F.D. Accesssory Brochure
F.D. Accesssory Brochure
F.D. Accesssory Brochure
FORMWORK ACCESSORIES
Wing Nut
A knock on wing nut used in
conjunction with waler plates for
securing tie rods in formwork
applications.
Hexagon Nut
Suitable for all 15mm tie bars and for
use in situations where access is
restricted. Ideal for use by precasters and mould makers.
Ribbed Connector
Water Barrier
An economical cast dual purpose
water barrier/connection nut.
Item
Failing
Load
Weight kg
Dywidag
15
Dywidag
20
Dywidag
26.5
195 kn
1.55
Stock
lengths
(m)
6.0
345 kn
2.50
12.0
568 kn
4.50
12.0
Item
Failing
Load
Weight kg
15
20
26
165 kn
300 kn
510 kn
1.55
2.60
4.60
Stock
lengths
(m)
6.10
6.35
6.30
Item
Wing Nut 15 mm
Weight Kg
Wing Nut 20 mm
Wing Nut 26 mm
0.40
0.90
0.36
Item
Mm
Weight Kg
70
0.58
100
0.70
Item
Pressed Waler Plate
120 x 120 x 10
Weight Kg
1.30
Item
Plain Waler Plate
120 x 120 x 12
Waler Plate
120 x 120 x 20
Waler Plater
150 x 150 x 30
Item
Weight Kg
1.30
15 x 25 mm
0.10
15 x 50 mm
0.21
20 x 60 mm
26 x 85 mm
5.00
8.00
Item
Weight Kg
Ribbed Water
Barrier/Connection Nut
0.5
2.30
5.38
Weight Kg
2
Connection Nut
Used for joining tie rods. Complete
with centre stop to ensure equal
spacing of tie bar inside the
connector.
Item
Connection Nut 15
Weight Kg
0.46
Connection Nut 20
0.65
1.40
Item
Water Barrier
Weight Kg
Item
Reducer
Pack Size
250
0.55
Item
Size mm
Weight Kg
Water Barrier
15
Water Barrier
20
120 x 120
0.60
Plate
120 x 120
1.15
MKK Cone
Item
MKK
Cone
15
MKK
Cone
20
MKK
Cone
26.5
Dim
A
mm
95
Dim
B
mm
50
D
mm
C
mm
A/F
mm
Wt
Kg
61
40
27
0.50
126
65
42
70
32
0.77
135
70
57
103
46
1.70
SKK Cone
Item
Weight Kg
SKK Cone
1.27
Spanner
2.50
Spring Clamp
Item
Weight Kg
Spring Clamp
0.47
Tension Tool
3.43
Steel Cone
Item
Re-Usable Steel Cone
15
Re-Usable Steel Cone
20
Weight Kg
0.65
0.95
3
FORMWORK ANCHORS
Item
Fitsch
Weight Kg
0.40
Item
Weight Kg
Drop in Anchor 15 mm
0.2
0.3
Load
Direction
Axial
Tension
Diagonal
Pull 45
Shearing
90
APT Anchors
The new APT anchor range of fixings
provide the construction professional
with a single fixing anchor for the
majority of fixing needs.
A fixing for all substrates. No plugs
or inserts needed.
Mechanical Anchor
For securing single sided formwork
to rock or concrete walls. Hole
diameter required: 35mm37mm.
Conduct tensile tests before applying
final load. A rock anchor for 20mm
tie rod is available. Technical details
on request.
Size mm
Areas of Application
Concrete Brick Wood
Stone Block Marble.
Thread designed to provide
positive anchorage into the
substrate.
Thread provides safe anchorage
over full embedment of anchor.
Threaded anchorage is not
subject to expansion pressure
and maintains its fix without
preload.
No expansion gives close edge
fixing ability.
8 x 60
8 x 75
8 x 100
10 x 75
10 x 100
10 x 150
12 x 75
12 x 100
12 x 130
12 x 150
12 x 200
Concrete Strength
15 N/mm
25 N/mm
35 N/mm
17.0
21.9
26.0
21.5
27.8
32.8
27.5
35.5
42.0
Hole Depth
mm
75
90
115
95
120
170
95
125
155
175
225
Bar Diameter
Weight Kg
15 mm
20 mm
0.30
0.69
4
Uni - Sleeve Anchor
Item
Pack Size
100
Form Anchor
O/A Length
Thread
Length
Failing
Load
130 mm
65 mm
100 Kn
Recoverable Anchor
Screws
Applications
anchoring single-sided
formwork, etc.
clamping tunnel formwork
lifting and positioning of precast elements
anchoring scaffolding
anchoring tower
cranes/hoists
anchoring cantilevers and
drawer-forms
Economy
Reusable over 50 times with costs
recovered with as few as six re-uses
Easy extraction
Lightly oiled or greased anchors
unscrew from the concrete with a
single blow to the extractor.
Recomend
ed Safe
Working
Load
50 Kn
Spacer Tubes
Used as a distance spacer between
formwork faces, they allow tie rods to
be withdrawn for re-use. Available in
2m and 3m lengths.
Internal
Diameter
mm
22
26
32
34
40
50
106
External
Diameter
mm
26
30
36
40
46
54
110
Internal
Diameter
mm
19
26
Weight kg
0.184
0.214
0.285
0.350
0.470
0.410
1.200
Number
In
Pack
50
25
25
25
25
25
25
External
Diameter
mm
25
31
Cones - Expendible
A wide range of single use plastic
cones, for use with spacer tubes
22mm to 32mm diameter giving
required concrete covers of 10mm,
12mm and 15mm.
Cones Re-Usable
Manufactured from a rigid PVC, this
range of cones can be extracted
easily for re-use with the aid of
a cone key. For use with spacer
tubes 22mm to 40mm in diameter,
giving concrete covers from 20mm
to 50mm.
For Spacer
Tube
K22
Concrete
Cover
10 mm
Number
In Pack
500
Weight
Kg/1000
4.40
K22
15 mm
500
8.26
K26
12 mm
500
17.10
K 32
12 mm
500
12.30
For Spacer
Tube
K22/26
Concrete
Cover
25 mm
Number
In Pack
500
Weight
Kg/1000
16.60
K22/26
35 mm
250
21.48
K22/26
50 mm
250
29.75
K22/26
50 mm
125
25.00
K26/30
25 mm
250
15.84
K26/30
50 mm
125
26.00
K32/36
30 mm
250
28.52
K40/46
20 mm
125
20.00
Cone Key
0.34
6
Plugs
An easy cost effective way of
plugging the end of spacer tubes
prior to making good.
Item
No. In Pack
Weight Kg/1000
Plug 20
Plug 22
1000
1000
1.85
2.37
Plug 26
1000
5.00
Plus 32
500
4.45
Plug 40
250
12.00
Item
Pack Quantity
Weight Kg/1000
Flupp 20
Flupp 22
1000
1000
8.50
9.50
Flupp 26
500
14.40
Flupp 32
500
25.00
Item
Pack Quantity
Weight Kg/1000
WARO
100
3.0
Flupp
A flexible, tight fitting plug for
the internal water sealing of PVC
spacer tubes prior to filling with a
recommended grout.
Adoplug
A specially developed cement for
plugging and waterproofing tie
holes in concrete walls, becoming
waterproof within hours and
withstanding a hydrostatic pressure
of 10 bar after full curing. Trowel
applied. Water Council approved.
Item
Keg Weight Kg
Adoplug
8.0
TAPES
Formwork Tape
A tough, high matt PVC tape used
for covering joints in formwork
shutters.
Excellent adhesive qualities even
when residual oil and dust are
present.
Supplied in single rolls or boxes of
18.
Length
Width
33 mm
50 mm
7
Formwork Foam Tape
Width
Thickness
Length
12 mm
24 mm
6 mm
12 mm
10 m
5m
Keg Size Kg
7.0
Formwax
Keg Size Kg
20.0
Silicone Sealant
310 ml
Item
Size
Aerosol
Canister
Foam Gun
Cleaner
750 ml
750 ml
Each
0.5 Litre
Plugs
Item
No. In Pack
Weight Kg/1000
Plug 20
Plug 22
Plug 26
Plug 32
Plug 40
1000
1000
1000
500
250
1.85
2.37
5.00
4.45
12.00
8
REINFORCEMENTS - ACCESSORIES
Tying Wire
Item
Pack
16 Gauge
18 Gauge
15 Kg
Various
Reelfix
Item
Refill Spool
Dispensing Wheel
Tyling Tools
Item
Length mm
Pack Quantity
150
1000
250
1000
300
1000
Protection Caps
Bar Size mm
Pack
8 18
16 - 32
250
125
Item
Cartridge Gun
Resin Cartridge
9
DOWEL BARS
Dowel Bars
High yield or mild steel round bars,
supplied with either cropped or sawn
ends. Any size of bar is available
upon request.
Stainless steel dowel bars available
Diameter mm
Length mm
12
450
12
600
12
900
16
400
16
600
20
500
20
550
20
600
20
900
25
600
Bar Diameter
mm
12
16
20
25
32
Length
mm
100
100
100
100
100
Pack
Quantity
100
100
100
100
100
Bar Diameter
mm
12
16
20
25
32
Length
mm
450
200
300
300
375
Pack
Quantity
100
100
100
100
100
Debonding Compound
Pack
5 Litre
25 Litre
Brush
Slab Depth mm
150-180
190-230
240-300
150-180
190-230
240-300
10
KICKERS
Item
Size mm
Kik Anchor
200
Kik Anchor
400
Threaded Bar
150
Threaded Bar
200
N/A
M 16 Bar
N/A
Bar Length mm
Includes End Caps
150
175
200
250
300
We can provide
Kik Lok anchors for any wall width
from stock.
PROFILE FORMERS
Angle Fillets
Manufactured from impact resistant
PVC. Used to form chamfered edges
to beams, columns and walls.
Supplied with or without tails for
nailing.
2.5 metre lengths.
Size Plain mm
10 x 10
100
15 x 15
100
20 x 20
100
25 x 25
100
15 x 15
100
20 x 20
100
25 x 25
100
GEOTEXTILES
Geolay
A geotextile fabric, manufactured
from extruded polypropylene tapes
which are resistant to all naturally
occurring soil acids and alkalis. Used
for the ground stabilisation to stop
inter-mixing of the top granular layer
with soft sub-grade.
Size
4.5 x 100m
11
BEAM-FORM
Item
Unit
Disposable Formwork
33mm Roll
Cutting Knife
Each
12
GROUND HEAVE
Claylite
A compressible fill, low density
expanded polystyrene. Used to
reduce the pressure exerted on
reinforced concrete ground
beams or on the vertical face of
concrete foundations, caused by the
expansion of clay soils (clay heave)
during the life of the structure.
Claylite for standard applications
with ground beams and in even
sided trenches.
Claylite Castellated for fitting under
lightweight ground beams.
Claylite Super for extra strength in
uneven sided trenches.
Claylite Super Castellated gives
added strength and stability over
Claylite Castellated.
Item
Size
50 mm Claylite
75 mm Claylite
1.2 x 2.4 m
1.2 x 2.4 m
100 mm Claylite
1.2 x 2.4 m
Length
Width
Thickness
2m
0.445m
0.575mm
Weight
Sheet
4.272
3m
0.445m
0.575mm
6.408
PERMANENT FORMWORK
Formrib (Expamet
Hy-Rib)
An expanded zinc coated steel mesh
sheet, used during concrete pours to
form construction joints and stop
ends.
Can also be used in the construction
of in situ horizontal floor slabs. Easily
cut and bent into required shape
POLYTHENE
Thickness m
Pack
125
200.0
Roll
250
100.0
Roll
300
100.0
Roll
500
50.0
Roll
Grade
Pack
Medium
200.0
Roll
Heavy
100.0
Roll
Polythene Sheeting
An economical general purpose
sheet for a variety of site uses.
Supplied in 4 metre widths (folded).
13
CONCRETE SPACERS
Single Cover
Cover mm
Pack Quantity
20
500
25
500
30
250
35
250
40
250
50
250
60
200
75
100
Double/Triple Cover
Cover mm
Pack Quantity
25 & 30
500
30 & 40
250
35, 45 & 50
200
40 & 50
200
50 & 60
100
65 & 70
50
35, 40 & 50
200
Mesh Blocks
Cover mm
Weight Kg
40 & 50
100
Cover
Length
30 mm
Metre
40 mm
Metre
50 mm
Metre
60 mm
Metre
75 mm
Metre
100 mm
Metre
Cover mm
Pack Quantity
25 & 30
250
40 & 50
200
65 & 75
200
90 & 100
100
PLASTIC SPACERS
14
Continuous Plastic
Spacer
An extremely versatile and stable
plastic spacer for the support of
reinforcement in horizontal and
vertical applications. It is easily and
quickly positioned with no wiring
required. Ideal for use on hollow
ribbed decks. Can easily be cut
or sawn.
Cover
mm
15
20
25
30
35
40
50
Length
m
2.50
2.50
2.50
2.50
2.50
2.50
2.50
Pack
Metre
100
100
100
50
50
50
50
Cover
mm
20
25
30
40
50
Bar
Diameter
4 - 12
8 20
8 20
8 20
8 - 20
Pack
Size
1000
500
500
250
250
Fix Spacer
Cover mm
Bar Diameter
15
20
25
30
35
40
50
4 to 16
4 to 16
4 to 16
4 to 16
4 to 16
4 to 16
4 to 16
Wire Deckchairs
Height mm
Pack Quantity
50
60
75
90
105
120
135
150
165
180
200
Height mm
25
25
25
25
25
25
25
25
25
25
25
Pack Quantity
50
60
75
90
105
120
135
150
165
180
200
25
25
25
25
25
25
25
25
25
25
25
WIRE SPACERS
15
FROST PROTECTION
Size
75m x 2m x 10mm
45m x 1.67m
CRACK INDUCERS
Size
5m x 50mm
Bottom Type
Size
5m x 40mm
Aluminium T Bar
Size
50mm
5m x 75mm
5m x 75mm
75mm
JOINT FILLERS
Fibreboard
Sheet Size
Void Formers
A re-usable PVC void former for
forming grooves in concrete, prior
to sealing with joint sealant.
Manufactured in 3 metre lengths.
Available in full or half sections.
Joint Thickness
Metre
Metre
Metre
Metre
Size
3m x 20mm x 10mm
3m x 20mm x 20mm
3m x 25mm x 12mm
3m x 25mm x 25mm
16
Polyfoam Joint Filler (30
kg Density)
A closed cell expanded polyethylene
foam used for expansion joint in
concrete slab construction and
brickwork joints. Available in sheet
form or cut to size with an option for
25mm rip-off strip for subsequent
sealing.
Size mm
12 x 2000 x 1600
12 x 2000 x 1600
12 x 2000 x 1600
Slab Depth
Joint Thickness
Metre
Metre
Metre
Metre
Sheet
Size
0.914m x 2.134m
Length
Size
2.13m
2.13m
2.13m
2.13m
2.13m
JOINT SEALANTS
Joint Sealant
(Pitch/Polyurethane)
A cold poured expansion joint
sealant for roads and runways.
Item
Unit Litres
Pouring Grade
5.0
Gun Grade
2.5
Primer
1.0
Unit SizeLitres
4.50
1.00 Primer
5.00 Primer
Conforms to BS 5212.
Size
20 kg
17
Polyurethane Sealant One Part
A high movement elastomeric
sealant supplied in 600cc foil
containers ready for immediate use.
It has been tested for use in contact
with drinking water and has excellent
adhesion properties when used in
conjunction with Primer P.U. Should
be used to seal expansion,
contraction and construction joints in
concrete reservoirs, water treatment
works, pumping stations, sewage
treatment works, canals and joints in
brick/block construction.
Item
Size
One Part
600cc
Barrel/Gun
Each
Tool Cleaner
2.5 Ltrs
Primer P
1 Ltr
Item
(dia in mm)
10
12
15
20
25
30
40
50
Barrel Gun
Size
600cc
Mixing Paddle
Unit
Each
Follower Plate
Unit
Each
Pack Size
(Meters per Box)
1100
900
500
300
200
150
80
50
18
Turks Head Brush
Item
Unit
Brush Short
Each
Brush Long
Each
Tool Cleaner
Size
5 Litre
Non-Shrink Grout
A high strength non-shrink
multipurpose cementitious grout that,
with the addition of water, produces
a free flowing grout. Ideal for the
grouting of holding down bolts.
Length
mm
225
305
375
460
535
610
760
Taper
70 x 70
92 x 20
108 x 25
114 x 25
118 x 30
133 x 30
133 x 30
Length
mm
150
225
300
375
450
525
610
Length
mm
150
225
300
375
450
600
Diameter
mm
75
75
75
100
100
100
Size mm
16 x 200
16 x 250
16 x 300
16 x 350
16 x 400
20 x 200
20 x 250
20 x 300
20 x 350
Item
Size mm
20 x 400
20 x 450
20 x 500
24 x 250
24 x 300
24 x 350
24 x 400
24 x 450
24 x 500
Non-shrink Grout
Grout Additive
19
SCREEDING
Size
mm
3000 x 50
3000 x 100
3000 x 150
For Slabs up
To mm
110
160
200
Item
Base
Collar
Saddle
Shaft
Saddle mm
Pack Quantity
60
100
90
100
140
100
Base mm
Pack Quantity
Combinations mm
65
100
90
100
140
100
240
100
315
100
390
100
115 150
140 205
190 x 305
290 405
365 x 480
440 x 555
Rails per
Pack
45
33
22
Pack
Quantity
100
100
100
50 cm
Slab Thickness mm
0 - 500
WATERSTOPS PVC
Item
Size mm
Dumbell
Construction
Dumbell
Construction
Dumbell
Construction
Centrebulb
Expansion
Centrebulb
Expansion
Centrebulb
Expansion
150
Roll Size
Metre
15.0
200
15.0
250
12.0
150
15.0
200
15.0
250
12.0
Flat Dumbell
Centrebulb
20
PVC Waterstop-External
Item
Size mm
Extraseal
Construction
Extraseal
Construction
Extraseal
Expansion
Extraseal
Expansion
200
Roll Size
Metre
15.0
250
12.0
200
15.0
250
12.0
Extraseal Construction
Type
Waterstop Jig
Used for joining PVC waterstops.
Jigs available for each profile.
Hot Knife
110v Hot knife for use on site when
welding the PVC waterstop together.
Item
Waterbar Jig
Item
Hot Knife
WATERSTOPS HYDROPHILIC
Dual Seal
Item
Dual Seal
(Standard)
Dual Seal
(Saltwater Grade)
Bentorub
Item
Size
Bentorub
Bentorub Cage
5 Metres
1 Metre
Roll Size
Metre
8.00
8.00
21
Swelltite
Swelltite Hydrophilic Waterstop is
manufactured from a Neoprene
Polymer based hydrophilic
compound and high water absorbent
resins. Swelltite has been specifically
designed for use in sealing
construction joints between pre-cast
concrete units, steel and in-situ
concrete. Unlike traditional
waterstops, Swelltite is centrally
placed and bonded flat in the joint
prior to making the second pour.
Activated by water, Swelltite will
swell up to five times its volume
and seals the passage of water by
exerting pressure across the joint.
Size Metre
15 Metre Roll
1 Litre Primer
WATERPROOFING MEMBRANES
Bitusheet XL
Item
Unit Size
Bitusheet XL
1.05 x 19.05m
Item
Unit Size
1.22 x 7.32m
Bitusheet Primer
Item
Unit Size
Bitusheet Primer
Bitusheet Primer
Bitusheet Mastic
48/48mm Fillet
5 ltr
25 ltr
25 ltr
Metre
Bitusheet Tapes
Item
Reinforcing Tape
Reinforcing Tape
Reinforcing Tape
Double Sided Tape
Double Sided Tape
Double Sided Tape
Double Sided Tape
Double Sided Tape
Unit Size
100mm x 20m
150mm x 20m
300mm x 20m
50mm x 15m
75mm x 15m
100mm x 10m
150mm x 15m
300mm x 15m
22
Protection Boards
Item
Unit Size
3mm Bituminous
6mm Bituminous
3mm Bitcoat
1.5mm Bitusheet HD
3mm Bitusheet HD
2mm Polypropylene
2.13m x 1.22m
2.13m x 1.22m
1.85m x 1.25m
1m x 2m
1m x 2m
1m x 2m
WATERPROOFING LIQUIDS
Liquid Asphaltic
Compound
Liquid Asphaltic Compound is a
damp-proof solution, used in two
coats to provide a damp-proof
membrane on solid floors or for
protecting foundations, retaining
walls, abutments, beams, lintels
and similar structures against
moisture and attack from sulphates
contained within the soil.
Water Plug
Single component, rapid setting,
polymer modified mortar for arresting
severe water infiltration under
pressure through cracks and joints in
concrete and masonry in basements,
underground tanks and below
surface structures. It is ideally
suited for sealing around pipework
and forming fillets in tanking
situations.
Bitumen Emulsion
A special blend of rubber latex and
bitumen emulsion suitable for use as
a waterproofer, multi-purpose
adhesive and crack sealer. Brush
applied.
Drum Litres
25
Benefits
Barrier to water and water vapour
Forms a highly flexible membrane
Easy to apply
Application accommodates awkward details
Once dry resistant to frost
Resistant to sulphates
Size kg
8.0
25.0
Yield Litres
4.25
13.25
Advantage
Size
25 Litres
200 Litres
Coverage approximately 0.6-0.9 sq. metres per litre.
Release Agents
A universally accepted release agent
of high specification, giving excellent
release characteristics and
substantial reductions of blowholes
and surface blemishes. Resistant to
weathering.
Various grades are available
depending on application.
Drum Litres
205
25
205
Coverage approximately 25 - 60 sq. metres per litre.
23
Mould Oil
A versatile, high quality neat oil with
surfactant which is ideal for use on
metal, timber, other formwork
materials and coatings. Formulated
to give optimum release and quality
of finish to concrete over a wide
range of mix designs. Spray applied.
Curing Agents
A large range of highly specified
curing membranes to suit every
situation. Resin based giving 75% or
90% water retention while concrete
cures. Available with aluminium flake
for reflection of light and fugitive dye
for visible application. A silicate
based membrane is available for use
when a further surface treatment is
required. Spray applied.
Surface Retarders
Used for exposed aggregate
finishes, and surface keying of
construction joints. Mould face gel
applied to shuttering with brush. Top
face applied to fresh concrete with
spray.
Drum Litres
205
25
Coverage approximately 13 - 30 sq. metres per litre.
Item
Resin 75%
210
Resin 75%
25
Resin 90%
210
Resin 90%
25
Resin 90%
210
Aluminised
25
Silicate
250
Silicate
25
Resin Cleaning Fluid
25
Coverage Approximately 5 sq. metres per litre
Size
25 Litres
25 Litres
210 Litres
Coverage 1215 m2 per litre (gel type)
5 m2 per litre (spray type)
Drum Litres
25
Matchpatch
A specialised structural grade
cementitious repair cement, ideal for
the repair of in-situ or precast
concrete, masonry, screeds, renders,
brickwork and blockwork. It can be
used horizontally, vertically or over
head without any need for primers or
support. Trowel applied. 1kg yields
500cm.
Keg kg
25.0 (White)
25.0 (Grey)
Safelease
A formwork release agent using the
latest soluble polymer technology to
produce an environmentally friendly
and highly efficient release material
for concrete formwork on site.
Coverage 20-30m2 per litre
Drum Litres
Size Litre
25
210
24
Safecure Standard &
Super
Item
Size ltr
Standard
Standard
Super
Super
25
210
25
210
Safecure WW & WT
Item
Size ltr
Standard
Standard
Tinted
Tinted
25
210
25
210
Safetard Gel
Item
Size ltr
Gel
25
Safetard Liquid
Item
Size ltr
Liquid
Liquid
25
210
Sprayers
Item
Size ltr
Metal Spray
Plastic Sprayer
Knapsack Sprayer
Cleaning Fluid
11 Litre
10 Litre
15 Litre
25 Litre
25
COLUMN FORMWORK
Cardboard Disposable
An economical, single use spiral
wound, cardboard column former.
Manufactured to a high standard and
complete with a PVC liner, to give a
smooth finish to concrete surfaces.
Supplied with a built-in rip cord for
ease of stripping.
Columns are made to order and can
be supplied in any required height up
to the maximum recommended.
Used mainly for in-situ concrete pour
application.
Plastic Disposable
A disposable single use, fully
waterproof column shutter providing
a smooth concrete finish. The
column shutter can be manufactured
in virtually any diameter from 2001200mm. The columns can be stored
openly on site without any
detrimental effect.
Steel Re-usable
For re-use applications, column
shutters can be manufactured to
order from Steel. Supplied with
propping points and grout check
seals. Prices on application.
Internal
Diameter
mm
Wall
Thickness
mm
Weight
Per metre
kg
Max.
Recom.
Height of
continuous
pour metre
200
5.0
2.09
12
250
5.0
2.59
12
300
5.0
3.11
10
350
5.0
3.68
10
400
6.0
4.99
450
6.0
5.67
500
7.0
7.36
550
7.0
8.04
600
7.5
9.51
635
7.5
9.94
Item
Plastic Column Shutter
Available 200mm 1200mm Diameter
Item
Steel Column Shutter
Polystyrene Re-usable
Item
GENERAL PRODUCTS
Item
Standard
Standard
Standard
Flexible
Flexible
Flexible
Size mm
450 x 22
600 x 22
Size
M x mm
3 x 100
3 x 150
3 x 200
3 x 100
3 x 150
3 x 200
26
Fencing Pins
Size m x mm
1.35 x 12.00
Standard
Prop
No 0
Closed
(m)
1.041
Open
(m)
1.829
Weight
(Kg)
11.28
No 1
1.753
3.124
16.34
No 2
1.981
3.352
17.48
No 3
2.590
3.962
20.20
No 4
3.200
4.876
23.84
Trench Struts
Size
No 0
Closed
(m)
0.32
Open
(m)
0.47
Weight
(Kg)
5.0
No 1
0.49
0.73
7.0
No 2
0.69
1.09
9.0
No 3
1.03
1.73
13.0
Item
Safe Working
Load Tonne
0.5
1.2
2.0
2.5
4.0
Lifting Loops
DxE
12 x 22
16 x 27
20 x 35
24 x 37
30 x 50
Model
DxH
RD 12 x 60
RD 16 x 80
RD 20 x 95
RD 24 x 100
RD 30 x 150
H
mm
155
155
215
255
300
Load
Tonne
0.5
1.2
2.0
2.5
4.0
Pack
500
250
150
100
50
Pack
50
50
25
25
10
27
CHANNEL SYSTEMS
Item
Apex Channel
Apex Channel
Item
Frame Fix Ultra
Length
mm
100
3000
Length
mm
2700
Channel Ties
Item
SYSTEMS
Length
mm
100
150
200
28
Preguard
PREGUARD is an advanced guardrail system,
enabling scaffolders, using either tube and fitting or
system scaffold, to install collective edge protection
on the lift above prior to commencement of work on
the next level.
Using telescopic guardrails attached to
an innovative vertical post, PREGUARD removes
the need to work at height without guardrail
protection.
Alsipercha
Safety system designed to prevent falls from height
during the decking for horizontal formwork operation.
This is a 0 factor fall arrest system that is
particulary useful on PERIMETERS. It provides total
safety when placing: decking
panels, edge protection, slab edges, stop ends and
generally all situations that may arise during the
formworking process, where there is a risk of a fall
from height.
It is easy to assemble and use. No external
accessories are required
SCAFFSTEP
The SCAFFSTEP is a step-up device, designed to
enable a scaffolder to reach up to erect and dismantle
scaffolding in a safe manner. The scaffolder is prevented
from falling by a guardrail that is already in place, and the
SCAFFSTEP utilises a ledger above which eliminates
the need for additional components to be used.
SCAFFSTEP can be used in any position along the
guardrail, not just at the standard; giving the user the
flexibility to attach the SCAFFSTEP at the optimum
position along the platform.
The feet at the bottom of the SCAFFSTEP are
adjustable to accommodate different guardrail heights, and
together with a nonslip working surface, provides the
scaffolder with a safe working platform when working with
tube and fitting, as well as all systems using tubular
ledgers.
The SCAFFSTEP is often used in pairs, with two
operatives working together, particular on longer facades
29
SMB STAIRS
Temporarily protecting the edges of stairways during
construction has previously been complicated and
expensive. The varied nature of the stairs, landings, and
returns, often required many cut tubes, sharp ends, and
much purpose built protection. The new Steel Mesh Barrier
Stair (SMB Stair) has be designed to solve these
problems, offering a systemised solution that can
stand alone or integrate with either SMB system.
The SMB Stair provides continuous edge protection along
staircases, and at returns the Gap Closer ensures
continuity and protects any sharp edges. The landings are
protected using the
SMB system, linking seamlessly to the SMB Stair. The
SMB Stair is supported on the adjustable posts, and can
be fitted to any angle of permanent or temporary stairway.
It can also be raised
to allow access to work on the outside edge of the stair
unit. The SMB Stair is a single component, and can be
fitted to either side of the staircase
Needle Propping
Alongside the major Faade Retention schemes,
Formwork Direct provides the same proactive
approach to smaller needling, propping and general
shoring requirements within existing structures.
Works carried out include projects from major multistorey back-propping through to needling to allow the
removal of load bearing walls and the formation of
new openings.
Formwork Direct can tailor a bespoke solution for
your project. Depending on the size of the project,
our needling schemes most commonly make use of
our 200 kln ranges or, 100 kln props for smaller
jobs, Formwork Direct proprietary needling system
can provide temporary support whilst permanent
lintels are installed.
Facade Retention
Formwork Direct has provided solutions to a wide
variety of Faade Retention requirements throughout
the UK. We regularly produce and execute schemes
in tight city centre situations where both space for
construction and accurate information regarding the
existing structure are restricted.
Solutions are engineered to be least intrusive to both
the public and the reconstruction of the building,
external cantilever systems can be portalised to
allow pedestrian access through the frame, site
cabins can be built into the structure saving space on
site.
30
Push-pull props
The Formwork Direct push-pull prop is a versatile, well engineered
and complete system. It replaces the traditional prop (shore) and
tensioning chain arrangement with a single prop that works in both
tension and compression to provide a versatile and economic
solution for a wide variety of applications.
Acrow Propping
Prop Head: 150 x 150mm plates with holes for securing to timber
beams or facilitating the use of accessories.
Prop Inner Tube: 48.3mm O.D. tube (standard scaffolding tube size)
with holes at 152.5mm centres. Tube diameter enables standard
scaffold tube and couplers to be used for bracing purposes.
Size
Prop Size 0
Prop Size 1
Prop Size 2
Prop Size 3
Prop Size 4
Height Closed m
1.041
1.753
1.981
2.590
3.200
Height Open M
1.829
3.124
3.352
3.962
4.876
Weight kg
12.95
18.64
19.55
22.27
26.36
Height open m
0.475
0.686
1.092
1.676
Weight kg
4.99
6.58
8.62
11.79
Trench Struts
Size
Strut size 0
Strut size 1
Strut size 2
Strut size 3
Height Closed m
0.305
0.475
0.685
1.016
Shoring Products
FWD can provide various shoring solutions with an enviable range of shoring
products, and a determination to provide an added value service, FWD can
provide a tailor made solution to virtually any shoring application
requirement.
FWD can provide modular galvanised steel shoring systems. We can also
supply lightweight aluminium systems to suit your needs.
31
SCAFFOLD TUBE
STAIR TOWERS
Stair Towers
Safe access to working platforms is of
the utmost importance. This is why we
supply modular access stair
towers built to HD1004 standard, with
rest platforms at every level that make
carrying items safe and practical.
When installed with our Combisafe
System, Formwork Systems, Scaffolding
Systems, the stair tower dictates where
workers can safely access the work area.
We supply a wide range of stair Towers
one of which is our own in house
design (We Carry Layer, HAKI, Uni Scaff,
Kwik Stage, Cup Lock, and also a wide
range of Aluminum Towers) For more
information please contact us.
32
SYSTEM SCAFFOLD
System Scaffold
General Application for System
Scaffold
In all applications, system scaffolds in
general they have several advantages
over traditional tube and fitting scaffolds.
This is illustrated by the ever-increasing
use of this type of scaffold in the
construction environment, and the trend
within the scaffolding industry away from
tube and fittings when replacing or
increase stocks of materials.
Formwork direct is aware of this situation
and offers a comprehensive supplier
service based on various systems. System
scaffolding has a wide variety of
applications, and major benefits to the
customer include:
Speed - The in-built joints, clearly
identifiable components and the strong,
simple wedge connections, guarantee a
faster erection time.
Safety - In the very earliest stages of the
erection process, the wedge connections
ensure that ledgers and braces are
secured to the standards, and there is no
risk of materials falling. The wedge lock
system guarantees that all ledgers and
diagonal braces are secured immediately
they are placed. This allows immediate,
safe erection by just one person at any
height. The system scaffold enables a
reduction in material usage as compared
to traditional scaffolding, for instance it
dispenses with the need for ledger bracing
in many applications.
Panel System
We can offer great rates on various panel
systems for hire and for sale.
If you would like to discuss your needs
with our sales team please contact us
Industrial Applications
In the Industrial field, system scaffold has
proved its advantages in many locations. It
allows working platforms, whether in the
form of towers, birdcages or hanging
scaffolds, to be quickly formed to facilitate
all maintenance and installation of
insulation, and construction projects.
33
SCAFFOLD FITTINGS AND ACCESSORIES
Doubles
We can supply drop forged
and pressed steel options.
All being fully certificated to
B.S EN 39 complete with
test certification and
covered by our worldwide
Product liability insurance
audit trail.
Swivels
We can supply drop forged
and pressed steel options.
All being fully certificated
to B.S EN 39 complete
with test certification and
covered by our worldwide
Product liability insurance
audit trail.
Ladder Clamps
Our ladder clamps are high
quality, robust and ensure
safe attachment of
traditional wooden or
steel pole ladders
Singles
We can supply drop forged
and pressed steel options.
All being fully certificated
to B.S EN 39 complete
with test certification and
covered by our worldwide
Product liability insurance
audit trail.
Joints
We can supply drop forged
and pressed steel options.
All being fully certificated to
B.S EN 39 complete with
test certification and
covered by our worldwide
Product liability insurance
audit trail.
Girder Couplers
Our Girder Couplers are
always used in pairs.
Roofing Coupler
Our roofing coupler
encapsulates the CI Sheet.
This fitting comes with our
worldwide product liability
insurance audit trail.
Pressed Sleeve
We can supply pressed steel
sleeves. All being fully
certificated to B.S EN 39
complete with test
certification and covered by
our worldwide Product
liability insurance audit trail.
Tube Clamps
We stock a full range of
tube clamps in the size
48.3mm. Other sizes
including 26.9mm,
33.7mm, 42.4mm and
60.3mm are also available.
34
TIMBER AND ALUMINIUM BEAMS
Technical Information:
Standard Size
200mm(height)*80mm
(width)*40mm
(flange thickness)*
27mm(web thickness)
2.45,2.65,2.90,3.30,3.60,
3.90,4.50,4.90,5.90
Other beam lengths or web
thickness upon request
4.6kg/m
max.5 KN/m
max 11.2KN
max 1/500
max 1.5 KN/m2
12%-14%