Voss Catalog

VOSS Fluid GmbH
Postfach 15 40
51679 Wipperfrth
Ldenscheider Strae 5254
51688 Wipperfrth
Tel.: +49 2267 63-0
Fax: +49 2267 63-5621
+49 2267 63-5622
+49 2267 63-5623
uid@voss.net
www.voss.net
Tube coupling technology catalogue
Tube couplings
Flange couplings
Hydraulic valves
Pre-assembly devices
Tools and accessories
9
1
7
7
0
0
3
1
0
2
/
2
0
1
3
1
1
/
0
1
/
0
3
.
0
/
1
5

V
O
S
S

F
l
u
i
d

G
m
b
H

2
0
1
3
T
u
b
e

c
o
u
p
l
i
n
g

t
e
c
h
n
o
l
o
g
y

c
a
t
a
l
o
g
u
e
VOSS Fluid GmbH sales organisation
Germany
VOSS Fluid GmbH
Postfach 15 40
51679 Wipperfrth
Ldenscheider Strae 5254
51688 Wipperfrth
Tel. +49 2267 63-0
Fax +49 2267 63-5621
+49 2267 63-5622
+49 2267 63-5623
fluid@voss.net
www.voss.net
Brazil
VOSS Automotive Ltda
Av. Alvares Cabral, 1087
CEP 09980-160
Diadema So Paulo
Tel. +55 11 40539500
Fax: +55 11 40539524
fluid.br@voss.net
www.voss.com.br
China
VOSS Fluid (Xiamen) Co., Ltd.
No. 2 Yinhua Road
Guankou Town, Jimei District
Xiamen 361023
Tel. +86 592 6190600
Fax +86 592 6190619
fluidchina@voss.net
www.voss.net
France
VOSS Distribution S.a.r.l.
57 Route de Crcy
28500 Vernouillet
Tel. +33 237 380190
Fax +33 237 468914
info@fr.voss.net
www.fr.voss.net
Italy
VOSS S.r.l.
Via de Gasperi 31
20020 Lainate (MI)
Tel. +39 02 93796352
Fax +39 02 9373577
info@it.voss.net
www.it.voss.net
Spain
VOSS S.A.
Paseo del Comercio, 90
Apartado Correos, 1014
08203 Sabadell
Tel. +34 93 7106262
Fax +34 93 7116357
info@es.voss.net
www.es.voss.net
USA
VOSS Automotive, Inc.
7625 DiSalle Blvd.
Fort Wayne, IN 46825
Tel. +1 260 3732277
Fax +1 260 3732299
info@us.voss.net
www.vossusa.com
Dealers world-wide
Please request the latest
list of dealers from our
Wipperfrth sales office.
To ensure that VOSS products perform reliably, it is essential to follow the relevant operating and assembly instructions
and to adhere to the latest standards and regulations for general mechanical engineering. Make sure to use up-to-date
versions at all times.
Subject to errors, including printing errors, and technical modifications.
This catalog edition supersedes all previously published technical documents, catalogs, assembly instructions etc.
All preceding documents therefore become invalid with immediate effect.
Copyright 2013, VOSS Fluid GmbH
General Information
Overview of 24 tube couplings
Tube connecting parts, 24 connecting pieces and individual parts / accessories
Flange couplings / ZAKO / ZAKO LP
Hydraulic valves
Pre-assembly devices and tools
Assembly instructions
General technical notes
Services
Content Chapter

1
1
2
3
4
5
6
7
8
9

2
General information
p
a
s
s
io
n
a
t
e
ly
c
o
n
n
e
c
t
e
d

3
1
VOSS is partner to vehicle manufacturing and mechan-
ical engineering companies, providing tubing and
connection technology for fluid systems.
Thanks to its strong customer focus, its innovations and
outstanding quality, the company founded in 1931 has
developed into an international corporate group. VOSS
Holding is the parent organization under which VOSS
Automotive GmbH, VOSS Fluid GmbH and 11 foreign
subsidiaries are grouped.
With production facilities in Austria and abroad and sales
companies in Europe and overseas, VOSS is one of the top
suppliers of fluid system components VOSS Automotive
serving the vehicle engineering and VOSS Fluid for the
mechanical engineering sectors.
VOSSs product range includes connecting elements,
ready-to-install tubing, valves and other components for
use in pneumatic, hydraulic, fuel and air-conditioning
systems.
VOSS, as a development partner and system provider
offering a comprehensive product range, is committed to
active participation in ongoing decision-making processes
in the fluid engineering industry.
Company headquarters: Factory and administration in Wipperfrth
The company

4
Machine components for connection and coupling technology
Voss Fluids uncompromising quality policy and application-
specific quality objectives, well documented in all certifi-
cates and approvals required by relevant trade associations
and professional bodies, have ensured the company a top
place in all its established markets.
With a wide range of system stocks all around the world
and a global network of authorized trade dealers, VOSS
ensures maximum product availability and highly economi-
cal delivery systems. These range from KANBAN full service
right up to full optimization of the customers supply chain.
VOSS Fluid also offers a wide range of special services,
including regular training sessions and application-related
publications. The internal and external logistics of the entire
VOSS corporate group bring customers considerable cost
advantages, allowing just-in-time production without
having to maintain large stocks of their own.
A full product range plus top quality: this is the princi-
ple VOSS follows to produce one of the worlds most
comprehensive product ranges for tube coupling
systems. The entire product spectrum is available as a
catalogue.
The VOSS programme includes cutting ring, soft seal and
flared couplings, tube forming systems, flange couplings
and a wide range of accessories. VOSS puts special
emphasis on the development of customized system solu-
tions covering the entire task range from initial planning,
engineering production, assembly and installation, right up
to special logistics services.
VOSS Fluid also offers convincing value-added services
and improvement proposals that take purchasing costs,
assembly and installation effort, durability of leak-tightness
and long-term corrosion protection into account.n.
As a standard feature, all products in the extensive product
range have optimum corrosion protection, provided by a
top-quality VOSS coat surface finish containing no hexa-
valent chromium. Extensive salt-spray tests conducted in
accordance with DIN EN ISO 9227 have shown that
corrosion resistance is retained even after 1,000 hours of
practical conditions, i.e. after handling and assembly.

5
1
VOSS corporate environmental policy
Working in close cooperation with authorities and
customers, VOSS constantly determines and
evaluates existing environmental protection require-
ments. This forms the basis for all our activities to
constantly reduce existing environmental burdens
and comply with statutory regulations.
The public, as well as any other interested persons
and organizations can obtain information on our
environment-related activities at any time.
VOSS encourages its contractual partners to apply
the same standards as VOSS itself does.
Energy efficiency is a major consideration when
acquiring plant, equipment and services.
We are constantly improving our energy balance by
implementing dedicated measures.
The management of the VOSS corporate group
consid ers environmental protection to be an important
part of business management and the basis of long-
lasting company success.
VOSS employees are integrated at all levels into the
groups efforts to protect and reduce the burden
on the environment on a permanent basis, and their
awareness for the environment is encouraged by
training and other activities.
VOSS evaluates the impact of all new developments
(both products and processes) on the environment
with the aim of keeping this impact to a minimum.
The impact of activities on the local environment are
regularly monitored and evaluated.
Where it is impossible to avoid negative impact on the
environment, one of the companys explicit objectives
is to continuously reduce this impact.
In order to put this policy into practice, defined pro-
cedures and specifications regulating the relevant
technical and organizational procedures are in place
within the company.
10
9
8
7 1
2
3
4
5
6
11

6
Overview of 24 tube couplings

7
2
The right connections for all
applications
P.11
The Complete Range of VOSS
Couplings
P.12
24 taper coupling range with a
wide variety of system solutions
P.14
The main advantages of 24
couplings
P.15
How to obtain a permanently leak-
free connection system
P.16
Requirements / System features
P.17
2S cutting ring couplings
P.19
Content Type/Page

8
2S plus cutting ring couplings
P.21
ES-4 cutting ring couplings
P.25
2SVA / ES-4VA cutting ring
couplings
P.29
VOSSForm
SQR
/ VOSSForm
SQR
VA
tube couplings
P.31
BV-10 flared couplings
P.35
24 taper couplings / welding
couplings
P.39
Customer designed products
individualized customer solutions
P.43
Content Type/Page

9
2
2S
2S plus
ES-4
BV-10
DKO
VOSSForm
SQR
The right connections for all applications
Flange couplings
Weld nipples

11
2
The Complete Range of VOSS Couplings
Connection components
2S cutting rings
P. 58
24-2S-
2S plus cutting rings
P. 59
24-2SP-
ES-4 cutting rings
P. 60
24-ES4-
2SVA cutting rings
P. 58
24-2S--SST
ES-4VA cutting rings
P. 60
24-ES4--SST
Union nuts
P. 62
24-N-
SQR-Union nuts
and seals
P. 64
24-SQRNMS-
SQRVA-Union nuts
and seals
P. 64
24-SQRNMS--SST
BV-10 Union nuts
P. 69
24-BV10N-
BV-10 Clamping rings BV-10 flared cones
P. 68
24-BV10R-
P. 66
24-BV10C-
Male Stud Couplings Connecting Couplings
Adjustable Stud Couplings with tube socket
Elbow Stud Standpipe Adapters,
metric/imperial,
parallel, PEFLEX
P. 144
24-SWE-
P. 149
24-SWSDS-
T Stud Standpipe Adapters,
NPT
P. 145
24-SWT-
P. 151
24-SWSDS-
L Reducing inserts
P. 146
24-SWL-
P. 152
24-SWS--
Stud Standpipe Adapters,
metric/imperial,
parallel, seal edge
P. 147
24-SWSDS-
24 Taper Couplings
Straight, DKO T, DKO
P. 158
24-SW2OS-
P. 166
24-SWOT-
Elbow, DKO L, DKO 45, DKO Stud Standpipe Adapters,
DKO, metric/imperial,
parallel, PEFLEX
P. 164
24-SWOE-
P. 167
24-SWOL-
P. 165
24-SWOE45-
P. 168
24-SWOSDS-
Reducing Couplings,
DKO
P. 171
24-SWOS--
metric/imperial/NPT
tapered
P. 80
24-SDS-
metric/imperial,
parallel, seal edge
P. 85
24-SDS-
metric/imperial,
parallel, PEFLEX
P. 91
24-SDS-
UN/UNF,
O-ring
P. 97
24-SDS-
Straight
P. 112
24-S-
Reducing Couplings Elbow
P. 113
24-S--
P. 115
24-E-
metric, parallel,
ISO 6149, O-Ring
P. 100
24-SDS-
Elbow, metric/imperial,
tapered
P. 102
24-SDE-
L, metric/imperial,
tapered
P. 106
24-SDL-
T, metric/imperial,
tapered
P. 108
24-SDT-
T
P. 116
24-T-
T-Reduction Cross
P. 117
24-T---
P. 120
24-K-

12
Banjo and Rotary Couplings Welding Couplings
Straight Welding Bosses
P. 186
24-WDS-
Welding Bulkhead
Couplings
P. 187
24-WDBHS-
Welding Nipples
with O-ring seal
P. 188
24-WDNPSO-
metric/imperial
parallel, Standard design
metric/imperial, parallel,
Low-restrictive design
P. 126
24-BSE-
P. 130
24-BEE-
high pressure
P. 134
24-BCE-
rotary coupling
P. 140
24-RCE-
Bulkhead Couplings Adjustable Couplings with lock nut
Straight
P. 122
24-BHSLN-
Elbow
P. 123
24-BHELN-
Elbow, metric/imperial,
parallel
L, metrisch, zylin.,
ISO 6149, O-Ring
P. 178
24-SDAE-
P. 182
24-SDAL-
Elbow, metric, parallel,
ISO 6149, O-ring
L, metric, parallel,
ISO 6149, O-ring
P. 180
24-SDAE-
P. 183
24-SDAT-
45, metric, parallel,
ISO 6149,
O-ring
P. 181
24-SDAE45-
Female stud
and gauge couplings Flange Couplings
Straight Female Stud
Couplings, metric/imperial
Gauge Couplings,
DKO
Gauged Couplings,
standard couplings
P. 192
24-S-
P. 197
24-SWOPGS-
Gauge Couplings,
male version
P. 195
24-PGS-
P. 196
24-SWPGS-
Component Parts and Accessories for couplings
Thread reducing adapters,
straight
P. 198
GP-SDS-
Blanking Screws
P. 203
GP-PLIH-...
Blanking Plugs
P. 206
24-PLOC-
Tube Blanking Screws Reinforcing Sleeves
P. 209
24-TBS-
P. 211
24-RS-
Hydraulic-Valves
Non-Return Valves
tube coupling on both
ends
P. 309
24-VNRO-
Non-Return Valves
female thread
P. 310
GP-VNROI-
Non-Return Valves
screw in thread
P. 312
24-VNROPT-
Non-Return Valves
screw in thread
Non-Return Valves
Plug-In Cartridges
Shuttle Valves
Ball seat / Soft sealing
P. 314
24-VNROTP-
P. 321
GP-VNRCO-
P. 323
24-VST-
Straight, square
Straight, SAE
P. 246
24-FSO--HC-
P. 250
24-FSO-
Elbow, square
Elbow, SAE
P. 247
24-FEO--HC-
P. 252
24-FEO-
ZAKO tube-to-port
flange couplings, SAE,
3000/6000 psi
ZAKO tube-to-tube
flange couplings, square
P. 264
Z-TPO-
P. 274
Z-TTO--HC--
ZAKO tube-to-tube
flange couplings, SAE,
3000/6000 psi
ZAKO LP tube-to-port
flange couplings, SAE
ZAKO tube-to-port
flange couplings, square
ZAKO LP tube-to-tube
flange couplings, SAE
P. 268
Z-TTO-
P. 286
Z-TPO-LP
P. 272
Z-TPO--HC--
P. 287
Z-TTO-LP

13
2
24
VOSS 24 DIN tube couplings as specified in ISO 8434-1
and DIN 2353 are among the most widespread hydraulic
coupling systems worldwide. Thanks to their tremendous
advantages, this type of tube connection has become firmly
established, particularly in Europe, Asia and South America.
Product details
This product range consists of a light-weight and a heavy-
duty series (L and S) which differ with regard to pressure
ratings and dimensions.
All stated nominal pressure ratings (PN) are designed for a
four-fold safety factor.
For the tube connection end, various coupling systems can
be adapted to suit the particular application, with the 24
conical bore serving as the sealing surface.
The broad range of VOSS Fluid screw couplings covers a
wide variety of shapes, such as elbow, T and L couplings.
These are available in a variety of designs, such as connec-
tion couplings, bulkhead couplings, stud couplings and
stud couplings with adjustable flow direction. To supple-
ment this range, VOSS also offers diverse special designs
such as adapters, gauge couplings, blanking plugs and
non-return valves.
A wide variety of thread and seal types conforming to
international standards can be supplied for the screw
connections.
24 taper coupling range with a wide variety of system solutions

14
The main advantages of 24 couplings
n This type of coupling is leak-tight and can resist alter-
nating bending moments and pressure transients
as well as preventing tubes from tearing out of the
connec tion.
n The connection can be taken apart and re-assembled
as often as desired. This is particularly important for
servicing and maintenance.
n Various tube connection systems can be combined
with the 24 coupling bodies to suit the application.
This makes it possible to modify a system which
normally uses purely metallic sealing into one with
additional soft sealing functions.
n These tube couplings provide maximum leak-tightness
even when subjected to very high system pressures
(up to 800 bar), although they have compact external
dimensions and are easy to assemble and install.
n The permitted system pressures of the couplings are
specified for a safety factor of 4. This ensures adequate
reserve strength in case of overloads.
n A wide range of designs is available, making it possible
to apply a modular design concept when select ing
components. In this way special couplings and
un necessary tube loops in installation spaces can be
avoided. A wide variety of metric and imperial threads
and seal types is also available for the male threaded
variants.
n The 24 system is a universal standard and is therefore
in widespread use, particularly in Europe, Asia and
South America. Hose couplings can also be connected
easily to this system.
n These tube connections are easy to assemble.
n Under normal conditions, subsequent re-tightening is
not necessary when 24 coupling systems are used.
The coupling cannot come apart by itself.
n A lightweight series is available for lower system
pressures up to 500 bar. These couplings cost less,
save weight, occupy less space and permit higher flow
rates.
n The optimum tube clamping achieved by the 24
coupling system keeps the connection flexible enough
to absorb piping system vibration. As opposed to this,
permanent connections are rigid and often tend to tear
apart.
n All VOSS couplings are supplied with a VOSS coat
protective finish as a standard feature. This provides
the best possible corrosion protection.
n Many independent certification bodies have confirmed
the functional characteristics of the entire coupling
system.

15
2
How to obtain a permanently leak-free connection system
Couplings that are leak-tight at all times improve the cost-
effectiveness of your products and improve their image.
The diversity of VOSS coupling systems and the wide
range of types available offer a suitable solution for almost
any application.
Taking the respective purpose and application into ac -
count, we offer the following recommendations concern-
ing design and selection of the correct coupling system.
Pay attention to the essentials
All main parameters such as pressure, volume flow rate,
ambient temperature, external influences, standard and/or
statutory requirements as well as the type of load expected
should be known when selecting the coupling system.
The cost-effectiveness of the coupling should also be
considered as an additional selection criterion. Apart from
the actual purchase price, acquisition costs, assembly/
in stallation efforts, leak-tightness sustainability and long-
term corrosion protection should be taken into account
when estimating the total cost.
Wherever possible, use a soft-seal system
throughout
Soft sealing systems prevent the development of minute
leakage paths which may occur due to settling of the
connection, temperature changes and vibration. The VOSS
Fluid product range allows the use of elastomers through-
out, both on the tube ends and on the male connection
side of the coupling. When selecting these seals, observe
the different seal material properties.
Trust on VOSS Fluid products for all
applications
Essentially, it is possible to combine connecting elements
made by different manufacturers, but we recommend the
exclusive use of components made by one and the same
manufacturer. VOSS Fluid products are perfectly matched
to each other and thus ensure optimum operation and
quality.
Take advantage of our wide application
know-how
VOSS Fluid and its authorized trade outlets have wide-
spread know-how on almost every conceivable application.
Reap the benefits of our experience and let us advise you
individually before you choose a system.
Always follow VOSS assembly and
installation instructions
Leaky connections are usually caused by assembly and
installation faults. This is why assembly, installation and
operating instructions must be strictly observed. VOSS
Fluid offers comprehensive training material as well as
practical training courses dealing with all tube connection
topics. If you wish, we can hold these at your premises and
provide valuable tips specially geared to your particular
production processes.
Let VOSS Fluid audit your company
regularly
You should check at regular intervals whether internal
production procedures have changed, e.g. due to the
employment of new fitters, or due to worn machinery or
other tools. We offer an audit service for inspecting your
assemblies and installation on site.
Check your tubing and hose routing
Make sure that your tubing and hoses are routed and
installed properly and that supports are evenly spaced.
Mechanical arrangements which are too rigid are not able
to absorb vibration whereas sloppily supported tubing
systems will tend towards vibrating.

16
Requirements
System features
2S 2S plus ES-4 VOSSForm
SQR
BV-10 VFS 90
(ORFS)
ZAKO
Standard DIN EN ISO
8434-1
DIN EN ISO
8434-1
DIN EN ISO
8434-1
DIN EN ISO
8434-1
DIN EN ISO
8434-1
DIN EN ISO
8434-1
and
SAE J 1453
DIN EN ISO
8434-1
Type of seal metallic metallic metallic +
soft sealing
metallic +
soft sealing
metallic +
soft sealing
metallic +
soft sealing
metallic +
soft sealing
Material steel/
stainless steel
steel steel/
stainless steel
steel/
stainless steel
steel steel steel
Series
Tube-OD
L/S
6-42
L/S
6-42
L/S
6-42
L/S
6-42
L/S
6-42 6-38 16-114.3
Pressure load capability
- static/dynamic loads
- transmission of external
forces
Temperature resistance
Corrosion resistance
Media resistance
Ease of assembly
- pre-assembly and
final assembly
- sources of error,
testing possibilities
On-site assembly
- without special tools
- possible repair solutions
Maintenance
- settling behaviour under
continuous load
- permanent fine sealing
Flow behaviour
- cross-section reduction,
dead spaces
- pressure loss,
noise
System reliability
- tearing out, tube fracture
- reliability of assembly
excellent very good good average

17
2
2S cutting ring couplings
Product information

19
2
X Y Z
VOSS 2S cutting ring tube couplings conform to the latest
standards with regard to design and dimensions (DIN 2353
or ISO 8434-1).
They are designed for use with metric tubes. All dimen-
sions, such as spanner size across flats, holes and connec-
tion dimensions are metric.
VOSS 2S cutting ring tube couplings are characterized by
their high functional stability and practical assembly and
installation characteristics. The spring effect typical of the
2S cutting ring maintains the pre-tensioning forces for the
connection.
n Optimum incision by both cutting edges. The first cutting
edge of the 2S cutting ring produces the material pro-
trusion that is decisive for gripping of the tube. The
second cutting edge optimizes the overall function and
provides additional reliability by distributing the force
uniformly over the entire conical section.
Other advantages of VOSS 2S cutting ring tube couplings
are the broad range of types available, world-wide availa-
bility and their wide range of potential uses in hydraulic and
pneumatic engineering.
Function description
As integrated connection components, tube couplings
must fulfil their hold and seal purpose at all times. On the
screw-in coupling side, a wide range of standardized male
threads and related sealing options are available, along with
the corresponding hole patterns for flange connections.
Furthermore, even the smallest detail is important for tube
couplings. For example, the details of the current VOSS 2S
cutting ring have evolved over many years of development
work. Its special characteristics are:
n Extreme leak-tightness due to the pre-tensioning forces
applied during final assembly. Use of state-of-the-art cal-
culation methods meant that it was possible to determine
a function-optimized match between the assembly forces
and the surface pressures required to seal the connection.
n Elastic behaviour due to the spring effect typical of
VOSS cutting rings. This is obtained by the interaction of
geometry and material characteristics once assembly is
completed. Elastic pre-tensioning compensates the
settling phenomena of materials under dynamic loads.
General note
In order for the VOSS 2S cutting ring couplings to fulfill
their function, it is extremely important that the Installation
in structions and the note in the technical remarks are
followed exactly. Incorrect handling will lead to risks with
regard to safety and leaking of the connection.
strong raised
material
closed field of force
surface pressure
X = positive locking
Y = elastic region
Z = clamping
2S cutting ring
tube
ISO 8434-1
connecting
piece
DIN 3870 / ISO 8434-1
union nut
2S cutting ring tube couplings

20
For that extra bit of safety
2S plus cutting ring couplings

21
2
X Y Z
As world-wide system partner for hydraulic coupling tech-
nology, VOSS Fluid ensures the highest possible process
reliability of your products at all times. Here, not only
correct advice on the choice of product and the quality of
VOSS products are important, but also correct assembly
and installation by users.
Our experience has shown that this is where the greatest
optimization potential lies.
lncorrect assembly and installation automatically lead to
leaks in the hydraulic system, not all of which are immedi-
ately detected. Faulty assembly and installation can there-
fore impair leak-tightness of your products in the long term.
The new 2Splus range offers best possible safety thanks
to its dual-cutting edge technology, tried and tested millions
of times over, paired with the best possible installation pro-
perties and high load-bearing strength, thus raising stand-
ards in hydraulic connection technology to a new level.
Reliable dual cutting-edge technology
The feed movement when the union nut is tightened
causes the first strong cutting edge to cut into the tube,
pushing up material in front of the cutting edge. This
massive material accumulation ensures firm seating of the
cutting ring. The second, trailing cutting edge determines
the depth to which the first cutting edge penetrates and
also prevents any further cutting into the tube material.
Furthermore, the second cutting edge ensures uniform
force distribution over the entire conical surface, as an
additional counteracting force is transmitted by the tube
in the area of the cut. Together, the two cutting edges
provide maximum protection against the cutting ring being
twisted off the tube.
Thanks to the special contour of the 2Splus cutting ring,
the preloading forces achieved once assembly is com-
pleted can be sustainably maintained. This spring effect
in the middle section of the cutting ring compensates
settling effects of the connection under dynamic loads. The
2Splus range is therefore also ideally suited for use under
conditions where greater vibration and alternating bending
loads occur.
strong raised
material
Product information, 2S plus cutting ring tube couplings
X = positive locking
Y = elastic region
Z = clamping

22
Process reliability, also during assembly
The new block stop significantly increases the assemblys
reliability. Over-tightening during assembly, which is the
cause of many leaks, is prevented by the special contour
of the 2S plus cutting ring. Whenever an attempt to over-
tighten the assembly is made, the tightening torque rapidly
increases, giving the user direct feedback.
The results of direct comparative tests between 2Splus
cutting rings and products manufactured by competitors
showed significantly sharper force increases for the
2Splus when over-tightening was simulated giving an
unmistakable signal effect for the user, and providing a
reliable way of preventing incorrect assembly.
Repeated disassembly and reassembly is no problem at all.
The union nut is simply tightened with the same torque
as during original assembly. The assembly procedure for
the 2Splus coupling is identical to that used for the
2S cutting ring couplings, providing additional benefit for
ex perienced users.
Maximum load-bearing capability
The sturdy geometry surrounding the block stop addition-
ally protects the 2Splus cutting ring against deformation
and ensures positive force transmission throughout the
entire system.
Apart from achieving matching high surface pressures of
the metallic sealing surfaces, this also offers another
benefit:
The 2Splus cutting ring can be used for even the most
extreme system pressures, up to 500 bar in the light L
series and up to 800 bar in the heavy S series and that
at four-fold safety levels!
Flexible application options
Selective influencing of material properties during produc-
tion not only makes 2Splus cutting rings suitable for use
with metric steel tubes, but also for applications with tubes
made of stainless steel.
T
i
g
h
t
e
n
i
n
g

t
o
r
q
u
e

i
n

N
m
Rotation angle in
= competitors product
= VOSS 2S plus cutting ring

23
2
ES-4 cutting ring couplings
The soft-seal connection with 4-fold benefits

25
2
1 2
Static loads
Assuming that a leak develops in the metallic sealing zone
while the assembly is exposed to static pressure loads, the
full operating pressure would build up and act on the front
of the soft seal however with a considerable time delay. In
such cases, complete enclosure of the soft-seal elements
without any gaps ensures reliable sealing.
VOSS 2S ring as the basis
The basis for the soft seal coupling is the proven VOSS
tube couplings conforming to DIN 2353 / ISO 8434-1.
In this design, the 2S cutting ring is supplemented by soft
seals fitted on the secondary side.

The reliable functional properties of 2S cutting rings remain
totally unaffected:
n In the final assembled state, loading by bending
moments is counteracted adequately by support from
the broad contact area and by the uninterrupted force
transfer.
n In addition, the first, strong cutting edge and the
additional second cutting edge ensure a secure hold i.e.
for tear-out protection in the case of sudden pressure
increases.
VOSS ES-4: soft seal couplings in accordance with
DIN / ISO and with 4-fold benefits:
1. Design based on the tried and tested VOSS 2S cutting ring.
2. Additional precision sealing using soft sealing elements
made of FPM/FKM.
3. Reliable leak-tightness thanks to gap-free chambering of
the soft seals.
4. Guided assembly up to the tightening torque limit.
With ES-4, VOSS engineers have developed a soft-seal
coupling that not only offers additional reliability, but is also
much more economical.
As regards the tube connection side, ES-4 couplings cover
the application range between the proven 2S cutting ring
coupling for standard applications and 10 flared couplings
for heavy loads and high stresses.
Leak prevention
The special moulded seal in the groove on the cutting ring
taper and the additional O-ring between the cutting ring
and the tube eliminate leaks which might otherwise occur
due to slackening of the metallic seal, e. g. due to creep
characteristics.
Dynamic loads
If the medium succeeds in passing the metallic sealing
zone when there is an alternating pressure load, it is stop-
ped by the soft seals located behind the metal seal. The
arrangement of the elastomer seals behind the metallic
sealing zone means that the alternating pressures can only
act on the soft seal after being considerably damped. This
quasi-static load, which is lower than the operating
pressure, ensures e xcellent long-term stability of the
elastomers.
ES-4 cutting ring
tube
connecting
piece
ISO 8434-1
DIN 3870 /
ISO 8434-1 union nut
Product information, ES-4 tube couplings
1 = metallic seal 2 = soft seal

26
Additional precision seal with defined seal chambers.
The precision seals prevent the familiar sweating effects of
purely metallic seals:
The special moulded seal of the ES-4 cutting ring, which
is set into a groove in the cutting ring taper, seals off any
possible leakage path between the cutting ring and the
connecting piece.
An additional O-ring prevents leakage between the
cutting ring and the tube.
As a result, both soft seals are located behind the tried and
tested metallic seal. With this arrangement, dynamic and
static loads are intercepted in the primary zones, i.e. at the
metallic sealing points, and only act on the soft seals in a
virtually static manner.
Another advantage is that the soft seals are contained in
stable, gap-free retention spaces once the cutting rings
have been fitted. This prevents extrusion of the soft seals
even when exposed to full system pressure.
Safety through block installation
The strong, gap-free enclosure of the fine seal is obtained
by a block installation of the ES-4 cutting ring. This is
achieved by pressing the moulded seal more strongly onto
the coupling taper and by the gap-free radial contact of the
cutting ring to the outside tube surface in the area around
the O-ring seal. For this purpose, the cutting ring geometry
is designed in such a way that maximum possible elasticity
is achieved despite the block effect.
Block installation also ensures that the depth of incision is
limited, thus counteracting tube constriction when joining
thin-walled tubes
It also makes over-tightening of the connection much more
difficult.
The same assembly forces are required for block installa-
tion as for 2S cutting rings. Also, the same procedure for
checking correct cutting ring incision, as required by the
standard, can be applied here, and the fitter can use the
same working methods and tools.
The economic advantages:
ES-4 couplings offer not only a high degree of security
against leaks, but additional economic benefits as well:
Cost and time-intensive corrective measures are no
longer required. Production failures are avoided.
Dry connections help improve the image of the final
product, giving final customers advantages over their
competitors.
With the introduction of the ES-4 couplings, VOSS offers
a consistent soft seal system. The user can reduce the
number of suppliers considerably and thus minimize the
number of orders required.
As ES-4 couplings consist of DIN/ISO connecting pieces
and DIN/ISO nuts, the user does not need to establish
and maintain a stock of special parts.
As the user needs to change neither assembly
procedures nor tools, additional costs for training and
tools are avoided.
Conclusion: In view of the advantages offered by ES-4
couplings regarding greatest possible leak protection, they
are an interesting economical alternative from the cost-
benefit aspect.
before assembly
after assembly

27
2
2SVA / ES-4VA cutting ring couplings

29
2
VOSS offers both
2SVA 2-cutting-edge rings and ES-4VA stainless-steel soft-
sealing cutting rings.
The standard cutting ring with 2 cutting edges for
reliable connection of your piping.
The first cutting edge produces a strong raised material
section, ensuring that the tube is held securely.
The following, second cutting edge provides additional
safety to deal with higher vibration and alternating bending
loads. The fact that this cuts into the tube later balances
out the assembly forces.
The elastic behaviour of the ring maintains the pre-tension
applied by the assembly forces and prevents leaks which
may develop due to settling effects or critical pressure
peaks.
ES-4VA soft-sealing cutting rings for maximum safety
against leaks in the high-precision sector.
Especially for applications with highly sensitive liquids,
100-percent precision sealing is imperative for protection of
the environment and for economical process design.
The four known advantages of the ES-4 cutting rings for
steel also apply to ES-4VA cutting rings.
1. Based on tried and tested VOSS 2S cutting rings.
2. Additional precision seal in the secondary area a soft
seal made of FPM / FKM between the cutting ring and
the connecting piece creating a labyrinth sealing effect
between the cutting ring and the tube.
3. Hermetic encapsulation of the soft seal to prevent it
being pressed out when subjected to pressure-change
loading, ensuring maximum elastomer service life.
4. Safe assembly thanks to the mechanical stop; over-
tightening or under-tightening is practically impossible.
Both cutting rings types can be fitted using standard VOSS
pre-assembly devices.
2SVA cutting ring
ES-4VA cutting ring
enclosed soft seal
in secondary region
labyrinth-type seal effect
on tube surface
2. trailing cutting edge
1. cutting edge makes a deep incision

30
VOSSForm
SQR
/ VOSSForm
SQR
VA tube couplings
Safety
Quality
Reliability

31
2
M
b
The main requirements placed on hydraulic tube connec-
tions can be summed up by three terms:
Safety, as the most important aspect.
Quality, without which permanent leak-tightness is not
possible.
Reliability, only an economical coupling achieves
market success.
The VOSSForm
SQR
tube coupling system fulfils these
requirements with its innovative design, based on VOSSs
proven design principles.
In the VOSSForm100 forming machine a contour is shaped
at the end of a commercially obtainable hydraulic tube.
When a soft seal and the special SQR function nut are
added, the result is a simple, high-quality connection.
Maximum load-bearing capacity and safety
The critical area is the transition from the formed contour
to the tube. Here, the forming process can cause the
material to become brittle. With the VOSSForm
SQR
system,
this weak point is effectively relieved. Firstly, the radius at
the transition minimizes the notch effect, and secondly, the
SQR nut with integrated clamping ring clamps the tube
radially around the circumference, absorbing the dynamic
loads outside of the critical area, thus increasing the
pressure load-bearing capacity and breakage resistance.
Safe assembly thanks to sure stop
Safe assemblies mean secure connections. With the
VOSSForm
SQR
system, the face of the tube end is pressed
against the bottom of a standard DIN/ISO connecting piece
during assembly. When the nut is tightened, a noticeable
increase in the required torque indicates that assembly
is concluded. Slack connections and over-tightening can
be virtually eliminated. In addition, the assembly length is
re duced and with this, the assembly time. The contour
formed on the end of the tube is inserted deeply into the
24 taper to ensure secure seating.
Product information VOSSForm
SQR
tube couplings
radius in corner
Transmission of dynamic loads by integrated clamping
ring
standard connecting piece in
accordance with DIN 3861 / ISO 8434-1
formed tube end
standard union nut in accordance
with DIN 3870 / ISO 8434-1
VOSSForm
SQR
assembly
Moulded seal made of FPM/FKM
clamping ring
(pressed into the nut)

32
p
t
Graph of dynamic pressure in the tube
Conventional connection system with soft seal in
primary section
VOSS system with soft seal in secondary section
High performance paired with simple connection assembly
and installation makes VOSSForm
SQR
a universal connection
for series production.
Tube forming with process safety
Forming tubes with the VOSSForm100 forming machine is
as simple as can be. The tube end is simply pushed in as
far as the stop plate and the forming process is monitored,
allowing for no mistakes. The inner mandrel on the forming
head prevents constriction of the tube in the formed area.
The inner tube diameter remains completely unchanged,
preventing pressure losses due to inward protrusions.
Cycle times between 7 and 15 seconds decrease assembly
times, especially in series production.
Soft seals ensure leak-tightness
Soft seals offer considerable advantages over purely
metallic seals. Any settling that occurs due to mechanical
loads is compensated, effectively preventing connection
sweating. A connection that remains completely leak-tight
even under the most stringent inspection is more eco-
nomical, protects the environment and demonstrates the
quality of the connection, and thus of the entire product.
The concept of locating the soft seal in the secondary
section as with the ES-4 cutting ring minimizes both
static and dynamic loads on the seal. The metallic primary
choking of fluid flow by the face of the tube dampens alter-
nating pressure loading effects. When static pressure loads
are applied, there is a long time delay before the pressure
acts on the seal. This arrangement ensures long-term
stability of the elastomer.
VOSS soft seal located in the secondary section of the
connection
Economical benefits
Avoidance of leaks, minimized assembly time and elimina-
tion of maintenance effort and expense make this a sound
economical solution. Low material costs and simple parts
handling, too, make VOSSForm
SQR
tube couplings ideal for
series production.
Complete product range
Successful use of connection systems requires a wide
range of products. The VOSSForm
SQR
system is based
on standardized components, meaning that the entire
range of VOSS DIN/ISO products can be used with the
VOSSForm
SQR
system.
VOSSForm
SQR
VA
The VOSSForm
SQR
VA forming system is provided for stain-
less steel applications. All components in this system are
made of stainless steel.
The same product characteristics and advantages found in
VOSSForm
SQR
for normal steel applications also apply here.
soft seal in the
secondary section
secure stop inside
connecting piece

33
2
The VOSSForm 100 forming machine guarantees time-
saving, reliable production of the VOSSForm
SQR
contours.
The monitored process, in conjunction with optimum tube
guidance, makes it virtually impossible to produce defective
forms due to incorrect operation.
Simple tool changes contribute considerably to reducing
processing times. The clamping jaws and forming head can
be replaced without tools. The distinctive marking of both
tools prevents assembly faults due to incorrect combina-
tions of tools and tube dimensions.
The forming process
Forming is started by pushing the tube against the stop
plate in the forming machine. The process is triggered by
pressing the Start button (1.).
The clamping jaws close and clamp the tube in place. The
stop plate is swung out of the forming area (2.).
The forming head moves forward and shapes the tube by
plastic deformation to produce the VOSSForm
SQR
contour
(3.).
The forming head is retracted and the clamping jaws open
again (4.).
Removal of the tube is monitored. This allows the machine
to automatically return to the idle position, and the next
tube forming sequence can be started without manual
reset (5.).
VOSSForm 100 tube forming machine
Optimum ergonomy and
user-friendliness
Single-handed locking by
snap catch on the tool
magazine
Attachment for crane
transportation
Sastors with PU tyres
for easy transportation
Rubber
table-top
mat
Forming machine details
1. Tube inserted in machine
2. Clamping
3. Forming
4. Opening
5. Tube is removed, machine returns to idle position
stop plate
forming head
clamping jaw

34
For extreme load conditions

35
2
6 16 38 114,3
2S
ES-4 BV-10
10
10
ZAKO
The VOSS 10 flared coupling system complements
the tried and tested VOSS cutting ring programme for
heavy-duty and extreme load applications (see application
diagram). BV-10 flared couplings are the ideal solution
for applications exceeding the capacity of cutting ring
couplings, since the 10 flared coupling systems have
sustained ability to cope with alternating bending stresses,
sudden pressure increases, pressure peaks, vibrations and
temperature fluctuation.
At the tube end, this system as opposed to standard
systems applies a flare angle of 10.
The connection end toward the device either directly or
via a connecting piece is designed to fit off-the-shelf or
standardized connections. The combination of a flared
cone and clamping ring or a ZAKO ring and flange provides
excellent hold, ensuring maximum operational safety even
under extreme loads.
Both the BV-10 coupling and the ZAKO flange system are
based on the 10 flared coupling principle.
r
e
q
u
i
r
e
m
e
n
t
s
n
o
r
m
a
l

h
e
a
v
y

d
u
t
y

e
x
t
r
e
m
e
tube labyrinth
seal
t
u
b
e

c
e
n
t
e
r
i
n
g

a
n
d

s
u
p
p
o
r
t
ZAKO flange
Application diagram
external tube diameter [mm]
f
l
a
r
e
d

s
e
c
t
i
o
n
tube labyrinth
seal
t
u
b
e

c
e
n
t
e
r
i
n
g

a
n
d

s
u
p
p
o
r
t
f
l
a
r
e
d

s
e
c
t
i
o
n
Product information, 10 flared coupling system

36
Users are offered a complete range of couplings com-
prising both a light-weight and a heavy-duty series. The
BV-10 flared coupling is based on the use of DIN/ISO
coupling pieces with 24 cones, making it easily inter-
changeable with cutting ring and weld nipple systems.
As shown in the diagrams below, the tube clamp in con-
junction with the 10 flared cone of BV-10 flared couplings
provides the pre-loading required for a secure connection
to the tube. The sealing effect on the connecting piece is
ensured by the time-proven DKO head of the flared cone
with a metal sealing effect and by a completely enclosed
soft-seal packing.
On the tube connection side, the sealing effect is achieved
by surface pressure on the flared section and by the laby-
rinth seal effect of the small teeth on the cone surface.
The clamping ring presses on a large area of the tube end
and the flared cone, ensuring extremely high holding forces.
As a result, the system remains leak-tight even when
ex posed to vibrations or alternating bending moments.
The pressure ratings of VOSS BV-10 flared couplings
correspond to those of 24 taper couplings or 24 cutting-
ring couplings.
Advantages of the 10 flared coupling system
Hydraulic engineers will appreciate the following charac-
teristics of BV-10 tube couplings:
Particularly suitable for extreme loads and stresses.
The 10 flared cone principle ensures that tubing is held
without notching and incision effects.
Suitable for use with standard coupling hole diameters
and connecting pieces.
Easy assembly, even with thick-walled tubes.
Elimination of assembly errors, as the flared cone ring
has to be pre-assembled in a special assembly tool.
Suitable for stainless-steel tubes with tolerances as
specified in DIN 10305-1.
Complete range of couplings in the L and S series.
Note on safety:
Widely differing operating conditions often subject tube
connections to loads with unforeseeable parameters. To
ensure safe operation, please observe the following:
Always take the tube wall thickness into consideration as
well as the external diameter of the tube.
VOSS 10 flared couplings may only be pre-assembled
with VOSS pre-assembly machines especially designed
for this purpose.
Always observe the assembly instructions of the device
being used!
tube
BV-10
union nut
connecting
piece
ISO 8434-1
clamping ring
10 flared cone
tube labyrinth
seal
connecting piece
f
l
a
r
e
d

s
e
c
t
i
o
n
t
u
b
e

c
e
n
t
e
r
i
n
g

a
n
d

s
u
p
p
o
r
t

37
2
24 taper couplings / welding couplings

39
2
The 24 taper coupling is a logical further development to
provide an adjustable coupling with a tube socket and pre-
assembled cutting ring. The taper on the coupling body
achieves a particularly reliable and permanently stable
coupling connection.
The gripping function is achieved by a special union nut
with a wire pin located in a groove. In the assembled state,
the interlocked union nut ensures a coupling that reliably
stops the tube from being torn out.
Sealing is provided by an embedded O-ring. The result is a
perfect precision seal.
The broad range of different designs allows the production
of all common combinations of couplings with adjustable
directions. The connection dimensions conform exactly to
the DIN 2353 / ISO 8434-1 standards. This allows inter-
changeability with conventional adjustable spigot versions.
Special features:
VOSS taper couplings provide improved leak-tightness
and precision sealing by means of the precisely enclosed
O-ring seal.
They achieve long-term leak-tightness even under
extreme operating conditions, such as sudden pressure
increases, alternating bending loads and vibrations.
VOSS taper couplings can be assembled easily and
re liably. The optimum final function is achieved with a
short tightening travel and a practical final tightening
torque.
Repeated separation and re-assembly can be carried out
frequently and without any difficulty.
General Note
In order for the taper couplings to fulfil their function, it is of
utmost importance to follow the installation instructions and
the notes in the technical remarks exactly.
strong material compression
Product information 24 taper couplings

40
Distance adapters with sealing cone and O-rings
Distance adapters (spacers) for bore shapes W DIN 3861/
ISO 8434-1 are mainly used for extending couplings that
have been altered.
Furthermore, they can be used to replace existing cutting-
ring couplings without any great effort, e. g. due to main-
te nance work. This means that existing tubing can remain
in place.

Special features:
The VOSS taper coupling provides improved leak-tight-
ness and precision sealing by means of the precisely
enclosed O-ring seal.
It achieves long-term leak-tightness even under
ex treme operating conditions, such as sudden
pressure increases, alternating bending loads and
vibrations.
VOSS taper couplings can be assembled easily and
reliably. The optimum final function is achieved with a
short tightening travel and a practical final tightening
torque.
Repeated disassembly and reassembly poses no
problem.
Distance adapter with sealing cone and O-rings
Distance adapter

41
2
VOSS welding couplings and weld nipples supplement the
product range of conventional cutting ring, tube forming
and flared coupling systems.
Welding couplings are increasingly becoming a special
niche solution owing to their limited usability and high
costs, and the pre-treatment of the tube, welding
processes, specialized qualifications, post-treatment and
inspection involved.
VOSS weld nipples with a 24 taper and O-ring can be
combined with all tube couplings conforming to DIN 2353 /
ISO 8434-1 and the corresponding coupling pieces.
Product information, welding couplings

42
Customer designed products individualized customer solutions
As a competent system partner offering a wide range of
standardized and off-the-shelf components, VOSS Fluid
can offer individual special solutions and supply parts
produced to drawings according to the customers
specifications.
Our experience, creativity and cutting-edge production
technology can be used to develop individual solutions
which will win your approval and guarantee your success.
Our special products range from couplings for use as
length adapters, chokes, diameter adapters or special
designs, right up to and including non-return valves with
specific opening pressures.

43
2
Tube connection parts, 24 connecting piece range
and individual parts / accessories

45
3
The new sales designations of
Voss products
P.50
Cutting rings 2S 2SP ES4
P.58 P.59 P.60
DIN union nuts N
P.62
SQR-function nuts SQRNMS
P.64
BV-10 tube connecting parts BV10CO BV10R BV10N BV10SO
P.66 P.68 P.69 P.70
24/37 tube connecting parts 24/37AO 24/37R 24/37N 24/37SO
P.74 P.75 P.76 P.77
Male stud couplings SDS SDE SDL SDT
P.80 P.102 P.106 P.108
Content Type/Page

46
Connecting adapters S S E T T
P.112 P.113 P.115 P.116 P.117
K
P.120
Bulkhead couplings BHSLN BHELN
P.122 P.123
Banjo and rotary couplings BSE BEE BCE BCT RCE
P.126 P.130 P.134 P.138 P.140
Adjustable couplings with tube
socket, plug-in version
SWE SWT SWL SWSDS SWS
P.144 P.145 P.146 P.147 P.152
24 taper couplings SW2OS SW2OS SWOK SWOE SWOE45
P.158 P.160 P.163 P.164 P.165
SWOT SWOL SWOSDS SWOS SWOS
P.166 P.167 P.168 P.171 P.175
Content Type/Page

47
3
Adjustable couplings with lock nut SDAE SDAE SDAE45 SDAL SDAT
P.178 P.180 P.181 P.182 P.183
Welding couplings WDS WDBHS WDNPSO
P.186 P.187 P.188
Female stud and gauge couplings S PGS SWPGS SWOPGS
P.192 P.195 P.196 P.197
Thread reducing couplings SDS
P.198
Straight adapters ISO 6149 / DIN
3852
SDS
P.202
Blanking screws PLIH / PLEH
P.203
Blanking plugs / tube blanking
screws
PLB PLO / PLOC TBS
P.206 P.207 P.209
Content Type/Page

48
Hexagonal nuts LN
P.210
Reinforcing sleeves RS
P.211
Sealing rings ES4MS SR OR
(banjo c.)
PEFLEX OR
(DKO/BV-10)
P.216 P.217 P.218 P.220 P.225
OR
(flange c.)
SQRMS OR
(24/37)
P.227 P.228 P.229
Content Type/Page

49
3
Straight male stud coupling; size L18 with metric fine thread M22x1.5, cylindrical; completed with PEFLEX profile ring seal and
ES-4 cutting ring and union nut.
The new sales designations of Voss products
- - L C S SD 24
24 DIN program
Complete connection (with tube connecting system)
Stud coupling
Straight
Light series
The "system" characteristic describes the product line.
The function/component characteristic describes the product type.
Details on component shape.
Determines the series.
This characteristic identifies the components (e. g. hexagonal nut, union nut
and cutting ring, O-ring ) that can be used to complete the product type.
Complete couplings are supplied with 2S cutting rings by default, other
connection systems are listed in the Suffix characteristics.
System
Function/Component
Form
Completion
Series/Thread
Example: 24-SDSC-L18-M22E-ES4
System
Function/
Component
Form Completion
Series/
Thread
This catalog contains a new, alphanumerical sales
de signation system based to a large extent on ISO 8434-1.
This makes the designation self-explanatory and facilitates
identification of the products. Since the structure is based
on English, the designation is understood internationally.
Furthermore, the new sales designations make it possible
to generate customized special solutions by combining
variations of the existing VOSS product program.

50
Elastomeric sealing
- - 18 M 22 E ES4
ES-4 cutting ring
Deviations from the default characteristics (e. g. seal materials, completion
using different cutting-ring systems, flared coupling parts, special
dimensions)
Type of seal for the connecting thread.
Suffix 5
Sealing type/Threaded bore
Metric
OD in L series
22 mm
States the nominal thread size (pitch is not stated for metric and imperial
thread sizes).
States the outer diameter of the tube.
Identifies the type of thread.
Diameter
Thread
Tube OD/Diameter
Tube OD/
Diameter
Thread Diameter
Sealing type/
Threaded bore
Suffix
The new VOSS sales designation will in future be used to
replace the order numbers that have been used up to now
for the product pages in the catalog.
Examples of how to order items, as well as additional
explanations and variation options are given in the
respective chapters and in the following pages for the
individual product groups.

51
3
System
24 24 DIN program
GP General program (components and accessories, applicable in different connecting systems)
Function
Component 37
24/37A 24/37 adapter
24/37N 24/27 nuts
24/37R 24/37 rings
24/37S 24/37 sets
Cutting rings
1S 1S Cutting rings
2S 2S Cutting rings
2SP 2S plus Cutting rings
ES4 ES-4 Cutting rings
ES4MS ES-4 Moulded seals
ES4OR ES-4 O-rings
BV-10
BV10C BV-10 Cones
BV10N BV-10 Union nuts
BV10R BV-10 Clamping rings
BV10S BV-10 Sets
Plugs
PLB Plugs, metal-to-metal sealing
PLO Plugs with O-rings
Sealings
OR O-rings
PEFLEX PEFLEX sealing rings
SR Sealing rings
Sleeves
RS Reinforcing sleeves
Screws
PLEH Plug screws with external hex
PLIH Plug screws with internal hex
TBS Tube blanking screws
VOSSForm
SQR
SQRMS SQR Moulded seals
SQRN SQR-function nut without moulded seal
Banjo couplings
BE Banjo couplings, eccentric design
BC Banjo couplings, compact design
BS Banjo couplings, standard design
System
Function/
Component
Form Completion
Series/
Thread
Tube OD/
Diameter
Thread Diameter
Sealing type/
Threaded bore
Suffix

52
Diagnostic couplings
PG Pressure gauges
Swivel couplings
SW Swivel couplings with cutting ring and nut
SWO Swivel with O-ring
SWOPG Swivel with O-ring with pressure gauges
SWOSD Swivel studs with O-ring
SWPG Swivel pressure gauges
SWSD Swivel stud with cutting ring and nut
SW2O 2-sided swivels with O-ring
Weld-on/Weld-in couplings
WDBH Weld-in bulkhead couplings
WDNP Welded nipples
WD Weld-on couplings
Others
BH Bulkhead couplings
LN Locknuts
N Union nuts
RC Rotary couplings
SD Stud couplings
SDA Stud couplings adjustable
Form
E Elbow
E45 45 elbow
K Cross
L L
S Straight
T Tee
Completion
C Complete connection (with tube connecting system)
LN Locknut
LNC Complete connection with locknuts
MS Moulded sealing SQR
O O-ring enclosed
X Tube socket not pre-assembled / only body
XC Complete connection at tube side, tube socket not pre-assembled
System
Function/
Component
Form Completion
Series/
Thread
Tube OD/
Diameter
Thread Diameter
Sealing type/
Threaded bore
Suffix

53
3
Series/Thread
Series
LL Extra light series
L Light series
S Heavy series
L/S Light and heavy series are identical
Thread
M Metric
G Whitworth parallel
R Whitworth tapered
U UNF
N NPT
IM Internal thread, metric
IG Internal thread, Whitworth parallel
Tube OD/Diameter
6 6 mm
8 8 mm
10 10 mm
12 12 mm
14 14 mm
15 15 mm
16 16 mm
18 18 mm
20 20 mm
22 22 mm
25 25 mm
28 28 mm
30 30 mm
35 35 mm
38 38 mm
42 42 mm
A Metal-to-metal at face sealing
B Metal-to-metal sealing shoulder
E Elastomeric sealing
F O-ring sealing
T Tapered
System
Function/
Component
Form Completion
Series/
Thread
Tube OD/
Diameter
Thread Diameter
Sealing type/
Threaded bore
Suffix

54
Suffix overview
Suffix 4 Sealing material
Suffix 5 Completion
Suffix 6 Differing dimension
Suffix 7 Material / Strength
Suffix 8 Coating
Suffix 11 Customized product
Sufxes not referred to here are not relevant to this chapter.
Note: For articles having more than one relevant sufx, these are listed in numerical order in the sales designation.
Suffix 4 Sealing material
EPDM80 EPDM 70-80
EPDM85 EPDM 85
FKM70 FKM 70
FKM80 FKM 80
FKM90 FKM 90
NBR80 NBR 70-80
NBR85 NBR 85
NBR90 NBR 90
Suffix 5 Completion
1S 1S Cutting ring
2SP 2S plus Cutting ring
ES4 ES-4 Cutting ring
BV10 BV-10 Set
24/37 24/37 Set
Height
H2,5 Height 2.5 mm

Length
LG17 Length 17 mm

Wrench size
WS19 Wrench size 19 mm

Others
P Prole material
Suffix 7 Material /Strength
ST Steel
SST Stainless Steel
BS Brass
System
Function/
Component
Form Completion
Series/
Thread
Tube OD/
Diameter
Thread Diameter
Sealing type/
Threaded bore
Suffix

55
3
Suffix 8 Coating
C00 Steel, blank, washed and oiled, production stage
C10 Steel, phosphated and oiled
C21 Zinc-nickel transparent passivated, sealed and lubricated
Suffix 11 Customized product
CP1 Differing to VOSS standard
System
Function/
Component
Form Completion
Series/
Thread
Tube OD/
Diameter
Thread Diameter
Sealing type/
Threaded bore
Suffix

56
Cutting rings

57
3
1S and 2S / 2SVA cutting rings

d1
l
d1
l
Series
Tube OD
d1
Pressure l Order designation
steel
Order designation
stainless steel
LL 4 PN 100 6.8 24-1S-LL4
LL 5 PN 100 7.8 24-1S-LL5
LL 6 PN 100 7.8 24-1S-LL6
LL 8 PN 100 7.8 24-1S-LL8

L/S 6 PN 315/630 8.8 24-2S-L/S6 24-2S-L/S6-SST
L/S 8 PN 315/630 8.8 24-2S-L/S8 24-2S-L/S8-SST
L/S 10 PN 315/630 9.8 24-2S-L/S10 24-2S-L/S10-SST
L/S 12 PN 315/630 9.8 24-2S-L/S12 24-2S-L/S12-SST

L 15 PN 315 10.2 24-2S-L15 24-2S-L15-SST
L 18 PN 315 10.2 24-2S-L18 24-2S-L18-SST
L 22 PN 160 11.5 24-2S-L22 24-2S-L22-SST
L 28 PN 160 11.5 24-2S-L28 24-2S-L28-SST
L 35 PN 160 13.5 24-2S-L35 24-2S-L35-SST
L 42 PN 160 13.5 24-2S-L42 24-2S-L42-SST

S 14 PN 630 10.2 24-2S-S14 24-2S-S14-SST
S 16 PN 400 10.2 24-2S-S16 24-2S-S16-SST
S 20 PN 400 12.5 24-2S-S20 24-2S-S20-SST
S 25 PN 400 12.5 24-2S-S25 24-2S-S25-SST
S 30 PN 400 13.5 24-2S-S30 24-2S-S30-SST
S 38 PN 315 13.5 24-2S-S38 24-2S-S38-SST

Cutting-rings for tube OD
6 - 12 mm are identical for
series L + S .
Series LL = 1S
Series L + S = 2S/2SVA
Example for comp. :
D04LLX
DIN 3861-ALL4-St
DPR06LX
ISO 8434-1-CR-L6-St
58
2S plus cutting rings

d1
l
Series
Tube OD
d1
L/S 6 PN 500/800 9.3 24-2SP-L/S6
L/S 8 PN 500/800 9.3 24-2SP-L/S8
L/S 10 PN 500/800 9.8 24-2SP-L/S10
L/S 12 PN 400/630 9.8 24-2SP-L/S12

L 15 PN 400 10.2 24-2SP-L15
L 18 PN 400 10.2 24-2SP-L18
L 22 PN 250 11.5 24-2SP-L22
L 28 PN 250 11.5 24-2SP-L28
L 35 PN 250 13.5 24-2SP-L35
L 42 PN 250 13.5 24-2SP-L42

S 14 PN 630 10.2 24-2SP-S14
S 16 PN 630 10.2 24-2SP-S16
S 20 PN 420 12.5 24-2SP-S20
S 25 PN 420 12.5 24-2SP-S25
S 30 PN 420 13.5 24-2SP-S30
S 38 PN 420 13.5 24-2SP-S38

series L + S .
Example for comp. :
ISO 8434-1-CR-L6-St
59
3
ES-4 / ES-4VA cutting rings
Standard material of moulded seals and
O-rings is FPM/FKM

d1
l
d1
l
Series
Tube OD
d1
steel
Order designation
stainless steel
L/S 6 PN 500/800 8.8 24-ES4-L/S6 24-ES4-L/S6-SST

L 15 PN 400 10.2 24-ES4-L15 24-ES4-L15-SST
L 18 PN 400 10.2 24-ES4-L18 24-ES4-L18-SST
L 22 PN 250 11.5 24-ES4-L22 24-ES4-L22-SST
L 28 PN 250 11.5 24-ES4-L28 24-ES4-L28-SST
L 35 PN 250 13.5 24-ES4-L35 24-ES4-L35-SST
L 42 PN 250 13.5 24-ES4-L42 24-ES4-L42-SST

S 14 PN 630 10.2 24-ES4-S14 24-ES4-S14-SST
S 16 PN 630 10.2 24-ES4-S16 24-ES4-S16-SST
S 20 PN 420 12.5 24-ES4-S20 24-ES4-S20-SST
S 25 PN 420 12.5 24-ES4-S25 24-ES4-S25-SST
S 30 PN 420 13.5 24-ES4-S30 24-ES4-S30-SST
S 38 PN 420 13.5 24-ES4-S38 24-ES4-S38-SST

series L + S .
Example for comp. :
ISO 8434-1-CR-L6-St
60
DIN union nuts

61
3
Union nuts

d1
SW3
d3
h
Series
Tube OD
d1
d3 Pressure SW3 h Order designation
steel
Order designation
stainless steel
LL 4 M 8 x 1 PN 100 10 11 24-N-LL4 24-N-LL4-SST
LL 5 M 10 x 1 PN 100 12 11.5 24-N-LL5 24-N-LL5-SST
LL 6 M 10 x 1 PN 100 12 11.5 24-N-LL6 24-N-LL6-SST
LL 8 M 12 x 1 PN 100 14 12 24-N-LL8 24-N-LL8-SST

L 6 M 12 x 1.5 PN 500 14 14.5 24-N-L6 24-N-L6-SST
L 8 M 14 x 1.5 PN 500 17 14.5 24-N-L8 24-N-L8-SST
L 10 M 16 x 1.5 PN 500 19 15.5 24-N-L10 24-N-L10-SST
L 12 M 18 x 1.5 PN 400 22 15.5 24-N-L12 24-N-L12-SST
L 15 M 22 x 1.5 PN 400 27 17 24-N-L15 24-N-L15-SST
L 18 M 26 x 1.5 PN 400 32 18 24-N-L18 24-N-L18-SST
L 22 M 30 x 2 PN 250 36 20 24-N-L22 24-N-L22-SST
L 28 M 36 x 2 PN 250 41 21 24-N-L28 24-N-L28-SST
L 35 M 45 x 2 PN 250 50 24 24-N-L35 24-N-L35-SST
L 42 M 52 x 2 PN 250 60 24 24-N-L42 24-N-L42-SST

S 6 M 14 x 1.5 PN 800 17 16.5 24-N-S6 24-N-S6-SST
S 8 M 16 x 1.5 PN 800 19 16.5 24-N-S8 24-N-S8-SST
S 10 M 18 x 1.5 PN 800 22 17.5 24-N-S10 24-N-S10-SST
S 12 M 20 x 1.5 PN 630 24 17.5 24-N-S12 24-N-S12-SST
S 14 M 22 x 1.5 PN 630 27 20.5 24-N-S14 24-N-S14-SST
S 16 M 24 x 1.5 PN 630 30 20.5 24-N-S16 24-N-S16-SST
S 20 M 30 x 2 PN 420 36 24 24-N-S20 24-N-S20-SST
S 25 M 36 x 2 PN 420 46 27 24-N-S25 24-N-S25-SST
S 30 M 42 x 2 PN 420 50 29 24-N-S30 24-N-S30-SST
S 38 M 52 x 2 PN 420 60 32.5 24-N-S38 24-N-S38-SST

To reduce the assembly forces,
the union nuts are
coated with wax lubricant.
Example for comp. :
M04LLX
DIN 3870-ALL4
M06LX
ISO 8434-1-N-L6-St
62
SQR-function nuts

63
3
VOSSForm
SQR
Steel / stainless-steel set comprising
SQR-function nuts
moulded seals
Standard moulded-seal material is FPM/FKM

d1
SW3
d3
h
d1
Series
Tube OD
d1
d3 Pressure SW3 h kg/100
ca.
Order designation
steel
Order designation
stainless steel
L 6 M 12 x 1.5 PN 500 14 14.5 1.1 24-SQRNMS-L6 24-SQRNMS-L6-SST
L 15 M 22 x 1.5 PN 400 27 17 4.7 24-SQRNMS-L15 24-SQRNMS-L15-SST
L 18 M 26 x 1.5 PN 400 32 18 6.9 24-SQRNMS-L18 24-SQRNMS-L18-SST
L 22 M 30 x 2 PN 250 36 20 8.9 24-SQRNMS-L22 24-SQRNMS-L22-SST

S 6 M 14 x 1.5 PN 800 17 16.5 2.0 24-SQRNMS-S6 24-SQRNMS-S6-SST
S 20 M 30 x 2 PN 420 36 24 11.3 24-SQRNMS-S20 24-SQRNMS-S20-SST
S 38 M 52 x 2 PN 420 60 32.5 34.4 24-SQRNMS-S38 24-SQRNMS-S38-SST

To reduce the assembly forces,
the union nuts are
coated with wax lubricant.
64
BV-10 tube connecting parts

65
3
Flared cones
Standard O-ring material is NBR

d4
d3
l
1
A
d4
d3
l
1
B
Series
Tube
d1 x s
Pressure d3 d4 l1 Form kg/100
ca.
Order designation
L 6 x 1 PN 500 2.9 4.2 16.5 A 0.3 24-BV10CO-L6x1
L 8 x 1 PN 500 4.9 6.2 18 A 0.4 24-BV10CO-L8x1
L 10 x 1 PN 500 6.3 8.2 19 A 0.6 24-BV10CO-L10x1
L 10 x 1.5 PN 500 5.5 7.2 19 A 0.6 24-BV10CO-L10x1,5
L 12 x 1 PN 400 8 10.2 21.5 A 0.9 24-BV10CO-L12x1
L 12 x 1.5 PN 400 7.5 9.2 21.5 A 0.8 24-BV10CO-L12x1,5
L 15 x 1.5 PN 400 10.2 12.2 21.5 A 1.1 24-BV10CO-L15x1,5
L 15 x 2 PN 400 9.1 11.3 21.5 A 1.2 24-BV10CO-L15x2
L 18 x 1.5 PN 400 13 15.2 22 B 1.5 24-BV10CO-L18x1,5
L 18 x 2 PN 400 12 14.3 22 B 1.6 24-BV10CO-L18x2
L 22 x 1.5 PN 250 16.2 19.2 23.5 B 2.0 24-BV10CO-L22x1,5
L 22 x 2 PN 250 16.2 18.3 23.5 B 2.0 24-BV10CO-L22x2
L 28 x 2 PN 250 21 24.3 27 B 3.8 24-BV10CO-L28x2
L 28 x 3 PN 250 19.5 22.3 27 B 3.6 24-BV10CO-L28x3
L 35 x 2 PN 250 28.5 31.3 31 B 5.3 24-BV10CO-L35x2
L 35 x 3 PN 250 26.5 29.3 31 B 6.1 24-BV10CO-L35x3
L 42 x 3 PN 250 33.5 36.3 31 B 7.7 24-BV10CO-L42x3

66
Flared cones

d4
d3
l
1
Series
Tube
d1 x s
Pressure d3 d4 l1 kg/100
ca.
Order designation
S 8 x 1.5 PN 800 4 5.2 20 0.5 24-BV10CO-S8x1,5
S 8 x 2 PN 800 3 4.2 20 0.5 24-BV10CO-S8x2
S 10 x 1.5 PN 800 5.5 7.2 21 0.8 24-BV10CO-S10x1,5
S 10 x 2 PN 800 4.5 6.2 21 0.8 24-BV10CO-S10x2
S 12 x 1.5 PN 630 7.5 9.2 22.5 1.0 24-BV10CO-S12x1,5
S 12 x 2 PN 630 6.5 8.2 22.5 1.1 24-BV10CO-S12x2
S 12 x 3 PN 630 4.5 6.2 22.5 1.1 24-BV10CO-S12x3
S 14 x 2 PN 630 8.5 10.3 26 1.5 24-BV10CO-S14x2
S 16 x 2 PN 630 10.5 12.3 26.5 1.8 24-BV10CO-S16x2
S 16 x 2.5 PN 630 9.5 11.3 26.5 1.6 24-BV10CO-S16x2,5
S 16 x 3 PN 630 8.5 10.3 26.5 1.8 24-BV10CO-S16x3
S 20 x 2 PN 420 13.5 16.3 32 3.4 24-BV10CO-S20x2
S 20 x 2.5 PN 420 13.5 15.3 32 3.3 24-BV10CO-S20x2,5
S 20 x 3 PN 420 12.5 14.3 32 3.5 24-BV10CO-S20x3
S 20 x 3.5 PN 420 11 13.3 32 3.1 24-BV10CO-S20x3,5
S 20 x 4 PN 420 10 12.3 32 3.1 24-BV10CO-S20x4
S 25 x 2.5 PN 420 18 20.3 34.5 5.9 24-BV10CO-S25x2,5
S 25 x 3 PN 420 17 19.3 34.5 6.1 24-BV10CO-S25x3
S 25 x 4 PN 420 15 17.3 34.5 6.5 24-BV10CO-S25x4
S 30 x 3 PN 420 22 24.3 34.5 6.8 24-BV10CO-S30x3
S 30 x 4 PN 420 20 22.3 34.5 7.4 24-BV10CO-S30x4
S 30 x 5 PN 420 17 20.3 34.5 8.5 24-BV10CO-S30x5
S 38 x 3 PN 420 30 32.3 38 8.9 24-BV10CO-S38x3
S 38 x 4 PN 420 27 30.3 38 12.8 24-BV10CO-S38x4
S 38 x 5 PN 420 25 28.3 38 12.0 24-BV10CO-S38x5
S 38 x 6 PN 420 23 26.3 38 11.8 24-BV10CO-S38x6

67
3
Clamping rings

d1
l
Series
Tube OD
d1
Pressure l kg/100
ca.
Order designation
L 6 PN 500 3.8 0.1 24-BV10R-L6
L 8 PN 500 3.8 0.1 24-BV10R-L8
L 10 PN 500 3.8 0.1 24-BV10R-L10
L 12 PN 400 3.8 0.2 24-BV10R-L12
L 15 PN 400 4.5 0.3 24-BV10R-L15
L 18 PN 400 4.5 0.4 24-BV10R-L18
L 22 PN 250 5 0.5 24-BV10R-L22
L 28 PN 250 5.5 0.5 24-BV10R-L28
L 35 PN 250 7 1.4 24-BV10R-L35
L 42 PN 250 7 1.6 24-BV10R-L42

S 8 PN 800 4.5 0.3 24-BV10R-S8
S 10 PN 800 4.5 0.3 24-BV10R-S10
S 12 PN 630 4.5 0.3 24-BV10R-S12
S 14 PN 630 6.5 0.5 24-BV10R-S14
S 16 PN 630 6.5 0.6 24-BV10R-S16
S 20 PN 420 9 1.1 24-BV10R-S20
S 25 PN 420 10 2.3 24-BV10R-S25
S 30 PN 420 10 2.6 24-BV10R-S30
S 38 PN 420 13.5 5.7 24-BV10R-S38

68
BV-10 union nuts

d1
SW3
d3
h
Series
Tube OD
d1
d3 Pressure SW3 h kg/100
ca.
Order designation
L 6 M 12 x 1.5 PN 500 14 17.8 1.2 24-BV10N-L6
L 8 M 14 x 1.5 PN 500 17 17.8 1.8 24-BV10N-L8
L 10 M 16 x 1.5 PN 500 19 18.8 2.2 24-BV10N-L10
L 12 M 18 x 1.5 PN 400 22 18.8 3.1 24-BV10N-L12
L 15 M 22 x 1.5 PN 400 27 20.3 5.0 24-BV10N-L15
L 18 M 26 x 1.5 PN 400 32 21.3 7.5 24-BV10N-L18
L 22 M 30 x 2 PN 250 36 24 9.9 24-BV10N-L22
L 28 M 36 x 2 PN 250 41 25 11.2 24-BV10N-L28
L 35 M 45 x 2 PN 250 50 28 17.2 24-BV10N-L35
L 42 M 52 x 2 PN 250 60 28 26.7 24-BV10N-L42

S 8 M 16 x 1.5 PN 800 19 20 2.5 24-BV10N-S8
S 10 M 18 x 1.5 PN 800 22 21.5 3.7 24-BV10N-S10
S 12 M 20 x 1.5 PN 630 24 21.5 4.1 24-BV10N-S12
S 14 M 22 x 1.5 PN 630 27 26 6.5 24-BV10N-S14
S 16 M 24 x 1.5 PN 630 30 26 8.1 24-BV10N-S16
S 20 M 30 x 2 PN 420 36 30.5 12.6 24-BV10N-S20
S 25 M 36 x 2 PN 420 46 38 28.4 24-BV10N-S25
S 30 M 42 x 2 PN 420 50 39 29.5 24-BV10N-S30
S 38 M 52 x 2 PN 420 60 46 45.2 24-BV10N-S38

69
3
Flared connecting parts
L series, complete

Series
Tube
d1 x s
Pressure kg/100
ca.
Order designation
L 6 x 1 PN 500 1.6 24-BV10SO-L6x1
L 8 x 1 PN 500 2.3 24-BV10SO-L8x1
L 10 x 1 PN 500 2.9 24-BV10SO-L10x1
L 10 x 1.5 PN 500 2.9 24-BV10SO-L10x1,5
L 12 x 1 PN 400 4.2 24-BV10SO-L12x1
L 12 x 1.5 PN 400 4.2 24-BV10SO-L12x1,5
L 15 x 1.5 PN 400 6.4 24-BV10SO-L15x1,5
L 15 x 2 PN 400 6.4 24-BV10SO-L15x2
L 18 x 1.5 PN 400 9.4 24-BV10SO-L18x1,5
L 18 x 2 PN 400 9.5 24-BV10SO-L18x2
L 22 x 1.5 PN 250 12.4 24-BV10SO-L22x1,5
L 22 x 2 PN 250 12.4 24-BV10SO-L22x2
L 28 x 2 PN 250 15.5 24-BV10SO-L28x2
L 28 x 3 PN 250 15.3 24-BV10SO-L28x3
L 35 x 2 PN 250 23.9 24-BV10SO-L35x2
L 35 x 3 PN 250 24.7 24-BV10SO-L35x3
L 42 x 3 PN 250 36.0 24-BV10SO-L42x3

70
Flared connecting parts
S series, complete

Series
Tube
d1 x s
Pressure kg/100
ca.
Order designation
S 8 x 1.5 PN 800 4.8 24-BV10SO-S8x1,5
S 8 x 2 PN 800 5.0 24-BV10SO-S8x2
S 10 x 1.5 PN 800 5.6 24-BV10SO-S10x1,5
S 10 x 2 PN 800 5.6 24-BV10SO-S10x2
S 12 x 1.5 PN 630 6.5 24-BV10SO-S12x1,5
S 12 x 2 PN 630 6.6 24-BV10SO-S12x2
S 12 x 3 PN 630 6.7 24-BV10SO-S12x3
S 14 x 2 PN 630 10.3 24-BV10SO-S14x2
S 16 x 2 PN 630 11.0 24-BV10SO-S16x2
S 16 x 2.5 PN 630 11.0 24-BV10SO-S16x2,5
S 16 x 3 PN 630 11.4 24-BV10SO-S16x3
S 20 x 2 PN 420 15.7 24-BV10SO-S20x2
S 20 x 2.5 PN 420 15.7 24-BV10SO-S20x2,5
S 20 x 3 PN 420 15.7 24-BV10SO-S20x3
S 20 x 3.5 PN 420 15.7 24-BV10SO-S20x3,5
S 20 x 4 PN 420 15.5 24-BV10SO-S20x4
S 25 x 2.5 PN 420 25.3 24-BV10SO-S25x2,5
S 25 x 3 PN 420 25.3 24-BV10SO-S25x3
S 25 x 4 PN 420 25.5 24-BV10SO-S25x4
S 30 x 3 PN 420 37.5 24-BV10SO-S30x3
S 30 x 4 PN 420 38.0 24-BV10SO-S30x4
S 30 x 5 PN 420 39.2 24-BV10SO-S30x5
S 38 x 3 PN 420 60.0 24-BV10SO-S38x3
S 38 x 4 PN 420 61.7 24-BV10SO-S38x4
S 38 x 5 PN 420 62.2 24-BV10SO-S38x5
S 38 x 6 PN 420 62.3 24-BV10SO-S38x6

71
3
24/37 tube connecting parts

73
3
24/37 adapter rings
Standard O-ring material is FPM/FKM

d1
d3
l
1
Series
Tube OD
d1
Pressure d3 l1 kg/100
ca.
Order designation
L/S 6 PN 500/630 3 11.5 0.3 24-24/37AO-L/S6
L/S 8 PN 500/630 5 12 0.4 24-24/37AO-L/S8
L/S 10 PN 500/630 6 12.5 0.6 24-24/37AO-L/S10
L/S 12 PN 400/630 8 12.5 0.8 24-24/37AO-L/S12

L 15 PN 400 11 12.5 1.0 24-24/37AO-L15
L 18 PN 400 14 13 1.3 24-24/37AO-L18
L 22 PN 250 17 14.2 2.1 24-24/37AO-L22
L 28 PN 250 23 14.7 2.9 24-24/37AO-L28
L 35 PN 250 28 18.5 6.1 24-24/37AO-L35
L 42 PN 250 35 20.5 8.1 24-24/37AO-L42

S 14 PN 630 9 14 1.2 24-24/37AO-S14
S 16 PN 630 11 15 1.5 24-24/37AO-S16
S 20 PN 400 14 18.5 2.8 24-24/37AO-S20
S 25 PN 400 19 20 4.0 24-24/37AO-S25
S 30 PN 400 23 22 6.0 24-24/37AO-S30
S 38 PN 400 30 26 9.3 24-24/37AO-S38

Weight without O-ring.
74
24/37 support sleeves

d3
d1
d4
l
1
Series
Tube OD
d1
Pressure d3 d4 l1 kg/100
ca.
Order designation
L/S 6 PN 500/630 7.6 10.2 10.5 0.2 24-24/37R-L/S6
L/S 8 PN 500/630 9.3 12.2 11 0.3 24-24/37R-L/S8
L/S 10 PN 500/630 11.5 14.2 12.5 0.4 24-24/37R-L/S10
L/S 12 PN 400/630 13.6 16.2 13 0.5 24-24/37R-L/S12

L 15 PN 400 17.5 20.2 14 1.0 24-24/37R-L15
L 18 PN 400 21 24.2 14.5 1.5 24-24/37R-L18
L 22 PN 250 24.2 27.8 18 1.7 24-24/37R-L22
L 28 PN 250 30.2 33.8 17 2.0 24-24/37R-L28
L 35 PN 250 38 42.7 19 3.8 24-24/37R-L35
L 42 PN 250 45 49.7 21 5.2 24-24/37R-L42

S 14 PN 630 17.5 20.2 14.5 1.2 24-24/37R-S14
S 16 PN 630 18.5 22 17 1.3 24-24/37R-S16
S 20 PN 400 24.2 27.8 17.5 2.5 24-24/37R-S20
S 25 PN 400 28.5 32.8 20 3.2 24-24/37R-S25
S 30 PN 400 34 39 21.5 4.9 24-24/37R-S30
S 38 PN 400 42 48.5 26.5 7.7 24-24/37R-S38

75
3
24/37 union nuts

d3
SW3
d4
h
Series
Tube OD
d3 Pressure d4 SW3 h kg/100
ca.
Order designation
L 6 M 12 x 1.5 PN 500 7.8 14 17 1.2 24-24/37N-L6
L 8 M 14 x 1.5 PN 500 9.5 17 18 1.9 24-24/37N-L8
L 10 M 16 x 1.5 PN 500 11.7 19 19.5 2.4 24-24/37N-L10
L 12 M 18 x 1.5 PN 400 13.8 22 20.5 3.5 24-24/37N-L12
L 15 M 22 x 1.5 PN 630 17.7 27 23 5.7 24-24/37N-L15-S14
L 18 M 26 x 1.5 PN 400 21.2 32 23 7.9 24-24/37N-L18
L 22 M 30 x 2 PN 400 24.4 36 27.5 11.5 24-24/37N-L22-S20
L 28 M 36 x 2 PN 250 30.4 41 27.5 12.5 24-24/37N-L28
L 35 M 45 x 2 PN 250 38.3 50 30 17.9 24-24/37N-L35
L 42 M 52 x 2 PN 250 45.3 60 34 32.4 24-24/37N-L42

S 6 M 14 x 1.5 PN 630 7.8 17 18 2.0 24-24/37N-S6
S 8 M 16 x 1.5 PN 630 9.5 19 19 2.4 24-24/37N-S8
S 10 M 18 x 1.5 PN 630 11.7 22 20.5 3.6 24-24/37N-S10
S 12 M 20 x 1.5 PN 630 13.8 24 21 4.1 24-24/37N-S12
S 14 M 22 x 1.5 PN 630 17.7 27 23 5.7 24-24/37N-L15-S14
S 16 M 24 x 1.5 PN 630 18.7 30 26.5 8.4 24-24/37N-S16
S 20 M 30 x 2 PN 400 24.4 36 27.5 11.5 24-24/37N-L22-S20
S 25 M 36 x 2 PN 400 28.7 46 30.5 23.1 24-24/37N-S25
S 30 M 42 x 2 PN 400 34.2 50 32 24.1 24-24/37N-S30
S 38 M 52 x 2 PN 400 42.3 60 38 37.0 24-24/37N-S38

76
24/37 flared connecting parts

Series
Tube OD
Pressure kg/100
ca.
Order designation
L 6 PN 500 1.7 24-24/37SO-L6
L 8 PN 500 2.6 24-24/37SO-L8
L 10 PN 500 3.4 24-24/37SO-L10
L 12 PN 400 4.8 24-24/37SO-L12
L 15 PN 400 7.7 24-24/37SO-L15
L 18 PN 400 10.7 24-24/37SO-L18
L 22 PN 250 15.3 24-24/37SO-L22
L 28 PN 250 17.4 24-24/37SO-L28
L 35 PN 250 27.8 24-24/37SO-L35
L 42 PN 250 45.7 24-24/37SO-L42

S 6 PN 630 2.5 24-24/37SO-S6
S 8 PN 630 3.1 24-24/37SO-S8
S 10 PN 630 4.6 24-24/37SO-S10
S 12 PN 630 5.4 24-24/37SO-S12
S 14 PN 630 8.1 24-24/37SO-S14
S 16 PN 630 11.2 24-24/37SO-S16
S 20 PN 400 16.8 24-24/37SO-S20
S 25 PN 400 30.3 24-24/37SO-S25
S 30 PN 400 35.0 24-24/37SO-S30
S 38 PN 400 54.0 24-24/37SO-S38

77
3
Male stud couplings

79
3
Straight male stud couplings
Male thread: metric fine thread, tapered

d1
SW1
dx
d2
l
g
i
Series
Tube OD
d1
d2 Pressure dx lg SW1 i kg/100
ca.
Order designation
LL 4 M 6 x 1 keg PN 100 2 20 9 8 0.6 24-SDS-LL4-M6T
LL 5 M 8 x 1 keg PN 100 3.5 20 11 8 0.6 24-SDS-LL5-M8T
LL 6 M 6 x 1 keg PN 100 2.5 20 11 8 0.6 24-SDS-LL6-M6T

L 6 M 10 x 1 keg PN 315 6 22 14 8 1.3 24-SDS-L6-M10T
L 8 M 10 x 1 keg PN 315 4 23 17 8 2.0 24-SDS-L8-M10T
L 8 M 12 x 1.5 keg PN 315 8 27 17 12 2.1 24-SDS-L8-M12T
L 10 M 14 x 1.5 keg PN 315 10 28 17 12 2.5 24-SDS-L10-M14T
L 12 M 16 x 1.5 keg PN 315 12 29 19 12 3.2 24-SDS-L12-M16T
L 15 M 18 x 1.5 keg PN 315 15 30 24 12 4.7 24-SDS-L15-M18T
L 18 M 22 x 1.5 keg PN 315 18 33 27 14 6.8 24-SDS-L18-M22T
L 18 M 24 x 1.5 keg PN 315 15 35 27 16 7.7 24-SDS-L18-M24T

S 6 M 12 x 1.5 keg PB 630 6 30 17 12 2.8 24-SDS-S6-M12T
S 8 M 14 x 1.5 keg PB 630 8 32 17 12 3.7 24-SDS-S8-M14T
S 10 M 16 x 1.5 keg PB 630 10 32 19 12 4.3 24-SDS-S10-M16T
S 12 M 18 x 1.5 keg PB 630 12 34 22 12 6.0 24-SDS-S12-M18T
S 14 M 20 x 1.5 keg PB 630 14 38 27 14 8.7 24-SDS-S14-M20T
S 16 M 22 x 1.5 keg PB 400 16 38 27 14 9.0 24-SDS-S16-M22T

Standard size Operating pressure PB 630 only
applies if holes with
female conical threads are available.
Example for comp. :
GE06LMX
DIN 2353-AL6-St
80
Male thread: Whitworth pipe thread, tapered

d1
SW1
dx
d2
l
g
i
Series
Tube OD
d1
ca.
Order designation
LL 4 R 1/8 PN 100 4 20 10 8 0.8 24-SDS-LL4-R1/8T
LL 5 R 1/8 PN 100 5 20 11 8 0.9 24-SDS-LL5-R1/8T
LL 6 R 1/8 PN 100 6 20 11 8 0.8 24-SDS-LL6-R1/8T
LL 6 R 1/4 PN 100 4.5 25 14 12 2.0 24-SDS-LL6-R1/4T
LL 8 R 1/8 PN 100 8 22 12 8 0.9 24-SDS-LL8-R1/8T
LL 8 R 1/4 PN 100 8 26 14 12 1.7 24-SDS-LL8-R1/4T

L 6 R 1/8 PN 315 6 22 14 8 1.2 24-SDS-L6-R1/8T
L 6 R 1/4 PN 315 6 26 14 12 1.9 24-SDS-L6-R1/4T
L 6 R 3/8 PN 315 4 28 19 12 3.6 24-SDS-L6-R3/8T
L 8 R 1/8 PN 315 8 23 14 8 1.5 24-SDS-L8-R1/8T
L 8 R 1/4 PN 315 8 27 17 12 2.2 24-SDS-L8-R1/4T
L 8 R 3/8 PN 315 8 28 19 12 3.4 24-SDS-L8-R3/8T
L 8 R 1/2 PN 315 8 30 24 14 5.9 24-SDS-L8-R1/2T
L 10 R 1/4 PN 315 10 28 17 12 2.3 24-SDS-L10-R1/4T
L 10 R 3/8 PN 315 10 28 19 12 3.1 24-SDS-L10-R3/8T
L 10 R 1/2 PN 315 10 31 24 14 5.6 24-SDS-L10-R1/2T
L 12 R 1/4 PN 315 12 29 19 12 2.8 24-SDS-L12-R1/4T
L 12 R 3/8 PN 315 12 29 19 12 3.3 24-SDS-L12-R3/8T
L 12 R 1/2 PN 315 12 31 24 14 5.5 24-SDS-L12-R1/2T
L 12 R 3/4 PN 315 9 34 30 16 8.2 24-SDS-L12-R3/4T
L 15 R 1/4 PN 315 15 30 24 12 4.4 24-SDS-L15-R1/4T
L 15 R 3/8 PN 315 15 30 24 12 4.4 24-SDS-L15-R3/8T
L 15 R 1/2 PN 315 15 32 24 14 5.8 24-SDS-L15-R1/2T
L 18 R 1/2 PN 315 18 33 27 14 6.4 24-SDS-L18-R1/2T
L 18 R 3/4 PN 315 14 35 30 16 10.9 24-SDS-L18-R3/4T
L 22 R 1/2 PB 160 22 35 32 14 8.1 24-SDS-L22-R1/2T
L 22 R 3/4 PB 160 22 37 32 16 9.6 24-SDS-L22-R3/4T
L 28 R 3/4 PB 160 28 38 41 16 13.9 24-SDS-L28-R3/4T
L 28 R 1 PB 160 28 40 41 18 15.6 24-SDS-L28-R1T

Continued on following page
Standard size Example for comp.:
GE06LRX
DIN 2353-BL6-St
81
3

d1
SW1
dx
d2
l
g
i
Series
Tube OD
d1
ca.
Order designation
S 6 R 1/4 PB 630 6 30 17 12 3.0 24-SDS-S6-R1/4T
S 8 R 1/4 PB 630 8 32 17 12 3.4 24-SDS-S8-R1/4T
S 10 R 3/8 PB 630 10 32 19 12 4.4 24-SDS-S10-R3/8T
S 12 R 1/4 PB 630 6 34 22 12 5.4 24-SDS-S12-R1/4T
S 12 R 3/8 PB 630 12 34 22 12 5.8 24-SDS-S12-R3/8T
S 14 R 3/8 PB 630 14 36 24 12 6.8 24-SDS-S14-R3/8T
S 14 R 1/2 PB 630 14 38 27 14 8.9 24-SDS-S14-R1/2T
S 16 R 3/8 PB 400 16 36 27 12 7.9 24-SDS-S16-R3/8T
S 16 R 1/2 PB 400 16 38 27 14 8.5 24-SDS-S16-R1/2T
S 20 R 1/2 PB 400 14 42 32 14 12.2 24-SDS-S20-R1/2T
S 20 R 3/4 PB 400 20 44 32 16 14.1 24-SDS-S20-R3/4T

82
Male thread: NPT (ANSI/ASME B 1 - 20.01.1983)

d1
SW1
dx
d2
l
g
i
Series
Tube OD
d1
d2 Pressure dx lg SW1 i Nm
-10 %
kg/100
ca.
Order designation
LL 4 1/8 NPT PN 100 4 21.9 11 9.9 15 0.9 24-SDS-LL4-N1/8T
LL 6 1/8 NPT PN 100 6 21.9 11 9.9 15 0.9 24-SDS-LL6-N1/8T
LL 8 1/8 NPT PN 100 8 23.9 12 9.9 15 1.0 24-SDS-LL8-N1/8T

L 6 1/8 NPT PN 315 6 23.9 12 9.9 15 1.2 24-SDS-L6-N1/8T
L 6 1/4 NPT PN 315 6 30 17 15.1 35 2.6 24-SDS-L6-N1/4T
L 8 1/8 NPT PN 315 8 24.9 14 9.9 15 1.5 24-SDS-L8-N1/8T
L 8 1/4 NPT PN 315 8 30.1 17 15.1 35 2.5 24-SDS-L8-N1/4T
L 8 3/8 NPT PN 315 8 31.2 19 15.2 55 3.9 24-SDS-L8-N3/8T
L 8 1/2 NPT PN 315 6 38.5 24 19.8 110 7.1 24-SDS-L8-N1/2T
L 10 1/8 NPT PN 315 10 27 17 9.9 15 2.3 24-SDS-L10-N1/8T
L 10 1/4 NPT PN 315 10 31.1 17 15.1 35 2.5 24-SDS-L10-N1/4T
L 10 3/8 NPT PN 315 10 32.2 19 15.2 55 3.7 24-SDS-L10-N3/8T
L 10 1/2 NPT PN 315 10 37.8 24 19.8 110 7.2 24-SDS-L10-N1/2T
L 12 1/4 NPT PN 315 12 32 19 15.1 35 3.2 24-SDS-L12-N1/4T
L 12 3/8 NPT PN 315 12 32.2 19 15.2 55 3.6 24-SDS-L12-N3/8T
L 12 1/2 NPT PN 315 12 36.8 24 19.8 110 6.4 24-SDS-L12-N1/2T
L 15 3/8 NPT PN 315 15 33.2 24 15.2 55 5.2 24-SDS-L15-N3/8T
L 15 1/2 NPT PN 315 15 37.8 24 19.8 110 6.8 24-SDS-L15-N1/2T
L 18 3/8 NPT PN 315 9 34.2 27 15.2 55 8.0 24-SDS-L18-N3/8T
L 18 1/2 NPT PN 315 18 38.8 27 19.8 110 7.2 24-SDS-L18-N1/2T
L 18 3/4 NPT PN 160 18 39.1 30 20.1 175 9.1 24-SDS-L18-N3/4T
L 22 1/2 NPT PN 160 22 40.8 32 19.8 110 9.9 24-SDS-L22-N1/2T
L 22 3/4 NPT PN 160 22 41.1 32 20.1 175 10.1 24-SDS-L22-N3/4T
L 28 1 NPT PN 160 28 47 41 25 265 17.2 24-SDS-L28-N1T
L 35 1 1/4 NPT PN 160 35 50.6 46 25.6 315 25.6 24-SDS-L35-N11/4T
L 42 1 1/2 NPT PN 160 42 53 55 26 385 35.2 24-SDS-L42-N11/2T

GE06L1/8NPTX
83
3

d1
SW1
dx
d2
l
g
i
Series
Tube OD
d1
d2 Pressure dx lg SW1 i Nm
-10 %
kg/100
ca.
Order designation
S 6 1/4 NPT PN 630 6 33.1 17 15.1 35 3.3 24-SDS-S6-N1/4T
S 8 1/4 NPT PN 630 8 35.1 17 15.1 35 3.8 24-SDS-S8-N1/4T
S 8 3/8 NPT PN 630 5 35 19 15.2 55 4.5 24-SDS-S8-N3/8T
S 10 1/8 NPT PN 630 4 30.9 19 9.9 15 4.0 24-SDS-S10-N1/8T
S 10 1/4 NPT PN 630 10 35.1 19 15.1 35 4.3 24-SDS-S10-N1/4T
S 10 3/8 NPT PN 630 10 35.2 19 15.2 55 4.8 24-SDS-S10-N3/8T
S 10 1/2 NPT PN 630 7 41.8 24 19.8 110 9.0 24-SDS-S10-N1/2T
S 12 1/4 NPT PN 630 12 37.1 22 15.1 35 5.8 24-SDS-S12-N1/4T
S 12 3/8 NPT PN 630 12 37.2 22 15.2 55 6.2 24-SDS-S12-N3/8T
S 12 1/2 NPT PN 630 12 41.8 24 19.8 110 9.0 24-SDS-S12-N1/2T
S 14 3/8 NPT PN 630 14 39 24 15.2 55 7.2 24-SDS-S14-N3/8T
S 14 1/2 NPT PN 630 14 43.8 27 19.8 110 9.9 24-SDS-S14-N1/2T
S 16 3/8 NPT PN 400 16 39.2 27 15.2 55 8.4 24-SDS-S16-N3/8T
S 16 1/2 NPT PN 400 16 43.8 27 19.8 110 9.4 24-SDS-S16-N1/2T
S 16 3/4 NPT PN 400 16 44 30 20.1 175 13.5 24-SDS-S16-N3/4T
S 20 1/2 NPT PN 400 20 47.8 32 19.8 110 12.7 24-SDS-S20-N1/2T
S 20 3/4 NPT PN 400 20 48.1 32 20.1 175 14.9 24-SDS-S20-N3/4T
S 20 1 NPT PN 400 16 55 36 25 265 25.0 24-SDS-S20-N1T
S 25 3/4 NPT PN 400 25 52.1 41 20.1 175 22.7 24-SDS-S25-N3/4T
S 25 1 NPT PN 400 25 57 41 25 265 28.1 24-SDS-S25-N1T
S 30 1 NPT PN 400 22 59 46 25 265 32.2 24-SDS-S30-N1T
S 30 1 1/4 NPT PN 400 30 59.6 46 25.6 315 39.3 24-SDS-S30-N11/4T
S 38 1 1/2 NPT PN 315 38 65 55 26 385 57.2 24-SDS-S38-N11/2T

Standard size
84
Male thread: metric fine thread, parallel
Sealing with seal edge

d1
SW1
dx
d2
d6
l
2
i
l
g
Series
Tube OD
d1
d2 Pressure d6 dx lg l2 SW1 i Nm
-10 %
kg/100
ca.
Order designation
L 6 M 8 x 1 PN 100 12 3 23.5 8.5 12 8 14 1.1 24-SDS-L6-M8B
L 6 M 10 x 1 PN 400 14 4 23.5 8.5 14 8 25 1.4 24-SDS-L6-M10B
L 6 M 12 x 1.5 PN 400 17 4 27 10 17 10 35 2.2 24-SDS-L6-M12B
L 6 M 14 x 1.5 PN 400 19 4 29 11 19 11 55 3.2 24-SDS-L6-M14B
L 6 M 16 x 1.5 PN 400 21 4 30.5 11.5 22 12 80 3.6 24-SDS-L6-M16B
L 8 M 10 x 1 PN 400 14 4 24.5 9.5 17 8 25 1.9 24-SDS-L8-M10B
L 8 M 12 x 1.5 PN 400 17 6 29 10 17 12 35 2.2 24-SDS-L8-M12B
L 8 M 14 x 1.5 PN 400 19 6 29 10 19 12 55 2.9 24-SDS-L8-M14B
L 8 M 16 x 1.5 PN 400 21 6 30.5 11.5 22 12 80 4.2 24-SDS-L8-M16B
L 8 M 18 x 1.5 PN 400 23 6 30.5 11.5 24 12 100 5.2 24-SDS-L8-M18B
L 8 M 22 x 1.5 PN 400 27 6 31 10 27 14 170 6.9 24-SDS-L8-M22B
L 10 M 10 x 1 PN 400 14 4 25.5 10.5 17 8 25 2.1 24-SDS-L10-M10B
L 10 M 12 x 1.5 PN 400 17 6 30 11 17 12 35 2.5 24-SDS-L10-M12B
L 10 M 14 x 1.5 PN 400 19 7 30 11 19 12 55 3.0 24-SDS-L10-M14B
L 10 M 16 x 1.5 PN 400 21 7 31.5 12.5 22 12 80 4.2 24-SDS-L10-M16B
L 10 M 18 x 1.5 PN 400 23 7 31.5 12.5 24 12 100 5.2 24-SDS-L10-M18B
L 10 M 22 x 1.5 PN 400 27 8 35 14 27 14 170 8.1 24-SDS-L10-M22B
L 12 M 12 x 1.5 PN 400 17 6 31.5 12.5 19 12 35 3.0 24-SDS-L12-M12B
L 12 M 14 x 1.5 PN 400 19 7 31.5 12.5 19 12 55 3.4 24-SDS-L12-M14B
L 12 M 16 x 1.5 PN 400 21 9 31.5 12.5 22 12 80 4.0 24-SDS-L12-M16B
L 12 M 18 x 1.5 PN 400 23 9 31.5 12.5 24 12 100 4.5 24-SDS-L12-M18B
L 12 M 22 x 1.5 PN 400 27 10 35 14 27 14 170 7.8 24-SDS-L12-M22B
L 15 M 16 x 1.5 PN 400 21 9 32 13 24 12 80 4.8 24-SDS-L15-M16B
L 15 M 18 x 1.5 PN 400 23 11 32.5 13.5 24 12 100 5.1 24-SDS-L15-M18B
L 15 M 22 x 1.5 PN 400 27 12 36 15 27 14 170 7.8 24-SDS-L15-M22B
L 15 M 26 x 1.5 PN 200 31 12 38 15 32 16 230 11.6 24-SDS-L15-M26B
L 15 M 33 x 2 PN 200 39 12 41 16 41 18 400 16.5 24-SDS-L15-M33B
Standard size Example for comp. :
GE06LM8x1X
ISO 8434-1-SDS-L6xM8x1-B-St
85
3

d1
SW1
dx
d2
d6
l
2
i
l
g
Series
Tube OD
d1
-10 %
kg/100
ca.
Order designation
L 18 M 16 x 1.5 PN 400 21 9 33 13.5 27 12 80 6.2 24-SDS-L18-M16B
L 18 M 18 x 1.5 PN 400 23 11 33.5 14 27 12 100 6.6 24-SDS-L18-M18B
L 18 M 22 x 1.5 PN 400 27 14 36 14.5 27 14 170 7.7 24-SDS-L18-M22B
L 18 M 26 x 1.5 PN 200 31 15 37 13.5 32 16 230 10.8 24-SDS-L18-M26B
L 18 M 33 x 2 PN 200 39 14 41 15.5 41 18 400 20.9 24-SDS-L18-M33B
L 22 M 18 x 1.5 PN 200 23 11 36 16.5 32 12 100 8.7 24-SDS-L22-M18B
L 22 M 22 x 1.5 PN 200 27 14 38 16.5 32 14 170 9.3 24-SDS-L22-M22B
L 22 M 26 x 1.5 PN 200 31 18 40 16.5 32 16 230 10.1 24-SDS-L22-M26B
L 22 M 33 x 2 PN 200 39 19 43 17.5 41 18 400 18.5 24-SDS-L22-M33B
L 22 M 42 x 2 PN 200 49 18 51 23.5 50 20 700 43.0 24-SDS-L22-M42B
L 28 M 26 x 1.5 PN 200 31 18 43 19.5 41 16 230 16.4 24-SDS-L28-M26B
L 28 M 33 x 2 PN 200 39 23 43 17.5 41 18 400 16.7 24-SDS-L28-M33B
L 35 M 26 x 1.5 PN 200 31 18 44 17.5 46 16 230 20.5 24-SDS-L35-M26B
L 35 M 42 x 2 PN 200 49 30 48 17.5 50 20 700 27.8 24-SDS-L35-M42B
L 42 M 42 x 2 PN 200 49 30 50 19 55 20 700 33.4 24-SDS-L42-M42B
L 42 M 48 x 2 PN 200 55 36 52 19 55 22 900 35.4 24-SDS-L42-M48B

Standard size
86

d1
SW1
dx
d2
d6
l
2
i
l
g
Series
Tube OD
d1
-10 %
kg/100
ca.
Order designation
S 6 M 12 x 1.5 PN 630 17 4 32 13 17 12 60 3.1 24-SDS-S6-M12B
S 8 M 12 x 1.5 PN 630 17 4 34 15 17 12 60 3.6 24-SDS-S8-M12B
S 8 M 14 x 1.5 PN 630 19 5 34 15 19 12 90 4.3 24-SDS-S8-M14B
S 8 M 18 x 1.5 PN 630 23 5 36.5 17.5 24 12 190 6.9 24-SDS-S8-M18B
S 8 M 22 x 1.5 PN 630 27 5 39 18 27 14 300 11.0 24-SDS-S8-M22B
S 10 M 14 x 1.5 PN 630 19 5 34 14.5 19 12 90 4.4 24-SDS-S10-M14B
S 10 M 16 x 1.5 PN 630 21 7 34.5 15 22 12 120 5.4 24-SDS-S10-M16B
S 10 M 18 x 1.5 PN 630 23 7 36.5 17 24 12 190 7.1 24-SDS-S10-M18B
S 10 M 22 x 1.5 PN 630 27 7 39 17.5 27 14 300 11.0 24-SDS-S10-M22B
S 12 M 14 x 1.5 PN 630 19 5 36 16.5 22 12 90 5.9 24-SDS-S12-M14B
S 12 M 16 x 1.5 PN 630 21 8 36.5 17 22 12 120 6.0 24-SDS-S12-M16B
S 12 M 18 x 1.5 PN 630 23 8 36.5 17 24 12 190 7.1 24-SDS-S12-M18B
S 12 M 22 x 1.5 PN 630 27 8 39 17.5 27 14 300 10.3 24-SDS-S12-M22B
S 12 M 27 x 2 PN 630 32 8 43 19.5 32 16 420 13.6 24-SDS-S12-M27B
S 14 M 18 x 1.5 PN 630 23 8 39 19 24 12 190 7.9 24-SDS-S14-M18B
S 14 M 20 x 1.5 PN 630 25 10 41 19 27 14 280 9.2 24-SDS-S14-M20B
S 16 M 18 x 1.5 PN 630 23 8 38.5 18 24 12 190 7.8 24-SDS-S16-M18B
S 16 M 22 x 1.5 PN 630 27 12 41 18.5 27 14 300 9.7 24-SDS-S16-M22B
S 16 M 27 x 2 PN 400 32 12 45 20.5 32 16 420 15.8 24-SDS-S16-M27B
S 20 M 18 x 1.5 PN 400 23 8 40.5 18 32 12 190 11.8 24-SDS-S20-M18B
S 20 M 22 x 1.5 PN 400 27 12 45 20.5 32 14 300 14.2 24-SDS-S20-M22B
S 20 M 27 x 2 PN 400 32 16 47 20.5 32 16 420 15.3 24-SDS-S20-M27B
S 20 M 33 x 2 PN 400 39 16 51 22.5 41 18 600 25.0 24-SDS-S20-M33B
S 25 M 27 x 2 PN 400 32 16 51 23 41 16 420 24.1 24-SDS-S25-M27B
S 25 M 33 x 2 PN 400 39 20 53 23 41 18 600 26.6 24-SDS-S25-M33B
S 30 M 33 x 2 PN 200 39 20 55 23.5 46 18 600 32.5 24-SDS-S30-M33B
S 30 M 42 x 2 PN 200 49 25 57 23.5 50 20 700 42.8 24-SDS-S30-M42B
S 38 M 48 x 2 PN 200 55 32 64 26 55 22 900 57.3 24-SDS-S38-M48B

Standard size
87
3
Male thread: Whitworth pipe thread, parallel

d1
SW1
dx
d2
d6
l
2
i
l
g
Series
Tube OD
d1
-10 %
kg/100
ca.
Order designation
L 6 G 1/8 A PN 400 14 4 23.5 8.5 14 8 25 1.4 24-SDS-L6-G1/8B
L 6 G 1/4 A PN 400 18 4 28 9 19 12 55 2.4 24-SDS-L6-G1/4B
L 6 G 3/8 A PN 400 22 4 30.5 11.5 22 12 95 4.0 24-SDS-L6-G3/8B
L 6 G 1/2 A PN 400 26 4 33 12 27 14 185 7.4 24-SDS-L6-G1/2B
L 8 G 1/8 A PN 400 14 4 24.5 9.5 17 8 25 1.8 24-SDS-L8-G1/8B
L 8 G 1/4 A PN 400 18 6 29 10 19 12 55 2.7 24-SDS-L8-G1/4B
L 8 G 3/8 A PN 400 22 6 30.5 11.5 22 12 95 4.4 24-SDS-L8-G3/8B
L 8 G 1/2 A PN 400 26 6 33 12 27 14 185 7.4 24-SDS-L8-G1/2B
L 10 G 1/8 A PN 400 14 4 25.5 10.5 17 8 25 2.1 24-SDS-L10-G1/8B
L 10 G 1/4 A PN 400 18 6 30 11 19 12 55 3.0 24-SDS-L10-G1/4B
L 10 G 3/8 A PN 400 22 7 31.5 12.5 22 12 95 4.5 24-SDS-L10-G3/8B
L 10 G 1/2 A PN 400 26 7 34 13 27 14 185 7.2 24-SDS-L10-G1/2B
L 10 G 3/4 A PN 400 32 8 37 14 32 16 230 10.4 24-SDS-L10-G3/4B
L 12 G 1/4 A PN 400 18 6 31 12 19 12 55 3.2 24-SDS-L12-G1/4B
L 12 G 3/8 A PN 400 22 9 31.5 12.5 22 12 95 4.2 24-SDS-L12-G3/8B
L 12 G 1/2 A PN 400 26 9 34 13 27 14 185 7.1 24-SDS-L12-G1/2B
L 12 G 3/4 A PN 400 32 9 37 14 32 16 230 9.0 24-SDS-L12-G3/4B
L 15 G 1/4 A PN 400 18 6 32 13 24 12 55 4.6 24-SDS-L15-G1/4B
L 15 G 3/8 A PN 400 22 9 32.5 13.5 24 12 95 5.2 24-SDS-L15-G3/8B
L 15 G 1/2 A PN 400 26 11 35 14 27 14 185 7.1 24-SDS-L15-G1/2B
L 15 G 3/4 A PN 400 32 12 38 15 32 16 250 11.7 24-SDS-L15-G3/4B
L 18 G 3/8 A PN 400 22 9 33.5 14 27 12 95 6.7 24-SDS-L18-G3/8B
L 18 G 1/2 A PN 400 26 14 36 14.5 27 14 185 7.0 24-SDS-L18-G1/2B
L 18 G 3/4 A PN 400 32 15 38 14.5 32 16 250 11.0 24-SDS-L18-G3/4B
L 18 G 1 A PN 200 39 15 41 15.5 41 18 330 20.3 24-SDS-L18-G1B
L 22 G 1/2 A PN 200 26 14 38 16.5 32 14 185 8.8 24-SDS-L22-G1/2B
L 22 G 3/4 A PN 200 32 18 40 16.5 32 16 250 10.3 24-SDS-L22-G3/4B
L 22 G 1 A PN 200 39 19 43 17.5 41 18 400 18.5 24-SDS-L22-G1B
GE06LRX
ISO 8434-1-SDS-L6xG1/8A-B-St
88

d1
SW1
dx
d2
d6
l
2
i
l
g
Series
Tube OD
d1
-10 %
kg/100
ca.
Order designation
L 28 G 1/2 A PN 200 26 14 39 17.5 41 14 185 14.3 24-SDS-L28-G1/2B
L 28 G 3/4 A PN 200 32 18 41 17.5 41 16 250 14.3 24-SDS-L28-G3/4B
L 28 G 1 A PN 200 39 23 43 17.5 41 18 400 16.9 24-SDS-L28-G1B
L 28 G 1 1/4 A PN 200 49 23 46 18.5 50 20 670 25.8 24-SDS-L28-G11/4B
L 28 G 1 1/2 A PN 200 55 24 50 20.5 55 22 800 34.6 24-SDS-L28-G11/2B
L 35 G 3/4 A PN 200 32 18 44 17.5 50 16 250 26.0 24-SDS-L35-G3/4B
L 35 G 1 A PN 200 39 23 46 17.5 50 18 400 24.1 24-SDS-L35-G1B
L 35 G 1 1/4 A PN 200 49 30 48 17.5 50 20 670 27.4 24-SDS-L35-G11/4B
L 35 G 1 1/2 A PN 200 55 30 52 19.5 55 22 800 47.2 24-SDS-L35-G11/2B
L 42 G 1 A PN 200 39 23 48 19 55 18 400 31.2 24-SDS-L42-G1B
L 42 G 1 1/4 A PN 200 49 30 50 19 55 20 670 33.1 24-SDS-L42-G11/4B
L 42 G 1 1/2 A PN 200 55 36 52 19 55 22 800 34.9 24-SDS-L42-G11/2B

S 6 G 1/4 A PN 500 18 4 32 13 19 12 95 3.5 24-SDS-S6-G1/4B
S 6 G 3/8 A PN 500 22 4 34.5 15.5 22 12 180 5.3 24-SDS-S6-G3/8B
S 6 G 1/2 A PN 500 26 4 35 14 27 14 160 6.7 24-SDS-S6-G1/2B
S 8 G 1/4 A PN 500 18 5 34 15 19 12 95 4.1 24-SDS-S8-G1/4B
S 8 G 3/8 A PN 500 22 5 34.5 15.5 22 12 180 5.5 24-SDS-S8-G3/8B
S 8 G 1/2 A PN 500 26 5 39 18 27 14 160 8.9 24-SDS-S8-G1/2B
S 10 G 1/4 A PN 500 18 5 34 14.5 19 12 95 4.2 24-SDS-S10-G1/4B
S 10 G 3/8 A PN 400 22 7 34.5 15 22 12 180 5.6 24-SDS-S10-G3/8B
S 10 G 1/2 A PN 400 26 7 35 13.5 27 14 160 7.8 24-SDS-S10-G1/2B
S 12 G 1/4 A PN 400 18 5 36 16.5 22 12 95 5.7 24-SDS-S12-G1/4B
S 12 G 3/8 A PN 400 22 8 36.5 17 22 12 180 6.2 24-SDS-S12-G3/8B
S 12 G 1/2 A PN 400 26 8 39 17.5 27 14 160 9.7 24-SDS-S12-G1/2B
S 12 G 3/4 A PN 400 32 8 43 19.5 32 16 350 14.9 24-SDS-S12-G3/4B
S 14 G 3/8 A PN 400 22 8 39 19 24 12 180 7.5 24-SDS-S14-G3/8B
S 14 G 1/2 A PN 400 26 10 41 19 27 14 160 9.8 24-SDS-S14-G1/2B
S 14 G 3/4 A PN 400 32 10 45 21 32 16 350 16.4 24-SDS-S14-G3/4B
Standard size
89
3

d1
SW1
dx
d2
d6
l
2
i
l
g
Series
Tube OD
d1
-10 %
kg/100
ca.
Order designation
S 16 G 3/8 A PN 400 22 8 38.5 18 27 12 180 8.4 24-SDS-S16-G3/8B
S 16 G 1/2 A PN 400 26 12 41 18.5 27 14 160 9.1 24-SDS-S16-G1/2B
S 16 G 3/4 A PN 400 32 12 45 20.5 32 16 350 15.5 24-SDS-S16-G3/4B
S 16 G 1 A PN 400 39 12 49 22.5 41 18 700 25.4 24-SDS-S16-G1B
S 20 G 1/2 A PN 200 26 12 45 20.5 32 14 160 13.3 24-SDS-S20-G1/2B
S 20 G 3/4 A PN 200 32 16 47 20.5 32 16 350 15.1 24-SDS-S20-G3/4B
S 20 G 1 A PN 200 39 16 51 22.5 41 18 700 27.5 24-SDS-S20-G1B
S 25 G 3/4 A PN 200 32 16 51 23 41 16 350 24.1 24-SDS-S25-G3/4B
S 25 G 1 A PN 200 39 20 53 23 41 18 700 26.6 24-SDS-S25-G1B
S 25 G 1 1/4 A PN 200 49 20 55 23 50 20 850 44.0 24-SDS-S25-G11/4B
S 25 G 1 1/2 A PN 200 55 20 60 26 55 22 1000 53.9 24-SDS-S25-G11/2B
S 30 G 3/4 A PN 200 32 16 53 23.5 46 16 350 29.9 24-SDS-S30-G3/4B
S 30 G 1 A PN 200 39 20 55 23.5 46 18 700 32.8 24-SDS-S30-G1B
S 30 G 1 1/4 A PN 200 49 25 57 23.5 50 20 850 41.7 24-SDS-S30-G11/4B
S 30 G 1 1/2 A PN 200 55 25 62 26.5 55 22 1000 64.5 24-SDS-S30-G11/2B
S 38 G 1 A PN 200 39 20 60 26 55 18 700 49.2 24-SDS-S38-G1B
S 38 G 1 1/4 A PN 200 49 25 62 26 55 20 850 55.0 24-SDS-S38-G11/4B
S 38 G 1 1/2 A PN 200 55 32 64 26 55 22 1000 56.6 24-SDS-S38-G11/2B

Standard size
90
Sealing with PEFLEX profile seal ring
Standard profile seal ring material is NBR

d1
SW1
dx
d2
d7
l
2
i
l
g
Series
Tube OD
d1
-10 %
kg/100
ca.
Order designation
L 6 M 10 x 1 PN 500 13.9 4 23.5 8.5 14 8 15 1.4 24-SDS-L6-M10E
L 6 M 12 x 1 PN 500 16.9 4 27 10 17 10 25 2.8 24-SDS-L6-M12x1E
L 6 M 12 x 1.5 PN 500 16.9 4 29 10 17 12 25 2.3 24-SDS-L6-M12E
L 6 M 14 x 1.5 PN 500 18.9 4 29 10 19 12 50 3.4 24-SDS-L6-M14E
L 6 M 16 x 1.5 PN 400 21.9 4 30.5 11.5 22 12 70 3.4 24-SDS-L6-M16E
L 6 M 18 x 1.5 PN 400 23.9 4 30.5 11.5 24 12 90 3.6 24-SDS-L6-M18E
L 8 M 10 x 1 PN 500 13.9 4 24.5 9.5 14 8 15 1.6 24-SDS-L8-M10E
L 8 M 12 x 1.5 PN 500 16.9 6 29 10 17 12 25 2.1 24-SDS-L8-M12E
L 8 M 14 x 1.5 PN 500 18.9 6 29 10 19 12 50 2.8 24-SDS-L8-M14E
L 8 M 16 x 1.5 PN 400 21.9 6 30.5 11.5 22 12 70 4.1 24-SDS-L8-M16E
L 8 M 18 x 1.5 PN 400 23.9 6 30.5 11.5 24 12 90 5.0 24-SDS-L8-M18E
L 8 M 22 x 1.5 PN 400 26.9 6 34 13 27 14 130 5.5 24-SDS-L8-M22E
L 10 M 10 x 1 PN 500 13.9 4 25.5 11.5 17 8 15 2.3 24-SDS-L10-M10E
L 10 M 12 x 1 PN 500 16.9 6 28 11 17 10 25 2.6 24-SDS-L10-M12x1E
L 10 M 12 x 1.5 PN 500 16.9 6 30 11 17 12 25 2.4 24-SDS-L10-M12E
L 10 M 14 x 1.5 PN 500 18.9 7 30 11 19 12 50 2.9 24-SDS-L10-M14E
L 10 M 16 x 1.5 PN 400 21.9 7 31.5 12.5 22 12 70 4.2 24-SDS-L10-M16E
L 10 M 18 x 1.5 PN 400 23.9 8 31.5 12.5 24 12 90 4.9 24-SDS-L10-M18E
L 10 M 22 x 1.5 PN 400 26.9 8 35 14 27 14 130 8.0 24-SDS-L10-M22E
L 12 M 10 x 1 PN 400 13.9 4 27 12 19 8 15 2.7 24-SDS-L12-M10E
L 12 M 12 x 1.5 PN 400 16.9 6 31.5 12.5 19 12 25 3.0 24-SDS-L12-M12E
L 12 M 14 x 1.5 PN 400 18.9 7 30 11 19 12 50 2.9 24-SDS-L12-M14E
L 12 M 16 x 1.5 PN 400 21.9 9 31.5 12.5 22 12 70 3.9 24-SDS-L12-M16E
L 12 M 18 x 1.5 PN 400 23.9 9 31.5 12.5 24 12 90 4.4 24-SDS-L12-M18E
L 12 M 22 x 1.5 PN 400 26.9 9 35 14 27 14 130 6.4 24-SDS-L12-M22E
L 12 M 26 x 1.5 PN 250 31.9 10 37 14 32 16 180 10.0 24-SDS-L12-M26E
L 15 M 12 x 1.5 PN 400 16.9 6 32 13 24 12 25 4.8 24-SDS-L15-M12E
L 15 M 16 x 1.5 PN 400 21.9 9 32 13 24 12 70 4.8 24-SDS-L15-M16E
L 15 M 18 x 1.5 PN 400 23.9 11 32.5 13.5 24 12 90 5.1 24-SDS-L15-M18E
L 15 M 22 x 1.5 PN 400 26.9 12 36 15 27 14 130 7.1 24-SDS-L15-M22E
L 15 M 26 x 1.5 PN 250 31.9 12 38 15 32 16 180 11.3 24-SDS-L15-M26E
GE06LMEDOMD
ISO 8434-1-SDS-L6xM10x1-E-St
91
3

d1
SW1
dx
d2
d7
l
2
i
l
g
Series
Tube OD
d1
-10 %
kg/100
ca.
Order designation
L 18 M 18 x 1.5 PN 400 23.9 11 33.5 14 27 12 90 6.5 24-SDS-L18-M18E
L 18 M 22 x 1.5 PN 400 26.9 14 36 14.5 27 14 130 7.4 24-SDS-L18-M22E
L 18 M 26 x 1.5 PN 250 31.9 15 38 14.5 32 16 180 9.4 24-SDS-L18-M26E
L 18 M 27 x 2 PN 250 31.9 15 43 19.5 32 16 180 14.8 24-SDS-L18-M27E
L 18 M 33 x 2 PN 250 39.9 15 41 16.5 41 18 230 16.0 24-SDS-L18-M33E
L 22 M 18 x 1.5 PN 250 23.9 11 35.5 16 32 12 90 9.0 24-SDS-L22-M18E
L 22 M 22 x 1.5 PN 250 26.9 14 38 16.5 32 14 130 9.0 24-SDS-L22-M22E
L 22 M 26 x 1.5 PN 250 31.9 18 40 16.5 32 16 180 10.1 24-SDS-L22-M26E
L 22 M 27 x 2 PN 250 31.9 18 40 16.5 32 16 180 10.8 24-SDS-L22-M27E
L 22 M 33 x 2 PN 250 39.9 19 43 17.5 41 18 230 18.6 24-SDS-L22-M33E
L 28 M 18 x 1.5 PN 250 23.9 11 36.5 17 41 12 90 12.9 24-SDS-L28-M18E
L 28 M 22 x 1.5 PN 250 26.9 14 39 17.5 41 14 130 13.7 24-SDS-L28-M22E
L 28 M 26 x 1.5 PN 250 31.9 18 43 19.5 41 16 180 16.2 24-SDS-L28-M26E
L 28 M 33 x 2 PN 250 39.9 23 43 17.5 41 18 230 16.4 24-SDS-L28-M33E
L 28 M 42 x 2 PN 250 49.9 23 47 19.5 50 20 330 32.2 24-SDS-L28-M42E
L 35 M 33 x 2 PN 250 39.9 23 46 17.5 46 18 230 21.7 24-SDS-L35-M33E
L 35 M 42 x 2 PN 250 49.9 30 48 17.5 50 20 330 27.3 24-SDS-L35-M42E
L 42 M 42 x 2 PN 250 49.9 30 50 19 55 20 330 33.6 24-SDS-L42-M42E
L 42 M 48 x 2 PN 250 54.9 36 52 19 55 22 500 34.6 24-SDS-L42-M48E

Standard size
92

d1
SW1
dx
d2
d7
l
2
i
l
g
Series
Tube OD
d1
-10 %
kg/100
ca.
Order designation
S 6 M 12 x 1.5 PN 800 16.9 4 32 13 17 12 50 2.9 24-SDS-S6-M12E
S 8 M 12 x 1.5 PN 800 16.9 4 34 15 17 12 50 3.8 24-SDS-S8-M12E
S 8 M 14 x 1.5 PN 800 18.9 5 34 15 19 12 60 4.1 24-SDS-S8-M14E
S 8 M 18 x 1.5 PN 630 23.9 5 36.5 17.5 24 12 90 6.5 24-SDS-S8-M18E
S 8 M 22 x 1.5 PN 630 26.9 5 41 20 27 14 130 10.4 24-SDS-S8-M22E
S 10 M 12 x 1.5 PN 800 16.9 4 34.5 15 19 12 50 4.5 24-SDS-S10-M12E
S 10 M 16 x 1.5 PN 800 21.9 7 34.5 15 22 12 80 5.3 24-SDS-S10-M16E
S 10 M 18 x 1.5 PN 630 23.9 7 36.5 17 24 12 90 7.6 24-SDS-S10-M18E
S 12 M 12 x 1.5 PN 800 16.9 4 36 16.5 22 12 50 5.2 24-SDS-S12-M12E
S 12 M 14 x 1.5 PN 800 18.9 5 36 16.5 22 12 60 6.2 24-SDS-S12-M14E
S 12 M 16 x 1.5 PN 800 21.9 7 36 16.5 22 12 80 6.9 24-SDS-S12-M16E
S 12 M 18 x 1.5 PN 630 23.9 8 36.5 17 24 12 90 7.1 24-SDS-S12-M18E
S 12 M 20 x 1.5 PN 630 25.9 8 39 17.5 27 14 130 10.0 24-SDS-S12-M20E
S 12 M 22 x 1.5 PN 630 26.9 8 39 17.5 27 14 130 10.2 24-SDS-S12-M22E
S 14 M 18 x 1.5 PN 630 23.9 8 39 19 24 12 90 7.7 24-SDS-S14-M18E
S 14 M 20 x 1.5 PN 630 25.9 10 41 19 27 14 130 9.4 24-SDS-S14-M20E
S 16 M 16 x 1.5 PN 800 21.9 7 39 18.5 27 12 50 8.4 24-SDS-S16-M16E
S 16 M 18 x 1.5 PN 630 23.9 10 38.5 18 27 12 90 8.1 24-SDS-S16-M18E
S 16 M 22 x 1.5 PN 630 26.9 12 41 18.5 27 14 130 9.6 24-SDS-S16-M22E
S 16 M 27 x 2 PN 420 31.9 12 45 20.5 32 16 200 15.7 24-SDS-S16-M27E
S 20 M 22 x 1.5 PN 420 26.9 12 45 20.5 32 14 130 13.9 24-SDS-S20-M22E
S 20 M 26 x 1.5 PN 420 31.9 16 47 20.5 32 16 190 16.3 24-SDS-S20-M26E
S 20 M 27 x 2 PN 420 31.9 16 47 20.5 32 16 200 15.1 24-SDS-S20-M27E
S 25 M 26 x 1.5 PN 800 31.9 16 51 23 41 16 50 25.0 24-SDS-S25-M26E
S 25 M 27 x 2 PN 420 31.9 16 51 23 41 16 200 23.7 24-SDS-S25-M27E
S 25 M 33 x 2 PN 420 39.9 20 53 23 41 18 250 26.5 24-SDS-S25-M33E
S 30 M 33 x 2 PN 420 39.9 25 55 23.5 46 18 250 34.9 24-SDS-S30-M33E
S 30 M 42 x 2 PN 420 49.9 25 57 23.5 50 20 500 41.7 24-SDS-S30-M42E
S 38 M 48 x 2 PN 420 54.9 32 64 26 55 22 600 56.4 24-SDS-S38-M48E

Standard size
93
3

d1
SW1
dx
d2
d7
l
2
i
l
g
Series
Tube OD
d1
-10 %
kg/100
ca.
Order designation
L 6 G 1/8 A PN 500 13.9 4 23.5 8.5 14 8 20 1.3 24-SDS-L6-G1/8E
L 6 G 1/4 A PN 500 18.9 4 29 10 19 12 50 2.7 24-SDS-L6-G1/4E
L 6 G 3/8 A PN 400 21.9 4 30.5 11.5 22 12 80 3.8 24-SDS-L6-G3/8E
L 8 G 1/8 A PN 500 13.9 4 24.5 9.5 14 8 20 1.5 24-SDS-L8-G1/8E
L 8 G 1/4 A PN 500 18.9 6 29 10 19 12 50 2.7 24-SDS-L8-G1/4E
L 8 G 3/8 A PN 400 21.9 6 30.5 11.5 22 12 80 4.4 24-SDS-L8-G3/8E
L 8 G 1/2 A PN 400 26.9 6 33 12 27 14 100 7.2 24-SDS-L8-G1/2E
L 8 G 3/4 A PN 250 31.9 6 36 13 32 16 180 10.0 24-SDS-L8-G3/4E
L 10 G 1/8 A PN 500 13.9 4 25.5 10.5 17 8 20 2.0 24-SDS-L10-G1/8E
L 10 G 1/4 A PN 500 18.9 6 30 11 19 12 50 2.9 24-SDS-L10-G1/4E
L 10 G 3/8 A PN 400 21.9 8 31.5 12.5 22 12 80 4.2 24-SDS-L10-G3/8E
L 10 G 1/2 A PN 400 26.9 8 34 13 27 14 100 6.3 24-SDS-L10-G1/2E
L 12 G 1/4 A PN 400 18.9 6 31.5 12.5 19 12 50 3.2 24-SDS-L12-G1/4E
L 12 G 3/8 A PN 400 21.9 9 31.5 12.5 22 12 80 4.2 24-SDS-L12-G3/8E
L 12 G 1/2 A PN 400 26.9 10 34 13 27 14 100 6.7 24-SDS-L12-G1/2E
L 12 G 3/4 A PN 250 31.9 10 37 14 32 16 180 11.7 24-SDS-L12-G3/4E
L 15 G 1/4 A PN 400 18.9 6 32 13 24 12 50 3.9 24-SDS-L15-G1/4E
L 15 G 3/8 A PN 400 21.9 9 32.5 13.5 24 12 80 5.1 24-SDS-L15-G3/8E
L 15 G 1/2 A PN 400 26.9 11 35 14 27 14 100 7.1 24-SDS-L15-G1/2E
L 15 G 3/4 A PN 250 31.9 12 38 15 32 16 180 11.7 24-SDS-L15-G3/4E
L 15 G 1 A PN 250 39.9 11 41 16 41 18 230 22.8 24-SDS-L15-G1E
L 18 G 3/8 A PN 400 21.9 9 33.5 14 27 12 80 6.6 24-SDS-L18-G3/8E
L 18 G 1/2 A PN 400 26.9 14 36 14.5 27 14 100 7.0 24-SDS-L18-G1/2E
L 18 G 3/4 A PN 250 31.9 15 38 14.5 32 16 180 10.9 24-SDS-L18-G3/4E
L 18 G 1 A PN 250 39.9 15 41 15.5 41 18 230 16.7 24-SDS-L18-G1E
L 18 G 1 1/4 A PN 250 49.9 15 44 16.5 50 20 330 37.9 24-SDS-L18-G11/4E
L 22 G 1/2 A PN 250 26.9 14 38 16.5 32 14 100 8.7 24-SDS-L22-G1/2E
L 22 G 3/4 A PN 250 31.9 18 40 16.5 32 16 180 10.2 24-SDS-L22-G3/4E
L 22 G 1 A PN 250 39.9 19 43 17.5 41 18 230 18.4 24-SDS-L22-G1E
L 22 G 1 1/4 A PN 250 49.9 19 46 18.5 50 20 330 37.5 24-SDS-L22-G11/4E
GE06LREDOMD
ISO 8434-1-SDS-L6xG1/8A-E-St
94

d1
SW1
dx
d2
d7
l
2
i
l
g
Series
Tube OD
d1
-10 %
kg/100
ca.
Order designation
L 28 G 3/4 A PN 250 31.9 18 41 17.5 41 16 180 14.6 24-SDS-L28-G3/4E
L 28 G 1 A PN 250 39.9 23 43 17.5 41 18 230 16.5 24-SDS-L28-G1E
L 28 G 1 1/4 A PN 250 49.9 23 46 18.5 50 20 330 25.2 24-SDS-L28-G11/4E
L 35 G 1 A PN 250 39.9 23 46 17.5 50 18 230 23.8 24-SDS-L35-G1E
L 35 G 1 1/4 A PN 250 49.9 30 48 17.5 50 20 330 27.1 24-SDS-L35-G11/4E
L 35 G 1 1/2 A PN 250 54.9 30 52 19.5 55 22 500 37.4 24-SDS-L35-G11/2E
L 42 G 1 1/4 A PN 250 49.9 30 50 19 55 20 330 33.6 24-SDS-L42-G11/4E
L 42 G 1 1/2 A PN 250 54.9 36 52 19 55 22 500 34.3 24-SDS-L42-G11/2E

S 6 G 1/4 A PN 800 18.9 4 32 13 19 12 60 3.5 24-SDS-S6-G1/4E
S 6 G 3/8 A PN 800 21.9 4 34.5 15.5 22 12 90 6.0 24-SDS-S6-G3/8E
S 6 G 1/2 A PN 630 26.9 4 39 18 27 14 150 8.6 24-SDS-S6-G1/2E
S 8 G 1/4 A PN 800 18.9 5 34 15 19 12 60 4.1 24-SDS-S8-G1/4E
S 8 G 3/8 A PN 800 21.9 5 34.5 15.5 22 12 90 5.7 24-SDS-S8-G3/8E
S 8 G 1/2 A PN 630 26.9 5 39 18 27 14 150 9.5 24-SDS-S8-G1/2E
S 10 G 1/4 A PN 800 18.9 5 34 14.5 19 12 60 4.2 24-SDS-S10-G1/4E
S 10 G 3/8 A PN 800 21.9 7 34.5 15 22 12 90 5.5 24-SDS-S10-G3/8E
S 10 G 1/2 A PN 630 26.9 7 39 17.5 27 14 150 8.9 24-SDS-S10-G1/2E
S 12 G 1/4 A PN 630 18.9 5 36 16.5 22 12 60 5.6 24-SDS-S12-G1/4E
S 12 G 3/8 A PN 630 21.9 8 36.5 17 22 12 90 6.2 24-SDS-S12-G3/8E
S 12 G 1/2 A PN 630 26.9 8 39 17.5 27 14 150 9.1 24-SDS-S12-G1/2E
S 12 G 3/4 A PN 420 31.9 8 43 19.5 32 16 200 13.4 24-SDS-S12-G3/4E
S 14 G 3/8 A PN 800 21.9 8 39 19 24 12 90 8.3 24-SDS-S14-G3/8E
S 14 G 1/2 A PN 630 26.9 10 41 19 27 14 150 9.6 24-SDS-S14-G1/2E
S 16 G 1/4 A PN 630 18.9 5 38 17.5 27 12 60 8.4 24-SDS-S16-G1/4E
S 16 G 3/8 A PN 630 21.9 8 38.5 18 27 12 90 8.1 24-SDS-S16-G3/8E
S 16 G 1/2 A PN 630 26.9 12 41 18.5 27 14 150 9.2 24-SDS-S16-G1/2E
S 16 G 3/4 A PN 420 31.9 12 45 20.5 32 16 200 13.8 24-SDS-S16-G3/4E
S 16 G 1 A PN 420 39.9 12 49 22.5 41 18 250 23.7 24-SDS-S16-G1E
Standard size
95
3

d1
SW1
dx
d2
d7
l
2
i
l
g
Series
Tube OD
d1
-10 %
kg/100
ca.
Order designation
S 20 G 1/2 A PN 420 26.9 12 45 20.5 32 14 150 13.5 24-SDS-S20-G1/2E
S 20 G 3/4 A PN 420 31.9 16 47 20.5 32 16 200 14.9 24-SDS-S20-G3/4E
S 20 G 1 A PN 420 39.9 16 51 22.5 41 18 250 25.0 24-SDS-S20-G1E
S 25 G 1/2 A PN 420 26.9 12 49 23 41 14 150 23.9 24-SDS-S25-G1/2E
S 25 G 3/4 A PN 420 31.9 16 51 23 41 16 200 23.7 24-SDS-S25-G3/4E
S 25 G 1 A PN 420 39.9 20 53 23 41 18 250 26.3 24-SDS-S25-G1E
S 25 G 1 1/4 A PN 420 49.9 20 55 23 50 20 500 46.7 24-SDS-S25-G11/4E
S 30 G 3/4 A PN 420 31.9 16 53 23.5 46 16 200 31.7 24-SDS-S30-G3/4E
S 30 G 1 A PN 420 39.9 20 55 23.5 46 18 250 33.0 24-SDS-S30-G1E
S 30 G 1 1/4 A PN 420 49.9 25 57 23.5 50 20 500 41.9 24-SDS-S30-G11/4E
S 30 G 1 1/2 A PN 420 54.9 25 62 26.5 55 22 600 64.0 24-SDS-S30-G11/2E
S 38 G 3/4 A PN 420 31.9 16 58 26 55 16 200 50.1 24-SDS-S38-G3/4E
S 38 G 1 A PN 420 39.9 20 60 26 55 18 250 44.9 24-SDS-S38-G1E
S 38 G 1 1/4 A PN 420 49.9 25 62 26 55 20 500 55.5 24-SDS-S38-G11/4E
S 38 G 1 1/2 A PN 420 54.9 32 64 26 55 22 600 55.9 24-SDS-S38-G11/2E

Standard size
96
Male thread: UN/UNF
Sealing with O-ring

d1
SW1
l
g
l
2
i
dx
d2
d8
Series
Tube OD
d1
-10 %
kg/100
ca.
Order designation
L 6 7/16-20 UNF-2A PN 500 15.8 4 25.2 9 17 9.2 25 1.9 24-SDS-L6-U7/16-20F
L 6 9/16-18 UNF-2A PN 500 17.7 4 27 15 32 15 30 2.5 24-SDS-L6-U9/16-18F
L 8 7/16-20 UNF-2A PN 500 15.8 5 26.2 10 17 9.2 25 2.1 24-SDS-L8-U7/16-20F
L 8 1/2-20 UNF-2A PN 500 16.2 6 26.2 10 17 9.2 28 2.2 24-SDS-L8-U1/2-20F
L 8 9/16-18 UNF-2A PN 500 17.7 6 27 10 19 10 30 2.8 24-SDS-L8-U9/16-18F
L 8 3/4-16 UNF-2A PN 400 23 6 30 11.8 24 11.2 55 4.3 24-SDS-L8-U3/4-16F
L 10 7/16-20 UNF-2A PN 500 15.8 5 28.2 12 17 9.2 25 2.4 24-SDS-L10-U7/16-20F
L 10 9/16-18 UNF-2A PN 500 17.7 7 28 11 19 10 30 2.8 24-SDS-L10-U9/16-18F
L 10 3/4-16 UNF-2A PN 400 23 8 31 12.8 24 11.2 55 4.4 24-SDS-L10-U3/4-16F
L 10 7/8-14 UNF-2A PN 400 27 7 32.5 12.8 27 12.7 60 7.6 24-SDS-L10-U7/8-14F
L 12 7/16-20 UNF-2A PN 400 17.7 5 28.5 12.3 19 9.2 25 2.6 24-SDS-L12-U7/16-20F
L 12 1/2-20 UNF-2A PN 400 16.8 6 28.5 12.3 19 9.2 28 3.0 24-SDS-L12-U1/2-20F
L 12 9/16-18 UNF-2A PN 400 17.7 7 29.5 12.5 19 10 30 3.2 24-SDS-L12-U9/16-18F
L 12 3/4-16 UNF-2A PN 400 23 9 30.7 12.5 24 11.2 55 4.5 24-SDS-L12-U3/4-16F
L 12 7/8-14 UNF-2A PN 400 27 10 32.7 13 27 12.7 60 7.0 24-SDS-L12-U7/8-14F
L 15 9/16-18 UNF-2A PN 400 17.7 7 31 14 24 10 30 4.8 24-SDS-L15-U9/16-18F
L 15 3/4-16 UNF-2A PN 400 23 11 32.2 14 24 11.2 55 5.4 24-SDS-L15-U3/4-16F
L 15 7/8-14 UNF-2A PN 400 27 11 33.7 14 27 12.7 60 7.5 24-SDS-L15-U7/8-14F
L 15 1 1/16-12 UN-2A PN 400 32 12 37 15 32 15 110 11.7 24-SDS-L15-U11/16-12F
L 15 1 5/16-12 UN-2A PN 250 38.1 12 37 15 41 15 165 18.7 24-SDS-L15-U15/16-12F
L 18 3/4-16 UNF-2A PN 400 23 12 33.2 14.5 27 11.2 55 6.6 24-SDS-L18-U3/4-16F
L 18 7/8-14 UNF-2A PN 400 27 14 34.7 14.5 27 12.7 60 7.4 24-SDS-L18-U7/8-14F
L 18 1 1/16-12 UN-2A PN 400 32 15 37 14.5 32 15 110 9.6 24-SDS-L18-U11/16-12F
L 18 1 5/16-12 UN-2A PN 250 38.1 15 37 14.5 41 15 165 18.3 24-SDS-L18-U15/16-12F
L 22 7/8-14 UNF-2A PN 250 27 12 36.7 16.5 32 12.7 60 9.8 24-SDS-L22-U7/8-14F
L 22 1 1/16-12 UN-2A PN 250 32 18 39 16.5 32 15 110 10.2 24-SDS-L22-U11/16-12F
L 22 1 5/16-12 UN-2A PN 250 38.1 18 39 16.5 41 15 165 17.3 24-SDS-L22-U15/16-12F
L 22 1 5/8-12 UN-2A PN 250 48 19 40 17.5 50 15 200 28.7 24-SDS-L22-U15/8-12F
Example for comp. :
GE06L7/16UNFOMD
97
3
Male thread: UN/UNF
Sealing with O-ring

d1
SW1
l
g
l
2
i
dx
d2
d8
Series
Tube OD
d1
-10 %
kg/100
ca.
Order designation
L 28 7/8-14 UNF-2A PN 250 27 12 37.7 17.5 41 12.7 60 13.7 24-SDS-L28-U7/8-14F
L 28 1 1/16-12 UN-2A PN 250 32 18 40 17.5 41 15 110 14.3 24-SDS-L28-U11/16-12F
L 28 1 5/16-12 UN-2A PN 250 38.1 23 40 17.5 41 15 165 16.2 24-SDS-L28-U15/16-12F
L 28 1 5/8-12 UN-2A PN 250 48 24 40 17.5 50 15 220 26.4 24-SDS-L28-U15/8-12F
L 35 1 3/16-12 UN-2A PN 250 35 20 43 17.5 46 15 140 20.3 24-SDS-L35-U13/16-12F
L 35 1 5/16-12 UN-2A PN 250 39 23 43 17.5 46 15 165 21.1 24-SDS-L35-U15/16-12F
L 35 1 5/8-12 UN-2A PN 250 48 30 43 17.5 50 15 220 24.9 24-SDS-L35-U15/8-12F
L 35 1 7/8-12 UN-2A PN 250 54 30 45 19.5 55 15 260 31.2 24-SDS-L35-U17/8-12F
L 42 1 5/8-12 UN-2A PN 250 48 30 45 19 55 15 220 30.8 24-SDS-L42-U15/8-12F
L 42 1 7/8-12 UN-2A PN 250 54 36 45 19 55 15 260 31.6 24-SDS-L42-U17/8-12F

S 6 7/16-20 UNF-2A PN 800 15.8 4 29.2 13 17 9.2 30 2.7 24-SDS-S6-U7/16-20F
S 8 7/16-20 UNF-2A PN 800 15.8 4 31.2 15 17 9.2 30 3.2 24-SDS-S8-U7/16-20F
S 8 1/2-20 UNF-2A PN 800 16.2 5 31.2 15 17 9.2 45 3.4 24-SDS-S8-U1/2-20F
S 8 9/16-18 UNF-2A PN 800 17.7 5 32 15 19 10 75 4.5 24-SDS-S8-U9/16-18F
S 10 9/16-18 UNF-2A PN 800 17.7 7 32.5 15 19 10 75 4.1 24-SDS-S10-U9/16-18F
S 10 3/4-16 UNF-2A PN 800 23 7 33.7 15 24 11.2 100 6.6 24-SDS-S10-U3/4-16F
S 12 9/16-18 UNF-2A PN 800 17.7 7 34.5 17.5 22 10 75 5.5 24-SDS-S12-U9/16-18F
S 12 3/4-16 UNF-2A PN 630 23 8 36.2 17.5 24 11.2 100 7.4 24-SDS-S12-U3/4-16F
S 12 7/8-14 UNF-2A PN 630 27 8 36.7 16.5 27 12.7 160 9.7 24-SDS-S12-U7/8-14F
S 14 9/16-18 UNF-2A PN 630 17.7 7 37 19 24 10 75 6.8 24-SDS-S14-U9/16-18F
S 14 3/4-16 UNF-2A PN 630 23 10 38.2 19 24 11.2 100 7.6 24-SDS-S14-U3/4-16F
S 16 3/4-16 UNF-2A PN 630 23 12 38.2 18.5 27 11.2 100 8.1 24-SDS-S16-U3/4-16F
S 16 7/8-14 UNF-2A PN 630 27 12 37.5 15 30 14 160 8.7 24-SDS-S16-U7/8-14F
S 16 1 1/16-12 UN-2A PN 630 32 12 42 18.5 32 15 270 14.4 24-SDS-S16-U11/16-12F
S 20 3/4-16 UNF-2A PN 420 23 10 42.2 20.5 32 11.2 100 12.7 24-SDS-S20-U3/4-16F
S 20 7/8-14 UNF-2A PN 420 27 12 43.7 20.5 32 12.7 160 13.8 24-SDS-S20-U7/8-14F
S 20 1 1/16-12 UN-2A PN 420 32 16 46 20.5 32 15 270 15.0 24-SDS-S20-U11/16-12F
S 20 1 5/16-12 UN-2A PN 420 38.1 16 48 22.5 41 15 270 25.0 24-SDS-S20-U15/16-12F
S 20 1 5/8-12 UN-2A PN 420 48 16 48 22.5 50 15 450 36.5 24-SDS-S20-U15/8-12F
98
Male thread: UN/UNF
Sealing with O-ring

d1
SW1
l
g
l
2
i
dx
d2
d8
Series
Tube OD
d1
-10 %
kg/100
ca.
Order designation
S 25 1 1/16-12 UN-2A PN 420 32 16 50 23 41 15 270 23.5 24-SDS-S25-U11/16-12F
S 25 1 5/16-12 UN-2A PN 420 38.1 20 50 23 41 15 270 25.7 24-SDS-S25-U15/16-12F
S 30 1 1/16-12 UN-2A PN 420 32 16 52 23.5 46 15 270 30.1 24-SDS-S30-U11/16-12F
S 30 1 5/16-12 UN-2A PN 420 38.1 22 52 23.5 46 15 430 30.7 24-SDS-S30-U15/16-12F
S 30 1 5/8-12 UN-2A PN 420 48 25 52 23.5 50 15 450 38.1 24-SDS-S30-U15/8-12F
S 38 1 5/8-12 UN-2A PN 315 48 32 57 26 55 15 450 51.6 24-SDS-S38-U15/8-12F
S 38 1 7/8-12 UN-2A PN 315 54 32 57 26 55 15 520 51.9 24-SDS-S38-U17/8-12F

99
3
ISO 6149
Sealing with O-ring

d1
SW1
d2
dx
d8
l
g
l
2
i
Series
Tube OD
d1
-10 %
kg/100
ca.
Order designation
L 6 M 10 x 1 PN 500 13.8 4 25 9.5 14 8.5 15 1.5 24-SDS-L6-M10F
L 6 M 14 x 1.5 PN 500 18.8 4 28 10 19 11 35 2.6 24-SDS-L6-M14F
L 8 M 10 x 1 PN 500 13.8 4 25.5 10 17 8.5 15 2.1 24-SDS-L8-M10F
L 8 M 12 x 1.5 PN 500 16.8 6 28 10 17 11 25 2.2 24-SDS-L8-M12F
L 8 M 14 x 1.5 PN 500 18.8 6 28 10 19 11 35 3.1 24-SDS-L8-M14F
L 8 M 18 x 1.5 PN 400 23.8 6 31 11.5 24 12.5 45 5.1 24-SDS-L8-M18F
L 10 M 10 x 1 PN 500 13.8 4 26.5 11 17 8.5 15 2.3 24-SDS-L10-M10F
L 10 M 12 x 1.5 PN 500 16.8 6 29 11 17 11 25 2.4 24-SDS-L10-M12F
L 10 M 14 x 1.5 PN 500 18.8 7 29 11 19 11 35 2.9 24-SDS-L10-M14F
L 10 M 16 x 1.5 PN 400 21.8 8 31 12.5 22 11.5 40 4.0 24-SDS-L10-M16F
L 10 M 18 x 1.5 PN 400 23.8 8 32 12.5 24 12.5 45 5.2 24-SDS-L10-M18F
L 10 M 22 x 1.5 PN 400 26.8 7 34 14 27 13 60 6.6 24-SDS-L10-M22F
L 12 M 12 x 1.5 PN 400 16.8 6 30.5 12.5 19 11 25 3.0 24-SDS-L12-M12F
L 12 M 14 x 1.5 PN 400 18.8 7 31 13 19 11 35 3.2 24-SDS-L12-M14F
L 12 M 16 x 1.5 PN 400 21.8 9 31 12.5 22 11.5 40 4.0 24-SDS-L12-M16F
L 12 M 18 x 1.5 PN 400 23.8 9 32 12.5 24 12.5 45 5.1 24-SDS-L12-M18F
L 12 M 22 x 1.5 PN 400 26.8 10 34 14 27 13 60 7.6 24-SDS-L12-M22F
L 15 M 14 x 1.5 PN 400 18.8 7 31.5 13.5 24 11 35 4.8 24-SDS-L15-M14F
L 15 M 16 x 1.5 PN 400 21.8 9 32.5 14 22 11.5 40 5.4 24-SDS-L15-M16F
L 15 M 18 x 1.5 PN 400 23.8 11 33 13.5 24 12.5 45 5.2 24-SDS-L15-M18F
L 15 M 22 x 1.5 PN 400 26.8 12 35 15 27 13 60 7.7 24-SDS-L15-M22F
L 18 M 18 x 1.5 PN 400 23.8 11 34.5 14.5 27 12.5 45 7.6 24-SDS-L18-M18F
L 18 M 22 x 1.5 PN 400 26.8 14 35 14.5 27 13 60 7.5 24-SDS-L18-M22F
L 22 M 22 x 1.5 PN 400 26.8 14 37 16.5 32 13 60 11.3 24-SDS-L22-M22F
L 22 M 27 x 2 PN 250 31.8 18 40 16.5 32 16 100 10.5 24-SDS-L22-M27F
L 22 M 33 x 2 PN 250 40.8 19 41 17.5 41 16 160 18.4 24-SDS-L22-M33F
L 22 M 42 x 2 PN 250 49.8 19 42 18.5 50 16 210 25.7 24-SDS-L22-M42F
L 28 M 27 x 2 PN 250 31.8 18 40 16.5 36 16 100 13.6 24-SDS-L28-M27F
L 28 M 33 x 2 PN 250 40.8 23 41 17.5 41 16 160 16.4 24-SDS-L28-M33F
GEO06LMOMD
ISO 8434-1-SDS-L6xM10x1-F-St
100
ISO 6149
Sealing with O-ring

d1
SW1
d2
dx
d8
l
g
l
2
i
Series
Tube OD
d1
-10 %
kg/100
ca.
Order designation
L 35 M 33 x 2 PN 250 40.8 23 44 17.5 46 16 160 25.9 24-SDS-L35-M33F
L 35 M 42 x 2 PN 250 49.8 30 44 17.5 50 16 210 26.5 24-SDS-L35-M42F
L 35 M 48 x 2 PN 250 54.8 30 47.5 19.5 55 17.5 260 36.1 24-SDS-L35-M48F
L 42 M 42 x 2 PN 250 49.8 30 46 19 55 16 210 37.4 24-SDS-L42-M42F
L 42 M 48 x 2 PN 250 54.8 36 47.5 19 55 17.5 260 33.0 24-SDS-L42-M48F

S 6 M 12 x 1.5 PN 800 16.8 4 31 13 17 11 35 2.9 24-SDS-S6-M12F
S 8 M 10 x 1 PN 800 13.8 3 29.5 13 17 9.5 15 3.2 24-SDS-S8-M10F
S 8 M 12 x 1.5 PN 800 16.8 4 33 15 17 11 35 3.9 24-SDS-S8-M12F
S 8 M 14 x 1.5 PN 800 18.8 5 33 15 19 11 40 4.1 24-SDS-S8-M14F
S 10 M 16 x 1.5 PN 800 21.8 7 35 15 22 12.5 55 5.5 24-SDS-S10-M16F
S 12 M 14 x 1.5 PN 630 18.8 5 35.5 17 22 11 40 5.9 24-SDS-S12-M14F
S 12 M 16 x 1.5 PN 630 21.8 7 35.5 15.5 22 12.5 55 6.0 24-SDS-S12-M16F
S 12 M 18 x 1.5 PN 630 23.8 8 38.5 17 24 14 70 7.5 24-SDS-S12-M18F
S 12 M 22 x 1.5 PN 630 26.8 8 40 17.5 27 15 100 11.3 24-SDS-S12-M22F
S 16 M 22 x 1.5 PN 630 26.8 12 42 18.5 27 15 100 9.9 24-SDS-S16-M22F
S 16 M 27 x 2 PN 420 31.8 12 47.5 20.5 32 18.5 170 17.1 24-SDS-S16-M27F
S 20 M 22 x 1.5 PN 630 26.8 12 46 20.5 32 15 100 19.0 24-SDS-S20-M22F
S 20 M 27 x 2 PN 420 31.8 15 49.5 20.5 32 18.5 170 16.4 24-SDS-S20-M27F
S 20 M 33 x 2 PN 420 40.8 16 51.5 22.5 41 18.5 310 27.4 24-SDS-S20-M33F
S 25 M 27 x 2 PN 420 31.8 15 53 22.5 41 18.5 170 25.7 24-SDS-S25-M27F
S 25 M 33 x 2 PN 420 40.8 20 53.5 23 41 18.5 310 26.9 24-SDS-S25-M33F
S 30 M 33 x 2 PN 420 40.8 20 55.5 23.5 46 18.5 310 33.7 24-SDS-S30-M33F
S 30 M 42 x 2 PN 420 49.8 25 56 23.5 50 19 330 49.3 24-SDS-S30-M42F
S 38 M 48 x 2 PN 420 54.8 32 63.5 26 55 21.5 420 57.1 24-SDS-S38-M48F

Standard size
101
3
Elbow male stud couplings

lg2
SW2
l2
d2
dx
l
g
i
d
y
d
1
Series
Tube OD
d1
d2 Pressure dx dy lg lg2 l2 SW2 i kg/100
ca.
Order designation
LL 4 M 6 x 1 keg PN 100 2.5 3 17 15 11 9 8 1.0 24-SDE-LL4-M6T
LL 4 M 8 x 1 keg PN 100 3.5 3 17 15 11 9 8 0.9 24-SDE-LL4-M8T
LL 5 M 8 x 1 keg PN 100 3.5 3.5 17 15 9.5 11 8 1.7 24-SDE-LL5-M8T-P
LL 8 M 10 x 1 keg PN 100 6 6 20 17 11.5 12 8 2.2 24-SDE-LL8-M10T-P

L 6 M 10 x 1 keg PN 315 4 4 20 19 12 12 8 2.9 24-SDE-L6-M10T-P
L 8 M 12 x 1.5 keg PN 315 6 6 26 21 14 14 12 4.3 24-SDE-L8-M12T-P
L 12 M 18 x 1.5 keg PN 315 11 10 32 28 21 19 12 8.2 24-SDE-L12-M18T
L 15 M 18 x 1.5 keg PN 315 11 12 32 28 21 19 12 8.3 24-SDE-L15-M18T
L 18 M 22 x 1.5 keg PN 315 14 15 36 31 23.5 24 14 13.0 24-SDE-L18-M22T

S 6 M 12 x 1.5 keg PB 630 4 4 26 23 16 14 12 5.2 24-SDE-S6-M12T-P
S 8 M 14 x 1.5 keg PB 630 5 5 27 24 17 17 12 7.4 24-SDE-S8-M14T-P
S 10 M 16 x 1.5 keg PB 630 7 7 28 25 17.5 19 12 10.1 24-SDE-S10-M16T-P
S 12 M 18 x 1.5 keg PB 630 8 8 28 29 21.5 22 12 12.9 24-SDE-S12-M18T-P
S 14 M 20 x 1.5 keg PB 630 10 10 32 30 22 19 14 10.4 24-SDE-S14-M20T
S 16 M 22 x 1.5 keg PB 400 12 12 32 33 24.5 24 14 14.5 24-SDE-S16-M22T

Example for comp. :
WE06LMX
DIN 2353-FL6-St
102

lg2
SW2
l2
d2
dx
l
g
i
d
y
d
1
Series
Tube OD
d1
ca.
Order designation
LL 4 R 1/8 PN 100 4 3 17 15 11 11 8 1.0 24-SDE-LL4-R1/8T
LL 5 R 1/8 PN 100 4 3.5 17 15 9.5 11 8 1.8 24-SDE-LL5-R1/8T-P
LL 6 R 1/8 PN 100 4.5 4.5 17 15 9.5 11 8 1.6 24-SDE-LL6-R1/8T-P
LL 8 R 1/8 PN 100 6 6 20 17 11.5 12 8 2.2 24-SDE-LL8-R1/8T-P

L 6 R 1/8 PN 315 4 4 20 19 12 12 8 2.7 24-SDE-L6-R1/8T-P
L 6 R 1/4 PN 315 7 4 26 14 14 14 12 4.5 24-SDE-L6-R1/4T-P
L 6 R 3/8 PN 315 9 4 27 24 17 17 12 6.8 24-SDE-L6-R3/8T-P
L 8 R 1/8 PN 315 4 6 26 21 14 14 8 4.6 24-SDE-L8-R1/8T-P
L 8 R 1/4 PN 315 6 6 26 21 14 14 12 4.8 24-SDE-L8-R1/4T-P
L 8 R 3/8 PN 315 8 6 28 22 15 19 15 8.8 24-SDE-L8-R3/8T-P
L 10 R 1/8 PN 315 4 7 25 22 15 17 8 6.7 24-SDE-L10-R1/8T-P
L 10 R 1/4 PN 315 7 8 27 22 15 17 12 5.9 24-SDE-L10-R1/4T-P
L 10 R 3/8 PN 315 7 7 28 23 16 19 15 9.3 24-SDE-L10-R3/8T-P
L 10 R 1/2 PN 315 11 7 34 27 20 19 10 9.6 24-SDE-L10-R1/2T
L 12 R 1/4 PN 315 7 9 28 24 17 19 12 8.5 24-SDE-L12-R1/4T-P
L 12 R 3/8 PN 315 9 10 28 24 17 19 12 9.1 24-SDE-L12-R3/8T-P
L 12 R 1/2 PN 315 11 9 34 27 20 19 14 9.7 24-SDE-L12-R1/2T
L 15 R 3/8 PN 315 9 11 32 28 21 19 12 9.0 24-SDE-L15-R3/8T
L 15 R 1/2 PN 315 11 12 34 28 21 19 14 9.5 24-SDE-L15-R1/2T
L 15 R 3/4 PN 160 16 12 42 28.5 21.5 27 16 18.6 24-SDE-L15-R3/4T
L 18 R 1/2 PN 315 14 15 36 31 23.5 24 14 12.6 24-SDE-L18-R1/2T
L 18 R 3/4 PN 160 18 15 42 35 27.5 27 16 20.2 24-SDE-L18-R3/4T
L 22 R 3/4 PN 160 18 19 42 27.5 27.5 27 16 17.3 24-SDE-L22-R3/4T

WE06LRX
DIN 2353-GL6-St
103
3

lg2
SW2
l2
d2
dx
l
g
i
d
y
d
1
Series
Tube OD
d1
ca.
Order designation
S 6 R 1/4 PB 630 4 4 26 23 16 14 12 5.4 24-SDE-S6-R1/4T-P
S 8 R 1/4 PB 630 5 5 27 24 17 17 12 7.0 24-SDE-S8-R1/4T-P
S 10 R 1/4 PB 630 5 7 27 25 17.5 19 12 9.3 24-SDE-S10-R1/4T-P
S 10 R 3/8 PB 630 7 7 28 25 17.5 19 12 10.2 24-SDE-S10-R3/8T-P
S 10 R 1/2 PB 630 10 7 34 27 19.5 19 16 11.5 24-SDE-S10-R1/2T
S 12 R 3/8 PB 630 8 8 28 29 21.5 22 12 12.7 24-SDE-S12-R3/8T-P
S 12 R 1/2 PB 630 11 8 34 29 21.5 19 14 10.3 24-SDE-S12-R1/2T
S 14 R 1/4 PB 630 7 10 30 30 22 19 12 9.3 24-SDE-S14-R1/4T
S 14 R 3/8 PB 630 8 10 30 30 22 19 12 9.7 24-SDE-S14-R3/8T
S 14 R 1/2 PB 630 10 10 32 30 22 19 14 10.5 24-SDE-S14-R1/2T
S 16 R 1/2 PB 400 12 12 32 33 24.5 24 14 13.9 24-SDE-S16-R1/2T
S 16 R 3/4 PB 400 16 12 42 33 24.5 27 16 18.9 24-SDE-S16-R3/4T
S 20 R 1/2 PB 400 12 16 40 37 26.5 27 14 21.6 24-SDE-S20-R1/2T
S 20 R 3/4 PB 400 16 16 42 37 26.5 27 16 21.7 24-SDE-S20-R3/4T

104

lg2
SW2
l2
d2
dx
l
g
i
d
y
d
1
Series
Tube OD
d1
d2 Pressure dx dy lg lg2 l2 SW2 i Nm
-10 %
kg/100
ca.
Order designation
LL 4 1/8 NPT PN 100 3 3 17 15 11 11 9.9 15 1.8 24-SDE-LL4-N1/8T-P
LL 6 1/8 NPT PN 100 4.5 4.5 17 15 9.5 11 9.9 15 1.7 24-SDE-LL6-N1/8T-P
LL 8 1/8 NPT PN 100 6 6 20 17 11.5 12 9.9 15 2.4 24-SDE-LL8-N1/8T-P

L 6 1/8 NPT PN 315 4 4 20 19 12 12 9.9 15 3.0 24-SDE-L6-N1/8T-P
L 6 1/4 NPT PN 315 4 4 26 21 14 14 15.1 35 4.9 24-SDE-L6-N1/4T-P
L 8 1/4 NPT PN 315 6 6 26 21 14 14 15.1 35 4.7 24-SDE-L8-N1/4T-P
L 10 1/4 NPT PN 315 7 7 27 22 15 17 15.1 35 6.2 24-SDE-L10-N1/4T-P
L 10 3/8 NPT PN 315 9 8 28 24 17 19 15.1 55 9.1 24-SDE-L10-N3/8T-P
L 12 1/4 NPT PN 315 7 9 28 24 17 19 15.1 35 8.6 24-SDE-L12-N1/4T-P
L 12 3/8 NPT PN 315 9 9 28 24 17 19 15.2 55 9.0 24-SDE-L12-N3/8T-P
L 12 1/2 NPT PN 315 12 9 33 28 21 24 19.8 110 12.3 24-SDE-L12-N1/2T
L 15 1/2 NPT PN 315 11 11 36 31 24 24 19.8 110 14.2 24-SDE-L15-N1/2T
L 18 1/2 NPT PN 315 14 14 37 31 23.5 24 19.8 110 12.9 24-SDE-L18-N1/2T
L 22 3/4 NPT PN 160 18 19 42 35 27.5 27 20.1 175 17.4 24-SDE-L22-N3/4T
L 28 1 NPT PN 160 23 24 48 38 30.5 36 25 265 28.5 24-SDE-L28-N1T
L 35 1 1/4 NPT PN 160 30 30 54 45 34.5 41 25.6 315 47.7 24-SDE-L35-N11/4T
L 42 1 1/2 NPT PN 160 36 36 61 51 40 50 26 385 72.3 24-SDE-L42-N11/2T

S 6 1/4 NPT PN 630 4 4 26 23 16 14 15.1 35 5.6 24-SDE-S6-N1/4T-P
S 8 1/4 NPT PN 630 5 5 27 24 17 17 15.1 35 7.3 24-SDE-S8-N1/4T-P
S 10 3/8 NPT PN 630 7 7 28 25 17.5 19 15.2 55 10.4 24-SDE-S10-N3/8T-P
S 12 3/8 NPT PN 630 8 8 29 29 21.5 22 15.2 55 12.6 24-SDE-S12-N3/8T-P
S 14 1/2 NPT PN 630 10 10 33 33 25 24 19.8 110 14.9 24-SDE-S14-N1/2T
S 16 1/2 NPT PN 400 12 12 36 33 24.5 24 19.8 110 14.6 24-SDE-S16-N1/2T
S 20 3/4 NPT PN 400 16 16 42 37 26.5 27 20.1 175 21.5 24-SDE-S20-N3/4T
S 25 1 NPT PN 400 20 20 49 42 30 36 25 265 37.6 24-SDE-S25-N1T
S 30 1 1/4 NPT PN 400 25 25 54 49 35.5 41 25.6 315 64.8 24-SDE-S30-N11/4T
S 38 1 1/2 NPT PN 315 32 32 61 57 41 50 26 385 97.1 24-SDE-S38-N11/2T

WE06L1/8NPTX
105
3
L male stud couplings

lg2
l2
dx
SW2
d2
l
g

d
y

i

d
1

Series
Tube OD
d1
ca.
Order designation
LL 4 M 8 x 1 keg PN 100 3.5 20 32 15 11 9 8 1.2 24-SDL-LL4-M8T
LL 6 M 10 x 1 keg PN 100 4.5 20 32 15 9.5 9 8 1.2 24-SDL-LL6-M10T
LL 8 M 10 x 1 keg PN 100 6 20 37 17 11.5 12 8 2.8 24-SDL-LL8-M10T-P

L 6 M 10 x 1 keg PN 315 4 20 39 19 12 12 8 3.8 24-SDL-L6-M10T-P
L 8 M 12 x 1.5 keg PN 315 6 20 47 21 14 14 12 5.4 24-SDL-L8-M12T-P
L 15 M 18 x 1.5 keg PN 315 11 20 60 28 21 19 12 10.4 24-SDL-L15-M18T
L 18 M 22 x 1.5 keg PN 315 14 20 67 31 23.5 24 14 16.5 24-SDL-L18-M22T

S 6 M 12 x 1.5 keg PB 630 4 20 49 23 16 14 12 7.0 24-SDL-S6-M12T-P
S 8 M 14 x 1.5 keg PB 630 5 20 51 24 17 17 12 9.3 24-SDL-S8-M14T-P
S 10 M 16 x 1.5 keg PB 630 7 20 53 25 17.5 19 12 11.8 24-SDL-S10-M16T-P
S 12 M 18 x 1.5 keg PB 630 8 20 57 29 21.5 22 12 16.8 24-SDL-S12-M18T-P
S 14 M 20 x 1.5 keg PB 630 10 20 62 30 22 19 14 13.2 24-SDL-S14-M20T
S 16 M 22 x 1.5 keg PB 400 12 20 65 33 24.5 24 14 16.5 24-SDL-S16-M22T

Operating pressure PB 630 only
Example for comp. :
LE06LMX
DIN 2353-AAL6-St
106
L male stud couplings

lg2
l2
dx
SW2
d2
l
g

d
y

i

d
1

Series
Tube OD
d1
ca.
Order designation
LL 4 R 1/8 PN 100 4 3 32 15 11 9 8 1.3 24-SDL-LL4-R1/8T
LL 6 R 1/8 PN 100 4.5 4.5 32 15 9.5 9 8 1.2 24-SDL-LL6-R1/8T
LL 8 R 1/8 PN 100 6 6 37 17 11.5 12 8 2.8 24-SDL-LL8-R1/8T-P

L 6 R 1/8 PN 315 4 4 39 19 12 12 8 3.7 24-SDL-L6-R1/8T-P
L 8 R 1/4 PN 315 6 6 47 21 14 14 12 5.6 24-SDL-L8-R1/4T-P
L 10 R 1/4 PN 315 7 8 49 22 15 17 12 7.3 24-SDL-L10-R1/4T-P
L 12 R 3/8 PN 315 9 10 52 24 17 19 12 9.8 24-SDL-L12-R3/8T-P
L 15 R 1/2 PN 315 11 12 62 28 21 19 14 11.7 24-SDL-L15-R1/2T
L 18 R 1/2 PN 315 14 15 67 31 23.5 24 14 15.7 24-SDL-L18-R1/2T

S 6 R 1/4 PB 630 4 4 49 23 16 14 12 12.1 24-SDL-S6-R1/4T-P
S 8 R 1/4 PB 630 5 5 51 24 17 17 12 9.0 24-SDL-S8-R1/4T-P
S 10 R 3/8 PB 630 7 7 53 25 17.5 19 12 11.9 24-SDL-S10-R3/8T-P
S 12 R 3/8 PB 630 8 8 57 29 21.5 22 12 16.2 24-SDL-S12-R3/8T-P
S 14 R 1/2 PB 630 10 10 62 30 22 19 14 13.7 24-SDL-S14-R1/2T
S 16 R 1/2 PB 400 12 12 65 33 24.5 24 14 16.5 24-SDL-S16-R1/2T

Example for comp. :
LE06LRX
DIN 2353-ABL6-St
107
3
T male stud couplings

lg
l2 SW2
dx
l
g
2
d2
i
d
y
d
1
Series
Tube OD
d1
ca.
Order designation
LL 4 M 8 x 1 keg PN 100 3.5 3 30 17 11 9 8 1.2 24-SDT-LL4-M8T
LL 6 M 10 x 1 keg PN 100 4.5 4.5 30 17 9.5 9 8 1.2 24-SDT-LL6-M10T
LL 8 M 10 x 1 keg PN 100 6 6 34 20 11.5 12 8 2.8 24-SDT-LL8-M10T-P

L 6 M 10 x 1 keg PN 315 4 4 38 20 12 12 8 3.6 24-SDT-L6-M10T-P
L 8 M 12 x 1.5 keg PN 315 6 6 42 26 14 14 12 5.5 24-SDT-L8-M12T-P
L 15 M 18 x 1.5 keg PN 315 11 12 56 32 21 19 12 10.2 24-SDT-L15-M18T
L 18 M 22 x 1.5 keg PN 315 14 15 62 36 23.5 24 14 14.1 24-SDT-L18-M22T

S 6 M 12 x 1.5 keg PB 630 4 4 46 26 16 14 12 6.6 24-SDT-S6-M12T-P
S 8 M 14 x 1.5 keg PB 630 5 5 48 27 17 17 12 9.2 24-SDT-S8-M14T-P
S 10 M 16 x 1.5 keg PB 630 7 7 50 28 17.5 19 12 12.1 24-SDT-S10-M16T-P
S 12 M 18 x 1.5 keg PB 630 8 8 58 28 21.5 22 12 16.7 24-SDT-S12-M18T-P
S 14 M 20 x 1.5 keg PB 630 10 10 60 32 22 19 14 13.2 24-SDT-S14-M20T
S 16 M 22 x 1.5 keg PB 400 12 12 66 32 24.5 24 14 16.1 24-SDT-S16-M22T

Example for comp. :
TE06LMX
DIN 2353-ML6-St
108
T male stud couplings

lg
l2 SW2
dx
l
g
2
d2
i
d
y
d
1
Series
Tube OD
d1
ca.
Order designation
LL 4 R 1/8 PN 100 4 3 30 17 11 9 8 1.3 24-SDT-LL4-R1/8T
LL 6 R 1/8 PN 100 4.5 4.5 30 17 9.5 9 8 1.2 24-SDT-LL6-R1/8T
LL 8 R 1/8 PN 100 6 6 34 20 11.5 12 8 2.7 24-SDT-LL8-R1/8T-P

L 6 R 1/8 PN 315 4 4 38 20 12 12 8 3.6 24-SDT-L6-R1/8T-P
L 8 R 1/4 PN 315 6 6 42 26 14 14 12 5.8 24-SDT-L8-R1/4T-P
L 10 R 1/4 PN 315 7 8 44 27 15 17 12 7.2 24-SDT-L10-R1/4T-P
L 12 R 1/4 PN 315 7 9 48 28 17 19 12 10.2 24-SDT-L12-R1/4T-P
L 12 R 3/8 PN 315 9 10 48 28 17 19 12 10.0 24-SDT-L12-R3/8T-P
L 15 R 1/2 PN 315 11 12 56 34 21 19 14 11.6 24-SDT-L15-R1/2T
L 18 R 1/2 PN 315 14 15 62 36 23.5 24 14 15.7 24-SDT-L18-R1/2T

S 6 R 1/4 PB 630 4 4 46 26 16 14 12 7.1 24-SDT-S6-R1/4T-P
S 8 R 1/4 PB 630 5 5 48 27 17 17 12 9.2 24-SDT-S8-R1/4T-P
S 10 R 3/8 PB 630 7 7 50 28 17.5 19 12 12.1 24-SDT-S10-R3/8T-P
S 12 R 3/8 PB 630 8 8 58 28 21.5 22 12 16.3 24-SDT-S12-R3/8T-P
S 14 R 1/2 PB 630 10 10 60 32 22 19 14 13.8 24-SDT-S14-R1/2T
S 16 R 1/2 PB 400 12 12 66 32 24.5 24 14 18.5 24-SDT-S16-R1/2T

Example for comp. :
TE06LRX
DIN 2353-NL6-St
109
3
Connecting adapters

111
3
Straight couplings
For tube to tube connection according to
DIN 2353 / ISO 8434-1

d1
dy
SW1
l
g
l
2
Series
Tube OD
d1
Pressure dy lg l2 SW1 kg/100
ca.
Order designation
LL 4 PN 100 3 20 12 9 0.5 24-S-LL4
LL 5 PN 100 3.5 20 9 11 0.8 24-S-LL5
LL 6 PN 100 4.5 20 9 11 0.7 24-S-LL6
LL 8 PN 100 6 23 12 12 1.0 24-S-LL8

L 6 PN 500 4 24 10 12 1.2 24-S-L6
L 8 PN 500 6 25 11 14 1.6 24-S-L8
L 10 PN 500 8 27 13 17 2.2 24-S-L10
L 12 PN 400 10 28 14 19 2.8 24-S-L12
L 15 PN 400 12 30 16 24 4.9 24-S-L15
L 18 PN 400 15 31 16 27 6.7 24-S-L18
L 22 PN 250 19 35 20 32 8.8 24-S-L22
L 28 PN 250 24 36 21 41 13.6 24-S-L28
L 35 PN 250 30 41 20 46 21.0 24-S-L35
L 42 PN 250 36 43 21 55 29.4 24-S-L42

S 6 PN 800 4 30 16 14 2.5 24-S-S6
S 8 PN 800 5 32 18 17 3.7 24-S-S8
S 10 PN 800 7 32 17 19 4.3 24-S-S10
S 12 PN 630 8 34 19 22 5.9 24-S-S12
S 14 PN 630 10 38 22 24 7.5 24-S-S14
S 16 PN 630 12 38 21 27 8.7 24-S-S16
S 20 PN 420 16 44 23 32 14.2 24-S-S20
S 25 PN 420 20 50 26 41 25.0 24-S-S25
S 30 PN 420 25 54 27 46 32.3 24-S-S30
S 38 PN 420 32 61 29 55 53.8 24-S-S38

Example for comp. :
G06LX
ISO 8434-1-S-L6-St
112
Straight reducing couplings
DIN 2353 / ISO 8434-1

d1
dy
d2
SW1
l
g
l
2
Series
Tube OD
d1
Series
Tube OD
d2
ca.
Order designation
LL 6 LL 4 PN 100 3 20 10.5 11 0.7 24-S-LL6-LL4
LL 8 LL 4 PN 100 3 22 12.5 12 0.9 24-S-LL8-LL4
LL 8 LL 6 PN 100 4.5 22 11 12 1.1 24-S-LL8-LL6

L 8 L 6 PN 500 4 25 11 14 1.5 24-S-L8-L6
L 10 L 6 PN 500 4 26 12 17 2.0 24-S-L10-L6
L 10 L 8 PN 500 6 26 12 17 2.1 24-S-L10-L8
L 12 L 6 PN 400 4 27 13 19 2.5 24-S-L12-L6
L 12 L 8 PN 400 6 27 13 19 2.6 24-S-L12-L8
L 12 L 10 PN 400 8 28 14 19 2.7 24-S-L12-L10
L 15 L 6 PN 400 4 28 14 24 3.8 24-S-L15-L6
L 15 L 8 PN 400 6 28 14 24 4.0 24-S-L15-L8
L 15 L 10 PN 400 8 29 15 24 4.1 24-S-L15-L10
L 15 L 12 PN 400 10 29 15 24 4.2 24-S-L15-L12
L 18 L 8 PN 400 6 29 14.5 27 6.0 24-S-L18-L8
L 18 L 10 PN 400 8 30 15.5 27 5.6 24-S-L18-L10
L 18 L 12 PN 400 10 30 15.5 27 5.7 24-S-L18-L12
L 18 L 15 PN 400 12 31 16.5 27 6.1 24-S-L18-L15
L 22 L 10 PN 250 8 32 17.5 32 7.5 24-S-L22-L10
L 22 L 12 PN 250 10 32 17.5 32 7.6 24-S-L22-L12
L 22 L 15 PN 250 12 33 18.5 32 8.1 24-S-L22-L15
L 22 L 18 PN 250 15 33 18 32 8.6 24-S-L22-L18
L 28 L 10 PN 250 8 33 18.5 41 12.2 24-S-L28-L10
L 28 L 15 PN 250 12 34 19.5 41 12.2 24-S-L28-L15
L 28 L 18 PN 250 15 34 19 41 12.3 24-S-L28-L18
L 28 L 22 PN 250 19 36 21 41 13.2 24-S-L28-L22
L 35 L 22 PN 250 19 39 21 46 19.0 24-S-L35-L22
L 35 L 28 PN 250 24 39 21 46 19.0 24-S-L35-L28
L 42 L 28 PN 250 24 41 22.5 55 26.8 24-S-L42-L28
L 42 L 35 PN 250 30 43 21.5 55 29.3 24-S-L42-L35

Example for comp. :
GR08/06LX
ISO 8434-1-RDS-L8xL6-St
113
3
DIN 2353 / ISO 8434-1

d1
dy
d2
SW1
l
g
l
2
Series
Tube OD
d1
Series
Tube OD
d2
ca.
Order designation
S 8 S 6 PN 800 4 32 18 17 3.4 24-S-S8-S6
S 10 S 6 PN 800 4 32 17.5 19 4.0 24-S-S10-S6
S 10 S 8 PN 800 8 32 17.5 19 4.2 24-S-S10-S8
S 12 S 6 PN 630 4 34 19.5 22 5.4 24-S-S12-S6
S 12 S 8 PN 630 5 34 19.5 22 5.6 24-S-S12-S8
S 12 S 10 PN 630 7 34 19 22 5.8 24-S-S12-S10
S 14 S 10 PN 630 7 36 20.5 24 6.9 24-S-S14-S10
S 14 S 12 PN 630 8 36 20.5 24 7.0 24-S-S14-S12
S 16 L 12 PN 400 10 35 19.5 27 7.7 24-S-S16-L12
S 16 L 15 PN 400 12 36 20.5 27 7.9 24-S-S16-L15
S 16 S 8 PN 630 5 36 20.5 27 7.8 24-S-S16-S8
S 16 S 10 PN 630 7 36 20 27 7.9 24-S-S16-S10
S 16 S 12 PN 630 8 36 20 27 8.0 24-S-S16-S12
S 16 S 14 PN 630 10 38 21.5 27 8.7 24-S-S16-S14
S 20 L 15 PN 400 12 40 22.5 32 13.9 24-S-S20-L15
S 20 S 10 PN 420 7 40 22 32 12.2 24-S-S20-S10
S 20 S 12 PN 420 8 40 22 32 12.5 24-S-S20-S12
S 20 S 14 PN 420 10 42 23.5 32 12.9 24-S-S20-S14
S 20 S 16 PN 420 12 42 23 32 12.9 24-S-S20-S16
S 25 S 16 PN 420 12 47 26.5 41 22.0 24-S-S25-S16
S 25 S 20 PN 420 16 48 25.5 41 23.2 24-S-S25-S20
S 30 S 20 PN 420 16 50 26 46 29.4 24-S-S30-S20
S 30 S 25 PN 420 20 52 26.5 46 31.1 24-S-S30-S25
S 38 S 25 PN 420 20 57 29 55 48.2 24-S-S38-S25
S 38 S 30 PN 420 25 59 29.5 55 48.8 24-S-S38-S30

114
Elbow couplings
DIN 2353 / ISO 8434-1

l2
SW2
l
g
d
y
d
1
Series
Tube OD
d1
ca.
Order designation
LL 4 PN 100 3 15 11 9 1.3 24-E-LL4-P
LL 6 PN 100 4.5 15 9.5 11 1.5 24-E-LL6-P
LL 8 PN 100 6 17 11.5 12 2.3 24-E-LL8-P

L 6 PN 500 4 19 12 12 2.8 24-E-L6-P
L 8 PN 500 6 21 14 14 4.1 24-E-L8-P
L 10 PN 500 8 22 15 17 5.6 24-E-L10-P
L 12 PN 400 10 24 17 19 7.7 24-E-L12-P
L 15 PN 400 12 28 21 19 7.4 24-E-L15
L 18 PN 400 15 31 23.5 24 11.9 24-E-L18
L 22 PN 250 19 35 27.5 27 15.2 24-E-L22
L 28 PN 250 24 38 30.5 36 25.1 24-E-L28
L 35 PN 250 30 45 34.5 41 43.1 24-E-L35
L 42 PN 250 36 51 40 50 78.2 24-E-L42

S 6 PN 800 4 23 16 14 5.1 24-E-S6-P
S 8 PN 800 5 24 17 17 7.2 24-E-S8-P
S 10 PN 800 7 25 17.5 19 9.8 24-E-S10-P
S 12 PN 630 8 29 21.5 22 14.4 24-E-S12-P
S 14 PN 630 10 30 22 19 10.4 24-E-S14
S 16 PN 630 12 33 24.5 24 12.7 24-E-S16
S 20 PN 420 16 37 26.5 27 20.5 24-E-S20
S 25 PN 420 20 42 30 36 34.9 24-E-S25
S 30 PN 420 25 49 35.5 41 58.8 24-E-S30
S 38 PN 420 32 57 41 50 103.1 24-E-S38

Example for comp. :
W06LX
ISO 8434-1-E-L6-St
115
3
T couplings
Three sided tube connection according to
DIN 2353 / ISO 8434-1

lg
SW2 l2
l
g
2
d
y
d
1
Series
Tube OD
d1
Pressure dy lg lg2 l2 SW2 kg/100
ca.
Order designation
LL 4 PN 100 3 30 15 11 9 1.1 24-T-LL4
LL 5 PN 100 3.5 30 15 9.5 9 1.2 24-T-LL5
LL 6 PN 100 4.5 30 15 9.5 9 1.0 24-T-LL6
LL 8 PN 100 6 34 17 11.5 12 2.8 24-T-LL8-P

L 6 PN 500 4 38 19 12 12 3.5 24-T-L6-P
L 8 PN 500 6 42 21 14 14 5.1 24-T-L8-P
L 10 PN 500 8 44 22 15 17 6.7 24-T-L10-P
L 12 PN 400 10 48 24 17 19 9.1 24-T-L12-P
L 15 PN 400 12 56 28 21 19 10.0 24-T-L15
L 18 PN 400 15 62 31 23.5 24 15.0 24-T-L18
L 22 PN 250 19 70 35 27.5 27 18.6 24-T-L22
L 28 PN 250 24 76 38 30.5 36 29.9 24-T-L28
L 35 PN 250 30 90 45 34.5 41 52.3 24-T-L35
L 42 PN 250 36 102 51 40 50 91.5 24-T-L42

S 6 PN 800 4 46 23 16 14 6.7 24-T-S6-P
S 8 PN 800 5 48 24 17 17 9.1 24-T-S8-P
S 10 PN 800 7 50 25 17.5 19 11.5 24-T-S10-P
S 12 PN 630 8 58 29 21.5 22 17.3 24-T-S12-P
S 14 PN 630 10 60 30 22 19 13.1 24-T-S14
S 16 PN 630 12 66 33 24.5 24 16.5 24-T-S16
S 20 PN 420 16 74 37 26.5 27 26.0 24-T-S20
S 25 PN 420 20 84 42 30 36 43.6 24-T-S25
S 30 PN 420 25 98 49 35.5 41 71.5 24-T-S30
S 38 PN 420 32 114 57 41 50 125.8 24-T-S38

Example for comp. :
T06LX
ISO 8434-1-T-L6-St
116
T reducing couplings
DIN 2353 / ISO 8434-1

lg
l2
SW2
dy2
d2
l4
d
3
d
1
d
y
l
6
l
g
2
Series
Tube OD
d1
d2 d3 Pressure dy dy2 lg lg2 l2 l4 l6 SW2 kg/100
ca.
Order designation
L 6 8 6 PN 500 4 6 42 21 14 14 14 14 5.1 24-T-L6-L8-L6-P
L 6 10 6 PN 500 4 8 44 22 15 15 15 17 6.6 24-T-L6-L10-L6-P
L 8 6 8 PN 500 6 4 42 21 14 14 14 14 5.2 24-T-L8-L6-L8-P
L 8 8 6 PN 500 4 6 42 21 14 14 14 14 5.0 24-T-L8-L8-L6-P
L 8 10 8 PN 500 6 8 44 22 15 15 15 17 6.9 24-T-L8-L10-L8-P
L 8 12 8 PN 400 6 10 48 24 17 17 17 19 9.7 24-T-L8-L12-L8-P
L 10 6 10 PN 500 8 4 44 22 15 15 15 17 6.6 24-T-L10-L6-L10-P
L 10 6 6 PN 500 4 4 44 22 15 15 15 14 6.5 24-T-L10-L6-L6-P
L 10 8 10 PN 500 8 6 44 22 15 15 15 17 6.7 24-T-L10-L8-L10-P
L 10 10 6 PN 500 4 8 44 22 15 15 15 17 6.5 24-T-L10-L10-L6-P
L 10 12 10 PN 400 8 10 48 24 17 17 17 19 8.9 24-T-L10-L12-L10-P
L 10 15 10 PN 400 8 11 56 28 21 21 21 19 10.5 24-T-L10-L15-L10
L 12 6 12 PN 400 10 4 48 24 17 17 17 19 9.4 24-T-L12-L6-L12-P
L 12 8 12 PN 400 10 6 48 24 17 17 17 19 9.3 24-T-L12-L8-L12-P
L 12 8 8 PN 400 6 6 48 24 17 17 17 19 9.3 24-T-L12-L8-L8-P
L 12 10 10 PN 400 8 8 48 24 17 17 17 19 9.2 24-T-L12-L10-L10-P
L 12 10 12 PN 400 10 8 48 24 17 17 17 19 9.0 24-T-L12-L10-L12-P
L 12 12 10 PN 400 8 10 48 24 17 17 17 19 9.1 24-T-L12-L12-L10-P
L 12 12 8 PN 400 6 10 48 24 17 17 17 19 9.2 24-T-L12-L12-L8-P
L 12 15 12 PN 400 10 12 56 28 21 21 21 19 9.9 24-T-L12-L15-L12
L 12 18 12 PN 400 10 15 62 31 24 24 23.5 24 15.5 24-T-L12-L18-L12
L 12 22 12 PN 250 10 19 70 35 28 28 27.5 27 23.5 24-T-L12-L22-L12
L 15 6 15 PN 400 12 4 56 28 21 21 21 19 10.2 24-T-L15-L6-L15
L 15 8 15 PN 400 12 6 56 28 21 21 21 19 10.2 24-T-L15-L8-L15
L 15 10 10 PN 400 8 8 56 28 21 21 21 19 9.9 24-T-L15-L10-L10
L 15 10 15 PN 400 12 8 56 28 21 21 21 19 9.8 24-T-L15-L10-L15
L 15 12 12 PN 400 10 10 56 28 21 21 21 19 9.9 24-T-L15-L12-L12
L 15 12 15 PN 400 12 10 56 28 21 21 21 19 9.9 24-T-L15-L12-L15
L 15 15 10 PN 400 8 12 56 28 21 21 21 19 10.0 24-T-L15-L15-L10
L 15 15 12 PN 400 10 12 56 28 21 21 21 19 9.9 24-T-L15-L15-L12
L 15 18 15 PN 400 12 15 62 31 24 24 24 24 19.3 24-T-L15-L18-L15
Example for comp. :
TR06/08/06LX
117
3
DIN 2353 / ISO 8434-1

lg
l2
SW2
dy2
d2
l4
d
3
d
1
d
y
l
6
l
g
2
Series
Tube OD
d1
ca.
Order designation
L 15 22 15 PN 250 12 19 70 35 28 28 27.5 27 22.6 24-T-L15-L22-L15
L 18 8 18 PN 400 15 6 62 31 23.5 23.5 24 24 19.0 24-T-L18-L8-L18
L 18 10 10 PN 400 8 8 62 31 23.5 23.5 24 24 15.2 24-T-L18-L10-L10
L 18 10 18 PN 400 15 8 62 31 23.5 23.5 24 24 15.4 24-T-L18-L10-L18
L 18 12 18 PN 400 15 10 62 31 23.5 23.5 24 24 15.1 24-T-L18-L12-L18
L 18 15 15 PN 400 12 12 62 31 23.5 23.5 24 24 18.9 24-T-L18-L15-L15
L 18 15 18 PN 400 15 12 62 31 23.5 23.5 24 24 15.4 24-T-L18-L15-L18
L 18 18 10 PN 400 8 15 62 31 23.5 23.5 23.5 24 15.1 24-T-L18-L18-L10
L 18 18 15 PN 400 12 15 62 31 23.5 23.5 23.5 24 18.9 24-T-L18-L18-L15
L 18 22 15 PN 250 12 19 70 35 27.5 27.5 27.5 27 23.3 24-T-L18-L22-L15
L 18 22 18 PN 250 15 19 70 35 27.5 27.5 27.5 27 22.2 24-T-L18-L22-L18
L 22 10 22 PN 250 19 8 70 35 27.5 27.5 28 27 20.4 24-T-L22-L10-L22
L 22 12 22 PN 250 19 10 70 35 27.5 27.5 28 27 19.7 24-T-L22-L12-L22
L 22 15 15 PN 250 12 12 70 35 28 27.5 28 27 21.2 24-T-L22-L15-L15
L 22 15 22 PN 250 19 12 70 35 27.5 27.5 28 27 19.9 24-T-L22-L15-L22
L 22 18 18 PN 250 15 15 70 35 27.5 27.5 27.5 27 21.2 24-T-L22-L18-L18
L 22 18 22 PN 250 19 15 70 35 27.5 27.5 27.5 27 20.5 24-T-L22-L18-L22
L 22 22 18 PN 250 15 19 70 35 27.5 27.5 27.5 27 19.8 24-T-L22-L22-L18
L 22 28 22 PN 250 19 24 76 38 30.5 30.5 30.5 36 36.4 24-T-L22-L28-L22
L 28 10 28 PN 250 24 8 76 38 30.5 30.5 31 36 31.8 24-T-L28-L10-L28
L 28 12 28 PN 250 24 10 76 38 30.5 30.5 31 36 32.1 24-T-L28-L12-L28
L 28 15 28 PN 250 24 12 76 38 30.5 30.5 31 36 32.3 24-T-L28-L15-L28
L 28 18 28 PN 250 24 15 76 38 30.5 30.5 30.5 36 31.7 24-T-L28-L18-L28
L 28 22 22 PN 250 19 19 76 38 30.5 30.5 30.5 36 32.3 24-T-L28-L22-L22
L 28 22 28 PN 250 24 19 76 38 30.5 30.5 30.5 36 30.0 24-T-L28-L22-L28
L 28 35 28 PN 250 24 30 90 45 37.5 37.5 34.5 41 61.8 24-T-L28-L35-L28
L 28 42 28 PN 250 24 36 102 51 43.5 43.5 40 50 112.0 24-T-L28-L42-L28
L 35 18 35 PN 250 30 15 90 45 34.5 34.5 37.5 41 60.0 24-T-L35-L18-L35
L 35 28 28 PN 250 24 24 90 45 34.5 37.5 37.5 41 59.0 24-T-L35-L28-L28
L 35 28 35 PN 250 30 24 90 45 34.5 34.5 37.5 41 54.0 24-T-L35-L28-L35
L 35 42 35 PN 250 30 36 102 51 40.5 40.5 40 50 106.0 24-T-L35-L42-L35
118
DIN 2353 / ISO 8434-1

lg
l2
SW2
dy2
d2
l4
d
3
d
1
d
y
l
6
l
g
2
Series
Tube OD
d1
ca.
Order designation
L 42 18 42 PN 250 36 15 102 51 40 40 43.5 50 92.2 24-T-L42-L18-L42
L 42 22 42 PN 250 36 19 102 51 40 40 43.5 50 101.6 24-T-L42-L22-L42
L 42 28 42 PN 250 36 24 102 51 40 40 43.5 50 97.4 24-T-L42-L28-L42

S 10 6 10 PN 800 7 4 50 25 17.5 17.5 18 19 11.7 24-T-S10-S6-S10-P
S 12 8 12 PN 630 8 5 58 29 21.5 21.5 22 22 17.5 24-T-S12-S8-S12-P
S 12 8 8 PN 630 5 5 58 29 21.5 21.5 22 22 16.9 24-T-S12-S8-S8-P
S 12 10 12 PN 630 8 7 58 29 21.5 21.5 21.5 22 17.6 24-T-S12-S10-S12-P
S 12 16 12 PN 630 8 12 66 33 24.5 24.5 24.5 24 17.7 24-T-S12-S16-S12
S 16 6 16 PN 630 12 4 66 33 24.5 24.5 26 24 16.8 24-T-S16-S6-S16
S 16 8 16 PN 630 12 5 66 33 24.5 24.5 26 24 17.1 24-T-S16-S8-S16
S 16 10 16 PN 630 12 7 66 33 24.5 24.5 25.5 24 17.1 24-T-S16-S10-S16
S 16 12 16 PN 630 12 8 66 33 24.5 24.5 25.5 24 16.9 24-T-S16-S12-S16
S 16 20 16 PN 420 12 16 74 37 28.5 28.5 26.5 27 26.7 24-T-S16-S20-S16
S 20 10 20 PN 420 16 7 74 37 26.5 26.5 29.5 27 26.4 24-T-S20-S10-S20
S 20 12 20 PN 420 16 8 74 37 26.5 26.5 29.5 27 26.5 24-T-S20-S12-S20
S 20 16 16 PN 420 12 12 74 37 26.5 28.5 28.5 27 25.3 24-T-S20-S16-S16
S 20 16 20 PN 420 16 12 74 37 26.5 26.5 28.5 27 25.9 24-T-S20-S16-S20
S 20 25 20 PN 420 16 20 84 42 31.5 31.5 30 36 45.3 24-T-S20-S25-S20
S 25 12 25 PN 420 20 8 84 42 30 30 34.5 36 44.8 24-T-S25-S12-S25
S 25 16 25 PN 420 20 12 84 42 30 30 33.5 36 44.5 24-T-S25-S16-S25
S 25 18 25 PN 420 20 15 84 42 30 30 34.5 36 46.6 24-T-S25-S18-S25
S 25 20 25 PN 420 20 16 84 42 30 30 31.5 36 43.4 24-T-S25-S20-S25
S 25 25 20 PN 420 16 20 84 42 30 31.5 30 36 47.4 24-T-S25-S25-S20
S 25 30 25 PN 420 20 25 98 49 37 37 35.5 41 77.8 24-T-S25-S30-S25
S 30 16 30 PN 420 25 12 98 49 35.5 35.5 40.5 41 79.0 24-T-S30-S16-S30
S 30 20 30 PN 420 25 16 98 49 35.5 35.5 38.5 41 71.0 24-T-S30-S20-S30
S 38 16 38 PN 420 32 12 114 57 41 41 48.5 50 120.4 24-T-S38-S16-S38
S 38 25 38 PN 420 32 20 114 57 41 41 45 50 118.3 24-T-S38-S25-S38
S 38 38 25 PN 420 20 32 114 57 41 45 41 50 134.1 24-T-S38-S38-S25

119
3
Cross couplings
Four sided tube connection according to
DIN 2353 / ISO 8434-1

l2
SW2
lg
d
y
d
1
Series
Tube OD
d1
ca.
Order designation
LL 4 PN 100 3 30 11 12 2.1 24-K-LL4
LL 6 PN 100 4.5 30 9.5 12 2.3 24-K-LL6
LL 8 PN 100 6 34 11.5 12 2.7 24-K-LL8

L 6 PN 315 4 38 12 12 3.9 24-K-L6
L 8 PN 315 6 42 14 12 4.6 24-K-L8
L 10 PN 315 8 44 15 14 5.2 24-K-L10
L 12 PN 315 10 48 17 17 8.2 24-K-L12
L 15 PN 315 12 56 21 19 12.7 24-K-L15
L 18 PN 315 15 62 23.5 24 18.8 24-K-L18
L 22 PN 160 19 70 27.5 27 21.0 24-K-L22
L 28 PN 160 24 76 30.5 36 34.6 24-K-L28
L 35 PN 160 30 90 34.5 41 62.3 24-K-L35
L 42 PN 160 36 102 40 50 94.5 24-K-L42

S 6 PN 630 4 46 16 12 6.6 24-K-S6
S 8 PN 630 5 48 17 14 8.1 24-K-S8
S 10 PN 630 7 50 17.5 17 10.7 24-K-S10
S 12 PN 630 8 58 21.5 17 14.9 24-K-S12
S 14 PN 630 10 60 22 19 15.8 24-K-S14
S 16 PN 400 12 66 24.5 24 23.3 24-K-S16
S 20 PN 400 16 74 26.5 27 29.4 24-K-S20
S 25 PN 400 20 84 30 36 51.9 24-K-S25
S 30 PN 400 25 98 35.5 41 89.0 24-K-S30
S 38 PN 315 32 114 41 50 140.3 24-K-S38

Example for comp. :
K06LX
ISO 8434-1-K-L6-St
120
Bulkhead couplings

121
3
Straight bulkhead couplings

d1
dy
SW1
SW4
l
g
l
5
l
2
Series
Tube OD
d1
Pressure dy lg l2 l5 SW1 SW4 kg/100
ca.
Order designation
L 6 PN 500 4 48 7 27 17 17 3.8 24-BHSLN-L6
L 8 PN 500 6 49 8 27 19 19 4.9 24-BHSLN-L8
L 10 PN 500 8 52 10 28 22 22 6.6 24-BHSLN-L10
L 12 PN 400 10 53 10 29 24 24 7.6 24-BHSLN-L12
L 15 PN 400 12 57 12 31 27 30 12.8 24-BHSLN-L15
L 18 PN 400 15 61 13.5 32.5 32 36 19.9 24-BHSLN-L18
L 22 PN 250 19 66 16.5 34.5 36 41 24.8 24-BHSLN-L22
L 28 PN 250 24 69 18.5 35.5 41 46 33.8 24-BHSLN-L28
L 35 PN 250 30 76 18.5 36.5 50 55 53.9 24-BHSLN-L35
L 42 PN 250 36 77 19 36 60 65 75.6 24-BHSLN-L42

S 6 PN 800 4 55 12 29 19 19 6.5 24-BHSLN-S6
S 8 PN 800 5 56 13 29 22 22 8.7 24-BHSLN-S8
S 10 PN 800 7 59 14.5 29.5 24 24 11.0 24-BHSLN-S10
S 12 PN 630 8 60 14.5 30.5 27 27 13.9 24-BHSLN-S12
S 14 PN 630 10 65 17 32 30 30 17.8 24-BHSLN-S14
S 16 PN 630 12 65 16.5 31.5 32 32 19.7 24-BHSLN-S16
S 20 PN 420 16 72 17.5 33.5 41 41 34.5 24-BHSLN-S20
S 25 PN 420 20 79 20 35 46 46 49.2 24-BHSLN-S25
S 30 PN 420 25 86 21.5 37.5 50 50 61.7 24-BHSLN-S30
S 38 PN 420 32 91 22 37 65 65 108.0 24-BHSLN-S38

Bulkhead material thickness
max. 16 mm.
Example for comp. :
SV06LOMD
ISO 8434-1-BHSLN-L6-St
122
Elbow bulkhead couplings

lg2
SW2
l2
SW4
d
y
d
1
l
g
l
3
l
5
Series
Tube OD
d1
Pressure dy lg lg2 l2 l3 l5 SW2 SW4 kg/100
ca.
Order designation
L 6 PN 315 4 48 19 12 14 27 12 17 4.9 24-BHELN-L6
L 8 PN 315 6 51 21 14 17 27 12 19 6.1 24-BHELN-L8
L 10 PN 315 8 53 22 15 18 28 14 22 7.9 24-BHELN-L10
L 12 PN 315 10 56 24 17 20 29 17 24 9.6 24-BHELN-L12
L 15 PN 315 12 61 28 21 23 31 19 30 16.9 24-BHELN-L15
L 18 PN 315 15 64 31 23.5 24 32.5 24 36 25.5 24-BHELN-L18
L 22 PN 160 19 72 35 27.5 30 34.5 27 41 31.8 24-BHELN-L22
L 28 PN 160 24 77 38 30.5 34 35.5 36 46 46.2 24-BHELN-L28
L 35 PN 160 30 86 45 34.5 39 36.5 41 55 76.9 24-BHELN-L35
L 42 PN 160 36 90 51 40 43 36 50 65 112.3 24-BHELN-L42

S 6 PN 630 4 53 23 16 17 29 12 19 7.6 24-BHELN-S6
S 8 PN 630 5 54 24 17 18 29 14 22 10.2 24-BHELN-S8
S 10 PN 630 7 57 25 17.5 20 29.5 17 24 12.4 24-BHELN-S10
S 12 PN 630 8 59 29 21.5 21 30.5 17 27 16.0 24-BHELN-S12
S 14 PN 630 10 63 30 22 23 32 19 30 19.6 24-BHELN-S14
S 16 PN 400 12 64 33 24.5 24 31.5 24 32 23.8 24-BHELN-S16
S 20 PN 400 16 74 37 26.5 30 33.5 27 41 39.9 24-BHELN-S20
S 25 PN 400 20 81 42 30 34 35 36 46 60.9 24-BHELN-S25
S 30 PN 400 25 90 49 35.5 39 37.5 41 50 93.2 24-BHELN-S30
S 38 PN 315 32 96 57 41 43 37 50 65 144.9 24-BHELN-S38

Bulkhead material thickness
max. 16 mm.
Example for comp. :
WSV06LOMD
ISO 8434-1-BHELN-L6-St
123
3
Banjo and rotary couplings

125
3
Banjo couplings
Standard design
With metal sealing-edge ring for recesses
DIN 3852 / ISO 9974
d4 narrow

lg2
SW4
l
4
i
l
3
d
y
d
1
S
W
2
l2
dx
d2
d6
Series
Tube OD
d1
d2 Pressure d6 dx dy lg l2 l3 l4 SW2 SW4 i Nm
-10 %
kg/100
ca.
Order designation
LL 4 M 8 x 1 PB 100 12 3 3 14.5 10.5 8 18.5 12 12 6 10 2.0 24-BSE-LL4-M8B
LL 6 M 10 x 1 PB 100 14 4 4.5 15.5 10 9 20.5 14 14 6 15 2.7 24-BSE-LL6-M10B
LL 8 M 10 x 1 PB 100 14 4.5 6 16.5 11 10 22.5 14 14 6 15 3.1 24-BSE-LL8-M10B

L 6 M 10 x 1 PB 250 14 4 4 17.5 10.5 10 23.5 14 14 6 20 3.6 24-BSE-L6-M10B
L 8 M 12 x 1.5 PB 250 17 5.8 6 20 13 12 27 17 17 9 30 5.5 24-BSE-L8-M12B
L 10 M 14 x 1.5 PB 250 19 6.5 8 21 14 13 28 19 19 9 45 6.8 24-BSE-L10-M14B
L 12 M 16 x 1.5 PB 250 21 8.5 10 22.5 15.5 15 33 22 22 9 65 10.1 24-BSE-L12-M16B
L 12 M 18 x 1.5 PB 250 23 10.5 10 23.5 16.5 18.5 38 24 24 9 90 13.0 24-BSE-L12-M18B
L 15 M 18 x 1.5 PB 250 23 10.5 12 24.5 17.5 18.5 38 24 24 9 90 13.4 24-BSE-L15-M18B
L 18 M 22 x 1.5 PB 160 27 13 15 27.5 20 22 44 30 27 11 100 21.1 24-BSE-L18-M22B
L 22 M 26 x 1.5 PB 160 31 17 19 32.5 25 24.5 48 36 32 13 150 31.3 24-BSE-L22-M26B

S 6 M 12 x 1.5 PB 250 17 4 4 21 14 12 27 17 17 9 30 6.0 24-BSE-S6-M12B
S 8 M 14 x 1.5 PB 250 19 5 5 22 15 13 28 19 19 9 45 7.7 24-BSE-S8-M14B
S 10 M 16 x 1.5 PB 250 21 7 7 23.5 16 15 33 22 22 9 70 11.2 24-BSE-S10-M16B
S 12 M 18 x 1.5 PB 250 23 8 8 24.5 17 16.5 35 24 24 9 90 14.0 24-BSE-S12-M18B
S 14 M 18 x 1.5 PB 250 23 8 10 28 20 18.5 38 27 24 9 90 18.5 24-BSE-S14-M18B
S 14 M 20 x 1.5 PB 250 25 10 10 28 20 18.5 39 27 27 11 110 18.6 24-BSE-S14-M20B
S 16 M 22 x 1.5 PB 160 27 11 12 29.5 21 20.5 42 30 27 11 100 21.9 24-BSE-S16-M22B
S 20 M 27 x 2 PB 160 32 16 16 34.5 24 23.5 48 36 32 13 150 35.1 24-BSE-S20-M27B

SWVE06LMOMD
126
Banjo couplings
Standard design
With soft seal for recesses
DIN 3852 / ISO 9974
d4 narrow

lg2
l2
dx
d2
d7
SW4
l
4
i
l
3

d
y
S
W
2
d
1
Series
Tube OD
d1
d2 Pressure d7 dx dy lg l2 l3 l4 SW2 SW4 i Nm
-10 %
kg/100
ca.
Order designation
LL 6 M 10 x 1 PB 100 14.9 4 4.5 15.5 10 9 20.5 14 14 6 15 2.7 24-BSE-LL6-M10E
LL 8 M 10 x 1 PB 100 14.9 4.5 6 16.5 11 10 22.5 14 14 6 15 3.1 24-BSE-LL8-M10E

L 6 M 10 x 1 PB 250 14.9 4 4 17.5 10.5 10 23.5 14 14 6 20 3.6 24-BSE-L6-M10E
L 8 M 12 x 1.5 PB 250 17 5.8 6 20 13 12 27 17 17 9 30 5.5 24-BSE-L8-M12E
L 10 M 14 x 1.5 PB 250 18.9 6.5 8 21 14 13 28 19 19 9 45 6.8 24-BSE-L10-M14E
L 12 M 16 x 1.5 PB 250 21.9 8.5 10 22.5 15.5 15 33 22 22 9 65 10.1 24-BSE-L12-M16E
L 12 M 18 x 1.5 PB 250 23.9 10.5 10 23.5 16.5 18.5 38 24 24 9 90 13.0 24-BSE-L12-M18E
L 15 M 18 x 1.5 PB 250 23.9 10.5 12 24.5 17.5 18.5 38 24 24 9 90 13.4 24-BSE-L15-M18E
L 18 M 22 x 1.5 PB 160 26.9 13 15 27.5 20 22 44 30 27 11 100 21.1 24-BSE-L18-M22E
L 22 M 26 x 1.5 PB 160 31.9 17 19 32.5 25 24.5 48 36 32 13 150 31.3 24-BSE-L22-M26E

S 6 M 12 x 1.5 PB 250 17 4 4 21 14 12 27 17 17 9 30 6.0 24-BSE-S6-M12E
S 8 M 14 x 1.5 PB 250 18.9 5 5 22 15 13 28 19 19 9 45 7.7 24-BSE-S8-M14E
S 10 M 16 x 1.5 PB 250 21.9 7 7 23.5 16 15 33 22 22 9 70 11.2 24-BSE-S10-M16E
S 12 M 18 x 1.5 PB 250 23.9 8 8 24.5 17 16.5 35 24 24 9 90 14.0 24-BSE-S12-M18E
S 16 M 22 x 1.5 PB 160 26.9 11 12 29.5 21 20.5 42 30 27 11 100 21.9 24-BSE-S16-M22E
S 20 M 27 x 2 PB 160 32.9 16 16 34.5 24 23.5 48 36 32 13 150 35.1 24-BSE-S20-M27E

SWVE06LMKDSOMD
127
3
Banjo couplings
Standard design
DIN 3852 / ISO 1179
d4 narrow

lg2
SW4
l
4
i
l
3
d
y
d
1
S
W
2
l2
dx
d2
d6
Series
Tube OD
d1
d2 Pressure d6 dx dy lg2 l2 l3 l4 SW2 SW4 i Nm
-10 %
kg/100
ca.
Order designation
LL 4 G 1/8 A PB 100 14 3 3 15.5 11.5 8 18.5 14 14 6 15 2.5 24-BSE-LL4-G1/8B
LL 6 G 1/8 A PB 100 14 4 4.5 15.5 10 9 20.5 14 14 6 15 2.7 24-BSE-LL6-G1/8B
LL 8 G 1/8 A PB 100 14 4.5 6 16.5 11 10 22.5 14 14 6 15 3.1 24-BSE-LL8-G1/8B

L 6 G 1/8 A PB 250 14 4 4 17.5 10.5 10 23.5 14 14 6 20 3.5 24-BSE-L6-G1/8B
L 6 G 1/4 A PB 250 18 5.8 4 20 13 12 27 19 19 9 45 6.5 24-BSE-L6-G1/4B
L 8 G 1/4 A PB 250 18 5.8 6 20 13 12 27 19 19 9 45 6.5 24-BSE-L8-G1/4B
L 10 G 1/4 A PB 250 18 6.5 8 21 14 13 28 19 19 9 50 6.8 24-BSE-L10-G1/4B
L 12 G 3/8 A PB 250 22 8.5 10 22.5 15.5 15.5 33 22 22 9 75 10.3 24-BSE-L12-G3/8B
L 12 G 1/2 A PB 250 26 10.5 10 25 18 19 38 27 27 11 110 16.8 24-BSE-L12-G1/2B
L 15 G 3/8 A PB 250 22 9 12 24.5 17.5 18.5 38 24 24 9 75 14.4 24-BSE-L15-G3/8B
L 15 G 1/2 A PB 250 26 10.5 12 26 19 19 38 27 27 11 110 17.6 24-BSE-L15-G1/2B
L 18 G 1/2 A PB 160 26 13 15 27.5 20 22 44 30 27 11 100 20.2 24-BSE-L18-G1/2B
L 22 G 3/4 A PB 160 32 17 19 32.5 25 24 48 36 32 13 150 31.8 24-BSE-L22-G3/4B

S 6 G 1/4 A PB 250 18 4 4 22 15 12 27 19 19 9 45 7.3 24-BSE-S6-G1/4B
S 8 G 1/4 A PB 250 18 5 5 22 15 13 28 19 19 9 50 7.4 24-BSE-S8-G1/4B
S 10 G 3/8 A PB 250 22 7 7 23.5 16 15.5 33 22 22 9 70 11.1 24-BSE-S10-G3/8B
S 12 G 3/8 A PB 250 22 8 8 23.5 16 16.5 36 24 22 9 70 14.0 24-BSE-S12-G3/8B
S 14 G 1/2 A PB 250 26 10 10 28 20 19 38.5 27 27 11 115 18.4 24-BSE-S14-G1/2B
S 16 G 1/2 A PB 160 26 11 12 29.5 21 20.5 42 30 27 11 100 22.0 24-BSE-S16-G1/2B
S 20 G 3/4 A PB 160 32 16 16 34.5 24 24 48 36 32 13 150 34.6 24-BSE-S20-G3/4B

SWVE06LROMD
128
Banjo couplings
Standard design
DIN 3852 / ISO 1179
d4 narrow

lg2
l2
dx
d2
d7
SW4
l
4
i
l
3

d
y
S
W
2
d
1
Series
Tube OD
d1
-10 %
kg/100
ca.
Order designation
LL 4 G 1/8 A PB 100 14.9 3 3 15.5 11.5 8 18.5 14 14 6 15 2.5 24-BSE-LL4-G1/8E
LL 6 G 1/8 A PB 100 14.9 4 4.5 15.5 10 9 20.5 14 14 6 15 2.7 24-BSE-LL6-G1/8E
LL 8 G 1/8 A PB 100 14.9 4.5 6 16.5 11 10 22.5 14 14 6 15 3.1 24-BSE-LL8-G1/8E

L 6 G 1/8 A PB 250 14.9 4 4 17.5 10.5 10 23.5 14 14 6 20 3.5 24-BSE-L6-G1/8E
L 6 G 1/4 A PB 250 18.9 5.8 4 20 13 12 27 19 19 9 45 6.5 24-BSE-L6-G1/4E
L 8 G 1/4 A PB 250 18.9 5.8 6 20 13 12 27 19 19 9 45 6.5 24-BSE-L8-G1/4E
L 10 G 1/4 A PB 250 18.9 6.5 8 21 14 13 28 19 19 9 50 6.8 24-BSE-L10-G1/4E
L 10 G 3/8 A PB 250 21.9 8.5 8 22.5 15.5 15.5 33 22 22 9 75 10.4 24-BSE-L10-G3/8E
L 12 G 1/4 A PB 250 18.9 6.5 10 22.5 15.5 15.5 32 22 19 9 50 9.5 24-BSE-L12-G1/4E
L 12 G 3/8 A PB 250 21.9 8.5 10 22.5 15.5 15.5 33 22 22 9 75 10.3 24-BSE-L12-G3/8E
L 12 G 1/2 A PB 250 26.9 10.5 10 25 18 19 38 27 27 11 110 16.8 24-BSE-L12-G1/2E
L 15 G 3/8 A PB 250 21.9 9 12 24.5 17.5 18.5 38 24 24 9 75 14.7 24-BSE-L15-G3/8E
L 15 G 1/2 A PB 250 26.9 10.5 12 26 19 19 38 27 27 11 110 17.6 24-BSE-L15-G1/2E
L 18 G 1/2 A PB 160 26.9 13 15 27.5 20 22 44 30 27 11 100 20.2 24-BSE-L18-G1/2E
L 22 G 3/4 A PB 160 39.9 17 19 32.5 25 24 48 36 32 13 150 31.8 24-BSE-L22-G3/4E

S 6 G 1/4 A PB 250 18.9 4 4 22 15 12 27 19 19 9 45 7.3 24-BSE-S6-G1/4E
S 8 G 1/4 A PB 250 18.9 5 5 22 15 13 28 19 19 9 50 7.4 24-BSE-S8-G1/4E
S 10 G 3/8 A PB 250 21.9 7 7 23.5 16 15.5 33 22 22 9 70 11.1 24-BSE-S10-G3/8E
S 12 G 3/8 A PB 250 21.9 8 8 23.5 16 16.5 36 24 22 9 70 14.0 24-BSE-S12-G3/8E
S 14 G 1/2 A PB 250 26.9 10 10 28 20 19 38.5 27 27 11 115 18.4 24-BSE-S14-G1/2E
S 16 G 1/2 A PB 160 26.9 11 12 29.5 21 20.5 42 30 27 11 100 22.0 24-BSE-S16-G1/2E
S 20 G 3/4 A PB 160 32.9 16 16 34.5 24 24 48 36 32 13 150 34.6 24-BSE-S20-G3/4E

SWVE06LRKDSOMD
129
3
Banjo couplings
Unrestricted flow design with eccentric flow channel
With sealing-edge ring for recesses
DIN 3852 / ISO 9974
d4 narrow

lg2
SW4
l2
S
W
2
l
4
i
l
3
dx
d2
d6
d
y
d
1
Series
Tube OD
d1
-10 %
kg/100
ca.
Order designation
L 6 M 10 x 1 PB 500 14 4 4 19 12 10.5 25.3 19 14 8 30 5.1 24-BEE-L6-M10B
L 8 M 12 x 1.5 PB 400 17 6 6 21.5 14.5 14 31.5 22 17 12 42 9.5 24-BEE-L8-M12B
L 10 M 14 x 1.5 PB 350 19 8 8 22.5 15.5 14 33 22 19 12 42 9.9 24-BEE-L10-M14B
L 10 M 18 x 1.5 PB 315 23 12 8 22.5 20 18.5 42.5 30 24 12 70 20.6 24-BEE-L10-M18B
L 12 M 16 x 1.5 PB 350 21 10 10 25 18 16.5 38.5 27 22 12 60 16.3 24-BEE-L12-M16B
L 12 M 18 x 1.5 PB 315 23 12 10 27 20 18.5 42.5 30 24 12 70 20.7 24-BEE-L12-M18B
L 15 M 18 x 1.5 PB 315 23 12 12 28 21 18.5 42.5 30 24 12 70 21.6 24-BEE-L15-M18B
L 15 M 22 x 1.5 PB 315 27 15 12 29 22 21.5 47.5 36 27 14 160 29.8 24-BEE-L15-M22B
L 18 M 22 x 1.5 PB 315 27 15 15 29 21.5 21.5 47.5 36 27 14 160 29.8 24-BEE-L18-M22B
L 22 M 26 x 1.5 PB 200 31 19 19 33.5 26 24 55.5 41 32 16 140 46.4 24-BEE-L22-M26B
L 28 M 33 x 2 PB 200 39 24 24 39 31.5 30.5 68 50 41 18 350 88.3 24-BEE-L28-M33B
L 35 M 42 x 2 PB 200 49 30 30 46 35.5 35.5 78 60 50 20 500 145.6 24-BEE-L35-M42B
L 42 M 48 x 2 PB 200 55 36 36 51 40 40.5 88.5 70 60 22 600 215.4 24-BEE-L42-M48B

S 6 M 12 x 1.5 PB 500 17 4 4 23.5 16.5 14 30.5 22 17 12 57 9.9 24-BEE-S6-M12B
S 8 M 14 x 1.5 PB 450 19 5 5 23.5 16.5 14 31 22 19 12 90 10.9 24-BEE-S8-M14B
S 10 M 16 x 1.5 PB 400 21 7 7 26 18.5 16.5 37 27 22 12 100 17.0 24-BEE-S10-M16B
S 12 M 18 x 1.5 PB 400 23 8 8 28 20.5 18.5 40 30 24 12 130 22.9 24-BEE-S12-M18B
S 14 M 20 x 1.5 PB 400 25 10 10 31 23 20 43 32 27 14 160 28.5 24-BEE-S14-M20B
S 16 M 22 x 1.5 PB 400 27 12 12 31 22.5 21.5 47 36 27 14 180 32.0 24-BEE-S16-M22B
S 20 M 22 x 1.5 PB 400 27 12 16 38 27.5 25 55 46 27 14 180 58.5 24-BEE-S20-M22B
S 20 M 27 x 2 PB 400 32 16 16 38 27.5 24 55 46 36 16 300 59.6 24-BEE-S20-M27B
S 25 M 33 x 2 PB 250 39 20 20 43 31 30.5 66.5 50 41 18 380 94.8 24-BEE-S25-M33B
S 30 M 42 x 2 PB 250 49 25 25 50 36.5 35.5 75.5 60 50 20 600 154.0 24-BEE-S30-M42B
S 38 M 48 x 2 PB 250 55 32 32 57 41 40.5 86.5 70 60 22 750 231.7 24-BEE-S38-M48B

WH06LMOMD
130
Banjo couplings
DIN 3852 / ISO 9974
d4 narrow

lg2
SW4
l
4
i
dx
d2
d7
d
y
d
1
S
W
2
l2
l
3
Series
Tube OD
d1
-10 %
kg/100
ca.
Order designation
L 6 M 10 x 1 PB 500 14.9 4 4 19 12 10.5 25.3 19 14 8 30 5.1 24-BEE-L6-M10E
L 8 M 12 x 1.5 PB 400 17 6 6 21.5 14.5 14 31.5 22 17 12 42 9.4 24-BEE-L8-M12E
L 8 M 14 x 1.5 PB 350 18.9 8 6 22.5 15.5 14 33 22 19 12 42 10.3 24-BEE-L8-M14E
L 10 M 14 x 1.5 PB 350 18.9 8 8 22.5 15.5 14 33 22 19 12 42 7.9 24-BEE-L10-M14E
L 12 M 16 x 1.5 PB 350 21.9 10 10 25 18 16.5 38.5 27 22 12 60 16.3 24-BEE-L12-M16E
L 12 M 18 x 1.5 PB 315 23.9 12 10 27 20 18.5 42.5 30 24 12 70 20.5 24-BEE-L12-M18E
L 15 M 18 x 1.5 PB 315 23.9 12 12 28 21 18.5 42.5 30 24 12 70 21.6 24-BEE-L15-M18E
L 15 M 22 x 1.5 PB 315 26.9 15 12 29 22 21.5 47.5 36 27 14 160 29.7 24-BEE-L15-M22E
L 18 M 22 x 1.5 PB 315 26.9 15 15 29 21.5 21.5 47.5 36 27 14 160 29.9 24-BEE-L18-M22E
L 22 M 26 x 1.5 PB 200 31.9 19 19 33.5 26 24 55.5 41 32 16 140 46.5 24-BEE-L22-M26E
L 28 M 33 x 2 PB 200 39.9 24 24 39 31.5 30.5 68 50 41 18 350 87.8 24-BEE-L28-M33E
L 35 M 42 x 2 PB 200 49.9 30 30 46 35.5 35.5 78 60 50 20 500 147.4 24-BEE-L35-M42E
L 42 M 48 x 2 PB 200 55.9 36 36 51 40 40.5 88.5 70 60 22 600 216.9 24-BEE-L42-M48E

S 6 M 12 x 1.5 PB 500 17 4 4 23.5 16.5 14 30.5 22 17 12 57 9.9 24-BEE-S6-M12E
S 8 M 14 x 1.5 PB 450 18.9 5 5 23.5 16.5 14 31 22 19 12 90 10.9 24-BEE-S8-M14E
S 10 M 16 x 1.5 PB 400 21.9 7 7 26 18.5 16.5 37 27 22 12 100 17.4 24-BEE-S10-M16E
S 12 M 18 x 1.5 PB 400 23.9 8 8 28 20.5 18.5 40 30 24 12 130 22.9 24-BEE-S12-M18E
S 16 M 22 x 1.5 PB 400 26.9 12 12 31 22.5 21.5 47 36 27 14 180 32.0 24-BEE-S16-M22E
S 20 M 22 x 1.5 PB 400 26.9 12 16 38 27.5 25 55 46 27 14 180 48.0 24-BEE-S20-M22E
S 20 M 27 x 2 PB 400 32.9 16 16 38 27.5 24 55 46 36 16 300 59.7 24-BEE-S20-M27E
S 25 M 33 x 2 PB 250 39.9 20 20 43 31 30.5 66.5 50 41 18 380 93.4 24-BEE-S25-M33E
S 30 M 42 x 2 PB 250 49.9 25 25 50 36.5 35.5 75.5 60 50 20 600 157.3 24-BEE-S30-M42E
S 38 M 48 x 2 PB 250 55.9 32 32 57 41 40.5 86.5 70 60 22 750 232.8 24-BEE-S38-M48E

WH06LMKDSOMD
131
3
Banjo couplings
With sealing-edge ring for recesses
DIN 3852 / ISO 1179
d4 narrow

lg2
SW4
l2
S
W
2
l
4
i
l
3
dx
d2
d6
d
y
d
1
Series
Tube OD
d1
-10 %
kg/100
ca.
Order designation
L 6 G 1/8 A PB 500 14 4 4 19 12 10.5 25.3 19 14 8 25 5.0 24-BEE-L6-G1/8B
L 6 G 1/4 A PB 400 18 6 4 21.5 14.5 14 29.5 22 19 12 40 9.8 24-BEE-L6-G1/4B
L 8 G 1/4 A PB 400 18 6 6 21.5 14.5 14 31.5 22 19 12 40 10.0 24-BEE-L8-G1/4B
L 10 G 1/4 A PB 350 18 8 8 22.5 15.5 14 33 22 19 12 38 10.4 24-BEE-L10-G1/4B
L 12 G 3/8 A PB 350 22 10 10 25 18 16.5 38.5 27 22 12 75 16.5 24-BEE-L12-G3/8B
L 12 G 1/2 A PB 315 26 12 10 29 22 21.5 45.5 32 27 14 110 28.4 24-BEE-L12-G1/2B
L 15 G 1/2 A PB 315 26 12 12 29 22 21.5 45.5 32 27 14 110 28.7 24-BEE-L15-G1/2B
L 18 G 1/2 A PB 315 26 15 15 29 21.5 21.5 47.5 36 27 14 110 29.3 24-BEE-L18-G1/2B
L 22 G 3/4 A PB 200 32 19 19 36 28.5 24 56.5 46 36 16 160 56.3 24-BEE-L22-G3/4B
L 28 G 1 A PB 200 39 24 24 39 31.5 30.5 68 50 41 18 270 88.1 24-BEE-L28-G1B
L 35 G 1 1/4 A PB 200 49 30 30 46 35.5 35.5 78 60 50 20 500 147.9 24-BEE-L35-G11/4B
L 42 G 1 1/2 A PB 200 55 36 36 51 40 40.5 88.5 70 60 22 600 218.6 24-BEE-L42-G11/2B

S 6 G 1/4 A PB 500 18 4 4 23.5 16.5 14 30.5 22 19 12 53 10.3 24-BEE-S6-G1/4B
S 8 G 1/4 A PB 450 18 5 5 23.5 16.5 14 31 22 19 12 53 10.6 24-BEE-S8-G1/4B
S 10 G 3/8 A PB 400 22 7 7 26 18.5 16.5 37 27 22 12 120 17.3 24-BEE-S10-G3/8B
S 12 G 3/8 A PB 400 22 8 8 26 18.5 16.5 37.5 27 22 12 120 17.8 24-BEE-S12-G3/8B
S 14 G 1/2 A PB 400 26 10 10 31 23 21.5 43 32 27 14 160 29.1 24-BEE-S14-G1/2B
S 16 G 1/2 A PB 400 26 12 12 31 22.5 21.5 47 36 27 14 160 31.5 24-BEE-S16-G1/2B
S 20 G 3/4 A PB 400 32 16 16 38 27.5 24 55 46 36 16 330 59.4 24-BEE-S20-G3/4B
S 25 G 1 A PB 250 39 20 20 43 31 30.5 66.5 50 41 18 380 93.2 24-BEE-S25-G1B
S 30 G 1 1/4 A PB 250 49 25 25 50 36.5 35.5 75.5 60 50 20 600 156.7 24-BEE-S30-G11/4B
S 38 G 1 1/2 A PB 250 55 32 32 57 41 40.5 86.5 70 60 22 800 232.3 24-BEE-S38-G11/2B

WH06LROMD
132
Banjo couplings
DIN 3852 / ISO 1179
d4 narrow

lg2
SW4
l
4
i
dx
d2
d7
d
y
d
1
S
W
2
l2
l
3
Series
Tube OD
d1
-10 %
kg/100
ca.
Order designation
L 6 G 1/8 A PB 500 14.9 4 4 19 12 10.5 25.3 19 14 8 25 5.0 24-BEE-L6-G1/8E
L 6 G 1/4 A PB 400 18.9 6 4 21.5 14.5 14 31.5 22 19 12 40 9.7 24-BEE-L6-G1/4E
L 8 G 1/4 A PB 400 18.9 6 6 21.5 14.5 14 31.5 22 19 12 40 9.8 24-BEE-L8-G1/4E
L 10 G 1/4 A PB 350 18.9 8 8 22.5 15.5 14 33 22 19 12 38 10.1 24-BEE-L10-G1/4E
L 10 G 3/8 A PB 350 21.9 10 8 22.5 18 16.5 38.5 27 22 12 75 16.4 24-BEE-L10-G3/8E
L 12 G 1/4 A PB 350 21.9 8 10 25 18 16.5 37 27 22 12 75 14.6 24-BEE-L12-G1/4E
L 12 G 3/8 A PB 350 21.9 10 10 25 18 16.5 38.5 27 22 12 75 16.2 24-BEE-L12-G3/8E
L 12 G 1/2 A PB 315 30 12 10 29 22 21.5 45.5 32 27 14 110 27.7 24-BEE-L12-G1/2E
L 15 G 1/2 A PB 315 26.9 12 12 29 22 21.5 45.5 32 27 14 110 28.4 24-BEE-L15-G1/2E
L 18 G 1/2 A PB 315 26.9 15 15 29 21.5 21.5 47.5 36 27 14 110 29.6 24-BEE-L18-G1/2E
L 22 G 3/4 A PB 200 32.9 19 19 36 28.5 24 56.5 46 36 16 160 56.8 24-BEE-L22-G3/4E
L 28 G 1 A PB 200 39.9 24 24 39 31.5 30.5 68 50 41 18 270 86.6 24-BEE-L28-G1E
L 35 G 1 1/4 A PB 200 49.9 30 30 46 35.5 35.5 78 60 50 20 500 146.6 24-BEE-L35-G11/4E
L 42 G 1 1/2 A PB 200 55.9 36 36 51 40 40.5 88.5 70 60 22 600 214.5 24-BEE-L42-G11/2E

S 6 G 1/4 A PB 500 18.9 4 4 23.5 16.5 14 30.5 22 19 12 53 10.4 24-BEE-S6-G1/4E
S 8 G 1/4 A PB 450 18.9 5 5 23.5 16.5 14 31 22 19 12 53 10.5 24-BEE-S8-G1/4E
S 10 G 3/8 A PB 400 21.9 7 7 26 18.5 16.5 37 27 22 12 120 17.3 24-BEE-S10-G3/8E
S 12 G 3/8 A PB 400 21.9 8 8 26 18.5 16.5 37.5 27 22 12 120 17.5 24-BEE-S12-G3/8E
S 14 G 1/2 A PB 400 26.9 10 10 31 23 21.5 44 32 27 14 160 29.5 24-BEE-S14-G1/2E
S 16 G 1/2 A PB 400 26.9 12 12 31 22.5 21.5 47 36 27 14 160 31.2 24-BEE-S16-G1/2E
S 20 G 3/4 A PB 400 32.9 16 16 38 27.5 24 55 46 36 16 330 59.4 24-BEE-S20-G3/4E
S 25 G 1 A PB 250 39.9 20 20 43 31 30.5 66.5 50 41 18 380 93.8 24-BEE-S25-G1E
S 30 G 1 1/4 A PB 250 49.9 25 25 50 36.5 35.5 75.5 60 50 20 600 155.2 24-BEE-S30-G11/4E
S 38 G 1 1/2 A PB 250 55.9 32 32 57 41 40.5 86.5 70 60 22 800 231.1 24-BEE-S38-G11/2E

WH06LRKDSOMD
133
3
Banjo couplings
Compact design - high-pressure
DIN 3852 / ISO 9974
d4 narrow

lg2
SW4
dx
d2
d6
l
4
l
3
i
d
y
d
1
l2
S
W
2
Series
Tube OD
d1
-10 %
kg/100
ca.
Order designation
L 6 M 10 x 1 PB 500 14 4 4 20 13 10 21 14 14 8 25 3.6 24-BCE-L6-M10B
L 8 M 12 x 1.5 PB 500 17 5 6 21 14 13.5 27 19 19 10 50 7.5 24-BCE-L8-M12B
L 10 M 14 x 1.5 PB 500 19 5 8 22 15 13.5 27 19 19 10 60 8.2 24-BCE-L10-M14B
L 12 M 16 x 1.5 PB 400 21 8 10 24.5 17.5 16 32.5 24 22 10 80 12.4 24-BCE-L12-M16B
L 12 M 18 x 1.5 PB 315 23 8 10 27 20 18.5 36 24 22 10 100 14.2 24-BCE-L12-M18B
L 15 M 18 x 1.5 PB 400 23 9.5 12 27 20 18.5 37 27 24 10 100 19.2 24-BCE-L15-M18B
L 18 M 22 x 1.5 PB 400 27 11 15 28 20.5 21.5 43 30 27 12 140 27.9 24-BCE-L18-M22B
L 22 M 26 x 1.5 PB 250 31 15 19 34.5 27 24 48 36 32 16 180 42.0 24-BCE-L22-M26B
L 28 M 33 x 2 PB 250 39 19 24 39 31.5 30.5 59 46 41 18 380 86.0 24-BCE-L28-M33B
L 35 M 42 x 2 PB 250 49 24 30 46 35.5 35.5 70 55 50 20 500 145.7 24-BCE-L35-M42B
L 42 M 48 x 2 PB 250 55 31 36 51 40 40.5 80 65 55 22 600 219.2 24-BCE-L42-M48B

S 6 M 12 x 1.5 PB 500 17 5 4 23 16 13.5 27 19 19 10 50 7.9 24-BCE-S6-M12B
S 8 M 14 x 1.5 PB 500 19 5 5 23 16 13.5 27 19 19 10 60 8.9 24-BCE-S8-M14B
S 10 M 16 x 1.5 PB 500 21 8 7 25.5 18 16 32.5 24 22 10 80 13.1 24-BCE-S10-M16B
S 12 M 18 x 1.5 PB 400 23 9.5 8 27 19.5 18.5 37 27 24 10 110 19.5 24-BCE-S12-M18B
S 16 M 22 x 1.5 PB 400 27 11 12 30 21.5 21.5 43 30 27 12 140 28.2 24-BCE-S16-M22B
S 20 M 27 x 2 PB 315 32 15 16 36.5 26 24 48 36 32 16 300 45.4 24-BCE-S20-M27B
S 25 M 33 x 2 PB 250 39 19 20 43 31 30.5 59 46 41 18 380 85.9 24-BCE-S25-M33B
S 30 M 42 x 2 PB 250 49 24 25 50 36.5 35.5 70 55 50 20 600 144.7 24-BCE-S30-M42B
S 38 M 48 x 2 PB 250 55 31 32 57 41 40.5 80 65 55 22 700 232.0 24-BCE-S38-M48B

Standard size
134
Banjo couplings
DIN 3852 / ISO 9974
d4 narrow

S
W
2
l2
lg2
SW4
d
y
d
1
l
4

l
3
i
dx
d2
d7
Series
Tube OD
d1
-10 %
kg/100
ca.
Order designation
L 6 M 10 x 1 PB 500 14.9 4 4 20 13 10 21 14 14 8 25 3.6 24-BCE-L6-M10E
L 8 M 12 x 1.5 PB 500 17.9 5 6 21 14 13.5 27 19 19 10 50 7.5 24-BCE-L8-M12E
L 10 M 14 x 1.5 PB 500 19.9 5 8 22 15 13.5 27 19 19 10 60 8.2 24-BCE-L10-M14E
L 12 M 16 x 1.5 PB 400 21.9 8 10 24.5 17.5 16 32.5 24 22 10 80 12.4 24-BCE-L12-M16E
L 12 M 18 x 1.5 PB 315 23.9 8 10 27 20 18.5 36 24 22 10 100 14.2 24-BCE-L12-M18E
L 15 M 18 x 1.5 PB 400 23.9 9.5 12 27 20 18.5 37 27 24 10 100 19.2 24-BCE-L15-M18E
L 18 M 22 x 1.5 PB 400 27.9 11 15 28 20.5 21.5 43 30 27 12 140 27.9 24-BCE-L18-M22E
L 22 M 26 x 1.5 PB 250 31.9 15 19 34.5 27 24 48 36 32 16 180 42.0 24-BCE-L22-M26E
L 28 M 33 x 2 PB 250 39.9 19 24 39 31.5 30.5 59 46 41 18 380 86.0 24-BCE-L28-M33E
L 35 M 42 x 2 PB 250 49.9 24 30 46 35.5 35.5 70 55 50 20 500 145.7 24-BCE-L35-M42E
L 42 M 48 x 2 PB 250 55.9 31 36 51 40 40.5 80 65 55 22 600 219.2 24-BCE-L42-M48E

S 6 M 12 x 1.5 PB 500 17.9 5 4 23 16 13.5 27 19 19 10 50 7.9 24-BCE-S6-M12E
S 8 M 14 x 1.5 PB 500 19.9 5 5 23 16 13.5 27 19 19 10 60 8.9 24-BCE-S8-M14E
S 10 M 16 x 1.5 PB 500 21.9 8 7 25.5 18 16 32.5 24 22 10 80 13.1 24-BCE-S10-M16E
S 12 M 18 x 1.5 PB 400 23.9 9.5 8 27 19.5 18.5 37 27 24 10 110 19.5 24-BCE-S12-M18E
S 16 M 22 x 1.5 PB 400 27.9 11 12 30 21.5 21.5 43 30 27 12 140 28.2 24-BCE-S16-M22E
S 20 M 27 x 2 PB 315 32.9 15 16 36.5 26 24 48 36 32 16 300 45.4 24-BCE-S20-M27E
S 25 M 33 x 2 PB 250 39.9 19 20 43 31 30.5 59 46 41 18 380 85.9 24-BCE-S25-M33E
S 30 M 42 x 2 PB 250 49.9 24 25 50 36.5 35.5 70 55 50 20 600 144.7 24-BCE-S30-M42E
S 38 M 48 x 2 PB 250 55.9 31 32 57 41 40.5 80 65 55 22 700 232.0 24-BCE-S38-M48E

Standard size
135
3
Banjo couplings
DIN 3852 / ISO 1179
d4 narrow

lg2
SW4
dx
d2
d6
l
4
l
3
i
d
y
d
1
l2
S
W
2
Series
Tube OD
d1
-10 %
kg/100
ca.
Order designation
L 6 G 1/8 A PB 500 14 4 4 20 13 10 21 14 14 8 25 5.9 24-BCE-L6-G1/8B
L 6 G 1/4 A PB 500 18 5 4 22 15 13.5 27 19 19 10 45 5.9 24-BCE-L6-G1/4B
L 8 G 1/4 A PB 500 18 5 6 21 14 13.5 27 19 19 10 45 9.3 24-BCE-L8-G1/4B
L 10 G 1/4 A PB 500 18 5 8 22 15 13.5 27 19 19 10 45 10.2 24-BCE-L10-G1/4B
L 12 G 1/4 A PB 400 18 5 10 22 15 15.5 30 22 19 10 45 15.8 24-BCE-L12-G1/4B
L 12 G 3/8 A PB 400 22 8 10 24.5 17.5 16 32.5 24 22 10 75 15.9 24-BCE-L12-G3/8B
L 15 G 1/2 A PB 400 26 11 12 28 21 21.5 43 30 27 12 110 28.4 24-BCE-L15-G1/2B
L 18 G 1/2 A PB 400 26 11 15 28 20.5 21.5 43 30 27 12 110 32.0 24-BCE-L18-G1/2B
L 22 G 3/4 A PB 250 32 15 19 34.5 27 24 48 36 32 16 210 48.5 24-BCE-L22-G3/4B
L 28 G 1 A PB 250 39 19 24 39 31.5 30.5 59 46 41 18 380 88.2 24-BCE-L28-G1B
L 35 G 1 1/4 A PB 250 49 24 30 46 35.5 35.5 70 55 50 20 500 150.8 24-BCE-L35-G11/4B
L 42 G 1 1/2 A PB 250 55 31 36 51 40 40.5 80 65 55 22 650 234.1 24-BCE-L42-G11/2B

S 6 G 1/4 A PB 500 18 5 4 23 16 13.5 27 19 19 10 50 8.7 24-BCE-S6-G1/4B
S 8 G 1/4 A PB 500 18 5 5 23 16 13.5 27 19 19 10 50 10.3 24-BCE-S8-G1/4B
S 10 G 3/8 A PB 500 22 8 7 25.5 18 16 32.5 24 22 10 80 17.0 24-BCE-S10-G3/8B
S 12 G 3/8 A PB 400 22 8 8 25.5 18 16 32.5 24 22 10 80 17.9 24-BCE-S12-G3/8B
S 14 G 1/2 A PB 400 26 11 10 30 22 19.5 41 30 27 12 160 30.3 24-BCE-S14-G1/2B
S 16 G 1/2 A PB 400 26 11 12 30 21.5 21.5 43 30 27 12 160 31.6 24-BCE-S16-G1/2B
S 20 G 3/4 A PB 315 32 15 16 36.5 26 24 48 36 32 16 250 51.8 24-BCE-S20-G3/4B
S 25 G 1 A PB 250 39 19 20 43 31 30.5 59 46 41 18 380 103.0 24-BCE-S25-G1B
S 30 G 1 1/4 A PB 250 49 24 25 50 36.5 35.5 70 55 50 20 600 163.7 24-BCE-S30-G11/4B
S 38 G 1 1/2 A PB 250 55 31 32 57 41 40.5 80 65 55 22 700 262.7 24-BCE-S38-G11/2B

Standard size
136
Banjo couplings
DIN 3852 / ISO 1179
d4 narrow

S
W
2
l2
lg2
SW4
d
y
d
1
l
4

l
3
i
dx
d2
d7
Series
Tube OD
d1
-10 %
kg/100
ca.
Order designation
L 6 G 1/8 A PB 500 14.9 4 4 20 13 10 21 14 14 8 25 5.9 24-BCE-L6-G1/8E
L 6 G 1/4 A PB 500 18.9 5 4 22 15 13.5 27 19 19 10 45 5.9 24-BCE-L6-G1/4E
L 8 G 1/4 A PB 500 18.9 5 6 21 14 13.5 27 19 19 10 45 9.3 24-BCE-L8-G1/4E
L 10 G 1/4 A PB 500 18.9 5 8 22 15 13.5 27 19 19 10 45 10.2 24-BCE-L10-G1/4E
L 12 G 1/4 A PB 400 18.9 5 10 22 15 15.5 30 22 19 10 45 15.8 24-BCE-L12-G1/4E
L 12 G 3/8 A PB 400 21.9 8 10 24.5 17.5 16 32.5 24 22 10 75 15.9 24-BCE-L12-G3/8E
L 15 G 1/2 A PB 400 26.9 11 12 28 21 21.5 43 30 27 12 110 28.4 24-BCE-L15-G1/2E
L 18 G 1/2 A PB 400 26.9 11 15 28 20.5 21.5 43 30 27 12 110 32.0 24-BCE-L18-G1/2E
L 22 G 3/4 A PB 250 32.9 15 19 34.5 27 24 48 36 32 16 210 48.5 24-BCE-L22-G3/4E
L 28 G 1 A PB 250 39.9 19 24 39 31.5 30.5 59 46 41 18 380 88.2 24-BCE-L28-G1E
L 35 G 1 1/4 A PB 250 49.9 24 30 46 35.5 35.5 70 55 50 20 500 150.8 24-BCE-L35-G11/4E
L 42 G 1 1/2 A PB 250 55.9 31 36 51 40 40.5 80 65 55 22 650 234.1 24-BCE-L42-G11/2E

S 6 G 1/4 A PB 500 18.9 5 4 23 16 13.5 27 19 19 10 50 8.7 24-BCE-S6-G1/4E
S 8 G 1/4 A PB 500 18.9 5 5 23 16 13.5 27 19 19 10 50 10.3 24-BCE-S8-G1/4E
S 10 G 3/8 A PB 500 21.9 8 7 25.5 18 16 32.5 24 22 10 80 17.0 24-BCE-S10-G3/8E
S 12 G 3/8 A PB 400 21.9 8 8 25.5 18 16 32.5 24 22 10 80 17.9 24-BCE-S12-G3/8E
S 14 G 1/2 A PB 400 26.9 11 10 30 22 19.5 41 30 27 12 160 30.3 24-BCE-S14-G1/2E
S 16 G 1/2 A PB 400 26.9 11 12 30 21.5 21.5 43 30 27 12 160 31.6 24-BCE-S16-G1/2E
S 20 G 3/4 A PB 315 32.9 15 16 36.5 26 24 48 36 32 16 250 51.8 24-BCE-S20-G3/4E
S 25 G 1 A PB 250 39.9 19 20 43 31 30.5 59 46 41 18 380 103.0 24-BCE-S25-G1E
S 30 G 1 1/4 A PB 250 49.9 24 25 50 36.5 35.5 70 55 50 20 600 163.7 24-BCE-S30-G11/4E
S 38 G 1 1/2 A PB 250 55.9 31 32 57 41 40.5 80 65 55 22 700 262.7 24-BCE-S38-G11/2E

Standard size
137
3
T banjo couplings
DIN 3852 / ISO 9974
d4 narrow

SW4
dx
l2
d2
d7
d
y
l
4
i
l
3
d
1
S
W
2
lg2
Series
Tube OD
d1
-10 %
kg/100
ca.
Order designation
L 6 M 10 x 1 PB 500 14.9 4 4 40 13 10 21 14 14 8 25 4.9 24-BCT-L6-M10E
L 8 M 12 x 1.5 PB 500 17.9 5 6 42 14 13.5 27 19 19 10 50 8.7 24-BCT-L8-M12E
L 10 M 14 x 1.5 PB 500 19.9 5 8 44 15 13.5 27 19 19 10 60 9.5 24-BCT-L10-M14E
L 12 M 16 x 1.5 PB 400 21.9 8 10 49 17.5 16 32.5 24 22 10 80 15.6 24-BCT-L12-M16E
L 12 M 18 x 1.5 PB 315 23.9 8 10 54 20 18.5 36 24 22 10 100 24.1 24-BCT-L12-M18E
L 15 M 18 x 1.5 PB 400 23.9 9.5 12 54 20 18.5 37 27 24 10 100 21.7 24-BCT-L15-M18E
L 18 M 22 x 1.5 PB 400 27.9 11 15 56 20.5 21.5 43 30 27 12 140 30.3 24-BCT-L18-M22E
L 22 M 26 x 1.5 PB 250 31.9 15 19 69 27 24 48 36 32 16 180 47.2 24-BCT-L22-M26E
L 28 M 33 x 2 PB 250 39.9 19 24 78 31.5 30.5 59 46 41 18 380 90.1 24-BCT-L28-M33E
L 35 M 42 x 2 PB 250 49.9 24 30 92 35.5 35.5 70 55 50 20 500 153.5 24-BCT-L35-M42E
L 42 M 48 x 2 PB 250 55.9 31 36 102 40 40.5 80 65 55 22 600 218.8 24-BCT-L42-M48E

S 6 M 12 x 1.5 PB 500 17.9 5 4 46 16 13.5 27 19 19 10 50 9.8 24-BCT-S6-M12E
S 8 M 14 x 1.5 PB 500 19.9 5 5 46 16 13.5 27 19 19 10 60 10.8 24-BCT-S8-M14E
S 10 M 16 x 1.5 PB 500 21.9 8 7 51 18 16 32.5 24 22 10 80 16.9 24-BCT-S10-M16E
S 12 M 18 x 1.5 PB 400 23.9 9.5 8 54 19.5 18.5 37 27 24 10 110 22.2 24-BCT-S12-M18E
S 16 M 22 x 1.5 PB 400 27.9 11 12 60 21.5 21.5 43 30 27 12 140 31.2 24-BCT-S16-M22E
S 20 M 27 x 2 PB 315 32.9 15 16 73 26 24 48 36 32 16 300 51.2 24-BCT-S20-M27E
S 25 M 33 x 2 PB 250 39.9 19 20 86 31 30.5 59 46 41 18 380 95.2 24-BCT-S25-M33E
S 30 M 42 x 2 PB 250 49.9 24 25 100 36.5 35.5 70 55 50 20 600 157.8 24-BCT-S30-M42E
S 38 M 48 x 2 PB 250 55.9 31 32 114 41 40.5 80 65 55 22 700 239.0 24-BCT-S38-M48E

Standard size
138
T banjo couplings
DIN 3852 / ISO 1179
d4 narrow

SW4
dx
l2
d2
d7
d
y
l
4
i
l
3
d
1
S
W
2
lg2
Series
Tube OD
d1
-10 %
kg/100
ca.
Order designation
L 6 G 1/8 A PB 500 14.9 4 4 40 13 10 21 14 14 8 25 4.8 24-BCT-L6-G1/8E
L 8 G 1/4 A PB 500 18.9 5 6 42 14 13.5 27 19 19 10 45 9.0 24-BCT-L8-G1/4E
L 10 G 1/4 A PB 500 18.9 5 8 44 15 13.5 27 19 19 10 45 9.2 24-BCT-L10-G1/4E
L 12 G 3/8 A PB 400 21.9 8 10 49 17.5 16 32.5 24 22 10 75 15.4 24-BCT-L12-G3/8E
L 15 G 1/2 A PB 400 26.9 11 12 56 21 21.5 43 30 27 12 110 28.7 24-BCT-L15-G1/2E
L 18 G 1/2 A PB 400 26.9 11 15 56 20.5 21.5 43 30 27 12 110 29.4 24-BCT-L18-G1/2E
L 22 G 3/4 A PB 250 32.9 15 19 69 27 24 48 36 32 16 210 49.2 24-BCT-L22-G3/4E
L 28 G 1 A PB 250 39.9 19 24 78 31.5 30.5 59 46 41 18 380 89.9 24-BCT-L28-G1E
L 35 G 1 1/4 A PB 250 49.9 24 30 92 35.5 35.5 70 55 50 20 500 152.9 24-BCT-L35-G11/4E
L 42 G 1 1/2 A PB 250 55.9 31 36 102 40 40.5 80 65 55 22 650 218.8 24-BCT-L42-G11/2E

S 6 G 1/4 A PB 500 18.9 5 4 46 16 13.5 27 19 19 10 50 10.0 24-BCT-S6-G1/4E
S 8 G 1/4 A PB 500 18.9 5 5 46 16 13.5 27 19 19 10 50 10.5 24-BCT-S8-G1/4E
S 10 G 3/8 A PB 500 21.9 8 7 51 18 16 32.5 24 22 10 80 16.7 24-BCT-S10-G3/8E
S 12 G 3/8 A PB 400 21.9 8 8 51 18 16 32.5 24 22 10 80 17.2 24-BCT-S12-G3/8E
S 14 G 1/2 A PB 400 26.9 11 10 60 22 19.5 41 30 27 12 160 29.4 24-BCT-S14-G1/2E
S 16 G 1/2 A PB 400 26.9 11 12 60 21.5 21.5 43 30 27 12 160 30.3 24-BCT-S16-G1/2E
S 20 G 3/4 A PB 315 32.9 15 16 73 26 24 48 36 32 16 250 51.1 24-BCT-S20-G3/4E
S 25 G 1 A PB 250 39.9 19 20 86 31 30.5 59 46 41 18 380 95.0 24-BCT-S25-G1E
S 30 G 1 1/4 A PB 250 49.9 24 25 100 36.5 35.5 70 55 50 20 600 157.3 24-BCT-S30-G11/4E
S 38 G 1 1/2 A PB 250 55.9 31 32 114 41 40.5 80 65 55 22 700 239.0 24-BCT-S38-G11/2E

Standard size
139
3
Rotary couplings
Sealed with PEFLEX profile seal ring
Design version: of square bar steel

lg2
l2
d
y
d
1
SW1
dx
d2
d7
i
l
4
l
3
SW2
Series
Tube OD
d1
-10 %
kg/100
ca.
Order designation
L 6 M 10 x 1 PB 100 14.9 4 4 23.5 16.5 26.5 47 22 27 8 25 18.1 24-RCE-L6-M10E-C10
L 8 M 12 x 1.5 PB 100 16.9 6 6 23.5 16.5 26.5 47 22 27 12 35 18.4 24-RCE-L8-M12E-C10
L 10 M 14 x 1.5 PB 100 18.9 7 8 24.5 17.5 26.5 47 22 27 12 50 19.3 24-RCE-L10-M14E-C10
L 12 M 16 x 1.5 PB 100 21.9 9 8 24.5 17.5 26.5 47 22 27 12 80 18.9 24-RCE-L12-M16E-C10
L 15 M 18 x 1.5 PB 100 23.9 11 12 30.5 23.5 33.5 58.5 27 36 12 100 40.8 24-RCE-L15-M18E-C10
L 15 M 22 x 1.5 PB 100 26.9 14 12 30.5 23.5 33.5 58.5 27 36 14 160 41.3 24-RCE-L15-M22E-C10
L 18 M 22 x 1.5 PB 100 26.9 14 13 30.5 23 33.5 58.5 27 36 14 160 41.0 24-RCE-L18-M22E-C10
L 22 M 26 x 1.5 PB 100 31.9 17 18 34.5 27 38 65.5 32 41 16 220 54.3 24-RCE-L22-M26E-C10
L 28 M 33 x 2 PB 100 39.9 22 22 37 29.5 42.5 72 41 46 18 300 78.4 24-RCE-L28-M33E-C10

S 6 M 12 x 1.5 PB 400 16.9 4 4 25.5 18.5 26.5 47 22 27 12 50 20.0 24-RCE-S6-M12E-C10
S 8 M 14 x 1.5 PB 400 18.9 5 5 26 18.5 26.5 47 22 27 12 60 20.3 24-RCE-S8-M14E-C10
S 10 M 16 x 1.5 PB 400 21.9 7 7 25.5 18 26.5 47 22 27 12 100 20.3 24-RCE-S10-M16E-C10
S 12 M 18 x 1.5 PB 400 23.9 8 8 30.5 23 33.5 58.5 27 36 12 120 42.7 24-RCE-S12-M18E-C10
S 14 M 20 x 1.5 PB 400 25.9 10 10 33 25 33.5 58.5 27 36 14 170 43.2 24-RCE-S14-M20E-C10
S 16 M 22 x 1.5 PB 400 26.9 12 12 33 24.5 33.5 58.5 27 36 14 190 42.9 24-RCE-S16-M22E-C10
S 20 M 27 x 2 PB 400 32.9 16 16 36.5 26 38 65.5 32 41 16 300 56.8 24-RCE-S20-M27E-C10
S 25 M 33 x 2 PB 250 39.9 20 20 41 29 42.5 72 41 46 18 450 79.0 24-RCE-S25-M33E-C10

Standard size These couplings are designed for slow
rotary and swivelling motions
of angles up to 360 and
temperatures of up to 70 C.
Example for comp. :
DVWE06LMOMD
140
Rotary couplings
Design version: of square bar steel

lg2
l2
d
y
d
1
SW1
dx
d2
d7
i
l
4
l
3
SW2
Series
Tube OD
d1
-10 %
kg/100
ca.
Order designation
L 6 G 1/8 A PB 100 13.9 4 4 23.5 16.5 26.5 47 22 27 8 25 18.9 24-RCE-L6-G1/8E-C10
L 8 G 1/4 A PB 100 18.9 6 6 23.5 16.5 26.5 47 22 27 12 50 19.4 24-RCE-L8-G1/4E-C10
L 10 G 1/4 A PB 100 18.9 7 8 24.5 17.5 26.5 47 22 27 12 50 18.9 24-RCE-L10-G1/4E-C10
L 12 G 3/8 A PB 100 21.9 9 8 24.5 17.5 26.5 47 22 27 12 80 18.9 24-RCE-L12-G3/8E-C10
L 15 G 1/2 A PB 100 26.9 11 12 30.5 23.5 33.5 58.5 27 36 14 170 41.8 24-RCE-L15-G1/2E-C10
L 18 G 1/2 A PB 100 26.9 14 13 30.5 23 33.5 58.5 27 36 14 170 40.4 24-RCE-L18-G1/2E-C10
L 22 G 3/4 A PB 100 31.9 17 18 34.5 27 38 65.5 32 41 16 240 55.1 24-RCE-L22-G3/4E-C10
L 28 G 1 A PB 100 39.9 22 22 37 29.5 42.5 72 41 46 18 370 77.3 24-RCE-L28-G1E-C10

S 6 G 1/4 A PB 400 18.9 4 4 25.5 18.5 26.5 47 22 27 12 60 20.0 24-RCE-S6-G1/4E-C10
S 8 G 1/4 A PB 400 18.9 5 5 26 18.5 26.5 47 22 27 12 60 20.3 24-RCE-S8-G1/4E-C10
S 10 G 3/8 A PB 400 21.9 7 7 25.5 18 26.5 47 22 27 12 110 20.7 24-RCE-S10-G3/8E-C10
S 12 G 3/8 A PB 400 21.9 8 8 30.5 23 33.5 58.5 27 36 12 110 42.4 24-RCE-S12-G3/8E-C10
S 14 G 1/2 A PB 400 26.9 10 10 33 25 33.5 58.5 27 36 14 200 43.7 24-RCE-S14-G1/2E-C10
S 16 G 1/2 A PB 400 26.9 12 12 33 24.5 33.5 58.5 27 36 14 200 42.4 24-RCE-S16-G1/2E-C10
S 20 G 3/4 A PB 400 31.9 16 16 36.5 26 38 65.5 32 41 16 320 57.4 24-RCE-S20-G3/4E-C10
S 25 G 1 A PB 250 39.9 20 20 41 29 42.5 72 41 46 18 500 98.0 24-RCE-S25-G1E-C10

These couplings are designed for slow
rotary and swivelling motions
of angles up to 360 and
temperatures of up to 70 C.
Example for comp. :
DVWE06LROMD
141
3
Adjustable couplings with tube socket, plug-in
version

143
3
Adjustable elbow couplings
Plug-in version
Tube socket pre-assembled

lg2
l2
SW2
SW3
d
y
d
1
l
5
Series
Tube OD
d1
Pressure dy lg2 l2 l5 SW2 SW3 kg/100
ca.
Order designation
L 6 PN 315 4 19 12 26 12 14 2.8 24-SWE-L6
L 8 PN 315 6 21 14 27.5 12 17 3.8 24-SWE-L8
L 10 PN 315 8 22 15 29 14 19 5.0 24-SWE-L10
L 12 PN 315 10 24 17 29.5 17 22 6.6 24-SWE-L12
L 15 PN 315 12 28 21 32.5 19 27 11.5 24-SWE-L15
L 18 PN 315 15 31 23.5 35.5 24 32 17.8 24-SWE-L18
L 22 PN 160 19 35 27.5 38.5 27 36 23.5 24-SWE-L22
L 28 PN 160 24 38 30.5 41.5 36 41 34.1 24-SWE-L28
L 35 PN 160 30 45 34.5 51 41 50 57.7 24-SWE-L35
L 42 PN 160 36 51 40 56 50 60 87.2 24-SWE-L42

S 6 PN 630 4 23 16 27 12 17 4.4 24-SWE-S6
S 8 PN 630 5 24 17 27.5 14 19 5.9 24-SWE-S8
S 10 PN 630 7 25 17.5 30 17 22 8.3 24-SWE-S10
S 12 PN 630 8 29 21.5 31 17 24 10.5 24-SWE-S12
S 14 PN 630 10 30 22 35 19 27 14.6 24-SWE-S14
S 16 PN 400 12 33 24.5 36.5 24 30 19.9 24-SWE-S16
S 20 PN 400 16 37 26.5 44.5 27 36 29.4 24-SWE-S20
S 25 PN 400 20 42 30 50 36 46 54.1 24-SWE-S25
S 30 PN 400 25 49 35.5 55 41 50 76.2 24-SWE-S30
S 38 PN 315 32 57 41 63 50 60 118.9 24-SWE-S38

Example for comp. :
EVW06LOMD
144
Adjustable T couplings
Plug-in version

lg
lg2
l2 SW2
SW3
d
y
d
1
l
5
Series
Tube OD
d1
Pressure dy lg lg2 l2 l5 SW2 SW3 kg/100
ca.
Order designation
L 6 PN 315 4 38 19 12 26 12 14 3.8 24-SWT-L6
L 8 PN 315 6 42 21 14 27.5 12 17 4.8 24-SWT-L8
L 10 PN 315 8 44 22 15 29 14 19 6.0 24-SWT-L10
L 12 PN 315 10 48 24 17 29.5 17 22 7.9 24-SWT-L12
L 15 PN 315 12 56 28 21 32.5 19 27 14.2 24-SWT-L15
L 18 PN 315 15 62 31 23.5 35.5 24 32 21.1 24-SWT-L18
L 22 PN 160 19 70 35 27.5 38.5 27 36 27.8 24-SWT-L22
L 28 PN 160 24 76 38 30.5 41.5 36 41 38.6 24-SWT-L28
L 35 PN 160 30 90 45 34.5 51 41 50 66.0 24-SWT-L35
L 42 PN 160 36 102 51 40 56 50 60 101.8 24-SWT-L42

S 6 PN 630 4 46 23 16 27 12 17 5.8 24-SWT-S6
S 8 PN 630 5 48 24 17 27.5 14 19 7.6 24-SWT-S8
S 10 PN 630 7 50 25 17.5 30 17 22 10.3 24-SWT-S10
S 12 PN 630 8 58 29 21.5 31 17 24 13.5 24-SWT-S12
S 14 PN 630 10 60 30 22 35 19 27 17.9 24-SWT-S14
S 16 PN 400 12 66 33 24.5 36.5 24 30 24.1 24-SWT-S16
S 20 PN 400 16 74 37 26.5 44.5 27 36 34.8 24-SWT-S20
S 25 PN 400 20 84 42 30 50 36 46 63.0 24-SWT-S25
S 30 PN 400 25 98 49 35.5 55 41 50 90.8 24-SWT-S30
S 38 PN 315 32 114 57 41 63 50 60 141.7 24-SWT-S38

Example for comp. :
EVT06LOMD
145
3
Adjustable L couplings
Plug-in version

l2
lg2
SW2
SW3
d
y
d
1
l
5
l
g
Series
Tube OD
d1
Pressure dy lg lg2 l2 l5 SW2 SW3 kg/100
ca.
Order designation
L 6 PN 315 4 45 19 12 26 12 14 3.4 24-SWL-L6
L 8 PN 315 6 48.5 21 14 27.5 12 17 4.7 24-SWL-L8
L 10 PN 315 8 51 22 15 29 14 19 6.0 24-SWL-L10
L 12 PN 315 10 53.5 24 17 29.5 17 22 7.9 24-SWL-L12
L 15 PN 315 12 60.5 28 21 32.5 19 27 13.7 24-SWL-L15
L 18 PN 315 15 66.5 31 23.5 35.5 24 32 20.8 24-SWL-L18
L 22 PN 160 19 73.5 35 27.5 38.5 27 36 27.2 24-SWL-L22
L 28 PN 160 24 79.5 38 30.5 41.5 36 41 39.1 24-SWL-L28
L 35 PN 160 30 96 45 34.5 51 41 50 66.1 24-SWL-L35
L 42 PN 160 36 107 51 40 56 50 60 100.6 24-SWL-L42

S 6 PN 630 4 50 23 16 27 12 17 5.6 24-SWL-S6
S 8 PN 630 5 51.5 24 17 27.5 14 19 7.8 24-SWL-S8
S 10 PN 630 7 55 25 17.5 30 17 22 10.3 24-SWL-S10
S 12 PN 630 8 60 29 21.5 31 17 24 13.4 24-SWL-S12
S 14 PN 630 10 65 30 22 35 19 27 17.7 24-SWL-S14
S 16 PN 400 12 69.5 33 24.5 36.5 24 30 22.5 24-SWL-S16
S 20 PN 400 16 81.5 37 26.5 44.5 27 36 34.8 24-SWL-S20
S 25 PN 400 20 92 42 30 50 36 46 63.5 24-SWL-S25
S 30 PN 400 25 104 49 35.5 55 41 50 91.4 24-SWL-S30
S 38 PN 315 32 120 57 41 63 50 60 141.7 24-SWL-S38

Example for comp. :
EVL06LOMD
146
Straight stud standpipe adapters

l
5
l
g
i
SW1
SW3
dx
d2
d6
Series
Tube OD
d2 Pressure d6 dx lg l5 SW1 SW3 i Nm
-10 %
kg/100
ca.
Order designation
L 6 M 10 x 1 PN 315 14 3.5 32.5 24.5 14 14 8 20 2.4 24-SWSDS-L6-M10B
L 8 M 12 x 1.5 PN 315 17 5 38.5 26.5 17 17 12 30 4.0 24-SWSDS-L8-M12B
L 10 M 14 x 1.5 PN 315 19 7 39.5 27.5 19 19 12 50 4.9 24-SWSDS-L10-M14B
L 12 M 16 x 1.5 PN 315 21 9 42.5 30.5 22 22 12 70 6.8 24-SWSDS-L12-M16B
L 12 M 18 x 1.5 PN 315 23 8.8 42.5 30.5 24 22 12 90 7.8 24-SWSDS-L12-M18B
L 12 M 22 x 1.5 PN 315 27 9 46 32 27 22 14 140 10.8 24-SWSDS-L12-M22B
L 15 M 18 x 1.5 PN 315 23 11 43.5 31.5 24 27 12 90 9.8 24-SWSDS-L15-M18B
L 18 M 22 x 1.5 PN 315 27 14 45.5 31.5 27 32 14 140 14.0 24-SWSDS-L18-M22B
L 22 M 26 x 1.5 PN 160 31 17 48.5 32.5 32 36 16 190 19.6 24-SWSDS-L22-M26B
L 28 M 33 x 2 PN 160 39 22.5 53 35 41 41 18 300 26.9 24-SWSDS-L28-M33B
L 35 M 42 x 2 PN 160 49 28.5 62.5 42.5 50 50 20 500 45.7 24-SWSDS-L35-M42B
L 42 M 48 x 2 PN 160 55 35 68.5 46.5 55 60 22 600 60.7 24-SWSDS-L42-M48B

S 6 M 12 x 1.5 PB 630 17 3.5 39 27 17 17 12 45 4.4 24-SWSDS-S6-M12B
S 8 M 14 x 1.5 PB 630 19 4.5 41.5 29.5 19 19 12 60 6.0 24-SWSDS-S8-M14B
S 10 M 16 x 1.5 PB 630 21 6 44 32 22 22 12 80 8.3 24-SWSDS-S10-M16B
S 12 M 18 x 1.5 PB 630 23 7 46 34 24 24 12 120 11.0 24-SWSDS-S12-M18B
S 14 M 20 x 1.5 PB 630 25 9 50.5 36.5 27 27 14 160 14.7 24-SWSDS-S14-M20B
S 16 M 22 x 1.5 PB 400 27 11 51 37 27 30 14 170 17.0 24-SWSDS-S16-M22B
S 20 M 27 x 2 PB 400 32 15 59 43 32 36 16 280 25.3 24-SWSDS-S20-M27B
S 25 M 33 x 2 PB 400 39 18 66 48 41 46 18 450 48.8 24-SWSDS-S25-M33B
S 30 M 42 x 2 PB 250 49 23 71 51 50 50 20 540 65.9 24-SWSDS-S30-M42B
S 38 M 48 x 2 PB 250 55 29 82 60 55 60 22 700 95.2 24-SWSDS-S38-M48B

Standard size At PB 630, the safety
is 2.
Example for comp. :
EVGE06LM
147
3

l
5
l
g
i
SW1
SW3
dx
d2
d6
Series
Tube OD
-10 %
kg/100
ca.
Order designation
L 6 G 1/8 A PN 315 14 3.5 32.5 24.5 14 14 8 20 2.4 24-SWSDS-L6-G1/8B
L 8 G 1/4 A PN 315 18 4.5 41.5 29.5 19 17 12 50 4.6 24-SWSDS-L8-G1/4B
L 10 G 1/4 A PN 315 18 6 39.5 27.5 19 19 12 50 5.1 24-SWSDS-L10-G1/4B
L 12 G 1/4 A PN 315 18 6 45.5 33.5 19 22 12 50 7.0 24-SWSDS-L12-G1/4B
L 12 G 3/8 A PN 315 22 7 46 34 22 22 12 80 8.2 24-SWSDS-L12-G3/8B
L 12 G 1/2 A PN 315 26 7 48.5 34.5 27 22 14 140 9.8 24-SWSDS-L12-G1/2B
L 15 G 3/8 A PN 315 22 9 43.5 31.5 22 27 12 80 9.6 24-SWSDS-L15-G3/8B
L 15 G 1/2 A PN 315 26 11 46 32 27 27 14 140 11.9 24-SWSDS-L15-G1/2B
L 18 G 1/2 A PN 315 26 14 45.5 31.5 27 32 14 140 13.6 24-SWSDS-L18-G1/2B
L 22 G 3/4 A PN 160 32 18 48.5 32.5 32 36 16 190 18.7 24-SWSDS-L22-G3/4B
L 28 G 1 A PN 160 39 22.5 53 35 41 41 18 330 27.1 24-SWSDS-L28-G1B
L 35 G 1 1/4 A PN 160 49 29 62.5 42.5 50 50 20 540 44.8 24-SWSDS-L35-G11/4B
L 42 G 1 1/2 A PN 160 55 35 68.5 46.5 55 60 22 630 60.7 24-SWSDS-L42-G11/2B

S 6 G 1/4 A PB 630 18 3.5 39 27 19 17 12 60 4.9 24-SWSDS-S6-G1/4B
S 8 G 1/4 A PB 630 18 4.5 41.5 29.5 19 19 12 60 5.8 24-SWSDS-S8-G1/4B
S 10 G 3/8 A PB 630 22 6 44 32 22 22 12 100 8.7 24-SWSDS-S10-G3/8B
S 12 G 1/4 A PB 630 18 5 45.5 33.5 19 24 12 60 8.4 24-SWSDS-S12-G1/4B
S 12 G 3/8 A PB 630 22 7 46 34 22 24 12 100 10.0 24-SWSDS-S12-G3/8B
S 12 G 1/2 A PB 400 26 7 48.5 34.5 27 24 14 160 14.9 24-SWSDS-S12-G1/2B
S 14 G 1/2 A PB 630 26 9 50.5 36.5 27 27 14 160 15.4 24-SWSDS-S14-G1/2B
S 16 G 1/2 A PB 400 26 11 51 37 27 30 14 160 16.3 24-SWSDS-S16-G1/2B
S 20 G 3/4 A PB 400 32 15 59 43 32 36 16 280 26.0 24-SWSDS-S20-G3/4B
S 25 G 1 A PB 400 39 18 66 48 41 46 18 440 48.5 24-SWSDS-S25-G1B
S 30 G 1 1/4 A PB 250 49 22.5 71 51 50 50 20 580 67.2 24-SWSDS-S30-G11/4B
S 38 G 1 1/2 A PB 250 55 28.5 82 60 55 60 22 700 96.9 24-SWSDS-S38-G11/2B

EVGE06LR
148

l
g
l
5
dx
d2
d7
i
SW1
SW3
Series
Tube OD
-10 %
kg/100
ca.
Order designation
L 6 M 10 x 1 PN 315 13.9 3.5 32.5 24.5 14 14 8 15 2.3 24-SWSDS-L6-M10E
L 8 M 12 x 1.5 PN 315 16.9 5 38.5 26.5 17 17 12 25 3.9 24-SWSDS-L8-M12E
L 10 M 14 x 1.5 PN 315 18.9 7 39.5 27.5 19 19 12 50 4.9 24-SWSDS-L10-M14E
L 12 M 16 x 1.5 PN 315 21.9 9 42.5 30.5 22 22 12 70 6.8 24-SWSDS-L12-M16E
L 15 M 18 x 1.5 PN 315 23.9 11 43.5 31.5 24 27 12 90 9.8 24-SWSDS-L15-M18E
L 18 M 22 x 1.5 PN 315 26.9 14 45.5 31.5 27 32 14 130 14.0 24-SWSDS-L18-M22E
L 22 M 22 x 1.5 PN 315 26.9 14 46.5 32.5 27 36 14 130 14.0 24-SWSDS-L22-M22E
L 22 M 26 x 1.5 PN 160 31.9 17 48.5 32.5 32 36 16 180 19.4 24-SWSDS-L22-M26E
L 28 M 33 x 2 PN 160 39.9 22.5 53 35 41 41 18 230 27.0 24-SWSDS-L28-M33E
L 35 M 42 x 2 PN 160 49.9 28.5 62.5 42.5 50 50 20 330 45.3 24-SWSDS-L35-M42E
L 42 M 48 x 2 PN 160 54.9 35 68.5 46.5 55 60 22 500 62.7 24-SWSDS-L42-M48E

S 6 M 12 x 1.5 PN 630 16.9 3.5 39 27 17 17 12 50 4.3 24-SWSDS-S6-M12E
S 8 M 14 x 1.5 PN 630 18.9 4.5 41.5 29.5 19 19 12 60 6.0 24-SWSDS-S8-M14E
S 10 M 16 x 1.5 PN 630 21.9 6 44 32 22 22 12 80 8.6 24-SWSDS-S10-M16E
S 12 M 18 x 1.5 PN 630 23.9 7 46 34 24 24 12 90 10.9 24-SWSDS-S12-M18E
S 14 M 20 x 1.5 PN 630 25.9 9 50.5 36.5 27 27 14 130 14.6 24-SWSDS-S14-M20E
S 16 M 22 x 1.5 PN 400 26.9 11 51 37 27 30 14 130 16.7 24-SWSDS-S16-M22E
S 20 M 27 x 2 PN 400 31.9 15 59 43 32 36 16 200 25.4 24-SWSDS-S20-M27E
S 25 M 33 x 2 PN 400 39.9 18 66 48 41 46 18 250 48.6 24-SWSDS-S25-M33E
S 30 M 42 x 2 PN 400 49.9 23 71 51 50 50 20 500 66.2 24-SWSDS-S30-M42E
S 38 M 48 x 2 PN 315 54.9 29 82 60 55 60 22 600 93.3 24-SWSDS-S38-M48E

EVGE06LMED
149
3

l
g
l
5
dx
d2
d7
i
SW1
SW3
Series
Tube OD
-10 %
kg/100
ca.
Order designation
L 6 G 1/8 A PN 315 13.9 3.5 32.5 24.5 14 14 8 20 2.3 24-SWSDS-L6-G1/8E
L 6 G 1/4 A PN 315 18.9 3.5 38 26 19 14 12 50 3.9 24-SWSDS-L6-G1/4E
L 8 G 1/4 A PN 315 18.9 4.5 41.5 29.5 19 17 12 50 4.6 24-SWSDS-L8-G1/4E
L 8 G 3/8 A PN 315 21.9 4.5 43 31 22 17 14 80 6.0 24-SWSDS-L8-G3/8E
L 10 G 1/4 A PN 315 18.9 6 39.5 27.5 19 19 12 50 5.0 24-SWSDS-L10-G1/4E
L 10 G 3/8 A PN 315 21.9 7 41 29 22 19 12 80 6.4 24-SWSDS-L10-G3/8E
L 12 G 1/4 A PN 315 18.9 6 45.5 33.5 19 22 12 50 7.0 24-SWSDS-L12-G1/4E
L 12 G 3/8 A PN 315 21.9 7 46 34 22 22 12 80 8.0 24-SWSDS-L12-G3/8E
L 12 G 1/2 A PN 315 26.9 7 48.5 34.5 27 22 14 100 10.1 24-SWSDS-L12-G1/2E
L 15 G 3/8 A PN 315 21.9 9 43.5 31.5 22 27 12 80 9.4 24-SWSDS-L15-G3/8E
L 15 G 1/2 A PN 315 26.9 11 46 32 27 27 14 100 11.7 24-SWSDS-L15-G1/2E
L 18 G 1/2 A PN 315 26.9 14 45.5 31.5 27 32 14 100 13.4 24-SWSDS-L18-G1/2E
L 22 G 1/2 A PN 160 26.9 14 46.5 32.5 27 36 14 100 15.4 24-SWSDS-L22-G1/2E
L 22 G 3/4 A PN 160 31.9 18 48.5 32.5 32 36 16 180 18.4 24-SWSDS-L22-G3/4E
L 28 G 1 A PN 160 39.9 22.5 53 35 41 41 18 230 26.8 24-SWSDS-L28-G1E
L 35 G 1 1/4 A PN 160 49.9 29 62.5 42.5 50 50 20 330 43.9 24-SWSDS-L35-G11/4E
L 42 G 1 1/2 A PN 160 54.9 35 68.5 46.5 55 60 22 500 62.3 24-SWSDS-L42-G11/2E

S 6 G 1/4 A PN 630 18.9 3.5 39 27 19 17 12 60 4.9 24-SWSDS-S6-G1/4E
S 8 G 1/4 A PN 630 18.9 4.5 41.5 29.5 19 19 12 60 5.8 24-SWSDS-S8-G1/4E
S 10 G 1/4 A PN 630 18.9 5 43.5 31.5 19 22 12 60 7.2 24-SWSDS-S10-G1/4E
S 10 G 3/8 A PN 630 21.9 6 44 32 22 22 12 90 8.7 24-SWSDS-S10-G3/8E
S 12 G 3/8 A PN 630 21.9 7 46 34 22 24 12 90 9.9 24-SWSDS-S12-G3/8E
S 12 G 1/2 A PN 630 26.9 7 48.5 34.5 27 24 14 150 12.8 24-SWSDS-S12-G1/2E
S 14 G 1/2 A PN 630 26.9 9 50.5 36.5 27 27 14 150 15.4 24-SWSDS-S14-G1/2E
S 16 G 1/2 A PN 400 26.9 11 51 37 27 30 14 150 16.2 24-SWSDS-S16-G1/2E
S 16 G 3/4 A PN 400 31.9 11 55 39 32 30 16 200 22.7 24-SWSDS-S16-G3/4E
S 20 G 3/4 A PN 400 31.9 15 59 43 32 36 16 200 25.5 24-SWSDS-S20-G3/4E
S 25 G 1 A PN 400 39.9 18 66 48 41 46 18 250 48.8 24-SWSDS-S25-G1E
S 30 G 1 1/4 A PN 400 49.9 22.5 71 51 50 50 20 500 66.7 24-SWSDS-S30-G11/4E
S 38 G 1 1/2 A PN 315 54.9 28.5 82 60 55 60 22 600 95.3 24-SWSDS-S38-G11/2E

EVGE06LRED
150

l
g
dx
d2
i
SW1
SW3
Series
Tube OD
d2 Pressure dx lg SW1 SW3 i Nm
-10 %
kg/100
ca.
Order designation
L 6 1/8 NPT PN 315 3.5 33 11 14 9.9 15 2.2 24-SWSDS-L6-N1/8T
L 8 1/4 NPT PN 315 5 39.6 14 17 15.1 35 3.5 24-SWSDS-L8-N1/4T
L 10 1/4 NPT PN 315 7 40.6 14 19 15.1 35 4.2 24-SWSDS-L10-N1/4T
L 12 3/8 NPT PN 315 7 43 19 22 15.2 55 7.2 24-SWSDS-L12-N3/8T
L 15 1/2 NPT PN 315 11 48.5 22 27 19.8 110 11.0 24-SWSDS-L15-N1/2T
L 18 1/2 NPT PN 315 13 48 22 32 19.8 110 13.0 24-SWSDS-L18-N1/2T
L 22 3/4 NPT PN 160 17 50 27 36 20.1 175 18.2 24-SWSDS-L22-N3/4T
L 28 1 NPT PN 160 22.5 57 36 41 25 265 25.9 24-SWSDS-L28-N1T
L 35 1 1/4 NPT PN 160 29 65 46 50 25.6 315 42.8 24-SWSDS-L35-N11/4T
L 42 1 1/2 NPT PN 160 35 69 50 60 26 385 57.5 24-SWSDS-L42-N11/2T

S 6 1/4 NPT PN 630 3.5 40 14 17 15.1 35 4.3 24-SWSDS-S6-N1/4T
S 8 1/4 NPT PN 630 4.5 42 14 19 15.1 35 4.9 24-SWSDS-S8-N1/4T
S 10 3/8 NPT PN 630 6 44 19 22 15.2 55 8.0 24-SWSDS-S10-N3/8T
S 12 3/8 NPT PN 630 7 46 19 24 15.2 55 8.6 24-SWSDS-S12-N3/8T
S 14 1/2 NPT PN 630 9 53 22 27 19.8 110 13.8 24-SWSDS-S14-N1/2T
S 16 1/2 NPT PN 400 11 52.8 22 30 19.8 110 14.7 24-SWSDS-S16-N1/2T
S 20 3/4 NPT PN 400 15 60 27 36 20.1 175 23.9 24-SWSDS-S20-N3/4T
S 25 1 NPT PN 400 18 69 36 46 25 265 46.0 24-SWSDS-S25-N1T
S 30 1 1/4 NPT PN 400 22.5 72.6 46 50 25.6 315 65.2 24-SWSDS-S30-N11/4T
S 38 1 1/2 NPT PN 315 28.5 83 50 60 26 385 86.3 24-SWSDS-S38-N11/2T

Example for comp. :
EVGE06L1/8NPT
151
3
Reducing inserts
with hexagon for locking

dy
SW1
SW2
d2
l
2
l
g
d1
Tube
socket
d2
Series
Tube OD
d1
Pressure dy lg l2 SW1 SW2 kg/100
ca.
Order designation
L 6 LL 4 PN 100 3 31 27 11 14 2.1 24-SWS-L6-LL4
L 8 L 6 PN 315 4 33 26 12 17 2.9 24-SWS-L8-L6
L 10 L 6 PN 315 4 34 27 12 19 3.4 24-SWS-L10-L6
L 10 L 8 PN 315 6 35 28 14 19 3.8 24-SWS-L10-L8
L 12 L 6 PN 315 4 37 30 14 22 4.7 24-SWS-L12-L6
L 12 L 8 PN 315 6 37 30 14 22 4.8 24-SWS-L12-L8
L 12 L 10 PN 315 8 38 31 17 22 5.2 24-SWS-L12-L10
L 12 S 8 PN 315 5 39 32 17 22 5.7 24-SWS-L12-S8
L 15 L 6 PN 315 4 38 31 17 27 7.4 24-SWS-L15-L6
L 15 L 8 PN 315 6 38 31 17 27 7.5 24-SWS-L15-L8
L 15 L 10 PN 315 8 39 32 17 27 7.7 24-SWS-L15-L10
L 15 L 12 PN 315 10 40 33 19 27 8.2 24-SWS-L15-L12
L 18 L 6 PN 315 4 37.5 30.5 19 32 11.0 24-SWS-L18-L6
L 18 L 8 PN 315 6 37.5 30.5 19 32 10.2 24-SWS-L18-L8
L 18 L 10 PN 315 8 38.5 31.5 19 32 10.2 24-SWS-L18-L10
L 18 L 12 PN 315 10 38.5 31.5 19 32 10.3 24-SWS-L18-L12
L 18 L 15 PN 315 12 39.5 32.5 24 32 11.9 24-SWS-L18-L15
L 18 S 16 PN 315 12 50 41.5 30 32 19.2 24-SWS-L18-S16
L 22 L 6 PN 160 4 41 34 24 36 14.8 24-SWS-L22-L6
L 22 L 8 PN 160 6 38.5 31.5 24 36 14.5 24-SWS-L22-L8
L 22 L 10 PN 160 8 39.5 32.5 24 36 14.1 24-SWS-L22-L10
L 22 L 12 PN 160 10 39.5 32.5 24 36 14.1 24-SWS-L22-L12
L 22 L 15 PN 160 12 40.5 33.5 24 36 14.7 24-SWS-L22-L15
L 22 L 18 PN 160 15 41.5 34 27 36 16.2 24-SWS-L22-L18
L 22 S 20 PN 160 16 50.5 40 32 36 21.5 24-SWS-L22-S20
L 28 L 6 PN 160 4 42 35 30 41 19.1 24-SWS-L28-L6
L 28 L 8 PN 160 6 42 35 30 41 17.5 24-SWS-L28-L8
L 28 L 10 PN 160 8 41 34 30 41 17.8 24-SWS-L28-L10
L 28 L 12 PN 160 10 41 34 30 41 18.3 24-SWS-L28-L12
L 28 L 15 PN 160 12 42 35 30 41 18.4 24-SWS-L28-L15
L 28 L 18 PN 160 15 43 35.5 30 41 19.1 24-SWS-L28-L18
Other diameter combinations
available upon request.
Example for comp. :
KOR08/06LOMD
152
Reducing inserts

dy
SW1
SW2
d2
l
2
l
g
d1
Tube
socket
d2
Series
Tube OD
d1
ca.
Order designation
L 28 L 22 PN 160 19 45 37.5 32 41 20.2 24-SWS-L28-L22
L 28 S 25 PN 160 20 58 46 41 41 38.7 24-SWS-L28-S25
L 35 L 8 PN 160 6 48 41 36 50 27.9 24-SWS-L35-L8
L 35 L 10 PN 160 8 49 42 36 50 28.8 24-SWS-L35-L10
L 35 L 12 PN 160 10 47.5 40.5 36 50 28.6 24-SWS-L35-L12
L 35 L 15 PN 160 12 48.5 41.5 36 50 29.1 24-SWS-L35-L15
L 35 L 18 PN 160 15 49.5 42 36 50 28.7 24-SWS-L35-L18
L 35 L 22 PN 160 19 51.5 44 36 50 28.8 24-SWS-L35-L22
L 35 L 28 PN 160 24 52.5 45 41 50 31.8 24-SWS-L35-L28
L 42 L 10 PN 160 8 51 44 46 60 44.2 24-SWS-L42-L10
L 42 L 12 PN 160 10 51 44 46 60 45.2 24-SWS-L42-L12
L 42 L 15 PN 160 12 52 45 46 60 45.0 24-SWS-L42-L15
L 42 L 18 PN 160 15 52 44.5 46 60 46.2 24-SWS-L42-L18
L 42 L 22 PN 160 19 54 46.5 46 60 44.9 24-SWS-L42-L22
L 42 L 28 PN 160 24 55 47.5 46 60 45.1 24-SWS-L42-L28
L 42 L 35 PN 160 30 58 47.5 46 60 47.8 24-SWS-L42-L35

153
3
Reducing inserts

dy
SW1
SW2
d2
l
2
l
g
d1
Tube
socket
d2
Series
Tube OD
d1
ca.
Order designation
S 8 S 6 PN 630 4 37 30 14 19 4.4 24-SWS-S8-S6
S 10 S 6 PN 630 4 39 32 14 22 5.9 24-SWS-S10-S6
S 10 S 8 PN 630 5 41 34 17 22 6.7 24-SWS-S10-S8
S 12 L 12 PN 315 7 38 31 19 24 6.9 24-SWS-S12-L12
S 12 S 6 PN 630 4 39 32 14 24 6.6 24-SWS-S12-S6
S 12 S 8 PN 630 5 41 34 17 24 7.4 24-SWS-S12-S8
S 12 S 10 PN 630 7 41 33.5 19 24 7.8 24-SWS-S12-S10
S 14 S 6 PN 630 4 42 35 17 27 9.6 24-SWS-S14-S6
S 14 S 8 PN 630 5 44 37 17 27 10.0 24-SWS-S14-S8
S 14 S 10 PN 630 7 44 36.5 19 27 10.6 24-SWS-S14-S10
S 14 S 12 PN 630 8 46 38.5 22 27 12.0 24-SWS-S14-S12
S 16 L 12 PN 315 10 43 36 19 30 11.6 24-SWS-S16-L12
S 16 L 15 PN 315 12 46 39 24 30 13.4 24-SWS-S16-L15
S 16 S 6 PN 400 4 42 35 17 30 11.1 24-SWS-S16-S6
S 16 S 8 PN 400 5 44 37 17 30 11.6 24-SWS-S16-S8
S 16 S 10 PN 400 7 44 36.5 19 30 11.9 24-SWS-S16-S10
S 16 S 12 PN 400 8 46 38.5 22 30 13.3 24-SWS-S16-S12
S 16 S 14 PN 400 10 48 40 24 30 14.7 24-SWS-S16-S14
S 20 L 15 PN 315 12 51 44 24 36 18.6 24-SWS-S20-L15
S 20 L 18 PN 315 14 51 43.5 27 36 20.6 24-SWS-S20-L18
S 20 S 6 PN 400 4 47 40 22 36 7.4 24-SWS-S20-S6
S 20 S 8 PN 400 5 48 41 22 36 17.2 24-SWS-S20-S8
S 20 S 10 PN 400 7 48 40.5 22 36 16.8 24-SWS-S20-S10
S 20 S 12 PN 400 8 50 42.5 22 36 17.9 24-SWS-S20-S12
S 20 S 14 PN 400 10 52 44 24 36 19.1 24-SWS-S20-S14
S 20 S 16 PN 400 12 52 43.5 27 36 20.3 24-SWS-S20-S16
S 25 L 22 PN 160 18 55 47.5 32 46 36.0 24-SWS-S25-L22
S 25 L 18 PN 315 15 51 43.5 27 46 31.7 24-SWS-S25-L18
S 25 S 6 PN 400 4 51 44 27 46 31.2 24-SWS-S25-S6
S 25 S 8 PN 400 5 51 44 27 46 31.5 24-SWS-S25-S8
S 25 S 10 PN 400 7 51 43.5 27 46 31.9 24-SWS-S25-S10
154
Reducing inserts

dy
SW1
SW2
d2
l
2
l
g
d1
Tube
socket
d2
Series
Tube OD
d1
ca.
Order designation
S 25 S 12 PN 400 8 53 45.5 27 46 32.6 24-SWS-S25-S12
S 25 S 14 PN 400 10 55 47 27 46 33.1 24-SWS-S25-S14
S 25 S 16 PN 400 12 55 46.5 27 46 33.2 24-SWS-S25-S16
S 25 S 20 PN 400 16 59 48.5 32 46 37.0 24-SWS-S25-S20
S 30 S 8 PN 400 5 59 52 32 50 40.9 24-SWS-S30-S8
S 30 S 12 PN 400 8 56 48.5 32 50 37.5 24-SWS-S30-S12
S 30 S 14 PN 400 10 58 50 32 50 18.1 24-SWS-S30-S14
S 30 S 16 PN 400 12 58 49.5 32 50 37.9 24-SWS-S30-S16
S 30 S 20 PN 400 16 62 51.5 32 50 39.9 24-SWS-S30-S20
S 30 S 25 PN 400 20 66 54 41 50 49.4 24-SWS-S30-S25
S 38 S 10 PN 315 7 62 54.5 41 60 28.2 24-SWS-S38-S10
S 38 S 12 PN 315 8 62 54.5 41 60 60.9 24-SWS-S38-S12
S 38 S 16 PN 315 12 64 55.5 41 60 58.9 24-SWS-S38-S16
S 38 S 20 PN 315 16 68 57.5 41 60 60.5 24-SWS-S38-S20
S 38 S 25 PN 315 20 72 60 41 60 64.5 24-SWS-S38-S25
S 38 S 30 PN 315 25 74 60.5 46 60 71.4 24-SWS-S38-S30

155
3
24 taper couplings

157
3
Straight couplings
With taper and O-ring
fit in bore type
W DIN 3861 / ISO 8434-1

d1
dy
SW3
l
1
Series
Tube OD
d1
Pressure dy l1 SW3 kg/100
ca.
Order designation
L 6 PN 500 2.5 33.5 14 2.9 24-SW2OS-L6-CP1
L 6 PN 500 2.5 36 14 3.0 24-SW2OS-L6-CP2
L 6 PN 500 2.5 39 14 3.1 24-SW2OS-L6
L 8 PN 500 4.5 33.5 17 4.4 24-SW2OS-L8-CP1
L 8 PN 500 4.5 36 17 4.6 24-SW2OS-L8-CP2
L 8 PN 500 4.5 39.5 17 4.6 24-SW2OS-L8
L 10 PN 500 6 34 19 5.5 24-SW2OS-L10-CP1
L 10 PN 500 6 37 19 5.9 24-SW2OS-L10-CP2
L 10 PN 500 6 39.5 19 6.0 24-SW2OS-L10
L 12 PN 400 8 34 22 7.4 24-SW2OS-L12-CP1
L 12 PN 400 8 37 22 7.7 24-SW2OS-L12-CP2
L 12 PN 400 8 39.5 22 7.9 24-SW2OS-L12
L 15 PN 400 10 40 27 14.3 24-SW2OS-L15-CP12
L 15 PN 400 10 42.5 27 14.8 24-SW2OS-L15
L 18 PN 400 13 39 32 17.6 24-SW2OS-L18-CP1
L 18 PN 400 13 42.5 32 18.3 24-SW2OS-L18-CP2
L 18 PN 400 13 45 32 18.8 24-SW2OS-L18
L 22 PN 250 17 44 36 24.4 24-SW2OS-L22-CP1
L 22 PN 250 17 46.5 36 25.1 24-SW2OS-L22-CP2
L 22 PN 250 17 49.5 36 25.6 24-SW2OS-L22
L 28 PN 250 22 48 41 31.2 24-SW2OS-L28-CP12
L 28 PN 250 22 51.5 41 31.7 24-SW2OS-L28
L 35 PN 250 28 52 50 45.1 24-SW2OS-L35-CP1
L 35 PN 250 28 57.5 50 48.3 24-SW2OS-L35-CP2
L 35 PN 250 28 61 50 49.8 24-SW2OS-L35
L 42 PN 250 34 57.5 60 74.6 24-SW2OS-L42-CP12
L 42 PN 250 34 62.5 60 78.1 24-SW2OS-L42

GZ06LVIT
158
Straight couplings
fit in bore type
W DIN 3861 / ISO 8434-1

d1
dy
SW3
l
1
Series
Tube OD
d1
Pressure dy l1 SW3 kg/100
ca.
Order designation
S 6 PN 800 2.5 33 17 4.2 24-SW2OS-S6-CP1
S 6 PN 800 2.5 39 17 4.6 24-SW2OS-S6-CP2
S 6 PN 800 2.5 40.5 17 4.7 24-SW2OS-S6
S 8 PN 800 4 34 19 5.6 24-SW2OS-S8-CP1
S 8 PN 800 4 39 19 6.0 24-SW2OS-S8-CP2
S 8 PN 800 4 40.5 19 6.1 24-SW2OS-S8
S 10 PN 800 6 35 22 7.7 24-SW2OS-S10-CP1
S 10 PN 800 6 43.5 22 8.5 24-SW2OS-S10-CP2
S 12 PN 630 8 38 24 9.7 24-SW2OS-S12-CP1
S 12 PN 630 8 44 24 10.4 24-SW2OS-S12-CP2
S 14 PN 630 9 41 27 14.4 24-SW2OS-S14-CP1
S 14 PN 630 9 48.5 27 15.6 24-SW2OS-S14-CP2
S 16 PN 630 11 42 30 17.5 24-SW2OS-S16-CP1
S 16 PN 630 11 49 30 18.6 24-SW2OS-S16-CP2
S 20 PN 420 14 48 36 26.1 24-SW2OS-S20-CP1
S 20 PN 420 14 60.5 36 29.6 24-SW2OS-S20-CP2
S 25 PN 420 16 73 46 63.1 24-SW2OS-S25-LG73
S 25 PN 420 16 107 46 80.4 24-SW2OS-S25-LG107
S 25 PN 420 18 54.5 46 51.7 24-SW2OS-S25-CP1
S 25 PN 420 18 65.5 46 56.4 24-SW2OS-S25-CP2
S 25 PN 420 18 67.5 46 56.9 24-SW2OS-S25
S 30 PN 420 23 62 50 63.1 24-SW2OS-S30-CP1
S 30 PN 420 23 72.5 50 68.6 24-SW2OS-S30-CP2
S 38 PN 420 30 67 60 86.7 24-SW2OS-S38-CP1
S 38 PN 420 30 83 60 99.6 24-SW2OS-S38-CP2

Standard size
159
3
fit in bore type
W DIN 3861 / ISO 8434-1

d1
SW3
SW2
d2
dy
l
1
Series
Tube OD
d1
Series
Tube OD
d2
Pressure dy l1 SW2 SW3 kg/100
ca.
Order designation
L 6 S 6 PN 500 2.5 34 17 14 3.7 24-SW2OS-L6-S6-CP1
L 6 S 6 PN 500 2.5 37.5 17 14 3.9 24-SW2OS-L6-S6-CP2
L 8 L 6 PN 500 2.5 34 14 17 3.8 24-SW2OS-L8-L6-CP1
L 8 S 8 PN 500 4 34.5 19 17 5.3 24-SW2OS-L8-S8-CP1
L 10 L 6 PN 500 2.5 34.5 14 19 4.4 24-SW2OS-L10-L6-CP1
L 10 L 8 PN 500 4.5 34.5 17 19 5.2 24-SW2OS-L10-L8-CP1
L 10 S 10 PN 500 6 35 22 19 6.8 24-SW2OS-L10-S10-CP1
L 10 S 10 PN 500 6 40 22 19 7.2 24-SW2OS-L10-S10-CP2
L 12 L 6 PN 400 2.5 34.5 14 22 5.4 24-SW2OS-L12-L6-CP1
L 12 L 8 PN 400 4.5 34.5 17 22 6.2 24-SW2OS-L12-L8-CP1
L 12 L 10 PN 400 6 34.5 19 22 6.8 24-SW2OS-L12-L10-CP1
L 12 L 10 PN 400 6 37.5 19 22 7.1 24-SW2OS-L12-L10-CP2
L 12 S 12 PN 400 8 37.5 24 22 8.9 24-SW2OS-L12-S12-CP1
L 12 S 12 PN 400 8 40.5 24 22 9.3 24-SW2OS-L12-S12-CP2
L 15 L 8 PN 400 4.5 38 17 27 9.6 24-SW2OS-L15-L8-CP12
L 15 L 10 PN 400 6 38 19 27 10.5 24-SW2OS-L15-L10-CP12
L 15 L 12 PN 400 8 39 22 27 11.4 24-SW2OS-L15-L12-CP1
L 18 L 10 PN 400 8 37.5 19 32 12.2 24-SW2OS-L18-L10-CP1
L 18 L 12 PN 400 8 37.5 22 32 13.1 24-SW2OS-L18-L12-CP1
L 18 L 15 PN 400 10 40.5 27 32 16.5 24-SW2OS-L18-L15-CP1
L 18 L 15 PN 400 10 45 27 32 17.3 24-SW2OS-L18-L15
L 18 S 16 PN 400 11 41.5 30 32 18.2 24-SW2OS-L18-S16-CP1
L 22 L 12 PN 250 8 43.5 22 36 18.1 24-SW2OS-L22-L12-CP1
L 22 L 15 PN 250 10 43.5 27 36 20.2 24-SW2OS-L22-L15-CP12
L 22 L 18 PN 250 13 44 32 36 22.1 24-SW2OS-L22-L18-CP1
L 22 S 20 PN 250 14 47 36 36 25.9 24-SW2OS-L22-S20-CP1
L 22 S 20 PN 250 14 53.5 36 36 27.5 24-SW2OS-L22-S20-CP2
L 28 L 15 PN 250 10 46 27 41 24.8 24-SW2OS-L28-L15
L 28 L 18 PN 250 13 46 32 41 26.0 24-SW2OS-L28-L18-CP2
L 28 L 22 PN 250 17 46 36 41 28.2 24-SW2OS-L28-L22-CP1
L 28 S 25 PN 250 18 50.5 46 41 40.8 24-SW2OS-L28-S25-CP1
Example for comp. :
GZR08/06LVIT
160
fit in bore type
W DIN 3861 / ISO 8434-1

d1
SW3
SW2
d2
dy
l
1
Series
Tube OD
d1
Series
Tube OD
d2
ca.
Order designation
L 35 L 18 PN 250 13 51 32 50 37.5 24-SW2OS-L35-L18-CP12
L 35 L 22 PN 250 17 51 36 50 38.4 24-SW2OS-L35-L22-CP1
L 35 L 28 PN 250 18 51 41 50 40.3 24-SW2OS-L35-L28-CP1
L 35 L 28 PN 250 18 52.5 41 50 41.0 24-SW2OS-L35-L28-CP2
L 35 S 30 PN 250 23 59 50 50 55.8 24-SW2OS-L35-S30-CP1
L 42 L 22 PN 250 17 54 36 60 55.7 24-SW2OS-L42-L22
L 42 L 28 PN 250 18 54 41 60 57.5 24-SW2OS-L42-L28-CP2
L 42 L 35 PN 250 28 56.5 50 60 62.5 24-SW2OS-L42-L35-CP1
L 42 S 38 PN 250 30 62 60 60 78.3 24-SW2OS-L42-S38-CP1
L 42 S 38 PN 250 30 66 60 60 84.1 24-SW2OS-L42-S38-CP2

S 8 S 6 PN 800 2.5 34 17 19 5.2 24-SW2OS-S8-S6-CP1
S 10 S 6 PN 800 2.5 34.5 17 22 6.2 24-SW2OS-S10-S6-CP1
S 10 S 8 PN 800 4 34.5 19 22 6.8 24-SW2OS-S10-S8-CP1
S 10 S 8 PN 800 4 41 19 22 7.7 24-SW2OS-S10-S8-CP2
S 12 S 6 PN 630 2.5 37.5 17 24 7.6 24-SW2OS-S12-S6-CP1
S 12 S 8 PN 630 4 37.5 19 24 8.0 24-SW2OS-S12-S8-CP1
S 12 S 10 PN 630 6 38 22 24 9.0 24-SW2OS-S12-S10-CP1
S 16 L 15 PN 400 10 41 27 30 16.1 24-SW2OS-S16-L15-CP1
S 16 L 15 PN 400 10 45 27 30 16.8 24-SW2OS-S16-L15-CP2
S 16 S 10 PN 630 6 41.5 22 30 13.5 24-SW2OS-S16-S10-CP1
S 16 S 12 PN 630 8 41.5 24 30 14.1 24-SW2OS-S16-S12-CP1
S 20 L 18 PN 400 13 47 32 36 23.9 24-SW2OS-S20-L18-CP1
S 20 S 12 PN 420 8 47 24 36 19.8 24-SW2OS-S20-S12-CP1
S 20 S 12 PN 420 8 52 24 36 21.4 24-SW2OS-S20-S12-CP2
S 20 S 16 PN 420 11 47.5 30 36 23.0 24-SW2OS-S20-S16-CP1
S 25 L 22 PN 250 17 50.5 36 46 38.9 24-SW2OS-S25-L22-CP1
S 25 L 18 PN 400 13 47.5 32 46 35.4 24-SW2OS-S25-L18-CP1
S 25 S 16 PN 420 11 51 30 46 36.2 24-SW2OS-S25-S16-CP1
S 25 S 20 PN 420 14 53 36 46 40.2 24-SW2OS-S25-S20
161
3
fit in bore type
W DIN 3861 / ISO 8434-1

d1
SW3
SW2
d2
dy
l
1
Series
Tube OD
d1
Series
Tube OD
d2
ca.
Order designation
S 30 L 28 PN 250 22 58 41 50 51.9 24-SW2OS-S30-L28-CP1
S 30 S 16 PN 420 11 58.5 30 50 44.9 24-SW2OS-S30-S16-CP1
S 30 S 20 PN 420 14 59 36 50 47.9 24-SW2OS-S30-S20-CP1
S 30 S 25 PN 420 18 60.5 46 50 58.9 24-SW2OS-S30-S25-CP1
S 30 S 25 PN 420 18 69.5 46 50 65.2 24-SW2OS-S30-S25
S 38 L 35 PN 250 28 61.5 50 60 70.3 24-SW2OS-S38-L35-CP1
S 38 S 20 PN 420 14 61.5 36 60 62.5 24-SW2OS-S38-S20-CP1
S 38 S 25 PN 420 18 63 46 60 72.7 24-SW2OS-S38-S25-CP1
S 38 S 30 PN 420 23 66.5 50 60 77.2 24-SW2OS-S38-S30
S 38 S 30 PN 420 23 78 50 60 89.1 24-SW2OS-S38-S30-CP2

162
Cross couplings

l2
lg
SW2
dx
SW4
d
y
d
1
l
3
Series
Tube OD
d1
Pressure dx dy lg l2 l3 SW2 SW4 Order designation
L 8 PN 315 4 8 56 21 27.5 17 17 24-SWOK-L8
L 10 PN 315 6 8 58 22 29 19 19 24-SWOK-L10
L 12 PN 315 8 10 62 24 29.5 22 22 24-SWOK-L12
L 15 PN 315 10 12 70 28 32.5 24 27 24-SWOK-L15
L 18 PN 315 13 15 68 26.5 38.5 27 32 24-SWOK-L18
L 42 PN 250 34 36 102 40 56 50 60 24-SWOK-L42

163
3
Adjustable elbow couplings

l2
lg2
SW2
SW3
dy2
l
5
d
y
d
1
Series
Tube OD
d1
Pressure dy dy2 lg2 l2 l5 SW2 SW3 kg/100
ca.
Order designation
L 6 PN 500 4 2.5 19 12 26 12 14 4.1 24-SWOE-L6-P
L 8 PN 500 6 4.5 21 14 27.5 14 17 6.2 24-SWOE-L8-P
L 10 PN 500 8 6 22 15 29 14 19 5.3 24-SWOE-L10
L 12 PN 400 10 8 24 17 29.5 19 22 10.1 24-SWOE-L12
L 15 PN 400 12 10 28 21 32.5 19 27 12.9 24-SWOE-L15
L 18 PN 400 15 13 31 23.5 35.5 24 32 18.6 24-SWOE-L18
L 22 PN 250 19 17 35 27.5 38.5 27 36 25.3 24-SWOE-L22
L 28 PN 250 24 22 38 30.5 41.5 36 41 34.2 24-SWOE-L28
L 35 PN 250 30 28 45 34.5 51 41 50 57.4 24-SWOE-L35
L 42 PN 250 36 34 51 40 56 50 60 103.0 24-SWOE-L42

S 6 PN 800 4 2.5 23 16 27 14 17 6.2 24-SWOE-S6-P
S 8 PN 800 5 4 24 17 27.5 17 19 8.5 24-SWOE-S8-P
S 10 PN 800 7 6 25 17.5 30 19 22 12.2 24-SWOE-S10-P
S 12 PN 630 8 8 29 21.5 31 17 24 10.8 24-SWOE-S12
S 14 PN 630 10 9 30 22 35 19 27 14.9 24-SWOE-S14
S 16 PN 630 12 11 33 24.5 36.5 24 30 20.1 24-SWOE-S16
S 20 PN 420 16 14 37 26.5 44.5 27 36 30.5 24-SWOE-S20
S 25 PN 420 20 18 42 30 50 36 46 55.4 24-SWOE-S25
S 30 PN 420 25 23 49 35.5 55 41 50 77.9 24-SWOE-S30
S 38 PN 420 32 30 57 41 63 50 60 118.6 24-SWOE-S38

Example for comp. :
EW06LVITOMD
ISO 8434-1-SWOE-L6-St
164
Adjustable 45
elbow couplings

l
5
l
g
2
l
2
4
5
dy2
SW3
SW2
d
1
d
y
Series
Tube OD
d1
ca.
Order designation
L 6 PN 500 4 2.5 21 14 26 19 14 6.9 24-SWOE45-L6
L 8 PN 500 6 4 22 15 27.5 19 17 7.0 24-SWOE45-L8
L 10 PN 500 8 6 23 16 29 19 19 7.8 24-SWOE45-L10
L 12 PN 400 10 8 24 17 29.5 19 22 8.6 24-SWOE45-L12
L 15 PN 400 12 10 24 17 32.5 19 27 12.6 24-SWOE45-L15
L 18 PN 400 15 13 26.5 19 35.5 24 32 17.8 24-SWOE45-L18
L 22 PN 250 19 17 30 22.5 38.5 27 36 23.6 24-SWOE45-L22
L 28 PN 250 24 22 32 24.5 41.5 36 41 33.6 24-SWOE45-L28
L 35 PN 250 30 28 37.5 27 51 41 50 54.6 24-SWOE45-L35
L 42 PN 250 36 34 37 26 56 50 60 83.6 24-SWOE45-L42

S 6 PN 800 4 2.5 23 16 27 19 17 7.3 24-SWOE45-S6
S 8 PN 800 5 4 23 16 27.5 19 19 8.2 24-SWOE45-S8
S 10 PN 800 7 6 24 16.5 30 19 22 9.5 24-SWOE45-S10
S 12 PN 630 8 8 24.5 17 31 19 24 11.2 24-SWOE45-S12
S 14 PN 630 10 9 25 17 35 19 27 13.6 24-SWOE45-S14
S 16 PN 630 12 11 27.5 19 36.5 24 30 18.8 24-SWOE45-S16
S 20 PN 420 16 14 32 21.5 44.5 27 36 28.6 24-SWOE45-S20
S 25 PN 420 20 18 35 23 50 36 46 52.3 24-SWOE45-S25
S 30 PN 420 25 23 37.5 24 55 41 50 69.7 24-SWOE45-S30
S 38 PN 420 32 30 37 21 63 50 60 106.8 24-SWOE45-S38

Example for comp. :
EV06LVITOMD
ISO 8434-1-SWOE45-L6-St
165
3

l2 SW2
SW3
dy2
l
5
d
y
d
1
lg
Series
Tube OD
d1
Pressure dy dy2 lg l2 l5 SW2 SW3 kg/100
ca.
Order designation
L 6 PN 500 4 2.5 38 12 26 12 14 4.9 24-SWOT-L6-P
L 8 PN 500 6 4.5 42 14 27.5 14 17 6.9 24-SWOT-L8-P
L 10 PN 500 8 6 44 15 29 17 19 9.2 24-SWOT-L10-P
L 12 PN 400 10 8 48 17 29.5 19 22 12.0 24-SWOT-L12-P
L 15 PN 400 12 10 56 21 32.5 19 27 15.4 24-SWOT-L15
L 18 PN 400 15 13 62 23.5 35.5 24 32 21.5 24-SWOT-L18
L 22 PN 250 19 17 70 27.5 38.5 27 36 27.7 24-SWOT-L22
L 28 PN 250 24 22 76 30.5 41.5 36 41 39.7 24-SWOT-L28
L 35 PN 250 30 28 90 34.5 51 41 50 68.0 24-SWOT-L35
L 42 PN 250 36 34 102 40 56 50 60 113.8 24-SWOT-L42

S 6 PN 800 4 2.5 46 16 27 14 17 7.7 24-SWOT-S6-P
S 8 PN 800 5 4 48 17 27.5 17 19 10.5 24-SWOT-S8-P
S 10 PN 800 7 6 50 17.5 30 19 22 14.0 24-SWOT-S10-P
S 12 PN 630 8 8 58 21.5 31 17 24 13.5 24-SWOT-S12
S 14 PN 630 10 9 60 22 35 19 27 18.1 24-SWOT-S14
S 16 PN 630 12 11 66 24.5 36.5 24 30 24.6 24-SWOT-S16
S 20 PN 420 16 14 74 26.5 44.5 27 36 35.6 24-SWOT-S20
S 25 PN 420 20 18 84 30 50 36 46 63.7 24-SWOT-S25
S 30 PN 420 25 23 98 35.5 55 41 50 91.6 24-SWOT-S30
S 38 PN 420 32 30 114 41 63 50 60 147.8 24-SWOT-S38

Example for comp. :
ET06LVITOMD
ISO 8434-1-SWOBT-L6-St
166

l2
lg2
SW2
SW3
dy2
d
y
d
1
l
5
Series
Tube OD
d1
ca.
Order designation
L 6 PN 500 4 2.5 19 12 26 12 14 4.8 24-SWOL-L6-P
L 8 PN 500 6 4.5 21 14 27.5 14 17 7.0 24-SWOL-L8-P
L 10 PN 500 8 6 22 15 29 17 19 9.6 24-SWOL-L10-P
L 12 PN 400 10 8 24 17 29.5 19 22 12.0 24-SWOL-L12-P
L 15 PN 400 12 10 28 21 32.5 19 27 15.4 24-SWOL-L15
L 18 PN 400 15 13 31 23.5 35.5 24 32 21.3 24-SWOL-L18
L 22 PN 250 19 17 35 27.5 38.5 27 36 28.1 24-SWOL-L22
L 28 PN 250 24 22 38 30.5 41.5 36 41 39.2 24-SWOL-L28
L 35 PN 250 30 28 45 34.5 51 41 50 67.7 24-SWOL-L35
L 42 PN 250 36 34 51 40 56 50 60 112.4 24-SWOL-L42

S 6 PN 800 4 2.5 23 16 27 14 17 7.8 24-SWOL-S6-P
S 8 PN 800 5 4 24 17 27.5 17 19 10.2 24-SWOL-S8-P
S 10 PN 800 7 6 25 17.5 30 19 22 14.0 24-SWOL-S10-P
S 12 PN 630 8 8 29 21.5 31 17 24 13.3 24-SWOL-S12
S 14 PN 630 10 9 30 22 35 19 27 18.0 24-SWOL-S14
S 16 PN 630 12 11 33 24.5 36.5 24 30 22.6 24-SWOL-S16
S 20 PN 420 16 14 37 26.5 44.5 27 36 35.3 24-SWOL-S20
S 25 PN 420 20 18 42 30 50 36 46 62.8 24-SWOL-S25
S 30 PN 420 25 23 49 35.5 55 41 50 91.7 24-SWOL-S30
S 38 PN 420 32 30 57 41 63 50 60 149.3 24-SWOL-S38

Example for comp. :
EL06LVITOMD
ISO 8434-1-SWORT-L6-St
167
3
fit in bore type W DIN 3861 / ISO 8434-1

dx
d2
d7
SW1
SW3
i
l
5
Series
Tube OD
d2 Pressure d7 dx l5 SW1 SW3 i Nm
-10 %
kg/100
ca.
Order designation
L 6 M 8 x 1 PN 500 11.9 2.5 24.5 12 14 8 12 2.2 24-SWOSDS-L6-M8E
L 6 M 10 x 1 PN 500 13.9 2.5 24.5 14 14 8 15 2.6 24-SWOSDS-L6-M10E
L 8 M 12 x 1.5 PN 500 16.9 4.5 26.5 17 17 12 25 4.4 24-SWOSDS-L8-M12E
L 10 M 12 x 1.5 PN 500 16.9 6 26.5 17 19 12 25 4.8 24-SWOSDS-L10-M12E
L 10 M 14 x 1.5 PN 500 18.9 6 27.5 19 19 12 50 5.7 24-SWOSDS-L10-M14E
L 10 M 16 x 1.5 PN 400 21.9 6 30.5 22 19 12 70 4.0 24-SWOSDS-L10-M16E
L 12 M 16 x 1.5 PN 400 21.9 8 30.5 22 22 12 70 8.3 24-SWOSDS-L12-M16E
L 12 M 18 x 1.5 PN 400 23.9 8 30.5 24 22 12 90 10.3 24-SWOSDS-L12-M18E
L 12 M 22 x 1.5 PN 400 26.9 8 30.5 27 22 14 130 11.1 24-SWOSDS-L12-M22E
L 15 M 18 x 1.5 PN 400 23.9 10 31.5 24 27 12 90 11.9 24-SWOSDS-L15-M18E
L 15 M 22 x 1.5 PN 400 26.9 10 32.5 27 27 14 130 13.2 24-SWOSDS-L15-M22E
L 18 M 22 x 1.5 PN 400 26.9 13 31.5 27 32 14 130 15.3 24-SWOSDS-L18-M22E
L 18 M 26 x 1.5 PN 250 31.9 13 31.5 32 32 16 180 19.5 24-SWOSDS-L18-M26E
L 22 M 26 x 1.5 PN 250 31.9 17 32.5 32 36 16 180 20.2 24-SWOSDS-L22-M26E
L 28 M 33 x 2 PN 250 39.9 22 35 41 41 18 230 28.6 24-SWOSDS-L28-M33E
L 35 M 42 x 2 PN 250 49.9 28 42.5 50 50 20 330 50.0 24-SWOSDS-L35-M42E
L 42 M 48 x 2 PN 250 54.9 34 46.5 55 60 22 500 71.6 24-SWOSDS-L42-M48E

S 6 M 12 x 1.5 PN 800 16.9 2.5 27 17 17 12 50 4.7 24-SWOSDS-S6-M12E
S 6 M 16 x 1.5 PN 800 21.9 2.5 32 22 17 12 80 8.1 24-SWOSDS-S6-M16E
S 8 M 14 x 1.5 PN 800 18.9 4 29.5 19 19 12 60 6.4 24-SWOSDS-S8-M14E
S 8 M 16 x 1.5 PN 800 21.9 4 32 22 19 12 60 8.6 24-SWOSDS-S8-M16E
S 10 M 16 x 1.5 PN 800 21.9 6 32 22 22 12 80 9.0 24-SWOSDS-S10-M16E
S 12 M 16 x 1.5 PN 800 21.9 6 33 22 24 12 90 10.1 24-SWOSDS-S12-M16E
S 12 M 18 x 1.5 PN 630 23.9 8 34 24 24 12 90 11.1 24-SWOSDS-S12-M18E
S 14 M 20 x 1.5 PN 630 25.9 9 36.5 27 27 14 130 15.7 24-SWOSDS-S14-M20E
S 16 M 22 x 1.5 PN 630 26.9 11 37 27 30 14 130 17.6 24-SWOSDS-S16-M22E
S 20 M 27 x 2 PN 420 31.9 14 43 32 36 16 200 27.6 24-SWOSDS-S20-M27E
S 25 M 33 x 2 PN 420 39.9 18 48 41 46 18 250 50.5 24-SWOSDS-S25-M33E
S 30 M 42 x 2 PN 420 49.9 23 51 50 50 20 500 69.7 24-SWOSDS-S30-M42E
S 38 M 48 x 2 PN 420 54.9 30 60 55 60 22 600 76.4 24-SWOSDS-S38-M48E

EGE06LMED
ISO 8434-1-SWOSDS-L6xM10x1-E-St
168

dx
d2
d7
SW1
SW3
i
l
5
Series
Tube OD
-10 %
kg/100
ca.
Order designation
L 6 G 1/8 A PN 500 13.9 2.5 24.5 14 14 8 20 2.6 24-SWOSDS-L6-G1/8E
L 8 G 1/8 A PN 500 13.9 4 24 14 17 8 20 3.3 24-SWOSDS-L8-G1/8E
L 8 G 1/4 A PN 500 18.9 4.5 29.5 19 17 12 50 5.7 24-SWOSDS-L8-G1/4E
L 10 G 1/4 A PN 500 18.9 6 27.5 19 19 12 50 5.6 24-SWOSDS-L10-G1/4E
L 10 G 3/8 A PN 400 21.9 6 28 22 19 12 80 7.3 24-SWOSDS-L10-G3/8E
L 10 G 1/2 A PN 400 26.9 6 28.5 27 19 14 100 9.8 24-SWOSDS-L10-G1/2E
L 12 G 1/4 A PN 500 18.9 6 27.5 19 22 12 50 6.9 24-SWOSDS-L12-G1/4E
L 12 G 3/8 A PN 400 21.9 8 34 22 22 12 80 9.6 24-SWOSDS-L12-G3/8E
L 12 G 1/2 A PN 400 26.9 8 32 27 22 14 100 11.8 24-SWOSDS-L12-G1/2E
L 15 G 3/8 A PN 400 21.9 9 32.5 22 27 12 80 11.6 24-SWOSDS-L15-G3/8E
L 15 G 1/2 A PN 400 26.9 10 32 27 27 14 100 14.1 24-SWOSDS-L15-G1/2E
L 15 G 3/4 A PN 250 31.9 10 30.5 32 27 14 100 15.4 24-SWOSDS-L15-G3/4E
L 18 G 1/2 A PN 400 26.9 13 31.5 27 32 14 100 14.4 24-SWOSDS-L18-G1/2E
L 18 G 3/4 A PN 250 31.9 13 31 32 32 16 180 17.2 24-SWOSDS-L18-G3/4E
L 22 G 1/2 A PN 250 26.9 14 32 27 36 14 100 17.1 24-SWOSDS-L22-G1/2E
L 22 G 3/4 A PN 250 31.9 17 32.5 32 36 16 180 20.1 24-SWOSDS-L22-G3/4E
L 28 G 3/4 A PN 250 31.9 17 35 32 41 16 180 23.5 24-SWOSDS-L28-G3/4E
L 28 G 1 A PN 250 39.9 22 35 41 41 18 230 29.3 24-SWOSDS-L28-G1E
L 35 G 1 1/4 A PN 250 49.9 28 42.5 50 50 20 330 50.9 24-SWOSDS-L35-G11/4E
L 42 G 1 1/2 A PN 250 54.9 34 46.5 55 60 22 500 72.2 24-SWOSDS-L42-G11/2E

EGE06LRED
ISO 8434-1-SWOSDS-L6x1/8A-E-St
169
3

dx
d2
d7
SW1
SW3
i
l
5
Series
Tube OD
-10 %
kg/100
ca.
Order designation
S 6 G 1/4 A PN 800 18.9 2.5 27 19 17 12 60 5.4 24-SWOSDS-S6-G1/4E
S 8 G 1/4 A PN 800 18.9 4 29.5 19 19 12 60 6.4 24-SWOSDS-S8-G1/4E
S 10 G 1/4 A PN 800 18.9 5 32 19 22 12 60 8.7 24-SWOSDS-S10-G1/4E
S 10 G 3/8 A PN 800 21.9 6 32 22 22 12 90 9.4 24-SWOSDS-S10-G3/8E
S 12 G 1/4 A PN 630 18.9 5 30 19 24 12 60 7.9 24-SWOSDS-S12-G1/4E
S 12 G 3/8 A PN 630 21.9 8 34 22 24 12 90 10.0 24-SWOSDS-S12-G3/8E
S 12 G 1/2 A PN 630 26.9 8 35.5 27 24 14 150 14.4 24-SWOSDS-S12-G1/2E
S 14 G 1/2 A PN 630 26.9 9 36.5 27 27 14 150 16.4 24-SWOSDS-S14-G1/2E
S 16 G 1/2 A PN 630 26.9 11 37 27 30 14 150 17.1 24-SWOSDS-S16-G1/2E
S 16 G 3/4 A PN 420 31.9 11 39.5 32 30 16 200 24.4 24-SWOSDS-S16-G3/4E
S 20 G 1/2 A PN 420 26.9 12 43 27 36 14 150 21.2 24-SWOSDS-S20-G1/2E
S 20 G 3/4 A PN 420 31.9 14 43 32 36 16 200 27.2 24-SWOSDS-S20-G3/4E
S 25 G 3/4 A PN 420 31.9 16 48 32 46 16 200 39.7 24-SWOSDS-S25-G3/4E
S 25 G 1 A PN 420 39.9 18 48 41 46 18 250 50.6 24-SWOSDS-S25-G1E
S 30 G 1 A PN 420 39.9 18 51.5 41 50 18 250 54.4 24-SWOSDS-S30-G1E
S 30 G 1 1/4 A PN 420 49.9 23 51 50 50 20 500 68.5 24-SWOSDS-S30-G11/4E
S 38 G 1 1/4 A PN 420 49.9 25 54.5 50 60 22 600 78.9 24-SWOSDS-S38-G11/4E
S 38 G 1 1/2 A PN 420 54.9 30 60 55 60 22 600 95.5 24-SWOSDS-S38-G11/2E

Standard size
170
Reducing couplings

dy
d2
SW1
SW3
d1
l
2

Series
Tube OD
d1
Series
Tube OD
d2
ca.
Order designation
L 8 L 6 PN 500 4 23.5 12 17 2.9 24-SWOS-L8-L6
L 10 L 6 PN 500 4 25 14 19 3.8 24-SWOS-L10-L6
L 10 L 8 PN 500 6 25 14 19 3.8 24-SWOS-L10-L8
L 10 S 8 PN 500 5 28 17 19 4.9 24-SWOS-L10-S8
L 12 L 6 PN 400 4 25 17 22 5.0 24-SWOS-L12-L6
L 12 L 8 PN 400 6 25 17 22 5.1 24-SWOS-L12-L8
L 12 L 10 PN 400 8 26 17 22 5.2 24-SWOS-L12-L10
L 12 S 6 PN 400 4 28 17 22 5.6 24-SWOS-L12-S6
L 12 S 8 PN 400 5 28 17 22 6.0 24-SWOS-L12-S8
L 15 L 6 PN 400 4 28 19 27 8.7 24-SWOS-L15-L6
L 15 L 8 PN 400 6 28 19 27 8.8 24-SWOS-L15-L8
L 15 L 10 PN 400 8 29 19 27 8.9 24-SWOS-L15-L10
L 15 L 12 PN 400 10 29 19 27 9.0 24-SWOS-L15-L12
L 15 L 18 PN 400 10 31 27 27 11.8 24-SWOS-L15-L18
L 15 S 8 PN 400 5 30 19 27 9.4 24-SWOS-L15-S8
L 18 L 6 PN 400 4 28 24 32 11.1 24-SWOS-L18-L6
L 18 L 8 PN 400 6 28 24 32 11.1 24-SWOS-L18-L8
L 18 L 10 PN 400 8 29 24 32 11.2 24-SWOS-L18-L10
L 18 L 12 PN 400 10 29 24 32 11.3 24-SWOS-L18-L12
L 18 L 15 PN 400 12 30 24 32 11.8 24-SWOS-L18-L15
L 18 S 8 PN 400 5 30 24 32 11.6 24-SWOS-L18-S8
L 22 L 6 PN 250 4 32 27 36 15.4 24-SWOS-L22-L6
L 22 L 8 PN 250 6 32 27 36 15.5 24-SWOS-L22-L8
L 22 L 10 PN 250 8 33 27 36 15.7 24-SWOS-L22-L10
L 22 L 12 PN 250 10 33 27 36 16.1 24-SWOS-L22-L12
L 22 L 15 PN 250 12 34 27 36 16.2 24-SWOS-L22-L15
L 22 L 18 PN 250 15 33.5 27 36 16.6 24-SWOS-L22-L18
L 28 L 8 PN 250 6 34 32 41 20.1 24-SWOS-L28-L8
L 28 L 10 PN 250 8 35 32 41 20.1 24-SWOS-L28-L10
L 28 L 12 PN 250 10 35 32 41 20.1 24-SWOS-L28-L12
L 28 L 15 PN 250 12 36 32 41 20.6 24-SWOS-L28-L15
Example for comp. :
RED08/06LOMDVIT
171
3
Reducing couplings

dy
d2
SW1
SW3
d1
l
2

Series
Tube OD
d1
Series
Tube OD
d2
ca.
Order designation
L 28 L 18 PN 250 15 35.5 32 41 21.0 24-SWOS-L28-L18
L 28 L 22 PN 250 19 37.5 32 41 21.0 24-SWOS-L28-L22
L 28 S 16 PN 250 12 36.5 32 41 21.5 24-SWOS-L28-S16
L 28 S 20 PN 250 16 36.5 32 41 23.2 24-SWOS-L28-S20
L 35 L 6 PN 250 4 37 41 50 31.9 24-SWOS-L35-L6
L 35 L 8 PN 250 6 37 41 50 30.6 24-SWOS-L35-L8
L 35 L 10 PN 250 8 38 41 50 32.3 24-SWOS-L35-L10
L 35 L 12 PN 250 10 38 41 50 31.3 24-SWOS-L35-L12
L 35 L 15 PN 250 12 39 41 50 31.6 24-SWOS-L35-L15
L 35 L 18 PN 250 15 38.5 41 50 31.9 24-SWOS-L35-L18
L 35 L 22 PN 250 19 40.5 41 50 32.1 24-SWOS-L35-L22
L 35 L 28 PN 250 24 40.5 41 50 32.3 24-SWOS-L35-L28
L 42 L 6 PN 250 4 40.5 50 60 52.5 24-SWOS-L42-L6
L 42 L 8 PN 250 6 40.5 50 60 51.9 24-SWOS-L42-L8
L 42 L 10 PN 250 8 41.5 50 60 52.8 24-SWOS-L42-L10
L 42 L 12 PN 250 10 41.5 50 60 51.8 24-SWOS-L42-L12
L 42 L 15 PN 250 12 42.5 50 60 53.4 24-SWOS-L42-L15
L 42 L 18 PN 250 15 42 50 60 52.7 24-SWOS-L42-L18
L 42 L 22 PN 250 19 44 50 60 51.5 24-SWOS-L42-L22
L 42 L 28 PN 250 24 44 50 60 51.5 24-SWOS-L42-L28
L 42 L 35 PN 250 30 43 50 60 53.1 24-SWOS-L42-L35

172
Reducing couplings

dy
d2
SW1
SW3
d1
l
2

Series
Tube OD
d1
Series
Tube OD
d2
ca.
Order designation
S 8 S 6 PN 800 4 27 14 19 4.3 24-SWOS-S8-S6
S 10 S 6 PN 800 4 27.5 17 22 5.5 24-SWOS-S10-S6
S 10 S 8 PN 800 5 27.5 17 22 5.7 24-SWOS-S10-S8
S 12 S 6 PN 630 4 30 19 24 7.0 24-SWOS-S12-S6
S 12 S 8 PN 630 5 30 19 24 7.1 24-SWOS-S12-S8
S 12 S 10 PN 630 7 29.5 19 24 7.3 24-SWOS-S12-S10
S 14 S 6 PN 630 4 31.5 19 27 9.4 24-SWOS-S14-S6
S 14 S 8 PN 630 5 31.5 19 27 9.5 24-SWOS-S14-S8
S 14 S 10 PN 630 7 31 22 27 10.2 24-SWOS-S14-S10
S 14 S 12 PN 630 8 31 22 27 10.4 24-SWOS-S14-S12
S 16 L 12 PN 400 10 32 22 30 11.6 24-SWOS-S16-L12
S 16 L 15 PN 400 11 38.8 24 30 14.4 24-SWOS-S16-L15
S 16 S 6 PN 630 4 32 22 30 11.4 24-SWOS-S16-S6
S 16 S 8 PN 630 5 32 22 30 11.6 24-SWOS-S16-S8
S 16 S 10 PN 630 7 31.5 22 30 11.7 24-SWOS-S16-S10
S 16 S 12 PN 630 8 31.5 22 30 12.0 24-SWOS-S16-S12
S 16 S 14 PN 630 10 31.5 24 30 12.8 24-SWOS-S16-S14
S 20 L 15 PN 400 12 36 27 36 16.6 24-SWOS-S20-L15
S 20 S 6 PN 420 4 36 27 36 17.0 24-SWOS-S20-S6
S 20 S 8 PN 420 5 36 27 36 17.2 24-SWOS-S20-S8
S 20 S 10 PN 420 7 35.5 27 36 17.0 24-SWOS-S20-S10
S 20 S 12 PN 420 8 35.5 27 36 17.3 24-SWOS-S20-S12
S 20 S 16 PN 420 12 36.5 27 36 17.9 24-SWOS-S20-S16
S 25 L 18 PN 400 15 38 32 46 31.5 24-SWOS-S25-L18
S 25 S 6 PN 420 4 38.5 32 46 30.9 24-SWOS-S25-S6
S 25 S 8 PN 420 5 38.5 32 46 30.9 24-SWOS-S25-S8
S 25 S 10 PN 420 7 38 32 46 31.2 24-SWOS-S25-S10
S 25 S 12 PN 420 8 38 32 46 31.3 24-SWOS-S25-S12
S 25 S 16 PN 420 12 39 32 46 31.7 24-SWOS-S25-S16
S 25 S 20 PN 420 16 39 32 46 32.8 24-SWOS-S25-S20
S 30 L 22 PN 250 19 45.5 41 50 40.9 24-SWOS-S30-L22
173
3
Reducing couplings

dy
d2
SW1
SW3
d1
l
2

Series
Tube OD
d1
Series
Tube OD
d2
ca.
Order designation
S 30 S 6 PN 420 4 44 41 50 40.4 24-SWOS-S30-S6
S 30 S 8 PN 420 5 44 41 50 39.9 24-SWOS-S30-S8
S 30 S 10 PN 420 7 43.5 41 50 40.4 24-SWOS-S30-S10
S 30 S 12 PN 420 8 43.5 41 50 40.5 24-SWOS-S30-S12
S 30 S 16 PN 420 12 44.5 41 50 40.6 24-SWOS-S30-S16
S 30 S 20 PN 420 16 44.5 41 50 42.2 24-SWOS-S30-S20
S 30 S 25 PN 420 20 45 41 50 44.8 24-SWOS-S30-S25
S 38 S 6 PN 420 4 47.5 50 60 57.6 24-SWOS-S38-S6
S 38 S 8 PN 420 5 47.5 50 60 57.8 24-SWOS-S38-S8
S 38 S 10 PN 420 7 47 50 60 58.4 24-SWOS-S38-S10
S 38 S 12 PN 420 8 47 50 60 59.2 24-SWOS-S38-S12
S 38 S 16 PN 420 12 48 50 60 59.2 24-SWOS-S38-S16
S 38 S 20 PN 420 16 48 50 60 59.7 24-SWOS-S38-S20
S 38 S 25 PN 420 20 48.5 50 60 62.3 24-SWOS-S38-S25
S 38 S 30 PN 420 25 49 50 60 63.6 24-SWOS-S38-S30

174
Distance adapters

l
2
SW3
SW1
d1
dy
d1
Series
Tube OD
d1
Pressure dy l2 SW1 SW3 Nm -5
%
kg/100
ca.
Order designation
L 6 PN 500 2.5 36 12 14 20 3.7 24-SWOS-L6
L 8 PN 500 4 36 14 17 30 5.0 24-SWOS-L8
L 10 PN 500 6 36 17 19 40 6.6 24-SWOS-L10
L 12 PN 400 8 36 19 22 50 8.7 24-SWOS-L12
L 15 PN 400 10 36 24 27 70 13.2 24-SWOS-L15
L 18 PN 400 13 36 27 32 90 16.8 24-SWOS-L18
L 22 PN 250 17 40 32 36 120 23.0 24-SWOS-L22
L 28 PN 250 22 40 41 41 160 29.7 24-SWOS-L28
L 35 PN 250 28 50 46 50 250 49.0 24-SWOS-L35
L 42 PN 250 34 60 55 60 380 85.0 24-SWOS-L42

S 6 PN 800 2.5 36 14 17 25 5.3 24-SWOS-S6
S 8 PN 800 4 36 17 19 40 7.0 24-SWOS-S8
S 10 PN 800 6 36 19 22 50 8.7 24-SWOS-S10
S 12 PN 630 8 36 22 24 60 10.4 24-SWOS-S12
S 14 PN 630 9 40 24 27 75 14.7 24-SWOS-S14
S 16 PN 630 11 40 27 30 85 17.8 24-SWOS-S16
S 20 PN 420 14 46 32 36 140 28.0 24-SWOS-S20
S 25 PN 420 18 50 41 46 190 50.3 24-SWOS-S25
S 30 PN 420 23 56 46 50 270 65.6 24-SWOS-S30
S 38 PN 420 30 60 55 60 400 93.6 24-SWOS-S38

Example for comp. :
DA06LOMDCF
175
3
Adjustable couplings with lock nut

177
3
Adjustable elbow couplings with lock
nut
Standard profile seal ring and
O-ring material (internal sealing) is NBR

lg2
l2
SW2
SW4
dx
d2
d7
i
d
y
d
1
l
3
l
g
Series
Tube OD
d1
d2 Pressure d7 dx dy lg lg2 l2 l3 SW2 SW4 i kg/100
ca.
Order designation
L 6 M 10 x 1 PN 315 13.9 4.5 4 29.5 21 14 21.5 14 14 8 4.4 24-SDAE-L6-M10E
L 6 M 12 x 1.5 PN 315 16.9 6 4 36.5 21 14 24.5 14 17 12 5.8 24-SDAE-L6-M12E
L 6 M 14 x 1.5 PN 315 18.9 7 4 39 23 16 27 17 19 12 8.1 24-SDAE-L6-M14E
L 8 M 12 x 1.5 PN 315 16.9 6 6 36.5 23 16 24.5 14 17 12 6.1 24-SDAE-L8-M12E
L 10 M 14 x 1.5 PN 315 18.9 7.5 8 39 24 17 27 17 19 12 7.4 24-SDAE-L10-M14E
L 10 M 18 x 1.5 PN 315 23.9 11 8 42 28 28 30.1 22 19 11.9 13.6 24-SDAE-L10-M18E
L 12 M 16 x 1.5 PN 315 21.9 9 10 40 24 17 28 17 22 12 9.6 24-SDAE-L12-M16E
L 12 M 18 x 1.5 PN 315 23.9 11 10 32 28 21 30 22 24 12 14.6 24-SDAE-L12-M18E
L 15 M 18 x 1.5 PN 315 23.9 11 12 32 28 21 30 22 24 12 13.7 24-SDAE-L15-M18E
L 15 M 22 x 1.5 PN 315 26.9 14 12 46 29 22 32 22 27 14 16.4 24-SDAE-L15-M22E
L 18 M 18 x 1.5 PN 315 23.9 11 15 46 31 23.5 34 24 24 12 16.1 24-SDAE-L18-M18E
L 18 M 22 x 1.5 PN 315 26.9 14 15 49.5 33 25.5 35.5 27 27 14 24.6 24-SDAE-L18-M22E
L 18 M 26 x 1.5 PN 160 31.9 18 15 53 33 25.5 37 27 32 16 27.0 24-SDAE-L18-M26E
L 22 M 26 x 1.5 PN 160 31.9 18 19 53 35 27.5 37 27 32 16 24.2 24-SDAE-L22-M26E
L 22 M 27 x 2 PN 160 31.9 18 19 56 35 27.5 40 27 32 16 27.9 24-SDAE-L22-M27E
L 28 M 26 x 1.5 PN 160 31.9 18 24 59 38 30.5 43 36 32 16 36.3 24-SDAE-L28-M26E
L 28 M 33 x 2 PN 160 40.9 23 24 68.5 40 32.5 50.5 41 41 18 65.9 24-SDAE-L28-M33E
L 35 M 42 x 2 PN 160 49.9 30 30 75.5 46.5 36 55.5 50 50 20 103.9 24-SDAE-L35-M42E
L 42 M 48 x 2 PN 160 54.9 36 36 79.5 51 40 57.5 50 55 22 106.4 24-SDAE-L42-M48E

S 6 M 12 x 1.5 PN 315 16.9 4 4 36.5 23.5 16.5 24.5 14 17 12 6.9 24-SDAE-S6-M12E
S 8 M 14 x 1.5 PN 315 18.9 6 5 39 25 18 27 17 19 12 9.2 24-SDAE-S8-M14E
S 10 M 12 x 1.5 PN 315 16.9 6 7 38.5 25 17.5 26.5 17 17 12 7.9 24-SDAE-S10-M12E
S 10 M 16 x 1.5 PN 315 21.9 7 7 40 25 17.5 28 17 22 12 12.2 24-SDAE-S10-M16E
S 12 M 18 x 1.5 PN 315 23.9 9 8 42 29 21.5 30 22 24 12 17.1 24-SDAE-S12-M18E
S 16 M 22 x 1.5 PN 315 26.9 12 12 49.5 35 26.5 35.5 27 27 14 27.4 24-SDAE-S16-M22E
S 20 M 27 x 2 PN 250 31.9 15 16 56 38 27.5 40 27 32 16 34.3 24-SDAE-S20-M27E
S 25 M 33 x 2 PN 160 40.9 20 20 68.5 44 32 50.5 41 41 18 76.9 24-SDAE-S25-M33E
S 30 M 42 x 2 PN 160 49.9 26 25 75.5 50 36.5 55.5 50 50 20 121.4 24-SDAE-S30-M42E
S 38 M 48 x 2 PN 160 54.9 32 32 79.5 57 41 57.5 50 55 22 133.1 24-SDAE-S38-M48E

Standard size
178
nut
Standard profile seal ring and
O-ring material (internal sealing) is NBR

lg2
l2
SW2
SW4
dx
d2
d7
i
d
y
d
1
l
3
l
g
Series
Tube OD
d1
d2 Pressure d7 dx dy lg lg2 l2 l3 SW2 SW4 i kg/100
ca.
Order designation
L 6 G 1/8 A PN 315 13.9 4 4 29 21 14 21 14 14 8 4.1 24-SDAE-L6-G1/8E
L 6 G 1/4 A PN 315 18.9 7 4 38 23 16 26 17 19 12 7.8 24-SDAE-L6-G1/4E
L 8 G 1/4 A PN 315 18.9 7 6 38 23 16 26 17 19 12 7.9 24-SDAE-L8-G1/4E
L 8 G 3/8 A PN 315 21.9 9 6 41 25 18 29.1 19 22 11.9 11.0 24-SDAE-L8-G3/8E
L 10 G 1/4 A PN 315 18.9 7 8 38 24 17 26 17 19 12 7.9 24-SDAE-L10-G1/4E
L 12 G 1/4 A PN 315 18.9 7 10 48 24 17 26 17 19 12 7.6 24-SDAE-L12-G1/4E
L 12 G 3/8 A PN 315 21.9 10 10 41 26 19 29 19 22 12 11.2 24-SDAE-L12-G3/8E
L 12 G 1/2 A PN 250 26.9 12.5 10 44 28 21 30 22 27 14 15.4 24-SDAE-L12-G1/2E
L 15 G 1/2 A PN 250 26.9 12.5 12 44 28 21 30 22 27 14 15.3 24-SDAE-L15-G1/2E
L 18 G 1/2 A PN 250 26.9 12.5 15 51 33 25.5 37 27 27 14 25.9 24-SDAE-L18-G1/2E
L 18 G 3/4 A PN 160 32.9 15.5 15 55 33 25.5 39.1 27 36 15.9 32.6 24-SDAE-L18-G3/4E
L 22 G 1/2 A PN 160 26.9 12.5 19 51 35 27.5 37 27 27 14 24.5 24-SDAE-L22-G1/2E
L 22 G 3/4 A PN 160 35.9 18 19 55 35 27.5 39 27 36 16 33.6 24-SDAE-L22-G3/4E
L 28 G 3/4 A PN 160 35.9 15.5 24 60.5 38 30.5 44.5 36 36 16 43.7 24-SDAE-L28-G3/4E
L 28 G 1 A PN 160 40.9 21.5 24 68.5 40 32.5 50.5 41 41 18 70.5 24-SDAE-L28-G1E
L 35 G 1 1/4 A PN 160 49.9 27.5 30 76 46.5 36 56 50 50 20 111.5 24-SDAE-L35-G11/4E
L 42 G 1 1/2 A PN 160 54.9 33 36 79.5 51 40 57.5 50 55 22 115.4 24-SDAE-L42-G11/2E

S 6 G 1/4 A PN 315 18.9 6 4 38 25 18 26 17 19 12 8.7 24-SDAE-S6-G1/4E
S 8 G 1/4 A PN 315 18.9 7 5 38 25 18 26 17 19 12 8.5 24-SDAE-S8-G1/4E
S 10 G 3/8 A PN 315 21.9 10 7 41 27 19.5 29 19 22 12 12.1 24-SDAE-S10-G3/8E
S 12 G 3/8 A PN 315 21.9 10 8 41 29 21.5 29 19 22 12 12.1 24-SDAE-S12-G3/8E
S 14 G 1/2 A PN 315 26.9 10 10 44 30 22 30 24 27 14 19.3 24-SDAE-S14-G1/2E
S 16 G 1/2 A PN 315 26.9 10 12 51 35 26.5 37 27 27 14 27.3 24-SDAE-S16-G1/2E
S 16 G 3/4 A PN 250 35.9 15.5 12 55 35 26.5 39 27 36 16 35.3 24-SDAE-S16-G3/4E
S 20 G 3/4 A PN 250 35.9 15.5 16 55 38 27.5 39 27 36 16 36.2 24-SDAE-S20-G3/4E
S 25 G 3/4 A PN 250 35.9 15.5 20 60.5 42 30 44.5 36 36 16 46.5 24-SDAE-S25-G3/4E
S 25 G 1 A PN 250 40.9 21.5 20 68.5 44 32 50.5 41 41 18 75.0 24-SDAE-S25-G1E
S 30 G 1 1/4 A PN 160 49.9 27.5 25 76 50 36.5 56 50 50 20 118.7 24-SDAE-S30-G11/4E
S 38 G 1 1/2 A PN 160 54.9 33 32 79.5 57 41 57.5 50 55 22 129.5 24-SDAE-S38-G11/2E

Standard size
179
3
nut
Male thread: metric fine thread,
ISO 6149, parallel
Sealing with O-ring

SW2
lg2
l2
SW4
dx
d2
d8
l
g
l
3
i
d
y
d
1
Series
Tube OD
d1
d2 Pressure d8 dx dy lg lg2 l2 l3 SW2 SW4 i Nm
-10 %
kg/100
ca.
Order designation
L 6 M 10 x 1 PN 315 16.5 4.5 4 27 19 12 20 12 14 7 15 2.6 24-SDAE-L6-M10F
L 8 M 12 x 1.5 PN 315 20.2 6 6 32 21 14 22 12 17 10 25 3.7 24-SDAE-L8-M12F
L 10 M 12 x 1.5 PN 315 20.2 6 8 35 22 15 25 14 17 10 25 4.6 24-SDAE-L10-M12F
L 10 M 14 x 1.5 PN 315 22.2 7.5 8 35 22 15 25 14 19 10 35 4.8 24-SDAE-L10-M14F
L 10 M 18 x 1.5 PN 315 27.4 11 8 41 24 17 30 19 24 11 45 9.7 24-SDAE-L10-M18F
L 12 M 12 x 1.5 PN 315 20.2 6 10 36 24.5 17.5 26 17 17 10 25 5.4 24-SDAE-L12-M12F
L 12 M 16 x 1.5 PN 315 25.1 9 10 36 24 17 26 17 22 10 40 6.5 24-SDAE-L12-M16F
L 12 M 18 x 1.5 PN 315 27.4 11 26 41 26 19 30 19 24 11 45 10.0 24-SDAE-L12-M18F
L 15 M 18 x 1.5 PN 315 27.4 11 12 41 28 21 30 19 24 11 45 10.4 24-SDAE-L15-M18F
L 18 M 22 x 1.5 PN 315 30.4 14 15 45 31 23.5 33 24 27 12 60 15.7 24-SDAE-L18-M22F
L 22 M 27 x 2 PN 160 36.1 18 19 49 35 27.5 35 27 32 14 100 20.7 24-SDAE-L22-M27F
L 28 M 33 x 2 PN 160 43.8 23 24 52 38 30.5 38 36 41 14 160 34.5 24-SDAE-L28-M33F
L 35 M 42 x 2 PN 160 54.5 30 30 62 45 34.5 48 41 50 14 210 52.7 24-SDAE-L35-M42F
L 42 M 48 x 2 PN 160 59 36 36 65 51 40 49 50 55 16 260 81.3 24-SDAE-L42-M48F

S 6 M 12 x 1.5 PN 400 20.2 4 4 32 23 16 22 12 17 10 35 4.6 24-SDAE-S6-M12F
S 8 M 14 x 1.5 PN 400 22.2 6 5 36 24 17 26 14 19 10 45 6.4 24-SDAE-S8-M14F
S 10 M 16 x 1.5 PN 400 25.1 7 7 38 25 17.5 27 17 22 11 55 8.6 24-SDAE-S10-M16F
S 12 M 18 x 1.5 PN 400 27.4 9 8 43 29 21.5 31 17 24 12 70 11.6 24-SDAE-S12-M18F
S 16 M 22 x 1.5 PN 400 30.4 12 12 49 33 24.5 35 24 27 14 100 17.9 24-SDAE-S16-M22F
S 20 M 27 x 2 PN 400 36.1 15 16 55 37 26.5 39 27 32 16 170 28.7 24-SDAE-S20-M27F
S 25 M 33 x 2 PN 315 43.8 20 20 60 42 30 44 36 41 16 310 48.0 24-SDAE-S25-M33F
S 30 M 42 x 2 PN 250 54.5 26 25 68 49 35.5 51 41 50 17 330 76.5 24-SDAE-S30-M42F
S 38 M 48 x 2 PN 200 59 32 32 73 57 41 54 50 55 19 420 114.5 24-SDAE-S38-M48F

WEE06LMOROMD
180
Adjustable 45
elbow couplings with
lock nut
ISO 6149, parallel
Sealing with O-ring

dx
d2
d8
SW4
SW2
l
g
l
3

4
5

l
g
2
l
2
d
1
d
y
i
Series
Tube OD
d1
-10 %
kg/100
ca.
Order designation
L 6 M 10 x 1 PN 315 16.5 4.5 4 27 21 14 20 19 14 7 15 6.1 24-SDAE45-L6-M10F
L 8 M 12 x 1.5 PN 315 20.2 6 6 32 23 16 22 19 17 10 25 7.1 24-SDAE45-L8-M12F
L 10 M 14 x 1.5 PN 315 22.2 7.5 8 35 24 17 25 19 19 10 35 8.1 24-SDAE45-L10-M14F
L 12 M 16 x 1.5 PN 315 25.1 9 10 36 26 19 26 19 22 10 40 8.7 24-SDAE45-L12-M16F
L 15 M 18 x 1.5 PN 315 27.4 11 12 41 24 17 30 19 24 11 45 9.7 24-SDAE45-L15-M18F
L 18 M 22 x 1.5 PN 315 30.4 14 15 45 26.5 19 33 24 27 12 60 17.7 24-SDAE45-L18-M22F
L 22 M 27 x 2 PN 160 36.1 18 19 49 30 22.5 35 27 32 14 100 19.8 24-SDAE45-L22-M27F
L 28 M 33 x 2 PN 160 43.8 23 24 52 32 24.5 38 36 41 14 160 32.3 24-SDAE45-L28-M33F
L 35 M 42 x 2 PN 160 54.5 30 30 62 37.5 27 48 41 50 14 210 53.7 24-SDAE45-L35-M42F
L 42 M 48 x 2 PN 160 59 36 36 65 51 40 49 50 55 16 260 69.5 24-SDAE45-L42-M48F

S 6 M 12 x 1.5 PN 400 20.2 4 4 32 23.8 16 22 19 17 10 35 7.6 24-SDAE45-S6-M12F
S 8 M 14 x 1.5 PN 400 22.2 6 5 36 24 17 26 19 19 10 45 9.1 24-SDAE45-S8-M14F
S 10 M 16 x 1.5 PN 400 25.1 7 7 38 25.5 18 27 19 22 11 55 10.4 24-SDAE45-S10-M16F
S 12 M 18 x 1.5 PN 400 27.4 9 8 43 24.5 17 31 19 24 12 70 12.4 24-SDAE45-S12-M18F
S 16 M 22 x 1.5 PN 400 30.4 12 12 49 27.5 19 35 24 27 14 100 18.3 24-SDAE45-S16-M22F
S 20 M 27 x 2 PN 400 36.1 15 16 55 32 21.5 39 27 32 16 170 27.7 24-SDAE45-S20-M27F
S 25 M 33 x 2 PN 315 43.8 20 20 60 35 23 44 36 41 16 310 45.2 24-SDAE45-S25-M33F
S 30 M 42 x 2 PN 250 54.5 26 25 68 37.5 24 51 41 50 17 330 72.0 24-SDAE45-S30-M42F
S 38 M 48 x 2 PN 200 59 32 32 73 44 28 54 50 55 19 420 104.2 24-SDAE45-S38-M48F

Example for comp. :
VEE06LMOROMD
181
3
with lock nut
ISO 6149, parallel
Sealing with O-ring

l2
lg2
dx
d2
d8
SW4
SW2
l
g
l
3
d
y
d
1
i
Series
Tube OD
d1
-10 %
kg/100
ca.
Order designation
L 6 M 10 x 1 PN 315 16.5 4.5 4 48 21 14 20 14 14 7 15 4.8 24-SDAL-L6-M10F
L 8 M 12 x 1.5 PN 315 20.2 6 6 55 23 16 22 17 17 10 25 6.9 24-SDAL-L8-M12F
L 10 M 14 x 1.5 PN 315 22.2 7.5 8 59 24 17 25 17 19 10 35 7.0 24-SDAL-L10-M14F
L 12 M 16 x 1.5 PN 315 25.1 9 10 62 26 19 26 19 22 10 40 10.6 24-SDAL-L12-M16F
L 15 M 18 x 1.5 PN 315 27.4 11 12 69 28 21 30 19 24 11 45 12.2 24-SDAL-L15-M18F
L 18 M 22 x 1.5 PN 315 30.4 14 15 79 34 26.5 33 27 27 12 60 25.4 24-SDAL-L18-M22F
L 22 M 27 x 2 PN 160 36.1 18 19 84 35 27.5 35 27 32 14 100 28.2 24-SDAL-L22-M27F
L 28 M 33 x 2 PN 160 43.8 23 24 90 38 30.5 38 36 41 14 160 46.8 24-SDAL-L28-M33F
L 35 M 42 x 2 PN 160 54.5 30 30 107 45 34.5 48 41 50 14 210 90.1 24-SDAL-L35-M42F
L 42 M 48 x 2 PN 160 59 36 36 116 51 40 49 50 55 16 260 102.8 24-SDAL-L42-M48F

S 6 M 12 x 1.5 PN 400 20.2 4 4 55 23 16 22 17 17 10 35 7.5 24-SDAL-S6-M12F
S 8 M 14 x 1.5 PN 400 22.2 6 5 60 24 17 26 17 19 10 45 8.9 24-SDAL-S8-M14F
S 10 M 16 x 1.5 PN 400 25.1 7 7 65 27 19.5 27 19 22 11 55 13.4 24-SDAL-S10-M16F
S 12 M 18 x 1.5 PN 400 27.4 9 8 75 32 24.5 31 27 24 12 70 26.7 24-SDAL-S12-M18F
S 16 M 22 x 1.5 PN 400 30.4 12 12 82 33 24.5 35 22 27 14 100 30.2 24-SDAL-S16-M22F
S 20 M 27 x 2 PN 400 36.1 15 16 92 37 26.5 39 27 32 16 170 37.7 24-SDAL-S20-M27F
S 25 M 33 x 2 PN 315 43.8 20 20 102 42 30 44 36 41 16 310 66.7 24-SDAL-S25-M33F
S 30 M 42 x 2 PN 250 54.5 26 25 117 49 35.5 51 41 50 17 330 116.4 24-SDAL-S30-M42F
S 38 M 48 x 2 PN 200 59 32 32 130 57 41 54 50 55 19 420 151.4 24-SDAL-S38-M48F

Example for comp. :
LEE06LMOROMD
182
with lock nut
ISO 6149, parallel
Sealing with O-ring

lg
SW2
l2
SW4
dx
d2
d8
i
d
y
d
1
l
g
2
l
3
Series
Tube OD
d1
-10 %
kg/100
ca.
Order designation
L 6 M 10 x 1 PN 315 16.5 4.5 4 44 27 15 20 14 14 7 15 4.7 24-SDAT-L6-M10F
L 8 M 12 x 1.5 PN 315 20.2 6 6 44 32 15 22 14 17 10 25 5.5 24-SDAT-L8-M12F
L 10 M 14 x 1.5 PN 315 22.2 7.5 8 49 35 17.5 25 17 19 10 35 7.3 24-SDAT-L10-M14F
L 12 M 16 x 1.5 PN 315 25.1 9 10 54 36 20 26 19 22 10 40 10.8 24-SDAT-L12-M16F
L 15 M 18 x 1.5 PN 315 27.4 11 12 56 41 21 30 22 24 11 45 15.4 24-SDAT-L15-M18F
L 18 M 22 x 1.5 PN 315 30.4 14 15 66 45 25.5 33 27 27 12 60 81.3 24-SDAT-L18-M22F
L 22 M 27 x 2 PN 160 36.1 18 19 70 49 27.5 35 27 32 14 100 28.2 24-SDAT-L22-M27F
L 28 M 33 x 2 PN 160 43.8 23 24 76 52 30.5 38 36 41 14 160 47.3 24-SDAT-L28-M33F
L 35 M 42 x 2 PN 160 54.5 30 30 90 62 34.5 48 41 50 14 210 90.1 24-SDAT-L35-M42F
L 42 M 48 x 2 PN 160 59 36 36 102 65 40 49 50 55 16 260 102.8 24-SDAT-L42-M48F

S 6 M 12 x 1.5 PN 400 20.2 4 4 44 32 15 22 17 17 10 35 7.3 24-SDAT-S6-M12F
S 8 M 14 x 1.5 PN 400 22.2 6 5 54 36 20 26 19 19 10 45 12.4 24-SDAT-S8-M14F
S 10 M 16 x 1.5 PN 400 25.1 7 7 55 38 20 27 19 22 11 55 13.5 24-SDAT-S10-M16F
S 12 M 18 x 1.5 PN 400 27.4 9 8 58 43 21.5 31 22 24 12 70 18.7 24-SDAT-S12-M18F
S 16 M 22 x 1.5 PN 400 30.4 12 12 66 49 24.5 35 22 27 14 100 21.8 24-SDAT-S16-M22F
S 20 M 27 x 2 PN 400 36.1 15 16 74 55 26.5 39 27 32 16 170 37.7 24-SDAT-S20-M27F
S 25 M 33 x 2 PN 315 43.8 20 20 84 60 30 44 36 41 16 310 66.8 24-SDAT-S25-M33F
S 30 M 42 x 2 PN 250 54.5 26 25 98 68 35.5 51 41 50 17 330 116.8 24-SDAT-S30-M42F
S 38 M 48 x 2 PN 200 59 32 32 114 73 41 54 50 55 19 420 151.5 24-SDAT-S38-M48F

Example for comp. :
TEE06LMOROMD
183
3
Welding couplings

185
3
Straight welding couplings

d1
dy
SW1
d2
l
g
l
2
Series
Tube OD
d1
Pressure d2 dy lg l2 SW1 kg/100
ca.
Order designation
L 6 PN 315 10 4 21 14 12 1.0 24-WDS-L6-C00
L 8 PN 315 12 6 23 16 14 1.5 24-WDS-L8-C00
L 10 PN 315 14 8 25 18 17 2.1 24-WDS-L10-C00
L 12 PN 315 16 10 25 18 19 2.6 24-WDS-L12-C00
L 15 PN 315 19 12 29 22 22 4.3 24-WDS-L15-C00
L 18 PN 315 22 15 31 23.5 27 6.6 24-WDS-L18-C00
L 22 PN 160 27 19 36 28.5 32 9.7 24-WDS-L22-C00
L 28 PN 160 32 24 38 30.5 41 15.9 24-WDS-L28-C00
L 35 PN 160 40 30 43 32.5 46 22.8 24-WDS-L35-C00
L 42 PN 160 46 36 46 35 55 32.8 24-WDS-L42-C00

S 6 PN 630 11 4 26 19 14 2.1 24-WDS-S6-C00
S 8 PN 630 13 5 28 21 17 3.0 24-WDS-S8-C00
S 10 PN 630 15 7 30 22.5 19 4.0 24-WDS-S10-C00
S 12 PN 630 17 8 32 24.5 22 5.5 24-WDS-S12-C00
S 14 PN 630 19 10 35 27 24 7.0 24-WDS-S14-C00
S 16 PN 400 21 12 35 26.5 27 8.3 24-WDS-S16-C00
S 20 PN 400 26 16 40 29.5 32 12.9 24-WDS-S20-C00
S 25 PN 400 31 20 44 32 41 22.2 24-WDS-S25-C00
S 30 PN 400 36 25 49 35.5 46 29.5 24-WDS-S30-C00
S 38 PN 315 44 32 54 38 55 45.5 24-WDS-S38-C00

Example for comp. :
AS06LX
ISO 8434-1-WDS-L6-St
186
Welding bulkhead couplings

dy
d1
d2
l
g
l
2
Series
Tube OD
d1
Pressure d2 dy lg l2 kg/100
ca.
Order designation
L 6 PN 315 18 4 70 56 10.3 24-WDBHS-L6-C00
L 8 PN 315 20 6 70 56 12.1 24-WDBHS-L8-C00
L 10 PN 315 22 8 72 58 14.3 24-WDBHS-L10-C00
L 12 PN 315 25 10 72 58 17.7 24-WDBHS-L12-C00
L 15 PN 315 28 12 84 70 25.9 24-WDBHS-L15-C00
L 18 PN 315 32 15 84 69 33.4 24-WDBHS-L18-C00
L 22 PN 160 36 19 88 73 40.0 24-WDBHS-L22-C00
L 28 PN 160 40 24 88 73 44.5 24-WDBHS-L28-C00
L 35 PN 160 50 30 92 71 72.3 24-WDBHS-L35-C00
L 42 PN 160 60 36 92 70 100.5 24-WDBHS-L42-C00

S 6 PN 630 20 4 74 60 13.5 24-WDBHS-S6-C00
S 8 PN 630 22 5 74 60 16.2 24-WDBHS-S8-C00
S 10 PN 630 25 7 74 59 20.0 24-WDBHS-S10-C00
S 12 PN 630 28 8 74 59 25.0 24-WDBHS-S12-C00
S 14 PN 630 30 10 88 72 33.7 24-WDBHS-S14-C00
S 16 PN 400 35 12 88 71 44.4 24-WDBHS-S16-C00
S 20 PN 400 38 16 92 71 51.5 24-WDBHS-S20-C00
S 25 PN 400 45 20 96 72 72.3 24-WDBHS-S25-C00
S 30 PN 400 50 25 100 73 87.3 24-WDBHS-S30-C00
S 38 PN 315 60 32 104 72 125.1 24-WDBHS-S38-C00

Example for comp. :
ESV06LX
ISO 8434-1-WDBHS-L6-St
187
3
Welding nipples with O-ring seal

d1
d7
l
1
l
2
Series
Tube OD
d1
for tube Pressure d7 l1 l2 kg/100
ca.
O-ring
dimen-
sions
Order designation
L/S 6 6 x 1.5 PN 500 3 31 31.5 0.7 4 x 1.5 24-WDNPSO-6x1,5-C10
L/S 8 8 x 1.5 PN 400 5 31 31.5 1.1 6 x 1.5 24-WDNPSO-8x1,5-C10
L/S 8 8 x 2 PN 500 4 31 31.5 1.1 6 x 1.5 24-WDNPSO-8x2-C10
L/S 10 10 x 1 PN 250 8 32.5 33.5 1.3 7.5 x 1.5 24-WDNPSO-10x1-C10
L/S 10 10 x 1.5 PN 315 7 32.5 33.5 1.5 7.5 x 1.5 24-WDNPSO-10x1,5-C10
L/S 10 10 x 2 PN 400 6 32.5 33.5 1.6 7.5 x 1.5 24-WDNPSO-10x2-C10
L/S 10 10 x 2.5 PN 500 5 32.5 33.5 1.8 7.5 x 1.5 24-WDNPSO-10x2,5-C10
L/S 12 12 x 1.5 PN 315 9 32.5 33.5 1.9 9 x 1.5 24-WDNPSO-12x1,5-C10
L/S 12 12 x 2 PN 400 8 32.5 33.5 1.9 9 x 1.5 24-WDNPSO-12x2-C10
L/S 12 12 x 2.5 PN 400 7 32.5 33.5 2.2 9 x 1.5 24-WDNPSO-12x2,5-C10

L 15 15 x 2 PN 315 11 34.5 34.5 2.4 12 x 2 24-WDNPSO-15x2-C10
L 15 15 x 2.5 PN 315 10 34.5 34.5 2.9 12 x 2 24-WDNPSO-15x2,5-C10
L 18 18 x 2.5 PN 315 13 36 37 3.9 15 x 2 24-WDNPSO-18x2,5-C10
L 22 22 x 2.5 PN 160 17 38.5 39.5 5.2 20 x 2 24-WDNPSO-22x2,5-C10
L 28 28 x 2.5 PN 160 23 41.5 42.5 7.3 26 x 2 24-WDNPSO-28x2,5-C10
L 28 28 x 3 PN 160 22 41.5 42.5 8.4 26 x 2 24-WDNPSO-28x3-C10
L 35 35 x 3.5 PN 160 28 47.5 49.5 14.4 32 x 2.5 24-WDNPSO-35x3,5-C10
L 35 35 x 4 PN 160 27 47.5 49.5 16.0 32 x 2.5 24-WDNPSO-35x4-C10
L 42 42 x 3 PN 160 36 47.5 50 15.4 38 x 2.5 24-WDNPSO-42x3-C10
L 42 42 x 4 PN 160 34 47.5 50 19.5 38 x 2.5 24-WDNPSO-42x4-C10

Example for comp. :
SKA06X1.5
188
Welding nipples with O-ring seal

d1
d7
l
1
l
2
Series
Tube OD
d1
for tube Pressure d7 l1 l2 kg/100
ca.
O-ring
dimen-
sions
Order designation
S 14 14 x 2 PN 315 10 38.5 39.5 3.0 10 x 2 24-WDNPSO-14x2-C10
S 14 14 x 2.5 PN 400 9 38.5 39.5 3.1 10 x 2 24-WDNPSO-14x2,5-C10
S 14 14 x 3 PN 400 8 38.5 39.5 3.5 10 x 2 24-WDNPSO-14x3-C10
S 16 16 x 1.5 PN 250 13 39 41 3.1 12 x 2 24-WDNPSO-16x1,5-C10
S 16 16 x 2 PN 315 12 39 41 3.6 12 x 2 24-WDNPSO-16x2-C10
S 16 16 x 2.5 PN 400 11 39 41 3.6 12 x 2 24-WDNPSO-16x2,5-C10
S 16 16 x 3 PN 400 10 39 41 4.4 12 x 2 24-WDNPSO-16x3-C10
S 20 20 x 2 PN 250 16 45 47 6.0 16.3 x 2.4 24-WDNPSO-20x2-C10
S 20 20 x 2.5 PN 315 15 45 47 6.4 16.3 x 2.4 24-WDNPSO-20x2,5-C10
S 20 20 x 3 PN 400 14 45 47 6.4 16.3 x 2.4 24-WDNPSO-20x3-C10
S 20 20 x 4 PN 400 12 45 47 7.8 16.3 x 2.4 24-WDNPSO-20x4-C10
S 25 25 x 2.5 PN 250 20 50 53.5 10.1 20.3 x 2.4 24-WDNPSO-25x2,5-C10
S 25 25 x 3 PN 315 19 50 53.5 10.2 20.3 x 2.4 24-WDNPSO-25x3-C10
S 25 25 x 3.5 PN 315 18 50 53.5 10.0 20.3 x 2.4 24-WDNPSO-25x3,5-C10
S 25 25 x 4 PN 400 17 50 53.5 11.2 20.3 x 2.4 24-WDNPSO-25x4-C10
S 25 25 x 5 PN 400 15 50 53.5 13.1 20.3 x 2.4 24-WDNPSO-25x5-C10
S 30 30 x 3 PN 250 24 52 57 10.8 25.3 x 2.4 24-WDNPSO-30x3-C10
S 30 30 x 4 PN 315 22 52 57 14.5 25.3 x 2.4 24-WDNPSO-30x4-C10
S 30 30 x 5 PN 400 20 52 57 17.1 25.3 x 2.4 24-WDNPSO-30x5-C10
S 30 30 x 6 PN 400 18 52 57 19.5 25.3 x 2.4 24-WDNPSO-30x6-C10
S 38 38 x 3 PN 160 32 56.5 64 16.4 33.3 x 2.4 24-WDNPSO-38x3-C10
S 38 38 x 4 PN 315 30 56.5 64 20.6 33.3 x 2.4 24-WDNPSO-38x4-C10
S 38 38 x 5 PN 315 28 56.5 64 24.5 33.3 x 2.4 24-WDNPSO-38x5-C10
S 38 38 x 6 PN 315 26 56.5 64 28.1 33.3 x 2.4 24-WDNPSO-38x6-C10
S 38 38 x 7 PN 315 24 56.5 64 31.6 33.3 x 2.4 24-WDNPSO-38x7-C10

189
3
Female stud and gauge couplings

191
3
Straight female stud couplings
Internal thread: metric fine thread

d1
dy
SW1
d2
l
g
l
2
i
Series
Tube OD
d1
d2 Pressure dy lg l2 SW1 i kg/100
ca.
Order designation
L 6 M 10 x 1 PN 315 4 26.5 19.5 14 12.5 1.8 24-S-L6-IM10
L 8 M 10 x 1 PN 315 6 26.5 19.5 14 12.5 1.8 24-S-L8-IM10
L 8 M 12 x 1.5 PN 315 6 31 24 17 17 3.1 24-S-L8-IM12
L 10 M 14 x 1.5 PN 315 8 32 25 19 17 3.7 24-S-L10-IM14
L 12 M 16 x 1.5 PN 315 10 33 26 22 17 5.1 24-S-L12-IM16
L 15 M 18 x 1.5 PN 315 12 35 28 24 17 6.5 24-S-L15-IM18
L 18 M 22 x 1.5 PN 315 15 37 29.5 30 19 10.9 24-S-L18-IM22
L 22 M 26 x 1.5 PN 160 19 42 34.5 32 21 12.1 24-S-L22-IM26
L 28 M 33 x 2 PN 160 24 45 37.5 41 24 20.8 24-S-L28-IM33
L 35 M 42 x 2 PN 160 30 51 40.5 55 26 45.2 24-S-L35-IM42
L 42 M 48 x 2 PN 160 36 53 42 60 28 51.5 24-S-L42-IM48

S 6 M 10 x 1 PB 630 4 32.5 25.5 19 16.5 4.8 24-S-S6-IM10-WS19
S 6 M 12 x 1.5 PB 630 4 33 26 17 17 3.0 24-S-S6-IM12
S 8 M 14 x 1.5 PB 630 5 33 26 19 17 4.2 24-S-S8-IM14
S 10 M 16 x 1.5 PB 630 7 34 26.5 22 17 5.8 24-S-S10-IM16
S 12 M 18 x 1.5 PB 630 8 35 27.5 24 17 6.9 24-S-S12-IM18
S 14 M 20 x 1.5 PB 630 10 39 31 27 19 9.6 24-S-S14-IM20
S 16 M 22 x 1.5 PB 400 12 39 30.5 30 19 11.5 24-S-S16-IM22
S 20 M 27 x 2 PB 400 16 45 34.5 36 22 18.6 24-S-S20-IM27
S 25 M 33 x 2 PB 400 20 49 37 41 24 24.1 24-S-S25-IM33
S 30 M 42 x 2 PB 400 25 55 41.5 55 26 49.3 24-S-S30-IM48
S 38 M 48 x 2 PB 315 32 59 43 60 28 60.5 24-S-S38-IM48

Example for comp. :
GAI06LMX
192
Internal thread: Whitworth pipe thread

d1
dy
SW1
d2
l
g
l
2
i
Series
Tube OD
d1
ca.
Order designation
L 6 G 1/8 PN 315 4 26 19 14 12 1.8 24-S-L6-IG1/8
L 6 G 1/4 PN 315 4 31 24 19 7 3.7 24-S-L6-IG1/4
L 6 G 3/8 PN 315 4 33 26 24 7 6.4 24-S-L6-IG3/8
L 8 G 1/4 PN 315 6 31 24 19 17 3.8 24-S-L8-IG1/4
L 8 G 3/8 PN 315 6 32 25 24 17 6.2 24-S-L8-IG3/8
L 8 G 1/2 PN 315 6 36 29 27 7 7.9 24-S-L8-IG1/2
L 10 G 1/4 PN 315 8 32 25 19 17 3.9 24-S-L10-IG1/4
L 10 G 3/8 PN 315 8 33 26 24 17 6.2 24-S-L10-IG3/8
L 10 G 1/2 PN 315 8 37 30 27 20 8.1 24-S-L10-IG1/2
L 12 G 1/4 PN 315 9 32 25 19 17 4.0 24-S-L12-IG1/4
L 12 G 3/8 PN 315 10 33 26 24 17 6.2 24-S-L12-IG3/8
L 12 G 1/2 PN 315 10 38 31 27 20 8.4 24-S-L12-IG1/2
L 15 G 3/8 PN 315 12 34 27 24 7 6.8 24-S-L15-IG3/8
L 15 G 1/2 PN 315 12 38 31 27 20 8.6 24-S-L15-IG1/2
L 18 G 1/2 PN 315 15 38 30.5 27 20 8.9 24-S-L18-IG1/2
L 22 G 3/4 PN 160 19 43 35.5 36 22 17.3 24-S-L22-IG3/4
L 28 G 1 PN 160 24 45.5 38 41 24.5 20.9 24-S-L28-IG1
L 35 G 1 PN 160 30.5 47.5 37 46 10.5 32.4 24-S-L35-IG1
L 35 G 1 1/4 PN 160 30 51.5 41 55 26.5 45.7 24-S-L35-IG11/4
L 42 G 1 1/2 PN 160 36 53.5 42.5 60 28.5 52.8 24-S-L42-IG11/2

Example for comp. :
GAl06LRX
193
3

d1
dy
SW1
d2
l
g
l
2
i
Series
Tube OD
d1
ca.
Order designation
S 6 G 1/4 PB 630 4 33 26 19 17 4.2 24-S-S6-IG1/4
S 8 G 1/4 PB 630 5 33 26 19 17 4.4 24-S-S8-IG1/4
S 10 G 3/8 PB 630 7 34 26.5 24 17 6.9 24-S-S10-IG3/8
S 12 G 1/4 PB 630 8 34 26.5 22 17 6.8 24-S-S12-IG1/4
S 12 G 3/8 PB 630 8 34 26.5 24 17 7.1 24-S-S12-IG3/8
S 12 G 1/2 PB 630 8 38 30.5 27 20 8.8 24-S-S12-IG1/2
S 14 G 1/2 PB 630 10 40 32 27 20 9.4 24-S-S14-IG1/2
S 16 G 1/2 PB 400 12 40 31.5 27 20 9.3 24-S-S16-IG1/2
S 20 G 3/4 PB 400 16 45 34.5 36 22 18.9 24-S-S20-IG3/4
S 25 G 1 PB 400 20 49.5 37.5 41 24.5 24.0 24-S-S25-IG1
S 30 G 1 1/4 PB 400 25 55.5 42 55 26.5 50.3 24-S-S30-IG11/4
S 38 G 1 1/2 PB 315 32 59.5 43.5 60 28.5 61.5 24-S-S38-IG11/2

194
Gauge couplings

d3
d2
SW1
dy
d1
l
g
i
l
2
h
Series
Tube OD
d1
d2 Pressure d3 dy lg l2 SW1 h i kg/100
ca.
Order designation
L 6 G 1/4 PN 315 18.8 4 29 7.5 19 4.6 14.5 3.4 24-PGS-L6-IG1/4B
L 8 G 1/4 PN 315 18.8 6 29 7.5 19 4.6 14.5 3.6 24-PGS-L8-IG1/4B
L 10 G 1/4 PN 315 18.8 8 30 8.5 19 4.6 14.5 3.9 24-PGS-L10-IG1/4B
L 12 G 1/4 PN 315 18.8 10 30 8.5 19 4.6 14.5 4.0 24-PGS-L12-IG1/4B

S 6 G 1/2 PN 630 26.8 4 38 11 27 5.2 20 8.2 24-PGS-S6-IG1/2B
S 8 G 1/4 PN 630 18.8 5 31 9.5 19 4.6 14.5 4.2 24-PGS-S8-IG1/4B
S 8 G 1/2 PN 630 26.8 5 38 11 27 5.2 20 8.5 24-PGS-S8-IG1/2B
S 10 G 1/2 PN 630 26.8 7 38 10.5 27 5.2 20 8.8 24-PGS-S10-IG1/2B
S 12 G 1/4 PN 630 21.8 4 31 9 22 4.6 14.5 6.2 24-PGS-S12-IG1/4B
S 12 G 1/2 PN 630 26.8 8 38 10.5 27 5.2 20 9.0 24-PGS-S12-IG1/2B

Example for comp. :
MAV06LROMD
195
3
Gauge couplings

d3
d2
SW1
SW3
dy
d1
l
g
l
2
i
h
Series
Tube OD
d1
d2 Pressure d3 dy lg l2 SW1 SW3 h i kg/100
ca.
Order designation
L 6 G 1/8 PN 315 18.8 2.5 39 23.5 19 14 14.5 5.2 24-SWPGS-L6-IG1/8B
L 6 G 1/4 PN 315 18.8 2.5 38 23.5 19 14 4.6 14.5 4.8 24-SWPGS-L6-IG1/4B
L 8 G 1/4 PN 315 18.8 2.5 38 23.5 19 17 4.6 14.5 5.5 24-SWPGS-L8-IG1/4B
L 10 G 1/4 PN 315 18.8 2.5 39.5 25 19 19 4.6 14.5 6.2 24-SWPGS-L10-IG1/4B
L 12 G 1/4 PN 315 18.8 2.5 40.5 26 19 22 4.6 14.5 7.4 24-SWPGS-L12-IG1/4B

S 6 G 1/2 PN 630 26.8 2.5 45 25 27 17 5.2 20 9.9 24-SWPGS-S6-IG1/2B
S 8 G 1/2 PN 630 26.8 3.5 45 25 27 19 5.2 20 10.4 24-SWPGS-S8-IG1/2B
S 10 G 1/2 PN 630 26.8 3.5 47 27 27 22 5.2 20 12.0 24-SWPGS-S10-IG1/2B
S 12 G 1/2 PN 630 26.8 3.5 47.5 27.5 27 24 5.2 20 12.9 24-SWPGS-S12-IG1/2B

Example for comp. :
MAVEV06LR
L 6 (G 1/8) without sealing-edge ring.
196
Gauge couplings
Plug-in version with taper and O-ring

SW1
SW3
d2
dy
d1
l
1
l
2
i
h
Series
Tube OD
d1
d2 Pressure dy l1 l2 SW1 SW3 h i kg/100
ca.
Order designation
L 6 G 1/4 PN 315 2.5 37.5 23 19 14 4.6 14.5 4.8 24-SWOPGS-L6-IG1/4B
L 8 G 1/4 PN 315 4.5 37.5 23 19 17 4.6 14.5 5.5 24-SWOPGS-L8-IG1/4B
L 10 G 1/4 PN 315 6 36 21.5 19 19 4.6 14.5 5.8 24-SWOPGS-L10-IG1/4B
L 12 G 1/4 PN 315 8 36 21.5 19 22 4.6 14.5 6.9 24-SWOPGS-L12-IG1/4B
L 12 G 1/2 PN 630 3.5 42 22 27 22 5.2 20 11.4 24-SWOPGS-L12-IG1/2B
L 15 G 1/2 PN 315 3.5 44.5 24.5 27 27 5.2 20 14.2 24-SWOPGS-L15-IG1/2B

S 6 G 1/4 PN 630 2.5 35.5 21 19 17 4.6 14.5 5.4 24-SWOPGS-S6-IG1/4B
S 6 G 1/2 PN 630 2.5 44.5 24.5 27 17 5.2 20 10.3 24-SWOPGS-S6-IG1/2B
S 8 G 1/4 PN 630 4 35.5 21 19 19 4.6 14.5 5.7 24-SWOPGS-S8-IG1/4B
S 8 G 1/2 PN 630 4 44.5 24.5 27 19 5.2 20 11.7 24-SWOPGS-S8-IG1/2B
S 10 G 1/4 PN 630 2.5 39 24.5 19 22 4.6 14.5 7.8 24-SWOPGS-S10-IG1/4B
S 10 G 1/2 PN 630 6 43.5 23.5 27 22 5.2 20 11.3 24-SWOPGS-S10-IG1/2B
S 12 G 1/4 PN 630 8 39 24.5 19 24 4.6 14.5 8.2 24-SWOPGS-S12-IG1/4B
S 12 G 1/2 PN 630 8 45 25 27 24 5.2 20 12.2 24-SWOPGS-S12-IG1/2B

Example for comp. :
MAVE06LRVIT
197
3
Thread reducing couplings
Both threads: Whitworth pipe thread, parallel

d1 E
SW1
dx
d2
d6
i
1
i
2
l
1
d1
SW1
dx
d2
d6
F
l
1
i
2
i
1
Male thread
d2
Female thread
d1
Pressure d6 dx l1 SW1 i1 i2 Form Nm
-10 %
kg/100
ca.
Order designation
G 1/8 A G 1/4 PB 630 14 4 31 19 17 8 F 25 3.7 GP-SDS-G1/8B-IG1/4
G 3/8 A G 1/8 PB 400 22 8.5 22.5 22 8 12 E 110 3.9 GP-SDS-G3/8B-IG1/8
G 1/2 A G 1/8 PB 400 26 8.5 24 27 8 14 E 200 6.6 GP-SDS-G1/2B-IG1/8
G 1/2 A G 1 PB 400 26 12 49 41 24.5 14 F 200 22.1 GP-SDS-G1/2B-IG1
G 1/2 A G 1 1/4 PB 250 26 10 53 55 26.5 14 F 200 48.0 GP-SDS-G1/2B-IG11/4
G 3/4 A G 3/8 PB 400 32 15 26 32 12 16 E 320 8.7 GP-SDS-G3/4B-IG3/8
G 3/4 A G 1 PB 400 32 16 51 41 24.5 16 F 320 23.7 GP-SDS-G3/4B-IG1
G 1 A G 1/4 PB 400 39 11.5 29 41 12 18 E 500 19.5 GP-SDS-G1B-IG1/4
G 1 A G 3/8 PB 400 39 15 29 41 12 18 E 500 17.9 GP-SDS-G1B-IG3/8
G 1 A G 1/2 PB 400 39 19 29 41 14 18 E 500 15.4 GP-SDS-G1B-IG1/2
G 1 A G 3/4 PB 400 39 20 47 41 22 18 F 500 27.3 GP-SDS-G1B-IG3/4
G 1 A G 1 1/4 PB 250 39 20 57 55 26.5 18 F 500 50.9 GP-SDS-G1B-IG11/4
G 1 A G 1 1/2 PB 250 39 20 59 60 28.5 18 F 500 58.6 GP-SDS-G1B-IG11/2
Thread reducing adapters with
metric threads available upon request.
Example for comp. :
Rl1/8X1/4X
198

d1 E
SW1
dx
d2
d6
i
1
i
2
l
1
d1
SW1
dx
d2
d6
F
l
1
i
2
i
1
Male thread
d2
Female thread
d1
-10 %
kg/100
ca.
Order designation
G 1 1/4 A G 1/2 PB 250 49 19 32 50 14 20 E 600 31.0 GP-SDS-G11/4B-IG1/2
G 1 1/4 A G 1 PB 250 49 25 52 50 24.5 20 F 600 45.8 GP-SDS-G11/4B-IG1
G 1 1/4 A G 1 1/2 PB 250 49 25 60 60 28.5 20 F 600 62.1 GP-SDS-G11/4B-IG11/2
G 1 1/2 A G 1 PB 250 55 30.5 36 55 18 22 E 800 34.0 GP-SDS-G11/2B-IG1
G 1 1/2 A G 1 1/4 PB 250 55 32 58 55 26.5 22 F 800 52.7 GP-SDS-G11/2B-IG11/4

199
3

d1
SW1
dx
d2
d7
E
l
1
i
2
i
1
d1
SW1
dx
d2
d7
F
l
1
i
2
i
1
Male thread
d2
Female thread
d1
-10 %
kg/100
ca.
Order designation
G 1/8 A G 1/4 PN 630 13.9 4 32.5 19 17 8 F 20 4.2 GP-SDS-G1/8E-IG1/4
G 3/8 A G 1/8 PN 630 21.9 8.5 22.5 22 8 12 E 90 3.8 GP-SDS-G3/8E-IG1/8
G 1/2 A G 1/8 PN 630 26.9 8.5 24 27 8 14 E 150 6.5 GP-SDS-G1/2E-IG1/8
G 1/2 A G 1/2 PN 630 26.9 12 42 30 20 14 F 150 12.3 GP-SDS-G1/2E-IG1/2
G 1/2 A G 1 PN 400 26.9 12 50.5 41 24.5 14 F 150 23.7 GP-SDS-G1/2E-IG1
G 1/2 A G 1 1/4 PN 400 26.9 12 54.5 55 26.5 14 F 150 50.3 GP-SDS-G1/2E-IG11/4
G 3/4 A G 3/8 PN 400 31.9 15 26 32 12 16 E 200 8.5 GP-SDS-G3/4E-IG3/8
G 3/4 A G 1 PN 400 31.9 16 52.5 41 24.5 16 F 200 24.7 GP-SDS-G3/4E-IG1
Thread reducing adapters with
metric threads available upon request.
Example for comp. :
Rl1/8EDX1/4
200

d1
SW1
dx
d2
d7
E
l
1
i
2
i
1
d1
SW1
dx
d2
d7
F
l
1
i
2
i
1
Male thread
d2
Female thread
d1
-10 %
kg/100
ca.
Order designation
G 1 A G 1/4 PN 400 39.9 11.5 29 41 12 18 E 250 19.3 GP-SDS-G1E-IG1/4
G 1 A G 3/8 PN 400 39.9 15 29 41 12 18 E 250 17.8 GP-SDS-G1E-IG3/8
G 1 A G 3/4 PN 400 39.9 20 49 41 22 18 F 250 28.6 GP-SDS-G1E-IG3/4
G 1 A G 1 1/4 PN 400 39.9 20 59 55 26.5 18 F 250 54.9 GP-SDS-G1E-IG11/4
G 1 1/4 A G 1/2 PN 400 49.9 19 32 50 14 20 E 500 30.9 GP-SDS-G11/4E-IG1/2
G 1 1/4 A G 1 PN 400 49.9 25 54 50 24.5 20 F 500 48.2 GP-SDS-G11/4E-IG1
G 1 1/4 A G 1 1/2 PN 315 49.9 25 62 60 28.5 20 F 500 65.9 GP-SDS-G11/4E-IG11/2
G 1 1/2 A G 1 PN 315 54.9 30.5 36 55 18 22 E 600 33.6 GP-SDS-G11/2E-IG1
G 1 1/2 A G 1 1/4 PN 315 54.9 32 60 55 26.5 22 F 600 55.3 GP-SDS-G11/2E-IG11/4
G 2 A G 1 PN 160 74.9 30.5 45 75 18 24 E 700 101.9 GP-SDS-G2E-IG1
G 2 A G 1 1/4 PN 160 74.9 39 45 75 26.5 24 E 700 85.2 GP-SDS-G2E-IG11/4

201
3
Straight adapter ISO 6149 / DIN 3852
Both threads: metric fine thread, parallel

d1
SW1
dx
d2
d8
i
1
i
2
l
g
Male thread
d2
Female thread
d1
Pressure d6 dx l1 SW1 i1 i2 Nm
-10 %
kg/100
ca.
Order designation
M 10 x 1 M 10 x 1 PB 630 13.8 3 24 17 11 8.5 15 2.6 GP-SDS-M10F-IM10
M 12 x 1.5 M 12 x 1.5 PB 630 16.8 4 32.5 19 16 11 25 4.4 GP-SDS-M12F-IM12
M 14 x 1.5 M 14 x 1.5 PB 630 18.8 6 31.5 22 16 11 35 5.6 GP-SDS-M14F-IM14
M 16 x 1.5 M 16 x 1.5 PB 630 21.8 7 33 24 16 11.5 40 7.1 GP-SDS-M16F-IM16
M 18 x 1.5 M 18 x 1.5 PB 630 23.8 9 34 27 16 12.5 45 8.8 GP-SDS-M18F-IM18
M 22 x 1.5 M 22 x 1.5 PB 630 26.8 12 37 32 18 13 60 13.0 GP-SDS-M22F-IM22
M 27 x 2 M 26 x 1.5 PB 400 31.8 15 44 36 21 16 100 19.4 GP-SDS-M27F-IM26
M 27 x 2 M 27 x 2 PB 400 31.8 15 44 36 21 16 100 19.0 GP-SDS-M27F-IM27
M 48 x 2 M 48 x 2 PB 250 54.8 32 53.5 60 27 17.5 260 56.5 GP-SDS-M48F-IM48

202
Blanking screws
For threaded holes according to DIN 3852 / ISO 9974
Thread: metric fine thread, parallel

d2
d5
I-SW
N
l
1
i
d2
d7
I-SW
SW
V
l
1
i
d2 Pressure d5 d7 l1 SW I-SW i Form Nm
-10 %
kg/100
ca.
Order designation
M 8 x 1 PN 400 12 12.3 4 8 N 10 0.5 GP-PLIH-M8E-C21
M 10 x 1 PN 400 14 12.3 5 8 N 12 0.7 GP-PLIH-M10E-C21
M 10 x 1 PN 400 13.9 18 14 8 V 12 1.6 GP-PLEH-M10E-C21
M 12 x 1.5 PN 400 17 17.3 6 12 N 23 1.4 GP-PLIH-M12E-C21
M 14 x 1.5 PN 400 19 17.3 6 12 N 30 1.9 GP-PLIH-M14E-C21
M 14 x 1.5 PN 400 18.9 22 19 12 V 30 3.4 GP-PLEH-M14E-C21
M 16 x 1.5 PN 400 21.9 17.3 8 12 N 50 2.4 GP-PLIH-M16E-C21
M 18 x 1.5 PN 400 23.9 17.3 8 12 N 65 3.2 GP-PLIH-M18E-C21
M 18 x 1.5 PN 400 23.9 22 24 12 V 65 5.6 GP-PLEH-M18E-C21
M 20 x 1.5 PN 400 25.9 19.3 10 14 N 75 4.0 GP-PLIH-M20E-C21
M 22 x 1.5 PN 400 27 19.3 10 14 N 90 5.0 GP-PLIH-M22E-C21
M 24 x 1.5 PN 400 29.9 19.3 12 14 N 90 5.8 GP-PLIH-M24E-C21
M 26 x 1.5 PN 400 31.9 21.3 12 16 N 110 7.4 GP-PLIH-M26E-C21
M 27 x 2 PN 400 32 21.3 12 16 N 130 7.7 GP-PLIH-M27E-C21
M 33 x 2 PN 400 39.9 22.8 17 16 N 225 12.4 GP-PLIH-M33E-C21
M 33 x 2 PN 400 46 33 46 17 18 V 250 27.4 GP-PLEH-M33E-C21
M 42 x 2 PN 400 57 38 60 22 20 V 400 53.4 GP-PLEH-M42E-C21
M 42 x 2 PN 315 49.9 22.8 22 16 N 310 18.6 GP-PLIH-M42E-C21
M 48 x 2 PN 400 64 40 65 24 22 V 500 69.2 GP-PLEH-M48E-C21
M 48 x 2 PN 315 55 22.8 24 16 N 380 24.4 GP-PLIH-M48E-C21

Example for comp. :
VSTI8X1ED
Threaded holes as spec. in
DIN 3852. form X.
d5 = d4 narrow
203
3
Blanking screws
For threaded holes according to DIN 3852 / ISO 1179
Thread: Whitworth pipe thread, parallel

d2
d5
I-SW
N
l
1
i
d2
d7
I-SW
SW
V
l
1
i
d2 Pressure d5 d7 l1 SW I-SW i Form Nm
-10 %
kg/100
ca.
Order designation
G 1/8 A PN 400 14 12.3 5 8 N 12 0.7 GP-PLIH-G1/8E-C21
G 1/4 A PN 400 18.9 17.3 6 12 N 25 1.8 GP-PLIH-G1/4E-C21
G 3/8 A PN 400 22 17.3 8 12 N 50 2.7 GP-PLIH-G3/8E-C21
G 1/2 A PN 400 26.9 19.3 10 14 N 70 4.4 GP-PLIH-G1/2E-C21
G 3/4 A PN 400 32 21.3 12 16 N 120 7.5 GP-PLIH-G3/4E-C21
G 1 A PN 400 39.9 22.8 17 16 N 200 12.3 GP-PLIH-G1E-C21
G 1 A PN 400 46 33 46 17 18 V 250 27.2 GP-PLEH-G1E-C21
G 1 1/4 A PN 400 57 38 60 22 20 V 400 54.3 GP-PLEH-G11/4E-C21
G 1 1/4 A PN 315 49.9 22.8 22 16 N 320 19.4 GP-PLIH-G11/4E-C21
G 1 1/2 A PN 400 64 40 65 24 22 V 500 69.3 GP-PLEH-G11/2E-C21
G 1 1/2 A PN 315 55 22.8 24 16 N 400 25.2 GP-PLIH-G11/2E-C21

Example for comp. :
VSTI1/8ED
Threaded holes as spec. in
DIN 3852. form X.
d5 = d4 narrow
204
Blanking screws
ISO 6149
Sealing with O-ring

d2
d5
I-SW
l
1
i
d2 Pressure d5 l1 I-SW i Nm
-10 %
kg/100
ca.
Order designation
M 10 x 1 PN 630 14 13 5 9.5 18 0.8 GP-PLIH-M10F-C21
M 12 x 1.5 PN 630 17 15.5 6 11 40 1.4 GP-PLIH-M12F-C21
M 14 x 1.5 PN 630 19 16 6 11 55 2.0 GP-PLIH-M14F-C21
M 16 x 1.5 PN 630 22 17.5 8 12.5 70 2.8 GP-PLIH-M16F-C21
M 18 x 1.5 PN 630 24 19 8 14 90 3.9 GP-PLIH-M18F-C21
M 22 x 1.5 PN 630 27 20 10 15 130 5.7 GP-PLIH-M22F-C21
M 26 x 1.5 PN 400 31 21 12 16 150 8.0 GP-PLIH-M26F-C21
M 27 x 2 PN 400 32 23.5 12 18.5 180 9.6 GP-PLIH-M27F-C21
M 33 x 2 PN 400 41 24.5 17 18.5 310 15.1 GP-PLIH-M33F-C21
M 42 x 2 PN 400 50 25 17 19 400 26.2 GP-PLIH-M42F-C21
M 48 x 2 PN 400 55 27.5 17 21.5 500 37.9 GP-PLIH-M48F-C21

Example for comp. :
VSTI10X1OR
205
3
Blanking plugs
With sealing edge
For blind connections of tube couplings

d1
l
1
Series
Tube OD
d1
Pressure l1 kg/100
ca.
Order designation
L/S 6 PN 315/630 19.5 0.5 24-PLB-L/S6
L/S 8 PN 315/630 19.5 0.8 24-PLB-L/S8
L/S 10 PN 315/630 21 1.3 24-PLB-L/S10
L/S 12 PN 315/630 21.8 2.0 24-PLB-L/S12

L 15 PN 315 22 3.0 24-PLB-L15
L 18 PN 315 24 4.6 24-PLB-L18
L 22 PN 160 26 7.4 24-PLB-L22
L 28 PN 160 26.5 11.5 24-PLB-L28
L 35 PN 160 32 22.1 24-PLB-L35
L 42 PN 160 32.5 31.5 24-PLB-L42

S 14 PN 630 23.5 2.9 24-PLB-S14
S 16 PN 400 25.5 4.0 24-PLB-S16
S 20 PN 400 30.5 7.4 24-PLB-S20
S 25 PN 400 32.5 11.8 24-PLB-S25
S 30 PN 400 35.5 18.3 24-PLB-S30
S 38 PN 315 40 33.1 24-PLB-S38

Example for comp. :
BUZ06LX
206
Blanking plugs

d1
l
1
Series
Tube OD
d1
Pressure l1 kg/100
ca.
Order designation
L/S 6 PN 500/800 19 0.6 24-PLO-L/S6
L/S 8 PN 500/800 19 1.0 24-PLO-L/S8
L/S 10 PN 500/800 21 1.6 24-PLO-L/S10
L/S 12 PN 400/630 21.5 2.2 24-PLO-L/S12

L 15 PN 400 21 3.2 24-PLO-L15
L 18 PN 400 23.5 5.1 24-PLO-L18
L 22 PN 250 26 8.1 24-PLO-L22
L 28 PN 250 26.5 13.0 24-PLO-L28
L 35 PN 250 32 24.0 24-PLO-L35
L 42 PN 250 32.5 34.6 24-PLO-L42

S 14 PN 630 24 3.2 24-PLO-S14
S 16 PN 630 25 4.1 24-PLO-S16
S 20 PN 420 30.5 8.0 24-PLO-S20
S 25 PN 420 32.5 12.4 24-PLO-S25
S 30 PN 420 35.5 18.2 24-PLO-S30
S 38 PN 420 40.5 31.5 24-PLO-S38

Example for comp. :
VKA06VIT
207
3
Blanking plugs

d1
d3
SW3
l
1
Series
Tube OD
d1
d3 Pressure l1 SW3 kg/100
ca.
Order designation
L 6 M 12 x 1.5 PN 500 19 14 1.6 24-PLOC-L6
L 8 M 14 x 1.5 PN 500 19 17 2.5 24-PLOC-L8
L 10 M 16 x 1.5 PN 500 20.5 19 3.4 24-PLOC-L10
L 12 M 18 x 1.5 PN 400 21 22 4.8 24-PLOC-L12
L 15 M 22 x 1.5 PN 400 21 27 7.5 24-PLOC-L15
L 18 M 26 x 1.5 PN 400 23.5 32 11.4 24-PLOC-L18
L 22 M 30 x 2 PN 250 26 36 16.3 24-PLOC-L22
L 28 M 36 x 2 PN 250 26.5 41 21.7 24-PLOC-L28
L 35 M 45 x 2 PN 250 32 50 37.4 24-PLOC-L35
L 42 M 52 x 2 PN 250 32.5 60 55.9 24-PLOC-L42

S 6 M 14 x 1.5 PN 800 19 17 2.4 24-PLOC-S6
S 8 M 16 x 1.5 PN 800 19 19 3.1 24-PLOC-S8
S 10 M 18 x 1.5 PN 800 21 22 4.7 24-PLOC-S10
S 12 M 20 x 1.5 PN 630 21.5 24 5.7 24-PLOC-S12
S 14 M 22 x 1.5 PN 630 24 27 8.5 24-PLOC-S14
S 16 M 24 x 1.5 PN 630 25 30 10.7 24-PLOC-S16
S 20 M 30 x 2 PN 420 30.5 36 18.3 24-PLOC-S20
S 25 M 36 x 2 PN 420 32.5 46 33.0 24-PLOC-S25
S 30 M 42 x 2 PN 420 35.5 50 39.8 24-PLOC-S30
S 38 M 52 x 2 PN 420 40.5 60 62.8 24-PLOC-S38

Example for comp. :
VKAM06LVIT
208
Tube blanking screws

l2
SW1
Series
Tube OD
Pressure l2 SW1 kg/100
ca.
Order designation
L 6 PN 315 7 12 0.8 24-TBS-L6
L 8 PN 315 8 14 1.2 24-TBS-L8
L 10 PN 315 9 17 1.6 24-TBS-L10
L 12 PN 315 10 19 2.2 24-TBS-L12
L 15 PN 315 11 24 3.8 24-TBS-L15
L 18 PN 315 11.5 27 5.4 24-TBS-L18
L 22 PN 160 13.5 32 7.7 24-TBS-L22
L 28 PN 160 14.5 41 13.3 24-TBS-L28
L 35 PN 160 14.5 46 20.1 24-TBS-L35
L 42 PN 160 16 55 34.0 24-TBS-L42

S 6 PN 630 11 14 1.6 24-TBS-S6
S 8 PN 630 13 17 2.6 24-TBS-S8
S 10 PN 630 12.5 19 3.1 24-TBS-S10
S 12 PN 630 14.5 22 4.5 24-TBS-S12
S 14 PN 630 16 24 5.9 24-TBS-S14
S 16 PN 400 15.5 27 6.8 24-TBS-S16
S 20 PN 400 17.5 32 12.0 24-TBS-S20
S 25 PN 400 20 41 21.3 24-TBS-S25
S 30 PN 400 20.5 46 28.1 24-TBS-S30
S 38 PN 315 23 55 49.8 24-TBS-S38

Example for comp. :
ROV06LX
209
3
Hexagonal nuts
For bulkhead couplings

d3
SW4
h
d3 SW4 h kg/100
ca.
Order designation
M 12 x 1.5 17 6 0.7 24-LN-L6-M12
M 14 x 1.5 19 6 0.8 24-LN-L8-S6-M14
M 16 x 1.5 22 6 1.0 24-LN-L10-S8-M16
M 18 x 1.5 24 6 1.2 24-LN-L12-S10-M18
M 20 x 1.5 27 6 1.5 24-LN-S12-M20
M 22 x 1.5 30 7 2.2 24-LN-L15-S14-M22
M 24 x 1.5 32 7 2.4 24-LN-S16-M24
M 26 x 1.5 36 8 3.8 24-LN-L18-M26
M 30 x 2 41 8 4.9 24-LN-L22-S20-M30
M 36 x 2 46 9 5.9 24-LN-L28-S25-M36
M 42 x 2 50 9 5.8 24-LN-S30-M42
M 45 x 2 55 9 7.5 24-LN-L35-M45
M 52 x 2 65 10 12.1 24-LN-L42-S38-M52

Example for comp. :
GM06LX
ISO 8434-1-LN-L6-St
210
Reinforcing sleeves
For thin-walled steel tubes
Material: brass

d
d4
l
for tube OD x wall thickness d d4 l kg/100
ca.
Order designation
6 x 1 4 2.6 15.5 0.1 24-RS-4-BS
6 x 0.75 4.5 3.1 12.5 0.1 24-RS-4,5-BS
6 x 0.5 5 3.6 12.5 0.1 24-RS-5-BS
8 x 1 6 4.6 15.5 0.2 24-RS-6-BS
8 x 0.75 6.5 5.1 12.5 0.1 24-RS-6,5-BS
10 x 1.5 7 5.6 17 0.2 24-RS-7-BS
10 x 1 8 6.6 16.5 0.2 24-RS-8-BS
10 x 0.75 8.5 7.1 16.5 0.2 24-RS-8,5-BS
12 x 1.5 9 7.6 16.5 0.3 24-RS-9-BS
12 x 1 10 8.6 16.5 0.3 24-RS-10-BS
12 x 0.75 10.5 9.3 16.5 0.3 24-RS-10,5-BS
14 x 1 / 15 x 1.5 12 10.2 18 0.5 24-RS-12-BS
15 x 1 / 16 x 1.5 13 11.2 17 0.5 24-RS-13-BS
18 x 1.5 15 13.2 17.5 0.6 24-RS-15-BS
18 x 1 / 20 x 2 16 14.2 17.5 0.6 24-RS-16-BS
20 x 1 / 22 x 2 18 16.2 22 0.9 24-RS-18-BS
22 x 1.5 19 17.2 18 0.8 24-RS-19-BS
22 x 1 20 18.2 18 0.8 24-RS-20-BS
25 x 1.5 22 20.2 23.5 1.1 24-RS-22-BS
25 x 1 23 21.2 23.5 1.2 24-RS-23-BS
28 x 2 24 22.2 18 1.4 24-RS-24-BS
28 x 1.5 / 30 x 2.5 25 23.2 18 0.9 24-RS-25-BS
28 x 1 / 30 x 2 26 24.2 18 1.0 24-RS-26-BS
35 x 2 31 28.8 22.5 1.9 24-RS-31-BS
35 x 1.5 / 38 x 3 32 29.8 22.5 1.9 24-RS-32-BS
35 x 1 / 38 x 2.5 33 30.8 22.5 2.1 24-RS-33-BS
42 x 2 38 35.8 23.5 2.4 24-RS-38-BS
42 x 1.5 39 36.8 23.5 2.5 24-RS-39-BS

Example for comp. :
VH04MSX
211
3
Reinforcing sleeves
For thin-walled steel tubes
Material: Steel

d
d4
l
ca.
Order designation
6 x 1 4 2.6 14 0.1 24-RS-4-ST
6 x 0.75 4.5 3.1 14 0.1 24-RS-4,5-ST
8 x 1 6 4.6 14 0.1 24-RS-6-ST
10 x 1 8 6.6 16.5 0.2 24-RS-8-ST
12 x 1 10 8.6 16.5 0.2 24-RS-10-ST
14 x 1 12 10.1 17 0.4 24-RS-12-ST
15 x 1 / 16 x 1.5 13 11.1 17 0.4 24-RS-13-ST
16 x 1 14 12.1 17 0.4 24-RS-14-ST
18 x 1.5 15 13.1 19 0.6 24-RS-15-ST
18 x 1 / 20 x 2 16 14.1 19 0.6 24-RS-16-ST
20 x 1.5 17 15.1 20 0.6 24-RS-17-ST
22 x 2 18 16.1 20 0.6 24-RS-18-ST
22 x 1.5 19 17.1 16 0.6 24-RS-19-ST
22 x 1 20 18.1 20 0.8 24-RS-20-ST
25 x 2 21 19.1 21.5 0.8 24-RS-21-ST
25 x 1.5 22 20.1 23.5 1.0 24-RS-22-ST
28 x 2 24 22.3 23.5 1.1 24-RS-24-ST
28 x 1.5 / 30 x 2.5 25 23.3 23.5 0.9 24-RS-25-ST
28 x 1 / 30 x 2 26 24.3 23.5 1.3 24-RS-26-ST
35 x 2.5 30 27.6 26.5 1.9 24-RS-30-ST
35 x 2 31 28.6 26.5 2.0 24-RS-31-ST
35 x 1.5 / 38 x 3 32 29.6 26.5 1.9 24-RS-32-ST
38 x 2.5 33 30.6 26.5 2.0 24-RS-33-ST
38 x 2 34 31.6 26.5 2.6 24-RS-34-ST
42 x 2.5 37 34.6 21 2.0 24-RS-37-ST
42 x 2 38 35.6 21 2.0 24-RS-38-ST
42 x 1.5 39 36.6 21 2.0 24-RS-39-ST

Example for comp. :
VH04CFX
212
Reinforcing sleeves
For thin-walled stainless steel tubes
Material: Stainless steel

d
d4
l
ca.
Order designation
6 x 1 4 2.5 17 0.1 24-RS-4-SST
8 x 1 6 4.5 14 0.1 24-RS-6-SST
10 x 1 8 6.5 15.5 0.2 24-RS-8-SST
12 x 1 10 8.5 15.5 0.2 24-RS-10-SST
14 x 1 12 10.5 17 0.4 24-RS-12-SST
15 x 1 / 16 x 1.5 13 11.5 17 0.4 24-RS-13-SST
16 x 1 14 12 17 0.4 24-RS-14-SST
18 x 1.5 15 13 18 0.6 24-RS-15-SST
18 x 1 / 20 x 2 16 14 18 0.6 24-RS-16-SST
20 x 1.5 17 15 20 0.6 24-RS-17-SST
22 x 2 18 16 20 0.6 24-RS-18-SST
22 x 1.5 19 17 20 0.6 24-RS-19-SST
22 x 1 20 18 20 0.8 24-RS-20-SST
25 x 2 21 19 21.5 0.8 24-RS-21-SST
25 x 1.5 22 20 24 1.0 24-RS-22-SST
28 x 2 24 22 23.5 1.1 24-RS-24-SST
28 x 1.5 / 30 x 2.5 25 23 23.5 1.0 24-RS-25-SST
28 x 1 / 30 x 2 26 24 23.5 1.3 24-RS-26-SST
35 x 2.5 30 27.8 26.5 1.9 24-RS-30-SST
35 x 2 31 28 26.5 2.0 24-RS-31-SST
35 x 1.5 / 38 x 3 32 29.5 26.5 1.9 24-RS-32-SST
38 x 2.5 33 30 26.5 2.0 24-RS-33-SST
42 x 2 38 35 26.5 2.0 24-RS-38-SST

Example for comp. :
VH0471X
213
3
Sealing rings

215
3
Sealing rings for ES-4 cutting rings
O-Ring for inner sector
Moulded seal for the outer cone
Standard material for moulded seals
and O-rings is FPM/FKM

d
s
O
P
Series
Tube OD
d s Order designation
O
Order designation
P
L 6 6 1 GP-ES4OR-6x1-FKM80 GP-ES4MS-6-FKM80

S 6 6 1 GP-ES4OR-6x1-FKM80 GP-ES4MS-6-FKM80

216
Sealing rings
(seal-edge rings for banjo and
gauge couplings)
Sealing-edge ring for banjo couplings
for external thread (DS)
Sealing-edge ring for gauge couplings
for internal thread (DM)

d6
d5
DS
h
d6
d5
DM
h
d2 d5 d6 h Form kg/100
ca.
Order designation
M 8 x 1 8.1 12 2.5 DS 0.1 GP-SR-M8B-H2,5
M 10 x 1 10.1 14 2.5 DS 0.1 GP-SR-M10B-H2,5
M 12 x 1.5 12.1 17 3 DS 0.2 GP-SR-M12B-H3
M 14 x 1.5 14.1 19 3 DS 0.2 GP-SR-M14B-H3
M 16 x 1.5 16.1 21 3 DS 0.3 GP-SR-M16B-H3
M 18 x 1.5 18.1 23 3 DS 0.3 GP-SR-M18B-H3
M 20 x 1.5 20.1 25 3 DS 0.3 GP-SR-M20B-H3
M 22 x 1.5 22.1 27 4.5 DS 0.6 GP-SR-M22B-H4,5
M 26 x 1.5 26.15 31 3.5 DS 0.5 GP-SR-M26B-H3,5
M 27 x 2 27.15 32 3.5 DS 0.5 GP-SR-M27B-H3,5
M 33 x 2 33.15 39 3.5 DS 0.7 GP-SR-M33B-H3,5
M 42 x 2 42.15 49 3.5 DS 1.0 GP-SR-M42B-H3,5
M 48 x 2 48.15 55 3.5 DS 1.2 GP-SR-M48B-H3,5

G 1/8 A 9.8 14 2.5 DS 0.1 GP-SR-G1/8B-H3,5
G 1/4 A 5.8 11.2 4.6 DM 0.2 GP-SR-IG1/4B-H4,6
G 1/4 A 13.3 18 3 DS 0.2 GP-SR-G1/4B-H3
G 3/8 A 16.8 22 3 DS 0.3 GP-SR-G3/8B-H3
G 1/2 A 11 18.3 5.2 DM 0.6 GP-SR-IG1/2B-H5,2
G 1/2 A 21.1 26 4.5 DS 0.5 GP-SR-G1/2B-H4,5
G 3/4 A 26.6 32 3.5 DS 0.6 GP-SR-G3/4B-H3,5
G 1 A 33.4 39 3.5 DS 0.7 GP-SR-G1B-H3,5
G 1 1/4 A 42.1 49 3.5 DS 1.0 GP-SR-G11/4B-H3,5
G 1 1/2 A 48 55 3.5 DS 1.2 GP-SR-G11/2B-H3,5

Example for comp. :
DKA10X
217
3
Sealing rings for
banjo couplings
Soft seal ring for eccentric banjo couplings
for external thread
Standard soft seal ring material is NBR

d5
d7
h
h
1
d2 d5 d7 h h1 kg/100
ca.
Order designation
M 10 x 1 10.3 14.9 2.5 1.1 0.2 GP-SR-M10-G1/8E
M 12 x 1.5 12.3 17 3 1.6 0.2 GP-SR-M12E
M 14 x 1.5 14.3 18.9 3 1.6 0.2 GP-SR-M14-G1/4E
M 16 x 1.5 17 21.9 3 2.1 0.3 GP-SR-M16-G3/8E
M 18 x 1.5 18.3 23.9 3 0.4 GP-SR-M18E
M 22 x 1.5 22.3 26.9 4.5 2.6 0.7 GP-SR-M22-G1/2E
M 26 x 1.5 26.3 31.9 3.5 2.6 0.6 GP-SR-M26E
M 27 x 2 27.3 32.9 3.5 2.6 0.7 GP-SR-M27-G3/4E
M 33 x 2 33.6 39.9 3.5 2.6 0.9 GP-SR-M33-G1E
M 42 x 2 42.4 49.9 3.5 1.2 GP-SR-M42-G11/4E
M 48 x 2 48.4 55.9 3.5 2.6 1.6 GP-SR-M48-G11/2E

G 1/8 A 10.3 14.9 2.5 1.1 0.2 GP-SR-M10-G1/8E
G 1/4 A 14.3 18.9 3 1.6 0.2 GP-SR-M14-G1/4E
G 3/8 A 17 21.9 3 2.1 0.3 GP-SR-M16-G3/8E
G 1/2 A 22.3 26.9 4.5 2.6 0.7 GP-SR-M22-G1/2E
G 3/4 A 27.3 32.9 3.5 2.6 0.7 GP-SR-M27-G3/4E
G 1 A 33.6 39.9 3.5 2.6 0.9 GP-SR-M33-G1E
G 1 1/4 A 42.4 49.9 3.5 1.2 GP-SR-M42-G11/4E
G 1 1/2 A 48.4 55.9 3.5 2.6 1.6 GP-SR-M48-G11/2E

Example for comp. :
KDS10X
218
Sealing rings for
banjo couplings
O-ring for hollow screws on eccentric
banjo couplings
standard O-ring material is NBR

d
s
d2 O-ring
d x s
Order designation
M 10 x 1 8 x 1.5 GP-OR-8x1,5-NBR90
M 12 x 1.5 10.5 x 1.5 GP-OR-10,5x1,5-NBR90
M 14 x 1.5 12.5 x 1.5 GP-OR-12,5x1,5-NBR90
M 16 x 1.5 14 x 1.5 GP-OR-14x1,5-NBR90
M 18 x 1.5 16 x 1.5 GP-OR-16x1,5-NBR90
M 22 x 1.5 20 x 1.5 GP-OR-20x1,5-NBR90
M 26 x 1.5 23 x 2 GP-OR-23x2-NBR90
M 27 x 2 24 x 2 GP-OR-24x2-NBR90
M 33 x 2 29 x 2.5 GP-OR-29x2,5-NBR90
M 42 x 2 38 x 2.5 GP-OR-38x2,5-NBR90
M 48 x 2 43 x 3 GP-OR-43x3-NBR90

G 1/8 A 8 x 1.5 GP-OR-8x1,5-NBR90
G 1/4 A 12.5 x 1.5 GP-OR-12,5x1,5-NBR90
G 3/8 A 15 x 1.5 GP-OR-15x1,5-NBR90
G 1/2 A 19 x 1.5 GP-OR-19x1,5-NBR90
G 3/4 A 24 x 2 GP-OR-24x2-NBR90
G 1 A 29 x 2.5 GP-OR-29x2,5-NBR90
G 1 1/4 A 38 x 2.5 GP-OR-38x2,5-NBR90
G 1 1/2 A 43 x 3 GP-OR-43x3-NBR90

219
3
Sealing rings for threaded studs
ISO 1179-2
ISO 9974-2
Profile seal rings material is NBR

d5
Thread d2 PEFLEX
d5
Order designation
M 10 x 1 8.4 GP-PEFLEX-M10-G1/8-NBR85
M 12 x 1.5 9.8 GP-PEFLEX-M12-NBR85
M 14 x 1.5 11.6 GP-PEFLEX-M14-G1/4-NBR85
M 26 x 1.5 23.9 GP-PEFLEX-M26-M27-G3/4-NBR85
M 27 x 2 23.9 GP-PEFLEX-M26-M27-G3/4-NBR85
M 33 x 2 29.7 GP-PEFLEX-M33-G1-NBR85

G 1/8 A 8.4 GP-PEFLEX-M10-G1/8-NBR85
G 1/4 A 11.6 GP-PEFLEX-M14-G1/4-NBR85
G 3/8 A 14.7 GP-PEFLEX-G3/8-NBR85
G 1/2 A 18.5 GP-PEFLEX-G1/2-NBR85
G 3/4 A 23.9 GP-PEFLEX-M26-M27-G3/4-NBR85
G 1 A 29.7 GP-PEFLEX-M33-G1-NBR85
G 1 1/4 A 38.8 GP-PEFLEX-M42-G11/4-NBR85
G 1 1/2 A 44.7 GP-PEFLEX-M48-G11/2-NBR85
G 2 A 56.7 GP-PEFLEX-M60-G2-NBR80

Example for comp. :
ED10X1X
220
ISO 1179-2
ISO 9974-2
Profile seal rings material is FPM/FKM

d5
Thread d2 PEFLEX
d5
Order designation
M 10 x 1 8.4 GP-PEFLEX-M10-G1/8-FKM80
M 12 x 1.5 9.8 GP-PEFLEX-M12-FKM80
M 14 x 1.5 11.6 GP-PEFLEX-M14-G1/4-FKM80
M 26 x 1.5 23.9 GP-PEFLEX-M26-M27-G3/4-FKM80
M 27 x 2 23.9 GP-PEFLEX-M26-M27-G3/4-FKM80
M 33 x 2 29.7 GP-PEFLEX-M33-G1-FKM80

G 1/8 A 8.4 GP-PEFLEX-M10-G1/8-FKM80
G 1/4 A 11.6 GP-PEFLEX-M14-G1/4-FKM80
G 3/8 A 14.7 GP-PEFLEX-G3/8-FKM80
G 1/2 A 18.5 GP-PEFLEX-G1/2-FKM80
G 3/4 A 23.9 GP-PEFLEX-M26-M27-G3/4-FKM80
G 1 A 29.7 GP-PEFLEX-M33-G1-FKM80
G 1 1/4 A 38.8 GP-PEFLEX-M42-G11/4-FKM80
G 1 1/2 A 44.7 GP-PEFLEX-M48-G11/2-FKM80
G 2 A 56.7 GP-PEFLEX-M60-G2-FKM80

Example for comp. :
ED10X1X
221
3
ISO 1179-2
ISO 9974-2
Profile seal rings material is EPDM

d5
Thread d2 PEFLEX
d5
Order designation
M 10 x 1 8.4 GP-PEFLEX-M10-G1/8-EPDM85
M 12 x 1.5 9.8 GP-PEFLEX-M12-EPDM85
M 14 x 1.5 11.6 GP-PEFLEX-M14-G1/4-EPDM85
M 26 x 1.5 23.9 GP-PEFLEX-M26-M27-G3/4-EPDM85
M 27 x 2 23.9 GP-PEFLEX-M26-M27-G3/4-EPDM85
M 33 x 2 29.7 GP-PEFLEX-M33-G1-EPDM85

G 1/8 A 8.4 GP-PEFLEX-M10-G1/8-EPDM85
G 1/4 A 11.6 GP-PEFLEX-M14-G1/4-EPDM85
G 3/8 A 14.7 GP-PEFLEX-G3/8-EPDM85
G 1/2 A 18.5 GP-PEFLEX-G1/2-EPDM85
G 3/4 A 23.9 GP-PEFLEX-M26-M27-G3/4-EPDM85
G 1 A 29.7 GP-PEFLEX-M33-G1-EPDM85
G 1 1/4 A 38.8 GP-PEFLEX-M42-G11/4-EPDM85
G 1 1/2 A 44.7 GP-PEFLEX-M48-G11/2-EPDM85

Example for comp. :
ED10X1X
222
ISO 6149-2 / -3
ISO 11926-2 / -3
O-ring material is NBR

d
s
Thread d2 O-ring
d x s
Order designation
M 10 x 1 8.1 x 1.6 GP-OR-8,1x1,6-NBR90
M 12 x 1.5 9.3 x 2.2 GP-OR-9,3x2,2-NBR90
M 14 x 1.5 11.3 x 2.2 GP-OR-11,3x2,2-NBR90
M 16 x 1.5 13.3 x 2.2 GP-OR-13,3x2,2-NBR90
M 18 x 1.5 15.3 x 2.2 GP-OR-15,3x2,2-NBR90
M 22 x 1.5 19.3 x 2.2 GP-OR-19,3x2,2-NBR90
M 27 x 2 23.6 x 2.9 GP-OR-23,6x2,9-NBR90
M 33 x 2 29.6 x 2.9 GP-OR-29,6x2,9-NBR90
M 42 x 2 38.6 x 2.9 GP-OR-38,6x2,9-NBR90
M 48 x 2 44.6 x 2.9 GP-OR-44,6x2,9-NBR90

7/16-20 UNF-2A 8.92 x 1.83 GP-OR-8,92x1,83-NBR90
1/2-20 UNF-2A 10.52 x 1.83 GP-OR10,52x1,83-NBR90
9/16-18 UNF-2A 11.89 x 1.98 GP-OR-11,89x1,98-NBR90
3/4-16 UNF-2A 16.36 x 2.21 GP-OR-16,36x2,21-NBR90
7/8-14 UNF-2A 19.18 x 2.46 GP-OR-19,18x2,46-NBR90
1 1/16-12 UN-2A 23.47 x 2.95 GP-OR-23,47x2,95-NBR90
1 3/16-12 UN-2A 26.62 x 2.95 GP-OR26,62x2,95-NBR90
1 5/16-12 UN-2A 29.74 x 2.95 GP-OR-29,74x2,95-NBR90
1 5/8-12 UN-2A 37.47 x 3 GP-OR-37,47x3-NBR90
1 7/8-12 UN-2A 43.69 x 3 GP-OR43,69x3-NBR90

223
3
ISO 6149-2 / -3
ISO 11926-2 / -3
O-ring material is FPM/FKM

d
s
Thread d2 O-ring
d x s
Order designation
M 10 x 1 8.1 x 1.6 GP-OR-8,1x1,6-FKM80
M 12 x 1.5 9.3 x 2.2 GP-OR-9,3x2,2-FKM80
M 14 x 1.5 11.3 x 2.2 GP-OR-11,3x2,2-FKM80
M 16 x 1.5 13.3 x 2.2 GP-OR-13,3x2,2-FKM80
M 18 x 1.5 15.3 x 2.2 GP-OR-15,3x2,2-FKM80
M 22 x 1.5 19.3 x 2.2 GP-OR-19,3x2,2-FKM80
M 33 x 2 29.6 x 2.9 GP-OR-29,6x2,9-FKM80
M 42 x 2 38.6 x 2.9 GP-OR-38,6x2,9-FKM80
M 48 x 2 44.6 x 2.9 GP-OR-44,6x2,9-FKM80

7/16-20 UNF-2A 8.92 x 1.83 GP-OR-8,92x1,83-FKM80
1/2-20 UNF-2A 10.52 x 1.83 GP-OR10,52x1,83-FKM80
9/16-18 UNF-2A 11.89 x 1.98 GP-OR-11,89x1,98-FKM70
3/4-16 UNF-2A 16.36 x 2.21 GP-OR-16,36x2,21-FKM80
7/8-14 UNF-2A 19.18 x 2.46 GP-OR-19,18x2,46-FKM90
1 1/16-12 UN-2A 23.47 x 2.95 GP-OR-23,47x2,95-FKM80
1 3/16-12 UN-2A 26.62 x 2.95 GP-OR26,62x2,95-FKM80
1 5/16-12 UN-2A 29.74 x 2.95 GP-OR-29,74x2,95-FKM80
1 5/8-12 UN-2A 37.47 x 3 GP-OR-37,47x3-FKM80
1 7/8-12 UN-2A 43.69 x 3 GP-OR43,69x3-FKM80

224
Sealing rings for taper couplings (DKO)
and flared cones
O-ring material is NBR

d
s
Series
Tube OD
d x s Order designation
L 6 4 x 1.5 GP-OR-4x1,5-NBR80
L 8 6 x 1.5 GP-OR-6x1,5-NBR80
L 10 7.5 x 1.5 GP-OR-7,5x1,5-NBR80
L 12 9 x 1.5 GP-OR-9x1,5-NBR80
L 15 12 x 2 GP-OR-12x2-NBR80
L 18 15 x 2 GP-OR-15x2-NBR80
L 22 20 x 2 GP-OR-20x2-NBR80
L 28 26 x 2 GP-OR-26x2-NBR80
L 35 32 x 2.5 GP-OR-32x2,5-NBR80
L 42 38 x 2.5 GP-OR-38x2,5-NBR80

S 6 4 x 1.5 GP-OR-4x1,5-NBR80
S 8 6 x 1.5 GP-OR-6x1,5-NBR80
S 10 7.5 x 1.5 GP-OR-7,5x1,5-NBR80
S 12 9 x 1.5 GP-OR-9x1,5-NBR80
S 14 10 x 2 GP-OR-10x2-NBR80
S 16 12 x 2 GP-OR-12x2-NBR80
S 20 16.3 x 2.4 GP-OR-16,3x2,4-NBR80
S 25 20.3 x 2.4 GP-OR-20,3x2,4-NBR80
S 30 25.3 x 2.4 GP-OR-25,3x2,4-NBR80
S 38 33.3 x 2.4 GP-OR-33,3x2,4-NBR80

225
3
Sealing rings for taper couplings (DKO)
and flared cones
O-ring material is EPDM

d
s
Series
Tube OD
L 6 4 x 1.5 GP-OR-4x1,5-EPDM80
L 8 6 x 1.5 GP-OR-6x1,5-EPDM80
L 10 7.5 x 1.5 GP-OR-7,5x1,5-EPDM80
L 12 9 x 1.5 GP-OR-9x1,5-EPDM80
L 15 12 x 2 GP-OR-12x2-EPDM80
L 18 15 x 2 GP-OR-15x2-EPDM80
L 22 20 x 2 GP-OR-20x2-EPDM80
L 28 26 x 2 GP-OR-26x2-EPDM80
L 35 32 x 2.5 GP-OR-32x2,5-EPDM80
L 42 38 x 2.5 GP-OR-38x2,5-EPDM80

S 6 4 x 1.5 GP-OR-4x1,5-EPDM80
S 8 6 x 1.5 GP-OR-6x1,5-EPDM80
S 10 7.5 x 1.5 GP-OR-7,5x1,5-EPDM80
S 12 9 x 1.5 GP-OR-9x1,5-EPDM80
S 14 10 x 2 GP-OR-10x2-EPDM80
S 16 12 x 2 GP-OR-12x2-EPDM80
S 20 16.3 x 2.4 GP-OR-16,3x2,4-EPDM80
S 25 20.3 x 2.4 GP-OR-20,3x2,4-EPDM80
S 30 25.3 x 2.4 GP-OR-25,3x2,4-EPDM80
S 38 33.3 x 2.4 GP-OR-33,3x2,4-EPDM80

226
Sealing rings for flange couplings

d
s
Series
Tube OD
Hole circle diameter Fl.
size
L 10 35 20 x 2.5 GP-OR-20x2,5-NBR90
L 12 35 20 x 2.5 GP-OR-20x2,5-NBR90
L 15 35 20 x 2.5 GP-OR-20x2,5-NBR90
L 15 40 26 x 2.5 GP-OR-26x2,5-NBR90
L 18 40 26 x 2.5 GP-OR-26x2,5-NBR90
L 18 3/4 24.99 x 3.53 GP-OR-24,99x3,53-NBR90
L 22 40 26 x 2.5 GP-OR-26x2,5-NBR90
L 22 3/4 24.99 x 3.53 GP-OR-24,99x3,53-NBR90
L 28 1 32.92 x 3.53 GP-OR-32,92x3,53-NBR90
L 28 40 26 x 2.5 GP-OR-26x2,5-NBR90
L 28 55 32 x 2.5 GP-OR-32x2,5-NBR90
L 35 1 1/4 37.69 x 3.53 GP-OR-37,69x3,53-NBR90
L 35 55 32 x 2.5 GP-OR-32x2,5-NBR90
L 42 1 1/2 47.22 x 3.53 GP-OR-47,22x3,53-NBR90

S 12 35 20 x 2.5 GP-OR-20x2,5-NBR90
S 16 35 20 x 2.5 GP-OR-20x2,5-NBR90
S 16 1/2 18.64 x 3.53 GP-OR-18,64x3,53-NBR90
S 16 3/4 24.99 x 3.53 GP-OR-24,99x3,53-NBR90
S 20 3/4 24.99 x 3.53 GP-OR-24,99x3,53-NBR90
S 20 35 20 x 2.5 GP-OR-20x2,5-NBR90
S 20 40 26 x 2.5 GP-OR-26x2,5-NBR90
S 20 55 32 x 2.5 GP-OR-32x2,5-NBR90
S 25 1 1/4 37.69 x 3.53 GP-OR-37,69x3,53-NBR90
S 25 55 32 x 2.5 GP-OR-32x2,5-NBR90
S 25 3/4 24.99 x 3.53 GP-OR-24,99x3,53-NBR90
S 30 55 32 x 2.5 GP-OR-32x2,5-NBR90
S 30 1 32.92 x 3.53 GP-OR-32,92x3,53-NBR90
S 30 1 1/4 37.69 x 3.53 GP-OR-37,69x3,53-NBR90
S 38 1 1/2 47.22 x 3.53 GP-OR-47,22x3,53-NBR90
S 38 1 1/4 37.69 x 3.53 GP-OR-37,69x3,53-NBR90

227
3
Sealing rings for VOSSForm
SQR
tube couplings
Standard moulded seal material is FPM/FKM

t
s
d1
Series
Tube OD
d1 x s t Order designation
L 6 6 x 1.8 0.7 24-SQRMS-L/S6-FKM90
L 8 8 x 1.8 0.7 24-SQRMS-L/S8-FKM90
L 10 10 x 2 0.7 24-SQRMS-L/S10-FKM90
L 12 12 x 2 0.7 24-SQRMS-L/S12-FKM90
L 15 15 x 2 0.7 24-SQRMS-L15-FKM90
L 18 18 x 2 0.7 24-SQRMS-L18-FKM90
L 22 22 x 2 0.7 24-SQRMS-L22-FKM90
L 28 28 x 2 0.7 24-SQRMS-L28-FKM90
L 35 35 x 2.6 0.9 24-SQRMS-L35-FKM90
L 42 42 x 2.6 0.9 24-SQRMS-L42-FKM90

S 6 6 x 1.8 0.7 24-SQRMS-L/S6-FKM90
S 8 8 x 1.8 0.7 24-SQRMS-L/S8-FKM90
S 10 10 x 2 0.7 24-SQRMS-L/S10-FKM90
S 12 12 x 2 0.7 24-SQRMS-L/S12-FKM90
S 14 14 x 2 0.7 24-SQRMS-S14-FKM90
S 16 16 x 2 0.7 24-SQRMS-S16-FKM90
S 20 20 x 2.5 0.9 24-SQRMS-S20-FKM90
S 25 25 x 2.5 0.9 24-SQRMS-S25-FKM90
S 30 30 x 2.6 0.9 24-SQRMS-S30-FKM90
S 38 38 x 2.6 0.9 24-SQRMS-S38-FKM90

228
Sealing rings for 24/37
flare adapters
O-ring (O) for the 24 taper
O-ring (P) for the 37 taper

d
O/P
s
Series
Tube OD
O
P
L 6 4 x 1.5 GP-OR-4x1,5-FKM80 4.4 x 0.8 GP-OR-4,4x0,8-FKM80
L 8 6 x 1.5 GP-OR-6x1,5-FKM80 6 x 0.8 GP-OR-6x0,8-FKM80
L 10 7.5 x 1.5 GP-OR-7,5x1,5-FKM80 7.5 x 0.8 GP-OR-7,5x0,8-FKM80
L 12 9 x 1.5 GP-OR-9x1,5-FKM80 9.5 x 0.8 GP-OR-9,5x0,8-FKM80
L 15 12 x 2 GP-OR-12x2-FKM80 12.5 x 0.8 GP-OR-12,5x0,8-FKM80
L 18 15 x 2 GP-OR-15x2-FKM80 15 x 1 GP-OR-15x1-FKM80
L 35 32 x 2.5 GP-OR-32x2,5-FKM80 30 x 1 GP-OR-30x1-FKM80
L 42 38 x 2.5 GP-OR-38x2,5-FKM80 37 x 1 GP-OR-37x1-FKM80

S 6 4 x 1.5 GP-OR-4x1,5-FKM80 4.4 x 0.8 GP-OR-4,4x0,8-FKM80
S 8 6 x 1.5 GP-OR-6x1,5-FKM80 6 x 0.8 GP-OR-6x0,8-FKM80
S 10 7.5 x 1.5 GP-OR-7,5x1,5-FKM80 7.5 x 0.8 GP-OR-7,5x0,8-FKM80
S 12 9 x 1.5 GP-OR-9x1,5-FKM80 9.5 x 0.8 GP-OR-9,5x0,8-FKM80
S 14 10 x 2 GP-OR-10x2-FKM80 11 x 1 GP-OR-11x1-FKM80
S 16 12 x 2 GP-OR-12x2-FKM80 12.5 x 1 GP-OR-12,5x1-FKM80
S 20 16.3 x 2.4 GP-OR-16,3x2,4-FKM80 16 x 1 GP-OR-16x1-FKM80
S 38 33.3 x 2.4 GP-OR-33,3x2,4-FKM80 32 x 1.8 GP-OR-32x1,8-FKM80

229
3
Flange couplings / ZAKO / ZAKO LP
Flange couplings with cutting ring connection
ZAKO ared anges
ZAKO LP ared anges

231
4
Voss products
P.234
Product information, flange
couplings
P.240
Product information, ZAKO flange
couplings
P.241
Flange couplings with cutting ring
and square flange connection
FSO FEO
P.246 P.247
connection and devided SAE
flange
FSO FEO
P.250 P.252
and square flange connection,
Individual parts
FS FE
P.256 P.257
connection and split SAE flange,
individual parts
FCS, FSX, FEX
P.260
Content Type/Page

232
ZAKO flared flanges with SAE
flange connection
TPO
(standard)
TPO
(high pressure)
TTO
(standard)
TTO
(high pressure)
P.264 P.266 P.268 P.269
ZAKO flared flanges with square
flange connection
TPO TTO
P.272 P.274
ZAKO, individual parts RGO R FPH FPT FPH
P.278 P.280 P.282 P.283 P.284
ZAKO LP flared flange with SAE
flange connection
TPO TTO TTEO
P.286 P.287 P.289
ZAKO LP flared flange, individual
parts
RGO R FPH
P.291 P.292 P.293
Content Type/Page

233
4
ZAKO connecting ange coupling set, square ange for 30x4 mm tube, hole circle 62 mm, screw size M12, blackened, oiled or burnished steel
- - O TP Z
ZAKO ange program
The system characteristic describes the product line.
System
ZAKO Flange tube-to-port, set
The Function/component describes the product type.
Function/Component
Form
This characteristic identies the components (e. g. hexagonal nut, union nut
connection systems are listed in the Sufx characteristics.
O-ring enclosed
Completion
Series/Thread
Example: Z-TPO-30x4-HC62-M12-C19
identication of the products. Since the structure is based
System
Function/
Component
Form Completion
Series/
Thread

234
- 30x4 - - - HC62 M12 C19
Deviations from the default characteristics (e. g. seal materials, completion using
different cutting ring systems, ared coupling parts, special dimensions )
Screw size M12 mm
Sufx 2
Hole circle 62 mm
Sufx 1
using different cutting ring systems, ared coupling parts, special
dimensions )
Not relevant for chapter 4.
Diameter
Thread
States the outer diameter or the nominal diameter of the tube.
Where required, the tube wall thickness is also stated.
Tube OD/Diameter
Steel, blanckened, oiled or burnished
Sufx 5
Tube OD/
Diameter
Thread Diameter
Sealing type/
Threaded bore
Sufx
different cutting ring systems, ared coupling parts, special dimensions )
Tube size 30x4 mm

235
4
System
24 24 DIN program
Z ZAKO ange program
Function
Flanges
F Flanges
FCS Split ange clamps
ZAKO Flanges
FPH ZAKO Flange plates with hole
FPT ZAKO Flange plates with thread
PT ZAKO Flanges port-to-tube, set
TP ZAKO Flanges tube-to-port, set
TT ZAKO Flanges tube-to-tube, set
RG ZAKO Rings with groove
R ZAKO Rings without groove
Form
E Elbow
S Straight
T Tee
Completion
O O-ring enclosed
X Tube socket not pre-assembled / only body
Series/Thread
Series
L Light series
S Heavy series
Others
LP ZAKO low pressure
System
Function/
Component
Form Completion
Series/
Thread
Tube OD/
Diameter
Thread Diameter
Sealing type/
Threaded bore
Sufx

236
Tube OD/Diameter
10 10 mm
12 12 mm
15 15 mm
16 16 mm
18 18 mm
20 20 mm
22 22 mm
25 25 mm
28 28 mm
30 30 mm
35 35 mm
38 38 mm
42 42 mm
43.3 43.3 mm
48.3 48.3 mm
50 50 mm
60.3 60.3 mm
65 65 mm
76.1 76.1 mm
80 80 mm
88.9 88.9 mm
101.6 101.6 mm
114.3 114.3 mm
Suffix overview
Sufx 1 Flange hole pattern
Sufx 2 Flange screw diameter
Sufx 5 Completion
Sufx 6 Differing dimension
Sufx 7 Material / Strength
Sufx 8 Coating
Sufx 1 Flange hole pattern
SAE pattern
3S1/2 3000 psi SAE 1/2 "
3S3/4 3000 psi SAE 3/4 "
3S1 3000 psi SAE 1 "
3S11/4 3000 psi SAE 1 1/4 "
3S11/2 3000 psi SAE 1 1/2 "
3S2 3000 psi SAE 2 "
3S21/2 3000 psi SAE 2 1/2 "
3S3 3000 psi SAE 3 "
3S31/2 3000 psi SAE 3 1/2 "
System
Function/
Component
Form Completion
Series/
Thread
Tube OD/
Diameter
Thread Diameter
Sealing type/
Threaded bore
Sufx

237
4
3S4 3000 psi SAE 4 "
6S1/2 6000 psi SAE 1/2 "
6S3/4 6000 psi SAE 3/4 "
6S1 6000 psi SAE 1 "
6S11/4 6000 psi SAE 1 1/4 "
6S11/2 6000 psi SAE 1 1/2 "
6S2 6000 psi SAE 2 "
Hole circle
HC35 Hole circle 35 mm
Sufx 2 Flange screw diameter
Flange screw hole diameter
D10,75 Diameter 10.75 mm

Flange screw size
M10 Metric 10 mm
IM16 Internal thread, metric 16 mm

Sufx 5 Completion
1S 1S Cutting ring
BV10 BV-10 Set
24/37 24/37 Set
Sufx 6 Differing dimension
Dimension
HD75 Hub diameter 75 mm

Sufx 7 Material /Strength
Screw strength
8.8 8.8
10.9 10.9
System
Function/
Component
Form Completion
Series/
Thread
Tube OD/
Diameter
Thread Diameter
Sealing type/
Threaded bore
Sufx

238
Sufx 8 Coating
C19 Steel, blackened, oiled or burnished
C24 Steel zinc plated, blue chromated
System
Function/
Component
Form Completion
Series/
Thread
Tube OD/
Diameter
Thread Diameter
Sealing type/
Threaded bore
Sufx

239
4
In addition to screwed tube couplings for the various
in stallation criteria, anges are also frequently used in
hydraulic systems, preferably for medium-range and large
coupling dimensions. Various ange versions are provided
in order to meet different requirements.
Flange couplings with square anges and cutting ring
connection
Product information, ange couplings
These ange couplings with a square ange connection
are characterized by very compact external dimensions.
Both straight and elbow versions are available. The product
range covers tube outer diameters ranging from 10 mm to
35 mm. The ange connections are sealed with a circular
elastic sealing ring (O-ring), and the physical connection is
made using cheese-head screws. The ange connections
are designed to match the connection hole patterns of
leading pump manufacturers.
SAE ange couplings with cutting ring connection
SAE ange couplings are supplied both as standard and
as high-pressure designs with hole patterns in accordance
with SAE J 518 or ISO 6162.
The device-side connection is made with 2 ange halves
secured with 4 cheese head screws. In contrast to normal
threaded studs, the screws can be fastened in the
couplings using smaller tools and lower forces. The tube
connections can be made using cutting rings or BV-10
ared couplings, for instance.
One special advantage of the SAE ange elbow couplings
is that the connection direction is adjustable. Nevertheless,
accessibility of the mounting screws must be ensured when
installing the tubes.
The VOSS ZAKO system with the 10 are connection is
provided for especially high stresses, such as are caused
by vibration and pressure jolts or high pressures in tubes
with larger diameters.
General note
In order for the ange couplings listed in this catalogue to
full their function, the installation instructions and the note
in the technical remarks must be followed exactly.

240
In hydraulic engineering, the ZAKO range of anges is
a synonym for reliability on a large scale, as this unique
design not only stands up to the hardest stresses without
any problems, it is also conceived for use with large-
diameter tubes. With the 10 are system and the exclusive
VOSS coat nish providing optimum corrosion protection,
ZAKO anges set the absolute standard in all elds of
hydraulics, proving their worth e. g. in strip-mining equip-
ment, hydraulic presses and injection-moulding machinery.
ZAKO creates condence right from the start
For tubes with outer diameters ranging from 16 mm to
114.3mm and wall thicknesses up to 17.5 mm.
Standard series for up to 250 bar and high-pressure
series for up to 400 bar, with four-fold safety.
For standard hole patterns in accordance with SAE
(3000 psi/6000 psi) and square anges.
Maximum possible corrosion resistance thanks to VOSS
coat nish, also available with phosphate surface nish
as an option.
Superior 10 are system
Also available: ZAKO LP the low-pressure version for
up to 60 bar and applications in the low-pressure range
(e.g. for uid return lines and lubrication lines)
Product information, ZAKO ange couplings
This removable ange system eliminates complicated
welding work
Compared to conventional welded joints, the ZAKO
system is also convincing from the economical and techni-
cal aspects.
Removable connections are ideal for servicing and
maintenance
Permissible operating pressures with four-fold safety
Fast assembly, saving time and money
Lower component process costs
Can be installed in high re hazard environments
No complex process steps (tack-welds, setting up, seal-
welding, cleaning, ame-tempering and straightening)
The perfect design for efcient installation
ZAKO system tube couplings consist of four perfectly
match ing elements: a ZAKO ring, an O-ring, a ange, and
the connecting screws or bolts. The tried and tested 10
are principle in conjunction with the ZAKO ring ensures a
notch-effect-free and incision-free preliminary assembly. To
achieve this, the ZAKO ring is pressed accurately into the
tube at a very high pressure applied by special pre-assem-
bly equipment. This, in conjunction with an additional lab-
yrinth seal, ensures that the system is strong and leak-tight.

241
4
10
advantages of the system in terms of stability and safe-
ty. As the tube is only ared by 10, the material is not
ex panded too far and thus retains sufcient elasticity to
withstand strong alternating bending stresses.
As opposed to systems with conventional are angles of
37, ZAKO ange systems have a 10 taper angle and
small "saw teeth" on the ared section. Many years of
experience using this system combined with extensive
force measurement tests have shown the considerable
tube
10 ared section
ZAKO ring
O-ring seal
screws
ZAKO ange
(SAE or square ange)

242
10 means
greater function reserves
The low expansion of the tube end achieves unimpaired
material strength.
higher compression force
The compression force achieved using the equivalent
bolt tension is approximately 3.5 times greater than with
comparable 37 systems.
optimized assembly without tool wear
The ZAKO ring is a tool and component in one and is
press-tted into the tube during the pre-assembly
process.
easy utilization
No special assembly limit couplings (stops) required.
better support
A long ared section supports the coupling system better
and greatly increases its stability under dynamic loads.
better sealing
The saw-tooth surface of the ared section achieves an
additional labyrinth-seal effect.
ZAKO ange systems are available for tubes with outer dia-
meters of 16 114.3 mm and various wall thicknesses. All
sizes are available as standard, high-pressure versions (for
up to 400 bar) and low-pressure versions (for up to 60 bar).
Overview of the 10 ange system
ZAKO
tube OD* [mm] wall thickness [mm]
16 2 | 2.5 | 3
20 2.5 | 3 | 3.5
25 3 | 4
30 4 | 5
38 4 | 5 | 6
42 2
50 2.5 | 5 | 6 | 8 | 9
60 3 | 5 | 10
65 3 | 4 | 5 | 8
75 12.5
80 3 | 8 | 10
88 14
101.6 16
114.3 17.5
* outer diameter
ZAKO LP
tube OD* [mm] wall thickness [mm]
48.3 3.2 | 4
60.3 3.6 | 4.5
76.1 3.6 | 5
88.9 3.6 | 5
114.3 3.6 | 6.3
The ZAKO principle
ZAKO ange couplings are easily and safely assembled.
A pre-assembly device is used to press the ZAKO ring
into the tube which is to be connected by the system. In
this process, the ZAKO collar ring serves both as a aring
tool and a component that remains in the ared tube. This
means that possible process faults due to worn tools are
eliminated. After this, the two tubes are joined together
using the anges and connecting bolts or screws. An
O-ring integrated into the ZAKO collar ring is used to seal
the coupling. The 10 are angle of this system provides
a very long contact area that supports the connection,
en suring that the connection's stability is maintained even
under high dynamic loads. Flange connections are easily
taken apart to permit service and maintenance work.

243
4
Depending on where and how you intend to pre-assemble
the ZAKO rings, we offer you a wide range of pre-assembly
devices, ranging from manually operated tools for occasio-
nal use right up to high-performance equipment for mass
production.
Type 90 Comfort
Tube OD 16 38 mm
Type 80 N3
Tube OD 16 38 mm
Type 90 Basic II
Tube OD 16 38 mm
Type 85
Tube OD 38 114.3 mm

244
Flange couplings with cutting ring and square
flange connection

245
4
Straight flange couplings
With cutting ring and square flange connection

M
dx
i
t
5
l
2
d1
Spring washer
O-ring
D
Series
Tube OD
d1
PB Hole
circle
D
dx l2 t5 i
ca.
4 x cyl.
screws
O-ring Nm kg/100
ca.
Order designation
L 10 315 35 8 23 7 12.5 M 6 x 22 20 x 2,5 10 13.4 24-FSO-L10-HC35-M6
L 12 315 35 10 23 7 12.5 M 6 x 22 20 x 2,5 10 12.7 24-FSO-L12-HC35-M6
L 15 100 40 12 27.5 7 12.5 M 6 x 22 26 x 2,5 10 15.8 24-FSO-L15-HC40-M6
L 15 250 35 12 23 7 12.5 M 6 x 22 20 x 2,5 10 13.1 24-FSO-L15-HC35-M6
L 18 100 35 12 22.5 7.5 12.5 M 6 x 22 26 x 2,5 10 14.8 24-FSO-L18-HC35-M6
L 18 100 40 19 27.5 7.5 12.5 M 6 x 22 26 x 2,5 10 16.3 24-FSO-L18-HC40-M6
L 22 100 40 19 27.5 7.5 12.5 M 6 x 22 26 x 2,5 10 15.6 24-FSO-L22-HC40-M6
L 28 100 40 20 27.5 7.5 12.5 M 6 x 22 26 x 2,5 10 19.4 24-FSO-L28-HC40-M6
L 28 100 55 20 32.5 7.5 11.5 M 8 x 25 32 x 2,5 25 38.4 24-FSO-L28-HC55-M8
L 35 100 55 28 39.5 10.5 11.5 M 8 x 25 32 x 2,5 25 40.9 24-FSO-L35-HC55-M8

S 16 315 35 12 21.5 8.5 12.5 M 6 x 22 20 x 2,5 10 12.8 24-FSO-S16-HC35-M6
S 20 315 55 16 29.5 10.5 11.5 M 8 x 25 33 x 2,5 25 37.1 24-FSO-S20-HC55-M8

Nm = recommended tightening
torques (Nm max.) for
cylindrical bolts as spec. in DIN 912
(8.8) for friction coefficient tot. 0.14.
Example for comp. :
BFG10L/LK35
246
Elbow flange couplings

M
dx
l2 t5
l
3
i
Spring washer
O-ring
d
1
d
y
D
Series
Tube OD
d1
PB Hole
circle
D
dx dy l2 l3 t5 i
ca.
4 x cyl.
screws
O-ring Nm kg/100
ca.
Order designation
L 10 315 35 14 8 31 16.5 7 12.5 2 x M 6 x 22
2 x M 6 x 35
20 x 2,5 10 18.6 24-FEO-L10-HC35-M6
L 12 315 35 14 10 31 16.5 7 12.5 2 x M 6 x 22
2 x M 6 x 35
20 x 2,5 10 16.8 24-FEO-L12-HC35-M6
L 15 100 40 20 12 31 22.5 7 12.5 4 x M 6 x 22 26 x 2,5 10 20.4 24-FEO-L15-HC40-M6
L 15 250 35 14 12 31 16.5 7 12.5 2 x M 6 x 22
2 x M 6 x 35
20 x 2,5 10 17.8 24-FEO-L15-HC35-M6
L 18 100 40 20 15 30.5 22.5 7.5 12.5 4 x M 6 x 22 26 x 2,5 10 20.6 24-FEO-L18-HC40-M6
L 18 250 35 15 15 30.5 20 7.5 12.5 2 x M 6 x 22
2 x M 6 x 40
20 x 2,5 10 22.8 24-FEO-L18-HC35-M6
L 22 100 40 20 19 30.5 22.5 7.5 12.5 4 x M 6 x 22 26 x 2,5 10 20.9 24-FEO-L22-HC40-M6
L 28 100 40 20 25 32.5 28 7.5 12.5 2 x M 6 x 22
2 x M 6 x 50
26 x 2,5 10 29.9 24-FEO-L28-HC40-M6
L 35 100 40 20 31 30.5 34 10.5 12.5 2 x M 6 x 22
2 x M 6 x 60
26 x 2,5 10 39.5 24-FEO-L35-HC40-M6
L 35 100 55 26 31 38.5 32 10.5 11.5 2 x M 8 x 25
2 x M 8 x 60
32 x 2,5 25 57.9 24-FEO-L35-HC55-M8
L 42 100 55 26 38 38 40 8.5 11 2 x M 8 x 25
2 x M 8 x 70
32 x 2,5 25 61.0 24-FEO-L42-HC55-M8

S 16 315 35 15 12.5 29.5 20 8.5 12.5 2 x M 6 x 22
2 x M 6 x 40
20 x 2,5 10 22.1 24-FEO-S16-HC35-M6
S 20 250 40 20 16 29.5 22 10.5 12.5 2 x M 6 x 22
2 x M 6 x 45
26 x 2,5 10 25.5 24-FEO-S20-HC40-M6
S 20 250 55 20 16 34.5 24 10.5 11 2 x M 8 x 25
2 x M 8 x 50
32 x 2,5 25 52.9 24-FEO-S20-HC55-M8
S 20 315 35 15 16 34.5 25 10.5 11 2 x M 6 x 22
2 x M 6 x 45
20 x 2,5 10 29.1 24-FEO-S20-HC35-M6
S 25 250 55 20 20 37 30 12 11.5 2 x M 8 x 25
2 x M 8 x 55
32 x 2,5 25 61.3 24-FEO-S25-HC55-M8
S 30 250 55 26 26 35.5 32 13.5 11 2 x M 8 x 25
2 x M 8 x 50
32 x 2,5 25 58.4 24-FEO-S30-HC55-M8

Example for comp. :
BFW10L/LK35
247
4
Flange couplings with cutting ring connection and devi-
ded SAE flange

249
4
With cutting ring connection and split SAE flange
Hole pattern according to SAE J 518 C / ISO 6162
Standard series (3000 psi)

dx
d1
SW1
M
i
l
2
l
g
O-ring
B
S1
A
S
2
Series
Tube OD
d1
Fl.
size
PB dx lg SW1 l2 S1 S2 A B i 4 x cyl.
screws
O-ring Nm Order designation
L 18 3/4 315 15 53 30 45.5 22.2 47.6 65 52 16 M 10 x 30 25 x 3,53 50 24-FSO-L18-3S3/4-M10
L 22 3/4 160 19 53 30 45.5 22.2 47.6 65 52 16 M 10 x 30 25 x 3,53 50 24-FSO-L22-3S3/4-M10
L 28 1 160 24 54 36 46.5 26.2 52.4 70 59 14 M 10 x 30 32,92 x 3,53 50 24-FSO-L28-3S1-M10
L 35 1 1/4 160 30 58 41 47.5 30.2 58.7 79 73 24 M 12 x 35 37,7 x 3,53 85 24-FSO-L35-3S11/4-M12
L 42 1 1/2 160 36 64 46 53 35.7 69.9 94 83 14 M 12 x 35 47,22 x 3,53 85 24-FSO-L42-3S11/2-M12

S 20 3/4 350 16 57 30 46.5 22.2 47.6 65 52 16 M 10 x 30 25 x 3,53 50 24-FSO-S20-3S3/4-M10
S 25 3/4 350 17 57 30 45 22.2 47.6 65 52 16 M 10 x 30 25 x 3,53 50 24-FSO-S25-3S3/4-M10
S 25 1 1/4 280 20 60 41 48 30.2 58.7 79 73 24 M 12 x 35 37,7 x 3,53 85 24-FSO-S25-3S11/4-M12
S 30 1 350 24 63 36 49.5 26.2 52.4 70 59 14 M 10 x 30 32,92 x 3,53 50 24-FSO-S30-3S1-M10
S 30 1 1/4 280 25 62 41 48.5 30.2 58.7 79 73 24 M 12 x 35 37,7 x 3,53 85 24-FSO-S30-3S11/4-M12
S 38 1 1/4 280 28 66 46 50.5 30.2 58.7 79 73 24 M 12 x 35 37,7 x 3,53 85 24-FSO-S38-3S11/4-M12
S 38 1 1/2 210 32 70 46 54 35.7 69.9 94 83 19 M 12 x 35 47,22 x 3,53 85 24-FSO-S38-3S11/2-M12

Example for comp. :
GFS33/18L
250
With cutting ring connection and devided SAE flange
High-pressure series (6000 psi)

dx
d1
SW1
M
i
l
2
l
g
O-ring
B
S1
A
S
2
Series
Tube OD
d1
Fl.
size
PB dx lg SW1 l2 S1 S2 A B i 4 x cyl.
screws
S 16 3/4 400 12 59 30 50.5 23.8 50.8 71 60 16 M 10 x 35 25 x 3,53 50 24-FSO-S16-6S3/4-M10
S 20 3/4 400 16 61 30 50.5 23.8 50.8 71 60 16 M 10 x 35 25 x 3,53 50 24-FSO-S20-6S3/4-M10
S 25 3/4 400 17 63 30 51 23.8 50.8 71 60 16 M 10 x 35 25 x 3,53 50 24-FSO-S25-6S3/4-M10
S 25 1 400 20 72 36 60 27.8 57.2 81 70 21 M 12 x 45 32,92 x 3,53 85 24-FSO-S25-6S1-M12
S 30 1 400 24 74 36 60.5 27.8 57.2 81 70 21 M 12 x 45 32,92 x 3,53 85 24-FSO-S30-6S1-M12
S 30 1 1/4 400 25 79 41 65.5 31.8 66.7 95 78 23 M 14 x 50 37,7 x 3,53 135 24-FSO-S30-6S11/4-M14
S 38 1 1/4 315 30 83 46 67 31.8 66.7 95 78 23 M 14 x 50 37,7 x 3,53 135 24-FSO-S38-6S11/4-M14
S 38 1 1/2 315 30 89 46 73 36.5 79.4 113 95 25 M 16 x 55 47,22 x 3,53 210 24-FSO-S38-6S11/2-M16

Example for comp. :
GFS63/16S
251
4

l2
dx
lg2
M
SW2
d
y
l
3
i
d
1
O-ring
B
S1
A
S
2
Series
Tube OD
d1
Fl.
size
PB dx dy lg2 SW2 l2 l3 S1 S2 A B i 4 x cyl.
screws
L 18 3/4 315 19 15 39 30 31.5 42 22.2 47.6 65 52 16 M 10 x 30 25 x 3,53 50 24-FEO-L18-3S3/4-M10
L 22 3/4 160 19 19 41 30 33.5 42 22.2 47.6 65 52 16 M 10 x 30 25 x 3,53 50 24-FEO-L22-3S3/4-M10
L 28 1 160 25 24 44 36 36.5 45 26.2 52.4 70 59 14 M 10 x 30 32,92 x 3,53 50 24-FEO-L28-3S1-M10
L 35 1 1/4 160 27 30 57 41 46.5 50 30.2 58.7 79 73 24 M 12 x 35 37,7 x 3,53 85 24-FEO-L35-3S11/4-M12
L 42 1 1/2 160 36 36 58 50 47 55 35.7 69.9 94 83 19 M 12 x 35 47,22 x 3,53 85 24-FEO-L42-3S11/2-M12

S 20 3/4 350 19 16 43 30 32.5 42 22.2 47.6 65 52 16 M 10 x 30 25 x 3,53 50 24-FEO-S20-3S3/4-M10
S 25 3/4 350 19 19 45 30 33 42 22.2 47.6 65 52 16 M 10 x 30 25 x 3,53 50 24-FEO-S25-3S3/4-M10
S 25 1 1/4 280 27 20 55 41 43 50 30.2 58.7 79 73 24 M 12 x 35 37,7 x 3,53 85 24-FEO-S25-3S11/4-M12
S 30 1 350 25 25 47 36 33.5 45 26.2 52.4 70 59 14 M 10 x 30 32,92 x 3,53 50 24-FEO-S30-3S1-M10
S 30 1 1/4 280 27 25 57 41 43.5 50 30.2 58.7 79 73 24 M 12 x 35 37,7 x 3,53 85 24-FEO-S30-3S11/4-M12
S 38 1 1/4 280 27 28 59 41 43 50 30.2 58.7 79 73 24 M 12 x 35 37,7 x 3,53 85 24-FEO-S38-3S11/4-M12
S 38 1 1/2 210 32 32 64 50 48 55 35.7 69.9 94 83 19 M 12 x 35 47,22 x 3,53 85 24-FEO-S38-3S11/2-M12

Example for comp. :
WFS33/18L
252

l2
dx
lg2
M
SW2
d
y
l
3
i
d
1
O-ring
B
S1
A
S
2
Series
Tube OD
d1
Fl.
size
PB dx dy lg2 SW2 l2 l3 S1 S2 A B i 4 x cyl.
screws
S 16 1/2 400 12 12 38 24 29.5 39 18.3 40.5 56 47 14 M 8 x 30 18,66 x 3,53 25 24-FEO-S16-6S1/2-M8
S 16 3/4 400 17 12 45 32 36.5 48 23.8 50.8 71 60 16 M 10 x 35 25 x 3,53 50 24-FEO-S16-6S3/4-M10
S 20 3/4 400 17 16 46 32 35.5 48 23.8 50.8 71 60 16 M 10 x 35 25 x 3,53 50 24-FEO-S20-6S3/4-M10
S 25 3/4 400 17 18 48 32 36 48 23.8 50.8 71 60 16 M 10 x 35 25 x 3,53 50 24-FEO-S25-6S3/4-M10
S 25 1 400 24 20 53 41 41 60 27.8 57.2 81 70 21 M 12 x 45 32,92 x 3,53 85 24-FEO-S25-6S1-M12
S 25 1 1/4 400 24 24 58 46 46 68 31.8 66.7 95 78 23 M 14 x 50 37,7 x 3,53 135 24-FEO-S25-6S11/4-M14
S 30 1 400 24 24 55 41 41.5 60 27.8 57.2 81 70 21 M 12 x 45 32,92 x 3,53 85 24-FEO-S30-6S1-M12
S 30 1 1/4 400 31 25 58 46 44.5 68 31.8 66.7 95 78 23 M 14 x 50 37,7 x 3,53 135 24-FEO-S30-6S11/4-M14
S 38 1 1/4 315 31 30 61 46 45 68 31.8 66.7 95 78 23 M 14 x 50 37,7 x 3,53 135 24-FEO-S38-6S11/4-M14
S 38 1 1/2 315 36 32 72 50 56 76 36.5 79.4 113 95 25 M 16 x 55 47,22 x 3,53 210 24-FEO-S38-6S11/2-M16

Example for comp. :
WFS62/16S
253
4
Flange couplings with cutting ring and square
flange connection, Individual parts

255
4
individual parts

Series
Tube OD
PB Hole circle kg/100
ca.
Order designation
L 10 315 35 9.5 24-FS-L10-HC35
L 12 315 35 9.7 24-FS-L12-HC35
L 15 100 40 12.4 24-FS-L15-HC40
L 15 250 35 10.2 24-FS-L15-HC35
L 18 100 40 12.2 24-FS-L18-HC40
L 22 100 40 12.3 24-FS-L22-HC40
L 28 100 40 15.9 24-FS-L28-HC40
L 28 100 55 30.4 24-FS-L28-HC55
L 35 100 55 39.8 24-FS-L35-HC55

S 16 315 35 16.4 24-FS-S16-HC35

For O-rings, see
chapter 3.
Example for comp. :
BFG10L/LK35OMD
256
individual parts

Series
Tube OD
PB Hole circle kg/100
ca.
Order designation
L 10 315 35 14.2 24-FE-L10-HC35
L 12 315 35 15.7 24-FE-L12-HC35
L 15 100 40 20.1 24-FE-L15-HC40
L 15 250 35 15.0 24-FE-L15-HC35
L 18 100 35 17.9 24-FE-L18-HC35
L 18 100 40 16.9 24-FE-L18-HC40
L 22 100 40 17.7 24-FE-L22-HC40
L 28 100 40 26.0 24-FE-L28-HC40
L 35 100 40 32.2 24-FE-L35-HC40
L 35 100 55 46.6 24-FE-L35-HC55

S 12 315 35 27.1 24-FE-S12-HC35
S 16 315 35 17.3 24-FE-S16-HC35
S 20 250 40 20.2 24-FE-S20-HC40
S 20 250 55 44.9 24-FE-S20-HC55
S 20 315 35 22.3 24-FE-S20-HC35
S 25 250 55 49.1 24-FE-S25-HC55
S 30 250 55 49.8 24-FE-S30-HC55

For O-rings, see
chapter 3.
Example for comp. :
BFW10L/LK35OMD
257
4
Flange couplings with cutting ring connection and split
SAE flange, individual parts

259
4
Straight / elbow
flange couplings
individual parts
1 = 2 flange halves
2 = Straight flange stub connector
3 = Elbow flange stud connector

2
3
1
Series
Tube OD
Fl.
size
kg/100
ca.
Order designation
1
kg/100
ca.
Order designation
2
kg/100
ca.
Order designation
3
L 18 3/4 4.3 GP-FCS-3S3/4-D10,75 21.3 24-FSX-L18-3S3/4 31.4 24-FEX-L18-3S3/4
L 22 3/4 4.3 GP-FCS-3S3/4-D10,75 20.2 24-FSX-L22-3S3/4 29.6 24-FEX-L22-3S3/4
L 28 1 5.8 GP-FCS-3S1-D10,75 28.2 24-FSX-L28-3S1 40.4 24-FEX-L28-3S1
L 35 1 1/4 7.9 GP-FCS-3S11/4-D12,75 36.3 24-FSX-L35-3S11/4 67.0 24-FEX-L35-3S11/4
L 42 1 1/2 22.8 GP-FCS-3S11/2-D13,5 48.2 24-FSX-L42-3S11/2 110.9 24-FEX-L42-3S11/2

S 20 3/4 4.3 GP-FCS-3S3/4-D10,75 23.8 24-FSX-S20-3S3/4 31.9 24-FEX-S20-3S3/4
S 25 1 1/4 7.9 GP-FCS-3S11/4-D12,75 43.3 24-FSX-S25-3S11/4 62.2 24-FEX-S25-3S11/4
S 30 1 5.8 GP-FCS-3S1-D10,75 36.4 24-FSX-S30-3S1 45.2 24-FEX-S30-3S1

For O-rings, see
chapter 3.
Order design. part 1 depends on
screw/bolt size.
Example for comp. :
FHS33X
GFS33/18LX
WFS33/18LX
260
Straight / elbow
flange couplings
individual parts
1 = 2 flange halves
2 = Straight flange stub connector
3 = Elbow flange stud connector

2
3
1
Series
Tube OD
Fl.
size
kg/100
ca.
Order designation
1
kg/100
ca.
Order designation
2
kg/100
ca.
Order designation
3
S 16 1/2 25.0 GP-FCS-6S1/2-D8,75 15.7 24-FEX-S16-6S1/2
S 25 1 25.0 GP-FCS-6S1-D13 46.1 24-FSX-S25-6S1 59.3 24-FEX-S25-6S1
S 30 1 25.0 GP-FCS-6S1-D13 43.4 24-FSX-S30-6S1 61.2 24-FEX-S30-6S1
S 38 1 1/2 68.3 GP-FCS-6S11/2-D17 82.0 24-FSX-S38-6S11/2 131.7 24-FEX-S38-6S11/2

For O-rings, see
chapter 3.
Example for comp. :
FHS63X
GFS63/16SX
WFS63/16SX
261
4
ZAKO flared flanges with SAE flange connection

263
4
Connecting flange couplings
ZAKO system
Hole pattern according to
SAE J 518 C / ISO 6162
Permitted operating pressure (PB) 250 bar

d1
s
d3
d2
i
l
2
l
3
A
S2
S
1

B

Tube
d1 x s
Fl.
size
d2 d3 l2
ca.
l3 S1 S2 A B i
ca.
4 x cyl.
screws
Nm kg/100
ca.
Order designation
16 x 2 1/2 30 10.5 32 8 17.5 38.1 55 45 13 M 8 x 45 35 43.9 Z-TPO-16x2-3S1/2-M8-C19
16 x 2,5 1/2 30 9.5 32 8 17.5 38.1 55 45 13 M 8 x 45 35 43.9 Z-TPO-16x2,5-3S1/2-M8-C19
16 x 3 1/2 30 8.5 32 8 17.5 38.1 55 45 13 M 8 x 45 35 43.9 Z-TPO-16x3-3S1/2-M8-C19
20 x 2,5 3/4 38 13.5 32 8 22.2 47.6 65 50 13 M 10 x 45 69 54.7 Z-TPO-20x2,5-3S3/4-M10-C19
20 x 3 3/4 38 12.5 32 8 22.2 47.6 65 50 13 M 10 x 45 69 54.8 Z-TPO-20x3-3S3/4-M10-C19
25 x 3 3/4 38 17 32.5 8.5 22.2 47.6 65 50 12.5 M 10 x 45 69 66.9 Z-TPO-25x3-3S3/4-M10-C19
25 x 4 3/4 38 15 32.5 8.5 22.2 47.6 65 50 12.5 M 10 x 45 69 67.3 Z-TPO-25x4-3S3/4-M10-C19
30 x 4 1 46 20 42.5 8.5 26.2 52.4 72 60 12.5 M 10 x 50 69 80.1 Z-TPO-30x4-3S1-M10-C19
30 x 5 1 46 17 42.5 8.5 26.2 52.4 72 60 12.5 M 10 x 50 69 81.3 Z-TPO-30x5-3S1-M10-C19
38 x 4 1 1/4 52 28 44 9 30.2 58.7 79 73 16 M 12 x 60 120 106.7 Z-TPO-38x4-3S11/4-M12-C19
38 x 5 1 1/4 52 56 44 9 30.2 58.7 79 73 16 M 12 x 60 120 107.2 Z-TPO-38x5-3S11/4-M12-C19
38 x 6 1 1/4 52 23 44 9 30.2 58.7 79 73 16 M 12 x 60 120 107.3 Z-TPO-38x6-3S11/4-M12-C19
42 x 2 1 1/4 52 34 44 9 30.2 58.7 79 73 16 M 10 x 60 69 80.1 Z-TPO-42x2-3S11/4-M10-C19
50 x 2,5 1 1/2 63 42 46 10 35.7 69.9 94 83 14 M 12 x 60 120 136.3 Z-TPO-50x2,5-3S11/2-M12-C19
50 x 5 1 1/2 63 37 46 10 35.7 69.9 94 83 14 M 12 x 60 120 136.9 Z-TPO-50x5-3S11/2-M12-C19
50 x 6 1 1/2 63 35 46 10 35.7 69.9 94 83 14 M 12 x 60 120 136.8 Z-TPO-50x6-3S11/2-M12-C19
50 x 8 1 1/2 63 31 46 10 35.7 69.9 94 83 14 M 12 x 60 120 140.0 Z-TPO-50x8-3S11/2-M12-C19
65 x 3 2 75 55 60 11 42.9 77.8 102 97 15 M 12 x 75 120 189.0 Z-TPO-65x3-3S2-M12-C19
65 x 4 2 75 54 60 11 42.9 77.8 102 97 15 M 12 x 75 120 183.0 Z-TPO-65x4-3S2-M12-C19
65 x 5 2 75 52 60 11 42.9 77.8 102 97 15 M 12 x 75 120 186.3 Z-TPO-65x5-3S2-M12-C19
80 x 3 3 100 71 66 16 61.9 106.4 135 131 24 M 16 x 90 295 405.6 Z-TPO-80x3-3S3-M16-C19

The pressure ratings stated by
the tube manufacturers are the criteria
for selecting tube dimensions.
ASME code states that
a reduced operating pressure
applies to flange sizes 2" and 3".
Example for comp. :
FE-1620-8/3
264
ZAKO system
SAE J 518 C / ISO 6162
Reducers

d1
s
d3
d2
i
l
2
l
3
A
S2
S
1

B

Tube
d1 x s
Fl.
size
d2 d3 l2
ca.
l3 S1 S2 A B i
ca.
4 x cyl.
screws
Nm kg/100
ca.
Order designation
25 x 3 1 38 17 38.5 8.5 26.2 52.4 72 60 16.5 M 10 x 55 69 64.0 Z-TPO-25x3-3S1-M10-C19
25 x 4 1 38 15 38.5 8.5 26.2 52.4 72 60 16.5 M 10 x 55 69 64.6 Z-TPO-25x4-3S1-M10-C19
30 x 4 1 1/4 46 20 42 8.5 30.2 58.7 79 73 18 M 12 x 60 120 105.5 Z-TPO-30x4-3S11/4-M12-C19
30 x 5 1 1/4 46 17 43.5 8.5 30.2 58.7 79 73 16.5 M 12 x 60 120 105.7 Z-TPO-30x5-3S11/4-M12-C19
50 x 2,5 2 63 42 52.5 10 42.9 77.8 102 97 22.5 M 12 x 75 120 193.0 Z-TPO-50x2,5-3S2-M12-C19
50 x 5 2 63 37 53 10 42.9 77.8 102 97 22 M 12 x 75 120 193.2 Z-TPO-50x5-3S2-M12-C19
50 x 6 2 63 35 55 10 42.9 77.8 102 97 20 M 12 x 75 120 193.1 Z-TPO-50x6-3S2-M12-C19
50 x 8 2 63 31 56 10 42.9 77.8 102 97 19 M 12 x 75 120 197.4 Z-TPO-50x8-3S2-M12-C19

applies to flange size 2".
Example for comp. :
FE-2530-16/3
265
4
ZAKO system
SAE J 518 C / ISO 6162
High pressure series (6000 psi)

d1
s
d3
d2
l
3
l
2
i
A
S2
B
S
1
Tube
d1 x s
Fl.
size
d2 d3 l2
ca.
l3 S1 S2 A B i
ca.
4 x cyl.
screws
Nm kg/100
ca.
Order designation
16 x 2 1/2 30 10.5 32 8 18.3 40.5 56 48 12 M 8 x 40 35 38.6 Z-TPO-16x2-6S1/2-M8-C19
16 x 2,5 1/2 30 9.5 32 8 18.3 40.5 56 48 12 M 8 x 40 35 38.6 Z-TPO-16x2,5-6S1/2-M8-C19
16 x 3 1/2 30 8.5 32 8 18.3 40.5 56 48 12 M 8 x 40 35 38.6 Z-TPO-16x3-6S1/2-M8-C19
20 x 2,5 3/4 38 13.5 37 8 23.9 50.8 71 60 13 M 10 x 40 69 69.2 Z-TPO-20x2,5-6S3/4-M10-C19
20 x 3 3/4 38 12.5 37 8 23.9 50.8 71 60 13 M 10 x 40 69 69.3 Z-TPO-20x3-6S3/4-M10-C19
20 x 3,5 3/4 38 11 37 8 23.9 50.8 71 60 13 M 10 x 40 69 69.6 Z-TPO-20x3,5-6S3/4-M10-C19
25 x 3 3/4 38 17 37.5 8.5 23.9 50.8 71 60 14.5 M 10 x 40 69 65.6 Z-TPO-25x3-6S3/4-M10-C19
25 x 4 3/4 38 15 37.5 8.5 23.9 50.8 71 60 14.5 M 10 x 40 69 66.0 Z-TPO-25x4-6S3/4-M10-C19
30 x 4 1 46 20 42.5 8.5 27.8 57.2 81 70 14.5 M 12 x 40 120 97.6 Z-TPO-30x4-6S1-M12-C19
30 x 5 1 46 17 42.5 8.5 27.8 57.2 81 70 14.5 M 12 x 40 120 98.7 Z-TPO-30x5-6S1-M12-C19
38 x 4 1 1/4 52 28 44 9 31.7 66.7 95 78 17.1 M 14 x 45 190 127.2 Z-TPO-38x4-6S11/4-M14-C19
38 x 5 1 1/4 52 26 44 9 31.7 66.7 95 78 17.1 M 14 x 45 190 127.0 Z-TPO-38x5-6S11/4-M14-C19
38 x 6 1 1/4 52 23 44 9 31.7 66.7 95 78 17.1 M 14 x 45 190 140.3 Z-TPO-38x6-6S11/4-M14-C19
50 x 5 1 1/2 63 37 56.5 10 36.5 79.4 113 95 22 M 16 x 60 295 230.8 Z-TPO-50x5-6S11/2-M16-C19
50 x 6 1 1/2 63 35 56.5 10 36.5 79.4 113 95 22 M 16 x 60 295 230.7 Z-TPO-50x6-6S11/2-M16-C19
50 x 8 1 1/2 63 31 56.5 10 36.5 79.4 113 95 22 M 16 x 60 295 233.1 Z-TPO-50x8-6S11/2-M16-C19
65 x 8 2 75 46 65 11 44.5 96.8 133 114 30 M 20 x 90 580 383.5 Z-TPO-65x8-6S2-M20-C19

Example for comp. :
FE-1620-8/6
266
ZAKO system
SAE J 518 C / ISO 6162
Reducers

d1
s
d3
d2
l
3
l
2
i
A
S2
B
S
1
Tube
d1 x s
Fl.
size
d2 d3 l2
ca.
l3 S1 S2 A B i
ca.
4 x cyl.
screws
Nm kg/100
ca.
Order designation
38 x 5 1 46 26 43 9 27.8 57.2 81 70 14 M 12 x 40 120 89.9 Z-TPO-38x5-6S1-M12-C19
50 x 5 2 63 37 58 10 44.5 96.8 133 114 32 M 20 x 90 580 438.5 Z-TPO-50x5-6S2-M20-C19
50 x 6 2 63 35 60 10 44.5 96.8 133 114 30 M 20 x 90 580 438.4 Z-TPO-50x6-6S2-M20-C19
50 x 8 2 63 31 61 10 44.5 96.8 133 114 34 M 20 x 90 580 440.7 Z-TPO-50x8-6S2-M20-C19

Example for comp. :
FE-3850-16/6
267
4
Tube connection flange couplings
ZAKO system
SAE J 518 C / ISO 6162

d1
s
l
2
l
3
d2
A
S2
B
S
1
Tube
d1 x s
Fl.
size
d2 l2
ca.
l3 S1 S2 A B 4 x cyl.
screws
Nm kg/100
ca.
Order designation
16 x 2 1/2 30 61.5 13.5 17.5 38.1 55 45 M 8 x 55 35 77.5 Z-TTO-16x2-3S1/2-M8-C19
16 x 2,5 1/2 30 61.5 13.5 17.5 38.1 55 45 M 8 x 55 35 77.5 Z-TTO-16x2,5-3S1/2-M8-C19
16 x 3 1/2 30 61.5 13.5 17.5 38.1 55 45 M 8 x 55 35 77.5 Z-TTO-16x3-3S1/2-M8-C19
20 x 2,5 3/4 38 61.5 13.5 22.2 47.6 65 50 M 10 x 55 69 96.6 Z-TTO-20x2,5-3S3/4-M10-C19
20 x 3 3/4 38 61.5 13.5 22.2 47.6 65 50 M 10 x 55 69 97.0 Z-TTO-20x3-3S3/4-M10-C19
20 x 3,5 3/4 38 61.5 13.5 22.2 47.6 65 50 M 10 x 55 69 97.4 Z-TTO-20x3,5-3S3/4-M10-C19
25 x 3 3/4 38 62 14 22.2 47.6 65 50 M 10 x 55 69 106.0 Z-TTO-25x3-3S3/4-M10-C19
25 x 4 3/4 38 62 14 22.2 47.6 65 50 M 10 x 55 69 106.4 Z-TTO-25x4-3S3/4-M10-C19
30 x 4 1 46 82.5 14.5 26.2 52.4 72 60 M 10 x 60 69 149.0 Z-TTO-30x4-3S1-M10-C19
30 x 5 1 46 82.5 14.5 26.2 52.4 72 60 M 10 x 60 69 151.2 Z-TTO-30x5-3S1-M10-C19
38 x 4 1 1/4 52 86 16 30.2 58.7 79 73 M 12 x 75 120 198.6 Z-TTO-38x4-3S11/4-M12-C19
38 x 5 1 1/4 52 86 16 30.2 58.7 79 73 M 12 x 75 120 197.1 Z-TTO-38x5-3S11/4-M12-C19
38 x 6 1 1/4 52 86 16 30.2 58.7 79 73 M 12 x 75 120 197.0 Z-TTO-38x6-3S11/4-M12-C19
50 x 2,5 1 1/2 63 89 17 35.7 69.9 94 83 M 12 x 75 120 255.8 Z-TTO-50x2,5-3S11/2-M12-C19
50 x 5 1 1/2 63 89 17 35.7 69.9 94 83 M 12 x 75 120 256.3 Z-TTO-50x5-3S11/2-M12-C19
50 x 6 1 1/2 63 89 17 35.7 69.9 94 83 M 12 x 75 120 255.8 Z-TTO-50x6-3S11/2-M12-C19
50 x 8 1 1/2 63 89 17 35.7 69.9 94 83 M 12 x 75 120 256.8 Z-TTO-50x8-3S11/2-M12-C19
50 x 9 1 1/2 63 89 17 35.7 69.9 94 83 M 12 x 75 120 257.1 Z-TTO-50x9-3S11/2-M12-C19
65 x 3 2 75 117 19 42.9 77.8 102 97 M 12 x 100 120 359.6 Z-TTO-65x3-3S2-M12-C19
65 x 4 2 75 117 19 42.9 77.8 102 97 M 12 x 100 120 353.2 Z-TTO-65x4-3S2-M12-C19
65 x 5 2 75 117 19 42.9 77.8 102 97 M 12 x 100 120 357.1 Z-TTO-65x5-3S2-M12-C19
80 x 3 3 100 129 29 61.9 106.4 135 131 M 16 x 110 295 756.0 Z-TTO-80x3-3S3-M16-C19

Example for comp. :
FG-1620-8/3
268
ZAKO system
SAE J 518 C / ISO 6162

d1
s
l
2

l
3
d2
A
S2
B
S
1
Tube
d1 x s
Fl.
size
d2 l2
ca.
screws
Nm kg/100
ca.
Order designation
16 x 2 1/2 30 61.5 13.5 18.3 40.5 56 48 M 8 x 50 35 72.0 Z-TTO-16x2-6S1/2-M8-C19
16 x 2,5 1/2 30 61.5 13.5 18.3 40.5 56 48 M 8 x 50 35 72.0 Z-TTO-16x2,5-6S1/2-M8-C19
16 x 3 1/2 30 61.5 13.5 18.3 40.5 56 48 M 8 x 50 35 72.0 Z-TTO-16x3-6S1/2-M8-C19
20 x 2,5 3/4 38 71.5 13.5 23.9 50.8 71 60 M 10 x 50 69 132.5 Z-TTO-20x2,5-6S3/4-M10-C19
20 x 3 3/4 38 71.5 13.5 23.9 50.8 71 60 M 10 x 50 69 132.9 Z-TTO-20x3-6S3/4-M10-C19
20 x 3,5 3/4 38 71.5 13.5 23.9 50.8 71 60 M 10 x 50 69 133.2 Z-TTO-20x3,5-6S3/4-M10-C19
25 x 3 3/4 38 72 14 23.9 50.8 71 60 M 10 x 50 69 128.2 Z-TTO-25x3-6S3/4-M10-C19
25 x 4 3/4 38 72 14 23.9 50.8 71 60 M 10 x 50 69 128.9 Z-TTO-25x4-6S3/4-M10-C19
30 x 4 1 46 82.5 14.5 27.8 57.2 81 70 M 12 x 50 120 193.6 Z-TTO-30x4-6S1-M12-C19
30 x 5 1 46 82.5 14.5 27.8 57.2 81 70 M 12 x 50 120 195.8 Z-TTO-30x5-6S1-M12-C19
38 x 4 1 1/4 52 86 16 31.7 66.7 95 78 M 14 x 60 190 248.6 Z-TTO-38x4-6S11/4-M14-C19
38 x 5 1 1/4 52 86 16 31.7 66.7 95 78 M 14 x 60 190 248.9 Z-TTO-38x5-6S11/4-M14-C19
38 x 6 1 1/4 52 86 16 31.7 66.7 95 78 M 14 x 60 190 262.7 Z-TTO-38x6-6S11/4-M14-C19
50 x 5 1 1/2 63 110 17 36.5 79.4 113 95 M 16 x 75 295 442.6 Z-TTO-50x5-6S11/2-M16-C19
50 x 6 1 1/2 63 110 17 36.5 79.4 113 95 M 16 x 75 295 442.2 Z-TTO-50x6-6S11/2-M16-C19
50 x 8 1 1/2 63 110 17 36.5 79.4 113 95 M 16 x 75 295 444.7 Z-TTO-50x8-6S11/2-M16-C19
50 x 9 1 1/2 63 110 17 36.5 79.4 113 95 M 16 x 75 295 446.0 Z-TTO-50x9-6S11/2-M16-C19
65 x 8 2 75 127 19 44.5 96.8 133 114 M 20 x 110 580 699.0 Z-TTO-65x8-6S2-M20-C19

Example for comp. :
FG-1620-8/6
269
4
ZAKO flared flanges with square flange connection

271
4
ZAKO system
Hole pattern VOSS square flange high pressure series

d1
s
d3
d2
l
3
l
2
i
A
D
A
Tube
d1 x s
NW d2 d3 l2
ca.
l3 A D i
ca.
4 x cyl.
screws
Nm kg/100
ca.
Order designation
16 x 2 12 30 10.5 28 8 50 42 12 M 8 x 40 35 42.2 Z-TPO-16x2-HC42-M8-C19
16 x 2,5 11 30 9.5 28 8 50 42 12 M 8 x 40 35 42.2 Z-TPO-16x2,5-HC42-M8-C19
16 x 3 10 30 8.5 28 8 50 42 12 M 8 x 40 35 42.2 Z-TPO-16x3-HC42-M8-C19
20 x 2,5 15 38 13.5 32 8 55 50 13 M 10 x 45 69 55.2 Z-TPO-20x2,5-HC50-M10-C19
20 x 3 14 38 12.5 32 8 55 50 13 M 10 x 45 69 55.3 Z-TPO-20x3-HC50-M10-C19
20 x 3,5 13 38 11 32 8 55 50 13 M 10 x 45 69 55.6 Z-TPO-20x3,5-HC50-M10-C19
25 x 3 19 38 17 32.5 8.5 55 50 12.5 M 10 x 45 69 65.4 Z-TPO-25x3-HC50-M10-C19
25 x 4 17 38 15 32.5 8.5 55 50 12.5 M 10 x 45 69 65.8 Z-TPO-25x4-HC50-M10-C19
30 x 4 22 46 20 37.5 8.5 65 62 17.5 M 12 x 55 120 87.3 Z-TPO-30x4-HC62-M12-C19
30 x 5 20 46 17 37.5 8.5 65 62 17.5 M 12 x 55 120 88.1 Z-TPO-30x5-HC62-M12-C19
38 x 4 30 52 28 39 9 80 72 16 M 12 x 55 120 124.4 Z-TPO-38x4-HC72-M12-C19
38 x 5 28 52 26 39 9 80 72 16 M 12 x 55 120 124.9 Z-TPO-38x5-HC72-M12-C19
38 x 6 26 52 23 39 9 80 72 16 M 12 x 55 120 125.1 Z-TPO-38x6-HC72-M12-C19
50 x 2,5 45 63 42 56 10 85 85 19 M 14 x 75 190 197.4 Z-TPO-50x2,5-HC85-M14-C19
50 x 2,5 45 63 42 56 10 100 98 19 M 16 x 75 295 290.1 Z-TPO-50x2,5-HC98-M16-C19
50 x 5 40 63 37 56 10 85 85 19 M 14 x 75 190 197.9 Z-TPO-50x5-HC85-M14-C19
50 x 5 40 63 37 56 10 100 98 19 M 16 x 75 295 290.5 Z-TPO-50x5-HC98-M16-C19
50 x 6 38 63 35 56 10 85 85 19 M 14 x 75 190 197.9 Z-TPO-50x6-HC85-M14-C19
50 x 6 38 63 35 56 10 100 98 19 M 16 x 75 295 290.5 Z-TPO-50x6-HC98-M16-C19
50 x 8 34 63 31 56 10 85 85 19 M 14 x 75 190 201.1 Z-TPO-50x8-HC85-M14-C19
50 x 8 34 63 31 56 10 100 98 19 M 16 x 75 295 294.0 Z-TPO-50x8-HC98-M16-C19
50 x 9 32 63 29 56 10 85 85 19 M 14 x 75 190 201.1 Z-TPO-50x9-HC85-M14-C19
50 x 9 32 63 29 56 10 100 98 19 M 16 x 75 295 294.0 Z-TPO-50x9-HC98-M16-C19
Example for comp. :
FE-1620
272
ZAKO system

d1
s
d3
d2
l
3
l
2
i
A
D
A
Tube
d1 x s
NW d2 d3 l2
ca.
l3 A D i
ca.
4 x cyl.
screws
Nm kg/100
ca.
Order designation
60 x 3 54 75 51 64 15 100 98 26 M 16 x 90 295 289.0 Z-TPO-60x3-HC98-M16-C19
60 x 5 50 75 47 64 15 100 98 26 M 16 x 90 295 295.0 Z-TPO-60x5-HC98-M16-C19
60 x 10 40 75 35 64 15 100 98 26 M 16 x 90 295 292.0 Z-TPO-60x10-HC98-M16-C19
65 x 8 49 75 46 60 11 120 118 30 M 20 x 90 580 430.5 Z-TPO-65x8-HC118-M20-C19
75 x 12,5 50 95 45 72 16 120 118 28 M 20 x 100 580 522.0 Z-TPO-75x12,5-HC118-M20-C19
80 x 3 74 100 71 76 16 150 145 34 M 24 x 110 800 820.0 Z-TPO-80x3-HC145-M24-C19
80 x 8 64 100 60 80 20 150 145 30 M 24 x 110 800 861.0 Z-TPO-80x8-HC145-M24-C19
80 x 10 60 100 55 80 16 150 145 30 M 24 x 110 800 859.0 Z-TPO-80x10-HC145-M24-C19
88 x 14 60 110 54 84 20 150 145 36 M 24 x 120 800 951.0 Z-TPO-88x14-HC145-M24-C19
101,6 x 16 70 114 63.6 88.5 20 150 145 32 M 24 x 120 800 1132.0 Z-TPO-101,6x16-HC145-C19
114,3 x 17,5 80 140 73 92 20 180 175 38 M 30 x 130 1500 1400.0 Z-TPO-114,3x17,5-HC175-M30-C19

Example for comp. :
FE-6030
273
4
ZAKO system

d1
s
d2
l
3
l
2

A
D
A
Tube
d1 x s
NW d2 l2
ca.
l3 A D 4 x cyl.
screws
Nm kg/100
ca.
Order designation
16 x 2 12 30 53.5 13.5 50 42 M 8 x 65 35 81.2 Z-TTO-16x2-HC42-M8-C19
16 x 2,5 11 30 53.5 13.5 50 42 M 8 x 65 35 81.3 Z-TTO-16x2,5-HC42-M8-C19
16 x 3 10 30 53.5 13.5 50 42 M 8 x 65 35 81.4 Z-TTO-16x3-HC42-M8-C19
20 x 2,5 15 38 61.5 13.5 55 50 M 10 x 75 69 106.3 Z-TTO-20x2,5-HC50-M10-C19
20 x 3 14 38 61.5 13.5 55 50 M 10 x 75 69 106.8 Z-TTO-20x3-HC50-M10-C19
20 x 3,5 13 38 61.5 13.5 55 50 M 10 x 75 69 107.1 Z-TTO-20x3,5-HC50-M10-C19
25 x 3 19 38 62 14 55 50 M 10 x 75 69 126.6 Z-TTO-25x3-HC50-M10-C19
25 x 4 17 38 62 14 55 50 M 10 x 75 69 127.3 Z-TTO-25x4-HC50-M10-C19
30 x 4 22 46 72.5 14.5 65 62 M 12 x 90 120 168.0 Z-TTO-30x4-HC62-M12-C19
30 x 5 20 46 72.5 14.5 65 62 M 12 x 90 120 170.4 Z-TTO-30x5-HC62-M12-C19
38 x 4 30 52 76 16 80 72 M 12 x 90 120 243.1 Z-TTO-38x4-HC72-M12-C19
38 x 5 28 52 76 16 80 72 M 12 x 90 120 243.4 Z-TTO-38x5-HC72-M12-C19
38 x 6 26 52 76 16 80 72 M 12 x 90 120 243.5 Z-TTO-38x6-HC72-M12-C19
50 x 2,5 45 63 109 17 85 85 M 14 x 120 190 379.3 Z-TTO-50x2,5-HC85-M14-C19
50 x 2,5 45 63 109 17 100 98 M 16 x 130 295 565.2 Z-TTO-50x2,5-HC98-M16-C19
50 x 5 40 63 109 17 85 85 M 14 x 120 190 379.8 Z-TTO-50x5-HC85-M14-C19
50 x 5 40 63 109 17 100 98 M 16 x 130 295 565.7 Z-TTO-50x5-HC98-M16-C19
50 x 6 38 63 109 17 85 85 M 14 x 120 190 379.3 Z-TTO-50x6-HC85-M14-C19
50 x 6 38 63 109 17 100 98 M 16 x 130 295 565.2 Z-TTO-50x6-HC98-M16-C19
50 x 8 34 63 109 17 85 85 M 14 x 120 190 385.5 Z-TTO-50x8-HC85-M14-C19
50 x 8 34 63 109 17 100 98 M 16 x 130 295 571.4 Z-TTO-50x8-HC98-M16-C19
Example for comp. :
FG-1620
274
ZAKO system

d1
s
d2
l
3
l
2

A
D
A
Tube
d1 x s
NW d2 l2
ca.
l3 A D 4 x cyl.
screws
Nm kg/100
ca.
Order designation
50 x 9 32 63 109 17 85 85 M 14 x 120 190 385.9 Z-TTO-50x9-HC85-M14-C19
50 x 9 32 63 109 17 100 98 M 16 x 130 295 571.8 Z-TTO-50x9-HC98-M16-C19
60 x 3 54 75 125 27 100 98 M 16 x 150 295 551.0 Z-TTO-60x3-HC98-M16-C19
60 x 5 50 75 125 27 100 98 M 16 x 150 295 568.3 Z-TTO-60x5-HC98-M16-C19
60 x 10 40 75 125 27 100 98 M 16 x 150 295 554.8 Z-TTO-60x10-HC98-M16-C19
65 x 8 49 75 117 19 120 118 M 20 x 140 580 820.0 Z-TTO-65x8-HC118-M20-C19
75 x 12,5 50 95 150 28 120 118 M 20 x 180 580 1003.0 Z-TTO-75x12,5-HC118-M20-C19
80 x 3 74 100 134 29 150 145 M 24 x 180 800 1580.0 Z-TTO-80x3-HC145-M24-C19
80 x 8 64 100 141 36 150 145 M 24 x 180 800 1658.0 Z-TTO-80x8-HC145-M24-C19
80 x 10 60 100 141 36 150 145 M 24 x 180 800 1654.0 Z-TTO-80x10-HC145-M24-C19
88 x 14 60 110 172 36 150 145 M 24 x 200 800 1796.0 Z-TTO-88x14-HC145-M24-C19
101,6 x 16 70 114 173 36 150 145 M 24 x 160 800 2054.0 Z-TTO-101,6x16-HC145-M24-C19
114,3 x 17,5 80 140 180 36 180 175 M 30 x 170 1500 2565.0 Z-TTO-114,3x17,5-HC175-M30-C19

Example for comp. :
FG-5090
275
4
ZAKO, individual parts

277
4
ZAKO ring with O-ring
O-ring is supplied in package, but not installed

d
s
Tube
d1 x s
Fl.
size
(SAE 3000 psi)
Fl.
size
(SAE 6000 psi)
Fl.
size NW
(square fl.)
kg/100
ca.
O-ring
d x s
Order designation
16 x 2 1/2 1/2 12 4.1 18.6 x 3.5 Z-RGO-16x2-C19
16 x 2,5 1/2 1/2 11 4.1 18.6 x 3.5 Z-RGO-16x2,5-C19
16 x 3 1/2 1/2 10 4.1 18.6 x 3.5 Z-RGO-16x3-C19
20 x 2,5 3/4 3/4 15 6.5 25 x 3.5 Z-RGO-20x2,5-C19
20 x 3 3/4 3/4 14 6.6 25 x 3.5 Z-RGO-20x3-C19
20 x 3,5 3/4 3/4 13 6.9 25 x 3.5 Z-RGO-20x3,5-C19
25 x 3 3/4, 1" 3/4 19 6.9 25 x 3.5 Z-RGO-25x3-C19
25 x 4 3/4, 1" 3/4 17 7.2 25 x 3.5 Z-RGO-25x4-C19
30 x 4 1, 1 1/4" 1 22 10.3 32.9 x 3.5 Z-RGO-30x4-C19
30 x 5 1, 1 1/4" 1 20 11.5 32.9 x 3.5 Z-RGO-30x5-C19
38 x 4 1 1/4 1 1/4 30 14.5 37.7 x 3.5 Z-RGO-38x4-C19
38 x 5 1 1/4 1 1/4 28 15.0 37.7 x 3.5 Z-RGO-38x5-C19
38 x 5 1 1 11.6 32.9 x 3.5 Z-RGO-38x5-HD46-C19
38 x 6 1 1/4 1 1/4 26 15.2 37.7 x 3.5 Z-RGO-38x6-C19
42 x 2 1 1/4 15.9 37.7 x 3.5 Z-RGO-42x2-C19
50 x 2,5 1 1/2, 2" 45 27.6 47.2 x 3.5 Z-RGO-50x2,5-C19
50 x 5 1 1/2, 2" 1 1/2 40 28.1 47.2 x 3.5 Z-RGO-50x5-C19
50 x 6 1 1/2, 2" 1 1/2 38 28.0 47.2 x 3.5 Z-RGO-50x6-C19
50 x 8 1 1/2, 2" 1 1/2 34 31.3 47.2 x 3.5 Z-RGO-50x8-C19
50 x 9 1 1/2, 2" 1 1/2 32 31.0 47.2 x 3.5 Z-RGO-50x9-C19
60 x 3 54 43.9 56.7 x 3.5 Z-RGO-60x3-C19
60 x 5 50 50.0 56.7 x 3.5 Z-RGO-60x5-C19
60 x 10 40 47.1 56.7 x 3.5 Z-RGO-60x10-C19
60 x 10 50 88.7 60 x 5 Z-RGO-60x10-HD95-C19
Example for comp. :
K-1620-8
278

d
s
Tube
d1 x s
Fl.
size
(SAE 3000 psi)
Fl.
size
(SAE 6000 psi)
Fl.
size NW
(square fl.)
kg/100
ca.
O-ring
d x s
Order designation
65 x 3 2 35.2 60 x 3.5 Z-RGO-65x3-C19
65 x 4 2 28.8 60 x 3.5 Z-RGO-65x4-C19
65 x 5 2 32.6 56.7 x 3.5 Z-RGO-65x5-C19
65 x 8 2 49 47.1 56.7 x 3.5 Z-RGO-65x8-C19
75 x 12,5 50 99.0 60 x 5 Z-RGO-75x12,5-C19
75 x 12,5 60 150.0 75 x 5 Z-RGO-75x12,5-HD110-C19
80 x 3 3 74 86.9 85.3 x 3.5 Z-RGO-80x3-C19
80 x 8 64 128.1 75 x 5 Z-RGO-80x8-C19
80 x 10 60 126.3 75 x 5 Z-RGO-80x10-C19
88 x 14 60 158.0 75 x 5 Z-RGO-88x14-C19
101,6 x 16 70 172.0 80 x 5 Z-RGO-101,6x16-C19
114,3 x 17,5 80 260.0 95 x 5 Z-RGO-114,3x17,5-C19

Example for comp. :
K-6530-8
279
4
ZAKO ring

Tube
d1 x s
Fl.
size
(SAE 3000 psi)
Fl.
size
(SAE 6000 psi)
Fl.
size NW
(square fl.)
kg/100
ca.
Order designation
16 x 2 1/2 1/2 12 3.3 Z-R-16x2-C19
16 x 2,5 1/2 1/2 11 3.4 Z-R-16x2,5-C19
16 x 3 1/2 1/2 10 3.5 Z-R-16x3-C19
20 x 2,5 3/4 3/4 15 5.3 Z-R-20x2,5-C19
20 x 3 3/4 3/4 14 5.7 Z-R-20x3-C19
20 x 3,5 3/4 3/4 13 5.7 Z-R-20x3,5-C19
25 x 3 3/4 3/4 19 5.6 Z-R-25x3-C19
25 x 4 3/4 3/4 17 5.9 Z-R-25x4-C19
30 x 4 1 1 22 8.8 Z-R-30x4-C19
30 x 5 1 1 20 9.9 Z-R-30x5-C19
38 x 4 1 1/4 1 1/4 30 13.9 Z-R-38x4-C19
38 x 5 1 11.0 Z-R-38x5-HD46-C19
38 x 5 1 1/4 1 1/4 13.7 Z-R-38x5-C19
38 x 6 1 1/4 1 1/4 26 13.6 Z-R-38x6-C19
42 x 2 1 1/4 15.0 Z-R-42x2-C19
50 x 2,5 1 1/2 45 24.9 Z-R-50x2,5-C19
50 x 5 1 1/2 1 1/2 40 24.9 Z-R-50x5-C19
50 x 6 1 1/2 1 1/2 38 24.4 Z-R-50x6-C19
50 x 8 1 1/2 1 1/2 34 27.4 Z-R-50x8-C19
50 x 9 1 1/2 1 1/2 32 27.1 Z-R-50x9-C19
60 x 3 54 40.0 Z-R-60x3-C19
60 x 5 50 51.0 Z-R-60x5-C19
60 x 10 40 40.0 Z-R-60x10-C19
65 x 3 2 32.4 Z-R-65x3-C19
65 x 4 2 26.9 Z-R-65x4-C19
65 x 5 2 32.0 Z-R-65x5-C19
65 x 8 2 2 42.6 Z-R-65x8-C19
Example for comp.:
KO-1620-8
280
ZAKO ring

Tube
d1 x s
Fl.
size
(SAE 3000 psi)
Fl.
size
(SAE 6000 psi)
Fl.
size NW
(square fl.)
kg/100
ca.
Order designation
75 x 12,5 50 94.0 Z-R-75x12,5-C19
80 x 3 3 79.8 Z-R-80x3-C19
80 x 8 64 122.3 Z-R-80x8-C19
80 x 10 60 120.1 Z-R-80x10-C19
88 x 14 60 154.0 Z-R-88x14-C19
101,6 x 16 70 154.0 Z-R-101,6x16-C19
114,3 x 17,5 80 230.0 Z-R-114,3x17,5-C19

Example for comp. :
KO-75125-8
281
4
SAE flange ZAKO
Part 1: standard series (3000 psi)
Part 2: high-pressure series (6000 psi)

2
1
Tube OD Fl.
size
(SAE 3000 psi)
Fl.
size
(SAE 6000 psi)
kg/100
ca.
Order designation
16 1/2 26.1 Z-FPH-16-6S1/2-D9-C19
16 1/2 30.6 Z-FPH-16-3S1/2-D9-C19
20 3/4 49.4 Z-FPH-20-6S3/4-D11-C19
20 3/4 33.7 Z-FPH-20-3S3/4-D11-C19
25 1 45.5 Z-FPH-30/25-3S1-D11-C19
25 3/4 45.5 Z-FPH-25-6S3/4-D11-C19
25 3/4 45.5 Z-FPH-25-3S3/4-D11-C19
30 1 68.7 Z-FPH-30-6S1-D13,5-C19
30 1 1/4 69.8 Z-FPH-30-3S11/4-D13,5-C19
30 1 54.1 Z-FPH-30-3S1-D11-C19
38 1 1/4 86.1 Z-FPH-38-6S11/4-D15,5-C19
38 1 59.6 Z-FPH-38-6S1-D13,5-C19
38 1 1/4 66.8 Z-FPH-38-3S11/4-D13,5-C19
38 1 54.1 Z-FPH-38-3S1-D10,5-C19
42 1 1/4 65.8 Z-FPH-42-3S11/4-D11-C19
50 1 1/2 154.0 Z-FPH-50-6S11/2-D17,5-C19
50 2 304.0 Z-FPH-50-6S2-D22-C19
50 1 1/2 83.3 Z-FPH-50-3S11/2-D13,5-C19
50 2 136.1 Z-FPH-50-3S2-D13,5-C19
65 2 248.3 Z-FPH-65-6S2-D22-C19
65 2 123.4 Z-FPH-65-3S2-D13,5-C19
80 3 250.7 Z-FPH-80-3S3-D17,5-C19

applies to flange sizes 2" and 3"
(3000 psi).
Example for comp. :
FE-1600-8/3
FE-1600-8/6
282
SAE counterflange ZAKO
Part 1: standard series (3000 psi)
Part 2: high-pressure series (6000 psi)

1
2
Tube OD Fl.
size
(SAE 3000 psi)
Fl.
size
(SAE 6000 psi)
kg/100
ca.
Order designation
16 1/2 28.5 Z-FPT-16-6S1/2-IM8-C19
16 1/2 28.6 Z-FPT-16-3S1/2-IM8-C19
20 3/4 55.7 Z-FPT-20-6S3/4-IM10-C19
20 3/4 34.0 Z-FPT-20-3S3/4-IM10-C19
25 3/4 52.6 Z-FPT-25-6S3/4-IM10-C19
25 3/4 30.8 Z-FPT-25-3S3/4-IM10-C19
30 1 82.0 Z-FPT-30-6S1-IM12-C19
30 1 1/4 75.5 Z-FPT-30-3S11/4-IM10-C19
30 1 57.7 Z-FPT-30-3S1-IM10-C19
38 1 1/4 100.5 Z-FPT-38-6S11/4-IM14-C19
38 1 70.1 Z-FPT-38-6S1-IM12-C19
38 1 1/4 73.4 Z-FPT-38-3S11/4-IM12-C19
42 1 1/4 48.0 Z-FPT-42-3S11/4-IM10-C19
50 1 1/2 177.2 Z-FPT-50-6S11/2-IM16-C19
50 1 1/2 90.0 Z-FPT-50-3S11/2-IM12-C19
65 2 253.1 Z-FPT-65-6S2-IM20-C19
65 2 129.4 Z-FPT-65-3S2-IM12-C19
80 3 257.9 Z-FPT-80-3S3-IM16-C19

applies to flange sizes 2" and 3"
(3000 psi).
Example for comp. :
FV-1600-8/3
FV-1600-8/6
283
4
Square flange ZAKO

Tube OD NW kg/100
ca.
Order designation
16 10, 11, 12 30.6 Z-FPH-16-HC42-D9-C19
20 13, 14, 15 35.2 Z-FPH-20-HC50-D11-C19
25 17, 19 45.0 Z-FPH-25-HC50-D11-C19
30 20, 22 54.8 Z-FPH-30-HC62-D13,5-C19
38 26, 28, 30 87.7 Z-FPH-38-HC72-D13,5-C19
50 32, 34, 38, 40, 45 129.0 Z-FPH-50-HC85-D15,5-C19
50 32, 34, 38, 40, 45 207.7 Z-FPH-50-HC98-D17,5-C19
60 40 383.7 Z-FPH-75/60-HC118-D22-C19
60 40, 50, 54 182.2 Z-FPH-60-HC98-D17,5-C19
65 49 280.2 Z-FPH-65-HC118-D22-C19
75 50 307.0 Z-FPH-75-HC118-D22-C19
75 50 584.0 Z-FPH-88/75-HC145-D26-C19
80 60, 64, 74 552.0 Z-FPH-80-HC145-D26-C19
88 60 576.0 Z-FPH-88-HC145-D26-C19
101.6 70 648.0 Z-FPH-101,6-HC145-D26-C19
114.3 80 760.0 Z-FPH-114,3-HC175-D33-C19

applies to flange size NW 40
Z-FPH-75/60-HC118-D22-C19
Example for comp. :
FE-1600
284
ZAKO LP flared flange with SAE flange connection

285
4
ZAKO LP system
Hole pattern according to SAE J 518 C / ISO 6162-1

d1
s
l
2
i
l
3

d3
d2
A
S2
B
S
1
Tube
d1 x s
NW d2 d3 l2
ca.
l3 S1 S2 A B i
ca.
4 x cyl.
screws
Nm kg/100
ca.
Order designation
48,3 x 3,2 1 1/2 63 39 35 10 35.7 69.9 94 83 15.5 M 12 x 50 85 82.6 Z-TPO-LP48,3x3,2-3S11/2-M12
48,3 x 4 1 1/2 63 36.5 35 10 35.7 69.9 94 83 15.5 M 12 x 50 85 85.1 Z-TPO-LP48,3x4-3S11/2-M12
60,3 x 3,6 2 72 49 42 15 42.9 77.8 102 97 18 M 12 x 60 85 109.8 Z-TPO-LP60,3x3,6-3S2-M12
60,3 x 3,6 2 1/2 85 49 42 15 50.8 88.9 114 109 18 M 12 x 60 85 161.8 Z-TPO-LP60,3x3,6-3S21/2-M12
60,3 x 4,5 2 1/2 85 47.5 42 15 50.8 88.9 114 109 18 M 12 x 60 85 149.5 Z-TPO-LP60,3x4,5-3S21/2-M12
76,1 x 3,6 3 100 65.5 50 16 61.9 106.4 135 131 20 M 16 x 70 210 262.2 Z-TPO-LP76,1x3,6-3S3-M16
76,1 x 4,5 3 100 63.5 50 16 61.9 106.4 135 131 20 M 16 x 70 210 216.8 Z-TPO-LP76,1x4,5-3S3-M16
88,9 x 3,6 3 1/2 114 78 56 20 69.9 120.7 152 140 19 M 16 x 75 210 341.0 Z-TPO-LP88,9x3,6-3S31/2-M16
88,9 x 5 3 1/2 114 74.5 56 20 69.9 120.7 152 140 19 M 16 x 75 210 347.2 Z-TPO-LP88,9x5-3S31/2-M16
114,3 x 3,6 4 130 102 62 20 77.8 130.2 162 152 28 M 16 x 90 210 442.1 Z-TPO-LP114,3x3,6-3S4-M16
114,3 x 6,3 4 130 96 62 20 77.8 130.2 162 152 28 M 16 x 90 210 456.1 Z-TPO-LP114,3x6,3-3S4-M16

286
Tube connection flange
couplings ZAKO LP system

d1
s
l
3l
2
d3
d2
A
S2
B
S
1
Tube
d1 x s
NW d2 d3 l2
ca.
screws
Nm kg/100
ca.
Order designation
48,3 x 3,2 1 1/2 63 39 66 17 35.7 69.9 94 83 M 12 x 80 85 168.0 Z-TTO-LP48,3x3,2-3S11/2-M12
48,3 x 4 1 1/2 63 36.5 66 17 35.7 69.9 94 83 M 12 x 80 85 173.0 Z-TTO-LP48,3x4-3S11/2-M12
60,3 x 3,6 2 72 49 81 27 42.9 77.8 102 97 M 12 x 100 85 222.0 Z-TTO-LP60,3x3,6-3S2-M12
60,3 x 3,6 2 1/2 85 49 81 27 50.8 88.9 114 109 M 12 x 100 85 323.0 Z-TTO-LP60,3x3,6-3S21/2-M12
60,3 x 4,5 2 1/2 85 47.5 81 27 50.8 88.9 114 109 M 12 x 100 85 302.0 Z-TTO-LP60,3x4,5-3S21/2-M12
76,1 x 3,6 3 100 65.5 96 28 61.9 106.4 135 131 M 16 x 110 210 530.0 Z-TTO-LP76,1x3,6-3S3-M16
76,1 x 4,5 3 100 63.5 96 28 61.9 106.4 135 131 M 16 x 110 210 446.0 Z-TTO-LP76,1x4,5-3S3-M16
88,9 x 3,6 3 1/2 114 78 108 36 69.9 120.7 152 140 M 16 x 130 210 682.0 Z-TTO-LP88,9x3,6-3S31/2-M16
88,9 x 5 3 1/2 114 74.5 108 36 69.9 120.7 152 140 M 16 x 130 210 693.0 Z-TTO-LP88,9x5-3S31/2-M16
114,3 x 3,6 4 130 102 120 36 77.8 130.2 162 152 M 16 x 140 210 844.2 Z-TTO-LP114,3x3,6-3S4-M16
114,3 x 6,3 4 130 96 120 36 77.8 130.2 162 152 M 16 x 140 210 870.1 Z-TTO-LP114,3x6,3-3S4-M16

287
4
Tube connection flange
couplings ZAKO LP system

d1
s
l
3
l
1
l
2
d2
A
S2
B
S
1
Tube
d1 x s
NW d2 l1 approx. l2
ca.
screws
Nm kg/100
ca.
Order designation
48,3 x 3,2 1 1/2 63 31.5 47.5 20 35.7 69.9 94 83 M12 x 70 85 86.0 Z-PT-LP48,3x3,2-3S11/2-M12
48,3 x 4 1 1/2 63 31.5 47.5 20 35.7 69.9 94 83 M12 x 70 85 88.0 Z-PT-LP48,3x4-3S11/2-M12
60,3 x 3,6 2 1/2 85 39 58 20.5 50.8 88.9 114 109 M12 x 80 85 161.0 Z-PT-LP60,3x3,6-3S21/2-M12
60,3 x 3,6 2 72 39 55 20.5 42.9 77.8 102 97 M12 x 80 85 113.0 Z-PT-LP60,3x3,6-3S2-M12
60,3 x 4,5 2 1/2 85 39 58 20.5 50.8 88.9 114 109 M12 x 80 85 152.0 Z-PT-LP60,3x4,5-3S21/2-M12
76,1 x 3,6 3 100 46 68 27 61.9 106.4 135 131 M16 x 90 210 268.0 Z-PT-LP76,1x3,6-3S3-M16
76,1 x 4,5 3 100 46 68 27 61.9 106.4 135 131 M16 x 90 210 229.0 Z-PT-LP76,1x4,5-3S3-M16
88,9 x 3,6 3 1/2 114 52 74 27.5 69.9 120.7 152 140 M16 x 110 210 341.0 Z-PT-LP88,9x3,6-3S31/2-M16
88,9 x 5 3 1/2 114 52 74 27.5 69.9 120.7 152 140 M16 x 110 210 347.0 Z-PT-LP88,9x5-3S31/2-M16
114,3 x 3,6 4 130 58 83 30 77.8 130.2 152 162 M16 x 140 210 Z-PT-LP114,3x3,6-3S4-M16
114,3 x 6,3 4 130 58 83 30 77.8 130.2 152 162 M16 x 140 210 Z-PT-LP114,3x6,3-3S4-M16

288
Tube connection
component
ZAKO LP system
SAE J 518 C / ISO 6162-1
90 elbow
Permitted operating pressure
(PB) 60 bar

S1
S
2
L
141
135
D
s
L
Tube
d1 x s
NW L S1 S2 4 x cyl.
screws
43,3 x 2,6 1 1/2 104 35.7 69.9 M 12 x 35 47,22 x 3,53 85 Z-TTEO-LP43,3x2,6-3S11/2-M12-C24
60,3 x 2,9 2 123 42.9 77.8 M 12 x 35 56,74 x 3,53 85 Z-TTEO-LP60,3x2,9-3S2-M12-C24
88,9 x 3,2 3 161 61.9 106.4 M 16 x 45 85,32 x 3,53 210 Z-TTEO-LP88,9x3,2-3S3-M16-C24
114,3 x 3,6 4 207.5 77.77 130.18 M 16 x 50 110,72 x 3,53 210 Z-TTEO-LP114,3x3,6-3S4-M16-C24

289
4
Tube connection
component
ZAKO LP system
SAE J 518 C / ISO 6162-1
T-coupling
Standard O-ring material is
NBR
Permitted operating pressure
(PB) 60 bar

S1
S
2
L L
L
D
s
141
135
Tube
d1 x s
NW L S1 S2 4 x cyl.
screws
48,3 x 2,6 1 1/2 102 35.7 69.9 M 12 x 35 47,22 x 3,53 85 Z-TTTO-LP48,3x2,6-3S11/2-M12-C24
60,3 x 2,9 2 111 42.9 77.8 M 12 x 35 56,74 x 3,53 85 Z-TTTO-LP60,3x2,9-3S2-M12-C24
88,9 x 3,2 3 130 61.9 106.4 M 16 x 45 85,32 x 3,53 210 Z-TTTO-LP88,9x3,2-3S3-M16-C24
114,3 x 3,6 4 207.5 77.77 130.18 M 16 x 50 110,72 x 3,53 210 Z-TTTO-LP114,3x3,6-3S4-M16-C24

290
ZAKO LP system

d
s
Tube
d1 x s
NW O-ring
d x s
Order designation
48,3 x 3,2 1 1/2 47.22 x 3.53 Z-RGO-LP48,3x3,2
48,3 x 4 1 1/2 47.22 x 3.53 Z-RGO-LP48,3x4
60,3 x 3,6 2 56.74 x 3.53 Z-RGO-LP60,3x3,6
60,3 x 3,6 2 1/2 69.44 x 3.53 Z-RGO-LP60,3x3,6-HD85
60,3 x 4,5 2 1/2 69.44 x 3.53 Z-RGO-LP60,3x4,5
76,1 x 3,6 3 85.32 x 3.53 Z-RGO-LP76,1x3,6
76,1 x 4,5 3 85.32 x 3.53 Z-RGO-LP76,1x4,5
88,9 x 3,6 3 1/2 98.02 x 3.53 Z-RGO-LP88,9x3,6
88,9 x 5 3 1/2 98.02 x 3.53 Z-RGO-LP88,9x5
114,3 x 3,6 4 110.72 x 3.53 Z-RGO-LP114,3x3,6
114,3 x 6,3 4 110.72 x 3.53 Z-RGO-LP114,3x6,3

For O-rings, see
chapter 3.
291
4
ZAKO ring
ZAKO LP system

Tube
d1 x s
NW Order designation
48,3 x 3,2 1 1/2 Z-R-LP48,3x3,2
48,3 x 4 1 1/2 Z-R-LP48,3x4
60,3 x 3,6 2 Z-R-LP60,3x3,6
60,3 x 3,6 2 1/2 Z-R-LP60,3x3,6-HD85
60,3 x 4,5 2 1/2 Z-R-LP60,3x4,5
76,1 x 3,6 3 Z-R-LP76,1x3,6
76,1 x 4,5 3 Z-R-LP76,1x4,5
88,9 x 3,6 3 1/2 Z-R-LP88,9x3,6
88,9 x 5 3 1/2 Z-R-LP88,9x5
114,3 x 3,6 4 Z-R-LP114,3x3,6
114,3 x 6,3 4 Z-R-LP114,3x6,3

292
SAE flange
ZAKO LP system

Tube OD NW Order designation
48.3 1 1/2 Z-FPH-LP48,3-3S11/2-D13,5
60.3 2 Z-FPH-LP60,3-3S2-D13,5
60.3 2 1/2 Z-FPH-LP60,3-3S21/2-D13,5
76.1 3 Z-FPH-LP76,1-3S3-D17,5
88.9 3 1/2 Z-FPH-LP88,9-3S31/2-D17,5
114.3 4 Z-FPH-LP114,3-3S4-D17,5

293
4
Hydraulic valves

295
5
Voss products
P.298
Product information hydraulic
valves
P.302
Function description non-return
valves
P.303
Function description non-return
valve cartridge inserts
P.305
Function description internal valve
part installation kits
P.306
Function description shuttle valves
P.307
Standard non-return valves VNRO VNROI VNROPT VNROTP
P.309 P.310 P.312 P.314
Content Type/Page

296
High-pressure non-return valves VNROHP VNROPTHP VNROTPHP
P.316 P.317 P.319
Non-return valve plug-in cartridges VNRCO
P.321
Internal valve part installation kits VNRIO
P.322
Shuttle valves with ball seat VST
P.323
Shuttle valves with soft seals VSOT
P.325
Content Type/Page

297
5
Non-return valve with O-ring, direction of flow towards threaded stud, fully assembled with nut and ES-4 cutting ring, AD S16 tube,
G1/2 inch thread with PEFLEX profile ring seal, special 3 bar opening pressure
System
Function/
Component
Form Completion
Series/
Thread
24 DIN program
System
- - S C VNROTP 24
Non-return-valves with O-Ring, tube-to-port
Function/Component
Form
Complete connection (with tube connecting system)
Completion
Heavy series
Determines the series
Series/Thread
This characteristic identifies the components (e. g. hexagonal nut, union nut
connection systems are listed in the Suffix characteristics.

298
Tube OD/
Diameter
Thread Diameter
Sealing type/
Threaded bore
Suffix
- - 16 G ES4
ES-4 cutting ring
Suffix 5
different cutting ring systems, flared coupling parts, special dimensions, special
opening pressures )
3 bar
Suffix 3
using different cutting ring systems, flared coupling parts, special
dimensions, special opening pressures )
Elastomeric sealing
Type of seal for the connecting thread.
1/2 inch
States the nominal thread size (pitch is not stated for metric and imperial
thread sizes).
Diameter
Whitworth
Identifies the type of thread.
Thread
Tube OD/Diameter
- 1/2 E 3B
OD 16 mm

299
5
System
24 24 DIN program
Function
VNRCO Non-return valves cartridges with O-ring
VNRIO Non-return valves inner parts with O-ring
VNRO Non-return valves with O-ring
VNROHP Non-return valves with O-ring, high-pressure
VNROI Non-return valves with internal thread
VNROPT Non-return valves with O-ring, port-to-tube,
VNROPTHP Non-return valves with O-ring, port-to-tube,
high-pressure
VNROTP Non-return valves with O-ring, tube-to-port
VNROTPHP Non-return valves with O-ring, tube-to-port,
high-pressure
VS Shuttle valves
VSO Shuttle valves with O-ring
VSSWO Shuttle valves swivel with O-ring
Form
T Tee
Completion
Series/Thread
Series
L Light series
S Heavy series
Thread
M Metric
G Whitworth parallel
IG Internal thread, Whitworth parallel
IU Internal thread, UNF
Tube OD/Diameter
6 6 mm
System
Function/
Component
Form Completion
Series/
Thread
Tube OD/
Diameter
Thread Diameter
Sealing type/
Threaded bore
Suffix

300
8 8 mm
10 10 mm
12 12 mm
14 14 mm
15 15 mm
16 16 mm
18 18 mm
20 20 mm
22 22 mm
25 25 mm
28 28 mm
30 30 mm
35 35 mm
38 38 mm
42 42 mm
E Elastomeric sealing
F O-ring sealing
Suffix overview
Suffix 3 Opening pressure
Suffix 5 Completion
Suffix 3 Opening pressure
0,2B 0.2 bar
0,5B 0.5 bar
3B 3 bar

Suffix 5 Completion
1S 1S Cutting ring
BV10 BV-10 Set
24/37 24/37 Set
P Prole material
System
Function/
Component
Form Completion
Series/
Thread
Tube OD/
Diameter
Thread Diameter
Sealing type/
Threaded bore
Suffix

301
5
VOSS hydraulic valves for simple function processes in
hydraulic control circuits are a logical addition to our wide
range of tube couplings.
Non-return valves for in-line and block installation;
Intelligent couplings with throttle functions
Shuttle valves with ball seats and soft seals
Special valves
The valves described in the following section provide an
overview of the common valve types and sizes held on
stock for your convenience.
We are only too happy to advise you on modifications,
additional functional details or special customer-specific
development work.
Non-return valves
Shuttle valves
Special valves
Product information hydraulic valves

302
VOSS non-return valves are available in the following
design variants:
Line non-return valves with tube coupling at both ends
Screw-in non-return valves with metric fine thread or
Whitworth pipe thread and sealed with profile seals
High-pressure non-return valves
Non-return valve cartridge inserts
Internal valve part installation kits
Non-return valves are also used as suction valves or pre-
loading valves, depending on the opening pressure
Sealing is effected by a spring-loaded cone with an
integrated soft seal
Stroke limitation and damping pin on the seal cone
reduce wear
Flow direction from or to the threaded end of screw-in
non-return valves
Specially low flow resistance thanks to the shape of the
internal parts.
Opening pressures
Opening pressure of standard designs is 1 bar
For special opening pressures, see the following table on
VOSS non-return valves for standard and high-pressure
applications
Special opening pressures
Special opening pressures Standard High-pressure
0.2 X X
0.5 X X
1.5 X
2 X X
2.5 X X
3 X X
4 X
4.5 X
5 X
6 X
Other opening pressures upon request
Optimum design
Screw-in types
Valve plunger for diffrent variants
Function description non-return valves

303
5
0,0
0,5
1,0
1,5
2,0
2,5
3,0
3,5
1 100 1000
L6
L8
L10
L12 L15
L18
L22
L28
L42 L35
10
0,0
0,5
1,0
1,5
2,0
2,5
3,0
3,5
1 100 1000
S6
S8 S10 S12 S14 S16
S20 S25
S38 S30
10
P
r
e
s
s
u
r
e

l
o
s
s

p

[
b
a
r
]
In principle, suction inlet valves with low opening pressures
(e. g. 0.1 bar), or even without spring loading, can be
implemented. Vertical installation with an upward flow
direction is recommended for opening pressures of less
than 0.5 bar in order to avoid friction effects and ensure
that the disc seal is centred. However, in this case the
weight of the plunger and disc affects the opening
pressure.
Opening pressure tolerance: 20 %
Valves for less than 0.2 bar:
olerances cannot be specified
(too many undefined influencing factors).
Hydraulic end-position damping
Flow-optimized geometry
Flow resistances
Volume flow rate Q [l/min]
Pressure loss graphs: Non-return valves, 1 bar opening pressure,
L series
Pressure loss graphs: Non-return valves, 1 bar opening pressure,
S series
Volume flow rate Q [l/min]
P
r
e
s
s
u
r
e

l
o
s
s

p

[
b
a
r
]
Hydraulic oil: Shell Tellus 133
Oil temperature: 50C
Oil-viscosity: 36cSt
Hydraulic oil: Shell Tellus 133
Oil temperature: 50C
Oil-viscosity: 36cSt
Standard Max. opening pressure
Tube OD bar
L 6 L 28 6
L 35 5
L 42 2
S 6 S30 6
S 38 5
High-pressure Max. opening pressure
Tube OD bar
L 6 L 42 3
S 6 S 38 3
Maximum opening pressure

304
A B
L
1
D3
D1
30
D3
D1
D2
30
L
1
L
5
L
2
D
4
0
.
5
D2
D1
D
4
L
2
D3
D5
30
L
3 L
4
L
1
R
max
16
A
B
D2
A A
B
R
max
16
R
max
16
30
30
B
A
Mounting holes
Type D1 D2 D3 D4 D5 L1 L2 L3 L4 L5
(D10) (+0.2) min.
RVP 13 4 13.7 4 14 23.3 12 9 15 14.5
RVP 16 6 16.7 6 18.5 26.8 14.5 11.5 18.5 18
RVP 20 8 20.7 8 23.5 30.3 16 14 21 20.5
RVP 24 10 25 10 27.5 35.3 18 16 24 23.5
RVP 27 12 28 12 31.5 38.3 20 19 27 26.5
RVP 35 15 36 15 40.5 44.8 19.5 23 32.5 27.5
RVP 40 19 41 19 47.5 50.8 23 27.5 38.5 33
RVP 47 24 48 24 56 60.3 28 35 48 40.5
RVP 55 30 56.2 30 70 70.3 28 43 56 43.5
Pressure loss p as a function of the volume flow rate Q
As insert elements for mounting in plate structures of
hydraulic devices or for direct installation in machine
housings, VOSS non-return valve cartridge inserts permit
flow in one direction and prevent flow in the opposite
direction.
Non-return valve cartridge inserts are also used as suction
valves or pre-loading valves, depending on the opening
pressure.
The compact design of VOSS non-return valve cartridge
inserts makes them suitable for tight installation
situations.
Sealing is effected by a spring-loaded cone with an
integrated soft seal.
Stroke limitation and damping pin on the seal cone keep
wear to a minimum.
VOSS non-return valve cartridge inserts achieve
especi ally low flow resistance thanks to the shape of the
internal parts.
The crosswise holes through the VOSS non-return valve
cartridge inserts allow them to be used with different
inflow and outlet flow directions. The valve cartridges can
also be supplied without crosswise holes upon request.
Function description non-return valve cartridge inserts
Flow resistance

305
5
D
1
D
2
Identification dimensions
VOSS internal parts are available as kits that can be directly
installed into other assemblies, such as valve blocks,
manifolds and hydraulic units, which already have the
specified mounting holes.
The advantages of the kits are their compact design,
comprising a plunger/plate with integrated soft seal, a
spring and a bushing, as well as the same low-flow
resistance characteristics as the other non-return valves.
General technical data of all non-return valves
Materials and surface protection: steel bodies,
VOSScoat surface finish, NBR seals, other materials
available upon request
Installation orientation: any
Operating pressure: 100 / 160 / 250 / 400 / 630 bar
Temperature range: -35 C to +100 C
(other temperature ranges available upon request)
Pressure fluids: mineral-oil-based liquids
(valves for other media available upon request)
Plunger
and plate
Spring Bushing
Installation kit Installation
Mounting hole
Internal valve parts
Tube OD Series D1 D2 Order no.
Compl. internal parts kit
[mm] [mm] (1 bar. NBR seal)*
L 6 7.5 9.3 GP-VNRIO-L/S6
L 8 8.5 11.3 GP-VNRIO-L8
L 10 11.7 15.3 GP-VNRIO-L10-S12
L 12 14.8 18.8 GP-VNRIO-L12-S14
L 15 15.8 20.8 GP-VNRIO-L15
L 18 19.8 25.8 GP-VNRIO-L18
L 22 24.5 31.8 GP-VNRIO-L22
L 28 30 39.8 GP-VNRIO-L28
L 35 38 49.8 GP-VNRIO-L35
L 42 41 55.8 GP-VNRIO-L42

S 6 7.5 9.3 GP-VNRIO-L/S6
S 8 8.5 10.8 GP-VNRIO-S8
S 10 9.6 12.8 GP-VNRIO-S10
S 12 11.7 15.3 GP-VNRIO-L10-S12
S 14 14.8 18.8 GP-VNRIO-L12-S14
S 16 17 22.3 GP-VNRIO-S16
S 20 21.7 27.8 GP-VNRIO-S20
S 25 27 34.8 GP-VNRIO-S25
S 30 30 40.8 GP-VNRIO-S30
S 38 38 50.8 GP-VNRIO-S38
Part 2 Part 1
Function description internal valve part installation kits

306
A B
C
A B
C
Ball seat
VOSS shuttle valves (designation WV) are self-actuated
gate valves for closed hydraulic circuits.
With two inlet openings that can be blocked and one outlet
opening, a VOSS shuttle valve will connect either port A
or port B to the outlet port C, depending on the pressure
applied by the hydraulic fluid feed, whereby the lower-
pressure inlet is blocked by a movable ball.
This simple and sturdy valve design provides a mainte-
nance-free solution for many applications.
The valves operate automatically
VOSS shuttle valves are part of the one-way valve product
range.
Valve type: ball-seat valve
Available for tube in-line installation and as special
designs, also with tapered seal connections
Materials and surface protection:
Steel valve body, VOSS coat surface protection
Pressure fluids: mineral-oil-based
(valves for other media upon request)
Temperature range: -40 C to 120 C
Permitted leakage: 1 cm
3
/min
Ball-seat sealing
Flow resistance
Pressure loss p as a function of the volume flow rate
Caution!
Not suitable for use with compressed air and gases and
not to be used in conjunction with weld nipples!

307
5
A
B
C
B
C
Soft sealing
In a hydraulic circuit, VOSS soft-sealing shuttle valves have
the same function as ball-seat shuttle valves.
Type: soft-sealing valve with conical seat
For installation in-line in tubing systems
(other designs available upon request).
Materials and surface protection:
Steel valve body, VOSS coat surface protection
Seals made of NBR (FPM/FKM seals available upon
request)
Pressure fluids: mineral-oil-based
(valves for other media upon request)
Leak-tightness: absolutely leak-tight at pressures from
3 bar up (medium: hydraulic fluid)
Sealing principle:
The sliding sleeve on the shuttle cylinder
exposes the seal area when it strikes the bushing;
prevents the O-Ring facing the flow from being flushed
out.
Temperature range:
-35 C to +100 C for valves with NBR seals
-25 C to +200 C for valves with FPM / FKM seals
(available upon request)
Shuttle cylinder sealing
Sealing principle
Caution!
Not suitable for use with compressed air and gases and
not for use in conjunction with weld nipples!
Shuttle cylinder just
before it reaches the
end position
Shuttle cylinder
in end position

308
Standard non-return valves
Tube coupling on both ends
Opening pressure 1 bar
A
B

d1
SW4
SW1
l
g
l
2
Series
Tube OD
d1
Pressure lg l2 SW1 SW4 kg/100
ca.
Order designation
L 6 PB 250 43 29 17 17 4.4 24-VNRO-L6
L 8 PB 250 44 30 19 19 5.5 24-VNRO-L8
L 10 PB 250 54.5 40.5 22 24 9.8 24-VNRO-L10
L 12 PB 250 57.5 43.5 27 30 16.5 24-VNRO-L12
L 15 PB 250 61.5 47.5 30 32 20.5 24-VNRO-L15
L 18 PB 160 66.5 51.5 36 36 29.0 24-VNRO-L18
L 22 PB 160 76.5 61.5 41 46 49.5 24-VNRO-L22
L 28 PB 100 85 70 50 55 78.4 24-VNRO-L28
L 35 PB 100 95.5 74.5 60 65 122.7 24-VNRO-L35
L 42 PB 100 99.5 77.5 65 75 162.6 24-VNRO-L42

S 6 PB 630 48.5 34.5 19 19 6.6 24-VNRO-S6
S 8 PB 630 48.5 34.5 19 19 6.8 24-VNRO-S8
S 10 PB 630 55.5 40.5 22 24 11.5 24-VNRO-S10
S 12 PB 630 57.5 42.5 24 27 14.5 24-VNRO-S12
S 14 PB 630 63.5 47.5 27 32 20.9 24-VNRO-S14
S 16 PB 400 67.5 50.5 32 36 27.8 24-VNRO-S16
S 20 PB 400 75.5 54.5 41 46 49.5 24-VNRO-S20
S 25 PB 400 82.5 58.5 46 50 62.7 24-VNRO-S25
S 30 PB 250 96 69 55 60 107.8 24-VNRO-S30
S 38 PB 250 107.5 75.5 65 70 161.3 24-VNRO-S38

Test pressure PP = 1.5 times
value in table
Example for comp. :
RHD06LOMD
309
5
Non-return valves
Imperial internal thread on both ends
(standard design)
A
B

SW4
SW1
d1
i
1
l
1
Series
Tube OD
d1 Pressure l1 SW1 SW4 i1 kg/100
ca.
Order designation
L 6 G 1/8 A PB 250 50.5 19 19 8 10.4 GP-VNROI-IG1/8
L 6 G 1/4 A PB 250 55 19 19 12 11.7 GP-VNROI-IG1/4
L 10 G 3/8 A PB 250 68.5 24 27 12 21.0 GP-VNROI-IG3/8
L 15 G 1/2 A PB 250 74 32 36 14 35.5 GP-VNROI-IG1/2
L 18 G 3/4 A PB 160 84 41 46 16 80.7 GP-VNROI-IG3/4
L 22 G 1 A PB 160 96.5 46 50 18 89.2 GP-VNROI-IG1
L 28 G 1 1/4 A PB 100 110 60 60 20 189.0 GP-VNROI-IG11/4
L 35 G 1 1/2 A PB 100 119 65 70 22 237.6 GP-VNROI-IG11/2

value in table
Example for comp. :
RHDI1/8
310
Non-return valves
UNF internal thread according to SAE J 514
or ISO 11926-1
(standard design)
A
B

SW4
SW1
d1
i
1
l
1
Series
Tube OD
d1 Pressure l1 SW1 SW4 i1 kg/100
ca.
Order designation
S 6 7/16-20 UNF PB 630 57.5 19 19 11.5 11.5 GP-VNROI-IU7/16-20F
S 10 9/16-18 UNF PB 630 68 22 24 12.7 17.4 GP-VNROI-IU9/16-18F
S 16 7/8-14 UNF PB 400 80 32 36 16.7 44.0 GP-VNROI-IU7/8-14F
S 20 1 1/16-12 UN PB 400 91.5 41 46 19 79.8 GP-VNROI-IU11/16-12F
S 25 1 5/16-12 UN PB 400 98 46 50 19 93.0 GP-VNROI-IU15/16-12F
S 30 1 5/ 8-12 UN PB 250 104 55 60 19 153.8 GP-VNROI-IU15/8-12F
S 38 1 7/ 8-12 UN PB 250 117 65 70 19 221.4 GP-VNROI-IU17/8-12F

value in table
311
5
Flow direction from threaded stud
screw thread: metric fine thread, parallel
Standard seal material is NBR
A
B

d1
SW4
SW1
d2
d7
i
l
2
l
g
Series
Tube OD
d1
d2 Pressure d7 lg l2 SW1 SW4 i Nm
-10 %
kg/100
ca.
Order designation
L 6 M 10 x 1 PB 250 13.9 44 29 17 17 8 15 4.6 24-VNROPT-L6-M10E
L 8 M 12 x 1.5 PB 250 16.9 48 29 19 19 12 25 7.5 24-VNROPT-L8-M12E
L 10 M 14 x 1.5 PB 250 18.9 59 40 22 24 12 50 10.6 24-VNROPT-L10-M14E
L 12 M 16 x 1.5 PB 250 21.9 61.5 42.5 27 30 12 70 17.3 24-VNROPT-L12-M16E
L 15 M 18 x 1.5 PB 250 23.9 64.5 45.5 30 32 12 90 20.8 24-VNROPT-L15-M18E
L 18 M 22 x 1.5 PB 160 26.9 71.5 50 36 36 14 130 36.6 24-VNROPT-L18-M22E
L 22 M 26 x 1.5 PB 160 31.9 81 57.5 41 46 16 180 49.9 24-VNROPT-L22-M26E
L 28 M 33 x 2 PB 100 39.9 92 66.5 50 55 18 230 81.5 24-VNROPT-L28-M33E
L 35 M 42 x 2 PB 100 49.9 101.5 71 60 65 20 330 124.8 24-VNROPT-L35-M42E
L 42 M 48 x 2 PB 100 54.9 109.5 76.5 65 75 22 500 169.6 24-VNROPT-L42-M48E

S 6 M 12 x 1.5 PB 630 16.9 50.5 31.5 19 19 12 50 9.0 24-VNROPT-S6-M12E
S 8 M 14 x 1.5 PB 630 18.9 50.5 31.5 19 19 12 60 7.0 24-VNROPT-S8-M14E
S 10 M 16 x 1.5 PB 630 21.9 57.5 38 22 24 12 80 15.6 24-VNROPT-S10-M16E
S 12 M 18 x 1.5 PB 630 23.9 60.5 41 24 27 12 90 15.4 24-VNROPT-S12-M18E
S 14 M 20 x 1.5 PB 630 25.9 66.5 44.5 27 32 14 130 27.2 24-VNROPT-S14-M20E
S 16 M 22 x 1.5 PB 400 26.9 70.5 48 32 36 14 130 36.0 24-VNROPT-S16-M22E
S 20 M 27 x 2 PB 400 31.9 78.5 52 41 46 16 200 50.3 24-VNROPT-S20-M27E
S 25 M 33 x 2 PB 400 39.9 87 57 46 50 18 250 87.3 24-VNROPT-S25-M33E
S 30 M 42 x 2 PB 250 49.9 99.5 66 55 60 20 500 113.2 24-VNROPT-S30-M42E
S 38 M 48 x 2 PB 250 54.9 110 72 65 70 22 600 197.3 24-VNROPT-S38-M48E

value in table
Example for comp. :
RHV06LMEDOMD
312
Flow direction to threaded stud
screw thread: Whitworth pipe thread, parallel
A
B

d1
SW4
SW1
d2
d7
i
l
2
l
g
Series
Tube OD
d1
-10 %
kg/100
ca.
Order designation
L 6 G 1/8 A PB 250 13.9 44 29 17 17 8 20 5.7 24-VNROPT-L6-G1/8E
L 8 G 1/4 A PB 250 18.9 49 30 19 19 12 50 6.2 24-VNROPT-L8-G1/4E
L 10 G 1/4 A PB 250 18.9 59.5 40.5 22 24 12 50 10.6 24-VNROPT-L10-G1/4E
L 12 G 3/8 A PB 250 21.9 61.5 42.5 27 30 12 80 17.2 24-VNROPT-L12-G3/8E
L 15 G 1/2 A PB 250 26.9 66.5 45.5 30 32 14 100 21.9 24-VNROPT-L15-G1/2E
L 18 G 1/2 A PB 160 26.9 72.5 51 36 36 14 100 30.1 24-VNROPT-L18-G1/2E
L 22 G 3/4 A PB 160 31.9 80 56.5 41 46 16 180 48.8 24-VNROPT-L22-G3/4E
L 28 G 1 A PB 100 39.9 92 66.5 50 55 18 230 81.0 24-VNROPT-L28-G1E
L 35 G 1 1/4 A PB 100 49.9 102.5 72 60 65 20 330 126.6 24-VNROPT-L35-G11/4E
L 42 G 1 1/2 A PB 100 54.9 109.5 76.5 65 75 22 500 170.1 24-VNROPT-L42-G11/2E

S 6 G 1/4 A PB 630 18.9 50.5 31.5 19 19 12 60 7.0 24-VNROPT-S6-G1/4E
S 8 G 1/4 A PB 630 18.9 50.5 31.5 19 19 12 60 6.8 24-VNROPT-S8-G1/4E
S 10 G 3/8 A PB 630 21.9 57.5 38 22 24 12 90 12.0 24-VNROPT-S10-G3/8E
S 12 G 3/8 A PB 630 21.9 60.5 41 24 27 12 90 14.9 24-VNROPT-S12-G3/8E
S 14 G 1/2 A PB 630 26.9 66.5 44.5 27 32 14 150 22.2 24-VNROPT-S14-G1/2E
S 16 G 1/2 A PB 400 26.9 70.5 48 32 36 14 150 28.1 24-VNROPT-S16-G1/2E
S 20 G 3/4 A PB 400 31.9 78.5 52 41 46 16 200 50.2 24-VNROPT-S20-G3/4E
S 25 G 1 A PB 400 39.9 87.5 57.5 46 50 18 250 65.7 24-VNROPT-S25-G1E
S 30 G 1 1/4 A PB 250 49.9 97.5 64 55 60 20 500 108.2 24-VNROPT-S30-G11/4E
S 38 G 1 1/2 A PB 250 54.9 109.5 71.5 65 70 22 600 162.1 24-VNROPT-S38-G11/2E

value in table
Example for comp. :
RRHV06LREDOMD
313
5
A
B

d1
SW1
SW4
d2
d7
i
l
2
l
g
Series
Tube OD
d1
-10 %
kg/100
ca.
Order designation
L 6 M 10 x 1 PB 250 13.9 43 28 17 17 8 15 5.7 24-VNROTP-L6-M10E
L 8 M 12 x 1.5 PB 250 16.9 47.5 28.5 19 19 12 25 5.5 24-VNROTP-L8-M12E
L 10 M 14 x 1.5 PB 250 18.9 57.5 38.5 22 24 12 50 10.3 24-VNROTP-L10-M14E
L 12 M 16 x 1.5 PB 250 21.9 60 41 27 30 12 70 16.5 24-VNROTP-L12-M16E
L 15 M 18 x 1.5 PB 250 23.9 63 44 30 32 12 90 19.9 24-VNROTP-L15-M18E
L 18 M 22 x 1.5 PB 160 26.9 69.5 48 36 36 14 130 28.3 24-VNROTP-L18-M22E
L 22 M 26 x 1.5 PB 160 31.9 79.5 56 41 46 16 180 47.9 24-VNROTP-L22-M26E
L 28 M 33 x 2 PB 100 39.9 91 65.5 50 55 18 230 79.4 24-VNROTP-L28-M33E
L 35 M 42 x 2 PB 100 49.9 102 71.5 60 65 20 330 125.8 24-VNROTP-L35-M42E
L 42 M 48 x 2 PB 100 54.9 108.5 75.5 65 75 22 500 194.0 24-VNROTP-L42-M48E

S 6 M 12 x 1.5 PB 630 16.9 50.5 31.5 19 19 12 50 9.3 24-VNROTP-S6-M12E
S 8 M 14 x 1.5 PB 630 18.9 50.5 31.5 19 19 12 60 9.2 24-VNROTP-S8-M14E
S 10 M 16 x 1.5 PB 630 21.9 57.5 38 22 24 12 80 11.8 24-VNROTP-S10-M16E
S 12 M 18 x 1.5 PB 630 23.9 60.5 41 24 27 12 90 18.9 24-VNROTP-S12-M18E
S 14 M 20 x 1.5 PB 630 25.9 65.5 43.5 27 32 14 130 27.9 24-VNROTP-S14-M20E
S 16 M 22 x 1.5 PB 400 26.9 69 46.5 32 36 14 130 27.5 24-VNROTP-S16-M22E
S 20 M 27 x 2 PB 400 31.9 78.5 52 41 46 16 200 50.3 24-VNROTP-S20-M27E
S 25 M 33 x 2 PB 400 39.9 87 57 46 50 18 250 65.5 24-VNROTP-S25-M33E
S 30 M 42 x 2 PB 250 49.9 99.5 66 55 60 20 500 133.8 24-VNROTP-S30-M42E
S 38 M 48 x 2 PB 250 54.9 110.5 72.5 65 70 22 600 196.9 24-VNROTP-S38-M48E

value in table
Example for comp. :
RHZ06LMEDOMD
314
A
B

d1
SW1
SW4
d2
d7
i
l
2
l
g
Series
Tube OD
d1
-10 %
kg/100
ca.
Order designation
L 6 G 1/8 A PB 250 13.9 43 28 17 17 8 20 4.5 24-VNROTP-L6-G1/8E
L 8 G 1/4 A PB 250 18.9 47.5 28.5 19 19 12 50 5.8 24-VNROTP-L8-G1/4E
L 10 G 1/4 A PB 250 18.9 59 40 22 24 12 50 10.6 24-VNROTP-L10-G1/4E
L 12 G 3/8 A PB 250 21.9 60.5 41.5 27 30 12 80 16.8 24-VNROTP-L12-G3/8E
L 15 G 1/2 A PB 250 26.9 65 44 30 32 14 100 20.8 24-VNROTP-L15-G1/2E
L 18 G 1/2 A PB 160 26.9 69.5 48 36 36 14 100 28.0 24-VNROTP-L18-G1/2E
L 22 G 3/4 A PB 160 31.9 80.5 57 41 46 16 180 49.4 24-VNROTP-L22-G3/4E
L 28 G 1 A PB 100 39.9 92.5 67 50 55 18 230 81.9 24-VNROTP-L28-G1E
L 35 G 1 1/4 A PB 100 49.9 102 71.5 60 65 20 330 121.7 24-VNROTP-L35-G11/4E
L 42 G 1 1/2 A PB 100 54.9 108.5 75.5 65 75 22 500 167.2 24-VNROTP-L42-G11/2E

S 6 G 1/4 A PB 630 18.9 50.5 31.5 19 19 12 60 7.0 24-VNROTP-S6-G1/4E
S 8 G 1/4 A PB 630 18.9 50.5 31.5 19 19 12 60 6.9 24-VNROTP-S8-G1/4E
S 10 G 3/8 A PB 630 21.9 57.5 38 22 24 12 90 12.0 24-VNROTP-S10-G3/8E
S 12 G 3/8 A PB 630 21.9 60.5 41 24 27 12 90 15.0 24-VNROTP-S12-G3/8E
S 14 G 1/2 A PB 630 26.9 65.5 43.5 27 32 14 150 21.6 24-VNROTP-S14-G1/2E
S 16 G 1/2 A PB 400 26.9 70.5 48 32 36 14 150 28.0 24-VNROTP-S16-G1/2E
S 20 G 3/4 A PB 400 31.9 78.5 52 41 46 16 200 50.7 24-VNROTP-S20-G3/4E
S 25 G 1 A PB 400 39.9 87 57 46 50 18 250 65.6 24-VNROTP-S25-G1E
S 30 G 1 1/4 A PB 250 49.9 99.5 66 55 60 20 500 108.5 24-VNROTP-S30-G11/4E
S 38 G 1 1/2 A PB 250 54.9 110.5 72.5 65 70 22 600 161.8 24-VNROTP-S38-G11/2E

value in table
Example for comp. :
RHZ06LREDOMD
315
5
Tube coupling on both ends
A
B

d1
SW4
SW1
l
g
l
2
Series
Tube OD
d1
Pressure lg l2 SW1 SW4 kg/100
ca.
Order designation
L 6 PN 400 45.5 31.5 17 19 6.3 24-VNROHP-L6
L 8 PN 400 49 35 19 22 8.2 24-VNROHP-L8
L 10 PN 400 52 38 22 24 10.8 24-VNROHP-L10
L 12 PN 400 53 39 27 30 16.3 24-VNROHP-L12
L 15 PN 400 58 44 30 32 21.0 24-VNROHP-L15
L 18 PN 400 63 48 36 36 31.7 24-VNROHP-L18
L 22 PN 250 72.5 57.5 41 46 51.2 24-VNROHP-L22
L 28 PN 250 75.5 60.5 50 55 76.4 24-VNROHP-L28
L 35 PN 250 90 69 60 65 121.3 24-VNROHP-L35
L 42 PN 250 88 66 65 70 134.9 24-VNROHP-L42

S 6 PN 420 49 35 19 19 7.6 24-VNROHP-S6
S 8 PN 420 49 35 19 19 7.8 24-VNROHP-S8
S 10 PN 420 53 38 22 24 12.3 24-VNROHP-S10
S 12 PN 420 55 40 24 27 15.7 24-VNROHP-S12
S 14 PN 420 59 43 27 32 21.0 24-VNROHP-S14
S 16 PN 420 65 48 32 36 25.1 24-VNROHP-S16
S 20 PN 420 73 52 41 41 45.3 24-VNROHP-S20
S 25 PN 420 78 54 46 50 71.5 24-VNROHP-S25
S 30 PN 250 91 64 55 60 109.6 24-VNROHP-S30
S 38 PN 250 99 67 65 70 155.5 24-VNROHP-S38

316
A
B

d1
SW4
SW1
d2
d7
l
2
l
g
i
Series
Tube OD
d1
-10 %
kg/100
ca.
Order designation
L 6 M 10 x 1 PN 400 13.9 45 30 17 19 8 15 6.2 24-VNROPTHP-L6-M10E
L 8 M 12 x 1.5 PN 400 16.9 51 32 19 22 12 25 8.2 24-VNROPTHP-L8-M12E
L 18 M 22 x 1.5 PN 400 26.9 67 45.5 36 36 14 130 33.2 24-VNROPTHP-L18-M22E
L 22 M 26 x 1.5 PN 250 31.9 77 53.5 41 46 16 180 51.9 24-VNROPTHP-L22-M26E
L 28 M 33 x 2 PN 250 39.9 85.5 60 50 55 18 230 83.1 24-VNROPTHP-L28-M33E
L 35 M 42 x 2 PN 250 49.9 97.5 67 60 65 20 330 126.6 24-VNROPTHP-L35-M42E
L 42 M 48 x 2 PN 250 54.9 98.5 65.5 65 70 22 500 144.1 24-VNROPTHP-L42-M48E

S 6 M 12 x 1.5 PN 420 16.9 51 32 19 19 12 50 7.6 24-VNROPTHP-S6-M12E
S 8 M 14 x 1.5 PN 420 18.9 51 32 19 19 12 60 7.9 24-VNROPTHP-S8-M14E
S 10 M 16 x 1.5 PN 420 21.9 56.5 37 22 24 12 80 12.3 24-VNROPTHP-S10-M16E
S 12 M 18 x 1.5 PN 420 23.9 58 38.5 24 27 12 90 16.4 24-VNROPTHP-S12-M18E
S 16 M 22 x 1.5 PN 420 26.9 67 44.5 32 36 14 130 29.3 24-VNROPTHP-S16-M22E
S 20 M 27 x 2 PN 420 31.9 77 50.5 41 41 16 200 46.9 24-VNROPTHP-S20-M27E
S 25 M 33 x 2 PN 420 39.9 84.5 54.5 46 50 18 250 74.2 24-VNROPTHP-S25-M33E
S 30 M 42 x 2 PN 250 49.9 94 60.5 55 60 20 500 114.9 24-VNROPTHP-S30-M42E
S 38 M 48 x 2 PN 250 54.9 103.5 65.5 65 70 22 600 161.0 24-VNROPTHP-S38-M48E

317
5
A
B

d1
SW4
SW1
d2
d7
l
2
l
g
i
Series
Tube OD
d1
-10 %
kg/100
ca.
Order designation
L 6 G 1/8 A PN 400 13.9 45 30 17 19 8 20 6.2 24-VNROPTHP-L6-G1/8E
L 18 G 1/2 A PN 400 26.9 67 45.5 36 36 14 100 29.4 24-VNROPTHP-L18-G1/2E
L 22 G 3/4 A PN 250 31.9 77 53.5 41 46 16 180 51.9 24-VNROPTHP-L22-G3/4E
L 28 G 1 A PN 250 39.9 85.5 60 50 55 18 230 83.3 24-VNROPTHP-L28-G1E
L 35 G 1 1/4 A PN 250 49.9 97.5 67 60 65 20 330 126.3 24-VNROPTHP-L35-G11/4E
L 42 G 1 1/2 A PN 250 54.9 98.5 65.5 65 70 22 500 143.5 24-VNROPTHP-L42-G11/2E

S 6 G 1/4 A PN 420 18.9 51 32 19 19 12 60 7.8 24-VNROPTHP-S6-G1/4E
S 8 G 1/4 A PN 420 18.9 51 32 19 19 12 60 7.7 24-VNROPTHP-S8-G1/4E
S 10 G 3/8 A PN 420 21.9 56.5 37 22 24 12 90 13.1 24-VNROPTHP-S10-G3/8E
S 12 G 3/8 A PN 420 21.9 58 38.5 24 27 12 90 15.9 24-VNROPTHP-S12-G3/8E
S 25 G 1 A PN 420 39.9 84.5 54.5 46 50 18 250 74.4 24-VNROPTHP-S25-G1E
S 30 G 1 1/4 A PN 250 49.9 94 60.5 55 60 20 500 114.7 24-VNROPTHP-S30-G11/4E
S 38 G 1 1/2 A PN 250 54.9 103.5 65.5 65 70 22 600 160.5 24-VNROPTHP-S38-G11/2E

318
A
B

d1
SW1
SW4
d2
d7
l
2
l
g
i
Series
Tube OD
d1
-10 %
kg/100
ca.
Order designation
L 6 M 10 x 1 PN 400 13.9 44 29 17 19 8 15 6.0 24-VNROTPHP-L6-M10E
L 8 M 12 x 1.5 PN 400 16.9 51 32 19 22 12 25 8.2 24-VNROTPHP-L8-M12E
L 18 M 22 x 1.5 PN 400 26.9 67 45.5 36 36 14 130 29.5 24-VNROTPHP-L18-M22E
L 22 M 26 x 1.5 PN 250 31.9 77 53.5 41 46 16 180 51.4 24-VNROTPHP-L22-M26E
L 28 M 33 x 2 PN 250 39.9 80 54.5 50 55 18 230 74.7 24-VNROTPHP-L28-M33E
L 35 M 42 x 2 PN 250 49.9 97.5 67 60 65 20 330 126.8 24-VNROTPHP-L35-M42E
L 42 M 48 x 2 PN 250 54.9 98 65 65 70 22 500 143.5 24-VNROTPHP-L42-M48E

S 6 M 12 x 1.5 PN 420 16.9 51 32 19 19 12 50 7.6 24-VNROTPHP-S6-M12E
S 8 M 14 x 1.5 PN 420 18.9 51 32 19 19 12 60 7.9 24-VNROTPHP-S8-M14E
S 10 M 16 x 1.5 PN 420 21.9 56.5 37 22 24 12 80 13.1 24-VNROTPHP-S10-M16E
S 12 M 18 x 1.5 PN 420 23.9 56.5 37 24 27 12 90 15.7 24-VNROTPHP-S12-M18E
S 16 M 22 x 1.5 PN 420 26.9 67 44.5 32 36 14 130 29.5 24-VNROTPHP-S16-M22E
S 20 M 27 x 2 PN 420 31.9 77 50.5 41 41 16 200 46.9 24-VNROTPHP-S20-M27E
S 25 M 33 x 2 PN 420 39.9 82.5 52.5 46 50 18 250 71.3 24-VNROTPHP-S25-M33E
S 30 M 42 x 2 PN 250 49.9 94 60.5 55 60 20 500 114.9 24-VNROTPHP-S30-M42E
S 38 M 48 x 2 PN 250 54.9 103.5 65.5 65 70 22 600 162.9 24-VNROTPHP-S38-M48E

319
5
A
B

d1
SW1
SW4
d2
d7
l
2
l
g
i
Series
Tube OD
d1
-10 %
kg/100
ca.
Order designation
L 6 G 1/8 A PN 400 13.9 44 29 17 17 8 20 6.0 24-VNROTPHP-L6-G1/8E
L 18 G 1/2 A PN 400 26.9 67 45.5 36 36 14 100 31.7 24-VNROTPHP-L18-G1/2E
L 22 G 3/4 A PN 250 31.9 77 53.5 41 46 16 180 51.4 24-VNROTPHP-L22-G3/4E
L 28 G 1 A PN 250 39.9 80 54.5 50 55 18 230 71.8 24-VNROTPHP-L28-G1E
L 35 G 1 1/4 A PN 250 49.9 97.5 67 60 65 20 330 126.6 24-VNROTPHP-L35-G11/4E
L 42 G 1 1/2 A PN 250 54.9 98 65 65 70 22 500 142.9 24-VNROTPHP-L42-G11/2E

S 6 G 1/4 A PN 420 18.9 51 32 19 19 12 60 7.8 24-VNROTPHP-S6-G1/4E
S 8 G 1/4 A PN 420 18.9 51 32 19 19 12 60 7.8 24-VNROTPHP-S8-G1/4E
S 10 G 3/8 A PN 420 21.9 56.5 37 22 24 12 90 13.2 24-VNROTPHP-S10-G3/8E
S 12 G 3/8 A PN 420 21.9 56.5 37 24 27 12 90 19.5 24-VNROTPHP-S12-G3/8E
S 16 G 1/2 A PN 420 26.9 67 44.5 32 36 14 150 28.7 24-VNROTPHP-S16-G1/2E
S 20 G 3/4 A PN 420 31.9 77 50.5 41 46 16 200 46.6 24-VNROTPHP-S20-G3/4E
S 25 G 1 A PN 420 39.9 82.5 52.5 46 50 18 250 71.2 24-VNROTPHP-S25-G1E
S 30 G 1 1/4 A PN 250 49.9 94 60.5 55 60 20 500 114.7 24-VNROTPHP-S30-G11/4E
S 38 G 1 1/2 A PN 250 54.9 103.5 65.5 65 70 22 600 161.4 24-VNROTPHP-S38-G11/2E

320
Non-return valve plug-in cartridges
Flow direction B-A
(standard version)
A
B

l2
l3
l
l1
B A
d2
d
d
1
d
Type Pressure d d1 d2 l l1 l2 l3 kg/100
ca.
Order designation
RVP 13 PB 400 13 4 3 23 8 6 11 1.6 GP-VNRCO-13
RVP 16 PB 400 16 6 4.5 26.5 8 7 12 2.7 GP-VNRCO-16
RVP 20 PB 400 20 8 6 30 9 7 14 4.3 GP-VNRCO-20
RVP 24 PB 400 24 10 7 35 11 8 17 6.4 GP-VNRCO-24
RVP 27 PB 400 27 12 8.5 38 11 8 18 8.9 GP-VNRCO-27
RVP 35 PB 400 35 15 11 44.5 12 9.5 25 18.5 GP-VNRCO-35
RVP 40 PB 250 40 19 13.5 50.5 12 11 27.5 25.2 GP-VNRCO-40
RVP 47 PB 250 47 24 17 60 12 13 32 40.4 GP-VNRCO-47
RVP 55 PB 250 55 30 21.5 70 14 13 42 62.6 GP-VNRCO-55

Example for comp. :
RVP13
321
5
Internal valve part installation kits
Flow direction B-A
(standard version)
A
B

Installation Installation kit
l1
l2
d
2
d
5
d
3
d
4
6
0
1
0
d
1
Plunger
Part 1 Part 2
Seal here
Spring Bush
Ra 6,3 Rmax 16
Series
Tube OD
d1 d2 d3
+ 0.1
d4
+ 0.1
d5
0.1
l1
0.1
l2
+ 0.2
Order designation
L 6 4 4 9.6 8.6 8.6 16.5 2.5 70 GP-VNRIO-L/S6
L 8 6 6 11.5 10.5 10.5 16 2.5 70 GP-VNRIO-L8
L 10 8 8 15.5 14.5 14.5 21.8 2.5 70 GP-VNRIO-L10-S12
L 12 10 10 19 18 18 21 3 70 GP-VNRIO-L12-S14
L 15 12 12 21 20 20 23 3 70 GP-VNRIO-L15
L 18 15 15 26 25 25 24.5 3.5 70 GP-VNRIO-L18
L 22 19 19 32 31 30.6 29.2 4 80 GP-VNRIO-L22
L 28 24 24 40 39 38.5 34.5 4.5 90 GP-VNRIO-L28
L 35 30 30 50 49 48.6 32.2 4.5 70 GP-VNRIO-L35
L 42 36 36 56 55 54.2 31.7 5.5 70 GP-VNRIO-L42

S 6 4 4 9.6 8.6 8.6 16.5 2.5 70 GP-VNRIO-L/S6
S 8 5 5 11 10 10 15 2.5 70 GP-VNRIO-S8
S 10 7 7 13 12 12 22 2.5 70 GP-VNRIO-S10
S 12 8 8 15.5 14.5 14.5 21.8 2.5 70 GP-VNRIO-L10-S12
S 14 10 10 19 18 18 21 3 70 GP-VNRIO-L12-S14
S 16 12 12 22.5 21.5 21.5 24 3 70 GP-VNRIO-S16
S 20 16 16 28 27 27 28 3.5 70 GP-VNRIO-S20
S 25 20 20 35 34 33.6 28.7 4 70 GP-VNRIO-S25
S 30 25 25 41 40 39.6 32.3 4.5 70 GP-VNRIO-S30
S 38 32 32 51 50 49.2 34.7 4.5 70 GP-VNRIO-S38

Example for comp. :
ITL06L
322
Shuttle valves
Ball seat
Tube installation
A B
C

lg
l2
SW2
A B
C
d
d
1
l
g
2
Series
Tube OD
d1
Pressure d lg lg2 l2 SW2 kg/100
ca.
Order designation
L 8 PB 250 4.5 42 21 14 14 5.7 24-VST-L8-P
L 10 PB 250 6 44 22 15 17 7.4 24-VST-L10-P
L 12 PB 250 7.5 48 24 17 19 10.8 24-VST-L12-P
L 15 PB 250 10 56 28 21 19 12.4 24-VST-L15

S 6 PB 630 3 46 23 16 14 6.9 24-VST-S6-P
S 8 PB 630 4.5 48 24 17 17 9.5 24-VST-S8-P
S 10 PB 630 6 50 25 17.5 19 12.4 24-VST-S10-P
S 12 PB 630 7.5 58 29 21.5 22 17.7 24-VST-S12-P
S 16 PB 400 10 66 33 24.5 24 18.8 24-VST-S16

Example for comp. :
WV08LOMD
323
5
Shuttle valves
Ball seat
with taper connection
A B
C

lg
SW2
l2
B A
SW3
C
l
5
d
d
1
Series
Tube OD
d1
Pressure d lg l2 l5 SW2 SW3 kg/100
ca.
Order designation
L 12 PB 250 7.5 48 17 29.5 19 22 13.4 24-VSSWOT-L12-P

Example for comp. :
WV-ET12LOMD
324
Shuttle valves
Soft-sealing
Tube installation
A B
C

lg
l2
SW2
A
C
B d
d
1
l
g
2
Series
Tube OD
d1
Pressure d lg lg2 l2 SW2 kg/100
ca.
Order designation
L 8 PB 250 4.5 44 22 15 17 5.8 24-VSOT-L8-P
L 10 PB 250 5.6 44 22 15 17 7.4 24-VSOT-L10-P
L 12 PB 250 6.6 48 24 17 19 11.1 24-VSOT-L12-P
L 15 PB 250 8.5 56 28 21 19 26.0 24-VSOT-L15

S 6 PB 630 2.7 46 23 16 14 12.6 24-VSOT-S6-P
S 8 PB 630 4.5 48 24 17 17 12.1 24-VSOT-S8-P
S 10 PB 630 5.6 50 25 17.5 19 22.1 24-VSOT-S10-P
S 12 PB 630 6.6 58 29 21.5 22 17.9 24-VSOT-S12-P
S 16 PB 400 8.5 66 33 24.5 24 19.7 24-VSOT-S16

Example for comp. :
WV08LOMD
325
5
Pre-assembly devices and tools

327
6
Voss products
P.330
Product information VOSS pre-
assembly devices and tools
P.335
Pre-assembly devices TYPE80N3 TYPE90B2 TYPE90C2 TYPE85
P.344 P.345 P.346 P.347
Forming machines TYPE100 TYPE100C
P.348 P.349
Foot switch FOOT-
SWITCH1
P.350
Tube bending device TBM1
P.351
Thread gauge board TIB
P.352
Content Type/Page

328
Cone gauges CG
P.353
Inspections gauges TGCR
P.354
Pre-assembly tools cutting ring
assemblies
CRPT-M CRPT-PA CRCB-TYPE80 CRPT-MT CRCB
P.355 P.356 P.357 P.358 P.359
Pre-assembly tools BV-10 BV10PT/
BV10CJ
P.360
Pre-assembly tools ZAKO ZAKOPP/
ZAKOCJ
P.364
Pre-assembly tools ZAKO LP ZAKOPP/
ZAKOCJ
P.368
Pre-assembly tools VOSSForm SQRFH/
SQRCJ
P.369
Content Type/Page

329
6
- - L CRPT TD
Manual pre-assembly dies made of heavy-duty steel, for tube OD L35
System
Function/
Component
Form Completion
Series/
Thread
Tools and devices
System
Cutting ring pre-assembly tool
Function/Component
Form
Completion
Light series
Determines the series
Series/Thread
Example: TD-CRPT-L35-M-PM

330
- - 35 M-PM
Tube OD/
Diameter
Thread Diameter
Sealing type/
Threaded bore
Suffix
Manual pre-assembly mandrel heavy-duty steel
Suffix 10
Diameter
Thread
OD 35 mm
Tube OD/Diameter
using different cutting ring systems, flared coupling parts, special
dimensions )

331
6
System
TD Tools and devices
Function
Tools
BV-10
BV10CJ BV-10 Clamping jaws
BV10PT BV-10 Pre-assembly tools
Cutting rings
CRCB Cutting ring counter brackets
CRPT Cutting ring pre-assembly tools
SQR
SQRCJ SQR Clamping jaws
SQRFH SQR Forming heads
ZAKO
ZAKOCJ ZAKO Clamping jaws
ZAKOPP ZAKO Pressure plates
ZAKOSR ZAKO Spacer rings
Gauges
CG Cone gauges
TGCR Cutting ring testing gauges
TIB Thread identication board
Devices
TBM1 Tube bending manual no. 1
TYPE80N3 Pre-assembly device TYPE 80N3
TYPE85 Pre-assembly device TYPE 85
TYPE90B2 Pre-assembly device TYPE 90B2
TYPE90C2 Pre-assembly device TYPE 90 Comfort
TYPE100 Pre-assembly device TYPE 100
TYPE100C Pre-assembly device TYPE 100 Compact
DUHY1 Drive unit 1, hydraulic
(number consecutively)
YALE PY-07
FOOTSWITCH1 Footswitch 1 with protection cover
Wire Plug CA 3 LS
BV10A BV-10 Attachments
Series/Thread
Series
LL Extra light series
L Light series
S Heavy series
System
Function/
Component
Form Completion
Series/
Thread
Tube OD/
Diameter
Thread Diameter
Sealing type/
Threaded bore
Suffix

332
Tube OD/Diameter
6 6 mm
8 8 mm
10 10 mm
12 12 mm
14 14 mm
15 15 mm
16 16 mm
18 18 mm
20 20 mm
22 22 mm
25 25 mm
28 28 mm
30 30 mm
35 35 mm
38 38 mm
42 42 mm
48,3 48,3 mm
50 50 mm
60 60 mm
60,3 60,3 mm
65 65 mm
75 75 mm
76,1 76,1 mm
80 80 mm
88 88 mm
89,9 89,9 mm
101,6 101,6 mm
114,3 114,3 mm
1/2 1/2 inch
3/4 3/4 inch
1 1 inch
1 1/4 1 1/4 inch
Suffix overview
Suffix 10 Tool
Inner diameter
ID3 Inner diameter 3 mm

System
Function/
Component
Form Completion
Series/
Thread
Tube OD/
Diameter
Thread Diameter
Sealing type/
Threaded bore
Suffix

333
6
Suffix 10 Tool
BV10A BV-10 Attachments
DUHY1 Drive unit 1, hydraulic
YALE PY-07
M Manual pre-assembly mandrel
M-PM Manual pre-assembly mandrel heavy-duty steel
MT Mop-top
MT-RFID Mop-top with RFID
MT-PM-RFID Mop-top heavy-duty steel with RFID
PA Pin adapter
PA-PM Pin adapter heavy-duty steel
RR8 Reserve roll 8 mm
SST Stainless steel applications
TYPE82 pre-assembly device TYPE82
TYPE80 pre-assembly device TYPE80 (all generations)
TYPE85 pre-assembly device TYPE85
TYPE90B2 pre-assembly device TYPE90B2
TYPE90C2 pre-assembly device TYPE90C2 Comfort
System
Function/
Component
Form Completion
Series/
Thread
Tube OD/
Diameter
Thread Diameter
Sealing type/
Threaded bore
Suffix

334
One-off assembly
Series assembly
VOSS pre-assembly devices and tools are specially
designed for assembling tube couplings.
For every application, whether for one-off or series-produc-
tion assembly of cutting rings, VOSSForm
SQR
, BV-10 flared
cone rings or ZAKO rings, a variety of tools are available
from simple aids to automatically assembly-force-controlled
devices and the associated tool inserts.
The manual pre-assembly die is a simple but necessary
tool for manual pre-assembly of cutting rings.
The hardened pre-assembly die guarantees that the taper
cuts into the tube reliably without damaging the cone of the
actual coupling connecting piece.
For series-production assembly of cutting rings, BV-10
flared cones and ZAKO rings, a wide range of devices
ranging from portable hand-pump devices to permanently
installed, electrically operated pre-assembly devices for
outer tube diameters of 6 114.3 mm is available.
Product information VOSS pre-assembly devices and tools

335
6
We at VOSS, see ourselves not only as manufacturers
and suppliers of high-quality connecting components, but
also as system partners who guide and support you in the
entire field hydraulic tube connecting technology and help
your products to be a success all around the world. We
manufacture our own systems, operate our own in-house
electroplating plant, and can supply pre-assembly devices,
tools and auxiliary equipment for your operations. We
also offer training courses and audits to our customers.
Logistics is another important aspect for us only products
that are delivered to you reliably and on time can be used
dependably in your processes. Our aim: all tube couplings
must be absolutely reliable and safe. The use of VOSS
pre-assembly devices which are perfectly matched to the
applications and their outstanding, well-conceived features
play an essential role towards achieving this aim.
Reliability right down to the last detail

336
Safe and reliable pre-assembly and final assembly processes
Device designation Type 80 N3 Type 90 Basic II Type 90
Comfort
VOSSForm
100
VOSSForm 100
Compact
Type 85
One-off assembly X X
Series assembly X X X X
Automatic
tool recognition
X
Reverse stroke optimization X X X X
Semi-automatic tooling X X X
Touch screen X
Error detection X
Error prevention X X
Including calibration service X
Free parameter denition acc. to
customer requirements
X
Countdown workpiece counter X
Freely programmable workpiece
counter
X
Optional pedal switch X X X X
Tube OD 642 mm 642 mm 642 mm 642 mm 642 mm 38114.3 mm
Bench-top device X X X X X
Floor-mounted device X
Systems:
Cutting ring systems X X X
BV-10 ared cone system X X X
ZAKO ange system X X X X
VOSSForm
SQR
/ VOSSForm
SQR
VA X X
VFS 90 (ORFS)
Electrical connection 400 V 400 V 400 V 400 V 400 V
Dimensions (wxhxd) in mm 185x267x590 540x280x480 800x308x615 900x1122x943 800x951x480 340x320x650
Weight 15 kg 66 kg 90 kg 630 kg 380 kg 160 kg
Our pre-assembly devices and tools have been specially
designed for one-off and for series production and match
our entire coupling system right down to the last detail.
We offer appropriate solutions for all requirements safe
and economical pre-assembly for initial production and for
maintenance work. From simple manual assembly tools
right up to automatic devices with tool recognition, VOSS
offers a wide range of tools for tubes diameters between
6 and 114.3 mm.

337
6
Manual pre-assembly studs
For individual cutting ring assembly using a vise.
If a cutting ring has to be replaced on-site or during
servicing, a manual pre-assembly die should be used. This
allows a connection to be made without subjecting the
actual coupling connecting piece to wear.
for individual manual pre-assembly work
wear-resistant
Systems
Cutting rings 2S, 2S plus, 2SVA, ES-4, ES-4VA:
tube OD 6 mm 42 mm
Applications
On-site service work requiring a vise.
See page 355 for ordering information.
VOSS Type 80 N3
Also suitable for 10 flared coupling systems
Lots of tubing at a lot of different, difficult-to-access
places? The handy VOSS Type 80 N3 tool takes on any
service work challenge. Its extending side surfaces allow it
to be securely gripped in a vise or be bolted directly onto
the workbench. Tool sets are easily exchanged and the
pressure gauge, in conjunction with the settings printed on
the device, ensure precision assembly results. This is THE
portable field service device for pre-assembly work if no
electric mains power is available.
pressure gauge, table of settings
new: operating lever and mounting can be removed to
facilitate transportation
Systems
tube OD 6 mm 42 mm
BV-10: tube OD 6 mm 42 mm
ZAKO: tube OD up to 38 mm
Applications
Mobile device for maintenance and service work, easy
assembly, with mounting options.
Always prepared The star of the construction site

338
VOSS Type 90 Basic II
With automatic pre-assembly and workpiece counter
One shop floor, but multiple workplaces? The easily trans-
ported VOSS Type 90 Basic II ensures reliable series pre-
assembly of cutting ring couplings anywhere and every-
where with reproducible results. The automated pre-
assembly process ensures consistently good results and
the adjustable working pressure allows the pre-assembly
process to be adjusted to match varying assembly para-
meters. One especially practical feature: system-related
setting values are printed directly on the device casing.
These can be adjusted individually and are shown clearly
on a large display. The built-in count-down workpiece
counter makes sure that not a single tube too many or too
few is pre-assembled.
Weighs just 66 kg
Easy to operate, integrated workpiece counter, easy tool
change
Intelligent controls lead to short cycle times
Pedal switch available as an option
Systems
tube OD 6 mm 42 mm
BV-10 (machine conversion by VOSS service)
tube OD 6 mm 42 mm
ZAKO (machine conversion by VOSS service)
tube OD up to 38 mm
Applications
Bench-top device for shop-floor use, larger production runs
VOSS Type 90 Comfort
Automatic RFID tool recognition prevents errors and
lowers production costs
Pre-assembly work for large series production has its own
special requirements. Tools have to be exchanged quickly,
cycle times must be extremely short but not a single fault is
permitted since this might render an entire lot unusable.
The answer to such demands is the VOSS Type 90 Comfort.
This device reads the RFID chips integrated in the VOSS
tools and then adjusts parameters automatically to suit the
tool. In this way, the shortest tooling times possible can be
achieved, while effectively preventing operator errors even
when tools have to be exchanged often and fast. Simple,
precise, safe and reliable especially suitable for tight tube
bends.
Automatic pressure settings
Tool recognition via RFID chip
Programmable workpiece counter
Pre-assembly controlled in relation to tool travel
Touch-panel, intuitive menu guidance
Including on-site calibration service
Error detection
Systems
tube OD 6 mm 42 mm
BV-10 (machine conversion by VOSS service)
tube OD 6 mm 42 mm
ZAKO (machine conversion by VOSS service)
tube OD up to 38 mm
Applications
For series production on shop floors, offering maximum
process safety and reliability.
Serial reproducibility Maximum process reliability

339
6
Fast, perfect tube forming The space-saving alternative
VOSSForm 100
Large-series assembly of VOSSForm
SQR
couplings, safe
operation thanks to a stop plate.
Flaring tubes to obtain the VOSSForm
SQR
contour can be
carried out easily and reliably using the VOSSForm100.
The unmistakable markings on both tools minimize assem-
bly errors, and the stop plate for the tube end prevents
insertion errors. This ensures that there is always enough
tube material for shaping the contour and avoids rejects
right from the start. Operating errors are prevented by
automatic shaping pressure adjustment and by optical
indication of the next operating step. Once the tube has
been formed, the device returns to the start position under
optical gate control an ideal solution for fast-cycle mass
production. Another feature which helps to achieve this is
the design of the VOSSForm100 as a complete workplace
with an integrated magazine for easy-to-change tools and
an additional 230 V mains outlet on the back.
Automatic set-up to match tube size
Cycle times from 7 (6 10 mm OD) to 15 seconds
(25 42 mm OD)
Optical gate detects end of work step and causes
machine to return to start position
Ergonomical: tool magazine lock with single-handed
operation, extremely simple operation thanks to intuitive
concept
Systems
VOSSForm
SQR
and VOSSForm
SQR
VA: tube OD 6 mm 42 mm
Applications
Stationary device, series production, maximum process
safety and reliability
VOSSForm 100 Compact
Ready for fork-lift or crane transportation
VOSSForm100 Compact is an alternative to VOSSForm100
when smaller dimensions are required. This is a bench-top
machine which has been cleverly designed to provide all
the same advantages as the floor-standing version. The
device is 100% compatible to its big brother, since it has
an identical forming unit. This means that the tools can be
used for both the bench-top and the floor-standing machine.
Normal steel tubes and stainless steel tubes can be formed
equally well. In addition, the device has an integrated stop
plate that prevents wrong tube insertion. The intuitive
operating concept is user-friendly and easily mastered. The
compact model shows its advantages especially when it
comes to moving it around in the works: it has a special
attachment on the underside, specially designed for fork-
lift trucks, as well as sturdy lifting lugs at the top for crane
transport.
Compact bench-top version of Type 100
Same performance range and operating comfort
Systems
VOSSForm
SQR
and VOSSForm
SQR
VA: tube OD 6 mm 42 mm
Applications
Movable bench-top device, series production; maximum
process safety and reliability

340
VOSS Type 85
No wear and tear; protection against excessive flaring
Type 85 a compact electro-hydraulic machine is available
for pre-assembly mounting of rings for ZAKO flange
coup lings on tubes with outer diameters up to 114.3 mm.
Easy transportation is ensured by the two-part design:
separate pre-assembly cylinder plus assembly head, and
external hydraulic unit. Another advantage of this construc-
tion: the forming process can be visually monitored. The
actual ZAKO ring is used directly to flare the tube there
is no tool wear as the tool is turned into part of the
tube coup ling by the process. This means that the tube
does not have to be flared in advance. As the system is
so ex tremely simple, pre-assembly is very easy and great
accuracy is obtained.
Tool remains in the tube so that there is no tool wear
Simple operation
Complete assembly process can be monitored visually
Systems
ZAKO: tube OD 38 mm 114.3 mm
Applications
Can be transported, one-off and series production
Pre-assembly studs made of high performance steel
Tool service life extended by more than 20 times plus
built-in wear indicator
Two versions of the VOSS pre-assembly tools for cutting
rings are available: a basic version and a more sophisti-
cated version made of high performance steel. Normal
pre-assembly studs wear faster so that they have to be
checked using a gauge after every 50 pre-assembly ope-
rations. This is time-consuming, is a potential source of
faults and therefore means adhering to a tool test plan. Our
solution: durable tools made of high performance steel.
Typical tool wear no longer occurs, there are no test and
inspection intervals and the service life is very long up to
20 times that of conventional tools. When the die reaches
the usable tolerance limits, its front end breaks off, forcing
the user to replace it. This ensures fault-free processes in
your company.
Basic version: accuracy has to be checked using a
gauge after every 50 pre-assembly processes
High performance steel version: no inspection/checking
required, service life up to 20 times longer, clear
indication when service tolerance limit is reached
Also available as manual pre-assembly studs for use in a
vise
Version for Type 90 Comfort: contains an integrated
RFID chip as well
All tools have the same mounting and can be used in
any corresponding pre-assembly device
Optimum results that can be seen
with ZAKO
100 % fault-free cutting ring
assembly

341
6
Precise checking of gauge accuracy
VOSS Fluid taper gauges for
pre-assembly studs
Hardened pre-assembly studs for the coupling of cutting
rings are wear-resistant, thus achieving consistent pre-
assembly results. To maintain these results, the tools must
be checked at regular intervals, since they are nevertheless
subject to a certain degree of wear.
In addition to a visual inspection for damage or cracks, the
checks must also include verification of the die dimensions
using a gauge. This involves checking the internal conical
bore of the pre-assembly die after every 50 applications.
VOSS taper gauges are available individually or as a
complete set containing all sizes of the light-weight and
heavy duty versions in a practical plastic case.
Cutting ring geometry at a glance
VOSS Fluid taper gauges for
pre-assembly studs
VOSS supplies inspection gauges to check the results of
cutting ring pre-assembly and which can be used to evaluate
pre-assembly in conjunction with visual inspection of the
pushed-up tube material. To establish a permanently leak-tight
cutting ring coupling, the pre-assembled end of the tube must
contact the screw coupling connecting piece and the cutting
ring must be inserted securely into the 24 conical recess. A
closed force transmission path and the resulting safe connec-
tion can only be achieved by the interaction of this geometry
with a strong ring of raised tube material. The VOSS taper
gauge is used as an auxiliary device for evaluating cutting ring
pre-assemblies and summarizing the geometry situation in the
form of legible values.
Operating principle:
The results are checked by measuring the pre-assembled tube
end. This is done by pushing the tube end into the conical
opening of the taper gauge and screwing on the union nut
manually, hand-tight, without a spanner. The pointer of the
dial will move until the cutting ring cone is in contact with the
tapered hole in the gauge. The indicated value must be within
specified limits. If the value is below the specified range, the
assembly is probably faulty and the cutting ring is too near the
end of the tube. If the value is higher than the specified range,
it must be assumed that the cutting ring is too far from the end
of the tube.
Applications:
Series production of tubingIncoming goods
Inspection of preconfigured tubing
Caution!
se of the gauge does not eliminate the need to visually check
for excessive or too little pre-assembly pressures (by checking
the height of tube material pushed up by the first cutting ring
edge)

342
Prevent size confusion Reliable radii
VOSS thread gauge board to determine
threaded stud sizes
The VOSS thread gauge board facilitates the determination
of metric and imperial threaded stud sizes and prevents
mistakes during assembly
The similarity of some metric and imperial threads makes
it hard to distinguish between them. Further more, some
threads can even be screwed into tapped holes which have
been mistakenly assumed to have the correct thread. As
such mistakes can endanger workers and the environment,
we recommend that the cautionary notes in the respective
standards be observed.
The VOSS thread gauge board allows the threads to be
verified once more before the studs are used.
VOSS tube-bending equipment
Light-weight manual bending device, vise-mounting, for
accurate bending of tubes with ODs of 8 mm 22 mm.
For tubes with outer diameters of 8, 10,12, 14, 16, 18,
20 and 22 mm
Including a sturdy metal case
Degree graduation marks on the bending templates
make accurate bending of tubes easier
Highly suitable for on-site use as the device can be
simply held in a vise.

343
6
Type 80 N3
Manual pump pre-assembly device
Type Order designation
For manual pre-assembly of cutting rings on tubes with OD
642mm, and for manual pre-assembly of flared cones and ZAKO
rings up to 1 1/4".
Dimensions
Width: 190 mm
Height: 267 mm
Depth: 590 mm
Weight: 15 kg
TD-TYPE80N3

344
Type 90 Basic II
Device for electrical mains power
400 V / 50Hz / 3 Ph
For machine-assisted pre-assembly of cutting rings on tubes with OD
6 42 mm, and for machine-assisted pre-assembly of flared cones
and ZAKO rings, by means of a conversion kit (not part of standard
delivery package).
Dimensions
Width: 681 mm
Height: 260 mm
Depth: 520 mm
Weight: 66 kg
Noise level: 60 dBA
TD-TYPE90B2
Conversion kit TD-BV10A-TYPE90B2
Other power supply ratings upon request.

345
6
Type 90 Comfort
400 V / 50Hz / 3 Ph
For machine-assisted pre-assembly of cutting rings on tubes with OD
6 - 42 mm, and for machine-assisted pre-assembly of flared cones
and ZAKO rings, by means of a conversion kit (not part of standard
delivery package).
Dimensions
Width: 800 mm
Height: 308 mm
Depth: 615 mm
Depth (with conversion kit): 636 mm
Weight: 90 kg
Noise level: 70 dBA
TD-TYPE90C2
Conversion kit TD-BV10A-TYPE90C2


346
Type 85
400 V 16 A AC
3 Ph / N / PE / 50 Hz / 0.75 kW
For machine-assisted pre-assembly of ZAKO rings for tubes with outer
diameters 38mm 114.3 mm incl. drive unit and high-pressure hose.
TD-TYPE85-DUHY1
Pre-assembly cylinder Type 85 without drive unit.
Device for connection to a drive unit.
P
A
= max. 700 bar
V = min 3l
with hydraulic plug coupling
(NW 10 coupling sleeve YALE CFY-10-10).
Dimensions
Width: 340 mm
Height: 320 mm
Depth: 650 mm
Weight: 160 kg
TD-TYPE85
Drive unit
(Electric hydraulic power pack YALE PY-07).
TD-DUHY1

347
6
VOSSForm 100
Forming machine for electrical mains power supply
400 V 16 A AC
3Ph / N / PE 50 Hz / 4 kW
For machine-assisted forming of the VOSSForm
SQR
contour on steel
and stainless steel tubes with ODs 6 42 mm.
5-pin CEE plug
Dimensions
Width: 900 mm
Height: 1122 mm
Depth: 943 mm
Weight: 630 kg
Noise level: < 74 dBA
TD-TYPE100
Forming machines

348
Forming machine for electrical mains power supply
400 V 16 A AC
3Ph / N / PE 50 Hz / 3 kW
For machine-assisted forming of the VOSSForm
SQR
contour on steel
and stainless steel tubes with OD 6 42 mm.
5-pin CEE plug
Dimensions
Width: 800 mm
Height: 480 mm
Depth: 951 mm
Weight: 380 kg
Noise level: < 74 dBA
TD-TYPE100C
Forming machines

349
6
Foot switch for pre-assembly
devices
Connector: CA 3 LS
Protection class: IP65
Safety foot switch with accident-prevention hood and safety
interlock.
For operating pre-assembly devices:
Typ 90 Basic II
Typ 90 Comfort
VOSSForm 100
Min. cable length 3 m
Dimensions
Width: 156 mm
Height: 146 mm
Depth: 250 mm
TD-FOOTSWITCH1

350
Tube bending device
Mobile manual unit for producing precision tube bends
Tube bending device for manual precision bending of tubes. Can be
used to bend tubes with OD of 8 to 22 mm.
The delivery package includes the following 9 bending templates:
TD-TBM1
Tube OD Order designation
8 TD-TBM1-RR8
10 TD-TBM1-RR10
12 TD-TBM1-RR12
14 TD-TBM1-RR14
15 TD-TBM1-RR15
16 TD-TBM1-RR16
18 TD-TBM1-RR18
20 TD-TBM1-RR20
22 TD-TBM1-RR22

351
6
Thread gauge board
For determining thread sizes of threaded studs
Can be used to determine following thread sizes:
Metric fine thread, parallel
M 10 x 1 M 48 x 2
Inch-size Whitworth pipe thread, parallel
G 1/8" G 1 1/2"
TD-TIB

352
Cone gauges for pre-assembly studs
For checking the 24 cone of a stud
Series
Tube OD
Order designation
L 6 TD-CG-L/S6
L 8 TD-CG-L/S8
L 10 TD-CG-L/S10
L 12 TD-CG-L/S12
L 15 TD-CG-L15
L 18 TD-CG-L18
L 22 TD-CG-L22
L 28 TD-CG-L28
L 35 TD-CG-L35
L 42 TD-CG-L42
S 6 TD-CG-L/S6
S 8 TD-CG-L/S8
S 10 TD-CG-L/S10
S 12 TD-CG-L/S12
S 14 TD-CG-S14
S 16 TD-CG-S16
S 20 TD-CG-S20
S 25 TD-CG-S25
S 30 TD-CG-S30
S 38 TD-CG-S38

353
6
Inspection gauges
For inspection of cutting ring pre-assemblies
Including union nut and test pin in a handy suitcase
Series
Tube OD
Order designation
LL 16 TD-TGCR-LL16
L 6 TD-TGCR-L6
L 8 TD-TGCR-L8
L 10 TD-TGCR-L10
L 12 TD-TGCR-L12
L 15 TD-TGCR-L15
L 18 TD-TGCR-L18
L 22 TD-TGCR-L22
L 28 TD-TGCR-L28
L 35 TD-TGCR-L35
L 42 TD-TGCR-L42
S 6 TD-TGCR-S6
S 8 TD-TGCR-S8
S 10 TD-TGCR-S10
S 12 TD-TGCR-S12
S 14 TD-TGCR-S14
S 16 TD-TGCR-S16
S 20 TD-TGCR-S20
S 25 TD-TGCR-S25
S 30 TD-TGCR-S30
S 38 TD-TGCR-S38

354
Pre-assembly tools
for cutting ring assemblies
Manual pre-assembly stud
Series
Tube OD
d1
d3 SW1 Order designation
Standard
Order designation
High-performance steel
LL 4 M 8 x 1 7 TD-CRPT-LL4-M TD-CRPT-LL4-M-PM
L 6 M 12 x 1.5 11 TD-CRPT-L6-M TD-CRPT-L6-M-PM
L 22 M 30 x 2 27 TD-CRPT-L22-M TD-CRPT-L22-M-PM
S 6 M 14 x 1.5 12 TD-CRPT-S6-M TD-CRPT-S6-M-PM
S 20 M 30 x 2 27 TD-CRPT-S20-M TD-CRPT-S20-M-PM

355
6
Pre-assembly tools
Type 80 N2
Pre-assembly stud
Series
Tube OD
d1
Order designation
Pre-assembly stud
Standard
Order designation
Pre-assembly stud
LL 6 TD-CRPT-LL6-PA
LL 8 TD-CRPT-LL8-PA
L 6 TD-CRPT-L6-PA TD-CRPT-L6-PA-PM
S 6 TD-CRPT-S6-PA TD-CRPT-S6-PA-PM

356
Pre-assembly tools
Type 80 N2 / N3
Support plate
Series
Tube OD
d1
Order designation
Support plate
Type 80 N2 / N3
LL 6 TD-CRCB-L/S6-TYPE80
LL 8 TD-CRCB-L/S8-TYPE80
L 6 TD-CRCB-L/S6-TYPE80
L 15 TD-CRCB-L15-TYPE80
S 6 TD-CRCB-L/S6-TYPE80
S 14 TD-CRCB-S14-TYPE80

357
6
Pre-assembly tools
Type 80 N3
Type 90 Basic II
Type 90 Comfort
Pre-assembly stud
Series
Tube OD
d1
Order designation
Pre-assembly stud
Standard
Order designation
Pre-assembly stud
Standard
with RFID (Type 90 Comfort)
Order designation
Pre-assembly stud
Order designation
Pre-assembly stud
with RFID (Type 90 Comfort)
LL 6 TD-CRPT-LL6-MT TD-CRPT-LL6-MT-PM TD-CRPT-LL6-MT-PM-RFID
LL 8 TD-CRPT-LL8-MT TD-CRPT-LL8-MT-PM TD-CRPT-LL8-MT-PM-RFID
L 6 TD-CRPT-L6-MT TD-CRPT-L6-MT-RFID TD-CRPT-L6-MT-PM TD-CRPT-L6-MT-PM-RFID
S 6 TD-CRPT-S6-MT TD-CRPT-S6-MT-RFID TD-CRPT-S6-MT-PM TD-CRPT-S6-MT-PM-RFID

358
Pre-assembly tools
Type 90 Basic II
Type 90 Comfort
Support plate
Series
Tube OD
d1
Order designation
Support plate
LL 6 TD-CRCB-L/S6
LL 8 TD-CRCB-L/S8
L 6 TD-CRCB-L/S6
L 8 TD-CRCB-L/S8
L 10 TD-CRCB-L/S10
L 12 TD-CRCB-L/S12
L 15 TD-CRCB-L15
L 18 TD-CRCB-L18
L 22 TD-CRCB-L22
L 28 TD-CRCB-L28
L 35 TD-CRCB-L35
L 42 TD-CRCB-L42
S 6 TD-CRCB-L/S6
S 8 TD-CRCB-L/S8
S 10 TD-CRCB-L/S10
S 12 TD-CRCB-L/S12
S 14 TD-CRCB-S14
S 16 TD-CRCB-S16
S 20 TD-CRCB-S20
S 25 TD-CRCB-S25
S 30 TD-CRCB-S30
S 38 TD-CRCB-S38

359
6
Pre-assembly tools
for BV-10 flared coned assembly
Type 80 N
Type 80 N2
Series
Tube OD
d1 x s
d3 Order designation
Pre-assembly stud
Order designation
Clamping jaws
L 6 x 1 2.9 TD-BV10PT-L6x1-PA TD-BV10CJ-L/S6
L 10 x 1.5 5.5 TD-BV10PT-L/S10x1.5-PA TD-BV10CJ-L/S10
L 12 x 1.5 7.5 TD-BV10PT-L/S12x1.5-PA TD-BV10CJ-L/S12
L 15 x 1.5 10.2 TD-BV10PT-L15x1.5-PA TD-BV10CJ-L15
L 15 x 2 9.1 TD-BV10PT-L15x2-PA TD-BV10CJ-L15
L 18 x 1.5 13.0 TD-BV10PT-L18x1.5-PA TD-BV10CJ-L18
L 22 x 1.5 16.2 TD-BV10PT-L22x1.5/22x2-PA TD-BV10CJ-L22
L 22 x 2 16.2 TD-BV10PT-L22x1.5/22x2-PA TD-BV10CJ-L22
L 28 x 2 21.0 TD-BV10PT-L28x2/28x2.5-PA TD-BV10CJ-L28
L 28 x 2.5 21.0 TD-BV10PT-L28x2/28x2.5-PA TD-BV10CJ-L28
L 35 x 3 26.5 TD-BV10PT-L35x3/35x3.5-PA TD-BV10CJ-L35
L 35 x 3.5 26.5 TD-BV10PT-L35x3/35x3.5-PA TD-BV10CJ-L35
Locking plate available upon request.

360
Pre-assembly tools
Type 80 N
Type 80 N2
Series
Tube OD
d1 x s
Pre-assembly stud
Order designation
Clamping jaws
S 8 x 1.5 4 TD-BV10PT-S8x1.5-PA TD-BV10CJ-L/S8
S 8 x 2 3 TD-BV10PT-S8x2-PA TD-BV10CJ-L/S8
S 10 x 1.5 5.5 TD-BV10PT-L/S10x1.5-PA TD-BV10CJ-L/S10
S 10 x 2 4.5 TD-BV10PT-S10x2/12x3-PA TD-BV10CJ-L/S10
S 12 x 1.5 7.5 TD-BV10PT-L/S12x1.5-PA TD-BV10CJ-L/S12
S 12 x 2 6.5 TD-BV10PT-S12x2-PA TD-BV10CJ-L/S12
S 12 x 3 4.5 TD-BV10PT-S10x2/12x3-PA TD-BV10CJ-L/S12
S 14 x 2 8.5 TD-BV10PT-S14x2/16x3-PA TD-BV10CJ-S14
S 14 x 3 6 TD-BV10PT-S14x3-PA TD-BV10CJ-S14
S 16 x 2 10.5 TD-BV10PT-S16x2-PA TD-BV10CJ-S16
S 16 x 2.5 9.5 TD-BV10PT-S16x2.5-PA TD-BV10CJ-S16
S 16 x 3 8.5 TD-BV10PT-S14x2/16x3-PA TD-BV10CJ-S16
S 20 x 2 13.5 TD-BV10PT-S20x2/20x2.5-PA TD-BV10CJ-S20
S 20 x 2.5 13.5 TD-BV10PT-S20x2/20x2.5-PA TD-BV10CJ-S20
S 20 x 3 12.5 TD-BV10PT-S20x3-PA TD-BV10CJ-S20
S 20 x 3.5 11 TD-BV10PT-S20x3.5-PA TD-BV10CJ-S20
S 25 x 2.5 18 TD-BV10PT-S25x2.5-PA TD-BV10CJ-S25
S 25 x 3 17 TD-BV10PT-S25x3/30x5-PA TD-BV10CJ-S25
S 30 x 5 17 TD-BV10PT-S25x3/30x5-PA TD-BV10CJ-S30

361
6
Pre-assembly tools
Type 80 N3
Type 90 Basic II
Type 90 Comfort
Series
Tube OD
d1 x s
Pre-assembly stud
Order designation
Clamping jaws
L 6 x 1 2.9 TD-BV10PT-L6x1-MT TD-BV10CJ-L/S6
L 10 x 1.5 5.5 TD-BV10PT-L/S10x1.5-MT TD-BV10CJ-L/S10
L 12 x 1.5 7.5 TD-BV10PT-L/S12x1.5-MT TD-BV10CJ-L/S12
L 15 x 1.5 10.2 TD-BV10PT-L15x1.5-MT TD-BV10CJ-L15
L 15 x 2 9.1 TD-BV10PT-L15x2-MT TD-BV10CJ-L15
L 18 x 1.5 13.0 TD-BV10PT-L18x1.5-MT TD-BV10CJ-L18
L 22 x 1.5 16.2 TD-BV10PT-L22x1.5/22x2-MT TD-BV10CJ-L22
L 22 x 2 16.2 TD-BV10PT-L22x1.5/22x2-MT TD-BV10CJ-L22
L 28 x 2 21.0 TD-BV10PT-L28x2/28x2.5-MT TD-BV10CJ-L28
L 28 x 2.5 21.0 TD-BV10PT-L28x2/28x2.5-MT TD-BV10CJ-L28
L 35 x 3 26.5 TD-BV10PT-L35x3/35x3.5-MT TD-BV10CJ-L35
L 35 x 3.5 26.5 TD-BV10PT-L35x3/35x3.5-MT TD-BV10CJ-L35

362
Pre-assembly tools
Type 80 N3
Type 90 Basic II
Type 90 Comfort
Series
Tube OD
d1 x s
Pre-assembly stud
Order designation
Clamping jaws
S 8 x 1.5 4 TD-BV10PT-S8x1.5-MT TD-BV10CJ-L/S8
S 8 x 2 3 TD-BV10PT-S8x2-MT TD-BV10CJ-L/S8
S 10 x 1.5 5.5 TD-BV10PT-L/S10x1.5-MT TD-BV10CJ-L/S10
S 10 x 2 4.5 TD-BV10PT-S10x2/12x3-MT TD-BV10CJ-L/S10
S 12 x 1.5 7.5 TD-BV10PT-L/S12x1.5-MT TD-BV10CJ-L/S12
S 12 x 2 6.5 TD-BV10PT-S12x2-MT TD-BV10CJ-L/S12
S 12 x 3 4.5 TD-BV10PT-S10x2/12x3-MT TD-BV10CJ-L/S12
S 14 x 2 8.5 TD-BV10PT-S14x2/16x3-MT TD-BV10CJ-S14
S 14 x 3 6 TD-BV10PT-S14x3-MT TD-BV10CJ-S14
S 16 x 2 10.5 TD-BV10PT-S16x2-MT TD-BV10CJ-S16
S 16 x 2.5 9.5 TD-BV10PT-S16x2.5-MT TD-BV10CJ-S16
S 16 x 3 8.5 TD-BV10PT-S14x2/16x3-MT TD-BV10CJ-S16
S 20 x 2 13.5 TD-BV10PT-S20x2/20x2.5-MT TD-BV10CJ-S20
S 20 x 2.5 13.5 TD-BV10PT-S20x2/20x2.5-MT TD-BV10CJ-S20
S 20 x 3 12.5 TD-BV10PT-S20x3-MT TD-BV10CJ-S20
S 20 x 3.5 11 TD-BV10PT-S20x3.5-MT TD-BV10CJ-S20
S 25 x 2.5 18 TD-BV10PT-S25x2.5-MT TD-BV10CJ-S25
S 25 x 3 17 TD-BV10PT-S25x3/30x5-MT TD-BV10CJ-S25
S 30 x 5 17 TD-BV10PT-S25x3/30x5-MT TD-BV10CJ-S30

363
6
Pre-assembly tools
for ZAKO ring assembly
Type 80 N
Type 80 N2
Flange size
NW
Pre-assembly stud
Tube OD
d1
Order designation
Clamping jaws
1/2 30.3 TD-ZAKOPP-1/2-PA 16 TD-BV10CJ-S16
3/4 38.3 TD-ZAKOPP-3/4-PA 20 TD-BV10CJ-S20
1 46.3 TD-ZAKOPP-1-PA 25 TD-BV10CJ-S25
1 1/4 52.3 TD-ZAKOPP-11/4-PA 30 TD-BV10CJ-S30
38 TD-BV10CJ-S38

364
Pre-assembly tools
for ZAKO ring assembly
Type 80 N3
Type 90 Basic II
Type 90 Comfort
Flange size
NW
Pre-assembly stud
Tube OD
d1
Order designation
Clamping jaws
1/2 30.3 TD-ZAKOPP-1/2-MT 16 TD-BV10CJ-S16
3/4 38.3 TD-ZAKOPP-3/4-MT 20 TD-BV10CJ-S20
1 46.3 TD-ZAKOPP-1-MT 25 TD-BV10CJ-S25
1 1/4 52.3 TD-ZAKOPP-11/4-MT 30 TD-BV10CJ-S30
38 TD-BV10CJ-S38

365
6
Pre-assembly
tools for
ZAKO ring
assembly
Typ 82
Clamping jaws
Order designation
Clamping jaws
Order designation
Spacer ring
Order designation
Pressure plate
16 TD-ZAKOCJ-16-TYPE82 TD-ZAKOSR-TYPE82 TD-ZAKOPP-16-65-TYPE82
20 TD-ZAKOCJ-20-TYPE82 TD-ZAKOSR-TYPE82 TD-ZAKOPP-16-65-TYPE82
25 TD-ZAKOCJ-25-TYPE82 TD-ZAKOPP-16-65-TYPE82

366
Pre-assembly
tools for
ZAKO ring
assembly
Type 85
Clamping jaws
Order designation
Clamping jaws
Order designation
Spacer ring
Order designation
Pressure plate
38 TD-ZAKOCJ-38-TYPE85 TD-ZAKOSR-TYPE85 TD-ZAKOPP-38-TYPE85
50 TD-ZAKOCJ-50-TYPE85 TD-ZAKOSR-TYPE85 TD-ZAKOPP-48.3/50-TYPE85
75 TD-ZAKOCJ-75-TYPE85 TD-ZAKOPP-75-TYPE85
80 TD-ZAKOCJ-80-TYPE85 TD-ZAKOPP-76.1/80-TYPE85
88 TD-ZAKOCJ-88-TYPE85 TD-ZAKOPP-88-TYPE85
101.6 TD-ZAKOCJ-101,6-TYPE85 TD-ZAKOPP-88.9/101.6-TYPE85
114.3 TD-ZAKOCJ-114,3-TYPE85 TD-ZAKOPP-114.3-TYPE85

367
6
Pre-assembly
tools for
ZAKO LP ring
assembly
Type 85
Flange size
NW
Clamping jaws
Order designation
Clamping jaws
Order designation
Spacer ring
Order designation
Pressure plate
1 1/2 48.3 TD-ZAKOCJ-48.3-TYPE85 TD-ZAKOSR-TYPE85 TD-ZAKOPP-48.3/50-TYPE85
2 60.3 TD-ZAKOCJ-60.3-TYPE85 TD-ZAKOSR-TYPE85 TD-ZAKOPP-60.3-ID72.5-TYPE85
2 1/2 60.3 TD-ZAKOCJ-60.3-TYPE85 TD-ZAKOSR-TYPE85 TD-ZAKOPP-60.3-ID85.5-TYPE85
3 76.1 TD-ZAKOCJ-76.1-TYPE85 TD-ZAKOPP-76.1/80-TYPE85
3 1/2 88.9 TD-ZAKOCJ-88.9-TYPE85 TD-ZAKOPP-88.9/101.6-TYPE85
4 114.3 TD-ZAKOCJ-114.3-TYPE85 TD-ZAKOPP-114.3-ID150.5-TYPE85

368
Pre-assembly tools VOSSForm
SQR
(steel)
Type 100 / Type 100 Compact
Forming head
Clamping jaws
L/S 6 x 1 TD-SQRFH-L/S6x1 L/S 6 TD-SQRCJ-L/S6
L/S 6 x 1.5 TD-SQRFH-L/S6x1.5 L/S 8 TD-SQRCJ-L/S8
L/S 8 x 1.5 TD-SQRFH-L/S8x1.5 L 15 TD-SQRCJ-L15
L/S 8 x 2 TD-SQRFH-L/S8x2 L 18 TD-SQRCJ-L18
L/S 8 x 2.5 TD-SQRFH-L/S8x2.5 L 22 TD-SQRCJ-L22
L 10 x 1 TD-SQRFH-L10x1 L 28 TD-SQRCJ-L28
L 10 x 1.5 TD-SQRFH-L10x1.5 L 35 TD-SQRCJ-L35
L 10 x 2 TD-SQRFH-L10x2 L 42 TD-SQRCJ-L42
L 12 x 1 TD-SQRFH-L12x1 S 14 TD-SQRCJ-S14
L 12 x 1.5 TD-SQRFH-L12x1.5 S 16 TD-SQRCJ-S16
L 18 x 1.5 TD-SQRFH-L18x1.5
L 18 x 2 TD-SQRFH-L18x2

369
6
SQR
(steel)
Clamping jaws
S 10 x 1.5 TD-SQRFH-S10x1.5
S 10 x 2 TD-SQRFH-S10x2

370
SQR
(steel)
Clamping jaws

371
6
SQR
VA
(stainless steel)
Forming head
Clamping jaws
L/S 6 x 1 TD-SQRFH-L/S6x1-SST L/S 6 TD-SQRCJ-L/S6
L/S 6 x 1.5 TD-SQRFH-L/S6x1.5-SST L/S 8 TD-SQRCJ-L/S8
L/S 8 x 1.5 TD-SQRFH-L/S8x1.5-SST L 15 TD-SQRCJ-L15
L/S 8 x 2 TD-SQRFH-L/S8x2-SST L 18 TD-SQRCJ-L18
L/S 8 x 2.5 TD-SQRFH-L/S8x2.5-SST L 22 TD-SQRCJ-L22
L 10 x 1 TD-SQRFH-L10x1-SST L 28 TD-SQRCJ-L28
L 10 x 1.5 TD-SQRFH-L10x1.5-SST L 35 TD-SQRCJ-L35
L 10 x 2 TD-SQRFH-L10x2-SST L 42 TD-SQRCJ-L42
L 12 x 1 TD-SQRFH-L12x1-SST S 14 TD-SQRCJ-S14
L 12 x 1.5 TD-SQRFH-L12x1.5-SST S 16 TD-SQRCJ-S16
L 18 x 1.5 TD-SQRFH-L18x1.5-SST
L 18 x 2 TD-SQRFH-L18x2-SST
L 28 x 2.5 D-SQRFH-L28x2.5-SST

372
SQR
VA
(stainless steel)
Forming head
S 10 x 1.5 TD-SQRFH-S10x1.5-SST
S 10 x 2 TD-SQRFH-S10x2-SST

373
6

375
7
Important notes on VOSS
assembly instructions
P.380
Assembly instructions for 2S tube
couplings
P.382
Assembly instructions for 2SVA
tube couplings
P.387
Assembly instructions for 2S plus
tube couplings
P.392
Assembly instructions for ES-4
tube couplings
P.397
Assembly instructions for ES-4VA
tube couplings
P.402
Assembly instructions for
VOSSForm
SQR
tube couplings
P.407
Content Type/Page

376
VOSSForm
SQR
VA tube couplings
P.413
Assembly instructions for BV-10
flared couplings
P.419
Assembly instructions for taper
(DKO) and weld nipple
P.424
Assembly instructions for flange
couplings / ZAKO / ZAKO LP
P.428
Assembly instructions for flange
couplings with cutting ring
connection
P.435
adjustable couplings as specified
in ISO 6149 / 11926-1
P.438
adjustable elbow couplings with
lock nut
P.440
Content Type/Page

377
7
Assembly instructions for 37 flare
adapters
P.442
Assembly instructions for tube
blanking screws sealed with
PEFLEX moulded seal rings
P.448
Content Type/Page

378
Important notes on VOSS assembly instructions
In order to ensure maximum performance and functional reliability
of VOSS products, the respective assembly instructions, operating
conditions and tube recommendations have to be adhered to.
We recommend that you use VOSS pre-assembly devices at all
times. It is absolutely essential to follow the operating instructions
for the respective pre-assembly device used.
Do not start with assembly until you are absolutely sure that you
have understood the operating and assembly instructions for each
VOSS pre-assembly device or machine, tool and product. Incorrect
handling leads to risks regarding safety and leak-tightness and can
result in failure of the entire connection.
It is impossible for the manufacturer to monitor whether the user is
adhering to the operating and assembly instructions for individual
pre-assembly devices or machines, tools and products, as well as
what conditions prevail and what methods are used for installation,
operation, application and maintenance of the individual products.
Improper workmanship can lead to material damage, which in turn
may pose a danger to life and limb. This means that VOSS Fluid
GmbH can accept no responsibility or liability for loss, damage or
costs incurred due to faulty installation, improper operation or inco-
rrect application and maintenance or from any related issue. Failure
to heed this warning will lead to loss of guarantee.
VOSS Fluid GmbH reserves the right to make changes or additions
to the information provided without prior notification. Customers can
obtain the latest version of the operating and assembly instructions
upon request, or from our download area at: www.voss.net

380
General notes on VOSS assembly instructions
Determining the tightening torque for screw couplings
Explanation of symbols and other notes
Make sure that all components, including the tubes, are clean
before assembly is started and that they remain clean during the
entire assembly process. Soiled components may lead to failure of
the system.
Before starting assembly, make sure that you have carried out all
preparatory work in accordance with the respective instructions.
Specifications concerning permissible steel tubes:
seamless, cold-drawn and normalized precision steel tubes as
specified in DIN EN 10305-4, material E235+N, mat. no. 1.0308+N
or E355, mat. no. 1.0580. The tubes must be ordered by specifying
the outer diameter and the inner diameter.
Specifications concerning permissible stainless steel tubes:
seamless, cold-drawn and solution-annealed, scale-free stainless
steel tubes in CFA or CFD delivery condition of dimensions and
tolerances according to DIN EN 10305-1 and all other delivery
conditions as specified in DIN EN 10216-5, material
X6CrNiMoTi17-12-2, mat. no. 1.4571. The tubes must be ordered
by specifying the outer diameter and the inner diameter.
The tightening torques specified in the catalogue apply under the
following conditions:
n steel fittings with VOSS coat surface coating
n the specified nominal pressure ranges assume that the mating
material has a tensile strength of 600 N/mm
n our recommendations on lubrication of the threaded studs are
observed
The tubes should be prepared with the same thoroughness as pre-
assembly and final assembly of the connection. Especially when
using long tubes, check the end sections for damage or distortion.
We recommend that pre-assembled tubes which are not to be
finally assembled yet should be fitted with protective caps.
Marking a stroke on the union nut and the tube makes it easier to
achieve the correct number of turns when tightening the coupling.
Before starting to assemble VOSS components with elastomer
seals, always check that:
n the nut and the seal surfaces are clean and undamaged and/or
n the elastomer sealing is clean and undamaged
If other values for strength, modulus of elasticity and friction-surface
combinations are used, the user has to adapt the tightening torque
empirically.
The recommended tightening torques have to be adhered to if the
pressure range is to be fully utilized and the appropriate safety level
is to be maintained.
The recommended tightening torques for the threads are given in
the tables for the respective type of thread.
All dimensions in millimetres [mm]
Visual inspection
Use the tool to tighten the coupling according to the
instructions
Turn until hand-tight or carry out another manual activity
Oil and lubricate at the point marked with an arrow

381
7
L
H
1
2
Assembly instructions for 2S tube couplings
Notes
Before starting the assembly work, read the general
notes in the latest VOSS catalogue and check that your
assembly instructions are up to date.
These assembly instructions describe the possible
assembly options provided for in the German standard
DIN 3859 Part 2.
We recommend that VOSS pre-assembly devices and
tools are used for assembly at all times.
Attention!
Please note the recommendation on the use of tube
supports for thin-walled steel tubes and soft tubes made
of non-ferrous metals.
Tube preparation
2.1 The minimum dimensions of the straight tube ends
must be taken into account for determining the tube
lengths.
Series Tube OD [mm] H [mm] L [mm]
L 6 / 8 31 39
L 10 / 12 33 42
L 15 36 45
L 18 38 48
L 22 / 28 42 53
L 35 / 42 48 60
S 6 / 8 35 44
S 10 / 12 37 47
S 14 / 16 43 54
S 20 50 63
S 25 54 68
S 30 58 72
S 38 65 82
With machine pre-assembly, the minimum lengths are
contained in the respective operating instructions of the

382
-0,2
2.2 Saw tube off at right angles. An angle tolerance of
1 is permissible. Do not use a rotary grinder or tube
cutter.
2.3 Slightly deburr tube ends inside and outside. Clean
the tubes.
Attention!
Tubes cut crooked or improperly deburred reduce the
service life and freedom from leaks of the connection.
2.4 Assembly of VOSS reinforcing sleeves
1. Lubricate all around the outside of the sleeve slightly
(e.g. using mineral-oil based hydraulic fluid HLP32).
Then insert the sleeve into the tube up to the knurled
section.
2. Use a hammer (plastic or hard rubber) to drive the
sleeve in totally. In doing so, the knurled section is
pressed against the inner wall of the tube and pre-
vents the sleeve from being displaced or falling out.
Series
Tube OD
[mm]
Wall thickness [mm]
0.5 0.75 1 1.5 2 2.5 3
L 6
L 8
L 10
L 12
L 15
L 18
L 22
L 28
L 35
L 42
S 6
S 8
S 10
S 12
S 14
S 16
S 20
S 25
S 30
S 38
Sleeve driven in firmly
max. 1
Sleeve inserted

383
7
3
4
Assembly preparation
3.1 Lubricate the thread, the cutting ring, the tube end
and the taper of the coupling connecting piece and/or of
the manual pre-assembly stud lightly (e.g. using mineral-
oil based hydraulic fluid HLP32).
3.2 Put the union nut and the 2S cutting ring onto the
tube end, consecutively. The cutting edges of the 2S
cutting ring face the tube end.
Attention!
Make sure that the 2S cutting ring is in the right position.
VOSS 2S cutting rings can be pre-assembled directly in
the coupling connecting piece or using a hardened pre-
assembly stud.
Hardened pre-assembly dies are wear-resistant, thus
achieving consistent pre-assembly results. They have to
be checked after approx, every 50 pre-assemblies for
trueness of gauge.
Attention!
Pre-assembly studs that are not true to gauge or that
are damaged in the tapered section must be replaced
on all accounts. When mounting these directly in the
coupling connecting piece, this may be used only once
for pre-assembly.
All specified assembly distances and number of turns
must be adhered to. Otherwise there is a danger that
the coupling will leak or that the tube will tear out of the
coupling.
4.1 Insert the tube end into the 24 taper as far as it will
go and press on it. The tube must be held in as far as
it will go during the entire assembly process in order to
avoid faulty assembly.
4.2 Turn the union nut until it is hand-tight.

384
5
4.3 Use a spanner to tighten the union nut.
up to tube OD 18 mm:
1 1/2 turns
from tube OD 20 mm:
1 1/4 turns
Notes:
For assembly within the tube, tighten the coupling
connecting piece with a spanner. To comply with the
specified number of turns, it is recommended that
marking lines be applied to the union nut and the tube.
Check results
Unscrew the union nut and check the shoulder throw-
up. The shoulder throw-up must cover at least 80% of
the cutting-edge front face.
In this position, it is still permissible for the cutting ring to
turn on the tube. Any dirt must be removed.
Attention!
If not enough tube material has been raised, the proce-
dure must be repeated by using more force. The result
must be rechecked.
Note:
We recommend the use of the VOSS gauge to check
the correct axial position of the cutting ring.
Approx. 80 % material raised
up to tube OD 18 mm: 1 1/2 turns
from tube OD 20 mm: 1 1/4 turns
up to tube OD 18 mm: 1 1/2 turns
from tube OD 20 mm: 1 1/4 turns

385
7
7
6
Repeated assembly
For repeated assembly, the union nut must be tightened
using the same force as for the original assembly.
approx. 1/4 turn
approx. 1/4 turn
Final assembly
6.1 Lubricate the thread, the pre-assembled tube end
and the taper of the coupling connecting piece lightly
6.2 Insert the pre-assembled tube end carefully into the
coupling connecting piece. Then turn the union nut until
it is hand-tight.
Attention!
If the cutting ring was pre-assembled in the coupling
connecting piece, the same coupling connecting piece
used to pre-assemble the tube and cutting ring must be
used again for the final assembly.
6.3 Use a spanner to tighten the union nut until there is
a noticeable force increase.
6.4 Tighten up further by approximately 1/4 turn.
Attention!
When finally tightening up the coupling connecting piece,
always hold it in a spanner or clamp it in a vise.

386
L
H
1
2
Assembly instructions for 2SVA tube couplings
Notes
assembly instructions are up to date
VOSS 2SVA cutting rings have to be pre-assembled in
hardened tools.
These assembly instructions describe the pre-assembly
in hardened pre-assembly studs.
Attention!
supports made of material 1.4571 for thin-walled steel
tubes.
Tube preparation
lengths.
L 6 / 8 31 39
L 10 / 12 33 42
L 15 36 45
L 18 38 48
L 22 / 28 42 53
L 35 / 42 48 60
S 6 / 8 35 44
S 10 / 12 37 47
S 14 / 16 43 54
S 20 50 63
S 25 54 68
S 30 58 72
S 38 65 82

387
7
0,2
cutter.
2.3 Slightly deburr tube ends inside and outside.
Clean the tube.
Attention!
If tubes are not cut off squarely or are not properly
deburred, this may reduce the service life and leak-
tightness of the couplings.
1. Lubricate the outside surface the sleeve lightly using
assembly paste (e.g. MPE assembly paste). Then
insert the sleeve into the tube up to the knurled
section.
vents the sleeve from being displayed or falling out.
Series
Tube OD
[mm]
Wall thickness [mm]
0.5 0.75 1 1.5 2 2.5 3
L 6
L 8
L 10
L 12
L 15
L 18
L 22
L 28
L 35
L 42
S 6
S 8
S 10
S 12
S 14
S 16
S 20
S 25
S 30
S 38
max. 1
Sleeve inserted

388
3
4
3.1 In order to carry out pre-assembly correctly, the
thread of the coupling connecting piece, the tube end,
the cutting ring, the union nut and the taper surfaces
have to be lubricated with assembly paste (e.g. MPE
assembly paste).
3.2 Put the union nut and the 2SVA cutting ring on the
tube end.
Attention!
Make sure that the 2SVA cutting ring is in the right
position.
Hardened pre-assembly studs are wear-resistant, thus
be checked after approx. every 50 pre-assemblies for
trueness of gauge.
Attention!
are damaged in the taper section must be replaced
immediately.
All specified assembly distances (number of turns) must
be adhered to. Otherwise there is a danger that the
coupling will leak or that the tube will tear out of the
coupling.
4.2 Turn union nut until it is hand-tight.

389
7
5
4.3 Tighten union nut with approx. 1 1/4 1 1/2 turns.
Note:
Marking a stroke on the union nut and the tube makes it
easier to achieve the correct number of turns.
approx. 1 1/4 1 1/2 turns
Check results
Unscrew the union nut and check shoulder throw-up.
The shoulder throw-up must cover approx. 70% of the
cutting-edge front face.
On this position, it is still permissible for the cutting ring
to turn on the tube.
Attention!
dure must be repeated using more force. The result
must be rechecked.
Note:
Material pushed up: approx. 70 %

390
6
7
Repeat assembly
For repeat assembly, the union nut must be tightened by
approx. 1/2 turns
approx. 1/2 turns
Final assembly
6.1 Lubricate the thread, the pre-assembled tube end,
the union nut and the taper lightly with assembly paste
(e.g. MPE assembly paste).
it is hand-tight.
6.4 Tighten up further by approximately 1/2 turns.
Attention!

391
7
L
H
1
2
Assembly instructions for 2S plus tube couplings
Notes
DIN 3859 Part 2.
Attention!
of non-ferrous metals
Tube preparation
must be taken account for determining the tube lengths.
L 6 / 8 31 39
L 10 / 12 33 42
L 15 36 45
L 18 38 48
L 22 / 28 42 53
L 35 / 42 48 60
S 6 / 8 35 44
S 10 / 12 37 47
S 14 / 16 43 54
S 20 50 63
S 25 54 68
S 30 58 72
S 38 65 82

392
0,2
cutter.
Clean the tube.
Attention!
1. Lubricate the outside surface the sleeve lightly using
lubricant (e.g. using mineral-oil based hydraulic fluid
HLP32). Then insert the sleeve into the tube up to the
knurled section.
vents the sleeve from being displayed or falling out.
Series Tube OD
[mm]
Wall thickness [mm]
0.5 0.75 1 1.5 2 2.5 3
L 6
L 8
L 10
L 12
L 15
L 18
L 22
L 28
L 35
L 42
S 6
S 8
S 10
S 12
S 14
S 16
S 20
S 25
S 30
S 38
max. 1
Sleeve inserted

393
7
3
4
3.2 Put the union nut and the 2S plus cutting ring on the
tube end, one after the other. The cutting edges of the
2S plus cutting ring point towards the tube end.
Attention!
Make sure that the 2Splus cutting ring is in the right
position.
VOSS 2Splus cutting rings can be pre-assembled
directly in the coupling connecting piece or using a
hardened pre-assembly stud.
be checked after approx, every 50 pre-assemblies for
trueness of gauge
Attention!
on all accounts. When mounting these directly in the
for pre-assembly.
All specified assembly distances must be adhered to.
Otherwise there is a danger that the coupling will leak or
that the tube will tear out of the coupling.

394
5
4.3 Use a spanner to tighten the union nut.
up to tube OD 18 mm
1 1/2 turns
from tube OD 20 mm
1 1/4 turns
Notes:
When installing couplings in piping systems, always hold
the coupling connecting piece in a spanner. Marking a
stroke on the union nut and the tube makes it easier to
achieve the correct number of turns.
Check results
Unscrew the union nut and check the shoulder throw-
up. The shoulder throw-up must cover at least 80% of
the cutting-edge front face.
turn on the tube. Any dirt must be removed.
Attention!
dure must be repeated by using more force. The result
must be rechecked.
Note:
up to tube OD 18 mm 1 1/2 turns
from tube OD 20 mm 1 1/4 turns
up to tube OD 18 mm 1 1/2 turns
from tube OD 20 mm 1 1/4 turns

395
7
7
6
Repeat assembly
For repeat assembly, the union nut must be tightened
approx. 1/4 turns
approx. 1/4 turns
Final assembly
it is hand-tight.
Attention!
used again for the final assembly.
a noticeable force increase
Attention!

396
L
H
1
2
Assembly instructions for ES-4 tube couplings
Notes
assembly instructions are up to date
DIN 3859 Part 2.
Attention!
of non-ferrous metals.
Tube preparation
lengths.
L 6 / 8 31 39
L 10 / 12 33 42
L 15 36 45
L 18 38 48
L 22 / 28 42 53
L 35 / 42 48 60
S 6 / 8 35 44
S 10 / 12 37 47
S 14 / 16 43 54
S 20 50 63
S 25 54 68
S 30 58 72
S 38 65 82

397
7
0,2
cutter.
Clean the tube.
Attention!
deburred, this may reduce the service life and leak-tight-
ness of the couplings. Burrs on the tube outer diameter
can damage the inner O-ring.
1. Lubricate the outside surface of the sleeve lightly (e.g.
using mineral-oil based hydraulic fluid HLP32). Then
section.
vents the sleeve from being displaced or from falling
out.
Series Tube OD
[mm]
Wall thickness [mm]
0.5 0.75 1 1.5 2 2.5 3
L 6
L 8
L 10
L 12
L 15
L 18
L 22
L 28
L 35
L 42
S 6
S 8
S 10
S 12
S 14
S 16
S 20
S 25
S 30
S 38
Sleeve inserted
max. 1

398
3
4
Wetting the tube end with lubricant makes it easier to
push the ES-4 cutting ring onto the tube.
3.2 Put the union nut and the ES-4 cutting ring on the
tube end, one after the other. The cutting edges of the
ES-4 cutting ring point towards the tube end.
Attention!
Make sure that the ES-4 cutting ring is in the right
position.
VOSS ES-4 cutting rings can be pre-assembled directly
in the coupling connecting piece or using a hardened
pre-assembly die.
Hardened pre-assembly dies are wear-resistant, thus
trueness of gauge.
Attention!
on all accounts. When mounting them directly in the
for pre-assembly.
All specified assembly distances must be adhered to.
Otherwise there is a danger that the coupling will leak or
that the tube will tear out of the coupling.

399
7
5
approx. 1 1/4 turns
4.3 Tighten the union nut by approx. 1 1/4 turns
(min. 1 to max. 1 1/2 turns). This pushes the ES-4
cutting ring against the end face of the stud.
Notes:
When installing couplings in piping systems, always hold
the coupling connecting piece in a spanner. Marking a
stroke on the union nut and the tube makes it easier to
achieve the correct number of turns.
approx. 1 1/4 turns
Check results
5.1 Unscrew the union nut and check the shoulder
throw-up, gap width and the moulded seal. The shoulder
throw-up must cover at least 80% of the cutting edge
front face.
5.2 Due to slight sprining back during disassembly of the
tube coupling, a gap of approx. 0.5 mm results between
the ES-4 cutting ring and the coupling face (or pre-
assembly coupling piece face). This gap is closed again
during finish assembly.
turn on the tube.
Attention!
The moulded seal must be undamaged. Remove
possible soiling and replace the moulded seal if
necessary.
With a different gap width or an insufficient shoulder
throw-up, repeat assembly with increased force and
check again.
Note:
We recommend the use of the VOSS gauge to check the
correct axial position of the cutting ring.
Moulded seal

400
6
7
Final assembly
6.2 Insert the pre-assembled tube end carefully into
the coupling connecting piece, making sure that the
moulded seal is not damaged and is seated in the seal
groove correctly. Then turn the union nut until it is hand-
tight.
Attention!
used again for final assembly.
Attention!
Repeat assembly
7.1 Each time the tube coupling is unscrewed, the
moulded seal must be checked for damage and
replaced if necessary.
7.2 For repeat assembly, the union nut must be
tightened again with the same amount of force as during
inital assembly.
approx. 1/4 turns

401
7
L
H
1
2
Assembly instructions for ES-4VA tube couplings
Notes
Toughened tools must be used to pre-assemble ES-4VA
cutting rings.
These assembly instructions describe the pre-assembly
in hardened pre-assembly studs.
Attention!
supports made of material 1.4571 for thin-walled steel
tubes.
Tube preparation
lengths.
L 6 / 8 31 39
L 10 / 12 33 42
L 15 36 45
L 18 38 48
L 22 / 28 42 53
L 35 / 42 48 60
S 6 / 8 35 44
S 10 / 12 37 47
S 14 / 16 43 54
S 20 50 63
S 25 54 68
S 30 58 72
S 38 65 82

402
0,2
1 is permissible. Do not use a rotary grinder or tube.
Clean the tube.
Attention!
1. Lubricate the outside surface of the sleeve lightly using
assembly paste (e.g. MPE assembly paste). Then
section.
vents the sleeve from being displaced or falling out.
Series Tube OD
[mm]
Wall thickness [mm]
0.5 0.75 1 1.5 2 2.5 3
L 6
L 8
L 10
L 12
L 15
L 18
L 22
L 28
L 35
L 42
S 6
S 8
S 10
S 12
S 14
S 16
S 20
S 25
S 30
S 38
Sleeve inserted
max. 1

403
7
3
4
3.1 To ensure correct pre-assembly, lubricate the pre-
assembly stud, tube end, cutting ring, union nut and the
cone surface with assembly paste (e.g. MPE assembly
paste).
3.2 Push the union nut and the ES-4VA cutting ring onto
the tube end.
Attention!
Make sure that the ES-4VA cutting ring is in the right
position.
trueness of gauge.
Attention!
are damaged in the taper section must be replaced
immediately. All specified assembly distances must
be adhered to. Otherwise there is a danger that the
coupling will leak or that the tube will tear out of the
coupling.
4.2 Push the pre-assembled tube end into the taper
of the hardened manual pre-assembly die and turn the
union nut until it is hand-tight.

404
5
4.3 Tighten union nut with approx. 1 1/4 turns
(min. 1 to max. 1 1/2 turns). This pushes the ES-4
cutting ring against the end face of the stud.
Note:
Marking a stroke on the union nut and the tube makes it
easier to achieve the correct number of turns.
Check results
5.1 Unscrew the union nut and check the shoulder
throw-up, gap width and the moulded seal. The
shoulder throw-up must cover at least 70% of the
cutting edge front face.
5.2 Due to slight sprining back during disassembly of the
tube coupling, a gap of approx. 0.5 mm results between
the ES-4VA cutting ring and the coupling face. This gap
is closed again during finish assembly.
turn on the tube.
Attention!
The moulded seal must be undamaged. Remove
possible soiling and replace the moulded seal if
necessary.
With a different gap width or an insufficient shoulder
throw-up, repeat assembly with incresed force and
check again.
Note:
approx. 1 1/4 turns
Moulded seal
Raised material approx. 70 %

405
7
6
7
Final assembly
6.1 Lubricate the thread, the pre-assembled tube end,
the union nut and the taper lightly with assembly paste
(e.g. MPE assembly paste).
coupling connecting piece. When fitting the parts
together, take care not to damage the moulded seal and
ensure that it is seated in the seal groove correctly. Then
turn the union nut until it is hand-tight.
Attention!
Repeat assembly
7.1 Each time the tube coupling is unscrewed, the
moulded seal must be checked for damage and
replaced if necessary.
7.2 For repeat assembly, the union nut must be
tightened using the same force as for the original
assembly.
approx. 1/4 turns
approx. 1/4 turns

406
L2
L1
L3
1
2
Tube preparation
2.1 When determining the tube lengths to be
used, dimensions L1 and L2 have to be taken
into consideration. The forming process com-
presses the tube and shortens it by the length
L1.
In addition, the minimum lengths A1, A2 and B1,
B2 required for clamping the tube ends have to
be taken into consideration.
Assembly instructions for VOSSForm
SQR
tube couplings
Notes
Before starting the assembly work, read and observe
the general notes in the up-to-date VOSS catalogue and
check that your assembly instructions are up to date.
These assembly instructions describe the tube forming
and the final assembly of VOSSForm
SQR
.
These assembly instructions are not a substitute for the
detailed operating instructions of the forming device
used. They only describe the basic tube preparation,
forming and final assembly steps.
Height of the completely assembled VOSSForm
SQR

connection.
Series Tube
OD
[mm]
s
[mm]
L1
[mm]
L2
[mm]
L3
approx.
[mm]
A1 [mm]
R3xDN
A2 [mm]
R3xDN
B1
[mm]
B2
[mm]
45 90 45 90
L 6 1 5.6 12.6 15.5 60 69 47 56 82 56
1.5 6.0 13.0 16.0
2 5.3 12.3 16.0
L 8 1 5.0 12.0 15.5 60 64 47 51 82 56
1.5 5.7 12.7 16.0
2 5.2 12.2 16.0
2.5 4.4 11.4 16.0
L 10 1 5.2 12.2 15.5 60 60 47 47 83 57
1.5 5.8 12.8 16.0
2 5.1 12.1 16.0
L 12 1 5.1 12.1 15.5 60 60 47 47 83 57
1.5 5.8 12.8 16.0
2 4.9 11.9 16.0
L 15 1.5 6.0 13.0 17.5 70 70 56 56 96 68
2 5.6 12.6 17.5
2.5 5.3 12.3 17.5
L 18 1.5 5.9 13.4 18.5 75 75 61 61 101 73
2 5.3 12.8 18.5
2.5 5.1 12.6 18.5
3 5.1 12.6 18.5
L 22 1.5 6.5 14.0 20.0 85 85 70 70 113 83
2 5.6 13.1 20.0
2.5 5.4 12.9 20.0
3 5.3 12.8 20.0
L 28 2 5.6 13.1 20.0 93 93 79 79 120 92
2.5 5.4 12.9 20.0
3 5.5 13.0 20.0
L 35 2 7.6 18.1 24.0 107 107 87 87 142 102
2.5 7.0 17.5 24.0
3 7.5 18.0 25.0
4 7.2 17.7 25.0
L 42 2 7.6 18.6 24.5 117 117 97 97 152 112
2.5 7.0 18.0 24.5
3 7.4 18.4 25.5
4 7.0 18.0 25.5

407
7
A1
A2
R
B1
B2
0,2
Minimum lengths for clamping in curved tubes
(R 3x Tube OD).
2.2 Cut tubes at right angles. An angle tolerance
of 1 is permissible. Do not use tube cutters or
angle grinders to cut tubes.
Minimum lengths for clamping in straight tubes.
max. 1
Series Tube
OD
[mm]
s
[mm]
L1
[mm]
L2
[mm]
L3
approx.
[mm]
A1 [mm]
R3xDN
A2 [mm]
R3xDN
B1
[mm]
B2
[mm]
45 90 45 90
S 6 1 5.6 12.6 16.0 62 69 49 56 85 59
1.5 6.0 13.0 16.5
2 5.3 12.3 16.5
S 8 1 5.0 12.0 16.0 62 64 49 51 85 59
1.5 5.7 12.7 16.5
2 5.2 12.2 16.5
2.5 4.4 11.4 16.5
S 10 1.5 6.5 14.0 18.5 64 64 50 50 90 62
2 5.9 13.4 18.5
2.5 5.2 12.7 18.5
S 12 1.5 6.4 13.9 18.5 64 64 50 50 90 62
2 5.7 13.2 18.5
2.5 5.2 12.7 18.5
3 4.9 12.4 18.5
S 14 1.5 6.7 14.7 20.5 72 72 57 57 101 71
2 6.3 14.3 20.5
2.5 5.8 13.8 20.5
3 5.7 13.7 20.5
S 16 1.5 6.9 15.4 21.0 77 77 61 61 107 75
2 6.1 14.6 21.0
2.5 5.7 14.2 21.0
3 5.5 14.0 21.0
4 5.2 13.7 21.5
S 20 2 8.1 18.6 25.0 88 88 69 69 122 84
2.5 7.2 17.7 25.0
3 6.8 17.3 25.0
3.5 6.6 17.1 25.0
4 6.4 16.9 25.0
S 25 2 7.7 19.7 28.0 103 103 82 82 140 98
2.5 7.3 19.3 28.0
3 7.0 19.0 28.0
4 6.6 18.6 28.0
S 30 2 7.9 21.4 30.5 114 114 92 92 155 111
2.5 7.3 20.8 30.5
3 8.1 21.6 31.5
4 7.6 21.1 31.5
5 7.3 20.8 31.5
6 7.0 20.5 32.0
S 38 2.5 10.4 26.4 34.5 134 134 108 108 180 128
3 9.1 25.1 34.5
4 9.2 25.2 35.5
5 9.1 25.1 35.5
6 9.0 25.0 35.5
7 9.0 25.0 36.0

408
3
Clean the tube.
Attention!
Burrs on the outer and inner edges of the tube end can
impair the forming process. Tubes which are not cut off
squarely and correctly deburred reduce the service life
and leak-tightness of the couplings.
Lubricating tools and steel tubes
After every tool change and after roughly 100 forming
procedures, the outer surfaces of the clamping jaws at
the tapered section should be lightly lubricated using
hydraulic fluid or a non-resinous lubricant containing
MoS
2
.
Attention!
Ensure that no oil is applied to the teeth of the clamping
jaw, otherwise the gripping function may be impaired.
Lubricating phosphate-treated steel tubes:
in order to reduce tool wear, on every tenth tube being
processed, apply a thin film of hydraulic fluid to the
internal and external surfaces of the tube section to be
formed.
Lubricating zinc-plated steel tubes:
in order to reduce tool wear, on every tenth tube being
processed, apply a thin film of hydraulic fluid to the
internal and external surfaces of the tube section to be
formed.
Attention!
If the lubricant film on the outer perimeter of the tubing is
too thick, it will be trapped by the forming process and
lead to inaccurate contours.

409
7
4
5
Notes on tube forming
4.1 Prepare the tube forming device as described in the
operating instructions and insert the tools.
4.2 Push the SQR-function nut onto the
prepared tube end.
4.3 Form the tube as described in the operating
instructions.
Check the results
It is adequate to visually inspect the quality of the three
characteristic VOSSForm
SQR
features.
Contact surface
for moulded seal
24 taper contour
Contact surface
for clamping ring

410
6
7
Final assembly
6.1 Install the moulded seal, ensuring that it is not
twisted or damaged.
Push the pre-assembled tube end straight into the taper
of the coupling connecting piece.
6.2 Lubricate the threads, the formed tube end and the
moulded seal lightly (e.g. using mineral-oil based
hydraulic fluid HLP32).
6.3 Turn union nut until it is hand-tight.
To achieve the final tightening torque, turn the SQR spe-
cial function nut by approx. 1/2 to 3/4 of a turn.
If the coupling is being installed on an already-installed
piping system, hold the coupling connecting piece with a
spanner when tightening the coupling.
Marking a stroke on the SQR special function nut and
the tube makes it easier to achieve the correct number
of turns when tightening the coupling.
approx. 1/2 3/4 turns
Re-assembly of couplings
7.1 Every time the coupling is taken apart, the moulded
seal must be checked for damage and, if necessary,
replaced.
7.2 For the second and all ensuing re-assembly proces-
ses, the SQR-function nut must be tightened by only
1/4 to 1/2 turns after it has been hand-tightened.
Attention!
fore re-assembling the coupling, the 24 taper contour,
the moulded seal contact surfaces and the clamping ring
must be checked for damage (see 5: Checking results)

411
7
8
Tightening torques
8.1 As an alternative to achieving pre-assembly and final
assembly states by distance dependent assembly, the
tightening torques can be applied directly. The stated
tightening torques are guideline values which have been
determined under the following conditions:
n tube specifications as given in the general notes
n VOSS coat surface finish on all coupling compo-
nents, and additional wax coating on the SQR-
function nut.
Series Tube OD [mm] Tightening torque
in Nm 5 %
L 6 20
L 8 30
L 10 40
L 12 50
L 15 70
L 18 90
L 22 120
L 28 160
L 35 250
L 42 380
S 6 25
S 8 40
S 10 50
S 12 60
S 14 75
S 16 85
S 20 140
S 25 190
S 30 270
S 38 400

412
L3
L2
L1
1
2
Tube preparation
2.1 When determining the tube lengths to be
used, dimensions L1 and L2 have to be taken
into consideration. The forming process com-
presses the tube and shortens it by the length
L1.
In addition, the minimum lengths A1, A2 and B1,
B2 required for clamping the tube ends have to
be taken into consideration.
Assembly instructions for VOSSForm
SQR
VA tube couplings
Notes
These assembly instructions describe the tube forming
and the final assembly of VOSSForm
SQR
VA.
These assembly instructions are not a substitute for the
detailed operating instructions of the forming device
used. They only describe the basic tube preparation,
forming and final assembly steps.
Height of the completely assembled
VOSSForm
SQR
VA connection.
Series Tube
OD
[mm]
s
[mm]
L1
[mm]
L2
[mm]
L3
approx.
[mm]
A1 [mm]
R3xDN
A2 [mm]
R3xDN
B1
[mm]
B2
[mm]
45 90 45 90
L 6 1 5.6 12.6 15.5 60 69 47 56 82 56
1.5 6.1 13.1 16.0
2 5.5 12.5 16.0
L 8 1 5.5 12.5 15.5 60 64 47 51 82 56
1.5 5.7 12.7 16.0
2 5.2 12.2 16.0
2.5 4.7 11.7 16.0
L 10 1 5.8 12.8 15.5 60 60 47 47 83 57
1.5 6.0 13.0 16.0
2 5.2 12.2 16.0
L 12 1 5.9 12.9 15.5 60 60 47 47 83 57
1.5 5.7 12.7 16.0
2 5.1 12.1 16.0
L 15 1.5 6.5 13.5 17.5 70 70 56 56 96 68
2 5.8 12.8 17.5
2.5 5.6 12.6 17.5
L 18 1.5 6.7 14.2 18.5 75 75 61 61 101 73
2 5.8 13.3 18.5
2.5 5.5 13.0 18.5
3 5.8 13.3 18.5
L 22 1.5 7.1 14.6 20.0 85 85 70 70 113 83
2 6.6 14.1 20.0
L 28 2 6.7 14.2 19.5 93 93 79 79 120 92
2.5 6.2 13.7 19.5
3 6.3 13.8 19.5
L 35 2 9.0 19.5 24.0 107 107 87 87 142 102
2.5 8.1 18.6 24.0
3 8.6 19.1 25.0
L 42 2 8.4 19.4 24.5 117 117 97 97 152 112
3 8.6 19.6 25.5

413
7
B1
B2
A1
A2
R
0,2
Minimum lengths for clamping in straight tubes.
Minimum lengths for clamping in curved tubes
(R 3x Tube OD).
2.2 Cut off stainless-steel tubing at right angles.
An angle tolerance of 1 is permissible. Do not
use tube cutters or angle grinders to cut tubes.
max. 1
Series Tube
OD
[mm]
s
[mm]
L1
[mm]
L2
[mm]
L3
approx.
[mm]
A1 [mm]
R3xDN
A2 [mm]
R3xDN
B1
[mm]
B2
[mm]
45 90 45 90
S 6 1 5.6 12.6 16.0 62 69 49 56 85 59
1.5 6.1 13.1 16.5
2 5.5 12.5 16.5
S 8 1 5.5 12.5 16.0 62 64 49 51 85 59
1.5 5.7 12.7 16.5
2 5.2 12.2 16.5
2.5 4.7 11.7 16.5
S 10 1.5 6.7 14.2 18.5 64 64 50 50 90 62
2 5.9 13.4 18.5
2.5 5.5 13.0 18.5
S 12 1.5 6.3 13.8 18.5 64 64 50 50 90 62
2 5.7 13.2 18.5
2.5 5.3 12.8 18.5
3 5.0 12.5 18.5
S 14 1.5 6.7 14.7 20.5 72 72 57 57 101 71
2 6.3 14.3 20.5
2.5 5.7 13.7 20.5
3 5.7 13.7 20.5
S 16 1.5 7.2 15.7 21.0 77 77 61 61 107 75
2 6.2 14.7 21.0
2.5 6.0 14.5 21.0
3 5.8 14.3 21.0
S 20 2 8.5 19.0 25.0 88 88 69 69 122 84
2.5 7.7 18.2 25.0
3 7.3 17.8 25.0
S 25 2 8.7 20.7 28.0 103 103 82 82 140 98
2.5 8.0 20.0 28.0
3 7.6 19.6 28.0
4 7.6 19.6 28.0
S 30 2.5 8.1 21.6 30.5 114 114 92 92 155 111
3 8.7 22.2 31.5
4 8.4 21.9 31.5
S 38 3 10.3 26.3 34.5 134 134 108 108 180 128
4 10.2 26.2 35.5
5 9.8 25.8 35.5

414
3
Clean the tube.
Attention!
Burrs on the outer and inner edges of the tube end can
impair the forming process. Tubes which are not cut off
squarely and correctly deburred may reduce the service
life and leak-tightness of the couplings.
Lubricating tools and stainless steel tubes
3.1 Lubricating the tools
Clamping jaws:
After every tool change and after roughly 100 forming
procedures, the outer part of clamping jaw taper must
be lightly lubricated using hydraulic fluid or a non-
resinous lubricant containing MoS
2
. VOSS recommends
that separate sets of clamping jaws be used if steel and
stainless steel tubes are being used both at the same
time.
Attention!
Ensure that no oil is applied to the teeth of the clamping
jaw, otherwise the gripping function may be impaired.
3.2 Lubricating the stainless steel tubes
To ensure fault-free forming, each tube must be
lubricated on the inside and outside in the forming area
with a thin film of oil. (VOSS forming oil FOE).
Attention!
If the lubricant film on the outer tubing surface is too
thick, it will be trapped between the forming tool and the
tube, thus leading to inaccurate contours. Always use
VOSS forming oil FOE. (The use of normal hydraulic oil is
not allowed).

415
7
4
5
Notes on tube forming
4.1 Prepare the tube forming device as described in the
operating instructions and insert the tools.
4.2 Push the SQR-function nut onto the pre pared tube
end.
4.3 Form the tube as described in the operating
instructions.
Checking the results
It is adequate to visually inspect the quality of the three
characteristic VOSSForm
SQR
features.
Contact surface
for moulded seal
24 taper contour
Contact surface
for clamping ring

416
6
7
Final assembly
6.1 Install the moulded seal, ensuring that it is not
twisted or damaged.
Push the pre-assembled tube end straight into the taper
of the coupling connecting piece.
6.2 Apply a light film of assembly paste (e.g. MPE
assembly paste) to the threads, the formed tube end,
the SQR special function nut and the moulded seal.
6.3 Turn the SQR special function nut until it is hand-
tight.
To achieve the final tightening torque, turn the SQR
special function nut by approx. 1/2 to 3/4 of a turn.
piping system, hold the coupling connecting piece with a
spanner when tightening the coupling.
Marking a stroke on the SQR-function nut and the tube
makes it easier to achieve the correct number of turns
when tightening the coupling.
Re-assembly of couplings
7.1 Every time the coupling is taken apart, the moulded
seal must be checked for damage and, if necessary,
replaced.
7.2 For second and all following re-assembly processes,
the SQR-function nut must be tightened by only
1/4 to 1/2 turns after it has been hand-tightened.
Attention!
Before re-assembling the coupling, the 24 taper
contour, the moulded seal contact surfaces and the
clamping ring must be checked for damage
(see 5: Checking results).

417
7
8
Tightening torques
8.1 As an alternative to achieving pre-assembly and final
tightening torques are guideline values which have been
determined using MPE assembly paste.
Tube specifications as given in the general notes.
Series Tube OD [mm] Tightening
torque
Nm 5 %
L 6 25
L 8 35
L 10 55
L 12 65
L 15 90
L 18 125
L 22 150
L 28 220
L 35 380
L 42 580
S 6 30
S 8 50
S 10 65
S 12 85
S 14 115
S 16 125
S 20 220
S 25 300
S 30 430
S 38 640

418
L2 L2
x
t5
L1
0,2
2
Assembly instructions for BV-10 flared couplings
1
Notes
These assembly instructions describe pre-assembly and
final assembly of BV-10 flared couplings.
Attention!
Various VOSS pre-assembly devices are available for
pre-assembly of the flared cone. The specifications in
the respective operating instructions apply to the
assembly procedures here.
Tube preparation
2.1 Determine the tubing dimensions using the following
table of dimensions.
Series Tube
OD[mm]
t5
[mm]
x approx.
[mm]
L1
approx.
[mm]
L2
approx.
[mm]
L 6 7 0.8 7.8 55
L 8 7 1.1 8.1 55
L 10 7 0.5 7.5 60
L 12 7 0.5 7.5 62
L 15 7 0.5 7.5 62
L 18 7.5 1.5 9 63
L 22 7.5 1.5 9 65
L 28 7.5 1.5 9 72
L 35 10.5 2.8 13.3 75
L 42 11 3 14 75
S 8 7 2.4 9.4 55
S 10 7.5 2.4 9.9 60
S 12 7.5 2.4 9.9 60
S 14 8 3.4 11.4 65
S 16 8.5 2.5 11 65
S 20 10.5 3.5 14 70
S 25 12 3.5 15.5 75
S 30 13.5 4.5 18 75
S 38 16 5 21 78
2.2 Cut tubes at right angles. An angle tolerance of 1
is permissible. Do not use tube cutters or angle grinders
to cut tubes. Slightly deburr tube end inside and outside.
Clean the tube.
max. 1

419
7
3
Flared cone pre-assembly
3.1 Push the BV-10 union nut and the clamping ring
onto the tube as shown in the diagram.
3.2 Pre-assembly principle
Only use a VOSS pre-assembly device for this process.
During the pre-assembly the BV-10 flared cone is
pressed into the tube.
Attention!
Set up the pre-assembly device and tools as described
in the corresponding operating instructions. The outer
diameter and wall thickness of the tube must be
observed when choosing which tools to use.
Pre-assemble the coupling as described in the operating
instructions.
3.3 Apply a light film of lubricant (e.g. mineral-oil based
hydraulic fluid HLP32) to toothed section and the
cylindrical collar of the BV-10 flared cone and then push
this onto the assembly mandrel.

420
90 1
3.4 Push the tube, with the BV-10 union nut and
clamping ring on it, from the outside into the hole of
the clamping jaws until it is centred on the BV-10 flared
cone.
The BV-10 union nut and clamping ring must remain
outside of the assembly area.
Attention!
Make sure the correct clamping jaw pressure is set.
The tube must not be able to slip when the assembly
process is started. Follow the relevant sections of the
operating instructions for the respective pre-assembly
device.
3.5 Press the BV-10 flared cone into the tube.
The optimum flared-cone assembly position is achieved
when the remaining gap is 0.5 mm but not more than
1 mm.
Attention!
The BV-10 flared cone must not touch the flat surfaces
of the tube end.
3.6 Check that the flared cone fits squarely.
Gap of 0.5 up to max. 1 mm required

421
7
4
Final assembly
4.1 Push the O-ring on and check that it is bedded in
the groove of the flared cone without being twisted.
Lubricate the threads, the taper surface and the BV-10
union nut lightly (e.g. using mineral-oil based hydraulic
fluid HLP32).
4.2 Insert the pre-assembled tube end into the cone of
the coupling connecting piece at a straight angle.
Attention!
Make sure the O-ring is not damaged. Ensure a tension-
free connection of the pre-assembled tube and the
coupling connecting piece.
4.3 Turn the BV-10 union nut until it is hand-tight.
wrong
correct

422
5
Re-assembly
Each time the BV-10 flared cone is unscrewed, the
O-ring must be checked for damage and replaced if
necessary.
For the second and all ensuing re-assembly processes,
the BV-10 union nut must be tightened by only
1/4 1/2 turns after it has been hand-tightened.
approx. 3/4 1 turns
4.4 Tighten up the coupling by turning the BV-10 union
nut by approx. 3/4 1 full turns.
tubing system, hold the coupling connecting piece with
a spanner when tightening the coupling.
approx. 3/4 1 turns

423
7
1
2
Assembly instructions for taper (DKO) and weld nipple
Notes
These assembly instructions describe the assembly of
VOSS couplings and coupling parts with taper coupling
(DKO) according to ISO-8434-1.
Attention!
When the tube coupling is being connected, the DKO
coupling must always be held with a spanner to counter
tightening torques.
Assembly of taper coupling
Assembly procedure
1. Check that the O-ring is not twisted and that is
bedded correctly in the groove of the taper.
2. Lubricate the threads, the cone surface and the
O-ring lightly (e.g. using mineral-oil based hydraulic
fluid HLP32).
3. Keeping the taper aligned, insert it into the cone and
press it in firmly.
Attention!
After this step, no further alignment correction is
possible.
4. Turn the union nut until it is hand-tight.
5. Then use a spanner to finally tighten up the coupling
by the required angle or number of turns.
Marking a stroke on the DKO union nut and the coupling
connecting piece makes it easier to achieve the correct
number of turns when tightening the coupling.

424
3
Attention!
The DKO coupling must be tightened by turning the
union nut, not the counter connecting piece.
Assembly parameters
As an alternative to achieving pre-assembly and final assembly states by distance dependent assembly, the tighten-
ing torques can be applied directly. The stated tightening torques are guideline values which have been determined
under the following conditions:
Series Tube OD
[mm]
Union nut thread Number of turns,
first assembly
Number of turns,
re-assembly
Tightening torque
[Nm] 5 %
L 6 M 12 x 1.5 approx. 2/3 approx. 1/3 20
L 22 M 30 x 2 approx. 1/2 approx. 1/3 120
S 6 M 14 x 1.5 approx. 2/3 approx. 1/3 25
S 20 M 30 x 2 approx. 1/2 approx. 1/3 140

425
7
L2
30
4
Assembly of weld nipple couplings
4.1 General notes
Weld nipples can be used with any tube coupling
conforming to ISO 8434-1.
The weld nipples are phosphated and designed with a
V-seam when delivered.
The weld nipples are welded on to the prepared tube
end without the O-ring.
The user (installation company) is responsible for the
welding work.
4.2 Determining the tube length
Series Tube OD [mm] L2
L 6 31.5
L 8 31.5
L 10 33.5
L 12 33.5
L 15 34.5
L 18 37
L 22 39.5
L 28 42.5
L 35 49.5
L 42 50
S 6 31.5
S 8 31.5
S 10 33.5
S 12 33.5
S 14 39.5
S 16 41
S 20 47
S 25 53.5
S 30 57
S 38 64

426
4.3 Assembly procedure
The principle of final assembly of weld nipple couplings
is the same as for taper couplings.
1. Push the O-ring on and check that it is bedded in the
groove of the taper without being twisted.
2. Lubricate the threads, the taper surface and the
O-ring lightly (e.g. using mineral-oil based hydraulic
fluid HLP32).
3. Insert the taper into the cone and press it in
firmly. Turn the union nut until it is hand-tight.
4. To complete the assembly, turn the nut by approx.
1/4 turn.
approx. 1/4 turns

427
7
L1
L3 L3
1
2
Assembly instructions for flange couplings / ZAKO / ZAKO LP
Note
The ZAKO flange coupling product range is designed
for use in pipelines with outer diameters ranging from
16mm to 114.3 mm. Flanges with a SAE hole pattern
and square flanges can be used. For low-pressure
applications, the ZAKO LP System can be used; this is
available for thin-walled pipelines with tube ODs from
48.3mm to 114.3 mm.
Different pre-assembly devices are available for the ZAKO
ring assembly, depending on the tube and pipe dimen-
sions. In each case, the descriptions given in the relevant
individual operating instructions apply to the assembly
procedures.
Tube preparation
2.1 Tube lengths for connecting flanges:
The first step in determining the required tube length is
to calculate the theoretical total tube length L1. After
this, the length L3 must be subtracted from the total
tube length for each connection used (see table for
length L3).
Tube Connecting
OD flange L3 approx.
[mm] [mm]
ZAKO
16 8
20 8
25 8.5
30 8.5
38/42 9
50 10
60 15
65 11
75 16
80 16
88 20
101.6 20
114.3 20
ZAKO LP
48.3 10
60.3 15
76.1 16
88.9 20
114.3 20
Tube Coupling flange
OD L3 approx. L2 approx.
[mm] [mm] [mm]
ZAKO
16 8 5.5
20 8 5.5
25 8.5 5.5
30 8.5 6
38 9 7
50 10 7
60 15 12
65 11 8
75 16 12
80 16 13
88 20 16
101.6 20 16
114.3 20 16
ZAKO LP
48.3 10 7
60.3 15 12
76.1 16 12
88.9 20 16
114.3 20 16
428
L1
L3
L2
L
0,2
3
2.2 Tube lengths for coupling flanges:
To determine the tube lengths of coupling flanges the
tube lengths L3 applies to the connecting surface of the
ZAKO ring with O-ring. If the connecting surface of the
ZAKO ring without O-ring is required, length L2 must be
taken into account.
2.3 Compliance with straight tube length:
To assembly the ZAKO rings, a minimum tube length (L)
of the straight tube end must be taken into account with
curved tubing. Please observe the specifications listed
here.
2.4 Preparing the tube ends:
Cut tubes at right angles. An angle tolerance of 1 is
permissible.
Do not use tube cutters or angle grinders to cut tubes.
Deburr the inner and outer edges of the tube ends.
For the couplings to fulfil their function optimally, it is
re commended that the outer edges of the tube ends be
deburred only slightly and the inner edges more
extensively.
The tube ends must be undamaged both internally and
externally and free of metal chips, dirt, rust and other
contamination.
Principle of the ZAKO ring pre-assembly
3.1 Push the ZAKO flange onto the tube with the
toothed conical section of the hole pointing towards the
tube end.
max. 1

429
7
3.2 Pre-assembly principle
The pre-assembly procedure shown here is carried out
using the VOSS pre-assembly device. Pre-assembly
involves pressing the ZAKO ring into the tube.
Attention!
Set up the pre-assembly device and tools as described
in the corresponding operating instructions. The tubes
outer diameter and wall thickness must be taken into
account when choosing what tools to use.
Pre-assemble the coupling as described in the operating
instructions.
3.3 To reduce the assembly forces, lubricate the conical
and cylindrical sections of the ZAKO ring generously

430
4
3.4 Push the tube through the opening of the yoke plate
of the pre-assembly device and, while doing so, press
the ZAKO ring against the pressure plate. Now clamp
the clamping jaws around the tube. Push the clamping
jaws along the tube until they are in the conical opening
of the yoke plate.
The ZAKO ring must remain outside the assembly
section of the tube.
3.5 Start the assembly process as described in the
pre-assembly device operating instructions. The
piston stroke pushes the ZAKO ring into the tube until
the remaining gap is between 1 mm and 5 mm wide
(see table).
Attention!
During the pre-assembly process the tube end must not
come into contact with the ZAKO ring. The remaining
gap must adhere to the specified widths.
Tube wall thickness Gap width
< 8 mm 1 to 1.5 mm
8 mm < 16 mm max. 3 mm
16 mm max. 5 mm
Flange
Yoke
plate
Pressure
plate Assembly
piston
Clamping jaws ZAKO ring
1 to max. 5 mm
(ZAKO LP 0.5 to 1 mm)
Final assembly of the flange connection
4.1 Clean the seal groove of the ZAKO ring and place
the O-ring carefully into the groove, making sure it is not
twisted.
4.2 Lubricate the threads of the screws.

431
7
1 4
3 2
A
C B
4.3 Press the pre-assembled flange connection onto the
surface to which it is to be bolted and screw it on hand-
tight. The tube must be stress-free and at right angles to
the screw on surface.
4.4 Then carefully tighten the securing screws diagonally
and evenly in several steps using a wrench. The flange
must be parallel to the connection surface. Should the
deviation from parallel during checking (measure at all
three points A, B and C) be greater than 0.5 mm, a
correction must be made with reassembly.
Attention!
Do not use pneumatic wrenches.
4.5 The final assembly is concluded by alternately
tightening up the diagonally opposed pairs of the 4
screws.
Attention!
Do not exceed the allowed tightening torques specified
for the screws (see table).
In the course of final assembly, the collar ring may be
pulled towards the tube end. It is possible that the gap
will then be closed (see item 3.4).
Dimension
[mm]
Screw tightening torque:
10.9 [Nm max.]*
ZAKO
M 8 35
M 10 69
M 12 120
M 14 190
M 16 295
M 20 580
M 24 800
M 30 1.500
ZAKO LP
M 8 14
M 10 28
M 12 49
M 16 135
M 20 275
* Nm = recommended final tightening torque for
cylindrical screws M 8 M 30 for a total coefficient of
friction of 0.14.

432
1 4
3 2
5
A
B C
Final assembly of the flange coupling
Note that one of the collar rings used must be a collar
ring without a seal groove.
5.1 Clean the seal groove of the ZAKO ring and place
the O-ring carefully into the groove, making sure it is not
twisted.
5.2 Lubricate the threads of the screws
5.3 Align the tube ends with the pre-assembled rings, fit
them together and screw in the connecting screws by
hand. The tubes must be perfectly aligned and must not
be under tension.
5.4 Then tighten up the screws manually, alternating
diagonally opposed pairs, in several stages. Ensure
that the flanges are parallel to one another. Correct the
screw tension if measurements (to be taken at all three
points A, B and C) show a deviation of more than 1 mm
from the parallel.
Attention!
Do not use pneumatic wrenches.
5.5 The final assembly is concluded by alternately
tightening up the diagonally opposed pairs of the four
screws.
Attention!
Do not exceed the allowed tightening torques specified
for the screws (see table).
In the course of final assembly, the ZAKO ring may be
pulled against the tube end. It is possible that the gap
will be closed (see item 3.4).
5.6 The same notes also apply to the ZAKO flange
couplings for SAE hose connections (see illustration).

433
7
6
7
Re-assembly
Clean the seal groove of the ZAKO ring, inspect the
condition of the O-ring and then put it back into the
groove carefully, making sure it is not twisted.
ZAKO flanges are easy to re-assemble. Follow all the
final assembly instruction steps when re-assembling a
flange connection or coupling.
Notes on subsequent inspections
Should setting make it necessary to retighten the
screws, the flange plate can be pulled up to 1mm before
the ZAKO ring while taking the parallel.
d
i
s
t
a
n
c
e

434
1 4
3 2
1
2
Notes
Pre-assembly and tube assembly processes for cutting
ring / flange connections are the same as described for
tube couplings (see the instructions for the correspond-
ing coupling variants).
Assembly of square flange coupling with
cutting ring or flared connection
Assembly of flange connecting pieces
Lubricate the O-ring and hexagon socket screws lightly
Clean the seal groove in the flange connecting piece and
carefully place the O-ring into it, then use the four cylin-
drical screws and spring washers to join the flange by
alternatingly tightening the diagonally opposed pairs of
screws, taking care not to exceed the specified torque.
Assembly instructions for flange couplings with cutting ring connection

435
7
Tightening torques
Screw
ISO 4762-8.8
1)
Tightening torque
Nm* -10 %
M 6 10
M 8 25
screws M 6 M 8 for a total coefficient of friction of
0.14.
Assemble the tube connection as described in the
corresponding VOSS assembly instructions.
1)
ISO 4762-8.8 (formerly DIN 912-8.8)

436
1 4
3 2
3
Assembly of SAE flange couplings
Assembly of flange connecting pieces
Lubricate the O-ring and hexagon socket screws lightly
Clean the seal groove in the flange connecting piece
and carefully place the O-ring into it, then use the four
screws and spring washers to join the flange halves by
alternatingly tightening the diagonally opposed pairs of
screws, taking care not to exceed the specified torque.
Tightening torque
Screw
ISO 4762-10.9
2)
Tightening torque
Nm* -10 %
M 8 25
M 10 50
M 12 85
M 14 135
M 16 210
screws M 8 M 16 for a total coefficient of friction of
0.14.
2)
ISO 4762-10.9 (formerly DIN 912-10.9)

437
7
1
2
Notes
These assembly instructions apply to adjustable
couplings with lock nuts to be screwed into threaded
holes as specified in:
n ISO 6149-1 metric fine thread and
n ISO 11926-1 UN/UNF-thread
Attention!
Before installing the coupling, check the thread and the
soft seal.
Assembly procedure
n Back off the lock nut as shown.
n Push the O-ring and the lock washer up to the top
end of the relieved section.
n Lubricate the O-ring and the threads lightly
n Screw the fitting in manually until the lock washer
rests on the mating surface.
n Turn the screw-in coupling back until it points in the
desired direction (but not by more than one turn).
n Hold the coupling with a spanner and tighten up the
lock nut.
Assembly instructions for adjustable couplings as specified in
ISO 6149 / 11926-1
Union nut
Lock washer
O-ring

438
3
Tightening torques
Series Thread Tightening torque
Nm -10 %
L M 10 x 1 15
L M 12 x 1.5 25
L M 14 x 1.5 35
L M 16 x 1.5 40
L M 18 x 1.5 45
L M 22 x 1.5 60
L M 27 x 2 100
L M 33 x 2 160
L M 42 x 2 210
L M 48 x 2 260
S M 12 x 1.5 35
S M 14 x 1.5 45
S M 16 x 1.5 55
S M 18 x 1.5 70
S M 22 x 1.5 100
S M 27 x 2 170
S M 33 x 2 310
S M 42 x 2 330
S M 48 x 2 420
Nm -10 %
L 7/16 - 20 UNF-2A 18
L 1/2 - 20 UNF-2A 28
L 9/16 - 18 UNF-2A 30
L 3/4 - 16 UNF-2A 50
L 7/8 - 14 UNF-2A 60
L 1 1/16 - 12 UN-2A 95
L 1 3/16 - 12 UN-2A 120
L 1 5/16 - 12 UN-2A 150
L 1 5/8 - 12 UN-2A 200
L 1 7/8 - 12 UN-2A 260
S 7/16 - 20 UNF-2A 20
S 1/2 - 20 UNF-2A 30
S 9/16 - 18 UNF-2A 35
S 3/4 - 16 UNF-2A 70
S 7/8 - 14 UNF-2A 100
S 1 1/16 - 12 UN-2A 170
S 1 5/16 - 12 UN-2A 270
S 1 5/8 - 12 UN-2A 285
S 1 7/8 - 12 UN-2A 325

439
7
1
2
Notes
These assembly instructions apply to adjustable
couplings with lock nuts to be screwed into threaded
holes as specified in:
n ISO 9974-1 metric fine thread, cylindrical
n ISO 1179-1 Whitworth pipe thread, cylindrical
Attention!
Before installing the coupling, check the thread and the
soft seal.
Assembly instructions for adjustable elbow couplings with lock nut
Assembly procedure
n Lubricate the O-ring and threads lightly
n Screw the coupling into the threaded hole manually
until the lock nut (with the PEFLEX moulded seal) is
in contact with the mating surface.
n Turn the coupling (by not more than one turn in the
opposite direction) until it points in the desired
direction.
n Hold the stud with a spanner and tighten up the lock
nut, taking care not to exceed the specified torque.
Union nut
PEFLEX
moulded seal

440
3
Tightening torques
Nm -10 %
L G 1/8 20
L G 1/4 50
L G 3/8 80
L G 1/2 105
L G 3/4 190
L G 1 250
L G 1 1/4 400
L G 1 1/2 500
Nm -10 %
S G 1/4 50
S G 3/8 80
S G 1/2 110
S G 3/4 220
S G 1 280
S G 1 1/4 400
S G 1 1/2 500

441
7
1
2
Notes
Assembly preparation of flared adapters
2.1 Lubricate the O-ring lightly (e.g. using mineral-oil
based hydraulic fluid HLP32).
2.2 Preferably, the flare adapter should be pressed into
the tube with the aid of a vice (when doing so, protect
the threaded parts against damage). However, as an
alternative, the flare adapter can be loosely inserted into
the coupling stud.
Assembly instructions for 37 flare adapters

442
L
3
Tube preparation
3.1 Determine the tube dimensions with the aid of the
dimension table (also refer to item 5).
Series Tube
OD
[mm]
s [mm] L [mm] D
min.
[mm]
D
approx.
[mm]
L/S 6 1 3.5 9.1 10
1.5 2.5
L/S 8 1 4 11.3 12
1.5 3
2 2.5
L/S 10 1 4.5 13.1 14
1.5 3.5
2 2.5
L/S 12 1 4.5 15.3 16
1.5 3.5
2 2.5
Series Tube
OD
[mm]
s [mm] L [mm] D
min.
[mm]
D
approx.
[mm]
L 15 1.5 4.5 19.1 20
2 3.5
2.5 2.5
L 18 1.5 5.5 23.2 24
2 4.5
2.5 4
L 22 1.5 5.7 26.5 27.5
2 4.7
2.5 3.7
3 3.2
L 28 2 5.7 32.7 33.3
2.5 4.7
3 4.2
L 35 2 6.5 41.8 42.7
2.5 6
3 5
4 3.5
L 42 2 7 48.8 49.8
3 6.5
4 5
S 14 1.5 5.5 18.6 19.6
2 5
2.5 4
3 3
S 16 1.5 6.5 20.6 22
2 5.5
2.5 5
3 4
S 20 2 7 25.6 26.8
2.5 6
3 5
3.5 4
S 25 2 7 31.1 33
2.5 6.5
3 5.5
4 4
S 30 2 9 37 38.7
2.5 8
3 7.5
4 5.5
5 4
S 38 2.5 10 46 47.2
3 9.5
4 8
5 6
6 7.5 48

443
7
0,2
4
3.2 Cut tubes at right angles. An angle tolerance of
cutter.
3.3 Deburr the inner and outer edges of the tube ends
slightly and clean the tubing.
Attention!
Burrs on the outside and inside tube diameter can impair
the flaring process. Tubes which are not cut off squarely
and correctly deburred may reduce the service life and
leak-tightness of the couplings.
Pre-assembly of tube flare
Push the union nut and the supporting sleeve onto the
tube. Use the standard pre-assembly devices to flare the
tube end.
max. 1
Union nut Tube Supporting
sleeve

444
37
s
D
5
6
Checking the tube flare
For the connection to fulfil its purpose sustainably, the
tube flare must be smooth and free of fissures and
scratches.
See the dimension table in item 3 for the respective
outer diameter (D
min
and D
max
) of the flare bell.
Attention!
Failure to keep within the dimension tolerances will
impair the connection considerably.
Final assembly
6.2 Final assembly with pressed-in flare adapter:
Use a spanner to tighten up the union nut until a
distinctly increased torque is felt.
Continue tightening by approximately 1/2 turns
(for L6 L12, only approx. 1/4 turns).
Check the diameter
approx. 1/2 turns
approx. 1/4 turns L6 L12
approx. 1/2 turns
T
u
b
e

O
D

445
7
approx. 1/2 turns
approx. 1/2 turns
6.3 Final assembly with flare adapter inserted in
connecting piece:
Use the union nut and a spanner to press the flare
adapter into the connecting piece until it rests against
the stop.
6.4 Unscrew the connection and check whether the flare
adapter has reached the stop.
The re-tightening by approximately 1/2 turns
Tighten the union nut with a spanner up to noticeable
increse in force.
Then re-tighten by approximately 1/2 turns
O-ring Flare collar
Check the O-ring and the flare collar

446
7
6.6 Final assembly with tightening torque
As an alternative to achieving pre-assembly and final
tightening torques can be applied directly. The stated
tightening torques are guideline values:
Series Tube
OD
[mm]
Tightening torque
Steel
Nm 5 %
Tightening torque
Stainless steel 1.4571
Nm 5 %
L 6 20 30
L 8 40 55
L 10 45 65
L 12 55 110
L 15 70 190
L 18 120 250
L 22 200 400
L 28 300 550
L 35 600 900
L 42 800 900
S 6 30 85
S 8 45 100
S 10 55 130
S 12 80 190
S 14 90 260
S 16 130 330
S 20 250 350
S 25 400 700
S 30 500 900
S 38 800 900
Re-assembly of connections
Every time the tube connection is taken apart, the O-ring
must be carefully checked for damage and, if necessary,
replaced. The tube flaring must also be cleaned and
checked (see item 5).
To re-assemble the connection, tighten the union nut as
described in item 6.
O-ring Flare collar
Check the O-ring and the flare collar

447
7
1
2
Notes
These assembly instructions apply to the use of tube
blanking screws (sealing plugs) for threaded holes as
specified in:
n DIN 3852-1 / ISO 9974-1
thread: Metric fine thread, cylindrical
n DIN 3852-2 / ISO 1179-1
thread: Whitworth pipe thread, cylindrical
n Identification feature: tube blanking screws (sealing
plugs) of form N with Whitworth pipe threads have
an identification groove.
If the blanking screws or connections are to fulfil their
purpose, it is important to adhere exactly to the assem-
bly instructions. Wrong handling creates risks with
regard to safety and leakages and may lead to complete
failure of the connection or seal.
Attention!
Before application, check the thread and the soft seal.
Assembly procedure
n Set the torque wrench to the torque specified for
the respective component design and size in the
following table.
n Lubricate the seal ring and the threads lightly
n Check the threads for damage.
n Screw the blanking screw (sealing plug) by hand into
the threaded hole until its head is on the mating
surface.
n Tighten up the blanking screw (sealing plug) to the
specified final torque.
Assembly instructions for tube blanking screws
sealed with PEFLEX moulded seal rings
Form N PEFLEX
moulded seal
Form V PEFLEX
moulded seal
Tube blanking screws
(sealing plugs) of form
N with Whitworth pipe
threads have an
identification groove.

448
3
Tightening torques
Thread Form Tightening torque
Nm -10 %
M 8 x 1 N 10
M 10 x 1 N 12
M 10 x 1 V 12
M 12 x 1,5 N 23
M 14 x 1,5 N 30
M 14 x 1,5 V 30
M 16 x 1,5 N 50
M 18 x 1,5 N 65
M 18 x 1,5 V 65
M 20 x 1,5 N 75
M 22 x 1,5 N 90
M 24 x 1,5 N 90
M 26 x 1,5 N 110
M 27 x 2 N 130
M 33 x 2 N 225
M 33 x 2 V 250
M 42 x 2 N 310
M 42 x 2 V 400
M 48 x 2 N 380
M 48 x 2 V 500
Thread Form Tightening torque
Nm -10 %
G 1/8 N 12
G 1/4 N 25
G 3/8 N 50
G 1/2 N 70
G 3/4 N 120
G 1 N 200
G 1 V 250
G 1 1/4 N 320
G 1 1/4 V 400
G 1 1/2 N 400
G 1 1/2 V 500
Attention!
The recommended tightening torques relate to steel
couplings with VOSScoat surface coating and which
are screwed into components made of steel with a ten-
sile strength of 350 N/mm. If other values for tensile
strength, modulus of elasticity and friction-surface
combinations are used, the user must adapt the
tightening torques empirically.

449
7
General technical notes
Technical notes
Seal types and threaded bores

451
8
Technical notes
P.455
Pressure calculations for hydraulic
tubes of steel and stainless steel
P.457
Coupling system pressure ratings
P.461
Additional information
Resistance to media,
temperatures and pressure
P.462
Pressure reduction factors and
temperatures
P.463
Overview of standard threads of
VOSS 24 coupling components
P.464
Seal types and threaded bores
P.465
Content Type/Page

452
Additional lengths when designing
tube assemblies
P.468
Calculating the equivalent straight
tube length
P.469
VOSS cutting ring systems in
applications using polyamide
tubing
P.470
VOSS coat
P.471
VOSS fittings resistance to
aggressive media
P.477
Materials of the soft seals
(elastomers)
P.478
Ozone resistance of elastomer
seals
P.479
Content Type/Page

453
8
System comparison
requirements / system features
P.480
Preventing faults and correcting
malfunctions
2S / 2SVA 2S plus ES-4 / ES-4VA VOSSForm BV-10
P.483 P.486 P.489 P.492 P.493
ZAKO DKO VOSS 24 cou-
plings
P.495 P.496 P.497
Content Type/Page

454
Technical notes
General safety notes
n The couplings, anges, valves and other components
listed in the catalogue are intended for uid engineering
applications only. They cover a range of operating
conditions from normal to extreme.
n In order to ensure maximum performance and func-
tional reliability of VOSS products, the respective
assembly instructions, operating conditions and tube
recommendations have to be adhered to. Failure to
follow these instructions may impair the function and
lead to loss of claims under guarantee.
n Coupling elements must not be tightened or loosened
while the system is under pressure. Caution, this
in volves a potential risk to life and limb!
n Piping and tubing lines are to be designed and routed
in such a way that they are not under tension in the
unassembled state and that all connecting elements
can be easily assembled.
n Always make sure that hydraulic components are
clean and are handled in a clean environment.
Contamination, dirt or damage can impair the function
of individual components or of the entire hydraulic
system.
n When using lubricants, observe the instructions and
information given by the manufacturer.
n When using VOSS pre-assembly machines/devices and
tools, always observe the operating instructions. Failure
to observe these instructions may endanger life and
limb and/or the environment.
Standardization
In terms of design and dimensions, VOSS cutting ring tube
couplings, VOSSForm
SQR
tube couplings, ared couplings
and anges all conform to the latest version of standard
DIN 2353/ISO 8434-1/DIN 3861/SAE J 518 C.
Permitted pressures
The pressure ratings stated in the VOSS catalogue are as
follows:
n The nominal pressure (PN) species the maximum
operating pressure of the coupling. This is the maxi-
mum pressure that should be applied when operating
the system or the system section under stationary
conditions. During load tests, the bursting pressure
of the specimen must be at least 4 times the nominal
pressure.
n Permissible operating pressure (PB) as dened in
DIN 2401 part 1. The operating pressure (Betriebs-
berdruck" - PB) data are stated for normal operating
conditions (at 120 C, static load) for a safety factor of
2.5.
For the tube-end cutting-ring connections, VOSSFormSQR
or ared connection, the safety factor is always four.
Always observe the pressure information for the entire
article. If tube couplings are subjected to greater loads
e.g. temperatures above +120 C, strong pressure peaks
etc. the operating pressure must be reduced in order to
retain the same safety level.
It is assumed that the tubing system is rmly installed
and held by tube clamps/supports in order to achieve the
required functional reliability. The recommended torque
moments are to be used for articles with threaded stud
connections. The specied pressure values always refer to
VOSS coupling components. In the case of tubing, observe
the pressure values stated by the respective tube manu-
facturer.
Permissible operating temperatures
Coupling and ange materials
For all steel coupling and ange parts listed in this cata-
logue, an operating temperature range of -40 C to +120
C is permissible (cf. DIN 3859 part -1). If the temperature
limits are exceeded, the pressure has to be decreased
accordingly.

455
8
Seal materials
Standard seals of NBR (e. g. Perbunan
)
n For couplings and ared cones:
70 to 80 Shore A
n For ZAKO rings 90 Shore A
n Temperature range -35 C to +100 C
Seals of FKM/FPM e. g. Viton
upon request
n For screw couplings, ared cones and ZAKO rings
75 - 85 Shore A
n Temperature range -25 C to +200 C
The notes given in DIN 7716 (rubber products; require-
ments for storage, cleaning and maintenance) must be
observed when using elastomer seals. w
n Dry storage at temperatures not exceeding + 25C
n Protect against direct sunlight, ozone and strong
articial lighting
Materials
In the standard version, VOSS cutting rings, VOSSForm
SQR
,
ared couplings, valves and anges are made of forged
or drawn steel and, in exceptional cases, of cast steel, in
accordance with the technical delivery conditions as speci-
ed in DIN 3859-1.
Surface protection
All VOSS tube connections are given a VOSS coat surface
nish by default in order to protect them from corrosion.
The only exceptions are articles whose function or normal
market standard do not allow a VOSS coat nish (e. g.
weld tube connection stubs).
VOSS coat corrosion prevention is based on a zinc-nickel
base coat, a passivation layer and normally a top sealing
coat.
The union nuts are also given a coating of lubricant/slip
agent.
ZAKO ange connections have surfaces protected either by
pickling and oiling or by a VOSS coat.
The parts intended for welding are shiny and oiled.
Upon request, versions made of other materials and with
other surface nishes can be supplied.
Viton
is a registered trademark of E. I. du Pont de Nemours and Company.

Perbunan
is a registered trademark of LANXESS Deutschland GmbH.

Standards applied
Couplings
National International
Cutting ring couplings DIN 2353 ISO 8434-1
Cutting rings DIN 3861 ISO 8434-1
Conical seal couplings ISO 8434-1
Flange SAE J 518 C / ISO 6162-1
Standards applied
Threaded studs/Threaded holes
Threaded stud ends
National / International
Threaded hole
National / International
Metric ne thread
Sealing by DIN 7603 seal ring (form A) DIN 3852-1 DIN 3852-1 Form X
Sealing by seal edge (form B) DIN 3859-1/ ISO 9974-3 ISO 9974-1
Sealing by taper thread (form C) DIN 3852-1 DIN 3852-1 Form Z
Sealing by PEFLEX ring (form E) ISO 9974-2 ISO 9974-1
Sealing by O-ring ISO 6149-2 / ISO 6149-3 ISO 6149-1
Whitworth pipe thread /
UN-UNF / NPT
Sealing by DIN 7603 seal ring (form A) DIN 3852-2 DIN 3852-2 Form X
Sealing by seal edge (form B) ISO 1179-4 ISO 1179-1
Sealing by taper thread (form C) DIN 3852-2 DIN 3852-2 Form Z
Sealing by taper thread (NPT) ANSI/ASME B 1.20.1-1983 ANSI/ASME B 1.20.1-1983
Sealing by PEFLEX ring (form E) ISO 1179-2 ISO 1179-1
Sealing by O-ring (UN-UNF) ISO 11926-2/-3 / SAE J 514 ISO 11926-1 / SAE J 514

456
Calculation equations applied:
Load case I mainly static:

Design calculation pressure p =
Load case III pulsating

Design calculation pressure p =
Calculation equations applied:
K = 235/225* K = 355/345* K = 245 K = 225 K = 230 K = 190
S = 1,5 S = 1,58 S = 1,5 S = 1,5 S = 1,5 S = 1,5
C1 = 0,9 C1 = 0,9 C1 = 0,9 C1 = 0,9 C1 = 0,9 C1 = 0,9
C1 = factor to take thinner wall thicknesses into consideration (chosen: 10 %)
Burst pressure calculation in accordance with ISO 10763
Calculation equation: 388 530 468
burst pressure Pb = Rm ln Assumed Rm values
With the assumed Rm values, deviations of < 10 % compared with the measured values were achieved
(with E 235 and 1.4571).
The pressures stated here are based on calculations
carried out in accordance with DIN 2413 and ISO 10763.
These calculations were carried out assuming the following
boundary conditions for straight tubes and do not take into
consideration any special conditions of a real hydraulic
system. They are therefore only intended to assist in pre-
liminary selection and do not release the user from his
obligation to carry out own design calculations. The scope
of application of the respective standard shall also be
observed.
20 K T C1
S Da
20 K T C1
S (Da+T C1)
Da
Di
Pressure calculations for hydraulic tubes of steel and stainless steel

457
8
Hydraulic tubes of E235 steel (formerly St37.4) or E355 steel (formerly St52.4) and stainless steel 1.4571:
pressure calculations as described in DIN 2413
Tube dimensions VOSS nominal
pressure
Design calculation pressures in accordance with
DIN 2413 [bar]
Bursting pressure [bar]
Da
[mm]
Di
[mm]
T
[mm]
L-series
[bar]
S-series
[bar]
Load case I
(idle, up to +120C)
Load case III
(pulsating, up to +120C)
calculated in accordance
with ISO 10763
E235 E355 1.4571 E235 E355 1.4571 E235 E355 1.4571
6 4.5 0.75 500 800 338 491 368 303 310 256 1116 1525 1346
6 4 1 500 800 450 655 490 391 400 330 1573 2149 1898
6 3 1.5 500 800 675 983 735 551 563 465 2689 3674 3244
6* 2 2 500 800 900 1310 980 692 708 585 4263 5823 5142
6* 1.5 2.25 500 800 1013 1474 1103 757 774 639 5379 7347 6488
8 6 1 500 800 338 491 368 303 310 256 1116 1525 1346
8 5 1.5 500 800 506 737 551 433 443 366 1824 2491 2200
8 4 2 500 800 675 983 735 551 563 465 2689 3674 3244
8* 3 2.5 500 800 844 1228 919 659 673 556 3806 5198 4590
10 8 1 500 800 270 393 294 248 253 209 866 1183 1044
10 7 1.5 500 800 405 590 441 357 365 301 1384 1890 1669
10 6 2 500 800 540 786 588 458 468 386 1982 2707 2391
10 5 2.5 500 800 675 983 735 551 563 465 2689 3674 3244
10* 4 3 500 800 810 1179 882 638 652 539 3555 4856 4288
12 10 1 400 630 225 328 245 209 214 177 707 966 853
12 9 1.5 400 630 338 491 368 303 310 256 1116 1525 1346
12 8 2 400 630 450 655 490 391 400 330 1573 2149 1898
12 7 2.5 400 630 563 819 613 474 484 400 2091 2857 2523
12 6 3 400 630 675 983 735 551 563 465 2689 3674 3244
12* 5 3.5 400 630 823 1180 858 624 638 527 3397 4640 4097
12* 4 4 400 630 940 1348 980 692 708 585 4263 5823 5142
14 12 1 630 193 281 210 181 185 153 598 817 721
14 11 1.5 630 289 421 315 264 270 223 936 1278 1129
14 10 2 630 386 561 420 342 349 289 1306 1783 1575
14 9 2.5 630 482 702 525 415 425 351 1714 2342 2068
14 8 3 630 579 842 630 485 496 410 2171 2966 2619
14 7 3.5 630 705 1011 735 551 563 465 2689 3674 3244
15 13 1 400 180 262 196 170 174 143 555 758 670
15 12 1.5 400 270 393 294 248 253 209 866 1183 1044
15 11 2 400 360 524 392 321 329 271 1203 1644 1452
15 10 2.5 400 450 655 490 391 400 330 1573 2149 1898
15 9 3 400 540 786 588 458 468 386 1982 2707 2391
16 14 1 630 169 246 184 160 163 135 518 708 625
16 13 1.5 630 253 368 276 233 239 197 806 1100 972
16 12 2 630 338 491 368 303 310 256 1116 1525 1346
16 11 2.5 630 422 614 459 370 378 312 1454 1986 1754
16 10 3 630 506 737 551 433 443 366 1824 2491 2200
16 8 4 630 705 1011 735 551 563 465 2689 3674 3244
18 16 1 400 150 218 163 143 146 121 457 624 551
18 15 1.5 400 225 328 245 209 214 177 707 966 853
18 14 2 400 300 437 327 273 279 230 975 1332 1176
18 13 2.5 400 375 546 408 333 341 281 1263 1725 1523
18 12 3 400 450 655 490 391 400 330 1573 2149 1898
18 10 4 400 627 899 653 500 511 422 2281 3115 2751

458
20 17 1.5 420 203 295 221 190 194 160 631 861 761
20 16 2 420 270 393 294 248 253 209 866 1183 1044
20 15 2.5 420 338 491 368 303 310 256 1116 1525 1346
20 14 3 420 405 590 441 357 365 301 1384 1890 1669
20 13 3.5 420 494 708 515 408 417 345 1671 2283 2016
20 12 4 420 564 809 588 458 468 386 1982 2707 2391
20 10 5 420 705 1011 735 551 563 465 2689 3674 3244
22 20 1 250 123 179 134 118 121 100 370 505 446
22 19 1.5 250 184 268 200 173 177 146 569 777 686
22 18 2 250 245 357 267 227 232 192 779 1064 939
22 17 2.5 250 307 447 334 278 285 235 1000 1366 1207
22 16 3 250 368 536 401 328 335 277 1236 1688 1490
22 15 3.5 250 449 643 468 376 384 317 1486 2030 1792
22 14 4 250 513 735 535 422 431 356 1754 2396 2115
25 22 1.5 420 162 236 176 154 157 130 496 678 598
25 21 2 420 216 314 235 201 206 170 676 924 816
25 20 2.5 420 270 393 294 248 253 209 866 1183 1044
25 19 3 420 324 472 353 292 299 247 1065 1455 1284
25 18 3.5 420 395 566 412 336 343 283 1275 1741 1537
25 17 4 420 451 647 470 378 386 319 1496 2044 1805
25 16 4.5 420 508 728 529 418 428 353 1732 2365 2089
25 15 5 420 564 809 588 458 468 386 1982 2707 2391
28 25 1.5 250 145 211 158 138 141 117 440 601 530
28 24 2 250 193 281 210 181 185 153 598 817 721
28 23 2.5 250 241 351 263 223 228 188 763 1043 921
28 22 3 250 289 421 315 264 270 223 936 1278 1129
28 21 3.5 250 353 506 368 303 310 256 1116 1525 1346
28 20 4 250 403 578 420 342 349 289 1306 1783 1575
30 26 2 420 180 262 196 170 174 143 555 758 670
30 25 2.5 420 225 328 245 209 214 177 707 966 853
30 24 3 420 270 393 294 248 253 209 866 1183 1044
30 23 3.5 420 329 472 343 285 291 241 1031 1408 1243
30 22 4 420 376 539 392 321 329 271 1203 1644 1452
30 20 5 420 470 674 490 391 400 330 1573 2149 1898
30 18 6 420 564 809 588 458 468 386 1982 2707 2391
35 32 1.5 250 121 173 126 111 114 94 348 475 419
35 31 2 250 161 231 168 147 150 124 471 643 568
35 30 2.5 250 201 289 210 181 185 153 598 817 721
35 29 3 250 242 347 252 215 220 181 730 997 880
35 27 4 250 322 462 336 280 286 236 1007 1375 1215
35 25 5 250 403 578 420 342 349 289 1306 1783 1575
38 34 2 420 148 213 155 136 139 115 432 589 521
38 33 2.5 420 186 266 193 168 171 142 547 748 660
38 32 3 420 223 319 232 199 203 168 667 911 804
38 30 4 420 297 426 309 260 265 219 917 1253 1106
38 28 5 420 371 532 387 318 325 268 1185 1619 1429
38 26 6 420 445 639 464 373 382 315 1472 2011 1776
38 24 7 420 519 745 542 427 436 360 1783 2436 2151
38 22 8 420 594 851 619 478 488 404 2121 2897 2558
42 39 1.5 250 101 144 105 93 96 79 288 393 347
42 38 2 250 134 193 140 123 126 104 388 530 468
42 37 2.5 250 168 241 175 153 156 129 492 672 593
42 36 3 250 201 289 210 181 185 153 598 817 721
42 34 4 250 269 385 280 237 242 200 820 1120 989
42 32 5 250 336 481 350 290 297 245 1441 1273
* DIN 2413 no longer applies to these tubes (because od/id > 2.0)
Tube dimensions VOSS nominal
pressure
Design calculation pressures in accordance with
DIN 2413 [bar]
Bursting pressure [bar]
Da
[mm]
Di
[mm]
T
[mm]
L-series
[bar]
S-series
[bar]
Load case I
(idle, up to +120C)
Load case III
(pulsating, up to +120C)
calculated in accordance
with ISO 10763

459
8
Dimensions
The dimensions given in the catalogue have been adapted
to currently valid standards. We reserve the right to make
changes due to technical advances and developments.
Patents
We make reference here to our patents at home and
abroad, as well as our registered designs, trade marks and
intellectual property applications.
Approvals
For approvals, see Chapter 9.
Tightening torques for threads
The recommended tightening torques refer to steel threads
with VOSS coat surface nish and a steel mating material
with a breaking stress of 350 N/mm.
Steel threads with increased pressure level require a mating
material with a breaking stress of 600 N/mm.
If other values for strength, modulus of elasticity and
friction-surface combinations are used, the user must adapt
the tightening torques empirically.
VOSS notes, operating instructions and assembly
in structions are to be followed in order for the parts to full
their proper function.
The recommended tightening torques have to be adhered
to if the pressure range is to be fully utilized and the
appropriate safety level is to be maintained.
The tightening torques for the threads are given in the
tables for the respective type of thread.
Recommended steel tubes
The following table contains recommendations for the tube
connections listed in the catalogue.
The values in the table refer to DIN 2413 class III dynamic
loads at up to 120 C and tube material 1.0255+N, without
corrosion factor supplement.
There are a number of different German and international
standards concerning calculation of the required dimen-
sions of tubes under internal pressure.
We recommend standard DIN EN 13480-3, which explains
the various load cases in great detail.
Specications concerning permissible steel tubes:
Seamless, cold-drawn and normalized precision steel
tubing as specied in DIN EN 10305-4, material E235+N,
mat. no. 1.0308+N or E355, mat. no. 1.0580. The tubes
must be ordered by specifying the outer diameter and the
inner diameter.
Specications concerning permissible stainless steel
tubes:
Seamless cold-drawn and solution-annealed, scale-free
stainless-steel tubes in CFA or CFD delivery condition of
dimensions and tolerances in accordance with DIN EN
10305-1 and all other delivery conditions as specied in
DIN EN 10216-5, material X6CrNiMoTi17-12-2, mat. no.
1.4571. The tubes must be ordered by specifying the outer
diameter and the inner diameter.
To stabilize the connections, thin-walled steel tubes must
be tted with reinforcing internal sleeves.
Media resistance
VOSS cutting ring couplings, VOSSForm
SQR
tube couplings,
ared couplings and anges are designed for use with nor-
mal commercially available hydraulic uids at temperatures
of up to +100 C and compressed air at temperatures up
to +80 C.
If use with critical media such as low-ammability pressure
uids is intended, please consult our customer service
department.
Orders
All articles described in this catalogue are delivered as
depicted in the catalogue. Items are delivered in closed
package units to facilitate warehousing and to protect them
from dirt and damage.
Orders should be matched to the contents of the respec-
tive package units. The number of items in the individual
package units are stated in the currently valid price list.
If you require smaller quantities, i. e. less items than are
contained in one package unit, we recommend that you
purchase these from one of our dealers.
The general terms and conditions stated at www.voss.net
apply to all business dealings.
Service for customers
Let our customer service department advise you. Simply
contact our sales department or a member of our eld
service.

460
Coupling system pressure ratings
Nominal pressure (PN)
The nominal pressure species the maximum operating pressure of the coupling. This is the maximum envisaged pressure
when the system or the system section is operated under stationary conditions. During load tests, the bursting pressure of
the specimen must be at least 4 times the nominal pressure.
Series 2S 2S plus ES-4 BV-10 VOSSForm
SQR
PN PN PN PN PN
L 6
315
500 500 500 L 8 500
L 10
L 12
400 400 400 400 L 15
L 18
L 22
160 250 250 250 250
L 28
L 35
L 42
S 6
630
800 800 800 800 S 8
S 10
S 12
630 630 630 630 S 14
S 16
400
S 20
420 420 420 420
S 25
S 30
S 38 315

461
8
Additional information
Resistance to media, temperatures and pressure
Temperature resistance of seals
Pressure uids VOSS NBR VOSS FPM/FKM
HL, HLP, HVLP -35 C up to +100 C -25 C up to +200 C
4)
HTG, HETG (rapeseed oils) up to +80 C
1)
up to +100 C
HEPG (Polyalkylene glycols)
5)
up to +80 C
2)
up to +120 C
HEES (synthetic ester oils) up to +80 C
3)
up to +120 C
permitted operating temperature
permitted ambient temperature for hydraulic applications
temperature not permitted
1)
When rapeseed oil is used, even the lowest water content (0.5 %) can destroy the usability of the seals.
2)
Depending on the quality of the oil, the seals may swell excessively and their exibility under cold conditions may be
reduced.
3)
The wide range of HEES oils available means that the swelling rates differ considerably. General compatibility cannot be
guaranteed in all cases.
4)
For steel coupling components, the temperature range is -40 C to +120 C. Observe the operating range of the
hydraulic uid e. g. the ash point of HVLP is +125 C
5)
HEPG can only be used at up to +80 C
Pressure reduction factors and temperatures
Seal durability with hydraulic uids
Viton

Perbunan

Pressure reduction
factors within permitted
operating temperatures
in C
Material
steel couplings stainless-steel (1.4571)
couplings
Seals of NBR
(e. g. Perbunan
)
Seals of FPM/FKM
(e. g. Viton
)
-60
0 %
-50
-40
0 %
-35
0 %
-25
0 %
+20
+50 4 %
+100 11 %
+120
14 %
+150 10 %
+175 15 %
18 %
+200 20 %
+250 29 %
28 %
+300
+400 33 %

462
Permitted pressures
The pressure ratings stated in the VOSS catalog are as
follows:
n The nominal pressure (PN) species the maximum
operating pressure of the coupling. This is the maxi-
mum intended pressure when operating the system or
the system section under stationary conditions. During
load tests, the bursting pressure of the specimen must
be at least 4 times the nominal pressure.
n Permissible operating pressure (PB) as dened in
DIN 2401 part 1. The operating pressure (Betriebs-
berdruck - PB) data are stated for normal operating
conditions (at +120 C, static load) and a safety factor
of 2.5.
At higher temperatures, the pressures must be reduced to
below those stated in the catalog by a factor depending
on the materials used. The intended operating temperature
must be taken into consideration when selecting coupling
and seal materials.
Calculation example:
Coupling:
VOSSForm
SQR
tube OD S 10 = 800 bar nominal pressure
Temperature:
+150 C
Material:
steel
Pressure reduction factor (see table):
10 %
Formula:
PN (coupling at +150 C)
= x (100 % - 10 %) = 720 bar
Pressure reduction factors and temperatures
800 bar
100 %
Caution!
When selecting tubes, please observe the pressure
reduction factors stated by the tube manufacturers.

463
8
Overview of standard threads of VOSS 24 coupling components
In addition to the standard dimensions as specied in ISO 8434-1, other male part thread sizes are available. Detailed
dimension information is given on the respective pages of the catalogue.
* Tube size S14 is no longer covered by the applicable standards.
Metric thread [ M ] Imperial thread [ G ]
Male Union nut
Series Tube-OD Whitworth pipe
thread
Width across
ats
Metric ne
thread
Width across
ats
Metric ne
thread
Width across
ats
LL 4 G 1/8 10 M 8 x 1 10 M 8 x 1 10
LL 5 G 1/8 11 M 8 x 1 11 M 10 x 1 12
LL 6 G 1/8 11 M 10 x 1 11 M 10 x 1 12
LL 8 G 1/8 12 M 10 x 1 12 M 12 x 1 14
L 6 G 1/8 14 M 10 x 1 14 M 12 x 1.5 14
L 8 G 1/4 19 M 12 x 1.5 17 M 14 x 1.5 17
L 10 G 1/4 19 M 14 x 1.5 19 M 16 x 1.5 19
L 12 G 3/8 22 M 16 x 1.5 22 M 18 x 1.5 22
L 15 G 1/2 27 M 18 x 1.5 24 M 22 x 1.5 27
L 18 G 1/2 27 M 22 x 1.5 27 M 26 x 1.5 32
L 22 G 3/4 32 M 26 x 1.5
(ISO 6149 =
M 27 x 2)
32 M 30 x 2 36
L 28 G 1 41 M 33 x 2 41 M 36 x 2 41
L 35 G 1 1/4 50 M 42 x 2 50 M 45 x 2 50
L 42 G 1 1/2 55 M 48 x 2 55 M 52 x 2 60
S 6 G 1/4 19 M 12 x 1.5 17 M 14 x 1.5 17
S 8 G 1/4 19 M 14 x 1.5 19 M 16 x 1.5 19
S 10 G 3/8 22 M 16 x 1.5 22 M 18 x 1.5 22
S 12 G 3/8 22 M 18 x 1.5 24 M 20 x 1.5 24
S 14 * G 1/2 27 M 20 x 1.5 27 M 22 x 1.5 27
S 16 G 1/2 27 M 22 x 1.5 27 M 24 x 1.5 30
S 20 G 3/4 32 M 27 x 1.5 32 M 30 x 2 36
S 25 G 1 41 M 33 x 2 41 M 36 x 2 46
S 30 G 1 1/4 50 M 42 x 2 50 M 42 x 2 50
S 36 G 1 1/2 55 M 48 x 2 55 M 52 x 2 60

464
DIN 3852
4 - - M 8 x 1 12 13 1 8
6 / 8 6 - M 10 x 1 14 20 15 13.9 1 8
- 8 6 M 12 x 1.5 17 25 18 16.9 1.5 12
- 10 8 M 14 x 1.5 19 25 20 18.9 1.5 12
- 12 10 M 16 x 1.5 21 28 23 21.9 1.5 12
- 15 12 M 18 x 1.5 23 30 25 23.9 2 12
- - 14 M 20 x 1.5 25 34 27

25.9 2 14
- 18 16 M 22 x 1.5 27 34 28 26.9 2.5 14
- 22 - M 26 x 1.5 31 42 33 31.9 2.5 16
- - 20 M 27 x 2 32 42 33 31.9 2.5 16
- 28 25 M 33 x 2 39 47 41 39.9 2.5 18
- 35 30 M 42 x 2 49 56 51 49.9 2.5 20
- 42 38 M 48 x 2 55 65 56 54.9 2.5 22
ISO 6149
- 6 - M 10 x 1 14.5 16 11.1 13.8 1 10 1.6 12
- 8 6 M 12 x 1.5 17.5 19 13.8 16.8 1.5 11.5 2.4 15
- 10 8 M 14 x 1.5 19.5 21 15.8 18.8 1.5 11.5 2.4 15
- 12 10 M 16 x 1.5 22.5 24 17.8 21.8 1.5 13 2.4 15
- 15 12 M 18 x 1.5 24.5 26 19.8 23.8 2 14.5 2.4 15
- 18 16 M 22 x 1.5 27.5 29 23.8 26.8 2 15.5 2.4 15
- 22 20 M 27 x 2 32.5 34 29.4 31.8 2 19 3.1 15
- 28 25 M 33 x 2 41.5 43 35.4 40.8 2.5 19 3.1 15
- 35 30 M 42 x 2 50.5 52 44.4 49.8 2.5 19.5 3.1 15
- 42 38 M 48 x 2 55.5 57 50.4 54.8 2.5 22 3.1 15
1)
0.1 M 22 x 1.5
0.2 M 26 x 1.5
Seal types and
threaded bores
for VOSS tube couplings
Male thread:
metric ne thread, cylindrical
Standard PEFLEX and O-ring
seals are of NBR,
-35 C to +100 C
FPM/FKM seals for
-25 C to +200 C
Threaded tube
connection stubs
DIN 3852-1 form A
(sealed with DIN 7603
sealing ring)
Threaded tube
connection stubs
DIN 3852-1
form B/ISO 9974-3
(sealed by sealing
edge)
Threaded tube
connection stubs
form E/ISO 9974-2
(sealed with PEFLEX
sealing ring)
Threaded tube
connection stubs
form ISO 6149-2
and -3 (sealed with
O-ring)
Threaded bore
DIN 3852 part -1 form X/ISO 9974-1
(for cylindrical stud ends)
Threaded hole
ISO 6149-1
Tube OD d1 d3 d4 d4 (wide) d4 d5 d7 d8 a1 b1 L1 Z
LL L S (d6) +0.4 +0.4 min. +0.1 0.2 max. min. +0.4 1

465
8
DIN 3852
4 - 8 6 - G 1/8 A 14 19 15 13.9 1 8
- 8 / 10 6 / 8 G 1/4 A 18 25 20 18.9 1.5 12
- 12 10 / 12 G 3/8 A 22 28 23 21.9 2 12
- 15 / 18 14 / 16 G 1/2 A 26 34 28 26.9 2.5 14
- 22 20 G 3/4 A 32 42 33 31.9 2.5 16
- 28 25 G 1 A 39 47 41 39.9 2.5 18
- 35 30 G 1 1/4 A 49 58 51 49.9 2.5 20
- 42 38 G 1 1/2 A 55 65 56 54.9 2.5 22
- G 2 A 68 76 69 3 24
ISO 11926
- 8 / 10 8 7/16-20 UNF-2A 15 21 12.45 14.4 1.6 11.5 2.4 12
- 8 8 1/ 2-20 UNF-2A 16 23 14.05 16.2 1.6 11.5 2.4 12
- 12 10 / 14 9/16-18 UNF-2A 18 25 15.7 17.6 1.6 12.7 2.5 12
- 12 - 18 12 - 20 3/ 4-16 UNF-2A 23 30 20.65 22.3 2.4 14.3 2.5 15
- 12 - 22 16 - 20 7/ 8-14 UNF-2A 26 34 24 25.5 2.4 16.7 2.5 15
- 22 / 28 20 / 25 1 1/16-12 UN -2A 32 41 29.2 31.9 2.4 19 3.3 15
- 35 1 3/16-12 UN -2A 35 45 32.4 35 2.4 19 3.3 15
- 22 - 35 25 / 30 1 5/16-12 UN -2A 39 48.9 35.55 38.2 3.2 19 3.3 15
- 35 - 42 30 / 38 1 5/ 8-12 UN -2A 48 58 43.55 47.7 3.2 19 3.3 15
- 42 38 1 7/ 8-12 UN -2A 54 65 49.9 54 3.2 19 3.3 15
1)
0.1 G 1/2
0.2 G 3/4
3)
Threaded bore UN-UNF-2B
2)
A is not relevant for
Whitworth pipe threads
(internal/female thread).
Tube OD d1 d3 d4 d4 (wide) d4 d5 d7 d8 a1 b1 L1 Z
LL L S
2) 3)
(d6) +0.4 +0.4 min. +0.05 0.2 max. min. +0.4 1
Seal types and
threaded bores
Male thread:
Whitworth pipe thread,
UN/UNF thread
cylindrical
Standard PEFLEX and O-ring
seals are of NBR,
-35 C to +100 C
FPM/FKM seals for
-25 C to +200 C
Threaded bore
ISO 11926-1 / SAE J 514
Threaded bore
DIN 3852 part form X/ISO 1179-1
Threaded tube
connection stubs
form ISO 11926-2
and 3/SAE J 514
(sealed with O-ring)
Threaded tube
connection stubs
form E/ISO 1179-2
(sealed with PEFLEX
sealing ring)
Threaded tube
connection stubs
DIN 3852-2 form A
(sealed with DIN 7603
sealing ring)
Threaded tube
connection stubs
form B/ISO 1179-4
(sealed by sealing
edge)

466
1)
Leak-tightness can only be achieved
with liquid or elastic sealant.
Series Tube OD d2 b2 d2 b2 d2 b2
min. min. min.
Threaded tube connection stubs
DIN 3852-1 and -2 form C
sealed by tapered thread
Threaded tube connection stubs NPT
ANSI/ASME B 1.20.1 1983
sealed by tapered thread
Threaded bore
DIN 3852-1 and -2 form Z
1)
(for tube connection stubs with tapered threads)
Threaded bore NPT
ANSI/ASME B 1.20.1 1983
for tapered threads
Seal types and
threaded bores
Male thread:
metric ne thread, conical
Whitworth pipe thread,
conical
NPT thread
LL 4 M 8 x 1 keg 5.5 R 1/8 5.5 1/8 NPT 11.6
LL 6 M 10 x 1 keg 5.5 R 1/8 5.5 1/8 NPT 11.6
LL 8 M 10 x 1 keg 5.5 R 1/8 5.5 1/8 NPT 11.6
L 6 M 10 x 1 keg 5.5 R 1/8 5.5 1/8 NPT 11.6
L 8 M 12 x 1.5 keg 8.5 R 1/4 8.5 1/4 NPT 16.4
L 10 M 14 x 1.5 keg 8.5 R 1/4 8.5 1/4 NPT 16.4
L 12 M 16 x 1.5 keg 8.5 R 3/8 8.5 3/8 NPT 17.4
L 15 M 18 x 1.5 keg 8.5 R 1/2 10.5 1/2 NPT 22.6
L 18 M 22 x 1.5 keg 10.5 R 1/2 10.5 1/2 NPT 22.6
L 22 M 26 x 1.5 keg 10.5 R 3/4 13 3/4 NPT 23.1
L 28 M 33 x 2 keg 12 R 1 16 1 NPT 27.8
L 35 M 42 x 2 keg 13 R 1 1/4 17 1 1/4 NPT 28.3
L 42 M 48 x 2 keg 13 R 1 1/2 17 1 1/2 NPT 28.3
S 6 M 12 x 1.5 keg 8.5 R 1/4 8.5 1/4 NPT 16.4
S 8 M 14 x 1.5 keg 8.5 R 1/4 8.5 1/4 NPT 16.4
S 10 M 16 x 1.5 keg 8.5 R 3/8 8.5 3/8 NPT 17.4
S 12 M 18 x 1.5 keg 8.5 R 3/8 8.5 3/8 NPT 17.4
S 14 M 20 x 1.5 keg 10.5 R 1/2 10.5 1/2 NPT 22.6
S 16 M 22 x 1.5 keg 10.5 R 1/2 10.5 1/2 NPT 22.6
S 20 M 27 x 2 keg 12 R 3/4 13 3/4 NPT 23.1
S 25 M 33 x 2 keg 12 R 1 16 1 NPT 27.8
S 30 M 42 x 2 keg 13 R 1 1/4 17 1 1/4 NPT 28.3
S 38 M 48 x 2 keg 13 R 1 1/2 17 1 1/2 NPT 28.3

467
8
tube OD Length up to stop inside
connector [mm]
L 6 7
L 8 7
L 10 7
L 12 7
L 15 7
L 18 7.5
L 22 7.5
L 28 7.5
L 35 10.5
L 42 11
S 6 7
S 8 7
S 10 7.5
S 12 7.5
S 14 8
S 16 8.5
S 20 10.5
S 25 12
S 30 13.5
S 38 16
The following must be taken into consideration when
calculating the length of tubing required for a given
assembly length:
n minimum lengths of straight tube sections and of tube
elbows*
n additional dimensions in the coupling connector
n additional tube sections (aring, bend radii, elbow
lengths, straight sections)
In addition, we recommend that in case of doubt some
extra length be added when designing the ends of the
tubes. This allows the tube length to be adjusted before
commencing pre-assembly for the VOSS coupling system,
if necessary.
Dimension inside coupling connecting piece
Additional lengths when designing tube assemblies
* Depends on the coupling system and pre-assembly
system used.
Length up to
stop inside
connector

468
L1
L2 r
a
r
x
Calculating the equivalent straight tube length
L = total equivalent straight tube length
x = equivalent tube length of elbow
a = bend angle
r = radius
a 2 r
360
L = L1 + L2 + x
Please note that the bend radius is determined by the
bend template of the device.
x =

469
8
Tubing made of organic materials is becoming increasingly
popular in industrial applications. These materials have a
good resistance to oil, grease and fuels as well as to high
and low temperatures. They are also weather-resistant and
have good mechanical characteristics such as fracture and
impact resistance.
Polyamide (PA) tubes possess most of these qualities. They
are manufactured to extremely tight tolerances and can be
easily installed using metal or plastic coupling elements.
All VOSS Fluid cutting ring systems are suitable for use with
tubes made of polyamide (PA).
Polyamide (PA) tubing applications:
n Control, measuring and monitoring technology
n Laboratory equipment
n Food processing industry
n Medical technology and electrical engineering
n Automotive industry
n Plant and equipment construction
n Pneumatics
Polyamide tube material properties
n Low weight
n Corrosion and temperature resistant
n Impact resistance at both low and high temperature
ranges
n Relatively high pressure resistance with low wall thick-
nesses
n Temperature range from -40 C up to +80 C, and
even up to +100 C for short periods.
Product recommendation:
VOSS cutting pliers for plastic tubes
Plastic tubes must not be sawn apart as this leads to burrs,
which endanger the leak-tightness of a coupling. VOSS
Fluid recommends that the VOSS plastic tube cutting pliers
be used to cut plastic tubing to length. This produces burr-
free and orthogonally-cut tube ends. The surfaces of the
cut do not need any additional processing.
Order designation: TD-NTS
Assembly note:
Pre-assembly and nal installation must always be carried
out using tube support sleeve as described in the VOSS
assembly instructions.
VOSS cutting ring systems in applications using polyamide (PA) tubing

470
Pioneer in zinc-nickel applications since 2007 and
still a clear leader.
EC directive 2000/53/EC on end-of-life vehicles was
amended in 2007, partially banning the use of hexavalent
chromium in materials and vehicles components. For us,
this meant that the era of yellow chromate corrosion pro-
tection coatings had come to an end. The technological
characteristics of available alternatives using zinc as a
base coat with thick-lm passivation fell a great deal short
of VOSS quality requirements, and were clearly a step in
the wrong direction. This move was and still is unaccepta-
ble to VOSS, since we always strive to increase the bene-
ts for customers in our products and solutions.
Our solution: VOSS zinc-nickel surface nishes. The
re levant characteristics of these coatings even surpass
those of yellow-chromate nishes. Users were especially
delighted by their corrosion resistance 10 times better
than before. In 2007, this was a huge leap forward in the
hydraulic coupling technology market.
The steel is given three coats to provide optimum corrosion
protection: a zinc-nickel base coat, a passivation layer and
a sealing coat. In 2009, we set up our own electroplating
competence center in which we produce and enhance our
surface nishes.
Features we provide as standard are options elsewhere.
Our surface nishes have set the benchmark for corrosion
resistance in all market sectors and have been used in our
entire product range all around the world since 2007, at
high availability levels. For you, as a customer, this means
maximum process reliability for your applications, homo-
geneous selection of parts, no danger of confusing items.
Suitable for use in hydraulic presses, plant construction,
agricultural and construction machinery, conveyor
engineering as well as for injection-molding machines and
machine tools.
Conceived and thought through
After comparative testing in a salt-spray chamber for 720 hours
VOSS Zink-Nickel Zinc + passivation + sealing coat

471
8
n
n
n
600
100
540 90
Technology
Sustainability
People
Application
Engineering
Surface
Engineering
Process
Engineering
Product
Engineering
The trade mark for corrosion protection.
Our surface nish is much more than just a simple coating.
This is why we have made it a trademark: VOSS coat.
VOSS coat is synonymous with corrosion protection in per-
fection, focussing on technology, sustainability and human
health and safety.
VOSS coat is the result of continuous improvement for
example of friction coefcients, layer thickness relationships
and visual impression. These are the result of many years
of experience in production processes and with customer
applications furthered by our own research and develop-
ment work. Only VOSS unites this comprehensive know-
how under one roof operating a proprietary VOSS coat
competence center including an electroplating test line. In
this way we make sure that our corrosion protection meets
your strictest standards. To achieve a measurable techno-
logical lead for you.
A technological lead, achieved by hard work
VOSS coat is the outcome of many years of in-house
engineering that considers all the factors leading to in
creased benets for the customers. Not only have we
achieved an extremely high level of corrosion protection
but also user-friendly handling in practical applications.
n 1,000 hours corrosion resistance in productive
applications following shipping, handling and
assembly.
Tested using random samples in the assembled state
taken from series production. In view of the micros-
copic lesions which can occur during assembly, this
is the only way of obtaining a reliable estimate of the
service life to be expected in the customers applica-
tions. Under laboratory conditions, the service life of
unassembled parts exceeds 2,000 hours. After this, red
rust starts to develop, whereas white rust only appears
in the form of a light grey lm. In addition, samples for
our own quality assurance tests are taken from all pro-
duction lots.
n Assembly testing of cutting ring coupling (size S30)
VOSS coat ensures optimum assembly torques.
Assembly torque, in Nm
conventional zinc-nickel base coat
zinc base coat
VOSS coat
assembly distance (angular) end of assembly process
VOSS coat nish cross-section
sealing
passivation
Zink-Nickel
steel

472
Perfect assembly torques not too high and not
too low
How to avoid assemblies being too tight or too slack
thanks to our consistent quality in all tube connec-
tions. Our own research, development and production
have enabled us to continually improve the friction
coefcient of VOSS coat to equal the best zinc surface
nishes and have reached a value considerably lower
than that of other zinc-nickel coatings.
Best possible process reliability thanks to a modern
in-house electroplating plant with online sensors
and analysis systems
This plant is designed exclusively for tube couplings
a unique feature. This is where we work to enhance
our electroplating processes in the electroplating
test laboratory for chemical components, and in the
engineering department for production procedures.
In series of tests, the 12 program parameters are
adjusted individually for each one of our 6,600 articles
in order to optimize processes for all geometries and
sizes. We have developed the racks and baskets used
to move the articles through the plant ourselves and
are continually improving these to achieve a degree
of specialization impossible with outsourced process-
ing. We conform without exception to the European
Community Regulation on chemicals and their safe use
(REACH), of course.
Individual plant control programs: a separate program for
controlling 12 parameters is compiled for each of our 6,600
articles.
VOSS electroplating test laboratory: where VOSS coat is being permanently improved

473
8
Process chemistry the
essence of VOSS coat.
Thanks to automated
concentration correction in
baths, process parameters
remain within tight tole-
rances.
Our plant technology is
specically designed to
prevent damage to threads.
The entire plant operation is
controlled from the ground
oor. All process steps and
parameters are displayed
and indicated in real time on
control monitors.
All bath parameters are
continuously monitored.
Chemicals are added in a
fully automatic process to
maintain the correct con-
centration.
Sustainability: only achievable from scratch if
everything is under our control.
Since 2009, we have been operating the VOSS coat com-
petence center, with a oor area of 5,000 m, at our head-
quarters. To provide the best possible working conditions,
the facility has two storeys: on the ground oor, all goods
are transported and the test batches are fed to the racks
and drums for the electroplating plant, then a lift system
conveys them to the second oor. The actual electroplating
process is carried out there and no workers are required on
this oor. We can control all process steps in the plant and
optimize them to suit our requirements, sustainably and
without compromises.
Energy-efcient production:
Alone the sophisticated energy optimization measures
(e. g. heat recovery installations) installed when the
facility was built bring annual energy savings of more
than 490 MWh. This is the annual electric energy con-
sumption of approximately 160 domestic dwellings
Emission reductions (air pollution, water and noise):
Extract air is drawn directly from the space above the
baths and is cleaned by an air scrubber. This brings
pollutant levels in the exhaust air down to values
ex ceeding the lower limits by a factor of more than
250. The same principle applies to our responsible
use of water: instead of using valuable drinking-quality
water, we use process water. Waste water is cleaned
and its pH value neutralized by sophisticated processes
at our own treatment plant. And our electroplating plant
fulls the strictest noise emission regulations for mixed-
utilization urban areas as well.
Reduction of potential environmental hazards:
We use environment-friendly materials.
Raw-material efciency and recycling:
The online analysis process optimizes the useful life
of baths to achieve low resource consumption. Metal
residues are reprocessed and thus returned to the raw-
material cycle.

474
Process optimization has
led to shorter product
immersion times at our
facility than in other electro-
plating plants. This means
even less stress on the
material.
After electroplating, each
production lot is subjected
to quality control inspection
of both the thickness and
the chemical composition of
the coating. The results of
the inspections are
documented.
Our exible plant controls
allow customer-specic
post-processing.
Extract air is drawn directly
from the space above the
baths and scrubbed before
being exhausted. Heat
energy is recovered and
recycled.
The individual: at the focus of all our activities.
Technology improves products. Sustainability ensures
efciency and conservation of resources. But only by
combining these two factors do we really benet the
human beings involved. VOSS coat benets everyone,
now and in the future staff and our customers alike.
Productive working conditions for our staff:
Employees and chemicals are separated by construc-
tion measures. Since concentration-adjustment dosing
of the process baths is fully automated and requires
no manual work, contact to chemicals is avoided.
Ergonomical workplaces, eliminating lifting movements,
for example, prevent fatigue and the errors associated
with this.
Process stability in the interest of our customers
Our good process stability, in conjunction with excellent
component assembly characteristics, virtually eliminates
faults which might occur due to excessively tight or
slack assemblies. Coating processes specically
developed for our products ensure consistently high
corrosion protection at all times for the entire pro-
duct range.
Nickel release:
Our nickel release rate is more than 50 times
lower than the limit values dened in EC regulation
1907/2006 for the release of nickel by objects coming
into direct and prolonged contact with human skin.

475
8
Reliability:
n 1,000 hours corrosion resistance under practical
conditions.
n A technological leader among surfaces, thanks to many
years of experience, research and development.
n Sustainable production in our own VOSS coat
competence centre.
n 455 million couplings have been delivered since 2007.
n More than 30% of all users in Germany choose
VOSScoat.
n High availability and delivery readiness: lean, rapid
supply chains.
n Image enhancement and a high resale value for your
machinery and plant, thanks to uncompromisingly high-
quality components.
n Enhanced customer satisfaction due to minimum risk of
complaint.
n Application engineering: customer specications can
be realized by our own employees (e.g. in the case of
prototypes).
n Assuring the future through our own research and
cooperation with universities and other higher
education institutions.
VOSS coat: in a class of its own.
Corrosion protection is only as good as the weakest com-
ponent. So it is best not to have any weakest component.
VOSS coat sets the standard when it comes to improving
corrosion protection in your entire system. Safety which
improves your products and impresses your customers.

476
The VOSS coat surface nish is compatible with all normal
hydraulic uids. However, as VOSS Fluid products are used
in a wide range of applications, they will also come into
contact with other media such as newly-developed
synthetic hydraulic uids, fuels, cleansing agents, lubricants,
gases or corrosive alkaline or acid liquids. If you are
planning to use media which cannot be described as a
hydraulic oil commonly used in mechanical engineering
VOSS couplings resistance to aggressive media
applications, we recommend that you examine their
suitability prior to use. Please note that not only their
stability when used with VOSS Fluid surface coatings has
to be taken into consideration, but also their compatibility
with elastomers and other hydraulic components as well.
An overview is given in the following table, which is only
meant to serve as a guide:
Medium Coupling material Seal material
Steel Stainless steel
1.4571
NBR FPM/FKM EPDM
Acetone
Ethanol (ethyl alcohol)
Ether
ASTM oil No. 1
ASTM oil No. 2
ASTM oil No. 3
ASTM oil No. 4
Brake uid
Gasolene (petrol)
Benzene
Steam
Diesel fuel
Compressed air (dry)
Natural gas
Petroleum oil
Liquid propane (LPG)
Transmission oil
Glycol (ethylene glycol)
Fuel oil
Hydraulic uids (petroleum-based) HL/HLP
Hydraulic uids (polyglycol-based) HEPG
*
Hydraulic oils (bio-oil based) HEES
*
Hydraulic uids (synthet. ester) HEES
*
Hydraulic uids HFC
Carbon dioxide
Carbon monoxide
Methane
Methanol (methyl alcohol)
Mineral oils
Unprocessed natural gas
**
Kerosene
Crude petroleum oil
Soap solution
Shell Naturelle, HF-E-46
Silicone oils
Skydrol 500
Skydrol 7000
Turpentine
Water
Sea water
resistant
* resistance depends on temperature
Please note that any materials resistance to aggressive media depends on the temperature of the media when used.
** our gas requires reduction of material hardness when stainless steel is used
resistant under certain conditions not resistant

477
8
To ensure maximum leakage protection, different seal
materials have to be used, depending on the respective
application. The suitability of the elastomer to be selected
depends essentially on the media being conveyed and on
the temperature range.
Please note that the effectiveness of elastomer seals will be
affected by external inuences, contact with media, friction
and ageing.
Therefore the elastomers should be checked for the follow-
ing kinds of damage when carrying out service or main-
tenance work, and should be replaced when necessary:
n cracking
n rough or otherwise changed surface
n deformation
n hardening or softening
n swelling
n reduced elasticity
The notes given in DIN 7716 (rubber products; require-
ments for storage, cleaning and maintenance) must be
observed when using elastomer seals.
n Keep in dry storage at temperatures not exceeding
+ 25 C
n Protect against direct sunlight, ozone and strong
articial lighting
Seal material Nitrile butadiene rubber Hydrated NBR Fluoroelastomer Ethylene propylene
diene-monomer rubber
Short designation
(Examples:
trademarks)
NBR
(e. g. Perbunan
)
HNBR FPM/FKM
(e. g. Viton
)
EPDM
Temperature range -35 C up to +100 C -30 C up to +140 C -20 C up to +200 C -40 C up to +150 C
Low temperatures ++ + + ++
Media resistance good good very good depends on conditions
Ozone resistance limited good very good good
Materials of the soft seals (elastomers)
The default elastomer material used by VOSS for 24 tube
couplings, ange couplings and valves is NBR. All DKO
screw couplings, VOSSForm
SQR
and ES-4 products are
supplied with elastomer seals of FPM/FKM (e. g. Viton
).
VOSS Fluid also offers other seal materials for the entire
connector product range as options.
Viton

Perbunan

478
Ozone resistance of elastomer seals
Ozone is a gas occurring naturally in the atmosphere and
which protects the environment against solar ultraviolet
radiation. However, ozone is also a very strong oxidizing
agent that attacks virtually all organic compounds.
Elastomer seal materials, e. g. NBR, are particularly
sensitive in this respect. Even a low atmospheric ozone
concentration can impair product quality and service life
considerably.
Ozone cracks the polymer chains of the seal material,
thereby increasing the danger of this tearing, even at low
strain values (less than 10 %). This risk may even be
increased under certain temperatures and humidity
conditions.
In our production and storage processes, VOSS Fluid
always ensures optimum conditions for the seal
materials used. For example, all seals are protected
against heat exposure, direct sunlight and soiling. Long
storage times are also avoided.
To prevent damage, you should observe the following
notes on storing seal materials:
n Elastomers must be stored at a temperature between
+5 C and +25 C.
n Deformation of the seals during storage should be
avoided.
n Seal materials should be protected against direct
contact with heat sources or lighting xtures. Direct
sunlight or strong articial lighting with an ultraviolet
component must also be avoided.
n Extremely damp and extremely dry conditions must be
avoided. There must be no condensation, which means
that the relative humidity of the storage spaces must be
lower than 70%.
n Packaging, particularly plastic bags, must be protected
against UV radiation.
n Please note that ozone can also be emitted by other
sources, which means that the storerooms may not
contain any mercury-vapour lamps, high-voltage
equipment and electric motors or other equipment
which might cause arcing or electrostatic discharges.
Exposure to combustion exhaust fumes and organic
gases must also be avoided.
n While in storage, elastomer seals must not be allowed
to come into contact with solvents, oil and grease.
n The service life of seals depends to a large extent on
the type of elastomer used. Under ideal conditions,
seals made of NBR and HNBR can be stored for up to
6 years and FPM/FKM seals for up to 10 years.
n Seals pre-assembled on the couplings must be
inspected for damage and contamination before they
are nally installed.

479
8
SQR
BV-10
System comparison requirements / system features
* Machine-assisted pre-assembly is recommended
** Recommendation: DurNi coated connection parts
Technical comparison
General
for tube couplings
as specified in standard
DIN EN ISO 8434-1
Series L/S
Tube OD 6 42
Type of seal metallic metallic + soft sealing
Pressure load capacity
up to 315 bar (series L) up to 500 bar (series L)
up to 630 bar (series S) up to 800 bar (series S)
Features
2-cutting-edge cutting
ring
ring with additional stop
ring with stop and
additional soft seals
Tube forming solution
with soft seals
10 flared coupling
Materials
Material version Steel / stainless steel* Steel Steel / stainless steel* Steel / stainless steel* Steel
possible material pairing Steel / stainless steel Steel / stainless steel**
Soft seal material FPM/FKM (black) FPM/FKM (green)
NBR (standard)
FPM/FKM (green)
Machine-assisted
pre-assembly
possible required
Pre-assembly device
Type 90 Basic II / Comfort Type 100 /
Type 100 Compact
Type 90 Basic II / Comfort
Type 80 N3 Type 80 N3
Manual pre-assembly possible
Specifications
Installation spaces
Minimum length of straight tube sections H > 33 mm (L12)
(see catalogue page 382; 392; 397)
Minimum length of
straight tube sections
(A1-L1) > 53 mm (L12)
(see catalogue page 407)
Minimum length of straight
tube sections
(L1+L2) > 69.5 mm (L12)
(see catalogue page 419)
Machine-assisted pre-assembly only possible to a limited extent if the bend radii
are small
Small bend radii are only
possible to a limited
extent because of pre-
assembly device
Small bend radii are only
possible to a limited
extent because of pre-
assembly device
Leak-tightness in relation
to influencing factors /
assembly
Many influencing factors, reliability depends on correct assembly
Hardly any influencing
factors, very high safety
factor (process reliability)
Some influencing factors,
high safety factor

480
SQR
BV-10
Specifications
Typical application sectors Construction machinery,
wind turbines, agricultural
machinery
Pneumatic brakes, railway
engineering
Agricultural machinery,
cranes, mobile hydraulic
systems
Elevators, presses
Injection-molding
machines, mining vehicles
Can be used in safety
areas.
No Yes
Fitter training
requirements
Refresher training at 2-year intervals is recommended
low, single training course
required
low, initial training course
required, occasional
refresher courses
recommended
Pressure load capability
good very good very good excellent excellent
- static/dyn. pressure load
capability
- Transmission of external
forces
Resistance to tearing out
of tubing
good good good very good very good
Long-term durability good good very good excellent excellent
Influence of tube
preparation
very great very great very great little great
Conclusion
Cutting ring for normal
applications
Cutting ring for normal
applications, also
suitable for high
pressures
Cutting ring for all
applications, high
pressures and
additional safety against
leakage
Tube-forming solution
for highest requirements
and process stability
Flaring solutions for
highest requirements,
also ideally suited for
repairs

481
8
All VOSS Fluid products have been carefully designed,
taking into account ease of assembly, user-friendliness and
the products ability to reliably full the intended purpose.
In order to ensure these qualities while the products are in
use, the careful choice of hydraulic coupling systems along
with their correct assembly and installation are of tremen-
dous importance.
Almost 85 % of all failures are due to assembly or
in stallation faults, leading to impaired sealing functions or
even complete failure of the coupling or connection.
Distribution of causes of assembly faults:
n approx. 55 % too slack assembly for tube OD
2042 mm.
n approx. 40 % over-tightening for tube OD 6 18 mm.
n approx. 5 % other assembly/installation faults
Faulty hydraulic lines not only lead to immense re-working
costs and image loss, they can also have serious conse-
quences such as accidents, re hazards and environmental
damage.
On the following pages, you will nd system-related notes
which will help you identify potential faults causes and take
preventive action.
You must on all accounts observe the notes in this
catalogue as well as the assembly and operating
in structions for VOSS tube connection systems, tools
and pre-assembly devices.
In addition, we recommend regular user training and
assembly auditing by our qualied staff.
Preventing faults and correcting malfunctions

482
VOSS 2S/ 2SVA cutting ring couplings
Characteristic Preventive measures
Inadequate penetration of cutting ring /
not enough tube material raised in front of first cutting edge.
Observe the specified tightening paths (number of turns) when
manually pre-assembling the coupling.
n Mark strokes on parts to allow visual control of the rotation angle
n Use lubricants to reduce the assembly forces required
Use pre-assembly devices and VOSS tools
Observe the specified pre-assembly device parameter settings
n Inspect and check the pre-assembly devices regularly
Select tubes as specified in DIN EN 10305-4
Do not use rotary grinder or tube cutter
Only de-burr tube edges internally and externally, do not sharpen
them. Check de-burring tool regularly.
Cut tubes at right angles.
Ensure that the area where the tube was cut is free of contaminati-
on, metal chips and paint.
No visibly raised tube material in front of the first cutting edge /
cutting ring is jammed on the tube.
The tube must be pushed firmly against the stop in the stud.
n Ensure that the assembly is not subject to stress during installation
Tube has been pressed away from under the cutting ring /
the tube bulges
For thin-walled tubes, use suitable reinforcing supports.
Avoid frequent re-tightening of the coupling after assembly.
Too much tube material has been raised Observe the specified tightening paths when manually assembling
the coupling.
n Mark strokes on parts to allow visual control of the rotation angle.
n Use lubricants to reduce the required assembly forces.
Select tubes as specified in DIN EN 10305-4
Avoid using extenders for small tubes and couplings.
Damaged threads /
after being slackened, the nut cannot be unscrewed any further
by hand.
Observe the specified tightening paths when manually assembling
the coupling.
Problem: leaks

483
8
The nut bulges / damage to the hex spanner surface Observe the specified tightening paths when manually assembling
the coupling.
Cutting ring is obviously too near to the tube end /
stud connector has expanded
Inspect and check the pre-assembly devices regularly.
n Use taper gauges.
Do not re-use screw coupling parts more than once.
Use pre-assembly dies, high-strength material version.
Use VOSS test gauges to check cutting-ring positions.
Damage found on cutting ring after pre-assembly Inspect and check the pre-assembly devices regularly.
n Inspect internal cone surfaces for damage and/or contamination.
Using suitable lubricants increases tool service life.
Cutting ring leaks repeatedly Select the most suitable system for the respective application
(depending on temperatures, pressure and type of load and stress)
Use a soft sealing system (ES-4 / VOSSForm
SQR
/ BV-10).
Avoid duplicate dimension notations; take expansion loops into
consideration to allow stress-free installation.
Use tube saddles or clamps.
Provide specied minimum length of straight tube leading to elbow.
Cutting ring has penetrated unevenly Provide specified minimum length of straight tube leading to elbow.
Select tubes as specified in DIN EN 10305-4.
Slight oil film around the coupling Only apply a small amount of lubricant to the components during
assembly.
Degrease the components after assembly.
Components bind at surfaces in contact with one another. Use suitable stainless-steel assembly paste.
Apply sufficient amount of lubricant to the contact surfaces.
Only use hardened pre-assembly dies for manual pre-assembly work.
Use pre-assembly devices and VOSS tools.

484
VOSS 2S/ 2SVA cutting ring couplings
Tube breaks off directly behind union nut Use tube saddles or clamps.
Ensure that components are not subject to stresses in installed
condition, avoid shear loads.
Select the most suitable system for the respective application
(depending on temperature, pressure and type of load)
Cutting ring peels material off end of tube due to too shallow
incision.
Before each final assembly, check the amount of tube material
raised by the first cutting edge.
Re-assemble and tighten up cutting-ring couplings which were
inadequately tightened.
Before each final assembly, check the amount of tube material
Cutting ring has been placed on tube the wrong way around Check that the cutting ring faces the correct direction.
Problem: tube rupture
Problem tube pulled out of coupling

485
8
VOSS 2S plus cutting ring couplings
Problem: leaks
n Use lubricants to reduce the assembly forces required.
Ensure that the area where the tube was cut is free of
contamination, metal chips and paint.
the tube bulges
Constriction behind the cutting ring /
damaged thread /
by hand /
the nut bulges /
damage to the hex spanner surfaces
Observe the specified tightening paths when manually assembling
the coupling.
Cutting ring is obviously too near the tube end /
n Use taper gauges.
Do not re-use screw coupling parts more than once.

486
VOSS 2S plus cutting ring couplings
Problem: leaks
Cutting ring leaks repeatedly Select the suitable system for the respective application
(depending on temperature, pressure and type of load).
Use a soft sealing system (ES-4 / VOSSForm
SQR
/ BV-10)
consideration to permit stress-free installation.
Provide specied minimum length of straight tube leading to elbow.
Cutting ring has penetrated unevenly Provide specified minimum length of straight tube leading to elbow.
assembly.
Apply sufficient lubricant to the contact surfaces.

487
8
Select the most suitable system for the respective application (
depending on temperature, pressure and type of load)
Tube breaks off directly behind the cutting ring Stop tightening as soon as the cutting ring has reached the block.
incision.
Before every final assembly, check the amount of tube material
Cutting ring has been placed on tube the wrong way around Check that the cutting ring faces the correct direction.

488
VOSS ES-4/ ES-4VA cutting ring couplings
Ensure that the area where the tube was cut is free of
contamination, metal chips and paint.
the tube bulges
Cutting ring is obviously too near to the tube end /
n Use taper gauges.
Do not re-use screw coupling parts repeatedly.
Sweating of liquid at tube end In order to prevent the soft seal from being damaged, it is essential
to apply a lubricant to the tube before installing the cutting ring
during the pre-assembly process.
Deburr the inner and outer edges of the tube end lightly.
Check de-burring tool regularly.
Problem: leaks

489
8
Sweating of liquid at stud connector end To prevent damage to the soft seals, lubricant must be applied to all
soft seals of the cutting- ring before assembling the coupling.
Check soft seals for damage before assembling the coupling,
replace seals if necessary.
Missing soft seals Check that all components are in place before assembling the
coupling.
Replace soft seal.
Cutting ring leaks repeatedly Select the most suitable system for the application (depending on
temperatures, pressure and type of load and stress)
account to permit stress-free installation.
Observe minimum lengths specied for straight tubes following elbows.
Cutting ring has penetrated unevenly Provide specied minimum length of straight tube leading to elbow.
Select tubes as specied in DIN EN 10305-4.
Very little or no material raised by the rst cutting edge Stainless-steel cutting rings must be used for stainless-steel tubes.
Apply sufcient amount of lubricant to the contact surfaces.

490
VOSS ES-4/ ES-4VA cutting ring couplings
Select the most suitable system for the application
(depending on temperature, pressure and type of load)
Tube breaks off directly behind the cutting ring Stop tightening as soon as the cutting ring has reached the block.
incision.
Cutting ring has been placed on tube the wrong way around Check that the cutting ring faces in the correct direction.

491
8
VOSSForm
SQR
/ VOSSForm
SQR
VA tube couplings
Nut comes loose during operation Observe the specified tightening paths (number of turns) when finally
assembling the coupling.
n Use lubricants to reduce the required assembly forces and to
reduce soft-seal wear.
Observe specified tightening torque where this is the assembly criterion.
No clamping ring in the nut Check that all components are in place before assembling the coupling.
Install the soft seal.
Fehlender Klemmring in der Mutter Check that all components are in place before assembling the coupling.
Store DIN union nuts and SQR function nuts separately in order to
prevent mistakes.
Only use SQR function nuts.
VOSSForm
SQR
contour is not created correctly Check and inspect tools and machines regularly.
Check the contour after every forming operation.
Apply a thin film of lubricant only to the inner and outer tube
surfaces, not to the end face, as oil on the end face can falsify the
forming process results.
Tube must be pushed against the stop plate during the forming
process.
Clean tools regularly.
Slight oil lm around the coupling Only apply a small amount of lubricant to the components during assembly.
Material surface binds during tube forming /
tool breakage
Only stainless-steel tools (marked VA for stainless-steel use) may be
used for forming stainless-steel tubes.
Use special ne-cutting oil (Feinschneidel FOE).
Apply sufcient lubricant to the contact surfaces.
Couplings leak repeatedly Select the most suitable system for the application
(depending on temperature, pressure and type of load and stress)
Problem: leaks
Tube breaks off directly behind union nut Tube breaks off directly behind union nut

492
VOSS BV-10 ared couplings
Flared cone has not been driven into the tube far enough /
saw-toothed surface is not completely covered.
Check that the gap between the face end of the tube and the collar
of the cone is correct ( 0.5 to max. 1 mm).
Nut comes loose during operation Observe the specified tightening paths when manually assembling
the coupling.
n Use lubricants to reduce the assembly forces required and to
reduce soft-seal wear.
Tube has bulged in the front section Check that the gap between the face end of the tube and the collar
of the cone is correct ( 0.5 to max. 1 mm).
The end face of the tube must not come into contact with the collar
of the flared cone during the pre-assembly process.
Damaged thread /
by hand /
the nut bulges /
Observe all specified tightening distances
Missing O-ring Check that all components are in place before assembling the
coupling.
Clamping ring missing Check that all components are in place before assembling the
coupling.
Always install clamping ring before flaring the tube.
assembly.
Contact corrosion during operation When using stainless-steel tubing, only use Dur-Ni-coated flared
cones.
Apply sufficient lubricant to the contact surfaces.
Problem: leaks

493
8

494
VOSS ZAKO/ ZAKO LP
Flared cone has not been driven into the tube far enough /
saw-toothed surface is not completely covered
Observe specified gap width between face end of tube and collar of
ZAKO ring, see assembly instructions for dimensions.
ZAKO ring lifts off the connecting surface Tighten all screws/bolts with the specified torques.
Tube has bulged in the front section Observe specified gap width between face end of tube and collar of
ZAKO ring, see assembly instructions for dimensions.
The end face of the tube must not come into contact with the collar
of the ZAKO ring during the pre-assembly process.
Screws/bolts are difficult to screw into the threaded flange Lubricate the screw/bolt threads
coupling.
Sealing surfaces are dirty Keep sealing surfaces and soft seals clean.
Flange mounted crookedly on the tube Ensure that the flange is at right angles to the connecting surface.
n Tighten up diagonally opposing screw/bolt pairs crosswise.
Slight oil film around the coupling Degrease the components after assembly.
Problem: leaks
Tube breaks off directly behind the flange Tube breaks off directly behind union nut

495
8
Nut comes loose during operation Observe the specified tightening paths (number of turns) when finally
Observe specified tightening torque where this is the assembly
criterion.
Damaged thread /
by hand /
the nut bulges /
damage to the hex spanner surfaces /
wire pin has come out of the groove
Observe the specified tightening paths (number of turns) when finally
coupling.
assembly.
Damaged O-ring Align DKO coupling properly before tightening it by hand. Hold the
connecting piece body with a spanner to counter tightening torque
when nally tightening up the connection.
Use lubricants to reduce the assembly forces required and to reduce
soft-seal wear.
depending on temperature, pressure and type of load and stress)
Problem: leaks
VOSS taper seal couplings (DKO)
DKO coupling cracks open radially along the groove for the wire
pin
Install the connected tubes and hoses in such a way that no
additional shear loads will act on the coupling.
Ensure that the components are not subjected to stresses in the
installed state.

496
VOSS 24 couplings
Screwed connection pulls out of the threads Observe all specified tightening torques
n Use lubricants
Damaged thread /
Observe all specified tightening torques
n Use lubricants
Thread tears away Observe all specified tightening torques
Use a spanner to hold the coupling body when assembling the
coupling.
Missing seal (PEFLEX or O-ring) Check that all components are in place before assembling the
coupling.
Threaded section cannot be screwed into the female part Check whether the threads are imperial or metric
(danger of confusion).
n Use the VOSS thread gauge board to determine the thread type
and size.
Leaks in the threads Keep sealing surfaces and soft seals clean.
Use the correct type of seal for every threaded hole.
Avoid screwing conical male stud connectors into cylindrical
threaded holes.
n Use components with adjustable screw connections as an
alternative.
Leakage at recesses When re-assembling used components, especially male stud
connectors with a sealing edge (form B), renew the recess every time.
Use the correct type of seal for every threaded hole.
Damaged thread /
hairline cracks in the male stud connector
Correct handling and transportation.
Inspect and check coupling components before assembly.
Check that the DKO cone has a stop to prevent over-tightening of
the connection.
Slight oil lm around the coupling Only apply a small amount of lubricant to the components during
assembly.
Problem: leaks

497
8
Male stud connectors cannot be unscrewed manually after being
initially slackened
Observe the tightening torques specied for the respective mating
materials.
Use suitable lubricants.
Metal chips in the threaded hole Clean the threads.

498
Lower process costs
Reduce throughput times
Increase process reliability by applying individual logistics solutions
Services

499
9
Value Added Solutions
P.501
Values added by VOSS Fluid
P.502
VOSS-quality assembly training
and audits
P.503
Lower costs by C-parts
management
P.504
Certification and approvals
P.505
Content Type/Page

500
Value Added Solutions
The high value which VOSS Fluid products and services
add to the customers own products and systems offer
sustained technical and economic advantages. This added
value is dened in terms of core skills in the three elds:
development and production, long-term corrosion pro-
tection, availability and services.
Permanent critical observation of our own processes,
ongoing investments and the employment of qualied
skilled staff are constantly opening up new improvement
potential for our customers.
Corrosion protection specialists
Intelligent logistics systems
Solutions for highest efciency

501
9
The high quality and user-friendliness of VOSS Fluid
product solutions ensure sustained leak-tightness at all
times with no negative effect on overall system costs.
Corrosion protection by VOSS coat as a standard
feature, and VOSSs own electroplating plant ensure
sustained process reliability and stability.
Maximum possible regional availability and wide range
of services optimize the supply chain at the customers
end.
n High process safety in assembly / installation processes
n Short assembly/installation times / high productivity
n No reworking required
n Permanently leak-tight connections
n Use of optimum components and systems
n Improved product quality
n Reduction of production costs
n Best available corrosion protection in hydraulic
connection engineering
n System selection assistance
n Optimum matching of VOSS components, allowing
ease of assembly and installation
n In-house electroplating processes optimized to avoid
thread damage
n Constant further development of surface treatments to
reduce corrosion and increase ease of assembly
n Optimization of your corrosion protection measures
n Improved customer satisfaction
n Delivery service performance level > 99%
n Reduction of your stock volumes and re-stocking times
n No special materials management needed
n Complete support for introduction of KANBAN
n Analysis and documentation of consumption
n Web-KANBAN for online monitoring of your entire
uid coupling logistics
n Simplication / automation of your supply chain
n Reduction of your material management costs
Values added by VOSS Fluid
Solutions for highest efciency
improve the economic advantages wherever tube couplings are used in your company.
Corrosion protection specialists
protect your machinery and plants against corrosion for their entire service life!
Intelligent logistics systems
provide intelligent logistics, specially tailored to your needs!

502
Maintain safety through adequate training
VOSS-quality assembly training and
audits
Leakages are the worst enemy of hydraulic systems.
There are many potential causes of faults, but human
error is usually the key factor. Only highly-qualied staff
can detect error potential at an early stage and thus avoid
errors. VOSS offers regular training courses, both at our
Wipperfurth facilities and at the customers own premises,
anywhere in the world. In our assembly audits, we watch
your staff at work, analyze processes, inspect assembly
workplaces and equipment and then work out tailor-made
training measures to enhance your companys sustainable
productivity. Less faults, faster results, lower costs.
n Assembly training courses to qualify staff, including both
theory and practical training
n Assembly audits for process safety and reliability:
inspection of all assembly processes, including checking
pre-assembly devices and tools on site

503
9
Lower costs by C-parts management
Savings potential
Only a fraction of the costs of hydraulic coupling
components are caused by the actual product.
Logistics make up a disproportionately high share of the
costs, since these components belong to the C-parts
range. However, if any of these components is missing, the
assembly process is disrupted just as much as if an A-part
is missing.

C-parts management
VOSS Fluid is aware of its customers specic needs and
has logistics systems and solutions in place which save
process costs, reduce throughput times and ensure high
process reliability. The key to this solution is called
individuality.
In cooperation with the customer, VOSS develops and
implements logistics solutions based on the individual
application case. The following examples show how
VOSS Fluid has rationalized logistics processes by the use
of C-part management.
n Card Kanban
n 2-bin Kanban
n Web KANBAN
n Kit service
n Immediate service
n EDI
Further information upon request.
Total costs Hydraulic connection
Product Price 1525%
Logistics Identication of needs
Purchasing administration
Incoming goods receipt
Packaging and disposal
Quality management and
testing costs
Warehousing and logistics
Inventory costs
Transportation
Assembly line supply
Down-time costs 7585%
Total 100%

504
The following VOSS Fluid tube couplings have been
approved by the DVGW for gas applications (gas trans-
port, plant construction, natural gas lling stations,
gas-fuelled vehicles, liquid gas systems):
n VOSS 2S cutting ring couplings
n VOSS 2S plus cutting ring couplings
n VOSS ES-4 cutting ring couplings
n VOSS BV-10 ared couplings
n VOSSForm
SQR
tube couplings
* DVGW German Association of Gas and Water
Engineers
VOSS Fluid has been certied by TV Rheinland in
accordance with DIN EN ISO 9001 and DIN EN ISO 14001.
The most common VOSS tube couplings are approved by
all major certication companies.
Gases approved in accordance with DVGW-Arbeitsblatt
(DVGW Code of practice) G 260:
n compressed air
n natural gas
n liquid petroleum gas
(Generally, all combustible gases supplied by public gas
supply utilities in Germany are approved).
Operating pressure:
A maximum operating pressure (MOP) of up to 250 bar is
permitted for the heavy-duty coupling series.
A MOP of 250 bar is permitted for couplings of the light-
weight series with tubes of outer diameters up to 18 mm.
For tube outer diameters of 22 mm and more, the MOP is
limited to 160 bar.
Operating temperature:
Between - 20 C and +60 C
n Germanischer Lloyd
n Det Norske Veritas
n Lloyds Register of Shipping
n Bureau Veritas
n American Bureau of Shipping
n US Coast Guard
n ABS
n Russian Maritime Register of Shipping
n DVGW
n Deutsche Bundeswehr (German armed forces)
n Technical committee Maschinenbau, Hebezeuge,
Htten- und Walzwerksanlagen (MHHW) of the
HVBG-BGZ [umbrella organization of German trade
associations]
n TSSA
We are happy to inform you of further certications upon
request.
Approvals for gas applications in accordance with DVGW*
Certication and approvals
Attention!
Approvals have been obtained for specic products and
models, applications and operating conditions. Since
approvals are only granted for a specic limited period,
VOSS renews these as soon as they are due to expire.
Detailed information is given in the respective approval
certicate.
Please request the up-to-date versions of approval
certicates from us. We are happy to advise you on all
matters concerning certication and approvals.

505
9

Voss Catalog

Uploaded by

Copyright:

Available Formats

Voss Catalog

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Voss Catalog

Uploaded by

Copyright:

Available Formats

VOSS Fluid GmbH

is a registered trademark of E. I. du Pont de Nemours and Company.

is a registered trademark of LANXESS Deutschland GmbH.

is a registered trademark of E. I. du Pont de Nemours and Company.

is a registered trademark of LANXESS Deutschland GmbH.

is a registered trademark of E. I. du Pont de Nemours and Company.

is a registered trademark of LANXESS Deutschland GmbH.

You might also like