Provodni Izolatori

SA 44-721-1
Sales Aid
April, 2000
Power Transformer
Replacement
Parts
ABB Power Transmission
C ACPA
IES
A PAB
B IILLI TIIT
ES
TAP CHANGERS
CONTROLS
BUSHINGS
COOLING UNITS
GAUGES
SUDDEN PRESSURE RELAYS
MECHANICAL RELIEF DEVICES
BUSHING POTENTIAL DEVICES (PBA2)
DEHYDRATING BREATHERS
INERTAIRE
The ABB Components Division, located in Alamo, TN, owns and maintains over 10
million documents and design data on transformers manufactured by:
General Electric (Pittsfield - 40 MVA and larger)
ABB (Muncie and St. Louis)
Central Moloney (St. Louis - 5 MVA and larger)
This detailed and valuable information allows ABB to provide parts that meet or
exceed the original material specifications.
ABB PowerTransmission
TA P
ANN
GRE
TA PCCH
HA
GE
S RS
Tap Changers
UTT Contact Upgrade Kit
Contacts and Kits are carried in stock for:

Current Model ABB UZE and UZF Load Tap Changers
Older Model Westinghouse UTT, UTT-A and UTT-B
Older Model Westinghouse UVT, UTS and UTS-A
Parts are also available for:

Westinghouse type URT, UTH, UTN, URS, UT, UTR, UR
and General Electric Load Tap Changers
CCOO NNTTRORO
LS L S
Panels
Sudden Pressure
Relay Panel
SPR, Fans
Seal-In panels for Sudden Pressure
Relay devices, and Cooling Fans
are carried in stock.
Components
Replacement electrical components are
available for existing control cabinets,
such as relays, circuit breakers and contactors.
CT Junction Block Kits

Kits replacing 37, 20, and 10 point epoxy
blocks are carried in stock.
CT Junction Block Kit
B UBSU H
S HIIN
N GG
SS
Refurbished/Replacement Bushings
Available for those manufactured by ABB, Westinghouse, General
Type O Plus C
Electric, and Lapp, as well as other domestic manufacturers for all kV

classes up to 800 kV, 2100 kV, BIL. The Bushing Cross Reference
Guide is available to facilitate the selection of over 5,000 replacement
bushings for obsolete designs or bushings produced by other
manufacturers. Refurbishment is an economical alternative for bushings
115kV and higher, or when the current exceeds 2500 A.
Replacement Bushings
Incorporates the leading condenser design with optimum shell designs.
Flange and cable adapters are available to facilitate replacement.
Refurbished Bushings
Same warranty as new bushings is provided.
Obsolete components are either replaced with those which conform to
original specification or are upgraded to incorporate the latest
technology.
Included is ABBs state-of-the-art fused-ink, capacitive-graded
condenser core with guaranteed lowest power factor and partial
discharge in the industry.
Type O Plus C
Bushings are designed for use in transformers and oil-filled circuit
breakers. Designs exist for oil-to-air, vertical and horizontal
applications. Offered in 400 A to 5000 A current ratings. Available for
15kV through 800kV voltage ratings. Meets or exceeds the
IEEE/ANSI, and CSA standards.
BBU
SHH
US
I NIGN
SGS
Type T Bushings
High-current condenser bushings designed for use in
transformers and other oil-filled apparatus for both vertical
and horizontal mounting. Offered in 400A to 21,500 A
Type T
current ratings. Available from 15kV through 34.5 kV

voltage ratings.
Type A Bushings
Stud-type designs used for applications with oil-filled
transformers and generators for either vertical or horizontal
mounting. Offered in 600 A to 23,000 A current ratings.
Available from 1.2 kV to 34.5 kV voltage ratings. Requires
little maintenance other than periodic cleaning due to the
Type A
All bushing products are
manufactured to the
international standards
ISO 9001.
simple design and rugged construction.
Type LCRJ Bushings

Stud-type designs that are suitable for vertical and/or
horizontal mounting on power transformers. Available for
applications between 1.2kV and 25kV. Bushings rated
15kV are available in current ratings from 2900 A to
23,000 A. Requires little maintenance other than periodic
cleaning due to the simple design and rugged construction.
Particularly suitable for applications requiring low partial
discharge.
Type T, Type A, and Type LCRJ bushings electrically meet
or exceed the IEEE/ANSI standards.
Type LCRJ
C OCO
LLIIN
OO
N GG
Maintaining, updating, or replacing cooling equipment can keep

transformers operating at peak performance
Coolers:
Oil Coolers are designed and manufactured by ABB
for the transformer industry and can easily replace
existing models.
Replacement fans, motors, and valves are also
available for existing coolers.
Pump Valve
Rebuild Kit
Radiators:
Replacement Radiators can be manufactured to meet
original requirements. Bolt-on fan assemblies to
replace existing fans and motors are available.
Kits are available to rebuild the older model
Westinghouse radiator valves.
Pumps:
Replacement pumps are available.
Kits are available to rebuild the older model
Westinghouse pump valves.
Fan Assembly
for Radiator
G AU
GGEE SS
G AU
Oil Thermometers
Oil Thermometers are used to indicate the top liquid
temperature of the transformer. Internal switches can
be used to control fans and/or initiate an alarm.
Replacement kits are carried in stock.
Oil Thermometer Gauge
Winding Thermometers
Winding Thermometers are used to provide a means
of reading an equivalent of the winding hot spot
temperature. Replacement kits are carried in stock.
Oil Level
Magnetic liquid level gauges are used to indicate the
level of the insulating fluid. A magnetic float arm
positively displaces the magnetic shaft to indicate the
oil level on the gauge face.
Oil Flow
Winding Thermometer
Gauge
Oil Level Gauge
Flow gauges are used on forced-oil cooling

equipment to indicate the proper flow of the
insulating liquid during forced oil cooling operations.
D EDVE VI C
ESS
ICE
Sudden Pressure Relay
This device is designed to respond to the sudden
increase in gas pressure in a power transformer
which would be caused by an internal arc.
Nuisance trips due to pressure changes caused by
the environment are not detected.
Sudden Pressure Relay
Mechanical Relief Device

This device is designed to relieve excessive
pressure that may build up within the transformer
tank. It will protect the transformer against gradual
build up of excessive pressure.
PBA2
Mechanical Relief
Device
This device attaches via special cable to the

voltage tap of a 115kV or larger condenser
bushing. As power flows through the bushing, the
PBA2 provides output at 115 and 66.4 volts that is
commonly used to energize synchroscopes,
voltmeters, and voltage responsive relays. It is
generally an economical source of small amounts
of 115 volt power at field locations.
Breathers
Dehydrating breathers are used to prevent the
normal moisture in the air from coming in contact
with the oil in electrical equipment as the internal
pressure varies. The use of this device would
reduce the degredation of the oil and help maintain
its insulation capability. Dehydrating breathers
come in seven sizes for application on equipment
with oil volumes from 235 to 9,600 gallons. They
are filled with Silicagel which can absorb 20% of
its own weight in moisture.
PBA2
Dehydrating
Breather
D E VD IEC
V IE
CS
ES
Inertaire
This system includes all of the pressure
regulating controls needed to maintain a
positive pressure nitrogen atmosphere in the
gas space of the transformer. This nitrogen
blanket protects the transformers oil from
deterioration caused by exposure to
moisture or oxygen. When the gas space
pressure falls below the low pressure limit,
the Inertaire system automatically feeds
fresh nitrogen into the transformer gas
space until the pressure is restored to a
value above the low pressure limit. When
the pressure exceeds the high pressure
limit, the system vents the excess pressure
to the atmosphere through a relief valve.
RNB Inertaire System
ABB Power T&D Company, Inc.

Components Division
1128 Highway 412 S.
Alamo, TN 38001-3813, USA
Tel: (901) 696-5561
(800) 955-8399
Fax: (901) 696-5269
www.abb-alamo.com

Provodni Izolatori

Uploaded by

Copyright:

Available Formats

Provodni Izolatori

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Provodni Izolatori

Uploaded by

Copyright:

Available Formats

SA 44-721-1

ABB Power Transmission

UTT Contact Upgrade Kit

Contacts and Kits are carried in stock for:

Parts are also available for:

CT Junction Block Kits

CT Junction Block Kit

Electric, and Lapp, as well as other domestic manufacturers for all kV

current ratings. Available from 15kV through 34.5 kV

simple design and rugged construction.

Type LCRJ Bushings

Maintaining, updating, or replacing cooling equipment can keep

Oil Thermometer Gauge

Oil Level Gauge

Flow gauges are used on forced-oil cooling

Sudden Pressure Relay

Mechanical Relief Device

This device attaches via special cable to the

ABB Power T&D Company, Inc.

You might also like