Drill Jig Bushings

E&E SPECIAL PRODUCTS 7200 MILLER DRIVE, WARREN, MI 48092, 586-978-3377
PRECISION
DRILL JIG BUSHINGS
Authorized
AuthorizedDistributor:
Distributor:
PRINTED IN U.S.A. COPYRIGHT 2008 CARR LANE MANUFACTURING CO. 11952-703
WHAT MAKES A CARR LANE

DRILL BUSHING BETTER?
Carr Lane drill bushings are all

precision honed and ground, the
finest quality available. They
exceed all ANSI drill-bushing
standards. Unlike some of our
competitors, we manufacture only
first-quality drill bushings, never
economy grade.
TOP
QUALITY
Our nationwide network of stocking

distributors, plus huge inventories
at two warehouse locations,
guarantees same-day shipment for
standard bushings. In addition, our
quick-response manufacturing
capabilities allow us to ship almost
all special and modified bushings in
less than 10 days.
FAST
DELIVERY
Drill Bushing Factory
Austin, Texas
3
ECONOMICAL
PRICES
Main Factory
and Warehouse
St. Louis, Missouri
As you expect with all Carr Lane

products, our drill-bushing prices are
the most competitive around. Our
production volumes and advanced
manufacturing techniques mean
excellent value for you.
INDEX
Bushing Selection ..............................................................................................................................................................p. 2-3
Installation and Technical Data .........................................................................................................................................p. 4-5
Counterbore Data .................................................................................................................................................................p. 6
P
Press Fit
p. 9-13
SF
Slip/Fixed
Renewable
p. 21-25
HL
SP
Serrated
Press Fit
p. 19-20
FM
Flat Milled
Renewable
p. 26-27
UL
Head
Liner
p. 31-32
Locking
Liner
p. 33
CH
DC
Chip
Breaker
p. 36-37
Directed
Coolant
p. 38-39
DG
SG
L
Liner
p. 28-30
Lockscrews
and Clamps
p. 34-35
Oil
Groove
p. 40-42
ULD
Diamond
Groove
p. 43-44
Serrata
Groove
p. 45
Diamond Knurl
Locking Liner
p. 46
EZ
GD
Template
EZ Cast
p. 47
CB
Circuit Board
(Please see our
web catalog)
(11/09)
H
Head
Press Fit
p. 14-18
Gun Drill
p. 54-56
A
Air Feed
p. 57-68
TB
p. 48-51
Air-Feed
Accessories
p. 69-72
1BU
BUSHING SELECTION
USA
P - 20 - 8 Type
OD
Length
in 64ths in 16ths
of an inch of an inch
FLAT MILLED RENEWABLE:
METRIC
.1250
PM - 8 - 12 - 4.50
ID as
4-place
decimal inch
Type
OD
in
mm
Length
in
mm
ID
as 2-place
decimal mm
PRESS FIT:
Types FM and FMC (carbide). Replaceable bushing used for extra

resistance to rotational forces under harsh conditions. This bushing,
generally used with a liner, has a milled locking flat to allow fastening securely with a flat clamp. FM bushings also have a standard
recess on the other side to allow using a lockscrew instead.
LINER:
Types P, PC (carbide), and PM (metric). This is the most-popular
and least-expensive drill bushing. P bushings are permanently
pressed into the jig plate, usually flush with the top surface. They are
generally used for single-step drilling or reaming operations when
you do not expect to replace bushings during the toolings lifetime. P
bushings can be mounted closer together than headed bushings, but
offer less resistance to heavy axial loads.
HEAD PRESS FIT:
Types L and PM (metric). Liners are permanent bushings used to

hold renewable drill bushings. The liners ID has a precise sliding fit
with the renewable bushings OD. The hardened liner accurately
locates the renewable bushing and protects the jig plate from wear
caused by frequent bushing replacement. Note: Metric liner bushings
are the same as metric press-fit bushings.
HEAD LINER:
Types H, HC (carbide), and HM (metric). Similar to a P bushing, but
with a head to resist heavy axial loads. H bushings are permanently
pressed into the jig plate. They are generally used for single-step
drilling or reaming operations when you do not expect to replace
bushings during the toolings lifetime. The head can be left exposed,
or recessed by counterboring the installation hole. Note: The length
listed for a USA head-press-fit bushing refers to its length under the
head, while the metric versions length is its overall length.
SERRATED PRESS FIT:
Types HL and HM (metric). Similar to an L bushing, but with a head to

resist heavy axial loads. Head liners are permanent bushings used to
hold renewable drill bushings. The head liners ID has a precise sliding
fit with the renewable bushings OD. The hardened head liner accurately locates the renewable bushing and protects the jig plate from wear
caused by frequent bushing replacement. Note: The length listed for a
head liner refers to its overall length, not its length under the head. Metric
head-liner bushings are the same as metric head-press-fit bushings.
UN-A-LOK LINER:
Types SP and SPM (metric). Similar to a P bushing, but with top serrations to prevent rotation in soft materials. Recommended in hightorque situations for materials such as magnesium, aluminum,
masonite, or wood. Finish-ground OD ensures accurate ID location.
Serrations also resist axial force to prevent pushing the bushing
through the jig plate.
SLIP/FIXED RENEWABLE:
Types UL and ULM (metric). Similar to an HL head liner, but incorporating a special locking tab that eliminates the need for a
lockscrew. Un-A-Lok liners are permanent bushings used to hold
SF renewable drill bushings (on the slip side only, not the fixed
side). Although slightly more expensive than a head liner plus a lock
screw, installation time is dramatically reduced.
CHIP BREAKER:
Types SF, SFC/SC/FC (carbide), and SFM (metric). Replaceable
bushing generally used with a liner bushing and lockscrew. Use
when you expect to replace bushings during the toolings lifetime, or
when you want to switch bushings to perform multi-step operations
with the same tooling. SF bushings combine the benefits of older Stype slip-renewable and F-type fixed-renewable bushings: One side
has a small recess for fixed mounting; the other has a locking recess
that allows the bushing to slip down, then lock in place by rotating it.
S and F types are now obsolete (except in carbide) and combination
SF bushings will be furnished at no extra charge.
2BU
Types CH and CHM (metric). Similar to an SF renewable bushing, but

with specially designed chip-breaking notches on the drill-exit end. Use
to break up chips from tough, stringy materials, to reduce friction and
heat buildup. Reduces bushing wear at the drill-exit end and reduces
the chance of tool or workpiece damage. A chip-breaker bushing
should extend beyond its liner to allow chips to escape. Chip breakers
are also available on other bushing types such as P, H, and DC.
(12/03)
BUSHING SELECTION
DIRECTED COOLANT:
EZ CAST LINER:
Types DC, DCCH (chip breaker), DCL (liner), and DCHL (head
liner). Similar to an SF renewable bushing, but with passages to
direct coolant to the cutting area. This design is particularly good for
washing away chips, especially when ordered as the combination
Directed Coolant Chip Breaker (DCCH). DC bushings require special liners, DCL or DCHL, to direct coolant from a drilled manifold
passage to the holes in the bushings OD wall.
Type EZ. Another liner for cast-in-place or potted installation, used to

hold SF renewable drill bushings. Unlike diamond-knurl unilock liners,
EZ-cast liners hold either the slip or fixed side of an SF bushing,
since they include an integral lockscrew holder. Diamond-knurled OD
provides superior holding strength against both rotational and axial
forces. Since the bushings OD is not ground, keep the ID accurately
located during casting or potting to ensure accuracy in the finished
tool.
OIL GROOVE:
GUN DRILL:
Drill
Coolant passage
Oil grooves are available on most drill-bushing types, including P, H,

and SF. Use when you need complete drill lubrication and cooling,
such as when drilling hardened steel. Oil grooves are specially
designed coolant passageways in the bushings ID wall. Choose
from 25 different groove styles. End wipers are also available, to
keep out dirt and chips.
DIAMOND GROOVE:
Workpiece
Types GD, GDL (liner), and GDI (insert). Drill bushings for gun-drilling
machines, such as Eldorado, Drillmation, DeHoff, and Lahr. Gun drill
bushings are similar to SF renewable bushings, but with the drill bearing at the bushings head end. Depending on the gun-drilling machine,
bushings are either one-piece or two-piece (a liner and an insert).
TEMPLATE:
Types DG and DGM (metric). A bushing for cast-in-place or potted

installation. Diamond-knurled OD provides superior holding strength
against both rotational and axial forces. Since the bushings OD is
not ground, keep the ID accurately located during casting or potting
to ensure accuracy in the finished tool.
SERRATA GROOVE:
Bushing
Retainer
Ring
Type TB. An economical bushing designed for thin template jig plates
from 1/16- to 3/8-inch thick. Bushings are held in place by a retainer
ring. The OD serrations prevent the bushing from spinning. Bushings
can be removed and reused by breaking the aluminum retainer ring
(extra retainer rings available).
CIRCUIT BOARD:
Type SG. Can be cast in place or potted, just as a diamond-groove
bushing, or can also be pressed into an installation hole. Straight knurl
provides less resistance to axial loads than the diamond knurl on a DG
bushing. Since the bushings OD is not ground, keep the ID accurately
located during casting or potting to ensure accuracy in the finished tool.
DIAMOND-KNURL UN-A-LOK LINER:
Types CB and CBC (carbide). Headless and head-type bushings

made especially for circuit-board drilling machines. Available for
Electro-Mechano, Excellon, Waco, Digital, Nationwide, Edlund,
Tektronix, Leland-Gifford, Palomar, Hughes, Rapidrill, and Reliable
drilling machines.
AIR-FEED DRILL:
Types ULD and ULDM (metric). A liner for cast-in-place or potted
installation, used to hold SF renewable drill bushings. Un-A-Lok liners incorporate a special locking tab that eliminates the need for a
lockscrew. Holds only the slip side of an SF bushing, not the fixed
side. Diamond-knurled OD provides superior holding strength
against both rotational and axial forces. Since the bushings OD is
not ground, keep the ID accurately located during casting or potting
to ensure accuracy in the finished tool.
(12/03)
Collar
Shank
Reducer
Type A. Drill-bushing shanks, collars, adaptors, and locking accessories for air-feed drills, tappers, and back-spotfacers. Available for all
standard drill motors, including Gardner-Denver, Keller, Aro, Buckeye,
Quackenbush, Desoutter, and Ingersoll-Rand.
3BU
INSTALLATION AND TECHNICAL DATA

accurate and round, because these bushings are more-easily distorted. For very-close hole spacing, especially with
headed bushings, specify bushings with ground flats.
RECOMMENDED CHIP
CLEARANCE:
1/2 to 1-1/2 times

drill dia
To minimize drill bending and maximize hole accuracy, mount

drill bushings as close to the workpiece as possible while still
allowing adequate chip clearance. The necessary clearance
depends on workpiece material and chip stringiness. For
example, cast iron, with fine chips requires about 1/2 times
drill diameter for chip clearance. Materials that produce long,
stringy chips, such as cold-rolled steel and aluminum, require
at least one-drill-diameter clearance. To reduce clearance
even with long, stringy chips, exit-end chip breakers are availablesee pages 42-43.
Direct workpiece contact is usually not recommended. Chips

can escape only up through the drills flutes, drill-bearing
length is shortened by the drill points length, and drill-withdrawal burrs can raise the jig plate. Direct contact may be
necessary, though, for maximum bearing length when drilling
sloped surfaces (see below). Also, reamer bushings can be
mounted much closer than drill bushings, due to much finer
chips, for more-accurate hole finishing.
INSTALLATION-HOLE
PREPARATION:
Excessive interference
causes bellmouthing
To avoid jig-plate or bushing distortion, do not use excessive

interference fits on press-fit bushings. See table below for
recommended hole sizes in unhardened steel or cast iron jig
plates. Always prepare installation holes using a jig borer or
reamer. Standard chucking reamers (with a plus tolerance)
usually produce installation holes to the tolerances shown in
the table. Other factors to consider are: (1) headed bushings
require less interference to resist drilling thrust; (2) longer
bushings in thick plates require less interference; (3) bushings with thinner walls are more prone to distortion; (4) lessductile jig-plate materials require less interference.
METRIC
PRESS-FIT
BUSHING OD
SLOPED WORKPIECE SURFACES:
USA
PRESS-FIT
BUSHING OD
Angled
exit end
Whenever the drilling axis is not perpendicular to the workpiece surface, locate the exit end as close to the part as possible. Otherwise the drill will tend to wander. For maximum
drill guiding, we recommend specifying bushings with an
angle milled on the exit end, tangent to the workpiece surface
at point of entry.
SPECIAL BUSHINGS FOR CLOSE

HOLE SPACING:
When holes are located close together, special bushings are
sometimes required. Thinwall bushings, where the bushing
ID is larger than the normal ID range for a given OD, are often
a good solution. Holes for thinwall bushings must be very
4BU
NOM.
5/32
3/16
13/64
1/4
5/16
3/8
13/32
7/16
1/2
9/16
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-3/4
2-1/4
2-3/4
ACTUAL
.1578-.1575
.1891-.1888
.2046-.2043
.2516-.2513
.3141-.3138
.3766-.3763
.4078-.4075
.4392-.4389
.5017-.5014
.5642-.5639
.6267-.6264
.7518-.7515
.8768-.8765
1.0018-1.0015
1.1270-1.1267
1.2520-1.2517
1.3772-1.3768
1.5021-1.5018
1.7523-1.7519
2.2525-2.2521
2.7526-2.7522
RECOMMENDED
HOLE
SIZE
.1565-.1570
.1880-.1883
.2037-.2040
.2507-.2510
.3132-.3135
.3757-.3760
.4069-.4072
.4382-.4385
.5007-.5010
.5632-.5635
.6257-.6260
.7507-.7510
.8757-.8760
1.0007-1.0010
1.1257-1.1260
1.2507-1.2510
1.3757-1.3760
1.5007-1.5010
1.7507-1.7510
2.2507-2.2510
2.7507-2.7510
NOM.
3mm
4mm
5mm
6mm
7mm
8mm
10mm
12mm
15mm
18mm
22mm
26mm
30mm
35mm
42mm
48mm
55mm
62mm
70mm
78mm
85mm
95mm
105mm
115mm
125mm
RECOMMENDED
HOLE SIZE
(H7)
ACTUAL (s6)
3.020-3.014mm
3.000-3.010mm
4.027-4.019mm
4.000-4.012mm
5.027-5.019mm
5.000-5.012mm
6.027-6.019mm
6.000-6.012mm
7.032-7.023mm
7.000-7.015mm
8.032-8.023mm
8.000-8.015mm
10.032-10.023mm
10.000-10.015mm
12.039-12.028mm
12.000-12.018mm
15.039-15.028mm
15.000-15.018mm
18.039-18.028mm
18.000-18.018mm
22.048-22.035mm
22.000-22.021mm
26.048-26.035mm
26.000-26.021mm
30.048-30.035mm
30.000-30.021mm
35.059-35.043mm
35.000-35.025mm
42.059-42.043mm
42.000-42.025mm
48.059-48.043mm
48.000-48.025mm
55.072-55.053mm
55.000-55.030mm
62.072-62.053mm
62.000-62.030mm
70.078-70.059mm
70.000-70.030mm
78.078-78.059mm
78.000-78.030mm
85.093-85.071mm
85.000-85.035mm
95.093-95.071mm
95.000-95.035mm
105.101-105.079mm 105.000-105.035mm
115.101-115.079mm 115.000-115.035mm
125.117-125.092mm 125.000-125.040mm
(8/98)
INSTALLATION AND TECHNICAL DATA

UNGROUND BUSHINGS AVAILABLE
FOR OVERSIZE HOLES:
Unground OD
ANSI standards. Counterbores prevent binding and heat

buildup due to excessive bearing length. See chart on page 6
for ANSI counterbore depths. Counterbore diameters are
generally 1/32 inch larger than the inside diameter, and are
angled at the bottom for smooth entrance. No-counterbore
bushings are available on request as specials.
DRILL ENTRANCE RADIUS:

Radius
We offer bushings with unfinished ODs for custom-fitting to

oversize holes. They are slightly larger than nominal diameter to provide grinding stock, .005-.020 extra, depending on
the OD size (see charts under each specific bushing type).
We recommend grinding on a mandrel to hold ID/OD concentricity.
INSTALLATION PROCEDURE:
Arbor
Press
Drawbolt
Washer
Bushing
Bushing
Bushings feature a blended and polished radius at the drillentrance end for smooth drill entry and proper alignment, preventing drill wear and breakage. Radius size varies in proportion to drill size.
CONCENTRICITY:
.0003 A
Washer
We recommend installing bushings with an arbor press

whenever possible. If the bushings OD is large enough, you
can also use a drawbolt with two washers as shown above.
If a hammer is the only tool available, do not strike the bushing directly or it could fracture. Use a soft-metal punch to
cushion the blows. Before installing a press-fit bushing, lubricate the inside of the mounting hole and outside of the bushing with a lubricant such as lithium grease. Otherwise the
bushing may score the mounting hole, and may be difficult to
replace later.
GROUND LEAD FOR

EASY INSTALLATION:
OD
-A-
ID
Bushing OD is ground concentric to the ID to within .0003 TIR

for ID sizes from 1/8 inch to 1/2 inch (3mm to 12mm), unless
otherwise indicated. For larger or smaller sizes, concentricity
is within .0005 TIR. Unground bushings are concentric to
within .006 TIR. On counterbored bushings, concentricity
applies only over the drill-bearing length.
OTHER TOLERANCES:
Head
diameter
Ground lead
45 Chamfer
All bushings feature a concentric ground lead and a 45

chamfer on the exit end to ensure perfect alignment during
installation.
COUNTERBORES ON LONG
BUSHINGS:
Long bushings with small IDs are slightly counterbored for

proper drill-bearing length and chip clearance, as specified by
(5/05)
Length
Head
thickness
Any dimensions where tolerances are not specifically listed

are held to +/- .010 inches on standard ANSI sizes, and +/-.015
inches on larger sizes (extended range). Special tolerances
for any dimension are available on request as specials.
MATERIAL:
Standard drill-bushing material is durable 1144 Stressproof
steel, heat treated to achieve RC 62-64 ID hardness, and other
high-carbon steels. Optional materials such as tungsten carbide (Grade C2 carbide with steel head), 52100 steel, A2 tool
steel, D2 tool steel, M2 tool steel, 416 stainless, 440C stainless,
17-4PH stainless, 303 stainless, 660 bronze, Ampco 18
bronze, Ampco 21 bronze, Oilite, and brass are available as
specials. See pages 13, 19, and 27 for carbide bushings.
5BU
COUNTERBORE DATA
TYPE P DRILL BEARING LENGTH
DRILL
SIZE
(ID)
.0135
.0292
.0520
.0135
.0292
.0520
.0635
.0135
.0292
.0520
.0635
.0980
.1250
.1935
.1875
.2340
.1875
.3125
.3125
.0291
.0519
.0625
.0291
.0519
.0634
.0995
.0291
.0519
.0634
.0995
.1406
.1935
.2880
.2570
.2900
.3160
.4375
.5313
BUSHING LENGTH
OD
1/4
5/16
3/8
1/2
3/4
1-3/8
1-1/2
1-3/4
2-1/8
2-1/2
5/32
FULL
FULL
FULL
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/16
FULL
FULL
FULL
FULL
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
7/16
7/16
7/16
5/8
5/8
5/8
5/8
5/8
5/8
7/16
5/8
5/8
5/8
5/8
5/8
3/4
7/16
5/8
5/8
5/8
5/8
5/8
3/4
7/16
5/8
5/8
5/8
5/8
5/8
3/4
7/16
5/8
5/8
5/8
5/8
5/8
3/4
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
7/16
5/8
5/8
5/8
5/8
5/8
3/4
1-1/2
1-1/2
7/16
5/8
5/8
5/8
5/8
5/8
3/4
1-1/2
1-1/2
13/64
FULL
FULL
FULL
1/4
5/16
3/8
13/32
7/16
1/2
5/8
3/4
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
TYPE H DRILL BEARING LENGTH

RANGE
(ID)
.0135
.0292
.0520
.0135
.0292
.0520
.0635
.0980
.1250
.1935
.1875
.2340
.1875
.3125
.3125
.0291
.0519
.0625
.0291
.0519
.0634
.0995
.1406
.1935
.2280
.2570
.2900
.3160
.4375
.5313
BUSHING LENGTH (UNDER HEAD)

OD
5/32
1/4
FULL
5/16
1/2
3/4
1-3/8
1-1/2
1-3/4
2-1/8
2-1/2
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
7/16
7/16
7/16
7/16
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
7/16
5/8
5/8
5/8
5/8
5/8
3/4
7/16
5/8
5/8
5/8
5/8
5/8
3/4
7/16
5/8
5/8
5/8
5/8
5/8
3/4
7/16
5/8
5/8
5/8
5/8
5/8
3/4
7/16
5/8
5/8
5/8
5/8
5/8
3/4
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
7/16
5/8
5/8
5/8
5/8
5/8
3/4
1-1/2
1-1/2
7/16
5/8
5/8
5/8
5/8
5/8
3/4
1-1/2
1-1/2
3/8
5/16
FULL
FULL
5/16
13/64
FULL
FULL
FULL
1/4
5/16
3/8
13/32
7/16
1/2
5/8
3/4
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
TYPES SF & FM DRILL BEARING LENGTH

DRILL
SIZE
(ID)
.0135
.0292
.0520
.0635
.0995
.0135
.0292
.0520
.0635
.0935
.1250
.1935
.2340
.1405
.1890
.2950
6BU
.0291
.0519
.0634
.0980
.1405
.0291
.0519
.0634
.0934
.1249
.1935
.2280
.2900
.1889
.3438
.5625
BUSHING LENGTH (UNDER HEAD)

OD
1/4
5/16
3/8
1/2
5/8
3/4
1-3/8
1-1/2
1-3/4
2-1/8
2-1/2
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
FULL
3/8
3/8
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
FULL
FULL
FULL
FULL
FULL
FULL
5/8
5/8
5/8
5/8
5/8
5/8
FULL
FULL
7/8
FULL
5/8
5/8
5/8
5/8
1
5/8
5/8
5/8
5/8
1
5/8
5/8
5/8
5/8
1
5/8
5/8
5/8
5/8
1
FULL
FULL
FULL
FULL
5/8
5/8
5/8
5/8
1
1-1/2
5/8
5/8
5/8
5/8
1
1-1/2
1/4
3/16
1/4
5/16
FULL
FULL
1/4
5/16
3/8
7/16
FULL
FULL
FULL
FULL
3/8
FULL
FULL
FULL
FULL
1/2
FULL
FULL
FULL
FULL
FULL
3/4
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
FULL
(3/01)
SPECIALS
Check for adequate wall thickness by calculating the ratio of
ID divided by OD:
1. SPECIAL ID SIZE (WITHIN

LISTED ID RANGE):
With standard OD, standard length, and standard
tolerances.
Up to 1/4" OD
Over 1/4" to 1/2" OD
Over 1/2" OD
ID/OD must be .70

ID/OD must be .75
ID/OD must be .80
Please contact factory for pricing.
Special ID sizes include any ID size that is not a standard

fractional, number, letter, or metric drill size as listed on the
back cover of our catalog (reamer and tap-guide ID sizes are
specials). To price, add a prorated $55.00 setup charge to
the quantity price for the standard OD and length.
4. SPECIAL OD SIZE:
With standard ID and length for the next-larger OD, and
standard tolerances.
Example: (6) H-10-8-.0365

List price for H-10-8
$27.83
Quantity price for H-10-8 ($27.83 less 18%)

$55.00 setup divided by 6
$22.82
+ 9.17
$31.99
2. ID SIZE SMALLER THAN LISTED

RANGE:
With standard or special ID, standard OD, standard length,
and standard tolerances.
To price, compare price for the standard OD and length with

the price for the largest bushing of the same length with the
ID within range. Add a prorated $55.00 setup charge to the
higher of the two.
Example: (6) H-16-8-.0820
List price for H-16-8 (low)
List price for H-13-8 (high)
$12.05
$13.27

$10.88
+ 9.17
$20.05
3. ID SIZE LARGER THAN LISTED

RANGE (THIN-WALL BUSHINGS):
With standard or special ID, standard OD, standard length,
and standard tolerances.
(3/09)
To price, add a prorated $55.00 setup charge to the quantity

price for the same-length bushing with the next-larger
standard OD. Head dimensions for the next-larger size will
be used unless otherwise requested.
Example: (6) H-18-8-.1250
$ 9.85

$ 8.08
+9.17
$17.25
5. SPECIAL LENGTH
With standard ID, standard OD, standard tolerances, and
length shorter than maximum listed length.
To price, add a prorated $55.00 setup charge to the quantity

price for the next-longer standard length.
Example: (6) H-16-14-.1250
$ 20.03

$ 16.42
+ 9.17
$ 25.59
7BU
SPECIALS
6. EXTRA LENGTH:
With standard ID, standard OD, and standard tolerances.
To price, add the following percentages to the standard

bushings price (add a separate percentage charge for each
special tolerance). Also add a prorated $55.00 setup charge.
.0002 ID tolerance range (up to 1" ID)
.0001 ID tolerance range (up to 1" ID)
.0001 OD tolerance range (up to 1" OD)
.0002 TIR concentricity (over 1/8" to 1" ID)
+25%
+75%
+25%
+25%
Example: (6) H-16-10-.1250 ID+0/+.0001 CONC .0002

To price, add 15% for up to 1/4" extra length, to the quantity
price for the longest length listed in the catalog, plus a
prorated $55.00 setup charge.
Example: (6) H-16-26-.1250
$13.27

Add-on for .0001 ID tolerance (+ 75%)
Add-on for .0002 concentricity (+ 25%)
$10.88
+ 8.16
+ 2.72
+ 9.17
$30.93
$28.92
$23.71
Quantity price for H-16-24 plus 15%

$27.27
+ 9.17
$36.44
9. NO COUNTERBORE ON LONG
BUSHINGS:
7. COMBINATION SPECIAL ID,

OD, AND/OR LENGTH:
With standard tolerances.
Contact factory for special pricing on No Counterbore
bushings, long bushings that would normally be counterbored, according to ANSI standards.
10. OTHER ALTERATIONS:

To price, compare price for the ID range, special OD, and/or
special length. Add a prorated $55.00 setup charge to the
highest of all the prices.
Example: (6) H-22-14-.1260
List price for H-24-16, ID range (low)
List price for H-20-16, ID range (high)
List price for H-24-16, OD range (low)
List price for H-24-16, Length (low)
$11.48
$12.17
$11.48
$11.48

$ 9.98
+ 9.17
$19.15
8. SPECIAL TOLERANCES:
With standard ID, standard OD, and standard length.
For milled angles, ground flats, cross holes, chip breakers, oil
grooves, or special finishing, please contact factory.
11. SPECIAL MATERIAL:

Bushings made of the following heat-treated materials are
readily available as specials:
52100 Steel
A2 Tool Steel
D2 Tool Steel
M2 Tool Steel
416 Stainless Steel

440C Stainless Steel
17-4PH Stainless Steel
Bushings made of the following non-heat-treated materials

are also readily available as specials:
303 Stainless Steel
660 Bronze
Ampco 18 Bronze
Ampco 21 Bronze
Oilite
Brass
Please contact factory for pricing.
8BU
(3/09)
PRESS FIT
ID
RANGE
LENGTH
OD
ID
APPLICATIONS:
ORDERING EXAMPLES:
P-20-16-.1250
P-20-16-.1772
Standard USA bushing, inch ID

Standard USA bushing, mm ID
(.1772 = 4.50mm)
P-20-16U-.1250
Unground OD
P-20-16-.1250 REAMER Reamer tolerance on ID
P-20-16-.1250 NCB
No counterbore on long bushings
marked with * (no counterbore is
standard on all other bushings)
PC-20-16-.1250
Carbide bushing
PM-8-12-4.50
Standard metric bushing
Prices shown here apply to standard bushings only, either
ground or unground OD, for a standard drill size within the
stated ID range. See back cover for decimal equivalents. To
price non-standard sizes, including all reamer and tap-guide
bushings, see page 7.
STANDARD ID TOLERANCES:
From #80 to 1/4"
+ .0001/+.0004
Over 1/4 to 3/4"
+ .0001/+.0005
Over 3/4 to 1-1/2"
+ .0002/+.0006
Over 1-1/2 to 2-3/4" + .0003/+.0007
From .35 to 3mm +.002/+.008mm

Over 3 to 6mm
+.004/+.012mm
Over 6 to 10mm +.005/+.014mm
Over 10 to 18mm +.006/+.017mm
Over 18 to 30mm +.007/+.020mm
Over 30 to 50mm +.009/+.025mm
Over 50 to 80mm +.010/+.029mm
Over 80 to 120mm +.012/+.034mm
(G6 tolerance)
1/4
P-10-4
5/16
P-10-5
3/8
P-10-6
*1/2
P-10-8
1/4
P-10-4
.0292-.0519
5/32
5/16
P-10-5
3/8
P-10-6
#69-3/64
.1578-.1575
*1/2
P-10-8
.75-1.25mm (.166-.161 UNG)
*3/4
P-10-12
1/4
P-10-4
.0520-.0625
5/16
P-10-5
#55-1/16
3/8
P-10-6
*1/2
P-10-8
1.30-1.60mm
*3/4
P-10-12
1/4
P-12-4
5/16
P-12-5
.0520-.0634
3/8
P-12-6
#55-1/16
*1/2
P-12-8
1.30-1.60mm
*5/8
P-12-10
3/16
*3/4
P-12-12
.1891-.1888
1/4
P-12-4
(.201-.197 UNG)
5/16
P-12-5
.0635-.0995
3/8
P-12-6
#52-#39
1/2
P-12-8
1.65-2.50mm
5/8
P-12-10
*3/4
P-12-12
1/4
P-13-4
.0135-.0291
5/16
P-13-5
#80-#70
3/8
P-13-6
.35-.70mm
*1/2
P-13-8
1/4
P-13-4
.0292-.0519
5/16
P-13-5
3/8
P-13-6
#69-3/64
*1/2
P-13-8
.75-1.30mm
*3/4
P-13-12
1/4
P-13-4
13/64
5/16
P-13-5
.0520-.0634
.2046-.2043
3/8
P-13-6
#55-1/16
*1/2
P-13-8
(.213-.208 UNG)
1.35mm-1.60mm
*3/4
P-13-12
*1
P-13-16
1/4
P-13-4
5/16
P-13-5
.0635-.0995
3/8
P-13-6
1/2
P-13-8
#52-#39
*3/4
P-13-12
1.65-2.50mm
*1
P-13-16
*1-3/8 P-13-22
* Counterbored, leaving correct drill-bearing length and clearance
(see page 6 for bearing length).
.0135-.0291
#80-#70
.35-.70mm
Please see our web catalog for pricing.
This is the most-popular and least-expensive drill bushing. P

bushings are permanently pressed into the jig plate, usually
flush with the top surface. They are generally used for
single-step drilling or reaming operations when you do not
expect to replace bushings during the toolings lifetime. P
bushings can be mounted closer together than headed
bushings, but offer less resistance to heavy axial loads.
ANSI
PRICE
LENGTH PART NO.
1-5
OD
REAMER ID TOLERANCES:
From #60 to 1/4"
+.0005/+.0008
Over 1/4 to 1"
+.0006/+.0010
Over 1" to 1-1/2"
+.0008/+.0012
(3/07)
From 1 to 3mm
+.006/+.012mm
Over 3 to 6mm
+.010/+.018mm
Over 6 to 10mm +.013/+.022mm
Over 10 to 18mm +.016/+.027mm
Over 18 to 30mm +.020/+.033mm
(F6 tolerance)
QUANTITY DISCOUNTS
Quantity
Discount %
Multiplier
1
-5
Net
1.00
6
-11
18%
.82
12
-23
29%
.71
24
-49
34%
.66
50
-99
42%
.58
100
-199
48%
.52
200
-499
50%
.50
500
Up
52%
.48
9BU
P
OD
1/4
.0980-.1406
.2516-.2513
#40-9/64
2.50-3.50mm (.265-.260 UNG)
.1250-.1935
5/16
1/8-#10
.3141-.3138
3.20-4.90mm (.327-.322 UNG)
13/32
.1875-.2570
.4078-.4075
3/16-F
4.75-6.50mm (.421-.416 UNG)
7/16
.2340-.2900
.4392-.4389
A-L
5.90-7.40mm (.453-.448 UNG)
.1875-.3160
1/2
3/16-O
.5017-.5014
4.75-8.00mm (.520-.515 UNG)
ANSI
PART NO.
1/4
5/16
3/8
1/2
5/8
*3/4
*1
*1-3/8
*1-1/2
*1-3/4
1/4
5/16
3/8
1/2
5/8
3/4
*1
*1-3/8
*1-1/2
*1-3/4
1/4
5/16
3/8
1/2
5/8
3/4
*1
1/4
5/16
3/8
1/2
3/4
*1
*1-3/8
*1-1/2
*1-3/4
1/4
5/16
3/8
1/2
5/8
3/4
*1
1/4
5/16
3/8
1/2
3/4
*1
*1-3/8
*1-1/2
*1-3/4
*2-1/8
P-16-4
P-16-5
P-16-6
P-16-8
P-16-10
P-16-12
P-16-16
P-16-22
P-16-24
P-16-28
P-20-4
P-20-5
P-20-6
P-20-8
P-20-10
P-20-12
P-20-16
P-20-22
P-20-24
P-20-28
P-24-4
P-24-5
P-24-6
P-24-8
P-24-10
P-24-12
P-24-16
P-26-4
P-26-5
P-26-6
P-26-8
P-26-12
P-26-16
P-26-22
P-26-24
P-26-28
P-28-4
P-28-5
P-28-6
P-28-8
P-28-10
P-28-12
P-28-16
P-32-4
P-32-5
P-32-6
P-32-8
P-32-12
P-32-16
P-32-22
P-32-24
P-32-28
P-32-34
PRICE
1-5
ID
RANGE
OD
.2950-.3438
9/16
M-11/32
.5642-.5639
7.50-8.75mm (.582-.577 UNG)
5/8
.3125-.4375
.6267-.6264
5/16-7/16
7.90-11.00mm (.645-.640 UNG)
.1935-.2280
3/8
#10-#1
.3766-.3763
4.90-5.80mm (.390-.385 UNG)
LENGTH
3/4
.3125-.5312
.7518-.7515
5/16-17/32
7.90-13.50mm (.770-.765 UNG)
.5000-.6562
7/8
1/2-21/32
.8768-.8765
12.50-16.50mm (.895-.890 UNG)
LENGTH
ANSI
PART NO.
PRICE
1-5
1/4
5/16
3/8
1/2
5/8
3/4
1
1/4
5/16
3/8
1/2
5/8
3/4
1
1-1/4
1-3/8
1-1/2
1-3/4
2-1/8
1/4
5/16
3/8
1/2
5/8
3/4
1
1-1/4
1-3/8
1-1/2
1-3/4
2-1/8
*2-1/2
5/16
3/8
1/2
5/8
3/4
1
1-1/4
1-3/8
1-1/2
1-3/4
2-1/8
2-1/2
P-36-4
P-36-5
P-36-6
P-36-8
P-36-10
P-36-12
P-36-16
P-40-4
P-40-5
P-40-6
P-40-8
P-40-10
P-40-12
P-40-16
P-40-20
P-40-22
P-40-24
P-40-28
P-40-34
P-48-4
P-48-5
P-48-6
P-48-8
P-48-10
P-48-12
P-48-16
P-48-20
P-48-22
P-48-24
P-48-28
P-48-34
P-48-40
P-56-5
P-56-6
P-56-8
P-56-10
P-56-12
P-56-16
P-56-20
P-56-22
P-56-24
P-56-28
P-56-34
P-56-40
ID
RANGE
PRESS FIT
QUANTITY DISCOUNTS
Quantity
10BU
Discount %
Multiplier
1
-5
Net
1.00
6
-11
18%
.82
12
-23
29%
.71
24
-49
34%
.66
50
-99
42%
.58
100
-199
48%
.52
200
-499
50%
.50
500
Up
52%
.48
(3/07)
PRESS FIT
OD
ANSI
PART NO.
1/2
5/8
3/4
1
1-1/4
1-3/8
1-1/2
1-3/4
2-1/8
2-1/2
3
1/2
5/8
3/4
1
1-1/4
1-1/2
1-3/4
5/8
3/4
1
1-1/4
1-1/2
1-3/4
2
1/2
5/8
3/4
1
1-1/4
1-3/8
1-1/2
1-3/4
2
2-1/8
2-1/2
3
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/4
P-64-8
P-64-10
P-64-12
P-64-16
P-64-20
P-64-22
P-64-24
P-64-28
P-64-34
P-64-40
P-64-48
P-72-8
P-72-10
P-72-12
P-72-16
P-72-20
P-72-24
P-72-28
P-80-10
P-80-12
P-80-16
P-80-20
P-80-24
P-80-28
P-80-32
P-88-8
P-88-10
P-88-12
P-88-16
P-88-20
P-88-22
P-88-24
P-88-28
P-88-32
P-88-34
P-88-40
P-88-48
P-96-12
P-96-16
P-96-20
P-96-24
P-96-28
P-96-32
P-96-36
1
.5000-.7656
1.0018-1.0015
1/2-49/64
12.50-19.50mm (1.020-1.015 UNG)
.7656-.8438
1-1/8
49/64-27/32
1.1270-1.1267
19.50-21.50mm (1.145-1.140 UNG)
.8594-.9375
1-1/4
55/64-15/16
1.2520-1.2517
22.00-24.00mm (1.270-1.265 UNG)
.6250-1.0312
1-3/8
5/8-1-1/32
1.3772-1.3768
16.00-26.00mm (1.395-1.390 UNG)
1.0156-1.1250
1-1/2
1-1/64-1-1/8
1.5021-1.5018
26.00-29.00mm (1.520-1.515 UNG)
PRICE
1-5
ID
RANGE
OD
1.0000-1.3906
1-3/4
1-1-25/64
1.7523-1.7519
25.00-35.00mm (1.770-1.765 UNG)
2-1/4
1.3750-1.7656
1-3/8-1-49/64 2.2525-2.2521
35.00-45.00mm (2.270-2.265 UNG)
LENGTH
LENGTH
ANSI
PART NO.
PRICE
1-5
3/4
1
1-3/8
1-1/2
1-3/4
2-1/8
2-1/2
3
1
1-3/8
1-1/2
1-3/4
2-1/8
2-1/2
3
P-112-12
P-112-16
P-112-22
P-112-24
P-112-28
P-112-34
P-112-40
P-112-48
P-144-16
P-144-22
P-144-24
P-144-28
P-144-34
P-144-40
P-144-48
Please see our web catalog

for pricing.
ID
RANGE
For extended-range bushings (larger sizes) please see our web

catalog.
Have a problem?
Carr Lane can help
you pin it down,
with
L Pins,
T Pins,
Locking Pins,
Clamping Pins,
Ball-Lock Pins,
Lifting Pins,
QUANTITY DISCOUNTS
Quantity
Discount %
Multiplier
(3/07)
1
-5
Net
1.00
6
-11
18%
.82
12
-23
29%
.71
24
-49
34%
.66
50
-99
42%
.58
100
-199
48%
.52
200
-499
50%
.50
500
Up
52%
.48
and More.
11BU
PRESS FIT
CARBIDE
ID
RANGE
.0280-.0468
#70-#56
.75-1.15mm
.0469-.0625
3/64-1/16
1.20-1.55mm
.0550-.0995
#54-#39
1.40-2.50mm
.0995-.1360
#39-#29
2.55-3.40mm
.1285-.1875
#30-3/16
3.30-4.75mm
.1875-.2500
3/16-1/4
4.80-6.30mm
.2188-.3125
7/32-5/16
5.60-7.90mm
.3125-.4219
5/16-27/64
8.00-10.50mm
.3750-.5000
3/8-1/2
9.60-12.50mm
.5000-.6250
1/2-5/8
13.00-15.50mm
OD
LENGTH
ANSI
PART NO.
5/16
PC-10-5
1/2
PC-10-8
5/16
PC-10-5
1/2
PC-10-8
13/64
.2046-.2043
5/16
PC-13-5
1/2
PC-13-8
1/4
.2516-.2513
5/16
PC-16-5
5/32
.1578-.1575
5/16
.3141-.3138
13/32
.4078-.4075
1/2
.5017-.5014
5/8
.6267-.6264
3/4
.7518-.7515
7/8
.8768-.8765
1/2
PC-16-8
5/16
PC-20-5
1/2
PC-20-8
3/4
PC-20-12
PC-20-16
5/16
PC-26-5
1/2
PC-26-8
3/4
PC-26-12
PRICE
1-5
Contact
Factory
Contact
Factory
ID
RANGE
PC
OD
.5000-.7500
1
1/2-3/4
1.0018-1.0015
13.00-19.00mm
Contact
Factory
Contact
Factory
.7500-1.0000
1-3/8
3/4-1
1.3772-1.3768
19.50-25.00mm
Contact
Factory
Contact
Factory
1.0000-1.3750
1-3/4
11-3/8
1.7523-1.7519
26.00-34.00mm
LENGTH
ANSI
PART NO.
1/2
PC-64-8
3/4
PC-64-12
PC-64-16
1-3/8
PC-64-22
1-3/4
PC-64-28
3/4
PC-88-12
PC-88-16
1-3/8
PC-88-22
1-3/4
PC-88-28
2-1/8
PC-88-34
2-1/2
PC-88-40
PC-112-16
1-3/8
PC-112-22
1-3/4
PC-112-28
2-1/8
PC-112-34
PRICE
1-5
Contact
Factory
Contact
Factory
Contact
Factory
PC-26-16
2-1/2
PC-112-40
5/16
PC-32-5
PC-112-48
1/2
PC-32-8
PC-144-16
1-3/8
PC-144-22
1-3/4
2-1/8
PC-144-28 Contact
PC-144-34 Factory
2-1/2
PC-144-40
PC-144-48
3/4
PC-32-12
PC-32-16
1-3/8
PC-32-22
1/2
PC-40-8
3/4
PC-40-12
PC-40-16
1-3/8
PC-40-22
1/2
PC-48-8
3/4
PC-48-12
PC-48-16
1-3/8
PC-48-22
1/2
PC-56-8
3/4
PC-56-12
PC-56-16
1-3/8
PC-56-22
1-3/4
PC-56-28
Contact
Factory
Contact
Factory
Contact
Factory
Contact
Factory
1.3750-1.7500
2-1/4
1-3/8-1-3/4
2.2525-2.2521
35.00-44.00mm
Check out Carr Lanes

CAD/CAM library
of tooling components,
the Tool Designers Assistant,
available in 2-D or 3-D,
micro-based workstation
or mainframe.
See our ad in the front of this book.
12BU
(5/99)
PRESS FIT
METRIC
PM
OD
(s6)
ID RANGE
(G6)
.35-1.00mm
5mm
5.027-5.019mm
2.61-3.30mm
6mm
6.027-6.019mm
3.31-4.00mm
7mm
7.032-7.023mm
4.01-5.00mm
8mm
8.032-8.023mm
5.01-6.00mm
10mm
10.032-10.023mm
6.01-8.00mm
12mm
12.039-12.028mm
15mm
8.01-10.00mm 15.039-15.028mm
18mm
10.01-12.00mm 18.039-18.028mm
22mm
12.01-15.00mm 22.048-22.035mm
26mm
15.01-18.00mm 26.048-26.035mm
30mm
18.01-22.00mm 30.048-30.035mm
35mm
22.01-26.00mm 35.059-35.043mm
42mm
26.01-30.00mm 42.059-42.043mm
48mm
30.01-35.00mm 48.059-48.043mm
55mm
35.01-42.00mm 55.072-55.053mm
62mm
42.01-48.00mm 62.072-62.053mm
*6mm
*9mm
6mm
9mm
6mm
9mm
8mm
12mm
16mm
8mm
12mm
16mm
8mm
12mm
16mm
10mm
16mm
20mm
10mm
16mm
20mm
12mm
20mm
25mm
12mm
20mm
25mm
16mm
28mm
36mm
16mm
28mm
36mm
20mm
36mm
45mm
20mm
36mm
45mm
25mm
45mm
56mm
25mm
45mm
56mm
30mm
56mm
67mm
30mm
56mm
67mm
PM-4-6
PM-4-9
PM-4-6
PM-4-9
PM-5-6
PM-5-9
PM-6-8
PM-6-12
PM-6-16
PM-7-8
PM-7-12
PM-7-16
PM-8-8
PM-8-12
PM-8-16
PM-10-10
PM-10-16
PM-10-20
PM-12-10
PM-12-16
PM-12-20
PM-15-12
PM-15-20
PM-15-25
PM-18-12
PM-18-20
PM-18-25
PM-22-16
PM-22-28
PM-22-36
PM-26-16
PM-26-28
PM-26-36
PM-30-20
PM-30-36
PM-30-45
PM-35-20
PM-35-36
PM-35-45
PM-42-25
PM-42-45
PM-42-56
PM-48-25
PM-48-45
PM-48-56
PM-55-30
PM-55-56
PM-55-67
PM-62-30
PM-62-56
PM-62-67
PRICE
1-5
Discount %
Multiplier
(7/01)
1
-5
Net
1.00
6
-11
18%
.82
12
-23
29%
.71
24
-49
34%
.66
50
-99
42%
.58
100
-199
48%
.52
200
-499
50%
.50
ANSI
PART NO.
30mm
56mm
67mm
35mm
78mm
55.01-63.00mm 78.078-78.059mm 67mm
78mm
35mm
85mm
63.01-70.00mm 85.093-85.071mm 67mm
78mm
40mm
95mm
70.01-78.00mm 95.093-95.071mm 78mm
105mm
40mm
105mm
78.01-85.00mm 105.101-105.079mm 78mm
105mm
45mm
115mm
85.01-95.00mm 115.101-115.079mm 89mm
112mm
45mm
125mm
95.01-105.00mm 125.117-125.092mm 89mm
112mm
PM-70-30
PM-70-56
PM-70-67
PM-78-35
PM-78-67
PM-78-78
PM-85-35
PM-85-67
PM-85-78
PM-95-40
PM-95-78
PM-95-105
PM-105-40
PM-105-78
PM-105-105
PM-115-45
PM-115-89
PM-115-112
PM-125-45
PM-125-89
PM-125-112
OD
(s6)
70mm
70.078-70.059mm
PRICE
1-5
* Small metric drill sizes through .80mm are counterbored 1.00mm

diameter, with 3mm drill-bearing length.
A mans real
limitations
are not the things
he wants to do
and cannot;
they are the things
he ought to do
but does not.
QUANTITY DISCOUNTS
Quantity
LENGTH
ID RANGE
(G6)
48.01-55.00mm
1.81-2.60mm
ANSI
PART NO.
1.01-1.80mm
4mm
4.027-4.019mm
LENGTH
500
Up
52%
.48
13BU
HEAD PRESS FIT

H-20-16U-.1250
Unground OD
H-20-16-.1250 REAMER Reamer tolerance on ID
H-20-16-.1250 NCB
HC-20-16-.1250
Carbide bushing
HM-8-12-4.50
USA
BODY
OD
5/32
13/64
1/4
5/16
3/8
13/32
7/16
1/2
9/16
5/8
3/4
7/8
1
1-1/4
1-3/8
1-3/4
2-1/4

ground or unground OD, for a standard drill size within the
stated ID range. See back cover for decimal equivalents. To
price non-standard sizes, including all reamer and tap-guide
bushings, see page 7.
METRIC
F DIA
1/4
19/64
23/64
27/64
1/2
1/2
9/16
39/64
11/16
51/64
59/64
1-7/64
1-15/64
1-1/2
1-39/64
1-63/64
2-31/6
3/32
3/32
3/32
1/8
3/32
5/32
3/32
7/32
3/32
7/32
7/32
1/4
5/16
1/4
3/8
3/8
3/8
BODY
OD
4mm
5mm
6mm
7mm
8mm
10mm
12mm
15mm
18mm
22mm
26mm
30mm
35mm
42mm
48mm
55mm
62mm
70mm
78mm
85mm
95mm
105mm
115mm
125mm
F DIA
7mm
8mm
9mm
10mm
11mm
13mm
15mm
18mm
22mm
26mm
30mm
34mm
39mm
46mm
52mm
59mm
66mm
74mm
82mm
90mm
100mm
110mm
120mm
130mm
2mm
2mm
2.5mm
2.5mm
2.5mm
3mm
3mm
3mm
4mm
4mm
4mm
5mm
5mm
5mm
5mm
5mm
6mm
6mm
6mm
6mm
6mm
6mm
6mm
6mm
From #80 to 1/4"
+.0001/+.0004
Over 1/4 to 3/4"
+.0001/+.0005
Over 3/4 to 1-1/2"
+.0002/+.0006
Over 1-1/2 to 2-3/4" +.0003/+.0007
From .35 to 3mm

+.002/+.008mm
Over 3 to 6mm
+.004/+.012mm
Over 6 to 10mm
+.005/+.014mm
Over 10 to 18mm
+.006/+.017mm
Over 18 to 30mm
+.007/+.020mm
Over 30 to 50mm
+.009/+.025mm
Over 50 to 80mm
+.010/+.029mm
Over 80 to 120mm +.012/+.034mm
(G6 tolerance)
From #60 a 1/4"
+.0005/+.0008
Over 1/4 to 1"
+.0006/+.0010
Over 1 to 1-1/2"
+.0008/+.0012
From 1 to 3mm
+.006/+.012mm
Over 3 to 6mm
+.010/+.018mm
Over 6 to 10mm
+.013/+.022mm
Over 10 to 18mm
+.016/+.027mm
Over 18 to 30mm
+.020/+.033mm
(F6 tolerance)
OD
LENGTH
ANSI
PART NO.
PRICE
1-5
5/32
.1578-.1575
(.166-.161 UNG)
1/4
5/16
*3/8
*1/2
1/4
5/16
*3/8
*1/2
*3/4
1/4
5/16
3/8
*1/2
*3/4
H-10-4
H-10-5
H-10-6
H-10-8
H-10-4
H-10-5
H-10-6
H-10-8
H-10-12
H-10-4
H-10-5
H-10-6
H-10-8
H-10-12
27.38
28.03
28.73
29.05
24.27
24.66
25.35
25.98
28.53
19.34
19.34
20.05
20.37
22.61
ID
RANGE
.0135-.0291
#80-#70
.35-.70mm
.0292-.0519
#69-3/64
.75-1.25mm
.0520-.0625
#55-1/16
1.30-1.60mm
Please see our web

catalog for pricing.
APPLICATIONS:
Similar to a P bushing, but with a head to resist heavy axial
loads. H bushings are permanently pressed into the jig plate.
They are generally used for single-step drilling or reaming operations when you do not expect to replace bushings during the
toolings lifetime. The head can be left exposed, or recessed by
counterboring the installation hole. Note: The length listed
for a USA head-press-fit bushing refers to its length under
the head, while the metric versions length is its overall
length.
* Counterbored, leaving correct drill-bearing length and chip clearance (see page 6 for bearing length).
QUANTITY DISCOUNTS
ORDERING EXAMPLES:
H-20-16-.1250
H-20-16-.1772
14BU

(.1772 = 4.50mm)
Quantity
Discount %
Multiplier
1
-5
Net
1.00
6
-11
18%
.82
12
-23
29%
.71
24
-49
34%
.66
50
-99
42%
.58
100
-199
48%
.52
200
-499
50%
.50
500
Up
52%
.48
(12/07)
HEAD PRESS FIT

OD
.0135-.0291
#80-#70
.35-.70mm
.0292-.0519
#69-3/64
.75-1.30mm
.0520-.0634
#55-1/16
1.35-1.60mm
13/64
.2046-.2043
(.213-.208 UNG)
.0635-.0995
#52-#39
1.65-2.50mm
.1250-.1935
5/16
1/8-#10
.3141-.3138
3.20-4.90mm (.327-.322 UNG)
3/8
.1935-.2280
.3766-.3763
#10-#1
4.90-5.80mm (.390-.385 UNG)
.1875-.2570
3/16-F
4.75-6.50mm
13/32
.4078-.4075
(.421-.416 UNG)
ANSI
PART NO.
1/4
5/16
*3/8
*1/2
1/4
5/16
*3/8
*1/2
*3/4
1/4
5/16
3/8
*1/2
*3/4
*1
1/4
5/16
3/8
*1/2
*3/4
*1
1/4
5/16
3/8
*1/2
*5/8
*3/4
*1
*1-3/8
*1-1/2
1/4
5/16
3/8
1/2
5/8
3/4
*1
*1-3/8
*1-1/2
1/4
5/16
3/8
1/2
5/8
3/4
*1
1/4
5/16
3/8
1/2
3/4
*1
*1-3/8
*1-1/2
*1-3/4
H-13-4
H-13-5
H-13-6
H-13-8
H-13-4
H-13-5
H-13-6
H-13-8
H-13-12
H-13-4
H-13-5
H-13-6
H-13-8
H-13-12
H-13-16
H-13-4
H-13-5
H-13-6
H-13-8
H-13-12
H-13-16
H-16-4
H-16-5
H-16-6
H-16-8
H-16-10
H-16-12
H-16-16
H-16-22
H-16-24
H-20-4
H-20-5
H-20-6
H-20-8
H-20-10
H-20-12
H-20-16
H-20-22
H-20-24
H-24-4
H-24-5
H-24-6
H-24-8
H-24-10
H-24-12
H-24-16
H-26-4
H-26-5
H-26-6
H-26-8
H-26-12
H-26-16
H-26-22
H-26-24
H-26-28
PRICE
1-5
OD
LENGTH
ANSI
PART NO.
PRICE
1-5
1/4
5/16
3/8
1/2
5/8
3/4
*1
1/4
5/16
3/8
1/2
3/4
*1
*1-3/8
*1-1/2
*1-3/4
1/4
5/16
3/8
1/2
5/8
3/4
1
1/4
5/16
3/8
1/2
5/8
3/4
1
1-3/8
1-1/2
1-3/4
2-1/8
1/4
5/16
3/8
1/2
5/8
3/4
1
1-1/4
1-3/8
1-1/2
1-3/4
2-1/8
H-28-4
H-28-5
H-28-6
H-28-8
H-28-10
H-28-12
H-28-16
H-32-4
H-32-5
H-32-6
H-32-8
H-32-12
H-32-16
H-32-22
H-32-24
H-32-28
H-36-4
H-36-5
H-36-6
H-36-8
H-36-10
H-36-12
H-36-16
H-40-4
H-40-5
H-40-6
H-40-8
H-40-10
H-40-12
H-40-16
H-40-22
H-40-24
H-40-28
H-40-34
H-48-4
H-48-5
H-48-6
H-48-8
H-48-10
H-48-12
H-48-16
H-48-20
H-48-22
H-48-24
H-48-28
H-48-34
1/2
.1875-.3160
.5017-.5014
3/16-O
4.75-8.00mm (.520-.515 UNG)
* Counterbored, leaving correct drill-bushing length and clearance

(12/07)
ID
RANGE
.2340-.2900
7/16
A-L
.4392-.4389
5.90-7.40mm (.453-.448 UNG)
.0980-.1406
1/4
#40-9/64
.2516-.2513
2.50-3.50mm (.265-.260 UNG)
LENGTH
ID
RANGE
.2950-.3438
M-11/32
7.50-8.75mm
9/16
.5642-.5639
(.582-.577 UNG)
5/8
.3125-.4375
.6267-.6264
5/16-7/16
7.90-11.00mm (.645-.640 UNG)
.3125-.5312
3/4
5/16-17/32
.7518-.7515
7.90-13.50mm (.770-.765 UNG)
QUANTITY DISCOUNTS
Quantity
Discount %
Multiplier
1
-5
Net
1.00
6
-11
18%
.82
12
-23
29%
.71
24
-49
34%
.66
50
-99
42%
.58
100
-199
48%
.52
200
-499
50%
.50
500
Up
52%
.48
15BU
HEAD PRESS FIT

ID
RANGE
LENGTH
OD
ANSI
PART NO.
PRICE
1-5
H-56-8
1/2
H-56-10
5/8
H-56-12
3/4
H-56-16
1
7/8
.5000-.6562
1-1/4 H-56-20
.8768-.8765
1/2-21/32
(.895-.890 UNG) 1-3/8 H-56-22
12.50-16.50mm
1-1/2 H-56-24
1-3/4 H-56-28
2-1/8 H-56-34
2-1/2 H-56-40
H-64-8
1/2
H-64-12
3/4
H-64-16
1
.5000-.7656
1
1-3/8 H-64-22
1/2-49/64
1.0018-1.0015 1-1/2 H-64-24
12.50-19.50mm (1.020-1.015 UNG) 1-3/4 H-64-28
2-1/8 H-64-34
2-1/2 H-64-40
H-64-48
3
H-80-10
5/8
H-80-12
3/4
1-1/4
.8594-.9375
H-80-16
1
1.2520-1.2517 1-1/4 H-80-20
55/64-15/16
22.00-24.00mm (1.270-1.265 UNG) 1-1/2 H-80-24
1-3/4 H-80-28
H-80-32
2
H-88-8
1/2
H-88-12
3/4
H-88-16
1
.6250-1.0312
1-3/8
1-3/8 H-88-22
5/81-1/32
1.3772-1.3768 1-1/2 H-88-24
16.00-26.00mm (1.395-1.390 UNG) 1-3/4 H-88-28
2-1/8 H-88-34
2-1/2 H-88-40
H-88-48
3
H-112-12
3/4
H-112-16
1
1-3/8 H-112-22
1.0000-1.3906
1-3/4
11-25/64
1.7523-1.7519 1-1/2 H-112-24
26.00-35.00mm (1.770-1.765 UNG) 1-3/4 H-112-28
2-1/8 H-112-34
2-1/2 H-112-40
H-112-48
3
H-144-16
1
1-3/8 H-144-22
1.3750-1.7656
2-1/4
1-1/2 H-144-24
1-3/8-1-49/64
2.2525-2.2521 1-3/4 H-144-28
35.00-45.00mm (2.270-2.265 UNG) 2-1/8 H-144-34
2-1/2 H-144-40
H-144-48
3
catalog.
A great speaker
is one
whose spirit
enters the souls
of his listeners.
If you have
no goals
you have
nothing
to reach for.
QUANTITY DISCOUNTS
Quantity
Discount %
Multiplier
16BU
1
-5
Net
1.00
6
-11
18%
.82
12
-23
29%
.71
24
-49
34%
.66
50
-99
42%
.58
100
-199
48%
.52
200
-499
50%
.50
500
Up
52%
.48
(7/04)
HEAD PRESS FIT

CARBIDE
ID
RANGE
.0280-.0468
#70-#56
.75-1.15mm
.0469-.0625
3/64-1/16
1.20-1.55mm
.0550-.0995
#54-#39
1.40-2.50mm
.0995-.1360
#39-#29
2.55-3.40mm
.1285-.1875
#30-3/16
3.30-4.75mm
.1875-.2500
3/16-1/4
4.80-6.30mm
.2188-.3125
7/32-5/16
5.60-7.90mm
.3125-.4219
5/16-27/64
8.00-10.50mm
.3750-.5000
3/8-1/2
9.60-12.50mm
.5000-.6250
1/2-5/8
13.00-15.50mm
LENGTH
ANSI
PART NO.
PRICE
1-5
5/16
HC-10-5
1/2
HC-10-8
Contact
Factory
5/16
HC-10-5
1/2
HC-10-8
13/64
.2046-.2043
5/16
HC-13-5
1/2
HC-13-8
1/4
.2516-.2513
5/16
HC-16-5
1/2
HC-16-8
5/16
HC-20-5
1/2
HC-20-8
3/4
HC-20-12
HC-20-16
5/16
HC-26-5
1/2
HC-26-8
OD
5/32
.1578-.1575
5/16
.3141-.3138
13/32
.4078-.4075
1/2
.5017-.5014
5/8
.6267-.6264
3/4
.7518-.7515
7/8
.8768-.8765
Contact
Factory
Contact
Factory
Contact
Factory
5/16
HC-32-5
1/2
HC-32-8
3/4
Contact
HC-32-12
Factory
HC-32-16
1/2
HC-40-8
3/4
HC-40-12 Contact
HC-40-16 Factory
3/4
HC-48-12
HC-48-22
1/2
HC-56-8
3/4
HC-56-12
HC-56-16
1-3/8
HC-56-22
1-3/4
HC-56-28
.7500-1.0000
3/4-1
19.50-25.00mm
HC-64-16
Contact
Factory
1-3/8
1.3772-1.3768
3/4
HC-88-12
HC-88-16
1-3/8 HC-88-22
1-3/4 HC-88-28
Contact
Factory
2-1/8 HC-88-34
2-1/2 HC-88-40
1.0000-1.3750
1-1-3/8
26.00-34.00mm
HC-112-16
1-3/4 HC-112-28
1-3/4
1.7523-1.7519
HC-112-32
Contact
Factory
2-1/8 HC-112-34
Contact
Factory
HC-112-48
HC-144-16
1-3/8 HC-144-22
2-1/4
2.2525-2.2521
1-3/4 HC-144-28 Contact

Factory
2-1/8 HC-144-34
2-1/2 HC-144-40
3
180 Pivot
Note: Due to manufacturing requirements, head dimensions of some

carbide bushings may differ slightly from ANSI standards. Most carbide bushings have steel heads.
(5/99)
HC-64-12
1-3/4 HC-64-28
Contact
HC-48-16 Factory
1-3/8
HC-64-8
3/4
1-3/8 HC-64-22
1.3750-1.7500
1-3/81-3/4
35.00-44.00mm
HC-32-22
HC-48-8
1/2
PRICE
1-5
2-1/2 HC-112-40
1-3/8
1/2
ANSI
PART NO.
1-3/8 HC-112-22
HC-26-16
HC-40-22
LENGTH
1-3/8
1
1.0018-1.0015
Contact
Factory
HC-26-12
.5000-.7500
1/2-3/4
13.00-19.00mm
OD
Contact
Factory
3/4
ID
RANGE
HC
HC-144-48
What pivots 180

and takes more tugging
than an eye bolt?
360 Rotation
Swivel Hoist Rings

from Carr Lane, of course.
17BU
HEAD PRESS FIT

METRIC
HM
.35-1.00mm
1.01-1.80mm
ANSI
PART NO.
*6mm
*9mm
6mm
9mm
6mm
9mm
8mm
12mm
16mm
8mm
12mm
16mm
8mm
12mm
16mm
10mm
16mm
20mm
10mm
16mm
20mm
12mm
20mm
25mm
12mm
20mm
25mm
16mm
28mm
36mm
16mm
28mm
36mm
20mm
36mm
45mm
20mm
36mm
45mm
25mm
45mm
56mm
25mm
45mm
56mm
30mm
56mm
67mm
30mm
56mm
67mm
HM-4-6
HM-4-9
HM-4-6
HM-4-9
HM-5-6
HM-5-9
HM-6-8
HM-6-12
HM-6-16
HM-7-8
HM-7-12
HM-7-16
HM-8-8
HM-8-12
HM-8-16
HM-10-10
HM-10-16
HM-10-20
HM-12-10
HM-12-16
HM-12-20
HM-15-12
HM-15-20
HM-15-25
HM-18-12
HM-18-20
HM-18-25
HM-22-16
HM-22-28
HM-22-36
HM-26-16
HM-26-28
HM-26-36
HM-30-20
HM-30-36
HM-30-45
HM-35-20
HM-35-36
HM-35-45
HM-42-25
HM-42-45
HM-42-56
HM-48-25
HM-48-45
HM-48-56
HM-55-30
HM-55-56
HM-55-67
HM-62-30
HM-62-56
HM-62-67
4mm
4.027-4.019mm
1.81-2.60mm
5mm
5.027-5.019mm
2.61-3.30mm
6mm
6.027-6.019mm
3.31-4.00mm
7mm
7.032-7.023mm
4.01-5.00mm
8mm
8.032-8.023mm
5.01-6.00mm
10mm
10.032-10.023mm
6.01-8.00mm
12mm
12.039-12.028mm
8.01-10.00mm
15mm
15.039-15.028mm
18mm
10.01-12.00mm 18.039-18.028mm
22mm
12.01-15.00mm 22.048-22.035mm
26mm
15.01-18.00mm 26.048-26.035mm
30mm
18.01-22.00mm 30.048-30.035mm
35mm
22.01-26.00mm 35.059-35.043mm
42mm
26.01-30.00mm 42.059-42.043mm
48mm
30.01-35.00mm 48.059-48.043mm
55mm
35.01-42.00mm 55.072-55.053mm
42.01-48.00mm
62mm
62.072-62.053mm
PRICE
1-5
Discount %
Multiplier
18BU
1
-5
Net
1.00
6
-11
18%
.82
12
-23
29%
.71
24
-49
34%
.66
50
-99
42%
.58
100
-199
48%
.52
200
-499
50%
.50
LENGTH
30mm
56mm
67mm
35mm
78mm
55.01-63.00mm 78.078-78.059mm 67mm
78mm
35mm
85mm
63.01-70.00mm 85.093-85.071mm 67mm
78mm
40mm
95mm
70.01-78.00mm 95.093-95.071mm 78mm
105mm
40mm
105mm
78.01-85.00mm 105.101-105.079mm 78mm
105mm
45mm
115mm
85.01-95.00mm 115.101-115.079mm 89mm
112mm
45mm
125mm
95.01-105.00mm 125.117-125.092mm 89mm
112mm
70mm
70.078-70.059mm
ANSI
PART NO.
PRICE
1-5
HM-70-30
HM-70-56
HM-70-67
HM-78-35
HM-78-67
HM-78-78
HM-85-35
HM-85-67
HM-85-78
HM-95-40
HM-95-78
HM-95-105
HM-105-40
HM-105-78
HM-105-105
HM-115-45
HM-115-89
HM-115-112
HM-125-45
HM-125-89
HM-125-112

Note: The length listed on this page for a metric head-press-fit

bushing refers to its overall length, while the USA versions
length is its length under the head.
CARR LANE:
QUANTITY DISCOUNTS
Quantity
OD
(s6)
ID RANGE
(G6)
48.01-55.00mm
LENGTH
OD
(s6)
ID RANGE
(G6)
500
Up
52%
.48
Were often
imitated . . .
but never
duplicated!
(7/01)
SP
SERRATED PRESS FIT

1/2
LENGTH
LENGTH
OD
APPLICATIONS:
Similar to a P bushing, but with top serrations to prevent rotation in soft materials. Recommended in high-torque situations
for materials such as magnesium, aluminum, masonite, or
wood. Finish-ground OD ensures accurate ID location. Serrations also resist axial force to prevent pushing the bushing
through the jig plate.
ORDERING EXAMPLES:
SP-26-16-.1875
SP-26-16-.1772

(.1772 - 4.50mm)
SP-26-16-.1875 REAMER Reamer tolerance on ID
SP-26-16-.1875 NCB
SPM-8-12-4.50
Prices shown here apply to standard bushings only, for a
standard drill size within the stated ID range. See back cover
for decimal equivalents. To price non-standard sizes, including all reamer and tap-guide bushings, see page 7.
OD
.0520-.0995
#55-#39
1.35-2.50mm
13/64
.2031-.2029
.0980-.1406
#40-9/64
2.50-3.50mm
1/4
.2500-.2498
.1250-.1935
1/8-#10
3.20-4.90mm
5/16
.3125-.3123
.1562-.2570
5/32-F
4.00-6.50mm
13/32
.4062-.4060
.1562-.3160
5/32-O
4.00-8.00mm
1/2
.5000-.4998
.3125-.4375
5/16-7/16
7.90-11.00mm
5/8
.6250-.6248
.3125-.5312
5/16-17/32
8.00-13.00mm
3/4
.7500-.7498
.5000-.6562
7/8
1/2-21/32
.8750-.8748
13.00-16.50mm
.5000-.7656
1
1/2-49/64
1.0000-.9998
13.00-19.00mm
LENGTH
ANSI
PART NO.
1/4
5/16
3/8
1/2
1/4
5/16
3/8
1/2
1/4
5/16
3/8
1/2
3/4
5/16
3/8
1/2
3/4
*1
5/16
3/8
1/2
3/4
*1
3/8
1/2
3/4
1
3/8
1/2
3/4
1
3/8
1/2
3/4
1
1/2
3/4
1
1-3/8
SP-13-4
SP-13-5
SP-13-6
SP-13-8
SP-16-4
SP-16-5
SP-16-6
SP-16-8
SP-20-4
SP-20-5
SP-20-6
SP-20-8
SP-20-12
SP-26-5
SP-26-6
SP-26-8
SP-26-12
SP-26-16
SP-32-5
SP-32-6
SP-32-8
SP-32-12
SP-32-16
SP-40-6
SP-40-8
SP-40-12
SP-40-16
SP-48-6
SP-48-8
SP-48-12
SP-48-16
SP-56-6
SP-56-8
SP-56-12
SP-56-16
SP-64-8
SP-64-12
SP-64-16
SP-64-22
PRICE
1-5
ID
ID
RANGE
* Counterbored, leaving correct drill-bushing length and clearance

From #55 to 1/4"
+.0001/+.0004
Over 1/4 to 3/4"
+.0001/+.0005
Over 3/4 to 1-1/2
+.0002/+.0006
From 1 to 3mm
+.002/+.008mm
Over 3 to 6mm
+.004/+.012mm
Over 6 to 10mm
+.005/+.014mm
Over 10 to 18mm
+.006/+.017mm
Over 18 to 19mm
+.007/+.020mm
(G6 tolerance)
From #60 to 1/4"
+.0005/+.0008
Over 1/4 to 1"
+.0006/+.0010
(7/01)
From 1 to 3mm
+.006/+.012mm
Over 3 to 6mm
+.010/+.018mm
Over 6 to 10mm
+.013/+.022mm
Over 10 to 18mm
+.016/+.027mm
Over 18 to 19mm
+.020/+.033mm
(F6 tolerance)
QUANTITY DISCOUNTS
Quantity
Discount %
Multiplier
1
-5
Net
1.00
6
-11
18%
.82
12
-23
29%
.71
24
-49
34%
.66
50
-99
42%
.58
100
-199
48%
.52
200
-499
50%
.50
500
Up
52%
.48
19BU
SPM
SERRATED PRESS FIT

METRIC
OD
(h5)
ID RANGE
(G6)
1.00-1.80mm
5mm
5.000-4.995mm
1.81-2.60mm
2.61-3.30mm
ANSI
PART NO.
LENGTH
6mm
6.000-5.995mm
6mm
SPM-5-6
9mm
SPM-5-9
6mm
SPM-5-6
9mm
SPM-5-9
8mm
SPM-6-8
PRICE
1-5
We Make Tooling
Simple
The worlds largest
12mm SPM-6-12
manufacturer of tooling
16mm SPM-6-16
8mm
3.31-4.00mm
7mm
7.000-6.994mm
12mm SPM-7-12
you need for todays
16mm SPM-7-16
changing industry.
8mm
8.000-7.994mm
SPM-8-8
12mm SPM-8-12
16mm SPM-8-16
10mm SPM-10-10
5.01-6.00mm
10mm
10.000-9.994mm
16mm SPM-10-16
20mm SPM-10-20
10mm SPM-12-10
6.01-8.00mm
12mm
16mm SPM-12-16
12.000-11.992mm
20mm SPM-12-20
12mm SPM-15-12
15mm
8.01-10.00mm
20mm SPM-15-20
15.000-14.992mm
8mm
4.01-5.00mm
components has the parts
SPM-7-8
25mm SPM-15-25
20BU
24
-49
34%
.66
50
-99
42%
.58
100
-199
48%
.52
200
-499
50%
.50
Toggle Clamps
items are available in

stainless steel. Send for
Drill Bushings
Chuck Jaws
QUANTITY DISCOUNTS
Discount %
Multiplier
and U.S sizes. Many
anywhere.
36mm SPM-26-36
12
-23
29%
.71
available in both metric
16mm SPM-22-16
26mm
28mm SPM-26-28
26.000-25.991mm
6
-11
18%
.82
Alignment Pins
Most of our items are
of tooling components
16mm SPM-26-16
1
-5
Net
1.00
tooling sources.
25mm SPM-18-25
36mm SPM-22-36
Quantity
to look for several
with the widest assortment
18mm
20mm SPM-18-20
18.000-17.992mm
22mm
12.01-15.00mm 22.000-21.991mm 28mm SPM-22-28
15.01-18.00mm
Handles & Knobs
since you dont have
our free illustrated catalog
12mm SPM-18-12
10.01-12.00mm
We can save you time,
500
Up
52%
.48
Specialty Clamps
Spring-Loaded Devices
Locators
Nuts, Bolts, Washers, Screws
Clamps Straps
Jig and Fixture Bases
Plug Gages
Supports, Rests and Feet
Threaded Inserts
CAD/CAM Tooling Library
Modular Fixturing
Hoist Rings
(7/01)
SLIP/FIXED RENEWABLE
SF
APPLICATIONS:
Replaceable bushing generally used with a liner bushing and
lockscrew. Use when you expect to replace bushings during
the toolings lifetime, or when you want to switch bushings to
perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and
F-type fixed-renewable bushings: One side has a small recess
for fixed mounting; the other has a locking recess that allows
the bushing to slip down, then lock in place by rotating it. S
and F types are now obsolete (except in carbide) and combination SF bushings will be furnished at no extra charge.
USA
BODY
OD
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
1-1/4
1-3/8
1-1/2
1-3/4
2-1/4
F
DIA
3/16 3/32
5/16
7/16
35/64
5/8
5/8
1/4
1/8
51/64
7/8
7/8
1-3/64
1-1/4
1-27/64
1-5/8
3/8 3/16
1-51/64
1-7/8
2-19/64
3/8 3/16
2-51/64
3/32
9/64
11/64
15/64
15/64
19/64
23/64
23/64
27/64
31/64
19/32
43/64
25/32
51/64
1
1-1/4
55
30
65
30
30
65
65
30
50
30
35
30
30
30
30
25
17/64
23/64
5/8
1/2
29/64
29/64
3/4
5/8
37/64
37/64
7/8
3/4
53/64
1-7/64
59/64
1-1/64
1-19/64 1-7/64
1-9/64
1-41/64 1-25/64
1-57/64 1-41/64
LOCK
SCREW
SF-20-16-.1250
SF-20-16-.1772
LS-2
Prices shown here apply to standard bushings only, for a standard drill size within the stated ID range. See back cover for
decimal equivalents. To price non-standard sizes, including all
reamer and tap-guide bushings, see page 7.
LS-3
8mm
10mm
12mm
15mm
18mm
22mm
26mm
30mm
35mm
42mm
48mm
55mm
62mm
70mm
78mm
85mm
95mm
105mm
(12/07)
F
DIA

(.1772 = 4.50mm)
SF-20-16-.1250 REAMER Reamer tolerance on ID
SF-20-16-.1250 NCB
SFC-20-16-.1250
Carbide bushing
SFM-8-16-4.50
METRIC
BODY
OD
ORDERING EXAMPLES:
LS-0
TW-2
LS-1
TW-2
TW-2
LS-1
TW-2
TW-2
LS-1
TW-7
15mm
4.5mm 65
6mm 3mm
18mm
6mm
65
22mm
7.5mm 60
26mm 8mm 4mm 9.5mm 50
30mm
11.5mm 50
34mm
13mm 35
39mm
15.5mm 35
46mm 10mm 5.5mm 19mm 30
52mm
22mm 30
59mm
25.5mm 30
66mm
28.5mm 30
74mm
32.5mm 25
82mm
36.5mm 25
90mm
40.5mm 25
12mm 7mm
100mm
45.5mm 25
110mm
50.5mm 20
120mm
55.5mm 20
130mm
60.5mm 20
R
11.5mm
13mm
16mm
18mm
20mm
23.5mm
26mm
29.5mm
32.5mm
36mm
41mm
45mm
49mm
53mm
58mm
63mm
68mm
73mm
From #80 to 1/4"
+.0001/+.0004
LOCK
SCREW
Over 1/4 to 3/4"
+.0001/+.0005
LSM-1
LSM-2
Over 3/4 to 1-1/2"
+.0002/+.0006
LSM-3
LSM-4
Over 1-1/2 to 2-3/4"
+.0003/+.0007
From .35 to 3mm

+.002/+.008mm
Over 3 to 6mm
+.004/+.012mm
Over 6 to 10mm
+.005/+.014mm
Over 10 to 18mm
+.006/+.017mm
Over 18 to 30mm
+.007/+.020mm
Over 30 to 50mm
+.009/+.025mm
Over 50 to 80mm
+.010/+.029mm
Over 80 to 120mm +.012/+.034mm
(G6 tolerance)
LSM-5
LSM-6
LSM-7
LSM-8
From #60 to 1/4"
+.0005/+.0008
Over 1/4 to 1"
+.0006/+.0010
Over 1 to 1-1/2"
+.0008/+.0012
From 1 to 3mm
+.006/+.012mm
Over 3 to 6mm
+.010/+.018mm
Over 6 to 10mm
+.013/+.022mm
Over 10 to 18mm
+.016/+.027mm
Over 18 to 30mm
+.020/+.033mm
(F6 tolerance)
21BU
SF
ID
RANGE
OD
.0135-.0291
#80-#70
.35-.70mm
3/16
.1875-.1873
.0635-.0980
#52-#40
1.65-2.50mm
.0995-.1405
1/4
#39-#28
.2500-.2498
2.55-3.50mm
SF-12-4
SF-12-5
SF-12-6
SF-12-8
SF-12-10
SF-12-12
SF-12-4
SF-12-5
SF-12-6
SF-12-8
SF-12-10
SF-12-12
SF-12-4
SF-12-5
SF-12-6
SF-12-8
SF-12-10
SF-12-12
SF-12-4
SF-12-5
SF-12-6
SF-12-8
SF-12-10
SF-12-12
SF-16-4
SF-16-5
SF-16-6
SF-16-8
SF-16-10
SF-16-12
ID
RANGE
PRICE LOCK
ANSI
LENGTH PART NO.
SCREW
1-5
OD
.0135-.0291
#80-#70
.35-.70mm
.0292-.0519
#69-3/64
.75-1.30mm
LS-0
.0520-.0634
#55-1/16
1.35-1.60mm
.0635-.0934
5/16
#52-#43
.3125-.3123
1.65-2.35mm
.0935-.1249
#42-#31
2.40-3.15mm
TW-2
.1250-.1935
1/8-#10
3.20-4.90mm
.1935-.2280
3/8
#10-#1
.3750-.3748
4.90-5.80mm
Why settle
for the rest
when
you can
have the best?
.2340-.2900
7/16
A-L
.4375-.4373
5.90-7.40mm
*1/4
*5/16
*3/8
*1/2
*3/4
*5/16
*3/8
*1/2
*3/4
*5/16
*3/8
*1/2
*3/4
5/16
*3/8
*1/2
*3/4
*1
5/16
3/8
*1/2
*3/4
*1
*1-3/8
5/16
3/8
1/2
5/8
*3/4
*1
*1-3/8
1/4
5/16
3/8
1/2
5/8
3/4
*1
1/4
5/16
3/8
1/2
5/8
3/4
*1
SF-20-4
SF-20-5
SF-20-6
SF-20-8
SF-20-12
SF-20-5
SF-20-6
SF-20-8
SF-20-12
SF-20-5
SF-20-6
SF-20-8
SF-20-12
SF-20-5
SF-20-6
SF-20-8
SF-20-12
SF-20-16
SF-20-5
SF-20-6
SF-20-8
SF-20-12
SF-20-16
SF-20-22
SF-20-5
SF-20-6
SF-20-8
SF-20-10
SF-20-12
SF-20-16
SF-20-22
SF-24-4
SF-24-5
SF-24-6
SF-24-8
SF-24-10
SF-24-12
SF-24-16
SF-28-4
SF-28-5
SF-28-6
SF-28-8
SF-28-10
SF-28-12
SF-28-16
.0520-.0634
#55-1/16
1.30-1.60mm
*1/4
*5/16
*3/8
*1/2
*5/8
*3/4
1/4
*5/16
*3/8
*1/2
*5/8
*3/4
1/4
*5/16
*3/8
*1/2
*5/8
*3/4
1/4
*5/16
*3/8
*1/2
*5/8
*3/4
1/4
5/16
*3/8
*1/2
*5/8
*3/4
.0292-.0519
#69-3/64
.75-1.25mm
PRICE LOCK
ANSI
LENGTH PART NO.
SCREW
1-5
LS-1
RC-01
RK-01
RK-10
TW-2
TW-2

QUANTITY DISCOUNTS
Quantity
Discount %
Multiplier
22BU
1
-5
Net
1.00
6
-11
18%
.82
12
-23
29%
.71
24
-49
34%
.66
50
-99
42%
.58
100
-199
48%
.52
200
-499
50%
.50
500
Up
52%
.48
(12/07)
ID
RANGE
OD
ANSI
PRICE LOCK
LENGTH PART NO. 1-5 SCREW
LS-1
RC-01
RK-01
RK-10
TW-2
ANSI
PRICE LOCK
LENGTH PART NO.
1-5 SCREW
OD
3/4
1
1-3/8
.7188-1.0625
1-3/8
1-1/2
23/321-1/16 1.3750-1.3747 1-3/4
18.50-27.00mm
2-1/8
2-1/2
3
3/4
1
1-3/8
.9688-1.4062
1-3/4
1-1/2
31/321-13/32 1.7500-1.7497
1-3/4
25.00-35.00mm
2-1/8
2-1/2
3
3/4
1
1-3/8
1.3438-1.8750
2-1/4
1-1/2
1-11/321-7/8
2.2500-2.2496 1-3/4
35.00-47.00mm
2-1/8
2-1/2
3
SF-88-12
SF-88-16
SF-88-22
SF-88-24
SF-88-28
SF-88-34
SF-88-40
SF-88-48
SF-112-12
SF-112-16
SF-112-22
SF-112-24
SF-112-28
SF-112-34
SF-112-40
SF-112-48
SF-144-12
SF-144-16
SF-144-22
SF-144-24
SF-144-28
SF-144-34
SF-144-40
SF-144-48
SF-32-5
SF-32-6
SF-32-8
SF-32-12
SF-32-16
SF-32-22
SF-32-24
SF-32-28
SF-32-5
SF-32-6
SF-32-8
SF-32-12
SF-32-16
SF-32-22
SF-32-24
SF-32-28
SF-32-34
SF-36-4
SF-36-5
SF-36-6
SF-36-8
SF-36-10
SF-36-12
SF-36-16
SF-40-6
SF-40-8
SF-40-10
SF-40-12
SF-40-16
SF-40-20
SF-48-6
SF-48-8
SF-48-12
SF-48-16
SF-48-22
SF-48-24
SF-48-28
SF-48-34
SF-48-40
SF-48-48
SF-56-8
SF-56-10
SF-56-12
SF-56-16
SF-56-20
SF-56-24
SF-64-8
SF-64-12
SF-64-16
SF-64-22
SF-64-24
SF-64-28
SF-64-34
SF-64-40
SF-64-48
5/16
3/8
1/2
.1405-.1889
*3/4
#28-3/16
*1
3.60-4.75mm
*1-3/8
*1-1/2
*1-3/4
1/2
.5000-.4998 5/16
3/8
1/2
.1890-.3438
3/4
#12-11/32
*1
*1-3/8
4.80-8.70mm
*1-1/2
*1-3/4
*2-1/8
1/4
5/16
.2950-.3438
3/8
9/16
M-11/32
1/2
7.50-8.80mm .5625-.5623 5/8
3/4
1
3/8
1/2
.3480-.4375
5/8
5/8
S-7/16
.6250-.6248 3/4
8.90-11.00mm
1
1-1/4
3/8
1/2
3/4
1
.2812-.5625
1-3/8
3/4
9/32-9/16
.7500-.7498 1-1/2
7.20-14.00mm
1-3/4
2-1/8
*2-1/2
*3
1/2
5/8
.5469-.6562
7/8
3/4
35/64-21/32
1
13.50-16.50mm .8750-.8748
1-1/4
1-1/2
1/2
3/4
1
.4688-.7812
1-3/8
1
15/32-25/32 1.0000-.9998 1-1/2
12.00-19.50mm
1-3/4
2-1/8
2-1/2
3
ID
RANGE
SF
LS-2
RC-02
RK-02
RK-12
LS-3
RC-03
RK-03
RK-14
LS-3
RC-03
RK-03
RK-14

catalog.
TW-2
QUANTITY DISCOUNTS
Quantity
Discount %
Multiplier
1
-5
Net
1.00
6
-11
18%
.82
12
-23
29%
.71
24
-49
34%
.66
50
-99
42%
.58
100
-199
48%
.52
200
-499
50%
.50
500
Up
52%
.48
LS-1
RC-01
RK-01
RK-11
TW-7
LS-2
RC-02
RK-02
RK-12
The biggest
disappointments
come to those
who get whats
coming to them.

(8/03)
23BU
CARBIDE
SFC
SFC
SC
ID
RANGE
.0520-.0934
#55-#43
1.35-2.35mm
.0935-.1562
#42-5/32
2.40-3.90mm
OD
5/16
.3125-.3123
.1406-.1889
9/64-3/16
3.60-4.75mm
1/2
.5000-.4998
.1890-.3438
#12-11/32
4.80-8.70mm
.2812-.5312
9/32-17/32
7.20-13.00mm
3/4
.7500-.7498
.4688-.7812
15/32-25/32
12.00-19.50mm
1
1.0000-.9998
.7188-1.0312
1-3/8
23/32 - 1-1/32 1.3750-1.3747
18.50-27.00mm
.9688-1.4062
31/32 - 1-13/32
25.00-35.00mm
1-3/4
1.7500-1.7497
1.3438-1.7812
2-1/4
1-11/32 - 1-25/32
2.2500-2.2496
35.00-45.00mm
LENGTH
ANSI
PART NO.
5/16
1/2
3/4
1
5/16
1/2
3/4
1
5/16
1/2
3/4
1
1-3/8
5/16
1/2
3/4
1
1-3/8
1/2
3/4
1
1-3/8
1/2
3/4
1
1-3/8
1-3/4
3/4
1
1-3/8
1-3/4
2-1/8
2-1/2
1
1-3/8
1-3/4
2-1/8
2-1/2
3
1
1-3/8
1-3/4
2-1/8
2-1/2
3
SFC-20-5
SFC-20-8
SFC-20-12
SFC-20-16
SFC-20-5
SFC-20-8
SFC-20-12
SFC-20-16
SFC-32-5
SFC-32-8
SFC-32-12
SFC-32-16
SFC-32-22
SFC-32-5
SFC-32-8
SFC-32-12
SFC-32-16
SFC-32-22
SFC-48-8
SFC-48-12
SFC-48-16
SFC-48-22
SFC-64-8
SFC-64-12
SFC-64-16
SFC-64-22
SFC-64-28
SFC-88-12
SFC-88-16
SFC-88-22
SFC-88-28
SFC-88-34
SFC-88-40
SFC-112-16
SFC-112-22
SFC-112-28
SFC-112-34
SFC-112-40
SFC-112-48
SFC-144-16
SFC-144-22
SFC-144-28
SFC-144-34
SFC-144-40
SFC-144-48
SLIP RENEWABLE
PRICE
1-5
Contact
Factory
Contact
Factory
LOCK
SCREW
LS-1
RC-01
RK-01
RK-10
Contact
Factory
LS-1
RC-01
RK-01
RK-10
Contact
Factory
Contact
Factory
LS-1
RC-01
RK-01
RK-10
Contact
Factory
LS-2
RC-02
RK-02
RK-12
Contact
Factory
LS-2
RC-02
RK-02
RK-12
Contact
Factory
LS-3
RC-03
RK-03
RK-14
Contact
Factory
LS-3
RC-03
RK-03
RK-14
ANSI
PART NO.
SC-20-5
SC-20-8
SC-20-12
SC-20-16
SC-20-5
SC-20-8
SC-20-12
SC-20-16
SC-32-5
SC-32-8
SC-32-12
SC-32-16
SC-32-22
SC-32-5
SC-32-8
SC-32-12
SC-32-16
SC-32-22
SC-48-8
SC-48-12
SC-48-16
SC-48-22
SC-64-8
SC-64-12
SC-64-16
SC-64-22
SC-64-28
SC-88-12
SC-88-16
SC-88-22
SC-88-28
SC-88-34
SC-88-40
SC-112-16
SC-112-22
SC-112-28
SC-112-34
SC-112-40
SC-112-48
SC-144-16
SC-144-22
SC-144-28
SC-144-34
SC-144-40
SC-144-48
PRICE
1-5
Contact
Factory
Contact
Factory
Contact
Factory
Contact
Factory
Contact
Factory
Contact
Factory
Contact
Factory
Contact
Factory
Contact
Factory
FC
FIXED RENEWABLE
ANSI
PART NO.
FC-20-5
FC-20-8
FC-20-12
FC-20-16
FC-20-5
FC-20-8
FC-20-12
FC-20-16
FC-32-5
FC-32-8
FC-32-12
FC-32-16
FC-32-22
FC-32-5
FC-32-8
FC-32-12
FC-32-16
FC-32-22
FC-48-8
FC-48-12
FC-48-16
FC-48-22
FC-64-8
FC-64-12
FC-64-16
FC-64-22
FC-64-28
FC-88-12
FC-88-16
FC-88-22
FC-88-28
FC-88-34
FC-88-40
FC-112-16
FC-112-22
FC-112-28
FC-112-34
FC-112-40
FC-112-48
FC-144-16
FC-144-22
FC-144-28
FC-144-34
FC-144-40
FC-144-48
PRICE
1-5
Contact
Factory
Contact
Factory
Contact
Factory
Contact
Factory
Contact
Factory
Contact
Factory
Contact
Factory
Contact
Factory
Contact
Factory
Note: Due to manufacturing requirements, head dimensions of some carbide bushings may differ slightly from ANSI standards. Most carbide
bushings have steel heads.
24BU
(8/03)
METRIC
ID RANGE
(G6)
OD
(h5)
1.01-1.80mm
8mm
8.000-7.994mm
1.81-4.00mm
4.01-6.00mm
10mm
10.000-9.994mm
6.01-8.00mm
12mm
12.000-11.992mm
15mm
8.01-10.00mm
15.000-14.992mm
18mm
18.000-17.992mm
12.01-15.00mm
22mm
22.000-21.991mm
15.01-18.00mm
26mm
26.000-25.991mm
30mm
18.01-22.00mm
30.000-29.991mm
35mm
22.01-26.00mm 35.000-34.989mm
26.01-30.00mm
42mm
42.000-41.989mm
48mm
30.01-35.00mm 48.000-47.989mm
55mm
35.01-42.00mm
55.000-54.987mm
42.01-48.00mm
62mm
62.000-61.987mm
*10mm
*16mm
10mm
16mm
10mm
16mm
12mm
20mm
25mm
12mm
20mm
25mm
16mm
28mm
36mm
16mm
28mm
36mm
20mm
36mm
45mm
20mm
36mm
45mm
25mm
45mm
56mm
25mm
45mm
56mm
30mm
56mm
67mm
30mm
56mm
67mm
30mm
56mm
67mm
35mm
67mm
78mm
SFM-8-10
SFM-8-16
SFM-8-10
SFM-8-16
SFM-8-10
SFM-8-16
SFM-10-12
SFM-10-20
SFM-10-25
SFM-12-12
SFM-12-20
SFM-12-25
SFM-15-16
SFM-15-28
SFM-15-36
SFM-18-16
SFM-18-28
SFM-18-36
SFM-22-20
SFM-22-36
SFM-22-45
SFM-26-20
SFM-26-36
SFM-26-45
SFM-30-25
SFM-30-45
SFM-30-56
SFM-35-25
SFM-35-45
SFM-35-56
SFM-42-30
SFM-42-56
SFM-42-67
SFM-48-30
SFM-48-56
SFM-48-67
SFM-55-30
SFM-55-56
SFM-55-67
SFM-62-35
SFM-62-67
SFM-62-78
ID RANGE
(G6)
OD
(h5)
LENGTH
ANSI
PRICE LOCK
PART NO. 1-5 SCREW
35mm SFM-70-35
70mm
48.01-55.00mm 70.000-69.987mm 67mm SFM-70-67
LSM-1
LSM-2
RCM-1
RCM-2
LSM-3
LSM-4
RCM-3
RCM-4
10.01-12.00mm
ANSI
PRICE LOCK
PART NO. 1-5 SCREW
78mm
55.01-62.00mm 78.000-77.987mm
62.01-70.00mm
85mm
85.000-84.985mm
70.01-78.00mm
95mm
95.000-94.985mm
105mm
78.01-85.00mm 105.000-104.985mm
78mm
40mm
78mm
105mm
40mm
78mm
105mm
45mm
89mm
112mm
45mm
89mm
112mm
SFM-70-78
SFM-78-40
SFM-78-78
SFM-78-105
SFM-85-40
SFM-85-78
SFM-85-105
SFM-95-45
SFM-95-89
SFM-95-112
SFM-105-45
SFM-105-89
SFM-105-112
.35-1.00mm
LENGTH
SFM
LSM-7
LSM-8
RCM-7
RCM-8

LSM-5
LSM-6
RCM-5
RCM-6
LSM-7
LSM-8
RCM-7
RCM-8
He that wont
be counselled
cant be helped.
-Ben Franklin
QUANTITY DISCOUNTS
Quantity
Discount %
Multiplier
(7/01)
1
-5
Net
1.00
6
-11
18%
.82
12
-23
29%
.71
24
-49
34%
.66
50
-99
42%
.58
100
-199
48%
.52
200
-499
50%
.50
500
Up
52%
.48
25BU
FM FLAT MILLED RENEWABLE

From #80 to 1/4"
+.0001/+.0004
Over 1/4 to 3/4"
+.0001/+.0005
Over 3/4 to1-1/2"
+.0002/+.0006
Over 1-1/2 to 2-3/4" +.0003/+.0007
From .35 to 3mm +.002/+.008mm

Over 3 to 6mm
+.004/+.012mm
Over 6 to 10mm +.005/+.014mm
Over 10 to 18mm +.006/+.017mm
Over 18 to 30mm +.007/+.020mm
Over 30 to 50mm +.009/+.025mm
(G6 tolerance)
From #60 to 1/4"
+.0005/+.0008
Over 1/4 to 1"
+.0006/+.0010
Over 1" to 1-1/2"
+.0008/+.0012
ID
RANGE
BODY
OD
5/16
35/64
11/64 11/64
5/8
11/16
1/2
1/2
51/64 1/4 1/8 19/64 17/64
3/4
25/32
5/8
3/4
1-3/64
27/64 25/64
7/8
57/64
3/4
1-27/64
19/32 1/2
1-7/64 1-9/64 59/64
3/8 3/16
25/32 11/16 1-19/64 1-21/64 1-7/64
1-3/8 1-51/64
1-3/4 2-19/64
3/8 3/16
2-1/4 2-51/64
FLAT LOCK
CLAMP SCREW
FC-01
LS-1
FC-10
FC-02
LS-2
FC-12
7/8 1-41/64 1-33/64 1-25/64
FC-03
FC-14 LS-3
1-1/4 1-1/8 1-57/64 1-49/64 1-41/64 FC-15
LENGTH
.0135-.0291
#80-#70
.35-.70mm
.0292-.0519
#69-3/64
.75-1.30mm
.0520-.0634
#55-1/16
1.35-1.60mm
.0635-.0934
5/16
#52-#43
.3125-.3123
1.65-2.35mm
APPLICATIONS:
Replaceable bushing used for extra resistance to rotational forces
under harsh conditions. This bushing, generally used with a liner, has a
milled locking flat to allow fastening securely with a flat clamp. FM bushings also have a standard recess on the other side to allow using a
lockscrew instead.
.1250-.1935
1/8-#10
3.20-4.90mm
ORDERING EXAMPLES:
FM-20-16-.1250
FM-20-16-.1772
FM-20-16-.1250 REAMER
FM-20-16-.1250 NCB
FMC-20-16-.1250
Standard USA Bushing, inch ID

Standard USA Bushing, mm ID
(.1772 = 4.50mm)
Reamer Tolerance on ID
Carbide Bushing
Prices shown here apply to standard bushings only, for a standard drill
size within the stated ID range. See back cover for decimal equivalents.
To price non-standard sizes, including all reamer and tap-guide bushings, see page 7.
26BU
.0935-.1249
#42-#31
2.40-3.15mm
*1/4
*5/16
*3/8
*1/2
*3/4
*5/16
*3/8
*1/2
*3/4
*5/16
*3/8
*1/2
*3/4
5/16
*3/8
*1/2
*3/4
*1
5/16
3/8
*1/2
*3/4
*1
*1-3/8
5/16
3/8
1/2
5/8
*3/4
*1
*1-3/8
ANSI
PRICE
CLAMP
PART NO.
1-5
FM-20-4
FM-20-5
FM-20-6
FM-20-8
FM-20-12
FM-20-5
FM-20-6
FM-20-8
FM-20-12
FM-20-5
FM-20-6
FM-20-8
FM-20-12
FM-20-5
FM-20-6
FM-20-8
FM-20-12
FM-20-16
FM-20-5
FM-20-6
FM-20-8
FM-20-12
FM-20-16
FM-20-22
FM-20-5
FM-20-6
FM-20-8
FM-20-10
FM-20-12
FM-20-16
FM-20-22
OD
From 1 to 3mm +.006/+.012mm

Over 3 to 6mm
+.010/+.018mm
Over 6 to 10mm +.013/+.022mm
Over 10 to 18mm +.016/+.027mm
Over 18 to 30mm +.020/+.033mm
(F6 tolerance)
FC-01
FC-10
LS-1
RC-01
RK-01
RK-10

QUANTITY DISCOUNTS
Quantity
Discount %
Multiplier
1
-5
Net
1.00
6
-11
18%
.82
12
-23
29%
.71
24
-49
34%
.66
50
-99
42%
.58
100
-199
48%
.52
200
-499
50%
.50
500
Up
52%
.48
(12/07)
FLAT MILLED RENEWABLE

ID
RANGE
LENGTH
OD
1/2
.5000-.4998
.2812-.5625
3/4
9/32-9/16
.7500-.7498
7.20-14.00mm
.4688-.7812
1
15/32-25/32
1.0000-.9998
12.00-19.50mm
.7188-1.0625
1-3/8
23/32 1-1/16 1.3750-1.3747
18.50-27.00mm
OD
.9688-1.4062
1-3/4
31/32 1-13/32
1.7500-1.7497
25.00-35.00mm
FC-01
FC-10
LS-1
RC-01
RK-01
RK-10
.1890-.3438
#12-11/32
4.80-8.70mm
FM-32-5
FM-32-6
FM-32-8
FM-32-12
FM-32-16
FM-32-22
FM-32-24
FM-32-28
FM-32-5
FM-32-6
FM-32-8
FM-32-12
FM-32-16
FM-32-22
FM-32-24
FM-32-28
FM-32-34
FM-48-6
FM-48-8
FM-48-12
FM-48-16
FM-48-22
FM-48-24
FM-48-28
FM-48-34
FM-48-40
FM-48-48
FM-64-8
FM-64-12
FM-64-16
FM-64-22
FM-64-24
FM-64-28
FM-64-34
FM-64-40
FM-64-48
FM-88-12
FM-88-16
FM-88-22
FM-88-24
FM-88-28
FM-88-34
FM-88-40
FM-88-48
ID
RANGE
1.3438-1.8750
2-1/4
1-11/32 1-7/8
2.2500-2.2496
35.00-47.00mm
LENGTH
3/4
1
1-3/8
1-1/2
1-3/4
2-1/8
2-1/2
3
3/4
1
1-3/8
1-1/2
1-3/4
2-1/8
2-1/2
3
ANSI
PRICE
CLAMP
PART NO.
1-5
FM-112-12
FM-112-16
FM-112-22
FM-112-24
FM-112-28
FM-112-34
FM-112-40
FM-112-48
FM-144-12
FM-144-16
FM-144-22
FM-144-24
FM-144-28
FM-144-34
FM-144-40
FM-144-48
.1405-.1889
#28-3/16
3.60-4.75mm
5/16
3/8
1/2
*3/4
*1
*1-3/8
*1-1/2
*1-3/4
5/16
3/8
1/2
3/4
*1
*1-3/8
*1-1/2
*1-3/4
*2-1/8
3/8
1/2
3/4
1
1-3/8
1-1/2
1-3/4
2-1/8
*2-1/2
*3
1/2
3/4
1
1-3/8
1-1/2
1-3/4
2-1/8
2-1/2
3
3/4
1
1-3/8
1-1/2
1-3/4
2-1/8
2-1/2
3
ANSI
PRICE
CLAMP
PART NO.
1-5
FM
FC-03
FC-14
FC-15
LS-3
RC-03
RK-03
RK-14
FC-03
FC-14
FC-15
LS-3
RC-03
RK-03
RK-14

catalog.
FC-01
FC-11
LS-1
RC-01
RK-01
RK-11
FC-02
FC-12
LS-2
RC-02
RK-02
RK-12
FC-02
FC-12
LS-2
RC-02
RK-02
RK-12
* Counter-bored, leaving correct drill-bearing length and clearance

Cooperation
is doing
with a smile
what you
have to do
anyway.
QUANTITY DISCOUNTS
Quantity
Discount %
Multiplier
(12/07)
1
-5
Net
1.00
6
-11
18%
.82
12
-23
29%
.71
24
-49
34%
.66
50
-99
42%
.58
100
-199
48%
.52
200
-499
50%
.50
500
Up
52%
.48
27BU
LINER
LENGTH
ID
OD
OD
ANSI
PART NO.
1/4
5/16
3/8
1/2
5/8
3/4
1
1-3/8
1/4
5/16
3/8
1/2
5/8
3/4
1
1/4
5/16
3/8
1/2
5/8
3/4
1
1/4
5/16
3/8
1/2
5/8
3/4
1
5/16
3/8
1/2
3/4
1
1-3/8
1-1/2
1-3/4
2-1/8
5/16
3/8
1/2
5/8
3/4
1
1-1/4
5/16
3/8
1/2
5/8
3/4
1
1-1/4
L-32-4
L-32-5
L-32-6
L-32-8
L-32-10
L-32-12
L-32-16
L-32-22
L-36-4
L-36-5
L-36-6
L-36-8
L-36-10
L-36-12
L-36-16
L-40-4-24
L-40-5-24
L-40-6-24
L-40-8-24
L-40-10-24
L-40-12-24
L-40-16-24
L-40-4-28
L-40-5-28
L-40-6-28
L-40-8-28
L-40-10-28
L-40-12-28
L-40-16-28
L-48-5
L-48-6
L-48-8
L-48-12
L-48-16
L-48-22
L-48-24
L-48-28
L-48-34
L-56-5-36
L-56-6-36
L-56-8-36
L-56-10-36
L-56-12-36
L-56-16-36
L-56-20-36
L-56-5-40
L-56-6-40
L-56-8-40
L-56-10-40
L-56-12-40
L-56-16-40
L-56-20-40
1/2
.5017-.5014
(.520-.515 UNG)
ID
5/16
APPLICATIONS:
9/16
.5642-.5639
(.582-.577 UNG)
Liners are permanent bushings used to hold renewable drill

bushings. The liners ID has a precise sliding fit with the
renewable bushings OD. The hardened liner accurately locates the renewable bushing and protects the jig plate from
wear caused by frequent bushing replacement. Note: Metric
liner bushings are the same as metric press-fit bushings.
3/8
5/8
.6267-.6264
(.645-.640 UNG)
ORDERING EXAMPLES:
L-32-16
L-32-16U
L-40-16-24
PM-18-25-12.00
Standard USA liner bushing

Unground OD
Standard USA liner bushing with a
choice of ID in that OD size
Standard metric liner bushing (same as
metric press-fit type)
7/16

ground or unground OD, for a standard ID size.
1/2
STANDARD LINER ID TOLERANCES:

3/16 to 3/8"
7/16 to 5/8"
3/4"
7/8 to 1"
1-3/8"
1-3/4"
2-1/4"
+.0001/+.0004
+.0002/+.0005
+.0003/+.0006
+.0004/+.0007
+.0006/+.0010
+.0008/+.0012
+.0010/+.0015
8 to 10mm
+.005/+.014mm
12 to 18mm
+.006/+.017mm
22 to 30mm
+.007/+.020mm
35 to 48mm
+.009/+.025mm
55 to 78mm
+.010/+.029mm
85 to 105mm
+.012/+.034mm
(G6 tolerance)
OD
3/16
5/16
.3141-.3138
(.327-.322 UNG)
1/4
7/16
.4392-.4389
(.453-.448 UNG)
28BU
LENGTH
1/4
5/16
3/8
1/2
5/8
3/4
1/4
5/16
3/8
1/2
5/8
3/4
9/16
7/8
.8768-.8765
(.895-.890 UNG)
PRICE
ANSI
1-5
PART NO.
L-20-4
L-20-5
L-20-6
L-20-8
L-20-10
L-20-12
L-28-4
L-28-5
L-28-6
L-28-8
L-28-10
L-28-12
Please see our web

ID
3/4
.7518-.7515
(.770-.765 UNG)
5/8
PRICE
1-5
LENGTH
QUANTITY DISCOUNTS
Quantity
Discount %
Multiplier
1
-5
Net
1.00
6
-11
18%
.82
12
-23
29%
.71
24
-49
34%
.66
50
-99
42%
.58
100
-199
48%
.52
200
-499
50%
.50
500
Up
52%
.48
(7/01)
LINER
ID
3/4
OD
ANSI
PART NO.
1/2
3/4
1
1-3/8
1-1/2
1-3/4
2-1/8
2-1/2
3
1/2
5/8
3/4
1
1-1/4
1-1/2
1/2
3/4
1
1-3/8
1-1/2
1-3/4
2-1/8
2-1/2
3
3/4
1
1-3/8
1-1/2
1-3/4
2-1/8
2-1/2
3
3/4
1
1-3/8
1-1/2
1-3/4
2-1/8
2-1/2
3
3/4
1
1-3/8
1-1/2
1-3/4
2-1/8
2-1/2
3
L-64-8
L-64-12
L-64-16
L-64-22
L-64-24
L-64-28
L-64-34
L-64-40
L-64-48
L-80-8
L-80-10
L-80-12
L-80-16
L-80-20
L-80-24
L-88-8
L-88-12
L-88-16
L-88-22
L-88-24
L-88-28
L-88-34
L-88-40
L-88-48
L-112-12
L-112-16
L-112-22
L-112-24
L-112-28
L-112-34
L-112-40
L-112-48
L-144-12
L-144-16
L-144-22
L-144-24
L-144-28
L-144-34
L-144-40
L-144-48
L-176-12
L-176-16
L-176-22
L-176-24
L-176-28
L-176-34
L-176-40
L-176-48
1
1.0018-1.0015
(1.020-1.015 UNG)
7/8
1-1/4
1.2520-1.2517
(1.270-1.265 UNG)
1-3/8
1.3772-1.3768
(1.395-1.390 UNG)
1-3/8
1-3/4
1.7523-1.7519
(1.770-1.765 UNG)
1-3/4
2-1/4
2.2525-2.2521
(2.270-2.265 UNG)
2-1/4
2-3/4
2.7526-2.7522
(2.770-2.765 UNG)
PRICE
1-5
Alignment Pins
Offer Strength and Precision
Our wide variety of precision alignment pins
includes ball-lock pins, detent pins, expanding
pins and lifting pins. Choose just the right pin
for every job. Send for a free catalog, or view
our web site, www.carrlane.com. We also have
a wide assortment of tooling components,
clamps, modular fixturing and much more.
LENGTH
L Pin
Shoulder Pin
T Pin
Clamping Pin
Jig Pin
Ball Lock Pin
Marine Pin
Lifting Pin
Locating Pin
Detent Pin
Locking Pin
Expanding Pin

catalog.
QUANTITY DISCOUNTS
Quantity
Discount %
Multiplier
(6/05)
1
-5
Net
1.00
6
-11
18%
.82
12
-23
29%
.71
24
-49
34%
.66
50
-99
42%
.58
100
-199
48%
.52
200
-499
50%
.50
500
Up
52%
.48
29BU
LINER
METRIC
PM
OD
(s6)
ID
(G6)
LENGTH
10mm
12mm
15mm
18mm
26mm
30mm
PM-85-35-70.00
PM-12-16-8.00
PM-85-67-70.00
70mm
PM-85-78-70.00
PM-15-20-10.00
40mm
PM-95-40-78.00
25mm
PM-15-25-10.00
PM-95-78-78.00
12mm
95mm
78mm
95.093-95.071mm
PM-18-12-12.00
18mm
20mm
18.039-18.028mm
PM-18-20-12.00
40mm
PM-105-40-85.00
25mm
PM-18-25-12.00
PM-105-78-85.00
16mm
105mm
78mm
105.101-105.079mm
PM-22-16-15.00
22mm
28mm
22.048-22.035mm
PM-22-28-15.00
36mm
PM-22-36-15.00
16mm
PM-26-16-18.00
26mm
28mm
26.048-26.035mm
PM-26-28-18.00
36mm
PM-26-36-18.00
20mm
PM-30-20-22.00
30mm
36mm
30.048-30.035mm
PM-30-36-22.00
45mm
PM-30-45-22.00
20mm
PM-35-20-26.00
35mm
36mm
35.059-35.043mm
PM-35-36-26.00
45mm
PM-35-45-26.00
25mm
PM-42-25-30.00
42mm
45mm
42.059-42.043mm
PM-42-45-30.00
56mm
PM-42-56-30.00
25mm
PM-48-25-35.00
PM-48-45-35.00
56mm
PM-48-56-35.00
30mm
PM-55-30-42.00
PM-55-67-42.00
30mm
PM-62-30-48.00
105mm PM-95-105-78.00
85mm
105mm PM-105-105-85.00
95mm
PM-62-67-48.00
30mm
PM-70-30-55.00
PM-70-67-55.00
35mm
PM-78-35-62.00
PM-115-45-95.00
PM-115-89-95.00
105mm
45mm
PM-125-45-105.00
125mm
89mm
125.117-125.092mm
PM-125-89-105.00
PRICE
1-5
112mm PM-125-112-105.00
Note: Metric liner bushings are the same as metric press-fit bushings.
Be the job
Great or small
Do it right
PM-70-56-55.00
67mm
45mm
115mm
89mm
115.101-115.079mm
112mm PM-115-112-95.00
PM-62-56-48.00
67mm
78mm
78mm
PM-55-56-42.00
67mm
78mm
78.078-78.059mm 67mm
62mm
35mm
85mm
67mm
85.093-85.071mm
15mm
20mm
15.039-15.028mm
70mm
70.078-70.059mm 56mm
55mm
ANSI
PART NO.
78mm
62mm
62.072-62.053mm 56mm
48mm
LENGTH
PM-15-12-10.00
55mm
56mm
55.072-55.053mm
42mm
OD
(s6)
12mm
48mm
45mm
48.059-48.043mm
35mm
ID
(G6)
PM-12-10-8.00
22mm
PRICE
1-5
10mm
12mm
12.039-12.028mm 16mm
8mm
ANSI
PART NO.
PM-78-67-62.00
Or not at all.
PM-78-78-62.00
QUANTITY DISCOUNTS
Quantity
Discount %
Multiplier
30BU
1
-5
Net
1.00
6
-11
18%
.82
12
-23
29%
.71
24
-49
34%
.66
50
-99
42%
.58
100
-199
48%
.52
200
-499
50%
.50
500
Up
52%
.48
(7/01)
HL
HEAD LINER
F
LENGTH
OD
ID
OD
5/16
1/2
.5017-.5014
(.520-.515 UNG)
1/2
3/4
.7518-.7515
(.770-.765 UNG)
ANSI
PART NO.
5/16
3/8
1/2
3/4
1
1-3/8
5/16
3/8
1/2
3/4
1
1-3/8
1-1/2
1-3/4
2-1/8
1/2
3/4
1
1-3/8
1-1/2
1-3/4
2-1/8
2-1/2
3
1/2
3/4
1
1-3/8
1-1/2
1-3/4
2-1/8
2-1/2
3
3/4
1
1-3/8
1-1/2
1-3/4
2-1/8
2-1/2
3
3/4
1
1-3/8
1-1/2
1-3/4
2-1/8
2-1/2
3
3/4
1
1-3/8
1-1/2
1-3/4
2-1/8
2-1/2
3
HL-32-5
HL-32-6
HL-32-8
HL-32-12
HL-32-16
HL-32-22
HL-48-5
HL-48-6
HL-48-8
HL-48-12
HL-48-16
HL-48-22
HL-48-24
HL-48-28
HL-48-34
HL-64-8
HL-64-12
HL-64-16
HL-64-22
HL-64-24
HL-64-28
HL-64-34
HL-64-40
HL-64-48
HL-88-8
HL-88-12
HL-88-16
HL-88-22
HL-88-24
HL-88-28
HL-88-34
HL-88-40
HL-88-48
HL-112-12
HL-112-16
HL-112-22
HL-112-24
HL-112-28
HL-112-34
HL-112-40
HL-112-48
HL-144-12
HL-144-16
HL-144-22
HL-144-24
HL-144-28
HL-144-34
HL-144-40
HL-144-48
HL-176-12
HL-176-16
HL-176-22
HL-176-24
HL-176-28
HL-176-34
HL-176-40
HL-176-48
ID
USA
METRIC
BODY
OD
F
DIA
1/2
3/4
1
1-3/8
1-3/4
2-1/4
2-3/4
5/8
7/8
1-1/8
1-1/2
1-7/8
2-3/8
2-7/8
3/32
3/32
1/8
1/8
3/16
3/16
3/16
For dimensions of larger USA

sizes, see page 37 (Extended
Range).
BODY
OD
F
DIA
12mm
15mm
18mm
22mm
26mm
30mm
35mm
42mm
48mm
55mm
62mm
70mm
78mm
85mm
95mm
105mm
115mm
125mm
15mm
18mm
22mm
26mm
30mm
34mm
39mm
46mm
52mm
59mm
66mm
74mm
82mm
90mm
100mm
110mm
120mm
130mm
3mm
3mm
4mm
4mm
4mm
5mm
5mm
5mm
5mm
5mm
6mm
6mm
6mm
6mm
6mm
6mm
6mm
6mm
3/4
1
1.0018-1.0015
(1.020-1.015 UNG)
1-3/8
1.3772-1.3768
(1.395-1.390 UNG)
1-3/8
1-3/4
1.7523-1.7519
(1.770-1.765 UNG)
1-3/4
2-1/4
2.2525-2.2521
(2.270-2.265 UNG)
APPLICATIONS:
Similar to an L bushing, but with a head to resist heavy axial loads.
Head liners are permanent bushings used to hold renewable drill
bushings. The head liners ID has a precise sliding fit with the renewable bushings OD. The hardened head liner accurately locates the
renewable bushing and protects the jig plate from wear caused by
frequent bushing replacement. Note: The length listed for a head
liner refers to its overall length, not its length under the head. Metric
head-liner bushings are the same as metric head-press-fit bushings.
ORDERING EXAMPLES:
HL-32-16
HL-32-16U
HM-18-25-12.00

Unground OD
Standard metric liner bushing (same as
metric press-fit type)
Prices shown here apply to standard bushings only, either ground or

unground OD, for a standard ID size.
2-1/4
2-3/4
2.7526-2.7522
(2.770-2.765 UNG)

5/16"
1/2"
3/4"
1"
1-3/8"
1-3/4"
2-1/4"
(7/01)
+.0001/+.0004
+.0002/+.0005
+.0003/+.0006
+.0004/+.0007
+.0006/+.0010
+.0008/+.0012
+.0010/+.0015
8 to 10mm
+.005/+.014mm
12 to 18mm
+.006/+.017mm
22 to 30mm
+.007/+.020mm
35 to 48mm
+.009/+.025mm
55 to 78mm
+.010/+.029mm
85 to 105mm
+.012/+.034mm
(G6 tolerance)
PRICE
1-5
LENGTH
QUANTITY DISCOUNTS
Quantity
Discount %
Multiplier
1
-5
Net
1.00
6
-11
18%
.82
12
-23
29%
.71
24
-49
34%
.66
50
-99
42%
.58
100
-199
48%
.52
200
-499
50%
.50
500
Up
52%
.48
31BU
HEAD LINER
METRIC
HM
ID
(G6)
OD
(s6)
8mm
12mm
12.039-12.028mm
LENGTH
18mm
18.039-18.028mm
12mm
22mm
22.048-22.035mm
15mm
30mm
30.048-30.035mm
22mm
35mm
35.059-35.043mm
26mm
42mm
42.059-42.043mm
30mm
48mm
48.059-48.043mm
35mm
55mm
55.072-55.053mm
42mm
62mm
62.072-62.053mm
48mm
70mm
70.078-70.059mm
55mm
78mm
78.078-78.059mm
62mm
10mm
HM-12-10-8.00
16mm
HM-12-16-8.00
12mm
HM-15-12-10.00
20mm
HM-15-20-10.00
25mm
HM-15-25-10.00
12mm
HM-18-12-12.00
20mm
HM-18-20-12.00
25mm
HM-18-25-12.00
16mm
HM-22-16-15.00
28mm
HM-22-28-15.00
ID
(G6)
OD
(s6)
LENGTH
35mm
70mm
36mm
HM-22-36-15.00
16mm
HM-26-16-18.00
28mm
HM-26-28-18.00
36mm
HM-26-36-18.00
20mm
HM-30-20-22.00
36mm
HM-30-36-22.00
45mm
HM-30-45-22.00
20mm
HM-35-20-26.00
36mm
HM-35-36-26.00
45mm
HM-35-45-26.00
25mm
HM-42-25-30.00
45mm
HM-42-45-30.00
56mm
HM-42-56-30.00
25mm
HM-48-25-35.00
45mm
HM-48-45-35.00
56mm
HM-48-56-35.00
30mm
HM-55-30-42.00
56mm
HM-55-56-42.00
67mm
HM-55-67-42.00
30mm
HM-62-30-48.00
56mm
HM-62-56-48.00
67mm
HM-62-67-48.00
30mm
HM-70-30-55.00
56mm
HM-70-56-55.00
67mm
HM-70-67-55.00
35mm
HM-78-35-62.00
67mm
HM-78-67-62.00
78mm
HM-78-78-62.00
78mm
ANSI
PART NO.
PRICE
1-5
HM-85-35-70.00
85mm
67mm HM-85-67-70.00
85.093-85.071mm
78mm
HM-85-78-70.00
40mm
HM-95-40-78.00
95mm
78mm HM-95-78-78.00
95.093-95.071mm
105mm HM-95-105-78.00
40mm
HM-105-40-85.00
105mm
78mm HM-105-78-85.00
85mm
105.101-105.079mm
105mm HM-105-105-85.00
45mm
HM-115-45-95.00
115mm
89mm HM-115-89-95.00
95mm
115.101-115.079mm
112mm HM-115-112-95.00
45mm
26mm
26.048-26.035mm
18mm
PRICE
1-5
HM-125-45-105.00
125mm
89mm HM-125-89-105.00
105mm
125.117-125.092mm
15mm
15.039-15.028mm
10mm
ANSI
PART NO.
112mm HM-125-112-105.00
Note: Metric head-liner bushings are the same as metric headpress-fit bushings.
It is not
a tragedy to have
only one talent;
the tragedy
is in
not using it.
QUANTITY DISCOUNTS
Quantity
Discount %
Multiplier
32BU
1
-5
Net
1.00
6
-11
18%
.82
12
-23
29%
.71
24
-49
34%
.66
50
-99
42%
.58
100
-199
48%
.52
200
-499
50%
.50
500
Up
52%
.48
(7/01)
UL
UN-A-LOK LINER
USA
OD
3/16
.3141-.3138
(.327-.322 UNG)
5/16
.5017-.5014
(.520-.515 UNG)
1/2
.7518-.7515
(.770-.765 UNG)
3/4
1.0018-1.0015
(1.020-1.015 UNG)
1.3772-1.3768
(1.395-1.390 UNG)
5/16
1/2
USA
BODY
OD
5/16
1/2
3/4
1
1-3/8
METRIC
F
DIA
1/4
.365
3/8
9/16
1/2
13/16
21/32 1-1/16
7/8 1-7/16
3/32
3/32
3/32
1/8
1/8
BODY
OD
F
DIA
12mm 9.5mm 15mm

15mm 11mm 18mm
18mm 13mm 22mm
22mm 15.5mm 26mm
26mm 17.5mm 30mm
3mm
3mm
4mm
4mm
4mm
Similar to an HL head liner, but incorporating a special locking tab that

eliminates the need for a lockscrew. Un-A-Lok liners are permanent
bushings used to hold SF renewable drill bushings (on the slip side
only, not the fixed side). Although slightly more expensive than a
head liner plus a lockscrew, installation time is dramatically reduced.
Patent no. 3,015,242 and 3,099,079.
OD
(s6)
ID
(G6)
8mm
10mm
12mm
15mm
ORDERING EXAMPLES:
Unground OD
Standard metric liner bushing
1-3/8
MILLED
SLOT FOR
LOCK TAB
CLEARANCE
+.0001/+.0004
+.0002/+.0005
+.0003/+.0006
+.0004/+.0007
18mm
(7-04)
5/16
3/8
1/2
3/4
3/8
1/2
3/4
1/2
3/4
1
1/2
3/4
1
1/2
3/4
1
1-3/8
UL-20-5
UL-20-6
UL-20-8
UL-20-12
UL-32-6
UL-32-8
UL-32-12
UL-48-8
UL-48-12
UL-48-16
UL-64-8
UL-64-12
UL-64-16
UL-88-8
UL-88-12
UL-88-16
UL-88-22
LENGTH
PRICE
1-5
PART NO.
ULM-12-10-8.00
ULM-12-16-8.00
ULM-15-12-10.00
ULM-15-20-10.00
ULM-15-25-10.00
ULM-18-12-12.00
ULM-18-20-12.00
ULM-18-25-12.00
ULM-22-16-15.00
ULM-22-28-15.00
ULM-22-36-15.00
ULM-26-16-18.00
ULM-26-28-18.00
ULM-26-36-18.00
Contact
Factory
Contact
Factory
Contact
Factory
Contact
Factory
Contact
Factory
QUANTITY DISCOUNTS
8 to 10mm
+.005/+.014mm
12 to 18mm
+.006/+.017mm
(G6 tolerance)
Quantity
Discount %
Multiplier
1
-5
Net
1.00
6
-11
18%
.82
12
-23
29%
.71
24
-49
34%
.66
50
-99
42%
.58
100
-199
48%
.52
200
-499
50%
.50
500
Up
52%
.48
UN-A-LOK INSTALLATION TOOL
!
NEW
RAM OF
ARBOR
PRESS
CL-1-ULT
STEPPED
SHOULDERS
MATE WITH
UN-A-LOK
HEAD
PRICE
1-5
10mm
12mm
12.039-12.028mm 16mm
12mm
15mm
20mm
15.039-15.028mm 25mm
12mm
18mm
20mm
18.039-18.028mm 25mm
16mm
22mm
28mm
22.048-22.035mm
36mm
16mm
26mm
28mm
26.048-26.035mm 36mm

3/16 to 5/16"
1/2"
3/4"
1"
PART NO.
METRIC
APPLICATIONS:
UL-20-5
UL-20-5U
ULM-12-10
3/4
LENGTH
Please see our web

ID
LOCK TAB
CLEARANCE
SLOT
JIG
PLATE
UN-A-LOK
INSERTING
TOOL
UN-A-LOK
PRESS FIT
LINER
PILOT END WITH

STEPPED ODS TO FIT
ALL UN-A-LOK IDS
33BU
LOCKSCREWS AND CLAMPS

STANDARD MOUNTING (USA)
LOCKSCREWS
LS-0
LS-1
LS-2
LS-3
LS-4*
LS-5*
7/16
5/8
7/8
1
1-1/16
1-1/8
B
DIA
C
DIA
3/16
5/16
3/8
5/8
7/16
3/4
3/16
1/4
3/8
3/8
7/16
1/2
THREAD
.105/.100 #8-32
.138/.132
5/16-18
.200/.194
.200/.194
.231/.225 3/8-16
.263/.257
PRICE
(NET)
Please see web
catalog for pricing
PART
NO.
STANDARD MOUNTING THINWALL (USA)

A
F
TW-1
TW-2
TW-3
TW-4
TW-5
TW-7
7/16
1/2
11/16
7/8
1
3/4
LSM-1
LSM-3
LSM-5
LSM-7
15mm
18mm
22mm
32mm
LSM-2
LSM-4
LSM-6
LSM-8
18mm
22mm
27mm
38mm
3/16
3/8
5/16
3/8
7/16
9/16
3/8
5/8
1/4
3/16
1/4
3/8
1/2
5/8
3/8
.105/.100 #8-32
.138/.132 #10-32
.200/.194
.263/.257
.325/.319 5/16-18
.200/.194
Please see web

catalog for pricing
STANDARD MOUNTING (METRIC)

B
* For extended-range bushings.
13mm
16mm
20mm
24mm
6mm
8mm
10mm
12mm
3.3mm
4.3mm
5.8mm
7.3mm
M5
M6
M8
M10
PROJECTED MOUNTING (METRIC)
ROUND CLAMPS
7.5mm
9.5mm
12mm
15mm
13mm
16mm
20mm
24mm
9mm 6.3mm
12mm 8.3mm
15mm 10.8mm
18mm 13.3mm
M5
M6
M8
M10
Please
see web
catalog
The most popular locking device for renewable drill bushings. Use
on either the slip or fixed side of a slip-fixed bushing. Simple,
strong, compact, and economical.
7.5mm
9.5mm
12mm
15mm
Please
see web
catalog

PART
NO.
A
DIA
RCM-1
RCM-3
RCM-5
RCM-7
13mm
16mm
20mm
24mm
RCM-2
RCM-4
RCM-6
RCM-8
13mm
16mm
20mm
24mm
5/16
7/16
1/2
17/32
9/16
5/32 17/32 .109 .125

7/32 29/32 .125 .188
9/32 1-13/32
.188
.156 .219
1/4 2-1/2
.250
H SOCKET- REPLACES PRICE

HEAD CAP LOCK
SCREW (NET)
SCREW
5/16-18
3/8-16
LS-1
LS-2
LS-3
LS-4
LS-5
Please see
web catalog
for pricing
RC-01
5/8
RC-02
RC-03
RC-04* 3/4
RC-05*
STANDARD MOUNTING (METRIC)

F
G
+.000
.010
4mm
5mm
5mm
7mm
9.5mm
15mm
30mm
80mm
2.8mm
3.3mm
3.8mm
4.5mm
3mm M5
4mm M6
5.5mm M8
7mm M10
LSM-1
LSM-3
LSM-5
LSM-7
PROJECTED MOUNTING (METRIC)

11mm
14mm
17mm
22mm
4mm
5mm
5mm
7mm
9.5mm
15mm
30mm
80mm
2.8mm
3.3mm
3.8mm
4.5mm
6mm
M5
8mm
M6
10.5mm M8
13mm M10
LSM-2
LSM-4
LSM-6
LSM-8
Please
see web
catalog
8mm
10mm
12mm
16mm
Please
see web
catalog
Alternative to lockscrews when

using the fixed side of a slipfixed SF bushing. Round clamps
have less clearance under their
heads, to clamp bushings tighter
(which is why you cannot use
them on the bushings slip
side). Use them with a sockethead cap screw.
LOCKSCREW LOCATING JIG
CL-1-LSLJ
34BU
A precision tool for centerpunching lockscrew

holes. The jig is made in two parts: a reversible
centerpunch and an outer body for locating. To
use, just insert the bushing and place the locating jig against the lockscrew recess. Turn bushing to desired orientation, then tap centerpunch
lightly. For installing lockscrews LS-1, LS-2, LS3, LS-4, LS-5, TW-5, and TW-7. Also for
installing round clamps RC-01, RC-02, RC-03,
RC-04, and RC-05.
(5/05)
LOCKSCREWS AND CLAMPS

ROUND END CLAMPS
B
1/2 D

D
H
A heavy-duty alternative to lockscrews. Allows locating

tapped hole farther away from bushing to avoid interference
with a larger liner. Use on either the slip or fixed side of a
slip-fixed renewable bushing. Available in two heights:
standard for recessed liner mounting; tall for projected headliner mounting. Use with a socket-head cap screw.
RK-01 7/16
5/16 3/16 1/8
3/4 5/8
RK-02 1/2
3/8 1/4 3/16
1
RK-03 5/8
3/4 3/8 5/16 3/16
7/16
RK-04*
7/32
11/16 1-1/8 3/4
5/16
1/2
RK-05*
1/4
H
SOCKET-HEAD
CAP SCREW
1/4-20
5/16
5/16-18
3/8
3/8-16
3/8
PRICE
(NET)
PROJECTED MOUNTING (USA)

PART
NO.
7/32
1/4
5/16
1/4
3/8
3/8
5/16 13/32
7/16
15/32
H
SOCKET-HEAD
CAP SCREW
1/4-20
5/16
3/8-16
3/8
PRICE
(NET)
3/8 3/16
1/2
5/8
3/4
for pricing.
1/2
See our web catalog
RK-10
7/16
RK-11
3/4 5/8
RK-12
1/2
RK-13
RK-14 5/8
1
RK-15*
3/4
RK-16* 11/16 1-1/8
RK-17*
Projected
Mounting
Standard
Mounting
for pricing.
See our website
R
RADIUS
PART
NO.
FLAT CLAMPS
H
1/2 D
D
B
A
3/8
E
F
2 HOLE H
MOUNTING
Use to lock FM-type fixed-renewable bushings which have a

milled locking flat. Available in two heights: standard for
recessed liner mounting; tall for projected head-liner
mounting. Use with one or two socket-head cap screws.
7/8
1
1-1/8
5/8
5/8 5/16 3/16 1/8

1/4
3/16
3/8
1
5/16
1-1/4 3/8
7/32
51/64 1-11/64 1-3/4
27/64
1-1/4 1/2
1/4
1-3/4
2
1
2
H
PRICE
SOCKET-HEAD
CAP SCREW (NET)
1/4-20
5/16-18
3/8-16
PROJECTED MOUNTING (USA)

PART
NO.
NO.
OF
HOLES
FC-10
5/8
7/8
1/2
1
FC-11
FC-12
1
1
1
5/8
FC-13
1-1/4
FC-14 1
5/8 1-1/8
1-3/4
FC-15 2
1-1/4
FC-16* 1
1-3/4
FC-17* 2
FC-18* 1 51/64 1-11/64 1-1/4
1-3/4
FC-19* 2
1-1/4
FC-20* 1
1-3/4
FC-21* 2
3/8 3/16
1/2
1/4
1/2 5/16
7/32
1/4
5/16
3/8
H
PRICE
SOCKET-HEAD
CAP SCREW (NET)
1/4-20
5/16-18
3/8
13/32
5/8
3/8-16
27/64 7/16
3/4
for pricing.
(7/02)
Projected
Mounting
1/2
See our web catalog
Standard
Mounting
for pricing.
B
G
FC-01
FC-02
FC-03
FC-04*
FC-05*
FC-06*
FC-07*
See our web catalog
1 D
PART
NO.
NO.
OF
HOLES
15/32
35BU
CH
CHIP BREAKER
CH-20-16-.1250 NCB
CHM-10-20-4.50
PCH-20-16-.1250
HCH-20-16-.1250
DCCH-20-16-.1250
No counterbore on long bushings marked

with * (no counterbore is standard on all other
bushings)
Standard metric SF-type bushing with
chip breaker
P bushing with chip breaker
H bushing with chip breaker
Directed coolant bushing with chip breaker
USA
BODY
OD
5/16
1/2
3/4
1
1-3/8
1-3/4
2-1/4
35/64
51/64
1-3/64
1-27/64
1-51/64
2-19/64
2-51/64
1/4
1/8
3/8
3/16
3/8
3/16
11/64
19/64
27/64
19/32
25/32
1
1-1/4
65
65
50
35
30
30
25
LOCK
SCREW
5/8
1/2
LS-1
3/4
5/8
7/8
3/4
1-7/64
59/64
LS-2
1-19/64 1-7/64
1-41/64 1-25/64
LS-3
1-57/64 1-41/64
METRIC
BODY
OD
8mm
10mm
12mm
15mm
18mm
22mm
26mm
30mm
35mm
42mm
48mm
55mm
62mm
15mm
4.5mm
6mm 3mm
18mm
6mm
22mm
7.5mm
26mm 8mm 4mm 9.5mm
30mm
11.5mm
34mm
13mm
39mm
15.5mm
46mm 10mm 5.5mm 19mm
52mm
22mm
59mm
25.5mm
66mm
28.5mm
74mm 12mm 7mm 32.5mm
82mm
36.5mm
L
65
65
60
50
50
35
35
30
30
30
30
25
25
R
11.5mm
13mm
16mm
18mm
20mm
23.5mm
26mm
29.5mm
32.5mm
36mm
41mm
45mm
49mm
LOCK
SCREW
LSM-1
LSM-2
LSM-3
LSM-4
LSM-5
LSM-6
LSM-7
LSM-8
From #80 to 1/4"
+.0001/+.0004
Over 1/4 to 3/4"
+.0001/+.0005
Over 3/4 to 1-1/2"
+.0002/+.0006
Over 1-1/2 to 2-3/4" +.0003/+.0007

ID
RANGE
OD
.0625-.0934
1/16-#43
1.60-2.35mm
.0935-.1935
#42-#10
2.40-4.90mm
5/16
.3125-.3123
.1405-.3438
#28-11/32
3.60-8.70mm
1/2
.5000-.4998
.2812-.5625
9/32-9/16
7.20-14.00mm
3/4
.7500-.7498
.4688-.7812
1
15/32-25/32
11.50-19.50mm 1.0000-.9998
APPLICATIONS:
Similar to an SF renewable bushing, but with specially designed chipbreaking notches on the drill-exit end. Use to break up chips from
tough stringy materials, to reduce friction and heat buildup. Reduces
bushing wear at the drill-exit end and reduces the chance of tool or
workpiece damage. A chip-breaker bushing should extend beyond its
liner to allow chips to escape. Chip breakers are also available on
other bushing types such as P, H, and DC (directed coolant).
ORDERING EXAMPLES:
CH-20-16-.1250
CH-20-16-.1772
36BU
Standard USA SF-type bushing with chip

breaker, inch ID
Standard USA SF-type bushing with chip
breaker, mm ID (.1772 = 4.50mm)
.7188-1.0625
1-3/8
23/321-1/16
18.50-27.00mm 1.3750-1.3747
.9688-1.4062
1-3/4
31/321-13/32
1.7500-1.7497
25.00-35.00mm
1.3438-1.8750
2-1/4
1-11/321-7/8 2.2500-2.2496
35.00-47.00mm
From .35 to 3mm

+.002/+.008mm
Over 3 to 6mm
+.004/+.012mm
Over 6 to 10mm
+.005/+.014mm
Over 10 to 18mm
+.006/+.017mm
Over 18 to 30mm
+.007/+.020mm
Over 30 to 50mm
+.009/+.025mm
(G6 tolerance)
ANSI
PRICE LOCK
LENGTH PART NO.
1-5
SCREW
*3/4
*1
*1-3/8
*3/4
*1
*1-3/8
*3/4
*1
*1-3/8
*1-3/4
*2-1/8
1
1-3/8
1-3/4
2-1/8
*2-1/2
1
1-3/8
1-3/4
2-1/8
2-1/2
3
1
1-3/8
1-3/4
2-1/8
2-1/2
3
1-3/8
1-3/4
2-1/8
2-1/2
3
1-3/8
1-3/4
2-1/8
2-1/2
3
CH-20-12
CH-20-16
CH-20-22
CH-20-12
CH-20-16
CH-20-22
CH-32-12
CH-32-16
CH-32-22
CH-32-28
CH-32-34
CH-48-16
CH-48-22
CH-48-28
CH-48-34
CH-48-40
CH-64-16
CH-64-22
CH-64-28
CH-64-34
CH-64-40
CH-64-48
CH-88-16
CH-88-22
CH-88-28
CH-88-34
CH-88-40
CH-88-48
CH-112-22
CH-112-28
CH-112-34
CH-112-40
CH-112-48
CH-144-22
CH-144-28
CH-144-34
CH-144-40
CH-144-48
LS-1
Contact RC-01
Factory RK-01
RK-10
LS-1
Contact RC-01
Factory RK-01
RK-10
LS-1
Contact RC-01
Factory RK-01
RK-10
LS-1
Contact RC-01
Factory RK-01
RK-11
LS-2
Contact RC-02
Factory RK-02
RK-12
LS-2
Contact RC-02
Factory RK-02
RK-12
LS-3
Contact RC-03
Factory RK-03
RK-13
LS-3
Contact RC-03
Factory RK-03
RK-13
* Counterbored, leaving correct drill-bearing length and chip clearance

(8/03)
CHIP BREAKER
METRIC
ID RANGE
(G6)
1.00-4.00mm
4.01-6.00mm
OD
(h5)
ANSI
LENGTH PART NO.
PRICE
CHM
LOCK
SCREW
*10mm CHM-8-10
8mm
8.000-7.994mm *16mm CHM-8-16
Contact
Factory LSM-1
LSM-2
12mm CHM-10-12
RCM-1
10mm
20mm CHM-10-20 Contact RCM-2
10.000-9.994mm
Factory
25mm CHM-10-25
12mm CHM-12-12
12mm
Contact
6.01-8.00mm 12.000-11.992mm 20mm CHM-12-20 Factory
25mm CHM-12-25
16mm CHM-15-16
LSM-3
36mm CHM-15-36
RCM-4
Contact LSM-4
15mm
8.01-10.00mm 15.000-14.992mm 28mm CHM-15-28 Factory RCM-3
16mm CHM-18-16
18mm
Contact
36mm CHM-18-36
20mm CHM-22-20
Contact
22mm
45mm CHM-22-45
20mm CHM-26-20
26mm
Contact
Why settle
for
the rest
when
you can have
the best?
45mm CHM-26-45
25mm CHM-30-25
LSM-5
56mm CHM-30-56
RCM-6
Contact LSM-6
30mm
18.01-22.00mm 30.000-29.991mm 45mm CHM-30-45 Factory RCM-5
25mm CHM-35-25
35mm
Contact
22.01-26.00mm 35.000-34.989mm 45mm CHM-35-45
Factory
56mm CHM-35-56
30mm CHM-42-30
42mm
Contact
26.01-30.00mm 42.000-41.989mm 56mm CHM-42-56
Factory
67mm CHM-42-67
30mm CHM-48-30
48mm
Contact
67mm CHM-48-67
30mm CHM-55-30
LSM-7
67mm CHM-55-67
RCM-8
55mm
Contact LSM-8
35.01-42.00mm 55.000-54.987mm 56mm CHM-55-56
Factory RCM-7
35mm CHM-62-35
62mm
Contact
42.01-48.00mm 62.000-61.987mm 67mm CHM-62-67
Factory
Weve done
well,
now
lets excel.
78mm CHM-62-78

(12/07)
37BU
DC
DIRECTED COOLANT
From #80 to 1/4"
+.0001/+.0004
Over 1/4 to 3/4"
+.0001/+.0005
Over 3/4 to 1-1/2"
+.0002/+.0006
From .35 to 3mm

Over 3 to 6mm
Over 6 to 10mm
Over 10 to 18mm
Over 18 to 30mm
Over 30 to 50mm
+.002/+.008mm
+.004/+.012mm
+.005/+.014mm
+.006/+.017mm
+.007/+.020mm
+.009/+.025mm
Over 1-1/2 to 2-3/4" +.0003/+.0007
BODY
OD
F
DIA
5/16
1/2
3/4
1
1-3/8
1-3/4
2-1/4
35/64
51/64
1-3/64
1-27/64
1-51/64
2-19/64
2-51/64
BODY
OD
5/16
1/2
3/4
1
1-3/8
1-3/4
2-1/4
1/4
3/8
1/8
3/16
3/32 3/16
1/2
3/32 5/16**
5/8
1/8
3/4
5/16
1/8
59/64
5/16
3/16
1-7/64
3/16 7/16 1-25/64
3/16
1-41/64
N
DIA
11/64
19/64
27/64
19/32
25/32
1
1-1/4
65
65
50
35
30
30
25
5/8
3/4
7/8
1-7/64
1-19/64
1-41/64
1-57/64
5/8
7/8
1-1/8
1-1/2
1-7/8
2-3/8
2-7/8
T
DIA
U
DIA
5/64
9/64
17/64
23/64
17/32
11/16
7/8
.067
.093
.104
.125
.147
.173
.173
25/64
19/32**
55/64
1-5/32
1-17/32
1-31/32
2-15/32
5/32
7/32**
7/32
7/32
9/32
** Q = 3/16, U = 39/64, V = 5/32 on 1/2" long liner bushings.
APPLICATIONS:
Similar to an SF renewable bushing, but with passages to direct
coolant to the cutting area. This design is particularly good for
washing away chips, especially when ordered as the combination
Directed Coolant Chip Breaker (DCCH). DC bushings require
special liners, DCL or DCHL, to direct coolant from a drilled
manifold passage to the holes in the bushings OD wall. Important
note: Always order matching liner length (see page 39.)
From #60 to 1/4"
+.0005/+.0008
Over 1/4 to 1"
+.0006/+.0010
Over 1 to 1-1/2"
+.0008/+.0012
5/16"
1/2"
3/4"
1"
+.0001/+.0004
+.0002/+.0005
+.0003/+.0006
+.0004/+.0007
ID
RANGE
OD
.0625-.0934
1/16-#43
1.60-2.35mm
.0935-.1935
#42-#10
2.40-4.90mm
5/16
.3125-.3123
.1405-.3438
#28-11/32
3.60-8.70mm
1/2
.5000-.4998
.2812-.5625
9/32-9/16
7.20-14.00mm
3/4
.7500-.7498
.4688-.7812
1
15/32-25/32
11.50-19.50mm 1.0000-.9998
.7188-1.0625
1-3/8
23/321-1/16
18.50-27.00mm 1.3750-1.3747
ORDERING EXAMPLES:
DC-20-12-.1250
Standard USA directed-coolant bushing,

inch ID
DCCH-20-16-.1250
Same as above, except with chip breakers
(go to next length so that chip breakers
extend beyond the liner)
DC-20-12-.1772
Standard USA directed-coolant bushing,
mm ID (.1772 = 4.50 mm)
DC-20-12-.1250 REAMER Reamer tolerance on ID
DC-20-12-.1250 NCB
No counterbore on long bushings marked
with * ( no counterbore is standard on all
other bushings)
DCL-32-12
Liner for renewable bushings above
DCHL-32-12
Head liner for renewable bushings above
38BU
From 1 to 3mm
Over 3 to 6mm
Over 6 to 10mm
Over 10 to 18mm
Over 18 to 30mm
.9688-1.4062
1-3/4
31/321-13/32
1.7500-1.7497
25.00-35.00mm
1.3438-1.8750
2-1/4
1-11/321-7/8 2.2500-2.2496
35.00-47.00mm
1-3/8"
1-3/4"
2-1/4"
LENGTH PART NO.
*3/4
*1
*1-3/8
*3/4
*1
*1-3/8
*3/4
*1
*1-3/8
*1-3/4
*2-1/8
1
1-3/8
1-3/4
2-1/8
*2-1/2
1
1-3/8
1-3/4
2-1/8
2-1/2
3
1
1-3/8
1-3/4
2-1/8
2-1/2
3
1-3/8
1-3/4
2-1/8
2-1/2
3
1-3/8
1-3/4
2-1/8
2-1/2
3
DC-20-12
DC-20-16
DC-20-22
DC-20-12
DC-20-16
DC-20-22
DC-32-12
DC-32-16
DC-32-22
DC-32-28
DC-32-34
DC-48-16
DC-48-22
DC-48-28
DC-48-34
DC-48-40
DC-64-16
DC-64-22
DC-64-28
DC-64-34
DC-64-40
DC-64-48
DC-88-16
DC-88-22
DC-88-28
DC-88-34
DC-88-40
DC-88-48
DC-112-22
DC-112-28
DC-112-34
DC-112-40
DC-112-48
DC-144-22
DC-144-28
DC-144-34
DC-144-40
DC-144-48
+.006/+.012mm
+.010/+.018mm
+.013/+.022mm
+.016/+.027mm
+.020/+.033mm
+.0006/+.0010
+.0008/+.0012
+.0010/+.0015
PRICE LOCK
1-5 SCREW
LS-1
Contact RC-01
Factory RK-01
RK-11
LS-1
Contact RC-01
Factory RK-01
RK-11
LS-1
Contact RC-01
Factory RK-01
RK-11
LS-1
Contact RC-01
Factory RK-01
RK-11
LS-2
Contact RC-02
Factory RK-02
RK-12
LS-2
Contact RC-02
Factory RK-02
RK-12
LS-3
Contact RC-03
Factory RK-03
RK-13
LS-3
Contact RC-03
Factory RK-03
RK-13
* Counterbored, leaving correct drill-bearing length and chip clearance

(see page 6 for depth).
(12/07)
DC
DIRECTED COOLANT
LENGTH
LENGTH
ID
ID
OD
Q
DIA
OD
Q
DIA
SEE BELOW AND PAGE 38 FOR DIMENSIONS
HEAD LINERS
LINERS
ID
OD
1/2
3/4
.7518-.7515
(.770-.765 UNG)
3/4
1
1.0018-1.0015
(1.020-1.015 UNG)
1-3/8
1.3772-1.3768
(1.395-1.390 UNG)
1-3/4
1.7523-1.7519
1-3/8 (1.770-1.765 UNG)
1-3/4
2-1/4
2.2525-2.2521
(2.270-2.265 UNG)
2-1/4
2-3/4
2.7526-2.7522
(2.770-2.765 UNG)
(12/07)
1/2
3/4
1
1-3/8
1/2
3/4
1
1-3/8
1-3/4
2-1/8
3/4
1
1-3/8
1-3/4
2-1/8
2-1/2
3/4
1
1-3/8
1-3/4
2-1/8
2-1/2
3
3/4
1
1-3/8
1-3/4
2-1/8
2-1/2
3
1
1-3/8
1-3/4
2-1/8
2-1/2
3
1
1-3/8
1-3/4
2-1/8
2-1/2
3
DCL-32-8
DCL-32-12
DCL-32-16
DCL-32-22
DCL-48-8
DCL-48-12
DCL-48-16
DCL-48-22
DCL-48-28
DCL-48-34
DCL-64-12
DCL-64-16
DCL-64-22
DCL-64-28
DCL-64-34
DCL-64-40
DCL-88-12
DCL-88-16
DCL-88-22
DCL-88-28
DCL-88-34
DCL-88-40
DCL-88-48
DCL-112-12
DCL-112-16
DCL-112-22
DCL-112-28
DCL-112-34
DCL-112-40
DCL-112-48
DCL-144-16
DCL-144-22
DCL-144-28
DCL-144-34
DCL-144-40
DCL-144-48
DCL-176-16
DCL-176-22
DCL-176-28
DCL-176-34
DCL-176-40
DCL-176-48
PRICE
STANDARD
CHIP BREAKER
HEAD LINER
PART NO.
DC-20-12
DC-20-16
DC-20-22
DC-32-12
DC-32-16
DC-32-22
DC-32-28
DC-32-34
DC-48-16
DC-48-22
DC-48-28
DC-48-34
DC-48-40
DC-64-16
DC-64-22
DC-64-28
DC-64-34
DC-64-40
DC-64-48
DC-88-16
DC-88-22
DC-88-28
DC-88-34
DC-88-40
DC-88-48
DC-112-22
DC-112-28
DC-112-34
DC-112-40
DC-112-48
DC-144-22
DC-144-28
DC-144-34
DC-144-40
DC-144-48
DCCH-20-12
DCCH-20-16
DCCH-20-22
DCCH-32-12
DCCH-32-16
DCCH-32-22
DCCH-32-28
DCCH-32-34
DCCH-48-16
DCCH-48-22
DCCH-48-28
DCCH-48-34
DCCH-48-40
DCCH-64-16
DCCH-64-22
DCCH-64-28
DCCH-64-34
DCCH-64-40
DCCH-64-48
DCCH-88-16
DCCH-88-22
DCCH-88-28
DCCH-88-34
DCCH-88-40
DCCH-88-48
DCCH-112-22
DCCH-112-28
DCCH-112-34
DCCH-112-40
DCCH-112-48
DCCH-144-22
DCCH-144-28
DCCH-144-34
DCCH-144-40
DCCH-144-48
DCHL-32-8
DCHL-32-12
DCHL-32-16
DCHL-32-22
DCHL-48-8
DCHL-48-12
DCHL-48-16
DCHL-48-22
DCHL-48-28
DCHL-48-34
DCHL-64-12
DCHL-64-16
DCHL-64-22
DCHL-64-28
DCHL-64-34
DCHL-64-40
DCHL-88-12
DCHL-88-16
DCHL-88-22
DCHL-88-28
DCHL-88-34
DCHL-88-40
DCHL-88-48
DCHL-112-12
DCHL-112-16
DCHL-112-22
DCHL-112-28
DCHL-112-34
DCHL-112-40
DCHL-112-48
DCHL-144-16
DCHL-144-22
DCHL-144-28
DCHL-144-34
DCHL-144-40
DCHL-144-48
DCHL-176-16
DCHL-176-22
DCHL-176-28
DCHL-176-34
DCHL-176-40
DCHL-176-48
PRICE
1/2
.5017-.5014
(.520-.515 UNG)
LINER
PART NO.
5/16
LENGTH
MATCHING RENEWABLE BUSHING
MATCHING RENEWABLE BUSHING

STANDARD
DC-20-12
DC-20-16
DC-20-22
DC-32-12
DC-32-16
DC-32-22
DC-32-28
DC-32-34
DC-48-16
DC-48-22
DC-48-28
DC-48-34
DC-48-40
DC-64-16
DC-64-22
DC-64-28
DC-64-34
DC-64-40
DC-64-48
DC-88-16
DC-88-22
DC-88-28
DC-88-34
DC-88-40
DC-88-48
DC-112-22
DC-112-28
DC-112-34
DC-112-40
DC-112-48
DC-144-22
DC-144-28
DC-144-34
DC-144-40
DC-144-48
CHIP BREAKER
DCCH-20-12
DCCH-20-16
DCCH-20-22
DCCH-32-12
DCCH-32-16
DCCH-32-22
DCCH-32-28
DCCH-32-34
DCCH-48-16
DCCH-48-22
DCCH-48-28
DCCH-48-34
DCCH-48-40
DCCH-64-16
DCCH-64-22
DCCH-64-28
DCCH-64-34
DCCH-64-40
DCCH-64-48
DCCH-88-16
DCCH-88-22
DCCH-88-28
DCCH-88-34
DCCH-88-40
DCCH-88-48
DCCH-112-22
DCCH-112-28
DCCH-112-34
DCCH-112-40
DCCH-112-48
DCCH-144-22
DCCH-144-28
DCCH-144-34
DCCH-144-40
DCCH-144-48
39BU
OIL GROOVE
APPLICATIONS:
Oil grooves are available on most drill-bushing types, including P, H,
and SF. Use when you need complete drill lubrication and cooling,
such as when drilling hardened steel. Oil grooves are specially
designed coolant passageways in the bushings ID wall. Choose
from 25 different groove styles. End wipers are also available, to
keep out dirt and chips.
OPTIONAL WIPERS
45 TYP.
.020/.030
TYPICAL FLAT.
WIPER END
SHARP
BOTH ENDS
Coolant passage
ORDERING EXAMPLES:
P-48-16-.5000-AJ
P-48-16-.4724-AJ
P-48-16-.5000-AJ-AAA
SF-48-16-.5000-AJ
P bushing with AJ oil groove, inch ID

P bushing with AJ oil groove, mm ID
(.4724 = 12.00mm)
P bushing with AJ oil groove and AAA
wiper
SF bushing with AJ oil groove
STYLE AAA
HEADLESS BUSHINGS
THREE GENERAL TYPES:

1. With oil hole. A single radial hole in the bushing wall allows
coolant to flow from a manifold passage to the internal oil grooves.
Bushing must be installed to line up the radial hole with the manifold
passage.
WIPER END
2. With oil hole and external groove. OD groove allows coolant to

flow around the bushing, then through the radial hole in the bushing's wall to the internal oil grooves. Allows installing the bushing at
any orientation, and mounting bushings in series using a single manifold passage. This type is our most popular.
3. Without oil feed. No external coolant feed through a manifold passage, so all coolant enters through the top. This type is also commonly used as a bearing bushing, packed with oil or grease.
OIL-GROOVE STYLES:
We offer a wide selection of oil-groove styles in each general type.
This allows choosing a style to suit various operating conditions,
lubrication requirements, and individual preferences.
STYLE ABB
HEAD-TYPE BUSHINGS
OPTIONAL WIPERS:
To guard against dirt and chips entering the bushing ID, order oilgroove bushings with a wiper end. Note: do not order an oil-groove
style that breaks out at the wiper end (AA, AB, AG, AH, AD, or AE).
Order style AAA for headless bushings (install wiper in either direction). Order style ABB or ACC for head-type bushings.
TECHNICAL DATA:
Oil-groove dimensions - 1/16" wide x 1/32" deep
Oil-hole dimensions - 1/4" diameter
External-groove dimensions - 5/16" wide x 3/64" deep
Allowable ID range - 1/2" to 8"
Allowable length range - 1/2" to 8"
Oil grooves stop 1/8" short of bushing end
WIPER END
STYLE ACC
HEAD-TYPE BUSHINGS
PRICING:
Please contact factory for pricing on oil-groove bushings.
40BU
(12/07)
OIL GROOVE
WITH
OIL HOLE
AC
Helix
WITH OIL HOLE &

EXTERNAL GROOVE
AA
Helix
Open Bottom
AJ
Helix
AG
Helix
Open Bottom
WITHOUT
OIL FEED
AF
Helix
AE
AB
Helix
Open both ends
AL
Straight
AH
Helix
Open both ends
AO
Helix
Open both ends
AT
Loop
AU
Double Loop
AS
Loop
Figure 8
(2/89)
Double Figure 8
AP
Figure 8
AW
Double Loop
AV
AQ
AX
AK
Straight
Double Loop
Figure 8
AN
Helix
Open Bottom
Two Holes
Loop
AR
AD
AY
Double Figure 8
AZ
Double Figure 8
AM
Helix
with ID groove
41BU
OIL GROOVE
OIL-GROOVE CONVERSION CHART

Carr Lane
Ace
Acme
American
Briney
Economy
Style AA
Type 1
Style 5
Style 1
Style A
Style A
Style AB
Type 2
Style 8
Style 2
Style B
Style AC
Type 3
Style 2
Style 3
Style C
Style AD
Type 4
Style 4
Style 4
Style AE
Type 6
Style 7
Style 5
Style AF
Type 5
Style 1
Style AG
Type 7
Style 6
Style AH
Type 8
Style AJ
Type 9
Style AK
Style AL
United
Universal
Welch
Style 1A
Style A
Style A
Style B
Style 2A
Style B
Style B
Style C
Style 3A
Style C
Style C
Style D
Style D
Style 1
Style D
Style D
Style E
Style E
Style 2
Style E
Style E
Style 6
Style F
Style F
Style 3
Style F
Style F
Style 7
Style G
Style G
Style 1B
Style G
Style G
Style 9
Style 8
Style H
Style H
Style 2B
Style H
Style H
Style 3
Style 9
Style J
Style J
Style 3B
Style J
Style J
Type 10
Style 10
Style 10
Style K
Style K
Style 4
Style K
Style K
Type 11
Style 11
Style 11
Style L
Style L
Style 4A
Style L
Style L
Style AM
Type 12
Style 12
Style M
Style M
Style 6
Style M
Style M
Style AN
Type 14
Style 20
Style 13
Style N
Style N
Style 7A
Style N
Style N
Style AO
Type 13
Style 12
Style 14
Style O
Style O
Style 12C
Style O
Style O
Style AP
Type 15
Style 21
Style 15
Style P
Style P
Style 7B
Style P
Style P
Style AQ
Type 16
Style 19
Style 16
Style Q
Style Q
Style 7
Style Q
Style Q
Style AR
Type 17
Style 14
Style 17
Style R
Style R
Style 9A
Style R
Style R
Style AS
Type 18
Style 15
Style 18
Style S
Style S
Style 9B
Style S
Style S
Style AJ
Type 19
Style 13
Style 19
Style T
Style T
Style 9
Style T
Style T
Style AU
Type 20
Style 17
Style 20
Style U
Style U
Style 10A
Style U
Style U
Style AV
Type 21
Style 18
Style 21
Style V
Style V
Style 10B
Style V
Style V
Style AW
Type 22
Style 16
Style 22
Style W
Style W
Style 10
Style W
Style W
Style AX
Type 23
Style 23
Style 23
Style X
Style X
Style 8A
Style X
Style X
Style AY
Type 24
Style 24
Style 24
Style Y
Style Y
Style 8B
Style Y
Style Y
Style AZ
Type 25
Style 22
Style 25
Style Z
Style Z
Style 8
Style Z
Style Z
WIPER CONVERSION CHART

Carr Lane
Ace
Style AAA
Type WEA
Style WA
Style ABB
Type WEB
Style ACC
Type WEC
42BU
Acme
American
Briney
Economy
United
Universal
Welch
Style A
Style AA
Style AA
Style PE
Style AA
Style AA
Style WC
Style B
Style BB
Style BB
Style HW
Style BB
Style BB
Style WB
Style C
Style CC
Style CC
Style HE
Style CC
Style CC
(2/89)
DG
DIAMOND GROOVE
OD
ID
APPLICATIONS:
A bushing for cast-in-place or potted installation. Diamond-knurled
OD provides superior holding strength against both rotational and
axial forces. Since the bushings OD is not ground, keep the ID accurately located during casting or potting to ensure accuracy in the finished tool.
ORDERING EXAMPLES:
DG-26-16-.1875
DG-26-16-.1772
DG-26-16-.1875 REAMER
DG-26-16-.1875 NCB
DGM-8-12-4.50

(.1772 = 4.50mm)
Reamer tolerance on ID
Prices shown here apply to standard bushings only, for a standard

drill size within the stated ID range. See back cover for decimal equivalents. To price non-standard sizes, including all reamer and tapguide bushings, see page 7.
From #55 to 1/4"
+.0001/+.0004
Over 1/4 to 3/4"
+.0001/+.0005
Over 3/4 to 1-1/2"
+.0002/+.0006
From 1 to 3mm
+.002/+.008mm
Over 3 to 6mm
+.004/+.012mm
Over 6 to 10mm
+.005/+.014mm
Over 10 to 18mm
+.006/+.017mm
Over 18 to 19mm
+.007/+.020mm
(G6 tolerance)
OD
.0520-.0995
#55-#39
1.35-2.50mm
13/64
.223-.213
.0980-.1406
#40-9/64
2.50-3.50mm
1/4
.275-.260
.1250-.1935
1/8-#10
3.20-4.90mm
5/16
.337-.322
.1562-.2570
5/32-F
4.00-6.50mm
13/32
.431-.416
.1562-.3160
5/32-O
4.00-8.00mm
1/2
.525-.510
.3125-.4375
5/16-7/16
7.90-11.00mm
5/8
.650-.635
.3125-.5312
5/16-17/32
8.00-13.00mm
3/4
.775-.760
.5000-.6562
1/2-21/32
13.00-16.50mm
7/8
.900-.885
.5000-.7656
1
1/2-49/64
1.035-1.010
13.00-19.00mm
LENGTH
ANSI
PART NO.
PRICE
1-5
1/4
5/16
3/8
1/2
1/4
5/16
3/8
1/2
*3/4
1/4
5/16
3/8
1/2
3/4
*1
1/4
5/16
3/8
1/2
3/4
*1
5/16
3/8
1/2
3/4
*1
3/8
1/2
3/4
1
1-3/8
3/8
1/2
3/4
1
1-3/8
3/8
1/2
3/4
1
1-3/8
1/2
3/4
1
1-3/8
1-1/2
DG-13-4
DG-13-5
DG-13-6
DG-13-8
DG-16-4
DG-16-5
DG-16-6
DG-16-8
DG-16-12
DG-20-4
DG-20-5
DG-20-6
DG-20-8
DG-20-12
DG-20-16
DG-26-4
DG-26-5
DG-26-6
DG-26-8
DG-26-12
DG-26-16
DG-32-5
DG-32-6
DG-32-8
DG-32-12
DG-32-16
DG-40-6
DG-40-8
DG-40-12
DG-40-16
DG-40-22
DG-48-6
DG-48-8
DG-48-12
DG-48-16
DG-48-22
DG-56-6
DG-56-8
DG-56-12
DG-56-16
DG-56-22
DG-64-8
DG-64-12
DG-64-16
DG-64-22
DG-64-24
LENGTH
ID
RANGE

From #60 to 1/4"
+.0005/+.0008
Over 1/4 to 1"
+.0006/+.0010
(7/01)
From 1 to 3mm
+.006/+.012mm
Over 3 to 6mm
+.010/+.018mm
Over 6 to 10mm
+.013/+.022mm
Over 10 to 18mm
+.016/+.027mm
Over 18 to 19mm
+.020/+.033mm
(F6 tolerance)
QUANTITY DISCOUNTS
Quantity
Discount %
Multiplier
1
-5
Net
1.00
6
-11
18%
.82
12
-23
29%
.71
24
-49
34%
.66
50
-99
42%
.58
100
-199
48%
.52
200
-499
50%
.50
500
Up
52%
.48
43BU
DGM
ID RANGE
(G6)
LENGTH
OD
1.00-1.80mm
5mm
5.50-5.25mm
1.81-2.60mm
2.61-3.30mm
DIAMOND GROOVE
METRIC
6mm
6.65-6.25mm
ANSI
PART NO.
6mm
DGM-5-6
9mm
DGM-5-9
6mm
DGM-5-6
9mm
DGM-5-9
8mm
DGM-6-8
PRICE
1-5
12mm DGM-6-12
16mm DGM-6-16
8mm
3.31-4.00mm
7mm
7.65-7.25mm
DGM-7-8
12mm DGM-7-12
16mm DGM-7-16
4.01-5.00mm
DGM-8-8
12mm DGM-8-12
16mm DGM-8-16
10mm DGM-10-10
5.01-6.00mm
10mm
16mm DGM-10-16
10.65-10.25mm
20mm DGM-10-20
10mm DGM-12-10
6.01-8.00mm
12mm
16mm DGM-12-16
12.65-12.25mm
20mm DGM-12-20
12mm DGM-15-12
8.01-10.00mm
15mm
20mm DGM-15-20
15.65-15.25mm
8mm
8mm
8.65-8.25mm
25mm DGM-15-25
12mm DGM-18-12
18mm
20mm DGM-18-20
10.01-12.00mm
18.65-18.25mm
25mm DGM-18-25
16mm DGM-22-16
22mm
12.01-15.00mm 22.65-22.25mm 28mm DGM-22-28
36mm DGM-22-36
16mm DGM-26-16
26mm
15.01-18.00mm 26.90-26.25mm 28mm DGM-26-28
36mm DGM-26-36
Something
you get
for nothing
is usually
worth it.
Temper is
what gets
most of us
into trouble.
Pride is
what keeps
us there.
QUANTITY DISCOUNTS
Quantity
Discount %
Multiplier
44BU
1
-5
Net
1.00
6
-11
18%
.82
12
-23
29%
.71
24
-49
34%
.66
50
-99
42%
.58
100
-199
48%
.52
200
-499
50%
.50
500
Up
52%
.48
(7/01)
SG
SERRATA GROOVE
ID
RANGE
OD
.0520-.0995
#55-#39
1.35-2.50mm
13/64
.223-.213
.0980-.1406
#40-9/64
2.50-3.50mm
1/4
.275-.260
.1250-.1935
1/8-#10
3.20-4.90mm
5/16
.337-.322
.1562-.2570
5/32-F
4.00-6.50mm
13/32
.431-.416
.1562-.3160
5/32-O
4.00-8.00mm
1/2
.525-.510
.3125-.4375
5/16-7/16
7.90-11.00mm
5/8
.650-.635
.3125-.5312
5/16-17/32
8.00-13.00mm
3/4
.775-.760
.5000-.6562
1/2-21/32
13.00-16.50mm
7/8
.900-.885
OD
ID
APPLICATIONS:
Can be cast in place or potted, just as a diamond-groove
bushing, or can also be pressed into an installation hole.
Straight knurl provides less resistance to axial loads than the
diamond knurl on a DG bushing. Since the bushings OD is not
ground, keep the ID accurately located during casting or potting to ensure accuracy in the finished tool.
ORDERING EXAMPLES:
SG-26-16-.1875
SG-26-16-.1772

(.1772 = 4.50mm)
SG-26-16-.1875 REAMER Reamer tolerance on ID
SG-26-16-.1875 NCB
From #55 to 1/4"
Over 1/4 to 3/4"
Over 3/4 to 1-1/2"
+.0001/+.0004
+.0001/+.0005
+.0002/+.0006
From 1 to 3mm
+.002/+.008mm
Over 3 to 6mm
+.004/+.012mm
Over 6 to 10mm
+.005/+.014mm
Over 10 to 18mm
+.006/+.017mm
Over 18 to 19mm
+.007/+020mm
(G6 tolerance)
.5000-.7656
1
1/2-49/64
1.035-1.010
13.00-19.00mm
LENGTH
ANSI
PART NO.
PRICE
1-5
1/4
5/16
3/8
1/2
1/4
5/16
3/8
1/2
*3/4
1/4
5/16
3/8
1/2
3/4
*1
1/4
5/16
3/8
1/2
3/4
*1
5/16
3/8
1/2
3/4
*1
3/8
1/2
3/4
1
1-3/8
3/8
1/2
3/4
1
1-3/8
3/8
1/2
3/4
1
1-3/8
1/2
3/4
1
1-3/8
1-1/2
SG-13-4
SG-13-5
SG-13-6
SG-13-8
SG-16-4
SG-16-5
SG-16-6
SG-16-8
SG-16-12
SG-20-4
SG-20-5
SG-20-6
SG-20-8
SG-20-12
SG-20-16
SG-26-4
SG-26-5
SG-26-6
SG-26-8
SG-26-12
SG-26-16
SG-32-5
SG-32-6
SG-32-8
SG-32-12
SG-32-16
SG-40-6
SG-40-8
SG-40-12
SG-40-16
SG-40-22
SG-48-6
SG-48-8
SG-48-12
SG-48-16
SG-48-22
SG-56-6
SG-56-8
SG-56-12
SG-56-16
SG-56-22
SG-64-8
SG-64-12
SG-64-16
SG-64-22
SG-64-24
LENGTH

From #60 to 1/4"
+.0005/+.0008
Over 1/4 to 1"
+.0006/+.0010
(7/01)
From 1 to 3mm
+.006/+.012mm
Over 3 to 6mm
+.010/+.018mm
Over 6 to 10mm
+.013/+.022mm
Over 10 to 18mm
+.016/+.027mm
Over 18 to 19mm
+.020/+.033mm
(F6 tolerance)
QUANTITY DISCOUNTS
Quantity
Discount %
Multiplier
1
-5
Net
1.00
6
-11
18%
.82
12
-23
29%
.71
24
-49
34%
.66
50
-99
42%
.58
100
-199
48%
.52
200
-499
50%
.50
500
Up
52%
.48
45BU
DIAMOND-KNURL
UN-A-LOK LINER
ULD
USA
ID
3/16
METRIC
USA
BODY
OD
5/16
1/2
3/4
1
1-3/8
F
DIA
1/4
.365 3/32
3/8
9/16 3/32
1/2 13/16 3/32
21/32 1-1/16 1/8
7/8 1-7/16 1/8
BODY
OD
F
DIA
12mm 9.5mm 15mm

15mm 11mm 18mm
18mm 13mm 22mm
22mm 15.5mm 26mm
26mm 17.5mm 30mm
1/2
G
3mm
3mm
4mm
4mm
4mm
3/4
5/16
.342-.332
1/2
.533-.523
3/4
.785-.775
1
1.035-1.025
1-3/8
1.415-1.405
PRICE
1-5
LENGTH
PART NO.
5/16
ULD-20-5
3/8
ULD-20-6
1/2
ULD-20-8
3/4
ULD-20-12
3/8
ULD-32-6
1/2
ULD-32-8
3/4
ULD-32-12
1/2
ULD-48-8
3/4
ULD-48-12
ULD-48-16
1/2
ULD-64-8
3/4
ULD-64-12
ULD-64-16
1/2
ULD-88-8
3/4
ULD-88-12
ULD-88-16
1-3/8
ULD-88-22
5/16
OD
APPLICATIONS:
A liner for cast-in-place or potted installation, used to hold SF
renewable drill bushings. Un-A-Lok liners incorporate a special locking tab that eliminates the need for a lockscrew.
Holds only the slip side of an SF bushing, not the fixed
side. Diamond-knurled OD provides superior holding strength
against both rotational and axial forces. Since the bushings
OD is not ground, keep the ID accurately located during casting or potting to ensure accuracy in the finished tool.
METRIC
ID
(G6)
LENGTH
OD
8mm
10mm ULDM-12-10 Contact

12mm
12.65-12.25mm 16mm ULDM-12-16 Factory
10mm
Contact
15mm
20mm ULDM-15-20
Factory
15.65-15.25mm
12mm
12mm
15mm
Standard metric liner bushing
18mm
25mm
ULDM-15-25
12mm
ULDM-18-12
25mm
ULDM-18-25
16mm
ULDM-22-16
22mm
Factory
22.65-22.25mm
36mm
ULDM-22-36
16mm
ULDM-26-16
26mm
Factory
26.90-26.25mm
36mm
46BU
+.0001/+.0004
+.0002/+.0005
+.0003/+.0006
+.0004/+.0007
8 to 10mm
+.005/+.014mm
12 to 18mm
+.006/+.017mm
(G6 tolerance)
ULDM-26-36
QUANTITY DISCOUNTS

3/16 to 5/16"
1/2"
3/4"
1"
ULDM-15-12
Contact
18mm
20mm ULDM-18-20
Factory
18.65-18.25mm
ORDERING EXAMPLES:
ULD-20-5
ULDM-12-10
PRICE
1-5
PART NO.
Quantity
Discount %
Multiplier
1
-5
Net
1.00
6
-11
18%
.82
12
-23
29%
.71
24
-49
34%
.66
50
-99
42%
.58
100
-199
48%
.52
200
-499
50%
.50
500
Up
52%
.48
(2-04)
EZ
EZ-CAST LINER
OD
5/16
.3126-.3129
1/2
.525-.510
LENGTH
OD
ID
1/2
.5002-.5005
LENGTH
3/4
.775-.760
APPLICATIONS:
Another liner for cast-in-place or potted installation, used to
hold SF renewable drill bushings. Unlike diamond-knurl unilock liners, EZ-cast liners hold either the slip or fixed side
of an SF bushing, since they include an integral lockscrew
holder. Diamond-knurled OD provides superior holding
strength against both rotational and axial forces. Since the
bushings OD is not ground, keep the ID accurately located
during casting or potting to ensure accuracy in the finished
tool.
3/4
.7503-.7506
1
1.0004-1.0007
1
1.035-1.010
1-3/8
1.410-1.385
PART NO.
1/2
EZ-32-8
3/4
EZ-32-12
EZ-32-16
1/2
EZ-48-8
3/4
EZ-48-12
EZ-48-16
1-3/8
EZ-48-22
1/2
EZ-64-8
3/4
EZ-64-12
EZ-64-16
1-3/8
EZ-64-22
3/4
EZ-88-12
EZ-88-16
1-3/8
EZ-88-22
PRICE
1-5
ID
ORDERING EXAMPLE:
EZ-32-8
QUANTITY DISCOUNTS

5/16"
1/2"
3/4"
1"
+.0001/+.0004
+.0002/+.0005
+.0003/+.0006
+.0004/+.0007
Quantity
Discount %
Multiplier
1
-5
Net
1.00
6
-11
18%
.82
12
-23
29%
.71
24
-49
34%
.66
50
-99
42%
.58
100
-199
48%
.52
200
-499
50%
.50
500
Up
52%
.48
Handy Reference Books

Jig & Fixture Handbook
430 pages
Completely illustrated
Hardbound manual
Step-by-step instructions
Handy reference charts
-
Decimals and fractions

Units of measure
Trigonometry calculations
Much more!
Modular Fixturing Handbook

216 pages
Step-by-step building
Includes chart of break-even
calculations
Checklist helps you avoid
problems caused by missing
important steps in building
Illustrated examples
Jig & Fixture Handbook: $19.95 Modular Fixturing Handbook: $12.00 Order online at www.carrlane.com/books
(7/01)
47BU
TB
TEMPLATE
INSTALLATION STEPS
1. LAY OUT HOLES
INSTALLATION
TOOL
TRIM
EDGE
RETAINER
RING
When laying out holes, observe the minimum hole spacing and
edge distance listed below:
BUSHING
A
B
OD
MINIMUM
MINIMUM
3/8
.60
.250
1/2
.73
.312
3/4
.98
.438
2. REAM AND COUNTERSINK

REAMED HOLES .001
TO .003 LARGER
THAN OD OF
BUSHING
TEMPLATE
FACE
TEMPLATE
BUSHING
90
APPLICATIONS:
An economical bushing designed for thin template jig plates
from 1/16- to 3/8-inch thick. Bushings are held in place by a
retainer ring. The OD serrations prevent the bushing from
spinning. Bushings can be removed and reused by breaking
the aluminum retainer ring (extra retainer rings available).
Bushing
Retainer
Ring
BUSHING
TEMPLATE
BASE
FLUSH TO
.015
Ream hole .001 to .003 larger than bushing OD. Countersink
reamed hole to allow the bushing to seat .015 below flush with
surface. For best results, use a piloted countersink tool so that
the countersink is concentric and free of chatter marks.
3. INSTALL
ORDERING EXAMPLES:
TB-24-6-4-.1250-TR-10 Bushing for 1/8" drill and 1/16"-thick
template
TB-24-6-4-.1250-TR-30 Bushing for 1/8" drill and 1/8"-thick
template
TB-24-6-4-.1250
Bushing only for 1/8" drill (if rings
are ordered separately)
#55 to 1/2"
+.0001/+.0011
1.30 to 12mm
CONCENTRICITY:
+.002/+.030mm
TOP SURFACE OF
RETAINER RING
DRILL
ENTRANCE
+.005
PARALLEL
TOP EDGE OF
BUSHING GROOVE
TEMPLATE
FACE
-.010
TEMPLATE
BASE
BUSHING CHAMFER
MUST SEAT HERE
Install Retainer Ring with an arbor press whenever possible.

The Installation Tool is also tapped for mounting on a rivet gun
or other impact tool. Check that Retainer Ring top surface is
within +.005 / -.010 of the bushing grooves top edge before
installing.
ID concentric with OD to within .002 TIR
48BU
(4/07)
TB
TEMPLATE
TEMPLATE BUSHINGS WITH RETAINER RINGS

ID
RANGE
A
OD
B
LGTH.
C
GRIP
D
TR-10
TR-20
TR-30
5/16 TB-24-6-5 TR-10
TR-30
5/16 TB-24-8-5 TR-10
TR-30
3/8 TB-24-8-6 TR-10
TR-30
7/16 TB-24-8-7 TR-10
TR-30
TR-40
1/4 TB-32-6-4 TR-50
TR-60
TR-40
5/16 TB-32-6-5
TR-60
TR-40
5/16 TB-32-8-5
TR-60
TR-40
3/8 TB-32-8-6
TR-60
TR-40
7/16 TB-32-8-7
TR-60
TR-40
1/2 TB-32-10-8
TR-60
TR-70
1/4 TB-48-6-4 TR-80
TR-90
TR-70
5/16 TB-48-6-5
TR-90
TR-70
5/16 TB-48-8-5
TR-90
TR-70
3/8 TB-48-8-6
TR-90
TR-70
7/16 TB-48-8-7
TR-90
TR-70
1/2 TB-48-10-8
TR-90
1/4
3/8
.0520-.1960
#55-#9
1.30-5.00mm
3/8
1/2
.1960-.3160
#9-O
5.00-8.00mm
+.002
+.005
MED. SERRATION
B
-.001
B-.002
1/2
RADIUS
5/8
+.000
.010
C
.025
.030
1/2
D
B+.062
3/8
.050
.055
.3125-.5000
5/16-1/2
8.00-12.00mm
3/4
1/2
5/8
PRICE
1/16
3/32
1/8
1/8
3/16
1/8
3/16
3/16
1/4
1/4
5/16
1/16
3/32
1/8
1/8
3/16
1/8
3/16
3/16
1/4
1/4
5/16
5/16
3/8
1/16
3/32
1/8
1/8
3/16
1/8
3/16
3/16
1/4
1/4
5/16
5/16
3/8
TB-24-6-4
3/8
BUSHING RETAINER
TEMPLATE
PART
RING
THICKNESS
NO.
PART NO.
EXTRA RETAINER RINGS

+.000
H
.005
.005
CHAMFER
.010
BOTH ENDS
ID & OD
+.000
.003
+.003
.000
PART
NO.
TR-10
TR-20
TR-30
TR-40
TR-50
TR-60
TR-70
TR-80
TR-90
F
ID
G
OD
.375
.468
.500
.593
.750 .843
PRICE
.205
.173
.142
.205
.173
.142
.205
.173
.142
.82
.78
.91
.86 web
.80 .77
.84catalog
.72
.75
.70
Please see our

for pricing.
1.15
1.09
1.06
1.01
.98
INSTALLATION TOOLS
L
LENGTH
(4/07)
J HEX
5/16-24
TAP
PART
NO.
FOR
BUSHING
SERIES
TBT-100
TBT-200
TBT-300
TB-24
TB-32
TB-48
FOR
RING
SERIES
TR-10,TR-20,TR-30 5/8
TR-40,TR-50,TR-60 3/4
TR-70,TR-80,TR-90 1
NET
PRICE
COMPLETE SET
PART
NET
NO.
PRICE
1 See our
See our
web TBT-400 web
1
catalog
catalog
1
49BU
TTB THREADED TEMPLATE

STANDARD ID TOLERANCE:
From #55 to 1/2"
+.0001/+.0015
(ID concentric with OD to within .002" TIR)
INSTALLATION:
Retainer Ring
Drill hole in jig plate to nominal bushing OD (B diameter).

Countersink 90 to allow bushing to seat flush to .015 below
surface of plate (standard version only, not flanged version).
Install and tighten Retainer Ring to secure. To make Retainer
Ring installation easier, we offer a handy Socket-Type
Installation Tool that fits 1/4 square drives.
Threaded
Template Bushing
NEW
APPLICATIONS:
This economical bushing is designed for thin template jig
plates from 3/64 to 3/8" thick. Bushings are held in place by a
threaded Retainer Ring (order separately). Left-hand thread is
self tightening during drilling to prevent the Retainer Ring from
loosening. Flush contact of the Retainer Ring against the jig
plate ensures perpendicular drill alignment. OD serrations prevent the bushing from rotating during drilling. Choose standard
countersunk type for flush mounting, or flanged type for installation without countersinking the jig plate. Threaded Template
Bushings can be easily removed to replace or reuse.
ORDERING EXAMPLES:
Available in 3/8", 1/2", 5/8, 3/4, and 1" OD sizes. The prices
shown apply to standard bushings only, with any standard
USA or metric ID size within the stated range.
TTB-24-.1250 Bushing with 1/8" ID
TTR-24-3
Matching Retainer Ring for
1/4" thick template
THREADED TEMPLATE BUSHINGS STANDARD

(ORDER BUSHING AND RETAINER RING SEPARATELY)
A
ID RANGE
.0520-.1960
#55-#9
1.30-5.00mm
.1960-.3160
#9-0
5.00-8.00mm
.3125-.4375
5/16-7/16
7.90-11.00mm
.3125-.5312
5/16-17/32
8.00-13.00mm
.5000-.7656
1/2-49/64
13.00-19.00mm
50BU
B
OD
C
LENGTH
D
DIA
G
DIA
3/8
1/2
.475
3/8-24
LH
1/2
1/2
1/2
.600
1/2-20
LH
5/8
5/8
1/2
.725
5/8-18
LH
3/4
3/4
1/2
.850
3/4-16
LH
1/2
1.100
1-14
LH
1-1/4
3/8
5/16
3/16
3/8
5/16
3/16
3/8
5/16
3/16
3/8
5/16
3/16
3/8
5/16
3/16
BUSHING
PART NO.
TTB-24
TTB-32
TTB-40
TTB-48
TTB-64
RETAINER
RING
TEMPLATE
PART NO. THICKNESS
TTR-24-6
TTR-24-5
TTR-24-3
TTR-32-6
TTR-32-5
TTR-32-3
TTR-40-6
TTR-40-5
TTR-40-3
TTR-48-6
TTR-48-5
TTR-48-3
TTR-64-6
TTR-64-5
TTR-64-3
3/64-1/8
9/64-3/16
13/64-3/8
3/64-1/8
9/64-3/16
13/64-3/8
3/64-1/8
9/64-3/16
13/64-3/8
3/64-1/8
9/64-3/16
13/64-3/8
3/64-1/8
9/64-3/16
13/64-3/8
PRICE
Please
see our
web
catalog
for pricing
(6/09)
THREADED TEMPLATE
TTB
Choose standard countersunk type for flush

mounting, or flanged type for installation without
countersinking the jig plate.
THREADED TEMPLATE BUSHES FLANGED

(ORDER BUSH AND RETAINER RING SEPERATELY)
A
ID RANGE
.0520-.1960
#55-#9
1.30-5.00mm
.1960-.3160
#9-0
5.00-8.00mm
.3125-.4375
5/16-7/16
7.90-11.00mm
.3125-.5312
5/16-17/32
8.00-13.00mm
.5000-.7656
1/2-49/64
13.00-19.00mm
B
OD
C
LENGTH
D
DIA
G
DIA
3/8
1/2
.475
3/8-24
LH
1/2
1/2
1/2
.600
1/2-20
LH
5/8
5/8
1/2
.725
5/8-18
LH
3/4
3/4
1/2
.850
3/4-16
LH
5/8
1.100
1-14
LH
1-1/4
3/8
5/16
3/16
3/8
5/16
3/16
3/8
5/16
3/16
3/8
5/16
3/16
3/8
5/16
3/16
BUSH
PART NO.
TTBF-24
TTBF-32
TTBF-40
TTBF-48
TTBF-64
RETAINER
TEMPLATE
RING
PART NO. THICKNESS
TTR-24-6
TTR-24-5
TTR-24-3
TTR-32-6
TTR-32-5
TTR-32-3
TTR-40-6
TTR-40-5
TTR-40-3
TTR-48-6
TTR-48-5
TTR-48-3
TTR-64-6
TTR-64-5
TTR-64-3
3/64-1/8
9/64-3/16
13/64-3/8
3/64-1/8
9/64-3/16
13/64-3/8
3/64-1/8
9/64-3/16
13/64-3/8
3/64-1/8
9/64-3/16
13/64-3/8
3/64-1/8
9/64-3/16
13/64-3/8
PRICE
Please
see our
web
catalog
for pricing
SOCKET-TYPE INSTALLATION TOOLS

PART NO.
TTBT-24
TTBT-32
TTBT-40
TTBT-48
TTBT-64
(6/09)
FOR INSTALLING RETAINER RINGS
TTR-24-3
TTR-32-3
TTR-40-3
TTR-48-3
TTR-64-3
TTR-24-5
TTR-32-5
TTR-40-5
TTR-48-5
TTR-64-5
TTR-24-6
TTR-32-6
TTR-40-6
TTR-48-6
TTR-64-6
51BU
CB
CIRCUIT BOARD
APPLICATIONS:
Headless and head-type bushings made especially for circuit-board drilling machines. Available for Electro-Mechano,
Excellon, Waco, Digital, Nationwide, Edlund, Tektronix,
Leland-Gifford, Palomar, Hughes, Rapidrill, and Reliable
drilling machines.
CB-1
FOR
ELECTROMECHANO
CB-2
ORDERING EXAMPLES:
CB-1-.1250
FOR
EXCELLON
AND WACO
1-1/2
A DIA
10
SPECIALS:
Bushings for other types of circuit-board drilling machines,
including Hughes, Rapidrill, and Reliable, are available on
request. Please contact factory.
STANDARD ID TOLERANCE:
#80 to 1/4
Nominal +.0001/+.0004
CONCENTRICITY:
COUNTERBORE:
1/8 - #80 TO
3/32 ID
3/16 - #41 TO
11/64 ID
B
C 5/16
1-1/2
A DIA
Standard drill bearing length is 1-1/2 times drill size on all

types and sizes.
.2516
.2513
.3749
.3747
B
.031
CB-3
FOR
DIGITAL
3/16
.032R
.093
A
1-1/2
A DIA
.43
.422
.417
CB-4
FOR
NATIONWIDE
17
.094
.091
TYP.
3/16
1-1/2
A DIA
CB-5
FOR
EDLUND
AND
TEKTRONIX
C .343
.093
A
.3125
.3123
ID concentric with OD to within .0005 TIR maximum at drill

exit end.
DRILL BEARING LENGTH:
C 1/2
5/32 - #80 TO #41 ID

3/16 - #40 TO 11/64 ID
Bushing for 1/8" drill

standard drill size within the stated ID range. See back
cover.
.3125
.3123
B
3/16
.286
.281
46
.355
.345
.191
.190
.500
.490
.255
C .245
A
B
.3766
.3763
.500
Great works are

performed not by
strength but by
perseverance.
CB-6
FOR
LELANDGIFFORD
.160
.152
.375
46
.313
C .308
A
1-1/2
A DIA
7/32
CB-7
.4232
.4228
.3750
.3748
1-1/2
A DIA
FOR
PALOMAR
C .500
A
.124
.122
52BU
+.000
.010
.749
.746
(5-08)
CIRCUIT BOARD
TYPE
CB-1
TYPE
CB-2
TYPE
CB-3
TYPE
CB-4
TYPE
CB-5
TYPE
CB-6
TYPE
CB-7
(5-08)
ID RANGE
DRILL SIZE A
#80-#78
#77-#70
#69-3/64
#55-1/16
#52-3/32
#41-9/64
.0135-.0179
.0180-.0291
.0292-.0519
.0520-.0634
.0635-.0959
.0960-.1406
ID RANGE
DRILL SIZE A
#80-#79
1/64-#75
#74-1/32
#67-3/64
#55-#41
#40-9/64
.0135-.0155
.0156-.0224
.0225-.0319
.0320-.0519
.0520-.0979
.0980-.1406
ID RANGE
DRILL SIZE A
#80-#78
#77-#70
#69-3/64
#55-1/16
#52-3/32
#41-9/64
.0135-.0179
.0180-.0291
.0292-.0519
.0520-.0634
.0635-.0959
.0960-.1406
ID RANGE
DRILL SIZE A
#80-#78
#77-#70
#69-3/64
#55-1/16
#52-3/32
#41-9/64
.0135-.0179
.0180-.0291
.0292-.0519
.0520-.0634
.0635-.0959
.0960-.1406
ID RANGE
DRILL SIZE A
#80-#78
#77-#70
#69-3/64
#55-1/16
#52-3/32
#41-9/64
.0135-.0179
.0180-.0291
.0292-.0519
.0520-.0634
.0635-.0959
.0960-.1406
ID RANGE
DRILL SIZE A
#80-#78
#77-#70
#69-3/64
#55-1/16
#52-3/32
#41-9/64
.0135-.0179
.0180-.0291
.0292-.0519
.0520-.0634
.0635-.0959
.0960-.1406
ID RANGE
DRILL SIZE A
#80-#78
#77-#70
#69-3/64
#55-1/16
#52-3/32
#41-9/64
.0135-.0179
.0180-.0291
.0292-.0519
.0520-.0634
.0635-.0959
.0960-.1406
CB
PRICE
Contact
Factory
PRICE
Contact
Factory
PRICE
Contact
Factory
PRICE
Contact
Factory
PRICE
Contact
Factory
PRICE
Contact
Factory
PRICE
Contact
Factory
53BU
GD
GUN DRILL
TYPE GDL
GUN-DRILL LINER
A
ID
C
LGTH
B
OD
PART NO.
1/8
GDL-64-16-13
5/32
GDL-64-16-16
7/32
GDL-64-16-20
1/2
11/32
GDL-64-16-32
3/4
9/16
GDL-64-16-48
13/64
1/8
GDL-88-22-13
1/4
5/32
GDL-88-22-16
7/32
GDL-88-22-20
11/32
GDL-88-22-32
3/4
9/16
GDL-88-22-48
51/64
GDL-88-22-64
13/64
1/8
GDL-112-28-13
1/4
5/32
GDL-112-28-16
5/16
7/32
GDL-112-28-20
13/64
1/4
PRICE
LOCK
SCREW
1
5/16
BODY
OD
F
DIA
3/16 19/32 35 59/64

3/16 25/32 30 1-7/64
1
30 1-25/64
3/16
LOCK
SCREW
LS-2
LS-2
LS-2
5/16
GUN-DRILL LINER
P. 48
1/2
1-3/8
1.3750-1.3747
1-3/8
GUN DRILL
GUN-DRILL INSERT
P. 49
APPLICATIONS:
1/2
These bushings are for gun-drilling machines, such as

Eldorado, Drillmation, deHoff, and Lahr. Gun-drill bushings are
similar to SF renewable bushings, but with the drill bearing at the
bushings head end. Depending on the gun-drilling machine,
bushings are either one-piece or two-piece (a liner and an
insert).
1-3/4
1.7500-1.7497
LS-2
7/16 1-27/64 3/8

7/16 1-51/64 3/8
3/4 2-19/64 3/8
1
1-3/8
1-3/4
1.0000-.9998
LS-2
1-3/4 11/32 GDL-112-28-32
3/4
9/16
LS-2
GDL-112-28-48
51/64 GDL-112-28-64
1-3/8
1-3/64 GDL-112-28-88
Drill
Workpiece
ORDERING EXAMPLE:
GDL-112-28-20
Liner for any insert with a 5/16 OD

drill size within the stated ID range. See back cover for decimal
equivalents. To price non-standard sizes, see page 7.

13/64"
1/4 to 5/16"
1/2"
3/4 to 1"
1-3/8"
54BU
+.0014/+.0016
+.0015/+.0017
+.0016/+.0018
+.0017/+.0019
+.0021/+.0023
QUANTITY DISCOUNTS
Quantity
Discount %
Multiplier
1
-5
Net
1.00
6
-11
18%
.82
12
-23
29%
.71
24
-49
34%
.66
50
-99
42%
.58
100
-199
48%
.52
200
-499
50%
.50
500
Up
52%
.48
(12/07)
GD
GUN DRILL
TYPE GDI
GUN-DRILL INSERTS
A
ID
GUN DRILL
GUN-DRILL INSERT
P. 49
.0635-.0995
13/64
#52-#39
.2046-.2043
1.65-2.50mm
.0980-.1406
1/4
#40-9/64
.2516-.2513
2.50-3.50mm
.1250-.1935
5/16
1/8-#10
.3141-.3138
3.20-4.90mm
.1875-.3160
1/2
3/16-O
.5017-.5014
4.80-8.00mm
.3125-.5312
3/4
5/16-17/32
.7518-.7515
8.00-13.50mm
.5000-.7656
1
1/2-49/64 1.0018-1.0015
13.00-19.00mm
.6250-1.0312
1-3/8
5/81-1/32
1.3772-1.3768
16.00-26.00mm
C
LGTH
PART NO.
1/2
3/4
1
1/2
3/4
1
1/2
3/4
1
1/2
3/4
1
1/2
3/4
1
GDI-13-8
GDI-13-12
GDI-13-16
GDI-16-8
GDI-16-12
GDI-16-16
GDI-20-8
GDI-20-12
GDI-20-16
GDI-32-8
GDI-32-12
GDI-32-16
GDI-48-8
GDI-48-12
GDI-48-16
3/4
GDI-64-12
GDI-64-16
GDI-88-16
PRICE
GUN-DRILL LINER
P. 48
B
OD
MATCHING
LINER
GDL-64-16-13
GDL-88-22-13
GDL-112-28-13
GDL-64-16-16
GDL-88-22-16
GDL-112-28-16
GDL-64-16-20
GDL-88-22-20
GDL-112-28-20
GDL-64-16-32
GDL-88-22-32
GDL-112-28-32
GDL-64-16-48
GDL-88-22-48
GDL-112-28-48
GDL-88-22-64
GDL-112-28-64
GDL-112-28-88
ORDERING EXAMPLES:
GDI-20-16-.1250
Gun-drill insert for 1-3/4" OD liner

GDL-112-28-20, inch ID
Gun-drill insert for 1-3/4" OD liner
GDL-112-28-20, mm ID
(.1772 = 4.50mm)
GDI-20-16-.1772

drill size within a stated ID range. See back cover for decimal
equivalents. To price non-standard sizes, see page 7.
#52 to 1-1/32"
-.0000/+.0002
1.65 to 26mm
-.000/+.005mm
QUANTITY DISCOUNTS
Quantity
Discount %
Multiplier
CHIP AND
COOLANT
DEFLECTOR
SPINDLE
DRIVER
SOCKET WHIPGUIDES
1
-5
Net
1.00
6
-11
18%
.82
12
-23
29%
.71
24
-49
34%
.66
50
-99
42%
.58
100
-199
48%
.52
200
-499
50%
.50
500
Up
52%
.48
GUN DRILL LINER

CHIP BOX
GUN DRILL INSERT
(12/07)
55BU
GD
GUN DRILL
TYPE GDE
ONE-PIECE ELDORADO TYPE
ID
RANGE
F
DIA
1
1-3/8
1-27/64
1-51/64
3/8
3/8
3/16
3/16
19/32
25/32
35
30
59/64
1-7/64
ORDERING EXAMPLES:
GDE-64-12-.1250
GDE-64-12-.1772
Standard gun-drill bushing, inch ID

Standard gun-drill bushing, mm ID (.1772 = 4.50mm)
1/8 to 1-1/16"
-.0000/+.0002
3 to 27mm
LENGTH PART NO.
.1250-.7812
1
1/8-25/32
1.0000-.9998
3.20-19.50mm
.1250-1.0625
1-3/8
1/8-1-1/16
1.3750-1.3747
3.20-27.00mm
3/4
GDE-64-12
GDE-64-16
1-3/8
GDE-64-22
GDE-88-16
1-3/8
GDE-88-22
PRICE
1-5
Please see our web

BODY
OD
OD
LOCK
SCREW
LS-2
LS-2
-.000/+.005mm
TYPE GDD
ONE-PIECE ELDORADO DEEP TYPE
ID
RANGE
GDD-88-30-.1250
GDD-88-30-.1772

-.0000/+.0002
D
EXT.
PART NO.
1-7/8
1/2
GDD-88-30
GDD-88-38
1-1/2
GDD-88-46
GDD-88-54
.1250-1.0625 1-3/8 2-3/8

1/8-1-1/16 1.37503.20-27.00mm 1.3747 2-7/8
1/8 to 1-1/16"
C
LGTH.
3-3/8
3 to 27mm
PRICE LOCK
1-5
SCREW
Please see our web

ORDERING EXAMPLES:
OD
LS-2
-.000/+.005mm
TYPE GDH
ONE-PIECE DEHOFF TYPE
ID
RANGE
F
DIA
1
1-3/8
1-27/64
1-51/64
3/8
3/8
3/16
3/16
19/32
25/32
35
30
59/64
1-7/64
PART NO.
3/4
GDH-64-12
GDH-64-16
1-3/8
GDH-64-22
.1250-1.0625
1
1-3/8
1/8-1-1/16
3.20-27.00mm 1.3750-1.3747 1-3/8
GDH-88-16
.1250-.7812
1
1/8-25/32 1.0000-.9998
3.20-19.50mm
ORDERING EXAMPLES:
GDH-64-12-.1250
GDH-64-12-.1772

1/8 to 1-1/16"
-.0000/+.0002
3 to 27mm
-.000/+.005mm
56BU
LS-2
LS-2
GDH-88-22
QUANTITY DISCOUNTS
QUANTITY DISCOUNTS FOR ABOVE TYPES

Prices shown here apply to standard bushings only, for a standard drill size
within the stated ID range. See back cover for decimal equivalents. To
price non-standard sizes, see page 7.
PRICE LOCK
SCREW
1-5
Please see our web

BODY
OD
LENGTH
OD
Quantity
Discount %
Multiplier
1
-5
Net
1.00
6
-11
18%
.82
12
-23
29%
.71
24
-49
34%
.66
50
-99
42%
.58
100
-199
48%
.52
200
-499
50%
.50
500
Up
52%
.48
(12/07)
AIR FEED
ADAPTOR TIP ASSEMBLY
To mount air-feed drill, insert in liner and turn

30 counterclockwise to lock.
Collar
Shank
(Press fit
in Collar)
STANDARD AIR-FEED DRILLS
REDUCER
(optional)
p. 68
AIR-FEED-DRILL
NOSEPIECE
SHANK
p. 59-67
COLLAR
p. 59-67
AT-TYPE
ADAPTOR TIP
p. 68
CONTOUR-NOSE
SHANK
p. 58
COOLANT-TYPE AIR-FEED DRILLS
COOLANT
REDUCER
(optional)
p. 68
COOLANT-TYPE
AIR-FEED-DRILL
NOSEPIECE
COOLANT
COLLAR
p. 59-67
COOLANT SHANK
p. 59-67
COOLANT-NOSE
COOLANT SHANK p. 58
MOUNTING OPTIONS
TAPER-LOK
LINERS
p. 69
New-design one-piece lock liner has angular locking surfaces for superior strength.
Allows very close hole spacing. Hold in
place with a lock nut. Also available
knurled for installing in plastic tooling.
(12/07)
LOCK LINERS
p. 69
Conventional lock liner incorporating two lock screws. Hold in
place with a lock nut.
TAPER-LOK
AIR-FEED LOCKSCREWS
p. 71
New-design lock screw especially for
air-feed drills. Angular locking surface
for superior strength. Install two lock
screws and a liner directly in jig plate.
LOCKSCREWS
p. 71
LOCK STRIPS
p. 71
Conventional-style lock screws.

Install two lock screws and a liner
bushing directly in jig plate.
Allows the closest possible hole

spacing. Use together with liner
bushings.
57BU
AIR FEED
ADAPTOR TIP ASSEMBLIES
APPLICATIONS:
Drill-bushing shanks, collars, adaptors, and locking accessories for air-feed drills, tappers, and back-spotfacers.
Available for all standard drill motors, including GardnerDenver, Keller, Aro, Buckeye, Quackenbush, Desoutter, and
Ingersoll-Rand.
Collar
21000
SERIES
Shank
Reducer
CONSTRUCTION:
Adaptor-tip assemblies consist of two pieces: a locking collar and a pressed-in shank. The collar screws into the airfeed-drill nosepiece, precisely aligns the shank, and locks
the drill in place by rotating 30 counterclockwise after
mounting. Shanks and collars can be ordered separately for
replacement purposes.
ORDERING EXAMPLES:
A-21101-.1250
Complete adaptor-tip assembly
21101-.1250
Shank only
21000
Collar only
A-21101-.1250-C Complete assembly with contour nose
21101-.1250-C
Shank only, with contour nose
A-11101-.1250
Coolant-type assembly
A-11101-.1250-C Coolant-type assembly with contour nose
standard drill size within the stated ID range. See back cover
for decimal equivalents. To price non-standard sizes, see
page 7. All prices are net no quantity discount.
From #70 to 1/4"
Over 1/4 to 3/4"
Over 3/4 to 1-1/2"
+.0001/+.0004
+.0001/+.0005
+.0002/+.0006
AT-Type
+.0000/+.0003
(See page 9 for reamer ID tolerances.)
From 1 to 3mm
Over 3 to 6mm
Over 6 to 10mm
Over 10 to 18mm
Over 18 to 30mm
.437
.437
1/64
A
.166 AT START
.176 OF HELIX
.437
C
5/16
1/64
A
B
1-1/2
1.1703 1.00
4 22'
1.1705
HELIX
HOLE IN
ANGLE
COLLAR
SHANK
FOR
SHANK
COLLAR
OPTIONAL CONTOUR NOSE:
58BU
C
5/16
1.922
2"-16 UNEF-2A
L.H. THREAD
2.0610
2.0604
25000
SERIES
COLLAR
.158 AT START
.168 OF HELIX
24000
SERIES
A B
5 53'
HELIX
ANGLE
1-1/4
.9523
1.672 .9525 1.00
5 07'
HELIX
HOLE IN
ANGLE
COLLAR
SHANK
FOR
SHANK
COLLAR
1.5610
1.5604
1/64
A
B
1-1/4-12 UNF-2A
L.H. THREAD
1.3110
1.3104
For coolant-inducing air-feed drills. Special shanks, collars,

and reducers with internal coolant passages. Contact factory for pricing.
5 B
HELIX
ANGLE
SHANK
3/4
1-1/2-12 UNF-2A
L.H. THREAD
Angular-nose shank recommended for close drilling along

sloped or curved surfaces. Available on standard and
coolant-type shanks. To order, add -C suffix to part number. Contact factory for pricing.
C
5/16
.6238 1.00
1.422
.6240
HOLE IN
COLLAR SHANK
FOR
SHANK
23000
SERIES
1/64
A
.166 AT START
.174 OF HELIX
22000
SERIES
+.002/+.008mm
+.004/+.012mm
+.005/+.014mm
+.006/+.017mm
+.007/+.020mm
C
1/4
5/8
1" .4987
3/4
.4989
HOLE IN
.250
COLLAR
FOR
SHANK COLLAR
1-14 NF-2A
L.H. THREAD
1.0610
1.0604
OPTIONAL COOLANT TYPE:
45
.176 AT START
.182 OF HELIX
3/4-16 UNF-2A
L.H. THREAD
41/64
.8110
.8104
.153 AT START
.163 OF HELIX
.437
C
5/16
1/64
A B
1-3/4
2-5/8 1.7188 1.00

5
1.7191
HELIX
HOLE IN
ANGLE
COLLAR
SHANK
FOR
SHANK
COLLAR
(12/07)
AIR FEED
21000 SERIES
A
ID
RANGE
SHANK ONLY
TIP ASSEMBLY
B
OD
.0938-.2500
3/8
3/32-1/4
2.40-6.35mm .3748-.3745
3/8
1/2
5/8
3/4
7/8
1
1-1/16
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
2-1/2
2-3/4
3
3-1/4
6
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
2-1/2
2-3/4
3
3-1/4
3/8
1/2
5/8
3/4
7/8
1
1-1/16
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
2-1/2
2-3/4
3
3-1/4
5
A-21101
A-21102
A-21103
A-21104
A-21105
A-21106
A-16500
A-21108
A-21110
A-21111
A-21113
A-21114
A-21115
A-21116
A-21118
A-21119
A-21120
A-21121
A-21122
A-21124
A-21125
A-21126
A-21131
A-21202
A-21203
A-21204
A-21205
A-21206
A-21208
A-21210
A-21211
A-21213
A-21214
A-21215
A-21216
A-21218
A-21219
A-21220
A-21221
A-21222
A-21224
A-21225
A-21226
A-21301
A-21302
A-21303
A-21304
A-21305
A-21306
A-16501
A-21308
A-21310
A-21311
A-21313
A-21314
A-21315
A-21316
A-21318
A-21319
A-21320
A-21321
A-21322
A-21324
A-21325
A-21326
A-21330
A-11101
A-11102
A-11103
A-11104
A-11105
A-11106
A-11107
A-11108
A-11110
A-11111
A-11113
A-11114
A-11115
A-11116
A-11118
A-11119
A-11120
A-11121
A-11122
A-11124
A-11125
A-11126
A-11131
A-11202
A-11203
A-11204
A-11205
A-11206
A-11208
A-11210
A-11211
A-11213
A-11214
A-11215
A-11216
A-11218
A-11219
A-11220
A-11221
A-11222
A-11224
A-11225
A-11226
A-11301
A-11302
A-11303
A-11304
A-11305
A-11306
A-11307
A-11308
A-11310
A-11311
A-11313
A-11314
A-11315
A-11316
A-11318
A-11319
A-11320
A-11321
A-11322
A-11324
A-11325
A-11326
A-11330
STANDARD STANDARD
TYPE
TYPE
PRICE*
PART NO.
COOLANT
TYPE
PART NO.
21101
21102
21103
21104
21105
21106
16500
21108
21110
21111
21113
21114
21115
21116
21118
21119
21120
21121
21122
21124
21125
21126
21131
21202
21203
21204
21205
21206
21208
21210
21211
21213
21214
21215
21216
21218
21219
21220
21221
21222
21224
21225
21226
21301
21302
21303
21304
21305
21306
16501
21308
21310
21311
21313
21314
21315
21316
21318
21319
21320
21321
21322
21324
21325
21326
21330
11101
11102
11103
11104
11105
11106
11107
11108
11110
11111
11113
11114
11115
11116
11118
11119
11120
11121
11122
11124
11125
11126
11131
11202
11203
11204
11205
11206
11208
11210
11211
11213
11214
11215
11216
11218
11219
11220
11221
11222
11224
11225
11226
11301
11302
11303
11304
11305
11306
11307
11308
11310
11311
11313
11314
11315
11316
11318
11319
11320
11321
11322
11324
11325
11326
11330
COLLAR ONLY
STANDARD STANDARD
TYPE
TYPE
PRICE*
PART NO.
COOLANT STANDARD
TYPE
TYPE
PART NO.
PRICE*
TAPER-LOK
LINER
PART NO.
p. 69
LOCK LINER LOCK NUT

PART NO. PART NO.
p. 69
p. 69
TLL-16520 A-16520
(Matches (Matches
A-21106 A-16500 14441
tip)
tip)
21000 11000
COOLANT
TYPE
PART NO.
.0938-.3750
1/2
3/32-3/8
2.40-9.50mm .4998-.4995
STANDARD
TYPE
PART NO.
.0938-.3125
7/16
3/32-5/16
2.40-7.90mm .4373-.4370
C
LENGTH
TAPER-LOK
LOCKSCREW
PART NO.
p. 71
LOCK
LINER
SCREW
PART NO. PART NO.
p. 71
p. 71
19936
CL-11-AFL
or
CL-13-AFL 16531 19937
or
CL-14-AFL
TLL-16521 A-16521
(Matches (Matches
14442
A-21306 A-16501
tip)
tip)
19938
* Contact factory for pricing on coolant type.
(12/07)
59BU
AIR FEED
22000 SERIES
A
ID
RANGE
SHANK ONLY
TIP ASSEMBLY
B
OD
.1875-.2812
7/16
3/16-9/32 .4373-.4370
4.80-7.10mm
3/8
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
5
6
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
5
6
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
A-22101
A-22102
A-22103
A-22104
A-22105
A-22106
A-22108
A-22110
A-22111
A-22113
A-22114
A-22115
A-22116
A-22118
A-22119
A-22120
A-22121
A-22122
A-22124
A-22125
A-22126
A-22127
A-22128
A-22129
A-22130
A-22131
A-22202
A-22203
A-22204
A-22205
A-22206
A-22208
A-22210
A-22211
A-22213
A-22214
A-22215
A-22216
A-22218
A-22219
A-22220
A-22221
A-22222
A-22224
A-22225
A-22226
A-22227
A-22228
A-22229
A-22230
A-22231
A-22303
A-22304
A-22305
A-22306
A-22308
A-22310
A-22311
A-22313
A-22314
A-22315
A-22316
A-12101
A-12102
A-12103
A-12104
A-12105
A-12106
A-12108
A-12110
A-12111
A-12113
A-12114
A-12115
A-12116
A-12118
A-12119
A-12120
A-12121
A-12122
A-12124
A-12125
A-12126
A-12127
A-12128
A-12129
A-12130
A-12131
A-12202
A-12203
A-12204
A-12205
A-12206
A-12208
A-12210
A-12211
A-12213
A-12214
A-12215
A-12216
A-12218
A-12219
A-12220
A-12221
A-12222
A-12224
A-12225
A-12226
A-12227
A-12228
A-12229
A-12230
A-12231
A-12303
A-12304
A-12305
A-12306
A-12308
A-12310
A-12311
A-12313
A-12314
A-12315
A-12316
STANDARD STANDARD
TYPE
TYPE
PRICE*
PART NO.
COOLANT
TYPE
PART NO.
22101
22102
22103
22104
22105
22106
22108
22110
22111
22113
22114
22115
22116
22118
22119
22120
22121
22122
22124
22125
22126
22127
22128
22129
22130
22131
22202
22203
22204
22205
22206
22208
22210
22211
22213
22214
22215
22216
22218
22219
22220
22221
22222
22224
22225
22226
22227
22228
22229
22230
22231
22303
22304
22305
22306
22308
22310
22311
22313
22314
22315
22316
12101
12102
12103
12104
12105
12106
12108
12110
12111
12113
12114
12115
12116
12118
12119
12120
12121
12122
12124
12125
12126
12127
12128
12129
12130
12131
12202
12203
12204
12205
12206
12208
12210
12211
12213
12214
12215
12216
12218
12219
12220
12221
12222
12224
12225
12226
12227
12228
12229
12230
12231
12303
12304
12305
12306
12308
12310
12311
12313
12314
12315
12316
COLLAR ONLY
STANDARD STANDARD
TYPE
TYPE
PRICE*
PART NO.
COOLANT STANDARD
TYPE
TYPE
PART NO.
PRICE*
TAPER-LOK
LINER
PART NO.
p. 69
LOCK LINER LOCK NUT

PART NO. PART NO.
p. 69
p. 69
TAPER-LOK
LOCKSCREW
PART NO.
p. 71
LOCK
LINER
SCREW
PART NO. PART NO.
p. 71
p. 71
19937
22000 12000
COOLANT
TYPE
PART NO.
.1875-.4062
9/16
3/16-13/32 .5623-.5620
4.80-10.20mm
STANDARD
TYPE
PART NO.
.1875-.3438
1/2
3/16-11/32
4.80-8.70mm .4998-.4995
C
LENGTH
CL-11-AFL
or
CL-13-AFL 16532
or
CL-14-AFL
19938
19939
CONTINUED ON NEXT PAGE.
60BU
(12/07)
AIR FEED
22000 SERIES (CONT.)
A
ID
RANGE
SHANK ONLY
TIP ASSEMBLY
B
OD
C
LENGTH
STANDARD
TYPE
PART NO.
COOLANT
TYPE
PART NO.
2
2-1/8
2-1/4
2-3/8
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
5
6
3/8
1/2
5/8
3/4
7/8
1
1-1/8
1-3/16
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
5
6
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
5
6
A-22318
A-22319
A-22320
A-22321
A-22322
A-22324
A-22325
A-22326
A-22327
A-22328
A-22329
A-22330
A-22331
A-22401
A-22402
A-22403
A-22404
A-22405
A-22406
A-22408
A-16502
A-22410
A-22411
A-22413
A-22414
A-22415
A-22416
A-22418
A-22419
A-22420
A-22421
A-22422
A-22424
A-22425
A-22426
A-22427
A-22428
A-22429
A-22430
A-22431
A-22504
A-22505
A-22506
A-22508
A-22510
A-22511
A-22513
A-22514
A-22515
A-22516
A-22518
A-22519
A-22520
A-22521
A-22522
A-22524
A-22525
A-22526
A-22527
A-22528
A-22529
A-22530
A-22531
A-12318
A-12319
A-12320
A-12321
A-12322
A-12324
A-12325
A-12326
A-12327
A-12328
A-12329
A-12330
A-12331
A-12401
A-12402
A-12403
A-12404
A-12405
A-12406
A-12408
A-12409
A-12410
A-12411
A-12413
A-12414
A-12415
A-12416
A-12418
A-12419
A-12420
A-12421
A-12422
A-12424
A-12425
A-12426
A-12427
A-12428
A-12429
A-12430
A-12431
A-12504
A-12505
A-12506
A-12508
A-12510
A-12511
A-12513
A-12514
A-12515
A-12516
A-12518
A-12519
A-12520
A-12521
A-12522
A-12524
A-12525
A-12526
A-12527
A-12528
A-12529
A-12530
A-12531
STANDARD STANDARD
TYPE
TYPE
PRICE*
PART NO.
COOLANT
TYPE
PART NO.
22318
22319
22320
22321
22322
22324
22325
22326
22327
22328
22329
22330
22331
22401
22402
22403
22404
22405
22406
22408
16502
22410
22411
22413
22414
22415
22416
22418
22419
22420
22421
22422
22424
22425
22426
22427
22428
22429
22430
22431
22504
22505
22506
22508
22510
22511
22513
22514
22515
22516
22518
22519
22520
22521
22522
22524
22525
22526
22527
22528
22529
22530
22531
12318
12319
12320
12321
12322
12324
12325
12326
12327
12328
12329
12330
12331
12401
12402
12403
12404
12405
12406
12408
12409
12410
12411
12413
12414
12415
12416
12418
12419
12420
12421
12422
12424
12425
12426
12427
12428
12429
12430
12431
12504
12505
12506
12508
12510
12511
12513
12514
12515
12516
12518
12519
12520
12521
12522
12524
12525
12526
12527
12528
12529
12530
12531
COLLAR ONLY
STANDARD STANDARD
TYPE
TYPE
PRICE*
PART NO.
COOLANT STANDARD
TYPE
TYPE
PART NO.
PRICE*
TAPER-LOK
LINER
PART NO.
p. 69
LOCK LINER LOCK NUT

PART NO. PART NO.
p. 69
p. 69
TAPER-LOK
LOCKSCREW
PART NO.
p. 71
LOCK
LINER
SCREW
PART NO. PART NO.
p. 71
p. 71
CONTINUED FROM PRECEDING PAGE.
.1875-.4062
9/16
3/16-13/32 .5623-.5620
4.80-10.20mm
22000 12000
.1875-.4688
3/4
3/16-15/32 .7498-.7495
4.80-11.80mm
.1875-.4688
5/8
3/16-15/32 .6248-.6245
4.80-11.80mm
19939
TLL-16522 A-16522
(Matches (Matches
A-22406 A-16502 14443
Tip)
Tip)
19940
CL-11-AFL
or
CL-13-AFL 16532
or
CL-14-AFL
19941
16.98
(12/07)
61BU
AIR FEED
The best thing about the future is that it
comes only one day at a time.
Abraham Lincoln
23000 SERIES
A
ID
RANGE
SHANK ONLY
TIP ASSEMBLY
B
OD
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
5
6
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
5
6
A-23104
A-23105
A-23106
A-23108
A-23110
A-23111
A-23113
A-23114
A-23115
A-23116
A-23118
A-23119
A-23120
A-23121
A-23122
A-23124
A-23125
A-23126
A-23127
A-23128
A-23129
A-23130
A-23131
A-23204
A-23205
A-23206
A-23208
A-23210
A-23211
A-23213
A-23214
A-23215
A-23216
A-23218
A-23219
A-23220
A-23221
A-23222
A-23224
A-23225
A-23226
A-23227
A-23228
A-23229
A-23230
A-23231
A-13104
A-13105
A-13106
A-13108
A-13110
A-13111
A-13113
A-13114
A-13115
A-13116
A-13118
A-13119
A-13120
A-13121
A-13122
A-13124
A-13125
A-13126
A-13127
A-13128
A-13129
A-13130
A-13131
A-13204
A-13205
A-13206
A-13208
A-13210
A-13211
A-13213
A-13214
A-13215
A-13216
A-13218
A-13219
A-13220
A-13221
A-13222
A-13224
A-13225
A-13226
A-13227
A-13228
A-13229
A-13230
A-13231
STANDARD STANDARD
TYPE
TYPE
PRICE*
PART NO.
COOLANT
TYPE
PART NO.
23104
23105
23106
23108
23110
23111
23113
23114
23115
23116
23118
23119
23120
23121
23122
23124
23125
23126
23127
23128
23129
23130
23131
23204
23205
23206
23208
23210
23211
23213
23214
23215
23216
23218
23219
23220
23221
23222
23224
23225
23226
23227
23228
23229
23230
23231
13104
13105
13106
13108
13110
13111
13113
13114
13115
13116
13118
13119
13120
13121
13122
13124
13125
13126
13127
13128
13129
13130
13131
13204
13205
13206
13208
13210
13211
13213
13214
13215
13216
13218
13219
13220
13221
13222
13224
13225
13226
13227
13228
13229
13230
13231
COLLAR ONLY
STANDARD STANDARD
TYPE
TYPE
PRICE*
PART NO.
COOLANT STANDARD
TYPE
TYPE
PART NO.
PRICE*
TAPER-LOK
LINER
PART NO.
p. 69
LOCK LINER LOCK NUT

PART NO. PART NO.
p. 69
p. 69
TAPER-LOK
LOCKSCREW
PART NO.
p. 71
LOCK
LINER
SCREW
PART NO. PART NO.
p. 71
p. 71
19942
23000 13000
COOLANT
TYPE
PART NO.
.2500-.5938
13/16
1/4-19/32 .8123-.8120
6.30-15.00mm
STANDARD
TYPE
PART NO.
.2500-.5312
3/4
1/4-17/32
6.30-13.50mm .7498-.7495
C
LENGTH
CL-11-AFL
or
CL-13-AFL 16532
or
CL-14-AFL
19943
62BU
(12/07)
AIR FEED
A
ID
RANGE
SHANK ONLY
TIP ASSEMBLY
B
OD
C
LENGTH
A-13304
A-13305
A-13306
A-13308
A-13310
A-13311
A-13312
A-13313
A-13314
A-13315
A-13316
A-13318
A-13319
A-13320
A-13321
A-13322
A-13324
A-13325
A-13326
A-13327
A-13328
A-13329
A-13330
A-13331
A-13406
A-13408
A-13410
A-13411
A-13413
A-13414
A-13415
A-13416
A-13418
A-13419
A-13420
A-13421
A-13422
A-13424
A-13425
A-13426
A-13427
A-13428
A-13429
A-13430
A-13431
A-13506
A-13508
A-13510
A-13511
A-13513
A-13514
A-13515
A-13516
A-13517
A-13518
A-13519
A-13520
A-13521
A-13522
A-13524
A-13525
A-13526
A-13527
A-13528
A-13529
A-13530
A-13531
COOLANT
TYPE
PART NO.
23304
23305
23306
23308
23310
23311
16503
23313
23314
23315
23316
23318
23319
23320
23321
23322
23324
23325
23326
23327
23328
23329
23330
23331
23406
23408
23410
23411
23413
23414
23415
23416
23418
23419
23420
23421
23422
23424
23425
23426
23427
23428
23429
23430
23431
23506
23508
23510
23511
23513
23514
23515
23516
16504
23518
23519
23520
23521
23522
23524
23525
23526
23527
23528
23529
23530
23531
13304
13305
13306
13308
13310
13311
13312
13313
13314
13315
13316
13318
13319
13320
13321
13322
13324
13325
13326
13327
13328
13329
13330
13331
13406
13408
13410
13411
13413
13414
13415
13416
13418
13419
13420
13421
13422
13424
13425
13426
13427
13428
13429
13430
13431
13506
13508
13510
13511
13513
13514
13515
13516
13517
13518
13519
13520
13521
13522
13524
13525
13526
13527
13528
13529
13530
13531
COLLAR ONLY
STANDARD STANDARD
TYPE
TYPE
PRICE*
PART NO.
COOLANT STANDARD
TYPE
TYPE
PART NO.
PRICE*
TAPER-LOK
LINER
PART NO.
p. 69
LOCK LINER LOCK NUT

PART NO. PART NO.
p. 69
p. 69
TLL-16523 A-16523
(Matches (Matches 14445
A-23310 A-16504
Tip)
Tip)
23000 13000
A-23304
A-23305
A-23306
A-23308
A-23310
A-23311
A-16503
A-23313
A-23314
A-23315
A-23316
A-23318
A-23319
A-23320
A-23321
A-23322
A-23324
A-23325
A-23326
A-23327
A-23328
A-23329
A-23330
A-23331
A-23406
A-23408
A-23410
A-23411
A-23413
A-23414
A-23415
A-23416
A-23418
A-23419
A-23420
A-23421
A-23422
A-23424
A-23425
A-23426
A-23427
A-23428
A-23429
A-23430
A-23431
A-23506
A-23508
A-23510
A-23511
A-23513
A-23514
A-23515
A-23516
A-16504
A-23518
A-23519
A-23520
A-23521
A-23522
A-23524
A-23525
A-23526
A-23527
A-23528
A-23529
A-23530
A-23531
STANDARD STANDARD
TYPE
TYPE
PRICE*
PART NO.
COOLANT
TYPE
PART NO.
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-7/16
1-1/2
1-5/8
1-3/4
1-7/8
.2500-.6562
2
7/8
1/4-21/32
6.30-16.50mm .8748-.8745 2-1/8
2-1/4
2-3/8
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
5
6
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
.2500-.7188
1
1/4-23/32 .9998-.9995 2-1/8
2-1/4
6.30-18.00mm
2-3/8
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
5
6
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
1-15/16
2
.2500-.7188
1-1/8
2-1/8
5/16-23/32
6.30-18.00mm 1.1248-1.1245 2-1/4
2-3/8
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
5
6
STANDARD
TYPE
PART NO.
TAPER-LOK
LOCKSCREW
PART NO.
p. 71
LOCK
LINER
SCREW
PART NO. PART NO.
p. 71
p. 71
19944
CL-11-AFL
or
CL-13-AFL 16532 19945
or
CL-14-AFL
TTL-16524 A-16524
(Matches (Matches 14446
A-23515 A-16504
Tip)
Tip)
19946
(12/07)
63BU
AIR FEED
Sports do not build character.
They reveal it.
John Wooden
24000 SERIES
A
ID
RANGE
SHANK ONLY
TIP ASSEMBLY
B
OD
.3125-.4062
5/8
5/16-13/32 .6248-.6245
8.00-10.20mm
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
5
6
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
5
6
A-24103
A-24104
A-24105
A-24106
A-24108
A-24110
A-24111
A-24113
A-24114
A-24115
A-24116
A-24118
A-24119
A-24120
A-24121
A-24122
A-24124
A-24125
A-24126
A-24127
A-24128
A-24129
A-24130
A-24131
A-24304
A-24305
A-24306
A-24308
A-24310
A-24311
A-24313
A-24314
A-24315
A-24316
A-24318
A-24319
A-24320
A-24321
A-24322
A-24324
A-24325
A-24326
A-24327
A-24328
A-24329
A-24330
A-24331
A-14103
A-14104
A-14105
A-14106
A-14108
A-14110
A-14111
A-14113
A-14114
A-14115
A-14116
A-14118
A-14119
A-14120
A-14121
A-14122
A-14124
A-14125
A-14126
A-14127
A-14128
A-14129
A-14130
A-14131
A-14304
A-14305
A-14306
A-14308
A-14310
A-14311
A-14313
A-14314
A-14315
A-14316
A-14318
A-14319
A-14320
A-14321
A-14322
A-14324
A-14325
A-14326
A-14327
A-14328
A-14329
A-14330
A-14331
STANDARD STANDARD
TYPE
TYPE
PRICE*
PART NO.
COOLANT
TYPE
PART NO.
24103
24104
24105
24106
24108
24110
24111
24113
24114
24115
24116
24118
24119
24120
24121
24122
24124
24125
24126
24127
24128
24129
24130
24131
24304
24305
24306
24308
24310
24311
24313
24314
24315
24316
24318
24319
24320
24321
24322
24324
24325
24326
24327
24328
24329
24330
24331
14103
14104
14105
14106
14108
14110
14111
14113
14114
14115
14116
14118
14119
14120
14121
14122
14124
14125
14126
14127
14128
14129
14130
14131
14304
14305
14306
14308
14310
14311
14313
14314
14315
14316
14318
14319
14320
14321
14322
14324
14325
14326
14327
14328
14329
14330
14331
COLLAR ONLY
STANDARD STANDARD
TYPE
TYPE
PRICE*
PART NO.
COOLANT STANDARD
TYPE
TYPE
PART NO.
PRICE*
TAPER-LOK
LINER
PART NO.
p. 69
LOCK LINER LOCK NUT

PART NO. PART NO.
p. 69
p. 69
TAPER-LOK
LOCKSCREW
PART NO.
p. 71
LOCK
LINER
SCREW
PART NO. PART NO.
p. 71
p. 71
19947
24000 14000
COOLANT
TYPE
PART NO.
STANDARD
TYPE
PART NO.
.3125-.5312
3/4
5/16-17/32
8.00-13.50mm .7498-.7495
C
LENGTH
CL-11-AFL
or
CL-13-AFL 16532
or
CL-14-AFL
19949
64BU
(12/07)
AIR FEED
A
ID
RANGE
SHANK ONLY
TIP ASSEMBLY
B
OD
C
LENGTH
A-14405
A-14406
A-14408
A-14410
A-14411
A-14413
A-14414
A-14415
A-14416
A-14418
A-14419
A-14420
A-14421
A-14422
A-14424
A-14425
A-14426
A-14427
A-14428
A-14429
A-14430
A-14431
A-14506
A-14508
A-14510
A-14511
A-14513
A-14514
A-14515
A-14516
A-14518
A-14519
A-14520
A-14521
A-14522
A-14524
A-14525
A-14526
A-14527
A-14528
A-14529
A-14530
A-14531
A-14606
A-14608
A-14610
A-14611
A-14613
A-14614
A-14615
A-14616
A-14617
A-14618
A-14619
A-14620
A-14621
A-14622
A-14624
A-14625
A-14626
A-14627
A-14628
A-14629
A-14630
A-14631
COOLANT
TYPE
PART NO.
24405
24406
24408
24410
24411
24413
24414
24415
24416
24418
24419
24420
24421
24422
24424
24425
24426
24427
24428
24429
24430
24431
24506
24508
24510
24511
24513
24514
24515
24516
24518
24519
24520
24521
24522
24524
24525
24526
24527
24528
24529
24530
24531
24606
24608
24610
24611
24613
24614
24615
24616
16505
24618
24619
24620
24621
24622
24624
24625
24626
24627
24628
24629
24630
24631
14405
14406
14408
14410
14411
14413
14414
14415
14416
14418
14419
14420
14421
14422
14424
14425
14426
14427
14428
14429
14430
14431
14506
14508
14510
14511
14513
14514
14515
14516
14518
14519
14520
14521
14522
14524
14525
14526
14527
14528
14529
14530
14531
14606
14608
14610
14611
14613
14614
14615
14616
14617
14618
14619
14620
14621
14622
14624
14625
14626
14627
14628
14629
14630
14631
COLLAR ONLY
STANDARD STANDARD
TYPE
TYPE
PRICE*
PART NO.
COOLANT STANDARD
TYPE
TYPE
PART NO.
PRICE*
TAPER-LOK
LINER
PART NO.
p. 69
LOCK LINER LOCK NUT

PART NO. PART NO.
p. 69
p. 69
TAPER-LOK
LOCKSCREW
PART NO.
p. 71
LOCK
LINER
SCREW
PART NO. PART NO.
p. 71
p. 71
19950
24000 14000
A-24405
A-24406
A-24408
A-24410
A-24411
A-24413
A-24414
A-24415
A-24416
A-24418
A-24419
A-24420
A-24421
A-24422
A-24424
A-24425
A-24426
A-24427
A-24428
A-24429
A-24430
A-24431
A-24506
A-24508
A-24510
A-24511
A-24513
A-24514
A-24515
A-24516
A-24518
A-24519
A-24520
A-24521
A-24522
A-24524
A-24525
A-24526
A-24527
A-24528
A-24529
A-24530
A-24531
A-24606
A-24608
A-24610
A-24611
A-24613
A-24614
A-24615
A-24616
A-16505
A-24618
A-24619
A-24620
A-24621
A-24622
A-24624
A-24625
A-24626
A-24627
A-24628
A-24629
A-24630
A-24631
STANDARD STANDARD
TYPE
TYPE
PRICE*
PART NO.
COOLANT
TYPE
PART NO.
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
.3125-.6562
7/8
2-1/4
5/16-21/32
8.00-16.50mm .8745-.8748 2-3/8
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
5
6
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
.3125-.7812
1
5/16-25/32 .9998-.9995 2-1/4
2-3/8
8.00-19.50mm
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
5
6
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
1-15/16
2
.3125-.9062
1-1/8
5/16-29/32 1.1248-1.1245 2-1/8
2-1/4
8.00-23.00mm
2-3/8
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
5
6
STANDARD
TYPE
PART NO.
CL-11-AFL
or
CL-13-AFL 16532 19951
or
CL-14-AFL
TLL-16525 A-16525
(Matches (Matches
14446
A-24615 A-16505
Tip)
Tip)
19946
(12/07)
65BU
AIR FEED
A
ID
RANGE
SHANK ONLY
TIP ASSEMBLY
B
OD
C
LENGTH
A-14710
A-14711
A-14713
A-14714
A-14715
A-14716
A-14718
A-14719
A-14720
A-14721
A-14722
A-14724
A-14725
A-14726
A-14727
A-14728
A-14729
A-14730
A-14731
A-14806
A-14811
A-14813
A-14814
A-14815
A-14816
A-14817
A-14818
A-14819
A-14820
A-14821
A-14822
A-14824
A-14825
A-14826
A-14827
A-14828
A-14829
A-14830
A-14831
COOLANT
TYPE
PART NO.
24710
24711
24713
24714
24715
24716
24718
24719
24720
24721
24722
24724
24725
24726
24727
24728
24729
24730
24731
24806
24811
24813
24814
24815
24816
16506
24818
24819
24820
24821
24822
24824
24825
24826
24827
24828
24829
24830
24831
14710
14711
14713
14714
14715
14716
14718
14719
14720
14721
14722
14724
14725
14726
14727
14728
14729
14730
14731
14806
14811
14813
14814
14815
14816
14817
14818
14819
14820
14821
14822
14824
14825
14826
14827
14828
14829
14830
14831
32.56
32.56
32.56
32.56
32.56
24000 14000
TAPER-LOK
LINER
PART NO.
p. 69
LOCK LINER LOCK NUT

PART NO. PART NO.
p. 69
p. 69
TAPER-LOK
LOCKSCREW
PART NO.
p. 71
LOCK
LINER
SCREW
PART NO. PART NO.
p. 71
p. 71
19952
CL-11-AFL
or
CL-13-AFL 16532
or
CL-14-AFL
TLL-16526 A-16526
(Matches (Matches
A-24815 A-16506 14447
Tip)
Tip)
25000 SERIES
25110
25111
25113
25114
25115
25116
25118
25119
25120
25121
25122
25124
25125
25126
25127
25128
25129
25130
25211
15110
15111
15113
15114
15115
15116
15118
15119
15120
15121
15122
15124
15125
15126
15127
15128
15129
15130
15131
25000 15000
See our web catalog for pricing.
A-15110
A-15111
A-15113
A-15114
A-15115
A-15116
A-15118
A-15119
A-15120
A-15121
A-15122
A-15124
A-15125
A-15126
A-15127
A-15128
A-15129
A-15130
A-15131
COOLANT STANDARD
TYPE
TYPE
PART NO.
PRICE*
16.98
16.98
16.98
16.98
16.98
A-25110
A-25111
A-25113
A-25114
A-25115
A-25116
A-25118
A-25119
A-25120
A-25121
A-25122
A-25124
A-25125
A-25126
A-25127
A-25128
A-25129
A-25130
A-25131
.3750-1.0312
1-1/4
3/8-1-1/32
9.50-26.00mm 1.2498-1.2495
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
5
6
COLLAR ONLY
STANDARD STANDARD
TYPE
TYPE
PRICE*
PART NO.
A-24710
A-24711
A-24713
A-24714
A-24715
A-24716
A-24718
A-24719
A-24720
A-24721
A-24722
A-24724
A-24725
A-24726
A-24727
A-24728
A-24729
A-24730
A-24731
A-24806
A-24811
A-24813
A-24814
A-24815
A-24816
A-16506
A-24818
A-24819
A-24820
A-24821
A-24822
A-24824
A-24825
A-24826
A-24827
A-24828
A-24829
A-24830
A-24831
STANDARD STANDARD
TYPE
TYPE
PRICE*
PART NO.
COOLANT
TYPE
PART NO.
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
2-1/4
.3125-.9375
1-1/4
2-3/8
5/16-15/16
8.00-23.50mm 1.2498-1.2495 2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
5
6
1
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
1-15/16
2
2-1/8
.3125-.9375
2-1/4
1-1/2
5/16-15/16
8.00-23.50mm 1.4998-1.4995 2-3/8
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
5
6
STANDARD
TYPE
PART NO.
CL-12-AFL 16530 19953
66BU
(12/07)
AIR FEED
A
ID
RANGE
SHANK ONLY
TIP ASSEMBLY
B
OD
.3750-1.1562
1-3/8
3/8-1-5/32 1.3748-1.3745
9.50-29.00mm
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
5
6
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
5
6
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
5
6
2
2-5/8
2-3/4
3
3-1/4
3-1/2
3-3/4
4
5
6
A-25211
A-25213
A-25214
A-25215
A-25216
A-25218
A-25219
A-25220
A-25221
A-25222
A-25224
A-25225
A-25226
A-25227
A-25228
A-25229
A-25230
A-25231
A-25313
A-25314
A-25315
A-25316
A-25318
A-25319
A-25320
A-25321
A-25322
A-25324
A-25325
A-25326
A-25327
A-25328
A-25329
A-25330
A-25331
A-25415
A-25416
A-25418
A-25419
A-25420
A-25421
A-25422
A-25424
A-25425
A-25426
A-25427
A-25428
A-25429
A-25430
A-25431
A-25518
A-16513
A-25524
A-25525
A-25526
A-25527
A-25528
A-25529
A-25530
A-25531
A-15211
A-15213
A-15214
A-15215
A-15216
A-15218
A-15219
A-15220
A-15221
A-15222
A-15224
A-15225
A-15226
A-15227
A-15228
A-15229
A-15230
A-15231
A-15313
A-15314
A-15315
A-15316
A-15318
A-15319
A-15320
A-15321
A-15322
A-15324
A-15325
A-15326
A-15327
A-15328
A-15329
A-15330
A-15331
A-15415
A-15416
A-15418
A-15419
A-15420
A-15421
A-15422
A-15424
A-15425
A-15426
A-15427
A-15428
A-15429
A-15430
A-15431
A-15518
A-15523
A-15524
A-15525
A-15526
A-15527
A-15528
A-15529
A-15530
A-15531
STANDARD STANDARD
TYPE
TYPE
PRICE*
PART NO.
COOLANT
TYPE
PART NO.
25213
25214
25215
25216
25218
25219
25220
25221
25222
25224
25225
25226
25227
25228
25229
25230
25231
25313
25314
25315
25316
25318
25319
25320
25321
25322
25324
25325
25326
25327
25328
25329
25330
25331
25415
25416
25418
25419
25420
25421
25422
25424
25425
25426
25427
25428
25429
25430
25431
25518
16513
25524
25525
25526
25527
25528
25529
25530
25531
15211
15213
15214
15215
15216
15218
15219
15220
15221
15222
15224
15225
15226
15227
15228
15229
15230
15231
15313
15314
15315
15316
15318
15319
15320
15321
15322
15324
15325
15326
15327
15328
15329
15330
15331
15415
15416
15418
15419
15420
15421
15422
15424
15425
15426
15427
15428
15429
15430
15431
15518
15523
15524
15525
15526
15527
15528
15529
15530
15531
COLLAR ONLY
STANDARD STANDARD
TYPE
TYPE
PRICE*
PART NO.
COOLANT STANDARD
TYPE
TYPE
PART NO.
PRICE*
TAPER-LOK
LINER
PART NO.
p. 69
LOCK LINER LOCK NUT

PART NO. PART NO.
p. 69
p. 69
TAPER-LOK
LOCKSCREW
PART NO.
p. 71
LOCK
LINER
SCREW
PART NO. PART NO.
p. 71
p. 71
19954
25000 15000
.3750-1.4688
2
3/8-1-15/32 1.9998-1.9995
9.50-37.00mm
COOLANT
TYPE
PART NO.
.3750-1.4688
1-3/4
3/8-1-15/32 1.7498-1.7495
9.50-37.00mm
STANDARD
TYPE
PART NO.
.3750-1.2812
1-1/2
3/8-1-9/32 1.4998-1.4995
9.50-32.00mm
C
LENGTH
19955
CL-12-AFL 16530
19956
A-16533
(Matches
14448
A-16513
Tip)
(12/07)
67BU
AIR FEED
AT-TYPE ONE-PIECE ADAPTER TIPS
AUTOMATIC FEED
DRILL MOTOR
ADAPTER TIP
LOCK LINER
LAMINATED
FIBERGLASS
EPOXY POTTING
COMPOUND
ADAPTER TIP
A B
AT-series adapter tips are one-piece adapters
primarily for fiberglass and plastic tooling.
They are used with AT-series knurled liners,
and are not compatible with any other liners or
air-feed accessories. AT-series bushings are
available in 3/4-16 and 1"-14 mountingthread sizes, in a total of four OD sizes, to fit
drill diameters from .1910" to .6250".
L.H. THREAD
AT-TYPE ADAPTER TIPS

PART
NO.
A
ID
RANGE
B
OD
AT-1
.1910-.2055
11/32
#11-#5
.3437-.3435
AT-2
.1910-.2850
7/16
#11-9/32 .4375-.4373
AT-3
.2810-.4130
9/16
K-Z
.5625-.5623
AT-4
.2810-.6250
3/4
K-5/8
.7500-.7498
2-7/16
1-9/16
LIST & QUANTITY PRICES
L.H.
THREAD
1-3
3/4-16
4-6
7-12
13-24 25-49
Please see our web

1-14
D
B A
F
A
LOCK LINER
AT-TYPE LOCK LINERS
Precision knurled liner bushing for mounting
air-feed drills in fiberglass or plastic tooling.
AT-series knurled lock liners are designed
especially for AT-series one-piece adapter
tips, and are not compatible with any other
liners or air-feed accessories. Press-fit ATseries liners are available as specials.
Available in four sizes.
68BU
PART
NO.
A
ID
B
OD
LL-1
11/32
9/16
.3440-.3443
LL-2
7/16
11/16
.4377-.4380
LL-3
9/16
13/16
.5627-.5630
LL-4
3/4
.7503-.7506
F
DIA
LIST & QUANTITY PRICES

1-6
7-12
13-24
25-49
50-99 100-199 200-499 500-999
11/16
13/16
1-3/8 7/8
15/16
Please see our web

1-1/8
(12/07)
AIR FEED
FF
MOUNTING DIMENSIONS
FOR LOCKSCREWS AND LOCK STRIPS
E
E
D
D
DIMENSION
D
E
F
21000
23000
25000
22000
24000
SERIES SERIES SERIES SERIES SERIES
.312
.734
.609
.859
1.047
1.562
.922
1.172
.625
.687
1.109
.984
1.234
TAPER-LOK
AIR-FEED LOCKSCREWS
A DIA.
B DIA.
.165
D
E
7 .385
1-1/2 RAD
PART NO.
CL-9-AFL
CL-11-AFL
CL-13-AFL
CL-14-AFL
CL-10-AFL
CL-12-AFL
MOUNTING
SCREW
DIA
MOUNTING
SCREW
REPLACES
STANDARD PRICE
EACH
LOCKSCREW
2.13
19/32
16531 & 16532 2.16
5/8 19/32 3/16
1-3/32 3/4
2.42
1-19/32 1-1/4
2.42
2.13
3/4 23/32 7/32
19/32
16530
2.16
A
B
DIA DIA
Not Furnished
5/16-18x1.00
5/16-18x1.50 w/Jam Nut
5/16-18x2.00 w/Jam Nut
Not Furnished
3/8-16x1.00
5/16
3/8
LOCKSCREWS
LINERS
5/8
7/16
3/4
5/16
7/16
5/8
19936
19937
19938
19939
19940
19947
19941
19942
19949
19943
19944
19950
19945
19951
19946
19952
19953
19954
19955
19956
B
PRICE
THREAD EACH
5/16-18
3/8-16
.66
A
ID
3/8
7/16
1/2
9/16
5/8
3/4
B
OD
5/8
3/4
7/8
13/16
7/8
1-3/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-3/4
C
PRICE
LENGTH EACH
7.11
1
1
1
8.85
1-3/4
1
1-3/8
1-3/4
11.61
9.01
9.71
11.96
1-3/8
14.73
1-3/4
1-3/8
1-3/4
17.46
14.73
17.46
1-3/4
18.89
2-1/2
24.78
2-1/2
29.45
1-3/4
2-1/4
7.81
Please See our web catalog for pricing.
3/8
See our
website
for pricing.
16531
16532
16530
B
DIA
PART NO.
A
DIA
Please See our

web catalog
for pricing.
Angular locking surface mates perfectly with

air-feed collars. Use instead of standard lockscrews for greater strength . . . eliminates
worn, bent, or broken lockscrews caused by
point contact. Serrations at bottom bite into
the fixture plate to positively prevent rotation
under heavy torque loads. Alloy steel mounting screws furnished. Patent No. 3,336,822.
PART NO.
11/32
JAM NUT FURNISHED

ON SOME SIZES
LOCK STRIPS
3/8
.125
(6/05)
3/8
C
L
1-1/2 1-1/2
17/64 DRILL THRU
L
PART NO. OVERALL NO. OF
LENGTH HOLES
4
LSM-12
12
8
LSM-24
24
12
LSM-36
36
PRICE
EACH
20.24
24.31
33.48
See our
website
for pricing.
.187
.192
3/4
69BU
AIR FEED
TAPER-LOK LINERS
Precision liner bushing for mounting air-feed drills through a jig plate. One-piece design has two angled locking surfaces
to lock the drill motor in place, for superior strength. Milled flats allow close hole spacing. Press fit into jig plate, then
fasten from behind with a Lock Nut (order separately). Optional heavy-duty type has precisely machined helical locking
surfaces that mate exactly with the air-feed collar for added mpacy resistance. Patent no. 3,015,242. Available for
21000 through 24000 series air-feed drills (not 25000 series).
PRESS FIT STANDARD

PART
NO.
PRESS FIT
TLL-16520
TLL-16522
TLL-16523
TLL-16524
TLL-16525
TLL-16526
39/64
B
DIA
.4995
.4990
.7495
.7490
.8745
.8740
1.2495
1.2490
1.4990
1.4985
1.9990
1.9985
A
DIA
.3750
.3755
.5000
.5005
.6250
.6255
.8750
.8756
1.1252
1.1258
1.5002
1.5008
B
DIA
.4995
.4990
.7495
.7490
.8745
.8740
1.2495
1.2490
1.4990
1.4985
1.9990
1.9985
C D
L
B
MATCHING MATCHING
ADAPTOR
LOCK
TIP
NUT
PRICE
EACH
F
DIA
L.H.
THREAD
7/16
3/4
1-1/8
.625
3/4
1/2-20 14441 A-21106 18.00
7/16
3/4
1-3/16
.625
7/8
3/4-16 14442 A-21306 18.00
7/16
3/4
1-13/16 1.218 1-1/8
7/8-14 14443 A-22406 32.71
9/16
2-1/8
Please see our web

TLL-16521
A
DIA
.3750
.3755
.5000
.5005
.6250
.6255
.8750
.8756
1.1252
1.1258
1.5002
1.5008
1.468 1-3/8 1-1/4 1-1/4-12 14445 A-23310 32.71
27/32
A-23515 32.71
2-1/8 1.468
1-5/8 1-3/4 1-1/2-12 14446
1-1/2
A-24615 32.71
2-7/16 1.718
27/32
1-1/2 2-7/16 1.718 2-1/8 1-3/4
2-16
14447 A-24815 36.11
PRESS FIT HEAVY DUTY
L.H. THD.
HLL-16520
HLL-16521
HLL-16522
HLL-16523
HLL-16524
HLL-16525
HLL-16526
MATCHING MATCHING
ADAPTOR
LOCK
TIP
NUT
PRICE
EACH
F
DIA
L.H.
THREAD
7/16
3/4
1-1/8
.625
3/4
1/2-20 14441 A-21106 18.00
7/16
3/4
1-3/16
.625
7/8
3/4-16 14442 A-21306 18.00
7/16
3/4
1-13/16 1.218 1-1/8
7/8-14 14443 A-22406 32.71
9/16
27/32
1-1/2
27/32
1-1/2 2-7/16 1.718 2-1/8 1-3/4
2-1/8
Please see our web

NEW UTY
Y-D
HEAV SION!
VER
PART
NO.
1.468 1-3/8 1-1/4 1-1/4-12 14445 A-23310 32.71
A-23515 32.71
2-1/8 1.468
1-5/8 1-3/4 1-1/2-12 14446
A-24615 32.71
2-7/16 1.718
2-16
14447 A-24815 36.11
Precision knurled liner bushing for mounting air-feed drills in fiberglass or plastic tooling. One-piece design has two
angled locking surfaces to lock the drill motor in place, for superior strength. Optional heavy-duty type has precisely
machined helical locking surfaces that mate exactly with the air-feed colla for added impact esistance. Milled flats allow
close hole spacing. Available for 21000 and 22000 series air-feed drills. Patent no. 3,015,242.
KNURLED STANDARD
KNURLED
TLD-375
TLD-500
G
TLD-750
A
DIA
.3750
.3755
.5000
.5005
.7500
.7505
B
DIA
F
DIA
MATCHING
ADAPTOR TIP
PRICE
EACH
3/4
7/8
1-3/16
.625
7/8
1-1/8
A-21108
3/4
7/8
1-3/16
.625
7/8
1-1/8
A-21308
1-1/8
7/8
1-13/16
1.218
1-1/8
1-1/8
A-22508
Please see our

web catalog
for pricing.
PART
NO.
16.56
16.56
30.56
KNURLED HEAVY DUTY

A
39/64
L
D
B
70BU
NEW UTY
Y-D
HEAV SION!
VER
PART
NO.
HLD-375
HLD-500
HLD-750
A
DIA
.3750
.3755
.5000
.5005
.7500
.7505
B
DIA
F
DIA
MATCHING
ADAPTOR TIP
PRICE
EACH
3/4
7/8
1-3/16
.625
7/8
1-1/8
A-21108
3/4
7/8
1-3/16
.625
7/8
1-1/8
A-21308
1-1/8
7/8
1-13/16
1.218
1-1/8
1-1/8
A-22508
Please see our

web catalog
for pricing.
16.56
16.56
30.56
(4/07)
AIR FEED
Precision liner bushing for mounting air-feed drills

through a jig plate. The large head holds two standard
Lockscrews, to lock the drill motor in place. Milled flats
allow close hole spacing. Press fit into jig plate, then
fasten from behind with a Lock Nut (order separately).
Available for 21000 through 25000 series air-feed drills.
LOCK LINERS
L.H. THD.
L
B
A
F
C
PART
NO.
A-16520
A-16521
A-16522
L.H. THD.
L
B
A-16523
A-16524
A-16525
A-16526
C
D
F
A-16533
A-16533 ONLY
B
DIA
.4995
.4989
.7495
.7489
.8745
.8739
1.2495
1.2485
1.4990
1.4980
1.4990
1.4980
1.9990
1.9980
2.4990
2.4980
MATCHING MATCHING
ADAPTOR
LOCK
TIP
NUT
PRICE
EACH
F
DIA
7/16
3/4
1-3/4
5/8
3/4
1-1/16
1/2-20 14441 A-16500 16.89
7/16
3/4
1-3/4
5/8
1-1/16
3/4-16 14442 A-16501 16.89
7/16
3/4
2-7/16
59/64 1-1/8 1-3/16
7/8-14 14443 A-16502 30.42
9/16
L.H.
THREAD
H
D
STANDARD
A
DIA
.3750
.3756
.5000
.5006
.6250
.6256
.8750
.8756
1.1250
1.1260
1.1250
1.1260
1.5000
1.5010
2.0000
2.0015
2-11/16 1-3/64 1-1/2 1-7/16 1-1/4-12 14445 A-16503 30.42
27/32 1-1/2 2-11/16 1-3/64 1-3/4 1-15/16 1-1/2-12 14446 A-16504 30.42
27/32 1-1/2
1-11/64 1-3/4 1-15/16 1-1/2-12 14446 A-16505 30.42
27/32 1-1/2
1-11/64 2-1/2 1-15/16
1-3/8
3-3/4
1-9/16
2-16
14447 A-16506 33.83
2-5/8 2-1/2-16 14448 A-16513 53.98
LOCK NUTS
A
L.H. THD.
A
(THREAD SIZE)
1/2-20
3/4-16
7/8-14
1-1/4-12
1-1/2-12
2-16
2-1/2-16
REDUCERS
3/4
1
1-1/4
1-3/4
2
2-1/2
3
1/4
1/4
1/4
3/8
1/2
1/2
1/2
PRICE
EACH
2.94
3.00
3.61
4.61
5.74
6.74
12.88
Please see our

web catalog for
pricing.
These fine-thread Lock Nuts fit the entire

range of standard lock liners. Lock liners
press fit into the jig plate, then fasten from
behind with a Lock Nut.
LOCK NUT
PART NO.
14441
14442
14443
14445
14446
14447
14448
E
D
B
L.H. THREAD
C
A
L.H. THREAD
5/16
1/8
1
PART NO. PART NO.
STANDARD COOLANT
TYPE
TYPE
These Reducers allow mounting a smallerseries air-feed adaptor tip on a larger-series

drill motor. Available for either standard or
coolant-type air-feed drills. Available for
22000 through 25000 series air-feed drill
motors. Two Reducers can be used together
to step down several sizes.
(4/07)
17952
25018
25582
25583
20132
20017
27910
A-17952
A-25018
A-25582
A-25583
A-20132
A-20017
A-27910
A
INSIDE
THREAD
3/4-16
1-14
1-1/4-12
1-1/2-12
B
OUTSIDE
THREAD
1-14
1-1/4-12
1-1/2-12
1-1/4-12
1-1/2-12
1-1/2-12
2-16
C
DIA
D
DIA
1.0610-1.0604
1.3110-1.3104
1.5610-1.5604
1.3110-1.3104
1.0625
1.5610-1.5604
1.3125 1.5610-1.5604
1.5625 2.0610-2.0604
.8125
9/32
11/32
11/32
11/32
F
DIA
G*
1-3/8
1-5/8
1-15/16
1-5/8
1-15/16
1-15/16
2-1/2
1-1/16
1-5/16
1-9/16
1-5/16
1-9/16
1-9/16
2-1/16
STANDARD
TYPE
PRICE
COOLANT
TYPE
PRICE
Please see our

Contact
53.57
web catalog
Factory
for pricing.
* Coolant type does not have wrench flats.
71BU

USA DRILL SIZES
Drill/Decimal Drill/Decimal
80
79
1/64
78
77
76
75
74
73
72
71
70
69
68
1/32
67
66
65
64
63
62
61
60
59
58
57
56
3/64
55
54
53
1/16
52
51
50
49
48
5/64
47
46
45
44
43
42
3/32
41
40
39
38
37
36
7/64
35
34
33
32
31
1/8
30
29
28
72BU
.0135
.0145
.0156
.0160
.0180
.0200
.0210
.0225
.0240
.0250
.0260
.0280
.0292
.0310
.0312
.0320
.0330
.0350
.0360
.0370
.0380
.0390
.0400
.0410
.0420
.0430
.0465
.0469
.0520
.0550
.0595
.0625
.0635
.0670
.0700
.0730
.0760
.0781
.0785
.0810
.0820
.0860
.0890
.0935
.0938
.0960
.0980
.0995
.1015
.1040
.1065
.1094
.1100
.1110
.1130
.1160
.1200
.1250
.1285
.1360
.1405
Drill/Decimal
23/64 .3594
U .3680
3/8 .3750
V .3770
W .3860
25/64 .3906
X .3970
Y .4040
13/32 .4062
Z .4130
27/64 .4219
7/16 .4375
29/64 .4531
15/32 .4688
31/64 .4844
1/2 .5000
33/64 .5156
17/32 .5312
35/64 .5469
9/16 .5625
37/64 .5781
19/32 .5938
39/64 .6094
5/8 .6250
41/64 .6406
21/32 .6562
43/64 .6719
11/16 .6875
45/64 .7031
23/32 .7188
47/64 .7344
3/4 .7500
49/64 .7656
25/32 .7812
51/64 .7969
13/16 .8125
53/64 .8281
27/32 .8438
55/64 .8594
7/8 .8750
57/64 .8906
29/32 .9062
59/64 .9219
15/16 .9375
61/64 .9531
31/32
.9688
63/64 .9844
1 1.0000
9/64 .1406
27 .1440
26 .1470
25 .1495
24 .1520
23 .1540
5/32 .1562
22 .1570
21 .1590
20 .1610
19 .1660
18 .1695
11/64 .1719
17 .1730
16 .1770
15 .1800
14 .1820
13 .1850
3/16 .1875
12 .1890
11 .1910
10 .1935
9 .1960
8 .1990
7 .2010
13/64 .2031
6 .2040
5 .2055
4 .2090
3 .2130
7/32 .2188
2 .2210
1 .2280
A .2340
15/64 .2344
B .2380
C .2420
D .2460
E .2500
1/4 .2500
F .2570
G .2610
17/64 .2656
H .2660
I .2720
J .2770
K .2810
9/32 .2812
L .2900
M .2950 +64th
19/64 .2969 increments up
N .3020 to 1-7/8"
5/16 .3125
O .3160 +32nd
P .3230 increments up
21/64 .3281 to 2-1/4"
Q .3320
R .3390 +16th
11/32 .3438 increments up
S .3480 to 4-1/4"
T .3580
METRIC DRILL SIZES

Drill/Decimal
.35mm
.38mm
.40mm
.42mm
.45mm
.48mm
.50mm
.55mm
.60mm
.65mm
.70mm
.75mm
.80mm
.85mm
.90mm
.95mm
1.00mm
1.05mm
1.10mm
1.15mm
1.20mm
1.25mm
1.30mm
1.35mm
1.40mm
1.45mm
1.50mm
1.55mm
1.60mm
1.65mm
1.70mm
1.75mm
1.80mm
1.85mm
1.90mm
1.95mm
2.00mm
2.05mm
2.10mm
2.15mm
2.20mm
2.25mm
2.30mm
2.35mm
2.40mm
2.45mm
2.50mm
2.55mm
2.60mm
2.65mm
2.70mm
2.75mm
2.80mm
2.90mm
3.00mm
3.10mm
3.20mm
3.25mm
3.30mm
3.40mm
3.50mm
.0138
.0150
.0157
.0165
.0177
.0189
.0197
.0217
.0236
.0256
.0276
.0295
.0315
.0335
.0354
.0374
.0394
.0413
.0433
.0453
.0472
.0492
.0512
.0531
.0551
.0571
.0591
.0610
.0630
.0650
.0669
.0689
.0709
.0728
.0748
.0768
.0787
.0807
.0827
.0846
.0866
.0886
.0906
.0925
.0945
.0965
.0984
.1004
.1024
.1043
.1063
.1083
.1102
.1142
.1181
.1220
.1260
.1280
.1299
.1339
.1378
Drill/Decimal
3.60mm
3.70mm
3.75mm
3.80mm
3.90mm
4.00mm
4.10mm
4.20mm
4.25mm
4.30mm
4.40mm
4.50mm
4.60mm
4.70mm
4.75mm
4.80mm
4.90mm
5.00mm
5.10mm
5.20mm
5.25mm
5.30mm
5.40mm
5.50mm
5.60mm
5.70mm
5.75mm
5.80mm
5.90mm
6.00mm
6.10mm
6.20mm
6.25mm
6.30mm
6.40mm
6.50mm
6.60mm
6.70mm
6.75mm
6.80mm
6.90mm
7.00mm
7.10mm
7.20mm
7.25mm
7.30mm
7.40mm
7.50mm
7.60mm
7.70mm
7.75mm
7.80mm
7.90mm
8.00mm
8.10mm
8.20mm
8.25mm
8.30mm
8.40mm
8.50mm
8.60mm
.1417
.1457
.1476
.1496
.1535
.1575
.1614
.1654
.1673
.1693
.1732
.1772
.1811
.1850
.1870
.1890
.1929
.1969
.2008
.2047
.2067
.2087
.2126
.2165
.2205
.2244
.2264
.2283
.2323
.2362
.2402
.2441
.2461
.2480
.2520
.2559
.2598
.2638
.2657
.2677
.2717
.2756
.2795
.2835
.2854
.2874
.2913
.2953
.2992
.3031
.3051
.3071
.3110
.3150
.3189
.3228
.3248
.3268
.3307
.3346
.3386
Drill/Decimal
8.70mm .3425
8.75mm .3445
8.80mm .3465
8.90mm .3504
9.00mm .3543
9.10mm .3583
9.20mm .3622
9.25mm .3642
9.30mm .3661
9.40mm .3701
9.50mm .3740
9.60mm .3780
9.70mm .3819
9.75mm .3839
9.80mm .3858
9.90mm .3898
10.00mm .3937
10.20mm .4016
10.50mm .4134
10.80mm .4252
11.00mm .4331
11.20mm .4409
11.50mm .4528
11.80mm .4646
12.00mm .4724
12.20mm .4803
12.50mm .4921
13.00mm .5118
13.50mm .5315
14.00mm .5512
14.50mm .5709
15.00mm .5906
15.50mm .6102
16.00mm .6299
16.50mm .6496
17.00mm .6693
17.50mm .6890
18.00mm .7087
18.50mm .7283
19.00mm .7480
19.50mm .7677
20.00mm .7874
20.50mm .8071
21.00mm .8268
21.50mm .8465
22.00mm .8661
22.50mm .8858
23.00mm .9055
23.50mm .9252
24.00mm .9449
24.50mm .9646
25.00mm .9843
+1.00mm
increments
up to 48mm
+5.00mm
increments
from 50mm
up to 105mm
TAP GUIDE SIZES

(Priced as specials)
Tap Guide
Tap Size* Nominal ID Size Tap Drill Size**
#0-80 .0616
3/64
#2-56 .0883
#50
#2-64 .0880
#50
#4-40 .1152
#43
#4-48 .1147
#42
#5-40 .1282
#38
#5-44 .1280 (3.25mm)
#37
#6-32 .1421
#36
#6-40 .1412
#33
#8-32 .1681
#29
#8-36 .1676
#29
#10-24 .1954
#25
#10-32 .1941
#21
1/4-20 .2565
#7
1/4-28 .2546
#3
5/16-18 .3197
F
5/16-24 .3179
I
3/8-16 .3831
5/16
3/8-24 .3804
Q
7/16-14 .4468
U
7/16-20 .4440
25/64
1/2-13 .5100
27/64
1/2-20 .5065
29/64
9/16-12 .5733
31/64
9/16-18 .5697
33/64
5/8-11 .6368
17/32
5/8-18 .6322
37/64
3/4-10 .7630
21/32
3/4-16 .7581
11/16
7/8-9 .8894
49/64
7/8-14 .8843
13/16
1-8 1.0162
7/8
1-14 1.0093
15/16
METRIC
M1.6x0.35
M2x0.4
M2.5x0.45
M3x0.5
M3.5x0.6
M4x0.7
M5x0.8
M6x1
M8x1.25
M8x1
M10x1.5
M10x1.25
M12x1.75
M12x1.25
M14x2
M14x1.5
M16x2
M16x1.5
M18x2.5
M18x1.5
M20x2.5
M20x1.5
M22x2.5
M22x1.5
M24x3
M24x2
.0651
.0810 (#46)
.1008
.1207
.1407
.1613
.2010 (#7)
.2410
.3214
.3197
.4009
.4002
.4805
.4789
.5600
.5584
.6387
.6372
.7191
.7159
.7978
.7946
.8765
.8734
.9583
.9537
1.25mm or #55
1.60mm or #52
2.05mm or #46
2.50mm or #39
2.90mm or #32
3.30mm or #30
4.20mm or #19
5.00mm or #8
6.80mm or H
7.00mm or J
8.50mm or R
8.80mm or 11/32
10.20mm or 13/32
10.80mm or 27/64
12.00mm or 15/32
12.50mm or 1/2
14.00mm or 35/64
14.50mm or 37/64
15.50mm or 39/64
16.50mm or 21/32
17.50mm or 11/16
18.50mm or 47/64
19.50mm or 49/64
20.50mm or 13/16
21.00mm or 53/64
22.00mm or 7/8
* Coarse series shown in bold. Pitch callout

not required on metric coarse series.
** Closest size for 75% theoretical thread.

Drill Jig Bushings

Uploaded by

Copyright:

Available Formats

Drill Jig Bushings

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Drill Jig Bushings

Uploaded by

Copyright:

Available Formats

E&E SPECIAL PRODUCTS 7200 MILLER DRIVE, WARREN, MI 48092, 586-978-3377

PRINTED IN U.S.A. COPYRIGHT 2008 CARR LANE MANUFACTURING CO. 11952-703

E&E SPECIAL PRODUCTS 7200 MILLER DRIVE, WARREN, MI 48092, 586-978-3377

E&E SPECIAL PRODUCTS 7200 MILLER DRIVE, WARREN, MI 48092, 586-978-3377

WHAT MAKES A CARR LANE

Carr Lane drill bushings are all

Our nationwide network of stocking

As you expect with all Carr Lane

E&E SPECIAL PRODUCTS 7200 MILLER DRIVE, WARREN, MI 48092, 586-978-3377

E&E SPECIAL PRODUCTS 7200 MILLER DRIVE, WARREN, MI 48092, 586-978-3377

E&E SPECIAL PRODUCTS 7200 MILLER DRIVE, WARREN, MI 48092, 586-978-3377

E&E SPECIAL PRODUCTS 7200 MILLER DRIVE, WARREN, MI 48092, 586-978-3377

FLAT MILLED RENEWABLE:

Types FM and FMC (carbide). Replaceable bushing used for extra

HEAD PRESS FIT:

Types L and PM (metric). Liners are permanent bushings used to

SERRATED PRESS FIT:

Types HL and HM (metric). Similar to an L bushing, but with a head to

Types CH and CHM (metric). Similar to an SF renewable bushing, but

E&E SPECIAL PRODUCTS 7200 MILLER DRIVE, WARREN, MI 48092, 586-978-3377

E&E SPECIAL PRODUCTS 7200 MILLER DRIVE, WARREN, MI 48092, 586-978-3377

Type EZ. Another liner for cast-in-place or potted installation, used to

Oil grooves are available on most drill-bushing types, including P, H,

Types DG and DGM (metric). A bushing for cast-in-place or potted

DIAMOND-KNURL UN-A-LOK LINER:

Types CB and CBC (carbide). Headless and head-type bushings

E&E SPECIAL PRODUCTS 7200 MILLER DRIVE, WARREN, MI 48092, 586-978-3377

E&E SPECIAL PRODUCTS 7200 MILLER DRIVE, WARREN, MI 48092, 586-978-3377

INSTALLATION AND TECHNICAL DATA

1/2 to 1-1/2 times

To minimize drill bending and maximize hole accuracy, mount

Direct workpiece contact is usually not recommended. Chips

To avoid jig-plate or bushing distortion, do not use excessive

SLOPED WORKPIECE SURFACES:

SPECIAL BUSHINGS FOR CLOSE

E&E SPECIAL PRODUCTS 7200 MILLER DRIVE, WARREN, MI 48092, 586-978-3377

E&E SPECIAL PRODUCTS 7200 MILLER DRIVE, WARREN, MI 48092, 586-978-3377

INSTALLATION AND TECHNICAL DATA

ANSI standards. Counterbores prevent binding and heat

DRILL ENTRANCE RADIUS:

We offer bushings with unfinished ODs for custom-fitting to

We recommend installing bushings with an arbor press

GROUND LEAD FOR

Bushing OD is ground concentric to the ID to within .0003 TIR

All bushings feature a concentric ground lead and a 45

Long bushings with small IDs are slightly counterbored for

Any dimensions where tolerances are not specifically listed

E&E SPECIAL PRODUCTS 7200 MILLER DRIVE, WARREN, MI 48092, 586-978-3377

E&E SPECIAL PRODUCTS 7200 MILLER DRIVE, WARREN, MI 48092, 586-978-3377

TYPE H DRILL BEARING LENGTH

BUSHING LENGTH (UNDER HEAD)

TYPES SF & FM DRILL BEARING LENGTH

BUSHING LENGTH (UNDER HEAD)

E&E SPECIAL PRODUCTS 7200 MILLER DRIVE, WARREN, MI 48092, 586-978-3377

E&E SPECIAL PRODUCTS 7200 MILLER DRIVE, WARREN, MI 48092, 586-978-3377

1. SPECIAL ID SIZE (WITHIN

ID/OD must be .70

Please contact factory for pricing.

Special ID sizes include any ID size that is not a standard

Example: (6) H-10-8-.0365