Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 286 views

    SAMSUNG YP-Q2 Training Book PDF

    Uploaded by

    avrelec
    This document provides technical information about the YP-Q2 MP3 player, including its concept, specifications, diagrams, troubleshooting tips, and disassembly instructions. The YP-Q2 has features like MP3/WMA/Ogg playback, an FM radio, voice recording, and a USB interface. Diagrams show the circuit board layout and component connections. Troubleshooting guides address issues like no power, charging problems, and sound issues. The disassembly process is outlined in multiple steps. Firmware updates can be installed by running an updater program on a connected PC.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    SAMSUNG YP-Q2 Training Book PDF

    Uploaded by

    avrelec
    286 views51 pages
    This document provides technical information about the YP-Q2 MP3 player, including its concept, specifications, diagrams, troubleshooting tips, and disassembly instructions. The YP-Q2 has features like MP3/WMA/Ogg playback, an FM radio, voice recording, and a USB interface. Diagrams show the circuit board layout and component connections. Troubleshooting guides address issues like no power, charging problems, and sound issues. The disassembly process is outlined in multiple steps. Firmware updates can be installed by running an updater program on a connected PC.

    Original Title

    SAMSUNG_YP-Q2_Training_Book.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides technical information about the YP-Q2 MP3 player, including its concept, specifications, diagrams, troubleshooting tips, and disassembly instructions. The YP-Q2 has features like MP3/WMA/Ogg playback, an FM radio, voice recording, and a USB interface. Diagrams show the circuit board layout and component connections. Troubleshooting guides address issues like no power, charging problems, and sound issues. The disassembly process is outlined in multiple steps. Firmware updates can be installed by running an updater program on a connected PC.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    286 views51 pages

    SAMSUNG YP-Q2 Training Book PDF

    Uploaded by

    avrelec
    This document provides technical information about the YP-Q2 MP3 player, including its concept, specifications, diagrams, troubleshooting tips, and disassembly instructions. The YP-Q2 has features like MP3/WMA/Ogg playback, an FM radio, voice recording, and a USB interface. Diagrams show the circuit board layout and component connections. Troubleshooting guides address issues like no power, charging problems, and sound issues. The disassembly process is outlined in multiple steps. Firmware updates can be installed by running an updater program on a connected PC.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 51

    1

    TRAINNING MANUAL
    TRAINNING MANUAL
    SAMSUNG ELECTRONICS
    MP3 Business Team
    Buyking Project
    MODEL : YP-Q2 MODEL : YP-Q2 MODEL : YP-Q2 MODEL : YP-Q2
    2
    Contents
    Contents


    CONCEPT
    CONCEPT


    Accessory
    Accessory


    Main SPEC
    Main SPEC


    Illustration
    Illustration


    About Smart KEY
    About Smart KEY


    Block diagram
    Block diagram


    Circuit diagram
    Circuit diagram


    Trouble shooting
    Trouble shooting


    Disassemble method
    Disassemble method


    UPDATE
    UPDATE


    ASSY CODE
    ASSY CODE
    3
    YP-Q2 CONCEPT
    YP-Q2 CONCEPT
    Q1
    Q2
    Easy accessibility
    (Heavy users for diverse features)
    User Button for a quick access
    with Smoother controll
    Innovative User Interface
    (Preference for Premium Products)
    Smartly search contents
    Automatic EQ setting with genre
    Powerful capability
    (for Core Value )
    strong battery life(50Hrs)
    4
    YP-Q2 Accessory
    YP-Q2 Accessory
    Basic accessory
    5
    YP-Q2 Main SPEC
    YP-Q2 Main SPEC
    SPEC
    Function
    MP3, WMA, Ogg, FLAC
    JPEG Playback, txt
    Music videos in MPEG4
    DNSe3.0( Dynamic Natural Sound Effect)
    - 12 sound modes : ex) Normal/Classic/Jazz/Rock ..
    FM Tuner -Auto preset, preset
    FM Recording(Quality : 64kbps, 96kbps, 128kbps)
    Storage
    4GB/8GB
    LCD
    2.4 QVGA TFT LCD
    Resolution : 320x240[QVGA]
    PC interface
    USB 2.0
    6
    YP-Q2 Main SPEC.
    YP-Q2 Main SPEC.
    SPEC
    Extra features
    Album Image Display
    Text Viewer
    Clock Function
    Accessory
    Earphone(EP-380)
    USB Cable
    System
    Requirement
    Over Windows 2000
    7
    Illustration YP-Q2
    Illustration YP-Q2
    1. buttons
    8
    Illustration YP-Q2
    Illustration YP-Q2
    2. Button functions
    9
    About Smart KEY
    About Smart KEY
    10
    About Smart KEY
    About Smart KEY
    11
    YP-Q2 Block diagram
    YP-Q2 Block diagram
    12
    Circuit diagram #1 - MAIN
    Circuit diagram #1 - MAIN
    13
    Circuit diagram #2- MEMORY
    Circuit diagram #2- MEMORY
    14
    Circuit diagram #3 SWITCH
    Circuit diagram #3 SWITCH
    15
    Circuit diagram #4- LCD
    Circuit diagram #4- LCD
    16
    Circuit diagram #5 USB/PBA
    Circuit diagram #5 USB/PBA
    17
    Circuit diagram #6- AUDIO
    Circuit diagram #6- AUDIO
    18
    Circuit diagram #7- FM
    Circuit diagram #7- FM
    19
    Circuit board (Top)
    Circuit board (Top)
    20
    Circuit board(Bottom)
    Circuit board(Bottom)
    21
    YP-Q2 [TOP SIDE]
    YP-Q2 [TOP SIDE]
    1 GROUND
    2 GROUND
    3 GROUND
    4 T_RESET
    5 T_DATA
    6 T_CLK
    7 VCC
    8 VCC
    1 GND
    2 LCD_CE
    3 LCD_RS
    4 LCD_WR
    5 LCD_RD
    6 LCD_D[0]
    7 LCD_D[1]
    8 LCD_D[2]
    9 LCD_D[3]
    10 LCD_D[4]
    11 LCD_D[5]
    12 LCD_D[6]
    13 LCD_D[7]
    14 LCD_D[8]
    15 LCD_D[9]
    16 LCD_D[10]
    17 LCD_D[11]
    18 LCD_D[12]
    Touch PAD Connector
    LCD CONNECTOR
    TOP SIDE TOP SIDE TOP SIDE TOP SIDE
    LCD CONNECTOR LCD CONNECTOR LCD CONNECTOR LCD CONNECTOR
    TOUCHG PAD TOUCHG PAD TOUCHG PAD TOUCHG PAD
    CONNECTOR CONNECTOR CONNECTOR CONNECTOR
    1
    40
    20
    21
    21 LCD_D[15]
    22 LCD_RST
    23 GND
    24 VDD_IO
    25 VDD_IO
    26 GND
    27 VDD_IO
    28 VDD_IO
    29 GND
    30 LED4
    31 LED1
    32 LED2
    33 LED3
    34 VOUT(LED +)_
    22
    YP-Q2 [BOTTOM SIDE]
    YP-Q2 [BOTTOM SIDE]
    1 GROUND
    2 R-CH
    3 L-CH
    1 BAT ID
    2 UART DETECT
    3 VCC [IO 2.8V]
    4 ADAPTOR INPUT
    5 ADAPTOR INPUT
    6 NC
    7 CRADLE DETECT
    8 NC
    9 NC
    10 USB D-
    11 NC
    12 GROUND
    13 UART RX
    14 UART TX
    15 USB D+
    16 USB POWER
    17 LINE OUT R
    18 LINE OUT L
    19 GROUND
    EAR JACK
    USB JACK
    BOTTOM SIDE BOTTOM SIDE BOTTOM SIDE BOTTOM SIDE
    1 GROUND
    2 VCC
    BATTERY
    CONNECTOR
    FLASH IC FLASH IC FLASH IC FLASH IC
    SDRAM IC SDRAM IC SDRAM IC SDRAM IC
    MICOM IC MICOM IC MICOM IC MICOM IC
    USB JACK USB JACK USB JACK USB JACK EAR JACK EAR JACK EAR JACK EAR JACK
    BATTERY BATTERY BATTERY BATTERY
    CONNECTOR CONNECTOR CONNECTOR CONNECTOR
    23
    Trouble shooting #1-1
    Trouble shooting #1-1
    Refer to wave pattern
    image of page24
    LCD Back light problem
    24
    LCD Back light problem
    Trouble shooting #1-2
    Trouble shooting #1-2
    Check H IG H LEV EL
    Point IC400 Pin 2
    Result Check whether enable signal is
    flowed.
    : Change Low -> High State
    IC400
    LCD Connector
    1) If the LCD backlight doesnt work, check backlight timing at first.
    2) Check whether LCD Backlight connection was cut..
    25
    Trouble shooting #2-1
    Trouble shooting #2-1
    Refer to wave pattern
    image of page26
    Refer to wave pattern
    image of page26
    No power problem
    26
    No power problem
    1) When switch on, check the clock oscillating.
    2) Check the operation voltages(1.5V, 1.8V, 3.1V)
    Check the clock oscillating
    Trouble shooting #2-2
    Trouble shooting #2-2
    1)
    2) Check 3.1V, 1.8V and 1.5V
    Point X100
    result Check Signal 24MHz
    Power Capacitor
    Crystal & Load
    Capacitor

    27
    Trouble shooting #3-1
    Trouble shooting #3-1
    Electric charging problem
    Refer to wave pattern
    image of page28
    28
    Electric charging problem
    1) When USB is connected, Check that SET turns on normally.
    2) Because of Charger IC in the SET, you can check that charging is possible in
    the LCD screen. Especially when USB is connected without battery, it
    must display Fully charged on the LCD screen
    Point Voltage of Capacitor
    result 1.5V, 1.8V, 3.1V
    1)
    Check 3.1V, 1.8V, 1.5V
    Capacitor
    2)
    Trouble shooting #3-2
    Trouble shooting #3-2
    29
    Trouble shooting #4-1
    Trouble shooting #4-1
    Refer to wave pattern
    image of page30
    FM radio reception
    30
    FM radio reception
    1) Check whether clock of 32.768KHz inputted by FM Tuner is inputted properly.
    2) Check I2C interface Signal (General square wave).
    Check 32.768KHz
    1)
    2)
    Check I2C
    Point IC700 PIN1
    Result Check clock of 32.768KHz
    I2 Line Pull-up resistance
    Crystal & Load
    Capacitor
    Trouble shooting #4-2
    Trouble shooting #4-2
    31
    Trouble shooting #5-1
    Trouble shooting #5-1
    Refer to wave pattern
    image of page32
    No MIC problem
    32
    No MIC problem
    1) Check bias voltage of Mic remains on high level normally, by IC604 point.
    2) Check state of mic product.
    Check MIC Bias
    1)
    Point IC604 PIN1
    result Check bias voltage level
    when it is Voice Recording
    mode.
    MIC product
    Trouble shooting #5-2
    Trouble shooting #5-2
    33
    Trouble Shooting #6-1
    Trouble Shooting #6-1
    sound problem
    Refer to wave pattern
    image of page34
    34
    sound problem
    1) Check the VDDA voltage inputted to CODEC is high level normally.
    Check 1.8V 1)
    Point C127, C137
    result Check 1.8V DC voltage
    Capacitor of VDDA lline
    Trouble shooting #6-2
    Trouble shooting #6-2
    35
    Trouble Shooting #7
    Trouble Shooting #7
    Touch PAD problem
    36
    Disassembly method #1
    Disassembly method #1
    1) 2)
    3)
    Detach FPCB from the connector of
    the touch pad.

    To disassemble the body, Poke the


    MIC hole with a fine tool.
    1 11 1
    2 22 2
    Slightly pressing to separate the
    front window.
    37
    Disassembly method #2
    Disassembly method #2
    4) 5)
    6)
    Lift the LCD, and separate it from
    the body.
    Unscrew these five spots. slightly press the both sides of
    Middle to separate it from the
    hook.
    38
    Disassembly method #3
    Disassembly method #3
    7) 8)
    9)
    1 11 1
    2 22 2
    By separating it from earphone part
    hook, you can separate middle
    easily.
    Separate PCB from the body, and also
    separate its battery carefully.
    Finish disassemble
    39
    Disassembly drawing
    Disassembly drawing
    40
    UPDATE #1
    UPDATE #1[Recovery update] [Recovery update]
    A. To update this model, you need 4 files under Recovery folder. A. To update this model, you need 4 files under Recovery folder.
    A. To update this model, you need 4 files under Recovery folder. A. To update this model, you need 4 files under Recovery folder.
    B. Execute YP-Q2 Updater.exe( ) file, check the following screen manual. B. Execute YP-Q2 Updater.exe( ) file, check the following screen manual.
    B. Execute YP-Q2 Updater.exe( ) file, check the following screen manual. B. Execute YP-Q2 Updater.exe( ) file, check the following screen manual.
    41
    UPDATE # 2
    UPDATE # 2
    C. Connect YP-Q2 with a PC, keep pressing the user key, press the reset key.(hole) C. Connect YP-Q2 with a PC, keep pressing the user key, press the reset key.(hole)
    C. Connect YP-Q2 with a PC, keep pressing the user key, press the reset key.(hole) C. Connect YP-Q2 with a PC, keep pressing the user key, press the reset key.(hole)
    1) Connect YP-Q2 with a PC.
    2) Keep pressing the user key
    3) With doing 2), press the reset key.
    42
    UPDATE # 3
    UPDATE # 3
    D. PC execute the program, displaying start button, D. PC execute the program, displaying start button,
    Click the start button to format the set and update the firmware. Click the start button to format the set and update the firmware.
    D. PC execute the program, displaying start button, D. PC execute the program, displaying start button,
    Click the start button to format the set and update the firmware. Click the start button to format the set and update the firmware.
    <Ready to update the set>
    43
    UPDATE # 4
    UPDATE # 4
    E. If message emerges on PC screen as below, press the button E. If message emerges on PC screen as below, press the button
    after a few seconds, to finish upgarade press the button after a few seconds, to finish upgarade press the button
    E. If message emerges on PC screen as below, press the button E. If message emerges on PC screen as below, press the button
    after a few seconds, to finish upgarade press the button after a few seconds, to finish upgarade press the button
    44
    UPDATE # 5
    UPDATE # 5
    E. E. Press the power key to turn off the set . Press the power key to turn off the set .
    F. F. Wait until the message that Updating Firmware emerges on the screen. Wait until the message that Updating Firmware emerges on the screen.
    E. E. Press the power key to turn off the set . Press the power key to turn off the set .
    F. F. Wait until the message that Updating Firmware emerges on the screen. Wait until the message that Updating Firmware emerges on the screen.
    <Notice>
    #. Be careful not to finish this process by force,
    like pressing reset button in progress.
    45
    UPDATE
    UPDATE
    [Normal update]
    [Normal update]
    <Notice>
    #. Simple update is at hand when the set functions as USB port correctly.
    #. Two method according to MTP mode, UMS(MSC) mode as below.
    1) Connect the set with USB
    2) Search and copy q2-fw.dat file
    under Root directory folder
    3) After power off, upgrade starts
    with a message as below.
    <MTP mode> - Windows media player 11
    If you have the Windows Media player 10,
    copy the q2-fw.dat file into Data directory
    46
    UPDATE
    UPDATE
    [Normal update]
    [Normal update]
    <Notice>
    #. Simple update is at hand when the set functions as USB port correctly.
    #. Two method according to MTP mode, UMS(MSC) mode as below.
    1) Connect the set with USB
    2) Search and copy q2-fw.dat file
    under Root directory folder
    3) After power off, upgrade starts
    with a message as below.
    <UMS(MSC) mode>
    47
    UPDATE
    UPDATE
    [config.dat]
    [config.dat]
    <Notice>
    #. If additional areas are required to be set, add the config.dat file
    by each method according to MTP mode, UMS mode as below.
    2) Search and copy config.dat file
    under Root directory folder
    3) After updating,
    Check in Menusetting system
    about firmware
    <MTP mode> - Windows media player 11
    If you have the Windows Media player 10,
    copy the config.dat file into Data directory
    1) Connect the set with USB
    48
    UPDATE
    UPDATE
    [config.dat]
    [config.dat]
    2) Search and copy config.dat file
    under Root directory folder
    <Notice>
    #. If additional areas are required to be set, add the config.dat file
    by each method according to MTP mode, UMS mode as below.
    3) After updating,
    Check in Menusetting system
    about firmware
    <UMS mode>
    1) Connect the set with USB
    49
    ASSY CODE
    ASSY CODE
    ITEM YP-Q2 CODE YP-Q2 CODE YP-Q2 CODE YP-Q2 CODE
    PCB ASS PCB ASS PCB ASS PCB ASSY YY Y
    AH92-02966D / 4GB
    AH92-02966E / 8GB
    AH92-02966F / 16GB (plan)
    BATTERY BATTERY BATTERY BATTERY
    AH43-00023A
    LCD LCD LCD LCD AH07-00244A
    TOUCH PAD TOUCH PAD TOUCH PAD TOUCH PAD AH97-03040A
    KEY FPCB KEY FPCB KEY FPCB KEY FPCB AH97-02537A
    50
    Quiz about YP-Q2
    Quiz about YP-Q2
    1. How long can I listen to music with YP-Q2?
    30Hrs 40Hrs 50Hrs 60Hrs
    2.Which key is called innovate key?
    play key hold key reset key smart key
    3. What is NOT basic accessory of YP-Q2 ?
    YP-Q2 set earphone manual CD USB cable
    4. What is YP-Q2 LCD resolution ?
    240120 320240 360120 360240
    5. How many EQ mode in YP-Q2 ?
    6 8 10 12
    51
    Answer
    Answer
    1. How long can I listen to music with YP-Q2?
    30Hrs 40Hrs 50Hrs 60Hrs
    2.Which key is called innovate key?
    play key hold key reset key smart key
    3. What is NOT basic accessory of YP-Q2 ?
    YP-Q2 set earphone manual CD USB cable
    4. What is YP-Q2 LCD resolution ?
    240120 320240 360120 360240
    5. How many EQ mode in YP-Q2 ?
    6 8 10 12

    You might also like