Geze Hardware
Geze Hardware
Geze Hardware
B E W EG U N G M I T S Y S T E M
Floor springs
contents
4
6
8
10
12
Floor springs
GEZE TS 550 NV F
14
16
Floor springs with lever and guide rail for doors with hinges
GEZE TS 550 G-variations
18
20
28
35
Floor springs
Floor springs
Floor springs
Product features
Overall height 42 mm
Closing force adjustable size 1-4
according to EN1154 (TS 500 NV)
Closing force size 3
according to EN 1154 (TS 500 N EN3)
Back check
Closing speed adjustable
Latching action adjustable (TS 500 NV)
Safety valve preventing deliberate
overloading
Closing range from approx. 1700
Large adjustment range:
height 6 mm, lateral 10 mm,
length 10 mm
Galvanised cement box
Application range TS 500 NV
For right and left hand closing
single-action doors
For internal double-action doors
For leaf width up to 1100 mm
For leaf weights up to 150 kg
Application range TS 500 N EN3
For internal right and left closing
single-action doors
For internal double-action doors
For leaf width up to 950 mm
For leaf weights up to 100 kg
Cover plates
Various cover plates with screw accessories
are available for GEZE floor springs. Cover
plates can be used for both right and left
hand closing single-action doors and for
double-action doors.
Pivot lever/Guide rail
For the installation of a floor spring for a
single-action door a special pivot lever and
door rail with a pivot point of 36 mm is
required.
Toothed
spindle
Adjustment
closing force
Adjustment
closing speed
Adjustment
latching action
Fig. 04-1 GEZE Floor spring TS 500 NV (same dimensions for GEZE TS 500 N EN3)
Floor springs
Description
Finish
ID no.
GEZE TS 500 NV
standard version
102084
hold-open angle:
standard version
hold-open angle:
103974
104028
104029
104030
Floor springs
850
900
1050
1200
TS 500 N/ TS 550 N/
TS 550 and variations
Ordering information
103086
850
900
1050
1200
104046
104047
111594
111596
Accessories
Pivot lever and guide rail
see page 20 f.
Cover plate
stainless steel
LM, dark bronze
satin brass
length:
102127
103011
103012
5 mm
8 mm
10 mm
13 mm
15 mm
20 mm
25 mm
28 mm
30 mm
35 mm
40 mm
45 mm
50 mm
010337
050930
010338
052170
010347
010372
010373
050931
010374
010377
010378
010381
010385
T he specified hold-open angle applies to single-action doors. With double-action doors, each hold-open angle is 5 greater.
1)
Example: A GEZE TS 500 NV with 85 hold-open will have a hold-open angle of 90, if used as floor spring for double-action doors.
The use of an extended spindle may become necessary depending on the mounting position.
2)
The original GEZE TS 500 NV / TS 500 N EN3 spindle can be easily unscrewed and replaced by a longer version.
Floor springs
Floor springs
Floor springs
Product features
Overall height 54 mm
Closing force adjustable size 3-6
according to EN1154 (TS 550 NV)
Closing force size 4
according to EN 1154 4 (TS 550 N EN4)
Infinitely variable hydraulic hold-open
(80 - 165), can be enabled/disabled
Delayed closing instead of hold-open
is possible
Closing speed adjustable
Latching action adjustable
Fixed back check, integrated
Safety valve preventing deliberate
overloading
All settings can be adjusted from Application range TS 550 N EN4
the top (when installed)
For highly frequented doors
Closing range from approx. 170
For right and left hand closing
Large adjustment range: single-action doors
height 6 mm, lateral 10 mm, For double-action doors
length 9 mm
For leaf width up to 1100 mm
Galvanised cement box
For leaf weights up to 300 kg
Standard version/Scope of delivery
Floor spring complete with flat-tapered
spindle, cement box and installation
instructions (cover plate not included)
Special versions
With extended spindle up to 50 mm
(5 mm selection)
Toothed
spindle
54
1.5
Adjustment
closing force
342
362
51-60
82
36
105
36
Adjustment
hold-open/
delayed closing
Adjustment
closing speed
Adjustment
latching action
Fig. 06-1 GEZE floor spring TS 550 NV (same dimensions for GEZE TS 550 N EN4)
Floor springs
Description
Finish
GEZE TS 550 NV
standard version
123950
standard version
125982
TS 500 N/ TS 550 N/
TS 550 and variations
Bestellinformation
ID no.
see page 20 f.
Cover plate
stainless steel
LM, dark bronze
satin brass
length:
Floor springs
Accessories
125888
125889
125890
5 mm
8 mm
10 mm
13 mm
15 mm
20 mm
25 mm
28 mm
30 mm
35 mm
40 mm
45 mm
50 mm
010337
050930
010338
052170
010347
010372
010373
050931
010374
010377
010378
010381
010385
The use of an extended spindle may become necessary depending on the mounting position.
1)
The original GEZE 550 NV / TS 550 N EN4 spindle can be easily unscrewed and replaced by a longer version.
TS 550 NV
Floor springs
Floor springs
GEZE TS 550 NV F
Floor springs
Floor springs for 1-leaf fire and smoke protection doors up to 1400 mm leaf width
Product features
Overall height 54 mm
Closing force size 3-6 according
to EN1154 infinitely adjustable
from the top
Delayed closing is possible
Closing speed adjustable
Latching action adjustable
Fixed back check, integrated
Safety valve preventing deliberate
overloading
All settings can be done from the top
Closing range from approx. 180
Large adjustment range:
height 6 mm, lateral 10 mm,
length 9 mm
Galvanised cement box
Application range
For fire doors without hold-open
mechanism
For highly frequented doors
1.5
54
362
82
36
105
36
51-60
Closing force
342
The requirement
The standards stipulate that the door closer
size (closing force of the closer) must be
selected appropriate to the door width.
The next highest size must be selected if the
structural (door height, door weight) or
local conditions (wind influence) make this
necessary.
Size 3
up to 950
Size 4
Size 5
Size 6
Floor springs
Description
Finish
ID no.
GEZE TS 550 NV F
DIN left
132755
GEZE TS 550 NV F
DIN right
132754
TS 500 N/ TS 550 N/
TS 550 and variations
Ordering information
see page 20 f.
Cover plate
stainless steel
LM, dark bronze
satin brass
length:
Floor springs
Accessories
125888
125889
125890
5 mm
8 mm
10 mm
13 mm
15 mm
20 mm
25 mm
28 mm
30 mm
35 mm
40 mm
45 mm
50 mm
010337
050930
010338
052170
010347
010372
010373
050931
010374
010377
010378
010381
010385
Only for approved fire and smoke protection doors where the use of spindle extensions has been specified in the official approval certificate.
1)
The use of an extended spindle may become necessary depending on the mounting position.
2)
The original GEZE 550 NV F spindle can be easily unscrewed and replaced by a longer version.
TS 550 NV F
Floor springs
Floor springs
GEZE TS 550 E
Floor springs
Floor spring with electromechanical hold-open for 1-leaf fire and smoke protection doors up to 1400 mm leaf width
Application range
For right and left hand closing
single-action doors
For leaf width up to 1400 mm
For leaf weights up to 250 kg
For smoke and fire protection doors
with provision for floor springs
Standard version/Scope of delivery
Floor spring complete with flat-tapered
spindle, cement box and connection cable
(cover plate not included)
54
Product features
According to EN1154 and EN1155
Closing force adjustable size 3-6
Infinitely variable hold-open (800-1750),
can be enabled/disabled
Variable hold-open time for held-open
door
Closer in only one construction size
Closing force and latching action
adjustable
Safety valve preventing deliberate
overloading
Closing range from approx. 1800
Large adjustment range:
height 6 mm, lateral 10 mm,
length 10 mm
Galvanised cement box
328
360
82
105
36-46
42-52
348
10
The requirement
The standards stipulate that the door closer
size (closing force of the closer) must be
selected appropriate to the door width.
The next highest size must be selected if the
structural (door height, door weight) or
local conditions (wind influence) make this
necessary.
The solution from GEZE
The floor spring TS 550 E covers several
door closer sizes in one housing. These sizes
can be adjusted using an adjustment screw.
Closing force
Size 3
up to 950
Size 4
Size 5
Size 6
Floor springs
Description
Finish
ID no.
DIN left
064975
DIN right
064976
TS 500 N/ TS 550 N/
TS 550 and variations
Ordering information
see page 20 f.
Deckplatte
stainless steel
LM, dark bronze
satin brass
length:
Floor springs
Accessories
057766
057769
057767
5 mm
8 mm
10 mm
13 mm
15 mm
20 mm
25 mm
28 mm
30 mm
35 mm
40 mm
45 mm
50 mm
010337
050930
010338
052170
010347
010372
010373
050931
010374
010377
010378
010381
010385
Only for approved fire and smoke protection doors where the use of spindle extensions has been specified in the official approval certificate.
1)
The use of an extended spindle may become necessary depending on the mounting position.
2)
The original GEZE 550 E spindle can be easily unscrewed and replaced by a longer version.
TS 550 E
Floor springs
11
Floor springs
GEZE TS 23
Floor springs
Product features
Closing force size 2, 4 or 5
according to EN 1154
3 closer versions with different closer
sizes
900 hold-open can be enabled/disabled
Closing speed adjustable
Safety valve preventing deliberate
overloading
Adjustment range:
lateral 10 mm, length 5 mm
Galvanised cement box
The hydraulic cylinder can be exchanged
without unhinge the door
Application range
For right and left hand closing
single-action doors
For leaf width
up to 850 mm,
size 2 according to EN 1154
up to 1100 mm,
size 4 according to EN 1154
up to 1250 mm,
size 5 according to EN 1154
For leaf weights up to 250 kg
Two canisters of sealing compound (ID no. 058879) required to fill cavity between closer and cement box
1)
12
Floor springs
Ordering information
Finish
ID no.
ID no.
with special spindle
GEZE TS 23 1) size EN 2
DIN left
DIN right
007188
007191
105803
105804
GEZE TS 23 1) size EN 4
DIN left
DIN right
007189
007192
105815
105816
GEZE TS 23 1) size EN 5
DIN left
DIN right
007190
007193
105817
105818
Floor springs
Description
Accessories
Pivot lever and guide rail
see page 20 f.
Pivot bearing
see page 20
Cover plate
stainless steel
LM, dark bronze
satin brass
DIN left
DIN right
DIN left
DIN right
DIN left
DIN right
012328
012329
000842
000481
012446
012455
1)
Floor springs
TS 500 N/ TS 550 N/
TS 550 and variations
13
Floor springs
GEZE TS 550 IS
Floor springs
Floor spring with integrated door selector for 2-leaf fire and smoke protection doors up to 1400 mm width per leaf
Application range
For right and left hand closing
single-action doors
For width up to 1400 mm per leaf
Also suitable for leaves with different
widths
For leaf weights up to 250 kg
For smoke and fire protection doors
with provision for floor springs
54
388
82
105
36-46
42-52
408
14
The requirement
The standards stipulate that the door closer
size (closing force of the closer) must be
selected appropriate to the door width.
The next highest size must be selected if the
structural (door height, door weight) or
local conditions (wind influence) make this
necessary.
44
Product features
According to EN 1154 A and EN 1158
Closing force adjustable size 3-6
Closer in only one construction size
Integrated, concealed door selector
Closing speed and latching action
adjustable
Safety valve preventing deliberate
overloading
Closing range from approx. 1800
Large adjustment range:
height 6 mm, lateral 10 mm,
length 10 mm
Galvanised cement box
Size 3
up to 950
Size 4
Size 5
Size 6
Floor springs
Finish
ID no.
DIN left
DIN right
059522
059549
DIN left
DIN right
059521
059557
Floor springs
Description
TS 500 N/ TS 550 N/
TS 550 and variations
Ordering information
Accessories
Pivot lever and guide rail
see page 20 f.
Cover plate
stainless steel
059756
059556
length:
5 mm
8 mm
10 mm
13 mm
15 mm
20 mm
25 mm
28 mm
30 mm
35 mm
40 mm
45 mm
50 mm
010337
050930
010338
052170
010347
010372
010373
050931
010374
010377
010378
010381
010385
Only for approved fire and smoke protection doors where the use of spindle extensions has been specified in the official approval certificate.
1)
The use of an extended spindle may become necessary depending on the mounting position.
2)
The original GEZE 550 IS spindle can be easily unscrewed and replaced by a longer version.
TS 550 IS
Floor springs
15
Floor springs
Floor springs
Floor spring with electromechanical hold-open and integrated door selector for 2-leaf fire and smoke protection doors up to
1400 mm width per leaf
Product features
According to EN1154, EN1155
and EN1158
Closing force adjustable size 3-6
Closer in only one construction size
Infinitely variable hold-open (800-1750)
independently adjustable, can be
enabled/disabled
Variable hold-open time for held-open
door
Integrated, concealed door selector
Closing speed and latching action
adjustable
Safety valve preventing deliberate
overloading
Closing range from approx. 1800
Large adjustment range:
height 6 mm, lateral 10 mm,
length 10 mm
Galvanised cement box
Application range
For right and left hand closing
single-action doors
For widths up to 1400 mm per leaf
Also suitable for leaves with different
widths
For leaf weights up to 250 kg
For smoke and fire protection doors
with provision for floor springs
Standard version/Scope of delivery
1) TS 550 E-IS fixed leaf
complete with flat-tapered spindle,
cement box, plug-in connection cable
and cable with connector
(cover plate not included)
2)
The requirement
The standards stipulate that the door closer
size (closing force of the closer) must be
selected appropriate to the door width.
The next highest size must be selected if the
structural (door height, door weight) or
local conditions (wind influence) make this
necessary.
The solution from GEZE
The floor spring TS 550 E-IS covers several
door closer sizes in one housing. These sizes
can be adjusted using an adjustment screw.
54
44
Closing force
388
82
105
36-46
42-52
408
16
Size 3
up to 950
Size 4
Size 5
Size 6
Floor springs
Finish
ID no.
DIN left
DIN right
068625
068626
DIN left
DIN right
068579
068580
Floor springs
Description
TS 500 N/ TS 550 N/
TS 550 and variations
Ordering information
Accessories
Pivot lever and guide rail
see page 20 f.
Cover plate
stainless steel
059756
059556
Protective conduit
063558
length:
5 mm
8 mm
10 mm
13 mm
15 mm
20 mm
25 mm
28 mm
30 mm
35 mm
40 mm
45 mm
50 mm
010337
050930
010338
052170
010347
010372
010373
050931
010374
010377
010378
010381
010385
Only for approved fire and smoke protection doors where the use of spindle extensions has been specified in the official approval certificate.
1)
The use of an extended spindle may become necessary depending on the mounting position.
2)
The original GEZE 550 E-IS spindle can be easily unscrewed and replaced by a longer version.
TS 550 E-IS
Floor springs
17
Floor springs
Floor springs
Floor springs with lever and guide rail for doors with hinges up to 1400 mm width per leaf
Produktmerkmale
According to EN 1154 A /
resp. EN 1155 / resp. EN 1158
Closing force size 3-6
Closer in only one construction size
Closing speed and latching action
adjustable
Safety valve preventing deliberate
overloading
Closing range from approx. 1800
Large adjustment range:
height 6 mm, lateral 10 mm,
length 10 mm
Galvanised cement box with
overall height of 58 mm
With special cover plate for
a floor level clearance of 9 mm
Application range
For right and left hand closing
single-action doors 2)
For widths up to 1400 mm per leaf
For smoke and fire protection doors
with provision for floor springs
1)
2)
The requirement
The standards stipulate that the door closer
size (closing force of the closer) must be
selected appropriate to the door width.
The next highest size must be selected if the
structural (door height, door weight) or
local conditions (wind influence) make this
necessary.
Size 3
up to 950
Size 4
Size 5
Size 6
Approved for recognised smoke detection by the institute of civil engineering (DIBt), Berlin
Installation examples for floor springs with lever and guide rail, surface-mounted to rebated timber door and to flush timber door as well as concealed
to rebated timber door and to flush timber door see page 33 f.
18
Closing force
Floor springs
Finish
ID no.
DIN left
DIN right
075037
075044
DIN left
DIN right
075053
075054
DIN left
DIN right
075069
075070
DIN left
DIN right
075098
075099
DIN left
DIN right
075108
075109
DIN left
DIN right
075110
075111
silver
silver, with 25 mm spindle extension
RAL colour, with 25 mm spindle extension
072848
072850
080623
silver
silver, with 25 mm spindle extension
RAL colour, with 25 mm spindle extension
072757
072847
080622
stainless steel
029429
stainless steel
029432
Floor springs
Description
TS 500 N/ TS 550 N/
TS 550 and variations
Ordering information
Accessories
063558
059556
1)
TS 550 E-IS-G
Floor springs
19
Floor springs
TS 500 N/ TS 550 N/
TS 550 and variations
ID no.
009788
ID no.
010556
Fig. 20-1
Cover plate
Version
ID no.
012846
GEZE Door shoes and upper pivots for single action doors
Door shoe model DM
see Fig. 20-2
For bolting on.
Material: steel, drop-forged and galvanised.
With flat taper for almost every door system
(on request).
Version
ID no.
001068
037631
037630
16
19
210
MADE IN
GERMANY
Fig. 20-2
20
26
40
10
56
Floor springs
Floor springs
GEZE Door shoes and upper pivots for single action doors
Door shoe model DB
see Fig. 21-1
Version
ID no.
044579
037581
Floor springs
217
044676
DIN left
044697
DIN right
044680
044787
Pivot pin 41 mm
without spacer ring
41
28,5
16
Pivot pin 45 mm
without spacer ring
45
32,5
20
Pivot pin 49 mm
without spacer ring
49
36,5
24
33
46
Dimension =
19,5
53
Combination
b
46
Fig. 21-1
45
167
46
48
33
48
20
48
ID no.
52
Combination
48
24
45
10
19
b
S
Fig. 21-2
Floor springs
21
Floor springs
TS 500 N/ TS 550 N/
TS 550 and variations
ID no.
008269
006696
10
Version
19
33
Combination
ID no.
006719
DIN left
000889
DIN right
000890
35
36
Fig. 22-1
000891
33
38,5
Combination
b
Pivot pin 41 mm
without spacer ring
41
27
13
Pivot pin 45 mm
without spacer ringv
45
31
17
Pivot pin 49 mm
without spacer ring
49
35
21
a
Dimension =
Installation dimensions
36
6
S
Floor springs
Fig. 22-2
22
Floor springs
GEZE Door shoes and upper pivot for single action doors
Door shoe model FK
see Fig. 23-1
For welding on steel doors.
Material: steel, drop-forged
ID no.
008270
006699
Version
ID no.
006724
DIN left
000895
DIN right
000896
Fig. 23-1
000897
40
Combination
c
Dimension =
Pivot pin 41 mm
without spacer ring
41
28
15
Pivot pin 45 mm
without spacer ring
45
32
19
Pivot pin 49 mm
without spacer ring
49
36
23
19,5
78
Installation dimensions
Fig. 23-2
Floor springs
23
Floor springs
Floor springs
TS 500 N/ TS 550 N/
TS 550 and variations
Material
ID no.
DIN left
ID no.
DIN right
137586
137577
LM anodised EV1
006794
006798
Cover cap
ID no.
137640
LM anodised EV1
001090
Rebated doors
Cover caps for door shoes
model DM, DB, EK, FK 1)
Material
Fig. 24-1
ID no.
DIN left
ID no.
DIN right
137618
137617
LM anodised EV1
045196
045155
ID no.
DIN left
ID no.
DIN right
137641
137642
LM anodised EV1
037918
038302
Fig. 24-2
1)
24
The cover caps for door rail and the lower part of the hinge have been shortened by 14 mm for the installation into rebated doors.
Floor springs
001067
Version
ID no.
007432
Fig. 25-1
30
60
60
55
30
30
007434
6,5
10
ID no.
19
Version
24
20
22,5
12
90
Fig. 25-2
Fig. 10-3
Floor springs
25
Floor springs
TS 500 N/ TS 550 N/
TS 550 and variations
Floor springs
Pivot pin
ID no.
Adjustable
upper pivot
model B
43 mm
006371
55 mm
000108
65 mm
000903
Pivot pin
ID no.
Adjustable
upper pivot
model C
43 mm
006666
55 mm
000905
65 mm
000904
Fig. 26-1
ID no.
LM satin
006375
LM anodised EV1
006376
000876
26
Fig. 26-2
ID no.
LM satin
006667
LM anodised EV1
006669
000878
Floor springs
ID no.
silver
056107
dark bronze
056108
silver
059599
dark bronze
059600
Material
Colour
ID no.
Aluminium
silver
056109
dark bronze
056110
with square
socket
Pivot lever
Guide rail
Pivot lever
Floor springs
Type
Guide rail
Guide rail
see Fig. 27-2
Fig. 27-1
Drawing
Installation
Installation layout
Angle
16 mm overlap
3
3A
rebated door
1150
flush door
1350
rebated door
1150
flush door
1350
10 mm hinge distance
4A
rebated door
39 mm leaf thickness
1350
70 mm leaf thickness
1150
flush door
39 mm leaf thickness
1290
70 mm leaf thickness
1020
rebated door
39 mm leaf thickness
1250
70 mm leaf thickness
1020
flush door
39 mm leaf thickness
1130
70 mm leaf thickness
920
Fig. 27-2
Floor springs
27
Floor springs
Installation examples
Standard installation
42
Floor springs
TS 500 N/ TS 550 N/
TS 550 and variations
278
Model
DM
DB, EK, FK
16 mm
10 mm
27 mm
24 mm
28
Floor springs
Installation examples
Standard installation
Floor springs
DM
DB, EK, FK
16 mm
10 mm
27 mm
24 mm
Model
Floor springs
29
Floor springs
TS 500 N/ TS 550 N/
TS 550 and variations
Floor springs
Guide rail
Fig. 30-2 Standard installation of GEZE TS 550 NV to a double action door
CM
C
19 mm
19 mm
29 mm
29 mm
Model CM, C
for double action doors
30
Model
Floor springs
Installation examples
Standard installation
Floor springs
GEZE TS 550 E
to a single action door
Guide rail
DM
DB, EK, FK
16 mm
10 mm
27 mm
24 mm
Model
Floor springs
31
Floor springs
TS 500 N/ TS 550 N/
TS 550 and variations
DM
DB, EK, FK
16 mm
10 mm
27 mm
24 mm
Fig. 32-2 Standard installation of GEZE TS 550 IS / TS 550 E-IS to a single action door
32
Model
Floor springs
Guide rail
Floor springs
Floor spring with lever and guide rail (surface-mounted) for doors with hinges
Rebated timber door 1)
11 to 25
0 to 16
20
A-A
OFF
36 - 40
58
Groove
for door seal
20
9 +2
Floor springs
82
a
42
54
328
(for TS 550 IS, TS 550 E-IS: 388 mm)
Fig. 33-1 Installation example: floor spring with lever and guide rail (surface-mounted) to a rebated timber door
11 bis 25
0 bis 16
A-A
Groove
OFF
36 - 40
58
20
9 +2
20
82
a
42
54
328
(for TS 550 IS, TS 550 E-IS: 388 mm)
Fig. 33-2 Installation example: floor spring with lever and guide rail (surface-mounted) to a flush timber door
1)
Installation examples / vertical sections and plan views DIN left shown in illustration (Reversed for DIN right)
Floor springs
33
Floor springs
TS 500 N/ TS 550 N/
TS 550 and variations
Floor springs
11 to 25
0 to 16
35 to 48
20
190
100
10
A-A
36 - 40
OFF
Groove
58
20
9 +2
10
82
a
42
328
(for TS 550 IS, TS 550 E-IS: 388 mm)
Fig. 34-1 Installation example: floor spring with lever and guide rail (concealed) to a rebated timber door
11 to 25
0 to 16
50 to 55
100
190
10
Floor spring
20
10
58
OFF
A
36 - 40
20
9 +2
A-A
Groove
for door seal
a
42
82
328
(for TS 550 IS, TS 550 E-IS: 388 mm)
Fig. 34-2 Installation example: floor spring with lever and guide rail (concealed) to a flush timber door
1)
34
Installation examples / vertical sections and plan views DIN left shown in illustration (Reversed for DIN right)
Floor springs
Electrical installation
The floor springs with electromechanical
hold-open must be connected to a power
supply to allow the door to be held open.
Electrical data
Operating voltage 24 V DC
Voltage tolerances +10% -15%
Max. residual ripple 20%
Connected load 110 mA
(GEZE TS 550 E / TS 550 E-G)
Connected load 220 mA
(GEZE TS 550 E-IS / TS 550 E-IS-G)
Actuation
to the smoke
protective
switch/
Function
Voltage applied to closer
= door held open
No voltage applied
or switched off
= door not held open,
door closes automatically
The door can be closed manually at any
time regardless of whether or not voltage
is being applied.
If a power failure occures or the closer is
electrically tripped, the closer must be
tensioned again.
To allow this, the door must close with back
check at least once. The closer can then be
held open again. This effect only occurs in
the case of a power failure or electrical
tripping, and not if the door is closed
manually whereby the closer can be
actuated in the same way as the standard
TS 550 with mechanical hold-open.
Power supply cable
The power supply cable should be laid to
a junction box next to the door closer.
The cable is included in the package
and should be installed in a protective
conduit which is available as an accessory.
Floor springs
switch
power supply
24 V DC
Connection cable 3m
Fig. 35-1 Electrical installation GEZE TS 550 E / TS 550 E-G
Actuation
switch
Moving leaf
Fixed leaf
to the smoke
protective
switch/
power supply
24 V DC
Connection cable 3m
Connection cable 3m
Floor springs
35
Floor springs
Floor springs
TS 500 N/ TS 550 N/
TS 550 and variations
Notes
36
Floor springs
Floor springs
TS 500 N/ TS 550 N/
TS 550 and variations
References
37
TS 500 N/ TS 550 N/
TS 550 and variations
Floor springs
03
04
05
Hold-open systems
ID 091593, ID 091594
Floor springs
ID 091607
13
23
Swing doors
ID 144785
11
ID 143639
01
02
ID 135772
22
Revolving doors
06
17
ID 132050
06
11
ID 127785, ID 127789
17
18
19
20
Panic locks
ID 132848
Electric strikes
ID 148666
Glass systems
21
22
23
38
08
ID 127785, ID 127789
Safety technology
16
04
ID 127787
20
14
07
10
07
15
17
21
15
05
12
03
Safety technology
GEZE safety technology sets the standards where preventative fire protection, access control and anti-theft security
in emergency exits are concerned. For each of these objectives GEZE offers tailored solutions, which combine the individual safety requirements in one intelligent system and
close doors and windows in case of danger in a coordinated
manner.
21
18
Building systems
16
09
19
In GEZEs Building Management System GEZE door, window and safety products can be integrated in to the security and control systems of the building. A central control and visualisation system monitors various automation
components in the building and offers security through
many different networking capabilities.
Glass systems
GEZE glass systems stand for open and transparent interior
design. They can either blend discreetly into the architecture of the building or stand out as an accentuated feature.
GEZE offers a wide variety of technologies for functional,
reliable and aesthetic sliding wall or sliding door systems
providing security with lots of design scope.
Floor springs
39
Floor springs
Door technology
TS 500 N/ TS 550 N/
TS 550 and variations
G E Z E d o o r t e c h n o lo g y
GEZE GmbH
P.O. Box 1363
71226 Leonberg
Germany
GEZE GmbH
Reinhold-Vster-Strae 21-29
71229 Leonberg
Germany
Telefon +49 (0) 7152-203-0
Telefax +49 (0) 7152-203-310
www.geze.com
Germany
GEZE Sonderkonstruktionen GmbH
Planken 1
97944 Boxberg-Schweigern
Tel. +49 (0) 7930-92 94-0
Fax +49 (0) 7930-92 94-10
E-Mail: sk.de@geze.com
GEZE GmbH
Niederlassung Nord/Ost
Bhringstrae 8
13086 Berlin (Weissensee)
Tel. +49 (0) 30-47 89 90-0
Fax +49 (0) 30-47 89 90-17
E-Mail: berlin.de@geze.com
GEZE GmbH
Niederlassung West
Nordsternstrae 65
45329 Essen
Tel. +49 (0) 201-83 082-0
Fax +49 (0) 201-83 082-20
E-Mail: essen.de@geze.com
GEZE GmbH
Niederlassung Mitte
Adenauerallee 2
61440 Oberursel (b. Frankfurt)
Tel. +49 (0) 6171-63 610-0
Fax +49 (0) 6171-63 610-1
E-Mail: frankfurt.de@geze.com
GEZE GmbH
Niederlassung Sd
Breitwiesenstrae 8
71229 Leonberg
Tel. +49 (0) 7152-203-594
Fax +49 (0) 7152-203-438
E-Mail: leonberg.de@geze.com
GEZE Service GmbH NL Sdwest
Reinhold-Vster-Strae 25
71229 Leonberg
Tel. +49 (0) 7152-92 33 34
G E Z E R e p r s e nta nt
Italy
GEZE Italia Srl
Via Giotto, 4
20040 Cambiago (MI)
Tel. +39 (0) 29 50 695-11
Fax +39 (0) 29 50 695-33
E-Mail: italia.it@geze.com
GEZE Engineering Roma Srl
Via Lucrezia Romana, 91
00178 Roma
Tel. +39 (0) 6-72 65 311
Fax +39 (0) 6-72 65 3136
E-Mail: roma@geze.biz
Poland
GEZE Polska Sp.z o.o.
ul. Annopol 21
03-236 Warszawa
Tel. +48 (0) 22 440 4 440
Fax +48 (0) 22 440 4 400
E-Mail: geze.pl@geze.com
Romania
GEZE Romania s.r.l.
IRIDE Business Park,
Str. Dimitrie Pompeiu nr. 9-9a,
Building 10, Level 2, Sector 2,
020335 Bucharest
Tel.: +40 (0) 21 25 07 750
Fax: +40 (0) 21 25 07 750
E-Mail: office-romania@geze.com
Russian Federation
GEZE GmbH Representative
Office Russia
Gamsonovskiy Per. 2
115191 Moskau
Tel. +7 (0) 495 933 06 59
Fax +7 (0) 495 933 06 74
E-Mail: office-russia@geze.com
Scandinavia Sweden
GEZE Scandinavia AB
Mallslingan 10
Box 7060
18711 Tby, Sweden
Tel. +46 (0) 8-7323-400
Fax +46 (0) 8-7323-499
E-Mail: sverige.se@geze.com
Scandinavia Norway
GEZE Scandinavia AB avd. Norge
Industriveien 34 B
2073 Dal
Tel. +47 (0) 639-57 200
Fax +47 (0) 639-57 173
E-Mail: norge.se@geze.com
Scandinavia Denmark
GEZE Danmark
Branch office of GEZE Scandinavia AB
Mrkrvej 13 J-K
2630 Taastrup
Tel. +45 (0) 46-32 33 24
Fax +45 (0) 46-32 33 26
E-Mail: danmark.se@geze.com
Singapore
GEZE (Asia Pacific) Pte. Ltd.
21 Bukit Batok Crescent
#23-75 Wcega Tower
Singapore 658065
Tel: +65 6846 1338
Fax: +65 6846 9353
E-Mail: gezesea@geze.com.sg
South Africa
GEZE Distributors (Pty) Ltd.
118 Richards Drive, Halfway House,
Ext 111, P.O. Box 7934, Midrand 1685,
South Africa
Tel: + 27 (0) 113 158 286
Fax: + 27 (0) 113158261
Email: info@gezesa.co.za
Switzerland
GEZE Schweiz AG
Bodenackerstrasse 79
4657 Dulliken
Tel. +41 (0) 62 285 54 00
Fax +41 (0) 62 285 54 01
E-Mail: schweiz.ch@geze.com
Turkey
GEZE GmbH Trkiye - stanbul
rtibat Brosu
Ataehir Bulvar, Ata 2/3
Plaza Kat: 9 D: 84 Ataehir
Kadky / stanbul
Tel. + 90 (0) 21 64 55 43 15
Fax + 90 (0) 21 64 55 82 15
E-Mail: office-turkey@geze.com
Ukraine
GEZE Ukraine TOV
ul. Viskoznaya, 17,
Building 93-B, Office 12
02660 Kiev
Tel./Fax +38 (0) 44 501 22 25
E-Mail: office-ukraine@geze.com