This document provides information on scoring past SPM chemistry paper 3 questions from years 2003-2008. It includes sample answers and scoring guidelines for two questions from the 2007 paper. The first question involves a experiment on the temperature change during chemical reactions and drawing conclusions from results. The second question involves planning an experiment to determine the effect of metal position in an electrochemical series on cell voltage. Scoring guidelines provide details on what is required to earn each point, such as labeling axes correctly or stating variables in an experiment.
This document provides information on scoring past SPM chemistry paper 3 questions from years 2003-2008. It includes sample answers and scoring guidelines for two questions from the 2007 paper. The first question involves a experiment on the temperature change during chemical reactions and drawing conclusions from results. The second question involves planning an experiment to determine the effect of metal position in an electrochemical series on cell voltage. Scoring guidelines provide details on what is required to earn each point, such as labeling axes correctly or stating variables in an experiment.
This document provides information on scoring past SPM chemistry paper 3 questions from years 2003-2008. It includes sample answers and scoring guidelines for two questions from the 2007 paper. The first question involves a experiment on the temperature change during chemical reactions and drawing conclusions from results. The second question involves planning an experiment to determine the effect of metal position in an electrochemical series on cell voltage. Scoring guidelines provide details on what is required to earn each point, such as labeling axes correctly or stating variables in an experiment.
This document provides information on scoring past SPM chemistry paper 3 questions from years 2003-2008. It includes sample answers and scoring guidelines for two questions from the 2007 paper. The first question involves a experiment on the temperature change during chemical reactions and drawing conclusions from results. The second question involves planning an experiment to determine the effect of metal position in an electrochemical series on cell voltage. Scoring guidelines provide details on what is required to earn each point, such as labeling axes correctly or stating variables in an experiment.
YEAR: 2008 YEAR: 2007 YEAR: 2006 YEAR: 2005 YEAR: 2004 YEAR: 2003 2 CHEMI STRY PAPER 3 4541/3 No. 1 No. 2 No. 1 No. 2 PART 3 Past SPM Question Scoring Scoring SPM Paper 3 2007 3 CHEMI STRY PAPER 3 4541/3 Question No. 1 Question No. 2 [Click button to see the question] PART 3 4 SPM 2007 Question no. 1 1(a)(i) : Able to read all reading accurately to one decimal point with unit. Sample answer: CHEMI STRY PAPER 3 4541/3 Tips to write a good report: Experiment 1 28.0 o C 36.0 o C Experiment II 29.0 o C 25.0 o C Experiment III 27.0 o C 32.0 o C Experiment IV 30.0 o C 27.0 o C PART 3 5 SPM 2007 Question no. 1 1(a)(ii) : Able to construct a table that contains the following information. CHEMI STRY PAPER 3 4541/3 Tips to write a good report: Sample answer; 1. Heading in the table: Experiment, Initial temperature, Highest/Lowest temperature 2. Transfer all temperature reading from (a)(i) correctly 3. With unit at heading PART 3 6 SPM 2007 Question no. 1 Sample answer: CHEMI STRY PAPER 3 4541/3 Tips to write a good report: Experiment Initial temperature / o C Highest / Lowest temperature / o C I / 1 28.0 36.0 II / 2 29.0 25.0 III / 3 27.0 32.0 IV / 4 30.0 27.0 PART 3 7 SPM 2007 Question no. 1 1(a)(iii) : Able to make correct classification for the four experiments. Sample answer: CHEMI STRY PAPER 3 4541/3 Tips to write a good report: Exothermic reaction Endothermic reaction I II III IV PART 3 8 SPM 2007 Question no. 1 1(b)(i) : Able to give any three things correctly that must be kept constant. Sample answer: 1. volume of water 2. polystyrene cups 3. thermometers 4. mass of sodium hydroxide 5. reject: amount, quantity 6. size of cups 7. sodium hydroxide and water CHEMI STRY PAPER 3 4541/3 Tips to write a good report: PART 3 9 SPM 2007 Question no. 1 1(b)(ii) :Able to state the hypothesis accurately Sample answer: 1. The reaction between sodium hydroxide and water is an exothermic / endothermic reaction. 2. The reaction between NaOH and water results in increase/decrease in temperature. 3. When NaOH dissolves/added in water, it increases/decreases in temperature/released heat/absorbed heat Tips to write a good report: CHEMI STRY PAPER 3 4541/3 PART 3 10 SPM 2007 Question no. 1 1(c)(i) :Able to state; Dropped/decreased 4 o C // - 4 o C // 29 25 o C Able to state two correct reasons; Sample answer: 1. Heat/energy is absorbed // Endothermic reaction 2. The energy in product is more than the energy in reactants 3. The heat/energy absorbed during bond breaking is greater than the heat/energy released during the bond making. CHEMI STRY PAPER 3 4541/3 Tips to write a good report: PART 3 11 SPM 2007 Question no. 1 1(c)(ii) : Able to give the operational definition accurately by stating the following three information. - The temperature decreases // The temperature goes down/dropped - Endothermic reaction - Heat/energy absorbed Sample answer: The decrease in temperature shows that endothermic reaction happens where heat/energy is absorbed from the surroundings CHEMI STRY PAPER 3 4541/3 Tips to write a good report: PART 3 12 SPM 2007 Question no. 1 1(d) : Able to predict the three temperature readings correctly. Sample answer: 1. Sulphuric acid 37 o C 2. Nitric acid 32 o C 3. Ethanoic acid 28 31 o C CHEMI STRY PAPER 3 4541/3 Tips to write a good report: PART 3 13 SPM 2007 Question no. 1 1(e)(i) : Able to state three correct observations. Sample answer: 1. Final temperature is lower than the initial temperature. // The temperature decreases // Level of mercury decreases // thermometer reading decreases. 2. Bubbles are release // effervescence. 3. The volume of the solution is greater/ increases // level of solution increases/ higher. CHEMI STRY PAPER 3 4541/3 Tips to write a good report: PART 3 14 SPM 2007 Question no. 1 1(e)(ii) : Able to make an accurate inference based on the chemical equations. Sample answer: (Endothermic reaction)/heat/energy is absorbed) when hydrochloric acid/HCl with sodium hydrogen carbonate/NaHCO 3 to produce sodium chloride/NaCl, carbon dioxide/CO 2 and water. CHEMI STRY PAPER 3 4541/3 Tips to write a good report: PART 3 15 SPM 2007 Question no. 1 1(e)(iii) : Able to sketch the graph of the change of the volume of CO 2 gas against time by showing the following three information; 1. The axes are labeled correctly 2. Correct unit 3. Curve on the graph shows the increase of volume CHEMI STRY PAPER 3 4541/3 Tips to write a good report: PART 3 16 SPM 2007 Question no. 1 Sample answer: CHEMI STRY PAPER 3 4541/3 Tips to write a good report: Volume of CO 2 / cm 3 Time / minute PART 3 17 SPM 2007 Question no. 2 Identify the factor that influences the differences in the voltage. Plan a laboratory experiment to construct an electrochemical cell to determine one factor that influences the differences in the voltage. CHEMI STRY PAPER 3 4541/3 PART 3 Tips to write a good report: 1. Problem statement: Start with Does .. Does the position of the two metals in Electrochemistry Series affect the voltage? CHEMI STRY PAPER 3 4541/3 SPM 2007 Question no. 2 18 PART 3 Tips to write a good report: 2. Aim: Find Statement from the question To determine one factor that influences the differences in the voltage SPM 2007 Question no. 2 19 CHEMI STRY PAPER 3 4541/3 PART 3 3. Variables : Always given in the question. Manipulated variable : Pairs of metals Responding variables: Voltage Constant variable : Electrolyte /name CHEMI STRY PAPER 3 4541/3 Tips to write a good report: SPM 2007 Question no. 2 20 PART 3 4. Hypothesis : Manipulated + responding + direction The further the distance of the pair of metals in the Electrochemical Series, the voltage become greater. Tips to write a good report: SPM 2007 Question no. 2 21 CHEMI STRY PAPER 3 4541/3 PART 3 Tips to write a good report: SPM 2007 Question no. 2 5. Materials and apparatus : List all the materials and apparatus that involves, Aluminium, zinc, copper, beaker, voltmeter, wires, sand paper, the copper(II) sulphate solution (any suitable), 22 CHEMI STRY PAPER 3 4541/3 PART 3 Name at least three metals below than Ca in ECS If use any acid as electrolyte, the molarities is less than 1.0 mol dm -3 No need to state the volume and the concentration of the electrolyte. If you do make sure it suitable/accurate. If use K, Na, Ca : score1 If use concentrated/bench/molarity greater than 1.0 moldm -3 :score1 Tips: 23 CHEMI STRY PAPER 3 4541/3 PART 3 6. Procedures: use simple sentences, passive or active voice, use keywords, sequence Key word: pour, dip, connect, record, repeat, stir, heated, observe, measure, add, put into, 24 Tips to write a good report: SPM 2007 Question no. 2 CHEMI STRY PAPER 3 4541/3 PART 3 6. Procedures: use simple sentences, passive or active voice, use keywords, sequence 25 CHEMI STRY PAPER 3 4541/3 Not Suggested Answers: PART 3 Suggested Answers: 1. Pour the copper sulphate into a beaker. 2. Clean aluminium and copper with sand paper. 3. Dip aluminium and copper into the solution. 4. Connect it to the voltmeter // complete the circuit. 5. Record the voltmeter reading. 6. Repeat steps 1-5 / experiment by substituting aluminium with zinc / one metal for another. 26 CHEMI STRY PAPER 3 4541/3 PART 3 Tips to write a good report: SPM 2007 Question no. 2 Pairs of metal Voltage (V) Aluminium and copper Zinc and copper 7. Tabulation: heading for manipulated and responding variables, units, Manipulated Variable Responding Variable 27 CHEMI STRY PAPER 3 4541/3 HOME Max: Score 2 PART 3 Past SPM Question Scoring Scoring SPM Paper 3 2008 28 CHEMI STRY PAPER 3 4541/3 Question No. 1 Question No. 2 [Click button to see the question] PART 3 29 SPM 2008 Question no. 1 1(a) : Able to state the relationship correctly between the manipulated variable and the responding variable. Sample answer: Acid coagulated latex while alkali does not coagulate the latex. CHEMI STRY PAPER 3 4541/3 Tips to write a good report: PART 4 30 SPM 2008 Question no. 1 1(b) : Able to state the time taken in Set I and Set II accurately with correct unit. Sample answer: Set I : 5 minutes // 300 second // 0.03 hours Set II: 360 minutes // 21600 seconds // 6 hours Tips to write a good report: CHEMI STRY PAPER 3 4541/3 PART 4 31 SPM 2008 Question no. 1 1(c) : Able to construct a table to record the time taken for Set I and Set III of experiment that contains: 1. Correct titles 2. Readings and units Sample answer: Tips to write a good report: CHEMI STRY PAPER 3 4541/3 Set Time taken /minutes I 5 III 360 Or Set Time taken I 5 minutes III 6 hours PART 4 32 SPM 2008 Question no. 1 1(d): Able to state all correct observations, one from each set. Sample answer: Set I : 1. Latex coagulates 2. A solid lump is formed Set II: 1. Latex does not coagulate 2. No change 3. Liquid Set III: 1. Latex coagulates 2. Solid lump is formed Tips to write a good report: CHEMI STRY PAPER 3 4541/3 PART 4 33 SPM 2008 Question no. 1 1(e): Able to state the correct operational definition for coagulation of latex correctly. Sample answer: Latex becomes solid when acid is added // Latex becomes solid when exposed to air Tips to write a good report: CHEMI STRY PAPER 3 4541/3 PART 4 34 SPM 2008 Question no. 1 1(f): Able to state all three variables correctly Sample answer: Manipulated variable: Ethanoic acid / Acid , Ammonia solution / Alkali Responding Variable: Coagulate/Does not coagulate// Time taken for coagulation Constant Variable: Volume of latex/acid/(ammonia solution)/alkali//latex// temperature Tips to write a good report: CHEMI STRY PAPER 3 4541/3 PART 4 35 SPM 2008 Question no. 1 1(g)(i) : Able to state the observation correctly Sample answer: Latex coagulate // Latex becomes white // Latex is solidified Tips to write a good report: CHEMI STRY PAPER 3 4541/3 PART 4 36 SPM 2008 Question no. 1 1(g)(ii) : Able to give both explanations correctly Sample answer: 1. Ammonia is neutralized // OH- ions reacted with H+ ions 2. Acid / H+ ions neutralized (negative charged) / (protein membrane) Tips to write a good report: CHEMI STRY PAPER 3 4541/3 PART 4 37 SPM 2008 Question no. 1 1(h) : Able to explain the following aspects correctly 1. The presence of bacteria 2. Bacteria produce acid Sample answer: Bacteria produce acid / H+ ions. Tips to write a good report: CHEMI STRY PAPER 3 4541/3 PART 4 38 SPM 2008 Question no. 1 1(i)(i) :Able to compare correctly by referring to (time frame) / concentration of H+ ions Sample answer: The concentrations /number/amount/quantity of H+ ions in Set I is higher // [vice versa] Tips to write a good report: CHEMI STRY PAPER 3 4541/3 PART 4 39 SPM 2008 Question no. 1 1(i)(ii) :Able to classify all the four substances correctly Sample answer: Tips to write a good report: CHEMI STRY PAPER 3 4541/3 Can coagulate latex Cannot coagulate latex Nitric acid Methanoic acid Potassium hydroxide Sodium hydroxide Home Total marks: 33 PART 3 40 SPM 2008 Question no. 2 Statement 1 Lithium, Li, moves slowly at random on the surface of the water with a little fizzing. The water then turns red litmus paper to blue Statement 2 Sodium, Na, moves rapidly at random on the surface of the water with a hissing sound. The water then turns red litmus paper to blue. Statement 3 Potassium, K, moves very rapidly at random on the surface of the water. It ignites with a lilac flame with a pop and a hissing sound. The water then turns red litmus paper to blue. Plan a laboratory experiment to investigate the reactivity of lithium, sodium and potassium with water. PART 3 Tips to write a good report: a. Aim: Find from the question Sample answer: To investigate the reactivity of Group 1 elements/lithium, sodium and potassium with water CHEMI STRY PAPER 3 4541/3 SPM 2008 Question no. 2 41 Plan a laboratory experiment to investigate the reactivity of lithium, sodium and potassium with water. PART 3 b. Variables : Always given in the question. Tips to write a good report: SPM 2008 Question no. 2 Plan a laboratory experiment to investigate the reactivity of lithium, sodium and potassium with water. 42 Sample answer: Manipulated Variable: Elements of Group 1 Responding Variable : Reactivity Constant Variable : Temperature / size of alkali metal CHEMI STRY PAPER 3 4541/3 PART 3 Tips to write a good report: SPM 2008 Question no. 2 c. Hypothesis: Relationship between the manipulated variable and the responding variable with direction. Sample answer: (The lower/higher position of metal in) / (going down/up) Group 1, the more reactive is the metal in reaction with water. 43 CHEMI STRY PAPER 3 4541/3 PART 3 Tips to write a good report: SPM 2008 Question no. 2 d. List of substances and apparatus: Complete list of substances and apparatus. Sample answer: Substances: Lithium, sodium, potassium, water Apparatus : Water trough/basin/pale/tray/tank, knife, forceps, filter paper, 44 CHEMI STRY PAPER 3 4541/3 PART 3 Tips to write a good report: SPM 2008 Question no. 2 e. Procedure : List all the steps correctly Sample answer: 1. Fill the water trough with water 2. Cut piece of lithium using a knife and forceps 3. Dry the lithium using filter paper 4. Place the lithium on the surface of water 5. Record all the changes / observation 6. Repeat (step 1 to 5) / experiment using sodium and potassium 45 CHEMI STRY PAPER 3 4541/3 PART 3 Tips to write a good report: SPM 2008 Question no. 2 e. Procedure : List all the steps correctly Sample answer: 1. Fill the water trough with water 2. Cut piece of lithium using a knife and forceps 3. Dry the lithium using filter paper 4. Place the lithium on the surface of water 5. Record all the changes / observation 6. Repeat (step 1 to 5) / experiment using sodium and potassium 46 CHEMI STRY PAPER 3 4541/3 PART 3 Tips to write a good report: SPM 2008 Question no. 2 e. Tabulation of data: Tabulate the data with the following aspects 1. Correct titles 2. Complete list of elements Sample answer: 47 Element Observation/Reactivity Lithium Sodium Potassium Max: Score 2 Manipulated Variable Responding Variable HOME MASTERING PAPER 3 : THE SCORE Know to SCORE, sure to MASTER Paper 3 PART 3 Thank You END OF PART 3 49 KAMAL ARI FFI N BI N SAAI M SMK DATO BENTARA LUAR BATU PAHAT e- mel : kamal_ariffin2006@yahoo.com website: http://kemhawk.webs.com/ MASTERING PAPER 3 : THE SCORE PART 3