Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 261 views

    E560 Bcu04 DS

    Uploaded by

    Yasser Ragab
    Bus Connection Unit 560BCU04 is designed to make the RTU560s TSI, TSO, Alarm and Warning signals accessible to the outside. Up to 8 560CMUxx communication units can be used in a rack configuration (23TP22, 560MPR03) to expand the system bus to another rack, an 8 pole RJ 45 connector is available.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    E560 Bcu04 DS

    Uploaded by

    Yasser Ragab
    261 views6 pages
    Bus Connection Unit 560BCU04 is designed to make the RTU560s TSI, TSO, Alarm and Warning signals accessible to the outside. Up to 8 560CMUxx communication units can be used in a rack configuration (23TP22, 560MPR03) to expand the system bus to another rack, an 8 pole RJ 45 connector is available.

    Original Title

    E560_BCU04_DS

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Bus Connection Unit 560BCU04 is designed to make the RTU560s TSI, TSO, Alarm and Warning signals accessible to the outside. Up to 8 560CMUxx communication units can be used in a rack configuration (23TP22, 560MPR03) to expand the system bus to another rack, an 8 pole RJ 45 connector is available.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    261 views6 pages

    E560 Bcu04 DS

    Uploaded by

    Yasser Ragab
    Bus Connection Unit 560BCU04 is designed to make the RTU560s TSI, TSO, Alarm and Warning signals accessible to the outside. Up to 8 560CMUxx communication units can be used in a rack configuration (23TP22, 560MPR03) to expand the system bus to another rack, an 8 pole RJ 45 connector is available.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 6

    RTU560

    Data Sheet Bus Connection Unit 560BCU04


    Doc.-No.: 1KGT 150 727 V003 1 1
    Bus Connection Unit
    560BCU04
    Application
    The Bus Connection Unit 560BCU04 R0001 is
    designed to make the RTU560s TSI, TSO, Alarm
    and Warning signals accessible to the outside.
    By using the bus connection unit 560BCU04
    R0001, up to 8 560CMUxx communication units
    can be used in a rack configuration (23TP22,
    560MPR03).
    To expand the RTU560 system bus to another
    rack (23TP22, 560MPR03), an 8 pole RJ 45 con-
    nector is available. For cabling, a shielded 8 pole
    RJ 45 patch cable can be used.
    Characteristics
    The Bus Connection Unit 560BCU04 R0001 is
    used in the racks 23TP22 or 560MPR03. It is
    available in two versions: The 560BCU04 R0001,
    containing a basic board and a termination board,
    and the 560BCU04 R0002, containing the exten-
    sion boards for the connection of additional
    CMUs.
    The 560BCU04 R0001 basic board is mounted on
    the 19 pole process interface connector of the
    rightmost used CMU slot in the rack. The 2nd or
    next CMUs are connected by using the
    560BCU04 R0002 extension board. Via ribbon
    cables, the 560BCU04 connects the RTU560
    communications bus to all CMU slots.
    The leftmost CMU needs a bus termination real-
    ized by means of the 560BCU04 R0001 termina-
    tion board. It is essential to always place the ter-
    mination board as last board in the rack (see Fig.
    3).
    All supply voltages and control signals are inter-
    faced by a ribbon cable connection from the rack
    to the 560BCU04 R0001. To enable operation us-
    ing a 23TP22 rack, +24 VDC needs to be con-
    nected to a screw terminal connector.
    The system signals ALARM and WARNING can
    be accessed via relay contacts and are super-
    vised with a watchdog function. If the trigger from
    the communication unit is missing for more than
    30 seconds, both relay contacts are activated and
    the contacts are closed.
    The external minute interrupt of a real time clock
    560RTCxx is connected to the system via an in-
    ternal isolated optical-coupler (TSI) and routed to
    the time master of the RTU560 system. The mi-
    nute pulse output (TSO) is available for other ap-
    plications.
    Also the signals for supervising redundant power
    supply units are distributed.
    If it is intended to use a single CMU inside a
    standalone rack only a unit 560BCU04 R0003 is
    required for correct bus termination (see Fig. 4).
    Thus without usage of ALR, WRN, TSI, TSO and
    supervision of redundant power supply units.
    Figure 1: Function Block Diagram
    560BCU04 R0001 Basic board
    RTU560
    Data Sheet Bus Connection Unit 560BCU04
    Doc.-No.: 1KGT 150 727 V003 1 2
    Figure 2: Basi c board, part 1 of 560BCU04 R0001
    Figure 3: Extension board, 560BCU04 R0002
    Figure 4: Termination board, part 2 of 560BCU04 R0001
    RTU560
    Data Sheet Bus Connection Unit 560BCU04
    Doc.-No.: 1KGT 150 727 V003 1 3
    Figure 5: Termination board 560BCU04 R0003
    for si ngl e CPU usage
    Figure 6: Assembl y 560MPR03, 560BCU04 R0001 and R0002
    RTU560
    Data Sheet Bus Connection Unit 560BCU04
    Doc.-No.: 1KGT 150 727 V003 1 4
    Figure 7: Assembl y 560MPR03 and 560BCU04 R0003
    RTU560

    Data Sheet Bus Connection Unit 560BCU04
    Doc.-No.: 1KGT 150 727 V003 1 5
    Technical Data
    In addition to the general technical data of the
    RTU560, the following applies:
    Minute Pulse Input (TSI)
    X11 Plug-in terminal strip 2-pole,
    24 VDC input, isolated
    Minute Pulse Output (TSO)
    X10 Plug-in terminal strips 2-pole,
    24 V DC output
    Rack-to-Rack Interface
    X17 RJ 45 connector 90
    Signal Outputs
    ALARM
    WARNING
    Plug-in terminal strips 2-pole
    each
    Relay contact Active closed, WARNING is
    set also in case of ALARM.
    1 A / 60 V DC / 30 W
    Watchdog
    Supervision
    time
    Approx. 30 seconds
    Compliances
    EMC
    Environmental
    Safety
    EN550011, EN61000
    EN60255, IEC60870
    EN60950
    Voltage Supply
    Supply 5 V DC / approx. 80 mA
    24 V DC / approx. 60 mA
    Supply (external)
    +24V Screw terminal connection
    only in case of 23TP22 rack
    Mechani cs
    PCB 126 x 92 mm
    Weight Approx. 0.1 kg
    Connection Type
    X19 19 pol. Process interface
    connector
    Environmental Conditi ons
    Nominal operating
    temperature range
    Startup
    Storage temperature
    range
    -25C +70C
    -40C
    -40C +85C
    Relative Humidity
    (EN60068 2-30)
    5 95 %
    (non condensing)
    Ordering Information
    560BCU04 R0001
    (part 1: Basic board
    part 2: Termination
    board)
    1KGT 022300 R0001
    560BCU04 R0002
    (Extension board)
    1KGT 022300 R0002
    560BCU04 R0003
    (Termination board)
    1KGT 022300 R0003
    RTU560

    Data Sheet Bus Connection Unit 560BCU04
    Doc.-No.: 1KGT 150 727 V003 1 6
    Note:
    We reserve the right to make technical changes or modify the contents
    of this document without prior notice. With regard to purchase orders,
    the agreed particulars shall prevail. ABB AG does not accept any re-
    sponsibility whatsoever for potential errors or possible lack of infor-
    mation in this document.
    We reserve all rights in this document and in the subject matter and
    illustrations contained therein. Any reproduction, disclosure to third
    parties or utilization of its contents - in whole or in parts is forbidden
    without prior written consent of ABB AG.
    Copyright2013 ABB
    All rights reserved

    You might also like