Professional Documents
Culture Documents
Meraj Engineering - Catalogue
Meraj Engineering - Catalogue
MERAJ
ENGINEERING
Solution for Metal Industry
Company Profile
DRAW BENCH
Meraj designs and manufactures a full line of wire, rod, section and tube
processing Draw Benches (Hydraulic). Available are both gear box and
motorized chain type units along with a full selection of features and
accessories.
Draw Benches are used for straight length die-drawing of round rod, wire or
tube for producing straight lengths of shaped rod or wire
Meraj offers Single / Double / Triple Type Draw Benches with automatic
operations, designed for high yield, perfect quality and precise application
DRAW BENCH
FEATURE :
STRAIGTHTENING
5
Page
MERAJ ENGINEERING
Solution For Metal Industry
FEATURE :
Machines comprise of six / ten work rolls arranged in pairs.
Accuracy
MODEL Capacity (O.D) Max Dia Max. Wall Min. Wall Speed
Range mm mm Thickness Thickness
MTS 10 1-8 9 1.5 1.5 40
MTS 20 3-13 15 2.5 2 38
MTS 30 4-20 20 2.5 2.5 35
MTS 40 6-30 32 3.2 2.5 32
MTS 50 8-40 45 4.5 3.5 30
MTS 60 13-65 75 6.0 4.5 28
MTS 70 20-100 115 8.1 6.5 25
MTS 80 25-125 140 8.5 6.5 25
MTS 90 30-150 165 9.5 7 18
MTS 100 40-200 215 10.0 7 16
MTS 110 45-225 240 10.5 7.5 10
MTS 120 50-250 265 11.0 7.5 6
6
Page
MERAJ ENGINEERING
Solution For Metal Industry
ROLLS:
These are manufactured from alloy steel, hardened, hyperbolic profile-
ground and lapped to a very high degree of finish to give perfect
straightness and good surface finish.
The hyperbolic profile are designed and generated to accept the widest
range of tube diameters for a particular size range of the machine.
All the rolls are manufactured to the same dimensions, thus ensuring a
matched set.
Rolls are mounted on antifriction bearings.
ROLL CARRIERS:
These are designed to effect maximum roll stability, the carrier stalks being
of substantial proportions to eliminate any instability when fully extended.
MAIN DRIVE:
These are designed to effect maximum roll stability, the carrier stalks being
of substantial proportions to eliminate any instability when fully extended.
The drive to the rolls is accomplished from two totally enclosed gear boxes,
each having three/five output shafts, which are connected by universal
joints.
The lower three/five rolls are driven independently of the top three/five
rolls.
All the gears are single helical made out of alloy steel, through hardened and
ground.
The electric motors are connected to the input shaft of the gear boxes by
flexible coupling / Vee-Belt drive.
MACHINE LUBRICATION:
All the points requiring regular lubrication are provided with grease nipples.
The helical gears and bearing in the gear box operate in a totally enclosed oil
bath and are splash lubricated
7
Page
MERAJ ENGINEERING
Solution For Metal Industry
STRAIGTHTENING
8
Page
MERAJ ENGINEERING
Solution For Metal Industry
STRAIGHTENING (SECTION)
Meraj Offers A Range Of Section Straightening :-
Strip straightening
Hydraulically section de-twisting
Stretch straightening
Reciprocating strip decampering
FEATURE :
STRAIGTHTENING
9
Page
MERAJ ENGINEERING
Solution For Metal Industry
ROTARY SWAGER
Meraj Rotary swaging is a process for reducing the diameter of a length of
tubing. The reduced diameter can be any length, from a short end up to the
entire length of the tube, or any length in between. The tubing is fed by
hand, or mechanically, into custom made, hardened steel dies. Through the
reciprocating action of the die halves, the tube is worked into the shape cut
in the dies.
FEATURES:
Externally rigid Construction
Temper-Free Alignment
Excellent finishes & accuracy
Fast Set-up & Change over.
User-Friendly machines.
Cost-effective process
Increased tensile strength
An improved surface finish
The machines has no heating, hence this is purely a cold process. Hence, less
power consumption and highly suitable for industries engaged in mass
production of swaged parts/components. The machine circuit is
internationally designed & consumption of power is very less
10
Page
MERAJ ENGINEERING
Solution For Metal Industry
ROTARY SWAGER
11
Page
MERAJ ENGINEERING
Solution For Metal Industry
HYDRAULIC POINTING
FEATURE:
Free of VIBRATION
Free of NOISE
Free of MAINTENANCE
Free of FOUNDATION
Free of MOVABILITY
Round concentric reduction POINTING FOR EASY GRIP
Smooth operation with LOW TOOLING COST
LOW POWER COST
12
Page
MERAJ ENGINEERING
Solution For Metal Industry
TECHNICAL SPECIFICATION:
Capacity of the Machine:
Tube Diameter
A. Maximum reduction in one stroke 15mm 150mm to 75mm
B. Maximum reduction in one stroke 10mm 75mm to 30mm
C. Maximum reduction in one stroke 5mm 30mm to 15mm
13
Page
MERAJ ENGINEERING
Solution For Metal Industry
CUT TO LENGHT
MERAJ Pipe / Tube / Section Straight & Cut Machine
This machine is to straighten the Pipe / Tube / Section from coil, measure at
certain length and cut.
CUTTER MACHINE
15
Page
MERAJ ENGINEERING
Solution For Metal Industry
The fastest & easiest way of blade clearance setting without need of feeler
gauge, which helps burr-free edges
Technical Specification :
Capacity : 25mm Thickness
250mm Maximum Width
16
SHEARING MACHINE
Page
MERAJ ENGINEERING
Solution For Metal Industry
Technical Specification:
COILER MACHINE
17
Page
MERAJ ENGINEERING
Solution For Metal Industry
BULL BLOCK
Meraj Bull Block - Main body with base, drawing drum and drawing die box
of close grain Cast Iron
Water cooling arrangement provided inside the Drawing Drum and the Die
Box
Phosphorous bronze gears with high carbon axle steel worms Suitable for
making Nail Wire from 8 mm or 6 mm input rods up to 2 mm
Also suitable for making Wire used to make Barbed Wire, Wire Mesh, etc.
Wet / Slip type Fine Wire Drawing Machine also available - Details on
request
Technical Specification :
Capacity : Tube 20mm to 1mm Dia
DEBURRING
Meraj Deburring machine mainly used to deburr and chamfer kinds of round
tubes and rods.
Deburring is the first step in tube preparation after the tube is cut.
Deburring a tube includes squaring the end of the tube concentric to the
inner and outer edges of the tube.
Deburring is an essential step in any tube fabrication.
FUNCTIONS:
1. The tube diameter and length can be adjustable
2. Deburr tube ends by high-speed wire wheel
3. Easy to operate, high efficiency, good quality
Techincal Specification
Capacity : 2” to 50mm &
50mm to 6mm
19
Page
MERAJ ENGINEERING
Solution For Metal Industry
HYDRO TESTING
MERAJ Hydro Testing Machine is used to test the tube through pressure.
FEATURE :
SEAL HOLDER FRONT ANF BACK MOVEMENT THROUGHT MOTORISED
MECHANISM.FRONT AND BACK MOVERMENT CONTROLLED WITH
ELECTRICAL LIMIT SWITCH.
STRECHER
STRAIGHTENING IT.
FUNCTION :
ACCURACY
21
Page
MERAJ ENGINEERING
Solution For Metal Industry
Weight(ton) 8 15 35 22 50 80 100
Page
MERAJ ENGINEERING
Solution For Metal Industry
Copper rod by the release, the straightening directly into the continuous
extrusion machine, after extruding to strip products, at this time product
have high temperatures, so in the exit of extrusion machine have an anti-
oxidation plant and cooling system, through meter calculator plant and
other equipment of the production line producing copper strip.
The process is simple, low investment and production site of small, saving
energy and labor, the low cost of production, manufacturers welcomed.
23
Page
MERAJ ENGINEERING
Solution For Metal Industry
BASIC CONFIGURATION
Feedstock payoff
Feedstock straighten unit
Feeding cut device
Hydraulic and lubricate system
Continuous extrusion machine
Cooling system (including the anti-oxidation system)
Take up regulate plant
Take up stand
Electric control system
Bailing press
FEATURES
26
Page
MERAJ ENGINEERING
Solution For Metal Industry
There are two basic extrusion processes , Direct extrusion and indirect
extrusion. Direct extrusion is by far the most widely used process. Indirect
extrusion more efficient and produced higher quality products.
27
Page
MERAJ ENGINEERING
Solution For Metal Industry
All metals and alloys can be extruded. Extrusions can be solid or hollow.
Extrusions can be tapered or stepped by manupulating the die during the
extrusion process.
EQUIPMENT/ PROCESS
EXTRUSION PRESS
Contact Details :
L – 6129/2, 4th PHASE, GIDC, VAPI,
GUJARAT, INDIA
9824132776 / 9725777899
EMAIL merajengineering@gmail.com
merajengineering@in.com
WEB www.merajengineering.com
NOTE:-
The manufacturer always performs product improvements to achieve
the best possible. All specifications, dimensions and design
characteristics shown in this catalogue are subject to change without
notice. (Products specifications are based on the actual machines)
29
Page