Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 130 views

    ISC2 Series

    Uploaded by

    Benicio Joaquín Ferrero Brebes
    ISC2 Mechanical Seals

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    ISC2 Series

    Uploaded by

    Benicio Joaquín Ferrero Brebes
    130 views6 pages
    ISC2 Mechanical Seals

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    ISC2 Mechanical Seals

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    130 views6 pages

    ISC2 Series

    Uploaded by

    Benicio Joaquín Ferrero Brebes
    ISC2 Mechanical Seals

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 6

    ISC2 Series

    Innovative standard cartridge seals


    Sealing solutions for fluid handling applications
    on shaft diameters up to 200 mm (8.000 inch)

    ISC2 Series seals meet all major international


    standards and are designed to fit hundreds of
    pump models from global manufacturers.

    Increased reliability and reduced cost of ownership


    in a versatile cartridge seal
    The ISC2 Series is a complete family of mechanical
    seals that provide exceptional reliability and
    standardization over the widest variety of industrial
    applications and equipment.

    Improve operational efficiency


    throughout your facility
    Based on an extensive global review of equipment
    requirements, performance expectations, service
    conditions and best practices, ISC2 seals are the most
    capable general purpose cartridge seals available.
    Facilities that standardize with ISC2 seals will
    immediately benefit from less inventory, greater flexibility,
    rapid availability, less downtime and longer seal life.

    Protect your employees, protect your


    environment
    ISC2 seals do more to provide a safe work environment
    and protect the natural environment than any other
    standard cartridge seal. Single seals have capable throttle
    bushings to protect against leaks. Pressurized dual seals
    provide zero process emissions. The outboard seal of
    dual seals can handle full operating conditions if the
    inboard seal were to fail. All seal faces are dual balanced
    for normal and reverse pressure operation.

    ISC2 seals work hard to eliminate the possible causes


    of leakage. Our thermal management technology
    for dry running tolerance, robust seal face drive
    mechanisms, high-efficiency barrier circulation, rigid
    setting devices and high quality materials all contribute
    to improve seal life even with multiple service
    conditions, off-design operation, and frequent starts
    and stops. ISC2 seals are capable of sustaining years
    of uninterrupted, long-term operation.

    Youre not alone with Flowserve


    Through our network of Quick Response
    Centers located throughout the world, ISC2 seal
    hardware is only one component of Flowserves
    commitment to reducing your total cost of
    ownership. Our seal hardware is backed by
    24-hour support, on-site service, engineering
    analysis, seal repair capabilities, customized
    stocking programs and on-time delivery.
    Our ultimate demonstration of commitment
    to customer service is through a LifeCycle
    Advantage program where ISC2 seals fit
    perfectly into inventory standardization programs
    and measurably improve mean time between
    repair (MTBR).

    ISC2 Series seals succeed in the widest variety of industries


    and applications
    With the most comprehensive industry
    coverage, ISC2 seals may be the only
    seals you need

    Water and Wastewater - simple yet robust single


    pusher cartridge seals are ideal for cost-effective
    sealing; hard face options improve solids handling

    Chemical - corrosion-resistant standard and optional


    materials of construction; excellent dual seal performance
    in hazardous and toxic fluids

    Mining - pusher seals handle light solids up to


    10% by weight with hard-on-hard seal faces;
    smooth geometry reduces opportunity for erosion

    Petrochemical - pusher and bellows seal geometries


    engineered for a broad range of equipment sizes
    and operating conditions facilitate plant-wide design
    standardization

    Power - single seals with an optional circulating


    device provide economical warm water sealing on
    condensate and circulation pumps

    Corn processing - drive mechanisms tolerate high


    viscosity-driven torque and sticky fluids; high barrier
    flow rates enhance dual seal cooling
    Biofuels - economical designs are versatile to multiple
    service types; cartridge installation is easy and the first
    step toward reliability
    Pulp & paper - retrofit more packed pumps to
    significantly reduce leakage and water consumption;
    springs located outside the process fluid prevent clogging

    Unloading terminals - seal face thermal


    management survives short-term dry run
    events and batch processes

    API 682 / ISO 21049 is just another


    standard we satisfy
    Standard ISC2 seals have surpassed all
    qualification testing requirements for Type
    A and B, Arrangement 1, 2 and 3 seals as
    required by API 682/ISO 21049. All design
    requirements for Category 1 and 2 services are
    satisfied with ISC2-682 seals, which feature
    non-slotted pilot-fit glands, thick sleeves,
    setting plates and much more. ISC2-682 seals
    will help facilities align their standardization
    programs with the sealing industrys most
    comprehensive best-practices standard.

    Advanced ISC2 seal design features enable superior


    rotating equipment reliability
    Tolerate dry running events with our
    exclusive thermal management technology
    Thermally conductive and mechanically compliant graphite
    material dramatically improves heat transfer between the
    silicon carbide rotating seal face and the sleeve. The sleeve
    acts as a heat sink, lowering seal face operating temperatures
    and transforming cavitating and dry running bad actors into
    highly reliable installations.

    Robust drive mechanisms deliver high


    torque loads with low seal face stress
    Square-head drive pins self-align with the seal faces to
    distribute torque loads evenly over an area instead of
    a high-stress point load, reducing seal face fractures.
    The torque carrying capability of the ISC2 seal is three
    times that of similar competitor seals.

    sleeve

    graphite
    gasket

    carbon
    stationary
    face
    silicon carbide
    rotating face

    ISC2 Single Stationary


    Pusher Seal

    square
    head pin

    Safe containment is provided


    by an uncompromising throttle
    bushing
    A substantial fixed carbon bushing on the
    atmospheric side of single seals provides
    an added measure of safety and reliability
    in the unlikely event of a seal failure.
    Process leakage is directed to the drain
    for safe handling and disposal.

    Industrys most durable metal bellows


    are bigger and better
    Edge-welded metal bellows of Alloy C-276 metallurgy are
    well suited for a wide range of chemical environments in seal
    sizes up to 95 mm (3.750 inch). Rotating bellows have a
    self-cleaning effect and are the preferred solution for highly
    corrosive services where avoiding seal face
    hang-up is especially critical.

    Hard set screws bite harder for better


    holding power
    Drive collar set screws of 17-4 H900 stainless steel
    securely engage the shaft or pump sleeve and lock
    the cartridge sleeve in place. Opportunity for galling
    the shaft or drive collar is greatly reduced in case
    the seal ever needs to be removed.

    Enhanced dual seal barrier


    circulation promotes cool
    running
    Dissipating seal-generated heat and
    circulating clean barrier fluid are
    essential ingredients for successful
    dual seal operation. ISC2 dual seals
    incorporate an optimized circulating
    feature including an advanced
    design volute groove to significantly
    increase barrier fluid flow.

    ISC2 Dual Rotating


    Metal Bellows Seal

    Materials of Construction
    Metal Parts 316 Stainless Steel, Alloy C-276, Alloy 20, Titanium

    Operating Parameters
    Pressure
    Pusher seal
    0 to 20.6 bar (300 psig)
    Metal bellows seal
    0 to 13.8 bar (200 psig)

    Seal Faces Premium Resin Carbon vs. Sintered Silicon Carbide


    Sintered Silicon Carbide vs. Sintered Silicon Carbide
    Premium Resin Carbon vs. Tungsten Carbide
    Temperature
    -40 to 204C (-40 to 400F)
    Tungsten Carbide vs. Sintered Silicon Carbide
    Maximum Speed
    3600 rpm or 23 m/s (75 fps)
    Metal Bellows Alloy C-276
    Seal Chamber
    ASME B-73, EN 12 756,
    Specifications
    JIS, ISO 3069, API 682
    Elastomers Fluoroelastomer, Perfluoroelastomer,
    EPDM, TFE-Propylene
    Shaft Size

    5
    Springs Alloy C-276
    Pusher seal
    25 to 200 mm (1.000" to 8.000")
    Metal bellows seal
    25 to 95 mm (1.000" to 3.750")
    Set Screws 17-4 H900 Stainless Steel

    ISC2 Series seals: Innovative engineering, standard excellence,


    cartridge simplicity
    ISC2 seals are available in four
    primary configurations
    Designs for standard bore seal chambers are
    shown. Enlarged bore and other seal chamber
    sizes are available.

    Single Pusher
    Single Metal Bellows

    Dual Pusher

    Dual Metal Bellows

    Pre-engineered ISC2 seals are available for


    most of your pumping equipment including
    ABS

    Goulds/ITT

    Ruhrpumpen

    Ahlstrom

    IDP

    Scanpump

    Allis-Chalmers

    Johnston

    Shin Nippon

    Arai

    KSB

    Shinryo

    Aurora

    Kubota

    SIHI

    CPC

    LaBour

    Sulzer

    Dean

    Lawrence

    Taiheiyo

    Deming

    Malhaty

    Torishima

    Durco

    Masuda

    Union

    Ebara

    Moyno

    United

    Flowserve

    Netzsch

    Viking

    Floway

    Nishigaki

    Warren

    Furukawa

    Pacific

    Weir

    Fybroc

    Peerless

    Wilson-Snyder

    Gorman-Rupp

    Robuschi

    Worthington

    ...custom solutions that solve unique


    equipment needs.

    FSD243eng REV 6-12 Printed in USA

    To find your local Flowserve representative


    and find out more about Flowserve Corporation,
    visit www.flowserve.com

    USA and Canada


    Kalamazoo, Michigan USA
    Telephone: 1 269 381 2650
    Telefax: 1 269 382 8726
    Europe, Middle East, Africa
    Roosendaal, The Netherlands
    Telephone: 31 165 581400
    Telefax: 31 165 554590

    Flowserve Corporation has established industry leadership in the design and manufacture of its products. When properly
    selected, this Flowserve product is designed to perform its intended function safely during its useful life. However, the
    purchaser or user of Flowserve products should be aware that Flowserve products might be used in numerous applications
    under a wide variety of industrial service conditions. Although Flowserve can provide general guidelines, it cannot
    provide specific data and warnings for all possible applications. The purchaser/user must therefore assume the ultimate
    responsibility for the proper sizing and selection, installation, operation, and maintenance of Flowserve products. The
    purchaser/user should read and understand the Installation Instructions included with the product, and train its
    employees and contractors in the safe use of Flowserve products in connection with the specific application.
    While the information and specifications contained in this literature are believed to be accurate, they are supplied for
    informative purposes only and should not be considered certified or as a guarantee of satisfactory results by reliance thereon.
    Nothing contained herein is to be construed as a warranty or guarantee, express or implied, regarding any matter with respect
    to this product. Because Flowserve is continually improving and upgrading its product design, the specifications, dimensions
    and information contained herein are subject to change without notice. Should any question arise concerning these provisions,
    the purchaser/user should contact Flowserve Corporation at any one of its worldwide operations or offices.

    2012 Flowserve Corporation

    Asia Pacific
    Singapore
    Telephone: 65 6544 6800
    Telefax: 65 6214 0541
    Latin America
    Mexico City
    Telephone: 52 55 5567 7170
    Telefax: 52 55 5567 4224

    You might also like