Satin Glo
Satin Glo
Satin Glo
Internal Emulsion
Product Description:
Nippon Satin Glo is an acrylic-based paint with non-added lead and mercury which gives a luxury wall
finish. It is a durable decorative finish specially formulated to provide a smooth mid sheen finish. It is
washable and fungus resistant.
Recommended Uses:
For the decoration and protection of interior walls.
Composition:
Pigments
Binder
Thinner
:
:
Colour
Appearance
:
:
2 coats
Drying Time
Touch Dry
Hard Dry
:
:
Recoating Interval
4 hours
Theoretical Coverage at
Recommended Dry Film
Thickness
Properties:
NP SATIN GLO
Page 1 of 3
MAR-07 VERSION
Application Methods:
st
nd
1) Brush / Roller
3) Airless Spray
Clean Up
st
nd
Surface Preparation:
Remove all loose, defective paint or powdery residues. Repair cracks, uneven surfaces with Nippon
ACS Putty or suitable fillers. Smoothen the putty / filler areas with sandpaper. Surfaces to be painted
must be cleaned thoroughly and dry, it must be free from dirt, grease and other foreign matters. Allow
all surfaces to dry completely prior to painting. Avoid painting when the moisture content and alkalinity
of the walls is still high. (Recommended painting specification requires the moisture content of the
walls to be below 16% measured by protimeter and alkalinity of the wall to be below pH9.)
Product Name
No. of Coats
Sealer
Finish
Standard Packing
NP SATIN GLO
5 litres
Page 2 of 3
MAR-07 VERSION
Note:
* Theoretical Coverage is based on a mathematical formula
Volume Solid % x 10
Dry Film Thickness
m / lit / coat
NP SATIN GLO
Page 3 of 3
MAR-07 VERSION