Risk Assesment-Construction Site

Page 1
Installation of Propane Gas Burj Dubai

System
Development
TASK
Step Description of
No: Task Step
Material
Unloading to
IGS store at
Dubai Mall site
Mr. Shibu P
Approved By:
HSE Officer
Mr. Gafoor A Project Engineer
HAZARD
INITIAL RISK
Who or
what
Hazard Description & Effect
might be
harmed ?
1.1 Fatality or Damage due to
load drop from the Truck
mounted Crane
Risk Level
1/2/3/4/5
Location
Probability
1/2/3
Work activity:
DATE:
ACTIVITY RISK ASSESSMENT DATA SHEET

Assessment
Designation:
Signature:
Date: 02/09/06
Team
Severity
1/2/3
Ref No: 001/RA/06
CONTROLS
RESIDUAL RISK
Risk Control Measures (Preventive Action)

1.1.1. Check to make sure all safety devices
are working correctly
1.1.2 Lifting equipment must be certified;
color- coded, rated to load capacity
and checked before usage
1.1.3 Ensure there no loose objects inside or

outside load
1.2 Over Lad
People
1.2.3 Before attempting to lift the load check the

load capacity of the Crain and load to be lift
1.3 Lifting lines tag lines failure
1.4Unauthorised person during

the operation
Asset
1.2.1 Load indictor must be working efficiently

and calibrated.
1.3.1 The operator should be a competent

personal
1.3.2 Check the tag before the work begins
1.4.1 Control unauthorised person from the
unloading area
1.4.2 Personal working along with the
unloading activity should wear personal
protective equipmnt properly
CORRECTIVE ACTION
Page 2
TASK
Step Description of
No: Task Step
HAZARD
INITIAL RISK
Who or
what
might be
harmed ?
Painting of the 2.1 Injury to eyes while mixing

Pipe in the Store paint and thinner
2.2 Injury to fingers, if caught
by locking device of cap
People
2.3 Fire
Shifting the pipe

from the IGS
3.1 Vehicle collision
store to work
sport by pick up
Asset
Risk Level
1/2/3/4/5
Burj Dubai
Installation of Propane Gas Development
System
DATE:

Assessment
Designation:
Signature:
Date: 02/09/06
Team
Mr. Shibu P
HSE Officer
Mr.Gafoor A Project Engineer
CONTROLLS
Approved By:
RESIDUAL RISK
Probability
1/2/3
Location
Severity
1/2/3
Ref No: 001/RA/06

Work activity:
2.2.1 Use personal protective equipment

properly
2.3.1 Paint is a flammable equipment so keep

thepaint and thinner away from the
ignition source

2.1.1 Check cap and locking mechanism for
proper working and use suitable tools for
opening .
3.1.1 Park the vehile proper and convenient

place to load
3.1.2 Check the wait of material to be shifted
3.1.3 Obey the speed limits in side the site
3.2 slipping or falling f the pipe
3.2.1 Hook on each side of the pipe
3.3 Injury to the finger, hands or

body part
3.3.1Check the sharp edges on the pipe
3.3.2 Use proper personal protective equipment

3.3.3 keep the shifted pipes in to pipe racks
3.3.4 Use stopper in the rack
CORRECTIVE ACTION
Page 3
Ref No: 001/RA/06

Work activity:
Location

Assessment
Designation:
Signature:
Date: 02/09/06
Team
Mr. Shibu P
HSE Officer
DATE:
Approved By:
Fixing clevis
hanger on the
roof
Who or
what
might be
harmed ?
4.1 Inadequate scaffolding
Risk Level
1/2/3/4/5
INITIAL RISK
Probability 1/2/3
Step Description of
No: Task Step
HAZARD
Severity
1/2/3
TASK
Drilling / Cutting 5.1 Electrical shock, burns if

cable is live
5.2 Tip and fall while working

Asset
when cable are laying down
RESIDUAL RISK
4.1.1Check the scaffolding placed in firm and

right place
4.1.2 check the scaffolding visually

4.1.3 Check the scaffolding inspection tag
validity signature
4.1.4 Use safety harness and hook in
4.1.5 Do not push the scafolding by keeping a
man in top
People
CONTROLLS
5.1.1 Make sure that power is switched off prior

to inspection
5.2.1 Make sure that cables insulation are good.
5.2.2 Make sure that cable are located properly

to prevent tripping hazards.
5.1.3 Do not operate with wet hands or standing
on wet surface
5.2.4 Hold the power tools firmly and carefully.
CORRECTIVE ACTION
Page 4

System
Development
TASK
Step Description of
No: Task Step
DATE
Date: 02/09/06
Approved By:
HAZARD
INITIAL RISK
Who or
what
might be
harmed ?
5.3Injuries to personnel with

moving parts.
Risk Lvel
1/2/3/4/5
Location
Probability
1/2/3
Work activity:

Assessment
Designation:
Signature:
Team
Mr. Shibu P
HSE Officer
Severity
1/2/3
Ref No: 001/RA/06
CONTROLS
RESIDUAL RISK
5.3.1 Only trained person should operate the

power tools.
5.3.2 Make sure all moving parts are properly

guarded
People
Fixing of the
pipe on the
clives hanger
6.1 Fall off the load structure
fitted on the roof while removing crane
by crane or
manuel
5.3.3 Use PPE (safety glasses / goggles)
6.1.1 Review all safe procedure related to crane

movement
6.1.2 Competent personal should give the

signal to the crane operator.
6.2 Load drops due to striking
Asset
against projections
6.3 Injury to fingers with pinch
points or cut with sharp
edge
6.2.1 Make sure that all material loded in the

crane are properly protected by falling
6.2.2 Remove all obstruction from the lifting

place
2
6.3.1 use all personal protective equipment

while lifting
6.3.2 proper communication shall be provided
CORRECTIVE ACTION
Page 5
TASK
Step Description of
No: Task Step
HAZARD
INITIAL RISK
Who or
what
might be
harmed ?
7.1 Damage to body parts
DATE:
Approved By
Date: 02/09/06
Risk Level
1/2/3/4/5

Development
System
Probability 1/2/3
Location

Assessment
Designation:
Signature:
Team
Mr. Shibu P
HSE Officer
Severity
1/2/3
Ref No: 001/RA/06

Work activity:
Welding &
Grinding
Asset
RESIDUAL RISK
7.1.1 Use all personal protective equipment

(welding gloves, face shield and proper
clothing)
7.1.2 Flammable material will be removed

from area where the welding is to be under
taken
People
7.2 Fire
CONTROLS
7.2.1 If the removal of flammable materials is

not practicable . Precautions are to be
taken to reduce the risk of fire
7.2.2 Fire extinguisher is immediately
available in the area of any welding n
operation
7.2.3 Follow WPS procedure and welding to
be carried out Qualified Welder only
CORRECTIVE ACTION
Page 6
7.3 Electrocution
Description of
Task Step
Hazard Description &

Effect
INITIAL RISK
Who or
what
might be
harmed ?
1/2/3
HAZARD
Risk Level
1/2/3/4/5
Step
No:
DATE:
Approved By:

Assessment
Designation:
Signature:
Date: 02/09/06
Team
Mr. Shibu P
HSE Officer
Severity
TASK
Probability
1/2/3
Ref No: 001/RA/06

Work activity:
Location
Instalation of Propane Gas
Burj Dubai
System
Development
7.3.1 Welding return will be firmly connected

to the welding is taking place. This will
be carry out by means of well
constructed earthing clamps only
CONTROLS
RESIDUAL RISK
7.3.2Welding cables and cable joints will be

maintained good condition
7.4.1Grinders should be maintain good
condition and inspected prior to use
People
7.4 Weel burst of grinding
mechine
3
Asset
7.4.2 Guard to be fitted to the grinders

7.4.3 Change of abrasive wheel to be carried
out by trained and authorized personal
using proper disc spanner
7.4.4 Grinding operation will be controlled in order
to prevent the risk of injury to other
personal from spark and metal splinters
CORRECTIVE ACTION
Page 7
7.4.5 House keeping in the areas at grinding

operation to be maintained to a high level
Page 8
Page 9
Page 10
Page 11
Page 12
Page 13
Page 14
Page 15
Page 16
Page 17
Page 18
Page 19
Page 20
Page 21

Risk Assesment-Construction Site

Uploaded by

Copyright:

Available Formats

Risk Assesment-Construction Site

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Risk Assesment-Construction Site

Uploaded by

Copyright:

Available Formats

What are the main hazards identified in the risk assessment?

What are the main hazards identified in the risk assessment?

What risk control measures are outlined for material unloading?

What risk control measures are outlined for material unloading?

Page 1

Installation of Propane Gas Burj Dubai

Mr. Gafoor A Project Engineer

ACTIVITY RISK ASSESSMENT DATA SHEET

Ref No: 001/RA/06

Risk Control Measures (Preventive Action)

1.1.3 Ensure there no loose objects inside or

1.2 Over Lad

1.2.3 Before attempting to lift the load check the

1.3 Lifting lines tag lines failure

1.4Unauthorised person during

1.2.1 Load indictor must be working efficiently

1.3.1 The operator should be a competent

Painting of the 2.1 Injury to eyes while mixing

Shifting the pipe

ACTIVITY RISK ASSESSMENT DATA SHEET

Ref No: 001/RA/06

2.2.1 Use personal protective equipment

2.3.1 Paint is a flammable equipment so keep

Risk Control Measures (Preventive Action)

3.1.1 Park the vehile proper and convenient

3.1.3 Obey the speed limits in side the site

3.2 slipping or falling f the pipe

3.2.1 Hook on each side of the pipe

3.3 Injury to the finger, hands or

3.3.1Check the sharp edges on the pipe

3.3.2 Use proper personal protective equipment

Ref No: 001/RA/06

ACTIVITY RISK ASSESSMENT DATA SHEET

Mr. Gafoor A Project Engineer

4.1 Inadequate scaffolding

Drilling / Cutting 5.1 Electrical shock, burns if

5.2 Tip and fall while working

Risk Control Measures (Preventive Action)

4.1.1Check the scaffolding placed in firm and

4.1.2 check the scaffolding visually

5.1.1 Make sure that power is switched off prior

5.2.1 Make sure that cables insulation are good.

5.2.2 Make sure that cable are located properly

Installation of Propane Gas Burj Dubai

Mr. Gafoor A Project Engineer

5.3Injuries to personnel with

ACTIVITY RISK ASSESSMENT DATA SHEET

Ref No: 001/RA/06

Risk Control Measures (Preventive Action)

5.3.1 Only trained person should operate the

5.3.2 Make sure all moving parts are properly

5.3.3 Use PPE (safety glasses / goggles)

6.1.1 Review all safe procedure related to crane

6.1.2 Competent personal should give the

6.2.1 Make sure that all material loded in the

6.2.2 Remove all obstruction from the lifting

6.3.1 use all personal protective equipment

Mr. Gafoor A Project Engineer

Installation of Propane Gas Burj Dubai

ACTIVITY RISK ASSESSMENT DATA SHEET