Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 4K views

    Lift Lug Spreadsheet

    Uploaded by

    pgarrett775814233
    The document is a lifting lug design calculation sheet for a job with a total weight of 1061 pounds to be lifted using 2 lugs. It calculates the vertical and resultant forces on each lug, as well as the shear, bending, tension and bearing stresses to check that they are below the allowable limits for the Duplex 2205 material. The required weld size is calculated as 0.375 inches.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    Lift Lug Spreadsheet

    Uploaded by

    pgarrett775814233
    4K views2 pages
    The document is a lifting lug design calculation sheet for a job with a total weight of 1061 pounds to be lifted using 2 lugs. It calculates the vertical and resultant forces on each lug, as well as the shear, bending, tension and bearing stresses to check that they are below the allowable limits for the Duplex 2205 material. The required weld size is calculated as 0.375 inches.

    Original Description:

    Spreadsheet to quickly calculate a single lifting lug

    Original Title

    Lift Lug spreadsheet

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document is a lifting lug design calculation sheet for a job with a total weight of 1061 pounds to be lifted using 2 lugs. It calculates the vertical and resultant forces on each lug, as well as the shear, bending, tension and bearing stresses to check that they are below the allowable limits for the Duplex 2205 material. The required weld size is calculated as 0.375 inches.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    4K views2 pages

    Lift Lug Spreadsheet

    Uploaded by

    pgarrett775814233
    The document is a lifting lug design calculation sheet for a job with a total weight of 1061 pounds to be lifted using 2 lugs. It calculates the vertical and resultant forces on each lug, as well as the shear, bending, tension and bearing stresses to check that they are below the allowable limits for the Duplex 2205 material. The required weld size is calculated as 0.375 inches.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 2

    CALCULATION SHEET

    Job Number:
    Sheet
    1
    of
    Customer:
    Revision:
    1
    Date:
    Project:
    Title:
    Lifting Lug Design By:
    P.O. number:
    Appr'd by:
    Tag number:
    W = Total weight
    1061
    N = Number of lugs
    2
    H=
    2
    W=
    3.3125
    Fv
    Fr
    t=
    0.5
    D=
    0.75
    R=
    0.875
    Dp = Shackle pin diameter =
    0.5
    F = Actual load per lug =
    530.5
    I = Impact factor =
    1.5
    Fh
    Fv = Vertical load = F x I =
    795.75
    Fh = Fr(CosS) =
    796
    o
    S = Sling angle (Minimum = 60 )
    45
    Fr = Resultant force = Fv/sin S =
    1125
    Lug Material:
    Dplx 2205
    Material Yield Stress =
    25000
    Notes:
    Effect of gusset perpendicular to lug
    is not considered.
    Thickness of gusset is considered.
    Ss = Shear stress = Fh / (2 x t x (R-D/2))
    Ss allowable = 0.5 x Yield stress =
    fv =
    1592
    psi Shear stress is OK
    fb + ft = Bending plus tension stress (longitudinal)=fb + ft allowable = 0.8 x Yield stress =
    Fh x H
    + Fv + (.10)Fr x H
    = 3852 Bending + tension stress is OK
    t x (W2/6) t x W
    t x (W2/6)
    psi
    fg = Bearing stress = Fr / (.85 x t x Dp) =
    fg allowable = 0.5 x Yield stress =
    fg =
    5296
    psi Bearing stress is OK
    Weld Size Calculations
    Weld length = L = 2W + 2t =

    7.63 Max. allowable stress of base metal

    Section Modulus = Sx = Wt + W2/3 =

    5.31

    Bending Stress = fb = Fh x H / Sx =

    299.50 min. weld size = f / fw =

    Shear Stress = fv = Fh / L =

    104.36

    Tension Stress = ft = Fv / L =

    104.36 Actual fillet weld size =

    Combined Stress = f
    f = sq rt ((fb + ft)2 + fv2) =

    Maximum allowable Stress = fw


    417.13 fw = 0.45 x Sa =

    1
    18-Dec-14

    (pounds)
    (inches)
    (inches)
    (inches)
    (inches)
    (inches)
    (inches)
    (pounds)
    (pounds)
    (pounds)
    (degrees)
    (pounds)
    (psi)

    perpendicular to lug

    sset is considered.
    12500
    psi
    20000
    psi
    12500
    psi

    20000

    0.05

    0.375

    9000

    You might also like