Panel Boe Hv320wxc-100 0 (DS)

Global LCD Panel Exchange Center www.panelook.
com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
!
B2005-C001-O(1/3) A4(210 X 297)
PRODUCT GROUP
TFT-LCD
REV.
P3
ISSUE DATE
2010.04.27
PAGE
TITLE : HV320WXC-100
Preliminary Product Specification
Rev. P3
A4(210 X 297)
SPEC. NUMBER
OF 27
PROPRIETARY NOTE
THIS SPECIFICATION IS THE PROPERTY OF BOE TFT-LCD SBU AND SHALL NOT
BE REPRODUCED OR COPIED WITHOUT THE WRITTEN PERMISSION OF BOE TFT-
LCD SBU AND MUST BE RETURNED TO BOE TFT-LCD SBU UPON ITS REQUEST
BOE OT TFT-LCD
BEIJING BOE OPTOELECTRONICS TECHNOLOGY
Global LCD Panel Exchange Center www.panelook.com
B2005-C001-O(2/3) A4(210 X 297)
SPEC. NUMBER SPEC. TITLE
HV320WXC-100 Preliminary Product Specification
PAGE
OF 27
| | 10.04.27 Revised Spec. P3
) T 09.12.20 Revised Spec. P2
) T 09.05.20 Revised Spec. P1
J.M.Kim 09.01.07 Initial Release P0
PREPARED DATE DESCRIPTION OF CHANGES ECN NO. REV.
REVISION HISTORY
PRODUCT GROUP
REV ISSUE DATE
2
P3 2010.04.27
TFT- LCD PRODUCT
B2005-C001-O(3/3) A4(210 X 297)
SPEC. NUMBER
SPEC. TITLE
PAGE
REV ISSUE DATE
PRODUCT GROUP
P3 TFT- LCD PRODUCT
3 OF 27
2010.04.27
Contents
1.2 Features
1.3 Applications
1.1 Introduction
1.4 General Specification
5.4 Power Sequence
23 HANDING & CAUTIONS 11
16 OPTICAL SPECIFICATIONS 6
18 MECHANICAL CHARACTERISTICS 7
5.1 Timing Parameter
5.2 Signal Timing Waveform
5.3 Input Signals, Basic Display Colors & Cray Scale Of Colors
4.3 Inverter Input Signal & Power
4.2 LVDS Interface
3.2 Inverter
24 APPENDIX 12
21 PACKING 10
2 REVISIONS HISTORY
3 CONTENTS
4 GENERAL DESCRIPTION 1
6 ABSOLUTE MAXIMUM RATINGS 2
ELECTRICAL SPECIFICATIONS 3
3.1 TFT LCD Module
9 INTERFACE CONNECTION 4
4.1 Module Input Signal & power
12 SIGNAL TIMING SPECIFICATIONS 5
19 RELIABLITY 8
20 PRODUCT SERIAL NUMBER 9
Page ITEM No
B2005-C001-O(3/3) A4(210 X 297)
SPEC. NUMBER
SPEC. TITLE
PAGE
REV ISSUE DATE
PRODUCT GROUP
P3 TFT- LCD PRODUCT
4 OF 27
2010.04.27
1.0 GENERAL DESCRIPTION
1.1 Introduction
HV320WXC-100 is a color active matrix TFT LCD module using amorphous silicon TFT's
(Thin Film Transistors) as an active switching devices. This module has a 31.51 inch diagonally
measured active area with WXGA resolutions (1366 horizontal by 768 vertical pixel array).
Each pixel is divided into RED, GREEN, BLUE dots which are arranged in vertical stripe and
this module can display 16.7M colors. The TFT-LCD panel used for this module is adapted for a
low reflection and higher color type.
1.2 Features
z LVDS Interface with 1 pixel / clock
z High-speed response
z Lower Color shift Image Quality
z 8-bit color depth, display 16.7M colors
z High luminance and contrast ratio, low reflection and wide viewing angle
z DE (Data Enable) only mode
z AFFS technology is applied for high display quality
z RoHS Compliant
CN1
(30pin)
LVDS
5pair
Option
Source Driver Circuit
TFT - LCD Panel
(1366 RGB 768 pixels)
G1
S1 S1366
G768
RGB(Mini-LVDS)
Timing Controller
[LVDS Rx & Mini-LVDS
Tx integrated]
G
a
t
e

D
r
i
v
e
r

C
i
r
c
u
i
t
Power Circuit
Block
# 9
+12.0V
Back light Assembly
(4 U_CCFL)
2pin x 1CNs (High)
+24.0V
+24.0V
Inverter
(CN2,CN3)
2pin x 1CNs (High)
B2005-C001-O(3/3) A4(210 X 297)
SPEC. NUMBER
SPEC. TITLE
PAGE
REV ISSUE DATE
PRODUCT GROUP
P3 TFT- LCD PRODUCT
5 OF 27
2010.04.27
1.4 General Specification
Watt Total 80Watt (Typ.) (Logic= 4W, Lamp=
76W [I
BL
=12mA] )
Power Consumption
Haze 10%, 3H, Semi-glare treatment
(Front Polarizer)
Surface Treatment
gram 5300 (typ.) Weight
mm 760.0(H) 450.0(V) 48.0(D) typ. Outline Dimension
Transmission mode, Normally Black Display mode
colors 16.7M(8bits-true) Display colors
Pixels RGB stripe arrangement Pixel arrangement
170.25(H) 510.75(V)RGB Pixel pitch
pixels 1366(H) 768(V) Number of pixels
mm 697.685(H) 392.256(V) Active area
Remarks Unit Specification Parameter
1.3 Application
z Home Alone Multimedia TFT-LCD TV
z Display Terminals for Control System
z High Definition TV(HD TV)
z AV application Products
< Table 1. General Specifications >
B2005-C001-O(3/3) A4(210 X 297)
SPEC. NUMBER
SPEC. TITLE
PAGE
REV ISSUE DATE
PRODUCT GROUP
P3 TFT- LCD PRODUCT
6 OF 27
2010.04.27
2.0 ABSOLUTE MAXIMUM RATINGS
The followings are maximum values which, if exceed, may cause faulty operation or
damage to the unit. The operational and non-operational maximum voltage and current
values are listed in Table 2.
%RH 90 10 Hst Storage Humidity
%RH 90 10 Hop Operating Ambient Humidity
1)
+40 0 T
OP
Inverter
LCD Module
KHz 80 30 F
L
Back-light Lamp Frequency
+50 -20 T
ST
Storage Temperature
+50 0 T
SUR
Operating Temperature
V 26.4 21.6 V
IN
Ta = 25
V 13.2 10.8 V
DD
Power Supply
Voltage
Remarks Unit Max. Min. Symbol Parameter
Note : 1) Temperature and relative humidity range are shown in the figure below.
Wet bulb temperature should be 39 max. and no condensation of water.
< Table 2. LCD Module Electrical Specifications >
[VSS=GND=0V]
OO
1O ?O 3O 4O 5O GO 7O 8O O ?O
O
1O
?O
3O
4O
5O
Oiy Bu+o Temoeialuie `C|
Wel Bu+o
Temoeialuie C|
Slciaqe
Ooeial+cn
M
u
m
+
o
+
l
y

)
R
M
|
1O
4O
GO
GO
B2005-C001-O(3/3) A4(210 X 297)
SPEC. NUMBER
SPEC. TITLE
PAGE
REV ISSUE DATE
PRODUCT GROUP
P3 TFT- LCD PRODUCT
7 OF 27
2010.04.27
3.0 ELECTRICAL SPECIFICATIONS
3.1 TFT LCD Module
Notes : 1. The supply voltage is measured and specified at the interface connector of LCM.
The current draw and power consumption specified is for VDD=12.0V, Frame rate=60Hz and
Clock frequency = 80MHz. Test Pattern of power supply current
a) Typ : Black Pattern
b) Max : Sub Dot Pattern
2. The duration of rush current is about 2ms and rising time of Power Input is 1ms(min)
[Ta =252 ]
MHz 85 80.4 - PLCD Main Clock Frequency
Hz 63 60 47 f
V
Vsync Frequency
KHz 53 47.4 39.4 f
H
Hsync Frequency
mA 450 400 350
Watt 6 4 3 PLCD Power Consumption
2 A 2.0 - - IRUSH Rush current
Vdc 13.2 12 10.8 VDD Power Supply Input Voltage
IDD Power Supply Current
Parameter Symbol
Max Typ Min
Notes Unit
Values
< Table 3. LCD Module Electrical Specifications >
Mosaic Pattern(8 x 6)
White : 255Gray
Black : 0Gray
B2005-C001-O(3/3) A4(210 X 297)
SPEC. NUMBER
SPEC. TITLE
PAGE
REV ISSUE DATE
PRODUCT GROUP
P3 TFT- LCD PRODUCT
8 OF 27
2010.04.27
3.2 Inverter
Notes: 1.The specified current and power consumption are under the typical supply Input voltage,
24V. It is total power consumption.
2. High-duty = On/(On+Off) * 100
3. The life time of a Lamp, 50,000Hrs, is determined as the time at which luminance of the
lamp is 50% compared to that of initial value at the typical lamp current on condition of
continuous operating at 25 r 2`C.
3.3 Max. Luminance
V
0 Min. Luminance
A
DIM
Analog Dimming
3 Hrs - - 50,000 Life Time
2
1
Notes
Max. Typ. Min.
V 25.2 24.0 22.8 V
IN
Input Voltage
V TBD 0 TBD Lamp OFF =Low
% TBD - TBD PWM
DIM
PWM Dimming
V TBD 3.3 TBD Lamp ON = High
V
ON/OFF
B/L on/off control
Watt 80 76 - Typ Luminance P
B
Power Consumption
A 3.4 3 - Vadim=3.3V I
DDB
Input Current
Unit
Values
Condition Symbol Parameter
Cn
Cll
< Table 4. Inverter Electrical Specifications >
B2005-C001-O(3/3) A4(210 X 297)
SPEC. NUMBER
SPEC. TITLE
PAGE
REV ISSUE DATE
PRODUCT GROUP
P3 TFT- LCD PRODUCT
9 OF 27
2010.04.27
4.0 INTERFACE CONNECTION
4.1 Module Input Signal & Power
< Table 5. LCM Module Input Connector Pin Configuration >
Notes : 1. NC(Not Connected) : This pins are only used for BOE internal operations.
2. Input Level of LVDS signal is based on the IEA 664 Standard.
3. LVDS_SEL : This pin is used for selecting LVDS signal data format.
If this Pin : Low (GND) or Open (NC) Normal NS LVDS format
Otherwise : High (3.3V) JEIDA LVDS format
Sequence : On = Vdd LVDS Option Interface signal
Off = Interface signal LVDS Option Vdd
Ground
Ground
No Connection
No Connection
Ground
LVDS Receiver Signal(+)
LVDS Receiver Signal(-)
Ground
LVDS Receiver Clock Signal(+)
LVDS Receiver Clock Signal(-)
Ground
LVDS Receiver Signal(-)
Ground
Description
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
Pin No
GND Power Supply +12.0V VDD 2
RX2- Power Supply +12.0V VDD 3
RX2+ Power Supply +12.0V VDD 4
GND Ground GND 5
RCLK- Ground GND 6
RCLK+ Ground GND 7
GND Ground GND 8
RX3- H=JEIDA , Lor NC= VESA LVDS_SEL 9
RX3+ No Connection NC 10
GND Ground GND 11
NC LVDS Receiver Signal(-) RX0- 12
NC LVDS Receiver Signal(+) RX0+ 13
GND Ground GND 14
GND LVDS Receiver Signal(-) RX1- 15
Symbol Description Symbol Pin No
VDD RX1+ Power Supply +12.0V 1
30 1
Rear view of LCM
FI-E30S (JAE)
- Connector : IS100-L30B-C23(Manufactured by UJU) or Equivalent.
B2005-C001-O(3/3) A4(210 X 297)
SPEC. NUMBER
SPEC. TITLE
PAGE
REV ISSUE DATE
PRODUCT GROUP
P3 TFT- LCD PRODUCT
10 OF 27
2010.04.27
B0 [LSB] Blue6 TxIN/RxOUT16
B1 Blue7 [MSB] TxIN/RxOUT17
VSYNC VSYNC TxIN/RxOUT25
HSYNC HSYNC TxIN/RxOUT24
B7 [MSB] Blue5 TxIN/RxOUT22
B6 Blue4 TxIN/RxOUT21
G4 Green2 TxIN/RxOUT9
G7 [MSB] Green5 TxIN/RxOUT14
B2 Blue0 [LSB] TxIN/RxOUT15
TxOUT/RxIN2
DEN DEN TxIN/RxOUT26
R0 [LSB] Red6 TxIN/RxOUT27
TxOUT/RxIN3
R1 Red7 [MSB] TxIN/RxOUT5
G0 [LSB] Green6 TxIN/RxOUT10
G1 Green7 [MSB] TxIN/RxOUT11
Reserved Reserved TxIN/RxOUT23
TxOUT/RxIN1
G2 Green0 [LSB] TxIN/RxOUT7
R7 [MSB] Red5 TxIN/RxOUT6
R6 Red4 TxIN/RxOUT4
R5 Red3 TxIN/RxOUT3
R4 Red2 TxIN/RxOUT2
R3 Red1 TxIN/RxOUT1
R2 Red0 [LSB] TxIN/RxOUT0
TxOUT/RxIN0
Remark JEIDA Data format LVDS Data format LVDS Pin
< Table 6. LCM Module Input Connector Pin Configuration >
4.2 LVDS Interface
- LVDS Receiver : Timing Controller (LVDS Rx merged)
- LVDS Data : Pixel Data
B2005-C001-O(3/3) A4(210 X 297)
SPEC. NUMBER
SPEC. TITLE
PAGE
REV ISSUE DATE
PRODUCT GROUP
P3 TFT- LCD PRODUCT
11 OF 27
2010.04.27
4.3 Inverter Input Signal & Power
- Connector : 20022WR_14AML(Yeonho) or equivalent
(On :2.4V~3.6V/Off :0.0~0.8V)
(Max :3.3V / Min : 0.0V) External PWM control signal E_PWM 14
Internal PWM control signal I_PWM 13
Normal (GND) / Abnormal (Open Collector) ERR 11
Ground GND 10
Ground GND 9
Ground GND 8
Ground GND 7
Ground GND 6
Power Supply +24V VBL 5
Backlight ON/OFF control VON/OFF 12
Remarks Description Symbol Pin No
Rear view of LCM
S14B-PH-SM3-TB
(JST : Japan Solderless Terminal Co.,Ltd.)
< Table 6. Inverter Input Connector Pin Configuration >
Backlight Ground GND 4
Backlight On/off Signal ON/OFF 3
Brightness Adjustable Voltage Analog dimmer 2
Brightness Adjustable Voltage PWM dimmer 1
Remarks Description Symbol Pin No
- Connector : B4B-ZR-SM3A-TF (Manufactured by JST) or Equivalent
< Table 7. Inverter Control Signal Connector Pin Configuration >
B4B-ZR-SM3A-TF
(JST : Japan Solderless Terminal Co.,Ltd.)
PCB
14
1
PCB
B2005-C001-O(3/3) A4(210 X 297)
SPEC. NUMBER
SPEC. TITLE
PAGE
REV ISSUE DATE
PRODUCT GROUP
P3 TFT- LCD PRODUCT
12 OF 27
2010.04.27
5.0 SIGNAL TIMING SPECIFICATION
5.1 Timing Parameters ( DE only mode)
< Table 8. Timing Table >
Notes: This product is DE only mode. The input of Hsync & Vsync signal does not have an effect on normal operation.
t
CLK
2000 1560 1440 t
HP
Total
t
CLK
- 1366 - t
HV
Valid
Horizontal Active
Display Term
t
HP
1200 838 773 t
VP
Total
Vertical Active
Display Term
KHz
t
HP
Hz 63 60 47 f
V
Frequency
53 47.4 39.4 f
H
Frequency
t
CLK
1776 1560 1416 t
HP
Period
Hsync
t
HP
1063 790 775 t
VP
Period
Vsync
- 768 - t
VV
Valid
MHz 85 80.4 75.3 - Frequency
ns 15.9 12.4 11.8 t
CLK
Period
CLK
Note Unit Max Typ Min Symbol ITEM
B2005-C001-O(3/3) A4(210 X 297)
SPEC. NUMBER
SPEC. TITLE
PAGE
REV ISSUE DATE
PRODUCT GROUP
P3 TFT- LCD PRODUCT
13 OF 27
2010.04.27
tCLK
Invalid data
Valid data
Invalid data
Invalid data
Invalid data
Pixel data Pixel data
Pixel data Pixel data
DE(Data Enable)
Valid data
0.5 VDD
tHP
tHV
tVP
tVV
HSync
VSync
DE(Data Enable)
DE(Data Enable)
DCLK
First data
Second data
5.2 Signal Timing Waveform
B2005-C001-O(3/3) A4(210 X 297)
SPEC. NUMBER
SPEC. TITLE
PAGE
REV ISSUE DATE
PRODUCT GROUP
P3 TFT- LCD PRODUCT
14 OF 27
2010.04.27
5.3 Input Signals, Basic Display Colors & Gray Scale Of Colors
0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 Green
0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 `
0 0 0 0 0 0 0 0 1 0 1 1 1 1 1 1 0 0 0 0 0 0 0 0 Brighter
. . . `
1 1 1
0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Darker
0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Black
Gray Scale
of Green
1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Blue
0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 `
1 0 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Brighter
. . . `
1 1 1
0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Darker
1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Black
Gray Scale
of Blue
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 White
0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Yellow
1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 Magenta
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 Red
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 Cyan
0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 Green
1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Blue
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Black
Basic Colors
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 Red
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 `
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 1 1 1 1 1 Brighter
. . . `
1 1 1
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 Darker
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Black
Gray Scale
of Red
1 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0
0 1 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 1 0 0 0 0 0 0 Darker
1 1 1
. . . `
1 0 1 1 1 1 1 1 1 0 1 1 1 1 1 1 1 0 1 1 1 1 1 1 Brighter
0 1 1 1 1 1 1 0 1 1 1 1 1 1 1 0 1 1 1 1 1 1 1 `
1 1 1
1
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 White
0
B6
0
B5
0
B4
0
B3
0
B2
0
B1
0
B0
0
G5
0
G4
0
G3
0
G2
0
G1
0
G0
0
G6
0
R3
0
R4
0
R5
0
R6
0
R0
0
R2
0
R1 B7 G7 R7
0 0 0 Black
Gray Scale
of White
Blue Data Green Data Red Data
Color & Gray Scale
Input Data Signal
B2005-C001-O(3/3) A4(210 X 297)
SPEC. NUMBER
SPEC. TITLE
PAGE
REV ISSUE DATE
PRODUCT GROUP
P3 TFT- LCD PRODUCT
15 OF 27
2010.04.27
To prevent a latch-up or DC operation of the LCD module, the power on/off sequence
shall be as shown in below
Notes:
1. When the power supply VDD is 0V, Keep the level of input signals on
the low or keep high impedance.
2. Do not keep the interface signal high impedance when power is on.
3. Back Light must be turn on after power for logic and interface signal are valid.
T
!ovcr :uppl_
lncrIaoc :_nal
( lnpu laa )
lnvcrcr :_nal
( L/L On/OII )
Vald
z
5
1
0.Vll
0.TVll
0.Vll
0.TVll
0V
0V
0V
o
s - - 3.0 T6
ms 50 - 0.5 T2
ms
ms - - 1 T3
- - 100 T4
ms 50 - 0.5 T5
ms 10 - 0.5 T1
Max Typ Min
Units
Values
Parameter
5.4 Power Sequence
B2005-C001-O(3/3) A4(210 X 297)
SPEC. NUMBER
SPEC. TITLE
PAGE
REV ISSUE DATE
PRODUCT GROUP
P3 TFT- LCD PRODUCT
16 OF 27
2010.04.27
6.0 OPTICAL SPECIFICATION
The test of Optical specifications shall be measured in a dark room (ambient luminance d 1 lux and
temperature = 25r2') with the equipment of Luminance meter system (Goniometer system and
TOPCON BM-5) and test unit shall be located at an approximate distance 50cm from the LCD
surface at a viewing angle of and ' equal to 0q. We refer to
=0
(=
3
) as the 3 oclock direction
(the right),
=90
(=
12
) as the 12 oclock direction (upward),
=180
(=
9
) as the 9 oclock
direction (left) and
=270
(=
6
) as the 6 oclock direction (bottom). While scanning and/or
, the center of the measuring spot on the Display surface shall stay fixed. The measurement shall
be executed after 30 minutes warm-up period. VDD shall be 5.0V +/-10% at 25qC. Optimum
viewing angle direction is 6 clock.
4
% 72 - Color Gamut
TBD K 10,000 - Color Temperature
(7)
(10) 8 - T
g
G to G
2.4 2.2 2.0 Gamma Scale
- T
d
Decay Note 6 ms
(7) 4 - T
r
Rise
Response
Time
0.061 B
y
0.146 B
x
Blue
0.603 G
y
0.291 G
x
Green
0.335 R
y
0.636 R
x
Red
0.292 W
y
Note 5
TYP.
+ 0.03
0.279
TYP.
- 0.03
W
x
White
Reproduction
of color
Note 4 % - 75 Y White luminance uniformity
Note 3 cd/m
2
- 450 380 Y
w
Luminance of White
Note 2 - 1200:1 900:1
= 0q
(Center)
Normal
Viewing
Angle
CR Contrast ratio
Deg. 89
6
Deg. 89
12
Vertical
Deg. 89
9
Note 1
Deg. 89
CR > 10
3
Horizontal
Viewing
Angle
Remark Unit Max Typ Min Condition Symbol Parameter
[VDD = 5.0V, Frame rate = 60Hz, Ta =25:2 ']
B2005-C001-O(3/3) A4(210 X 297)
SPEC. NUMBER
SPEC. TITLE
PAGE
REV ISSUE DATE
PRODUCT GROUP
P3 TFT- LCD PRODUCT
17 OF 27
2010.04.27
1. Viewing angle is the angle at which the contrast ratio is greater than 10. The viewing are
determined for the horizontal or 3, 9 oclock direction and the vertical or 6, 12 oclock
direction with respect to the optical axis which is normal to the LCD surface.
2. Contrast measurements shall be made at viewing angle of T= 0q and at the center of the LCD
surface. Luminance shall be measured with all pixels in the view field set first to white, then
to the dark (black) state. (See FIGURE 1 shown in Appendix) Luminance Contrast Ratio
(CR) is defined mathematically.
Luminance when displaying a white raster
Luminance when displaying a black raster
3. Center Luminance of white is defined as the LCD surface. Luminance shall be measured with
all pixels in the view field set first to white. This measurement shall be taken at the locations
shown in FIGURE 2 for a total of the measurements per display.
4. The White luminance uniformity on LCD surface is then expressed as :
Y = ( Minimum Luminance of 9points / Maximum Luminance of 9points ) * 100
(See FIGURE 2 shown in Appendix).
5. The color chromaticity coordinates specified in Table 4. shall be calculated from the spectral
data measured with all pixels first in red, green, blue and white. Measurements shall be made
at the center of the panel.
6. The electro-optical response time measurements shall be made as FIGURE 3 shown in
Appendix by switching the data input signal ON and OFF. The times needed for the
luminance to change from 10% to 90% is Td, and 90% to 10% is Tr.
Note :
CR =
B2005-C001-O(3/3) A4(210 X 297)
SPEC. NUMBER
SPEC. TITLE
PAGE
REV ISSUE DATE
PRODUCT GROUP
P3 TFT- LCD PRODUCT
18 OF 27
2010.04.27
7.0 MECHANICAL CHARACTERISTICS
7.1 Dimensional Requirements
FIGURE 6 (located in Appendix) shows mechanical outlines for the model HV320WXC-100.
Other parameters are shown in Table 5.
<Table 5. Dimensional Parameters>
mm 0.51(H) 0.51(V) Pixel pitch
mm 697.685 (H) 392.256(V) Active area
pixels 1366(H) 768(V) (1 pixel = R + G + B dots) Number of pixels
Direct Light 4 U_CCFL type Back-light
gram 5300 (typ) Weight
mm 760.0(H) 450.0 (V) 48.0 (D) Dimensional outline
Unit Specification Parameter
7.2 Mounting
See FIGURE 5. (shown in Appendix)
7.3 Semi-Glare and Polarizer Hardness.
The surface of the LCD has an semi-glare coating to minimize reflection and a coating to reduce
scratching.
7.4 Light Leakage
There shall not be visible light from the back-lighting system around the edges of the screen as seen
from a distance 50cm from the screen with an overhead light level of 350 [lux.]
B2005-C001-O(3/3) A4(210 X 297)
SPEC. NUMBER
SPEC. TITLE
PAGE
REV ISSUE DATE
PRODUCT GROUP
P3 TFT- LCD PRODUCT
19 OF 27
2010.04.27
8.0 RELIABLITY TEST (TBD)
The Reliability test items and its conditions are shown in below.
<Table 6. Reliability Test Parameters >
Air : 15kV , 50pF/330,100Point ,1time/Point
Contact : 8kV , 150pF/330,100Point , 1time/Point
Gravity : 50G
Pulse width : 11msec, Sine wave
X, Y, Z Once for each direction
Frequency : 10 ~ 300 Hz, Sweep rate 10 min
Gravity / AMP : 1.5 G Sine
Period : X, Y, Z 30 min
Ta = -20 60 (0.5 hr), 100 cycle
Ta = 0 , 240hrs
Ta = 50 , 240hrs
Ta = 50 , 80%RH, 240hrs
Ta = -20 , 240 hrs
Ta = 60 , 240 hrs
Conditions
Electro-static discharge test
Shock test
(non-operating)
Vibration test
(non-operating)
Thermal shock
Low temperature operation test
High temperature operation test
High temperature & high humidity
operation test
Low temperature storage test
High temperature storage test
Test Items
9
8
7
6
5
4
3
2
1
No
B2005-C001-O(3/3) A4(210 X 297)
SPEC. NUMBER
SPEC. TITLE
PAGE
REV ISSUE DATE
PRODUCT GROUP
P3 TFT- LCD PRODUCT
20 OF 27
2010.04.27
9.0 Product Serial Number
MV3?OWXC1OO
B2005-C001-O(3/3) A4(210 X 297)
SPEC. NUMBER
SPEC. TITLE
PAGE
REV ISSUE DATE
PRODUCT GROUP
P3 TFT- LCD PRODUCT
21 OF 27
2010.04.27
10.0 PACKING INFORMATION
BOE provides the standard shipping container for customers, unless customer specifies their packing
information. The standard packing method and Barcode information are shown in below.
10.1 Packing Order
B2005-C001-O(3/3) A4(210 X 297)
SPEC. NUMBER
SPEC. TITLE
PAGE
REV ISSUE DATE
PRODUCT GROUP
P3 TFT- LCD PRODUCT
22 OF 27
2010.04.27
10.2 Packing Note
y Box Dimension : 874 u 284 u 545 mm
y Package Quantity in one Box : 4pcs
10.3 Box label
y Label Size : 108 mm (L) 56 mm (W)
y Contents
Model : HV320WXC
Q`ty : Module Q`ty in one box
Serial No. : Box Serial No. See next page for detail description.
Date : Packing Date
FG Code : FG Code of Product
00 0 0 00 0 0 00000
_pc Cradc Lnc Ycar Monl lLMCOlL :cral_no
FG CODE
HV320WXC- 100
0000000000000 z0T0.01.zo.
1
B2005-C001-O(3/3) A4(210 X 297)
SPEC. NUMBER
SPEC. TITLE
PAGE
REV ISSUE DATE
PRODUCT GROUP
P3 TFT- LCD PRODUCT
23 OF 27
2010.04.27
11.0 HANDLING & CAUTIONS
(1) Cautions when taking out the module
y Pick the pouch only, when taking out module from a shipping package.
(2) Cautions for handling the module
y As the electrostatic discharges may break the LCD module, handle the LCD
module with care. Peel a protection sheet off from the LCD panel surface as
slowly as possible.
y As the LCD panel and back - light element are made from fragile glass material,
impulse and pressure to the LCD module should be avoided.
y As the surface of the polarizer is very soft and easily scratched, use a soft dry
cloth without chemicals for cleaning.
y Do not pull the interface connector in or out while the LCD module is operating.
y Put the module display side down on a flat horizontal plane.
y Handle connectors and cables with care.
(3) Cautions for the operation
y When the module is operating, do not lose CLK, ENAB signals. If any one of
these signals is lost, the LCD panel would be damaged.
y Obey the supply voltage sequence. If wrong sequence is applied, the module
would be damaged.
(4) Cautions for the atmosphere
y Dew drop atmosphere should be avoided.
y Do not store and/or operate the LCD module in a high temperature and/or
humidity atmosphere. Storage in an electro-conductive polymer packing pouch
and under relatively low temperature atmosphere is recommended.
(5) Cautions for the module characteristics
y Do not apply fixed pattern data signal to the LCD module at product aging.
y Applying fixed pattern for a long time may cause image sticking.
(6) Other cautions
y Do not disassemble and/or re-assemble LCD module.
y Do not re-adjust variable resistor or switch etc.
yWhen returning the module for repair or etc., Please pack the module not to be
broken. We recommend to use the original shipping packages.
B2005-C001-O(3/3) A4(210 X 297)
SPEC. NUMBER
SPEC. TITLE
PAGE
REV ISSUE DATE
PRODUCT GROUP
P3 TFT- LCD PRODUCT
24 OF 27
2010.04.27
Figure 2. White Luminance and Uniformity Measurement Locations
12.0 APPENDIX
(| 5 O c m )
Figure 1. Measurement Set Up
Active Area
Test points
1/2V
1/4V
3/4V
1/4H 1/2H 3/4H
B2005-C001-O(3/3) A4(210 X 297)
SPEC. NUMBER
SPEC. TITLE
PAGE
REV ISSUE DATE
PRODUCT GROUP
P3 TFT- LCD PRODUCT
25 OF 27
2010.04.27
Figure 3. Response Time Testing
M +qh O iay (B i+qhl) |cw O iay (O aik) |cw O iay (O aik)
T+m e
E
+
e
c
l
i
c
O
o
l
+
c
a
+
R
e
s
o
c
n
s
e
OO
O
1O
1OO
Tf Ti
B2005-C001-O(3/3) A4(210 X 297)
SPEC. NUMBER
SPEC. TITLE
PAGE
REV ISSUE DATE
PRODUCT GROUP
P3 TFT- LCD PRODUCT
26 OF 27
2010.04.27
Figure 5. TFT-LCD Module Outline Dimensions (Front view)
B2005-C001-O(3/3) A4(210 X 297)
SPEC. NUMBER
SPEC. TITLE
PAGE
REV ISSUE DATE
PRODUCT GROUP
P3 TFT- LCD PRODUCT
27 OF 27
2010.04.27
Figure 6. TFT-LCD Module Outline Dimensions (Rear view)

Panel Boe Hv320wxc-100 0 (DS)

Uploaded by

Copyright:

Available Formats

Panel Boe Hv320wxc-100 0 (DS)

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Panel Boe Hv320wxc-100 0 (DS)

Uploaded by

Copyright:

Available Formats

Global LCD Panel Exchange Center www.panelook.

You might also like