STJLR 01 5070

Jaguar Land Rover Limited - Engineering Standard
Title: Wiper Condition at Park and Out Wipe
INDEX
A
B
C
D
E
F
G
H
Z
Index
Scope
Object
Review
Related Documents
Requirements
Optional additional sections
Optional additional sections
Change History
Appendix A
B
Standard: STJLR.01.5070
Issue: 2
Date: 07 August 2013
Page: 1 of 4
Quick Reference Guide
SCOPE
This standard is applicable to the front wiper system of all JLR vehicles.
OBJECT
To define windscreen wiper pattern with respect to park and out wipe conditions. This standard
states requirements, over and above legal minimums.
REVIEW
This document must be reviewed at least every three years from the date of the last review or
update.
RELATED DOCUMENTS
WW-7008 Wiper Condition At Park And Out Wipe
REQUIREMENTS
The wipe patterns must meet legal wiped area requirements.
The following assessment is against a theoretical nominal wipe, i.e. wiper speed one, vehicle
static, with a wet screen.
This document is approved for use by Jaguar Land Rover Limited

Prepared by: Alistair Hill
cdsid: ahill17
Printed copies are uncontrolled
Authorised by: Stephen Garratt

cdsid: sgarratt
Official Record Series 25.01, Jaguar Land Rover Limited

3
Issue: 2
Page: 2 of 4
Wipe condition must be assessed against the following requirements at A-post, park and peak:
3.1 At the A-post the wiper blade or wiper blades are to be parallel 6 to a chord line through
the windscreen obscuration line as shown in figure 1 (see appendix).
3.2 At the A-post the wiper blade or wiper blades outer tip are to be a reference of 61 mm from
the A-post figure 1 (see appendix) to allow pattern over wipe to be calculated and dynamic
clearance requirement to then be confirmed.
3.3 At park the wiper blade or wiper blades are to be parallel 6 to a chord line through the
windscreen obscuration line as shown in figure 1 (see appendix).
3.4 At the cowl the wiper blade or wiper blades outer tip is to be a minimum of 51 mm from the
cowl trim as shown figure 1 (see appendix) to allow pattern over wipe to be calculated and
dynamic clearance requirement to then be confirmed.
3.5 Wiper blade or wiper blades are to park within windscreen solid black obscuration pattern with
no part of the wiper arm and blade assembly being visible above the solid black windscreen
obscuration line when observed in car line x view.
3.6 When the windscreen wiper system consists of more than one arm and blade assembly, the
wiper blades at park must be:
3.6.1
A maximum angle of 24 to each other.
3.6.2
A maximum distance of 35 mm from wiper blade tip / heel to opposing wipe arc where
blades meet.
3.6.3
Within a zone 20 mm of the opposite blade.
as shown in figure 2 (see appendix).

3.7 When the windscreen wiper system consists of two arm and blade assemblies from a central
and an outboard wiper spindle position, the arc of the central wiper shall overlap the arc of the
outboard wiper by a minimum of 10 mm as shown in figure 3 (see appendix).
3.8 When the windscreen wiper system consists of more than one arm and blade assembly, the
highest point of each blade arc must be designed within 15 mm of each other as shown in
figure 4 (see appendix).
CHANGE HISTORY
Issue
1
2
Date
17 Nov 2011
7 Aug 2013
Description of Change
First issue
Chord line and car line x view
Wiper blade at park requirements revised.
requirements
consolidated.

APPENDIX A
Issue: 2
Page: 3 of 4
Quick Reference Guide
Wiper blades are to

be parallel 6 to
windscreen
obscuration line.
Wiper blades are

to be parallel 6
to windscreen
obscuration line.
Wiper blades outer

tip to be a minimum
of 51 mm from the
A-post.
Wiper blades outer

tip to be a
minimum of 51 mm
from the cowl trim.
Figure 1. Wiper blade at A-post
Blade tip within

20 mm offset
of opposing
blade
Wiper blade tip to

be max 35 mm to
opposing arc of
Wiper blades are
wipe
to be max 24 to
each other
Figure 2. Wiper blade at park
Issue: 2
Page: 4 of 4
10 mm
Figure 3. Wiper arc peak condition
Highest point of
each blade arc
must be designed
within 15 mm of
each other.
Figure 4. Wiper arc height measurement

STJLR 01 5070

Uploaded by

Copyright:

Available Formats

STJLR 01 5070

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

STJLR 01 5070

Uploaded by

Copyright:

Available Formats

What are the requirements for wiper blade positioning at the A-post?

What are the requirements for wiper blade positioning at the A-post?

What are the requirements when the windscreen wiper system consists of more than one arm and blade assembly?

What are the requirements when the windscreen wiper system consists of more than one arm and blade assembly?

Jaguar Land Rover Limited - Engineering Standard

Title: Wiper Condition at Park and Out Wipe

Quick Reference Guide

The wipe patterns must meet legal wiped area requirements.

This document is approved for use by Jaguar Land Rover Limited

Printed copies are uncontrolled

Authorised by: Stephen Garratt

Official Record Series 25.01, Jaguar Land Rover Limited

Jaguar Land Rover Limited - Engineering Standard

Title: Wiper Condition at Park and Out Wipe

A maximum angle of 24 to each other.

Within a zone 20 mm of the opposite blade.

as shown in figure 2 (see appendix).

Printed copies are uncontrolled

Official Record Series 25.01, Jaguar Land Rover Limited

Jaguar Land Rover Limited - Engineering Standard

Title: Wiper Condition at Park and Out Wipe

Quick Reference Guide

Wiper blades are to

Wiper blades are

Wiper blades outer

Wiper blades outer

Figure 1. Wiper blade at A-post

Blade tip within

Wiper blade tip to

Figure 2. Wiper blade at park

Printed copies are uncontrolled

Official Record Series 25.01, Jaguar Land Rover Limited

Jaguar Land Rover Limited - Engineering Standard

Title: Wiper Condition at Park and Out Wipe

Figure 3. Wiper arc peak condition

Figure 4. Wiper arc height measurement

Printed copies are uncontrolled

Official Record Series 25.01, Jaguar Land Rover Limited

You might also like