550 kVA /50 Hz /Standby (Fuel-Optimized) 380 - 415V Reference MTU 10V1600 DS550 (500 kVA Fuel and Exhaust-Optimized) for Prime Rating Technical Data
SYSTEM RATINGS Standby Voltage (L-L) Phase PF Hz kW kVA Amps skVA@30% Voltage Dip Generator Model Temp Rise Connection
380V 3 0.8 50 440 550 836
400V 3 0.8 50 440 550 794
415V 3 0.8 50 440 550 765
980 572RSL4029 150 C/40 C 4 LEAD WYE
1100 572RSL4029 150 C/40 C 4 LEAD WYE
1200 572RSL4029 150 C/40 C 4 LEAD WYE
CERTIFICATIONS AND STANDARDS
//
Generator set is designed and manufactured
in facilities certified to standards ISO 9001:2008 and ISO 14001:2004
//
Performance Assurance Certification (PAC)
- Generator Set Tested to ISO 8528-5 for Transient Response - Verified product design, quality and performance integrity - All engine systems are prototype and factory tested
//
Power Rating - Accepts Rated Load in One Step Per NFPA 110 - Permissible average power output during 24 hours of operation is approved up to 85%.
STANDARD FEATURES* MTU Onsite Energy is a single source supplier Global Product Support 2 Year Standard Warranty 10V 1600 Diesel Engine - 17.5 Liter Displacement - Common Rail Fuel Injection - 4-Cycle // Engine-generator resilient mounted // Complete Range of Accessories // // // //
Generator - Brushless, Rotating Field Generator - 2/3 Pitch Windings - PMG (Permanent Magnet Generator) supply to regulator - 300% Short Circuit Capability // Digital Control Panel(s) - UL Recognized, CSA Certified, NFPA 110 - Complete System Metering - LCD Display // Cooling System - Integral Set-Mounted - Engine Driven Fan //
STANDARD EQUIPMENT* //
Engine
Air Cleaners Oil Pump Oil Drain Extension & S/O Valve Full Flow Oil Filters Closed Crankcase Ventilation Jacket Water Pump Thermostats Blower Fan & Fan Drive Radiator - Unit Mounted Electric Starting Motor - 24V Governor Electronic Isochronous Base - Formed Steel SAE Flywheel & Bell Housing Charging Alternator - 24V Battery Box & Cables Flexible Fuel Connectors Flexible Exhaust Connection
//
Generator
NEMA MG1, IEEE and ANSI standards compliance for temperature rise and motor starting Sustained short circuit current of up to 300% of the rated current for up to 10 seconds Self-Ventilated and Drip-Proof Superior Voltage Waveform Digital, Solid State, Volts-per-Hertz Regulator No Load to Full Load Regulation
Brushless Alternator with Brushless Pilot Exciter
4 Pole, Rotating Field 150 C Maximum Standby Temperature Rise 1 Bearing, Sealed Flexible Coupling Full Amortisseur Windings 125% Rotor Balancing 3-Phase Voltage Sensing 0.25% Voltage Regulation 100% of Rated Load - One Step 5% Maximum Total Harmonic Distortion
//
Digital Control Panel(s)
Digital Metering Engine Parameters Generator Protection Functions Engine Protection CANBus ECU Communications Windows-Based Software Multilingual Capability Remote Communications to RDP-110 Remote Annunciator Programmable Input and Output Contacts UL Recognized, CSA Certified, CE Approved Event Recording IP 54 Front Panel Rating with Integrated Gasket NFPA110 Compatible
* Represents standard product only. Consult Factory/MTU Onsite Energy Distributor for additional configurations.
Manufacturer Model Type Arrangement Displacement: L (Cu In) Bore: cm (in) Stroke: cm (in) Compression Ratio Rated RPM Engine Governor Max Power: kWm (bhp) Speed Regulation Air Cleaner
At 75% of Power Rating: L/hr (gal/hr) At 50% of Power Rating: L/hr (gal/hr)
//
109.4 (28.9) 82.9 (21.9) 62.5 (16.5)
Cooling - Radiator System
Ambient Capacity of Radiator: C (F)
Max. Restriction of Cooling Air, Intake, and Discharge Side of Rad.: kPa (in. H20) Water Pump Capacity: L/min (gpm) Heat Rejection to Coolant: kW (BTUM) Heat Rejection to After Cooler: kW (BTUM) Heat Radiated to Ambient: kW (BTUM) Fan Power: kW (hp)
Engine Jacket Water Capacity: L (gal) System Coolant Capacity: L (gal)
//
Fuel Consumption
61 (16) 60 (15.9) 99.3 (26.2)
Electrical
Electric Volts DC Cold Cranking Amps Under -17.8 C (0 F)
24 1,050
//
Air Requirements
Aspirating: *m3/min (SCFM)
Air Flow Required for Rad. Cooled Unit: *m3/min (SCFM) Remote Cooled Applications; Air Flow Required for Dissipation of Radiated Gen-set Heat for a Max of 25 F Rise: *m3/min (SCFM)
29 (1,017) 554 (19,564)
187 (6,618)
* Air density = 1.184 kg/m3 (0.0739 lbm/ft3)
//
Fuel System
Fuel Supply Connection Size
Fuel Return Connection Size Maximum Fuel Lift: m (ft) Recommended Fuel Total Fuel Flow: L/hr (gal/hr)
#10 JIC 37 Female
M20 x 1.5 Male Adapter Provided #6 JIC 37 Female M14 x 1.5 Male Adapter Provided 5 (16) Diesel #2 340.7 (90)
//
Exhaust System
Gas Temp. (Stack): C (F)
Gas Volume at Stack Temp: m3/min (CFM) Maximum Allowable Back Pressure: kPa (in. H20)
Drawing above for illustration purposes only, based on standard open power 400 volt generator set. Lengths may vary with other voltages. Do not use for installation design. See website for unit specific template drawings.
System Open Power Unit (OPU)
Dimensions (L x W x H) 3,416 x 1,873 x 2,032 mm (134.5 x 73.75 x 80 in)
Weight (dry/less tank)
4,552 kg (10,035 lb)
SOUND DATA Unit Type Level 0: Open Power Unit dB(A)
Standby Full Load
88.3
Sound data is provided at 7 m (23 ft). Generator set tested in accordance with ISO 8528-10 and with infinite exhaust.
EMISSIONS DATA NOx + NMHC C/F
CO C/F
RATING DEFINITIONS AND CONDITIONS
PM C/F
C/F = Consult Factory/MTU Onsite Energy Distributor
N/A = Not Available MTU Onsite Energy A Rolls-Royce Power Systems Brand www.mtuonsiteenergy.com
Standby ratings apply to installations served by a reliable
utility source. The standby rating is applicable to varying loads for the duration of a power outage. No overload capability for this rating. Ratings are in accordance with ISO 8528-1, ISO 3046-1, BS 5514, and AS 2789. Average load factor: 85%. Operating hours per year: Max. 500. // Deration Factor: Altitude: Consult your local MTU Onsite Energy Power Generation Distributor for altitude derations. Temperature: Consult your local MTU Onsite Energy Power Generation Distributor for temperature derations. //
MTU Onsite Energy. Subject to alteration due to technological advances. OE 23 556 (77 3E) 2014-08
Weights and dimensions are based on open power units and are estimates only. Consult the factory for accurate weights and dimensions for your specific generator set.
