CHEMISTRY

________________ pBLOCK ELEMENTS (BORON AND CARBON FAMILY)

Introduction :
Group 13 to 18 of the periodic table of elements constitute the pblock. The pblock contains metals,
metalloids as well as nonmetals.
The pblock elements have general valence shell electronic configuration ns2 np16.
The first member of each group from 1317 of the pblock elements differ in many respects from the other
members of their respective groups because of small size, high electronegativity and absence of dorbitals.
The first member of a group also has greater ability to form pp multiple bonds to itself (e.g. C=C, CC, NN)
and to element of second row (e.g C=O, C=N, CN, N=O) compared to the other members of the same group.
The highest oxidation state of pblock element is equal to the group number minus 10. Moving down the
group, the oxidation state two less than the highest group oxidation state and becomes more stable in
groups 13 to 16 due to inert pair effect (reluctance of s-subshell electrons to participate in chemical bonding)

GROUP 13 ELEMENTS : THE BORON FAMILY

Boron is a typical non-metal, aluminium is a metal but shows many chemical similarities to boron, and
gallium, indium and thallium are almost exclusively metallic in character,
Electronic Configuration :
The valence shell electronic configuration of these elements is ns2 np1.
Atomic Radii :
On moving down the group, for each successive member one extra shell of electrons is added and therefore,
atomic radius is expected to increase. Atomic radius of Ga is less than that of Al. The presence of additional
10 d-electrons offer only poor screening effect for the outer electrons from the increased nuclear charge in
gallium. Consequently, the atomic radius of gallium (135 pm) is less than that of aluminium (143 pm).
Ionization Enthalpy :
The ionisation enthalpy values do not decrease smoothly down the group. The decreases from B to Al is
associated with increases in size. The observed discontinuity in the ionisation enthalpy values between Al
and Ga and between In and TI are due to the non-availability of d- and f-electrons, which have low screening
effect, to compensate the increase in nuclear charge. The sum of the first three ionisation enthalpies for each
of the elements is very high .
Electronegativity :
Down the group, electronegativity first decreases from B to Al and then increases marginally. This is because
of the discrepancies in atomic size of the elements.

Physical Properties :
Boron is non-metallic in nature . It is extremely hard and black coloured solid. It exists in many allotropic
forms. Due to very strong crystalline lattice, boron has unusually high melting point. Rest of the member are
soft metals with low melting point and high electrical conductivity. Gallium with low melting point (303 K),
could exist in liquid state during summer. Its high boiling point (2676 K) makes it a useful material for
measuring high temperatures. Density of the elements increases down the group from boron to thallium.

(Table No. 1) Atomic and physical properties :

Element
Atomic Number
Atomic Mass

Al

Ga

In

Tl

13

31

49

81

10.81
2

Electronic configuration
Atomic Radius / pm
Ionic Radius M

3+

/ pm

Ionization enthalpy
(kJ mol1)

26.98
1

69.72
1

10

[Ar] 3d

114.82
2

4s 4p

[Kr] 4d

10

204.38
1

5s 5p

[Xe] 4f

14

5d10 6s26p1

[He] 2s 2p

[Ne] 3s 3p

85

143

135

167

170

27

53.5

62

80

88.5

iH 1

801

577

579

558

589

iH 2

2427

1816

1979

1820

1971

iH 3

3659

2744

2962

2704

2877

Electronegativity

2.0

1.5

1.6

1.7

1.8

2.35

2.70

5.90

7.31

11.85

Melting point / K

2453

933

303

430

576

Boiling point / K

3923

2740

2676

2353

1730

Density/[g cm

( at 293 K)]

"manishkumarphysics.in"

CHEMISTRY
Chemical Properties :
Oxidation state and trends in chemical reactivity
Due to small size of boron, the sum of its first three ionization enthalpies is very high. This prevents it to form
+ 3 ions and compel it to form only covalent compounds. But as we move from B to Al, the sum of the first
three ionisation enthalpies of Al considerably decreases, and is therefore able to form Al3+ ions. However,
down the group, due to poor shielding, effective nuclear charge holds ns electrons tightly (responsible for
inert pair effect) and thereby, restricting their participation in bonding. As a result of this only p-orbital electron
may be involved in bonding. In fact in Ga, In and Tl, both + 1 and + 3 oxidations states are observed. The
relative stability of + 1 oxidation state progressively increases for heavier elements: Al < Ga < In < Tl. In
thallium +1 oxidation state is predominant and + 3 oxidation state highly oxidising in character. The compound
in +1 oxidation state, as expected from energy considerations, are more ionic than those in + 3 oxidations
state.
In trivalent state, the number of electrons around the central atom in a molecule of the compounds of these
elements (e.g., boron in BF3) will be only six. Such electron deficient molecules have tendency to accept
a pair of electrons to achieve stable electronic configuration and thus, behave as Lewis acids. The tendency
to behave as Lewis acid decreases with the increases in the size down the group. BCl3 easily accepts a lone
pair of electrons from ammonia to form BCl3. NH3. In trivalent state most of the compounds being covalent are
hydrolysed in water. The trichloride on hydrolysis in water form tetrahedral [ M (OH)4] species; Aluminium
chloride in acidified aqueous solution form octahedral [ Al(H2O)6]3+ ion. AIX3 (X = Cl, Br) exists as dimer in
vapour state (at lower temperature) and in non-polar solvent like benzene. However, when the halides dissolved
in water, the high enthalpy of hydration is sufficient to break the covalent dimer into [M.6H2O]3+ and 3X ions.
(i)

Reactivity towards air :

Boron is unreactive in crystalline form. Aluminium forms a very thin oxide layer on the surface which protects
the metal from further attack. Amorphous boron and aluminium metal on heating in air form B2O3 and Al2O3
respectively. With dinitrogen at high temperature they form nitrides.

2E(s) + 3 O2 (g) 2 E2O3(s) ; 2E(s) + N2(g) 2 EN (s).

The nature of these oxides varies down the group. Boron trioxide is acidic and reacts with basic (metallic)
oxides forming metal borates. Aluminium and gallium oxides are amphoteric and those of indium and thallium
are basic in their properties.
(ii)

Reactivity towards acids and alkalies :

Boron does not react with acids and alkalies even at moderate temperature; but aluminium dissolves in
mineral acids and aqueous alkalies and thus shows amphoteric character.
Aluminium dissolved in dilute HCl and liberates dihydrogen. However, concentrated nitric acid renders aluminium
passive by forming protective oxide layer on the surface . Aluminium also reacts with aqueous alkali and
liberates dihydrogen .
2 Al(s) + 6 HCl(aq) 2 Al3+ (aq) + 6 Cl(aq) + 3 H2(g)
2Al(s) + 2NaOH (aq) + 6H2O () 2Na+ [Al(OH)4] (aq) + 3H2(g)
Sodium tetrahydroxoaluminate (III)

Al(OH)3 is amphoteric and reacts principally as a base. However, Al(OH)3 shows some acidic properties
when it dissolves in NaOH forming aluminate. The Al(OH)3 is reprecipitated by the addition of CO2, showing
that the acidic properties are very weak.
CO2 + H2O H2CO3
CO32 + 2H+ ; 2Al3+ + 3CO32 + 3H2O 2Al(OH)3 + 3CO2
In concentrated solutions above 1.5 M and pH greater than 13, it exists as dimer [(OH)3AlOAl(OH)3]2.

Aluminates are important constituents of portland cement.

Ga2O3 and Ga(OH)3 are both amphoteric compounds. Tl2O3 and ln2O3 are completely basic and form neither
hydrates nor hydroxides.

(iii)

Reactivity towards halogens :

These elements react with halogen to form trihalides (except Tl I3 )..
2E(s) + 3X2 (g) 2EX3 (s)
(X = F, Cl Br, I)

"manishkumarphysics.in"

CHEMISTRY
IMPORTANT TRENDS AND ANOMALOUS PROPERTIES OF BORON
The tri-chlorides, bromides and iodides of all these elements being covalent in nature are hydrolysed in
water. Species like tetrahedral [M(OH)4] and octahedral [M(H2O)6]3+, except in boron, exist in aqueous
medium. It is due to the absence of d orbitals that the maximum covalence of boron is 4. Since the d-orbitals
are available with Al and other elements, the maximum covalence can be expected beyond 4.

BORON (B) :
Occurrence :
(i)
(iii)

Boron occurs in nature in the form of the following minerals:

Borax (Na+)2B4O72- .10H2O. (boron is part of an anionic complex), (ii) Boric acid H3BO3,
Kernite Na2B4O7.4H2O & (iv) Colemanite Ca2 B6O11. 5H2O

(i)

By the reduction of B2O3 with magnesium, sodium or potassium in the absence of air :

Extraction of Boron :
Na2B4O7 + 2HCl + 5H2O 4H3BO3 + 2NaCl

High temp.
2H3BO3
B2O3 + 3H2O ; B2O3 + 3Mg / Na
2B + 3MgO / Na2O
The product thus obtained is boiled with HCl and filtered when Na2O or MgO dissolves leaving behind elemental
boron. It is thoroughly washed to remove HCl and then dried finally.
It is 95-98% pure (contains impurities of metal borides)

(ii)

From potassium fluoroborate (KBF4) by heating it with potassium metal.

KBF4 + 3K
4KF + B.
It is then treated with dilute HCl to remove KF and B is then washed and dried.

(iii)

It is difficult to obtain pure crystalline boron due to very high melting point and the liquid is corrosive. Small
amount of crystalline boron may be obtained by the following reactions.
red hot W

(a)

2BX3 + 3H2 2B + 6HX

(b)

2Bl3 2B + 3I2

(c)

B2H6
2B + 3H2

or Tantalum

red hot W

(X = Cl or Br)
(Van Arkel method).

or Tantalum

(iv)

2BCI3 + 3Zn 3ZnCl2 + 2B

(i)

(ii)

It exists in five forms, four of which are crystalline and one is amorphous. All crystalline forms are very hard
made up of clusters of B12 units. All crystalline forms are black in appearance and chemically inert. However,
it is attacked at high temperature by strong oxidising agents such as a mixture of hot concentrated H2SO4
and HNO3 or Na2O2. But amorphous form is brown and chemically active.
Reaction with air : Burns in air or oxygen forming B2O3.
4B + 3O2 2B2O3
Also burns in nitrogen at white heat.
High temperatur e, pressure
2B + N2 2BN ; BN + 3H2O H3BO3 + NH3

(iii)

Action of alkalies and acids :

Properties :

2B + 2NaOH + 2H2O 2NaBO2 + 3H2

fused

2Na3BO3 + 3H2
2B + 6NaOH
2B + 3H2SO4 (hot & concentrated) 2H3BO3 + 3SO2
2B + 6HNO3 (hot & concentrated) 2H3BO3 + 6NO2
(iv)

Reaction with Mg and Ca :

3Mg + 2B Mg3B2 ;

3Ca + 2B Ca3B2

Mg3B2 on consequent hydrolysis gives diborane.

hydrolysis
3MgCl2 + B2H6 ;
Mg3B2 + 6HCl

B2H6 + 6H2O 2H3BO3 + 6H2

"manishkumarphysics.in"

CHEMISTRY
(v)

Reducing properties :
3SiO2 + 4B 2B2O3 + 3Si
3CO2 + 4B 2B2O3 + 3C

(vi)

It decomposes steam liberating hydrogen gas.

2B + 3H2O(steam) B2O3 + 3H2

1.

Boron is used in the construction of high impact-resistant steel and, since it absorbs neutrons, in reactor
rods for controlling atomic reactions.
Boron carbide is used as an abrasive.

Uses :

2.

Example-1

Write the chemical equations involved in the preparation of elemental boron from mineral colemanite.
Ca2B6O11 + 4SO2 + 11H2O 2Ca(HSO3)2 + 6H3BO3

Solution

2H3BO3
B2O3 + 3H2O ;

B2O3 + 2Al Al2O3 + 2B

COMPOUNDS OF BORON :
BORON TRIOXIDE (B2O3) :
Preparation :

Properties :
It is a acidic oxide and is anhydride of boric acid and it reacts with alkalies or bases to form borates.
3Na2O + B2O3 2Na3BO3 (sodium orthoborate).
It reacts with water slowly to form orthoboric acid.
H2O + B2O3 2HBO2 ;
HBO2 + H2O H3BO3
When heated with transition metal salts, it forms coloured compounds.

3B2O3 + Cr2(SO4)3
3SO3 + 2Cr(BO2)3(green)

2B2O3 + 2Cu(NO3)2 4NO2 + O2 + 2Cu(BO2)2 (blue)

It also shows weakly basic properties according to the following reaction.
B2O3 + P2O5
2BPO4
It reacts with hydrogen fluoride in presence of H2SO4 forming BF3 .
B2O3 + 6HF + 3H2SO4 2BF3 + 3H2SO4 . H2O.

ORTHOBORIC ACID (H3BO3) :

Preparation :
(i)

It is precipitated by treating a concentrated solution of borax with sulphuric acid.

Na2B4O7 + H2SO4 + 5H2O Na2SO4 + 4H3BO3

(ii)

From Colemanite: Powdered colemanite is suspended in water and excess SO2 is passed through it. On
filtering and cooling the filtrate, white crystals of H3BO3 are obtained.
Ca2B6O11 + 4SO2 + 11H2O 2Ca(HSO3)2 + 6H3 BO3

Properties:
It is a weak monobasic acid soluble in water and in aqueous solution the boron atom completes its octet by
accepting OH from water molecules:
B(OH)3(aq) + 2H2O()
[B(OH)4] (aq) + H3O+(aq).
pK = 9.25.
It, therefore, functions as a Lewis acid and not as a proton donor like most acids.

"manishkumarphysics.in"

CHEMISTRY
Since B(OH)3 only partially reacts with water to form H3O + and [B(OH)4], it behaves as a weak acid. Thus
H3BO3 can not be titrated satisfactorily with NaOH as a sharp end point is not obtained. If certain organic
polyhydroxy compounds such as glycerol, mannitol or sugars are added to the titration mixture, then B(OH)3
behaves as a strong monobasic acid and it can be now titrated with NaOH and the end point is detected
using phenolphthalein as indicator (pH = 8.3 - 10.0).
The added compound must be a cis-diol, to enhance the acid properties. The cis-diol forms very stable
complex with the [B(OH)4], thus removing it from solution. The reaction is reversible and thus removal of one
of the products shifts the equilibrium in the forward direction and thus all the B(OH)3 reacts with NaOH; in
effect it acts as a strong acid in the presence of the cis-diol.
B(OH)3 + NaOH Na[B(OH)4] + NaBO2 + 2H2O

+ H+ + 4H2O

HB(OH)4 + 2

Ethanol does not form similar complex but catechol, salicylic acids, mannitol form similar complexes.

When heated it first forms metaboric acid (HBO2) and then boron trioxide.

Orthoboric acid is greasy to touch less soluble in cold water but more soluble in hot water. In the solid state,
the B(OH)3 units are hydrogen bonded together in to two dimensional sheets with almost hexagonal symmetry.
The layered are quite a large distance apart (3.18 ) and thus the crystal breaks quite easily into very fine
particles.

Figure : 1
Polymeric metaborate species are formed at higher concentration, for example,
3B(OH)3

H3O+ + [B3O3(OH)4] + H2O,

pK = 6.84

"manishkumarphysics.in"

CHEMISTRY

Boric acid dissolves in aqueous HF forming HBF4 (fluoroboric acid).

B(OH)3 + 4HF
H3O+ + BF4 + 2H2O

Test for Borate radical :

When boric acid is heated with ethyl alcohol, the evolved gas is burned forming a green edged flame.
H3BO3 + 3C2H5OH B(OC2H5)3 + 3H2O
ethyl borate (volatile)

Uses :
1.
2.

It is an antiseptic and its water solution is used as an eyewash.

It is also used in glass, enamel and pottery industry.

Example-2
Solution

It has been observed that BF3 does not hydrolyses completely whereas BCl3 or BBr3 get easily
hydrolysed to form B(OH)3 and HX ? Explain.
The more stability of BF bond as compared to BCl and BBr bonds is due to additional bonding
in BF bonds of BF3 molecules and it gives extra stability to its adduct with water than other boron
halides. The BCl and BBr bonds are relatively weak and are easily cleaved by water forming
strong BOH bonds instead of stable addition product (BF3.OH2) formed by BF3.

BORAX (Na2B4O7.10H2O) :
Preparation :
(i)

It is found in nature but can also be prepared by the following methods.

From Colemanite.
When colemanite powder is heated with Na2CO3 solution, the following reaction occurs with the precipitation
of CaCO3.
Ca2B6O11 + 2Na2CO3 2CaCO3 + Na2B4O7 + 2NaBO2
The filtrate is cooled when white crystals of borax are precipitated. The mother liquor on treatment with CO2
converts NaBO2 to Na2B4O7 which precipitates out on crystallization.
4NaBO2 + CO2 Na2B4O7 + Na2CO3

(ii)

From orthoboric acid.

Borax is obtained by the action of Na2CO3 on orthoboric acid.
4H3BO3 + Na2CO3 Na2B4O7 + 6H2O + CO2

(i)
(ii)

Borax is a white powder, less soluble in cold water, more soluble in hot water.
Its aqueous solution is alkaline because of its hydrolysis to weak acid H3BO3 and strong alkali NaOH.
Na2B4O7 + 7H2O 4H3BO3 + 2NaOH
Action of heat.
When borax powder is heated, it first swells due to loss of water in the form of steam but at 740oC it becomes
converted into colourless transparent borax bead.

Na2B4O7.10H2O Na2B4O7 + 10 H2O

740 C
Na2B4O7

2NaBO2 + B2O3 (borax bead)

Oxidation of boric acid or sodium metaborate with H2O2.

Na2B4O7 2NaBO2 + 2H2O2 + 6H2O Na2 [(OH)2B (OO)2B(OH)2].6H2O

Sodium per oxoborate is used as a brightner in washing powder. In very hot water (over 80C) the peroxide
linkages OO break down to give H2O2.
It is a useful primary standard for titrating against acids. One mole of it reacts with two moles of acid. This is
because when borax is dissolved in water both B(OH)3 and [B(OH)4] are formed, but only the [B(OH)4]
reacts with HCl.
[B4O5(OH)4]2 + 5H2O
2B(OH)3 (weak acid) + 2[B(OH)4] (salt)
2[B(OH)4]2 + 2H3O+ 2B(OH)3 + 4H2O
On cooling, the white flakes of boric acid are obtained

Borax is also used as a buffer since its aqueous solution contain equal amounts of week acid and its
salt.

Properties :

(iii)

(iv)

(v)

"manishkumarphysics.in"

CHEMISTRY
(vi)

H2O
H2SO4
Na2[B4O5(OH)4] + 12HF

[Na2O(BF3)4]

4BF3 + 2NaHSO4 + H2O

Correct formula of borax is Na2[B4O5(OH)4] . 8H2O. It contains boron in both planar BO3 and tetrahedral
BO4 units. It contains five BOB linkages.

Borax-bead test :
Borax reacts with certain metal salts such as, Ni2+, Co2+, Cr3+, Cu2+, Mn2+ etc. to form coloured metaborates.
The colour of the metaborates can be used to identify the metallic ions (cations) in salts.

740 C

Na2B4O710H2O
Na2B4O7

2NaBO 2 B 2O 3 ; CuO + B2O3 Cu(BO2)2 (blue bead)

10H2O

glassy mass

Uses : It is used
1. in borax bead test, 2. in purifying gold, 3. as flux during welding of metals and 4. in production of glass.

Example-3

(i ) C H OH

(a)

2
5
Na2B4O7 + concentrated H2SO4 + H2O (A)
(B)

(b)

(B) is identified by the characteristic colour of the flame. Identify (A) and (B).
Complete the following reaction and identify the products formed.

(ii ) ignite

Na2B4O7
(A)
(B )

Solution

(a)

Na2B4O7 + concentrated H2SO4 + 5H2O Na2SO4 + 4H3BO3

H3BO3 + 3C2H5OH B(OC2H5)3-volatile (burn with green edged flame) + 3H2O

(b)

Na2B4O7 B2O3
(NaBO 2 )

DIBORANE (B2H6) :
Binary compounds of B with H are called boron hydrides or boranes. These compounds form following two
types of series :
BnHn+4 - B2H6, B5H9, B6H10, B10H14
BnHn+6 - B4H10, B5H11, B6H12, B9H15
The chemistry of diborane has aroused considerable interest because of its usefulness in many synthetic
reactions and also because the elucidation of its structure helped to clarify the basic concepts about the
structure of electron deficient compounds.

Preparation :
(i)

ether
4BF3 + 3LiAlH4
2B2H6 + 3Li [AlF4]

(ii)

silent electric
B2H6 + 6HCl
2BCl3 + 6H2 (excess)

(iii)

ether
8BF3 + 6LiH B2H6 + 6LiBF4

(iv)

ether
2NaBH4 + 2 B2H6 + 2Na + H2

(v)

ether
3NaBH4 + 4BF3 3NaBF4 + 2B2H6

(vi)

It can also be prepared by treating NaBH4 with concentrated H2SO4 or H3PO4.

disch arg e

450 K

2NaBH4 + H2SO4 B2H6 + 2H2 + Na2SO4 ;

2NaBH4 + 2H3PO4 B2H6 + 2H2 + 2NaH2PO4

"manishkumarphysics.in"

CHEMISTRY
(vii)

453 K
2BF3 + 6NaH

B2H6 + 6NaF (Industrial method)

(viii)

B2H6 + Al2O3
B2O3 + 3H2 + 2Al

(ix)

Mg3B2H + H3PO4 mixture of boranes mainly, B4H10 B2H6.

(i)

B2H6 is colourless gas and highly reactive (boiling point 183 K).

(ii)

Controlled pyrolysis of diborane leads to most of the higher boranes.

It catches fire spontaneously in air and explodes with O2. Reaction with oxygen is extremely exothermic.
B2H6 + 3O2 B2O3 + 3H2O
H = 2160 kJ mol1

750 atm
150 C

Properties :

(iii)

Mixtures of diborane with air or oxygen inflame spontaneously producing large amount of heat.
Diborane has a higher heat of combustion per unit weight of fuel than most other fuels. It is therefore
used as a rocket fuel.

At red-heat the boranes decomposes to boron and hydrogen.

Reaction with water is instantaneous.

B2H6 + 6H2O 2B(OH)3 + 6H2
Dibroane is also hydrolysed by weaker acids (e.g. alcohols) or aqueous alkali.
B2H6 + 6ROH 2B(OR)3 + 6H2
B2H6 + 2KOH + 2H2O 2KBO2 + 6H2

(iv)

Reaction with HCl replaces a terminal H with Cl.

B2H6 + HCl B2H5Cl + H2

(v)

Reaction with chlorine gives the trichloride.

B2H6 + 6Cl2 2BCl3 + 6HCl

(vi)

The electron deficient 3c-2e BHB bridges are sites of nucleophilic attack.

Small amines such as NH3, CH3NH2 and (CH3)2NH give unsymmetrical cleavage of diborane.
B2H6 + 2NH3 [H2B (NH3)2]+ + [BH4]

Large amines such as (CH3)3N and pyridine give symmetrical cleavage of diborane.
2(CH3)3N + B2H6 2H3B N(CH3)3
B2H6 + 2Me3P 2Me3PBH3
200C, 20 atm

2BH3CO (borane carbonyl)

B2H6 + 2CO
The boronium ion products [H2BL2]+, are tetrahedral and can undergo substitution by other bases
[H2B(NH3)2]+ + 2PR3 [H2B(PR3)2]+ + 2NH3

The reaction with ammonia depends on conditions.

Excess NH

B2H6 + NH3 3 B2H6 . 2NH3 or [H2B(NH3)2]+ [BH4] (ionic compound).

low temperatur e
Excess NH

3 (BN)x boron nitride.

higher temperatur e ( 200 C )

Ratio 2NH : 1 B H

6
3 2
B3N3H6 borazine.

higher temperatur e ( 200 C)

Borazine is much more reactive than benzene. Borazine readily undergoes addition reactions which do not
occur with benzene. Borazine also decomposes slowly and may be hydrolysed to NH3 and boric acid at
elevated temperature. If heated with water, B3N3H6 hydrolyses slowly.
B3N3H6 + 9H2O 3NH3 + 3H3BO3 + 3H2O
(vii)

Reduction of diborane can be accomplished with sodium or with sodium borohydride.

2B2H6 + 2Na NaBH4 + NaB3H8
B2H6 + NaBH4 NaB3H8 + H2.

"manishkumarphysics.in"

CHEMISTRY

(viii)

Reductions of diborane with NaBH4 can also lead to higher borane anions.
2NaBH4 + 5B2H6 Na2B12H12

B2H6 + 2LiH 2LiBH4

Example-4

Complete the following reactions and identify the products formed.

140 C
NaBH 4
(A)
(a) BCl3 + NH4Cl
(B)
C6H5Cl

1700 1800 C
(b) BCl3 + H2 + Cfibre product(s)

Solution

140 C
NaBH 4
B N H Cl
(a) 3BCl3 + 3NH4Cl CH
B3N3H6 (borazine)
3 3 3
3
Cl
6 5

1700 1800 C
(b) 4BCl3 + 6H2 + Cfibre B4C(fibre) + 12 HCl

ALUMINIUM (Al) :
(i)

It is a silvery metal with a density of 2.7 g/cc, having a melting point of 660oC, and is a good conductor of heat
and electricity. It is malleable and ductile.

(ii)

Action of air: Dry air has no action on aluminium. But moist air forms a thin layer of Al2O3 on its surface and
it loses its luster. At very high temperatures it burns to form Al2O3 and AlN.

(iii)

Reaction with halogens : When gaseous halogens are passed over aluminium, its halide are formed in an
anhydrous form. 2Al + 3Cl2 2AlCl3

(iv)

Action of alkalies: When warmed with concentrated NaOH, it liberates H2 gas and a colourless solution of
sodium meta-aluminate is formed.
2Al + 2NaOH + 2H2O 2NaAlO2 + 3H2

(v)

Action of acids: Aluminium reacts with dilute H2SO4 and dilute HCl but concentrated HNO3 does not react
with aluminium because aluminium becomes passive by the action of concentrated HNO3 forming a protective
oxide layer on the surface.
2Al + 3H2SO4 Al2(SO4)3 + 3H2 2Al + 6HCl 2AlCl3 + 3H2

(vi)

Reaction with N2 : When N2 gas is passed over heated aluminium, aluminium nitride is formed. Hot aluminium
thus acts as an absorbing agent for N2.
2Al + N2 2AlN
AlN reacts with hot water to form Al(OH)3 and NH3

(vii)

Reaction with water: Aluminium does not react with cold water. It is very slowly attacked by boiling water or
steam.
2Al + 6H2O 2Al(OH)3 + 3H2

(viii)

Reduction of oxides of metals : When oxides of less reactive metal than aluminium is heated with aluminium,
the other metal is liberated.

3MnO2 + 4Al
2Al2O3 + 3Mn;
Cr2O3 + 2Al
Al2O3 + 2Cr

Uses :
1.
2.
3.
4.

It is extensively used :
for manufacture of cooking and household utensils.
as aluminium plating for tanks, pipes, iron bars and other steel objects to prevent corrosion.
for manufacture of aluminium cables.
for making precision instruments, surgical apparatus, aircraft bodies, rail coaches, motorboats, car.

"manishkumarphysics.in"

CHEMISTRY
COMPOUNDS OF ALUMINIUM :
ALUMINIUM OXIDE (Al2O3) :
It is also called alumina. It occurs in nature in the form of bauxite and corundum. It is also found in the form
of gems. Some important aluminium oxide gems are :
(A) Oriental Topaz-yellow (Fe3+),
(B) Sapphire-blue (Fe2+ / 3+ / Ti4+),
3+
(C) Ruby-red (Cr ),
(D) Oriental Emerald-green (Cr3+ / V3+)

Preparation :
Pure Al2O3 is obtained by igniting Al2(SO4)3, Al(OH)3 or ammonium alum.

Al2(SO4)3
Al2O3 + 3SO3 ;

2Al(OH)3
Al2O3 + 3H2O

(NH4)2SO4.Al2(SO4)3.24H2O
2NH3 + Al2O3 + 4SO2 + 25H2O

Properties :
It is a white amorphous powder insoluble in water but soluble in acids (forming eg., AlCl3) as well as alkalies
(forming e.g., NaAlO2), Thus amphoteric in nature. It is a polar covalent compound. Exists in two forms Al2O3 or corundum and -Al2O3.
Addition of Cr2O3 or Fe2O3 makes alumina coloured.
1000 C

-Al2O3 -Al2O3

Uses :
1.
2.
3.
4.
5.
6.
7.

It is used for the extraction of aluminium.

It is used for making artificial gems.
It is used for the preparation of compounds of aluminium.
-Al2O3 is used in making furnace linings. It is a refractory material.
It is used as a catalyst in organic reactions.
Corundum is extremely hard and is used as Jewellers rouge to polish glass.
-Al2O3 dissolves in acids absorbs moisture and is used in chromatography.

Example-5

What will happen if aluminium is heated with coke in an atmosphere of nitrogen ?

Solution

Al2O3 + N2 + 3C
2AlN + 3CO

ALUMINIUM CHLORIDE (AlCl3.6H2O) :

It is a colourless crystalline solid, soluble in water. It is covalent. Anhydrous AlCl3 is a deliquescent white solid.

Preparation :
(i)

(ii)
(iii)

By dissolving aluminium, Al2O3, or Al(OH)3 in dilute HCl :

2Al + 6HCl 2AlCl3 + 3H2 Al2O3 + 6HCl 2AlCl3 + 3H2O; Al(OH)3 + 3HCl AlCl3 + 3H2O
The solution obtained is filtered and crystallized when the crystals of AlCl3.6H2O are obtained.
Anhydrous AlCl3 is obtained by the action of Cl2 on heated aluminium.
By heating a mixture of Al2O3 and coke and passing chlorine over it.
Al2O3 + 3C + 3Cl2 2AlCl3 (anhydrous) + 3CO

Properties :
(i)

Action of heat : Hydrated salt when heated strongly is converted to Al2O3.

2AlCl3.6H2O
Al2O3 + 6HCl + 3H2O

(ii)

Action of moisture on anhydrous AlCl3 : When exposed to air, anhydrous AlCl3 produces white fumes of HCl
AlCl3 + 3H2O

(iii)

Al(OH)3 + 3HCl

Action of NH3 : Anhydrous AlCl3 absorbs NH3 since the former is a Lewis acid.
AlCl3 + 6NH3 AlCl3.6NH3 (white solid)

"manishkumarphysics.in"

10

CHEMISTRY
(iv)

(v)

(vi)

Action of NaOH solution : When NaOH solution is added dropwise to an aqueous AlCl3 solution, a gelatinous
precipitate of Al(OH)3 is first formed which dissolves in excess of NaOH solution to give a colourless solution
of sodium meta-aluminate.
AlCl3 + 3NaOH Al(OH)3 + 3NaCl ;
Al(OH)3 + NaOH NaAlO2 + 2H2O
This reaction is important as a test to distinguish between an aluminium salt from salts of Mg, Ca, Sr, and
Ba. (When NaOH solution is added to their salt solutions, a white precipitate of hydroxide forms which does
not dissolve in excess of NaOH).
Action of NH4OH solution : When NH4OH solution is added to a solution of AlCl3, a white precipitate of
Al(OH)3 is formed which does not dissolve in excess of NH4OH.
AlCl3 + 3NH4OH Al(OH)3 (white gelatinous) + 3NH4Cl
This reaction is important as a test to distinguish an Al salt from a Zn salt. (With a Zn salt a white precipitate
of Zn(OH)2 is formed which dissolves in excess of NH4OH solution).
Hydrolysis with water : When AlCl3 is dissolved in water, it undergoes hydrolysis rapidly to produce Al(OH)3
which is a weak base and HCl which is a strong acid. Hence the solution is acidic to litmus.
[Al(H2O)6]3+
[Al(H2O)5OH]+2 + H+
The complex cation has a high tendency to get dimerised.
2[Al(H2O)5OH]2+ [(H2O)4

(vii)

4LiH + AlCl3 LiAlH4 + 3LiCl

1.
2.
3.

Uses : It is used
as catalyst for cracking of petroleum.
as catalyst in Friedel-Crafts reactions.
for preparing aluminium compounds.

Example-6

Solution

Example-7
Solution

(H2O)4 ]+4 + 2H2O

What happens when :

(write chemical equations only)
(a) Anhydrous AlCl3 is exposed to atmosphere.
(b) AlCl3 dissolves in aqueous sodium hydroxide (excess)
(a) AlCl3 + H2O Al(OH)3 + HCl - HCl fumes in air..
(b) AlCl3 + 3NaOH Al(OH)3 + 3NaCl
Al(OH)3 + OH [Al(OH)4] + 3NaCl
Anhydrous AlCl3 can not be prepared by heating hydrated salt. Why ?
Gets hydrolysed forming Al2O3.

2AlCl3.6H2O
Al2O3 + 6HCl + 3H2O

ALUMS ; M2SO4. M2 (SO4)3. 24H2O or MM (SO4)2. 12H2O

Alums are transparent crystalline solids having the above general formula where M is almost any univalent
positive cation (except Li+ because this ion is too small to meet the structural requirements of the crystal)
and M is a trivalent positive cation (Al3+, Ti3+, V3+, Cr3+, Fe3+, Mn3+, Co3+, Ga3+ etc.). Alums contain the ions
[M(H2O)6]+, [M(H2O)6]3+ and SO42 in the ratio 1 : 1 : 2. Some important alums are :
(i)
Potash alum K2SO4 . Al2(SO4)3 . 24H2O
(ii)
Chrome alum K2SO4 . Cr2(SO4)3 . 24H2O
(iii)
Ferric alum K2SO4 . Fe2(SO4)3. 24H2O
(iv)
Ammonium alum (NH4)2SO4 . Al2(SO4)3 . 24H2O
Alums are double salts which when dissolved in water produce metal ions (or ammonium ions) and the
sulphate ions.

Preparation :
A mixture containing solutions of M2SO4 and M2(SO4)3 in 1 : 1 molar ratio is fused & then the resulting mass
is dissolved into water. From the solution thus obtained, alums are crystallised.
1.

2.
3.

Uses : It is used
As a mordant in dye industry. The fabric which is to be dyed is dipped in a solution of the alum and heated
with steam. Al(OH)3 obtained as hydrolysis product of [Al(H2O)6]3+ deposits into the fibres and then the dye
is absorbed on Al(OH)3.
as a germicide for water purification
As a coagulating agent for precipitating colloidal impurities from water.

"manishkumarphysics.in"

11

CHEMISTRY
Example-8
Solution

List the cations which are capable of replacing aluminium in alums ?

Cations of about the same size as that of Al3+ such as Ti3+, Cr+3, Mn+3, Fe3+ and Co3+ are capable
of replacing aluminium in alums.

GROUP 14 ELEMENTS : THE CARBON FAMILY

Carbon (C), silicon (Si), germanium (Ge), tin (Sn) and lead (Pb) are the members of group 14. Naturally
occurring carbon contains two stable isotopes: 12C and 13C. In addition to these third isotopes, 14C is also
presents , it is a radioactive isotope with half-life 5770 years and used for radiocarbon dating. Silicon is a
very important component of ceramics, glass and cement. Germanium exists only in traces. Tin occurs
mainly as cassiterite, SnO2 and lead as galena, PbS. Ultrapure form of germanium and silicon are used to
make transistors and semiconductor devices.
Electronic Configuration
The valence shell electronic configuration of these elements is ns2 np2.
Covalent Radius
There is a considerable increase in covalent radius from C to Si, thereafter from Si to Pb a small increase in
radius is observed. This is due to the presence of completely filled d and f orbitals in heavier members.
Ionization Enthalpy
The first ionization enthalpy of group 14 members is higher than the corresponding members of group 13.
The influence of inner core electron is visible here also. In general the ionisation enthalpy decreases down
the group. Small decreases in iH from Si to Ge to Sn and slight increase in iH from Sn to Pb is the
consequence of poor shielding effects of intervening d and forbitals and increase in size of the atom.
Electronegativity
Due to small size, the elements of this group are slightly more electronegative than group 13 elements. The
electronegativity value for elements from Si to Pb are almost the same. Carbon has higher electronegativity
as compared to other elements of the group. As a result it can accept electrons and can form negative ions
of type C22 in acetylides and C4 in methanides.

Physical Properties
All group 14 members are solids. Carbon and silicon are non-metals, germanium is metalloid whereas tin
and lead are soft metals with low melting points. Melting points and boiling points of group 14 elements are
much higher than those of corresponding elements of group 13 due to stronger metallic bonding.
(Table No. 2) Atomic and physical properties
Element
Atomic Number
Atomic Mass

Si

Ge

Sn

Pb

14

32

50

82

12.01

28.09

72.60

118.71

207.2

[He] 2s 2 2p2

Electronic configuration

[Ne] 3s 2 3p2 [Ar] 3d10 4s 2 4p2 [Kr] 4d10 5s2 5p2 [Xe] 4f14 5d10 6s 2 6p2

Atomic Radius / pm

77

118

122

140

146

Ionic Radius M+4 / pm

40

53

69

78

I H1

1086

786

761

708

715

I H2

2352

1577

1537

1411

1450

I H3

4620

3228

3300

2942

3081

Electronegativity

2.5

1.8

1.8

1.8

1.9

Melting point / K

4373

1693

1218

505

600

Boiling point / K

3550

3123

2896

2024

Ionization enthalpy
(kJ mol 1)

"manishkumarphysics.in"

12

CHEMISTRY
Chemical Properties

(i)

Oxidation states and trends in chemical reactivity

The group 14 elements have four electrons in outermost shell. The common oxidation states exhibited by
these elements are +4 and +2. Carbon also exhibits negative oxidation states. Since the sum of the first four
ionization enthalpies is very high, compound in +4 oxidation state are generally covalent in nature. In heavier
members the tendency to show +2 oxidation state increases in the sequence Ge < Sn < Pb. It is due to the
inability of ns2 electrons of valence shell to participate in bonding (inert pair effect). The relative stabilities of
these two oxidation states vary down the group. Carbon cannot exceed its covalence more than 4. Other
elements of the group can do so. It is because of the presence of d orbital in them. Due to this, their halides
undergo hydrolysis and have tendency to form complexes by accepting electron pairs from donor species.
For example, the species like SiF62 . [GeCl6]2, [Sn(OH)6]2 and [Pb(OH)6]2 exist in solutions as covalently
bonded complex ions.
Reactivity towards oxygen :
All members when heated in oxygen form oxides. There are mainly two types of oxides, i.e. monoxide and
dioxide of formula MO and MO2 respectively. SiO only exists at high temperature. Oxides in higher oxidation
states of elements are generally more acidic than those in lower oxidation state. The dioxides CO2, SiO2
and GeO2 are acidic, whereas SnO2 and PbO2 are amphoteric in nature. Among monoxides, CO is neutral,
GeO is distinctly acidic whereas SnO and PbO are amphoteric .

(ii)

Reactivity towards water :

Carbon , silicon and germanium are not affected by water . Tin decomposes steam to form dioxide and
dihydrogen gas. Lead is unaffected by water, probably because of a protective oxide film formation.

(iii)

Reactivity towards halogen :

These elements can form halides of formula MX2 and MX4 (where X = F, Cl Br, I). Except carbon all other
members react directly with halogen under suitable condition to make halides. Most of the MX4 are covalent
in nature. Exceptions are SnF4 and PbF4, which are ionic in nature . PbI4 does not exist because PbI bond
initially formed during the reaction does not release enough energy to unpair 6s2 electrons and excite one of
them to higher orbital to have four unpaired electrons around lead atom. Heavier members Ge to Pb are able
to make halides of formula MX2 . Stability of dihalides increases down the group. Except CCl4 other tetrachlorides
are easily hydrolysed by water because the central atom can accommodate the lone pair of electrons from
oxygen atom of water molecules in d orbital.

ANOMALOUS BEHAVIOUR OF CARBON :

Like first member of other groups, carbon also differs from rest of the members of its group. It is due to its
smaller size, higher electronegativity, higher ionisation enthalpy and unavailability of d orbitals.
Carbon accommodate only four pairs of electrons around it and thus this would limit the maximum covalence
to four whereas other members can expand their covalence due to the presence of d orbitals, Carbon also
has unique ability to form p-p multiple bonds with itself and with other atoms of small size and high
electronegativity. Few examples of multiple bonding are C = C, C C, C = O, C = S and C N. Heavier
elements do not form p-p bonds because their atomic orbital are too large and diffuse to have effective
overlapping.
Catenation :
Carbon atoms have the tendency to link with one another through covalent bonds to form chains and rings.
This property is called catenation. This is because CC bonds are very strong. Down the group the size
increases tendency to show catenation decreases. This can be clearly seen from bond enthalpies values.
The order of catenation is C > > Si > Ge Sn. Lead does not show catenation. Due to the property of
catenation and p-p bonds formation, carbon is able to show allotropic forms.
(Table No. 3)
Bond
CC
SiSi
GeGe
SnSn

Bond enthalpy (kJ mol1)

348
297
260
240

Allotropes of Carbon
Carbon exhibits many allotropic forms; both crystalline as well as amorphous. Diamond and graphite are two
well-known crystalline forms of carbon. In 1985 third form of carbon known as fullerenes was discovered by
H.W. Kroto, E Smalley and R.F.Curl.

"manishkumarphysics.in"

13

CHEMISTRY
Diamond :
It has a crystalline lattice. In diamond each carbon atom undergoes sp3 hybridisation and linked to four other
carbon atoms by using hybridised orbitals in tetrahedral manner. The CC bond length is 154 pm. The
structure extends in space and produces a rigid three dimensional network of carbon atoms. In this structure
directional covalent bonds are present throughout the lattice.
It is very difficult to break extended covalent bonding and therefore, diamond is a hardest substance on the
earth. It is used as an abrasive for sharpening hard tools in making dies (die casting) and in the manufacture
of tungsten filament for electric light bulbs.
Graphite :
Graphite has layered structure. Layers are held by van der Waals forces and distance between two layers is
340 pm. Each layer is composed of planar hexagonal rings of carbon atoms. C C bond length within the
layer is 141.5 pm. Each carbon atom in hexagonal ring undergoes sp2 hybridisation and make three sigma
bonds with three neighboring carbon atoms. Fourth electron forms a bond. The electrons are delocalised
over the whole sheet. Electrons are mobile and , therefore graphite conducts electricity along the sheet.
Graphite cleaves easily between the layers and therefore, it is very soft and slippery. For this reason graphite
is used as a dry lubricant in machines running at high temperature, where oil cannot be used as a lubricant.

Natural graphite is found as a mixture with mica, quartz and silicates which contains 10-60% carbon. It is
purified by heating with HCl and HF in a vacuum to remove the last traces of silicon compound as SiF4.
2500C

3C + SiO2
SiC + 2CO C(graphite) + Si(gas)

Fullerenes :
Fullerenes are made by the heating of graphite in an electrical arc in the presence of inert gases such as
helium or argon. Fullerenes are the only pure form of carbon because they have smooth structure without
having dangling bonds. Fullerene are cage like molecules. C60 molecule has a shape like soccer ball and
called Buckminsterfullerene.
It contains twenty six -membered rings and twelve five membered rings. A six membered ring is fused with
six or five membered rings but a five membered ring can only fuse with six membered rings. All the carbon
atoms are equal and they undergo sp2 hybridisation. Each carbon atom forms three sigma bonds with other
three carbon atoms. The remaining electron at each carbon atom is delocalised in molecular orbitals, which
in turn give aromatic character to molecule. This ball shaped molecule has 60 vertices and each one is
occupied by one carbon atom and it also contains both single and double bonds with C C distance of 143.5
pm and 138.3 pm respectively. Spherical fullerenes are called bucky balls in short. Carbon black is obtained
by burning hydrocarbons in a limited supply of air.

Graphite is thermodynamically most stable allotrope of carbon and, therefore, fH values of diamond and
fullerene, C60 are 1.90 and 38.1 kJ mol1, respectively.
Diamond is unaffected by halogens but graphite reacts with F2 at 500C forming intercalation compounds or
graphite fluoride (CF)n.
1600 C

Graphite synthetic diamond.

50000 60000 atms.

Diamond is unaffected by concentrated acids but graphite changes to Mellitic acid also called benzene
hexa-carboxylic acid with hot concentrated HNO3 and to graphite oxide with a hot concentrated HF/HNO3.

(Mellitic acid)

Si, Ge and Sn also have a diamond type of structure. Ge liquid expands when it forms the solid. This property
is unique to Ga, Ge and Bi.

-Sn
grey tin
(Diamond structure)

-Sn
white tin
(Metallic)

"manishkumarphysics.in"

14

CHEMISTRY
Reactivity towards acids :
C, Si, Ge unaffected by dilute acid but Sn dissolves in dilute HNO3 forming Sn(NO3)2. Pb dissolves slowly in
dilute HCl forming PbCl2 and quite readily in dilute HNO3 forming Pb(NO3)2 and oxides of nitrogen.
Si is oxidised and undergoes fluorination by hot concentrated HF/HNO3.
Sn dissolves in several concentrated acids. Pb does not dissolves in concentrated HCl because a surface
coating of PbCl2 is formed.

Reactivity towards alkalies :

Carbon is unaffected by alkalies. Si reacts slowly with cold aqueous solution of NaOH and readily with hot
NaOH solution giving solution of silicates [SiO4]4. Sn and Pb are amphoteric it dissolves slowly in cold and
readily in hot NaOH solution forming stannates Na2[Sn(OH)6] and plumbates Na2[Pb(OH)6].

Uses of carbon
Graphite fibres embedded in plastic material form high strength, lightweight composites. The composites are
used in products such as tennis rackets, fishing rods, aircraft and canoes. Being good conductor, graphite is
used for electrodes in batteries and industrial electrolysis. Crucibles made from graphite are inert to dilute
acids and alkalies. Being highly porous and having enormous surface area activated charcoal is used in
adsorbing poisonous gases; also used in water filters to remove organic contaminators and in air conditioning
system to control odour. Carbon black is used as black pigment in black ink and as filler in automobile tyres.
Coke is used as a fuel and largely as a reducing agent in metallurgy. Diamond is a precious stone and used
in jewellery. It is measured in carats (1 carat = 200 mg.).

OXIDES OF CARBON :
CARBON MONOXIDE (CO) :
Preparation :
(i)

It is formed together with CO2, when carbon or carbonaceous matter is oxidized by air or oxygen. It is also
produced when CO2 is reduced by red- hot carbon; this reaction is of importance in metal extractions.
C(s) + CO2(g) 2CO(g)

(ii)

In the laboratory it can be prepared by dehydrating methanoic acid with concentrated sulphuric acid .
373 K

HCOOH (liq) CO(g) + H2O

conc.H2SO 4

(iii)

If oxalic acid is dehydrated in the same way, CO2 is formed as well.

conc. H SO ,

4
H2C2O4 2
CO + CO2

H2O

(iv)

On commercial scale it is prepared by the passage of steam over hot coke. The mixture of CO and H2 thus
produced is known as water gas or synthesis gas.
4731273 K
C (s) + H2O (g)

CO (g) + H2(g) (water gas).

When air is used instead of steam, a mixture of CO and N2 is produced, which is called producer gas.
1273 K
2 C (s) + O2 (g) + 4 N2 (g)
2 CO (g) + 4 N2 (g) (Producer gas).

Water gas and producer gas are very important industrial fuels. Carbon monoxide in water gas or producer
gas can undergo further combustion forming carbon dioxide with the liberation of heat.
(v)

CO2 + H2 CO + H2O

(vi)

K4Fe(CN)6 + 6H2SO4 (concentrated) + 6H2O

2K2SO4 + FeSO4 + 3(NH4)2SO4 + 6CO

(vii)
(viii)

HCN + 2H2O HCOOH + 2NH3 (absorbed by H2SO4)

HCOOH
H2O + CO
Also obtained as by-product when carbon is used in reduction processes such as, of phosphite rock to give
phosphorus.

Properties :
(i)

Carbon monoxide is a colourless, odourless gas which burns in air with a blue flame, forming CO2. It is
sparingly soluble in water and is a neutral oxide. CO is toxic, because it forms a complex with haemoglobin
in the blood and this complex is more stable than oxy-haemoglobin. This prevents the haemoglobin in the red
blood corpuscles from carrying oxygen round the body. This causes oxygen deficiency, leading to
unconsciousness and then death.
HbO2 + CO HbCO + O2

"manishkumarphysics.in"

15

CHEMISTRY
Ordinary gas masks are no protection against the gas, since it is not readily adsorbed on active charcoal. In
the presence of air, a mixture of manganese (IV) oxide and copper(II) oxide catalytically oxidizes it to CO2,
and this mixed catalyst is used in the breathing apparatus worn by rescue teams in mine disasters.
(ii)

Carbon monoxide is a powerful reducing agent, being employed industrially in the extraction of iron and
nickel .
Fe2O3(s) + 3CO(g) 2Fe(s) + 2CO2(g) ;
NiO(s) + CO(g) Ni(s) + CO2(g)

(iii)

It reacts with many transition metals, forming volatile carbonyls; the formation of nickel carbonyl followed by
its decomposition is the basis of the Monds process for obtaining very pure nickel .
28 C
180 C
Ni(s) + 4CO(g)
Ni(s) + 4CO(g)
Ni(CO)4(liq)

(iv)

In addition to reacting with oxygen, carbon monoxide combines with sulphur to give carbonyl sulphide and
with chlorine in the presence of light to give carbonyl chloride (phosgene), used in the production of polyurethane
foam plastics. Phosgene is an exceedingly poisonous gas.
CO(g) + S(s) COS(s) (carbonyl sulphide) ; CO(g) + Cl2(g) COCl2(g) (carbonyl chloride)

(v)

Although carbon monoxide is not a true acid anhydride since it does not react with water to produce an acid,
it reacts under pressure with fused sodium hydroxide to give sodium methanoate :
dil. HCl
NaOH(liq) + CO(g) HCOONa(s)

HCOOH(aq)

(vi)

With hydrogen under pressure and in the presence of zinc oxide or chromium (III) oxide catalyst it reacts to
give methanol; this reaction is of industrial importance.
CO(g) + 2H2(g) CH3OH(liq)

(vii)

CO is readily absorbed by an ammonical solution of copper (I) chloride to give CuCl.CO.2H2O. It reduces an
ammonical solution of silver nitrate to silver (black) and, in the absence of other gaseous reducing agents,
this serves as a test for the gas. It can be estimated by reaction with iodine pentoxide, the iodine which is
produced quantitatively being titrated with standard sodium thiosulphate solution.
5CO(g) + 2O5(s) 2(s) + 5CO2(g)

(viii)

It reduces an aqueous PdCl2 solution to metallic Pd.

CARBON DIOXIDE (CO2) :

Preparation :
(i)

In the laboratory it can be conveniently made by the action of dilute hydrochloric acid on marble chips :
CO32-(aq) + 2H+(aq) CO2(g) + H2O()

(ii)

Industrially it is produced as a by-product during the manufacture of quicklime and in fermentation processes:
CaCO3(s) CaO(s) + CO2(g) ;

C6H12O6(aq){glucose} 2C2H5OH(aq) + 2CO2(g)

Properties :
(i)

It is a colourless, odourless and heavy gas which dissolves in its own volume of water at ordinary temperature
and pressure. Like all gases, it dissolves much more readily in water when the pressure is increased and this
principle is used in the manufacture of soda water and fizzy drinks.

(ii)

CO2 is easily liquefied (critical temperature = 31.1oC) and a cylinder of the gas under pressure is a convenient
fire extinguisher. When the highly compressed gas is allowed to expand rapidly solid carbon dioxide (dry
ice) is formed. Solid carbon dioxide sublimes at 78oC and, since no massy liquid is produced, it is a
convenient means of producing low temperatures.

(iii)

Carbon dioxide is the acid anhydride of carbonic acid, which is a weak dibasic acid and ionises in two steps
as follows :

H2CO3(aq) + H2O ()

HCO3 (aq) + H3O+ (aq)

HCO3 (aq) + H2O ()

CO32 (aq) + H3O+ (aq)

H2CO3 / HCO3 buffer system helps to maintain pH of blood between 7.26 to 7.42.
A solution of carbonic acid in water will slowly turn blue litmus red and when the solution is boiled, all the
CO2 is evolved.

"manishkumarphysics.in"

16

CHEMISTRY
(iv)

Carbon dioxide readily reacts with alkalies forming the carbonate and, if CO2 is in excess, the hydrogen
carbonate. This is the basis of the lime-water test for CO2 gas.
Ca(OH)2(aq) + CO2(g) CaCO3(s) + H2O(liq) ; CaCO3(s) + H2O(liq) + CO2(g) Ca(HCO3)2(aq)
The above reaction accounts for the formation of temporarily hard water.

(v)

Carbon dioxide, which is normally present to the extent of ~ 0.03% by volume in the atmosphere, is removed
from it by the process known as photosynthesis. It is the process by which green plants convert atmospheric
CO2 into carbohydrates such as glucose. The overall chemical change can be expressed as :
6 CO2 + 12 H2O

hv

C6H12O6 + 6 O2 + 6 H2O
Chlorphyll

By this process plants make food for themselves as well as for animals and human beings. But the increase
in combustion of fossil fuels and decomposition of limestone for cement manufacture in recent years seem
to increase the CO2 content of the atmosphere. This may lead to increase in green house effect and thus,
raise the temperature of the atmosphere which might have serious consequences.
(vi)

Gaseous CO2 is extensively used to carbonate soft drinks. Being heavy and nonsupporter of combustion it
is used as fire extinguisher. A substantial amount of CO2 is used to manufacture urea.

Recovery of CO2 :
(a)

Na2CO3 + CO2 + H2O

(b)

Girbotol process : 2HOCH2CH2NH2 + CO2 + H2O

Example-9

2NaHCO3
(HOCH2CH2NH3)2CO3

H2C2O4
gas (A) + gas (B) + liquid (C)
oxalic acid
Gas (A) burns with blue flame and is oxidised to gas (B). Gas (B) turns lime water milky.
NH ,
NH3 ,
(B)
Gas (A) + Cl2 (D) 3 (E)
Identify (A) to (E) and explain reactions involved.

Solution

H2C2O4
CO + CO2 + H2O
NH ,
NH3 ,
CO2
CO + Cl2 COCl2 3 NH2CONH2

CARBON SUBOXIDE (C3O2) :

This is an evil-smelling gas and can be made by dehydrating propanedioic acid (malonic acid), of which it is
the anhydride, with phosphorus pentoxide :
3 CH2(COOH)2 + P4O10 3C3O2 + 4H3PO4
When heated to about 200oC, it decomposes into CO2 and C:
C3O2(g) CO2(g) + 2C(s)
The molecule is thought to have a linear structure: O=C=C=C=O.

CARBONATES (CO32) AND BICARBONATES (HCO3)

Carbonic acid is a dibasic acids giving rise to two series of salts, carbonates (normal salts) and bicarbonates
(acid salts) due to successive removal of the replaceable hydrogens from H2CO3.
H2CO3 + NaOH NaHCO3 + H2O ; NaHCO3 + NaOH Na2CO3 + H2O

Preparation :
(i)

With NaOH :

2NaOH + CO2 Na2CO3 ; Na2CO3 + H2O + CO2 2NaHCO3

(ii)

By precipitation :

BaCl2 + Na2CO3 BaCO3 + 2NaCl

"manishkumarphysics.in"

17

CHEMISTRY
CARBIDES :
The binary compounds of carbon with other elements (less electronegative or of similar electronegativity) are
called carbides. They are classified into following 3 categories :
(i) Ionic
(ii) Covalent
(iii) Interstitial (or metallic)
(i)

Ionic carbides (or salt like carbides) : Generally formed by the most electropositive elements such as
alkali and alkaline earth metals and aluminium (Boron is exception). Based on the product obtained on
hydrolysis, they are further sub-classified into three types.
(a)

Methanides : These give CH4 on reaction with H2O.

Al4C3 + 12H2O 4Al (OH)3 + 3CH4 ; Be2C + 4H2O 2Be (OH)2 + CH4
These carbides contain C4 ions in their constitution.

(b)

Acetylides : These give C2H2 on reaction with H2O.

CaC2 + 2H2O Ca (OH)2 + C2H2 ; Al2 (C2)3 + 6H2O 2Al (OH)3 + 3C2H2
SrC2 + 2H2O Sr (OH)2 + C2H2
Such compounds contain C22 [: C C :]2 ions.

(c)

Allylides : These give 1-propyne on reaction with H2O.

Mg2C3 + 4H2O 2Mg (OH)2 + CH3 C CH
..

4
Such compounds contain C34 [: C C C :] ions.
..

(ii)

Covalent carbides
Compounds like CH4, CO2, CS2 can be considered to be covalent carbides. Besides these, some giant
molecules like SiC and B4C are also examples of covalent carbides.

(iii)

Interstitial or metallic carbides

Such carbides are formed by transition metals and some of the lanthanides and actinides. Interstitial carbides
retain many of the properties of metals. They conduct electricity by metallic conduction and have properties
of metals (a lusture like a metal). In these compounds carbon atoms occupy octahedral holes in the closed
packed metal lattice. These are generally very hard and have very high melting point (e.g. WC). Carbides of
Cr, Mn, Fe, Co and Ni are hydrolysed by water or dilute acids.

Example-10
Solution

In what respect the reaction of N2 with (i) CaC2 (calcium carbide) (ii) BaC2 (barium carbide) differ from
each other.
(i)
CaC2 reacts with N2 to form calcium cyanamide.

(ii)

1373 K
CaC2(s) + N2(g)

CaCN2(s) + C(s)
Calcium cyanamide
BaC2 reacts with N2 to form barium cyanide
Heating
BaC2(s) + N2(g)
Ba(CN)2 (s)
Barium cyanide

CARBORUNDUM (SiC) :
electric furnace
Preparation : SiO2 + 3C SiC + 2CO
2000 C

Properties :
(i)
(ii)
(iii)

It is a very hard substance (Hardness = 9.5 Moh)

On heating it does not melt rather decomposes into elements.
Not attacked by acids. However, it gives the following two reactions at high temperature.

SiC + 2NaOH + 2O2

Na2SiO3 + CO2 + H2O ;

SiC + 4Cl2
SiCl4 + CCl4

It has a diamond like structure in which each atom is sp3 hybridized. Therefore , each atom is tetrahedrally
surrounded by 4 atoms of other type.

"manishkumarphysics.in"

18

CHEMISTRY
SILICON :
Silicon is the second most abundant element occurring in the earths crust (about 28 per cent by weight) as
the oxide, silica, in a variety of forms, e.g., sand, quartz and flint, and as silicates in rocks and clays.

Preparation :
(i)

(ii)

The element is obtained from silica by reduction with carbon in an electric furnace.
SiO2(s) + 2C(s) Si(s) + 2CO(g)
Extremely pure silicon is obtained from chemically pure silicon by the method of zone refining.

SiO2 + 2Mg
2MgO + Si

Properties :

(i)
(ii)

Silicon is a very high melting-point solid with the same structure as diamond. The non-existence of an
allotrope with the graphite structure clearly shows the inability of silicon atoms to multiple bond with themselves.
In the massive form, silicon is chemically rather unreactive but powdered silicon is attacked by the halogens
and alkalies :
Si(powdered) + 2Cl2(g) SiCl4(liq.)
Si(powdered) + 2OH(aq) + H2O(liq) SiO32(aq) + 2H2(g)

(iii)

Si + 2KOH + H2O K2SiO3 + 2H2

(iv)

Na2CO3 + Si
Na2SiO3 + C

(v)

It is not attacked by acids except hydrofluoric acid, with which it forms hexafluorosilicic acid:
Si(s) + 6HF(g) H2SiF6(aq) + 2H2(g)

(vi)

2Mg + Si
Mg2Si (magnesium silicide)

COMPOUNDS OF SILICON:
SILICON DIOXIDE, SIO2 :
Silicon dioxide, commonly known as silica, occurs in several crystallographic forms. Quartz, cristobalite and
tridymite are some of the crystalline forms of silica, and they are interconvertable at suitable temperature.
Silicon dioxide is a covalent, three-dimensional network solid in which each silicon atom is covalently bonded
in a tetrahedral manner to four oxygen atoms. Each oxygen atom in turn covalently bonded to another silicon
atoms. Each corner is shared with another tetrahedron. The entire crystal may be considered as giant
molecule in which eight membered rings are formed with alternates silicon and oxygen atoms. Silica in its
normal form is almost non-reactive because of very high SiO bond enthalpy. It resists the attack by halogens,
dihydrogen and most of the acids and metals even at elevated temperatures. However, it is attacked by HF
and NaOH.
SiO2 + 2 NaOH Na2SiO3 + H2O ;
SiO2 + 4 HF SiF4 + 2 H2O
Quartz is extensively used as a piezoelectric material ; it has made possible to develop extremely accurate
clocks, modern radio and television broadcasting and mobile radio communications. Silica gel used as a
drying agent and as a support for chromatographic materials and catalysts. Kieselghur, an amorphous form
of silica is used in filtration plants.

SILICATES :
Binary compounds of silicon with oxygen are called silicates but they contain other metals also in their
structures.
(i)

Since the electronegativity difference between O & Si is about 1.7, so SiO bond can be considered 50%
ionic & 50% covalent.

(ii)

If we calculate the radius ratio then, r

Si4
O2

= 0.29

It suggests that the coordination number of silicon must be 4 and from VBT point of view we can say that Si
is sp3 hybridized. Therefore silicate structures must be based upon SiO44 tetrahedral units.
(iii)

SiO44 tetrahedral units may exist as discrete units or may polymerise into larger units by sharing corners.

"manishkumarphysics.in"

19

CHEMISTRY
CLASSIFICATION OF SILICATES :
(A)

Orthosilicates :
These contain discrete [SiO4]4 units i.e., there is no sharing of corners with one another as shown is figure.

Figure : 2
e.g. Zircon (ZrSiO4), Forsterite of Olivine (Mg2SiO4), Willemite (Zn2SiO4)
(B)

Pyrosilicate :
In these silicates two tetrahedral units are joined by sharing oxygen at one corner thereby giving [Si2O7]6
units.

Figure : 3
e.g. Thorteveitite (Sc2Si2O7), Hemimorphite (Zn3(Si2O7) Zn(OH)2H2O)

(C)

() charge will be present on the oxygen atoms which is bonded with one Si atom.

Cyclic silicates :
If two oxygen atoms per tetrahedron are shared to form closed rings such that the structure with general
formula (SiO32)n or (SiO3)n2n is obtained, the silicates containing these anions are called cyclic silicates.
Si3O96 and Si6O1812 anions are the typical examples of cyclic silicates.

O
O

O
O

O
O

(D)

Si3O96

O
Si6O1812

Figure : 4

Figure : 5

Chain silicates :
Chain silicates may be further classified into simple chain & double chain compounds.
In case of simple chains two corners of each tetrahedron are shared & they form a long chain of tetrahedron.
Their general formula is also same as the cyclic silicates i.e. (SiO3)n2n

"manishkumarphysics.in"

20

CHEMISTRY

Figure : 6
Similarly, double chain silicates can be drawn in which two simple chains are joined together by shared
oxygen. Such compounds are also known as amphiboles. The asbestos mineral is a well known example of
double chain silicates. The anions of double chain silicates have general formula (Si4O11)n6n

O
O

O
O

Figure : 7
e.g.,

Synthetic silicates (Li2SiO3, Na2SiO3), Spondumene (LiAl(SiO3)2),

Enstatite (MgSiO3), Diopside (CaMg(SiO3)2 ), Tremolite (Ca2Mg5(Si4O11)2 (OH)2 ), etc.

(E)

Two dimensional sheet silicates :

In such silicates, three oxygen atoms of each tetrahedral are shared with adjacent SiO44 tetrahedrals. Such
sharing forms two dimension sheet structure with general formula (Si2O5)n2n
e.g. Talc (Mg(Si2O5)2 Mg(OH)2 , Kaolin Al2(OH)4 (Si2O5)

(F)

Three dimensional sheet silicates :

These silicates involve all four oxygen atom in sharing with adjacent SiO44 tetrahedral units.
e.g. Quartz, Tridymite, Crystobalite, Feldspar, Zeolite and Ultramarines.

SILICONES :
Silicones are synthetic organosilicon compounds having repeated R2SiO units held by Si O Si linkages.
These compounds have the general formula (R2SiO)n where R = alkyl or aryl group.
The silicones are formed by the hydrolysis of alkyl or aryl substituted chlorosilanes and their subsequent
polymerisation. The alkyl or aryl substituted chlorosilanes are prepared by the following reactions.
(a)
(b)

RCl + Si
300 C R3SiCl + R2SiCl2 + RSiCl3
Cu

RMgCl + SiCl4 RSiCl3 + MgCl2

2RMgCl + SiCl4 R2SiCl2 + 2MgCl2
3RMgCl + SiCl4 R3SiCl + 3MgCl2

After fractional distillation, the silane derivatives are hydrolysed and the hydroxides immediately condense
by intermolecular elimination of water. The final product depends upon the number of hydroxyl groups originally
bonded to the silicon atom:

"manishkumarphysics.in"

21

CHEMISTRY

In this manner several molecules may combine to form a long chain polymer whose both the ends will be
occupied by OH groups. Such compounds are generally represented from the following formula.

The polymer chain depicted above is terminated by incorporating a small quantity of the monochlorosilane
derivative into the hydrolysis mixture.

Silicones can be prepared from the following types of compounds only.

(i) R3SiCl
(ii) R2SiCl2
(iii) RSiCl3

Silicones from the hydrolysis of (CH3)3 SiCl

H2O
(CH3)3 SiCl
(CH3)3 Si (OH)

Silicones from the hydrolysis of a mixture of (CH3)3 SiCl & (CH3)2 SiCl2
The dichloro derivative will form a long chain polymer as usual. But the growth of this polymer can be
blocked at any stage by the hydrolysis product of mono-chloro derivative.

Silicones from the hydrolysis of trichloro derivative.

When a compound like CH3SiCl3 undergoes hydrolysis, a complex cross-linked polymer is obtained as
chain can grow in three places as

The hydrocarbon layer along the silicon-oxygen chain makes silicones water-repellent.

Silicones find a variety of applications because of their chemical inertness, water repelling nature, heat
resistance and good electrical insulation property.
Products having the physical properties of oils, rubbers and resins can be produced using silicones. Silicone
varnishes are such excellent insulators and so heat-resistance that insulating wiring with them enabled
motors to work over-loads that would have set fire to the insulation formerly used. Silicone fluids are used as
hydraulic systems of planes as they are thermally stable and their viscosity alters very little with temperature.
Silicone rubbers are used in placed of ordinary rubber as they retain their elasticity at much lower temperature
than ordinary rubber.

"manishkumarphysics.in"

22

CHEMISTRY
COMPOUNDS OF TIN :
STANNOUS OXIDE (SnO) :
Preparation :
By heating stannous hydroxide, Sn(OH)2, in absence of air.
Sn(OH)2 SnO + H2O

Properties :
SnO is an amphoteric dark grey or black solid oxide, insoluble in water. It dissolves in acids to form
stannous salts.
SnO (basic) + 2H+ Sn2+ + H2O ;
SnO (acidic) + 4OH + H2O [Sn(OH)6]4 or SnO22 (stannite)
Stannites are only known in aqueous solutions. Stannites absorb oxygen from air and are oxidised to stannate
which are stable in nature.
2 Na2SnO2 + O2 2 Na2SnO3

Uses : For the preparation of stannous chloride and stannous sulphate.

STANNIC OXIDE (SnO2) :
Preparation :
By heating tin with concentrated HNO3.
Sn + 4HNO3 H2SnO3 + 4NO2 + H2O ;

H2SnO3
H2O + SnO2

Properties :
(i)

It is a white solid insoluble in water.

(ii)
(iii)

It is amphoteric in nature.
It dissolves in concentrated H2SO4 to form stannic sulphate.
SnO2 + 2H+ Sn+4 + 2H2O

(iv)

It also dissolves in concentrated alkalies to form alkali metal stannate solution.

SnO2 + 6OH [Sn(OH)6]2 or SnO32 (stannate)

STANNOUS CHLORIDE (SnCl22H2O) :

Preparation :
(i)
(ii)

Sn + 2HCl (concentrated) SnCl2(aq) + H2

SnO + 2HCl SnCl2(aq) + H2O
The solution on crystallization gives colourless crystals of SnCl22H2O.

Properties :
(i)
(ii)

(iii)

It is a colourless solid soluble in water. It is soluble in alcohol and ether also.

Reducing agent : It is a stronger reducing agent.
(a)
Reaction with Hg2Cl2 solution: When SnCl2 solution is added to an aqueous solution of mercuric
chloride, a silky white precipitate of mercurous chloride, Hg2Cl2 is formed which turns black due to
further reduction of Hg2Cl2 to black mercury.
2HgCl2 + SnCl2 Hg2Cl2 + SnCl4 ; Hg2Cl2 + SnCl2 2Hg + SnCl4
(b)
It reduces ferric chloride, FeCl3 to ferrous chloride, FeCl2.
2FeCl3 + SnCl2 2FeCl2 + SnCl4
(c)
It also reduces CuCl2 to CuCl (white).
SnCl2 partly hydrolyses in water forming the basic chloride, Sn(OH)Cl.
SnCl2 + H2O Sn(OH)Cl (white) + HCl
As it produces a weak base and strong acid its aqueous solution is acidic. Its hydrolysis can be prevented
by adding concentrated HCl to it during the process of its preparation.

Uses :
1.
2.
3.

In dye industry as a reducing agent.

For the test of mercuric salt.
For the preparation of other stannous compounds.

"manishkumarphysics.in"

23

CHEMISTRY
STANNIC CHLORIDE (SnCl4) :
Preparation:
(i)

By the action of Cl2 gas on heated Sn,

Sn + 2Cl2 SnCl4

(ii)

By the action of Cl2 on stannous chloride,

SnCl2 + Cl2 SnCl4

(i)

It is a colourless fuming liquid ; boiling point is 114oC.

(ii)

Action of moisture: It absorbs moisture and becomes converted into hydrated stannic chlorides, SnCl43H2O,
SnCl45H2O, SnCl46H2O and SnCl48H2O. SnCl4 . 5 H2O is known as butter of tin or oxymercurate of tin.

(iii)

Hydrolysis with water : It hydrolyses in dilute solution but it is incomplete and can be repressed in presence
of halogen acid.
SnCl4 + 4H2O Sn(OH)4 + 4HCl ;
Sn(OH)4 + 4HCl SnCl4 + 4H2O ;
SnCl4 + 2HCl H2SnCl6 (stannic acid)

(v)

In presence of ammonium chloride, it forms ammonium salt of H2SnCl6 (stannic acid).

SnCl4 + 2 NH4Cl (NH4)2SnCl6

Properties :

Uses :
For the preparation of stannic compounds.

COMPOUNDS OF LEAD :
LITHARGE (PbO) :
PbO is prepared by heating Pb at 180oC. It is a volatile yellow organic solid.

2Pb + O2
2PbO

It is an amphoteric oxide and dissolves in acids as well as in alkalies.

It is used in rubber industry and in the manufacture of flint glasses, enamels, and storage batteries.

LEAD DIOXIDE (PbO2) :

Preparation :
(i)

PbO + NaOCl
PbO2 (insoluble) + NaCl

(ii)

Pb3O4 + 4HNO3 (dilute) 2Pb(NO3)2 + PbO2 + 2H2O

Properties :
(i)

It is a chocolate / dark brown coloured insoluble solid.

On heating at 440oC it gives the monoxide.
440 C

2PbO + O2
2PbO2

(ii)

PbO2 is an oxidising agent and reduced to PbO since stability of Pb(II) > Pb(IV) based on inert pair effect.
(a)
It oxidizes HCl to Cl2.
PbO2 + 4HCl PbCl2 + 2H2O + Cl2
(b)

It oxidises Mn salt to permanganic acid.

2MnSO4 + 5PbO2 + 6HNO3 2HMnO4 + 2PbSO4 + 3Pb(NO3)2 + 2H2O

(c)

It reacts with SO2 at red heat to form lead sulphate.

PbO2 + SO2
PbSO4

(iii)

It dissolves in concentrated NaOH solution.

PbO2 + 2OH + 2H2O [Pb(OH)6]2 (plumbate)

(iii)

It reacts with concentrated HNO3 to evolve oxygen gas.

PbO2 + 2HNO3 Pb(NO3)2 + 1/2O2 + H2O
PbO2 + H2SO4 PbSO4 + 2H2O + O2

"manishkumarphysics.in"

24

CHEMISTRY
Uses :
It is used in match industry for making ignition surface of match boxes, in the preparation of KMnO4 and in
explosives.

RED LEAD (Pb3O4) :

Preparation :
It is prepared by heating PbO at 450oC for a long time.
450C
6PbO + O2
2Pb3O4

Properties :
(i)

It is a red powder insoluble in water but when heated with concentrated HNO3 it gives a red precipitate of
PbO2.
Pb3O4 + 4HNO3 2Pb(NO3)2 + PbO2 + 6H2O

(ii)

When heated above 550oC, it decomposes into PbO.

Pb3O4
6PbO + O2

(iii)

It oxidizes concentrated HCl to chlorine.

Pb3O4 + 8HCl 3PbCl2 + 4H2O + Cl2

(iv)

When heated with concentrated H2SO4 it evolves oxygen.

2Pb3O4 + 6H2SO4 6PbSO4 + 6H2O + O2

Uses :
It is used as an oxidizing agent, for making metal protecting paints like red oxide paint, for making special
lead cement and for making flint glass.

LEAD CHLORIDE (PbCl2) :

Preparation:
Pb(OH)2PbCO3 (basic lead carbonate) + 4HCl 2PbCl2 + CO2 + 3H2O

Properties :
It is a white crystalline solid, insoluble in cold water but soluble in boiling water. It dissolves in concentrated
HCl forming a complex ion.
2 HCl + PbCl2

H2PbCl4 (chloroplumbous acid)

Uses : It is used for making pigments for paints.

LEAD TETRACHLORIDE (PbCl4) :
Preparation :
It is prepared by the following methods:
(i)

(ii)

By dissolving PbO2 in cold concentrated HCl

PbO2 + 4HCl PbCl4 + 2H2O
PbCl4 dissolves in excess of HCl to form a stable solution of H2PbCl6.
PbCl4 + 2HCl H2PbCl6

When NH4Cl is added to a solution of chloroplumbic acid, a yellow precipitate of ammonium

chloroplumbate is formed.
H2PbCl6 + 2NH4Cl (NH4)2PbCl6 + 2HCl

When crystals of ammonium chloroplumbate is added to ice cold concentrated H2SO4, lead
tetrachloride is formed and separates as a yellow oily liquid.
(NH4)2PbCl6 + H2SO4 PbCl4 + (NH4)2SO4 + 2HCl

By the action of Cl2 on a solution of PbCl2 in concentrated HCl

PbCl2 + Cl2 PbCl4

"manishkumarphysics.in"

25

CHEMISTRY
Properties :
(i)

It is a yellow oily liquid which solidifies at 10oC and is soluble in organic solvents like ethanol and benzene.

(ii)

Rapid hydrolysis with water forms PbO2 precipitate

PbCl4 + 2H2O PbO2 + 4HCl

Uses : It is used for making stannic compounds.

Example-11

Thermodynamically graphite is more stable than diamond but diamond does not transform into
graphite on their own, why ?

Solution

This conversion is not favoured by kinetic factors (the activation energy for this is very high)

Example-12

Complete the following reactions

(a) CO + H2

ZnO Cu

.....................................

420 670 k, 300 atm

(b) R3SiOH + OHSiR3 .......................... + ..............................

(c) Na2CO3 + Si .......................... + ..............................
Solution

ZnO Cu
(a) CO + 2H2 CH3OH
420 670 k, 300 atm

(b) R3SiOH + OHSiR3 R3SiO SiR3 + H2O

(c) Na2CO3 + Si Na2SiO3 + C
Example-13

Draw the structure of cyclic silicate containing Si6O1812 ion.

Solution

Si6O1812

"manishkumarphysics.in"

26

CHEMISTRY

MISCELLANEOUS SOLVED EXAMPLES

1.
Sol.

Al and Ga are trivalent in their compounds but monovalent compounds are the most stable down the 13th
group. Why ?
Down the group (13th), the stability of +3 state decreases and that of +1 state increases due to the prominent
"inert pair" effect.
Al3+ > Ga3+ > ln3+ > Tl3+
Most stable lest stable
stability

Tl > ln > Ga > Al+

2.
Sol.

Ans.
Sol.

If you have a mixture of CO and CO2, how would you know about the relative proportions of the two gases in
the given mixture ?
(i)
Pass mixture through the Ca(OH)2 solution; CO2 is absorbed by Ca(OH)2. The residual volume will
be that of CO
Ca(OH)2 + CO2 CaCO3 + H2O
(ii)

3.

Pass mixture through I2O5 ; CO reduces I2O5 to I2.

5CO + I2O5 I2 + 5CO2
I2 thus liberated is determined by titration with Na2S2O3.
2Na2S2O3 + I2 2NaI + Na2S4O6
This is the quantitative method of estimation of CO.

What will happen if borontrifluoride is kept in moist air ?

(A) It will strongly fumes.
(B) It will partially hydrolysed.
(C) It will completely hydrolysed.
(D) None of these
(A)
In moist air it strongly fumes :but it is partially hydrolysed by excess of water.
4BF3 + 6H2O 3H3O+ + 3BF4 + B(OH)3
BF3 is a colourless gas.

4.

Sol.

What happens when : (write only chemical reactions)

(a) iodine is treated with SnCl2.
(b) carbondioxide is passed through a concentrated aqueous solution of sodium chloride saturated with
ammonia.
(c) red lead is treated with nitric acid.
(d) dilute nitric acid is slowly reacted with tin.
(d) Sn + 10HNO3 (dilute) 4Sn(NO3)2 + NH4NO3 + 3H2O
(b) NaCl + NH4OH + CO2 NaHCO3 + NH4Cl
(a) 2SnCl2 + I2 2SnCl2I2 SnCl4 + SnI4
(c) Pb3O4 + 4HNO3 2Pb(NO3)2 + PbO2 + 2H2O

5.

Ans.
Sol.

True / False
(a)
BCl3 in aqueous solution exists as B3+ and Cl.
(b)
Pure crystalline boron is very unreactive and it is attacked only at high temperatures by strong
oxidising agents such as a mixture of hot concentrated H2SO4 and HNO3.
(c)
AlX3 (X = Cl, Br) exists as dimer and retains dimer formula in non-polar solvents like ether, benzene
etc.
(d)
Be2C is called acetylide because it reacts with water yielding ethyne.
(e)
Pb3O4 a double oxide, is obtained by heating lead (II) oxide in air.
(a)
False (b)
True
(c)
True
(d)
False (e)
True
(a)
Statement is incorrect. BCl3 hydrolyses in aqueous solution to give boric acid. Because it has large
ionisation energies and to make the enthalpy of solution of BCl3 negative, the enthalpy of hydration
of B3+ should be very high (~ 600 g kJ) which is unlikely for the small B3+ cation.
(b)
2B + 6HNO3 (aq.) 2H3BO3 (aq.) + 6NO2 (g)

"manishkumarphysics.in"

27

CHEMISTRY
(c)

Statement is correct and its dimer structure is as follows. It acquires this structure for attaining an
octet of electrons. Dimer formula retains in non-polar solvent like ether, benzene

(d)

Statement is incorrect as it is methanide because it gives methane on reaction with water.

Be2C + 4H2O 2Be(OH)2 + CH4

(e)
6.

Ans.
Sol.
7.

Sol.

3PbO + O2 Pb3O4

Statement - 1 : PbO2 is an oxidising agent and reduced to PbO.

Statement - 2 : Stability of Pb (II) > Pb (IV) on account of inert pair effect.
(A) Statement-1 is True, Statement-2 is True; Statement-2 is a correct explanation for Statement-1.
(B) Statement-1 is True, Statement-2 is True; Statement-2 is NOT a correct explanation for Statement-1
(C) Statement-1 is True, Statement-2 is False
(D) Statement-1 is False, Statement-2 is True
(A)
Both are correct statements and statement-2 is the correct explanation of statement-1.
Write the chemical equations to represent the following reactions.
(a) The oxidation of HCl (aq) to Cl2 (g) by PbO2.
(b) The disproportionation of SnO to Sn and SnO2.
(a) PbO2 + 4HCl PbCl2 + 2H2O + Cl2
(b) 2SnO Sn + SnO2

8.
Sol.

What will happen if we take Si(CH3)Cl3 as a starting material for the preparation of commercial silicon
polymer ?
With Si(CH3)Cl3 the chain will grow in three places and we will get cross-linked silicon polymer as shown
below :

CH3
CH3
|
|
O Si O Si O
|
|
O
O
|
|
O Si O Si O
|
|
CH3
CH3
9.
Sol.

Give three properties of diamond.

Diamond is very hard, high melting solid. It is an electrical insulator.

10.

The silicate anion in the mineral kionite is a chain of three SiO4 tetrahedra that share corners with adjacent
tetrahedra. The mineral also contains Ca2+ ions, Cu2+ ions, and water molecules in a 1 : 1 : 1 ratio.
(a) Give the formula and charge of the silicate anion.
(b) Given the complete formula for the mineral.
(a)
The silicate anion has three SiO4 tetrahedra that share corners with adjacent tetrahedra thus silicate
is Si3O10, hence it can be represented as with charge as = 3 4n + 10 (2) = 8

Sol.

O
O
O

|
|
|
O Si O Si O Si O

|
|
|

O
O
O

(b)

Ca2+, Cu2+ and H2O are in the ratio of 1 : 1 : 1 and to balance (8) charge of silicate as ion, (+8)
charge is required thus there are two units each of Ca2+, Cu2+ and H2O thus, kinoite has formula
Ca2Cu2Si3O10 . 2H2O.

"manishkumarphysics.in"

28

CHEMISTRY
11.

Ans.
Sol.

12.
Ans.
Sol.

Statement - 1 : The thermal stability of hydrides of carbon family is in order :

CH4 > SiH4 > GeH4 > SnH4 > PbH4
Statement - 2 : EH bond dissociation enthalpies of the hydrides of carbon family decrease down the group
with increasing atomic size.
(A) Statement-1 is True, Statement-2 is True; Statement-2 is a correct explanation for Statement-1.
(B) Statement-1 is True, Statement-2 is True; Statement-2 is NOT a correct explanation for Statement-1
(C) Statement-1 is True, Statement-2 is False
(D) Statement-1 is False, Statement-2 is True
(A)
Both are correct statements and statement-2 is the correct explanation of statement-1. Down the group the
size of atom increases and thus bond length increases.

Which one of the following element does not dissolve in fused or aqueous alkalies ?
(A) Boron
(B) Silicon
(C) Aluminium
(D) None of these
(D)
Boron dissolved in fused alkalies according to the following reaction.
fused
2B + 6NaOH 2Na3BO3 + 3H2
Silicon and aluminium dissolved in both fused and aqueous alkalies.

13.
Sol.
14.

Ans.
Sol.

15.

Ans..
Sol.

What happens when CO2 (g) is passed through sodium meta borate solution ?
4NaBO2 + CO2 Na2B4O7 + Na2CO3
Which of the following statement(s) is/are correct ?
(A) B2O3 and SiO2 are acidic in nature and are important constituents of glass.
(B) Borides and silicide are hydrolysed by water forming boranes and silanes respectively.
(C) Diborane on reaction with chlorine (g) forms B2H5Cl.
(D) SiO44 gets hydrolysed by acid or water and form Si2O76.
(A), (B) and (D)
(A), (B) and (D) are correct statements but (C) is incorrect.
B2H6 + 6Cl2 2BCl3 + 6HCl
Match the following :
Column - I
Column - II
(A)
Boron
(p)
Forms acidic oxides.
(B)
Carbon
(q)
Pure crystalline form is obtained by Van Arkel method.
(C)
Tin
(r)
Exists in allotropic forms.
(D)
Aluminium
(s)
Hydroxide is amphoteric in nature.
(A - p,q,r); (B - p,r) ; (C - r,s) ; (D - s)
(A)
Exists in various allotropic forms and its oxide, B2O3 is acidic in nature.
red hot W
2BI3 2B + 3I2
Van Arkel method

(B)
(C)

(D)

Exists in various allotropic forms like diamond, graphite etc. and its oxide CO2 is acidic in nature.
Exists in allotropic forms like grey tin (-Sn) and white tin (-Sn). Hydroxide is amphoteric in nature.
Sn(OH)4 + 2OH [Sn(OH)6]2
Sn(OH)4 + 4H+ Sn4+ + 4H2O
Hydroxide is amphoteric in nature.
Al(OH)3 + OH [Al(OH)4]
Al(OH)3 + 3H+ Al3+ + 3H2O

"manishkumarphysics.in"

29