Hydraulics | Merkel Wiper PU 6

Merkel Wiper PU 6

Merkel Wiper PU 6

Material

Material Code Hardness

Polyurethane 95 AU V149 95 Shore A

Operating conditions
Profile d ≤ 70 Profile d > 70
Material 95 AU V149
Temperature range in °C
Fig. 1 Merkel Wiper PU 6 Hydraulic oils HL, HLP –30 … +110
HFA fluids +5 … +50
HFB fluids +5 … +50
Product description HFC fluids –30 … +40
HFD fluids –
Single-acting PUR wiper with static seal-
Water +5 … +50
ing edge on the outside diameter.
HETG (rapeseed oil) –30 … +60
HEES (synthetic esters) –30 … +80
Product advantages HEPG (glycol) –30 … +50
Mineral greases –30 … +110
Dirt wiper with bearing segments on the
Running speed v in m/s 2
heel of the wiper and lightly rounded
wiper lip
Surface quality
N No ingress of dirt and water spray via

outside diameter Surface roughness Ra Rmax

N Reliably wipes away dirt Sliding surface * *

N Leaves a residual film of oil on retract- Groove base ≤1,6 µm ≤6,3 µm

ing rod Side of groove ≤3,0 µm ≤15,0 µm

N No twisting and pressure build-up * Surface roughness of the sliding surface to suit the sealing component used.
between seal and wiper
N Highly wear-resistant.
Design notes

Application Please observe our general design notes in → Technical Manual.

Earth moving equipment, presses, min- Tolerance recommendation

ing, injection moulding machines, sup- Nominal Ø d D D1
port cylinders. 12 … 200 H10 H11

The tolerance for the Ø d is defined by the buffer seal.

Lead-in chamfers Fitting & installation

Length and angle are to be designed to
suit the rod seal used. Careful fitting is a prerequisite for the
correct function of the Merkel Wiper
PU 6. Generally, wipers can be quickly
and easily fitted by deforming into a kid-
ney shape. → Technical Manual.

© Merkel Freudenberg Fluidtechnic GmbH | Seals for Fluid Power Catalog 2007
 Hydraulics | Merkel Wiper PU 6

Article list

L1 ≥ H

Ø ≤ 70 Ø > 70
L+0,2

H H
R2 R1 ≤ 0,4

ØD Ø D1 Ød
Rounded and free of burrs

d D L H D1 Profile R2 Material Article No.

12 18,6 3,8 5,3 15 3,3 1 95 AU V149 24375925 D
14 20,6 3,8 5,3 17 3,3 1 95 AU V149 24375926 D
16 22,6 3,8 5,3 19 3,3 1 95 AU V149 24375927 D
18 24,6 3,8 5,3 21 3,3 1 95 AU V149 24375928 D
20 28,6 5,3 6,5 23 4,3 1 95 AU V149 24004784 B
22 30,6 5,3 6,5 25 4,3 1 95 AU V149 24004788 B
25 33,6 5,3 6,5 28 4,3 1 95 AU V149 24004792 B
28 36,6 5,3 6,5 31 4,3 1 95 AU V149 24004798 B
30 38,6 5,3 6,5 33 4,3 1 95 AU V149 24004799 B
32 40,6 5,3 6,5 35 4,3 1 95 AU V149 24004805 B
35 43,6 5,3 6,5 38 4,3 1 95 AU V149 24004808 B
36 44,6 5,3 6,5 39 4,3 1 95 AU V149 24004811 B
40 48,6 5,3 6,5 43 4,3 1 95 AU V149 24004816 B
42 50,6 5,3 6,5 45 4,3 1 95 AU V149 24004820 B
45 53,6 5,3 6,5 48 4,3 1 95 AU V149 24375906 B
45 55,6 5,3 6,5 48 5,3 1 95 AU V149 24004827 B
50 58,6 5,3 6,5 53 4,3 1 95 AU V149 24375907 B
50 60,6 5,3 6,5 53 5,3 1 95 AU V149 24004835 B
55 65,6 5,3 7 58 5,3 1 95 AU V149 24004846 B
56 64,6 5,3 6,5 59 4,3 1 95 AU V149 24375908 D
56 66,6 5,3 7 59 5,3 1 95 AU V149 24004849 B
60 68,6 5,3 6,5 63 4,3 1 95 AU V149 24375909 D
60 70,6 5,3 7 63 5,3 1 95 AU V149 24004853 B
63 73,6 5,3 7 66 5,3 1 95 AU V149 24004859 B
65 75,6 5,3 7 68 5,3 1 95 AU V149 24004869 B
70 78,6 5,3 6,5 73 4,3 1 95 AU V149 24375910 D
70 80,6 5,3 7 73 5,3 1 95 AU V149 24004881 B
75 87,2 7,2 12 81 6,1 1 95 AU V149 24004892 B
80 92,2 7,2 12 86 6,1 1 95 AU V149 24004909 B
85 97,2 7,2 12 91 6,1 1 95 AU V149 24004917 B
90 102,2 7,2 12 96 6,1 1 95 AU V149 24004928 B
100 112,2 7,2 12 106 6,1 1 95 AU V149 24004944 B
105 117,2 7,2 12 111 6,1 1 95 AU V142 24004956 D
110 122,2 7,2 12 116 6,1 1 95 AU V149 24004961 B
115 127,2 7,2 12 121 6,1 1 95 AU V149 24004968 B
120 132,2 7,2 12 126 6,1 1 95 AU V149 24004975 B
B Available from stock D On request: Tool is available, delivery at short notice

© Merkel Freudenberg Fluidtechnic GmbH | Seals for Fluid Power Catalog 2007
Hydraulics | Merkel Wiper PU 6

L1 ≥ H

Ø ≤ 70 Ø > 70
L+0,2

H H
R2 R1 ≤ 0,4

ØD Ø D1 Ød
Rounded and free of burrs

d D L H D1 Profile R2 Material Article No.

125 140 10,2 16 132,6 7,5 1,5 95 AU V149 24004981 B
140 155 10,2 16 147,6 7,5 1,5 95 AU V149 24005002 B
150 162,2 7,2 12 156 6,1 1 95 AU V142 24368329 D
150 165 10,2 16 157,6 7,5 1,5 95 AU V149 24005013 B
160 175 10,2 16 167,6 7,5 1,5 95 AU V149 24005025 B
180 200 10,2 18 190 10 3 95 AU V149 24005039 B
190 210 10,2 18 200 10 3 95 AU V149 24005044 B
200 220 10,2 18 210 10 3 95 AU V149 24005050 B
B Available from stock D On request: Tool is available, delivery at short notice

© Merkel Freudenberg Fluidtechnic GmbH | Seals for Fluid Power Catalog 2007
The catalog details are based on the practical use may noticeably influence
experience of many years of research the functioning of the seals. Against this
in the development and production of background generalised statements
seals in the Freudenberg Group and on the function of the catalog products
correspond to our current level of know- are not possible. Details in this catalog
how. merely represent general and non-bin-
The sealing action of many catalog ding reference values which make no
products is, however, not only created claim to be valid for every application.
by the component itself. In many We therefore recommend you to always
cases – depending on the specific discuss specific applications with our
application – it depends significantly on consultancy service. In the event of very
the other parameters, such as installa- high and special loads, for example due
tion point, counter surface, pressure, to aggressive media, the seal should be
operating temperature, media to be selected in co-operation with us; trials to
sealed, lubrication, effects of vibration check the functional reliability are often
and any ingress of dirt from outside. indispensable.
These and other unknown factors in

Merkel Freudenberg
Fluidtechnic GmbH
Industriestr. 64
D-21107 Hamburg
Tel.: +49(0)40/75 30 6-0
Fax: +49(0)40/75 30 6-440
E-mail: merkel@freudenberg.de
www.merkel-freudenberg.de

© Merkel Freudenberg Fluidtechnic GmbH | Seals for Fluid Power Catalog 2007