Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Rock Formation in Singapore

Download as pdf or txt
Download as pdf or txt
You are on page 1of 85

TriTech

Geology of Singapore
Tritech Consultants Pte Ltd
July 2012
Dr Cai Jun Gang
Geotechnical Engineering Appreciation Course
(Jointly organised by IES Academy and GeoSS)
TriTech
1. Some Concepts in Geology & Significance of Geology in Civil
Engineering
2. Recent Geological & Deep Rock Investigations
3. Singapore & Adjacent Geology
4. Geological Setting of Singapore
5. Features of Singapores Geological Formations
6. Description of Singapores Rocks & Soils for Civil Engineering
Practice in Singapore
7. Weathering Classification of Singapores Rocks for Civil
Engineering Practice in Singapore
8. Updated Geological Maps & Report - 2
nd
Edition, DSTA (2009)
Topi c s
TriTech
Some Conc ept s i n Geol ogy
TriTech
Some Conc ept s i n Geol ogy
Earth is an active planet in a constant state of change.
Earth movements are vital to the cycles. Without them
the land would be eroded down to just below sea level.
Plate tectonics provide the mechanisms for all earth
movements. The hot interior of the earth is the ultimate
energy engine driving all geologic processes.
Geologic processes modify the earths surface, destroy old rocks, create
new rocks, and add complexity to ground conditions.
Geologic times are in millions of years. The earth is 4,500 million years
old.
Most rocks encountered by civil engineers are 10 - 500 million years old.
They have often been deformed, faulted, weathered, and eroded over many
millions of years.
Most surface landforms visible today have been carved out by erosion
within the last few million years.
Sediments from rock destruction, weathering, and decomposition
Rivers major highways transporting new sediments
Seabed where much new sediments are deposited
Earths crust where rocks are created and deformed.
TriTech
Cyc l i c Geol ogi c al Pr oc esses
Weathering
Rocks outcrop
to surface
Earth
Movement
Igneous
Rocks
Magma
Melting
Metamorphic
Rocks
Sedimentary
Rocks
Metamorphism
Lithification
Transport
Deposition
Erosion
Sea
s
o
i
l
s

&

s
e
d
i
m
e
n
t
s
TriTech
Si gni f i c anc e of Geol ogy i n Ci vi l Engi neer i ng
Civil engineering works all carried out ON (building foundation) or IN
(excavation & tunneling) the ground.
Interaction between Ground and Civil Works Geological formations,
geological structures, strength of rocks and soils, and
deformation/displacement of rocks and soils may result in Stable or Unstable
Ground.
Site Investigation where civil engineers encounter geology and get to
interpret ground conditions - often from minimal evidence.
Unforeseen geologic conditions can still occur as ground geology can be
almost infinitely variable. They are often unforeseen due to Inadequate Site
Investigation.
Civil engineering design shall accommodate geologic conditions which are
correctly assessed and understood as the best geological knowledge obtained
in site investigation.
Geology presents uncertainties and complexities which
continually pose challenges to civil engineers.
Geologic risk is the first risk faced by civil engineers
TriTech
Rec ent Geol ogi c al & Deep Roc k
I nvest i gat i ons
TriTech
1. Geologic Investigations for Rock Cavern Construction in the Bukit Timah Granite (Econ),
Sponsored by NSTB, Studied By NTU, 1990-1994
2. Site Characterization of Bukit Timah Granite for Rock Cavern Construction (Econ) , Funded by
LEO (DSTA) of MINDEF, Studied by NTU and Singapore Technologies Construction (Pte) Ltd,
1995-1997
3. An Investigation of Hot Spring at Sembawang, Funded by Faser and Neave(Singapore), Studied
By Zhao J ian and Chen CN, 1994
4. Geologic Investigations for Rock Cavern Construction in the J urongFormation (S&F),
Sponsored by NSTB, Studied By NTU & PWD, 1995-1999
5. Geologic Investigations for Underground Science City at Kent Ridge (S&F), Sponsored by NSTB,
Studied By NTU & PWD & J TC, 1997-2000
6. Geologic Investigations for Underground Oil/ Gas Storage Rock Caverns at J urongIsland
(Tritech), Sponsored by NSTB, Studied By NTU, 2000-2002
7. Geologic Investigations for Proposed Development of Hydrocarbon Caverns Storage in J urong
Island (Tritech) - Phase II-Feasibility Study, Funded ed by J TC, Studied by NTU & Geostock,
2003-2006
8. Complementary Geologic Investigations at Banyan Basin for Development of Hydrocarbon
Caverns in J urongIsland (Tritech), Flex I and Flex II Study, J urongIsland, Geostock/ J CPL,
2006 -2007
9. Geologic Investigations at West of J urongisland (Tritech), Funded by J TC, Studied by Tritech,
2008.
10. Geologic investigation at Kent Ridge for USC Detailed Feasibility Study (S&F), funded by J TC.
11. Geologic investigation at J urongHill for Feasibility Study for Underground Warehouse
Development.
12. Other recent geologic findings in building & infrastructure construction projects, i.e. tunneling
& excavation of new MRT Lines.
13. A deep geological exploration to cover west and north-east areas is going on by the Geologic
Office of BCA.
Rec ent Deep Roc k I nvest i gat i ons (20 Year s)
TriTech
Layout of Rec ent Roc k I nvest i gat i ons w i t h Sei smi c
Ex pl or at i on and Deep Bor ehol es
TriTech
TriTech
Si ngapor e & Adj ac ent Geol ogy
TriTech
Si ngapor e & Adj ac ent Geol ogy
Background
Our geology is closely related to that of Peninsular
Malaysia.
Johor has rocks identical to our gabbroic and noritic
rocks of the Gombak Norite; our granitic rocks of the
Bukit Timah Granite; our sedimentary rocks of the
Palaeozoic Volcanics, Sajahat Formation, and Jurong
Formation; and our thick deposit of sand and gravel of
the Old Alluvium.
TriTech
Sketch by Michael Lee
TriTech
Geol ogi c al Set t i ng of Si ngapor e
TriTech
1
2
4
5
Geol ogi c Set t i ng of Si ngapor e
Singapores natural deposits are classified under 10 geological formations. In decreasing age, they are outlined with their
characteristic rock or sediment types.
1. Sajahat Formation: quartzite, argillite
2. Gombak norite: norite and gabbro
3. Palaeozoic Volcanics: tuff
4. Bukit Timah Granite: granite
5. Jurong Formation: reddish mudstone, grey fossil-rich mudstone and shale, fossil-rich limestone, siltstone, sandstone,
conglomerate
6. Fort Canning Boulder Bed: hard red and white sandy silty clay containing many sandstone boulders
7. Old Alluvium: dense muddy sand/gravel
8. Huat Choe Formation: firm white kaolin clay
9. Tekong Formation: loose pebbly sand
10. Kallang Formation: soft grey clay, loose brownish muddy sand, loose light grey to white sand, peaty clay.
6
3
9
7
8
10
TriTech
Geol ogi c Set t i ng of Maj or For mat i ons
Formation Age Material Distribution
Bedrock formations
Sajahat Formation Early Palaeozoic
(540 445 my)
quartzite, argillite P. Tekong, P. Sajahat,
Punggol
Gombak Norite Early Palaeozoic
(540 445 my)
Norite, gabbro Bt. Gombak, Bt.
Panjang, and adjacent
hills
Bukit Timah
Granite
Early to Middle
Triassic
(250 235 my)
granite, granodiorite, adamellite, diorite central Singapore
Island
Jurong Formation Late Triassic to
Early Jurassic
(235 175 my)
red purplish mudstone and sandstone, grey
fossil-rich mudstone and shale, siltstone,
conglomerate, fossil-rich limestone
west and southwest
Singapore Island and
southern islands
Weak rock/Soil formations
Fort Canning
Boulder Bed
Late Cretaceous
(100 65 my)
hard, often red and white, unstratified sandy
silty clay containing many big lens-shaped
to rounded fresh sandstone
central business
district
Old Alluvium Late Tertiary to
Middle
Pleistocene
(5 0.5 my)
dense to cemented muddy sand/gravel with
beds of silt and/or clay
east Singapore
Kallang Formation Late Pleistocene
to Present
(0.14 0 my)
soft marine clay, loose alluvial muddy sand,
loose beach sand, soft peaty and organic
mud, and coral.
all river valleys and
mouths
F
r
o
m

O
l
d

t
o

Y
o
u
n
g
TriTech
Maj or Faul t St r uc t ur es
TriTech
Sea level
Sajahat Formation
Palaeozoic Volcanics
Gombak Norite
Acid magma for
Bukit Timah
Granite
Acid magma for Main
Range Granite
Acid magma from great depths rose during the Late
Palaeozoic (360 250 my)
Hi st or i c al Geol ogi c Set t i ng
Pre-palaezoic rocks
TriTech
Hi st or i c al Geol ogi c Set t i ng
sea level
J urong Formation
Uplift of the Main Range Granite and the Bukit Timah
Granite created a shallow basin for the deposition of
the Jurong Formation during Early Triassic to Early
Jurassic (235 175 my)
Bukit Timah Granite
Main Range Granite
TriTech
sea level
Old Alluvium
Hi st or i c al Geol ogi c Set t i ng
After Early Jurassic (175 my), uplift was minimal and much of the land
mass was above sea level and marine sedimentation ceased. Alluvial
sediments of the Old Alluvium were deposited in a deep faulted
trough during Late Tertiary to Middle Pleistocene (5 to 0.5 my)
Bukit Timah Granite Main Range Granite
TriTech
Hi st or i c al Geol ogi c Set t i ng
Marine Member
Reef Member
Littoral Member
Alluvial Member
Tekong Formation
Transitional
Member
Representing the youngest natural deposits, the high-level beach
sand of the Tekong Formation were deposited about 5000 to 6000
year ago in Holocene times and the marine clay, coral sand, beach
sand, alluvial muddy sand, and peaty clay of the Kallang Formation
continues to be deposited in present times since the Late Pleistocene
(140,000 years to Present).
Bukit Timah Granite
Main Range Granite
TriTech
Sea
Bt Timah
Bt Gombak
Changi Village
Jurong
Tuas
Kallang
Punggol
Sea
Si mpl i f i ed Si ngapor e Geol ogi c al Sec t i on
Bukit Timah Granite (Base)
Gombak Norite
Sajahat Formation
Jurong Formation
Old Alluvium
Kallang Formation
from Tuas (West) to Changi (East)
TriTech
There are about 25 hilly areas with elevation above 40m in the Bukit Timaharea. All abandoned and
operating quarries are located on one of the 25 hilly areas.
There are 15 hilly areas with elevation above 40m in the J urongarea.
Topogr aphi c Feat ur e - Hi l l y Ar eas i n Rel at i on t o
Si ngapor e Roc k s
The advantages of constructing caverns at these hilly areas include:
The hilly areas usually have shallow overburdens, shallow bedrock depths, and good quality
rock mass.
Only horizontal tunnel access or inclined tunnel access are required, resulting in a much lower
construction cost
TriTech
BT Granite area has 25 hills above +40m
elevation (yellow shade)
J urongFormation area has 15 hilly area
above +40m (yellow shade)
Geogr aphi c f eat ur e - Hi l l y Ar eas i n Rel at i on t o
Si ngapor e Roc k s
TriTech
Feat ur es of Si ngapor es Geol ogi c al
For mat i ons
TriTech
Rocks: predominantly granite; less common are
granodiorite, adamellite, and diorite
Mineralogy: quartz (30%), feldspar (60-65%), biotite,
and hornblende (less than 10%)
Texture: medium to coarse grained, light grey but
sometimes pinkish
Age: Early to Middle Triassic (250 235 my)
Buk i t Ti mah Gr ani t e
General
TriTech
Typical Outcrops of Bukit Timah Granite
TriTech
Distribution
It underlies about a third of Singapore Island and the
whole of P. Ubin.
It is recognised as the base rock as it underlies all other
formations.
It was originally formed from a large body of acidic
magma which intruded from great depths into the
Gombak Norite and other older formations such as the
Sajahat Formation and Palaeozoic Volcanics. The older
rocks were eventually removed by erosion and the Bukit
Timah Granite is exposed.
Buk i t Ti mah Gr ani t e
TriTech
Weathering and Bedrock Profile
Weathering: very extensive through mineral
decomposition; depth varies from a few to
80 m with a commonly occurring depth
about 25 m.
Profile: tropical humid soil profile is characteristic;
an undulating rock surface with a sharp
change from residual soil to granite is
usually observed; large boulders are
sometimes present.
Buk i t Ti mah Gr ani t e
TriTech
Strength and Modulus
Compressive: very high; fresh material has average
UCS of 160 MPa with the highest value in
excess of over 300 MPa; weathered
materials have much lower strength
Modulus: average of 70 GPa.
Tensile: about a tenth of UCS values
Criterion: Mohr-Coulomb at low stress level; best
with Hoek-Brown criterion (mi = 30 - 33).
Buk i t Ti mah Gr ani t e
TriTech
Jointing and Rock Mass
Jointing: 4 to 5 joint sets; dominant one is sub-
vertical with a NNW-SSE strike
Joint Surface: usually rough and little weathered
Shear Strength: shear friction angle varying with smooth
joints having angles of about 30
degrees and rough joints up to 70
degrees
Rock Mass: usually good and above-good quality
Buk i t Ti mah Gr ani t e
TriTech
Groundwater and Stress
Permeability: very low within the range of 10
-7
to
10
-9
m/s,; As the granite rock
mass is quite impermeable,
groundwater flow is only
likely in fractured zones and faults
Springs: large groundwater flow and springs can be
found in fault zones (e.g., Sembawang hot
spring)
In-situ
Stresses: high in-situ horizontal stress (about 2 - 3
times vertical stress) in a NNE-SSW
direction
Buk i t Ti mah Gr ani t e
TriTech
Distribution: western and southwestern Singapore Island
and the southern islands.
Age: Late Triassic to Early Jurassic (235 175 my)
Development: sediments from weathered material of older
rocks were deposited in a shallow marine basin
formed between Bukit Timah Granite and the
Main Range Granite and later lithified into rocks.
Through lateral basin compression, they were
uplifted, folded, faulted, and metamorphosed.
J ur ong For mat i on
TriTech
Basin formation of the Jurong Formation (after Redding et al, 1999)
TriTech
Basin uplifting of the Jurong Formation (after Redding et al, 1999)
TriTech
Geological Structure and In-Situ Stresses
Bedding: many beds are thin with some reaching a
few metres in thickness. Weak and strong
beds are often interbedded.
Folding: many folds trend NWW - SEE.
In-situ
Stresses: horizontal stress in NNE-SSW is 2.4 - 2.8
times the vertical stress in some strong
rocks. Folding and high horizontal
stresses are related to regional tectonic
movements.
J ur ong For mat i on
TriTech
TriTech
Lithological Facies
Queenstown: red to purple mudstone and sandstone
Jong: roundstone conglomerate and sandstone
Ayer Chawan: dark grey fossil-rich mudstone, fossil-rich
shale, muddy sandstone, and tuff
Pandan: grey fossil limestone
Rimau: conglomerate and sandstone
St. John: siltstone and fine muddy sandstone
Tengah: muddy sandstone with some conglomerate
Volcanic rocks such as tuff and spilite were added to the Jurong
Formation during volcanic activity.
J ur ong For mat i on
TriTech
Pandan Facies
Besides the Pandan area, limestone is also found at
Pasir Panjang, Seraya, the Banyan Basin in Jurong
Island, Tuas, and many other areas in Jurong.
The limestone facies has been named the Pandan
Facies because cores of fossil-rich limestone recovered
from Pandan Road are the first cores to be described in
detail.
The limestone from some areas has been partially
metamorphised to marble.
J ur ong For mat i on
TriTech
Interbedded
conglomerates and sandstone at Labrador
TriTech
Interbedded
sandstone and fissile shale at Tuas
TriTech
Conglomerate from Kent Ridge (BH 11)
TriTech
Conglomerate and sandstone from NTU
TriTech
Sandstone from Kent Ridge (BH 11)
TriTech
Siltstone from Kent Ridge (BH 2)
TriTech
Siltstone from J urongIsland
TriTech
Tuff from Kent Ridge (BH 13)
TriTech
Marble in contact with siltstone from Kent Ridge (BH 7)
TriTech
Limestone with cavities from Kent Ridge
TriTech
Metamorphism
The Jurong Formation had been subjected to low-
grade metamorphism.
The Pandan Facies were affected more than the
other facies.
The evidence for metamorphism includes:
wide-spread occurrences of cleavage,
foliation, and recrystallization
presence of metamorphic minerals such as
chlorite, sericite, and micas
occurrence of metamorphic rocks such as
slates, phyllite, and marble
J ur ong For mat i on
TriTech
Shale with cleavages from Mount Faber
TriTech
Rock Properties and Quality
Strength: most rocks are weak.
Quality: rock mass quality is usually fair to poor
due to extensive fracturing and low
strength of the rocks.
Variation: rock properties and rock mass quality can
vary rapidly due to folding.
Permeability: intermediate permeability within the range
from 10
-6
to 2x10
-8
m/s due to frequent
fractures.
J ur ong For mat i on
TriTech
Weathering
deep due to humid tropical climate
thickness of residual soil and weathed
zone ranges from a few to 80 m with an
average thickness of 35 m.
karstic features such as solution cavities
may be present in the limestone.
J ur ong For mat i on
TriTech
Groundwater
The groundwater table is located between 5 and 20
m below ground surface.
It is usually present in the zone of residual soil or
completely weathered rock
J ur ong For mat i on
TriTech
Buk i t Ti mah Gr ani t e ver sus J ur ong For mat i on
Properties Bukit Timah Granite Jurong Formation
Distribution
Strength of
Rock
Material
high strength (160 MPa)
excellent medium for hosting
cavern space
low strength (10-160MPa)
still a good medium hosting
cavern space
Thickness of
Overburden
usually around 20 m usually around 25m
Thickness of
Weathered
Zone
usually around 5 m usually around 10 m
Permeability low (usually 10
-7~-9
m/sec)
strong inflow of groundwater is
not expected
water-proof grouting is not
required.
relatively high (usually 10
-6~-
8
m/sec)
strong inflow of groundwater is
expected
water-proof grouting is required.
TriTech
Properties Bukit Timah Granite Jurong Formation
In-situ
Stress
horizontal to vertical stress ratio
is 2 3
high ratio helps stability of
cavern roof and hence affords
larger cavern span
horizontal to vertical stress ratio
is 2.4 - 2.8
high ratio helps stability of
cavern roof and hence affords
larger cavern span
Degree of
Fracturing
massive and more intact (RQD is
usually 75 - 100)
intact rock mass results in better
overall rock mass quality and
lower permeability.
bedded and more fractured (RQD
is usually 20 - 90)
more fractured rock mass results
in poorer rock mass quality and
higher permeability.
Rock Mass
Quality
75% of rock mass is classified as
equal or exceeding good quality
(Q>=10)
98% of rock mass is classified as
equal or exceeding fair (Q>=4)
is slightly better than the rock
mass quality of the Gjovik Gneiss
which hosts the Gjovik Sports
Hall. It has a cavern span of 61
m the worlds largest.
30% of rock mass is classified as
equal or exceeding good quality
(Q>=10)
50% of rock mass is classified as
equal or exceeding fair (Q>=4)
Buk i t Ti mah Gr ani t e ver sus J ur ong For mat i on (Cont d)
TriTech
Properties Bukit Timah Granite Jurong Formation
Cavern
Dimension
span can be 20 40 m with fair
rock supports.
span larger than 40 m and up to
75 m may be possible with sites
having high horizontal to
vertical stress ratios
span can be 20 25 m with
fair rock supports.
span larger than 25 m and up
to 40 m may be possible with
substantial rock support
measures in sites having
favorable geologic conditions
Buk i t Ti mah Gr ani t e ver sus J ur ong For mat i on (Cont d)
TriTech
Distribution and Development
Distribution: mainly on eastern Singapore Island; much
less on northwestern Singapore Island
Thickness: varies from a few tens of meters to more
than 200 meters
Development: made up of sediments brought down by
closely-connected rivers and deposited in
a deep basin in eastern Singapore Island
Age: Late Tertiary to Middle Pleistocene (5 0.5
my)
Ol d Al l uvi um
TriTech
TriTech
Old Alluvium
TriTech
Material and Properties
Materials: dense/cemented muddy sand/gravel with
lenses of silt and/or clay.
Properties: refer to Li, 1999 and Sharma, Chu, and
Zhao, 1999 in Geological and Geotechnical
Features of Singapore: an Overview
Tunneling and Underground Space
Technology, Vol.15, No.4, pp.419 - 431).
Ol d Al l uvi um
TriTech
Ol d Al l uvi um
0 8m
Old
Alluvium
Layer 1
(OA1)
SPT Blow Count (N) 25
Colour: Yellowish, reddish, or greyish
Composition: Clayey and silty sand, clayey silt
Consistency: Loose to medium dense for sand, medium stiff to very
stiff for clay
Water Content, w (%) = 22
Bulk Density,
bulk
(kN/m
3
) = 20.3
Dry Density,
d
(kN/m
3
) = 16.6
Specific Gravity, G
s
= 2.65
Liquid Limit, w
L
(%) = 55
Plastic Limit, w
P
(%) = 23
Plasticity Index, PI (%) = 32
Avg. Undrained Shear Strength, s
u
(kPa) = 100
Cohesion, c (kPa) = 1.9
Friction angle, () = 36.1
Horizontal Permeability, k
h
(10
-8
m/s) = 18.8
Compression Index, C
c
= 0.2
Recompression Index, C
r
= 0.025
E
u
/s
u
= 40 - 400, recommended value: 170
Properties (average values are presented for reference only)
TriTech
Ol d Al l uvi um
8 13 m
Old
Alluvium
Layer 2
(OA2)
SPT Below Count (N) = 26-100
Colour: yellowish brown to light grey or greenish grey
Composition: clayey and silty sand
Consistency: medium dense to very dense for sand; very stiff to
hard for clay
Water Content, w (%) = 18.2
Bulk Density,
bulk
(kN/m
3
) = 20.7
Dry Density,
d
(kN/m
3
) = 17.6
Specific Gravity, Gs = 2.64
Liquid Limit, wL (%) = 49
Plastic Limit, wP (%) = 20
Plasticity Index, PI (%) = 28
Avg. Undrained Shear Strength, s
u
(kPa) = 195
Cohesion, c (kPa) = 8.4
Friction angle, () = 35.9
Horizontal Permeability, k
h
(10
-8
m/s) = 6.4
Compression Index, C
c
= 0.1
Recompression Index, C
r
= 0.02
E
u
/s
u
= 40 - 400, recommended value 170
Properties (average values are presented for reference only)
TriTech
Ol d Al l uvi um
More than
13m
Old Alluvium
Layer 3
(OA3)
SPT Blow Count (N) >100
Colour: light grey to greenish grey
Composition: clayey and silty sand
Consistency: very dense to moderately strong
Water Content, w (%) = 16.3
Bulk Density,
bulk
(kN/m
3
) = 20.3
Dry Density,
d
(kN/m
3
) = 17.8
Specific Gravity, Gs = 2.64
Liquid Limit, wL (%) = 38
Plastic Limit, wP (%) = 19
Plasticity Index, PI (%) = 19
Avg. Undrained Shear Strength, s
u
(kPa) = 362
Cohesion, c (kPa) = 30.3
Friction angle, () = 35.0
Horizontal Permeability, k
h
(10
-8
m/s) = 3.4
Compression Index, C
c
= 0.07
Recompression Index, C
r
= 0.015
E
u
/s
u
= 40 - 400, recommended value 170
Properties (average values are presented for reference only)
TriTech
Distribution and Development
Distribution: extensively found in river valleys, river
mouths, river plains, coastal areas, and
the near offshore.
Thickness: up to 80 m
Development: buried marine clay, beach sand, river
sand, organic peaty mud, and coral have
been deposited during rising sea levels.
They are still being deposited.
Age: Late Pleistocene to Present (0.14 0 my).
Kal l ang For mat i on
TriTech
TriTech
Materials
It consists of sediments with marine, alluvial, littoral, and estuarine
origins. It includes 5 members.
Marine Member: soft grey clays deposited offshore
Alluvial Member: loose muddy sand and sand deposited in river
valleys
Littoral Member: loose muddy sand and sand with shells deposited
on coastal beaches
Transitional Member: soft dark grey organic/peaty clay and clayey
peat deposited in mangrove areas
Reef Member: loose calcareous sand and corals formed offshore
Kal l ang For mat i on
TriTech
Singapore Marine Clay
TriTech
Properties of Singapore Marine Clay
Properties: refer to Sharma, Chu, and Zhao, 1999 in
Geological and Geotechnical Features of
Singapore: an Overview, Tunneling and
Underground Space Technology, Vol.15,
No.4, pp.419 - 431
Kal l ang For mat i on
TriTech
Gombak Norite
Distribution: Bukit Gombak, Bukit Panjang, and
adjacent hills
Rocks: norite and gabbro (coarse-grained basic
igneous rocks consisting of interlocked
calcium-rich plagioclase minerals with
pyroxene minerals)
Properties: high strength and modulus (similar to the
properties of Bukit Timah Granite)
Ot her Geol ogi c al For mat i ons
TriTech
Sajahat Formation
Distribution: P. Tekong, P. Sajahat, Punggol.
Rocks: Well lithified quartzite, quartz sandstone,
and argillite
Age: Lower Paleozoic (540 445 my)
It is the oldest formation in Singapore.
Ot her Geol ogi c al For mat i ons
TriTech
Fort Canning Boulder Bed
Distribution: Central business district, i.e. underlying an area bounded by Fort Canning
Park, The Cathay Building, Middle Road and Raffles City.
Rocks: Sandstone or quartzite boulders in hard matrix of sandy clayey silt or sandy silty
clay coloured in red, yellow and white.
Age: Late Cretaceous (older than the Old Alluvium but younger than the Jurong
Formation)
TriTech
Desc r i pt i on of Roc k s and Soi l s f or
Ci vi l Engi neer i ng Pr ac t i c e i n
Si ngapor e
TriTech
Desc r i pt i on of Roc k s and Soi l s f or Ci vi l
Engi neer i ng Pr ac t i c e i n Si ngapor e
Geo-
Notation
Origin Description Geological Formation
B BEACH loose muddy sand and sand
with some gravel, coral, and
shells.
KALLANG (Littoral Member)
and TEKONG.
E ESTUARINE soft dark grey peaty/organic
clay and clayey peat
KALLANG (Transitional
Member)
F FLUVIAL soft mud, loose muddy sand
and sand
KALLANG (Alluvial
Member) and TEKONG
F1 granular sediments of silt,
sandy silt, silty sand, sand
Bed of Alluvial Member of
KALLANG
F2 cohesive sediments of silty
clay, sandy clay
Bed of Alluvial Member of
KALLANG
M SHALLOW
MARINE
soft blue or grey clay with
some shells
KALLANG (Marine Member)
TriTech
Desc r i pt i on of Roc k s and Soi l s f or Ci vi l
Engi neer i ng Pr ac t i c e i n Si ngapor e (Cont d)
Geo-
Notation
Origin Description Geologic Formation
O FLUVIAL dense to cemented muddy
sand/gravel with beds of
silt and/or clay
OLD ALLUVIUM
FC COLLUVIAL hard, unstratified, often red
and white coloured silty
clay containing many big
lens-shaped and rounded
fresh boulders.
FORT CANNING
BOULDER BED
S SHALLOW
MARINE
red purplish mudstone and
sandstone; grey fossil-rich
mudstone, fossil-rich shale,
and tuff; fossil-rich
limestone; coarse
sandstone and
conglomerate; siltstone
and fine sandstone; and
muddy sandstone.
J URONG
(Queenstown, J ong, Ayer
Chawan, Pandan, Rimau,
St J ohn, and Tengah
Facies)
G PLUTONIC Granite, granodiorite,
adamellite, diorite
BUKIT TIMAH GRANITE
TriTech
Weat her i ng Cl assi f i c at i on of Roc k s
f or
Ci vi l Engi neer i ng Pr ac t i c e i n
Si ngapor e
TriTech
Weat her i ng Cl assi f i c at i on f or Buk i t Ti mah Gr ani t e &
Gombak Nor i t e
i n ac c or danc e w i t h Appr oac h 2 i n BS Code 5930 Sec t i on 6 (1999)
Geo-
Notation
Grade /
Class
Classification Basis for assessment
G(1) I fresh intact strength unaffected by weathering; not
broken easily by hammer; rings when stuck with
hammer; no visible discoloration.
G(II) II slightly
weathered
not broken easily by hammer; rings when stuck
with hammer; fresh rock colors generally retained
but stained near joint surfaces.
G(III) III moderately
weathered
cannot be broken by hand but easily broken by
hammer; makes a dull or slight ringing sound
when stuck with hammer; stained throughout.
G(IV) IV highly
weathered
core can be broken by hand; does not slake in
water; completely discoloured.
G(V) V completely
weathered
original rock texture preserved; can be crumbled
by hand; slakes in water; completely discoloured.
G(VI) VI residual soil original rock structure completely degraded to a
soil with none of the original fabric remains; can
be crumbled by hand
TriTech
Weat her i ng of Buk i t Ti mah Gr ani t e
Mandai
TriTech
Geo-
Notation
Grade /
Class
Classification Basis for assessment
S(I) I fresh intact strength unaffected by weathering
S(II) II slightly
Weathered
slightly weakened with slight discoloration particularly
along joints
S(III) III moderately
weathered
considerably weakened & discolored; larger pieces
cannot be broken by hand (RQD generally > 0 but
RQD should not be used as the major criterion for
assessment)
S(IV) IV highly
weathered
core can be broken by hand; generally highly to very
highly fractured but majority of sample consists of
lithorelics (RQD generally is 0 but RQD should not be
used as the major guide for assessment). For
siltstone, shale, sandstone, quartzite, and
conglomerate, the slake test can be used to
differentiate between Grade V ( slake) and Grade IV
(does not slake)
S(V) V completely
weathered
rock weathered down to soil-like material but bedding
still intact; material slakes in water.
S(VI) VI residual soil rock degraded to a soil in which none of the original
bedding remains.
Weat her i ng Cl assi f i c at i on f or J ur ong For mat i on
i n ac c or danc e w i t h Appr oac h 2 i n BS Code 5930 Sec t i on 6 (1999)
TriTech
Beds of weathered rocks of Jurong Formation at
Outram Park
TriTech
Steeply dipping beds of weathered Jurong Formation
rocks at Outram Park
TriTech
Weat her i ng Cl assi f i c at i on of Ol d Al l uvi um
i n ac c or danc e w i t h Appr oac h 4 i n BS Code 5930 Sec t i on 6 (1999)
Geo-
Notation
Grade /
Class
Classification Characteristics Indicative SPT
Blows/300mm
(not used in
isolation)
O(A) A unweathered original strength > 50 (cannot
usually be
penetrated by
CPTs with 20t
load capacity)
O(B) B partially
weathered
slightly reduced strength
O(C) C distinctly
weathered
further weakened 30 - 50
O(D) D destructed greatly weakened
often mottled; bedding disturbed
10 - 30
O(E) E residual soil no bedding remains < 10
TriTech
Weathered Old Alluvium, Hougang
Class C, SPT 30 to 50
Class E, SPT <10
Class D, SPT 10 to 30
TriTech
Updat ed Geol ogi c al Maps & Repor t
2
nd
Edi t i on, DSTA (2009)
TriTech
Updat ed Geol ogi c al Maps & Repor t
Published in 2009 by DSTA
6 maps (1:25,000) accompany a report titled Geology of
Singapore
New geologic information on:
Pandan Facies
Fort Canning Boulder Bed
Metamorphism
Deposition of the Jurong Formation (an alternative view)
Depositional history of the Kallang Formation
Recent topography and extent of reclaimed land and coastline
Subsurface occurrence of the Pandan Facies and the Fort
Canning Boulder Bed illustrated on cross-sections
Engineering properties of the major rock types in Singapore
Purchase:
DSTA Office, 71 Science Park Drive, Singapore 118253

You might also like