How Does Temperature Affect Viscosity & Density

2.
16
How Does Temperature Affect

Viscosity and Density?
Have you noticed that its easier to run after a
good warm-up? Fluids run more easily when
theyre warm, too. Viscosity, density, and
buoyancy all change with changes in
temperature.
First, lets discuss fluids other than water.
Have you heard the expression slower than
molasses in January? This describes the
increase in resistance to flow that fluids
experience when the temperature drops. As
heat is taken away from a fluid, its particles slow
down and come closer together. This causes the
fluid to contractits volume decreases. Thus
the fluids density will increase. (Remember,
D = M/V. Since M stays the same and V gets
smaller, then M/V will get bigger.) Viscosity will
also be affected. When the particles slow down
and come closer together, the forces of
attraction between them will increase and so
make it harder for them to flow past each other.
Thus, viscosity increases at lower temperatures.
As you would expect, the opposite occurs
when the temperature rises. When heat is
added to a fluid, its density and resistance to
flow decrease.
The reaction of air to temperature change
explains the behaviour of hot air balloons. As
air is heated and released inside the balloon,
the balloon rises. This happens because hot
air is less dense than the surrounding air, so it
rises to float above the cooler air. As the air
inside the balloon cools, it becomes denser,
and the balloon descends. Periodic bursts of
heat keep the balloon aloft.
Water: A Special Case

Water behaves differently from other fluids
when the temperature changes. You may have
noticed during a dive into a lake that the top
layer of water feels warmer than the lower
layers. During the summer, warmer water,
because it is less dense, floats on top of cooler
water. But as the temperature of water drops
below 4C, water becomes less dense again!
Table 1 illustrates this.
Table 1
Temperature of Pure Water
Density (g/cm3)
100C
0.958
20C (room temperature)
0.998
4C
1.000
0C
0.92
Ice floats because it is less dense than

liquid water. Water is most dense at 4C.
This unique property of water keeps lakes
from freezing solid in the winter. As the water
cools, it sinks to the bottom. The deepest part of
the lake will be at 4C: a liquid. This enables
aquatic life to survive. The ice on top of a lake
insulates the water beneath. (See Figure 1.) Only
shallow ponds freeze solid in the winter.
The viscosity of water also changes with
temperature. Water at 0C is approximately
seven times more viscous than water at 100C.
Figure 1
Water becomes lighter as it
freezes. At 4C, it is most
dense and falls below cooler,
frozen water.
Water at 0C
118
Unit 2
Water below 4C
Explaining the Effect of Temperature

Changes Using the Particle Theory
In a solid, particles are closely packed together and held in
a rigid structure by forces of attraction between them. The
particles can move, but only by vibrating in the same place.
When a solid is heated, the particles gain more energy and
vibrate faster. As more heat is added, this speed of vibration
becomes so fast that the force of
attraction cannot hold the particles
together. The rigid structure of the
solid falls apart, melting occurs, and
a liquid is formed. In a liquid, the
particles are slightly less tightly
packed together (less dense) than in
a solid.
Figure 2
As more heat is added to a liquid, the particles move

even faster. The forces of attraction between them are
broken, and the particles are able to move in all
directions, leaving larger spaces in between. The
particles take up more space or volume (Figure 2),
making the density lower. Particles eventually escape
from the liquid, and a gas is formed. (See Figure 3.)
The reverse process occurs when heat is taken away
from a gas or a liquid as its temperature decreases.
As the density of a fluid decreases with a rise in
temperature, so does the force of buoyancy that the fluid
exerts on an immersed object. Why is that? Because the
displaced fluid weighs less at a higher temperature. The
viscosity of the fluid also decreases as the attraction
between its molecules weakens.
Table 2
Volume
Temperature
Density
Figure 3
Firefighters often use water in the
form of a fine spray. This fine
spray absorbs heat from the fire
faster than a solid stream of water
would. As heat is absorbed, steam
is produced. Steam occupies a
larger volume and displaces the air
that is fuelling the fire.
1. Copy Table 2 and complete it

by adding up or down arrows to
indicate how each property changes
with temperature.
2. Use the words mass, volume, and
density to distinguish between
gases, liquids, and solids in terms
of the particle theory of matter.
3. Use the particle theory to explain
the effects of temperature
changes on the cooking oil in
Investigation 2.4.
4. How does water behave
differently than other fluids when
the temperature changes?
Making Connections
As the temperature of a liquid increases,

the spaces between its particles become
greater, and the volume of the liquid
increases. When placed in a glass tube,
alcohol increases or decreases in volume
as the temperature fluctuates. Thats how
thermometers work.
Temperature
Understanding Concepts
Viscosity
Buoyancy
5. In many aircraft, oxygen masks

are stored in compartments above
the passengers. The oxygen for
these masks is stored as a liquid.
When it is needed, it is warmed
up until it is a gas. Explain why
oxygen is stored as a liquid rather
than a gas in this situation.
6. Will ships float lower or higher in
tropical waters? Explain your
answer using the words buoyancy
and density.
7. Suggest two examples of a
substance changing its
temperature in the natural world.
What happens to its viscosity and
density in each case?
Exploring
8. Lava, brought to the surface when
a volcano erupts, changes in
viscosity as it cools. Research
how lava is produced. Explain the
viscosity changes it undergoes.
How will temperature

changes affect the fluid in
your Challenge?
Fluids
119

How Does Temperature Affect Viscosity & Density

Uploaded by

Copyright:

Available Formats

How Does Temperature Affect Viscosity & Density

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

How Does Temperature Affect Viscosity & Density

Uploaded by

Copyright:

Available Formats

2.

How Does Temperature Affect

Water: A Special Case

Temperature of Pure Water

20C (room temperature)

Ice floats because it is less dense than

Explaining the Effect of Temperature

As more heat is added to a liquid, the particles move

1. Copy Table 2 and complete it

As the temperature of a liquid increases,

5. In many aircraft, oxygen masks

How will temperature

You might also like