Marine Propulsion Systems: Description

Marine Propulsion Systems
ZF 220 A
10 Down angle, direct mount marine
transmission.
Maximum rated input: 298kW (399hp)
Available for Pleasure, Light, Medium and
Continuous Duty applications.
Description

Reverse reduction marine transmission with hydraulically actuated multi-disc clutches .

Suitable for high performance applications in luxury motoryachts, sport fishers, express cruisers etc .
Robust design also withstands continuous duty in workboat applications .
Fully works tested, reliable and simple to install .
Design, manufacture and quality control standards comply with ISO 9001 .
Compatible with all types of engines and propulsion systems, including waterjets and surface- piercing
propellers, as applicable .
Features

Lightweight and robust aluminum alloy casing (sea water resistant) .

Case hardened and precisely ground gear teeth for long life and smooth running .
Output shaft thrust bearing designed to take maximum propeller thrust astern and ahead .
Smooth and reliable hydraulic shifting with control lever for attachment of push-pull cable .
Suitable for twin engine installations (same ratio and torque capacity in ahead or astern mode) .
Replaceable oil filter cartridge .
Compact, space saving design; 10 down-angle and "Lambda" beveloid gear principle .
Options

Engine-matched dual stage coupling .

SAE 2, SAE 3 and B.W. adapters .
Oil cooler complete with fittings and flexible oil hoses .
Mounting brackets .
Propeller shaft flange and coupling bolt sets .
Classification by all major Classification Societies on request .
Trolling valve for slow-speed drive .
07:52 PM GMT - 15-Mar-05
ZF 220 A
Ratings
Pleasure Duty
RATIOS
'A' Pos
'B' Pos
1.235
1.533
1.750*
2.040
2.455
1.235
1.533
1.750
2.040
2.455
MAX. TORQUE
Nm
ftlb
890
890
890
890
817
656
656
656
656
603
POWER/RPM
kW
hp
0.0932
0.0932
0.0932
0.0932
0.0855
0.1250
0.1250
0.1250
0.1250
0.1147
SAMPLE POWER CAPACITIES

kW hp kW hp kW hp
2300 rpm 2800 rpm 3200 rpm
214 287 261 350 298 400
214 287 261 350 298 400
214 287 261 350 298 400
214 287 261 350 298 400
197 264 240 321 274 367
MAX.
RPM

kW hp kW hp kW hp
2100 rpm 2500 rpm 2800 rpm
184 247 219 294 246 329
184 247 219 294 246 329
184 247 219 294 246 329
184 247 219 294 246 329
166 222 197 265 221 296
MAX.
RPM

kW hp kW hp kW hp
2100 rpm 2500 rpm 2800 rpm
157 210 186 250 209 280
147 197 175 234 196 262
147 197 175 234 196 262
147 197 175 234 196 262
132 177 157 211 176 236
MAX.
RPM

kW hp kW hp kW hp
1800 rpm 2100 rpm 2300 rpm
109 146 127 170 139 186
105 140 122 164 134 179
105 140 122 164 134 179
105 140 122 164 134 179
94 126 110 147 120 161
MAX.
RPM
4500
4500
4500
4500
4500
Light Duty
RATIOS
'A' Pos
'B' Pos
1.235
1.533
1.750*
2.040
2.455
1.235
1.533
1.750
2.040
2.455
MAX. TORQUE
Nm
ftlb
838
838
838
838
754
618
618
618
618
556
POWER/RPM
kW
hp
0.0877
0.0877
0.0877
0.0877
0.0790
0.1177
0.1177
0.1177
0.1177
0.1059
4500
4500
4500
4500
4500
Medium Duty
RATIOS
'A' Pos
'B' Pos
1.235
1.533
1.750*
2.040
2.455
1.235
1.533
1.750
2.040
2.455
MAX. TORQUE
Nm
ftlb
712
667
667
667
601
525
492
492
492
443
POWER/RPM
kW
hp
0.0746
0.0698
0.0698
0.0698
0.0629
0.1000
0.0937
0.0937
0.0937
0.0844
4500
4500
4500
4500
4500
Continuous Duty
RATIOS
'A' Pos
'B' Pos
1.235
1.533
1.750*
2.040
2.455
1.235
1.533
1.750
2.040
2.455
MAX. TORQUE
Nm
ftlb
576
555
555
555
500
425
409
409
409
369
POWER/RPM
kW
hp
0.0603
0.0581
0.0581
0.0581
0.0524
0.0809
0.0779
0.0779
0.0779
0.0702
"A" POS = continuous running position (normally AHEAD). "B" POS = reverse position. B/W = Borg Warner adaptor.
07:52 PM GMT - 15-Mar-05
* Special Order Ratio
3200
3200
3200
3200
3200
ZF 220 A
Dimensions
mm (inches)
Angle
B1
B2
H1
H2
L1
L2
L3
10.0 145 (5.69) 187 (7.38) 187 (7.38) 116 (4.57) 230 (9.06) 376 (14.8) 246 (9.70) 93.0 (3.66) 40.0 (1.57)
Weight kg (lb)
Oil Capacity Litre (US qt)
50.0 (110)
4.00 (4.20)
SAE Bell Housing Dimensions

SAE No.
2
3
Bolt Holes
Diameter
No.
mm
in
mm
in
mm
in
mm
in
447.68 17.625 466.73 18.375 488.95 19.25 12 10.32 13/32
409.58 16.125 428.63 16.875 450.85 17.75 12 10.32 13/32
A
Output Coupling Dimensions

Bolt Holes
Diameter (E)
No.
mm in
mm
in
mm
in
mm
in
mm
in
121 4.76 98.4 3.87 63.5 2.50 15.0 0.59 6
12.0
0.47
A
07:52 PM GMT - 15-Mar-05
Refer to the Installation Drawing for detail.
Bell
Hsg.
2
ZF 220 A
Technical Notes
Duty Definitions
Highly intermittent operation with very large variations in engine speed and power
PLEASURE DUTY DEFINITION
Average engine operating 500 hours/year
hours limit: 300 hours/year for mechanical gearboxes
Typical hull forms: Planing.
Typical applications: Private, non-commercial, non-charter sport/leisure activities.
Intermittent operation with large variations in engine speed and power
LIGHT DUTY DEFINITION
Average engine operating 2500 hours/year
hours limit: (for hydraulic gearboxes smaller than the ZF 650 series, 2000 hours/year).
Typical hull forms: Planing and semi-displacement.
Private and charter, sport/leisure activities, naval and police activities.
Typical applications:
Intermittent operation with some variations in engine speed and power
MEDIUM DUTY DEFINITION
Average engine operating 4000 hours/year.
hours limit: 3500 hours/year for gearboxes smaller than ZF 2000 series and workboat ZF W2700 series.
Typical hull forms: Semi-displacement and displacement
Charter and commercial craft (example: crew boats and fast ferries), and naval and police activities.
Typical applications:
Continuous operation with little or no variations in engine speed and power
CONTINUOUS DUTY DEFINITION
Average engine operating Unlimited
hours limit:
Typical hull forms: Displacement.
Typical applications: Heavy duty commercial vessels, tugs, fishing boats.
Duty Ratings
Ratings apply to marine diesel engines at the indicated speeds. At other engine speeds, the respective power capacity (kW) of the transmission can be obtained
by multiplying the Power/Speed ratio by the speed.
Approximate conversion factors:
1 kW = 1.36 metric hp
1 kW = 1.34 U.S. hp (SAE)
1 U.S. hp = 1.014 metric hp
1 Nm = 0.74 lb.ft.
Ratings apply to right hand turning engines, i.e. engines having counterclockwise rotating flywheels when viewing the flywheel end of the engine. These ratings
allow full power through forward and reverse gear trains, unless otherwise stated.
Contact your nearest ZF Sales and Service office for ratings applicable to gas turbines, gasoline (petrol) engines, as well as left hand turning engines, and marine
transmissions for large horsepower capacity engines.
Ratings apply to marine transmissions currently in production or in development and are subject to change without prior notice.
Safe Operating Notice

The safe operation of ZF products depends upon adherence to technical data presented in our brochures. Safe operation also depends upon proper installation,
operation and routine maintenance and inspection under prevailing conditions and recommendations set forth by ZF. Damage to transmission caused by
repeated or continuous emergency manoeuvres or abnormal operation is not covered under warranty. It is the responsibility of users and not ZF to provide and
install guards and safety devices, which may be required by recognized safety standards of the respective country (e.g. for U.S.A. the Occupational Safety Act of
1970 and its subsequent provisions).
Monitoring Notice
The safe operation of ZF products depends upon adherence to ZF monitoring recommendations presented in our operating manuals, etc. It is the responsibility of
users and not ZF to provide and install monitoring devices and safety interlock systems as may be deemed prudent by ZF. Consult ZF for details and
recommendations.
Torsional Responsibility and Torsional Couplings

The responsibility for ensuring torsional compatibility rests with the assembler of the drive and driven equipment. ZF can accept no liability for gearbox noise
caused by vibrations or for damage to the gearbox, the flexible coupling or to other parts of the drive unit caused by this kind of vibration. Contact ZF for further
information and assistance. ZF recommends the use of a torsional limit stop for single engine powered boats, wherein loss of propulsion power can result in loss
of control. It is the buyer's responsibility to specify this option, which can result in additional cost and a possible increase in installation length.
ZF can accept no liability for personal injury, loss of life, or damage or loss of property due to the failure of the buyer to specify a torsional limit stop. ZF selects
torsional couplings on the basis of nominal input torque ratings and commonly accepted rated engine governed speeds. Consult ZF for details concerning speed
limits of standard offering torsional couplings, which can be less than the transmission limit. Special torsional couplings may be required for Survey Society Ice
Classification requirements.
07:52 PM GMT - 15-Mar-05
Driveline and Chasis Technology

Marine Propulsion Systems: Description

Uploaded by

Copyright:

Available Formats

Marine Propulsion Systems: Description

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Marine Propulsion Systems: Description

Uploaded by

Copyright:

Available Formats

Marine Propulsion Systems

Reverse reduction marine transmission with hydraulically actuated multi-disc clutches .

Lightweight and robust aluminum alloy casing (sea water resistant) .

Engine-matched dual stage coupling .

07:52 PM GMT - 15-Mar-05

SAMPLE POWER CAPACITIES

SAMPLE POWER CAPACITIES

SAMPLE POWER CAPACITIES

SAMPLE POWER CAPACITIES

* Special Order Ratio

Oil Capacity Litre (US qt)

SAE Bell Housing Dimensions

Output Coupling Dimensions

07:52 PM GMT - 15-Mar-05

Refer to the Installation Drawing for detail.

Safe Operating Notice

Torsional Responsibility and Torsional Couplings

07:52 PM GMT - 15-Mar-05

Driveline and Chasis Technology

You might also like