Aop Chokes

BC, BCF, BFF,
BWF & BHF
Chokes
AOP 2/2012-SWP-D
BR-AOP-BC/BCF/BFF/BWF/BHF-CHOKES-01
BC, BCF, BFF, BWF & BHF CHOKES

CAMERON TECHNOLOGIES: AOP CHOKES
AOP chokes are general purpose chokes suitable for a
As part of a commitment to meeting customer needs,
host of applications within the oil and gas industry.
AOP chokes are stocked by a network of authorized
Based upon the proven needle and seat principle, and
distributors and are marketed worldwide through our
optimized through design, these choke products offer a
representatives.
comprehensive solution for challenging flow control

applications throughout the industry.
AOP chokes are characterized by their robust, clean design
features and rugged, easily assembled components.
They are available in pressures ratings up to 10,000 psi
and in a combination of threaded, butt-welded and
flanged interface connections. Positive or adjustable trim
configurations may also be specified.
STANDARD FEATURES
AOP threaded and flanged chokes are designed to meet or exceed todays abrasive and corrosive applications, and
incorporate the following standard features:

Adjustable and positive option
Thumbscrew secures stem position at any setting
ANSI Class 150 through 600 and ANSI Class 2000
Lube fitting enhances corrosion-resistant, smooth
through 10,000

stem operation
Adjustable models easily adaptable to positive
Adjustable models available with 3/4 maximum
configuration
orifice or 1 maximum orifice, both adjustable in
Forged or cast carbon steel body
1/64 increments
Heat-treated, hardened steel stem and seat with
100% production testing
optional stainless steel/tungsten carbide trim
Hammer lug models facilitate quick disassembly
Series BHF interchangeable with CAMERON
lug is pressure-relief vented for safe removal
H2 chokes
2/2012-SWP-D AOP
3

SERIES BC M-20 2 THREADED
SERIES BC S-20 2 THREADED
2000 psi CWP Adjustable Chokes
2000 psi CWP Adjustable and Positive Chokes
11
9-1/8
Open 3/4 orifice 23-13/16

Closed 1 orifice 24-5/32
Open 17-7/8
Closed 16-17/32
Closed 22-1/2
12-7/16
9
5-11/16
2-3/8
2-3/8
2-3/8
SERIES BC 2 THREADED X THREADED

3000 and 5000 psi CWP Adjustable and Positive Chokes
3/4 and 1 MAXIMUM ORIFICE AVAILABLE IN LOW-ALLOY STEEL,
STAINLESS STEEL OR STAINLESS STEEL/TUNGSTEN CARBIDE
9-1/8

13-1/8
Closed 23-19/32
9-1/16
2-11/16
2 NPT
9-1/16
2-11/16
AOP 2/2012-SWP-D
2 NPT

SERIES BCF 2 THREADED X FLANGED
3000 and 5000 psi CWP Adjustable and Positive Chokes
9-1/8


Closed 23-19/32
14-1/8
9-1/4
9-1/4
7-1/2
2 NPT
7-1/2
2 NPT
SERIES BFF 2-1/16 FLANGED X FLANGED

API 2000 and 5000 Adjustable and Positive Chokes
-9-1/8


Closed 24-13/16
14-1/8
9-3/8
9-3/8
7-1/2
7-1/2
Flanges conform to
appropriate class
specifications
2/2012-SWP-D AOP
5

SERIES BWF 1-13/16 AND 2-1/16 FLANGED X FLANGED
API 10,000 Adjustable and Positive Chokes
9-1/8

16-9/32
Closed 21-19/32
9-3/8
9-3/8
7-1/2
7-1/2
SERIES BHF 3-1/8 7-1/16 FLANGED X FLANGED

API 2000 Through 10,000 Adjustable and Positive Chokes
2 MAXIMUM ORIFICE AVAILABLE IN LOW-ALLOY STEEL,
14
Open 32-7/8
Closed 29-7/8
18-5/8
11-3/8
11-3/8
8-7/8
8-7/8
CUSTOM DIMENSIONS AVAILABLE CONSULT FACTORY
AOP 2/2012-SWP-D

SERIES BC/BFF INSTALLATION, OPERATION AND MAINTENANCE
16
17
15
BC
1
14
12
10
11
BFF
10
2
7
3
9
Installation
Operation
AOP chokes are shipped with indicator (12) loose. Install

choke in system using proper size mating flanges or threaded
end connections and appropriate gasket seal rings or thread
sealant. Rectangular indicator window may be relocated for
more convenient reading by loosening hammer lug nut (11)
and rotating bonnet (2) as desired.
CAUTION: Choke must be in open position and internal
system pressure MUST BE BLED TO ZERO PSI prior to making
this adjustment. Retighten hammer lug nut. Turn handwheel
(15) clockwise until choke is in closed position. With choke
closed, turn indicator (12) until CLSD is positioned directly
above rectangular opening in the bonnet (2). Indicator set
screw (14) now will be accessible through round window in
the side of bonnet. Tighten set screw. Indicator is now set.
As the choke is opened, numbers will appear in the

rectangular window, indicating the equivalent orifice setting
of the choke, in 1/64. Once the choke has been set at the
desired orifice size, thumbscrew (4) should be tightened to
secure that setting. Flow may now be opened through the
choke. Should further adjustment be necessary, simply loosen
the thumbscrew, turn the handwheel in the direction needed
to correct the flow, then re-tighten the thumbscrew.
2/2012-SWP-D AOP
7

SERIES BC/BFF INSTALLATION, OPERATION AND MAINTENANCE
Maintenance
Reassembly
Routine maintenance on AOP chokes consists of periodic

injection (once a month is adequate) of grease through the
lube fitting (3). In the event major service or rebuild is
required, the stem (7), seat (10), stem packing and bonnet
seal (6) may be replaced without removing the choke body
from the piping system.
CAUTION: If the choke is to be disassembled while installed
in a piping system, it must be isolated from the system
pressure and flow. With the choke at an open setting,
internal pressure must be bled to zero PSI.
Assemble the stem/bonnet/packing sub-assembly by placing

the seal rings (lips toward point of stem) and the steel
packing junk ring on the stem. Note: 1 orifice chokes
require that the packing and junk ring be installed from the
threaded end of the stem. Use of grease on the stem will
facilitate moving these parts over the threads to their proper
location, just behind the point of the stem. Take care that the
packing is installed with the junk ring closest to the point of
the stem, followed by the seal rings. Screw the bonnet and
stem together and seat the packing junk ring in the stuffing
box, exposing the retainer ring in groove. Reassemble other
components in reverse order of assembly. After assembly is
complete, inject several pumps of grease through lube fitting,
and re-calibrate indicator per the Installation and Operation
Instructions.
Disassembly
Loosen nut (16) and set screw (14). Then, remove handwheel
(15), indicator (12), thumbscrew (4) and thread lock protector
(5). Loosen lug nut (11) with hammer blows (turn counterclockwise looking into handle-end of stem) and remove nut
and bonnet (2), stem (7), and packing (8) as an assembly. To
disassemble the stem from this assembly, screw the bonnet
off the stems square end. When the threads become
disengaged, pull the stem and bonnet apart. Remove stem
packing retainer from the bonnet and pry out the steel junk
ring and packing rings with a screwdriver (be careful not to
damage stuffing box bore in bonnet). Finally, remove seat
(10) from the body using a common 3 orifice choke seat
wrench. Clean and inspect bonnet seal (6) and all other
components for wear and corrosion. Discard and replace all
questionable parts.
AOP 2/2012-SWP-D

REPLACEMENT PARTS
A complete line of replacement parts are manufactured for all AOP chokes. Available replacement parts include:
Individual Parts:
Bonnet Assemblies Include:
Seats
Bonnet
Stems
Stem
Bonnets
Indicator
Blanking caps
Handwheel
Cage nipples
Seals and fittings
Hammer lug nuts
Lug nut (optional)
Packing assemblies
Flow beans
Bean wrenches
Adaption Kits Include:

(For converting adjustable chokes to positive)
Blanking cap
Retainer
Seal
Lug nut
Flow bean (optional)
2/2012-SWP-D AOP
9

REPLACEMENT PARTS
A complete line of replacement parts are manufactured for all AOP chokes. Available replacement parts include:
Ceramic Lined Carbon Steel Flow Beans:
10
SIZE
PART NUMBER
SIZE
PART NUMBER
4/64
16-00-0610
27/64
16-00-0633
5/64
16-00-0611
28/64
16-00-0634
6/64
16-00-0612
29/64
16-00-0635
7/64
16-00-0613
30/64
16-00-0636
8/64
16-00-0614
31/64
16-00-0637
9/64
16-00-0615
32/64
16-00-0638
10/64
16-00-0616
33/64
16-00-0639
11/64
16-00-0617
34/64
16-00-0640
12/64
16-00-0618
35/64
16-00-0641
13/64
16-00-0619
36/64
16-00-0642
14/64
16-00-0620
37/64
16-00-0643
15/64
16-00-0621
38/64
16-00-0644
16/64
16-00-0622
39/64
16-00-0645
17/64
16-00-0623
40/64
16-00-0646
18/64
16-00-0624
41/64
16-00-0647
19/64
16-00-0625
42/64
16-00-0648
20/64
16-00-0626
43/64
16-00-0649
21/64
16-00-0627
44/64
16-00-0650
22/64
16-00-0628
45/64
16-00-0651
23/64
16-00-0629
46/64
16-00-0652
24/64
16-00-0630
47/64
16-00-0653
25/64
16-00-0631
48/64
16-00-0654
26/64
16-00-0632
AOP 2/2012-SWP-D
2/2012-SWP-D AOP
11
Aghafad, Longford
11331 Tanner Road
Republic of Ireland
Houston, Texas 77041-6901
Tel 353.43.3350600
Tel 713.280.3000
Fax 353.43.3341560
Fax 713.280.305
Email sales@aopind.com
www.c-a-m.com
Copyright All rights reserved. Printed in USA 2/2012
Email sales@aopind.com
www.aopind.com

Aop Chokes

Uploaded by

Copyright:

Available Formats

Aop Chokes

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Aop Chokes

Uploaded by

Copyright:

Available Formats

BC, BCF, BFF,

BWF & BHF

BC, BCF, BFF, BWF & BHF CHOKES

As part of a commitment to meeting customer needs,

host of applications within the oil and gas industry.

AOP chokes are stocked by a network of authorized

Based upon the proven needle and seat principle, and

distributors and are marketed worldwide through our

optimized through design, these choke products offer a

comprehensive solution for challenging flow control

Adjustable and positive option

Thumbscrew secures stem position at any setting

ANSI Class 150 through 600 and ANSI Class 2000

Lube fitting enhances corrosion-resistant, smooth

Adjustable models easily adaptable to positive

Adjustable models available with 3/4 maximum

orifice or 1 maximum orifice, both adjustable in

Forged or cast carbon steel body

Heat-treated, hardened steel stem and seat with

100% production testing

optional stainless steel/tungsten carbide trim

Hammer lug models facilitate quick disassembly

Series BHF interchangeable with CAMERON

lug is pressure-relief vented for safe removal

BC, BCF, BFF, BWF & BHF CHOKES

SERIES BC S-20 2 THREADED

2000 psi CWP Adjustable Chokes

2000 psi CWP Adjustable and Positive Chokes

Open 3/4 orifice 23-13/16

SERIES BC 2 THREADED X THREADED

Open 3/4 orifice 24-29/32

BC, BCF, BFF, BWF & BHF CHOKES

3/4 and 1 MAXIMUM ORIFICE AVAILABLE IN LOW-ALLOY STEEL,

Open 3/4 orifice 24-29/32

SERIES BFF 2-1/16 FLANGED X FLANGED

3/4 and 1 MAXIMUM ORIFICE AVAILABLE IN LOW-ALLOY STEEL,

Open 3/4 orifice 26-5/32

BC, BCF, BFF, BWF & BHF CHOKES

Open 3/4 orifice 22-29/32

SERIES BHF 3-1/8 7-1/16 FLANGED X FLANGED

CUSTOM DIMENSIONS AVAILABLE CONSULT FACTORY

BC, BCF, BFF, BWF & BHF CHOKES

AOP chokes are shipped with indicator (12) loose. Install

As the choke is opened, numbers will appear in the

BC, BCF, BFF, BWF & BHF CHOKES

Routine maintenance on AOP chokes consists of periodic

Assemble the stem/bonnet/packing sub-assembly by placing

BC, BCF, BFF, BWF & BHF CHOKES

Bonnet Assemblies Include:

Seals and fittings

Hammer lug nuts

Lug nut (optional)

Adaption Kits Include:

Flow bean (optional)

BC, BCF, BFF, BWF & BHF CHOKES

Ceramic Lined Carbon Steel Flow Beans:

11331 Tanner Road

Houston, Texas 77041-6901

You might also like

ANSI Class 150 through 600 and ANSI Class 2000

Lube fitting enhances corrosion-resistant, smooth

Adjustable models easily adaptable to positive

Adjustable models available with 3/4 maximum

Heat-treated, hardened steel stem and seat with

Hammer lug models facilitate quick disassembly

Series BHF interchangeable with CAMERON

Seals and fittings

Hammer lug nuts

Lug nut (optional)

Flow bean (optional)