Nexa English Pump Lash Pash

Nexa Series
PLUNGER AND HYDRAULIC DOUBLE

DIAPHRAGM METERING PUMPS
innovation
> technology > future
Nexa Series
A line of plunger and hydraulic
double diaphragm metering
pumps designed according to
the API 675 standards.
The flexibility of using different
materials in contact with the
process fluid makes possible to
then satisfy a wide range of
dosing and mixing applications.
Hydraulic double diaphragm metering pump in AISI

316L stainless steel
Mechanisms
n Positive return type in different sizes
n Internal worm gearbox, oil bath
lubricated with low noise emissions
n Rotating parts on bearings to

minimize power consumption
n Each mechanism comes complete

with an internal gearbox; pumps
with different speeds (strokes/min)
can therefore be joined to form
multi-head pump units, allowing a
greater flexibility when selecting
the pumps themselves.
n Stroke adjustment with high

precision can be achieved, both
manually and automatically.
Electrical and pneumatic
servomotors designed by SEKO are
available. Also an increase of
turndown ratio can be achieved by
frequency converter varying the
speed of the electrical motor.
02 seko
> process & systems > metering pumps nexa series
The compliance with ATEX

directive makes SEKO pumps
suitable for being installed even
in classified areas.
Flexibility
The motor is horizontally assembled on the right, as standard. The pumps can
also be produced with a horizontal left side motor or even vertically assembled,
depending on the installation requirements.
Standard version with

horizontal motor
Special version with

vertical motor
Modularity
All Nexa mechanisms, even of different sizes, can be easily combined to form metering units with certain significant
construction advantages, simplifying assembly and installation.
n The mechanisms are coupled together using joints with no exposed parts; the result is a compact unit with a
strong and properly-aligned connection which does not require the use of a special base
n Another advantage is the possibility of adding a pump to another existing pump just by performing a few simple
coupling operations , even on site
Different size mechanisms can be

coupled; casings are designed to
maintain the same foot level, to allow
installation on a flat support base
Unit with 2 diaphragm heads and rupture
detection system
innovation
03
Nexa Series
YN, TN, HN: Hydraulic double diaphragm heads
The ideal solution for applications requiring high levels of
operational safety and reliability:
n Zero leakage; watertight construction for dosing toxic, corrosive

and other hazardous liquids, to which a leakage free solution is
fundamental
n Protection against external pollutants which could contaminate the

liquid being pumped if using plunger pumps
n Double diaphragm, double protection; if one of the two
diaphragms gets damaged, the protection system immediately
signals the anomaly; the pump is nevertheless permitted to
continue to operate, thereby preventing immediate downtime
n Flexibility of use; the PTFE diaphragms are compatible with a vast

assortment of liquids
n Flow rate modularity; the rated flow rate can be changed by simply
replacing the plunger and the relevant seal cartridge (change of
plunger diameter).
n Solid suspensions; the diaphragms proper positioning is ensured
by a mechanical system which does not require the use of
perforated shields on the process side, thereby allowing for liquids
containing solid suspensions to be pumped.
n Construction materials; the parts in the standard configuration in
contact with the liquid are made from AISI 316L stainless steel, PP
and PVDF. Other materials are available upon request.
PN, KN: Plunger heads

The simplest and most suitable solution for dosing and
transferring non-hazardous liquids; despite their simple
design PN and KN heads have certain special features which
provide for an extremely high performance
n Particularly precise plunger surface finishing, with increased
hardness for a longer working life
n Perfect alignment of the plunger in the seal
n Adjustable seal provided for flushing or leakage recovery
04 seko
Venting system
Features
Pressure relief valve
Standards
Local visual
indicator of the
diaphragm rupture
Cartridge valves
n Pressure
up to 200 barg (higher upon
request)
n Flow rate
up to 2650 l/h with a single
head
n Fluid temperature
from -10 C to 90 C (from -40
C to 150 C upon request)
n Contact materials
- AISI 316L
- PP
- PVDF
- Special configurations
available upon request
n Venting system
Aside from guaranteeing
automatic venting during
operation, the venting system
also facilitates the pump startup by favouring the air purge
by means of a manual action.
n Mechanical refilling
system
Maintains a constant level of
the hydraulic fluid, thereby
guaranteeing maximum
precision and repeatability.
Also maintains control over
the deformation of the
diaphragm, thereby
increasing its duration.
n Cartridge valves
In order to ensure maximum
dosing precision, even for
small flow rates, double and
triple ball configurations are
available with high precision
seats. They can be replaced
without disconnecting the
pump from the pipelines.
The metal gaskets for the AISI
316L stainless steel heads,
and the FPM gaskets for those
in plastic, guarantee
maximum compatibility.
n Pressure relief valve

Protects the pump against
unwanted excess pressure.
n Double diaphragm with
rupture detector
In the event that one of the
two diaphragms should
rupture, the detector activates
a local visual indicator or
signal; in this emergency
situation, the second
diaphragm guarantees the
pumps continued
functionality and allows for
the necessary maintenance
intervention to be scheduled.
n Separation of the
hydraulic fluid from the
mechanisms lubricant
The two fluids have
independent and
differentiated functions and
are therefore kept separate.
innovation
05
Nexa Series
Options
Accessories
n Automatic, electric or
pneumatic adjustment or
through an inverter
n Flanged connections
n Heated or cooled heads
n Transmission of the
diaphragm rupture signal
n Flow rate calibrators

n Pulsation dampers
n Safety valves
n Back pressure valves
ATEX metering pump equipped with an electric actuator for flow rate adjustment
06 seko
Applications
Industrial sectors
n Chemical
n Food & Beverages
n Detergents
n Power Generation
n Environment
n Oil & Gas
n Petrochemical
n Pharmaceutical
n Paper
n Textile
Double diaphragm metering pump with

PVDF head
Kolben-Dosierpumpe, Pumpenkopf aus

rostfreiem Edelstahl AISI 316L
innovation
07
A Worldwide Group at your service

seko is an International Group, developing, manufacturing and delivering its products in more than 50 countries,
through its subsidiaries and an extended network of distributors, agents and authorized dealers.
seko is a leading manufacturer of dosing pumps and dosing systems with more than 40 years experience. This long
activity allowed seko to acquire a vast experience in diversified applications and to confirm its international success
in many industrial fields through the supply of reliable solutions for the dosing, injection and transfer of liquids.
Centre of Excellence
Subsidiaries
ITAly
Seko Spa
[Process & Sytems]
20068 Peschiera Borromeo Milano
info.psd@seko.com
info@seko.com
FrANCE
Seko lefranc-Bosi S.A.
77435 - Marne La Vallee
Cedex 2
lefrancbosi@lefrancbosi.com
service.commercial@seko.fr
www.lefrancbosi.com
roMANIA
Seko Sieta S.r.l.
400393 Cluj-Napoca
info.dpro@seko.com
UNITED ArAB EMIrATES
Seko Middle East FZE
P.O. Box 42090 Hamriyah
Free Zone, Sharjah
info@seko.ae
sales@seko.ae
BrAZIl
Seko do Brasil
Commercio de Sistemas de
Dosagem limitada
03170-050 So Paulo (SP)
sekobrasil@sekobrasil.com.br
www.sekobrasil.com.br
BENElUX
n Seko Benelux B.V.
7532 SK Enschede
(The Netherlands)
info@sekobenelux.com
Subject to change without notice.
ChINA
Seko China ltd
072750 Hebei
china@seko.com
www.sekochina.com
DENMArK
Seko Denmark
DK-4930 Maribo
info@seko.com
GErMANy
Seko Deutschland
Gmbh
55252 Mainz - Kastel
info@seko-messtechnik.de
www.seko-germany.com
ITAly
Seko Spa
02010 S.Rufina - Rieti
sales@seko.com
rUSSIA
ooo Seko
129347 - Moscow
sekorussia@seko.com
www.sekorussia.ru
SINGAPorE
Seko Dosing Systems
Asia Pacific Pte ltd
608838 Singapore
asiapacific@seko.com
SPAIN
Seko Ibrica Sistemas
de Dosificacin S.A.
08960 Sant Just Desvern Barcelona
sekoiberica@sekoiberica.com
SwEDEN
Seko Sweden
26123 Landskrona
info@seko.com
TUrKEy
Seko Endstriyel
Pompalar ve Proses
Sistemleri San. ve
Tic. ltd. ti.
Kartal Istanbul
info@seko.com.tr
www.seko.com.tr
UNITED KINGDoM
Seko UK
Chemical Controls ltd
Harlow, Essex - CM19 5JH
seko.uk@seko.com
www.sekouk.com
USA
Seko Dosing Systems
Corporation
Tullytown - PA 19007
sales@sekousa.com
www.sekousa.com
SoUTh AFrICA
Seko Southern Africa
(PTy) ltd
Kyasand - Johannesburg Gauteng
sales@sekosa.co.za
> Seko SpA > Printed in Italy > Bro NEXA 14A-UK
For more information

www.seko.com

Nexa English Pump Lash Pash

Uploaded by

Copyright:

Available Formats

Nexa English Pump Lash Pash

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Nexa English Pump Lash Pash

Uploaded by

Copyright:

Available Formats

Nexa Series

PLUNGER AND HYDRAULIC DOUBLE

> technology > future

Hydraulic double diaphragm metering pump in AISI

lubricated with low noise emissions

n Rotating parts on bearings to

n Each mechanism comes complete

n Stroke adjustment with high

> process & systems > metering pumps nexa series

The compliance with ATEX

Standard version with

Special version with

Different size mechanisms can be

> technology > future

n Zero leakage; watertight construction for dosing toxic, corrosive

n Protection against external pollutants which could contaminate the

n Flexibility of use; the PTFE diaphragms are compatible with a vast

PN, KN: Plunger heads

n Adjustable seal provided for flushing or leakage recovery

> process & systems > metering pumps nexa series

n Pressure relief valve

> technology > future

n Flow rate calibrators

> process & systems > metering pumps nexa series

Double diaphragm metering pump with

Kolben-Dosierpumpe, Pumpenkopf aus

> technology > future

A Worldwide Group at your service

For more information

You might also like