Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 196 views

    CMSS 420vt

    Uploaded by

    Kvj Srinivasarao
    The SKF Loop-powered Vibration Transmitter CMSS 420VT is a solid-state vibration transmitter that provides a 4-20 mA output proportional to vibration velocity. It has an integral sensor and can be simply installed using two wires. It continuously monitors machinery health and interfaces with PLCs or DCSs for condition monitoring. It also provides access to the dynamic transducer output through a buffered acceleration signal output.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    CMSS 420vt

    Uploaded by

    Kvj Srinivasarao
    196 views2 pages
    The SKF Loop-powered Vibration Transmitter CMSS 420VT is a solid-state vibration transmitter that provides a 4-20 mA output proportional to vibration velocity. It has an integral sensor and can be simply installed using two wires. It continuously monitors machinery health and interfaces with PLCs or DCSs for condition monitoring. It also provides access to the dynamic transducer output through a buffered acceleration signal output.

    Original Title

    CMSS_420vt (1)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The SKF Loop-powered Vibration Transmitter CMSS 420VT is a solid-state vibration transmitter that provides a 4-20 mA output proportional to vibration velocity. It has an integral sensor and can be simply installed using two wires. It continuously monitors machinery health and interfaces with PLCs or DCSs for condition monitoring. It also provides access to the dynamic transducer output through a buffered acceleration signal output.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    196 views2 pages

    CMSS 420vt

    Uploaded by

    Kvj Srinivasarao
    The SKF Loop-powered Vibration Transmitter CMSS 420VT is a solid-state vibration transmitter that provides a 4-20 mA output proportional to vibration velocity. It has an integral sensor and can be simply installed using two wires. It continuously monitors machinery health and interfaces with PLCs or DCSs for condition monitoring. It also provides access to the dynamic transducer output through a buffered acceleration signal output.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    SKF Reliability Systems condition monitoring essentials

    www.skf.com/cm
    26

    SKF Loop-powered Vibration Transmitter


    CMSS 420VT
    Features
    Solid-state reliability
    Integral sensor
    4-20 mA output
    Dynamic signal output

    Description
    The CMSS 420VT is a solid-state, loop-powered vibration
    transmitter. It provides a 4-20 mA output that is proportional
    to overall vibration in terms of velocity. The CMSS 420VT
    continuously monitors machinery health and transmits
    directly into a PLC or DCS for trending, alarm and machine
    shutdown. In addition, the CMSS 420VT provides access to the
    dynamic transducer output. The buffered output is available
    for temporary connection of portable analyzers for detailed
    machine fault analysis.

    Simple installation
    Simply mount the CMSS 420VT into a 1/4-28 or M8 tapped
    hole in the bearing housing or machine case (NPT Mounting
    Adapters are available, part number CMSS 203), connect two
    wires into a 4-20 mA loop, and you are ready to interface with
    a PLC or DCS. Electrical conduit may be connected directly to
    the top 3/4 NPT fitting, (NPT Mounting Adapters are available,
    part number CMSS 203).

    Specifications
    DYNAMIC
    Output: 4-20 mA proportional to full scale Velocity
    Accuracy: 5% of full-scale
    Frequency response: 2-2,000 Hz
    Frequency response accuracy:
    -3 db: 2 Hz to 2 kHz
    10%: 10 Hz to 1 kHz
    5%: 15 Hz to 750 Hz

    ENVIRONMENTAL
    Operating temperature: -20 C to +80 C (-4 F to +176 F)
    Sealed: Epoxy encapsulated

    Buffered output: Acceleration, 100 mV/g

    Enclosure: SS, NEMA 4, 4X, 12

    ELECTRICAL

    Weight (without display): 227 g (8 oz.)

    Power (Two wire loop power): +22 Vdc to +36 Vdc


    Maximum load (see note maximum load resistance calculations for specific
    requirements): Up to 600 Ohms resistive
    Grounding: Case isolated

    Mounting: Stud mounted

    REGULATORY APPROVAL
    CE Mark: SKF Loop-Powered Vibration Transmitter CMSS 420VT and
    displays CMSS 420LCD and CMSS 420LED

    SKF Reliability Systems condition monitoring essentials


    www.skf.com/cm
    27

    SKF Loop-powered Vibration Transmitter CMSS 420VT


    Ordering information
    CMSS 420VT-1 25.4 mm/sec. (0-1 in/sec.) RMS,
    includes 1/4-28 and M8 Mounting Studs
    CMSS 420VT-2 50.8 mm/sec. (0-2 in/sec.) RMS,
    includes 1/4-28 and M8 Mounting Studs

    Optional display
    Light Emitting Diode Display (LED)

    Liquid Crystal Display (LCD)

    CMSS 420LED-01 0-1 in/sec.

    CMSS 420LCD-01 0-1 in/sec.

    CMSS 420LED-02 0-2 in/sec.

    CMSS 420LCD-02 0-2 in/sec.

    CMSS 420LED-51 25.4 mm/sec.

    CMSS 420LCD-51 25.4 mm/sec.

    CMSS 420LED-52 50.8 mm/sec.

    CMSS 420LCD-52 50.8 mm/sec.

    Accessories
    CMSS 420LCD/CMSS 420LED Display
    Retrofit (requires transmitter)
    LCD displays actual vibration levels in
    velocity on a Liquid Crystal display. LED
    displays actual vibration levels in velocity
    on a Light Emitting Diode display. The
    displays are shipped loose, and it is a simple installation.
    Includes a BNC connector that provides access to the raw
    acceleration signal.
    CMSS 420BNC BNC Adapter Retrofit
    90 Degree 3/4 NPT conduit elbow
    with a BNC connector to access the raw
    acceleration signal. This is useful for
    connection to portable data collectors.
    CMSS 420WF 3/4 NPT
    Weatherproof Cable Fitting

    CMSS 420EL 90 Degree 3/4 by 3/4 NPT Elbow


    Useful for connecting CMSS 420VT to
    hard or flexible conduit. When used with
    the CMSS 420WF, provides a simple
    weatherproof exit for the instrument wire.
    CMSS 203 Pipe Thread
    Accelerometer Mounting Adapter
    They are provided in several NPT
    sizes to accommodate the most
    common plugs found on most
    machinery. The adapters have a
    1/4-28 threaded hole to mate
    with the CMSS 420VT and most
    common accelerometers and
    vibration transmitters.

    When used with the CMSS 420EL,


    provides a simple weatherproof exit
    for the instrument wire.

    NOTE: Maximum load resistance calculations:


    RLoad = (Vs - 13.5 - Vd) / 0.032
    Where:
    RLoad = Load Resistance

    Vs = DC Supply Voltage

    Vd = Display Voltage (5.0 Vdc for LED, 2.0 Vdc for LCD, 0 Vdc if not using a display unit)
    For Example:
    Using a LED Display and a Supply Voltage of 24 Vdc
    Supply Voltage Vs = 24 V; Display Voltage Vd = 5.0 Vdc for LED
    RLoad = (Vs - 13.5 V - Vd) / 0.032

    = (24 V - 13.5 V - 5 Vdc) / 0.032

    = 172 Ohm

    Part number

    Pipe thread mounting adapter

    CMSS 203-01

    1/2 (NPT) National pipe tapered thread

    CMSS 203-02

    3/4 (NPT) National pipe tapered thread

    CMSS 203-03

    3/8 (NPT) National pipe tapered thread

    CMSS 203-04

    1/4 (NPT) National pipe tapered thread

    You might also like