Meitrack t322 User Guide v1.3

File Name:
Project:
MEITRACK T322
User Guide
T322
Sub Project:
Revision:
User Guide
V1.3
Creator:
Creation Date:
Update Date:
Page:
Confidential:
Meitrack
2013-07-01
2014-01-03
1 of 29
External Documentation
MEITRACK GPS Vehicle Tracker
T322
User Guide
Copyright 2013 Meitrack Group All rights reserved.
File Name:
1.
2.
3.
4.
5.
6.
7.
Project:
MEITRACK T322
User Guide
T322
Sub Project:
Revision:
User Guide
V1.3
Creator:
Creation Date:
Update Date:
Page:
Confidential:
Meitrack
2013-07-01
2014-01-03
2 of 29
Content
Copyright and Disclaimer .............................................................................. 3
Applications .................................................................................................. 3
Product Function and Specifications ............................................................ 3
3.1 Product Function .................................................................................... 3
3.2 Smart Voice Setting ................................................................................ 4
3.3 Smart Sleep Functions ............................................................................ 4
3.4 Data Compression Mode CCC .............................................................. 5
3.5 Specifications .......................................................................................... 5
T322 and Accessories.................................................................................... 7
View .............................................................................................................. 8
First Use ........................................................................................................ 9
6.1 Install the SIM Card and the TF Card ...................................................... 9
6.2 LED Indicators ....................................................................................... 10
6.3 Configure by Computer ........................................................................ 12
6.4 GPS Tracking.......................................................................................... 17
6.5 Advanced Settings................................................................................. 21
6.6 GPS Tracking System ............................................................................. 23
Installation .................................................................................................. 24
7.1 Connect GPS Antenna (Optional) .......................................................... 24
7.2 Install I/O Cable .................................................................................... 25
7.3 Mount the T322 Unit ............................................................................ 29
File Name:
Project:
MEITRACK T322
User Guide
T322
Sub Project:
Revision:
User Guide
V1.3
Creator:
Creation Date:
Update Date:
Page:
Confidential:
Meitrack
2013-07-01
2014-01-03
3 of 29
1. Copyright and Disclaimer

Copyright 2013 MEITRACK. All rights reserve
are trademarks that belong to Meitrack Group. The user manual may
MEITRACK and
be changed without prior notification.
This user manual, or any part thereof, may not be reproduced for any purpose
whatsoever without the written authorization of MEITRACK, or transmitted in any form,
either electronically or mechanically, including photocopying and recording.
In no event shall MEITRACK be liable for direct, indirect, special, incidental, or
consequential damages (including but not limited to economic loss, personal injury, and
loss of asset and property) arising out of the use or inability or illegality to use the
product or documentation.
2. Applications
Private Car Tracking and Security
Official Car Tracking and Security
Personal Tracking
3. Product Function and Specifications

3.1 Product Function
U-blox 7 GPS and Quad Band GSM 850/900/1800/1900Mhz
GPS + GSM Dual Module Tracking
SMS/TCP/UDP (Meitrack protocols, use only the CCC data compression mode
for uploading.)
Track by Time/ Distance Interval
Track on Mobile Phone
Listen-in or Two-way Audio (Optional)
Internal 1M buffer chip (can store10000 GPRS buffer records and 512 buffer SMSs)
Inbuilt Motion Sensor
Internal Backup Battery 350mAh
Long Stand-by Time
File Name:
Project:
MEITRACK T322
User Guide
T322
Sub Project:
Revision:
User Guide
V1.3
Creator:
Creation Date:
Update Date:
Page:
Confidential:
Meitrack
2013-07-01
2014-01-03
4 of 29
SOS Alarm
Geo-fence Alarm
GPS Blind Area Alarm
Low Battery Alarm
Speeding Alarm
Tow Alarm
GPS Antenna/ External Power Cut Alarm
Mileage Report
Engine Cut (Engine immobilization) Alarm
3 Digital Input(1 Negative,1 Positive and 1 can be set through software),2 Output
1 Analog Input for Fuel Detection (Optional)
1 Output for Buzzer Alarm (Optional)
Wireless Remote Control (Arming, Disarming) (Optional)
Address Reply(Optional)
3.2 Smart Voice Setting

(Caution: Before using this function, you need to ensure the following: 1. Your phone
number is set to be an authorized number on the T322. 2. The SIM card on the T322 has
subscribed the caller identification service. Otherwise, the smart voice setting function
cannot be used.)
Smart voice can be set by using an authorized mobile phone number to dial the SIM
card number on the T322. After the dial, "BI-BI" is heard and then the following
notification tone is played automatically: "Hello! Arming press1, Disarming press 2,
Query Arming press 3, Query Position press 4, voice monitoring press 5. Thank you."
Then, press the corresponding number to enable the function you want.
For details about the arming and disarming function, see section 6.4.3 "Arming and
Disarming".
3.3 Smart Sleep Functions

This function works differently depending on the engine.
File Name:
Project:
MEITRACK T322
User Guide
T322
Sub Project:
Revision:
User Guide
V1.3
Creator:
Creation Date:
Update Date:
Page:
Confidential:
Meitrack
2013-07-01
2014-01-03
5 of 29
Scenario 1: The engine is not connected during detection.

After the device is not working for 15 minutes, it automatically enters the power-saving
sleep mode. At this time, the GPRS module does not work, and the device does not
upload tracking data at regular intervals. Instead, the device sends heartbeat data
packets about the positioning cease (the GPS does not take effect) to the platform at
intervals of 10 minutes by default (the intervals of sending heartbeat packets can be
changed). If the device vibrates or is triggered externally, it is waken up, continues to
work normally, uploads timing data at the timing track intervals, and uploads heartbeat
packets regularly.
Scenario 2: The engine is connected during detection.
If the engine is on (ACC ON), the device works normally, and uploads timing track data
and heartbeat packets regularly.
If the engine is off (ACC OFF) and no vibration occurs, the device immediately
automatically enters the power-saving sleep mode. The device sends heartbeat data
packets about the positioning cease to the platform at intervals of 10 minutes by default
(the intervals of sending heartbeat packets can be changed) as in scenario 1. If the
device vibrates or starts its engine, it is waken up, continues to work normally, and
uploads timing data.
Note:
1. The device keeps working normally if it is charged over a USB cable, and will not
enter the power-saving sleep mode.
2. The device consumes low power in the smart sleep mode and can last for 50
hours without external power supply.
3.4 Data Compression Mode CCC
The device communicates over Meitrack protocols. The header and the tail of the data
packet are in the same format as those of the data packet using Meitrack
communication protocols. The middle part of the data packet is uploaded in the CCCdata compression mode. For details about the CCC data, see T322 data analysis manual.
Note:
Only proactively-uploaded data (such as timing, heartbeat or alarm events) is uploaded
in CCC format. Other data such as instructions issued by the platform and replies from
the device use the same format as related instructions in Meitrack protocol
communication manual.
3.5 Specifications
File Name:
Items
Dimension
Weight
Input Voltage
Back-up Battery
Normal Working
Power Consumption
(12V)
Standby Power
Consumption (12V)
Battery Normal
Working
Power Consumption
Battery Standby
Power
Consumption
Operating
Temperature
Humidity
Work Time
LED
Button
Project:
MEITRACK T322
User Guide
T322
Sub Project:
Revision:
User Guide
V1.3
Creator:
Creation Date:
Update Date:
Page:
Confidential:
Meitrack
2013-07-01
2014-01-03
6 of 29
Specifications
70.5*54*19.5mm
65g
DC 11V~36V/1.5A
350mAh/3.7V
45mA normal working current (12V ACC ON, 10 sec interval for data
transmission, average current)
6.5mA (12V ACC OFF, no data transmission, average current)
90mA (3.8V, GPS module OFF, 10 sec interval for data transmission,
average current)
7mA (3.8V, GPS module OFF, no data transmission, average current)
-20~80
5%~95%
50 hours in power-saving mode and 3.5 hours in normal working mode
3 LED lights to show GPS/GSM/Power status
1 SOS (send SMS or Call), 1 power button, 1 positive or negative trigger
switch by the door
Microphone/Speaker External (Optional)
TF card
(Optional) 2GB embedded map card
Memory
1M Byte
Sensor
Motion sensor
GSM Frequency
GSM 850/900/1800/1900MHz
GPS Chip
Latest GPS U-blox 7 chipset, 50 channels all-in-view tracking
GPS Sensitivity
-161dB
Positioning Accuracy 10 meters
GSM Antenna
Internal Antenna
GPS Antenna
Internal / external MMCX antenna (Optional)
File Name:
Items
I/O
Project:
MEITRACK T322
User Guide
T322
Sub Project:
Revision:
User Guide
V1.3
Creator:
Creation Date:
Update Date:
Page:
Confidential:
Meitrack
2013-07-01
2014-01-03
7 of 29
Specifications
3 Digital Input(1 SOS, 1 door trigger input (can be set to be negative or
positive), 1 ACC detection)
2 Output(1 for buzzer alarm,1 for remote fuel cut-off)
1 Analog detection input
1 RS232 port (can be used for battery charge)
1Wireless Remote Control (433Mhz)(Optional)
4. T322 and Accessories
T322 with Battery
I/O Cable
SOS Button
USB Data Cable
CD
Optional Accessories:
Wireless Remote
Control
Buzzer Alarm
Microphone
Speaker
File Name:
Project:
MEITRACK T322
User Guide
T322
Sub Project:
Revision:
User Guide
V1.3
Fuel Level Sensor
GPS Antenna
Creator:
Meitrack
Creation Date:
Update Date:
Page:
Confidential:
2013-07-01
2014-01-03
8 of 29
Audio Cable for

Microphone and
Speaker
Remote Control
Box
Map Card
5. View
GPS Antenna
Interface
Power/GSM/GPS
Indicators
USB Port
File Name:
Project:
MEITRACK T322
User Guide
T322
Sub Project:
Revision:
User Guide
V1.3
Microphone & Speaker Interface
Creator:
Creation Date:
Update Date:
Page:
Confidential:
Meitrack
2013-07-01
2014-01-03
9 of 29
Power & Functional Cable Interfaces
SIM Card Slot

Input 3 High or Low-Level Trigger
Detection Switch. If it points to the SIM
slot, the high-level (+) trigger is selected.
Power switch
6. First Use
6.1 Install the SIM Card and the TF Card
File Name:
Project:
MEITRACK T322
User Guide
T322
Sub Project:
Revision:
User Guide
V1.3
Creator:
Creation Date:
Update Date:
Page:
Confidential:
Meitrack
2013-07-01
2014-01-03
10 of 29
SIM card
SIM card:
Remove cover of SIM, insert the SIM card by sliding it into the card holder with the chip
module facing to the connectors on PCB, and put the cover in place.
Note:
Make sure SIM card has sufficient balance.
If the device is required to reply SMS to authorized number after being called,
please make sure it has the function of displaying incoming Caller ID.
Before installing the SIM card, turn the power off. Make sure the SIM card is
unlocked.
TF card:
1. Loosen the four screws on the rear cover and open it.
2. Open the cover on the TF card and insert the TF card into the TF car slot and lock it
tightly.
6.2 LED Indicators
10
File Name:
Project:
MEITRACK T322
User Guide
T322
Sub Project:
Revision:
User Guide
V1.3
GSM LED (Green)
Power (Red)
Creator:
Creation Date:
Update Date:
Page:
Confidential:
Meitrack
2013-07-01
2014-01-03
11 of 29
GPS LED (Blue)
There are three ways to turn on the tracker T322:

Press and hold down the power button for 3-5 seconds.
Connect the tracker to a computer through a USB cable.
Connect the tracker to external power.
Note: If the tracker is charged through a USB cable or is connected to external power, it
keeps on and even after it is turned off by key it turns on automatically.
GPS LED (Blue)
On
Off
Quick Flashing (0.5 second on and 2.5
seconds off)
Slow Flashing (1 second on and 2
seconds off)
GSM LED (Green)
On
Off
seconds off)
seconds off)
Power (Red)
GPS Antenna malfunctions

GPS is off.
T322 has a GPS fix
T322 has no GPS fix
A call is coming in / a call is being made

SIM card is not inserted / SIM card
malfunctions
T322 is connected to GSM network
T322 is not connected to GSM network
11
File Name:
Project:
MEITRACK T322
User Guide
T322
Sub Project:
Revision:
User Guide
V1.3
On
seconds off)
seconds off)
Creator:
Creation Date:
Update Date:
Page:
Confidential:
Meitrack
2013-07-01
2014-01-03
12 of 29
Charging
Low battery
Normal working
6.3 Configure by Computer
The following shows you how to configure the T322 with MEITRACK Manager. For details
on configurations and functions, please refer to the MEITRACK Manager User Guide.
Steps:
1. Install USB Driver and MEITRACK Manager.
2. Connect the T322 to a PC with a USB cable.
3. Run MEITRACK Manager, turn on the T322 and connect it to the PC with a USB
cable, Meitrack Manager will automatically detect the port number and read all
parameters of the T322:
12
File Name:
Project:
MEITRACK T322
User Guide
T322
Sub Project:
Revision:
User Guide
V1.3
Creator:
Creation Date:
Update Date:
Page:
Confidential:
Meitrack
2013-07-01
2014-01-03
13 of 29
Note: Please follow the steps to configure the port if MM cant automatically detect the
port.
4. Run Device Manager (right-click My Computer Manage Computer
Management- Device Manager ) Click Port(COM and LPT), and find Prolific
USB-to-Serial Comm Port as follows:
Note: Remember the COM number. Input the same port when configuring Meitrack
Manager. It is COM3 in this example and may be COM4 or COM5 or the like in your
13
File Name:
Project:
MEITRACK T322
User Guide
T322
Sub Project:
Revision:
User Guide
V1.3
Creator:
Creation Date:
Update Date:
Page:
Confidential:
Meitrack
2013-07-01
2014-01-03
14 of 29
computer.
5. Click Select Device Connection and click Save, as shown below:
6.3.1 GPRS/SMS Tracking

Select Column 2: Tracking
14
File Name:
GPRS Tracking
Item
GPRS
IP/Domain and
Port
Project:
MEITRACK T322
User Guide
T322
Sub Project:
Revision:
User Guide
V1.3
Creator:
Creation Date:
Update Date:
Page:
Confidential:
Meitrack
2013-07-01
2014-01-03
15 of 29
Description
Close: Close GPRS
TCP: TCP is a stable connection. It is
recommended (Default). UDP: UDP can save
data flow, while it is unstable.
Set main servers IP and
port. Default IP:
67.203.13.26
APN, APN
Username,
APN Password
GPRS Time
Interval
Default Port : 8800

Max 32 bytes. If no username and password, leave them blank.
Track by time interval via GPRS

Set time interval for GPRS tracking, in unit of 10 seconds (fill in
6 means 60 seconds). To cancel GPRS tracking, time interval =
0; max time interval = 65535*10 seconds.
Default setting of GPRS interval time is 6*10s.
15
File Name:
Project:
MEITRACK T322
User Guide
T322
Sub Project:
Revision:
User Guide
V1.3
Creator:
Creation Date:
Update Date:
Page:
Confidential:
Meitrack
2013-07-01
2014-01-03
16 of 29
Item
GPRS Time Zone
Description
GPRS time zone minute = 0, GMT 0 (Default)
Save
GPRS time zone minute = [-32768,32767], set different time zones.

Write current GPRS Tracking settings into the tracker.
For more details, please refer to Meitrack Manager User Guide.

6.3.2 Geo-fence Configuration
Select Column 3: Geo Fence
Geo-fence: it is a circular fence which is based on a center point with preset radius.
Maximum 8 geo-fences.
Enter Geo-fence: alarm while the device entering geo-fence, the left textbox will
show corresponding SMS Header, default as In Alarm.
Exit Geo-fence: alarm while the device exiting geo-fence, the left textbox will show
corresponding SMS Header, default as Out Alarm.
Map: click In Map to make and define geo-fence.
16
File Name:
Project:
MEITRACK T322
User Guide
T322
Sub Project:
Revision:
User Guide
V1.3
Creator:
Creation Date:
Update Date:
Page:
Confidential:
Meitrack
2013-07-01
2014-01-03
17 of 29
6.3.3 Authorized Event Configuration

Select Column 3: Authorize.
Set GPRS Event and Buzzer Alarm. (They can be set separately.)
For more GPRS Settings, please refer to MEITRACK SMS Protocol and MEITRACK GPRS
Protocol.
6.4 GPS Tracking

6.4.1 Real-time Tracking by Mobile Phone
Perform the following steps:
1. Use a mobile phone, into which the authorized number is inserted, to make a call
to the SIM card on the T322. The call enters the smart voice mode automatically.
2. Press 4 on the mobile phone according to the prompt "Query Position press 4". A
positioning SMS will be sent to your mobile phone to notify a link to the specific
address of the T322.
3. Click the link and you may see the location of the T322 on the map.
17
File Name:
Project:
MEITRACK T322
User Guide
T322
Sub Project:
Revision:
User Guide
V1.3
Creator:
Creation Date:
Update Date:
Page:
Confidential:
Meitrack
2013-07-01
2014-01-03
18 of 29
Example SMS:
Now,110727
02:48,V,16,23Km/h,61%,http://maps.google.com/maps?f=q&hl=en&q=22.540103,114.08232
9&ie=UTF8&z=16&iwloc=addr&om=1
Description on the SMS content
Content
Description
Now
Current Location
110721 16:40
Date & Time: 21 July, 2011,
16:40pm
V
No GPS fixed
10
0Km/h
97%
GSM signal=10
Speed=0
Battery Power: 97%
Note
Alarm Type
Date & Time in YYMMDD HH:MM
GPS Status Indicator:
A = valid, V = invalid
GSM Signal. Decimal Digit (0~31)
km/h. Decimal digit
Battery Power Balance
(Percentage)
18
File Name:
Project:
MEITRACK T322
User Guide
T322
Sub Project:
Revision:
User Guide
V1.3
http://maps.goog Latitude: 22.513015

Longitude: 114.057235
le.c
om/maps?f=q&hl
=en&q=22.54010
Creator:
Creation Date:
Update Date:
Page:
Confidential:
Meitrack
2013-07-01
2014-01-03
19 of 29
Google Maps Web Link with

Latitude and Longitude. Click on
the link to get the location.
3,114.082329
&ie=UTF8&z=16&i
wloc=addr&om=
1
If your mobile cannot visit HTTP websites, input the latitude and longitude into Google
Maps maps.google.com as the following picture, to show to the position:
More SMS Commands

You can configure T322 by mobile phone.
Note:
The default password is 0000, it can be modified through SMS command (Refer to below
text) or Meitrack Manager on computer (Refer to 6.3 Configure by Computer).
T322 can be configured by any mobile SMS command with a correct password. After an
authorization phone number is set, only the authorized number can receive an SMS
report about a preset alarm event.
6.4.2 Set Authorized phone Numbers
Command: 0000, A71,authorized phone number 1,authorized phone number
2,authorized phone number 3
19
File Name:
Project:
MEITRACK T322
User Guide
T322
Sub Project:
Revision:
User Guide
V1.3
Creator:
Creation Date:
Update Date:
Page:
Confidential:
Meitrack
2013-07-01
2014-01-03
20 of 29
SMS Get: IMEI, A71, OK

Note:
Authorized phone Number: Max 16 characters. It is blank by default.
First Authorized phone Number: Authorize for receiving call and SMS notification
from SOS Alarm, Calling for Real-time Location, Geo-fence Alarm, Low Battery Alarm,
Opening the Vehicles Door or Starting engine without permission.
0000, A71 to delete all Authorized phone Numbers.
When SOS button is pressed, T322 will make a call to the authorized phone number
1, 2 and 3 sequentially. It will stop calling once a number answers. If the call is not
answered after the third number is dialed, the dialing ends.
Example: 0000,A71,13811111111,13822222222,13833333333
SMS Get: 353358017784062,A71,OK
6.4.3 Anti-Theft Status Setting -- Arming/Disarming
There are four ways to set Arming: Wireless Remote control (Optional), SMS Command,
Phone Call, or Platform Command.
Suggestion: Using optional accessories Wireless Remote Control and Buzzer Alarm to
strengthen protection, and set the Authorized phone Number to make sure it can
receive the call and SMS Report while stolen.
Wireless Remote Control: Press the Lock key to Arm. If buzzer alarm is connected,
it will BI once to confirm the Arming is successful. If buzzer is not connected,
open the vehicles door to see whether a SMS alert and a call is sent to the preset
authorized phone number. Press Unlock to Disarm.
SMS Command: To Arm and Disarm by SMS Command.
Command: 0000, B21, Status
SMS Get: IMEI, B21, OK
Note:
Status=1 Arming. In Arming status, if open vehicle door or start ACC on, T322
will make call and send SMS report to the authorized phone number.
Status=0 Disarming. In Disarming status, all security alarms will be OFF.
20
File Name:
Function
Call
Project:
MEITRACK T322
User Guide
T322
Sub Project:
Revision:
User Guide
V1.3
SMS Engine
Cut
Creator:
Creation Date:
Update Date:
Page:
Confidential:
Meitrack
2013-07-01
2014-01-03
21 of 29
Buzzer Note
While open the vehicles door
Open the
Vehicles
without permission, the buzzer will

keep sounding until disarm, then
Door
T322 will make call in turns and send

SMS report to the authorized phone
numbers.
While start the vehicle, the engine will
Start the
vehicle
be cut to avoid stolen, buzzer will keep

sounding until disarm, then T322 will
make call in turns and send SMS report
to the authorized phone numbers.
After the vehicle is stolen, it can be
Set Arming
while
Driving
arming while driving, when the vehicle

speed is lower than 5km/h, the engine
(Intercept
will be cut. Then T322 will send an SMS
the Driving
alert to authorized phone numbers.
Vehicle )
Tow Alarm
stopped with GPRS/SMS command. Set
On ACC off status, the tow alarm will be

trigger if the vehicle keeps vibrating.
Then T322 will make call in turns and
send SMS report to the authorized
phone numbers.
Please refer to the MEITRACK SMS Protocol for more detailed SMS commands.
6.5 Advanced Settings

6.5.1 Definition of Keys on RF Remote Control
21
File Name:
Project:
MEITRACK T322
User Guide
T322
Sub Project:
Revision:
User Guide
V1.3
Creator:
Creation Date:
Update Date:
Page:
Confidential:
Meitrack
2013-07-01
2014-01-03
22 of 29
Key-1: Short press to enter the arming status and the buzzer will BI once.
Key-2: Short press to exit the arming status and the buzzer will BI twice.
Note: For more details on the arming Status, please refer to 6.4.3 Anti-Theft Status Setting
--Arming/Disarming.
6.5.2 Remote Control Code Matching
Generally, a remote control can be used normally without code matching, because code
matching is done when the remote control is delivered with the tracker.
Under special scenarios, for example, the original remote control is lost and is replaced
with a new one, code matching needs to be performed on the new remote control. (A
tracker supports a maximum of two remote controls.)
To match code, perform the following steps:
1. Connect the cable on the remote control box to the cable on the T322.
2. Open the cover of the remote control box and connect the short cable inside to
the ground cable of the T322 for more than two seconds.
3. Press any key on the first remote control once, and then press any key on the
second remote control once. At this time, disconnect the short cable and the
ground cable.
4. Press the unlock keys on the two remote controls until the buzzer rings, which
indicates that the code is matched.
Note: If the code matching is performed on only one remote control, the other remote
control is unusable.
22
File Name:
Project:
MEITRACK T322
User Guide
T322
Sub Project:
Revision:
User Guide
V1.3
Creator:
Creation Date:
Update Date:
Page:
Confidential:
Meitrack
2013-07-01
2014-01-03
23 of 29
6.6 GPS Tracking System

Steps:
1. Configure Parameters -Log in Meitrack Family GPS Tracking System MS02 ((visit
www.trackingmate.com and select MS02, or directly visit ms02.trackingmate.com)
- Add Devices.
There are 2 methods to configure:
Configure by SMS: Send SMS command

(0000,A21,1,67.203.13.26,8800,APN,APN username,APN password) and
(0000,A12,6,0) to the SIM card on the T322.
Configure by Meitrack Manager: connect the T322 to a PC, run Meitrack

Manager.exe, enter the main interface and select column 2 Tracking, turn on
TCP and set IP, Port, APN, GPRS Time Interval.
2. Visit and log in to ms02.meiligao.com (Please contact us if lose your account and
password).
3. Enter the map and click Manage Admin.
4. Select Users and Add a New Device.
23
File Name:
Project:
MEITRACK T322
User Guide
T322
Sub Project:
Revision:
User Guide
V1.3
Creator:
Creation Date:
Update Date:
Page:
Confidential:
Meitrack
2013-07-01
2014-01-03
24 of 29
5. Get IMEI from serial port and register via IMEI (The IMEI is 356896031494173 for
example).
6. Double-click the Control Panel on the right of the main interface to check if the
data on the bottom is updated.
7. Installation
7.1 Connect GPS Antenna (Optional)
GPS Antenna
Interface
GPS Antenna
24
File Name:
Project:
MEITRACK T322
User Guide
T322
Sub Project:
Revision:
User Guide
V1.3
Creator:
Meitrack
Creation Date:
Update Date:
Page:
Confidential:
2013-07-01
2014-01-03
25 of 29
If the tracker is installed inside the vehicle, with weak GPS signal, it can connect optional
external GPS antenna to strengthen the signal.
The optimum location for the GPS antenna is on the roof of vehicle. The cover and GPS
antenna are directional. Make sure they are facing up and lying as flat as possible. Fix
them in place with glue or zip ties.
Note: Do not shield or cover the GPS antenna with any objects containing metal.
7.2 Install I/O Cable

7.2.1 Definition of I/O Cable
The I/O cable includes power cable, analog input, negative/positive input and output.
SOS
GND
SOS
(Black)
2
Device
Input
Power
(Red)
(White)
4
Device
GND
(Black)
5
Output
1
(Yellow)
7
Output 2
(Orange)
9
Input 2
(Brown)
11
Input
3
(Grey)
6
Remote
Control
GND
(Black)
10
Remote
Control
signal wire
(Green)
12
Remote
Control Power
(Yellow)
Analog
Input
(Blue)
No.
1
2
I/O
Description
SOS GND
GND, used for input1 triggering.
Device Input Power DC 11V~36V, has under voltage and over voltage
protection
Input 1 (SOS)
Device GND
Negative trigger: Alarm when input 1 active (or

press SOS)
GND, connect to negative electrode of the car
battery
25
File Name:
No.
5
6
7
8
9
10
11
Project:
MEITRACK T322
User Guide
T322
Sub Project:
Revision:
User Guide
V1.3
Creator:
Creation Date:
Update Date:
Page:
Confidential:
Meitrack
2013-07-01
2014-01-03
26 of 29
I/O
Description
Output 1 (Fuel Cut) Output OD, power 1W, 0~100V
Connect with relay for engine/fuel cut (default)
Remote Control
Connect with the black wire of remote control
GND
box
Output 2 (Buzzer
Connect with the negative electrode of the
Alarm)
buzzer alarm
Remote Control
4.2V, Connect with the Red wire of remote
Power
control box
Input 2 (ACC Input) Positive trigger: High level voltage input(3~60V),
default as ACC
Remote Control
signal
wire (Input 4)
Input 3 (Door
Trigger)
detection
Connected to the blue cable of the remote
control box
High-level trigger or low-level trigger can be
selected (Low-level trigger, that is, negative
trigger, is selected by default).
It is controlled by a switch (beside the SIM card
slot.
12
Analog Input
It is used for door detection.

0~47V AD detection.
Connected to sensors with various voltage
output.
Formulas for calculating AD analog:
AD1/100 (External analog detection value)
AD4/100 (AD4 is the detected voltage of the
internal battery by default.)
AD5/100 (AD5 is the detected voltage of the
external power by default.)
7.2.2 I/O Photos
26
File Name:
Project:
MEITRACK T322
User Guide
T322
Sub Project:
Revision:
User Guide
V1.3
Digital Input 1(SOS) Interface
Creator:
Creation Date:
Update Date:
Page:
Confidential:
Meitrack
2013-07-01
2014-01-03
27 of 29
Remote Control Interface
7.2.3 Power Cable/Ground Wire

Connect GND (-Black) and Power (+Red) wires to the vehicle battery.
7.2.4 ACC and Door Detection
7.2.5 Remote Control Stop Engine
27
File Name:
Project:
MEITRACK T322
User Guide
T322
Sub Project:
Revision:
User Guide
V1.3
Creator:
Creation Date:
Update Date:
Page:
Confidential:
Meitrack
2013-07-01
2014-01-03
28 of 29
7.2.6 Buzzer Alarm (Optional)
Buzzer Output
7.2.7 Remote Control Box (Optional)
28
File Name:
Project:
MEITRACK T322
User Guide
T322
Sub Project:
Revision:
User Guide
V1.3
Creator:
Creation Date:
Update Date:
Page:
Confidential:
Meitrack
2013-07-01
2014-01-03
29 of 29
7.2.8 Port of Microphone and Speaker (Optional)
7.3 Mount the T322 Unit

T322 can be fixed with nylon cables and install inside the vehicle; or insert to cigar
lighter (5V input) of the vehicle for convenient use.
Please do not hesitate to email us at info@meitrack.com if you have any questions.
29

Meitrack t322 User Guide v1.3

Uploaded by

Copyright:

Available Formats

Meitrack t322 User Guide v1.3

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Meitrack t322 User Guide v1.3

Uploaded by

Copyright:

Available Formats

File Name:

MEITRACK GPS Vehicle Tracker

Copyright 2013 Meitrack Group All rights reserved.

Copyright 2013 Meitrack Group All rights reserved.

1. Copyright and Disclaimer

3. Product Function and Specifications

Copyright 2013 Meitrack Group All rights reserved.

3.2 Smart Voice Setting

3.3 Smart Sleep Functions

Copyright 2013 Meitrack Group All rights reserved.

Scenario 1: The engine is not connected during detection.

3.4 Data Compression Mode CCC

Copyright 2013 Meitrack Group All rights reserved.

Copyright 2013 Meitrack Group All rights reserved.

4. T322 and Accessories

T322 with Battery

USB Data Cable

Copyright 2013 Meitrack Group All rights reserved.

Fuel Level Sensor

Audio Cable for

Copyright 2013 Meitrack Group All rights reserved.

Microphone & Speaker Interface

Power & Functional Cable Interfaces

SIM Card Slot

Copyright 2013 Meitrack Group All rights reserved.

Make sure SIM card has sufficient balance.

6.2 LED Indicators

Copyright 2013 Meitrack Group All rights reserved.

GSM LED (Green)

GPS LED (Blue)

There are three ways to turn on the tracker T322:

Connect the tracker to a computer through a USB cable.

Connect the tracker to external power.

GPS Antenna malfunctions

A call is coming in / a call is being made

6.3 Configure by Computer

Copyright 2013 Meitrack Group All rights reserved.

Copyright 2013 Meitrack Group All rights reserved.

6.3.1 GPRS/SMS Tracking

Copyright 2013 Meitrack Group All rights reserved.

Default Port : 8800

Track by time interval via GPRS

Copyright 2013 Meitrack Group All rights reserved.

GPRS time zone minute = [-32768,32767], set different time zones.

For more details, please refer to Meitrack Manager User Guide.

Copyright 2013 Meitrack Group All rights reserved.

6.3.3 Authorized Event Configuration

6.4 GPS Tracking

Copyright 2013 Meitrack Group All rights reserved.

Copyright 2013 Meitrack Group All rights reserved.

http://maps.goog Latitude: 22.513015

Google Maps Web Link with

More SMS Commands

Copyright 2013 Meitrack Group All rights reserved.

SMS Get: IMEI, A71, OK

Status=0 Disarming. In Disarming status, all security alarms will be OFF.

Copyright 2013 Meitrack Group All rights reserved.

without permission, the buzzer will

T322 will make call in turns and send

be cut to avoid stolen, buzzer will keep