Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 148 views

    Graphit 33

    Uploaded by

    Manuel Armindo Ribeiro
    GRAPHIT 33 is a conductive graphite lacquer with a thermoplastic binder and graphite powder. It provides good electrical conductivity and release properties. The lacquer can be applied by aerosol or spray gun. It adheres well to metals, plastics, glass and wood. GRAPHIT 33 is used to divert electrostatic discharge and as a high-temperature release agent for applications like molds. It dries quickly and leaves a black, conductive graphite film with surface resistivity of 1000-2000 Ω.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Graphit 33

    Uploaded by

    Manuel Armindo Ribeiro
    148 views2 pages
    GRAPHIT 33 is a conductive graphite lacquer with a thermoplastic binder and graphite powder. It provides good electrical conductivity and release properties. The lacquer can be applied by aerosol or spray gun. It adheres well to metals, plastics, glass and wood. GRAPHIT 33 is used to divert electrostatic discharge and as a high-temperature release agent for applications like molds. It dries quickly and leaves a black, conductive graphite film with surface resistivity of 1000-2000 Ω.

    Original Description:

    Grafite de lubrificação

    Original Title

    GRAPHIT 33

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    GRAPHIT 33 is a conductive graphite lacquer with a thermoplastic binder and graphite powder. It provides good electrical conductivity and release properties. The lacquer can be applied by aerosol or spray gun. It adheres well to metals, plastics, glass and wood. GRAPHIT 33 is used to divert electrostatic discharge and as a high-temperature release agent for applications like molds. It dries quickly and leaves a black, conductive graphite film with surface resistivity of 1000-2000 Ω.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    148 views2 pages

    Graphit 33

    Uploaded by

    Manuel Armindo Ribeiro
    GRAPHIT 33 is a conductive graphite lacquer with a thermoplastic binder and graphite powder. It provides good electrical conductivity and release properties. The lacquer can be applied by aerosol or spray gun. It adheres well to metals, plastics, glass and wood. GRAPHIT 33 is used to divert electrostatic discharge and as a high-temperature release agent for applications like molds. It dries quickly and leaves a black, conductive graphite film with surface resistivity of 1000-2000 Ω.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    TECHNICAL DATA SHEET

    1/2

    GRAPHIT 33
    Ref. : 20760

    1. GENERAL DESCRIPTION
    Graphite lacquer for conductive coatings. Thermoplastic binder with electrically conductive
    graphite powder.
    2. FEATURES
    GRAPHIT 33 contains a high level of pure and fine graphite powder. This results in a good
    electrical conductivity, as well as gliding and release agent properties of the graphite
    lacquer. The coating exhibits good adhesion on metal, many plastics, glass and wood.
    3. APPLICATIONS
    As a conductive coating for permanent and safe diverting of electrostatic discharges (ESD)
    Backs of cathode rag tubes
    Electroplating of non-conductive materials
    ESD safe packages
    Repair of graphite-coated pcbs in keyboard switches (e.g. remote controls)
    To firm the ESD protection of packaging and conveyor tube equipment.
    As sliding coating for permanent, temperature resistant, dry sliding coating.
    As high-temperature release agent : conductive protective release coating for high-voltage
    contacts, high-temperature release agent, e.g. for moulds used for the sintering of abrasive
    agents in abrasive discs.
    Optical applications : the dark black colour makes GRAPHIT 33 suitable as an absorbent
    coating in for example laser applications.
    4. DIRECTIONS
    When relative small amounts are involved, the easiest way to apply GRAPHIT 33 is to spray
    from an aerosol can. Shake can thoroughly before use. Spray, from a distance of 20-30 cm
    onto the dry and degreased surface. After use, always clean button by spraying upside-down
    until only gas escapes.
    When larger amounts are needed, GRAPHIT 33 can be applied by spraying using
    commercial spray guns. Before use, stir vigorously (best for 10 minutes with propeller
    agitator). As diluent we do recommend isopropanol e.g. our product THINNER for
    KONTAFLON 85. During use, shake or stir at regular intervals.
    The surface resistivity can be further reduced by heating at 90C (1 hour) or by polishing with
    a cloth or swab. Polishing makes also the weak graphite layer more firm. At temperatures
    above 100C the binding agent will decompose. Nevertheless a good adhering graphite film
    remains that can be used as e.g. release coating.

    Manufactured by :

    CRC Industries Europe NV


    Touwslagerstraat 1 9240 Zele Belgium
    Tel (32) (0) 52/45.60.11 Fax (32) (0) 52/45.00.34
    www.crcind.com

    TECHNICAL DATA SHEET


    2/2

    GRAPHIT 33
    Ref. : 20760

    When GRAPHIT 33 is used in vacuum equipment, the lacquer must be heated on forehand.
    When using GRAPHIT 33 ensure that there is good ventilation. Remove all sources of
    ignition.

    A safety data sheet (MSDS) according to EU directive 91/155/EEC and amendments is


    available for all CRC products.

    5. TYPICAL PRODUCT DATA (without propellant)


    Flashpoint
    Aerosol
    Bulk
    Coverage calculated (20m thickness)
    Aerosol
    Bulk
    Drying time at room temperature

    :
    :

    <0C
    11C

    :
    :
    :

    0.3m/200 ml can
    4m/l
    tack-free <20 min.
    cured 4 hours

    Dry film properties


    Colour
    : black
    Temperature resistance of lacquer
    : 90C
    Temperature resistance of graphite film
    : 250 - 300C
    Surface resistivity
    : 1000-2000
    (depending on coating thickness, method of application and drying conditions)
    6. PACKAGING
    aerosol: 12 x 200 ml ; 12 x 400 ml
    bulk: 1 Lt; 15 Lt
    All statements in this publication are based on service experience and/or laboratory testing. Because of the wide
    variety of equipment and conditions and the unpredictable human factors involved, we recommend that our
    products be tested on-the-job prior to use. All information is given in good faith but without warranty neither
    expressed nor implied.
    This Technical Data Sheet may already have been revised at this moment for reason such as legislation,
    availability of components and newly acquired experiences. The latest and only valid version of this Technical
    Data Sheet will be sent to you upon simple request or can be found on our website: www.crcind.com.
    We recommend you to register on this website for this product so you will be able to receive any future updated
    version automatically.
    Version
    Date

    : 20760 03 1003 03
    : 18 October 2004

    Manufactured by :

    CRC Industries Europe NV


    Touwslagerstraat 1 9240 Zele Belgium
    Tel (32) (0) 52/45.60.11 Fax (32) (0) 52/45.00.34
    www.crcind.com

    You might also like