D 100017 X 012
D 100017 X 012
D 100017 X 012
ED Valve
51.1:ED
December 2012
D100017X012
W1916-3
FGM gaskets
quick-opening
linear
equal percentage
www.Fisher.com
Product Bulletin
ED Valve
51.1:ED
December 2012
D100017X012
Features
Table of Contents
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
ENVIRO-SEAL Packing System Specifications . . . . . . . 5
C-seal Trim Description . . . . . . . . . . . . . . . . . . . . . . . . 9
ENVIRO-SEALt and HIGH-SEAL
Packing Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Tables
C-seal Shutoff Classification . . . . . . . . . . . . . . . . . . . . 8
Available Constructions . . . . . . . . . . . . . . . . . . . . . . . . 9
Typical Combinations of Metal Trim Parts . . . . . . . . 10
WhisperFlo Metal Trim Part Materials
and Valve Body/Trim Temperature
Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
14
17
18
18
19
20
20
22
Product Bulletin
ED Valve
51.1:ED
December 2012
D100017X012
Specifications
Available Configurations
ED: Single-port, globe-style control valve with cage
guiding, balanced valve plug, and push-down-to-close
valve plug action (figure 1)
EAD: Angle version of ED control valve, used to
facilitate piping or in applications where a
self-draining valve is desired (figure 2)
EDR: Same as ED control valve except with
push-down-to-open valve plug action (figure 3)
Valve Sizes
See table 2
End Connection Styles(1)(2)
Cast Iron Valves
Flanged: ED, NPS 1 through 8, J CL125 flat-face or
J CL250 raised-face flanges per ASME B16.1
Steel and Stainless Steel Valves
Flanged: J CL150, 300, or 600 raised-face (RF) or
ring-type joint (RTJ) flanges per ASME B16.5,
J Raised-face (RF) flanges per EN1092-1/B
Screwed or Socket Welding: NPS 1 through 2,
consistent with ASME B16.11
Buttwelding: NPS 1 through 8
Schedules 40 or 80 consistent with ASME B16.25
Construction Materials
Valve Body, Bonnet, and Bonnet Spacer or Bottom
Flange, if used: J Cast iron, J WCC carbon steel,
J CF8M (cast 316 stainless steel), J LCC carbon
steel, J WC9 chrome moly steel, or J other
materials upon request
Valve Plug, Cage, and Metal Seating Parts
All Valves Except Those with Whisper Trim III and
WhisperFlo Cages: See table 3
Valves with Whisper Trim III and WhisperFlo Cages (NPS
4 and 6 ED): See tables 4 and 5
Valves for NACE Specification: See table 10
Bellows Seal Assembly: J 316L stainless steel or
J N04400
All Other Parts: See table 6
Product Bulletin
ED Valve
51.1:ED
December 2012
D100017X012
Specifications (continued)
Material Temperature Capabilities(2)
Valve Body/Trim Combinations
All Valves Except Those with Whisper Trim III and
WhisperFlo Cages: See table 7
Valves with Whisper Trim III Cages (NPS 6 ED): See table
4
Valves with WhisperFlo Cages (NPS 4 and 6 ED): See
table 5
All Other Parts: See table 6
Flow Characteristics
Standard Cages: J Quick-opening, J linear, or
J equal percentage
Whisper Trim and WhisperFlo Cages: Linear
Flow Directions
ED or EAD: J Standard Cage--Normally down,
J Whisper Trim and WhisperFlo CagesAlways up
EDR: J Standard Cage--Normally up, J Whisper Trim
CageAlways down
Flow Coefficients and Noise Level Prediction
See table 9 and Catalog 12
Port Diameters and Valve Plug Travels
See table 11
Yoke Boss and Stem Diameters
See table 11
Typical Bonnet Styles
J Plain or J extension. See figures 13 and 14 for
standard dimensions. See table 8 for selection
guidelines
J ENVIRO-SEAL bellows seal bonnet. See figure 13 for
standard dimensions
1. EN (or other) ratings and end connections can usually be supplied; consult your Emerson Process Management sales office.
2. The pressure/temperature limits in this bulletin and in any applicable standard limitations should not be exceeded.
3. Certain bonnet bolting material selections may require a CL600 easy-e valve assembly to be derated. Contact your Emerson Process Management sales office for more information.
4. Limitation based on excessive noise increases if max nP/P1 ratio for a given cage level is exceeded.
ED Valve
D100017X012
Product Bulletin
51.1:ED
December 2012
V-ring
Anti-Extrusion Washer: Filled PTFE
Lantern Ring: S31600 (316 stainless steel)
Spring: J 17-7PH stainless steel or J N06600
Packing Box Flange: S31600
Packing Follower: S31600 lined with carbon-filled PTFE
Packing Box Studs: Strain-hardened 316 stainless steel
Packing Box Nuts: 316 stainless steel SA194 Grade 8M
Graphite ULF Packing Systems
Packing Ring: Graphite rings
Spring: J 17-7PH stainless steel or J N06600
Packing Box Flange: S31600
Packing Follower: S31600 lined with carbon-filled PTFE
Packing Box Studs: Strain-hardened 316 stainless steel
Packing Box Nuts: 316 stainless steel SA194 Grade 8M
1. Refer to the valve specifications in this bulletin for pressure/temperature limits of valve parts. Do not exceed the pressure/temperature rating of the valve. Do not exceed any applicable code
or standard limitation.
2. The Environmental Protection Agency (EPA) has set a limit of 100 parts per million (ppm) for fugitive emissions from a valve in selected VOC (Volatile Organic Compound) services.
3. In vacuum service, reversing the ENVIRO-SEAL PTFE packing rings is not necessary.
Product Bulletin
ED Valve
51.1:ED
December 2012
D100017X012
DOUBLE
PISTON RINGS
(SMALLER SIZES
HAVE TRIPLE
PISTON RINGS)
BONNET
GASKET
LOAD
RING
RESTRICTED
TRIM
ADAPTORS
SPIRAL
WOUND
GASKET
W0977-4
RESTRICTED TRIM
W3362-1
PTFE V-RING
PACKING
BONNET GASKET
BALANCING PORT
SHIM
SPIRAL
WOUND GASKET
VALVE PLUG
PIN
SEAT RING
GASKET
SEAT RING
W0451-4
Product Bulletin
ED Valve
51.1:ED
December 2012
D100017X012
OPTIONAL LINER
W0969-5
W2002-5
W6980
WhisperFlo TRIM
W6851-1
Product Bulletin
ED Valve
51.1:ED
December 2012
D100017X012
VALVE SIZE
NPS
PORT DIAMETER
mm
CAGE STYLE
Inches
2-1/2
73
2.875
87.3
3.4375
73
2.875
73
2.875
73
111.1
2.875
4.375
136.5
5.375
177.8
177.8
ED
(CL150-600)
203.2
ANSI/FCI LEAKAGE
CLASS
V to 593_C (1100_F)
[for port diameters
from 73 through 203.2
mm (2.875 through
8-inch) with optional
C-seal trim]
STAKE THREAD
FLOW DOWN
PISTON
RING
RETAINER
C-SEAL
METAL
PLUG
SEAL(1)
VALVE PLUG
FLOW UP
C-SEAL
METAL
PLUG
SEAL(1)
A6869
Note:
1. Reverse the orientation of the C-seal plug seal for proper shutoff when valve is used in a process with different fluid flow direction.
Product Bulletin
ED Valve
51.1:ED
December 2012
D100017X012
Screwed
ED
1, 1-1/2, or 2
2-1/2, 3, 4, 6, or 8
EAD
EDR
VALVE
VALVE
ED
CL150
CL300
CL600
Buttwelding
X
---
X
X
X
X
X
X
X
X
X
---
X
X
X
X
1 or 2
3, 4, or 6
-----
X
X
X
X
X
X
X
X
-----
-----
-----
1, 1-1/2, or 2
2-1/2, 3, or 4
X
---
X
X
X
X
X
X
X
X
X
---
X
X
X
X
VALVE
SIZE,
DN
25, 40, 50, 65, 80,
100, 150, or 200
Socket
Weld
CL125
FF Flanged
CL250
RF Flanged
PN25
PN40
PN63
PN100
EAD
EDR
X = Available Construction.
1. End connection style abbreviations: FF - Flat Faced, RF - Raised Face, RTJ - Ring Type Joint.
2. End connection EN1092-1/B.
ENVIRO-SEAL and
HIGH-SEAL
Packing Systems
ENVIRO-SEAL and HIGH-SEAL packing systems offer
exceptional sealing capabilities. They easily install in
your existing valves or can be purchased with new
valves. These systems may help prevent the loss of
process fluid. The long operational life and reliability of
Product Bulletin
ED Valve
51.1:ED
December 2012
D100017X012
Table 3. Typical Combinations of Metal Trim Parts(1) for all Valves Except Those for NACE Specification, Whisper Trim
III, and WhisperFlo Cages
Trim Designation
Valve Plug
Cage
Seat Ring
Liner
(EAD Valve Only)
S41600 HT
CB7Cu-1 HT
S41600 HT or
CA15 HT(2)
S41600 HT
3 and 3H(3)
S31600
with seat and guide hard faced with
CoCr-A hardfacing alloy
R30006 (alloy 6)
R30006 (alloy 6)
---
4(4)
S31600
CB7Cu-1 HT
S31600
S31600
27
R30006 (alloy 6)
---
28(5)
CF8M
with electroless
nickel coating (ENC)
S31600
CF8M
with electroless
nickel coating (ENC)
S31600
S31600
37 and 37H(3)
S31600
with seat and guide
hard faced with CoCr-A hardfacing alloy
CB7Cu-1 HT
R30006 (alloy 6)
1. Nonferrous-alloy combinations are also available. Consult your Emerson Process Management sales office for details.
2. CA15 is used for NPS 6 and 8 full-size and restricted-trim valves.
3. Trims 3H and 37H have clearances for high-temperature service.
4. Not for use with Whisper Trim I.
5. Not use with Whisper Trim I with 136 mm (5.375 inch) and larger ports.
Table 4. Whisper Trim III Metal Trim Part Materials and Body/Trim Temperature Capabilities (NPS 6 Fisher ED only)
TRIM
DESIGNATION
301 (standard
for all body
materials
except
S31600)
VALVE
PLUG
S17400 HT
301A
S17400 HT
304
CAGE
CAGE
RETAINER
S41600 HT
Carbon steel
NACE with
electroless
nickel coating
(ENC)
S41600
WCC Nitrided
S31600 with
seat and guide
hard faced with
CoCr-A hardfacing alloy
S41600 HT
Carbon steel
NACE with
electroless
nickel coating
(ENC)
313
(NACE
compatible)(1)
S31600 with
seat and guide
hard faced with
CoCr-A hardfacing alloy
S31600 with
electroless
nickel coating
(ENC)
Carbon steel
NACE with
electroless
nickel coating
(ENC)
315
S31600 with
seat and guide
hard faced with
CoCr-A hardfacing alloy
Cr Ct
316 SST
Cr Ct
316 SST
S31600 with
seat and guide
hard-faced
with CoCr-A
WC9/Nitrided
318
WC9/Nitrided
BAFFLE
(FOR LEVEL
D3 CAGE
ONLY)
Steel
SEAT
RING
410 SST HT
Steel
S41600
Steel
S31600 with
seat hard
faced with
CoCr-A hardfacing alloy
BODY, BONNET
& BONNET SPACER
Min
Max
Min
Max
-29
343
-20
650
-29
163
-20
325
232
427
450
800
-29
343
-20
650
-29
177
-20
350
-29
343
-20
650
Steel
S31600 with
seat hard
faced with
CoCr-A hardfacing alloy
-29
260
-20
500
S31600
S31600 with
seat hard
faced with
CoCr-A hardfacing alloy
-198
537(2)
-325
1000(2)
S31600
with seat
hard-faced
with CoCr-A
-29
427
-20
800
-29
593
-20
1100
WC9
1. Level D3 cage cannot be certified to NACE. Use 316/ENC cage retainer instead.
2. May be used up to 593_C (1100_F) if manufacturing process controls carbon content to 0.04% minimum or 0.08% maximum.
10
MATERIAL
TEMPERATURE
CAPABILITY
_C
_F
Product Bulletin
ED Valve
51.1:ED
December 2012
D100017X012
Table 5. WhisperFlo Metal Trim Part Materials and Valve Body/Trim Temperature Capabilities (NPS 4 and 6 Fisher ED
only)
TRIM
DESIGNATION
VALVE
BODY
VALVE
PLUG
CAGE
901
WCC
S41600
902
CAGE
RETAINER
SEAT
S41000
WCC ENC
WCC
S31600/CoCrA
Seat and Guide
S41000
915
WCC
S31600/CoCrA
Seat and Guide
916
WC9
926
_C
_F
Min
Max
Min
Max
S41600
-29
343
-20
650
WCC ENC
S31600/CoCrA
-29
343
-20
650
S41000
WCC/Nitride
S31600/CoCrA
343
427
650
800
S31600/CoCrA
Seat and Guide
S41000
WC9/Nitride
S31600/CoCrA
343
538
650
1000
WCC
S31600/CoCrA
Seat and Guide
S41000 NACE
WCC/NACE/ENC
S31600/CoCrA
-29
343
-20
650
936
316
CF8M
S31600/CoCrA
Seat and Guide
S31603/
R31233
S31600/ENC
S31600/CoCrA
-198
343
-325
650
946
316
CF8M
S31600/CoCrA
Seat and Guide
S31603/
R31233
S31600/Nitride
S31600/CoCrA
343
538
650
1000
S31803/CoCrA
Seat and Guide
S31803/
R31233
S31803/CoCrA
Seat
-51
316
-60
600
S31803/ Cr Plate
-46
316
-51
600
-29
316
-20
600
CD3MN
990
LCC
WCC
11
Product Bulletin
ED Valve
51.1:ED
December 2012
D100017X012
PACKING
BOX
STUDS
SPRING
SPRINGS
FOLLOWER
ANTIEXTRUSION
RING
PACKING
RING
PACKING
VALVE
BONNET
LANTERN
RING
W8533-1
W5803-3
PACKING
BOX
STUD
SPRINGS
FOLLOWER
PACKING
W8532-1
W7018
12
ED Valve
D100017X012
Product Bulletin
51.1:ED
December 2012
Figure 7. Cutaway of ENVIRO-SEAL Bellows Seal Bonnet and Internal Shroud, Showing Bellows
W5852-1
13
Product Bulletin
ED Valve
51.1:ED
December 2012
D100017X012
MATERIAL
Cap screws
WCC, or WC9
valve body
LCC valve body
WC9 valve body
CF8M
(316 SST)
valve body
_C
Studs
Steel SA-193-B7
Nuts
Steel SA-194-2H
Studs
Steel SA-193-B7
Nuts
Steel SA-194-2H
Studs
Steel SA-193-B16
Nuts
Steel SA-194-7
Studs
Nuts
Studs
Nuts
Studs
Nuts
Piston ring
Graphite (FMS17F39)
Valve plug stem
Max
Min
Max
-29
232
-20
450
-29
427(1)
-20
800(1)
-46
343(1)
-50
650(1)
-29
566(1)
-20
1050(1)
-48
427(1)
-55
800(1)
-198
38
-325
100
-198 (2)
427(1)
-325 (2)
800(1)
Oxidizing service
-46(3)
427
-50(3)
800
Non-oxidizing service
-46(3)
482
-50(3)
900
Oxidizing service
-46(3)
560
-50(3)
1000
Non-oxidizing service
-46(3)
593
-50(3)
1100
-198 (2)
593
-325 (2)
1100
S31600
-101
316
-150
600
N06600
-254
593
-425
1100
N05500
-204
260
-400
500
Cast iron
-73
232
-100
450
WCC steel
-29
427
-20
800
S31600
-198 (2)
593
-325 (2)
1100
1100(4)
FGM (standard)
-198
593(4)
-325
PTFE-coated N04400
-73
149
-100
300
N06600/graphite (FGM-standard)
-198
593(4)
-325
1100(4)
N04400/composition
-73
232
-100
450
S31600
Shim
N04400
PTFE V-ring
-40
232
-40
PTFE/composition
-73
232
-100
450
Graphite ribbon/filament
-198
538(6)
-325
1000(6)
371
649
700
1200
S31600
-198 (2)
593(1)
-325 (2)
1100(1)
S31600
-198 (2)
593
-325 (2)
1100
S31600
S41600
-29
427
-20
800
S31600
-198 (2)
593
-325 (2)
1100
Trims 1 &
37H
Other trims
14
_F
Min
450
Product Bulletin
ED Valve
51.1:ED
December 2012
D100017X012
Figure 8. Typical Trim Used for All Valves Except NPS 4 and 6 Fisher ED with Whisper Trim III Cage and WhisperFlo
Cage
FLUID TEMPERATURE, _C
0
200
40
41.4
1200
30
400
25
300
20
1
15
200
10
100
500
100
200
300
FLUID TEMPERATURE, _F
37H
1, 37, OR 29
800
40
400
20
0
- 20
- 50
200
1200
60
1, 3,
37H
2
40
400
3H
20
2
0
0
- 200
0
- 20
400
410
800
1200
1100
1000
200
400
500
600
700
800
FLUID TEMPERATURE, _F
200
400
600
100
1200
80
1, 3, 37
300
1400
- 200
600
100
600
200
FLUID TEMPERATURE, _C
400
1400
800
100
1
WITH CL600
WCC OR LCC STEEL VALVE BODY
FLUID TEMPERATURE, _C
0
1 OR 29 4
0
- 100
450
1 OR 37H
4, 29
WITH CL250B 1
CAST IRON VALVE BODY
- 100
60
600
0
500
400
- 20
1000
200
0
- 100
80
37
35
PRESSURE DROP, BAR
600
100
80
1000
28 OR 29
800
60
3
27
600
40
400
100
FLUID TEMPERATURE, _C
0
400
200
1500
1400
20
200
29
0
- 400
- 325
400
650 800
1200
FLUID TEMPERATURE, _F
FLUID TEMPERATURE, _F
WITH CL600 1
WC9 CHROME MOLY STEEL VALVE BODY
WITH CL600 1
316 STAINLESS STEEL (CF8M) VALVE BODY
B1470-7
Notes:
1
Do not exceed the maximum pressure and temperature for the pressure rating of the valve material used, even though the trims shown may have higher
capabilities.
Be especially careful to specify service temperature if trim 3 or 37 is selected, as different thermal expansion rates require special plug clearances. Specify trim 37H
2
for temperatures above 210_C (410_F). Specify trim 3H for temperatures above 427_C (800_F).
3
Trim 29 may be used up to 103 bar (1500 psi) with clean, dry gas.
Use trim 27 instead of trim 29 for nonlubricating fluids such as superheated steam or dry gases between 149 and 316_C (300 and 600_F).
4
15
Product Bulletin
ED Valve
51.1:ED
December 2012
D100017X012
W3332-2
Figure 10. Typical Trim Used for NPS 6 Fisher ED Valves with Whisper Trim III Cages
FLUID TEMPERATURE, _C
200
400
FLUID TEMPERATURE, _C
600
- 200
1600
100
1400
800
60
301, 301A,
318
600
40
400
318
20
200
0
0
- 200
0
- 20
400
800
1050
1200
FLUID TEMPERATURE, _F
A2703-4
Note:
1
16
301A,
318
600
400
100
1200
80
1000
200
1400
1200
80
1000
60
800
315
600
40
304 OR 313
315
400
20
200
0
0
- 400
- 325
0
- 20
400
650 800
1200
FLUID TEMPERATURE, _F
1
WITH CL600
316 STAINLESS STEEL (CF8M) BODY
Do not exceed the maximum pressure and temperature for the pressure rating of the body material used, even though the trim shown may have higher capabilities.
Product Bulletin
ED Valve
51.1:ED
December 2012
D100017X012
Table 7. Valve Body/Trim Temperature Capabilities(1) For All Valves Except NPS 6 Fisher ED with Whisper Trim III Cage
and NPS 4 and 6 ED with WhisperFlo Cage
VALVE BODY/BONNET(2)
MATERIAL
Cast iron
WCC steel
LCC steel
CF8M (316
stainless steel)
TRIM
DESIGNATION
MATERIAL
TEMPERATURE
CAPABILITY
_F
Min
Max
Min
Max
1, 3, 27, or 29
All
-29
232
-20
450
37
All
-29
210
-20
410
37H
All
210
232
410
450
All
-29
427
-20
800
All
-29
210
-20
410
27
-29
343
-20
650
29
All
-29
149(4)
-20
300(4)
37
All
-29
210
-20
410
37H
All
210
427
410
800
1 or 3
All
-29
427
-20
800
27
-29
343
-20
650
29
All
-29
149(4)
-20
300(4)
37
All
-29
210
-20
410
3H
All
427
593
800
1100
37H
All
210
427
410
800
All
-29
343
-20
650
All
-46
210
-50
410
27
-46
343
-50
650
29
All
-46
149(4)
-50
300(4)
37
All
-46
210
-50
410
37H
All
210
343
410
650
27
All
-198(3)
343
-325(3)
650
28
All
-198(3)
149(4)
-325(3)
300(4)
29
All
-198(3)
149(4)
-325(3)
300(4)
1. For metal trim parts only. Restricted trim and full-sized limits are the same.
2. Same material also used for bottom flange, if required.
3. May be used down to -254_C (-425_F) if manufacturing process includes Charpy impact test.
4. Lubricating service allows usage to 316_C (600_F).
W7065
W6851-1
17
Product Bulletin
ED Valve
51.1:ED
December 2012
D100017X012
PACKING MATERIAL
Plain:
J Standard for all valves through
NPS 6 valve body with 2-13/16 yoke
boss diameter
J Standard for NPS 6 and 8 valves in cast
iron and WCC steel bonnet material with
3-9/16 yoke boss diameter
Style 1 Cast Extension:
J Standard for NPS 8 valves in S31600
bonnet material with 3-9/16 yoke boss
diameter
Style 2 Cast Extension:
J Optional for NPS 2 through 4 valves with
2-13/16 inch yoke boss diameter
J Optional for NPS 6 and 8 valves
with 3-9/16 yoke boss diameter. Not
available for NPS 8 valve in S31600
bonnet material
_F
PTFE V-ring
-18 to 232
0 to 450
PTFE/Composition
-18 to 232
0 to 450
Graphite ribbon/filament
0 to maximum shown
in table 6
-46 to 427
-50 to 800
-101 to 427
-150 to 800
PTFE V-ring
PTFE/Composition
Graphite ribbon/filament
PTFE V-ring
PTFE/Composition
Graphite ribbon/filament
PTFE
_C
Graphite ULF
1. These in-body process temperatures assume an outside, ambient temperature of 21_C (70_F) and no insulation on the bonnet. When using any packing at low process temperatures, a cast
extension bonnet may have to be used to prevent packing damage which could result from the formation of valve stem frost. Material selection for trim and other components will also be
limiting factors.
Table 9. Maximum Flow Coefficients for Full-Sized Trim with Equal Percentage Cage and Normal Flow Direction
Valve
ED
with liner
EAD
without liner
EDR
18
1
1-1/2
2
2-1/2
3
4
6
8(1)
8(2)
1
2
3
4
6
1
2
3
4
6
1
1-1/2
2
2-1/2
3
4
17.2
35.8
59.7
99.4
136
224
394
567
819
18.5
48.1
149
152
336
19.0
47.2
148
156
328
17.2
35.8
59.7
99.4
136
224
Product Bulletin
ED Valve
51.1:ED
December 2012
D100017X012
Table 10. Metal Trim Part Materials for Compatibility with NACE MR0175 / ISO 15156 and MR0103 (Sour Service)
Specifications, Environmental Restrictions Apply, Refer to Standard. Contact your Emerson Process Management
Sales Office for information on NACE MR0175 / ISO 15156 and NACE MR0103.
Optional
Liner for
Metal
Seat
(EAD
only)
Trim
Designation
Valve Plug
Cage
Seat Ring
for Standard
Metal Seat
Construction
85(2)
S31600
S31600 with
electroless nickel
coating (ENC)
S31600
S31600
S31600 with
electroless nickel
coating (ENC)
R30006 (alloy 6)
---
S31600 with
electroless nickel
coating (ENC)
R30006 (alloy 6)
---
86(2)
87
S31600
with seat hard
faced with CoCr-A
hardfacing alloy
S31600
with seat and
guide hard faced
with CoCr-A hardfacing alloy
Load Ring(1)
N05500
19
Product Bulletin
ED Valve
51.1:ED
December 2012
D100017X012
Table 11. Port Diameters, Valve Plug Travel, and Stem and Yoke Boss Diameters
VALVE SIZE, NPS
ED or EDR
PORT
DIAMETER
EAD
Full-Sized
Trim
RestrictedCapacity
Trim
1
--1-1/2
---
MAX VALVE
PLUG
TRAVEL
Standard
Optional
Full-Sized
Trim
RestrictedCapacity
Trim
mm
Inch
mm
Inch
mm
Inch
mm
Inch
mm
Inch
mm
Inch
1-1/2
2
--2-1/2
1
--2
---
2
----3
33.3
33.3
47.6
47.6
1.3125
1.3125
1.875
1.875
19
19
19
19
0.75
0.75
0.75
0.75
9.5
12.7
9.5
1.7
3/8
1/2
3/8
1/2
54
71
54
71
2-1/8
2-13/16
2-1/8
2-13/16
12.7
--12.7
---
1/2
--1/2
---
71
--71
---
2-13/16
--2-13/16
---
2
2-1/2
3
3
4
---
--3
4
4
6
---
58.7
73.0
87.3
2.3125
2.875
3.4375
29
38
38
1.125
1.5
1.5
12.7
12.7
12.7
1/2
1/2
1/2
71
71
71
2-13/16
2-13/16
2-13/16
19.1
19.1
19.1
3/4
3/4
3/4
90
90
90
3-9/16
3-9/16
3-9/16
---
---
87(3)
111.1
3(3)
2
12.7
1/2
71
2-13/16
19.1
3/4
90
3-9/16
25.4
127
19.1
3/4
90
3-9/16
25.4
or
31.8
1
or
1-1/4
127
6(1)
8(1)
-----
---
---
---
---
3.4375(3) 76(3)
4.375
51
177.8(2)
7(2)
51(2)
2(2)
136(3)
5.375(3)
76(3)
3(3)
51
76
203.2
Stem
Yoke Boss
Stem
Yoke Boss
Table 12. Bolting Materials and Temperature Limits for Compatibility with NACE MR0175-2002, NACE MR0175/ISO
15156, and NACE MR0103. Environmental restrictions may apply
VALVE BODY
MATERIAL
TEMPERATURE
CAPABILITIES
BOLTING MATERIAL
_C
_F
Min
Max
Min
Max
-48(2)
427
-55(2)
800
-55(2)
800
Studs
Steel SA-193-B7
Nuts
Steel SA-194-2H
Studs
Steel SA-193-B7M
Nuts
Steel SA-194-2HM
-48(2)
427
1. Derating is not required for CL300 valves. Derating may be required for valves rated at CL600. Contact your Emerson Process Management sales office for assistance in determining the
derating of valves when these body-to-bonnet bolting materials are used.
2. -29_C (-20_F) with WCC valve body material.
20
Product Bulletin
ED Valve
51.1:ED
December 2012
D100017X012
Figure 12. Typical Trim Used for NACE MR0175 / ISO 15156 and NACE MR0103. Environmental restrictions may apply
FLUID TEMPERATURE, _C
FLUID TEMPERATURE, _C
0
100
200
300
400
1600
100
1000
60
800
87
86
600
40
400
400
600
110
100
1200
PRESSURE DROP, PSI
80
200
1400
1200
1600
110
1400
- 200
80
1000
60
86
800
87
600
40
400
20
200
- 200 - 100
100
200
300
400
500
600
700
- 50
FLUID TEMPERATURE, _F
C0575-2
Notes:
1
2
20
200
85
- 100
85
0
- 400
- 325
- 100
400
650 800
1200
FLUID TEMPERATURE, _F
Do not exceed the maximum pressure and temperature for the pressure rating of the valve material used, even though the trim shown may have higher capabilities.
Use trim 87 instead of trim 85 for nonlubricating fluids such as superheated steam or dry gases between 149 and 316_C (300 and 600_F).
21
Product Bulletin
ED Valve
51.1:ED
December 2012
D100017X012
VALVE
SIZE,
NPS
Scrd
or SW
CL125 FF or
150 RF
CL150 RTJ
CL250 RF or
300 RF
CL300 RTJ
BW or
CL600 RF
1
1-1/2
2
210
251
286
184
222
254
197
235
267
197
235
267
210
248
282
2-1/2
3
4
6
8
-----------
276
298
353
451
543
292
311
365
464
556
292
317
368
473
568
1
1-1/2
2
8.25
9.88
11.25
7.25
8.75
10.00
7.75
9.25
10.50
2-1/2
3
4
6
8
-----------
10.88
11.75
13.88
17.75
21.38
11.38
12.25
14.38
18.25
21.88
G (MAX)
CL600 RTJ
PN16-40(2)
PN63-100(2)
ED
EDR
210
251
286
210
251
289
160
200
230
230
260
300
60
71
78
119
116
133
308
333
384
489
584
311
337
394
508
610
314
340
397
511
613
290
310
350
480
600
340
380
430
550
650
90
97
129
140
191
159
168
192
-----
7.75
9.25
10.50
8.25
9.75
11.12
8.25
9.88
11.25
8.25
9.88
11.38
2.38
2.81
3.06
4.69
4.56
5.25
11.50
12.50
14.50
18.62
22.38
12.12
13.12
15.12
19.25
23.00
12.25
13.25
15.50
20.00
24.00
12.38
13.38
15.62
20.12
24.12
3.56
3.81
5.06
5.51
7.50
6.25
6.62
7.56
-----
mm
Inch
See
mm
below
See
mm
below
1. End connection style abbreviations: BW - Buttwelding, FF - Flat Faced, Scrd - Screwed, SW - Socketweld, RF - Raised Face, RTJ - Ring Type Joint.
2. Valves which meet EN flange standards and have EN face-to-face dimensions are available only from Europe. Valves which meet EN flange standards but not EN face-to-face standards are
available in the US. Consult your Emerson Process Management sales office.
Figure 13. Fisher ED and EDR Dimensions (also see tables 13, 14, and 15)
MATCH
LINE
FOR
ACTUATOR
MATCH
LINE
FOR
ACTUATOR
D
D
B
A
AR4967-a
A0925-2
Notes:
1
22
B=
A
2
A
10A7397-B
A0926-1
ED VALVE BODY
Product Bulletin
ED Valve
51.1:ED
December 2012
D100017X012
ED
EDR
Stem Diameter
Stem Diameter
mm
1
1-1/2
2
2-1/2
3
4
6(1)
6(2)
8
9.5
12.7
19.1
25.4 or 31.8
9.5
12.7
19.1
127
124
---------------
149
146
165
187
191
221
-------
----162
184
187
217
251
312
375(3)
----------264
270
330
---
113
122
---------------
124
133
148
157
167
198
-------
----140
152
159
191
-------
3/8
1/2
3/4
1 or 1-1/4
3/8
1/2
3/4
5.00
4.88
---------------
5.88
5.75
6.50
7.38
7.50
8.69
-------
----6.38
7.25
7.38
8.56
9.88
12.26
14.75(3)
----------10.38
10.62
13.00
---
4.44
4.81
---------------
4.88
5.25
5.81
6.31
6.56
7.81
-------
----5.50
6.00
6.25
7.50
-------
Inch
1
1-1/2
2
2-1/2
3
4
6(1)
6(2)
8
Stem Diameter
Stem Diameter
Stem Diameter
mm
9.5
12.7
19.1
25.4 or 31.8
9.5
12.7
19.1
9.5
12.7
19.1
213
210
---------------
251
248
267
289
292
322
-------
------272
297
327
357
418
421
----------370
402
462
450
303
300
---------------
319
316
465
492
495
526
-------
--------487
518
543
604
621
321
317
---------------
----384
--518
541
-------
--------518
--573
-----
3/8
1/2
3/4
1 or 1-1/4
3/8
1/2
3/4
3/8
1/2
3/4
8.38
8.25
---------------
9.88
9.75
10.50
11.38
11.50
12.69
-------
------10.69
11.69
12.88
14.06
16.44
16.56
----------14.56
15.81
18.19
17.75
11.94
11.81
---------------
12.56
12.44
18.31
19.38
19.50
20.69
-------
--------19.19
20.38
21.38
23.76
24.44
12.62
12.50
---------------
----15.12
--20.38
21.31
-------
--------20.38
--22.56
-----
Inch
1
1-1/2
2
2-1/2
3
4
6(1)
6(2)
8
1. Standard-travel cages.
2. Whisper Trim III and WhisperFlo cages.
23
Product Bulletin
ED Valve
51.1:ED
December 2012
D100017X012
AA
VALVE
SIZE,
NPS
CL150
CL300
CL600
FOR
ACTUATOR
RTJ
RF
RTJ
BW, SW or RF
RTJ
105
143
168
197
254
105
144
170
198
256
4.12
5.62
6.62
7.75
10.00
4.12
5.69
6.69
7.81
10.06
mm
1
2
3
4
6
92
127
149
176
225
98
133
156
183
232
98
133
159
184
237
105
141
167
197
244
1
2
3
4
6
3.62
5.00
5.88
6.94
8.88
3.88
5.25
6.12
7.19
9.12
3.88
5.25
6.25
7.25
9.31
4.12
5.56
6.56
7.56
9.62
DD
Inch
AA
1. End connection style abbreviations: BW - Buttwelding, FF - Flat Faced, Scrd Screwed, SW - Socketweld, RF - Raised Face, RTJ - Ring Type Joint.
AA
AU6190-A
A0927-2
Note:
For dimensions of valves with EN (or other) end connections, consult your
Emerson Process Management sales office.
VALVE
SIZE,
NPS
1
2
3
4
6
Stem Diameter
mm
9.5
12.7
19.1
25.4 or 31.8
9.5
12.7
19.1
9.5
12.7
19.1
111
98
-------
133
121
149
140
144
----146
137
141
--------187
197
184
-------
235
223
251
241
246
----256
246
251
291
278
-------
305
291
454
445
449
------437
441
Inch
1
2
3
4
6
3/8
1/2
3/4
1 or 1-1/4
3/8
1/2
3/4
3/8
1/2
3/4
4.38
3.88
-------
5.25
4.75
5.88
5.50
5.69
----5.75
5.38
5.56
--------7.38
7.75
7.25
-------
9.25
8.75
9.88
9.50
9.69
----10.06
9.69
9.88
11.44
10.94
-------
12.00
11.44
17.88
17.50
17.69
------17.19
17.38
ENVIRO-SEAL
Bellows Seal
Bonnet
Contact
your
Emerson
sales office
ENVIRO-SEAL
Bellows Seal
Bonnet
Contact
your
Emerson
sales office
Neither Emerson, Emerson Process Management, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance
of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user.
Fisher, easy-e, Whisper Trim, WhisperFlo, and ENVIRO-SEAL are marks owned by one of the companies in the Emerson Process Management business unit of
Emerson Electric Co. Emerson Process Management, Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric Co. All other
marks are the property of their respective owners.
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not
to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are
governed by our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such
products at any time without notice.
Emerson Process Management
Marshalltown, Iowa 50158 USA
Sorocaba, 18087 Brazil
Chatham, Kent ME4 4QZ UK
Dubai, United Arab Emirates
Singapore 128461 Singapore
www.Fisher.com
E
241983, 2012 Fisher Controls International LLC. All rights reserved.