Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
179 views

Shape Accel Array

Shape Accel Arrays (SAAs) were installed at Tottenham Court Road Station to measure retaining wall deflection during excavation. SAAs are rope-like arrays of sensors that can measure deformation or vibration with high resolution and accuracy. Six SAAs were installed along the diaphragm wall and provided continuous monitoring, allowing refinement of trigger levels. SAA data, with corrections from manual surveys, detected no trigger breaches during excavation to the final level, enabling cost savings by omitting level P5 props. SAAs proved more cost-effective and provided better data than traditional inclinometers.

Uploaded by

dirafly3566
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
179 views

Shape Accel Array

Shape Accel Arrays (SAAs) were installed at Tottenham Court Road Station to measure retaining wall deflection during excavation. SAAs are rope-like arrays of sensors that can measure deformation or vibration with high resolution and accuracy. Six SAAs were installed along the diaphragm wall and provided continuous monitoring, allowing refinement of trigger levels. SAA data, with corrections from manual surveys, detected no trigger breaches during excavation to the final level, enabling cost savings by omitting level P5 props. SAAs proved more cost-effective and provided better data than traditional inclinometers.

Uploaded by

dirafly3566
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 22

ǮŠ‡•‡‘ˆŠƒ’‡Accel  Arrays  

(SAAs)  for  Measuring  Retaining  


ƒŽŽ‡ˆŽ‡…–‹‘ǯ  
Written  by:  
R.  Lipscombe,  C.  Carter,  O.  Perkins,  P.  Thurlow,    
S.  Guerrero  
 
Presented  by:  
R.  Lipscombe  of  Keller  Getec  
Contents  
Introduction  
What  are  Shape  Accel  Arrays?  
Tottenham  Court  Road  Station    
Installation  of  the  Shape  Arrays  
The  site  settlement  management  plan  
Movement  of  the  diaphragm  wall  
A  Value  Engineering  proposal    
Summary  

2
Introduction  

Measurement  of  deflection  of  


diaphragm  walls  is  critical.  
Usual  practice  to  use  inclinometers.  
Inclinometers  are  sufficient  but  
limited.  
Shape  Arrays  are  relatively  new  to  
the  UK  construction  industry.  

3
Shape  Accel  Arrays  Ȃ  What  Are  They?  
Rope-­‐like  array  of  sensors  and  
microprocessors.  
Can  be  used  to  measure  deformation  
or  vibration.  
Made  up  of  segments,  each  segment  
contains  three  MEMS  accelerometers.  
Joints  between  segments  can  move  in  
any  direction  but  can  not  twist.  

4
Shape  Accel  Arrays  Ȃ  What  Are  They?  
Resolution:   2  arc  seconds  
Accuracy:   ±0.5mm/32m  when  casing    grouted  
±1.5mm/32m  when  casing  not  grouted  
Pressure:   tested  to  100m  depth  water  
Vibration:   can  measure  ±2G  

5
Shape  Accel  Arrays  Ȃ  What  Are  They?  
TO  ADD  Ȃ  SAA  DEMONSTRATION  VIDEO  

6
The  New  Tottenham  Court  Road  Station  

7
The  New  Western  Ticket  Hall  

8
A  Cross-­‐Section  Through  The  WTH  
Made  Ground   P1  C/L  122.400mATD  
River  Terrace   NORTH   Diagonal  Prop  
Gravels   P2  C/L  117.200mATD  

Waling  Beam  
P3  C/L  111.900mATD  
P4  C/L  109.070mATD  
London  Clay  
Prop  

SOUTH  

%DVH§mATD  

6HUYLFH7UHQFK§
95.210mATD  

Lambeth  Group  

Thanet  Sand  

Chalk   9
 
Installation  of  the  SAAs  

SAA800003   SAA800004  
SAA800001  

SAA800005  

SAA800006  
SAA800012   SOUTH  
NORTH  
SAA800007  

SAA800011   SAA800010  

 
 
10
Installation  of  the  SAAs  

11
The  Site  Settlement  Management  Plan  
AMBER  and  RED  triggers  of  displacement  of  the  
D-­‐Wall  were  provided  by  Crossrail.  
These  were  calculated  by  the  designer,  Arup  
Atkins.  
A  BLACK  trigger  is  reserved  for  when  the  stability  
of  the  excavation  is  deemed  at  risk.  
Observed  displacement  compared  directly  with  
trigger  values.  
Set  procedures  to  follow  in  case  of  a  trigger  
breach.  

12
 ǥǤ  

13
A  Value  Engineering  Proposal  
Based  upon  the  observational  method.  
Designer  undertook  a  back  analysis  of  observed  movement  to  P3  and  P4  level.  
Calculations  refined,  and  new  triggers  defined  for  remaining  excavation.  
AMBER  trigger  now  based  upon  a  run  with  softened  parameters.  
RED  trigger  assessed  using  the  original  parameters  and  design  methods,  but  
also  included  a  berm  and  bay  construction  sequence.  

14
15
Movement  of  the  Base  of  the  Diaphragm  Wall  
Base  of  the  SAA  was  taken  as  fixed.  
In  reality  the  base  is  moving  into  the  excavation  and  
the  top  is  not  moving  as  much.  
Manual  surveys  of  3D  Geodetic  Prisms  at  the  top  of  
the  D-­‐Wall  in  line  with  the  SAAs  took  place.  
From  this  a  correction  factor  was  calculated  that  
was  applied  to  the  SAA  readings.  

16
17
Comparison  to  the  Manual  Inclinometers  
Each  manual  inclinometer  took  around  thirty  
minutes  to  read.  
Manual  inclinometers  require  a  trained  
technician  to  read.  
Some  of  the  inclinometer  casing  was  within  the  
gantry  crane  beam,  which  had  to  be  stationary  
whilst  readings  were  taken.    

18
19
To  Summarise  
Shape  Arrays  have  shown  advantages  in  terms  of  :  
Cost  
Time  
Quality  of  data  
Frequency  of  readings.  
Their  use  has  enabled  level  P5  Props  to  be  omitted.  
This  has  provided  significant  cost  savings,  and  a  reduction  in  the  program  of  
26  days.  
Corrections  to  the  data  were  calculated  from  manual  surveying,  ensuring  no  
triggers  were  breached.  

20
The  Western  Ticket  Hall  Ȃ  January  2013  

21
Thank  you  for  listening,  any  
questions?  

22

You might also like