Streetlight Pole Boq

BOQ Addendum-1
CE/UD/T-24
SHIFTING & MODIFICATION OF STREET LIGHT POLES, HIGH MAST OF MUNICIPAL

CORPORATION BAHADURGARH FOR MUNDKA- BAHADURGARH CORRIDOR (HARAYANA
PORTION) OF DELHI MRTS PHASE - III.
S. NO.
DESCRIPTION OF MATERIALS
UNITS
BOQ
QTY.
Survey and designing of lighting layout plan/location of poles

and High Masts etc by professionals like Bajaj, Philips,
Keselec, etc to achieve required lux level as per norms as per
BOQ.
Job
Casting of open raft shallow RCC foundation of High Mast 20/30

mtr suitable for safe soil bearing capacity of10 T/sq. mtr. Including
foundation bolts manufactured from special steel along with nuts
washer and suitable size of anchor plate and template.
No.
Dismantling the existing High Mast tower system with all fitting
accessories with modern equipment along with existing cables.
and es with all accessories and keep in contractor's safe custody
and restoration of central verge / footpath and removal of surplus
malb
No.
Erection and commissioning of the High Mast System with help of

modern engineering practices with existing light. Installation fitting
after making good as required.
No.
All Hardware set required for High Mast
Set
Supply at site and providing wire mesh fencing work all around of
high mast as per standard design .
Sq. feet
140
Set
50.00
Set
50.00
Mtrs
12000
No.
115
SITC of Earthing with G.I. Earth pipe 3 m long , 40mm dia

including the cost of accessories and providing masonry
with cover plate having locking arrangement and watering
pipe etc (But without charcoal & coke and salt) complete as
reqd.
Extra for using charcoal and salt for pipe earth electrode as
reqd.
Providing and fixing of 6 SWG dia GI wire on surface or in recess
for loop earthing as required at site.
10
Supply & Erection of 9mtr long hot dip galvanised
octagonal poles with 155 mm 200 mm bottom A/F & 70
mm
100 mm top A/F made up of 3mm the. HT sheet
along with base plate of size 260X260X16mm
320X320X20 mm with maximum wind speed of 169 Km/
hr.as required. including the cost supplying fixing of the
following of the window box provided for cable termination:a) Supplying and fixing 6mm thick laminated mounted
sheet inside the window mounted on and i/c providing and
welding 3 nos. GI strips 4mm thick of suitable length having
suitable size tapped holes as reqd.
b) Supplying and Fixing of 63 amp terminal block suitable
for 25 sq mm conductor - 4 nos. & shorting links on DIN
channel i/c pdg and fixing DIN channel of suitable length - 2
nos. on the existing laminated sheet.
c) Supplying and fixing 4 amp. SPMCB 'C' Characteristics
curve - 1nos. Earth stud - 2 nos. Welded at suitable height
with two nos. washers, springs washers & nuts.
d) Cable support clamp suitable for 4nos of 4 x 25 sq mm
cable i/c supplying and drawing following size of 3 x 2.5 sq.
mm PVC insulated copper conductor, multicore cable in
existing pole and bracket from cable termination copper lugs
connecting, etc as reqd.
(As Per Drawing attached)
Signature of Tenderer
Date:
Seal of Company
1 of 3
RATE (RS.)
AMOUNT (RS.)
BOQ Addendum-1
CE/UD/T-24
S. NO.
UNITS
BOQ
QTY.
11
Supply and fixing 4 nos 25 mm dia x 700 mm 750 mm

Long foundation bolts with nuts, washer including 2 mm dia
holes to match with PCD of pole base plate as reqd for 9/10
mtr pole.
Set
210
12
Supply at site & making foundation for 9 Meter octagonal pole as

per specification.
No.
210
13
No.
115
14
S/I/T/C of "designer" galvanized and PU painted U type single arm

bracket. The item shall be similar as already provided at site and ,
complete with tightening bolts, etc.
Supplying and laying double walled corrugated (DWC) High
Density poly ethylene (HDPE) pipe of following size having
corrugation on the outer wall and plain surface on inner wall
confirming to IS : 14930 (part I & II), 0.7 mtr below the ground
level including excavation, refilling the trench etc as required.
15
90 mm outer dia nominal size
16
120mm outer dia nominal size.

Providing, boring and laying HDPE pipes (ISIm marked) of
following size conforming to IS: 4984-1995 with pressure rating of
4 kg/sq cm by trench les technology
Mtrs
Mtrs
6500
200
Mtrs
Mtrs
700
300
Mtrs
Mtrs
8000
500
Nos.
providing temporary barracking including arrangement of

traffic division such as traffic signals during construction at
site for day and night, reflective signs red colour lights,
required number of traffic marshals, marking flags etc .
shifting and RE-fixing in position as per the directions of the
Engineer-in charge, i/c all incidentals, labour materials,
equipments and works required to execute the job.
Mtrs
140
Shifting of outdoor type cubical feeder pillar from old place

to new place with all foundation etc and testing
commissioning as required.
Nos.
Conversion of existing double arm bracket to single arm

bracket and PU painting etc as required.
No.
95
No.
95
17
18
19
20
21
22
23
24
25
26
27

supply and laying of XLPE insulated PVc sheathed A1. cond.
Armoured cable of 1.1 KV grade conforming to IS: 7098 part - 1 of
following size.
4C x 25 sqmm
4C x 50 sqmm
Fabrication, supplying & installation of outdoor type cubical feeder

pillar of suitable with following:- Supplying & fixing of following
accessories in the existing cubical panel board/feeder pillar
including connection , testing etc. As reqd.
a) 125 amp. 25KA MCCB-4 pole - 1 no.
b) 95 amp. power contractor - 1 no.
c) 100 amp. 16KA MCCB - 4 pole - 6 nos.
d) KW meter 96 mm 0-50 KW flush type - 1 no.
e) Voltmeter 0-500V 96mm flush type with selector switch - no.1
f) Ammetr 0-100 AMP. 96mm flush type with selector switch and
100/5 Amp. CTs - 1 no.
g) Indictor lamps (RYB) with control HRC fuse - 1 set
h) Astro Timer ( three phase having compatibility with GCM
modern) - 1 no.
i) Danger plate - 1 no.
j) Space for installation of three phase CT operated energy metre
for recording energy consumption.
Erection, Testing & Commissioning of new/ old 9 M octagonal

pole, bracket arm, luminaries, with all accessories like MCB, wire
etc. complete as required or with using of brackets and clamps to
make the complete base for pole load.
Date:
Seal of Company
2 of 3
RATE (RS.)
AMOUNT (RS.)
BOQ Addendum-1
CE/UD/T-24
UNITS
BOQ
QTY.
Removal of old lighting poles with all accessories and keep

in contractor's safe custody and restoration of central verge
/ footpath and removal of surplus malba.
Nos.
95
Supply, Installation, Testing & Commissioning of road way

luminaries "JET" IP 66 Single piece die cast aluminium with full
frame of HPSV T 150 W Lamp and its accessories. Similar to
existing site.
Nos.
Nos.
20
Nos.
Nos.
30
Nos.
40
1500
No.
Set
No.
No.
S. NO.
28
29
30

luminaries "JET" IP 66 Similar to Bajaj Cat No BRSGL 250
SV/MH Single piece die cast aluminium with full frame and HPSV
T 250 W Lamp and its accessories Similar to existing site.
(Drawing Enclosed)
31
32

luminaries "JET" IP 66 Single piece die cast aluminium with full
frame HPSV T 400 W Lamp and its accessories Similar to
existing site
S/I/T/C of 63 amp terminal block with 4 amp. SPMCB 'C'
Characteristics curve - 1nos. Earth stud - 2 nos. Welded at
suitable height with two nos. washers, springs washers & nuts
suitable for 25 sq mm conductor - 4 nos. & shorting links on DIN
channel i/c pdg and fixing DIN channel of suitable length - 2 nos.
on the existing laminated sheet.
NOTE:- To be Fixed in old 9 mtr pole where ever missing.
33
Rectification of old defective light fixture including lamp, ballast etc
34
Digging of trench in hard soil / pukka for cable laying

Supply at site of 12 meter long hot dip galvanised octagonal poles
with 240 mm bottom A/F& 90mm top A/F made up of 3mm thick
HT sheet along with base plate of size 320x320x20mm with
maximum wind speed of 169KM/hr.
35
36
37
38
Supply and fixing 4 nos 25 mm dia x 850 mm long

foundation bolts with nuts, washer including 2 mm dia holes
to match with PCD of pole base plate as reqd for 12mtr
pole.
Supply at site of 1500mm Single arm bracket made up of 48mm
dia GI pipe suitable for 11M / 12M poles
Supply at site & making foundation for 12 Meter octagonal pole.
Total Amount (Rs. )
Schedule (B)
1
Credit for old complete bracket arm released from old poles.
Each
Released old cable 4Cx 25 sqmm in scrap.
Mtrs
2000
Credit for released unusable MS/GI Poles and including fittings
No.
Total of Sch.(B)
Amount Sch.(A-B)
Grand Total Amount in Figures (Rs.)
Grand Total Amount in Words (Rs.)
.
Date:
Seal of Company
3 of 3
RATE (RS.)
AMOUNT (RS.)

Streetlight Pole Boq

Uploaded by

Copyright:

Available Formats

Streetlight Pole Boq

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Streetlight Pole Boq

Uploaded by

Copyright:

Available Formats

BOQ Addendum-1

SHIFTING & MODIFICATION OF STREET LIGHT POLES, HIGH MAST OF MUNICIPAL

Survey and designing of lighting layout plan/location of poles

Casting of open raft shallow RCC foundation of High Mast 20/30

Erection and commissioning of the High Mast System with help of

All Hardware set required for High Mast

SITC of Earthing with G.I. Earth pipe 3 m long , 40mm dia

(As Per Drawing attached)

Supply and fixing 4 nos 25 mm dia x 700 mm 750 mm

Supply at site & making foundation for 9 Meter octagonal pole as

S/I/T/C of "designer" galvanized and PU painted U type single arm

90 mm outer dia nominal size

120mm outer dia nominal size.

providing temporary barracking including arrangement of

Shifting of outdoor type cubical feeder pillar from old place

Conversion of existing double arm bracket to single arm

120mm outer dia nominal size.

Fabrication, supplying & installation of outdoor type cubical feeder

Erection, Testing & Commissioning of new/ old 9 M octagonal

Removal of old lighting poles with all accessories and keep

Supply, Installation, Testing & Commissioning of road way

Supply, Installation, Testing & Commissioning of road way

Supply, Installation, Testing & Commissioning of road way

Rectification of old defective light fixture including lamp, ballast etc

Digging of trench in hard soil / pukka for cable laying

Supply and fixing 4 nos 25 mm dia x 850 mm long

Total Amount (Rs. )

Released old cable 4Cx 25 sqmm in scrap.

Credit for released unusable MS/GI Poles and including fittings

You might also like