PM Series PB 2006

PM Series - PB Type
Bevel-Helical Gear Units
Superior Gear Technology
www.renold.com
PM Series - PB Type Product Features

Heavy duty taper roller bearings
fitted for maximum load capacity
and long life.
Hardened and profile ground

helical and spiral bevel gears for
quiet running and high efficiency.
Hollow output shaft

for direct mounting,
with plug-in single and
double extension
output shafts for total
design flexibility.
Speed Reducer and motorised

unit types. Accepts standard IEC
and NEMA motors, B5 and B14
flanges.
One piece close grained cast iron gear

case for strength and absorption of
vibration for quiet running
Sprag clutch back stop option

on motorised units to prevent
drive reversals
Applications:
Conveyors
Packaging Machinery
Mining
Food Process Machinery
Timber
Water Treatment
Textiles
Foundry equipment
Materials Handling
www.renold.com
2
Contents
Page No
PM Series - PB Type Unit Product Features
ATEX Approval Details
General Specification
Product Design Variations
6-7
Unit Mounting and Handing Details
8-9
Electric Motor Specifications
10 - 12
Ordering Designation Code
13
Inertia Values
14
Selection of PM Series - PB Type Unit
15 - 16
Load Classification by Application
17
Overhung and Thrust Loads
18
Motorised Unit - Selection Data
19 - 31
Motorised Unit - Dimensions
32 - 35
Speed Reducer Unit - Overhung and Axial Load Capacities
36
Speed Reducer Unit - Exact Ratio
37
Speed Reducer Unit - Selection Data
38 - 47
Speed Reducer Unit - Dimensions
48 - 50
Plug-in Output Shaft Dimensions
51
Torque Restraint Bracket
52
Shrink Disc
53
Torque Arm Assembly
54
Installation, Maintenance and Storage
55
Lubrication
56
Oil Capacities
57
Weights
58 - 59
Renold Worldwide Sales and Service
62 - 63
www.renold.com
3
ATEX Approval Details

ATEX Approval
Gears products for operating in potentially explosive
atmospheres.
General
Gears units are classified as ATEX Group II

Category 2 equipment, which embodies sufficient safeguards to
be suitable for use in potentially explosive atmospheres for
normal operation and for operation during an expected
malfunction.
It is essential that there is sufficient lubricant to prevent the
gears and bearings running dry. Gear units should be
inspected daily for signs of oil leakage, overheating or noisy
operation.
Gear units should be cleaned at regular intervals depending on
the operating conditions, to ensure that dust coatings never
exceed 5mm. Plastic parts should be wiped clean with a damp
cloth.
Oil leaks should be dealt with as quickly as practical. Compound
joint faces and shims should be cleaned and thread-locking
sealant should be applied to bolts and plugs prior to reassembly.
The temperature of any external surfaces must not exceed the

permitted maximum of 135C (T4).
Higher temperature class T3 is available dependant on unit
mounting, ratio and gear type. For further details consult
Renold.
.
As a general rule, gear units should be mounted with their feet
horizontal. For other mountings, particularly with shaft
Gears.
mounted units, consult
WARNING: IF MOUNTING WITH VERTICAL INPUT OR OUTPUT
SHAFTS, THE ATEX CERTIFICATION DOES NOT APPLY.
Unit Selection
The gear unit selection procedures must include an additional
reliability factor of 1.25 for mechanical ratings and 1.25 for
thermal ratings.
ATEX Nameplate
www.renold.com
4
PM Series - PB Type Product Specification

Gear Case
The gear cases are of close grained cast iron with all joints and
bearing bores accurately machined to ensure oil tightness and
precise gear location.
Shafts
Standard shaft extensions are to metric dimensions, but imperial
shaft extensions for units complying with BS3027: 1968 or to suit
the requirements of the North American market are also available.
The output Shaft is manufactured in carbon steel, but if required by
applicational conditions, can be made from high tensile steel, in
single or double extension.
Bearings
Standard metric taper/roller bearings are fitted throughout the
PM Series range of units in both single and double
extension shaft options.
Oil Seals
Semi-dual lip oil seals are fitted to all hollow output shaft units.
However, provision has been made to fit two oil seals if
weatherproofing or dustproofing is required.
Lubrication
Gear and bearings are positively lubricated by oil from the sump in
the underdriven and overdriven versions at normal motor speeds.
With the vertical type, grease lubrication is necessary to the
wheeline bearings.
For lower speeds it may be necessary to consider grease lubrication
of certain bearings and in this instance it is advisable to consult with
Renolds Engineers. Full lubrication details can be found under the
Installation & Maintenance section.
Input Housing
When the
PM Series unit is supplied as a non-motorised
unit i.e. for direct coupling or driven via a V-belt or chain drive, a
high speed input shaft housing is fitted. This consists of a robust
housing containing the input shaft which is supported in
maintenance-free bearings.
Backstop
Sprag clutch backstops can be fitted to most motorised PB units to
prevent unit run back when required. See pages 32 to 34 for unit
sizes and motor frame sizes.
www.renold.com
5
PM Series PB Type - Product Design Variations
Motorised unit with hollow output shaft.

Motor adaptor suitable for all standard
IEC and NEMA motors.
Speed reducer unit with

input shaft housing.
Standard hollow output shaft

with semi dual lip oil seal for
added oil retention.
www.renold.com
6
PM Series PB Type - Product Design Variations
PM Series - PB type motorised unit
PM Series - PB type speed reducer unit
www.renold.com
7
PM Series - PB Type - Mounting & Handing
Underdriven
No Sprag backstop fitted.
UA
UC
UE
UG
*Sprag backstop fitted.
UB
UD
UF
UH
UJ
UL
UN
UQ
UK
UM
UP
UR
US
UU
UW
UY
UT
UV
UX
UZ
OA
OC
OE
OG
OB
CD
OF
OH
Overdriven
OJ
OL
ON
OQ
OK
OM
OP
OR
OS
OU
OW
OY
OT
OV
OX
OZ
* BACKSTOP FITTED TO MOTORISED UNITS - D100 TO D200 FRAME SIZES ONLY

* FOR ANY OTHER MOUNTING PLEASE REFER TO RENOLD GEARS
www.renold.com
8
PM Series - PB Type - Mounting & Handing
Vertical
VA
VC
VE
VG
VB
VD
VF
VH
VJ
VL
VN
VQ
VK
VM
VP
VR
VS
VU
VW
VY
VT
VV
VX
VZ
V1
V3
V5
V7
V2
V4
V6
V8
Wall Mounting
WA
WC
WE
WG
WB
WD
WF
WH
WJ
WL
WN
WQ
WK
WM
WP
WR
* BACKSTOP FITTED TO MOTORISED UNITS - D100 TO D200 FRAME SIZES ONLY

www.renold.com
9
Electric Motor Specification

4POLE/1500 RPM
Rated
DMA1 = aluminium series 1 Output
DM1 = cast iron series 1 Power
IEC-DIN
PN
kW
380
V
IU
A
Full Load Current

400
420
V
V
IN
IO
A
A
Full-Load Full-Load Full-Load Locked Rotor Locked Rotor Breakdown

Speed
Power Efficiency
Current
Torque
Torque
Factor
nN
cos
La/LN
Ma/MN
Mk/MN
min-1
%
Moment
of
Inertia
J
kgm2
Nett
Weight
IM B3
m
kg
DMA1
80
K4
0.55
1.58
1.55
1.56
1365
0.79
64.7
4.0
1.8
2.1
0.001146
8.9
DMA1
80
G4
0.75
2.00
1.99
2.00
1345
0.80
67.9
4.0
2.0
2.3
0.001263
9.6
DMA1
90
S4
1.10
2.75
2.76
2.73
1380
0.78
72.8
4.6
2.1
2.4
0.002761
12.5
DMA1
90
L4
1.50
3.72
3.78
3.93
1370
0.77
73.9
4.6
2.1
2.4
0.003283
15.0
DMA1
100
L4
2.20
5.13
5.12
4.80
1430
0.76
80.5
5.7
2.2
2.7
0.003119
19.2
DMA1
100
LX4
3.00
6.78
6.66
6.51
1400
0.82
79.5
5.2
2.0
2.6
0.004704
23.0
DMA1
112
M4
4.00
8.93
8.48
8.08
1430
0.82
83.2
5.8
2.1
2.6
0.006418
29.0
DMA1
132
S4
5.50
11.80
11.39
10.84
1435
0.85
82.3
6.5
2.0
2.5
0.013249
43.5
DMA1
132
M4
7.50
15.77
15.50
14.77
1435
0.82
84.8
6.5
2.2
2.5
0.016912
61.0
DM1
160
M4
11.00
22.1
21.2
21.3
1450
0.85
88.1
7.6
2.5
3.0
0.0724
113
DM1
160
L4
15.00
27.6
28.1
28.2
1460
0.86
89.5
7.9
2.7
3.1
0.0929
133
DM1
180
M4
18.50
35.3
33.4
33.4
1470
0.88
90.9
7.5
2.5
3.0
0.1350
167
DM1
180
L4
22.00
42.0
39.8
39.5
1465
0.88
90.9
7.5
2.2
3.1
0.1360
181
DM1
200
L4
30.00
55.6
53.3
52.0
1480
0.88
92.0
7.2
2.5
3.2
0.2450
232
DM1
225
S4
37.00
68.2
65.5
64.0
1485
0.88
92.3
7.3
2.0
2.8
0.3900
287
DM1
225
M4
45.00
81.3
79.1
76.0
1480
0.89
92.4
7.5
2.2
3.0
0.4500
322
DM1
250
M4
55.00
101
96.0
95.0
1480
0.89
93.0
7.0
2.3
3.1
0.6400
381
DM1
280
S4
75.00
137
131
126
1480
0.88
93.5
6.1
2.0
2.9
1.0450
510
DM1
280
M4
90.00
168
152
155
1485
0.88
94.2
7.8
2.7
3.3
1.3960
600
Moment
of
Inertia
J
kgm2
Nett
Weight
IM B3
m
kg
6POLE/1000 RPM
Rated
DMA1 = aluminium series 1 Output
DM1 = cast iron series 1 Power
IEC-DIN
PN
kW
380
V
IU
A
Full Load Current

400
420
V
V
IN
IO
A
A
Full-Load Full-Load Full-Load Locked Rotor Locked Rotor Breakdown

Speed
Power Efficiency
Current
Torque
Torque
Factor
nN
cos
La/LN
Ma/MN
Mk/MN
min-1
%
DMA1
80
K6
0.37
1.19
1.26
1.26
915
0.67
63.0
3.5
2.0
2.4
0.001268
8.5
DMA1
80
G6
0.55
1.81
1.85
2.26
900
0.71
60.5
3.2
2.0
2.3
0.001392
9.2
DMA1
90
S6
0.75
2.35
2.31
2.30
910
0.71
65.6
3.5
2.0
2.3
0.00316
12.0
DMA1
90
L6
1.10
3.38
3.44
3.40
910
0.67
69.1
3.7
2.1
2.3
0.003794
14.0
DMA1
100
L6
1.50
3.92
3.88
3.87
935
0.76
73.3
4.1
1.9
2.2
0.004605
19.5
DMA1
112
M6
2.20
5.79
5.48
5.24
945
0.75
77.4
5.0
2.0
2.4
0.006949
28.0
DMA1
132
S6
3.00
7.39
7.07
6.97
960
0.78
78.3
5.4
1.8
2.2
0.012912
50.0
DMA1
132
M6
4.00
9.44
9.35
9.60
955
0.77
80.6
5.4
1.9
2.1
0.016082
58.0
DMA1
132
MX6
5.50
13.00
12.60
12.80
955
0.77
84.3
5.4
2.0
2.4
0.019174
65.0
DM1
160
M6
7.50
16.1
15.9
16.0
965
0.79
85.3
6.5
1.8
3.0
0.0800
108
DM1
160
L6
11.00
22.7
22.4
22.6
970
0.8
87.8
7.1
1.8
3.1
0.1080
131
DM1
180
L6
15.00
29.5
29.3
29.1
980
0.83
89.2
7.2
2..5
2.9
0.1670
171
DM1
200
L6
18.50
36.5
35.5
35.1
980
0.84
89.9
6.7
2.0
3.0
0.3020
216
DM1
200
LX6
22.00
42.3
40.6
39.8
975
0.87
89.8
6.7
2.0
2.8
0.3420
225
DM1
225
M6
30.00
57.6
55.4
54.2
985
0.85
91.7
6.2
2.3
2.8
0.5250
292
DM1
250
M6
37.00
69.5
67.3
65.7
985
0.87
91.5
6.8
2.1
3.1
0.8070
408
DM1
280
S6
45.00
79.1
80.2
77.3
985
0.88
92.4
6.5
2.0
2.9
1.3340
465
DM1
280
M6
55.00
97.6
99.0
95.4
985
0.87
92.7
6.7
2.1
3.0
1.5980
540
www.renold.com
10
Electric Motor Dimensions

DM1 : 4 POLE/1500 RPM
Type
Frame
Poles
AC
ED
EF
GD
HD
LA
DMA1
80
4/6
146
19
40
25
7.5
15.5
224
268
12
LD
83
DMA1
90S
4/6
158
24
50
32
7.5
20
230
312
12
88
DMA1
90L
4/6
158
24
50
32
7.5
20
230
332
12
88
DMA1
100
4/6
190
28
60
45
7.5
24
271
367
15
83
DMA1
112
4/6
216
28
60
45
7.5
24
290
384
15
100
DMA1
132S
4/6
246
38
80
56
7.5
10
33
330
445
15
105
DMA1
132M
4/6
246
38
80
56
7.5
10
33
330
483
15
105
DM1
160M/MX
4/6
311
42
110
100
5.0
12
37
505
615
14
150
DM1
160L
4/6
311
42
110
100
5.0
12
37
505
670
14
150
DM1
180M
4/6
352
48
110
100
5.0
14
42.5
530
700
16
160
DM1
180L
4/6
352
48
110
100
5.0
14
42.5
530
740
16
160
DM1
200L/LX
4/6
394
55
110
100
5.0
16
49
10
580
770
17
190
DM1
225S
442
60
140
125
7.5
18
53
11
640
815
20
190
DM1
225M
4/6
442
60
140
125
7.5
18
53
11
640
845
20
190
DM1
250M
4/6
481
65
140
125
7.5
18
58
11
695
910
20
203
DM1
280S
4/6
543
75
140
125
7.5
20
67.5
12
770
995
23
220
DM1
280M
4/6
543
75
140
125
7.5
20
67.5
12
770
1045
23
220
Type
Frame
Poles
Flange
IPE
DMA1
80
4/6
165
130j6
200
4x12
3.5
FF165
2xPg16
80
65
DMA1
90S
4/6
165
130j6
200
4x12
3.5
FF165
2xPg16
80
65
DMA1
90L
4/6
165
130j6
200
4x12
3.5
FF165
2xPg16
80
65
DMA1
100
4/6
215
180j6
250
4x15
FF215
2xPg16
80
65
DMA1
112
4/6
215
180j6
250
4x15
FF215
2xPg21
100
100
DMA1
132S
4/6
265
230j6
300
4x15
FF265
2xPg21
100
100
DMA1
132M
4/6
265
230j6
300
4x15
FF265
2xPg21
100
100
DM1
160M/MX
4/6
300
250j6
350
4x19
FF300
2xPg29
150
160
DM1
160L
4/6
300
250j6
350
4x19
FF300
2xPg29
150
160
DM1
180M
4/6
300
250j6
350
4x19
FF300
2xPg29
150
160
DM1
180L
4/6
300
250j6
350
4x19
FF300
2xPg29
150
160
DM1
200L/LX
4/6
350
300h6
400
4x19
FF350
2xPg36
188
208
DM1
225S
400
350h6
450
8x19
FF400
2xPg36
188
208
DM1
225M
4/6
400
350h6
450
8x19
FF400
2xPg36
188
208
DM1
250M
4/6
500
450h6
550
8x19
FF500
2xPg42
216
246
DM1
280S
4/6
500
450h6
550
8x19
FF550
2xPg42
216
246
DM1
280M
4/6
500
450h6
550
8x19
FF500
2xPg42
216
246
www.renold.com
11
Electric Motor - Terminal Box Position

270
Terminal Box Position
180
90
180
270
Unless otherwise specified-position A will be issued.
90
Terminal Box
Alternative Types of TEFV Motors
On motor sizes 71 to 225 the terminal box is an integral

part of the frame.
Single phase
Capacitor start / induction run

Permanent capacitor
Capacitor start / capacitor run
Three phase
Squirrel cage standard motors

Two speed
Increased safety - Eex e
Flameproof Exd.
non sparking Exn.
Brake motors
Marine requirements
Smoke extract duty
High Efficiency motors
Dust Ignition Proof - BS6467 Zone Z
Force ventilation + Encoders + Tachos
Variable speed drives
Motor-inverter combination
Wash down
Tropicalised
Motor sizes 250 and above have a conventional

terminal box that can rotate 180. As standard in this
range the terminal box entries are on the right side of
the motor viewed from shaft end.
By rotating the terminal box, these entries can be
transferred to the left side.
On the table below are the standard terminal
arrangements and terminal box entries.
Motor
Frame Size
71
Quantities and sizes

Terminal box entries
Terminals
6 X M4
2 X 22,5
(1)
100
6 X M4
2 X 28,5
(1)
112
6 X M4
4 X 28,5
(2)
132
6 X M6
4 X 28,5
(2)
160
6 X M6
4 X 37
(2)
180
6 X M8
4 X 37
(2)
200 and 255
6 X M8
4 X 47
(2)
250 and 280
6 X M10
2 X Pg 42
(3)
315
6 X M10
2 X Pg 48
(3)
315 to 400
6 X M12
2 X Pg 48
(3)
DC
Hydraulic
Air
(1) One entry on each side

(2) Two entries on each side
(3) Two entries on the right side that can be transferred
to the left side.
www.renold.com
12
Ordering Procedure - Unit Designation Code

To ensure that the correct PM Series PB Type unit is supplied and that your order is processed without delay, please quote the full designation
code as detailed below:
Motorised Unit
PB4
SC
D4P
040
UA
TS
Unit type
and size
Special
features
Ratio Code
Motor
terminal box
(see page 12)
Metric M or
American A shafts
D flange
4 pole motor
Unit hand of
assembly
(see page 8-9)
4kW motor
Motorised Ready Unit - To suit free issue motor

PB4
SC
D100RDY
UA
WP
Unit type
and size
Special
features
Ratio Code
Metric M or
American A shafts
D100 motor
ready
Unit hand of
assembly
(see page 8-9)
Reduction Gear or Speed Reducer Unit

PB4
Red XXX
SC
UA
SS
Unit type
and size
Special
features
Reduction
gear
Metric M or
American A shafts
Unit hand of
assembly
(see page 8-9)
Ratio Code
Ratio codes for gear units PB35 to PB50 only

Special Features include:BM - Braked motor
SS - Slow speed running
WP - Weather proof
TR - Torque restraint bracket
SD - Shrink disc
TA - Torque arm bracket
RATIO
016
020
025
CODE
SA
SB
SC
RATIO
032
040
050
CODE
SD
SE
SF
RATIO
063
080
100
CODE
SG
SH
SJ
RATIO
125
160
CODE
SK
SL
Ratio codes for gear units PB60 to PB80 only

RATIO
016
020
025
CODE
TA
TB
TC
RATIO
032
040
050
CODE
TD
TE
TF
RATIO
063
080
100
www.renold.com
13
CODE
TG
TH
TJ
RATIO
125
160
CODE
TK
TL
PM Series - PB Type Inertia Values WR2 (kgm2)

Input shaft (Reduction)
Nominal Ratio
PB35
PB40
PB50
PB60
PB70
PB80
20
25
32
40
50
63
80
100
125
160
0.00098
0.00079
0.00063
0.00058
0.00054
0.00054
0.00053
0.00053
0.00053
0.00053
0.00098
0.00079
0.00063
0.00058
0.00054
0.00054
0.00053
0.00053
0.00053
0.00053
0.00098
0.00079
0.00063
0.00058
0.00054
0.00054
0.00053
0.00053
0.00053
0.00053
0.00496
0.00331
0.00297
0.00695
0.00415
0.00325
0.0021
0.00207
0.00206
0.00212
0.00496
0.00331
0.00297
0.00695
0.00415
0.00325
0.0021
0.00207
0.00206
0.00212
0.00496
0.00331
0.00297
0.00695
0.00415
0.00325
0.0021
0.00207
0.00206
0.00212
Nominal Ratio
PB35
PB40
PB50
PB60
PB70
PB80
20
25
32
40
50
63
80
100
125
160
0.00118
0.00099
0.00083
0.00078
0.00074
0.00074
0.00073
0.00073
0.00073
0.00073
0.00118
0.00099
0.00083
0.00078
0.00074
0.00074
0.00073
0.00073
0.00073
0.00073
0.00118
0.00099
0.00083
0.00078
0.00074
0.00074
0.00073
0.00073
0.00073
0.00073
0.00611
0.00446
0.00412
0.00810
0.00530
0.00440
0.00325
0.00322
0.00321
0.00327
0.00611
0.00446
0.00412
0.00810
0.00530
0.00440
0.00325
0.00322
0.00321
0.00327
0.00611
0.00446
0.00412
0.00810
0.00530
0.00440
0.00325
0.00322
0.00321
0.00327
Input shaft (Motorised)
Bevel pinionshaft line

Nominal Ratio
PB35
PB40
PB50
PB60
PB70
PB80
20
25
32
40
50
63
80
100
125
160
0.00033
0.00051
0.00072
0.00100
0.00117
0.00150
0.00182
0.00219
0.00250
0.00273
0.00037
0.00055
0.00076
0.00104
0.00121
0.00154
0.00186
0.00223
0.00254
0.00277
0.00049
0.00067
0.00088
0.00116
0.00133
0.00166
0.00198
0.00235
0.00266
0.00289
0.00547
0.00682
0.00891
0.01104
0.01286
0.01496
0.01790
0.02073
0.02261
0.02463
0.00477
0.00612
0.00821
0.01034
0.01216
0.01426
0.01720
0.02003
0.02191
0.02393
0.00575
0.00710
0.00919
0.01132
0.01314
0.01524
0.01818
0.02101
0.02289
0.02491
Layshaft
Nominal Ratio
PB35
PB40
PB50
PB60
PB70
PB80
ALL
0.00273
0.00591
0.01401
0.02623
0.07315
0.12143
Hollow output shaft

Nominal Ratio
PB35
PB40
PB50
PB60
PB70
PB80
ALL
0.02143
0.04903
0.12337
0.29365
0.64782
1.23447
Plug-in output shaft

Type
PB35
PB40
PB50
PB60
PB70
PB80
Single Ext
Single Ext - Flanged
Double Ext
Double Ext - Flanged
0.00059
0.00080
0.00071
0.00092
0.00163
0.00226
0.00205
0.00268
0.00398
0.00502
0.00483
0.00588
0.00866
0.01023
0.10588
0.01215
0.02554
0.03140
0.32410
0.03827
0.03846
0.04690
0.04979
0.05823
See page 16 for examples of total unit inertia.
www.renold.com
14
PM Series - PB Type Selection Information

To select a motorised or non-motorised gear
unit for an application, the following
information must be available.
Power/Torque
a) Input or output (kW) or torque (Nm).
b) Type and power output of prime mover
(kW). Required mounting position.
c) For input speeds below 250 rev/min
consult our Technical Sales Department
giving details of required output torque (Nm)
and diameter of driven shaft (mm).
Speed
Gear unit input and output rev/min.
Duty
a) The characteristics of the drive eg. degree
of impulsiveness of the driven load.
b) Duration of service in hours/day.
c) Starting load (kW) and number of starts
per day.
d) For intermittent duty, reversing or shock
loading, state normal power (kW) and
frequency.
e) Disposition and details of external loads
imposed on input/output shafts.
Diameter of driven shaft in the case shaft
mounting arrangement.
f) Working conditions, i.e. clean, dusty, moist,
abnormal temperatures etc.
If the operating conditions are in any way
unusual it is advisable to consult our
Technical Sales Department.
Enquiry/Ordering Procedure
At the order or enquiry stage, please quote
the catalogue reference, shaft assembly
number and nominal ratio or exact ratio if
this is important (see tables). Non standard
mounting positions should be indicated with
a sketch. Where a double extension
wormwheel shaft is required, please state
any special requirements regarding
alignment of keyways.
Mechanical Rating
The mechanical powers listed are those
which the PM Series units will transmit for 10
hours each day and correspond to a service
factor of 1,0. Where non-uniform loading or
a working day other than 10 hours is
involved, a service factor fD should be
applied to the selection power or torque
which is taken from table 2. High numbers of
starts per hour also influence the mechanical

selection. Table 3 shows the starts factor fS
which should also be applied to the selection
power or torque.
For guidance a comprehensive list of the
various load conditions for a number of
applications is given in Table 1. When
confirming the mechanical selection powers
therefore, the rating must be equal to or
greater than calculated power or torque
demand x application service factor fD (table
1 and table 2) x starts factor fS (table 3)
Efficiencies
The efficiency figures are approximate only
and are those that could be expected from a
gearbox which is fully run-in and operating
under full load with the lubricant at its full
working temperature.
For intermittent rating where the lubricant
may remain comparatively cool, the
efficiency may be somewhat lower due to
the increased oil churning losses associated
with the higher viscosity of the cool oil.
We shall be pleased to advise on any
particular application.
Selection Procedure
MOTORISED UNIT SELECTION PROCEDURE
PM SERIES MOTORISED
To select a PM series motorised unit, the
following procedure should be followed.
a) Determine required output speed.
b) Select the total Mechanical Service Factor
fD (table 2) and Starts Factor fs (table 3)
Total Mechanical = f x f
s
D
Service Factor
c) Determine the power absorbed by the
machine.
Absorbed Power (kW) =
Absorbed torque (Nm) x Speed (RPM)
9550
d) Select an electric motor that will give an
output power greater than that of the
absorbed power above.
e) Select a gear unit from the tables on pages
26 to 38 using the motor power and the
output speed as the basis.
Ensure that the Mechanical service factor
Sf of the unit selected exceeds the
selection factor from b) above.
NON-MOTORISED UNIT
SELECTION PROCEDURE
When a non-motorised gear unit is under
consideration proceed as follows:-
www.renold.com
15
a) Establish the ratio, input speed and input

power or output torque required.
b) Determine the Load Classification for the
appropriate application from table 1 and
the corresponding Service Factor from
table 2. Multiply this by the factor for
starts per hour in table 3. The input power
or output torque in 1 must now be
multiplied by this factor in order to
establish the required mechanical rating.
This value must be equal to or less than
the Mechanical Rating listed against the
appropriate rating and input speed shown
on pages 36 to 45.
c) Where an output shaft is fitted, check that
any Overhung and/or Axial loads applied
are within the capabilities of the unit - see
page 36.
PM Series - Selection Examples

Mechanical
Selection
Torque
Mechanical
Selection
Power
Nm =
(kW) =
Actual
Torque (Nm)
Requirement
Actual
Power (kW)
Requirement
Mechanical
Service (fD)
Factor
Mechanical
Service (fD)
Factor
Starts (fS)
Factors
Starts (fS)
Factor
Example 1 [Motorised Unit]

A motorised gear unit is required to drive an inclined chain
elevator having a headshaft torque of 4200Nm, operating
for 24 hours per day continuously at 44 RPM.
The duty is is considered a steady load.
a) Approximate motor power (kW) = 4200 x 45
9550
= 19.8 kW
Nearest motor power is 22 kW.
b) From the Load Classification and Service Factor tables
1 and 2, a steady load operating 24 hours/day the
duty factor fD = 1.25.
c) The starts factor from table 3 for continuous running is
fS = 1.
Example 2 Non-Motorised Unit [Speed Reducer]

A right angle gear unit is required to drive a machine using
an electric motor as the prime mover @ 1500 RPM. The output
torque required is 2100Nm with a gear ratio of 100:1.
The duty cycle is heavy shock load, 10 hours/day running
with 7 stops/starts per hour. Maximum ambient temperature
is 32 degrees C.
a) mechanical Actual
mechanical
starts
selection
= torque X service factor fD X factor fS
torque
[table 1]
[table 2]
d) Total selection factor S = fD x fS

= 1.25 x 1
= 1.25
= 2100 X
= 4410 Nm
e) From the selection tables on pages 19 to 31 a 22kW drive

can be found on page 30.
45 RPM is the closest speed to the one required offering a
mechanical service factor SF of 1.76 which satisfies the
selection factor in d) above.
1.75
1.2
The selection tables on page 38 to 47 show that for a gear

ratio of 100:1 page 45 @ 1500 RPM the PB 6 unit is the
size that fulfills both the selection criteria in a)
The unit selection is PB6REDXXXSJ***
The selected unit is a PB7SDD4P22***
MOTORISED UNIT INERTIA

Total Input
Shaft inertia
Bevel pinion
Shaft inertia
motor
inertia
Bevel pinion
Shaft inertia
motorised input
shaft inertia
Hollow output =
Shaft inertia
Hollow output
shaft inertia
Total plug-in
Output shaft
Inertia
Hollow output
plug-in shaft
+
shaft inertia
inertia
TOTAL INERTIA VALUES

With respect to INPUT
TOTAL INERTIA VALUES

With respect to OUTPUT
input shaft
values
output
values
NON MOTORISED INERTIA

[SPEED REDUCER]
Total Input
Shaft inertia
input shaft (reduction)
Bevel pinion
Shaft inertia
Bevel pinion
Shaft inertia
Hollow output
=
Shaft inertia
Hollow output
shaft inertia
Total plug-in
Output shaft
Inertia
Hollow output
plug-in shaft
+
shaft inertia
inertia
bevel pinionshaft
2
helical ratio
+ layshaft values
2
2
1st helical ratio x bevel ratio
2
( )
layshaft values x final

helical
ratio
+ bevel x Bevel
Final
x
pinion
ratio
ratio
shaft
www.renold.com
16
output values
2
overall actual ratio
+
+
input
overall
shaft x actual
rate
value
PM Series - Load Classification by Application

Table 1
Sugar (1)
Dredges
Cable reels
Conveyors
Cutter head drives
Jig drives
Manoeuvring winches
Pumps
Screen drive
Stackers
Utility winches
Dry dock cranes
Main hoist
Auxiliary hoist
Boom, luffing
Rotating, swing or slew
Tracking, drive wheels
Elevators
Bucket - uniform load
Bucket - heavy load
Bucket - continuous
Centrifugal discharge
Escalators
Freight
Gravity discharge
Man lifts
Passenger
Extruders (plastic)
Film
Sheet
Coating
Rods
Tubing
Blow moulders
Pre-plasticiers
Fans
Centrifugal
Cooling towers
Induced draft
Forced draft
Induced draft
Large, mine etc.
Large, industrial
Light, small diameter
Feeders
Apron
Belt
Disc
Reciprocating
Screw
Food industry
Beef slicer
Cereal cooker
Dough mixer
Meat grinder
Generators - not welding
Hammer mills
Hoists
Heavy duty
Agitators
Pure liquids
S
Liquids and solids
M
Liquids-variable density
M
Blowers
Centrifugal
S
Lobe
M
Vane
S
Brewing and Distilling
Bottling machinery
S
Brew kettles-continuous duty
S
Cookers-continuous duty
S
Mash tubs-continuous duty
S
Scale hopper-frequent starts
M
Can filling machines
S
Cane knives (1)
M
Car dumpers
H
Car pullers
M
Clarifiers
S
Classifiers
M
Clay working machinery
Brick press
H
Briquette machine
H
Clay working machinery
M
Pug mill
M
Compressors
Centrifugal
S
M
Lobe
Reciprocating - multi-cylinder
M
Reciprocating - single cylinder
H
Conveyors - uniformly loaded or fed
Apron
S
S
Assembly
Belt
S
Bucket
S
Chain
S
Flight
S
Oven
S
Screw
S
Conveyors - heavy duty
not uniformly fed
Apron
M
Assembly
M
Belt
M
Bucket
M
M
Chain
M
Flight
Live roll
*
Oven
M
Reciprocating
H
Screw
M
Shaker
H
Crane Drives - not dry dock
S
Main hoists
Bridge travel
*
Trolley travel
*
Crushers
Ore
H
Stone
H
M
M
M
H
H
M
M
H
M
M
(2)
(2)
(2)
(3)
(4)
S
M
S
S
S
M
S
*
*
S
S
S
S
S
M
M
S
*
*
M
M
M
S
M
M
S
H
M
M
S
M
M
S
H
H
Medium duty
Skip hoist
Laundry
Washers - reversing
Tumblers
Line shafts
Driving processing equipment
Light
Other line shafts
Lumber industry
Barkers, hydraulic, mechanical
Burner conveyor
Chain saw and drag saw
Chain transfer
Craneway transfer
De-barking drum
Edger feed
Gang feed
Green chain
Live rolls
Log deck
Log haul-incline
Log haul-well type
Log turning device
Main log conveyor
Off bearing rolls
Planer feed chains
Planer floor chains
Planer tilting hoist
Re-saw merry-go-round conveyor
Roll cases
Slab conveyor
Small waste conveyor-belt
Small waste conveyor-chain
Sorting table
Tipple hoist conveyor
Tipple hoist drive
Transfer conveyors
Transfer rolls
Tray drive
Trimmer feed
Waste conveyor
Machine tools
Bending roll
Punch press-gear driven
Notching press-belt drive
Plate planners
Tapping machine
Other machine tools
Main drives
Auxiliary drives
Metal mills
Drawn bench carriage
and main drive
Pinch, dryer and scrubber
rolls, reversing
Slitters
Table conveyors nonreversing group drives
M
M
M
M
M
S
S
M
M
H
H
H
H
M
M
M
H
H
H
H
H
H
M
M
M
M
M
H
H
S
M
M
M
M
M
M
M
M
M
M
H
*
H
H
M
S
M
*
M
M
single acting: 1 or 2 cylinders

double acting: single cylinder
Rotary - gear type
Rotary - lobe, vane
Rubber and plastics industries
Crackers (1)
Laboratory equipment
Mixed mills (1)
Refiners (1)
Rubber calenders (1)
Rubber mill, 2 on line (1)
Rubber mill, 3 on line (1)
Sheeter (1)
Tyre building machines
Tyre and tube press openers
Tubers and strainers (1)
Warming mills (1)
Sand muller
Screens
Air washing
Rotary, stone or gravel
Travelling water intake
Sewage disposal equipment
Bar screens
Chemical feeders
Collectors
Dewatering screws
Scum breakers
Slow or rapid mixers
Thickeners
Vacuum filters
Slab pushers
Steering gear
Stokers
Sugar industry
Cane knives (1)
Crushers (1)
Mills (1)
Textile industry
Batchers
Calenders
Cards
Dry cans
Dryers
Dyeing machinery
Looms
Mangles
Nappers
Pads
Range drives
Slashers
Soapers
Spinners
Tenter frames
Washers
Winders
Windlass
Individual drives
H
Reversing
*
Wire drawing and flattening machine M
Wire winding machine
M
Mills, rotary type
Ball (1)
M
Cement kilns (1)
M
Dryers and coolers (1)
M
Kilns other than cement
M
Pebble (1)
M
Rod, plain & wedge bar (1)
M
Tumbling barrels
H
Mixers
Concrete mixers continuous
M
Concrete mixers intermittent
M
Constant density
S
Variable density
M
Oil industry
Chillers
M
Oil well pumping
*
Paraffin filter press
M
Rotary kilns
M
Paper mills
Agitators (mixers)
M
Barker-auxiliaries hydraulic
M
Barker-mechanical
H
Barking drum
H
M
Beater and pulper
Bleacher
S
Calenders
M
Calenders-super
H
Converting machine except
M
cutters, platers
Conveyors
S
Couch
M
Cutters, platers
H
Cylinders
M
Dryers
M
Fell stretcher
M
H
Fell whipper
Jordans
M
Log haul
H
Presses
M
Pulp machine reel
M
Stock chest
M
M
Suction roll
M
Washers and thickeners
Winders
M
Printing presses
*
Pullers
Barge haul
H
Pumps
S
Centrifugal
M
Proportioning
Reciprocating
single acting:
M
3 or more cylinders
double acting:
2 or more cylinders
M
*
*
S
S
H
M
H
M
M
M
S
M
*
*
M
M
M
S
M
S
S
S
S
M
M
M
M
M
M
*
S
M
M
M
M
M
M
M
M
M
M
M
M
M
*
M
M
M
M
M
M
*
For multiple stop start applications and full load starts please refer to Renold Gears
Service Factors
S
M
H
*
(1)
(2)
(3)
(4)
Table 2 (Service Factor fD)

Prime mover
(Drive input)
Driven machinery characteristics

Duration
Steady
Medium
Highly
impulsive impulsive
Service
load
hours/day
Electric, Air &

Hydraulic Motors
or Steam Turbine
(Steady input)
Intermittent 3hrs/day max

3 - 10
over 10
0.90
1.00
1.25
1.00
1.25
1.50
1.50
1.75
2.00
Multi-cylinder I.C. Intermittent engine (Medium 3hrs/day max

impulsive input)
3 - 10
over 10
1.00
1.25
1.50
1.25
1.50
1.75
1.75
2.00
2.25
Single-cylinder
Intermittent I.C. engine
3hrs/day max
(Highly impulsive
3 - 10
input)
over 10
1.25
1.50
1.75
1.50
1.75
2.00
2.00
2.25
2.50
of starts per hour

Starts Factor fs
Steady
Medium Impulsive
Highly Impulsive
Refer to Renold
Select on 24 hours per day service factor only.
Use service factor of 1.00 for any duration of service.
Note
Machinery characteristics and service factors listed in this catalogue
are a guide only. Some applications (e.g. constant power) may
require special considerations. Consult Renold Gears.
Units to ATEX approval must be selected

with a minimum service factor of 1.25.
IMPORTANT
Table 3 Factor for Starts/Hours (fS)

Maximum number
=
=
=
=
=
=
=
=
Table 4 Thermal Service Factor fT
0-1
1 - 30
30 - 60
60 -
1.0
1.2
1.3
1.5
Ambient C
Temp F
10
50
20
68
30
86
40
105
50
122
60
140
Factor ft
0.87
1.0
1.16
1.35
1.62
1.97
www.renold.com
17
PM Series - Overhung and Thrust Loads

The overhung load may be calculated by the following formula:
Output shafts of gear units are frequently fitted with a spur pinion,
chain pinion or belt pulley causing an overhung load to be imposed
on the output shaft and bearings. These loads can generally be
sustained by the gear unit; however, if the load is greater than the
maximum allowable load for the unit, it may be necessary to either
select a larger unit or to lessen the effect of the load on the shaft
bearings. This can be done in two ways. The pinion can be mounted
on a shaft in its own bearings and the shaft coupled to the gear
unit; or the wheel shaft may be extended beyond the overhung
load and fitted with an outboard bearing. In order to obtain the
best possible arrangement for a particular application (where large
over hung loads are anticipated) customers are advised to submit
details of the load to our Sales Technical Staff for their
consideration.
9.55P X 106 X F (Newtons)

RXS
Where
P =
Power absorbed at output shaft (kW)
S =
Speed of output shaft in rev/min
R =
Pitch circle radius of chain pinion, spur or helical

gear, or belt pulley in mm.
F =
Overhung drive application factor as follows:
Chain pinion
1.00
Spur or helical gear 1.25
In the interests of good design, the overhung member should be

fitted as close as possible to the gear case in order to minimise the
stresses and reduce the deflecting moment on the unit.
Vee pulley
1.50
Flat belt pulley
2.00
The overhung load capacities listed in table 5 assume the load is

applied mid-way along the output shaft extension, the relevant
dimension from the centre line of the unit being as given below.
The maximum imposed axial thrust and overhung loads to which

the units can be subjected are given in tables 5 and 6.
Imposed axial thrust loads can also be minimised by the use of
flexible couplings on the input and output shafts.
For drives where both imposed thrust and overhung loads are
encountered, it is advisable to consult our Technical Sales Staff.
Where a double extension shaft is fitted ,the maximum overhung
loads listed apply in full to each shaft extension.
Unit Size
PB35
150
PB40
170
PB50
200
PB60
235
PB70
270
PB80
270
- based on Single Extension Plug-in Shaft
www.renold.com
18
PM Series - PB Type - Motorised - Selection Data

PI
0.55 kW
4P - D80KD 1365 RPM

6P - D80GD 900 RPM
n2
Actual
M2
SF
Ratio
Overhung
Axial
Load
Load
Product Code
rpm
Nm
73
18.78
70
12.12
9000
12000
PB3SBD4P005***
55
24.76
92
9.20
9000
12000
PB3SCD4P005***
43
31.64
118
7.20
9000
12000
PB3SDD4P005***
33
41.09
153
5.54
9000
12000
PB3SED4P005***
29
47.28
176
4.82
9000
12000
PB3SFD4P005***
22
61.05
228
3.73
9000
12000
PB3SGD4P005***
18
77.01
287
2.96
9000
12000
PB3SHD4P005***
14
100.96 377
3.98
18000
16000
PB4SJD4P005***
14
100.96 377
2.26
9000
12000
PB3SJD4P005***
11
128.60 480
3.13
18000
16000
PB4SKD4P005***
11
128.60 480
1.77
9000
12000
PB3SKD4P005***
8.8
155.40 580
2.59
18000
16000
PB4SLD4P005***
8.8
155.40 580
1.47
9000
12000
PB3SLD4P005***
7.1
127.12 720
3.65
25000
20000
PB5SKD6P005***
7.0
128.60 653
2.30
18000
16000
PB4SKD6P005***
7.0
128.60 728
1.17
9000
12000
PB3SKD6P005***
5.9
153.61 870
3.02
25000
20000
PB5SLD6P005***
5.8
155.40 789
1.90
18000
16000
PB4SLD6P005***
5.8
155.40 880
0.97
8450
12000
PB3SLD6P005***
Key
n2
i
M2
SF
(max.) N (max.) N
Output Speed, rpm

Overall Ratio
Output Torque Nm, Mechanical
Service Factory, Mechanical
For details of unit designation code see page 13.

The overhung load shown above is based on the maximum motor
Power being transmitted. For higher overhung loads consult Renold.
IMPORTANT
www.renold.com
19


PI
0.75 kW
4P - D80GD 1345 RPM

6P - D90SD 910 RPM
n2
Actual
M2
SF
Ratio
Overhung
Axial
Load
Load
(max.) N
(max.) N
Product Code
rpm
Nm
72
18.78
97
8.76
9000
12000
PB3SBD4P007***
54
24.76
128
6.65
9000
12000
PB3SCD4P007***
43
31.64
163
5.20
9000
12000
PB3SDD4P007***
33
41.09
212
4.00
9000
12000
PB3SED4P007***
28
47.28
244
3.48
9000
12000
PB3SFD4P007***
22
61.05
315
2.70
9000
12000
PB3SGD4P007***
17
77.01
398
3.77
18000
16000
PB4SHD4P007***
17
77.01
398
2.14
9000
12000
PB3SHD4P007***
13
100.96 521
2.88
18000
16000
PB4SJD4P007***
13
100.96 521
1.63
9000
12000
PB3SJD4P007***
11
127.12 657
4.00
25000
20000
PB5SKD4P007***
10
128.60 664
2.26
18000
16000
PB4SKD4P007***
10
128.60 664
1.28
9000
12000
PB3SKD4P007***
8.8
153.61 793
3.31
25000
20000
PB5SLD4P007***
8.7
155.40 803
1.87
18000
16000
PB4SLD4P007***
8.7
155.40 803
1.06
9000
12000
PB3SLD4P007***
7.2
127.12 970
2.70
25000
20000
PB5SKD6P007***
7.1
128.60 881
1.70
18000
16000
PB4SKD6P007***
7.1
128.60 982 *0.87
5350
12000
PB3SKD6P007***
5.9
153.61 1173 2.24
25000
20000
PB5SLD6P007***
5.9
155.40 1064 1.41
18000
16000
PB4SLD6P007***
Key
n2
i
M2
SF
Output Speed, rpm

Overall Ratio

IMPORTANT
www.renold.com
20


1.1 kW
PI
4P - D90SD 1380 RPM

6P - D90LD 910 RPM
n2
Actual
M2
SF
Ratio
Overhung
Axial
Load
Load
(max.) N
(max.) N
Product Code
rpm
Nm
73
18.78
139
6.13
9000
12000
PB3SBD4P011***
56
24.76
183
4.65
9000
12000
PB3SCD4P011***
44
31.64
234
3.64
9000
12000
PB3SDD4P011***
34
41.09
303
2.80
9000
12000
PB3SED4P011***
29
47.28
349
4.30
18000
16000
PB4SFD4P011***
29
47.28
349
2.43
9000
12000
PB3SFD4P011***
23
61.05
451
3.33
18000
16000
PB4SGD4P011***
23
61.05
451
1.89
9000
12000
PB3SGD4P011***
18
77.01
569
2.64
18000
16000
PB4SHD4P011***
18
77.01
569
1.49
9000
12000
PB3SHD4P011***
14
99.80
737
3.56
25000
20000
PB5SJD4P011***
14
100.96 745
2.01
18000
16000
PB4SJD4P011***
14
100.96 745
1.14
9000
12000
PB3SJD4P011***
11
127.12 939
2.80
25000
20000
PB5SKD4P011***
11
128.60 949
1.58
18000
16000
PB4SKD4P011***
11
128.60 949 *0.90
6450
12000
PB3SKD4P011***
9.0
153.61 1134 2.31
25000
20000
PB5SLD4P011***
8.9
155.40 1147 1.31
18000
16000
PB4SLD4P011***
7.2
127.12 1423 1.84
25000
20000
PB5SKD6P011***
7.1
128.60 1291 1.16
18000
16000
PB4SKD6P011***
5.9
153.61 1720 1.53
25000
20000
PB5SLD6P011***
5.9
155.40 1561 *0.96
14000
16000
PB4SLD6P011***
* Max. Standard Plug-in Shaft Torque Nm
PB35
1045
PB40
1550
PB50
2700
PB60
4450
PB70
7950
PB80
11350
Overhung Load Capacity is that what can be applied along with the
lower of either M2 or the value stated in the table above.
Key
n2
i
M2
SF
Output Speed, rpm

Overall Ratio

www.renold.com
21
IMPORTANT
Units to ATEX approval must
be selected with a minimum
service factor of 1.25.

1.5 kW
PI
4P - D90LD 1370 RPM

6P - D100LD 935 RPM
n2
Actual
M2
SF
Ratio
Overhung
Axial
Load
Load
Product Code
rpm
Nm
(max.) N (max.) N
73
18.78
191
4.46
9000
12000
PB3SBD4P015***
55
24.76
251
3.38
9000
12000
PB3SCD4P015***
43
31.64
321
2.65
9000
12000
PB3SDD4P015***
33
41.09
417
3.60
18000
16000
PB4SED4P015***
33
41.09
417
2.04
9000
12000
PB3SED4P015***
29
47.28
480
3.13
18000
16000
PB4SFD4P015***
29
47.28
480
1.77
9000
12000
PB3SFD4P015***
23
60.35
612
4.29
25000
20000
PB5SGD4P015***
22
61.05
619
2.42
18000
16000
PB4SGD4P015***
22
61.05
619
1.37
9000
12000
PB3SGD4P015***
18
76.13
772
3.40
25000
20000
PB5SHD4P015***
18
77.01
781
1.92
18000
16000
PB4SHD4P015***
18
77.01
781
1.09
9000
12000
PB3SHD4P015***
14
99.80 1012 2.59
25000
20000
PB5SJD4P015***
14
100.96 1024 1.46
18000
16000
PB4SJD4P015***
14
100.96 1024 0.83
3750
12000
PB3SJD4P015***
11.4
82.23 1222 3.43
34000
35000
PB6THD6P015***
11
127.12 1289 2.04
25000
20000
PB5SKD4P015***
11
128.60 1304 1.15
18000
16000
PB4SKD4P015***
8.9
153.61 1558 1.68
25000
20000
PB5SLD4P015***
8.6
109.11 1621 2.59
34000
35000
PB6TJD6P015***
8.8
155.40 1576 *0.95
13650
16000
PB4SLD4P015***
7.6
122.26 1817 4.20
42000
50000
PB7TKD6P015***
7.3
128.76 1913 2.19
34000
35000
PB6TKD6P015***
7.4
127.12 1889 1.39
25000
20000
PB5SKD6P015***
7.3
128.60 1714 *0.88
10800
16000
PB4SKD6P015***
6.4
145.35 2160 3.55
42000
50000
PB7TLD6P015***
6.1
153.61 2283 1.15
25000
20000
PB5SLD6P015***
6.1
153.08 2275 1.84
34000
35000
PB6TLD6P015***
Key
n2
Output Speed, rpm
i
Overall Ratio
M2 Output Torque Nm,
Mechanical
SF Service Factory,
Mechanical
For details of unit designation
code see page 13.
The overhung load shown
above is based on the
maximum motor Power being
transmitted. For higher
overhung loads consult
Renold.
PB35
1045
PB40
1550
PB60
4450
PB50
2700
PB70
7950
PB80
11350
www.renold.com
22
IMPORTANT
Units to ATEX approval must
be selected with a minimum
service factor of 1.25.

2.2 kW
PI
4P - D100LD 1430 RPM
PI
2.2 kW (cont)
4P - D100LD 1430 RPM
6P - D112MD 945 RPM

n2
Actual
M2
SF
Overhung
Axial
Load
Load
Ratio
6P - D112MD 945 RPM

Actual
n2
Product Code
M2
SF
Ratio
(max.) N (max.) N
rpm
Nm
Axial
Load
Load
Product Code
rpm
Nm
76
18.78
268
3.18
9000
12000
PB3SBD4P022***
153.08 2181 1.96
34000
35000
PB6TLD4P022***
58
24.76
353
3.81
18000
16000
PB4SCD4P022***
7.7
122.26 2636 2.93
42000
50000
PB7TKD6P022***
58
24.76
353
2.41
9000
12000
PB3SCD4P022***
7.3
128.76 2777 1.53
34000
35000
PB6TKD6P022***
45
31.64
451
3.21
18000
16000
PB4SDD4P022***
7.4
127.12 2741 *0.96
15800
20000
PB5SKD6P022***
45
31.64
451
1.89
9000
12000
PB3SDD4P022***
6.5
145.35 3134 2.54
42000
50000
PB7TLD6P022***
35
41.09
586
2.56
18000
16000
PB4SED4P022***
6.2
153.61 3312 *0.79
20000
PB5SLD6P022***
35
41.09
586
1.45
9000
12000
PB3SED4P022***
6.2
153.08 3301 1.28
34000
35000
PB6TLD6P022***
31
46.74
666
3.94
25000
20000
PB5SFD4P022***
30
47.28
674
2.23
18000
16000
PB4SFD4P022***
30
47.28
674
1.26
9000
12000
PB3SFD4P022***
24
60.35
860
3.05
25000
20000
PB5SGD4P022***
23
61.05
870
1.72
18000
16000
PB4SGD4P022***
23
61.05
870 *0.98
8700
12000
PB3SGD4P022***
19
76.13 1085 2.42
25000
20000
PB5SHD4P022***
19
77.01 1097 1.37
18000
16000
PB4SHD4P022***
17
82.23 1172 3.65
34000
35000
PB6THD4P022***
14
99.80 1422 1.85
25000
20000
PB5SJD4P022***
14
100.96 1439 1.04
16100
16000
PB4SJD4P022***
13
109.11 1555 2.75
34000
35000
PB6TJD4P022***
11
128.76 1835 2.33
34000
35000
PB6TKD4P022***
11
127.12 1812 1.45
25000
20000
PB5SKD4P022***
11
128.60 1833 *0.82
7700
16000
PB4SKD4P022***
10
145.35 2071 3.65
42000
50000
PB7TLD4P022***
9.3
153.61 2189 1.20
25000
20000
PB5SLD4P022***
Key
n2
i
M2
SF
Overhung
(max.) N (max.) N
Output Speed, rpm

Overall Ratio

PB35
1045
PB40
1550
PB50
2700
PB60
4450
PB70
7950
PB80
11350
# Consult Renold Gears Technical Dept.
IMPORTANT
www.renold.com
23


3.0 kW
PI
4P - D100LXD 1400 RPM
PI
3.0 kW (cont)
4P - D100LD 1430 RPM
6P - D132SD 960 RPM

n2
Actual
M2
SF
Overhung
Axial
Load
Load
Ratio
6P - D112MD 945 RPM

Actual
n2
Product Code
M2
SF
Ratio
(max.) N (max.) N
rpm
Nm
Overhung
Axial
Load
Load
Product Code
rpm
Nm
(max.) N (max.) N
75
18.78
373
3.29
18000
16000
PB4SBD4P030***
11
128.76 2556 1.64
34000
35000
PB6TKD4P030***
75
18.78
373
2.28
9000
12000
PB3SBD4P030***
11
127.12 2523 1.04
19400
20000
PB5SKD4P030***
57
24.76
491
2.75
18000
16000
PB4SCD4P030***
10
145.35 2885 2.56
42000
50000
PB7TLD4P030***
57
24.76
491
1.73
9000
12000
PB3SCD4P030***
9.1
153.61 3049 *0.86
9300
20000
PB5SLD4P030***
45
31.27
621
4.23
25000
20000
PB5SDD4P030***
9.1
153.08 3038 1.38
34000
35000
PB6TLD4P030***
44
31.64
628
2.32
18000
16000
PB4SDD4P030***
8.0
120.37 3484 3.31
55000
55000
PB8TKD6P030***
44
31.64
628
1.35
9000
12000
PB3SDD4P030***
7.9
122.26 3539 2.21
42000
50000
PB7TKD6P030***
34
40.62
806
3.26
25000
20000
PB5SED4P030***
7.5
128.76 3727 1.16
34000
35000
PB6TKD6P030***
34
41.09
816
1.84
18000
16000
PB4SED4P030***
6.7
143.10 4142 2.80
55000
55000
PB8TLD6P030***
34
41.09
816
1.04
9000
12000
PB3SED4P030***
6.6
145.35 4207 1.92
42000
50000
PB7TLD6P030***
30
46.74
928
2.83
25000
20000
PB5SFD4P030***
6.3
153.08 4431 *0.97
24000
35000
PB6TLD6P030***
30
47.28
939
1.60
18000
16000
PB4SFD4P030***
30
47.28
939
0.91
6750
12000
PB3SFD4P030***
27
52.35 1039 4.03
34000
35000
PB6TFD4P030***
23
60.35 1198 2.19
25000
20000
PB5SGD4P030***
Key
n2
i
M2
SF
23
61.05 1212 1.24
18000
16000
PB4SGD4P030***
22
64.69 1284 3.26
34000
35000
PB6TGD4P030***
18
76.13 1511 1.74
25000
20000
PB5SHD4P030***

18
77.01 1529 *0.98
14500
16000
PB4SHD4P030***
17
82.23 1632 2.56
34000
35000
PB6THD4P030***
14
99.80 1981 1.33
25000
20000
PB5SJD4P030***
14
103.60 2056 3.59
42000
50000
PB7TJD4P030***
13
109.11 2166 1.93
34000
35000
PB6TJD4P030***
11
122.26 2427 3.04
42000
50000
PB7TKD4P030***
Output Speed, rpm

Overall Ratio
PB35
1045
PB40
1550
PB50
2700
PB60
4450
PB70
7950
PB80
11350
IMPORTANT
www.renold.com
24


4.0 kW
PI
4P - D112MD 1430 RPM
PI
4.0 kW (cont)
4P - D112MD 1430 RPM
6P - D132MD 955 RPM

n2
Actual
M2
SF
Overhung
Axial
Load
Load
(max.) N
(max.) N
Ratio
6P - D132MD 955 RPM

Actual
n2
Product Code
M2
SF
Ratio
rpm
Nm
Overhung
Axial
Load
Load
(max.) N
(max.) N
Product Code
rpm
Nm
76
18.78
487
2.51
18000
16000
PB4SBD4P040***
12
122.26 3168 2.38
42000
50000
PB7TKD4P040***
76
18.78
487
1.75
9000
12000
PB3SBD4P040***
11
128.76 3336 1.28
34000
35000
PB6TKD4P040***
58
24.48
634
4.14
25000
20000
PB5SCD4P040***
11
127.12 3294 *0.80
20000
PB5SKD4P040***
58
24.76
642
2.10
18000
16000
PB4SCD4P040***
10
143.10 3708 3.07
55000
55000
PB8TLD4P040***
58
24.76
642
1.32
9000
12000
PB3SCD4P040***
10
145.35 3766 2.01
42000
50000
PB7TLD4P040***
46
31.27
810
3.24
25000
20000
PB5SDD4P040***
9.3
153.08 3966 1.08
31000
35000
PB6TLD4P040***
45
31.64
820
1.76
18000
16000
PB4SDD4P040***
7.9
120.37 4670 2.46
55000
55000
PB8TKD6P040***
45
31.64
820
1.04
9000
12000
PB3SDD4P040***
7.8
122.26 4743 1.64
42000
50000
PB7TKD6P040***
35
40.62 1052 2.49
25000
20000
PB5SED4P040***
7.4
128.76 4996 *0.86
11600
35000
PB6TKD6P040***
35
41.09 1065 1.41
18000
16000
PB4SED4P040***
6.7
143.10 5552 2.08
55000
55000
PB8TLD6P040***
35
41.09 1065 *0.80
12000
PB3SED4P040***
6.6
145.35 5639 1.43
42000
50000
PB7TLD6P040***
34
41.66 1079 3.96
34000
35000
PB6TED4P040***
31
46.74 1211 2.17
25000
20000
PB5SFD4P040***
30
47.28 1225 1.22
18000
16000
PB4SFD4P040***
27
52.35 1356 3.15
34000
35000
PB6TFD4P040***
Key
n2
i
M2
SF
24
60.35 1564 1.68
25000
20000
PB5SGD4P040***
For details of unit designation code see page 13
23
61.05 1582 *0.95
13500
16000
PB4SGD4P040***
22
64.69 1676 2.55
34000
35000
PB6TGD4P040***

19
76.13 1973 1.33
25000
20000
PB5SHD4P040***
18
78.07 2023 3.76
42000
50000
PB7THD4P040***
17
82.23 2131 2.01
34000
35000
PB6THD4P040***
14
99.80 2586 1.02
18400
20000
PB5SJD4P040***
14
103.60 2684 2.82
42000
50000
PB7TJD4P040***
13
109.11 2827 1.51
34000
35000
PB6TJD4P040***
Output Speed, rpm

Overall Ratio
PB35
1045
PB40
1550
PB50
2700
PB60
4450
PB70
7950
PB80
11350
IMPORTANT
www.renold.com
25


5.5 kW
PI
4P - D132SD 1435 RPM
PI
5.5 kW (cont)
4P - D132SD 1435 RPM
6P - D132MXD 955 RPM

n2
Actual
M2
SF
Overhung
Axial
Load
Load
Ratio
6P - D132MXD 955 RPM

Actual
n2
Product Code
M2
SF
Ratio
(max.) N (max.) N
rpm
Nm
Overhung
Axial
Load
Load
Product Code
rpm
Nm
(max.) N (max.) N
77
18.57
659
3.76
25000
20000
PB5SBD4P055***
13
109.11 3874 1.11
32000
35000
PB6TJD4P055***
76
18.78
667
1.82
18000
16000
PB4SBD4P055***
12
120.37 4273 2.66
55000
55000
PB8TKD4P055***
76
18.78
667
1.27
9000
12000
PB3SBD4P055***
12
122.26 4340 1.74
42000
50000
PB7TKD4P055***
59
24.48
869
3.02
25000
20000
PB5SCD4P055***
11
128.76 4571 *0.94
21000
35000
PB6TKD4P055***
58
24.76
879
1.52
18000
16000
PB4SCD4P055***
10
143.10 5080 2.25
55000
55000
PB8TLD4P055***
58
24.76
879
0.97
8450
12000
PB3SCD4P055***
10
145.35 5160 1.47
42000
50000
PB7TLD4P055***
46
31.27 1110 2.36
25000
20000
PB5SDD4P055***
9.4
153.08 5435 *0.79
3000
35000
PB6TLD4P055***
45
31.64 1123 1.29
18000
16000
PB4SDD4P055***
7.9
120.37 6421 1.79
55000
55000
PB8TKD6P055***
43
33.35 1184 3.58
34000
35000
PB6TDD4P055***
7.8
122.26 6522 1.20
42000
50000
PB7TKD6P055***
35
40.62 1442 1.82
25000
20000
PB5SED4P055***
6.7
143.10 7634 1.51
55000
55000
PB8TLD6P055***
35
41.09 1459 1.03
15800
16000
PB4SED4P055***
6.6
145.35 7754 1.04
37500
50000
PB7TLD6P055***
34
41.66 1479 2.90
34000
35000
PB6TED4P055***
31
46.74 1659 1.58
25000
20000
PB5SFD4P055***
30
47.28 1679 *0.89
11500
16000
PB4SFD4P055***
29
49.71 1765 4.40
42000
50000
PB7TFD4P055***
Key
n2
i
M2
SF
27
52.35 1859 2.31
34000
35000
PB6TFD4P055***
23
61.42 2181 3.54
42000
50000
PB7TGD4P055***
24
60.35 2142 1.23
25000
20000
PB5SGD4P055***

22
64.69 2297 1.87
34000
35000
PB6TGD4P055***
19
76.13 2703 *0.97
16500
20000
PB5SHD4P055***
18
78.07 2772 2.76
42000
50000
PB7THD4P055***
17
82.23 2919 1.47
34000
35000
PB6THD4P055***
14
102.00 3621 3.11
55000
55000
PB8TJD4P055***
14
103.60 3678 2.07
42000
50000
PB7TJD4P055***
Output Speed, rpm

Overall Ratio
PB35
1045
PB40
1550
PB50
2700
PB60
4450
PB70
7950
PB80
11350
IMPORTANT
www.renold.com
26


7.5 kW
PI
n2
Actual
M2
4P - D132SD 1435 RPM

SF
Overhung
Axial
Load
Load
Ratio
PI
7.5 kW (cont)
n2
Actual
Product Code
M2
SF
Ratio
(max.) N (max.) N
rpm
Nm
4P - D132SD 1435 RPM

Overhung
Axial
Load
Load
Product Code
rpm
Nm
(max.) N (max.) N
77
18.57
899
2.76
25000
20000
PB5SBD4P075***
13
109.11 5282 *0.81
2640
35000
PB6TJD4P075***
76
18.78
909
1.34
18000
16000
PB4SBD4P075***
12
120.37 5827 1.95
55000
55000
PB8TKD4P075***
76
18.78
909
0.93
7700
12000
PB3SBD4P075***
12
122.26 5919 1.28
42000
50000
PB7TKD4P075***
53
27.05 1310 3.18
34000
35000
PB6TCD4P075***
10
143.10 6928 1.65
55000
55000
PB8TLD4P075***
59
24.48 1185 2.22
25000
20000
PB5SCD4P075***
10
145.35 7037 1.08
42000
50000
PB7TLD4P075***
58
24.76 1199 1.12
18000
16000
PB4SCD4P075***
46
31.27 1514 1.73
25000
20000
PB5SDD4P075***
45
31.64 1532 0.94
14400
16000
PB4SDD4P075***
43
33.35 1615 2.62
34000
35000
PB6TDD4P075***
Key
n2
i
M2
SF
35
40.62 1966 1.33
25000
20000
PB5SED4P075***
36
39.56 1915 4.05
42000
50000
PB7TED4P075***
34
41.66 2017 2.12
34000
35000
PB6TED4P075***

29
49.71 2407 3.23
42000
50000
PB7TFD4P075***
27
52.35 2534 1.69
34000
35000
PB6TFD4P075***
23
61.42 2973 2.60
42000
50000
PB7TGD4P075***
22
64.69 3132 1.37
34000
35000
PB6TGD4P075***
19
76.87 3721 3.00
55000
55000
PB8THD4P075***
18
78.07 3780 2.02
42000
50000
PB7THD4P075***
17
82.23 3981 1.08
30800
35000
PB6THD4P075***
14
102.00 4938 2.28
55000
55000
PB8TJD4P075***
14
103.60 5015 1.51
42000
50000
PB7TJD4P075***
Output Speed, rpm

Overall Ratio
PB35
1045
PB40
1550
PB50
2700
PB60
4450
PB70
7950
PB80
11350
IMPORTANT
www.renold.com
27


11.0 kW
PI
n2
Actual
M2
4P - D160MD 1450 RPM

SF
Overhung
Axial
Load
Load
Ratio
Nm
Product Code
rpm
(max.) N (max.) N
78
18.57
1305 1.89
25000
20000
PB5SBD4P110***
69
21.05
1479 2.81
34000
35000
PB6TBD4P110***
59
24.48
1720 1.53
25000
20000
PB5SCD4P110***
56
25.69
1805 4.22
42000
50000
PB7TCD4P110***
54
27.05
1901 2.22
34000
35000
PB6TCD4P110***
46
31.27
2198 1.19
23900
20000
PB5SDD4P110***
46
31.66
2225 3.48
42000
50000
PB7TDD4P110***
43
33.35
2343 1.83
34000
35000
PB6TDD4P110***
36
40.62
2854 *0.92
13700
20000
PB5SED4P110***
37
39.56
2780 2.82
42000
50000
PB7TED4P110***
35
41.66
2927 1.48
34000
35000
PB6TED4P110***
30
48.94
3439 3.21
55000
55000
PB8TFD4P110***
29
49.71
3493 2.25
42000
50000
PB7TFD4P110***
28
52.35
3679 1.18
34000
35000
PB6TFD4P110***
24
60.47
4249 2.62
55000
55000
PB8TGD4P110***
24
61.42
4316 1.81
42000
50000
PB7TGD4P110***
22
64.69
4546 *0.95
21500
35000
PB6TGD4P110***
19
76.87
5402 2.09
55000
55000
PB8THD4P110***
19
78.07
5486 1.41
42000
50000
PB7THD4P110***
18
82.23
5778 *0.75
35000
PB6THD4P110***
14
102.00 7167 1.59
55000
55000
PB8TJD4P110***
14
103.60 7280 1.05
42000
50000
PB7TJD4P110***
12
120.37 8458 1.36
55000
55000
PB8TKD4P110***
12
122.26 8591 *0.89
24200
50000
PB7TKD4P110***
10
143.10 10056 1.15
55000
55000
PB8TLD4P110***
Key
n2
Output Speed, rpm
Overall Ratio
i
M2 Output Torque Nm,
Mechanical
SF Service Factory, Mechanical
For details of unit designation code
see page 13.
The overhung load shown above is
based on the maximum motor
Power being transmitted. For
higher overhung loads consult
Renold.
PB35
1045
PB40
1550
PB60
4450
PB50
2700
PB70
7950
PB80
11350
IMPORTANT
www.renold.com
28


PI
15.0 kW
n2
Actual
M2
4P - D160LD 1460 RPM

SF
Overhung
Axial
Load
Load
(max.) N
(max.) N
Ratio
rpm
Nm
79
18.57
1767 1.39
25000
20000
73
19.98
1901 3.97
42000
69
21.05
2003 2.09
60
24.48
57
PI
18.5 kW
n2
Actual
Product Code
M2
4P - D180MD 1470 RPM

SF
Ratio
Axial
Load
Load
(max.) N
(max.) N
Product Code
rpm
PB5SBD4P150***
74
19.98
2329 3.26
42000
50000
PB7TBD4P185***
50000
PB7TBD4P150***
70
21.05
2454 1.72
34000
35000
PB6TBD4P185***
34000
35000
PB6TBD4P150***
57
25.69
2995 2.58
42000
50000
PB7TCD4P185***
2329 1.13
22200
20000
PB5SCD4P150***
54
27.05
3153 1.36
34000
35000
PB6TCD4P185***
25.69
2445 3.14
42000
50000
PB7TCD4P150***
47
31.18
3635 3.00
55000
55000
PB8TDD4P185***
54
27.05
2574 1.65
34000
35000
PB6TCD4P150***
46
31.66
3691 2.13
42000
50000
PB7TDD4P185***
47
31.27
2976 *0.88
10900
20000
PB5SDD4P150***
44
33.35
3888 1.12
32200
35000
PB6TDD4P185***
46
31.66
3013 2.59
42000
50000
PB7TDD4P150***
38
38.95
4541 2.44
55000
55000
PB8TED4P185***
44
33.35
3174 1.36
34000
35000
PB6TDD4P150***
37
39.56
4612 1.72
42000
50000
PB7TED4P185***
37
38.95
3707 2.97
55000
55000
PB8TED4P150***
35
41.66
4856 *0.90
15000
35000
PB6TED4P185***
37
39.56
3765 2.10
42000
50000
PB7TED4P150***
30
48.94
5705 1.96
55000
55000
PB8TFD4P185***
35
41.66
3965 1.10
31000
35000
PB6TED4P150***
30
49.71
5795 1.37
42000
50000
PB7TFD4P185***
30
48.94
4657 2.38
55000
55000
PB8TFD4P150***
24
60.47
7049 1.60
55000
55000
PB8TGD4P185***
29
49.71
4731 1.67
42000
50000
PB7TFD4P150***
24
61.42
7160 1.10
42000
50000
PB7TGD4P185***
28
52.35
4982 *0.88
11900
35000
PB6TFD4P150***
19
76.87
8961 1.28
55000
55000
PB8THD4P185***
24
60.47
5755 1.95
55000
55000
PB8TGD4P150***
19
78.07
9101 *0.86
13500
50000
PB7THD4P185***
24
61.42
5845 1.34
42000
50000
PB7TGD4P150***
14
102.00 11890 *0.97
33600
55000
PB8TJD4P185***
19
76.87
7315 1.55
55000
55000
PB8THD4P150***
12
120.37 14032 *0.83
55000
PB8TKD4P185***
19
78.07
7430 1.05
41900
50000
PB7THD4P150***
14
102.00 9707 1.26
55000
55000
PB8TJD4P150***
14
103.60 9859 *0.98
50000
PB7TJD4P150***
12
120.37 11455 1.01
40800
55000
PB8TKD4P150***
10
143.10 13618 *0.85
55000
PB8TLD4P150***
Key
n2
i
M2
SF
PB35
1045
PB40
1550
PB50
2700
PB60
4450
PB70
7950
PB80
11350
Nm
Overhung
Output Speed, rpm

Overall Ratio

IMPORTANT
www.renold.com
29


PI
22.0 kW
n2
Actual
M2
4P - D180LD 1465 RPM

SF
Ratio
Nm
Overhung
Axial
Load
Load
rpm
73
19.98
2779 2.73
42000
50000
70
21.05
2928 1.43
34000
58
25.29
3518 3.01
57
25.69
54
37.0 kW
PI
n2
Actual
Product Code
M2
4P - D225SD 1485 RPM

SF
Overhung
Axial
Load
Load
Ratio
(max.) N (max.) N
Nm
Product Code
rpm
(max.) N (max.) N
PB7TBD4P220***
75
19.67
4540 2.21
55000
55000
PB8TBD4P370***
35000
PB6TBD4P220***
74
19.98
4611 1.67
42000
50000
PB7TBD4P370***
55000
55000
PB8TCD4P220***
71
21.05
4858 *0.88
31200
35000
PB6TBD4P370***
3573 2.15
42000
50000
PB7TCD4P220***
59
25.29
5837 1.84
55000
55000
PB8TCD4P370***
27.05
3763 1.13
34000
35000
PB6TCD4P220***
58
25.69
5929 1.32
42000
50000
PB7TCD4P370***
47
31.18
4337 2.51
55000
55000
PB8TDD4P220***
48
31.18
7196 1.53
55000
55000
PB8TDD4P370***
46
31.66
4404 1.78
42000
50000
PB7TDD4P220***
47
31.66
7307 1.09
42000
50000
PB7TDD4P370***
44
33.35
4639 *0.93
19700
35000
PB6TDD4P220***
38
38.95
8989 1.24
55000
55000
PB8TED4P370***
38
38.95
5418 2.04
55000
55000
PB8TED4P220***
38
39.56
9130 *0.88
50000
PB7TED4P370***
37
39.56
5503 1.44
42000
50000
PB7TED4P220***
30
48.94
6808 1.64
55000
55000
PB8TFD4P220***
29
49.71
6915 1.15
42000
50000
PB7TFD4P220***
24
60.47
8411 1.34
55000
55000
PB8TGD4P220***
24
61.42
8544 *0.92
25000
50000
PB7TGD4P220***
19
76.87 10693 1.06
51900
55000
PB8THD4P220***
14
102.00 14188 *0.81
55000
PB8TJD4P220***

PI
30.0 kW
n2
Actual
M2
4P - D200LD 1480 RPM

SF
Ratio
rpm
Nm
Overhung
Axial
Load
Load
PB35
1045
PB40
1550
PB50
2700
PB60
4450
PB70
7950
PB80
11350
Product Code
(max.) N (max.) N
75
19.67 3693 2.71
55000
55000
PB8TBD4P300***
74
19.98 3751 2.04
42000
50000
PB7TBD4P300***
70
21.05 3952 1.07
31200
35000
PB6TBD4P300***
59
25.29 4748 2.26
55000
55000
PB8TCD4P300***
58
25.69 4824 1.61
42000
50000
PB7TCD4P300***
55
27.05 5079 *0.85
9300
35000
PB6TCD4P300***
47
31.18 5854 1.87
55000
55000
PB8TDD4P300***
47
31.66 5944 1.33
42000
50000
PB7TDD4P300***
38
38.95 7313 1.52
55000
55000
PB8TED4P300***
37
39.56 7428 1.08
41900
50000
PB7TED4P300***
Key
n2
i
M2
SF
Output Speed, rpm

Overall Ratio

IMPORTANT
www.renold.com
30


PI
45.0 kW
n2
Actual
M2
4P - D225MD 1480 RPM

SF
Ratio
Nm
Overhung
Axial
Load
Load
75.0 kW
PI
n2
Actual
Product Code
M2
D280SD 1480 RPM

SF
Overhung
Axial
Load
Load
Ratio
(max.) N (max.) N
Product Code
rpm
75
19.67
5540 1.80
55000
55000
PB8TBD4P450***
75
19.67 9233 1.08
55000
55000
PB8TBD4P750***
74
19.98
5627 1.36
42000
50000
PB7TBD4P450***
74
19.98 9379 *0.82
50000
PB7TBD4P750***
59
25.29
7123 1.50
55000
55000
PB8TCD4P450***
59
25.29 11871 *0.90
34400
55000
PB8TCD4P750***
58
25.69
7235 1.07
42000
50000
PB7TCD4P450***
47
31.18
8782 1.25
55000
55000
PB8TDD4P450***
47
31.66
8917 *0.89
17700
50000
PB7TDD4P450***
38
38.95 10970 *1.02
36000
55000
PB8TED4P450***
rpm
Nm
(max.) N (max.) N
PB35
1045
PI
55.0 kW
n2
Actual
M2
Ratio
rpm
Nm
Overhung
Axial
Load
Load
PB50
2700
PB60
4450
PB70
7950
PB80
11350
4P - D250MD 1480 RPM

SF
PB40
1550

Product Code
(max.) N (max.) N
75
19.67 6771 1.48
55000
55000
PB8TBD4P550***
74
19.98 6878 1.11
42000
50000
PB7TBD4P550***
59
25.29 8705 1.23
55000
55000
PB8TCD4P550***
58
25.69 8843 *0.88
19200
50000
PB7TCD4P550***
47
31.18 10733 1.02
40100
55000
PB8TDD4P550***
38
38.95 13408 *0.83
55000
PB8TED4P550***
Key
n2
i
M2
SF
Output Speed, rpm

Overall Ratio

IMPORTANT
www.renold.com
31

PM Series - PB Type - Motorised Unit - Dimensions

T
S1 (NO BACKSTOP FITTED)
S
H3
H2
C2
S2 (BACKSTOP FITTED)
C2
J
RENOLD
B1
D2
D2
H5
H4
B2
J
R
H1
Q
L
W2
V2
LB
OUTPUT SLEEVE
DETAILS
PM Series - PB Motorised
UNIT REF
PB35
PB40
PB50
PB60
PB70
PB80
B
162.0
179.3
183.9
239.6
269.0
278.8
B1
140.0
157.5
195.0
225.0
255.5
280.0
B2
180
210
240
280
335
370
H
60
88
88
120
140
140
UNIT REF
Motor
PB35
PB40
PB50
PB60
PB70
PB80
75
85
100
125
150
150
17.0
21.5
21.5
25.5
25.5
25.5
274
321
365
418
458
503
186
220
250
305
360
360
PB35
PB40
PB50
PB60
PB70
PB80
D80D
S1 S2
0 n/a
0 n/a
0 n/a
n/a n/a
n/a n/a
n/a n/a
D90D
S1 S2
0 n/a
0 n/a
0 n/a
n/a n/a
n/a n/a
n/a n/a
D100D
S1 S2
11 81
11 81
11 81
0 70
0 70
0 70
D112D
S1 S2
11
81
11
81
11
81
0
70
0
70
0
70
UNIT REF
PB35
PB40
PB50
PB60
PB70
PB80
G
40F7
50F7
60F7
70F7
90F7
100F7
L
103
110
130
155
174
174
LB
65
75
95
130
125
115
V2
43.3
53.8
64.4
74.9
95.4
106.4
UNIT REF
H1
135
180
180
235
290
310
H2
85
105
125
145
160
170
S
S
D80-D200 D225-D280
264
290
310
365
445
380
460
404
484
H3
160
200
230
270
310
340
H4
120
140
160
190
240
256
130
151
175
200
225
246
25
25
30
35
35
35
D132D
D160D
D180D
S1 S2 S1 S2 S1 S2
30 125 30 125 30 125 41 171 22 117 30 160 30 160
22 117 30 160 30 160
22 117 30 160 30 160
H5
205
235
280
340
412
460
D200D
D225D
D250D
S1 S2 S1 S2 S1
S2
30 160 0 n/a 30 160 0 n/a 33 n/a
30 160 0 n/a 33 n/a
Plug-in Output Shaft

W2
12Js9
14Js9
18Js9
20Js9
25Js9
28Js9
www.renold.com
32
UNIT REF
PB35
PB40
PB50
PB60
PB70
PB80
C2
190
220
260
305
355
355
D2-SE
40k6
50k6
60m6
70m6
85m6
95m6
D2-DE
39k6
49k6
59m6
69m6
85m6
95m6

`8' HOLES
`K1' DIA. ON A
`M' PCD
C2
T
C3
E
U1
B1
D2
B2
D2 N O
B
U2
Q
W2
V2
LB
OUTPUT SLEEVE
DETAILS
PM Series - PB Motorised - (Horizontal Flange Mounted)

UNIT REF
PB35
PB40
PB50
PB60
PB70
PB80
B
162.0
179.3
183.9
239.6
269.0
278.8
B1
140.0
157.5
195.0
225.0
255.5
280.0
UNIT REF
Motor
PB35
PB40
PB50
PB60
PB70
PB80
274
321
365
418
458
503
186
220
250
305
360
360
D80D
S1 S2
0 n/a
0 n/a
0 n/a
n/a n/a
n/a n/a
n/a n/a
D90D
S1 S2
0 n/a
0 n/a
0 n/a
n/a n/a
n/a n/a
n/a n/a
D100D
S1 S2
11 81
11 81
11 81
0 70
0 70
0 70
D112D
S1 S2
11
81
11
81
11
81
0
70
0
70
0
70
L
103
110
130
155
174
174
LB
65
75
95
130
125
115
V2
43.3
53.8
64.4
74.9
95.4
106.4
UNIT REF
PB35
PB40
PB50
PB60
PB70
PB80
B2
180
210
240
280
335
370
E
154
183
197
215
248
248
S
S
D80-D200 D225-D280
264
290
310
365
445
380
460
404
484
K1
13.5
17.5
17.5
17.5
17.5
17.5
M
265
300
350
400
500
500
N
230h8
250h8
300h8
350h8
450h8
450h8
U1
U2
130
151
175
200
225
246
13
19
19
19
24
24
4
5
5
5
5
5
D132D
D160D
D180D
S1 S2 S1 S2 S1 S2
30 125 30 125 30 125 41 171 22 117 30 160 30 160
22 117 30 160 30 160
22 117 30 160 30 160
Output Sleeve
UNIT REF
PB35
PB40
PB50
PB60
PB70
PB80
O
300
350
400
450
550
550
D200D
D225D
D250D
D280D
S1 S2 S1 S2 S1
S2 S1
S2
30 160 0 n/a 30 160 0 n/a 33 n/a 33
n/a
30 160 0 n/a 33 n/a 33
n/a

G
40F7
50F7
60F7
70F7
90F7
100F7
W2
12Js9
14Js9
18Js9
20Js9
25Js9
28Js9
www.renold.com
33
UNIT REF
PB35
PB40
PB50
PB60
PB70
PB80
C2
190
220
260
305
355
355
D2-SE
40k6
50k6
60m6
70m6
85m6
95m6
D2-DE
39k6
49k6
59m6
69m6
85m6
95m6

`8' HOLES
`K1' DIA. ON A
`M' PCD

B1
L
B2
W2
B
V2
G
Q
LB
D2
OUTPUT SLEEVE
DETAILS
C2
R
E
C3
U1
U2
D2
N
O
PM Series - PB Motorised - (Vertical Skirt)

UNIT REF
PB35
PB40
PB50
PB60
PB70
PB80
B
162.0
179.3
183.9
239.6
269.0
278.8
B1
140.0
157.5
195.0
225.0
255.5
280.0
B2
180
210
240
280
335
370
UNIT REF
Motor
PB35
PB40
PB50
PB60
PB70
PB80
134
159
184
199
225
246
274
321
365
418
458
503
186
220
250
305
360
360
D80D
S1 S2
0 n/a
0 n/a
0 n/a
n/a n/a
n/a n/a
n/a n/a
D90D
S1 S2
0 n/a
0 n/a
0 n/a
n/a n/a
n/a n/a
n/a n/a
D100D
S1 S2
11 81
11 81
11 81
0 70
0 70
0 70
D112D
S1 S2
11
81
11
81
11
81
0
70
0
70
0
70
L
103
110
130
155
174
174
LB
65
75
95
130
125
115
V2
43.3
53.8
64.4
74.9
95.4
106.4
UNIT REF
PB35
PB40
PB50
PB60
PB70
PB80
E
154
183
197
215
248
248
K1
13.5
17.5
17.5
17.5
17.5
17.5
S
S
D80-D200 D225-D280
264
290
310
365
445
380
460
404
484
N
230h8
250h8
300h8
350h8
450h8
450h8
O
300
350
400
450
550
550
U1
U3
130
151
175
200
225
246
13
19
19
19
24
24
5
6
6
6
6
6
D132D
D160D
D180D
S1 S2 S1 S2 S1 S2
30 125 30 125 30 125 41 171 22 117 30 160 30 160
22 117 30 160 30 160
22 117 30 160 30 160
Output Sleeve
UNIT REF
PB35
PB40
PB50
PB60
PB70
PB80
M
265
300
350
400
500
500
D200D
D225D
D250D
S1 S2 S1 S2 S1
S2
30 160 0 n/a 30 160 0 n/a 33 n/a
30 160 0 n/a 33 n/a

G
40F7
50F7
60F7
70F7
90F7
100F7
W2
12Js9
14Js9
18Js9
20Js9
25Js9
28Js9
www.renold.com
34
UNIT REF
PB35
PB40
PB50
PB60
PB70
PB80
C2
190
220
260
305
355
355
D2-SE
40k6
50k6
60m6
70m6
85m6
95m6
D2-DE
39k6
49k6
59m6
69m6
85m6
95m6
PM Series - PB Type - Output Shaft Dimensions

L2
L1
C2
Z2
Z3
Y2
C2
Y3
Z3
Y2
Z2
Y3
Y5
D4 D3
D2
D5
D5
L
L
X2
X2
GL
GL
L3
L4
C3
Y2
Z3
X5
DOUBLE EXTENSION PLUG-IN SHAFT
SINGLE EXTENSION PLUG-IN SHAFT
Z2
Z5
D4 D3
C3
Y3
Z2
Y2
Z3
Y3
Y5
D4 D3
Z5
D4 D3
D2
D5
D5
L5
L5
X2
GL
X2
SINGLE EXTENSION PLUG-IN SHAFT - (FLANGED)

V2
W2
GL
X5
DOUBLE EXTENSION PLUG-IN SHAFT - (FLANGED)
V5 TH5
TH
W5
GD
GW
D2 EXTENSION D5 EXTENSION
EXTENSION KEYWAY DETAILS
CIRCLIP GROOVE DETAILS
Plug-in Shafts
UNIT REF
PB35
C2
190
C3
234
L
7
L1
300.5
L2
380
L3
344.5
L4
424
L5
51
PB40
220
283
10
337.5
440
400.5
503
73
PB50
260
317
10
398.5
520
455.5
577
67
PB60
305
355
10
469.5
610
519.5
660
60
PB70
355
418
11
538.5
710
601.5
773
74
PB80
355
418
11
538.5
710
601.5
773
74
UNIT REF
PB35
PB40
PB50
PB60
PB70
PB80
D2
40k6
50k6
60m6
70m6
85m6
95m6
V2
35.00
44.50
53.00
62.50
76.00
86.00
W2
12P9
14P9
18P9
20P9
22P9
25P9
X2
80
100
120
140
170
170
Y2
70
90
110
125
160
160
Z2
5
5
5
5
5
5
TH
M16x36
M16x36
M20x42
M20x42
M20x42
M24x50
D3
40h6
50h6
60h6
70h6
90h6
100h6
UNIT REF
PB35
PB40
PB50
PB60
PB70
PB80
D4
38
48
58
68
88
96
D5
39k6
49k6
59m6
69m6
85m6
95m6
V5
34.00
43.50
52.00
61.50
76.00
86.00
W5
12P9
14P9
18P9
20P9
22P9
25P9
X5
80
100
120
140
170
170
Y5
70
90
110
125
160
160
Z5
5
5
5
5
5
5
TH5
M16x36
M16x36
M20x42
M20x42
M20x42
M24x50
www.renold.com
35
GD
37.50
37.25
47.00
46.75
57.00
56..7
67.00
66.70
86.50
86.15
96.50
96.15
GL
207.65
207.60
222.15
222.10
262.15
262.10
312.65
312.60
351.15
351.10
351.15
351.10
Y3
63
80
100
125
140
125 *
Z3
3
3
3
3
3
3
*Two Keys
GW
1.99
1.85
2.29
2.15
2.29
2.15
2.79
2.65
3.33
3.15
3.33
3.15
PM Series - PB Type - Overhung/Axial Load Capacities

PM SERIES PB - HELICAL/BEVEL/HELICAL
Overhung Load Capacities @ 1500 RPM Nominal Input Speed
Ratio
20
25
32
40
50
63
80
100
125
160
Output
Speed
75
60
47
38
30
24
19
15
12
9
PB35
9000
9000
9000
9000
9000
9000
9000
9000
9000
9000
PB40
18000
17900
16300
15000
15000
15000
15000
15000
15000
15000
Gear Unit Size

PB50
PB60
20500
27700
17800
26900
17800
25900
17800
25100
17800
25100
17800
25100
17800
25100
17800
25100
17800
25100
17800
25100
PB70
35100
33500
31800
30400
30400
31000
32200
32700
33100
32900
PB80
51100
42400
38600
36500
35000
33300
31100
29200
27900
26500
Gear Unit Size

PB50
PB60
20000
35000
20000
35000
20000
35000
20000
35000
20000
35000
20000
35000
20000
35000
20000
35000
20000
35000
20000
35000
PB70
50000
50000
50000
50000
50000
50000
50000
50000
50000
50000
PB80
55000
55000
55000
55000
55000
55000
55000
55000
55000
55000
- based on Gear Unit transmitting Mechanical Rating
PM SERIES PB - HELICAL/BEVEL/HELICAL
Axial Load Capacities
Ratio
20
25
32
40
50
63
80
100
125
160
Output
Speed
75
60
47
38
30
24
19
15
12
9
PB35
12000
12000
12000
12000
12000
12000
12000
12000
12000
12000
PB40
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
- based on Gear Unit transmitting Mechanical Rating
www.renold.com
36
PM Series - PB Type - Exact Ratio

PM Series PB Helical/Bevel/Helical Actual Ratios
PB35/40
Bevel
Helical
R10
20
25
32
40
50
63
80
100
125
160
Pinion
51
44
38
32
29
24
20
16
13
11
Wheel
51
58
64
70
73
78
82
86
89
91
Pinion
11
11
11
11
11
11
11
11
11
11
Pinion
51
44
38
32
29
24
20
16
13
11
Wheel
51
58
64
70
73
78
82
86
89
91
Pinion
11
11
11
11
11
11
11
11
11
11
Pinion
38
33
29
25
27
23
19
15
13
13
Wheel
43
48
52
56
76
80
84
88
90
107
Pinion
11
11
11
11
11
11
11
11
11
11
Pinion
38
33
29
25
27
23
19
15
13
13
Wheel
43
48
52
56
76
80
84
88
90
107
Pinion
11
11
11
11
11
11
11
11
11
11
Pinion
38
33
29
25
27
23
19
15
13
13
Wheel
37
37
37
37
37
37
37
37
37
37
Pinion
17
17
17
17
17
17
17
17
17
17
Wheel
37
37
37
37
37
37
37
37
37
37
Pinion
16
16
16
16
16
16
16
16
16
16
Wheel
43
48
52
56
76
80
84
88
90
107
Pinion
11
11
11
11
11
11
11
11
11
11
Wheel
36
36
36
36
36
36
36
36
36
36
Pinion
16
16
16
16
16
16
16
16
16
16
Overall Ratio
18.78
24.76
31.64
41.09
47.28
61.05
77.01
100.96
128.60
155.40
Wheel
86
86
86
86
86
86
86
86
86
86
Overall Ratio
18.57
24.48
31.27
40.62
46.74
60.35
76.13
99.80
127.12
153.61
Wheel
94
94
94
94
94
94
94
94
94
94
Overall Ratio
21.05
27.05
33.35
41.66
52.35
64.69
82.23
109.11
128.76
153.08
Wheel
84
84
84
84
84
84
84
84
84
84
Overall Ratio
19.98
25.69
31.66
39.56
49.71
61.42
78.07
103.60
122.26
145.35
Wheel
85
85
85
85
85
85
85
85
85
85
Overall Ratio
19.67
25.29
31.18
38.95
48.94
60.47
76.87
102.00
120.37
143.10
Helical
Helical
Helical
www.renold.com
37
Wheel
87
87
87
87
87
87
87
87
87
87
Helical
PB80
Bevel
Helical
R10
20
25
32
40
50
63
80
100
125
160
Pinion
16
16
16
16
16
16
16
16
16
16
PB70
Bevel
Helical
R10
20
25
32
40
50
63
80
100
125
160
Wheel
38
38
38
38
38
38
38
38
38
38
PB60
Bevel
Helical
R10
20
25
32
40
50
63
80
100
125
160
Pinion
16
16
16
16
16
16
16
16
16
16
PB50
Bevel
Helical
R10
20
25
32
40
50
63
80
100
125
160
Helical
Wheel
38
38
38
38
38
38
38
38
38
38
PM Series - PB Type - Selection Data

Mineral and Synthetic Oils
Nominal ratio: 20/1
Product Code
Input Nominal
rpm
Actual Ratio
Helical 51/51
Helical 51/51
Helical 51/51
Helical 38/43
Helical 38/43
Output
Bevel 11/38
Bevel 11/38
Bevel 11/38
Bevel 11/37
Bevel 11/37
Bevel 11/36
rpm
Helical 16/87
Helical 16/87
Helical 16/86
Helical 17/94
Helical 16/84
Helical 16/85
18.78
18.78
18.57
21.05
19.98
19.67
Actual Output Speed. rpm
95.8
95.8
96.9
85.5
90.1
91.5
Input kW. Mechanical
8.79
11.7
24.2
38.1
73.7
94.7
Output Torque Nm. Mechanical
850
1135
2315
4130
7580
9585
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
Actual Output Speed. rpm
79.9
79.9
80.8
71.3
75.1
76.3
Input kW, Mechanical
7.33
10.3
21.4
33.0
62.9
83.4
850
1200
2450
4295
7755
10125
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
Actual Output Speed, rpm
63.9
63.9
64.6
57.0
60.1
61.0
5.86
8.86
18.2
26.8
51.1
71.3
850
1285
2615
4355
7875
10825
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
53.2
53.2
53.9
47.5
50.1
50.8
4.89
7.79
15.3
22.6
43.0
60.8
850
1355
2625
4400
7965
11075
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
39.9
39.9
40.4
35.6
37.5
38.1
3.66
6.38
11.4
17.2
32.8
46.4
850
1480
2615
4470
8100
11270
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
26.6
26.6
26.9
23.8
25.0
25.4
2.44
4.31
7.63
11.5
21.8
31.6
850
1500
2625
4485
8070
11515
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
13.3
13.3
13.5
11.9
12.5
12.7
1.22
2.16
3.82
5.75
10.7
16.3
850
1500
2625
4485
7910
11860
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
Overall Ratio
1800
1500
1200
1000
750
500
250
PB3REDXXXSB*** PB4REDXXXSB*** PB5REDXXXSB*** PB6REDXXXTB*** PB7REDXXXTB*** PB8REDXXXTB***
90.0
75.0
60.0
50.0
37.5
25.0
12.5
Helical 38/43
IMPORTANT
www.renold.com
38


Nominal ratio: 25/1
Product Code
Input Nominal
rpm
Actual Ratio
Helical 44/58
Helical 44/58
Helical 44/58
Helical 33/48
Helical 33/48
Output
Bevel 11/38
Bevel 11/38
Bevel 11/38
Bevel 11/37
Bevel 11/37
Bevel 11/36
rpm
Helical 16/87
Helical 16/87
Helical 16/86
Helical 17/94
Helical 16/84
Helical 16/85
24.76
24.76
24.48
27.05
25.69
25.29
72.7
72.7
73.5
66.5
70.1
71.2
6.67
9.8
20.8
31.0
58.9
79.0
850
1255
2625
4310
7785
10275
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
60.6
60.6
61.3
55.0
58.4
59.3
5.56
8.67
17.4
26.1
49.7
69.5
850
1325
2625
4360
7880
10855
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
48.5
48.5
49.0
44.0
46.7
47.4
4.45
7.43
13.9
21.1
40.3
56.9
850
1420
2625
4415
7990
11110
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
40.4
40.4
40.8
30.0
38.9
39.5
3.71
6.52
11.6
17.8
33.9
48.0
850
1495
2625
4460
8075
11235
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
30.3
30.3
30.6
27.7
29.2
29.7
2.78
4.91
8.68
13.4
25.6
36.5
850
1500
2625
4485
8110
11415
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
20.2
20.2
20.4
18.5
19.5
19.8
1.85
3.27
5.79
8.95
16.8
24.8
850
1500
2625
4485
7990
11640
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
10.1
10.1
10.2
9.2
9.7
9.9
0.93
1.64
2.89
4.47
8.34
12.8
850
1500
2625
4485
7940
11955
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
Overall Ratio
1800
1500
1200
1000
750
500
250
PB3REDXXXSC*** PB4REDXXXSC*** PB5REDXXXSC*** PB6REDXXXTC*** PB7REDXXXTC*** PB8REDXXXTC***
72.0
60.0
48.0
40.0
30.0
20.0
10.0
Helical 33/48
IMPORTANT
www.renold.com
39


Nominal ratio: 32/1
Product Code
Input Nominal
rpm
Actual Ratio
Helical 38/64
Helical 38/64
Helical 38/64
Helical 29/52
Helical 29/52
Output
Bevel 11/38
Bevel 11/38
Bevel 11/38
Bevel 11/37
Bevel 11/37
Bevel 11/36
rpm
Helical 16/87
Helical 16/87
Helical 16/86
Helical 17/94
Helical 16/84
Helical 16/85
31.64
31.64
31.27
33.35
31.66
31.18
56.9
56.9
57.6
54.0
56.9
57.7
5.22
8.29
16.3
25.5
48.6
68.6
850
1350
2625
4380
7925
11015
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
47.4
47.4
48.0
45.0
47.4
48.1
4.35
7.29
13.6
21.5
41.0
57.9
850
1425
2625
4425
8015
11145
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
37.9
37.9
38.4
36.0
37.9
38.5
3.48
6.14
10.9
17.4
33.2
46.9
850
1500
2625
4480
8115
11290
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
31.6
31.6
32.0
30.0
31.6
32.1
2.90
5.12
9.06
14.5
27.7
39.5
850
1500
2625
4485
8115
11405
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
23.7
23.7
24.0
22.5
23.7
24.1
2.18
3.84
6.80
10.9
20.5
30.0
850
1500
2625
4485
8020
11570
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
15.8
15.8
16.0
15.0
15.8
16.0
1.45
2.56
4.53
7.26
13.5
20.4
850
1500
2625
4485
7940
11775
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
Overall Ratio
1800
1500
1200
1000
750
500
250
PPB3REDXXXSD*** PB4REDXXXSD*** PB5REDXXXSD*** PB6REDXXXTD*** PB7REDXXXTD*** PB8REDXXXTD***
56.3
46.9
37.5
31.3
23.4
15.6
7.8
Helical 29/52
7.9
7.9
8.0
7.5
7.9
8.0
Input kW. Mechanical
0.73
1.28
2.27
3.63
7.35
10.4
850
1500
2625
4485
8625
12060
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
IMPORTANT
www.renold.com
40


Nominal ratio: 40/1
Product Code
Input Nominal
rpm
Actual Ratio
Helical 32/70
Helical 32/70
Helical 32/70
Helical 25/56
Helical 25/56
Output
Bevel 11/38
Bevel 11/38
Bevel 11/38
Bevel 11/37
Bevel 11/37
Bevel 11/36
rpm
Helical 16/87
Helical 16/87
Helical 16/86
Helical 17/94
Helical 16/84
Helical 16/85
41.09
41.09
40.62
41.66
39.56
38.95
43.8
43.8
44.3
43.2
45.5
46.2
4.02
7.09
12.6
20.7
39.5
55.8
850
1500
2625
4435
8035
11175
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
36.5
36.5
36.9
36.0
37.9
38.5
3.35
5.91
10.5
17.4
33.2
47
850
1500
2625
4480
8115
11295
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
29.2
29.2
29.5
28.8
30.3
30.8
2.68
4.73
8.37
13.9
26.5
38.0
850
1500
2625
4485
8100
11430
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
24.3
24.3
24.6
24.0
25.3
25.7
2.23
3.94
6.98
11.6
22.0
32.0
850
1500
2625
4485
8060
11535
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
18.3
18.3
18.5
18.0
19.0
19.3
1.67
2.96
5.23
8.72
16.3
24.3
850
1500
2625
4485
7975
11690
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
12.2
12.2
12.3
12.0
12.6
12.8
1.12
1.97
3.49
5.81
10.8
16.5
850
1500
2625
4485
7905
11880
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
Overall Ratio
1800
1500
1200
1000
750
500
250
PB3REDXXXSE*** PB4REDXXXSE*** PB5REDXXXSE*** PB6REDXXXSE*** PB7REDXXXSE*** PB8REDXXXSE***
45.0
37.5
30.0
25.0
18.8
12.5
6.3
Helical 25/56
6.1
6.1
6.2
6.0
6.3
6.4
0.56
0.99
1.74
2.91
5.84
8.41
850
1500
2625
4485
8555
12135
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
IMPORTANT
www.renold.com
41


Nominal ratio: 50/1
Product Code
PB3REDXXXSF***
PB7REDXXXTF***
PB8REDXXXTF***
Actual Ratio
Helical 29/73
Helical 29/73
Helical 29/73
Helical 27/76
Helical 27/76
Helical 27/76
Output
Bevel 11/38
Bevel 11/38
Bevel 11/38
Bevel 11/37
Bevel 11/37
Bevel 11/36
rpm
Helical 16/87
Helical 16/87
Helical 16/86
Helical 17/94
Helical 16/84
Helical 16/85
47.28
47.28
46.74
52.35
49.71
48.94
38.1
38.1
38.5
34.4
36.2
36.8
3.49
6.17
10.9
16.6
31.7
44.8
850
1500
2625
4480
8115
11290
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
31.7
31.7
32.1
28.7
30.2
30.6
2.91
5.14
9.09
13.9
26.4
37.7
850
1500
2625
4485
8115
11405
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
25.4
25.4
25.7
22.9
24.1
24.5
2.33
4.11
7.28
11.1
21.0
30.5
850
1500
2625
4485
8060
11535
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
21.2
21.2
21.4
19.1
20.1
20.4
1.94
3.43
6.06
9.25
17.4
25.7
850
1500
2625
4485
7995
11630
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
15.9
15.9
16.0
14.3
15.1
15.3
1.46
2.57
4.55
6.94
12.9
19.5
850
1500
2625
4485
7940
11775
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
10.6
10.6
10.7
9.6
10.1
10.2
0.97
1.71
3.03
4.62
8.61
13.2
850
1500
2625
4485
7925
11950
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
Input Nominal
rpm
Overall Ratio
1800
1500
1200
1000
750
500
250
36.0
30.0
24.0
20.0
15.0
10.0
5.0
PB4REDXXXSF*** PB5REDXXXSF*** PB6REDXXXTF***
5.3
5.3
5.3
4.8
5.0
5.1
0.49
0.86
1.52
2.31
4.74
6.73
850
1500
2625
4485
8725
12195
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
IMPORTANT
www.renold.com
42


Nominal ratio: 63/1
Product Code
Input Nominal
rpm
Actual Ratio
Helical 24/78
Helical 24/78
Helical 24/78
Helical 23/80
Helical 23/80
Output
Bevel 11/38
Bevel 11/38
Bevel 11/38
Bevel 11/37
Bevel 11/37
Bevel 11/36
rpm
Helical 16/87
Helical 16/87
Helical 16/86
Helical 17/94
Helical 16/84
Helical 16/85
61.05
61.05
60.35
64.69
61.42
60.47
29.5
29.5
29.8
27.8
29.3
29.8
2.71
4.77
8.45
13.5
25.7
36.7
850
1500
2625
4485
8110
11410
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
24.6
24.6
24.9
23.2
24.4
24.8
2.25
3.98
7.04
11.2
21.3
30.8
850
1500
2625
4485
8070
11515
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
19.7
19.7
19.9
18.6
19.5
19.8
1.80
3.18
5.63
8.98
16.9
24.9
850
1500
2625
4485
7995
11640
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
16.4
16.4
16.6
15.5
16.3
16.5
1.50
2.65
4.70
7.48
14.0
20.9
850
1500
2625
4485
7960
11730
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
12.3
12.3
12.4
11.6
12.2
12.4
1.13
1.99
3.52
5.61
10.4
15.9
850
1500
2625
4485
7910
11860
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
Overall Ratio
1800
1500
1200
1000
750
500
250
PB3REDXXXSG*** PB4REDXXXSG*** PB5REDXXXSG*** PB6REDXXXTG*** PB7REDXXXTG*** PB8REDXXXTG***
28.6
23.8
19.0
15.9
11.9
7.9
4.0
Helical 23/80
8.2
8.2
8.3
7.7
8.1
8.3
0.75
1.33
2.35
3.74
7.17
10.7
850
1500
2625
4485
8160
12025
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
4.1
4.1
4.1
3.9
4.1
4.1
0.38
0.66
1.17
1.87
3.85
5.47
850
1500
2625
4485
8765
12250
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
IMPORTANT
www.renold.com
43


Nominal ratio: 80/1
Product Code
Input Nominal
rpm
Actual Ratio
Helical 20/82
Helical 20/82
Helical 20/82
Helical 19/84
Helical 19/84
Output
Bevel 11/38
Bevel 11/38
Bevel 11/38
Bevel 11/37
Bevel 11/37
Bevel 11/36
rpm
Helical 16/87
Helical 16/87
Helical 16/86
Helical 17/94
Helical 16/84
Helical 16/85
77.01
77.01
76.13
82.23
78.07
76.87
23.4
23.4
23.6
21.9
23.1
23.4
2.14
3.79
6.70
10.6
20.0
29.2
850
1500
2625
4485
8025
11560
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
19.5
19.5
19.7
18.2
19.2
19.5
1.79
3.15
5.58
8.83
16.6
24.6
850
1500
2625
4485
7985
11660
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
15.6
15.6
15.8
14.6
15.4
15.6
1.43
2.52
4.47
7.07
13.2
19.8
850
1500
2625
4485
7945
11765
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
13.0
Overall Ratio
1800
1500
1200
1000
750
500
250
PB3REDXXXSH*** PB4REDXXXSH*** PB5REDXXXSH*** PB6REDXXXTH*** PB7REDXXXTH*** PB8REDXXXTH***
22.5
18.8
15.0
12.5
9.4
6.3
3.1
Helical 19/84
13.0
13.0
13.1
12.2
12.8
1.19
2.10
3.72
5.89
10.9
16.6
850
1500
2625
4485
7915
11850
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
9.7
9.7
9.9
9.1
9.6
9.8
0.89
1.58
2.79
4.42
8.27
12.6
850
1500
2625
4485
7975
11970
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
6.5
6.5
6.6
6.1
6.4
6.5
0.60
1.05
1.86
2.94
5.87
8.51
850
1500
2625
4485
8485
12115
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
3.2
3.2
3.3
3.0
3.2
3.3
0.30
0.53
0.93
1.47
3.05
4.32
850
1500
2625
4485
8810
12310
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
IMPORTANT
www.renold.com
44


Nominal ratio: 100/1
Product Code
Input Nominal
rpm
Actual Ratio
Helical 16/86
Helical 16/86
Helical 16/86
Helical 15/88
Helical 15/88
Output
Bevel 11/38
Bevel 11/38
Bevel 11/38
Bevel 11/37
Bevel 11/37
Bevel 11/36
rpm
Helical 16/87
Helical 16/87
Helical 16/86
Helical 17/94
Helical 16/84
Helical 16/85
100.96
100.96
99.80
109.11
103.60
102.00
17.8
17.8
18.0
16.5
17.4
17.6
1.64
2.89
5.11
7.99
14.9
22.3
850
1500
2625
4485
7970
11695
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
14.9
14.9
15.0
13.7
14.5
14.7
1.36
2.41
4.26
6.66
12.4
18.7
850
1500
2625
4485
7940
11785
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
11.9
11.9
12.0
11.0
11.6
11.8
1.09
1.92
3.41
5.33
9.9
15.1
850
1500
2625
4485
7905
11885
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
Overall Ratio
1800
1500
1200
1000
750
500
250
PB3REDXXXSJ*** PB4REDXXXSJ*** PB5REDXXXSJ*** PB6REDXXXTJ*** PB7REDXXXTJ*** PB8REDXXXTJ***
18.0
15.0
12.0
10.0
7.5
5.0
2.5
Helical 15/88
9.9
9.9
10.0
9.2
9.7
9.8
0.91
1.60
2.84
4.44
8.28
12.7
850
1500
2625
4485
7945
11960
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
7.4
7.4
7.5
6.9
7.2
7.4
0.68
1.20
2.13
3.33
6.48
9.58
850
1500
2625
4485
8285
12065
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
5.0
5.0
5.0
4.6
4.8
4.9
0.45
0.80
1.42
2.22
4.55
6.46
850
1500
2625
4485
8730
12200
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
2.5
2.5
2.5
2.3
2.4
2.5
0.23
0.40
0.71
1.11
2.31
3.26
850
1500
2625
4485
8850
12310
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
IMPORTANT
www.renold.com
45


Product Code
Input Nominal
rpm
Actual Ratio
Helical 13/89
Helical 13/89
Helical 13/89
Helical 13/90
Helical 13/90
Output
Bevel 11/38
Bevel 11/38
Bevel 11/38
Bevel 11/37
Bevel 11/37
Bevel 11/36
rpm
Helical 16/87
Helical 16/87
Helical 16/86
Helical 17/94
Helical 16/84
Helical 16/85
128.60
128.60
127.12
128.76
122.26
120.37
14.0
14.0
14.2
14.0
14.7
15.0
1.28
2.27
4.01
6.77
12.6
19.0
850
1500
2625
4485
7940
11780
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
11.7
11.7
11.8
11.6
12.3
12.5
1.07
1.89
3.34
5.64
10.5
16.0
850
1500
2625
4485
7910
11865
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
10.0
Overall Ratio
1800
1500
1200
1000
750
500
250
PB3REDXXXSK*** PB4REDXXXSK*** PB5REDXXXSK*** PB6REDXXXTK*** PB7REDXXXTK*** PB8REDXXXTK***
14.4
12.0
9.6
8.0
6.0
4.0
2.0
Helical 13/90
9.3
9.3
9.4
9.3
9.8
0.86
1.51
2.68
4.51
8.41
12.9
850
1500
2625
4485
7940
11955
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
7.8
7.8
7.9
7.8
8.2
8.3
0.71
1.26
2.23
3.76
7.21
10.8
850
1500
2625
4485
8165
12025
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
5.8
5.8
5.9
5.8
6.1
6.2
0.54
0.94
1.67
2.82
5.64
8.16
850
1500
2625
4485
8520
12125
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
3.9
3.9
3.9
3.9
4.1
4.2
0.36
0.63
1.11
1.88
3.87
5.49
850
1500
2625
4485
8765
12250
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
1.9
1.9
2.0
1.9
2.0
2.1
0.18
0.31
0.56
0.94
1.96
2.76
850
1500
2625
4485
8875
12310
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
IMPORTANT
www.renold.com
46


Product Code
Input Nominal
rpm
Actual Ratio
Helical 11/91
Helical 11/91
Helical 11/91
Helical 13/107
Helical 13/107
Output
Bevel 11/38
Bevel 11/38
Bevel 11/38
Bevel 11/37
Bevel 11/37
Bevel 11/36
rpm
Helical 16/87
Helical 16/87
Helical 16/86
Helical 17/94
Helical 16/84
Helical 16/85
155.40
155.40
153.61
153.08
145.35
143.10
11.6
11.6
11.7
11.8
12.4
12.6
1.06
1.88
3.32
5.69
10.6
16.1
850
1500
2625
4485
7905
11875
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
10.5
Overall Ratio
1800
1500
1200
1000
750
500
250
PB3REDXXXSL*** PB4REDXXXSL*** PB5REDXXXSL*** PB6REDXXXTL*** PB7REDXXXTL*** PB8REDXXXTL***
11.3
9.4
7.5
6.3
4.7
3.1
1.6
Helical 13/107
9.7
9.7
9.8
9.8
10.3
0.89
1.56
2.77
4.74
8.83
13.5
850
1500
2625
4485
7925
11950
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
7.7
7.7
7.8
7.8
8.3
8.4
0.71
1.25
2.21
3.80
7.30
10.9
850
1500
2625
4485
8190
12035
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
6.4
6.4
6.5
6.5
6.9
7.0
0.59
1.04
1.84
3.16
6.26
9.13
850
1500
2625
4485
8425
12100
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
4.8
4.8
4.9
4.9
5.2
5.2
0.44
0.78
1.38
2.37
4.86
6.90
850
1500
2625
4485
8725
12190
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
3.2
3.2
3.3
3.3
3.4
3.5
0.30
0.52
0.92
1.58
3.27
4.64
850
1500
2625
4485
8800
12305
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
1.6
1.6
1.6
1.6
1.7
1.7
0.15
0.26
0.46
0.79
1.65
2.32
850
1500
2625
4485
8905
12310
Efficiency %
97.0
97.0
97.0
97.0
97.0
97.0
IMPORTANT
www.renold.com
47

PM Series - PB Type - Speed Reducer Dimensions

T
C
P
C2
H3
H2
C2
J
RENOLD
B1
D2
H5
D2
H4
B2
J
R
H1
Q
X1
W1
TH
W2
V1
G
Z1
V2
LB
Y1
INPUT SHAFT
DETAILS
OUTPUT SLEEVE
DETAILS
PM Series - PB Reduction Gear

UNIT REF
PB35
PB40
PB50
PB60
PB70
PB80
B
162.0
179.3
183.9
239.6
269.2
278.8
B1
140.0
157.5
195.0
225.0
255.5
280.0
B2
180
210
240
280
335
370
C
314
340
360
469
484
508
H
60
88
88
120
140
140
H1
135
180
180
235
290
310
H2
85
105
125
145
160
170
UNIT REF
PB35
PB40
PB50
PB60
PB70
PB80
J
75
85
100
125
150
150
K
17.0
21.5
21.5
25.5
25.5
25.5
P
251
277
297
356
371
395
Q
274
321
365
418
458
503
R
186
220
250
305
360
360
T
130
151
175
200
225
246
U
25
25
30
35
35
35
V1
W1
X1
Y1
Z1
TH
28j6
24.0
8P9
60
50
M10x22
42k6
37.0
12P9
110
100
M16x36
G
40F7
50F7
60F7
70F7
90F7
100F7
L
103
110
130
155
174
174
LB
65
75
95
130
125
115
V2
43.3
53.8
64.4
74.9
95.4
106.4
W2
12Js9
14Js9
18Js9
20Js9
25Js9
28Js9
H3
160
200
230
270
310
340
H4
120
140
160
190
240
256
H5
205
235
280
340
412
460
Input Shaft
UNIT REF
PB35
PB40
PB50
PB60
PB70
PB80
Output Sleeve
UNIT REF
PB35
PB40
PB50
PB60
PB70
PB80
www.renold.com
48
UNIT REF
PB35
PB40
PB50
PB60
PB70
PB80
C2
190
220
260
305
355
355
D2-SE
40k6
50k6
60m6
70m6
85m6
95m6
D2-DE
39k6
49k6
59m6
69m6
85m6
95m6

T
C2
C3
`8' HOLES
`K1' DIA. ON A
`M' PCD
U1
B1
F
D2
B2
D2 N O
B
U2
Q
X1
W1
TH
W2
V1
V2
Z1
Y1
INPUT SHAFT
DETAILS
LB
OUTPUT SLEEVE
DETAILS
PM Series - PB Reduction Gear - (Horizontal Flange Mounted)

UNIT REF
PB35
PB40
PB50
PB60
PB70
PB80
B
162.0
179.3
183.9
239.6
269.2
278.8
B1
140.0
157.5
195.0
225.0
255.5
280.0
B2
180
210
240
280
335
370
C
314
340
360
469
484
508
E
154
183
197
215
248
248
K1
13.5
17.5
17.5
17.5
17.5
17.5
UNIT REF
PB35
PB40
PB50
PB60
PB70
PB80
P
251
277
297
356
371
395
Q
274
321
365
418
458
503
R
186
220
250
305
360
360
T
130
151
175
200
225
246
U1
13
19
19
19
24
24
U2
4
5
5
5
5
5
M
265
300
350
400
500
500
N
230h8
250h8
300h8
350h8
450h8
450h8
O
300
350
400
450
550
550
Input Housing - Reduction

UNIT REF
PB35
PB40
PB50
PB60
PB70
PB80
V1
W1
X1
Y1
Z1
TH
28j6
24.0
8P9
60
50
M10x22
42k6
37.0
12P9
110
100
M16x30
G
40F7
50F7
60F7
70F7
90F7
100F7
L
103
110
130
155
174
174
LB
65
75
95
130
125
115
V2
43.3
53.8
64.4
74.9
95.4
106.4
W2
12Js9
14Js9
18Js9
20Js9
25Js9
28Js9
Output Sleeve
UNIT REF
PB35
PB40
PB50
PB60
PB70
PB80
www.renold.com
49
UNIT REF
PB35
PB40
PB50
PB60
PB70
PB80
C2
190
220
260
305
355
355
D2-SE
40k6
50k6
60m6
70m6
85m6
95m6
D2-DE
39k6
49k6
59m6
69m6
85m6
95m6

T
`8' HOLES
`K1' DIA. ON A
`M' PCD
X1
W1
TH
V1
B1
F
Z1
INPUT SHAFT
DETAILS
Y1
B2
W2
B
V2
Q
D2
LB
OUTPUT SLEEVE
DETAILS
C2
R
E
C3
U1
U3
D2
N
O
PM Series - PB Reduction Gear - (Vertical Skirt)

UNIT REF
PB35
PB40
PB50
PB60
PB70
PB80
B
162.0
179.3
183.9
239.6
269.2
278.8
B1
140.0
157.5
195.0
225.0
255.5
280.0
B2
180
210
240
280
335
370
C
314
340
360
469
484
508
E
154
183
197
215
248
248
K1
13.5
17.5
17.5
17.5
17.5
17.5
M
265
300
350
400
500
500
UNIT REF
PB35
PB40
PB50
PB60
PB70
PB80
P
251
277
297
356
371
395
Q
274
321
365
418
458
503
R
186
220
250
305
360
360
T
130
151
175
200
225
246
U1
13
19
19
19
24
24
U3
5
6
6
6
6
6
V1
W1
X1
Y1
Z1
TH
28j6
24.0
8P9
60
50
M10x22
42k6
37.0
12P9
110
100
M16x30
G
40F7
50F7
60F7
70F7
90F7
100F7
L
103
110
130
155
174
174
LB
65
75
95
130
125
115
V2
43.3
53.8
64.4
74.9
95.4
106.4
W2
12Js9
14Js9
18Js9
20Js9
25Js9
28Js9
N
230H8
250H8
300H8
350H8
450H8
450H8
O
300
350
400
450
550
550
Input Shaft
UNIT REF
PB35
PB40
PB50
PB60
PB70
PB80
Output Sleeve
UNIT REF
PB35
PB40
PB50
PB60
PB70
PB80
www.renold.com
50
UNIT REF
PB35
PB40
PB50
PB60
PB70
PB80
C2
190
220
260
305
355
355
D2-SE
40k6
50k6
60m6
70m6
85m6
95m6
D2-DE
39k6
49k6
59m6
69m6
85m6
95m6
PM Series - PB Type - Output Shaft Dimensions

L2
L1
C2
Z2
Z3
Y2
C2
Y3
Z3
Y2
Z2
Y3
Y5
D4 D3
D2
D5
D5
L
L
X2
X2
GL
GL
L3
L4
C3
Y2
Z3
X5
DOUBLE EXTENSION PLUG-IN SHAFT
SINGLE EXTENSION PLUG-IN SHAFT
Z2
Z5
D4 D3
C3
Y3
Z2
Y2
Z3
Y3
Y5
D4 D3
Z5
D4 D3
D2
D5
D5
L5
L5
X2
GL
X2
SINGLE EXTENSION PLUG-IN SHAFT - (FLANGED)

V2
W2
GL
X5
DOUBLE EXTENSION PLUG-IN SHAFT - (FLANGED)
V5 TH5
TH
W5
GD
GW
D2 EXTENSION D5 EXTENSION
EXTENSION KEYWAY DETAILS
CIRCLIP GROOVE DETAILS
Plug-in Shafts
UNIT REF
PB35
C2
190
C3
234
L
7
L1
300.5
L2
380
L3
344.5
L4
424
L5
51
PB40
220
283
10
337.5
440
400.5
503
73
PB50
260
317
10
398.5
520
455.5
577
67
PB60
305
355
10
469.5
610
519.5
660
60
PB70
355
418
11
538.5
710
601.5
773
74
PB80
355
418
11
538.5
710
601.5
773
74
UNIT REF
PB35
PB40
PB50
PB60
PB70
PB80
D2
40k6
50k6
60m6
70m6
85m6
95m6
V2
35.00
44.50
53.00
62.50
76.00
86.00
W2
12P9
14P9
18P9
20P9
22P9
25P9
X2
80
100
120
140
170
170
Y2
70
90
110
125
160
160
Z2
5
5
5
5
5
5
TH
M16x36
M16x36
M20x42
M20x42
M20x42
M24x50
D3
40h6
50h6
60h6
70h6
90h6
100h6
UNIT REF
PB35
PB40
PB50
PB60
PB70
PB80
D4
38
48
58
68
88
96
D5
39k6
49k6
59m6
69m6
85m6
95m6
V5
34.00
43.50
52.00
61.50
76.00
86.00
W5
12P9
14P9
18P9
20P9
22P9
25P9
X5
80
100
120
140
170
170
Y5
70
90
110
125
160
160
Z5
5
5
5
5
5
5
TH5
M16x36
M16x36
M20x42
M20x42
M20x42
M24x50
www.renold.com
51
GD
37.50
37.25
47.00
46.75
57.00
56..7
67.00
66.70
86.50
86.15
96.50
96.15
GL
207.65
207.60
222.15
222.10
262.15
262.10
312.65
312.60
351.15
351.10
351.15
351.10
Y3
63
80
100
125
140
125 *
Z3
3
3
3
3
3
3
*Two Keys
GW
1.99
1.85
2.29
2.15
2.29
2.15
2.79
2.65
3.33
3.15
3.33
3.15
PM Series - PB Type - Torque Restraint Bracket

F
E
A
D
D1
Note Positions L4 & R2

Check clearance with motor adaptor
or input housing/coupling
L3
R3
R4
L2
L1
R1
L3
R3
R4
L2
L1
R1
Torque Restraint Bracket

UNIT SIZE
PB35
PB40
PB50
PB60
PB70
PB80
A
240
270
300
360
415
450
B
68.0
102.0
116.0
134.5
159.5
159.5
C
70
70
70
66
66
66
D
20
20
20
30
30
30
D1
70
70
70
80
80
80
E
180
210
240
280
335
370
www.renold.com
52
F
97
131
145
160
185
185
G
12
12
12
15
15
15
R
45
45
45
52
52
52
PM Series - PB Type - Shrink Disc Dimensions
L
SCREW `K' TIGHTEN
TO TORQUE `TQ'
A
G
L4
D1
L5
d2
D2
D3
CHF
RAD
L1
L2
L3
Shrink Disc
UNIT SIZE
PB35
PB40
PB50
PB60
PB70
PB80
D1
44g6
57g6
62g6
80g6
90g6
100g6
D2
42
55
60
75
85
95
Driven Shaft Details

D3
L1
L2
42g6
25
137
55g6
30
150
60g6
35
174
75g6
40
211
85g6
45
250
95g6
45
250
L3
80
80
95
115
135
135
RAD
1.5
1.5
1.5
1.5
2
2
A
102.9
110
130
155
174
174
D1
44H7
57H7
62H7
80H7
90H7
100H7
Hollow Shaft Details

L
d2
D3
43
42H6
242
56
55H6
260
304
60H6
61
78
75H7
366
88
85H7
430
430
95H7
98
L4
35
40
50
55
60
60
L5
137
150
174
211
250
259
REF
50-4071
68-4071
75-4071
100-4071
125-4071
125-4091
125-4071
125-4091
E
50
68
75
100
125
125
125
125
Shrink Disc Details

H
G
F
90
27.5
6
115
30.5
6
138
32.5
9
170
44
9
215
54
23
65
12
215
23
54
215
215
65
12
K
M6
M6
M8
M8
M10
M12
M10
M12
UNIT SIZE
PB35
PB40
PB50
PB60
PB70
PB80
UNIT SIZE
PB35
PB40
PB50
PB60
PB70
PB80
www.renold.com
53
CHF
2
3
3
3
3
3
Max.
TQ Nm Torque Nm
12
690
12
1250
30
1600
30
3750
59
5500
100
7500
59
7500
100
10000
PM Series - PB Type - Torque Arm Assembly
C
G
H - 2 HOLES
B
E
D
F
A
Torque Arm Assembly

UNIT SIZE
PB35
PB40
PB50
PB60
PB70
PB80
A
600
750
600
750
600
750
910
760
910
760
910
760
B
75
C
108
D
35
E
13
F
40
G
41
H
M12
90
133
40
14
45
52
M16
90
133
40
14
45
52
M16
115
178
57
21
55
76
M20
115
178
57
21
55
76
M20
115
178
57
21
55
76
M20
www.renold.com
54
PM Series - Installation, Maintenance & Storage

Initial Running
Couplings and Bedplates
All units are supplied without oil.
All couplings should be carefully fitted and shafts accurately

aligned. To prevent damage to the bearings, coupling half-bodies
should not be hammered onto shafts.
Gear units and other drive components should be rigidly mounted
on firm foundations to prevent movement and vibration which may
affect the alignment of the shafts. Suitable bedplates can be
supplied if required.
First Filling
When installed and before running, the unit should be filled with
new lubricant to the correct level as follows.
With the gear stationary, remove the filler and breather plug and
oil level plug. Fill until the lubricant level is visible at the indicator (if
fitted) or until lubricant overflows from oil level aperture.
Replace and secure both plugs. Care should be taken to avoid
overfilling, as this may cause subsequent leakage.
Abnormal Ambient Temperatures

If the gear unit is to be operated under extremes of temperature or
humidity, special oils may be required and recommendations will be
made on request.
Starting Up
All units have been subjected to a short test before despatch to the
customer but it takes many hours running under full load for the
gear to attain its highest efficiency. The gear may if necessary be
put to work immediately on full load, but if circumstances permit it
is better for the ultimate life of the gear to run it in under gradually
increasing load. Attaining the full load after about 20 to 40 hours.
Reasonable precautions should however, be taken to avoid
overloads in the early stage of running. Temperature rise on the
initial run will be higher than that eventually attained after the
gear is fully run in.
Storage
All gear units stored or left inactive for long periods should be
adequately protected, particularly those on exposed sites and those
operating in corrosive atmospheres.
The following precautions will generally be adequate, but advice on
the protection of particular units will be given, if required.
If empty of oil: spray the gear case interior with rust preventative
oil; compatible with lubricant recommended for service conditions.
If filled with oil: operate at full speed once per month for not less
than 10 minutes to ensure liberal coating of all internal parts
with oil.
For indefinite storage: completely fill unit with oil ensuring
complete submersion of all internal components and shafts should
be occasionally turned by hand. When unit is returned to service,
drain and refill with new oil to correct level.
Routine Maintenance
The oil level in the unit should be regularly maintained, and should
be checked at least once a month. To avoid false readings,
examination of the oil level should be made with the gear
stationary, and to maintain free ventilation of the unit under all
conditions, the breather hole in the filler plug should be kept clear
at all times.
External shaft extensions and oil seals can be protected by the use
of grease impregnated tape. Full long term storage specification
details can be obtained from Renold on request.
Changing Oil
Spare Parts
The oil should be changed completely at intervals depending upon

the working conditions.
Information relating to spare parts is available on request.
Grease Lubrication of Bearings

Where this feature is included, the bearing caps are fitted with a
grease nipple or stauffer lubricator, which should be used to
lubricate the bearings.
www.renold.com
55
PM Series - PB Type - Lubrication Information

The correct fill of oil for the unit size and mounting position can be found in
either the appropriate catalogue or the Installation and Maintenance Guide.
Only good quality oils should be used, such as those listed below, as the use
of inferior or unsuitable products may cause rapid wear and possible
damage to the gearbox.
Using too a heavy a grade than required will result in reduced efficiency, too
light a grade will result in premature wear, if in doubt ask Renold Gears
Technical Department. Heavy grade oils are shown for reference only.
Oils with three viscosity ranges (Light, medium and heavy) are listed below,
the correct choice depends on the application operating speed, load and
temperature. Temperature and speed can often be the main factor as it
effects the operating viscosity.
There are three main oils Mineral, Synthetic (Polyalphaolefin) and Synthetic
(Polyglycol). Mineral oils tend to be cheaper, have a lower life and are less
efficient. Synthetic (Polyalphaolefin) can operate over a higher temperature
range, are more efficient and have a longer life.
Which Oil to Select
If the unit runs below the catalogue rating and operates at a temperature
below 60C then a light grade oil should be used. Operating at catalogue
rating with temperatures up to 100C require medium grade.
Mineral Oil
Mobil Gear *
Mobil Gear XMP
Castrol Alpha SP *
Castrol AlphaMax
Shell Omala F
Shell Omala
Esso Spartan EP
Kluberoil GEM 1
630
220
220
220
220
220
220
220
Light
TempC
-13 to 90
-13 to 100
-21 to 120
-24 to 120
-9 to 120
-9 to 120
-30 to 120
-18 to 100
630
220
220
220
220
220
220
Light
TempC
-42 to 160
-42 to 160
-42 to 150
-36 to 150
-40 to 150
-27 to 120
-30 to 160
Synthetic (Polyalphaolefin)
Mobil Gear SHC *
Mobil Gear SHC XMP
Castrol Alpha EP
Castrol Alpha T
Shell Omala HD
Esso Spartan Synthetic EP
Klubersynth EG 4
The use of Synthetic (Polyglycol) are not recommended without prior

discussion with Renold as special paints and seals are required.
If necessary a list of recommended food grade oils is available on request.
632
320
320
320
320
320
320
320
Medium
TempC
-13 to 90
-13 to 100
-21 to 120
-18 to 120
-9 to 120
-9 to 120
-27 to 120
0 to 100
632
320
320
320
320
320
320
Medium
TempC
-42 to 160
-42 to 160
-36 to 150
-33 to 150
-40 to 150
-27 to 120
-30 to 160
634
460
460
460
460
460
460
460
Heavy
TempC
-1 to 90
-1 to100
-6 to 120
-15 to 120
-9 to 120
-9 to 120
-18 to 120
0 to 100
634
460
460
460
460
460
460
Heavy
TempC
-39 to 160
-39 to 160
-20 to 150
-33 to 150
-40 to 150
-18 to 120
-25 to 160
HH
460
460
460
460
Heavy
TempC
2 to 90
-9 to 120
-15 to 120
-9 to 120
0 to 100
634
460
460
460
Heavy
TempC
-39 to 160
-33 to 80
-40 to 80
-30 to 150
If a Sprag Clutch backstop is fitted internally to the gear unit, oils with EP type additives must not be used.
The oils shown below are all suitable for use with Sprag Clutch backstops
Mineral Oil
Mobil DTE
Castrol Alpha ZN
Shell Vitrea
Esso Teresso
Kluberoil GEM 1
BB
220
220
220
220
Light
TempC
-7 to 90
-9 to 120
-24 to 120
-18 to 120
-18 to 100
630
220
220
220
Light
TempC
-42 to 160
-36 to 80
-40 to 80
-42 to 150
Synthetic (Polyalphaolefin)
Mobil Gear SHC
Castrol Alpha T
Shell Omala RL
Esso Teresso SHP
AA
320
320
320
320
Medium
TempC
2 to 90
-9 to 120
-18 to 120
-12 to 120
0 to 100
632
320
320
320
Medium
TempC
-42 to 160
-33 to 80
-40 to 80
-36 to 150
Oils specifications can vary world wide therefore it may be necessary to check locally with your oil supplier.
www.renold.com
56
PM Series - PB Type - Oil Capacities
PM Series PB Helical/Bevel/Helical Oil Quantities (Litres)

UNIT
REF
Underdriven
PB35
PB40
PB50
PB60
PB70
PB80
1.2
1.7
2.8
5.1
7.5
9.1
Over driven
Normal Speed
Slow Speed
2.6
3.6
6.6
10.2
14.9
17.6
4.3
5.6
11.0
18.0
26.0
30.0
Nominal oil quantity - May vary with ratio

www.renold.com
57
Vertical Output
VA - VQ
WA - WG
1.5
2.5
5.2
6.6
12.0
14.0
Mounting posn
VS - VY & V1 - V7
WJ - WQ
3.0
4.2
7.7
12.8
17.7
22.5
PM Series - PB Type - Unit Weights

PM Series PB Bevel/Helical Weights (kg)
PB35
PB35-Red'n gear
PB35 + MD80K
PB35 + MD80G
PB35 + MD90S
PB35 + MD90L
PB35 + MD100L
PB35 + MD100LX
PB35 + MD112M
PB35 + MD132S
PB35 + MD132M
PB40
PB40-Red'n gear
PB40 + MD80K
PB40 + MD80G
PB40 + MD90S
PB40 + MD90L
PB40 + MD100L
PB40 + MD100LX
PB40 + MD112M
PB40 + MD132S
PB40 + MD132M
PB50
PB50-Red'n gear
PB50 + MD80K
PB50 + MD80G
PB50 + MD90S
PB50 + MD90L
PB50 + MD100L
PB50 + MD100LX
PB50 + MD112M
PB50 + MD132S
PB50 + MD132M
PB50 + MD160M
PB50 + MD160L
Hollow
Shaft
65
76
76
79
82
89
92
98
115
133
Foot Mounting
Single
Double
Extension Extension
68
69
79
79
79
80
82
83
85
85
92
92
95
96
101
102
118
119
136
136
Flange Mounting
Hollow
Single
Double
Shaft
Extension Extension
70
74
75
81
85
85
82
85
86
85
88
89
87
91
91
94
98
98
98
101
102
104
107
108
121
124
125
138
142
142
Hollow
Shaft
70
81
81
84
87
94
98
104
120
138
Vertical Output
Single
Double
Extension Extension
74
75
84
85
85
86
88
89
90
91
97
98
101
102
107
108
124
125
141
142
Hollow
Shaft
86
97
97
100
103
110
114
120
136
154
Foot Mounting
Single
Double
Extension Extension
91
93
102
108
103
109
105
112
108
115
115
122
119
125
125
131
141
148
159
166
Flange Mounting
Hollow
Single
Double
Shaft
Extension Extension
97
104
105
108
114
116
108
115
117
111
118
119
114
120
122
121
127
129
125
131
133
131
137
139
147
154
155
165
172
173
Hollow
Shaft
97
107
108
111
113
120
124
130
147
165
Vertical Output
Single
Double
Extension Extension
103
105
114
115
115
116
118
119
120
122
127
128
131
132
137
138
154
155
171
173
Hollow
Shaft
127
137
138
141
143
150
154
160
177
194
255
275
Foot Mounting
Single
Double
Extension Extension
135
138
146
148
146
149
149
152
152
154
159
161
163
165
169
171
185
188
203
205
264
266
284
286
Flange Mounting
Hollow
Single
Double
Shaft
Extension Extension
140
151
153
151
161
163
151
162
164
154
165
167
157
167
169
164
174
176
168
178
180
174
184
186
190
201
203
208
218
221
269
280
282
289
300
302
Hollow
Shaft
139
150
151
154
156
163
167
173
190
207
268
288
Vertical Output
Single
Double
Extension Extension
150
152
160
163
161
163
164
166
167
169
174
176
177
180
183
186
200
202
218
220
279
281
299
301
www.renold.com
58
PM Series - PB Type - Unit Weights

PM Series PB Bevel/Helical Weights (kg)
PB60
PB60-Red'n gear
PB60 + MD100L
PB60 + MD100LX
PB60 + MD112M
PB60 + MD132S
PB60 + MD132M
PB60 + MD160M
PB60 + MD160L
PB60 + MD180M
PB60 + MD180L
PB60 + MD200L
PB70
PB70-Red'n gear
PB70 + MD100L
PB70 + MD100LX
PB70 + MD112M
PB70 + MD132S
PB70 + MD132M
PB70 + MD160M
PB70 + MD160L
PB70 + MD180M
PB70 + MD180L
PB70 + MD200L
PB80
PB80-Red'n gear
PB80 + MD100L
PB80 + MD100LX
PB80 + MD112M
PB80 + MD132S
PB80 + MD132M
PB80 + MD160M
PB80 + MD160L
PB80 + MD180M
PB80 + MD180L
PB80 + MD200L
Hollow
Shaft
211
232
236
242
261
279
333
353
387
401
452
Foot Mounting
Single
Double
Extension Extension
225
229
246
250
250
254
256
260
275
279
293
296
347
351
367
371
401
405
415
419
466
470
Flange Mounting
Hollow
Single
Double
Shaft
Extension Extension
228
244
247
249
265
269
253
269
273
259
275
279
278
294
298
295
311
315
350
366
370
370
386
390
404
420
424
418
434
438
469
485
489
Hollow
Shaft
227
248
252
258
277
295
349
369
403
417
468
Vertical Output
Single
Double
Extension Extension
243
247
264
268
268
272
274
278
293
297
311
314
365
369
385
389
419
423
433
437
484
488
Hollow
Shaft
297
319
323
329
348
365
420
440
474
488
540
Foot Mounting
Single
Double
Extension Extension
323
331
345
352
348
356
354
362
374
381
391
399
445
453
465
473
499
507
513
521
566
573
Flange Mounting
Hollow
Single
Double
Shaft
Extension Extension
323
354
361
345
375
383
349
379
386
355
385
392
374
404
411
391
421
429
446
476
483
466
496
503
500
530
537
514
544
551
566
596
604
Hollow
Shaft
322
344
347
353
373
390
444
464
498
512
565
Vertical Output
Single
Double
Extension Extension
352
360
374
381
378
385
384
391
403
410
420
428
475
482
495
502
529
536
543
550
595
602
Hollow
Shaft
365
386
390
396
415
432
487
507
541
555
607
Foot Mounting
Single
Double
Extension Extension
390
398
412
420
416
423
422
429
441
448
458
466
513
520
533
540
567
574
581
588
633
640
Flange Mounting
Hollow
Single
Double
Shaft
Extension Extension
395
432
441
416
453
463
420
457
466
426
463
472
445
482
491
463
499
509
517
554
563
537
574
583
571
608
617
585
622
631
637
674
683
Hollow
Shaft
394
415
419
425
444
461
516
536
570
584
636
Vertical Output
Single
Double
Extension Extension
430
440
452
461
456
465
462
471
481
490
498
508
553
562
573
582
607
616
621
630
673
682
www.renold.com
59
Notes
www.renold.com
60
Notes
www.renold.com
61
Worldwide Sales and Services

ARGENTINA
BELGIUM
EL SALVADOR
ISRAEL
Bennett Anderson,
Gonzales Y Cia SA, J.Aguero 1817
(1605) Munro
Buenos Aires
Tel: + 54 11 4761 5007/ 3531
Fax: + 54 11 4760 0866
Renold Continental Ltd

Alle Verte 1,1000 Brussel.
Tel: +32 (0) 2 2011262
Fax: +32 (0) 2 2032210
Email: info@renold.be
MVA & Cia

Residencial San Luis,
Avenida 4 #45 Block 2,
San Salvador,
El-Salvador, Central America
Tel: + 503 274 649
Technica J. Bokstein Co. Ltd,

3 Hatrupa Street,
Netanya 42504
Tel: + 972 9 8850505
Fax: + 972 36131074
Los Ases Ketten SA,

Avda Gaona 4046,
1407 Buenos Aires
Tel: + 54 116710855
Fax: + 54 116713141
AUSTRALIA
Renold Australia Proprietary Ltd
508-520 Wellington Road,
Mulgrave, Victoria 3170, Mulgrave
North
Tel: +61 (0) 3 9262 3333
Fax: +61 (0) 3 9561 8561
Branch Tel: +61 (0) 3 9262 3355
Email: melcag@renold.com.au
Unit 1,
12-18 Victoria Street, Lidcombe,
Sydney, NSW 2141.
Tel: +61 (0) 2 9649 3122
Fax: +61 (0) 2 9646 1295
Email: nswsales@renold.com.au
Unit 10,
31 Boyland Avenue,
Coopers Plains, Brisbane,
Queensland 4108.
Tel: +61 (0) 7 3275 2155
Fax: +61 (0) 7 3875 1779
Corner Orsmond & George Sts.
Hindmarsh, Adelaide,
South Australia 5007.
Tel: +61 (0) 8 8346 9077
Fax: +61 (0) 8 8340 1217
Unit 2,
127 Grandstand Street, Belmont,
Perth, West Australia 6104.
Tel: +61 (0) 8 9479 1388
Fax: +61 (0) 8 9479 1364
Unit 13
56 Industrial Drive,
Mayfield, NSW 2304
Tel: +61 (0) 2 4960 8440
Fax: +61 (0) 2 4960 8455
PO Box 159,
Unanderra, Wollongong, NSW 2526.
Tel: +61 (0) 2 42 621771
Fax: +61 (0) 2 42 621772
Shop B,
247 Ingham Road,
Garbutt, Townsville, QLD 4814.
Tel: +61 (0) 7 4779 5922
Fax: +61 (0) 7 4775 1446
AUSTRIA
Renold GmbH
Rudolf Hausner Gasse 60/1
A-1220 Wien
Austria.
Tel: +43 (0) 1 3303484 0
Fax: +43 (0) 1 3303484 5
BANGLADESH
Brady & Co (Bangladesh) Ltd,
31, Bangabandhu Avenue,
Dhaka-1000
Tel: + 880 2802358
Fax: + 880 2802358
CANADA
Renold Canada Ltd
121 Roy Boulevard, Brantford,
Ontario, N3T 5N4
Toll Free: 1-800-265-9970
Tel: +1 519 756 6118
Fax: +1 519 756 1767
Email: inquiry@renoldcanada.com
FINLAND
622 rue De Hull,

Ville La Salle,
Quebec, H8R 1V9.
Toll Free: 1-800-361-1414
Tel: +1 514 367 1764
Fax: +1 514 367 4993
Brampton Renold,
Zone Industrielle A, Rue de la
Pointe, BP 359, 59473 Seclin Cedex.
Tel: +33 (0) 320 16 29 29
Fax: +33 (0) 320 16 29 00
Kraftmek Oy,
Hitsaajankatu 9, P.O. Box 36,
FIN-00811 Helsinki
Tel: + 358 9 7557355
Fax: + 358 9 7550414
FRANCE
GERMANY
CHILE
Arnold & Stolzenberg,

Juliusmhle,
D37574 Einbeck.
Postal address:
PO Box 1635 + 1645
D37557 Einbeck.
Tel: +49 (0) 5562 81163
Fax: +49 (0) 5562 81164
Email: arnoldandstolzenberg
@t-online.de
Sargent S.A.,
Avda. Presidente Bulnes No 205,
Casilla 166-D,
Santiago - Chile.
Tel: (56 2) 510 3000
Fax: (56 2) 698 3989
Email: secventas@sargentagricola.cl
CHINA
Renold Transmission (Shanghai)
Company Limited
Unit 4A, Block 15
69 XiYa Road
Waigaoqiao Free Trade Zone
Shanghai 200131
Tel: +86 21 5046 2696
Fax: +86 21 5046 2695
Email: sales@renold.cn
GREECE
Provatas Engineering
53/47 Dragatsaniou St,
185 - 45 Piraeus.
Tel: + 30 1 4170266
Fax + 30 1 4170253
HOLLAND
Renold Continental Ltd,
Jarmuiden 30c,
1046 AD Amsterdam.
Tel: +31 (0) 20 614 6661
Fax: +31 (0) 20 614 6391
Email: info@renold.nl
COLOMBIA
Transmission de Potencia SA
Carrera 68B No10 - 98
Apartado Aereo 6794
Santafe de Bogato DC
Tel: + 571 2600100
Fax: + 571 2904823
HUNGARY
Renold GesmbH
Technical Office, Ing. Havasi Janos,
Ret Utca 25, H-6200 Kiskrs.
Tel: +36 (0) 78 312483
Fax: +36 (0) 78 312484
Importadora Casa Sueca Ltda.,

Calle 52, No. 1N-74,
Apartado Aereo 1208, Cali.
Tel: 00 57 2346 4455
Fax: 00 57 2346 4967
INDIA
CZECH REPUBLIC
Voltas Limited.,
Machine Tool Division,
Voltas House B, 3rd Floor,
TB Kadam Marg,
Chinchpokli,
Mumbai 400033
Tel: 091 22 370 0829
Fax: 091 22 371 4889
Email: mshaik@voltasltd.com
Renold GesmbH
Technical Office, Dipl. Ing. R.
Badura,
Jaroslavice 129, CZ-76001 Zlin.
Tel: +42 67 7211074
Fax: +42 67 7211074
DENMARK
Renold A/S,
Skelmarksvej 6, Postboks 90,
2605 Brndby.
Tel: +45 43 452611
Fax: +45 43 456592
Email: infor@renold.com
NORTHERN IRELAND
Henry R. Ayton Ltd,
Derriaghy, Dunmurry, Belfast.
Tel: 01232 618511
Fax: 01232 602436
EGYPT
Itaco,
Intl for Trading & Agency,
P.O. Box 7550, Nasr City, Cairo.
Tel: + 20 2 2718036
Fax: + 20 2 2878089
SOUTHERN IRELAND
Henry R. Ayton Ltd.,
Broomhill Drive, Tallagh, Dublin 24
Tel: + 353 (0) 1 4517922
Fax: + 353 (0) 1 4517922
www.renold.com
62
ITALY
Bianchi Cuscinetti SpA
Via Zuretti, 102, 20125 Milano,
Tel: + 39 02 67861
Fax: + 39 02 66981669
JAMAICA
Masterton Ltd,
21-25 Hanover Street, P.O. Box 73
Kingston.
Tel: + 18 767 540557
Fax: + 18 769 227807
KOREA
S.S. Corporation,
Yeouido, P.O. Box 60, Seoul.
Tel: 00-822-783-6829
Fax: 00-822-784-9322
Email: sslcorp@chollian.net
MALAYSIA
Renold (Malaysia)
LOT 2, Jalan Kecapi 33/2,
Eilte Industrial Park,
Off Jalan Bukit, Kemuning,
40400 Shah Alam, Selangor,
Malaysia.
Tel: + 60 3 5122 9880
Fax: + 60 3 5191 9881
Email: malaysia@renold.com
201, Jalan Simbang,
Taman Perling,
81200 Joho Bharu, Johor, Malaysia.
Tel: + 60 (0) 7 2384152-3
Fax: + 60 (0) 7 2384155
67A, Jalan Medan Ipoh 6,
Bandar Baru Medan,
31400 Ipoh, Perak
Tel: + 60 (0) 5 548 0059
Fax: + 60 (0) 5 548 0214
28B Jalan Perai Jaya 3,
Bandar Perai Jaya,13600 Perai,
Penang, Malaysia
Tel: + 604-399 9648
Tel: + 604-399 0648
Fax: + 604-399 5649
MAURITIUS
Dynamotors Ltd,
P.O. Box 733, Bell Village,
Tel: + 230 2122847/8/9
Fax: + 230 2088348
MEXICO
Accessorios Automotrices y
Rodamientos Industriales,
S.A. de C.V., Calz Legaria 833-A
Col Irigacion, Mexico DF 11500
Tel: + 52 5 395 6300
Fax: + 52 5 395 6370
Worldwide Sales and Services

NEW ZEALAND
SOUTH AFRICA
TURKEY
USA
Renold New Zealand,

594 Rosebank Road,
Avondale, Auckland.
Renold Croft (Pty) Limited,

Corner Liverpool and Bolton Streets,
Nestadt Industrial Sites, Benoni, 1501
Postal Address: Private Bag x 030,
Benoni, 1500.
Tel: + 27 (0) 11 747 9500
Fax: + 27 (0) 11 747 9505
E-mail: renold@iafrica.com
Glengo Ithalat lhracat Mumessillik

AS,
Gungoren Cad. No. 35 Bagcilar,
34560
Bakirkoy, Istanbul.
Tel: + 90 212 4613970
Fax: + 90 212 4613972
www.glengo.com.tr
Renold Inc
Bourne Street, PO Box A, Westfield,
New York, 14787-0546
Tel: + 1 716 326 3121
Fax: + 1 716 326 6121
E-mail: renold@cecomet.net
P.O. Box 2661, Witbank 1035,

Mpumalanga,
Republic of South Africa.
Tel: +27 (0) 13 692 7760
Fax: +27 (0) 13 697 0546
Email: renoldwit@worldonline.co.za
UNITED KINGDOM
Postal Address:
PO Box 19460,
Avondale, Auckland.
Tel: + 64 (0) 9 828 5018
Fax: + 64 (0) 9 828 5019
Email: aksales@renold.co.nz
Christchurch Branch Office,
32 Birmingham Drive, Christchurch,
PO Box 9006, Christchurch,
Tel: + 64 03 338 2169
Fax: + 64 03 338 8663
SPAIN
NORWAY
G. Heier A/S,
Postal Address: Postboks 6615,
Rodelokka, 0502 Oslo, Norway.
Office Address: Thv, Meyersgt.
7, Oslo.
Tel: + 47 232 34230
Fax: + 47 232 34242
PAKISTAN
Brady & Co. of Pakistan Ltd,
Shernaz House, P.O. Box 4453,
West Wharf Road, Karachi 2.
Tel: + 92 21.2310367/201712
Fax: + 92 21.2313376/2313378
PERU
Corporacion Basco S.A.C.
Av. Argentina 1165,
Lima 1, RUC 25776186.
Tel: + 51 1 4336633
Fax: + 51 1 4313188
PORTUGAL
Harker, Sumner, S.A.
Zona Industrial Maia 1 - Sector X
4475 - 132 Gemunde - Maia
Portugal.
Tel: + 351 229 4478 090
Fax: + 351 229 4478 098
E-mail: accionamantos.ind@harker.pt
SINGAPORE
Renold Transmission Limited
63 Hillview Avenue, #07-13,
Lam Soon Industrial Building,
Singapore 669569.
Tel: + 65 6760 2422
Fax: + 65 6760 1507
E-mail: renold@mbox5.singnet.com.sg
Brown Pestell,
Ctra N-11 Lm. 599.5 Nave 5,
08780 Palleja, Barcelona.
Tel: + 34 93 6630740
Fax: + 34 93 6632057
Renold Gears
Holroyd Gears Works, Milnrow,
Rochdale OL16 3LS
Tel: +44 (0) 1706 751000
Fax: +44 (0) 1706 751001
E-mail: sales@gears.renold.com
Web: www.renold.com
VENEZUELA
Equipos Y Acessorios Astral CA,
Apartado 1651 Valencia.
Tel: + 584 1 332042
Fax: + 584 1 345641
WEB
www.renold.com
Renold Clutches & Couplings

Wentloog Corporate Park,
Newlands Road,
Cardiff CF3 2EU, Wales
Tel: + 44 (0) 29 20792737
Fax: + 44 (0) 29 20793004
(Sales):+ 44 (0) 29 20791360
E-mail: couplings@cc.renold.com
Web: www.renold.com
SWEDEN
Renold A/S
Skelmarksvej 6, Postboks 90
2605 Brndby
Denmark.
Tel: + 45 43 452611
Fax: + 45 43 456592
E-mail: infor@renold.com
SWITZERLAND
Renold (Switzerland) Gmbh,
Ringstrasse 16, Postfach 1115
CH-8600 Dbendorf 1.
Tel: + 41 (0) 44 824 84 84
Fax: + 41 (0) 44 824 84 11
E-mail: duebendorf@renold.com
Route De Prilly 25,
CH-1023 Crissier.
Tel: + 41 (0) 21 632 94 60
Fax: + 41 (0) 21 632 94 75
E-mail: crissier@renold.com
Renold Hi-Tec Couplings

112 Parkinson Road
Halifax HX1 3QH
Tel: +44 (0) 1422 255000
Fax: +44 (0) 1422 320273
E-mail: sales@hitec.renold.com
Web: www.renold.com
Renold Chain
UK Sales, Horninglow Road,
Burton upon Trent,
Staffordshire, DE14 2PS.
Tel: +44 (0) 1283 512 940
Fax: +44 (0) 1283 512 628
E-mail: enquiry@renold.com
THAILAND
United Power Engineering Co Ltd
4 Soi Sukhumvit 81 (Siripot)
Sukhumvit Road
Bangjak, Phrakhanong
Bangkok 10260.
Tel: + 66 2 7425366
Fax: + 66 2 7425379
TRINIDAD
Tracmac Engineering Ltd,
P.O. Box 945, Port of Spain,
Trinidad, West Indies.
Tel: + 1 665 460 1532
Fax: + 1 868 671 0012
Terms and Conditions

In the interests of safety, customers are reminded that when purchasing any
technical product for use at work (or otherwise), any additional or up-to-date
information and guidance, which it has not been possible to include in the
publication, should be obtained by you from your local sales office in relation to the
suitability and the safe and proper use of the product. All relevant information and
guidance must be passed on by you to the person engaged in, or likely to be
affected by or responsible for the use of the product
The performance levels and tolerances of our product stated in this catalogue
(including without limitation, serviceability, wearlife, resistance to fatigue,
corrosion protection) have been verified in a programme of testing and quality
control in accordance with Renold, independent and/or international standard
recommendations. No representations or warranties are given that our product
shall meet the stated performance levels or tolerances for any given application
outside the performance levels and tolerances for the products own specific
application and environment.
Whilst all reasonable care in compiling the information contained in this

catalogue is taken, no responsibility is accepted for errors.
All information contained in this catalogue is subject to change without notice.
The illustrations used in this catalogue represent the type of product described
but the goods supplied may vary in some detail from those illustrated.
The right is reserved to make modifications to the product to meet
manufacturing conditions and/or developments (for example in design or
materials).
Product can be supplied by Renold companies or representatives around the
world on the standard terms and conditions of sale of the company or
representative from which the product is purchased.
Copyright Renold Power Transmission Limited 2001. All rights reserved.
Nothing contained in this publication shall constitute a part of any contract, express
or implied.
www.renold.com
63
AUSTRALIA
Melbourne (Victoria)
Tel + 61 (03) 9262 3333
Fax + 61 (03) 9561 8561
also at: Sydney, Brisbane, Adelaide, Perth,
Newcastle, Wollongong, Townsville.
GERMANY
Einbeck
Tel + 49 (0) 5562 81163
Fax +49 (0) 5562 81164
also at: Bielefeld, Dsseldorf,
Kornwestheim.
AUSTRIA
Vienna
Tel + 43 (0) 13303484-0
Fax + 43 (0) 13303484-5
also at: Kiskrs (Hungary), Jaroslavice
(Czech Republic).
KOREA
Seoul
Tel + 822 783 6829
Fax +822 784 9322
BELGIUM
Brussels
Tel + 32 (0) 2 201 1262
Fax + 32 (0) 2 203 2210
CANADA
Brantford (Ontario)
Tel + 1 519 756 6118
Fax + 1 519 756 1767
also at: Montreal.
CHINA
Shanghai
Tel + 21 5046 2696
Fax + 21 5046 2695
DENMARK
Brndby (Copenhagen)
Tel + 45 43 45 26 11
Fax + 45 43 45 65 92
FRANCE
Seclin
Tel + 33 (0) 320 16 29 29
Fax + 33 (0) 320 16 29 00
MALAYSIA
Selangor Darul Ehsan
Tel + 60 3-5191 9880
Fax + 60 3-5191 9881
also at: Johor Bharu, Ipoh, Penang.
NETHERLANDS
Amsterdam
Tel + 31 206 146661
Fax + 31 206 146391
NEW ZEALAND
Auckland
Tel + 64 9 828 5018
Fax + 64 9 828 5019
also at: Christchurch.
SINGAPORE
Singapore
Tel + 65 6760 2422
Fax + 65 6760 1507
SWEDEN
Brndby (Copenhagen)
Tel + 45 43 45 26 11
Fax + 45 43 45 65 92
SWITZERLAND
Dbendorf (Zrich)
Tel + 41 (0) 44 824 84 84
Fax + 41 (0) 44 824 84 11
also at: Crissier (Lausanne).
UK
Renold Gears, Rochdale
Tel + 44 (0) 1706 751000
Fax + 44 (0) 1706 751001
e-mail : gears.sales@renold.com
USA
Westfield NY
Tel + 1 716 326 3121
Fax + 1 716 326 6121
WEB
www.renold.com
E-MAIL
e-mail : gears.sales@renold.com
For other country distributors
please contact Renold UK.
SOUTH AFRICA
Benoni
Tel + 27 11 747 9500
Fax + 27 11 747 9505
also at: Witbank.
CATPB / 11.06
Superior Gear Technology
Renold Power
Transmission Ltd
www.renold.com

PM Series PB 2006

Uploaded by

Copyright:

Available Formats

PM Series PB 2006

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

PM Series PB 2006

Uploaded by

Copyright:

Available Formats

PM Series - PB Type

Bevel-Helical Gear Units

Superior Gear Technology

PM Series - PB Type Product Features

Hardened and profile ground

Hollow output shaft

Speed Reducer and motorised

One piece close grained cast iron gear

Sprag clutch back stop option

Food Process Machinery

ATEX Approval Details

Product Design Variations

Unit Mounting and Handing Details

Electric Motor Specifications

Ordering Designation Code

Selection of PM Series - PB Type Unit

Load Classification by Application

Overhung and Thrust Loads

Motorised Unit - Selection Data

Motorised Unit - Dimensions

Speed Reducer Unit - Overhung and Axial Load Capacities

Speed Reducer Unit - Exact Ratio

Speed Reducer Unit - Selection Data

Speed Reducer Unit - Dimensions

Plug-in Output Shaft Dimensions

Torque Restraint Bracket

Torque Arm Assembly

Installation, Maintenance and Storage

Renold Worldwide Sales and Service

ATEX Approval Details

Gears products for operating in potentially explosive

Gears units are classified as ATEX Group II

The temperature of any external surfaces must not exceed the

PM Series - PB Type Product Specification

PM Series PB Type - Product Design Variations

Motorised unit with hollow output shaft.

Speed reducer unit with

Standard hollow output shaft

PM Series PB Type - Product Design Variations

PM Series - PB type motorised unit

PM Series - PB type speed reducer unit

PM Series - PB Type - Mounting & Handing

No Sprag backstop fitted.

*Sprag backstop fitted.

No Sprag backstop fitted.

*Sprag backstop fitted.

No Sprag backstop fitted.

*Sprag backstop fitted.

No Sprag backstop fitted.

*Sprag backstop fitted.

No Sprag backstop fitted.

*Sprag backstop fitted.

No Sprag backstop fitted.

*Sprag backstop fitted.

* BACKSTOP FITTED TO MOTORISED UNITS - D100 TO D200 FRAME SIZES ONLY

PM Series - PB Type - Mounting & Handing

No Sprag backstop fitted.

*Sprag backstop fitted.

No Sprag backstop fitted.

*Sprag backstop fitted.