2
(89 445)
4 20
(102 508)
5 25
(127 635)
15
(20)
30
(41)
60
(81)
100
(136)
125
(169)
150
(203)
200
(271)
3/8
(9.5)
1/2
(12.7)
5/8
(15.9)
3/4
(19.1)
7/8
(22.2)
1
(25.4)
1-1/4
(31.8)
df
7/16
9/16
3/4
7/8
1
1-1/8
1-3/8
HAS
hef + 1-1/4
(hef + 30)
min
hef + 2d0
max
3/8
1/2
5/8
3/4
7/8
1-1/4
df,1
1/2
5/8
13/16*
15/16*
1-1/8*
1-1/4*
1-1/2*
df,2
7/16
9/16
11/16
13/16
15/16
1-1/8*
1-3/8
* Use two washers
Mechanical Properties
Hilti HAS Threaded Rod Material Specifications
Min. futa
fya
ksi
(MPa)
ksi
(MPa)
Standard HAS-E rod material meets the requirements of ISO 898 Class 5.8
58
(400)
72.5
(500)
High Strength or Super HAS rod material meets the requirements of ASTM A 193, Grade B7
105
(724)
125
(862)
Stainless HAS rod material meets the requirements of ASTM F 593 (AISI 304/316) Condition
CW1 3/8" to 5/8"
65
(448)
100
(689)
Stainless HAS rod material meets the requirements of ASTM F 593 (AISI 304/316) Condition CW
3/4" to 1-1/4"
45
(310)
85
(586)
HAS Super & HAS-E Standard Nut Material meets the requirements of SAE J995 Grade 5
HAS Stainless Steel Nut material meets the requirements of ASTM F 594
HAS Standard and Stainless Steel Washers meet dimensional requirements of ANSI B18.22.1 Type A Plain
HAS Stainless Steel Washers meet the requirements of AISI 304 or AISI 316 conforming to ASTM A 240
HAS Super & HAS-E Standard Washers meet the requirements of ASTM F 884, HV
All HAS Super Rods (except 7/8) & HAS-E Standard, nuts & washers are zinc plated to ASTM B 633 SC 1
7/8 HAS Super rods hot-dip galvanized in accordance with ASTM A 153
HAS Carbon steel HAS rods are furnished with a 0.005-mm-thick zinc electroplated coating
Note: Special Order threaded rods may vary from standard materials.
20

Table 18 Hilti HIT-HY 100 Adhesive Design Strength (Factored Resistance) with Concrete / Bond Failure
for Fractional Threaded Rod in Uncracked Concrete 1,2,3,4,5,6,7,8
Anchor
Diameter
in. (mm)
3/8
(9.5)
1/2
(12.7)
5/8
(15.9)
3/4
(19.1)
7/8
(22.2)
1
(25.4)
1-1/4
(31.8)
1
2
3
4
5
6
7
8
Tension Nn or Nr
Shear Vn or Vr
Effective
Embedment
Depth
in. (mm)
fc = 2500 psi
(17.2 Mpa)
lb (kN)
fc = 3000 psi
(20.7 Mpa)
lb (kN)
fc = 4000 psi
(27.6 Mpa)
lb (kN)
fc = 6000 psi
(41.4 Mpa)
lb (kN)
fc = 2500 psi
(17.2 Mpa)
lb (kN)
fc = 3000 psi
(20.7 Mpa)
lb (kN)
fc = 4000 psi
(27.6 Mpa)
lb (kN)
fc = 6000 psi
(41.4 Mpa)
lb (kN)
2-3/8
(60)
3-3/8
(86)
4-1/2
(114)
7-1/2
(191)
2-3/4
(70)
4-1/2
(114)
6
(152)
10
(254)
3-1/8
(79)
5-5/8
(143)
7-1/2
(191)
12-1/2
(318)
3-1/2
(89)
6-3/4
(171)
9
(229)
15
(381)
3-1/2
(89)
7-7/8
(200)
10-1/2
(267)
17-1/2
(445)
4
(102)
9
(229)
12
(305)
20
(508)
5
(127)
11-1/4
(286)
15
(381)
25
(635)
2,765
(12.3)
3,930
(17.5)
5,240
(23.3)
8,730
(38.8)
3,555
(15.8)
7,395
(32.9)
9,865
(43.9)
16,440
(73.1)
4,310
(19.2)
10,405
(46.3)
16,020
(71.3)
26,960
(119.9)
5,105
(22.7)
13,680
(60.9)
21,060
(93.7)
39,055
(173.7)
5,105
(22.7)
17,235
(76.7)
26,540
(118.1)
47,215
(210.0)
6,240
(27.8)
21,060
(93.7)
32,425
(144.2)
56,770
(252.5)
8,720
(38.8)
27,945
(124.3)
37,255
(165.7)
62,095
(276.2)
2,765
(12.3)
3,930
(17.5)
5,240
(23.3)
8,730
(38.8)
3,895
(17.3)
7,395
(32.9)
9,865
(43.9)
16,440
(73.1)
4,720
(21.0)
11,400
(50.7)
16,175
(71.9)
26,960
(119.9)
5,595
(24.9)
14,985
(66.7)
23,070
(102.6)
39,055
(173.7)
5,595
(24.9)
18,885
(84.0)
28,330
(126.0)
47,215
(210.0)
6,835
(30.4)
23,070
(102.6)
34,060
(151.5)
56,770
(252.5)
9,555
(42.5)
27,945
(124.3)
37,255
(165.7)
62,095
(276.2)
2,765
(12.3)
3,930
(17.5)
5,240
(23.3)
8,730
(38.8)
4,500
(20.0)
7,395
(32.9)
9,865
(43.9)
16,440
(73.1)
5,450
(24.2)
12,135
(54.0)
16,175
(71.9)
26,960
(119.9)
6,460
(28.7)
17,305
(77.0)
23,430
(104.2)
39,055
(173.7)
6,460
(28.7)
21,245
(94.5)
28,330
(126.0)
47,215
(210.0)
7,895
(35.1)
25,545
(113.6)
34,060
(151.5)
56,770
(252.5)
11,030
(49.1)
27,945
(124.3)
37,255
(165.7)
62,095
(276.2)
2,930
(13.0)
4,165
(18.5)
5,550
(24.7)
9,255
(41.2)
4,790
(21.3)
7,840
(34.9)
10,455
(46.5)
17,425
(77.5)
6,675
(29.7)
12,860
(57.2)
17,145
(76.3)
28,580
(127.1)
7,910
(35.2)
18,630
(82.9)
24,840
(110.5)
41,395
(184.1)
7,910
(35.2)
22,520
(100.2)
30,030
(133.6)
50,050
(222.6)
9,665
(43.0)
27,080
(120.5)
36,105
(160.6)
60,175
(267.7)
13,165
(58.6)
29,620
(131.8)
39,495
(175.7)
65,820
(292.8)
2,975
(13.2)
8,460
(37.6)
11,280
(50.2)
18,800
(83.6)
7,660
(34.1)
15,935
(70.9)
21,245
(94.5)
35,405
(157.5)
9,280
(41.3)
22,415
(99.7)
34,505
(153.5)
58,070
(258.3)
11,000
(48.9)
29,460
(131.0)
45,360
(201.8)
84,115
(374.2)
11,000
(48.9)
37,125
(165.1)
57,160
(254.3)
101,695
(452.4)
13,440
(59.8)
45,360
(201.8)
69,835
(310.6)
122,270
(543.9)
18,785
(83.6)
63,395
(282.0)
94,835
(421.8)
158,060
(703.1)
2,975
(13.2)
8,460
(37.6)
11,280
(50.2)
18,800
(83.6)
8,395
(37.3)
15,935
(70.9)
21,245
(94.5)
35,405
(157.5)
10,165
(45.2)
24,550
(109.2)
34,840
(155.0)
58,070
(258.3)
12,050
(53.6)
32,275
(143.6)
49,690
(221.0)
84,115
(374.2)
12,050
(53.6)
40,670
(180.9)
61,015
(271.4)
101,695
(452.4)
14,725
(65.5)
49,690
(221.0)
73,360
(326.3)
122,270
(543.9)
20,575
(91.5)
69,445
(308.9)
94,835
(421.8)
158,060
(703.1)
2,975
(13.2)
8,460
(37.6)
11,280
(50.2)
18,800
(83.6)
9,690
(43.1)
15,935
(70.9)
21,245
(94.5)
35,405
(157.5)
11,740
(52.2)
26,130
(116.2)
34,840
(155.0)
58,070
(258.3)
13,915
(61.9)
37,265
(165.8)
50,470
(224.5)
84,115
(374.2)
13,915
(61.9)
45,765
(203.6)
61,015
(271.4)
101,695
(452.4)
17,000
(75.6)
55,020
(244.7)
73,360
(326.3)
122,270
(543.9)
23,760
(105.7)
71,130
(316.4)
94,835
(421.8)
158,060
(703.1)
3,155
(14.0)
8,970
(39.9)
11,960
(53.2)
19,930
(88.7)
10,320
(45.9)
16,890
(75.1)
22,520
(100.2)
37,530
(166.9)
14,380
(64.0)
27,700
(123.2)
36,935
(164.3)
61,555
(273.8)
17,040
(75.8)
40,125
(178.5)
53,500
(238.0)
89,165
(396.6)
17,040
(75.8)
48,510
(215.8)
64,680
(287.7)
107,795
(479.5)
20,820
(92.6)
58,325
(259.4)
77,765
(345.9)
129,605
(576.5)
29,100
(129.4)
75,395
(335.4)
100,525
(447.2)
167,545
(745.3)

Apply spacing, edge distance, and concrete thickness factors in tables 21 - 27 as necessary. Compare to the steel values in table 19 or 20.
periods of time.
Tabular values are for dry concrete conditions. For water saturated concrete multiply design strength (factored resistance) by 0.85.
21

Table 19 Steel Design Strength (ACI 318 Appendix D Based Design) for Hilti HAS Threaded Rods 3
Anchor
Diameter
in. (mm)
3/8
(9.5)
1/2
(12.7)
5/8
(15.9)
3/4
(19.1)
7/8
(22.2)
1
(25.4)
1-1/4
(31.8)
1
2
3
4
HAS Standard ISO 898 Class 5.8 4
HAS-Super ASTM A193 B7 4
HAS SS AISI 304/316 SS 4
Tensile
Nsa
lb (kN)
Shear
Vsa
lb (kN)
Tensile
Nsa
lb (kN)
Shear
Vsa
lb (kN)
Tensile1
Nsa
lb (kN)
Shear2
Vsa
lb (kN)
3,655
(16.3)
6,690
(29.8)
10,650
(47.4)
15,765
(70.1)
21,755
(96.8)
28,540
(127.0)
45,670
(203.1)
1,685
(7.5)
3,705
(16.5)
5,900
(26.2)
8,730
(38.8)
12,050
(53.6)
15,805
(70.3)
25,295
(112.5)
7,265
(32.3)
13,300
(59.2)
21,190
(94.3)
31,360
(139.5)
43,285
(192.5)
56,785
(252.6)
90,850
(404.1)
3,150
(14.0)
6,915
(30.8)
11,020
(49.0)
16,305
(72.5)
22,505
(100.1)
29,525
(131.3)
47,240
(210.1)
5,040
(22.4)
9,225
(41.0)
14,690
(65.3)
18,480
(82.2)
25,510
(113.5)
33,465
(148.9)
53,540
(238.2)
2,325
(10.3)
5,110
(22.7)
8,135
(36.2)
10,235
(45.5)
14,125
(62.8)
18,535
(82.4)
29,655
(131.9)
Tensile = Ase,N futa as noted in ACI 318 Appendix D

HAS Super rods are considered ductile steel elements. HAS Standard and HAS SS rods are considered brittle steel elements.
Table 20 Steel Factored Resistance (CSA A23.3 Annex D Based Design) for Hilti HAS Threaded Rods 3
Anchor
Diameter
in. (mm)
3/8
(9.5)
1/2
(12.7)
5/8
(15.9)
3/4
(19.1)
7/8
(22.2)
1
(25.4)
1-1/4
(31.8)
1
2
3
4
HAS Standard ISO 898 Class 5.8 4
HAS-Super ASTM A193 B7 4
HAS SS AISI 304/316 SS 4
Tensile
Nsr
lb (kN)
Shear
Vsr
lb (kN)
Tensile
Nsr
lb (kN)
Shear
Vsr
lb (kN)
Tensile1
Nsr
lb (kN)
Shear2
Vsr
lb (kN)
3,345
(14.9)
6,125
(27.2)
9,750
(43.4)
14,430
(64.2)
19,915
(88.6)
26,125
(116.2)
41,805
(186.0)
1,555
(6.9)
3,410
(15.2)
5,430
(24.2)
8,040
(35.8)
11,095
(49.4)
14,555
(64.7)
23,290
(103.6)
6,585
(29.3)
12,060
(53.6)
19,210
(85.4)
28,430
(126.5)
39,245
(174.6)
51,485
(229.0)
82,370
(366.4)
3,090
(13.7)
6,785
(30.2)
10,805
(48.1)
15,990
(71.1)
22,075
(98.2)
28,960
(128.8)
46,335
(206.1)
4,610
(20.5)
8,445
(37.6)
13,445
(59.8)
16,915
(75.2)
23,350
(103.9)
30,635
(136.3)
49,010
(218.0)
2,140
(9.5)
4,705
(20.9)
7,490
(33.3)
9,425
(41.9)
13,010
(57.9)
17,065
(75.9)
27,305
(121.5)
Tensile = Ase s fut R as noted in CSA A23.3 Annex D

Shear = Ase s 0.60 fut R as noted in CSA A23.3 Annex D
HAS Super rods are considered ductile steel elements. HAS Standard and HAS SS rods are considered brittle steel elements.
22

Table 21 Load Adjustment Factors for 3/8-in. Diameter Fractional Threaded Rods in Uncracked Concrete 1,2
3/8 in
Uncracked
Concrete
Embedment hef
in (mm)
1-3/4
(44)
1-7/8
(48)
2
(51)
3
(76)
3-5/8
(92)
4
(102)
4-5/8 (117)
5
(127)
5-3/4 (146)
6
(152)
7
(178)
8
(203)
8-3/4 (222)
9
(229)
10
(254)
11
(279)
12
(305)
14
(356)
16
(406)
18
(457)
24
(610)
30
(762)
36
(914)
>48 (1219)
Spacing Factor in
Tension
fAN
2-3/8
(60)
n/a
0.60
0.61
0.66
0.70
0.72
0.75
0.77
0.81
0.82
0.88
0.93
0.97
0.99
1.00
3-3/8
(86)
n/a
0.59
0.60
0.65
0.68
0.70
0.73
0.75
0.78
0.80
0.85
0.90
0.93
0.94
0.99
1.00
4-1/2
(114)
n/a
0.57
0.57
0.61
0.63
0.65
0.67
0.69
0.71
0.72
0.76
0.80
0.82
0.83
0.87
0.91
0.94
1.00
7-1/2
(191)
n/a
0.54
0.54
0.57
0.58
0.59
0.60
0.61
0.63
0.63
0.66
0.68
0.69
0.70
0.72
0.74
0.77
0.81
0.86
0.90
1.00

in Tension
fRN
2-3/8
(60)
0.40
0.42
0.43
0.56
0.65
0.72
0.83
0.90
1.00
3-3/8
(86)
0.31
0.32
0.33
0.41
0.46
0.49
0.55
0.60
0.69
0.72
0.84
0.96
1.00
4-1/2
(114)
0.23
0.23
0.24
0.30
0.34
0.36
0.40
0.44
0.50
0.52
0.61
0.70
0.76
0.78
0.87
0.96
1.00
7-1/2
(191)
0.13
0.13
0.14
0.17
0.19
0.21
0.23
0.25
0.29
0.30
0.35
0.40
0.44
0.45
0.50
0.55
0.61
0.71
0.81
0.91
1.00
Spacing Factor in
Shear3
fAV
2-3/8
(60)
n/a
0.57
0.57
0.61
0.63
0.65
0.67
0.68
0.71
0.72
0.75
0.79
0.82
0.83
0.86
0.90
0.94
1.00
3-3/8
(86)
n/a
0.54
0.54
0.56
0.57
0.57
0.59
0.59
0.61
0.61
0.63
0.65
0.66
0.67
0.69
0.71
0.72
0.76
0.80
0.84
0.95
1.00
4-1/2
(114)
n/a
0.53
0.53
0.55
0.56
0.56
0.57
0.58
0.59
0.59
0.61
0.62
0.64
0.64
0.65
0.67
0.69
0.72
0.75
0.78
0.87
0.96
1.00
7-1/2
(191)
n/a
0.52
0.52
0.53
0.54
0.54
0.55
0.55
0.56
0.57
0.58
0.59
0.60
0.60
0.61
0.62
0.63
0.65
0.68
0.70
0.76
0.83
0.90
1.00
Toward Edge
To Edge
fRV
fRV
2-3/8 3-3/8 4-1/2 7-1/2 2-3/8 3-3/8 4-1/2
(60) (86) (114) (191) (60) (86) (114)
0.24 0.09 0.07 0.04 0.47 0.17 0.13
0.26 0.10 0.07 0.04 0.42 0.19 0.14
0.29 0.11 0.08 0.05 0.43 0.21 0.16
0.53 0.20 0.15 0.09 0.56 0.39 0.29
0.70 0.26 0.19 0.12 0.65 0.48 0.39
0.82 0.30 0.23 0.14 0.72 0.51 0.41
1.00 0.37 0.28 0.17 0.83 0.56 0.45
0.42 0.32 0.19 0.90 0.60 0.47
0.52 0.39 0.23 1.00 0.69 0.52
0.55 0.41 0.25
0.72 0.54
0.70 0.52 0.31
0.84 0.61
0.85 0.64 0.38
0.96 0.70
0.97 0.73 0.44
1.00 0.76
1.00 0.76 0.46
0.78
0.89 0.54
0.87
1.00 0.62
0.96
0.70
1.00
0.89
1.00
Conc. Thickness
Factor in Shear4
fHV
7-1/2
(191)
0.08
0.09
0.10
0.18
0.23
0.27
0.33
0.34
0.37
0.37
0.41
0.44
0.47
0.48
0.52
0.56
0.61
0.71
0.81
0.91
1.00
2-3/8
(60)
n/a
n/a
n/a
n/a
0.73
0.76
0.82
0.85
0.91
0.93
1.00
3-3/8
(86)
n/a
n/a
n/a
n/a
n/a
n/a
0.59
0.61
0.66
0.67
0.72
0.77
0.81
0.82
0.87
0.91
0.95
1.00
4-1/2
(114)
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.60
0.61
0.66
0.70
0.74
0.75
0.79
0.82
0.86
0.93
0.99
1.00
7-1/2
(191)
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.62
0.63
0.66
0.70
0.73
0.78
0.84
0.89
1.00
1/2 in
Uncracked
Concrete
Embedment hef
in (mm)
1-3/4
(44)
2-1/2
(64)
3
(76)
4
(102)
5
(127)
5-3/4 (146)
6
(152)
7
(178)
7-1/4 (184)
8
(203)
9
(229)
10
(254)
11-1/4 (286)
12
(305)
14
(356)
16
(406)
18
(457)
20
(508)
22
(559)
24
(610)
30
(762)
36
(914)
>48 (1219)
1
2
3
4
Spacing Factor in
Tension
fAN
2-3/4
(70)
n/a
0.60
0.62
0.66
0.70
0.73
0.74
0.78
0.79
0.82
0.85
0.89
0.94
0.97
1.00
4-1/2
(114)
n/a
0.59
0.61
0.65
0.69
0.71
0.72
0.76
0.77
0.80
0.83
0.87
0.92
0.94
1.00
6
(152)
n/a
0.57
0.58
0.61
0.64
0.66
0.67
0.69
0.70
0.72
0.75
0.78
0.81
0.83
0.89
0.94
1.00
10
(254)
n/a
0.54
0.55
0.57
0.58
0.60
0.60
0.62
0.62
0.63
0.65
0.67
0.69
0.70
0.73
0.77
0.80
0.83
0.87
0.90
1.00

in Tension
fRN
2-3/4
(70)
0.36
0.43
0.48
0.59
0.74
0.85
0.88
1.00
4-1/2
(114)
0.27
0.31
0.33
0.39
0.45
0.50
0.52
0.60
0.62
0.68
0.77
0.85
0.96
1.00
6
(152)
0.20
0.23
0.25
0.29
0.33
0.37
0.38
0.44
0.45
0.50
0.56
0.62
0.70
0.75
0.87
1.00
10
(254)
0.12
0.13
0.14
0.17
0.19
0.21
0.22
0.26
0.26
0.29
0.33
0.37
0.41
0.44
0.51
0.58
0.66
0.73
0.80
0.88
1.00
Spacing Factor in
Shear 3
fAV
2-3/4
(70)
n/a
0.55
0.56
0.58
0.60
0.62
0.63
0.65
0.65
0.67
0.69
0.71
0.74
0.75
0.79
0.83
0.88
0.92
0.96
1.00
4-1/2
(114)
n/a
0.53
0.54
0.55
0.57
0.58
0.58
0.59
0.60
0.61
0.62
0.64
0.65
0.66
0.69
0.72
0.74
0.77
0.80
0.82
0.91
0.99
1.00
6
(152)
n/a
0.53
0.53
0.54
0.56
0.56
0.57
0.58
0.58
0.59
0.60
0.61
0.63
0.63
0.66
0.68
0.70
0.72
0.75
0.77
0.83
0.90
1.00
10
(254)
n/a
0.52
0.52
0.53
0.54
0.55
0.55
0.56
0.56
0.56
0.57
0.58
0.59
0.60
0.61
0.63
0.64
0.66
0.67
0.69
0.74
0.79
0.88
Toward Edge
To Edge
fRV
fRV
2-3/4 4-1/2 6
10 2-3/4 4-1/2 6
(70) (114) (152) (254) (70) (114) (152)
0.10 0.05 0.04 0.02 0.21 0.11 0.08
0.18 0.09 0.07 0.04 0.35 0.18 0.14
0.23 0.12 0.09 0.05 0.46 0.24 0.18
0.36 0.18 0.14 0.08 0.59 0.37 0.28
0.50 0.26 0.19 0.12 0.74 0.46 0.38
0.61 0.32 0.24 0.14 0.85 0.51 0.41
0.65 0.34 0.25 0.15 0.88 0.52 0.42
0.82 0.43 0.32 0.19 1.00 0.60 0.47
0.87 0.45 0.34 0.20
0.62 0.48
1.00 0.52 0.39 0.23
0.68 0.51
0.62 0.47 0.28
0.77 0.56
0.73 0.55 0.33
0.85 0.62
0.87 0.65 0.39
0.96 0.70
0.96 0.72 0.43
1.00 0.75
1.00 0.91 0.54
0.87
1.00 0.66
1.00
0.79
0.93
1.00
Conc. Thickness
Factor in Shear4
fHV
10
(254)
0.05
0.08
0.11
0.17
0.23
0.29
0.31
0.34
0.34
0.36
0.39
0.41
0.44
0.46
0.52
0.58
0.66
0.73
0.80
0.88
1.00
2-3/4
(70)
n/a
n/a
n/a
0.58
0.65
0.69
0.71
0.77
0.78
0.82
0.87
0.92
0.97
1.00
4-1/2
(114)
n/a
n/a
n/a
n/a
n/a
0.56
0.57
0.61
0.63
0.66
0.70
0.74
0.78
0.81
0.87
0.93
0.99
1.00
6
(152)
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.57
0.60
0.63
0.67
0.71
0.73
0.79
0.84
0.90
0.94
0.99
1.00
10
(254)
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.60
0.62
0.67
0.71
0.76
0.80
0.84
0.87
0.98
1.00

Shaded area with reduced edge distance is permitted provided the installation torque is reduced to 0.30 Tmax for 5d s 16-in. and to 0.5 Tmax for s > 16-in.
23

5/8 in
Uncracked
Concrete
Embedment hef
in (mm)
1-3/4
(44)
3-1/8
(79)
4
(102)
4-5/8 (117)
5
(127)
6
(152)
7
(178)
7-1/8 (181)
8
(203)
9
(229)
10
(254)
11
(279)
12
(305)
14
(356)
16
(406)
18
(457)
20
(508)
22
(559)
24
(610)
26
(660)
28
(711)
30
(762)
36
(914)
>48 (1219)
Spacing Factor in
Tension
fAN
3-1/8
(79)
n/a
0.60
0.62
0.64
0.65
0.68
0.72
0.72
0.75
0.78
0.81
0.84
0.87
0.93
0.99
1.00
5-5/8
(143)
n/a
0.59
0.62
0.64
0.65
0.68
0.71
0.71
0.74
0.77
0.80
0.83
0.86
0.91
0.97
1.00
7-1/2 12-1/2
(191) (318)
n/a n/a
0.57 0.54
0.59 0.55
0.60 0.56
0.61 0.57
0.63 0.58
0.66 0.59
0.66 0.60
0.68 0.61
0.70 0.62
0.72 0.63
0.74 0.65
0.77 0.66
0.81 0.69
0.86 0.71
0.90 0.74
0.94 0.77
0.99 0.79
1.00 0.82
0.85
0.87
0.90
0.98
1.00

in Tension
fRN
3-1/8
(79)
0.34
0.45
0.53
0.60
0.64
0.77
0.89
0.90
0.99
1.00
5-5/8
(143)
0.25
0.31
0.34
0.37
0.39
0.43
0.48
0.49
0.53
0.60
0.67
0.73
0.80
0.93
1.00
7-1/2 12-1/2
(191) (318)
0.18 0.11
0.22 0.13
0.25 0.15
0.27 0.16
0.28 0.17
0.32 0.19
0.35 0.21
0.36 0.21
0.39 0.23
0.44 0.26
0.49 0.29
0.54 0.31
0.59 0.34
0.68 0.40
0.78 0.46
0.88 0.51
0.98 0.57
1.00 0.63
0.69
0.74
0.80
0.86
1.00
Spacing Factor in
Shear3
fAV
3-1/8
(79)
n/a
0.56
0.58
0.59
0.60
0.62
0.64
0.64
0.66
0.68
0.70
0.72
0.74
0.77
0.81
0.85
0.89
0.93
0.97
1.00
5-5/8
(143)
n/a
0.54
0.55
0.55
0.56
0.57
0.58
0.58
0.59
0.60
0.62
0.63
0.64
0.66
0.69
0.71
0.73
0.75
0.78
0.80
0.82
0.85
0.92
1.00
7-1/2 12-1/2
(191) (318)
n/a n/a
0.53 0.52
0.53 0.52
0.54 0.53
0.54 0.53
0.55 0.54
0.56 0.54
0.56 0.54
0.57 0.55
0.58 0.56
0.59 0.56
0.60 0.57
0.60 0.57
0.62 0.59
0.64 0.60
0.66 0.61
0.67 0.62
0.69 0.64
0.71 0.65
0.73 0.66
0.74 0.67
0.76 0.68
0.81 0.72
0.92 0.79
Toward Edge
To Edge
fRV
fRV
3-1/8 5-5/8 7-1/2 12-1/2 3-1/8 5-5/8 7-1/2 12-1/2
(79) (143) (191) (318) (79) (143) (191) (318)
0.09 0.04 0.03 0.02 0.19 0.08 0.06 0.03
0.22 0.10 0.07 0.04 0.45 0.20 0.13 0.08
0.32 0.15 0.10 0.06 0.53 0.29 0.19 0.11
0.40 0.18 0.12 0.07 0.60 0.36 0.24 0.14
0.45 0.21 0.13 0.08 0.64 0.39 0.27 0.16
0.59 0.27 0.18 0.10 0.77 0.44 0.35 0.21
0.75 0.34 0.22 0.13 0.90 0.49 0.40 0.26
0.77 0.35 0.23 0.13 0.91 0.49 0.40 0.27
0.91 0.41 0.27 0.16 1.00 0.54 0.43 0.32
1.00 0.50 0.32 0.19
0.60 0.46 0.33
0.58 0.38 0.22
0.67 0.50 0.35
0.67 0.43 0.26
0.73 0.54 0.37
0.76 0.50 0.29
0.80 0.59 0.39
0.96 0.62 0.37
0.93 0.68 0.43
1.00 0.76 0.45
1.00 0.78 0.48
0.91 0.54
0.88 0.52
1.00 0.63
0.98 0.57
0.73
1.00 0.63
0.83
0.69
0.94
0.74
1.00
0.80
0.86
1.00
Conc. Thickness
Factor in Shear4
fHV
3-1/8
(79)
n/a
n/a
n/a
0.60
0.63
0.69
0.74
0.75
0.79
0.84
0.89
0.93
0.97
1.00
5-5/8
(143)
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.57
0.61
0.65
0.68
0.71
0.75
0.81
0.86
0.91
0.96
1.00
7-1/2 12-1/2
(191) (318)
n/a n/a
n/a n/a
n/a n/a
n/a n/a
n/a n/a
n/a n/a
n/a n/a
n/a n/a
n/a n/a
0.56 n/a
0.59 n/a
0.62 n/a
0.65 n/a
0.70 0.59
0.75 0.63
0.79 0.67
0.83 0.70
0.87 0.74
0.91 0.77
0.95 0.80
0.99 0.83
1.00 0.86
0.94
1.00
3/4 in
Uncracked
Concrete
Embedment hef
in (mm)
1-3/4
(44)
3-3/4
(95)
4
(102)
5
(127)
5-1/4 (133)
6
(152)
7
(178)
8
(203)
8-1/2 (216)
9
(229)
10
(254)
10-3/4 (273)
(305)
12
14
(356)
16
(406)
16-3/4 (425)
18
(457)
20
(508)
22
(559)
24
(610)
26
(660)
28
(711)
30
(762)
36
(914)
>48 (1219)
1
2
3
4
Spacing Factor in
Tension
fAN
3-1/2 6-3/4
(89) (171)
n/a n/a
0.60 0.59
0.60 0.60
0.63 0.62
0.63 0.63
0.65 0.65
0.68 0.67
0.70 0.70
0.72 0.71
0.73 0.72
0.76 0.75
0.77 0.77
0.81 0.80
0.86 0.85
0.91 0.90
0.93 0.91
0.96 0.94
1.00 0.99
1.00
9
(229)
n/a
0.57
0.57
0.59
0.60
0.61
0.63
0.65
0.66
0.67
0.69
0.70
0.72
0.76
0.80
0.81
0.83
0.87
0.91
0.94
0.98
1.00
15
(381)
n/a
0.54
0.54
0.56
0.56
0.57
0.58
0.59
0.59
0.60
0.61
0.62
0.63
0.66
0.68
0.69
0.70
0.72
0.74
0.77
0.79
0.81
0.83
0.90
1.00

in Tension
fRN
3-1/2 6-3/4
(89) (171)
0.33 0.24
0.49 0.30
0.51 0.31
0.60 0.35
0.63 0.36
0.71 0.38
0.78 0.42
0.86 0.46
0.90 0.48
0.94 0.51
1.00 0.55
0.59
0.66
0.77
0.88
0.92
0.99
1.00
9
(229)
0.18
0.22
0.23
0.26
0.26
0.28
0.31
0.34
0.36
0.37
0.41
0.44
0.49
0.57
0.65
0.68
0.73
0.81
0.89
0.97
1.00
15
(381)
0.10
0.13
0.13
0.15
0.15
0.17
0.18
0.20
0.21
0.22
0.24
0.26
0.29
0.33
0.38
0.40
0.43
0.48
0.52
0.57
0.62
0.67
0.71
0.86
1.00
Spacing Factor in
Shear3
fAV
3-1/2 6-3/4
(89) (171)
n/a n/a
0.57 0.54
0.57 0.54
0.59 0.55
0.60 0.55
0.61 0.56
0.63 0.57
0.65 0.58
0.66 0.59
0.67 0.59
0.68 0.60
0.70 0.61
0.72 0.62
0.76 0.64
0.79 0.66
0.81 0.67
0.83 0.68
0.87 0.70
0.91 0.72
0.94 0.74
0.98 0.76
1.00 0.78
0.80
0.86
0.99
9
(229)
n/a
0.53
0.53
0.54
0.54
0.55
0.55
0.56
0.56
0.57
0.58
0.58
0.59
0.61
0.62
0.63
0.64
0.65
0.67
0.68
0.70
0.71
0.73
0.77
0.86
15
(381)
n/a
0.52
0.52
0.53
0.53
0.53
0.54
0.54
0.54
0.55
0.55
0.55
0.56
0.57
0.58
0.58
0.59
0.60
0.61
0.62
0.63
0.64
0.65
0.68
0.74
Toward Edge
To Edge
fRV
fRV
3-1/2 6-3/4 9
15 3-1/2 6-3/4 9
(89) (171) (229) (381) (89) (171) (229)
0.09 0.03 0.02 0.01 0.17 0.07 0.05
0.27 0.11 0.07 0.04 0.49 0.22 0.14
0.29 0.12 0.08 0.04 0.51 0.24 0.16
0.41 0.17 0.11 0.06 0.60 0.33 0.22
0.44 0.18 0.12 0.06 0.63 0.36 0.23
0.54 0.22 0.14 0.08 0.72 0.39 0.29
0.68 0.28 0.18 0.10 0.84 0.43 0.36
0.83 0.34 0.22 0.12 0.96 0.47 0.38
0.91 0.37 0.24 0.13 1.00 0.49 0.40
0.99 0.40 0.26 0.14
0.51 0.41
1.00 0.47 0.31 0.17
0.55 0.44
0.53 0.34 0.18
0.59 0.46
0.62 0.40 0.22
0.66 0.50
0.78 0.51 0.27
0.77 0.57
0.96 0.62 0.34
0.88 0.65
1.00 0.67 0.36
0.92 0.68
0.74 0.40
0.99 0.73
0.87 0.47
1.00 0.81
1.00 0.54
0.89
0.62
0.97
0.70
1.00
0.78
0.86
1.00
Conc. Thickness
Factor in Shear4
fHV
15
(381)
0.02
0.08
0.08
0.12
0.13
0.15
0.19
0.24
0.26
0.28
0.32
0.33
0.35
0.38
0.42
0.43
0.45
0.49
0.53
0.57
0.62
0.67
0.71
0.86
1.00
3-1/2 6-3/4
(89) (171)
n/a n/a
n/a n/a
n/a n/a
n/a n/a
0.62 n/a
0.66 n/a
0.72 n/a
0.77 n/a
0.79 0.59
0.81 0.60
0.86 0.64
0.89 0.66
0.94 0.70
1.00 0.75
0.80
0.82
0.85
0.90
0.94
0.99
1.00
9
(229)
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.57
0.60
0.65
0.70
0.71
0.74
0.78
0.82
0.85
0.89
0.92
0.95
1.00
15
(381)
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.58
0.60
0.63
0.67
0.69
0.72
0.75
0.78
0.85
0.98

24

7/8 in
Uncracked
Concrete
Embedment hef
in (mm)
1-3/4 (44)
4-3/8 (111)
5
(127)
5-1/2 (140)
6
(152)
7
(178)
8
(203)
9
(229)
9-7/8 (251)
10
(254)
11
(279)
12
(305)
12-1/2 (318)
14
(356)
16
(406)
18
(457)
19-1/2 (495)
20
(508)
22
(559)
24
(610)
26
(660)
28
(711)
30
(762)
36
(914)
>48 (1219)

Conc. Thickness
Factor in Shear4
Toward Edge
To Edge
fHV
fRV
fRV
3-1/2 7-7/8 10-1/2 17-1/2 3-1/2 7-7/8 10-1/2 17-1/2 3-1/2 7-7/8 10-1/2 17-1/2 3-1/2 7-7/8 10-1/2 17-1/2 3-1/2 7-7/8 10-1/2 17-1/2 3-1/2 7-7/8 10-1/2 17-1/2
(89) (200) (267) (445) (89) (200) (267) (445) (89) (200) (267) (445) (89) (200) (267) (445) (89) (200) (267) (445) (89) (200) (267) (445)
n/a n/a n/a n/a 0.36 0.23 0.17 0.10 n/a n/a n/a n/a 0.09 0.03 0.02 0.01 0.18 0.05 0.04 0.02 n/a n/a n/a n/a
0.60 0.59 0.57 0.54 0.58 0.31 0.23 0.13 0.58 0.54 0.53 0.52 0.35 0.11 0.07 0.04 0.60 0.22 0.14 0.08 n/a n/a n/a n/a
0.62 0.61 0.58 0.55 0.61 0.33 0.24 0.14 0.59 0.54 0.53 0.52 0.43 0.13 0.09 0.05 0.66 0.27 0.17 0.10 n/a n/a n/a n/a
0.63 0.62 0.59 0.55 0.65 0.34 0.25 0.15 0.60 0.55 0.54 0.52 0.50 0.15 0.10 0.06 0.72 0.31 0.20 0.11 0.65 n/a n/a n/a
0.64 0.63 0.60 0.56 0.68 0.36 0.26 0.16 0.61 0.55 0.54 0.53 0.57 0.17 0.11 0.06 0.78 0.35 0.23 0.13 0.68 n/a n/a n/a
0.66 0.65 0.61 0.57 0.74 0.39 0.29 0.17 0.63 0.56 0.55 0.53 0.71 0.22 0.14 0.08 0.91 0.41 0.29 0.16 0.73 n/a n/a n/a
0.69 0.67 0.63 0.58 0.81 0.43 0.32 0.18 0.65 0.57 0.55 0.54 0.87 0.27 0.17 0.10 1.00 0.44 0.35 0.20 0.78 n/a n/a n/a
0.71 0.69 0.64 0.59 0.87 0.46 0.34 0.20 0.67 0.58 0.56 0.54 1.00 0.32 0.21 0.12
0.48 0.39 0.23 0.83 n/a n/a n/a
0.73 0.71 0.66 0.59 0.94 0.50 0.37 0.21 0.69 0.59 0.56 0.54
0.37 0.24 0.13
0.51 0.41 0.27 0.87 0.59 n/a n/a
0.73 0.71 0.66 0.60 0.94 0.50 0.37 0.22 0.69 0.59 0.57 0.54
0.38 0.24 0.14
0.51 0.42 0.27 0.87 0.59 n/a n/a
0.76 0.73 0.67 0.60 1.00 0.54 0.40 0.23 0.71 0.60 0.57 0.55
0.43 0.28 0.16
0.55 0.44 0.32 0.91 0.62 n/a n/a
0.78 0.75 0.69 0.61
0.59 0.44 0.26 0.73 0.60 0.58 0.55
0.49 0.32 0.18
0.59 0.47 0.34 0.95 0.65 n/a n/a
0.62 0.45 0.27 0.74 0.61 0.58 0.56
0.52 0.34 0.19
0.62 0.48 0.35 0.97 0.66 0.57 n/a
0.79 0.76 0.70 0.62
0.83 0.80 0.72 0.63
0.69 0.51 0.30 0.77 0.62 0.59 0.56
0.62 0.40 0.23
0.69 0.52 0.37 1.00 0.70 0.60 n/a
0.87 0.84 0.75 0.65
0.79 0.58 0.34 0.80 0.64 0.60 0.57
0.76 0.49 0.28
0.79 0.58 0.40
0.75 0.65 n/a
0.92 0.88 0.79 0.67
0.89 0.66 0.38 0.84 0.66 0.62 0.58
0.91 0.59 0.33
0.89 0.66 0.43
0.79 0.68 n/a
0.95 0.91 0.81 0.69
0.97 0.71 0.42 0.87 0.67 0.63 0.59
1.00 0.66 0.37
0.97 0.71 0.45
0.82 0.71 0.59
0.97 0.92 0.82 0.69
0.99 0.73 0.43 0.88 0.67 0.63 0.59
0.69 0.39
0.99 0.73 0.46
0.83 0.72 0.60
1.00 0.97 0.85 0.71
1.00 0.80 0.47 0.92 0.69 0.64 0.60
0.80 0.45
1.00 0.80 0.49
0.87 0.76 0.62
1.00 0.88 0.73
0.87 0.51 0.96 0.71 0.66 0.61
0.91 0.51
0.87 0.52
0.91 0.79 0.65
0.91 0.75
0.95 0.55 0.99 0.73 0.67 0.62
1.00 0.57
0.95 0.56
0.95 0.82 0.68
0.94 0.77
1.00 0.60 1.00 0.74 0.68 0.62
0.64
1.00 0.60
0.99 0.85 0.70
0.98 0.79
0.64
0.76 0.70 0.63
0.71
0.64
1.00 0.88 0.73
1.00 0.84
0.77
0.81 0.73 0.66
0.94
0.77
0.97 0.80
0.96
1.00
0.92 0.81 0.71
1.00
1.00
1.00 0.92
Spacing Factor in
Tension
fAN

in Tension
fRN
Spacing Factor in
Shear3
fAV
Table 26 Load Adjustment Factors for 1-in. Diameter Fractional Threaded Rods in Uncracked Concrete 1,2
1 in
Uncracked
Concrete
Embedment hef
in (mm)
1-3/4 (44)
5
(127)
6
(152)
6-1/4 (159)
7
(178)
8
(203)
9
(229)
10
(254)
11
(279)
11-1/4 (286)
12
(305)
13
(330)
14
(356)
14-1/4 (362)
16
(406)
18
(457)
20
(508)
22
(559)
22-1/4 (565)
24
(610)
26
(660)
28
(711)
30
(762)
36
(914)
>48 (1219)
1
2
3
4
Spacing Factor in
Tension
fAN
4
(102)
n/a
0.61
0.63
0.63
0.65
0.67
0.69
0.71
0.73
0.74
0.75
0.78
0.80
0.80
0.84
0.88
0.92
0.97
0.97
1.00
9
(229)
n/a
0.59
0.61
0.62
0.63
0.65
0.67
0.69
0.70
0.71
0.72
0.74
0.76
0.76
0.80
0.83
0.87
0.91
0.91
0.94
0.98
1.00
12
(305)
n/a
0.57
0.58
0.59
0.60
0.61
0.63
0.64
0.65
0.66
0.67
0.68
0.69
0.70
0.72
0.75
0.78
0.81
0.81
0.83
0.86
0.89
0.92
1.00
20
(508)
n/a
0.54
0.55
0.55
0.56
0.57
0.58
0.58
0.59
0.59
0.60
0.61
0.62
0.62
0.63
0.65
0.67
0.68
0.69
0.70
0.72
0.73
0.75
0.80
0.90

in Tension
fRN
4
(102)
0.36
0.59
0.64
0.66
0.70
0.76
0.82
0.88
0.95
0.96
1.00
9
(229)
0.23
0.31
0.34
0.35
0.37
0.40
0.43
0.46
0.50
0.51
0.54
0.58
0.63
0.64
0.72
0.80
0.89
0.98
0.99
1.00
12
(305)
0.17
0.23
0.25
0.25
0.27
0.29
0.32
0.34
0.37
0.37
0.39
0.43
0.46
0.47
0.53
0.59
0.66
0.72
0.73
0.79
0.86
0.92
0.99
1.00
20
(508)
0.10
0.13
0.15
0.15
0.16
0.17
0.19
0.20
0.22
0.22
0.23
0.25
0.27
0.27
0.31
0.35
0.39
0.42
0.43
0.46
0.50
0.54
0.58
0.69
0.93
Spacing Factor in
Shear3
fAV
4
(102)
n/a
0.59
0.60
0.61
0.62
0.64
0.65
0.67
0.69
0.69
0.70
0.72
0.74
0.74
0.77
0.81
0.84
0.88
0.88
0.91
0.94
0.98
1.00
9
(229)
n/a
0.54
0.55
0.55
0.55
0.56
0.57
0.58
0.58
0.59
0.59
0.60
0.61
0.61
0.62
0.64
0.65
0.67
0.67
0.68
0.70
0.71
0.73
0.77
0.86
12
(305)
n/a
0.53
0.53
0.54
0.54
0.55
0.55
0.56
0.56
0.56
0.57
0.57
0.58
0.58
0.59
0.60
0.61
0.63
0.63
0.64
0.65
0.66
0.67
0.70
0.77
20
(508)
n/a
0.52
0.52
0.52
0.53
0.53
0.54
0.54
0.54
0.54
0.55
0.55
0.55
0.56
0.56
0.57
0.58
0.59
0.59
0.59
0.60
0.61
0.62
0.64
0.69
Toward Edge
To Edge
fRV
fRV
4
9
12
20
4
9
12
(102) (229) (305) (508) (102) (229) (305)
0.08 0.02 0.01 0.01 0.15 0.05 0.03
0.37 0.11 0.07 0.04 0.61 0.22 0.14
0.48 0.14 0.09 0.05 0.70 0.29 0.19
0.51 0.15 0.10 0.06 0.73 0.30 0.20
0.61 0.18 0.12 0.07 0.82 0.36 0.23
0.74 0.22 0.14 0.08 0.93 0.42 0.29
0.89 0.26 0.17 0.10 1.00 0.45 0.34
1.00 0.31 0.20 0.11
0.48 0.40
0.35 0.23 0.13
0.52 0.42
0.37 0.24 0.14
0.53 0.43
0.40 0.26 0.15
0.55 0.44
0.46 0.30 0.17
0.59 0.47
0.51 0.33 0.19
0.63 0.49
0.52 0.34 0.19
0.64 0.50
0.62 0.40 0.23
0.72 0.54
0.74 0.48 0.28
0.80 0.59
0.87 0.56 0.32
0.89 0.66
1.00 0.65 0.37
0.98 0.72
0.66 0.38
0.99 0.73
0.74 0.42
1.00 0.79
0.84 0.48
0.86
0.94 0.53
0.92
1.00 0.59
0.99
0.78
1.00
1.00
Conc. Thickness
Factor in Shear4
fHV
20
(508)
0.02
0.08
0.11
0.11
0.13
0.16
0.19
0.23
0.26
0.27
0.30
0.34
0.36
0.36
0.38
0.41
0.43
0.46
0.46
0.49
0.52
0.55
0.58
0.69
0.93
4
(102)
n/a
n/a
n/a
0.65
0.69
0.74
0.78
0.83
0.87
0.88
0.91
0.94
0.98
0.99
1.00
9
(229)
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.58
0.60
0.63
0.65
0.66
0.70
0.74
0.78
0.82
0.82
0.85
0.89
0.92
0.95
1.00
12
(305)
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.57
0.60
0.64
0.67
0.71
0.71
0.74
0.77
0.80
0.83
0.91
1.00
20
(508)
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.59
0.61
0.64
0.66
0.69
0.75
0.87

25

Table 27 Load Adjustment Factors for 1-1/4-in. Diameter Fractional Threaded Rods in Uncracked Concrete 1,2
1-1/4 in
Uncracked Concrete
1
2
3
4
Embedment hef
in (mm)
1-3/4
(44)
6-1/4
(159)
7
(178)
8
(203)
9
(229)
10
(254)
11
(279)
12
(305)
13
(330)
14
(356)
14-1/4
(362)
15
(381)
16
(406)
17
(432)
18
(457)
20
(508)
22
(559)
24
(610)
26
(660)
28
(711)
30
(762)
36
(914)
>48
(1219)
Spacing Factor in
Tension
fAN
5 11-1/4 15
(127) (286) (381)
n/a n/a n/a
0.62 0.59 0.57
0.63 0.60 0.58
0.65 0.62 0.59
0.67 0.63 0.60
0.69 0.65 0.61
0.71 0.66 0.62
0.72 0.68 0.63
0.74 0.69 0.64
0.76 0.71 0.66
0.77 0.71 0.66
0.78 0.72 0.67
0.80 0.74 0.68
0.82 0.75 0.69
0.84 0.77 0.70
0.87 0.80 0.72
0.91 0.83 0.74
0.95 0.86 0.77
0.98 0.89 0.79
1.00 0.91 0.81
0.94 0.83
1.00 0.90
1.00
25
(635)
n/a
0.54
0.55
0.55
0.56
0.57
0.57
0.58
0.59
0.59
0.60
0.60
0.61
0.61
0.62
0.63
0.65
0.66
0.67
0.69
0.70
0.74
0.82

in Tension
fRN
5 11-1/4 15
(127) (286) (381)
0.35 0.22 0.16
0.62 0.32 0.23
0.65 0.34 0.25
0.70 0.36 0.27
0.75 0.39 0.29
0.81 0.42 0.31
0.86 0.44 0.33
0.92 0.47 0.35
0.98 0.50 0.37
1.00 0.54 0.40
0.55 0.40
0.58 0.43
0.62 0.45
0.65 0.48
0.69 0.51
0.77 0.57
0.85 0.62
0.92 0.68
1.00 0.74
0.79
0.85
1.00
25
(635)
0.09
0.14
0.15
0.16
0.17
0.18
0.19
0.20
0.22
0.23
0.24
0.25
0.27
0.28
0.30
0.33
0.37
0.40
0.43
0.47
0.50
0.60
0.80
Spacing Factor in
Shear3
fAV
5 11-1/4 15
(127) (286) (381)
n/a n/a n/a
0.59 0.54 0.53
0.60 0.54 0.53
0.61 0.55 0.54
0.62 0.55 0.54
0.64 0.56 0.55
0.65 0.57 0.55
0.66 0.57 0.56
0.68 0.58 0.56
0.69 0.59 0.57
0.69 0.59 0.57
0.70 0.59 0.57
0.72 0.60 0.57
0.73 0.60 0.58
0.75 0.61 0.58
0.77 0.62 0.59
0.80 0.63 0.60
0.83 0.65 0.61
0.86 0.66 0.62
0.88 0.67 0.63
0.91 0.68 0.64
0.99 0.72 0.67
1.00 0.79 0.72
25
(635)
n/a
0.52
0.52
0.53
0.53
0.53
0.54
0.54
0.54
0.55
0.55
0.55
0.55
0.56
0.56
0.57
0.57
0.58
0.59
0.59
0.60
0.62
0.66
Toward Edge
To Edge
fRV
fRV
5 11-1/4 15 25
5 11-1/4 15
(127) (286) (381) (635) (127) (286) (381)
0.05 0.02 0.01 0.01 0.11 0.03 0.02
0.37 0.11 0.07 0.04 0.63 0.22 0.15
0.43 0.13 0.09 0.05 0.69 0.26 0.17
0.53 0.16 0.11 0.06 0.78 0.31 0.21
0.63 0.19 0.13 0.08 0.87 0.38 0.25
0.74 0.22 0.15 0.09 0.97 0.44 0.29
0.86 0.25 0.17 0.10 1.00 0.48 0.34
0.98 0.29 0.19 0.12
0.51 0.39
1.00 0.33 0.22 0.13
0.54 0.44
0.36 0.24 0.15
0.56 0.46
0.37 0.25 0.15
0.57 0.46
0.40 0.27 0.16
0.59 0.48
0.45 0.30 0.18
0.62 0.50
0.49 0.33 0.20
0.65 0.52
0.53 0.36 0.21
0.69 0.54
0.62 0.42 0.25
0.77 0.58
0.72 0.48 0.29
0.85 0.63
0.82 0.55 0.33
0.92 0.68
0.92 0.62 0.37
1.00 0.74
1.00 0.69 0.41
0.79
0.76 0.46
0.85
1.00 0.60
1.00
0.93
Conc. Thickness
Factor in Shear4
fHV
25
(635)
0.01
0.09
0.10
0.13
0.15
0.18
0.20
0.23
0.26
0.29
0.30
0.32
0.36
0.38
0.39
0.41
0.43
0.46
0.48
0.50
0.53
0.60
0.80
5 11-1/4 11-1/4 25
(127) (286) (286) (635)
n/a n/a n/a n/a
n/a n/a n/a n/a
n/a n/a n/a n/a
0.66 n/a n/a n/a
0.70 n/a n/a n/a
0.74 n/a n/a n/a
0.78 n/a n/a n/a
0.81 n/a n/a n/a
0.84 n/a n/a n/a
0.87 0.58 n/a n/a
0.88 0.59 n/a n/a
0.91 0.60 n/a n/a
0.94 0.62 n/a n/a
0.96 0.64 n/a n/a
0.99 0.66 0.58 n/a
1.00 0.70 0.61 n/a
0.73 0.64 n/a
0.76 0.67 n/a
0.79 0.69 n/a
0.82 0.72 0.61
0.85 0.75 0.63
0.94 0.82 0.69
1.00 0.94 0.80

26

with Hilti HIS-N and
HIS-RN Internally
Threaded Insert
Uncracked
Concrete
Dry
Concrete
Water Saturated
Concrete
Permissible
Drilling
Method
Permissible
Concrete
Conditions
Hilti HIS-N and HIS-RN Internally Threaded Insert Installation Conditions

Tipped Drill Bit
Hilti HIS-N and HIS-RN Installation Specifications

Minimum
Internal
Maximum
Insert
Base
Drill
Embedment
Bolt
Nominal
Installation
External
Material
Bit Diameter
Depth
Embedment
Rod
Torque
Diameter
Thickness
Diameter
d
in (mm)
D
in (mm)
3/8
(9.5)
1/2
(12.7)
5/8
(15.9)
3/4
(19.1)
0.65
(16.5)
0.81
(20.5)
1.00
(25.4)
1.09
(27.6)
d0
in
11/16
7/8
1-1/8
1-1/4
hef
in (mm)
4-3/8
(110)
5
(125)
6-3/4
(170)
8-1/8
(205)
hs
in
3/8 15/16
1/2 1-3/16
5/8 1-1/2
3/4 1-7/8
Tmax
ft-lb (Nm)
hmin
in (mm)
15
(20)
30
(41)
60
(81)
100
(136)
5.9
(150)
6.7
(170)
9.1
(230)
10.6
(270)
min
max
Mechanical Properties
Hilti HIS-N and HIS-RN Internally Threaded Insert Material Specifications
Min. futa
fya
ksi
(MPa)
ksi
(MPa)
HIS-N Insert (3/8-in) 11MnPb30+C Carbon Steel conforming to DIN 10277-3
59.5
(410)
71.1
(490)
HIS-N Insert (1/2-in to 3/4-in) 11MnPb30+C Carbon Steel conforming to DIN 10277-3
54.4
(375)
66.7
(460)
HIS-RN Insert X5CrNiMo17122 K700 Stainless Steel conforming to DIN EN 10088-3
50.8
(350)
101.5
(700)
27

Table 28 H
ilti HIT-HY 100 Adhesive Design Strength (Factored Resistance) with Concrete / Bond Failure for Hilti
HIS-N and HIS-RN Internally Threaded Inserts in Uncracked Concrete 1,2,3,4,5,6,7,8
1
2
3
4
5
6
7
8
Tension Nn or Nr
Shear Vn or Vr
Anchor
Diameter
in. (mm)
Effective
Embedment
Depth
in. (mm)
fc = 2500 psi
(17.2 Mpa)
lb (kN)
fc = 3000 psi
(20.7 Mpa)
lb (kN)
fc = 4000 psi
(27.6 Mpa)
lb (kN)
fc = 6000 psi
(41.4 Mpa)
lb (kN)
fc = 2500 psi
(17.2 Mpa)
lb (kN)
fc = 3000 psi
(20.7 Mpa)
lb (kN)
fc = 4000 psi
(27.6 Mpa)
lb (kN)
fc = 6000 psi
(41.4 Mpa)
lb (kN)
3/8
(9.5)
1/2
(12.7)
5/8
(15.9)
3/4
(19.1)
4-3/8
(111)
5
(127)
6-3/4
(171)
8-1/8
(206)
7,140
(31.8)
8,720
(38.8)
13,680
(60.9)
18,065
(80.4)
7,820
(34.8)
9,555
(42.5)
14,985
(66.7)
19,790
(88.0)
8,740
(38.9)
11,030
(49.1)
16,265
(72.3)
20,165
(89.7)
9,265
(41.2)
12,185
(54.2)
17,240
(76.7)
21,375
(95.1)
15,375
(68.4)
18,785
(83.6)
29,460
(131.0)
38,910
(173.1)
16,840
(74.9)
20,575
(91.5)
32,275
(143.6)
42,620
(189.6)
18,825
(83.7)
23,760
(105.7)
35,030
(155.8)
43,430
(193.2)
19,955
(88.8)
26,245
(116.7)
37,135
(165.2)
46,035
(204.8)

Apply spacing, edge distance, and concrete thickness factors in table 30 as necessary. Compare to the steel values in table 29.
periods of time.
Tabular values are for dry concrete conditions. For water saturated concrete multiply design strength (factored resistance) by 0.85.
Table 29 Steel Design Strength (Factored Resistance) for Steel Bolt / Cap Screw for Hilti HIS-N and HIS-RN Internally
Threaded Inserts 5,6
Internal
Thread
CSA A23.3 Annex D Based Design

ASTM A 193 Grade B8M
ASTM A 193 B7
in. (mm)
Tensile1
Nsa
lb (kN)
Shear2
Vsa
lb (kN)
Stainless Steel
Tensile1
Shear2
Nsa
Vsa
lb (kN)
lb (kN)
Tensile3
Nsr
lb (kN)
Shear4
Vsr
lb (kN)
Stainless Steel
Tensile3
Shear4
Nsr
Vsr
lb (kN)
lb (kN)
3/8
(9.5)
1/2
(12.7)
5/8
(15.9)
3/4
(19.1)
6,300
(28.0)
11,530
(51.3)
18,365
(81.7)
27,180
(120.9)
3,490
(15.5)
6,385
(28.4)
10,170
(45.2)
15,055
(67.0)
5,540
(24.6)
10,145
(45.1)
16,160
(71.9)
23,915
(106.4)
5,765
(25.6)
10,555
(47.0)
16,810
(74.8)
24,880
(110.7)
3,215
(14.3)
5,880
(26.2)
9,365
(41.7)
13,860
(61.7)
5,070
(22.6)
9,290
(41.3)
14,790
(65.8)
21,895
(97.4)
Diameter
1
2
3
2
5
6
ACI 318 Appendix D Based Design

ASTM A 193 Grade B8M
ASTM A 193 B7
3,070
(13.7)
5,620
(25.0)
8,950
(39.8)
13,245
(58.9)
2,825
(12.6)
5,175
(23.0)
8,240
(36.7)
12,195
(54.2)
Tensile = Ase,N futa as noted in ACI 318 Appendix D.

Tensile = Ase s fut R as noted in CSA A23.3 Annex D
Shear = Ase s 0.60 fut R as noted in CSA A23.3 Annex D
Steel bolt / cap screw for Hilti HIS-N and HIS-RN inserts are considered brittle steel elements.
28

Table 30 Load Adjustment Factors for Hilti HIS-N and HIS-RN Internally Threaded Inserts in Uncracked Concrete 1
HIS-N and HIS-RN
All Diameters
Uncracked
Concrete
Internal Diameter
in (mm)
Embedment hef
in (mm)
3-1/4
4
5
5-1/2
(83)
Spacing Factor in
Tension
fAN
3/8
1/2
5/8
3/4

in Tension
fRN
3/8
1/2
5/8
3/4
Spacing Factor in
Shear2
fAV
3/8
1/2
5/8
3/4
Toward Edge
fRV
3/8
1/2
5/8
Conc. Thickness
Factor in Shear3
fHV
To Edge
fRV
3/4
3/8
1/2
5/8
3/4
3/8
1/2
5/8
3/4
(9.5) (12.7) (15.9) (19.1) (9.5) (12.7) (15.9) (19.1) (9.5) (12.7) (15.9) (19.1) (9.5) (12.7) (15.9) (19.1) (9.5) (12.7) (15.9) (19.1) (9.5) (12.7) (15.9) (19.1)
4-3/8
6-3/4 8-1/8 4-3/8
6-3/4 8-1/8 4-3/8
6-3/4 8-1/8 4-3/8
6-3/4 8-1/8 4-3/8
6-3/4 8-1/8 4-3/8
6-3/4 8-1/8
(111) (127) (171) (206) (111) (127) (171) (206) (111) (127) (171) (206) (111) (127) (171) (206) (111) (127) (171) (206) (111) (127) (171) (206)
0.60 n/a
n/a
n/a
0.38 n/a
n/a
n/a
0.55 n/a
n/a
n/a
0.15 n/a
n/a
n/a
0.31 n/a
n/a
n/a
n/a
n/a
n/a
n/a
(102) 0.63 0.60
n/a
n/a
0.43 0.41
n/a
n/a
0.56 0.55
n/a
n/a
0.21 0.19
n/a
n/a
0.42 0.38
n/a
n/a
n/a
n/a
n/a
n/a
(127) 0.66 0.63 0.62
n/a
0.49 0.47 0.42
n/a
0.57 0.57 0.55
n/a
0.29 0.26 0.17
n/a
0.49 0.47 0.33
n/a
n/a
n/a
n/a
n/a
(140) 0.67 0.64 0.63 0.61 0.53 0.50 0.44 0.39 0.58 0.58 0.56 0.55 0.34 0.30 0.19 0.15 0.53 0.50 0.39 0.29
n/a
n/a
n/a
n/a
(152) 0.69 0.66 0.64 0.62 0.56 0.53 0.46 0.41 0.59 0.58 0.56 0.55 0.39 0.35 0.22 0.17 0.56 0.53 0.44 0.33 0.60 n/a
n/a
n/a
(178) 0.72 0.68 0.66 0.64 0.64 0.59 0.51 0.45 0.60 0.60 0.57 0.56 0.49 0.43 0.28 0.21 0.64 0.59 0.51 0.42 0.64 0.62
n/a
n/a
(203) 0.75 0.71 0.68 0.66 0.74 0.66 0.56 0.49 0.62 0.61 0.58 0.57 0.60 0.53 0.34 0.26 0.74 0.66 0.56 0.50 0.69 0.66
n/a
n/a
(229) 0.78 0.74 0.71 0.68 0.83 0.75 0.61 0.53 0.63 0.62 0.59 0.58 0.71 0.63 0.40 0.31 0.83 0.75 0.61 0.54 0.73 0.70
n/a
n/a
10
(254) 0.81 0.76 0.73 0.71 0.92 0.83 0.66 0.57 0.65 0.64 0.60 0.58 0.83 0.74 0.47 0.36 0.92 0.83 0.66 0.58 0.77 0.74 0.64
n/a
11
(279) 0.84 0.79 0.75 0.73 1.00 0.91 0.72 0.61 0.66 0.65 0.61 0.59 0.96 0.86 0.55 0.41 1.00 0.91 0.72 0.62 0.81 0.78 0.67 0.61
12
(305) 0.88 0.81 0.78 0.75
0.99 0.79 0.66 0.68 0.66 0.62 0.60 1.00 0.98 0.62 0.47
0.99 0.79 0.66 0.84 0.81 0.70 0.64
14
(356) 0.94 0.87 0.82 0.79
1.00 0.92 0.77 0.71 0.69 0.64 0.62
1.00 0.78 0.59
1.00 0.92 0.77 0.91 0.87 0.75 0.69
16
(406) 1.00 0.92 0.87 0.83
1.00 0.88 0.74 0.72 0.66 0.63
0.96 0.73
1.00 0.88 0.97 0.94 0.80 0.73
18
(457)
0.97 0.91 0.87
0.99 0.77 0.75 0.68 0.65
1.00 0.87
0.99 1.00 0.99 0.85 0.78
24
(610)
1.00 1.00 0.99
1.00 0.85 0.83 0.74 0.70
1.00
30
(762)
1.00
0.94 0.91 0.80 0.75
36
(914)
1.00 0.99 0.86 0.80
>48
(1219)
1.00 0.99 0.90
1.00
1.00 0.99 0.90

1.00 1.00
1 Linear interpolation not permitted

2 Spacing factor reduction in shear, fAV, assumes an influence of a nearby edge. If no edge exists, then fAV = fAN.
3 Concrete thickness reduction factor in shear, fHV, assumes an influence of a nearby edge. If no edge exists, then fHV = 1.0.
29

2.4.11 Installation Instructions
Installation Instructions For Use (IFU) are included with each

product package. They can also be viewed or downloaded
on-line at www.us.hilti.com (US) and www.hilti.ca (Canada)
Service/Technical Info >> Technical Downloads >>
Anchoring Systems. Because of the possibility of changes,
always verify that downloaded IFU are current when used.
Proper installation is critical to achieve full performance.
Training is available on request. Contact Hilti Technical
Services for applications and conditions not addressed in the
IFU.
2.4.12 Working Time and

Cure Time
Chemical
conc.
10%
Acetic acid
Acetone
Ammonia
Carbolic acid solution
Carbon tetrachloride
Chlorinated lime solution
Citric acid
Diesel oil
Ethanol
Formic acid
HIT-HY 100
Gasoline / Petrol
Glycol
HIT-V, HAS
HIS-N
Rebar
Hydrochloric acid
[C]
[F]
-10...-5
14...22
3 h
12 h
-4...0
23...31
40 min
4 h
1...5
32...40
20 min
2 h
6...10
41...50
8 min
60 min
11...20
51...68
5 min
30 min
21...30
69...86
3 min
30 min
31...40
87...104
2 min
30 min
twork
2.4.13 Resistance of Cured

HIT-HY 100 to Chemicals
tcure
Hydrogen peroxide
Lactic acid
Machine oil
Nitric acid
Phosphoric acid
Salt (common) solution
Sea water
Soda solution
Sodium Hydroxide
(Caustic soda)
Sodium hypochlorite
Sulphuric acid
Toluene
Key: non-resistant
+ resistant
conc.
5%
10%
10%
10%
conc.
10%
conc.
10%
10%
conc.
10%
conc.
10%
conc.
10%
10%
10%
40%
20%
5%
2%
conc.
30%
10%
limited resistance
Behavior
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
Samples of the HIT-HY 100 resin were immersed in the various

chemical compounds for up to one year. At the time of the
test period, the samples were analyzed. Any samples showing
no visible damage and having less than a 25% reduction in
bending (flexural) strength were classified as Resistant.
Samples that had slight damage, such as small cracks, chips,
etc. or reduction in bending strength of 25% or more, were
classified as Partially Resistant. Samples that were heavily
damaged or destroyed were classified as Not Resistant.
Note: In actual use, the majority of the resin is encased in the
base material, leaving very little surface area exposed.
30
Notes
31
Hilti. Outperform. Outlast.

P.O. Box 21148, Tulsa, OK 74121 Hilti, Inc. (U.S.) 1-800-879-8000 www.us.hilti.com en espaol 1-800-879-5000 Hilti
(Canada) Corp. 1-800-363-4458 www.hilti.ca Hilti is an equal opportunity employer Hilti is a registered trademark of Hilti, Corp.
Copyright 2014 by Hilti, Inc. (U.S.) 01/14 DBS
The data contained in this literature was current as of the date of publication. Updates and changes may be made
based on later testing. If verification is needed that the data is still current, please contact the Hilti Technical
Support Specialists at 1-800-363-4458. All published load values contained in this literature represent the results
of testing by Hilti or test organizations. Local base materials were used. Because of variations in materials, on-site
testing is necessary to determine performance at any specific site. Laser beams represented by red lines in this
publication. Printed in the United States
*14001 US only

CSA Spec HILTI HIT 100 Technical Supplement

Uploaded by

Copyright:

Available Formats

CSA Spec HILTI HIT 100 Technical Supplement

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

CSA Spec HILTI HIT 100 Technical Supplement

Uploaded by

Copyright:

Available Formats

HIT-HY 100

Setting the standard for

Setting the standard

Hilti Adhesive Anchors every job, every application.

HIT-HY 100 Adhesive Anchoring System

HIT-HY 100 Adhesive Anchoring System

Features and Applications

Anchoring light structural steel connections

Anchoring secondary steel elements

Rebar doweling and connecting secondary

Working/Full Cure Time Table (Approximate)

Base Material Temperature

Qty of foil packs

HIT-HY 100 (11.1oz/330ml)

HIT-HY 100 Master Carton (11.1oz/330ml)

HIT-HY 100 Master Carton (11.1oz/330ml) + HDM 500

HIT-HY 100 Master Carton (16.9oz/500ml)

(2) HIT-HY 100 Master Cartons (16.9oz/500ml) + HDM 500

(2) HIT-HY 100 Master Cartons (16.9oz/500ml) + HDE 500 Kit

HDM 500 Manual Dispenser

HDE 500 Compact Cordless Dispenser

HDE 500 Industrial Cordless Dispenser

HIT-HY 100 Adhesive Anchoring System

HIT-HY 100 Adhesive Anchoring System

The Hilti HIT-HY100 Adhesive Anchoring

Hilti HIT-HY100 Adhesive is an

Elements that are suitable for use with

The Leadership in Energy and

Hilti HIT-HY100 Adhesive Technical Data Table of Contents

Hilti HIS-N and HIS-RN Internally

Information on Working Time and Cure Time on page 30

HIT-HY 100 Adhesive Anchoring System

HIT-HY 100 Adhesive Anchoring System

HiltiHIT-HY100 has been tested in accordance with ICC

2.3 Design of HiltiHIT-HY100

Technical data for the system components of HiltiHIT-HY100

Hilti has had HiltiHIT-HY100 evaluated according to AC308

2.2 Adhesive Anchor Design

HiltiHIS-(R)N internally threaded inserts.

For post-installed and cast-in anchor systems, design

CSA A23.3-04 Annex D provides the required limit states

Standard threaded rods and rebar.

2.3.2 Using the New Hilti

In lieu of providing a copy of ESR-3574 design tables in this

2.4 Hilti Simplified Design Tables

HIT-HY 100 Adhesive Anchoring System

HIT-HY 100 Adhesive Anchoring System

n min | Vn fAV fRV fHV ; Vsa |

n min | Vr fAV fRV fHV ; Vsr |

The shear value is based on the pryout strength.

2.4.2 Steel Strength for All

The steel strength is provided on a separate table and is based

2.4.3 How to Calculate Anchor

The process for calculating the capacity of a single anchor

The design strength (factored resistance) of an anchor is

HIT-HY 100 Adhesive Anchoring System

HIT-HY 100 Adhesive Anchoring System

The values of Ndes and Vdes developed from Section 2.4.3

Note: designs are for orthogonal anchor bolt patterns and no

Nua = Required strength in tension based on

HIT-HY 100

2.3 Design of HiltiHIT-HY100

2.2 Adhesive Anchor Design

2.3.2 Using the New Hilti

2.4.2 Steel Strength for All

2.4.3 How to Calculate Anchor

Nua = Required strength in tension based on

2.4.5 Sustained Loads and

2.4.6 Accuracy of the Simplified

The load adjustment factors are determined by

2.4.7 Limitations Using